1 files changed, 0 insertions, 231 deletions
diff --git a/drivers/acpi/acpica/acconfig.h b/drivers/acpi/acpica/acconfig.h
deleted file mode 100644
index 1f30af613e87..000000000000
--- a/drivers/acpi/acpica/acconfig.h
+++ /dev/null
@@ -1,231 +0,0 @@
-/******************************************************************************
- *
- * Name: acconfig.h - Global configuration constants
- *
- *****************************************************************************/
-/*
- * Copyright (C) 2000 - 2012, Intel Corp.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- *    substantially similar to the "NO WARRANTY" disclaimer below
- *    ("Disclaimer") and any redistribution must be conditioned upon
- *    including a substantially similar Disclaimer requirement for further
- *    binary redistribution.
- * 3. Neither the names of the above-listed copyright holders nor the names
- *    of any contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * NO WARRANTY
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGES.
- */
-#ifndef _ACCONFIG_H
-#define _ACCONFIG_H
-/******************************************************************************
- *
- * Configuration options
- *
- *****************************************************************************/
-/*
- * ACPI_DEBUG_OUTPUT    - This switch enables all the debug facilities of the
- *                        ACPI subsystem.  This includes the DEBUG_PRINT output
- *                        statements.  When disabled, all DEBUG_PRINT
- *                        statements are compiled out.
- *
- * ACPI_APPLICATION     - Use this switch if the subsystem is going to be run
- *                        at the application level.
- *
- */
-/*
- * OS name, used for the _OS object.  The _OS object is essentially obsolete,
- * but there is a large base of ASL/AML code in existing machines that check
- * for the string below.  The use of this string usually guarantees that
- * the ASL will execute down the most tested code path.  Also, there is some
- * code that will not execute the _OSI method unless _OS matches the string
- * below.  Therefore, change this string at your own risk.
- */
-#define ACPI_OS_NAME                    "Microsoft Windows NT"
-/* Maximum objects in the various object caches */
-#define ACPI_MAX_STATE_CACHE_DEPTH      96      /* State objects */
-#define ACPI_MAX_PARSE_CACHE_DEPTH      96      /* Parse tree objects */
-#define ACPI_MAX_EXTPARSE_CACHE_DEPTH   96      /* Parse tree objects */
-#define ACPI_MAX_OBJECT_CACHE_DEPTH     96      /* Interpreter operand objects */
-#define ACPI_MAX_NAMESPACE_CACHE_DEPTH  96      /* Namespace objects */
-/*
- * Should the subsystem abort the loading of an ACPI table if the
- * table checksum is incorrect?
- */
-#define ACPI_CHECKSUM_ABORT             FALSE
-/******************************************************************************
- *
- * Subsystem Constants
- *
- *****************************************************************************/
-/* Version of ACPI supported */
-#define ACPI_CA_SUPPORT_LEVEL           3
-/* Maximum count for a semaphore object */
-#define ACPI_MAX_SEMAPHORE_COUNT        256
-/* Maximum object reference count (detects object deletion issues) */
-#define ACPI_MAX_REFERENCE_COUNT        0x1000
-/* Default page size for use in mapping memory for operation regions */
-#define ACPI_DEFAULT_PAGE_SIZE          4096    /* Must be power of 2 */
-/* owner_id tracking. 8 entries allows for 255 owner_ids */
-#define ACPI_NUM_OWNERID_MASKS          8
-/* Size of the root table array is increased by this increment */
-#define ACPI_ROOT_TABLE_SIZE_INCREMENT  4
-/* Maximum number of While() loop iterations before forced abort */
-#define ACPI_MAX_LOOP_ITERATIONS        0xFFFF
-/* Maximum sleep allowed via Sleep() operator */
-#define ACPI_MAX_SLEEP                  2000    /* Two seconds */
-/* Address Range lists are per-space_id (Memory and I/O only) */
-#define ACPI_ADDRESS_RANGE_MAX          2
-/******************************************************************************
- *
- * ACPI Specification constants (Do not change unless the specification changes)
- *
- *****************************************************************************/
-/* Number of distinct GPE register blocks and register width */
-#define ACPI_MAX_GPE_BLOCKS             2
-#define ACPI_GPE_REGISTER_WIDTH         8
-/* Method info (in WALK_STATE), containing local variables and argumetns */
-#define ACPI_METHOD_NUM_LOCALS          8
-#define ACPI_METHOD_MAX_LOCAL           7
-#define ACPI_METHOD_NUM_ARGS            7
-#define ACPI_METHOD_MAX_ARG             6
-/* Length of _HID, _UID, _CID, and UUID values */
-#define ACPI_DEVICE_ID_LENGTH           0x09
-#define ACPI_MAX_CID_LENGTH             48
-#define ACPI_UUID_LENGTH                16
-/*
- * Operand Stack (in WALK_STATE), Must be large enough to contain METHOD_MAX_ARG
- */
-#define ACPI_OBJ_NUM_OPERANDS           8
-#define ACPI_OBJ_MAX_OPERAND            7
-/* Number of elements in the Result Stack frame, can be an arbitrary value */
-#define ACPI_RESULTS_FRAME_OBJ_NUM      8
-/*
- * Maximal number of elements the Result Stack can contain,
- * it may be an arbitray value not exceeding the types of
- * result_size and result_count (now u8).
- */
-#define ACPI_RESULTS_OBJ_NUM_MAX        255
-/* Names within the namespace are 4 bytes long */
-#define ACPI_NAME_SIZE                  4
-#define ACPI_PATH_SEGMENT_LENGTH        5       /* 4 chars for name + 1 char for separator */
-#define ACPI_PATH_SEPARATOR             '.'
-/* Sizes for ACPI table headers */
-#define ACPI_OEM_ID_SIZE                6
-#define ACPI_OEM_TABLE_ID_SIZE          8
-/* Constants used in searching for the RSDP in low memory */
-#define ACPI_EBDA_PTR_LOCATION          0x0000040E      /* Physical Address */
-#define ACPI_EBDA_PTR_LENGTH            2
-#define ACPI_EBDA_WINDOW_SIZE           1024
-#define ACPI_HI_RSDP_WINDOW_BASE        0x000E0000      /* Physical Address */
-#define ACPI_HI_RSDP_WINDOW_SIZE        0x00020000
-#define ACPI_RSDP_SCAN_STEP             16
-/* Operation regions */
-#define ACPI_USER_REGION_BEGIN          0x80
-/* Maximum space_ids for Operation Regions */
-#define ACPI_MAX_ADDRESS_SPACE          255
-/* Array sizes.  Used for range checking also */
-#define ACPI_MAX_MATCH_OPCODE           5
-/* RSDP checksums */
-#define ACPI_RSDP_CHECKSUM_LENGTH       20
-#define ACPI_RSDP_XCHECKSUM_LENGTH      36
-/* SMBus, GSBus and IPMI bidirectional buffer size */
-#define ACPI_SMBUS_BUFFER_SIZE          34
-#define ACPI_GSBUS_BUFFER_SIZE          34
-#define ACPI_IPMI_BUFFER_SIZE           66
-/* _sx_d and _sx_w control methods */
-#define ACPI_NUM_sx_d_METHODS           4
-#define ACPI_NUM_sx_w_METHODS           5
-/******************************************************************************
- *
- * ACPI AML Debugger
- *
- *****************************************************************************/
-#define ACPI_DEBUGGER_MAX_ARGS          8       /* Must be max method args + 1 */
-#define ACPI_DEBUGGER_COMMAND_PROMPT    '-'
-#define ACPI_DEBUGGER_EXECUTE_PROMPT    '%'
-#endif                          /* _ACCONFIG_H */

diff --git a/drivers/acpi/acpica/acconfig.h b/drivers/acpi/acpica/acconfig.h deleted file mode 100644 index 1f30af613e87..000000000000 --- a/drivers/acpi/acpica/acconfig.h +++ /dev/null
@@ -1,231 +0,0 @@
1	/******************************************************************************
2	*
3	* Name: acconfig.h - Global configuration constants
4	*
5	*****************************************************************************/
6
7	/*
8	* Copyright (C) 2000 - 2012, Intel Corp.
9	* All rights reserved.
10	*
11	* Redistribution and use in source and binary forms, with or without
12	* modification, are permitted provided that the following conditions
13	* are met:
14	* 1. Redistributions of source code must retain the above copyright
15	* notice, this list of conditions, and the following disclaimer,
16	* without modification.
17	* 2. Redistributions in binary form must reproduce at minimum a disclaimer
18	* substantially similar to the "NO WARRANTY" disclaimer below
19	* ("Disclaimer") and any redistribution must be conditioned upon
20	* including a substantially similar Disclaimer requirement for further
21	* binary redistribution.
22	* 3. Neither the names of the above-listed copyright holders nor the names
23	* of any contributors may be used to endorse or promote products derived
24	* from this software without specific prior written permission.
25	*
26	* Alternatively, this software may be distributed under the terms of the
27	* GNU General Public License ("GPL") version 2 as published by the Free
28	* Software Foundation.
29	*
30	* NO WARRANTY
31	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32	* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33	* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34	* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35	* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36	* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37	* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38	* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39	* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40	* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41	* POSSIBILITY OF SUCH DAMAGES.
42	*/
43
44	#ifndef _ACCONFIG_H
45	#define _ACCONFIG_H
46
47	/******************************************************************************
48	*
49	* Configuration options
50	*
51	*****************************************************************************/
52
53	/*
54	* ACPI_DEBUG_OUTPUT - This switch enables all the debug facilities of the
55	* ACPI subsystem. This includes the DEBUG_PRINT output
56	* statements. When disabled, all DEBUG_PRINT
57	* statements are compiled out.
58	*
59	* ACPI_APPLICATION - Use this switch if the subsystem is going to be run
60	* at the application level.
61	*
62	*/
63
64	/*
65	* OS name, used for the _OS object. The _OS object is essentially obsolete,
66	* but there is a large base of ASL/AML code in existing machines that check
67	* for the string below. The use of this string usually guarantees that
68	* the ASL will execute down the most tested code path. Also, there is some
69	* code that will not execute the _OSI method unless _OS matches the string
70	* below. Therefore, change this string at your own risk.
71	*/
72	#define ACPI_OS_NAME "Microsoft Windows NT"
73
74	/* Maximum objects in the various object caches */
75
76	#define ACPI_MAX_STATE_CACHE_DEPTH 96 /* State objects */
77	#define ACPI_MAX_PARSE_CACHE_DEPTH 96 /* Parse tree objects */
78	#define ACPI_MAX_EXTPARSE_CACHE_DEPTH 96 /* Parse tree objects */
79	#define ACPI_MAX_OBJECT_CACHE_DEPTH 96 /* Interpreter operand objects */
80	#define ACPI_MAX_NAMESPACE_CACHE_DEPTH 96 /* Namespace objects */
81
82	/*
83	* Should the subsystem abort the loading of an ACPI table if the
84	* table checksum is incorrect?
85	*/
86	#define ACPI_CHECKSUM_ABORT FALSE
87
88	/******************************************************************************
89	*
90	* Subsystem Constants
91	*
92	*****************************************************************************/
93
94	/* Version of ACPI supported */
95
96	#define ACPI_CA_SUPPORT_LEVEL 3
97
98	/* Maximum count for a semaphore object */
99
100	#define ACPI_MAX_SEMAPHORE_COUNT 256
101
102	/* Maximum object reference count (detects object deletion issues) */
103
104	#define ACPI_MAX_REFERENCE_COUNT 0x1000
105
106	/* Default page size for use in mapping memory for operation regions */
107
108	#define ACPI_DEFAULT_PAGE_SIZE 4096 /* Must be power of 2 */
109
110	/* owner_id tracking. 8 entries allows for 255 owner_ids */
111
112	#define ACPI_NUM_OWNERID_MASKS 8
113
114	/* Size of the root table array is increased by this increment */
115
116	#define ACPI_ROOT_TABLE_SIZE_INCREMENT 4
117
118	/* Maximum number of While() loop iterations before forced abort */
119
120	#define ACPI_MAX_LOOP_ITERATIONS 0xFFFF
121
122	/* Maximum sleep allowed via Sleep() operator */
123
124	#define ACPI_MAX_SLEEP 2000 /* Two seconds */
125
126	/* Address Range lists are per-space_id (Memory and I/O only) */
127
128	#define ACPI_ADDRESS_RANGE_MAX 2
129
130	/******************************************************************************
131	*
132	* ACPI Specification constants (Do not change unless the specification changes)
133	*
134	*****************************************************************************/
135
136	/* Number of distinct GPE register blocks and register width */
137
138	#define ACPI_MAX_GPE_BLOCKS 2
139	#define ACPI_GPE_REGISTER_WIDTH 8
140
141	/* Method info (in WALK_STATE), containing local variables and argumetns */
142
143	#define ACPI_METHOD_NUM_LOCALS 8
144	#define ACPI_METHOD_MAX_LOCAL 7
145
146	#define ACPI_METHOD_NUM_ARGS 7
147	#define ACPI_METHOD_MAX_ARG 6
148
149	/* Length of _HID, _UID, _CID, and UUID values */
150
151	#define ACPI_DEVICE_ID_LENGTH 0x09
152	#define ACPI_MAX_CID_LENGTH 48
153	#define ACPI_UUID_LENGTH 16
154
155	/*
156	* Operand Stack (in WALK_STATE), Must be large enough to contain METHOD_MAX_ARG
157	*/
158	#define ACPI_OBJ_NUM_OPERANDS 8
159	#define ACPI_OBJ_MAX_OPERAND 7
160
161	/* Number of elements in the Result Stack frame, can be an arbitrary value */
162
163	#define ACPI_RESULTS_FRAME_OBJ_NUM 8
164
165	/*
166	* Maximal number of elements the Result Stack can contain,
167	* it may be an arbitray value not exceeding the types of
168	* result_size and result_count (now u8).
169	*/
170	#define ACPI_RESULTS_OBJ_NUM_MAX 255
171
172	/* Names within the namespace are 4 bytes long */
173
174	#define ACPI_NAME_SIZE 4
175	#define ACPI_PATH_SEGMENT_LENGTH 5 /* 4 chars for name + 1 char for separator */
176	#define ACPI_PATH_SEPARATOR '.'
177
178	/* Sizes for ACPI table headers */
179
180	#define ACPI_OEM_ID_SIZE 6
181	#define ACPI_OEM_TABLE_ID_SIZE 8
182
183	/* Constants used in searching for the RSDP in low memory */
184
185	#define ACPI_EBDA_PTR_LOCATION 0x0000040E /* Physical Address */
186	#define ACPI_EBDA_PTR_LENGTH 2
187	#define ACPI_EBDA_WINDOW_SIZE 1024
188	#define ACPI_HI_RSDP_WINDOW_BASE 0x000E0000 /* Physical Address */
189	#define ACPI_HI_RSDP_WINDOW_SIZE 0x00020000
190	#define ACPI_RSDP_SCAN_STEP 16
191
192	/* Operation regions */
193
194	#define ACPI_USER_REGION_BEGIN 0x80
195
196	/* Maximum space_ids for Operation Regions */
197
198	#define ACPI_MAX_ADDRESS_SPACE 255
199
200	/* Array sizes. Used for range checking also */
201
202	#define ACPI_MAX_MATCH_OPCODE 5
203
204	/* RSDP checksums */
205
206	#define ACPI_RSDP_CHECKSUM_LENGTH 20
207	#define ACPI_RSDP_XCHECKSUM_LENGTH 36
208
209	/* SMBus, GSBus and IPMI bidirectional buffer size */
210
211	#define ACPI_SMBUS_BUFFER_SIZE 34
212	#define ACPI_GSBUS_BUFFER_SIZE 34
213	#define ACPI_IPMI_BUFFER_SIZE 66
214
215	/* _sx_d and _sx_w control methods */
216
217	#define ACPI_NUM_sx_d_METHODS 4
218	#define ACPI_NUM_sx_w_METHODS 5
219
220	/******************************************************************************
221	*
222	* ACPI AML Debugger
223	*
224	*****************************************************************************/
225
226	#define ACPI_DEBUGGER_MAX_ARGS 8 /* Must be max method args + 1 */
227
228	#define ACPI_DEBUGGER_COMMAND_PROMPT '-'
229	#define ACPI_DEBUGGER_EXECUTE_PROMPT '%'
230
231	#endif /* _ACCONFIG_H */