1 files changed, 313 insertions, 0 deletions

diff --git a/drivers/hwmon/pmbus.h b/drivers/hwmon/pmbus.h
new file mode 100644
index 000000000000..a81f7f228762
--- /dev/null
+++ b/drivers/hwmon/pmbus.h
@@ -0,0 +1,313 @@
+/*
+ * pmbus.h - Common defines and structures for PMBus devices
+ *
+ * Copyright (c) 2010, 2011 Ericsson AB.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef PMBUS_H
+#define PMBUS_H
+
+/*
+ * Registers
+ */
+#define PMBUS_PAGE                      0x00
+#define PMBUS_OPERATION                 0x01
+#define PMBUS_ON_OFF_CONFIG             0x02
+#define PMBUS_CLEAR_FAULTS              0x03
+#define PMBUS_PHASE                     0x04
+
+#define PMBUS_CAPABILITY                0x19
+#define PMBUS_QUERY                     0x1A
+
+#define PMBUS_VOUT_MODE                 0x20
+#define PMBUS_VOUT_COMMAND              0x21
+#define PMBUS_VOUT_TRIM                 0x22
+#define PMBUS_VOUT_CAL_OFFSET           0x23
+#define PMBUS_VOUT_MAX                  0x24
+#define PMBUS_VOUT_MARGIN_HIGH          0x25
+#define PMBUS_VOUT_MARGIN_LOW           0x26
+#define PMBUS_VOUT_TRANSITION_RATE      0x27
+#define PMBUS_VOUT_DROOP                0x28
+#define PMBUS_VOUT_SCALE_LOOP           0x29
+#define PMBUS_VOUT_SCALE_MONITOR        0x2A
+
+#define PMBUS_COEFFICIENTS              0x30
+#define PMBUS_POUT_MAX                  0x31
+
+#define PMBUS_FAN_CONFIG_12             0x3A
+#define PMBUS_FAN_COMMAND_1             0x3B
+#define PMBUS_FAN_COMMAND_2             0x3C
+#define PMBUS_FAN_CONFIG_34             0x3D
+#define PMBUS_FAN_COMMAND_3             0x3E
+#define PMBUS_FAN_COMMAND_4             0x3F
+
+#define PMBUS_VOUT_OV_FAULT_LIMIT       0x40
+#define PMBUS_VOUT_OV_FAULT_RESPONSE    0x41
+#define PMBUS_VOUT_OV_WARN_LIMIT        0x42
+#define PMBUS_VOUT_UV_WARN_LIMIT        0x43
+#define PMBUS_VOUT_UV_FAULT_LIMIT       0x44
+#define PMBUS_VOUT_UV_FAULT_RESPONSE    0x45
+#define PMBUS_IOUT_OC_FAULT_LIMIT       0x46
+#define PMBUS_IOUT_OC_FAULT_RESPONSE    0x47
+#define PMBUS_IOUT_OC_LV_FAULT_LIMIT    0x48
+#define PMBUS_IOUT_OC_LV_FAULT_RESPONSE 0x49
+#define PMBUS_IOUT_OC_WARN_LIMIT        0x4A
+#define PMBUS_IOUT_UC_FAULT_LIMIT       0x4B
+#define PMBUS_IOUT_UC_FAULT_RESPONSE    0x4C
+
+#define PMBUS_OT_FAULT_LIMIT            0x4F
+#define PMBUS_OT_FAULT_RESPONSE         0x50
+#define PMBUS_OT_WARN_LIMIT             0x51
+#define PMBUS_UT_WARN_LIMIT             0x52
+#define PMBUS_UT_FAULT_LIMIT            0x53
+#define PMBUS_UT_FAULT_RESPONSE         0x54
+#define PMBUS_VIN_OV_FAULT_LIMIT        0x55
+#define PMBUS_VIN_OV_FAULT_RESPONSE     0x56
+#define PMBUS_VIN_OV_WARN_LIMIT         0x57
+#define PMBUS_VIN_UV_WARN_LIMIT         0x58
+#define PMBUS_VIN_UV_FAULT_LIMIT        0x59
+
+#define PMBUS_IIN_OC_FAULT_LIMIT        0x5B
+#define PMBUS_IIN_OC_WARN_LIMIT         0x5D
+
+#define PMBUS_POUT_OP_FAULT_LIMIT       0x68
+#define PMBUS_POUT_OP_WARN_LIMIT        0x6A
+#define PMBUS_PIN_OP_WARN_LIMIT         0x6B
+
+#define PMBUS_STATUS_BYTE               0x78
+#define PMBUS_STATUS_WORD               0x79
+#define PMBUS_STATUS_VOUT               0x7A
+#define PMBUS_STATUS_IOUT               0x7B
+#define PMBUS_STATUS_INPUT              0x7C
+#define PMBUS_STATUS_TEMPERATURE        0x7D
+#define PMBUS_STATUS_CML                0x7E
+#define PMBUS_STATUS_OTHER              0x7F
+#define PMBUS_STATUS_MFR_SPECIFIC       0x80
+#define PMBUS_STATUS_FAN_12             0x81
+#define PMBUS_STATUS_FAN_34             0x82
+
+#define PMBUS_READ_VIN                  0x88
+#define PMBUS_READ_IIN                  0x89
+#define PMBUS_READ_VCAP                 0x8A
+#define PMBUS_READ_VOUT                 0x8B
+#define PMBUS_READ_IOUT                 0x8C
+#define PMBUS_READ_TEMPERATURE_1        0x8D
+#define PMBUS_READ_TEMPERATURE_2        0x8E
+#define PMBUS_READ_TEMPERATURE_3        0x8F
+#define PMBUS_READ_FAN_SPEED_1          0x90
+#define PMBUS_READ_FAN_SPEED_2          0x91
+#define PMBUS_READ_FAN_SPEED_3          0x92
+#define PMBUS_READ_FAN_SPEED_4          0x93
+#define PMBUS_READ_DUTY_CYCLE           0x94
+#define PMBUS_READ_FREQUENCY            0x95
+#define PMBUS_READ_POUT                 0x96
+#define PMBUS_READ_PIN                  0x97
+
+#define PMBUS_REVISION                  0x98
+#define PMBUS_MFR_ID                    0x99
+#define PMBUS_MFR_MODEL                 0x9A
+#define PMBUS_MFR_REVISION              0x9B
+#define PMBUS_MFR_LOCATION              0x9C
+#define PMBUS_MFR_DATE                  0x9D
+#define PMBUS_MFR_SERIAL                0x9E
+
+/*
+ * CAPABILITY
+ */
+#define PB_CAPABILITY_SMBALERT          (1<<4)
+#define PB_CAPABILITY_ERROR_CHECK       (1<<7)
+
+/*
+ * VOUT_MODE
+ */
+#define PB_VOUT_MODE_MODE_MASK          0xe0
+#define PB_VOUT_MODE_PARAM_MASK         0x1f
+
+#define PB_VOUT_MODE_LINEAR             0x00
+#define PB_VOUT_MODE_VID                0x20
+#define PB_VOUT_MODE_DIRECT             0x40
+
+/*
+ * Fan configuration
+ */
+#define PB_FAN_2_PULSE_MASK             ((1 << 0) | (1 << 1))
+#define PB_FAN_2_RPM                    (1 << 2)
+#define PB_FAN_2_INSTALLED              (1 << 3)
+#define PB_FAN_1_PULSE_MASK             ((1 << 4) | (1 << 5))
+#define PB_FAN_1_RPM                    (1 << 6)
+#define PB_FAN_1_INSTALLED              (1 << 7)
+
+/*
+ * STATUS_BYTE, STATUS_WORD (lower)
+ */
+#define PB_STATUS_NONE_ABOVE            (1<<0)
+#define PB_STATUS_CML                   (1<<1)
+#define PB_STATUS_TEMPERATURE           (1<<2)
+#define PB_STATUS_VIN_UV                (1<<3)
+#define PB_STATUS_IOUT_OC               (1<<4)
+#define PB_STATUS_VOUT_OV               (1<<5)
+#define PB_STATUS_OFF                   (1<<6)
+#define PB_STATUS_BUSY                  (1<<7)
+
+/*
+ * STATUS_WORD (upper)
+ */
+#define PB_STATUS_UNKNOWN               (1<<8)
+#define PB_STATUS_OTHER                 (1<<9)
+#define PB_STATUS_FANS                  (1<<10)
+#define PB_STATUS_POWER_GOOD_N          (1<<11)
+#define PB_STATUS_WORD_MFR              (1<<12)
+#define PB_STATUS_INPUT                 (1<<13)
+#define PB_STATUS_IOUT_POUT             (1<<14)
+#define PB_STATUS_VOUT                  (1<<15)
+
+/*
+ * STATUS_IOUT
+ */
+#define PB_POUT_OP_WARNING              (1<<0)
+#define PB_POUT_OP_FAULT                (1<<1)
+#define PB_POWER_LIMITING               (1<<2)
+#define PB_CURRENT_SHARE_FAULT          (1<<3)
+#define PB_IOUT_UC_FAULT                (1<<4)
+#define PB_IOUT_OC_WARNING              (1<<5)
+#define PB_IOUT_OC_LV_FAULT             (1<<6)
+#define PB_IOUT_OC_FAULT                (1<<7)
+
+/*
+ * STATUS_VOUT, STATUS_INPUT
+ */
+#define PB_VOLTAGE_UV_FAULT             (1<<4)
+#define PB_VOLTAGE_UV_WARNING           (1<<5)
+#define PB_VOLTAGE_OV_WARNING           (1<<6)
+#define PB_VOLTAGE_OV_FAULT             (1<<7)
+
+/*
+ * STATUS_INPUT
+ */
+#define PB_PIN_OP_WARNING               (1<<0)
+#define PB_IIN_OC_WARNING               (1<<1)
+#define PB_IIN_OC_FAULT                 (1<<2)
+
+/*
+ * STATUS_TEMPERATURE
+ */
+#define PB_TEMP_UT_FAULT                (1<<4)
+#define PB_TEMP_UT_WARNING              (1<<5)
+#define PB_TEMP_OT_WARNING              (1<<6)
+#define PB_TEMP_OT_FAULT                (1<<7)
+
+/*
+ * STATUS_FAN
+ */
+#define PB_FAN_AIRFLOW_WARNING          (1<<0)
+#define PB_FAN_AIRFLOW_FAULT            (1<<1)
+#define PB_FAN_FAN2_SPEED_OVERRIDE      (1<<2)
+#define PB_FAN_FAN1_SPEED_OVERRIDE      (1<<3)
+#define PB_FAN_FAN2_WARNING             (1<<4)
+#define PB_FAN_FAN1_WARNING             (1<<5)
+#define PB_FAN_FAN2_FAULT               (1<<6)
+#define PB_FAN_FAN1_FAULT               (1<<7)
+
+/*
+ * CML_FAULT_STATUS
+ */
+#define PB_CML_FAULT_OTHER_MEM_LOGIC    (1<<0)
+#define PB_CML_FAULT_OTHER_COMM         (1<<1)
+#define PB_CML_FAULT_PROCESSOR          (1<<3)
+#define PB_CML_FAULT_MEMORY             (1<<4)
+#define PB_CML_FAULT_PACKET_ERROR       (1<<5)
+#define PB_CML_FAULT_INVALID_DATA       (1<<6)
+#define PB_CML_FAULT_INVALID_COMMAND    (1<<7)
+
+enum pmbus_sensor_classes {
+        PSC_VOLTAGE_IN = 0,
+        PSC_VOLTAGE_OUT,
+        PSC_CURRENT_IN,
+        PSC_CURRENT_OUT,
+        PSC_POWER,
+        PSC_TEMPERATURE,
+        PSC_FAN,
+        PSC_NUM_CLASSES         /* Number of power sensor classes */
+};
+
+#define PMBUS_PAGES     32      /* Per PMBus specification */
+
+/* Functionality bit mask */
+#define PMBUS_HAVE_VIN          (1 << 0)
+#define PMBUS_HAVE_VCAP         (1 << 1)
+#define PMBUS_HAVE_VOUT         (1 << 2)
+#define PMBUS_HAVE_IIN          (1 << 3)
+#define PMBUS_HAVE_IOUT         (1 << 4)
+#define PMBUS_HAVE_PIN          (1 << 5)
+#define PMBUS_HAVE_POUT         (1 << 6)
+#define PMBUS_HAVE_FAN12        (1 << 7)
+#define PMBUS_HAVE_FAN34        (1 << 8)
+#define PMBUS_HAVE_TEMP         (1 << 9)
+#define PMBUS_HAVE_TEMP2        (1 << 10)
+#define PMBUS_HAVE_TEMP3        (1 << 11)
+#define PMBUS_HAVE_STATUS_VOUT  (1 << 12)
+#define PMBUS_HAVE_STATUS_IOUT  (1 << 13)
+#define PMBUS_HAVE_STATUS_INPUT (1 << 14)
+#define PMBUS_HAVE_STATUS_TEMP  (1 << 15)
+#define PMBUS_HAVE_STATUS_FAN12 (1 << 16)
+#define PMBUS_HAVE_STATUS_FAN34 (1 << 17)
+
+struct pmbus_driver_info {
+        int pages;              /* Total number of pages */
+        bool direct[PSC_NUM_CLASSES];
+                                /* true if device uses direct data format
+                                   for the given sensor class */
+        /*
+         * Support one set of coefficients for each sensor type
+         * Used for chips providing data in direct mode.
+         */
+        int m[PSC_NUM_CLASSES]; /* mantissa for direct data format */
+        int b[PSC_NUM_CLASSES]; /* offset */
+        int R[PSC_NUM_CLASSES]; /* exponent */
+
+        u32 func[PMBUS_PAGES];  /* Functionality, per page */
+        /*
+         * The get_status function maps manufacturing specific status values
+         * into PMBus standard status values.
+         * This function is optional and only necessary if chip specific status
+         * register values have to be mapped into standard PMBus status register
+         * values.
+         */
+        int (*get_status)(struct i2c_client *client, int page, int reg);
+        /*
+         * The identify function determines supported PMBus functionality.
+         * This function is only necessary if a chip driver supports multiple
+         * chips, and the chip functionality is not pre-determined.
+         */
+        int (*identify)(struct i2c_client *client,
+                        struct pmbus_driver_info *info);
+};
+
+/* Function declarations */
+
+int pmbus_set_page(struct i2c_client *client, u8 page);
+int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg);
+void pmbus_clear_faults(struct i2c_client *client);
+bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg);
+bool pmbus_check_word_register(struct i2c_client *client, int page, int reg);
+int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id,
+                   struct pmbus_driver_info *info);
+int pmbus_do_remove(struct i2c_client *client);
+const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client
+                                                      *client);
+
+#endif /* PMBUS_H */