1 files changed, 18 insertions, 37 deletions

diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
index 8acf82977e7b..480f80ea1fa0 100644
--- a/drivers/hwmon/asb100.c
+++ b/drivers/hwmon/asb100.c
@@ -701,6 +701,7 @@ static int asb100_detect(struct i2c_client *client, int kind,
                          struct i2c_board_info *info)
 {
         struct i2c_adapter *adapter = client->adapter;
+        int val1, val2;
 
         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
                 pr_debug("asb100.o: detect failed, "
@@ -708,50 +709,30 @@ static int asb100_detect(struct i2c_client *client, int kind,
                 return -ENODEV;
         }
 
-        /* The chip may be stuck in some other bank than bank 0. This may
-           make reading other information impossible. Specify a force=... or
-           force_*=... parameter, and the chip will be reset to the right
-           bank. */
-        if (kind < 0) {
-
-                int val1 = i2c_smbus_read_byte_data(client, ASB100_REG_BANK);
-                int val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN);
-
-                /* If we're in bank 0 */
-                if ((!(val1 & 0x07)) &&
-                                /* Check for ASB100 ID (low byte) */
-                                (((!(val1 & 0x80)) && (val2 != 0x94)) ||
-                                /* Check for ASB100 ID (high byte ) */
-                                ((val1 & 0x80) && (val2 != 0x06)))) {
-                        pr_debug("asb100.o: detect failed, "
-                                        "bad chip id 0x%02x!\n", val2);
-                        return -ENODEV;
-                }
+        val1 = i2c_smbus_read_byte_data(client, ASB100_REG_BANK);
+        val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN);
 
-        } /* kind < 0 */
+        /* If we're in bank 0 */
+        if ((!(val1 & 0x07)) &&
+                        /* Check for ASB100 ID (low byte) */
+                        (((!(val1 & 0x80)) && (val2 != 0x94)) ||
+                        /* Check for ASB100 ID (high byte ) */
+                        ((val1 & 0x80) && (val2 != 0x06)))) {
+                pr_debug("asb100: detect failed, bad chip id 0x%02x!\n", val2);
+                return -ENODEV;
+        }
 
-        /* We have either had a force parameter, or we have already detected
-           Winbond. Put it now into bank 0 and Vendor ID High Byte */
+        /* Put it now into bank 0 and Vendor ID High Byte */
         i2c_smbus_write_byte_data(client, ASB100_REG_BANK,
                 (i2c_smbus_read_byte_data(client, ASB100_REG_BANK) & 0x78)
                 | 0x80);
 
         /* Determine the chip type. */
-        if (kind <= 0) {
-                int val1 = i2c_smbus_read_byte_data(client, ASB100_REG_WCHIPID);
-                int val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN);
-
-                if ((val1 == 0x31) && (val2 == 0x06))
-                        kind = asb100;
-                else {
-                        if (kind == 0)
-                                dev_warn(&adapter->dev, "ignoring "
-                                        "'force' parameter for unknown chip "
-                                        "at adapter %d, address 0x%02x.\n",
-                                        i2c_adapter_id(adapter), client->addr);
-                        return -ENODEV;
-                }
-        }
+        val1 = i2c_smbus_read_byte_data(client, ASB100_REG_WCHIPID);
+        val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN);
+
+        if (val1 != 0x31 || val2 != 0x06)
+                return -ENODEV;
 
         strlcpy(info->type, "asb100", I2C_NAME_SIZE);