1 files changed, 74 insertions, 27 deletions

diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index 9564fb069957..b30e5796cb26 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -67,10 +67,6 @@ module_param(force_i2c, byte, 0);
 MODULE_PARM_DESC(force_i2c,
                  "Initialize the i2c address of the sensors");
 
-static int reset;
-module_param(reset, bool, 0);
-MODULE_PARM_DESC(reset, "Set to one to reset chip on load");
-
 static int init = 1;
 module_param(init, bool, 0);
 MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
@@ -209,6 +205,13 @@ static const u16 w83627hf_reg_temp_over[]	= { 0x39, 0x155, 0x255 };
 #define W83627HF_REG_PWM1 0x5A
 #define W83627HF_REG_PWM2 0x5B
 
+static const u8 W83627THF_REG_PWM_ENABLE[] = {
+        0x04,           /* FAN 1 mode */
+        0x04,           /* FAN 2 mode */
+        0x12,           /* FAN AUX mode */
+};
+static const u8 W83627THF_PWM_ENABLE_SHIFT[] = { 2, 4, 1 };
+
 #define W83627THF_REG_PWM1              0x01    /* 697HF/637HF/687THF too */
 #define W83627THF_REG_PWM2              0x03    /* 697HF/637HF/687THF too */
 #define W83627THF_REG_PWM3              0x11    /* 637HF/687THF too */
@@ -366,6 +369,9 @@ struct w83627hf_data {
         u32 alarms;             /* Register encoding, combined */
         u32 beep_mask;          /* Register encoding, combined */
         u8 pwm[3];              /* Register value */
+        u8 pwm_enable[3];       /* 1 = manual
+                                   2 = thermal cruise (also called SmartFan I)
+                                   3 = fan speed cruise */
         u8 pwm_freq[3];         /* Register value */
         u16 sens[3];            /* 1 = pentium diode; 2 = 3904 diode;
                                    4 = thermistor */
@@ -957,6 +963,42 @@ static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 1);
 static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 2);
 
 static ssize_t
+show_pwm_enable(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+        int nr = to_sensor_dev_attr(devattr)->index;
+        struct w83627hf_data *data = w83627hf_update_device(dev);
+        return sprintf(buf, "%d\n", data->pwm_enable[nr]);
+}
+
+static ssize_t
+store_pwm_enable(struct device *dev, struct device_attribute *devattr,
+          const char *buf, size_t count)
+{
+        int nr = to_sensor_dev_attr(devattr)->index;
+        struct w83627hf_data *data = dev_get_drvdata(dev);
+        unsigned long val = simple_strtoul(buf, NULL, 10);
+        u8 reg;
+
+        if (!val || (val > 3))  /* modes 1, 2 and 3 are supported */
+                return -EINVAL;
+        mutex_lock(&data->update_lock);
+        data->pwm_enable[nr] = val;
+        reg = w83627hf_read_value(data, W83627THF_REG_PWM_ENABLE[nr]);
+        reg &= ~(0x03 << W83627THF_PWM_ENABLE_SHIFT[nr]);
+        reg |= (val - 1) << W83627THF_PWM_ENABLE_SHIFT[nr];
+        w83627hf_write_value(data, W83627THF_REG_PWM_ENABLE[nr], reg);
+        mutex_unlock(&data->update_lock);
+        return count;
+}
+
+static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
+                                                  store_pwm_enable, 0);
+static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
+                                                  store_pwm_enable, 1);
+static SENSOR_DEVICE_ATTR(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
+                                                  store_pwm_enable, 2);
+
+static ssize_t
 show_pwm_freq(struct device *dev, struct device_attribute *devattr, char *buf)
 {
         int nr = to_sensor_dev_attr(devattr)->index;
@@ -1223,6 +1265,11 @@ static struct attribute *w83627hf_attributes_opt[] = {
         &sensor_dev_attr_pwm1_freq.dev_attr.attr,
         &sensor_dev_attr_pwm2_freq.dev_attr.attr,
         &sensor_dev_attr_pwm3_freq.dev_attr.attr,
+
+        &sensor_dev_attr_pwm1_enable.dev_attr.attr,
+        &sensor_dev_attr_pwm2_enable.dev_attr.attr,
+        &sensor_dev_attr_pwm3_enable.dev_attr.attr,
+
         NULL
 };
 
@@ -1366,6 +1413,19 @@ static int __devinit w83627hf_probe(struct platform_device *pdev)
                                 &sensor_dev_attr_pwm3_freq.dev_attr)))
                         goto ERROR4;
 
+        if (data->type != w83627hf)
+                if ((err = device_create_file(dev,
+                                &sensor_dev_attr_pwm1_enable.dev_attr))
+                 || (err = device_create_file(dev,
+                                &sensor_dev_attr_pwm2_enable.dev_attr)))
+                        goto ERROR4;
+
+        if (data->type == w83627thf || data->type == w83637hf
+         || data->type == w83687thf)
+                if ((err = device_create_file(dev,
+                                &sensor_dev_attr_pwm3_enable.dev_attr)))
+                        goto ERROR4;
+
         data->hwmon_dev = hwmon_device_register(dev);
         if (IS_ERR(data->hwmon_dev)) {
                 err = PTR_ERR(data->hwmon_dev);
@@ -1536,29 +1596,6 @@ static void __devinit w83627hf_init_device(struct platform_device *pdev)
         enum chips type = data->type;
         u8 tmp;
 
-        if (reset) {
-                /* Resetting the chip has been the default for a long time,
-                   but repeatedly caused problems (fans going to full
-                   speed...) so it is now optional. It might even go away if
-                   nobody reports it as being useful, as I see very little
-                   reason why this would be needed at all. */
-                dev_info(&pdev->dev, "If reset=1 solved a problem you were "
-                         "having, please report!\n");
-
-                /* save this register */
-                i = w83627hf_read_value(data, W83781D_REG_BEEP_CONFIG);
-                /* Reset all except Watchdog values and last conversion values
-                   This sets fan-divs to 2, among others */
-                w83627hf_write_value(data, W83781D_REG_CONFIG, 0x80);
-                /* Restore the register and disable power-on abnormal beep.
-                   This saves FAN 1/2/3 input/output values set by BIOS. */
-                w83627hf_write_value(data, W83781D_REG_BEEP_CONFIG, i | 0x80);
-                /* Disable master beep-enable (reset turns it on).
-                   Individual beeps should be reset to off but for some reason
-                   disabling this bit helps some people not get beeped */
-                w83627hf_write_value(data, W83781D_REG_BEEP_INTS2, 0);
-        }
-
         /* Minimize conflicts with other winbond i2c-only clients...  */
         /* disable i2c subclients... how to disable main i2c client?? */
         /* force i2c address to relatively uncommon address */
@@ -1655,6 +1692,7 @@ static struct w83627hf_data *w83627hf_update_device(struct device *dev)
 {
         struct w83627hf_data *data = dev_get_drvdata(dev);
         int i, num_temps = (data->type == w83697hf) ? 2 : 3;
+        int num_pwms = (data->type == w83697hf) ? 2 : 3;
 
         mutex_lock(&data->update_lock);
 
@@ -1707,6 +1745,15 @@ static struct w83627hf_data *w83627hf_update_device(struct device *dev)
                                         break;
                         }
                 }
+                if (data->type != w83627hf) {
+                        for (i = 0; i < num_pwms; i++) {
+                                u8 tmp = w83627hf_read_value(data,
+                                        W83627THF_REG_PWM_ENABLE[i]);
+                                data->pwm_enable[i] =
+                                        ((tmp >> W83627THF_PWM_ENABLE_SHIFT[i])
+                                        & 0x03) + 1;
+                        }
+                }
                 for (i = 0; i < num_temps; i++) {
                         data->temp[i] = w83627hf_read_value(
                                                 data, w83627hf_reg_temp[i]);