7 files changed, 41 insertions, 34 deletions

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 43b35d0369d6..43d6ba83a191 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -124,7 +124,7 @@ config COMPUTONE
           which give you many serial ports. You would need something like this
           to connect more than two modems to your Linux box, for instance in
           order to become a dial-in server. If you have a card like that, say
-          Y here and read <file:Documentation/computone.txt>.
+          Y here and read <file:Documentation/serial/computone.txt>.
 
           To compile this driver as module, choose M here: the
           module will be called ip2.
@@ -136,7 +136,7 @@ config ROCKETPORT
           This driver supports Comtrol RocketPort and RocketModem PCI boards.   
           These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or
           modems.  For information about the RocketPort/RocketModem  boards
-          and this driver read <file:Documentation/rocket.txt>.
+          and this driver read <file:Documentation/serial/rocket.txt>.
 
           To compile this driver as a module, choose M here: the
           module will be called rocket.
@@ -154,7 +154,7 @@ config CYCLADES
           your Linux box, for instance in order to become a dial-in server.
 
           For information about the Cyclades-Z card, read
-          <file:Documentation/README.cycladesZ>.
+          <file:Documentation/serial/README.cycladesZ>.
 
           To compile this driver as a module, choose M here: the
           module will be called cyclades.
@@ -183,7 +183,7 @@ config DIGIEPCA
           box, for instance in order to become a dial-in server. This driver
           supports the original PC (ISA) boards as well as PCI, and EISA. If
           you have a card like this, say Y here and read the file
-          <file:Documentation/digiepca.txt>.
+          <file:Documentation/serial/digiepca.txt>.
 
           To compile this driver as a module, choose M here: the
           module will be called epca.
@@ -289,7 +289,7 @@ config RISCOM8
           which gives you many serial ports. You would need something like
           this to connect more than two modems to your Linux box, for instance
           in order to become a dial-in server. If you have a card like that,
-          say Y here and read the file <file:Documentation/riscom8.txt>.
+          say Y here and read the file <file:Documentation/serial/riscom8.txt>.
 
           Also it's possible to say M here and compile this driver as kernel
           loadable module; the module will be called riscom8.
@@ -304,8 +304,8 @@ config SPECIALIX
           your Linux box, for instance in order to become a dial-in server.
 
           If you have a card like that, say Y here and read the file
-          <file:Documentation/specialix.txt>. Also it's possible to say M here
-          and compile this driver as kernel loadable module which will be
+          <file:Documentation/serial/specialix.txt>. Also it's possible to say
+          M here and compile this driver as kernel loadable module which will be
           called specialix.
 
 config SX
@@ -313,7 +313,7 @@ config SX
         depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
         help
           This is a driver for the SX and SI multiport serial cards.
-          Please read the file <file:Documentation/sx.txt> for details.
+          Please read the file <file:Documentation/serial/sx.txt> for details.
 
           This driver can only be built as a module ( = code which can be
           inserted in and removed from the running kernel whenever you want).
@@ -344,8 +344,8 @@ config STALDRV
           like this to connect more than two modems to your Linux box, for
           instance in order to become a dial-in server.  If you say Y here,
           you will be asked for your specific card model in the next
-          questions.  Make sure to read <file:Documentation/stallion.txt> in
-          this case.  If you have never heard about all this, it's safe to
+          questions.  Make sure to read <file:Documentation/serial/stallion.txt>
+          in this case.  If you have never heard about all this, it's safe to
           say N.
 
 config STALLION
@@ -354,7 +354,7 @@ config STALLION
         help
           If you have an EasyIO or EasyConnection 8/32 multiport Stallion
           card, then this is for you; say Y.  Make sure to read
-          <file:Documentation/stallion.txt>.
+          <file:Documentation/serial/stallion.txt>.
 
           To compile this driver as a module, choose M here: the
           module will be called stallion.
@@ -365,7 +365,7 @@ config ISTALLION
         help
           If you have an EasyConnection 8/64, ONboard, Brumby or Stallion
           serial multiport card, say Y here. Make sure to read
-          <file:Documentation/stallion.txt>.
+          <file:Documentation/serial/stallion.txt>.
 
           To compile this driver as a module, choose M here: the
           module will be called istallion.
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index 8a59aaa21be5..7a88dfd4427b 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -422,9 +422,11 @@ struct ipmi_smi {
 /**
  * The driver model view of the IPMI messaging driver.
  */
-static struct device_driver ipmidriver = {
-        .name = "ipmi",
-        .bus = &platform_bus_type
+static struct platform_driver ipmidriver = {
+        .driver = {
+                .name = "ipmi",
+                .bus = &platform_bus_type
+        }
 };
 static DEFINE_MUTEX(ipmidriver_mutex);
 
@@ -2384,9 +2386,9 @@ static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum,
          * representing the interfaced BMC already
          */
         if (bmc->guid_set)
-                old_bmc = ipmi_find_bmc_guid(&ipmidriver, bmc->guid);
+                old_bmc = ipmi_find_bmc_guid(&ipmidriver.driver, bmc->guid);
         else
-                old_bmc = ipmi_find_bmc_prod_dev_id(&ipmidriver,
+                old_bmc = ipmi_find_bmc_prod_dev_id(&ipmidriver.driver,
                                                     bmc->id.product_id,
                                                     bmc->id.device_id);
 
@@ -2416,7 +2418,7 @@ static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum,
                 snprintf(name, sizeof(name),
                          "ipmi_bmc.%4.4x", bmc->id.product_id);
 
-                while (ipmi_find_bmc_prod_dev_id(&ipmidriver,
+                while (ipmi_find_bmc_prod_dev_id(&ipmidriver.driver,
                                                  bmc->id.product_id,
                                                  bmc->id.device_id)) {
                         if (!warn_printed) {
@@ -2446,7 +2448,7 @@ static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum,
                                " Unable to allocate platform device\n");
                         return -ENOMEM;
                 }
-                bmc->dev->dev.driver = &ipmidriver;
+                bmc->dev->dev.driver = &ipmidriver.driver;
                 dev_set_drvdata(&bmc->dev->dev, bmc);
                 kref_init(&bmc->refcount);
 
@@ -4247,7 +4249,7 @@ static int ipmi_init_msghandler(void)
         if (initialized)
                 return 0;
 
-        rv = driver_register(&ipmidriver);
+        rv = driver_register(&ipmidriver.driver);
         if (rv) {
                 printk(KERN_ERR PFX "Could not register IPMI driver\n");
                 return rv;
@@ -4308,7 +4310,7 @@ static __exit void cleanup_ipmi(void)
         remove_proc_entry(proc_ipmi_root->name, NULL);
 #endif /* CONFIG_PROC_FS */
 
-        driver_unregister(&ipmidriver);
+        driver_unregister(&ipmidriver.driver);
 
         initialized = 0;
 
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 3123bf57ad91..3000135f2ead 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -114,9 +114,11 @@ static char *si_to_str[] = { "kcs", "smic", "bt" };
 
 #define DEVICE_NAME "ipmi_si"
 
-static struct device_driver ipmi_driver = {
-        .name = DEVICE_NAME,
-        .bus = &platform_bus_type
+static struct platform_driver ipmi_driver = {
+        .driver = {
+                .name = DEVICE_NAME,
+                .bus = &platform_bus_type
+        }
 };
 
 
@@ -2868,7 +2870,7 @@ static int try_smi_init(struct smi_info *new_smi)
                         goto out_err;
                 }
                 new_smi->dev = &new_smi->pdev->dev;
-                new_smi->dev->driver = &ipmi_driver;
+                new_smi->dev->driver = &ipmi_driver.driver;
 
                 rv = platform_device_add(new_smi->pdev);
                 if (rv) {
@@ -2983,7 +2985,7 @@ static __devinit int init_ipmi_si(void)
         initialized = 1;
 
         /* Register the device drivers. */
-        rv = driver_register(&ipmi_driver);
+        rv = driver_register(&ipmi_driver.driver);
         if (rv) {
                 printk(KERN_ERR
                        "init_ipmi_si: Unable to register driver: %d\n",
@@ -3052,7 +3054,7 @@ static __devinit int init_ipmi_si(void)
 #ifdef CONFIG_PPC_OF
                 of_unregister_platform_driver(&ipmi_of_platform_driver);
 #endif
-                driver_unregister(&ipmi_driver);
+                driver_unregister(&ipmi_driver.driver);
                 printk(KERN_WARNING
                        "ipmi_si: Unable to find any System Interface(s)\n");
                 return -ENODEV;
@@ -3151,7 +3153,7 @@ static __exit void cleanup_ipmi_si(void)
                 cleanup_one_si(e);
         mutex_unlock(&smi_infos_lock);
 
-        driver_unregister(&ipmi_driver);
+        driver_unregister(&ipmi_driver.driver);
 }
 module_exit(cleanup_ipmi_si);
 
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index 7d30ee1d3fca..04e4549299ba 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -7,12 +7,14 @@
  *      Original driver code supplied by Multi-Tech
  *
  *      Changes
- *      1/9/98  alan@redhat.com         Merge to 2.0.x kernel tree
+ *      1/9/98  alan@lxorguk.ukuu.org.uk
+ *                                      Merge to 2.0.x kernel tree
  *                                      Obtain and use official major/minors
  *                                      Loader switched to a misc device
  *                                      (fixed range check bug as a side effect)
  *                                      Printk clean up
- *      9/12/98 alan@redhat.com         Rough port to 2.1.x
+ *      9/12/98 alan@lxorguk.ukuu.org.uk
+ *                                      Rough port to 2.1.x
  *
  *      10/6/99 sameer                  Merged the ISA and PCI drivers to
  *                                      a new unified driver.
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 8beef50f95a0..047766915411 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -14,7 +14,8 @@
  *      (at your option) any later version.
  *
  *      Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox
- *      <alan@redhat.com>. The original 1.8 code is available on www.moxa.com.
+ *      <alan@lxorguk.ukuu.org.uk>. The original 1.8 code is available on
+ *      www.moxa.com.
  *      - Fixed x86_64 cleanness
  */
 
diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c
index 2457b07dabd6..f4374437a033 100644
--- a/drivers/char/sonypi.c
+++ b/drivers/char/sonypi.c
@@ -523,7 +523,7 @@ static int acpi_driver_registered;
 
 static int sonypi_ec_write(u8 addr, u8 value)
 {
-#ifdef CONFIG_ACPI_EC
+#ifdef CONFIG_ACPI
         if (SONYPI_ACPI_ACTIVE)
                 return ec_write(addr, value);
 #endif
@@ -539,7 +539,7 @@ static int sonypi_ec_write(u8 addr, u8 value)
 
 static int sonypi_ec_read(u8 addr, u8 *value)
 {
-#ifdef CONFIG_ACPI_EC
+#ifdef CONFIG_ACPI
         if (SONYPI_ACPI_ACTIVE)
                 return ec_read(addr, value);
 #endif
diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
index 242fd46fda22..a16b94f12eb2 100644
--- a/drivers/char/specialix.c
+++ b/drivers/char/specialix.c
@@ -72,7 +72,7 @@
 /*
  * There is a bunch of documentation about the card, jumpers, config
  * settings, restrictions, cables, device names and numbers in
- * Documentation/specialix.txt
+ * Documentation/serial/specialix.txt
  */
 
 #include <linux/module.h>