diff options
Diffstat (limited to 'arch')
100 files changed, 1114 insertions, 3388 deletions
diff --git a/arch/mips/au1000/common/Makefile b/arch/mips/au1000/common/Makefile index a1edfd1f643c..bf682f50b859 100644 --- a/arch/mips/au1000/common/Makefile +++ b/arch/mips/au1000/common/Makefile | |||
@@ -6,7 +6,7 @@ | |||
6 | # Makefile for the Alchemy Au1000 CPU, generic files. | 6 | # Makefile for the Alchemy Au1000 CPU, generic files. |
7 | # | 7 | # |
8 | 8 | ||
9 | obj-y += prom.o int-handler.o irq.o puts.o time.o reset.o \ | 9 | obj-y += prom.o irq.o puts.o time.o reset.o \ |
10 | au1xxx_irqmap.o clocks.o platform.o power.o setup.o \ | 10 | au1xxx_irqmap.o clocks.o platform.o power.o setup.o \ |
11 | sleeper.o cputable.o dma.o dbdma.o gpio.o | 11 | sleeper.o cputable.o dma.o dbdma.o gpio.o |
12 | 12 | ||
diff --git a/arch/mips/au1000/common/int-handler.S b/arch/mips/au1000/common/int-handler.S deleted file mode 100644 index 65baa8a8c522..000000000000 --- a/arch/mips/au1000/common/int-handler.S +++ /dev/null | |||
@@ -1,69 +0,0 @@ | |||
1 | /* | ||
2 | * Copyright 2001 MontaVista Software Inc. | ||
3 | * Author: ppopov@mvista.com | ||
4 | * | ||
5 | * Interrupt dispatcher for Au1000 boards. | ||
6 | * | ||
7 | * This program is free software; you can redistribute it and/or modify it | ||
8 | * under the terms of the GNU General Public License as published by the | ||
9 | * Free Software Foundation; either version 2 of the License, or (at your | ||
10 | * option) any later version. | ||
11 | */ | ||
12 | #include <asm/asm.h> | ||
13 | #include <asm/mipsregs.h> | ||
14 | #include <asm/addrspace.h> | ||
15 | #include <asm/regdef.h> | ||
16 | #include <asm/stackframe.h> | ||
17 | |||
18 | .text | ||
19 | .set macro | ||
20 | .set noat | ||
21 | .align 5 | ||
22 | |||
23 | NESTED(au1000_IRQ, PT_SIZE, sp) | ||
24 | SAVE_ALL | ||
25 | CLI # Important: mark KERNEL mode ! | ||
26 | |||
27 | mfc0 t0,CP0_CAUSE # get pending interrupts | ||
28 | mfc0 t1,CP0_STATUS # get enabled interrupts | ||
29 | and t0,t1 # isolate allowed ones | ||
30 | |||
31 | andi t0,0xff00 # isolate pending bits | ||
32 | beqz t0, 3f # spurious interrupt | ||
33 | |||
34 | andi a0, t0, CAUSEF_IP7 | ||
35 | beq a0, zero, 1f | ||
36 | move a0, sp | ||
37 | jal mips_timer_interrupt | ||
38 | j ret_from_irq | ||
39 | |||
40 | 1: | ||
41 | andi a0, t0, CAUSEF_IP2 # Interrupt Controller 0, Request 0 | ||
42 | beq a0, zero, 2f | ||
43 | move a0,sp | ||
44 | jal intc0_req0_irqdispatch | ||
45 | j ret_from_irq | ||
46 | 2: | ||
47 | andi a0, t0, CAUSEF_IP3 # Interrupt Controller 0, Request 1 | ||
48 | beq a0, zero, 3f | ||
49 | move a0,sp | ||
50 | jal intc0_req1_irqdispatch | ||
51 | j ret_from_irq | ||
52 | 3: | ||
53 | andi a0, t0, CAUSEF_IP4 # Interrupt Controller 1, Request 0 | ||
54 | beq a0, zero, 4f | ||
55 | move a0,sp | ||
56 | jal intc1_req0_irqdispatch | ||
57 | j ret_from_irq | ||
58 | 4: | ||
59 | andi a0, t0, CAUSEF_IP5 # Interrupt Controller 1, Request 1 | ||
60 | beq a0, zero, 5f | ||
61 | move a0, sp | ||
62 | jal intc1_req1_irqdispatch | ||
63 | j ret_from_irq | ||
64 | |||
65 | 5: | ||
66 | move a0, sp | ||
67 | jal spurious_interrupt | ||
68 | j ret_from_irq | ||
69 | END(au1000_IRQ) | ||
diff --git a/arch/mips/au1000/common/irq.c b/arch/mips/au1000/common/irq.c index 1339a0979f66..da61de776154 100644 --- a/arch/mips/au1000/common/irq.c +++ b/arch/mips/au1000/common/irq.c | |||
@@ -66,7 +66,6 @@ | |||
66 | #define EXT_INTC1_REQ1 5 /* IP 5 */ | 66 | #define EXT_INTC1_REQ1 5 /* IP 5 */ |
67 | #define MIPS_TIMER_IP 7 /* IP 7 */ | 67 | #define MIPS_TIMER_IP 7 /* IP 7 */ |
68 | 68 | ||
69 | extern asmlinkage void au1000_IRQ(void); | ||
70 | extern void set_debug_traps(void); | 69 | extern void set_debug_traps(void); |
71 | extern irq_cpustat_t irq_stat [NR_CPUS]; | 70 | extern irq_cpustat_t irq_stat [NR_CPUS]; |
72 | 71 | ||
@@ -446,7 +445,6 @@ void __init arch_init_irq(void) | |||
446 | extern int au1xxx_ic0_nr_irqs; | 445 | extern int au1xxx_ic0_nr_irqs; |
447 | 446 | ||
448 | cp0_status = read_c0_status(); | 447 | cp0_status = read_c0_status(); |
449 | set_except_vector(0, au1000_IRQ); | ||
450 | 448 | ||
451 | /* Initialize interrupt controllers to a safe state. | 449 | /* Initialize interrupt controllers to a safe state. |
452 | */ | 450 | */ |
@@ -661,3 +659,21 @@ restore_au1xxx_intctl(void) | |||
661 | au_writel(sleep_intctl_mask[0], IC0_MASKSET); au_sync(); | 659 | au_writel(sleep_intctl_mask[0], IC0_MASKSET); au_sync(); |
662 | } | 660 | } |
663 | #endif /* CONFIG_PM */ | 661 | #endif /* CONFIG_PM */ |
662 | |||
663 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) | ||
664 | { | ||
665 | unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; | ||
666 | |||
667 | if (pending & CAUSEF_IP7) | ||
668 | mips_timer_interrupt(regs); | ||
669 | else if (pending & CAUSEF_IP2) | ||
670 | intc0_req0_irqdispatch(regs); | ||
671 | else if (pending & CAUSEF_IP3) | ||
672 | intc0_req1_irqdispatch(regs); | ||
673 | else if (pending & CAUSEF_IP4) | ||
674 | intc1_req0_irqdispatch(regs); | ||
675 | else if (pending & CAUSEF_IP5) | ||
676 | intc1_req1_irqdispatch(regs); | ||
677 | else | ||
678 | spurious_interrupt(regs); | ||
679 | } | ||
diff --git a/arch/mips/cobalt/Makefile b/arch/mips/cobalt/Makefile index 720e757b2b64..225ac8f34ccd 100644 --- a/arch/mips/cobalt/Makefile +++ b/arch/mips/cobalt/Makefile | |||
@@ -2,7 +2,7 @@ | |||
2 | # Makefile for the Cobalt micro systems family specific parts of the kernel | 2 | # Makefile for the Cobalt micro systems family specific parts of the kernel |
3 | # | 3 | # |
4 | 4 | ||
5 | obj-y := irq.o int-handler.o reset.o setup.o | 5 | obj-y := irq.o reset.o setup.o |
6 | 6 | ||
7 | obj-$(CONFIG_EARLY_PRINTK) += console.o | 7 | obj-$(CONFIG_EARLY_PRINTK) += console.o |
8 | 8 | ||
diff --git a/arch/mips/cobalt/int-handler.S b/arch/mips/cobalt/int-handler.S deleted file mode 100644 index e75d5e3ca868..000000000000 --- a/arch/mips/cobalt/int-handler.S +++ /dev/null | |||
@@ -1,25 +0,0 @@ | |||
1 | /* | ||
2 | * This file is subject to the terms and conditions of the GNU General Public | ||
3 | * License. See the file "COPYING" in the main directory of this archive | ||
4 | * for more details. | ||
5 | * | ||
6 | * Copyright (C) 1995, 1996, 1997, 2003 by Ralf Baechle | ||
7 | * Copyright (C) 2001, 2002, 2003 by Liam Davies (ldavies@agile.tv) | ||
8 | */ | ||
9 | #include <asm/asm.h> | ||
10 | #include <asm/mipsregs.h> | ||
11 | #include <asm/mach-cobalt/cobalt.h> | ||
12 | #include <asm/regdef.h> | ||
13 | #include <asm/stackframe.h> | ||
14 | |||
15 | .text | ||
16 | .align 5 | ||
17 | NESTED(cobalt_handle_int, PT_SIZE, sp) | ||
18 | SAVE_ALL | ||
19 | CLI | ||
20 | |||
21 | PTR_LA ra, ret_from_irq | ||
22 | move a0, sp | ||
23 | j cobalt_irq | ||
24 | |||
25 | END(cobalt_handle_int) | ||
diff --git a/arch/mips/cobalt/irq.c b/arch/mips/cobalt/irq.c index f9a108820d6e..0b75f4fb7195 100644 --- a/arch/mips/cobalt/irq.c +++ b/arch/mips/cobalt/irq.c | |||
@@ -20,8 +20,6 @@ | |||
20 | 20 | ||
21 | #include <asm/mach-cobalt/cobalt.h> | 21 | #include <asm/mach-cobalt/cobalt.h> |
22 | 22 | ||
23 | extern void cobalt_handle_int(void); | ||
24 | |||
25 | /* | 23 | /* |
26 | * We have two types of interrupts that we handle, ones that come in through | 24 | * We have two types of interrupts that we handle, ones that come in through |
27 | * the CPU interrupt lines, and ones that come in on the via chip. The CPU | 25 | * the CPU interrupt lines, and ones that come in on the via chip. The CPU |
@@ -79,7 +77,7 @@ static inline void via_pic_irq(struct pt_regs *regs) | |||
79 | do_IRQ(irq, regs); | 77 | do_IRQ(irq, regs); |
80 | } | 78 | } |
81 | 79 | ||
82 | asmlinkage void cobalt_irq(struct pt_regs *regs) | 80 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) |
83 | { | 81 | { |
84 | unsigned pending; | 82 | unsigned pending; |
85 | 83 | ||
@@ -122,8 +120,6 @@ void __init arch_init_irq(void) | |||
122 | */ | 120 | */ |
123 | GALILEO_OUTL(0, GT_INTRMASK_OFS); | 121 | GALILEO_OUTL(0, GT_INTRMASK_OFS); |
124 | 122 | ||
125 | set_except_vector(0, cobalt_handle_int); | ||
126 | |||
127 | init_i8259_irqs(); /* 0 ... 15 */ | 123 | init_i8259_irqs(); /* 0 ... 15 */ |
128 | mips_cpu_irq_init(COBALT_CPU_IRQ); /* 16 ... 23 */ | 124 | mips_cpu_irq_init(COBALT_CPU_IRQ); /* 16 ... 23 */ |
129 | 125 | ||
diff --git a/arch/mips/ddb5xxx/ddb5074/Makefile b/arch/mips/ddb5xxx/ddb5074/Makefile index 488206b8d94e..304c02107b46 100644 --- a/arch/mips/ddb5xxx/ddb5074/Makefile +++ b/arch/mips/ddb5xxx/ddb5074/Makefile | |||
@@ -3,6 +3,6 @@ | |||
3 | # under Linux. | 3 | # under Linux. |
4 | # | 4 | # |
5 | 5 | ||
6 | obj-y += setup.o irq.o int-handler.o nile4_pic.o | 6 | obj-y += setup.o irq.o nile4_pic.o |
7 | 7 | ||
8 | EXTRA_AFLAGS := $(CFLAGS) | 8 | EXTRA_AFLAGS := $(CFLAGS) |
diff --git a/arch/mips/ddb5xxx/ddb5074/int-handler.S b/arch/mips/ddb5xxx/ddb5074/int-handler.S deleted file mode 100644 index a78644150b37..000000000000 --- a/arch/mips/ddb5xxx/ddb5074/int-handler.S +++ /dev/null | |||
@@ -1,120 +0,0 @@ | |||
1 | /* | ||
2 | * arch/mips/ddb5074/int-handler.S -- NEC DDB Vrc-5074 interrupt handler | ||
3 | * | ||
4 | * Based on arch/mips/sgi/kernel/indyIRQ.S | ||
5 | * | ||
6 | * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) | ||
7 | * | ||
8 | * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com> | ||
9 | * Sony Software Development Center Europe (SDCE), Brussels | ||
10 | */ | ||
11 | #include <asm/asm.h> | ||
12 | #include <asm/mipsregs.h> | ||
13 | #include <asm/regdef.h> | ||
14 | #include <asm/stackframe.h> | ||
15 | |||
16 | /* A lot of complication here is taken away because: | ||
17 | * | ||
18 | * 1) We handle one interrupt and return, sitting in a loop and moving across | ||
19 | * all the pending IRQ bits in the cause register is _NOT_ the answer, the | ||
20 | * common case is one pending IRQ so optimize in that direction. | ||
21 | * | ||
22 | * 2) We need not check against bits in the status register IRQ mask, that | ||
23 | * would make this routine slow as hell. | ||
24 | * | ||
25 | * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in | ||
26 | * between like BSD spl() brain-damage. | ||
27 | * | ||
28 | * Furthermore, the IRQs on the INDY look basically (barring software IRQs | ||
29 | * which we don't use at all) like: | ||
30 | * | ||
31 | * MIPS IRQ Source | ||
32 | * -------- ------ | ||
33 | * 0 Software (ignored) | ||
34 | * 1 Software (ignored) | ||
35 | * 2 Local IRQ level zero | ||
36 | * 3 Local IRQ level one | ||
37 | * 4 8254 Timer zero | ||
38 | * 5 8254 Timer one | ||
39 | * 6 Bus Error | ||
40 | * 7 R4k timer (what we use) | ||
41 | * | ||
42 | * We handle the IRQ according to _our_ priority which is: | ||
43 | * | ||
44 | * Highest ---- R4k Timer | ||
45 | * Local IRQ zero | ||
46 | * Local IRQ one | ||
47 | * Bus Error | ||
48 | * 8254 Timer zero | ||
49 | * Lowest ---- 8254 Timer one | ||
50 | * | ||
51 | * then we just return, if multiple IRQs are pending then we will just take | ||
52 | * another exception, big deal. | ||
53 | */ | ||
54 | |||
55 | .text | ||
56 | .set noreorder | ||
57 | .set noat | ||
58 | .align 5 | ||
59 | NESTED(ddbIRQ, PT_SIZE, sp) | ||
60 | SAVE_ALL | ||
61 | CLI | ||
62 | .set at | ||
63 | mfc0 s0, CP0_CAUSE # get irq mask | ||
64 | |||
65 | #if 1 | ||
66 | mfc0 t2,CP0_STATUS # get enabled interrupts | ||
67 | and s0,t2 # isolate allowed ones | ||
68 | #endif | ||
69 | /* First we check for r4k counter/timer IRQ. */ | ||
70 | andi a0, s0, CAUSEF_IP2 # delay slot, check local level zero | ||
71 | beq a0, zero, 1f | ||
72 | andi a0, s0, CAUSEF_IP3 # delay slot, check local level one | ||
73 | |||
74 | /* Wheee, local level zero interrupt. */ | ||
75 | jal ddb_local0_irqdispatch | ||
76 | move a0, sp # delay slot | ||
77 | |||
78 | j ret_from_irq | ||
79 | nop # delay slot | ||
80 | |||
81 | 1: | ||
82 | beq a0, zero, 1f | ||
83 | andi a0, s0, CAUSEF_IP6 # delay slot, check bus error | ||
84 | |||
85 | /* Wheee, local level one interrupt. */ | ||
86 | move a0, sp | ||
87 | jal ddb_local1_irqdispatch | ||
88 | nop | ||
89 | |||
90 | j ret_from_irq | ||
91 | nop | ||
92 | |||
93 | 1: | ||
94 | beq a0, zero, 1f | ||
95 | nop | ||
96 | |||
97 | /* Wheee, an asynchronous bus error... */ | ||
98 | move a0, sp | ||
99 | jal ddb_buserror_irq | ||
100 | nop | ||
101 | |||
102 | j ret_from_irq | ||
103 | nop | ||
104 | |||
105 | 1: | ||
106 | /* Here by mistake? This is possible, what can happen | ||
107 | * is that by the time we take the exception the IRQ | ||
108 | * pin goes low, so just leave if this is the case. | ||
109 | */ | ||
110 | andi a0, s0, (CAUSEF_IP4 | CAUSEF_IP5) | ||
111 | beq a0, zero, 1f | ||
112 | |||
113 | /* Must be one of the 8254 timers... */ | ||
114 | move a0, sp | ||
115 | jal ddb_8254timer_irq | ||
116 | nop | ||
117 | 1: | ||
118 | j ret_from_irq | ||
119 | nop | ||
120 | END(ddbIRQ) | ||
diff --git a/arch/mips/ddb5xxx/ddb5074/irq.c b/arch/mips/ddb5xxx/ddb5074/irq.c index 45088a1be414..60c087b7738c 100644 --- a/arch/mips/ddb5xxx/ddb5074/irq.c +++ b/arch/mips/ddb5xxx/ddb5074/irq.c | |||
@@ -21,8 +21,6 @@ | |||
21 | #include <asm/ddb5xxx/ddb5074.h> | 21 | #include <asm/ddb5xxx/ddb5074.h> |
22 | 22 | ||
23 | 23 | ||
24 | extern asmlinkage void ddbIRQ(void); | ||
25 | |||
26 | static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL }; | 24 | static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL }; |
27 | 25 | ||
28 | #define M1543_PNP_CONFIG 0x03f0 /* PnP Config Port */ | 26 | #define M1543_PNP_CONFIG 0x03f0 /* PnP Config Port */ |
@@ -90,7 +88,7 @@ static void m1543_irq_setup(void) | |||
90 | 88 | ||
91 | } | 89 | } |
92 | 90 | ||
93 | void ddb_local0_irqdispatch(struct pt_regs *regs) | 91 | static void ddb_local0_irqdispatch(struct pt_regs *regs) |
94 | { | 92 | { |
95 | u32 mask; | 93 | u32 mask; |
96 | int nile4_irq; | 94 | int nile4_irq; |
@@ -118,29 +116,41 @@ void ddb_local0_irqdispatch(struct pt_regs *regs) | |||
118 | } | 116 | } |
119 | } | 117 | } |
120 | 118 | ||
121 | void ddb_local1_irqdispatch(void) | 119 | static void ddb_local1_irqdispatch(void) |
122 | { | 120 | { |
123 | printk("ddb_local1_irqdispatch called\n"); | 121 | printk("ddb_local1_irqdispatch called\n"); |
124 | } | 122 | } |
125 | 123 | ||
126 | void ddb_buserror_irq(void) | 124 | static void ddb_buserror_irq(void) |
127 | { | 125 | { |
128 | printk("ddb_buserror_irq called\n"); | 126 | printk("ddb_buserror_irq called\n"); |
129 | } | 127 | } |
130 | 128 | ||
131 | void ddb_8254timer_irq(void) | 129 | static void ddb_8254timer_irq(void) |
132 | { | 130 | { |
133 | printk("ddb_8254timer_irq called\n"); | 131 | printk("ddb_8254timer_irq called\n"); |
134 | } | 132 | } |
135 | 133 | ||
134 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) | ||
135 | { | ||
136 | unsigned int pending = read_c0_cause() & read_c0_status(); | ||
137 | |||
138 | if (pending & CAUSEF_IP2) | ||
139 | ddb_local0_irqdispatch(regs); | ||
140 | else if (pending & CAUSEF_IP3) | ||
141 | ddb_local1_irqdispatch(); | ||
142 | else if (pending & CAUSEF_IP6) | ||
143 | ddb_buserror_irq(); | ||
144 | else if (pending & (CAUSEF_IP4 | CAUSEF_IP5)) | ||
145 | ddb_8254timer_irq(); | ||
146 | } | ||
147 | |||
136 | void __init arch_init_irq(void) | 148 | void __init arch_init_irq(void) |
137 | { | 149 | { |
138 | /* setup cascade interrupts */ | 150 | /* setup cascade interrupts */ |
139 | setup_irq(NILE4_IRQ_BASE + NILE4_INT_INTE, &irq_cascade); | 151 | setup_irq(NILE4_IRQ_BASE + NILE4_INT_INTE, &irq_cascade); |
140 | setup_irq(CPU_IRQ_BASE + CPU_NILE4_CASCADE, &irq_cascade); | 152 | setup_irq(CPU_IRQ_BASE + CPU_NILE4_CASCADE, &irq_cascade); |
141 | 153 | ||
142 | set_except_vector(0, ddbIRQ); | ||
143 | |||
144 | nile4_irq_setup(NILE4_IRQ_BASE); | 154 | nile4_irq_setup(NILE4_IRQ_BASE); |
145 | m1543_irq_setup(); | 155 | m1543_irq_setup(); |
146 | init_i8259_irqs(); | 156 | init_i8259_irqs(); |
diff --git a/arch/mips/ddb5xxx/ddb5476/Makefile b/arch/mips/ddb5xxx/ddb5476/Makefile index 61eec363cb02..ab0312cb47b4 100644 --- a/arch/mips/ddb5xxx/ddb5476/Makefile +++ b/arch/mips/ddb5xxx/ddb5476/Makefile | |||
@@ -3,7 +3,7 @@ | |||
3 | # under Linux. | 3 | # under Linux. |
4 | # | 4 | # |
5 | 5 | ||
6 | obj-y += setup.o irq.o int-handler.o nile4_pic.o vrc5476_irq.o | 6 | obj-y += setup.o irq.o nile4_pic.o vrc5476_irq.o |
7 | obj-$(CONFIG_KGDB) += dbg_io.o | 7 | obj-$(CONFIG_KGDB) += dbg_io.o |
8 | 8 | ||
9 | EXTRA_AFLAGS := $(CFLAGS) | 9 | EXTRA_AFLAGS := $(CFLAGS) |
diff --git a/arch/mips/ddb5xxx/ddb5476/int-handler.S b/arch/mips/ddb5xxx/ddb5476/int-handler.S deleted file mode 100644 index 0c2bdae96bb1..000000000000 --- a/arch/mips/ddb5xxx/ddb5476/int-handler.S +++ /dev/null | |||
@@ -1,113 +0,0 @@ | |||
1 | /* | ||
2 | * Copyright 2001 MontaVista Software Inc. | ||
3 | * Author: jsun@mvista.com or jsun@junsun.net | ||
4 | * | ||
5 | * First-level interrupt dispatcher for ddb5476 | ||
6 | * | ||
7 | * This program is free software; you can redistribute it and/or modify it | ||
8 | * under the terms of the GNU General Public License as published by the | ||
9 | * Free Software Foundation; either version 2 of the License, or (at your | ||
10 | * option) any later version. | ||
11 | */ | ||
12 | #include <asm/asm.h> | ||
13 | #include <asm/mipsregs.h> | ||
14 | #include <asm/addrspace.h> | ||
15 | #include <asm/regdef.h> | ||
16 | #include <asm/stackframe.h> | ||
17 | |||
18 | #include <asm/ddb5xxx/ddb5476.h> | ||
19 | |||
20 | /* | ||
21 | * first level interrupt dispatcher for ocelot board - | ||
22 | * We check for the timer first, then check PCI ints A and D. | ||
23 | * Then check for serial IRQ and fall through. | ||
24 | */ | ||
25 | .align 5 | ||
26 | NESTED(ddb5476_handle_int, PT_SIZE, sp) | ||
27 | SAVE_ALL | ||
28 | CLI | ||
29 | .set at | ||
30 | .set noreorder | ||
31 | mfc0 t0, CP0_CAUSE | ||
32 | mfc0 t2, CP0_STATUS | ||
33 | |||
34 | and t0, t2 | ||
35 | |||
36 | andi t1, t0, STATUSF_IP7 /* cpu timer */ | ||
37 | bnez t1, ll_cpu_ip7 | ||
38 | andi t1, t0, STATUSF_IP2 /* vrc5476 & i8259 */ | ||
39 | bnez t1, ll_cpu_ip2 | ||
40 | andi t1, t0, STATUSF_IP3 | ||
41 | bnez t1, ll_cpu_ip3 | ||
42 | andi t1, t0, STATUSF_IP4 | ||
43 | bnez t1, ll_cpu_ip4 | ||
44 | andi t1, t0, STATUSF_IP5 | ||
45 | bnez t1, ll_cpu_ip5 | ||
46 | andi t1, t0, STATUSF_IP6 | ||
47 | bnez t1, ll_cpu_ip6 | ||
48 | andi t1, t0, STATUSF_IP0 /* software int 0 */ | ||
49 | bnez t1, ll_cpu_ip0 | ||
50 | andi t1, t0, STATUSF_IP1 /* software int 1 */ | ||
51 | bnez t1, ll_cpu_ip1 | ||
52 | nop | ||
53 | |||
54 | .set reorder | ||
55 | |||
56 | /* wrong alarm or masked ... */ | ||
57 | // jal spurious_interrupt | ||
58 | // j ret_from_irq | ||
59 | move a0, sp | ||
60 | jal vrc5476_irq_dispatch | ||
61 | j ret_from_irq | ||
62 | nop | ||
63 | |||
64 | .align 5 | ||
65 | |||
66 | ll_cpu_ip0: | ||
67 | li a0, CPU_IRQ_BASE + 0 | ||
68 | move a1, sp | ||
69 | jal do_IRQ | ||
70 | j ret_from_irq | ||
71 | |||
72 | ll_cpu_ip1: | ||
73 | li a0, CPU_IRQ_BASE + 1 | ||
74 | move a1, sp | ||
75 | jal do_IRQ | ||
76 | j ret_from_irq | ||
77 | |||
78 | ll_cpu_ip2: /* jump to second-level dispatching */ | ||
79 | move a0, sp | ||
80 | jal vrc5476_irq_dispatch | ||
81 | j ret_from_irq | ||
82 | |||
83 | ll_cpu_ip3: | ||
84 | li a0, CPU_IRQ_BASE + 3 | ||
85 | move a1, sp | ||
86 | jal do_IRQ | ||
87 | j ret_from_irq | ||
88 | |||
89 | ll_cpu_ip4: | ||
90 | li a0, CPU_IRQ_BASE + 4 | ||
91 | move a1, sp | ||
92 | jal do_IRQ | ||
93 | j ret_from_irq | ||
94 | |||
95 | ll_cpu_ip5: | ||
96 | li a0, CPU_IRQ_BASE + 5 | ||
97 | move a1, sp | ||
98 | jal do_IRQ | ||
99 | j ret_from_irq | ||
100 | |||
101 | ll_cpu_ip6: | ||
102 | li a0, CPU_IRQ_BASE + 6 | ||
103 | move a1, sp | ||
104 | jal do_IRQ | ||
105 | j ret_from_irq | ||
106 | |||
107 | ll_cpu_ip7: | ||
108 | li a0, CPU_IRQ_BASE + 7 | ||
109 | move a1, sp | ||
110 | jal do_IRQ | ||
111 | j ret_from_irq | ||
112 | |||
113 | END(ddb5476_handle_int) | ||
diff --git a/arch/mips/ddb5xxx/ddb5476/irq.c b/arch/mips/ddb5xxx/ddb5476/irq.c index 5388b5868c4a..7583a1f30711 100644 --- a/arch/mips/ddb5xxx/ddb5476/irq.c +++ b/arch/mips/ddb5xxx/ddb5476/irq.c | |||
@@ -110,11 +110,36 @@ static void nile4_irq_setup(void) | |||
110 | static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL }; | 110 | static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL }; |
111 | static struct irqaction irq_error = { no_action, 0, CPU_MASK_NONE, "error", NULL, NULL }; | 111 | static struct irqaction irq_error = { no_action, 0, CPU_MASK_NONE, "error", NULL, NULL }; |
112 | 112 | ||
113 | extern asmlinkage void ddb5476_handle_int(void); | ||
114 | extern int setup_irq(unsigned int irq, struct irqaction *irqaction); | 113 | extern int setup_irq(unsigned int irq, struct irqaction *irqaction); |
115 | extern void mips_cpu_irq_init(u32 irq_base); | 114 | extern void mips_cpu_irq_init(u32 irq_base); |
116 | extern void vrc5476_irq_init(u32 irq_base); | 115 | extern void vrc5476_irq_init(u32 irq_base); |
117 | 116 | ||
117 | extern void vrc5476_irq_dispatch(struct pt_regs *regs); | ||
118 | |||
119 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) | ||
120 | { | ||
121 | unsigned int pending = read_c0_cause() & read_c0_status(); | ||
122 | |||
123 | if (pending & STATUSF_IP7) | ||
124 | do_IRQ(CPU_IRQ_BASE + 7, regs); | ||
125 | else if (pending & STATUSF_IP2) | ||
126 | vrc5476_irq_dispatch(regs); | ||
127 | else if (pending & STATUSF_IP3) | ||
128 | do_IRQ(CPU_IRQ_BASE + 3, regs); | ||
129 | else if (pending & STATUSF_IP4) | ||
130 | do_IRQ(CPU_IRQ_BASE + 4, regs); | ||
131 | else if (pending & STATUSF_IP5) | ||
132 | do_IRQ(CPU_IRQ_BASE + 5, regs); | ||
133 | else if (pending & STATUSF_IP6) | ||
134 | do_IRQ(CPU_IRQ_BASE + 6, regs); | ||
135 | else if (pending & STATUSF_IP0) | ||
136 | do_IRQ(CPU_IRQ_BASE, regs); | ||
137 | else if (pending & STATUSF_IP1) | ||
138 | do_IRQ(CPU_IRQ_BASE + 1, regs); | ||
139 | |||
140 | vrc5476_irq_dispatch(regs); | ||
141 | } | ||
142 | |||
118 | void __init arch_init_irq(void) | 143 | void __init arch_init_irq(void) |
119 | { | 144 | { |
120 | /* hardware initialization */ | 145 | /* hardware initialization */ |
@@ -137,7 +162,4 @@ void __init arch_init_irq(void) | |||
137 | setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_LBRT, &irq_error); | 162 | setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_LBRT, &irq_error); |
138 | setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_PCIS, &irq_error); | 163 | setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_PCIS, &irq_error); |
139 | setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_PCI, &irq_error); | 164 | setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_PCI, &irq_error); |
140 | |||
141 | /* setup the grandpa intr vector */ | ||
142 | set_except_vector(0, ddb5476_handle_int); | ||
143 | } | 165 | } |
diff --git a/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c b/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c index 581eabad5f82..a3c5e7b18018 100644 --- a/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c +++ b/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c | |||
@@ -77,7 +77,7 @@ vrc5476_irq_init(u32 base) | |||
77 | } | 77 | } |
78 | 78 | ||
79 | 79 | ||
80 | asmlinkage void | 80 | void |
81 | vrc5476_irq_dispatch(struct pt_regs *regs) | 81 | vrc5476_irq_dispatch(struct pt_regs *regs) |
82 | { | 82 | { |
83 | u32 mask; | 83 | u32 mask; |
diff --git a/arch/mips/ddb5xxx/ddb5477/Makefile b/arch/mips/ddb5xxx/ddb5477/Makefile index b79b43c9f93b..ea68815ad17a 100644 --- a/arch/mips/ddb5xxx/ddb5477/Makefile +++ b/arch/mips/ddb5xxx/ddb5477/Makefile | |||
@@ -2,7 +2,7 @@ | |||
2 | # Makefile for NEC DDB-Vrc5477 board | 2 | # Makefile for NEC DDB-Vrc5477 board |
3 | # | 3 | # |
4 | 4 | ||
5 | obj-y += int-handler.o irq.o irq_5477.o setup.o lcd44780.o | 5 | obj-y += irq.o irq_5477.o setup.o lcd44780.o |
6 | 6 | ||
7 | obj-$(CONFIG_RUNTIME_DEBUG) += debug.o | 7 | obj-$(CONFIG_RUNTIME_DEBUG) += debug.o |
8 | obj-$(CONFIG_KGDB) += kgdb_io.o | 8 | obj-$(CONFIG_KGDB) += kgdb_io.o |
diff --git a/arch/mips/ddb5xxx/ddb5477/int-handler.S b/arch/mips/ddb5xxx/ddb5477/int-handler.S deleted file mode 100644 index 9884874dbeb5..000000000000 --- a/arch/mips/ddb5xxx/ddb5477/int-handler.S +++ /dev/null | |||
@@ -1,75 +0,0 @@ | |||
1 | /* | ||
2 | * Copyright 2001 MontaVista Software Inc. | ||
3 | * Author: jsun@mvista.com or jsun@junsun.net | ||
4 | * | ||
5 | * First-level interrupt dispatcher for ddb5477 | ||
6 | * | ||
7 | * This program is free software; you can redistribute it and/or modify it | ||
8 | * under the terms of the GNU General Public License as published by the | ||
9 | * Free Software Foundation; either version 2 of the License, or (at your | ||
10 | * option) any later version. | ||
11 | */ | ||
12 | #include <asm/asm.h> | ||
13 | #include <asm/mipsregs.h> | ||
14 | #include <asm/addrspace.h> | ||
15 | #include <asm/regdef.h> | ||
16 | #include <asm/stackframe.h> | ||
17 | #include <asm/ddb5xxx/ddb5477.h> | ||
18 | |||
19 | /* | ||
20 | * first level interrupt dispatcher for ocelot board - | ||
21 | * We check for the timer first, then check PCI ints A and D. | ||
22 | * Then check for serial IRQ and fall through. | ||
23 | */ | ||
24 | .align 5 | ||
25 | NESTED(ddb5477_handle_int, PT_SIZE, sp) | ||
26 | SAVE_ALL | ||
27 | CLI | ||
28 | .set at | ||
29 | .set noreorder | ||
30 | mfc0 t0, CP0_CAUSE | ||
31 | mfc0 t2, CP0_STATUS | ||
32 | |||
33 | and t0, t2 | ||
34 | |||
35 | andi t1, t0, STATUSF_IP7 /* cpu timer */ | ||
36 | bnez t1, ll_cputimer_irq | ||
37 | andi t1, t0, (STATUSF_IP2 | STATUSF_IP3 | STATUSF_IP4 | STATUSF_IP5 | STATUSF_IP6 ) | ||
38 | bnez t1, ll_vrc5477_irq | ||
39 | andi t1, t0, STATUSF_IP0 /* software int 0 */ | ||
40 | bnez t1, ll_cpu_ip0 | ||
41 | andi t1, t0, STATUSF_IP1 /* software int 1 */ | ||
42 | bnez t1, ll_cpu_ip1 | ||
43 | nop | ||
44 | .set reorder | ||
45 | |||
46 | /* wrong alarm or masked ... */ | ||
47 | jal spurious_interrupt | ||
48 | j ret_from_irq | ||
49 | END(ddb5477_handle_int) | ||
50 | |||
51 | .align 5 | ||
52 | |||
53 | ll_vrc5477_irq: | ||
54 | move a0, sp | ||
55 | jal vrc5477_irq_dispatch | ||
56 | j ret_from_irq | ||
57 | |||
58 | ll_cputimer_irq: | ||
59 | li a0, CPU_IRQ_BASE + 7 | ||
60 | move a1, sp | ||
61 | jal do_IRQ | ||
62 | j ret_from_irq | ||
63 | |||
64 | |||
65 | ll_cpu_ip0: | ||
66 | li a0, CPU_IRQ_BASE + 0 | ||
67 | move a1, sp | ||
68 | jal do_IRQ | ||
69 | j ret_from_irq | ||
70 | |||
71 | ll_cpu_ip1: | ||
72 | li a0, CPU_IRQ_BASE + 1 | ||
73 | move a1, sp | ||
74 | jal do_IRQ | ||
75 | j ret_from_irq | ||
diff --git a/arch/mips/ddb5xxx/ddb5477/irq.c b/arch/mips/ddb5xxx/ddb5477/irq.c index 9ffe1a9142ca..de433cf9fb50 100644 --- a/arch/mips/ddb5xxx/ddb5477/irq.c +++ b/arch/mips/ddb5xxx/ddb5477/irq.c | |||
@@ -75,7 +75,6 @@ set_pci_int_attr(u32 pci, u32 intn, u32 active, u32 trigger) | |||
75 | 75 | ||
76 | extern void vrc5477_irq_init(u32 base); | 76 | extern void vrc5477_irq_init(u32 base); |
77 | extern void mips_cpu_irq_init(u32 base); | 77 | extern void mips_cpu_irq_init(u32 base); |
78 | extern asmlinkage void ddb5477_handle_int(void); | ||
79 | extern int setup_irq(unsigned int irq, struct irqaction *irqaction); | 78 | extern int setup_irq(unsigned int irq, struct irqaction *irqaction); |
80 | static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL }; | 79 | static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL }; |
81 | 80 | ||
@@ -135,9 +134,6 @@ void __init arch_init_irq(void) | |||
135 | /* setup cascade interrupts */ | 134 | /* setup cascade interrupts */ |
136 | setup_irq(VRC5477_IRQ_BASE + VRC5477_I8259_CASCADE, &irq_cascade); | 135 | setup_irq(VRC5477_IRQ_BASE + VRC5477_I8259_CASCADE, &irq_cascade); |
137 | setup_irq(CPU_IRQ_BASE + CPU_VRC5477_CASCADE, &irq_cascade); | 136 | setup_irq(CPU_IRQ_BASE + CPU_VRC5477_CASCADE, &irq_cascade); |
138 | |||
139 | /* hook up the first-level interrupt handler */ | ||
140 | set_except_vector(0, ddb5477_handle_int); | ||
141 | } | 137 | } |
142 | 138 | ||
143 | u8 i8259_interrupt_ack(void) | 139 | u8 i8259_interrupt_ack(void) |
@@ -159,7 +155,7 @@ u8 i8259_interrupt_ack(void) | |||
159 | * the first level int-handler will jump here if it is a vrc5477 irq | 155 | * the first level int-handler will jump here if it is a vrc5477 irq |
160 | */ | 156 | */ |
161 | #define NUM_5477_IRQS 32 | 157 | #define NUM_5477_IRQS 32 |
162 | asmlinkage void | 158 | static void |
163 | vrc5477_irq_dispatch(struct pt_regs *regs) | 159 | vrc5477_irq_dispatch(struct pt_regs *regs) |
164 | { | 160 | { |
165 | u32 intStatus; | 161 | u32 intStatus; |
@@ -197,3 +193,21 @@ vrc5477_irq_dispatch(struct pt_regs *regs) | |||
197 | } | 193 | } |
198 | } | 194 | } |
199 | } | 195 | } |
196 | |||
197 | #define VR5477INTS (STATUSF_IP2|STATUSF_IP3|STATUSF_IP4|STATUSF_IP5|STATUSF_IP6) | ||
198 | |||
199 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) | ||
200 | { | ||
201 | unsigned int pending = read_c0_cause() & read_c0_status(); | ||
202 | |||
203 | if (pending & STATUSF_IP7) | ||
204 | do_IRQ(CPU_IRQ_BASE + 7, regs); | ||
205 | else if (pending & VR5477INTS) | ||
206 | vrc5477_irq_dispatch(regs); | ||
207 | else if (pending & STATUSF_IP0) | ||
208 | do_IRQ(CPU_IRQ_BASE, regs); | ||
209 | else if (pending & STATUSF_IP1) | ||
210 | do_IRQ(CPU_IRQ_BASE + 1, regs); | ||
211 | else | ||
212 | spurious_interrupt(regs); | ||
213 | } | ||
diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S index 5bafd585ac3e..e8ec93e33fe6 100644 --- a/arch/mips/dec/int-handler.S +++ b/arch/mips/dec/int-handler.S | |||
@@ -36,7 +36,7 @@ | |||
36 | .text | 36 | .text |
37 | .set noreorder | 37 | .set noreorder |
38 | /* | 38 | /* |
39 | * decstation_handle_int: Interrupt handler for DECstations | 39 | * plat_irq_dispatch: Interrupt handler for DECstations |
40 | * | 40 | * |
41 | * We follow the model in the Indy interrupt code by David Miller, where he | 41 | * We follow the model in the Indy interrupt code by David Miller, where he |
42 | * says: a lot of complication here is taken away because: | 42 | * says: a lot of complication here is taken away because: |
@@ -125,11 +125,7 @@ | |||
125 | * just take another exception, big deal. | 125 | * just take another exception, big deal. |
126 | */ | 126 | */ |
127 | .align 5 | 127 | .align 5 |
128 | NESTED(decstation_handle_int, PT_SIZE, ra) | 128 | NESTED(plat_irq_dispatch, PT_SIZE, ra) |
129 | .set noat | ||
130 | SAVE_ALL | ||
131 | CLI # TEST: interrupts should be off | ||
132 | .set at | ||
133 | .set noreorder | 129 | .set noreorder |
134 | 130 | ||
135 | /* | 131 | /* |
@@ -286,7 +282,7 @@ spurious: | |||
286 | nop | 282 | nop |
287 | j ret_from_irq | 283 | j ret_from_irq |
288 | nop | 284 | nop |
289 | END(decstation_handle_int) | 285 | END(plat_irq_dispatch) |
290 | 286 | ||
291 | /* | 287 | /* |
292 | * Generic unimplemented interrupt routines -- cpu_mask_nr_tbl | 288 | * Generic unimplemented interrupt routines -- cpu_mask_nr_tbl |
diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c index 7c1ca8f6330e..ad5d436d80c1 100644 --- a/arch/mips/dec/setup.c +++ b/arch/mips/dec/setup.c | |||
@@ -48,8 +48,6 @@ extern void dec_machine_halt(void); | |||
48 | extern void dec_machine_power_off(void); | 48 | extern void dec_machine_power_off(void); |
49 | extern irqreturn_t dec_intr_halt(int irq, void *dev_id, struct pt_regs *regs); | 49 | extern irqreturn_t dec_intr_halt(int irq, void *dev_id, struct pt_regs *regs); |
50 | 50 | ||
51 | extern asmlinkage void decstation_handle_int(void); | ||
52 | |||
53 | unsigned long dec_kn_slot_base, dec_kn_slot_size; | 51 | unsigned long dec_kn_slot_base, dec_kn_slot_size; |
54 | 52 | ||
55 | EXPORT_SYMBOL(dec_kn_slot_base); | 53 | EXPORT_SYMBOL(dec_kn_slot_base); |
@@ -744,7 +742,6 @@ void __init arch_init_irq(void) | |||
744 | panic("Don't know how to set this up!"); | 742 | panic("Don't know how to set this up!"); |
745 | break; | 743 | break; |
746 | } | 744 | } |
747 | set_except_vector(0, decstation_handle_int); | ||
748 | 745 | ||
749 | /* Free the FPU interrupt if the exception is present. */ | 746 | /* Free the FPU interrupt if the exception is present. */ |
750 | if (!cpu_has_nofpuex) { | 747 | if (!cpu_has_nofpuex) { |
diff --git a/arch/mips/galileo-boards/ev96100/Makefile b/arch/mips/galileo-boards/ev96100/Makefile index 58c02f9db69d..cd868ec78cbc 100644 --- a/arch/mips/galileo-boards/ev96100/Makefile +++ b/arch/mips/galileo-boards/ev96100/Makefile | |||
@@ -6,4 +6,4 @@ | |||
6 | # Makefile for the Galileo EV96100 board. | 6 | # Makefile for the Galileo EV96100 board. |
7 | # | 7 | # |
8 | 8 | ||
9 | obj-y += init.o irq.o puts.o reset.o time.o int-handler.o setup.o | 9 | obj-y += init.o irq.o puts.o reset.o time.o setup.o |
diff --git a/arch/mips/galileo-boards/ev96100/int-handler.S b/arch/mips/galileo-boards/ev96100/int-handler.S deleted file mode 100644 index 0edf1fec2905..000000000000 --- a/arch/mips/galileo-boards/ev96100/int-handler.S +++ /dev/null | |||
@@ -1,34 +0,0 @@ | |||
1 | #include <asm/asm.h> | ||
2 | #include <asm/mipsregs.h> | ||
3 | #include <asm/regdef.h> | ||
4 | #include <asm/stackframe.h> | ||
5 | |||
6 | .set noat | ||
7 | .align 5 | ||
8 | |||
9 | NESTED(ev96100IRQ, PT_SIZE, sp) | ||
10 | SAVE_ALL | ||
11 | CLI # Important: mark KERNEL mode ! | ||
12 | |||
13 | mfc0 t0, CP0_CAUSE # get pending interrupts | ||
14 | mfc0 t1, CP0_STATUS # get enabled interrupts | ||
15 | and t0, t1 # isolate allowed ones | ||
16 | |||
17 | # FIX ME add R7000 extensions | ||
18 | andi t0,0xff00 # isolate pending bits | ||
19 | andi a0, t0, CAUSEF_IP7 | ||
20 | beq a0, zero, 1f | ||
21 | move a0, sp | ||
22 | jal mips_timer_interrupt | ||
23 | j ret_from_irq | ||
24 | |||
25 | 1: beqz t0, 3f # spurious interrupt | ||
26 | |||
27 | move a0, t0 | ||
28 | move a1, sp | ||
29 | jal ev96100_cpu_irq | ||
30 | j ret_from_irq | ||
31 | |||
32 | 3: jal spurious_interrupt | ||
33 | j ret_from_irq | ||
34 | END(ev96100IRQ) | ||
diff --git a/arch/mips/galileo-boards/ev96100/irq.c b/arch/mips/galileo-boards/ev96100/irq.c index 383801dd1b95..ee5d6720f23b 100644 --- a/arch/mips/galileo-boards/ev96100/irq.c +++ b/arch/mips/galileo-boards/ev96100/irq.c | |||
@@ -40,8 +40,6 @@ | |||
40 | #include <linux/interrupt.h> | 40 | #include <linux/interrupt.h> |
41 | #include <asm/irq_cpu.h> | 41 | #include <asm/irq_cpu.h> |
42 | 42 | ||
43 | extern asmlinkage void ev96100IRQ(void); | ||
44 | |||
45 | static inline unsigned int ffz8(unsigned int word) | 43 | static inline unsigned int ffz8(unsigned int word) |
46 | { | 44 | { |
47 | unsigned long k; | 45 | unsigned long k; |
@@ -54,13 +52,26 @@ static inline unsigned int ffz8(unsigned int word) | |||
54 | return k; | 52 | return k; |
55 | } | 53 | } |
56 | 54 | ||
55 | extern void mips_timer_interrupt(struct pt_regs *regs); | ||
56 | |||
57 | asmlinkage void ev96100_cpu_irq(unsigned int pending, struct pt_regs *regs) | 57 | asmlinkage void ev96100_cpu_irq(unsigned int pending, struct pt_regs *regs) |
58 | { | 58 | { |
59 | do_IRQ(ffz8(pending >> 8), regs); | 59 | do_IRQ(ffz8(pending >> 8), regs); |
60 | } | 60 | } |
61 | 61 | ||
62 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) | ||
63 | { | ||
64 | unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; | ||
65 | |||
66 | if (pending & CAUSEF_IP7) | ||
67 | mips_timer_interrupt(regs); | ||
68 | else if (pending) | ||
69 | ev96100_cpu_irq(pending, regs); | ||
70 | else | ||
71 | spurious_interrupt(regs); | ||
72 | } | ||
73 | |||
62 | void __init arch_init_irq(void) | 74 | void __init arch_init_irq(void) |
63 | { | 75 | { |
64 | set_except_vector(0, ev96100IRQ); | ||
65 | mips_cpu_irq_init(0); | 76 | mips_cpu_irq_init(0); |
66 | } | 77 | } |
diff --git a/arch/mips/gt64120/ev64120/Makefile b/arch/mips/gt64120/ev64120/Makefile index ebe91c57e173..b2c53a8f8718 100644 --- a/arch/mips/gt64120/ev64120/Makefile +++ b/arch/mips/gt64120/ev64120/Makefile | |||
@@ -6,6 +6,6 @@ | |||
6 | # Makefile for the Galileo EV64120 board. | 6 | # Makefile for the Galileo EV64120 board. |
7 | # | 7 | # |
8 | 8 | ||
9 | obj-y += int-handler.o irq.o promcon.o reset.o serialGT.o setup.o | 9 | obj-y += irq.o promcon.o reset.o serialGT.o setup.o |
10 | 10 | ||
11 | EXTRA_AFLAGS := $(CFLAGS) | 11 | EXTRA_AFLAGS := $(CFLAGS) |
diff --git a/arch/mips/gt64120/ev64120/int-handler.S b/arch/mips/gt64120/ev64120/int-handler.S deleted file mode 100644 index 9dda5b449522..000000000000 --- a/arch/mips/gt64120/ev64120/int-handler.S +++ /dev/null | |||
@@ -1,114 +0,0 @@ | |||
1 | /* | ||
2 | * int-handler.S | ||
3 | * | ||
4 | * Based on the cobalt handler. | ||
5 | */ | ||
6 | #include <asm/asm.h> | ||
7 | #include <asm/mipsregs.h> | ||
8 | #include <asm/addrspace.h> | ||
9 | #include <asm/regdef.h> | ||
10 | #include <asm/stackframe.h> | ||
11 | |||
12 | /* | ||
13 | * galileo_handle_int - | ||
14 | * We check for the timer first, then check PCI ints A and D. | ||
15 | * Then check for serial IRQ and fall through. | ||
16 | */ | ||
17 | .align 5 | ||
18 | .set reorder | ||
19 | .set noat | ||
20 | NESTED(galileo_handle_int, PT_SIZE, sp) | ||
21 | SAVE_ALL | ||
22 | CLI | ||
23 | .set at | ||
24 | mfc0 t0,CP0_CAUSE | ||
25 | mfc0 t2,CP0_STATUS | ||
26 | |||
27 | and t0,t2 | ||
28 | |||
29 | andi t1,t0,STATUSF_IP4 /* int2 hardware line (timer) */ | ||
30 | bnez t1,ll_gt64120_irq | ||
31 | andi t1,t0,STATUSF_IP2 /* int0 hardware line */ | ||
32 | bnez t1,ll_pci_intA | ||
33 | andi t1,t0,STATUSF_IP5 /* int3 hardware line */ | ||
34 | bnez t1,ll_pci_intD | ||
35 | andi t1,t0,STATUSF_IP6 /* int4 hardware line */ | ||
36 | bnez t1,ll_serial_irq | ||
37 | andi t1,t0,STATUSF_IP7 /* compare int */ | ||
38 | bnez t1,ll_compare_irq | ||
39 | nop | ||
40 | |||
41 | /* wrong alarm or masked ... */ | ||
42 | jal spurious_interrupt | ||
43 | nop | ||
44 | j ret_from_irq | ||
45 | END(galileo_handle_int) | ||
46 | |||
47 | |||
48 | .align 5 | ||
49 | .set reorder | ||
50 | ll_gt64120_irq: | ||
51 | li a0,4 | ||
52 | move a1,sp | ||
53 | jal do_IRQ | ||
54 | nop | ||
55 | j ret_from_irq | ||
56 | nop | ||
57 | |||
58 | .align 5 | ||
59 | .set reorder | ||
60 | ll_compare_irq: | ||
61 | li a0,7 | ||
62 | move a1,sp | ||
63 | jal do_IRQ | ||
64 | nop | ||
65 | j ret_from_irq | ||
66 | nop | ||
67 | |||
68 | .align 5 | ||
69 | .set reorder | ||
70 | ll_pci_intA: | ||
71 | move a0,sp | ||
72 | jal pci_intA | ||
73 | nop | ||
74 | j ret_from_irq | ||
75 | nop | ||
76 | |||
77 | #if 0 | ||
78 | .align 5 | ||
79 | .set reorder | ||
80 | ll_pci_intB: | ||
81 | move a0,sp | ||
82 | jal pci_intB | ||
83 | nop | ||
84 | j ret_from_irq | ||
85 | nop | ||
86 | |||
87 | .align 5 | ||
88 | .set reorder | ||
89 | ll_pci_intC: | ||
90 | move a0,sp | ||
91 | jal pci_intC | ||
92 | nop | ||
93 | j ret_from_irq | ||
94 | nop | ||
95 | #endif | ||
96 | |||
97 | .align 5 | ||
98 | .set reorder | ||
99 | ll_pci_intD: | ||
100 | move a0,sp | ||
101 | jal pci_intD | ||
102 | nop | ||
103 | j ret_from_irq | ||
104 | nop | ||
105 | |||
106 | .align 5 | ||
107 | .set reorder | ||
108 | ll_serial_irq: | ||
109 | li a0,6 | ||
110 | move a1,sp | ||
111 | jal do_IRQ | ||
112 | nop | ||
113 | j ret_from_irq | ||
114 | nop | ||
diff --git a/arch/mips/gt64120/ev64120/irq.c b/arch/mips/gt64120/ev64120/irq.c index 3b186159b21a..46c468b26b30 100644 --- a/arch/mips/gt64120/ev64120/irq.c +++ b/arch/mips/gt64120/ev64120/irq.c | |||
@@ -46,14 +46,22 @@ | |||
46 | #include <asm/system.h> | 46 | #include <asm/system.h> |
47 | #include <asm/gt64120.h> | 47 | #include <asm/gt64120.h> |
48 | 48 | ||
49 | asmlinkage inline void pci_intA(struct pt_regs *regs) | 49 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) |
50 | { | 50 | { |
51 | do_IRQ(GT_INTA, regs); | 51 | unsigned int pending = read_c0_status() & read_c0_cause(); |
52 | } | 52 | |
53 | 53 | if (pending & STATUSF_IP4) /* int2 hardware line (timer) */ | |
54 | asmlinkage inline void pci_intD(struct pt_regs *regs) | 54 | do_IRQ(4, regs); |
55 | { | 55 | else if (pending & STATUSF_IP2) /* int0 hardware line */ |
56 | do_IRQ(GT_INTD, regs); | 56 | do_IRQ(GT_INTA, regs); |
57 | else if (pending & STATUSF_IP5) /* int3 hardware line */ | ||
58 | do_IRQ(GT_INTD, regs); | ||
59 | else if (pending & STATUSF_IP6) /* int4 hardware line */ | ||
60 | do_IRQ(6, regs); | ||
61 | else if (pending & STATUSF_IP7) /* compare int */ | ||
62 | do_IRQ(7, regs); | ||
63 | else | ||
64 | spurious_interrupt(regs); | ||
57 | } | 65 | } |
58 | 66 | ||
59 | static void disable_ev64120_irq(unsigned int irq_nr) | 67 | static void disable_ev64120_irq(unsigned int irq_nr) |
@@ -109,16 +117,11 @@ static struct hw_interrupt_type ev64120_irq_type = { | |||
109 | 117 | ||
110 | void gt64120_irq_setup(void) | 118 | void gt64120_irq_setup(void) |
111 | { | 119 | { |
112 | extern asmlinkage void galileo_handle_int(void); | ||
113 | |||
114 | /* | 120 | /* |
115 | * Clear all of the interrupts while we change the able around a bit. | 121 | * Clear all of the interrupts while we change the able around a bit. |
116 | */ | 122 | */ |
117 | clear_c0_status(ST0_IM); | 123 | clear_c0_status(ST0_IM); |
118 | 124 | ||
119 | /* Sets the exception_handler array. */ | ||
120 | set_except_vector(0, galileo_handle_int); | ||
121 | |||
122 | local_irq_disable(); | 125 | local_irq_disable(); |
123 | 126 | ||
124 | /* | 127 | /* |
diff --git a/arch/mips/gt64120/momenco_ocelot/Makefile b/arch/mips/gt64120/momenco_ocelot/Makefile index 7b59c6567c79..6f708df8373b 100644 --- a/arch/mips/gt64120/momenco_ocelot/Makefile +++ b/arch/mips/gt64120/momenco_ocelot/Makefile | |||
@@ -2,7 +2,7 @@ | |||
2 | # Makefile for Momentum's Ocelot board. | 2 | # Makefile for Momentum's Ocelot board. |
3 | # | 3 | # |
4 | 4 | ||
5 | obj-y += int-handler.o irq.o prom.o reset.o setup.o | 5 | obj-y += irq.o prom.o reset.o setup.o |
6 | 6 | ||
7 | obj-$(CONFIG_KGDB) += dbg_io.o | 7 | obj-$(CONFIG_KGDB) += dbg_io.o |
8 | 8 | ||
diff --git a/arch/mips/gt64120/momenco_ocelot/int-handler.S b/arch/mips/gt64120/momenco_ocelot/int-handler.S deleted file mode 100644 index 808acef248cc..000000000000 --- a/arch/mips/gt64120/momenco_ocelot/int-handler.S +++ /dev/null | |||
@@ -1,131 +0,0 @@ | |||
1 | /* | ||
2 | * Copyright 2001 MontaVista Software Inc. | ||
3 | * Author: jsun@mvista.com or jsun@junsun.net | ||
4 | * | ||
5 | * First-level interrupt dispatcher for ocelot board. | ||
6 | * | ||
7 | * This program is free software; you can redistribute it and/or modify it | ||
8 | * under the terms of the GNU General Public License as published by the | ||
9 | * Free Software Foundation; either version 2 of the License, or (at your | ||
10 | * option) any later version. | ||
11 | */ | ||
12 | #include <asm/asm.h> | ||
13 | #include <asm/mipsregs.h> | ||
14 | #include <asm/addrspace.h> | ||
15 | #include <asm/regdef.h> | ||
16 | #include <asm/stackframe.h> | ||
17 | |||
18 | /* | ||
19 | * first level interrupt dispatcher for ocelot board - | ||
20 | * We check for the timer first, then check PCI ints A and D. | ||
21 | * Then check for serial IRQ and fall through. | ||
22 | */ | ||
23 | .align 5 | ||
24 | NESTED(ocelot_handle_int, PT_SIZE, sp) | ||
25 | SAVE_ALL | ||
26 | CLI | ||
27 | .set at | ||
28 | mfc0 t0, CP0_CAUSE | ||
29 | mfc0 t2, CP0_STATUS | ||
30 | |||
31 | and t0, t2 | ||
32 | |||
33 | andi t1, t0, STATUSF_IP2 /* int0 hardware line */ | ||
34 | bnez t1, ll_pri_enet_irq | ||
35 | andi t1, t0, STATUSF_IP3 /* int1 hardware line */ | ||
36 | bnez t1, ll_sec_enet_irq | ||
37 | andi t1, t0, STATUSF_IP4 /* int2 hardware line */ | ||
38 | bnez t1, ll_uart1_irq | ||
39 | andi t1, t0, STATUSF_IP5 /* int3 hardware line */ | ||
40 | bnez t1, ll_cpci_irq | ||
41 | andi t1, t0, STATUSF_IP6 /* int4 hardware line */ | ||
42 | bnez t1, ll_galileo_irq | ||
43 | andi t1, t0, STATUSF_IP7 /* cpu timer */ | ||
44 | bnez t1, ll_cputimer_irq | ||
45 | |||
46 | /* now look at the extended interrupts */ | ||
47 | mfc0 t0, CP0_CAUSE | ||
48 | cfc0 t1, CP0_S1_INTCONTROL | ||
49 | |||
50 | /* shift the mask 8 bits left to line up the bits */ | ||
51 | sll t2, t1, 8 | ||
52 | |||
53 | and t0, t2 | ||
54 | srl t0, t0, 16 | ||
55 | |||
56 | andi t1, t0, STATUSF_IP8 /* int6 hardware line */ | ||
57 | bnez t1, ll_pmc1_irq | ||
58 | andi t1, t0, STATUSF_IP9 /* int7 hardware line */ | ||
59 | bnez t1, ll_pmc2_irq | ||
60 | andi t1, t0, STATUSF_IP10 /* int8 hardware line */ | ||
61 | bnez t1, ll_cpci_abcd_irq | ||
62 | andi t1, t0, STATUSF_IP11 /* int9 hardware line */ | ||
63 | bnez t1, ll_uart2_irq | ||
64 | |||
65 | .set reorder | ||
66 | |||
67 | /* wrong alarm or masked ... */ | ||
68 | j spurious_interrupt | ||
69 | nop | ||
70 | END(ocelot_handle_int) | ||
71 | |||
72 | .align 5 | ||
73 | ll_pri_enet_irq: | ||
74 | li a0, 2 | ||
75 | move a1, sp | ||
76 | jal do_IRQ | ||
77 | j ret_from_irq | ||
78 | |||
79 | ll_sec_enet_irq: | ||
80 | li a0, 3 | ||
81 | move a1, sp | ||
82 | jal do_IRQ | ||
83 | j ret_from_irq | ||
84 | |||
85 | ll_uart1_irq: | ||
86 | li a0, 4 | ||
87 | move a1, sp | ||
88 | jal do_IRQ | ||
89 | j ret_from_irq | ||
90 | |||
91 | ll_cpci_irq: | ||
92 | li a0, 5 | ||
93 | move a1, sp | ||
94 | jal do_IRQ | ||
95 | j ret_from_irq | ||
96 | |||
97 | ll_galileo_irq: | ||
98 | li a0, 6 | ||
99 | move a1, sp | ||
100 | jal do_IRQ | ||
101 | j ret_from_irq | ||
102 | |||
103 | ll_cputimer_irq: | ||
104 | li a0, 7 | ||
105 | move a1, sp | ||
106 | jal do_IRQ | ||
107 | j ret_from_irq | ||
108 | |||
109 | ll_pmc1_irq: | ||
110 | li a0, 8 | ||
111 | move a1, sp | ||
112 | jal do_IRQ | ||
113 | j ret_from_irq | ||
114 | |||
115 | ll_pmc2_irq: | ||
116 | li a0, 9 | ||
117 | move a1, sp | ||
118 | jal do_IRQ | ||
119 | j ret_from_irq | ||
120 | |||
121 | ll_cpci_abcd_irq: | ||
122 | li a0, 10 | ||
123 | move a1, sp | ||
124 | jal do_IRQ | ||
125 | j ret_from_irq | ||
126 | |||
127 | ll_uart2_irq: | ||
128 | li a0, 11 | ||
129 | move a1, sp | ||
130 | jal do_IRQ | ||
131 | j ret_from_irq | ||
diff --git a/arch/mips/gt64120/momenco_ocelot/irq.c b/arch/mips/gt64120/momenco_ocelot/irq.c index 4f108da71b23..885f67f32ea3 100644 --- a/arch/mips/gt64120/momenco_ocelot/irq.c +++ b/arch/mips/gt64120/momenco_ocelot/irq.c | |||
@@ -48,7 +48,38 @@ | |||
48 | #include <asm/mipsregs.h> | 48 | #include <asm/mipsregs.h> |
49 | #include <asm/system.h> | 49 | #include <asm/system.h> |
50 | 50 | ||
51 | extern asmlinkage void ocelot_handle_int(void); | 51 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) |
52 | { | ||
53 | unsigned int pending = read_c0_status() & read_c0_cause(); | ||
54 | |||
55 | if (pending & STATUSF_IP2) /* int0 hardware line */ | ||
56 | do_IRQ(2, regs); | ||
57 | else if (pending & STATUSF_IP3) /* int1 hardware line */ | ||
58 | do_IRQ(3, regs); | ||
59 | else if (pending & STATUSF_IP4) /* int2 hardware line */ | ||
60 | do_IRQ(4, regs); | ||
61 | else if (pending & STATUSF_IP5) /* int3 hardware line */ | ||
62 | do_IRQ(5, regs); | ||
63 | else if (pending & STATUSF_IP6) /* int4 hardware line */ | ||
64 | do_IRQ(6, regs); | ||
65 | else if (pending & STATUSF_IP7) /* cpu timer */ | ||
66 | do_IRQ(7, regs); | ||
67 | else { | ||
68 | /* | ||
69 | * Now look at the extended interrupts | ||
70 | */ | ||
71 | pending = (read_c0_cause() & (read_c0_intcontrol() << 8)) >> 16; | ||
72 | |||
73 | if (pending & STATUSF_IP8) /* int6 hardware line */ | ||
74 | do_IRQ(8, regs); | ||
75 | else if (pending & STATUSF_IP9) /* int7 hardware line */ | ||
76 | do_IRQ(9, regs); | ||
77 | else if (pending & STATUSF_IP10) /* int8 hardware line */ | ||
78 | do_IRQ(10, regs); | ||
79 | else if (pending & STATUSF_IP11) /* int9 hardware line */ | ||
80 | do_IRQ(11, regs); | ||
81 | } | ||
82 | } | ||
52 | 83 | ||
53 | void __init arch_init_irq(void) | 84 | void __init arch_init_irq(void) |
54 | { | 85 | { |
@@ -59,9 +90,6 @@ void __init arch_init_irq(void) | |||
59 | clear_c0_status(ST0_IM); | 90 | clear_c0_status(ST0_IM); |
60 | local_irq_disable(); | 91 | local_irq_disable(); |
61 | 92 | ||
62 | /* Sets the first-level interrupt dispatcher. */ | ||
63 | set_except_vector(0, ocelot_handle_int); | ||
64 | |||
65 | mips_cpu_irq_init(0); | 93 | mips_cpu_irq_init(0); |
66 | rm7k_cpu_irq_init(8); | 94 | rm7k_cpu_irq_init(8); |
67 | } | 95 | } |
diff --git a/arch/mips/ite-boards/generic/Makefile b/arch/mips/ite-boards/generic/Makefile index 0e7853f43983..63431538d0ec 100644 --- a/arch/mips/ite-boards/generic/Makefile +++ b/arch/mips/ite-boards/generic/Makefile | |||
@@ -6,7 +6,7 @@ | |||
6 | # Makefile for the ITE 8172 (qed-4n-s01b) board, generic files. | 6 | # Makefile for the ITE 8172 (qed-4n-s01b) board, generic files. |
7 | # | 7 | # |
8 | 8 | ||
9 | obj-y += it8172_setup.o irq.o int-handler.o pmon_prom.o \ | 9 | obj-y += it8172_setup.o irq.o pmon_prom.o \ |
10 | time.o lpc.o puts.o reset.o | 10 | time.o lpc.o puts.o reset.o |
11 | 11 | ||
12 | obj-$(CONFIG_IT8172_CIR)+= it8172_cir.o | 12 | obj-$(CONFIG_IT8172_CIR)+= it8172_cir.o |
diff --git a/arch/mips/ite-boards/generic/int-handler.S b/arch/mips/ite-boards/generic/int-handler.S deleted file mode 100644 index d190d8add9cb..000000000000 --- a/arch/mips/ite-boards/generic/int-handler.S +++ /dev/null | |||
@@ -1,63 +0,0 @@ | |||
1 | #include <asm/asm.h> | ||
2 | #include <asm/mipsregs.h> | ||
3 | #include <asm/regdef.h> | ||
4 | #include <asm/stackframe.h> | ||
5 | |||
6 | .text | ||
7 | .set macro | ||
8 | .set noat | ||
9 | .align 5 | ||
10 | |||
11 | NESTED(it8172_IRQ, PT_SIZE, sp) | ||
12 | SAVE_ALL | ||
13 | CLI # Important: mark KERNEL mode ! | ||
14 | |||
15 | /* We're working with 'reorder' set at this point. */ | ||
16 | /* | ||
17 | * Get pending interrupts | ||
18 | */ | ||
19 | |||
20 | mfc0 t0,CP0_CAUSE # get pending interrupts | ||
21 | mfc0 t1,CP0_STATUS # get enabled interrupts | ||
22 | and t0,t1 # isolate allowed ones | ||
23 | |||
24 | andi t0,0xff00 # isolate pending bits | ||
25 | beqz t0, 3f # spurious interrupt | ||
26 | |||
27 | andi a0, t0, CAUSEF_IP7 | ||
28 | beq a0, zero, 1f | ||
29 | |||
30 | li a0, 127 # MIPS_CPU_TIMER_IRQ = (NR_IRQS-1) | ||
31 | move a1, sp | ||
32 | jal ll_timer_interrupt | ||
33 | j ret_from_irq | ||
34 | nop | ||
35 | |||
36 | 1: | ||
37 | andi a0, t0, CAUSEF_IP2 # the only int we expect at this time | ||
38 | beq a0, zero, 3f | ||
39 | move a0,sp | ||
40 | jal it8172_hw0_irqdispatch | ||
41 | |||
42 | mfc0 t0,CP0_STATUS # disable interrupts | ||
43 | ori t0,1 | ||
44 | xori t0,1 | ||
45 | mtc0 t0,CP0_STATUS | ||
46 | nop | ||
47 | nop | ||
48 | nop | ||
49 | |||
50 | la a1, ret_from_irq | ||
51 | jr a1 | ||
52 | nop | ||
53 | |||
54 | 3: | ||
55 | move a0, sp | ||
56 | jal mips_spurious_interrupt | ||
57 | nop | ||
58 | la a1, ret_from_irq | ||
59 | jr a1 | ||
60 | nop | ||
61 | |||
62 | END(it8172_IRQ) | ||
63 | |||
diff --git a/arch/mips/ite-boards/generic/irq.c b/arch/mips/ite-boards/generic/irq.c index 8c1cdfcd4284..77be7216bdd0 100644 --- a/arch/mips/ite-boards/generic/irq.c +++ b/arch/mips/ite-boards/generic/irq.c | |||
@@ -64,7 +64,6 @@ | |||
64 | 64 | ||
65 | extern void set_debug_traps(void); | 65 | extern void set_debug_traps(void); |
66 | extern void mips_timer_interrupt(int irq, struct pt_regs *regs); | 66 | extern void mips_timer_interrupt(int irq, struct pt_regs *regs); |
67 | extern asmlinkage void it8172_IRQ(void); | ||
68 | 67 | ||
69 | struct it8172_intc_regs volatile *it8172_hw0_icregs = | 68 | struct it8172_intc_regs volatile *it8172_hw0_icregs = |
70 | (struct it8172_intc_regs volatile *)(KSEG1ADDR(IT8172_PCI_IO_BASE + IT_INTC_BASE)); | 69 | (struct it8172_intc_regs volatile *)(KSEG1ADDR(IT8172_PCI_IO_BASE + IT_INTC_BASE)); |
@@ -178,8 +177,6 @@ void __init arch_init_irq(void) | |||
178 | int i; | 177 | int i; |
179 | unsigned long flags; | 178 | unsigned long flags; |
180 | 179 | ||
181 | set_except_vector(0, it8172_IRQ); | ||
182 | |||
183 | /* mask all interrupts */ | 180 | /* mask all interrupts */ |
184 | it8172_hw0_icregs->lb_mask = 0xffff; | 181 | it8172_hw0_icregs->lb_mask = 0xffff; |
185 | it8172_hw0_icregs->lpc_mask = 0xffff; | 182 | it8172_hw0_icregs->lpc_mask = 0xffff; |
@@ -279,6 +276,18 @@ void it8172_hw0_irqdispatch(struct pt_regs *regs) | |||
279 | do_IRQ(irq, regs); | 276 | do_IRQ(irq, regs); |
280 | } | 277 | } |
281 | 278 | ||
279 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) | ||
280 | { | ||
281 | unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; | ||
282 | |||
283 | if (!pending) | ||
284 | mips_spurious_interrupt(regs); | ||
285 | else if (pending & CAUSEF_IP7) | ||
286 | ll_timer_interrupt(127, regs); | ||
287 | else if (pending & CAUSEF_IP2) | ||
288 | it8172_hw0_irqdispatch(regs); | ||
289 | } | ||
290 | |||
282 | void show_pending_irqs(void) | 291 | void show_pending_irqs(void) |
283 | { | 292 | { |
284 | fputs("intstatus: "); | 293 | fputs("intstatus: "); |
diff --git a/arch/mips/jazz/Makefile b/arch/mips/jazz/Makefile index 85749246a671..02bd39add891 100644 --- a/arch/mips/jazz/Makefile +++ b/arch/mips/jazz/Makefile | |||
@@ -2,6 +2,6 @@ | |||
2 | # Makefile for the Jazz family specific parts of the kernel | 2 | # Makefile for the Jazz family specific parts of the kernel |
3 | # | 3 | # |
4 | 4 | ||
5 | obj-y := int-handler.o irq.o jazzdma.o reset.o setup.o | 5 | obj-y := irq.o jazzdma.o reset.o setup.o |
6 | 6 | ||
7 | EXTRA_AFLAGS := $(CFLAGS) | 7 | EXTRA_AFLAGS := $(CFLAGS) |
diff --git a/arch/mips/jazz/int-handler.S b/arch/mips/jazz/int-handler.S deleted file mode 100644 index e35f5fcd3f90..000000000000 --- a/arch/mips/jazz/int-handler.S +++ /dev/null | |||
@@ -1,283 +0,0 @@ | |||
1 | /* | ||
2 | * This file is subject to the terms and conditions of the GNU General Public | ||
3 | * License. See the file "COPYING" in the main directory of this archive | ||
4 | * for more details. | ||
5 | * | ||
6 | * Copyright (C) 1995, 1996, 1997, 1998 by Ralf Baechle and Andreas Busse | ||
7 | * | ||
8 | * Jazz family specific interrupt stuff | ||
9 | * | ||
10 | * To do: On Jazz machines we remap some non-ISA interrupts to ISA | ||
11 | * interrupts. These interrupts should use their own vectors. | ||
12 | * Squeeze the last cycles out of the handlers. Only a dead | ||
13 | * cycle is a good cycle. | ||
14 | */ | ||
15 | #include <asm/asm.h> | ||
16 | #include <asm/mipsregs.h> | ||
17 | #include <asm/jazz.h> | ||
18 | #include <asm/regdef.h> | ||
19 | #include <asm/stackframe.h> | ||
20 | |||
21 | /* | ||
22 | * jazz_handle_int: Interrupt handler for the ACER Pica-61 boards | ||
23 | */ | ||
24 | .set noreorder | ||
25 | |||
26 | NESTED(jazz_handle_int, PT_SIZE, ra) | ||
27 | .set noat | ||
28 | SAVE_ALL | ||
29 | CLI | ||
30 | .set at | ||
31 | |||
32 | /* | ||
33 | * Get pending interrupts | ||
34 | */ | ||
35 | mfc0 t0,CP0_CAUSE # get pending interrupts | ||
36 | mfc0 t1,CP0_STATUS # get enabled interrupts | ||
37 | and t0,t1 # isolate allowed ones | ||
38 | andi t0,0xff00 # isolate pending bits | ||
39 | beqz t0,3f | ||
40 | sll t0,16 # delay slot | ||
41 | |||
42 | /* | ||
43 | * Find irq with highest priority | ||
44 | * FIXME: This is slow - use binary search | ||
45 | */ | ||
46 | la t1,ll_vectors | ||
47 | 1: bltz t0,2f # found pending irq | ||
48 | sll t0,1 | ||
49 | b 1b | ||
50 | subu t1,PTRSIZE # delay slot | ||
51 | |||
52 | /* | ||
53 | * Do the low-level stuff | ||
54 | */ | ||
55 | 2: lw t0,(t1) | ||
56 | jr t0 | ||
57 | nop # delay slot | ||
58 | END(jazz_handle_int) | ||
59 | |||
60 | ll_sw0: li s1,~IE_SW0 | ||
61 | mfc0 t0,CP0_CAUSE | ||
62 | and t0,s1 | ||
63 | mtc0 t0,CP0_CAUSE | ||
64 | PANIC("Unimplemented sw0 handler") | ||
65 | |||
66 | ll_sw1: li s1,~IE_SW1 | ||
67 | mfc0 t0,CP0_CAUSE | ||
68 | and t0,s1 | ||
69 | mtc0 t0,CP0_CAUSE | ||
70 | PANIC("Unimplemented sw1 handler") | ||
71 | |||
72 | ll_local_dma: li s1,~IE_IRQ0 | ||
73 | PANIC("Unimplemented local_dma handler") | ||
74 | |||
75 | ll_local_dev: lbu t0,JAZZ_IO_IRQ_SOURCE | ||
76 | #if PTRSIZE == 8 /* True 64 bit kernel */ | ||
77 | dsll t0,1 | ||
78 | #endif | ||
79 | .set reorder | ||
80 | LONG_L t0,local_vector(t0) | ||
81 | jr t0 | ||
82 | .set noreorder | ||
83 | |||
84 | /* | ||
85 | * The braindead PICA hardware gives us no way to distinguish if we really | ||
86 | * received interrupt 7 from the (E)ISA bus or if we just received an | ||
87 | * interrupt with no findable cause. This sometimes happens with braindead | ||
88 | * cards. Oh well - for all the Jazz boxes slots are more or less just | ||
89 | * whistles and bells and we're aware of the problem. | ||
90 | */ | ||
91 | ll_isa_irq: lw a0, JAZZ_EISA_IRQ_ACK | ||
92 | |||
93 | jal do_IRQ | ||
94 | move a1,sp | ||
95 | |||
96 | j ret_from_irq | ||
97 | nop | ||
98 | |||
99 | /* | ||
100 | * Hmm... This is not just a plain PC clone so the question is | ||
101 | * which devices on Jazz machines can generate an (E)ISA NMI? | ||
102 | * (Writing to nonexistent memory?) | ||
103 | */ | ||
104 | ll_isa_nmi: li s1,~IE_IRQ3 | ||
105 | PANIC("Unimplemented isa_nmi handler") | ||
106 | |||
107 | /* | ||
108 | * Timer IRQ - remapped to be more similar to an IBM compatible. | ||
109 | * | ||
110 | * The timer interrupt is handled specially to ensure that the jiffies | ||
111 | * variable is updated at all times. Specifically, the timer interrupt is | ||
112 | * just like the complete handlers except that it is invoked with interrupts | ||
113 | * disabled and should never re-enable them. If other interrupts were | ||
114 | * allowed to be processed while the timer interrupt is active, then the | ||
115 | * other interrupts would have to avoid using the jiffies variable for delay | ||
116 | * and interval timing operations to avoid hanging the system. | ||
117 | */ | ||
118 | ll_timer: lw zero,JAZZ_TIMER_REGISTER # timer irq cleared on read | ||
119 | li s1,~IE_IRQ4 | ||
120 | |||
121 | li a0, JAZZ_TIMER_IRQ | ||
122 | jal do_IRQ | ||
123 | move a1,sp | ||
124 | |||
125 | mfc0 t0,CP0_STATUS # disable interrupts again | ||
126 | ori t0,1 | ||
127 | xori t0,1 | ||
128 | mtc0 t0,CP0_STATUS | ||
129 | |||
130 | j ret_from_irq | ||
131 | nop | ||
132 | |||
133 | /* | ||
134 | * CPU count/compare IRQ (unused) | ||
135 | */ | ||
136 | ll_count: j ret_from_irq | ||
137 | mtc0 zero,CP0_COMPARE | ||
138 | |||
139 | #if 0 | ||
140 | /* | ||
141 | * Call the handler for the interrupt | ||
142 | * (Currently unused) | ||
143 | */ | ||
144 | call_real: /* | ||
145 | * temporarily disable interrupt | ||
146 | */ | ||
147 | mfc0 t2,CP0_STATUS | ||
148 | and t2,s1 | ||
149 | mtc0 t2,CP0_STATUS | ||
150 | nor s1,zero,s1 | ||
151 | jal do_IRQ | ||
152 | |||
153 | /* | ||
154 | * reenable interrupt | ||
155 | */ | ||
156 | mfc0 t2,CP0_STATUS | ||
157 | or t2,s1 | ||
158 | mtc0 t2,CP0_STATUS | ||
159 | j ret_from_irq | ||
160 | #endif | ||
161 | |||
162 | .data | ||
163 | PTR ll_sw0 # SW0 | ||
164 | PTR ll_sw1 # SW1 | ||
165 | PTR ll_local_dma # Local DMA | ||
166 | PTR ll_local_dev # Local devices | ||
167 | PTR ll_isa_irq # ISA IRQ | ||
168 | PTR ll_isa_nmi # ISA NMI | ||
169 | PTR ll_timer # Timer | ||
170 | ll_vectors: PTR ll_count # Count/Compare IRQ | ||
171 | |||
172 | /* | ||
173 | * Interrupt handlers for local devices. | ||
174 | */ | ||
175 | .text | ||
176 | .set reorder | ||
177 | loc_no_irq: PANIC("Unimplemented loc_no_irq handler") | ||
178 | /* | ||
179 | * Parallel port IRQ | ||
180 | */ | ||
181 | loc_parallel: li s1,~JAZZ_IE_PARALLEL | ||
182 | li a0,JAZZ_PARALLEL_IRQ | ||
183 | b loc_call | ||
184 | |||
185 | /* | ||
186 | * Floppy IRQ | ||
187 | */ | ||
188 | loc_floppy: li s1,~JAZZ_IE_FLOPPY | ||
189 | li a0,JAZZ_FLOPPY_IRQ | ||
190 | b loc_call | ||
191 | |||
192 | /* | ||
193 | * Sound IRQ | ||
194 | */ | ||
195 | loc_sound: PANIC("Unimplemented loc_sound handler") | ||
196 | loc_video: PANIC("Unimplemented loc_video handler") | ||
197 | |||
198 | /* | ||
199 | * Ethernet interrupt handler | ||
200 | */ | ||
201 | loc_ethernet: li s1,~JAZZ_IE_ETHERNET | ||
202 | li a0,JAZZ_ETHERNET_IRQ | ||
203 | b loc_call | ||
204 | |||
205 | /* | ||
206 | * SCSI interrupt handler | ||
207 | */ | ||
208 | loc_scsi: li s1,~JAZZ_IE_SCSI | ||
209 | li a0,JAZZ_SCSI_IRQ | ||
210 | b loc_call | ||
211 | |||
212 | /* | ||
213 | * Keyboard interrupt handler | ||
214 | */ | ||
215 | loc_keyboard: li s1,~JAZZ_IE_KEYBOARD | ||
216 | li a0,JAZZ_KEYBOARD_IRQ | ||
217 | b loc_call | ||
218 | |||
219 | /* | ||
220 | * Mouse interrupt handler | ||
221 | */ | ||
222 | loc_mouse: li s1,~JAZZ_IE_MOUSE | ||
223 | li a0,JAZZ_MOUSE_IRQ | ||
224 | b loc_call | ||
225 | |||
226 | /* | ||
227 | * Serial port 1 IRQ | ||
228 | */ | ||
229 | loc_serial1: li s1,~JAZZ_IE_SERIAL1 | ||
230 | li a0,JAZZ_SERIAL1_IRQ | ||
231 | b loc_call | ||
232 | |||
233 | /* | ||
234 | * Serial port 2 IRQ | ||
235 | */ | ||
236 | loc_serial2: li s1,~JAZZ_IE_SERIAL2 | ||
237 | li a0,JAZZ_SERIAL2_IRQ | ||
238 | b loc_call | ||
239 | |||
240 | /* | ||
241 | * Call the interrupt handler for an interrupt generated by a | ||
242 | * local device. | ||
243 | */ | ||
244 | loc_call: /* | ||
245 | * Temporarily disable interrupt source | ||
246 | */ | ||
247 | lhu t2,JAZZ_IO_IRQ_ENABLE | ||
248 | and t2,s1 | ||
249 | sh t2,JAZZ_IO_IRQ_ENABLE | ||
250 | |||
251 | nor s1,zero,s1 | ||
252 | jal do_IRQ | ||
253 | |||
254 | /* | ||
255 | * Reenable interrupt | ||
256 | */ | ||
257 | lhu t2,JAZZ_IO_IRQ_ENABLE | ||
258 | or t2,s1 | ||
259 | sh t2,JAZZ_IO_IRQ_ENABLE | ||
260 | |||
261 | j ret_from_irq | ||
262 | |||
263 | /* | ||
264 | * "Jump extender" to reach spurious_interrupt | ||
265 | */ | ||
266 | 3: jal spurious_interrupt | ||
267 | j ret_from_irq | ||
268 | |||
269 | /* | ||
270 | * Vectors for interrupts generated by local devices | ||
271 | */ | ||
272 | .data | ||
273 | local_vector: PTR loc_no_irq | ||
274 | PTR loc_parallel | ||
275 | PTR loc_floppy | ||
276 | PTR loc_sound | ||
277 | PTR loc_video | ||
278 | PTR loc_ethernet | ||
279 | PTR loc_scsi | ||
280 | PTR loc_keyboard | ||
281 | PTR loc_mouse | ||
282 | PTR loc_serial1 | ||
283 | PTR loc_serial2 | ||
diff --git a/arch/mips/jazz/irq.c b/arch/mips/jazz/irq.c index b309b1bcf2e8..becc9accd495 100644 --- a/arch/mips/jazz/irq.c +++ b/arch/mips/jazz/irq.c | |||
@@ -15,8 +15,6 @@ | |||
15 | #include <asm/io.h> | 15 | #include <asm/io.h> |
16 | #include <asm/jazz.h> | 16 | #include <asm/jazz.h> |
17 | 17 | ||
18 | extern asmlinkage void jazz_handle_int(void); | ||
19 | |||
20 | static DEFINE_SPINLOCK(r4030_lock); | 18 | static DEFINE_SPINLOCK(r4030_lock); |
21 | 19 | ||
22 | static void enable_r4030_irq(unsigned int irq) | 20 | static void enable_r4030_irq(unsigned int irq) |
@@ -90,10 +88,82 @@ void __init init_r4030_ints(void) | |||
90 | */ | 88 | */ |
91 | void __init arch_init_irq(void) | 89 | void __init arch_init_irq(void) |
92 | { | 90 | { |
93 | set_except_vector(0, jazz_handle_int); | ||
94 | |||
95 | init_i8259_irqs(); /* Integrated i8259 */ | 91 | init_i8259_irqs(); /* Integrated i8259 */ |
96 | init_r4030_ints(); | 92 | init_r4030_ints(); |
97 | 93 | ||
98 | change_c0_status(ST0_IM, IE_IRQ4 | IE_IRQ3 | IE_IRQ2 | IE_IRQ1); | 94 | change_c0_status(ST0_IM, IE_IRQ4 | IE_IRQ3 | IE_IRQ2 | IE_IRQ1); |
99 | } | 95 | } |
96 | |||
97 | static void loc_call(unsigned int irq, struct pt_regs *regs, unsigned int mask) | ||
98 | { | ||
99 | r4030_write_reg16(JAZZ_IO_IRQ_ENABLE, | ||
100 | r4030_read_reg16(JAZZ_IO_IRQ_ENABLE) & mask); | ||
101 | do_IRQ(irq, regs); | ||
102 | r4030_write_reg16(JAZZ_IO_IRQ_ENABLE, | ||
103 | r4030_read_reg16(JAZZ_IO_IRQ_ENABLE) | mask); | ||
104 | } | ||
105 | |||
106 | static void ll_local_dev(struct pt_regs *regs) | ||
107 | { | ||
108 | switch (r4030_read_reg32(JAZZ_IO_IRQ_SOURCE)) { | ||
109 | case 0: | ||
110 | panic("Unimplemented loc_no_irq handler"); | ||
111 | break; | ||
112 | case 4: | ||
113 | loc_call(JAZZ_PARALLEL_IRQ, regs, JAZZ_IE_PARALLEL); | ||
114 | break; | ||
115 | case 8: | ||
116 | loc_call(JAZZ_PARALLEL_IRQ, regs, JAZZ_IE_FLOPPY); | ||
117 | break; | ||
118 | case 12: | ||
119 | panic("Unimplemented loc_sound handler"); | ||
120 | break; | ||
121 | case 16: | ||
122 | panic("Unimplemented loc_video handler"); | ||
123 | break; | ||
124 | case 20: | ||
125 | loc_call(JAZZ_ETHERNET_IRQ, regs, JAZZ_IE_ETHERNET); | ||
126 | break; | ||
127 | case 24: | ||
128 | loc_call(JAZZ_SCSI_IRQ, regs, JAZZ_IE_SCSI); | ||
129 | break; | ||
130 | case 28: | ||
131 | loc_call(JAZZ_KEYBOARD_IRQ, regs, JAZZ_IE_KEYBOARD); | ||
132 | break; | ||
133 | case 32: | ||
134 | loc_call(JAZZ_MOUSE_IRQ, regs, JAZZ_IE_MOUSE); | ||
135 | break; | ||
136 | case 36: | ||
137 | loc_call(JAZZ_SERIAL1_IRQ, regs, JAZZ_IE_SERIAL1); | ||
138 | break; | ||
139 | case 40: | ||
140 | loc_call(JAZZ_SERIAL2_IRQ, regs, JAZZ_IE_SERIAL2); | ||
141 | break; | ||
142 | } | ||
143 | } | ||
144 | |||
145 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) | ||
146 | { | ||
147 | unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; | ||
148 | |||
149 | if (pending & IE_IRQ5) | ||
150 | write_c0_compare(0); | ||
151 | else if (pending & IE_IRQ4) { | ||
152 | r4030_read_reg32(JAZZ_TIMER_REGISTER); | ||
153 | do_IRQ(JAZZ_TIMER_IRQ, regs); | ||
154 | } else if (pending & IE_IRQ3) | ||
155 | panic("Unimplemented ISA NMI handler"); | ||
156 | else if (pending & IE_IRQ2) | ||
157 | do_IRQ(r4030_read_reg32(JAZZ_EISA_IRQ_ACK), regs); | ||
158 | else if (pending & IE_IRQ1) { | ||
159 | ll_local_dev(regs); | ||
160 | } else if (unlikely(pending & IE_IRQ0)) | ||
161 | panic("Unimplemented local_dma handler"); | ||
162 | else if (pending & IE_SW1) { | ||
163 | clear_c0_cause(IE_SW1); | ||
164 | panic("Unimplemented sw1 handler"); | ||
165 | } else if (pending & IE_SW0) { | ||
166 | clear_c0_cause(IE_SW0); | ||
167 | panic("Unimplemented sw0 handler"); | ||
168 | } | ||
169 | } | ||
diff --git a/arch/mips/jmr3927/rbhma3100/Makefile b/arch/mips/jmr3927/rbhma3100/Makefile index 75bf418b94c0..baf5077813c1 100644 --- a/arch/mips/jmr3927/rbhma3100/Makefile +++ b/arch/mips/jmr3927/rbhma3100/Makefile | |||
@@ -2,7 +2,7 @@ | |||
2 | # Makefile for TOSHIBA JMR-TX3927 board | 2 | # Makefile for TOSHIBA JMR-TX3927 board |
3 | # | 3 | # |
4 | 4 | ||
5 | obj-y += init.o int-handler.o irq.o setup.o | 5 | obj-y += init.o irq.o setup.o |
6 | obj-$(CONFIG_RUNTIME_DEBUG) += debug.o | 6 | obj-$(CONFIG_RUNTIME_DEBUG) += debug.o |
7 | obj-$(CONFIG_KGDB) += kgdb_io.o | 7 | obj-$(CONFIG_KGDB) += kgdb_io.o |
8 | 8 | ||
diff --git a/arch/mips/jmr3927/rbhma3100/int-handler.S b/arch/mips/jmr3927/rbhma3100/int-handler.S deleted file mode 100644 index f85bbf407542..000000000000 --- a/arch/mips/jmr3927/rbhma3100/int-handler.S +++ /dev/null | |||
@@ -1,74 +0,0 @@ | |||
1 | /* | ||
2 | * Copyright 2001 MontaVista Software Inc. | ||
3 | * Author: MontaVista Software, Inc. | ||
4 | * ahennessy@mvista.com | ||
5 | * | ||
6 | * Based on arch/mips/tsdb/kernel/int-handler.S | ||
7 | * | ||
8 | * Copyright (C) 2000-2001 Toshiba Corporation | ||
9 | * | ||
10 | * This program is free software; you can redistribute it and/or modify it | ||
11 | * under the terms of the GNU General Public License as published by the | ||
12 | * Free Software Foundation; either version 2 of the License, or (at your | ||
13 | * option) any later version. | ||
14 | * | ||
15 | * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED | ||
16 | * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | ||
17 | * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN | ||
18 | * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, | ||
19 | * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT | ||
20 | * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF | ||
21 | * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON | ||
22 | * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | ||
23 | * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF | ||
24 | * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | ||
25 | * | ||
26 | * You should have received a copy of the GNU General Public License along | ||
27 | * with this program; if not, write to the Free Software Foundation, Inc., | ||
28 | * 675 Mass Ave, Cambridge, MA 02139, USA. | ||
29 | */ | ||
30 | |||
31 | #include <asm/asm.h> | ||
32 | #include <asm/mipsregs.h> | ||
33 | #include <asm/regdef.h> | ||
34 | #include <asm/stackframe.h> | ||
35 | #include <asm/jmr3927/jmr3927.h> | ||
36 | |||
37 | /* A lot of complication here is taken away because: | ||
38 | * | ||
39 | * 1) We handle one interrupt and return, sitting in a loop | ||
40 | * and moving across all the pending IRQ bits in the cause | ||
41 | * register is _NOT_ the answer, the common case is one | ||
42 | * pending IRQ so optimize in that direction. | ||
43 | * | ||
44 | * 2) We need not check against bits in the status register | ||
45 | * IRQ mask, that would make this routine slow as hell. | ||
46 | * | ||
47 | * 3) Linux only thinks in terms of all IRQs on or all IRQs | ||
48 | * off, nothing in between like BSD spl() brain-damage. | ||
49 | * | ||
50 | */ | ||
51 | |||
52 | /* Flush write buffer (needed?) | ||
53 | * NOTE: TX39xx performs "non-blocking load", so explicitly use the target | ||
54 | * register of LBU to flush immediately. | ||
55 | */ | ||
56 | #define FLUSH_WB(tmp) \ | ||
57 | la tmp, JMR3927_IOC_REV_ADDR; \ | ||
58 | lbu tmp, (tmp); \ | ||
59 | move tmp, zero; | ||
60 | |||
61 | .text | ||
62 | .set noreorder | ||
63 | .set noat | ||
64 | .align 5 | ||
65 | NESTED(jmr3927_IRQ, PT_SIZE, sp) | ||
66 | SAVE_ALL | ||
67 | CLI | ||
68 | .set at | ||
69 | jal jmr3927_irc_irqdispatch | ||
70 | move a0, sp | ||
71 | FLUSH_WB(t0) | ||
72 | j ret_from_irq | ||
73 | nop | ||
74 | END(jmr3927_IRQ) | ||
diff --git a/arch/mips/jmr3927/rbhma3100/irq.c b/arch/mips/jmr3927/rbhma3100/irq.c index 2810727f1d4e..11304d1354f4 100644 --- a/arch/mips/jmr3927/rbhma3100/irq.c +++ b/arch/mips/jmr3927/rbhma3100/irq.c | |||
@@ -77,8 +77,6 @@ static int jmr3927_gen_iack(void) | |||
77 | } | 77 | } |
78 | #endif | 78 | #endif |
79 | 79 | ||
80 | extern asmlinkage void jmr3927_IRQ(void); | ||
81 | |||
82 | #define irc_dlevel 0 | 80 | #define irc_dlevel 0 |
83 | #define irc_elevel 1 | 81 | #define irc_elevel 1 |
84 | 82 | ||
@@ -262,7 +260,7 @@ void jmr3927_spurious(struct pt_regs *regs) | |||
262 | regs->cp0_cause, regs->cp0_epc, regs->regs[31]); | 260 | regs->cp0_cause, regs->cp0_epc, regs->regs[31]); |
263 | } | 261 | } |
264 | 262 | ||
265 | void jmr3927_irc_irqdispatch(struct pt_regs *regs) | 263 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) |
266 | { | 264 | { |
267 | int irq; | 265 | int irq; |
268 | 266 | ||
@@ -398,8 +396,6 @@ void __init arch_init_irq(void) | |||
398 | 396 | ||
399 | jmr3927_irq_init(NR_ISA_IRQS); | 397 | jmr3927_irq_init(NR_ISA_IRQS); |
400 | 398 | ||
401 | set_except_vector(0, jmr3927_IRQ); | ||
402 | |||
403 | /* setup irq space */ | 399 | /* setup irq space */ |
404 | add_tb_irq_space(&jmr3927_isac_irqspace); | 400 | add_tb_irq_space(&jmr3927_isac_irqspace); |
405 | add_tb_irq_space(&jmr3927_ioc_irqspace); | 401 | add_tb_irq_space(&jmr3927_ioc_irqspace); |
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index 13f22d1d0e8b..04418b6568b0 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S | |||
@@ -122,6 +122,20 @@ handle_vcei: | |||
122 | .set pop | 122 | .set pop |
123 | END(except_vec3_r4000) | 123 | END(except_vec3_r4000) |
124 | 124 | ||
125 | __FINIT | ||
126 | |||
127 | .align 5 | ||
128 | NESTED(handle_int, PT_SIZE, sp) | ||
129 | SAVE_ALL | ||
130 | CLI | ||
131 | |||
132 | PTR_LA ra, ret_from_irq | ||
133 | move a0, sp | ||
134 | j plat_irq_dispatch | ||
135 | END(handle_int) | ||
136 | |||
137 | __INIT | ||
138 | |||
125 | /* | 139 | /* |
126 | * Special interrupt vector for MIPS64 ISA & embedded MIPS processors. | 140 | * Special interrupt vector for MIPS64 ISA & embedded MIPS processors. |
127 | * This is a dedicated interrupt exception vector which reduces the | 141 | * This is a dedicated interrupt exception vector which reduces the |
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 857319085255..61efc61c45e2 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c | |||
@@ -42,6 +42,7 @@ | |||
42 | #include <asm/watch.h> | 42 | #include <asm/watch.h> |
43 | #include <asm/types.h> | 43 | #include <asm/types.h> |
44 | 44 | ||
45 | extern asmlinkage void handle_int(void); | ||
45 | extern asmlinkage void handle_tlbm(void); | 46 | extern asmlinkage void handle_tlbm(void); |
46 | extern asmlinkage void handle_tlbl(void); | 47 | extern asmlinkage void handle_tlbl(void); |
47 | extern asmlinkage void handle_tlbs(void); | 48 | extern asmlinkage void handle_tlbs(void); |
@@ -1296,6 +1297,7 @@ void __init trap_init(void) | |||
1296 | if (board_be_init) | 1297 | if (board_be_init) |
1297 | board_be_init(); | 1298 | board_be_init(); |
1298 | 1299 | ||
1300 | set_except_vector(0, handle_int); | ||
1299 | set_except_vector(1, handle_tlbm); | 1301 | set_except_vector(1, handle_tlbm); |
1300 | set_except_vector(2, handle_tlbl); | 1302 | set_except_vector(2, handle_tlbl); |
1301 | set_except_vector(3, handle_tlbs); | 1303 | set_except_vector(3, handle_tlbs); |
diff --git a/arch/mips/lasat/Makefile b/arch/mips/lasat/Makefile index 0d5aec436725..99f5046fdf49 100644 --- a/arch/mips/lasat/Makefile +++ b/arch/mips/lasat/Makefile | |||
@@ -3,7 +3,7 @@ | |||
3 | # | 3 | # |
4 | 4 | ||
5 | obj-y += reset.o setup.o prom.o lasat_board.o \ | 5 | obj-y += reset.o setup.o prom.o lasat_board.o \ |
6 | at93c.o interrupt.o lasatIRQ.o | 6 | at93c.o interrupt.o |
7 | 7 | ||
8 | obj-$(CONFIG_LASAT_SYSCTL) += sysctl.o | 8 | obj-$(CONFIG_LASAT_SYSCTL) += sysctl.o |
9 | obj-$(CONFIG_DS1603) += ds1603.o | 9 | obj-$(CONFIG_DS1603) += ds1603.o |
diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c index 852a41901a5e..2d3472b21ebb 100644 --- a/arch/mips/lasat/interrupt.c +++ b/arch/mips/lasat/interrupt.c | |||
@@ -27,14 +27,13 @@ | |||
27 | #include <asm/bootinfo.h> | 27 | #include <asm/bootinfo.h> |
28 | #include <asm/irq.h> | 28 | #include <asm/irq.h> |
29 | #include <asm/lasat/lasatint.h> | 29 | #include <asm/lasat/lasatint.h> |
30 | #include <asm/time.h> | ||
30 | #include <asm/gdb-stub.h> | 31 | #include <asm/gdb-stub.h> |
31 | 32 | ||
32 | static volatile int *lasat_int_status = NULL; | 33 | static volatile int *lasat_int_status = NULL; |
33 | static volatile int *lasat_int_mask = NULL; | 34 | static volatile int *lasat_int_mask = NULL; |
34 | static volatile int lasat_int_mask_shift; | 35 | static volatile int lasat_int_mask_shift; |
35 | 36 | ||
36 | extern asmlinkage void lasatIRQ(void); | ||
37 | |||
38 | void disable_lasat_irq(unsigned int irq_nr) | 37 | void disable_lasat_irq(unsigned int irq_nr) |
39 | { | 38 | { |
40 | unsigned long flags; | 39 | unsigned long flags; |
@@ -109,11 +108,17 @@ static unsigned long get_int_status_200(void) | |||
109 | return int_status; | 108 | return int_status; |
110 | } | 109 | } |
111 | 110 | ||
112 | void lasat_hw0_irqdispatch(struct pt_regs *regs) | 111 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) |
113 | { | 112 | { |
114 | unsigned long int_status; | 113 | unsigned long int_status; |
114 | unsigned int cause = read_c0_cause(); | ||
115 | int irq; | 115 | int irq; |
116 | 116 | ||
117 | if (cause & CAUSEF_IP7) { /* R4000 count / compare IRQ */ | ||
118 | ll_timer_interrupt(7, regs); | ||
119 | return; | ||
120 | } | ||
121 | |||
117 | int_status = get_int_status(); | 122 | int_status = get_int_status(); |
118 | 123 | ||
119 | /* if int_status == 0, then the interrupt has already been cleared */ | 124 | /* if int_status == 0, then the interrupt has already been cleared */ |
@@ -147,9 +152,6 @@ void __init arch_init_irq(void) | |||
147 | panic("arch_init_irq: mips_machtype incorrect"); | 152 | panic("arch_init_irq: mips_machtype incorrect"); |
148 | } | 153 | } |
149 | 154 | ||
150 | /* Now safe to set the exception vector. */ | ||
151 | set_except_vector(0, lasatIRQ); | ||
152 | |||
153 | for (i = 0; i <= LASATINT_END; i++) { | 155 | for (i = 0; i <= LASATINT_END; i++) { |
154 | irq_desc[i].status = IRQ_DISABLED; | 156 | irq_desc[i].status = IRQ_DISABLED; |
155 | irq_desc[i].action = 0; | 157 | irq_desc[i].action = 0; |
diff --git a/arch/mips/lasat/lasatIRQ.S b/arch/mips/lasat/lasatIRQ.S deleted file mode 100644 index 2a2b0d056561..000000000000 --- a/arch/mips/lasat/lasatIRQ.S +++ /dev/null | |||
@@ -1,69 +0,0 @@ | |||
1 | /* | ||
2 | * Carsten Langgaard, carstenl@mips.com | ||
3 | * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved. | ||
4 | * | ||
5 | * This program is free software; you can distribute it and/or modify it | ||
6 | * under the terms of the GNU General Public License (Version 2) as | ||
7 | * published by the Free Software Foundation. | ||
8 | * | ||
9 | * This program is distributed in the hope it will be useful, but WITHOUT | ||
10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | ||
11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License | ||
12 | * for more details. | ||
13 | * | ||
14 | * You should have received a copy of the GNU General Public License along | ||
15 | * with this program; if not, write to the Free Software Foundation, Inc., | ||
16 | * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. | ||
17 | * | ||
18 | * Interrupt exception dispatch code. | ||
19 | */ | ||
20 | #include <asm/asm.h> | ||
21 | #include <asm/mipsregs.h> | ||
22 | #include <asm/regdef.h> | ||
23 | #include <asm/stackframe.h> | ||
24 | |||
25 | .text | ||
26 | .set noreorder | ||
27 | .align 5 | ||
28 | NESTED(lasatIRQ, PT_SIZE, sp) | ||
29 | .set noat | ||
30 | SAVE_ALL | ||
31 | CLI | ||
32 | .set at | ||
33 | .set noreorder | ||
34 | |||
35 | mfc0 s0, CP0_CAUSE # get irq mask | ||
36 | |||
37 | /* First we check for r4k counter/timer IRQ. */ | ||
38 | andi a0, s0, CAUSEF_IP7 | ||
39 | beq a0, zero, 1f | ||
40 | andi a0, s0, CAUSEF_IP2 # delay slot, check hw0 interrupt | ||
41 | |||
42 | /* Wheee, a timer interrupt. */ | ||
43 | li a0, 7 | ||
44 | jal ll_timer_interrupt | ||
45 | move a1, sp | ||
46 | |||
47 | j ret_from_irq | ||
48 | nop | ||
49 | |||
50 | 1: | ||
51 | /* Wheee, combined hardware level zero interrupt. */ | ||
52 | jal lasat_hw0_irqdispatch | ||
53 | move a0, sp # delay slot | ||
54 | |||
55 | j ret_from_irq | ||
56 | nop # delay slot | ||
57 | |||
58 | 1: | ||
59 | /* | ||
60 | * Here by mistake? This is possible, what can happen is that by the | ||
61 | * time we take the exception the IRQ pin goes low, so just leave if | ||
62 | * this is the case. | ||
63 | */ | ||
64 | move a1,s0 | ||
65 | mfc0 a1, CP0_EPC | ||
66 | |||
67 | j ret_from_irq | ||
68 | nop | ||
69 | END(lasatIRQ) | ||
diff --git a/arch/mips/mips-boards/atlas/Makefile b/arch/mips/mips-boards/atlas/Makefile index 50fec2a5aee6..d8dab75906bf 100644 --- a/arch/mips/mips-boards/atlas/Makefile +++ b/arch/mips/mips-boards/atlas/Makefile | |||
@@ -16,5 +16,5 @@ | |||
16 | # 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. | 16 | # 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. |
17 | # | 17 | # |
18 | 18 | ||
19 | obj-y := atlas_int.o atlas-irq.o atlas_setup.o | 19 | obj-y := atlas_int.o atlas_setup.o |
20 | obj-$(CONFIG_KGDB) += atlas_gdb.o | 20 | obj-$(CONFIG_KGDB) += atlas_gdb.o |
diff --git a/arch/mips/mips-boards/atlas/atlas-irq.S b/arch/mips/mips-boards/atlas/atlas-irq.S deleted file mode 100644 index 31bc99a52383..000000000000 --- a/arch/mips/mips-boards/atlas/atlas-irq.S +++ /dev/null | |||
@@ -1,120 +0,0 @@ | |||
1 | /* | ||
2 | * Carsten Langgaard, carstenl@mips.com | ||
3 | * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved. | ||
4 | * | ||
5 | * This program is free software; you can distribute it and/or modify it | ||
6 | * under the terms of the GNU General Public License (Version 2) as | ||
7 | * published by the Free Software Foundation. | ||
8 | * | ||
9 | * This program is distributed in the hope it will be useful, but WITHOUT | ||
10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | ||
11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License | ||
12 | * for more details. | ||
13 | * | ||
14 | * You should have received a copy of the GNU General Public License along | ||
15 | * with this program; if not, write to the Free Software Foundation, Inc., | ||
16 | * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. | ||
17 | * | ||
18 | * Interrupt exception dispatch code. | ||
19 | */ | ||
20 | #include <linux/config.h> | ||
21 | |||
22 | #include <asm/asm.h> | ||
23 | #include <asm/mipsregs.h> | ||
24 | #include <asm/regdef.h> | ||
25 | #include <asm/stackframe.h> | ||
26 | #include <asm/mips-boards/atlasint.h> | ||
27 | |||
28 | /* | ||
29 | * Furthermore, the IRQs on the MIPS board look basically (barring software | ||
30 | * IRQs which we don't use at all and all external interrupt sources are | ||
31 | * combined together on hardware interrupt 0 (MIPS IRQ 2)) like: | ||
32 | * | ||
33 | * MIPS IRQ Source | ||
34 | * -------- ------ | ||
35 | * 0 Software (ignored) | ||
36 | * 1 Software (ignored) | ||
37 | * 2 Combined hardware interrupt (hw0) | ||
38 | * 3 Hardware (ignored) | ||
39 | * 4 Hardware (ignored) | ||
40 | * 5 Hardware (ignored) | ||
41 | * 6 Hardware (ignored) | ||
42 | * 7 R4k timer (what we use) | ||
43 | * | ||
44 | * Note: On the SEAD board thing are a little bit different. | ||
45 | * Here IRQ 2 (hw0) is wired to the UART0 and IRQ 3 (hw1) is wired | ||
46 | * wired to UART1. | ||
47 | * | ||
48 | * We handle the IRQ according to _our_ priority which is: | ||
49 | * | ||
50 | * Highest ---- R4k Timer | ||
51 | * Lowest ---- Combined hardware interrupt | ||
52 | * | ||
53 | * then we just return, if multiple IRQs are pending then we will just take | ||
54 | * another exception, big deal. | ||
55 | */ | ||
56 | |||
57 | .text | ||
58 | .set noreorder | ||
59 | .set noat | ||
60 | .align 5 | ||
61 | NESTED(mipsIRQ, PT_SIZE, sp) | ||
62 | SAVE_ALL | ||
63 | CLI | ||
64 | .set at | ||
65 | |||
66 | mfc0 s0, CP0_CAUSE # get irq bits | ||
67 | mfc0 s1, CP0_STATUS # get irq mask | ||
68 | andi s0, ST0_IM # CAUSE.CE may be non-zero! | ||
69 | and s0, s1 | ||
70 | |||
71 | #if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) | ||
72 | .set mips32 | ||
73 | clz a0, s0 | ||
74 | .set mips0 | ||
75 | negu a0 | ||
76 | addu a0, 31-CAUSEB_IP | ||
77 | bltz a0, spurious | ||
78 | #else | ||
79 | beqz s0, spurious | ||
80 | li a0, 7 | ||
81 | |||
82 | and t0, s0, 0xf000 | ||
83 | sltiu t0, t0, 1 | ||
84 | sll t0, 2 | ||
85 | subu a0, t0 | ||
86 | sll s0, t0 | ||
87 | |||
88 | and t0, s0, 0xc000 | ||
89 | sltiu t0, t0, 1 | ||
90 | sll t0, 1 | ||
91 | subu a0, t0 | ||
92 | sll s0, t0 | ||
93 | |||
94 | and t0, s0, 0x8000 | ||
95 | sltiu t0, t0, 1 | ||
96 | # sll t0, 0 | ||
97 | subu a0, t0 | ||
98 | # sll s0, t0 | ||
99 | #endif | ||
100 | |||
101 | li a1, MIPSCPU_INT_ATLAS | ||
102 | bne a0, a1, 1f | ||
103 | addu a0, MIPSCPU_INT_BASE | ||
104 | |||
105 | jal atlas_hw0_irqdispatch | ||
106 | move a0, sp | ||
107 | |||
108 | j ret_from_irq | ||
109 | nop | ||
110 | |||
111 | 1: jal do_IRQ | ||
112 | move a1, sp | ||
113 | |||
114 | j ret_from_irq | ||
115 | nop | ||
116 | |||
117 | spurious: | ||
118 | j spurious_interrupt | ||
119 | nop | ||
120 | END(mipsIRQ) | ||
diff --git a/arch/mips/mips-boards/atlas/atlas_int.c b/arch/mips/mips-boards/atlas/atlas_int.c index bc0ebc69bfb3..db53950b7cfb 100644 --- a/arch/mips/mips-boards/atlas/atlas_int.c +++ b/arch/mips/mips-boards/atlas/atlas_int.c | |||
@@ -39,8 +39,6 @@ | |||
39 | 39 | ||
40 | static struct atlas_ictrl_regs *atlas_hw0_icregs; | 40 | static struct atlas_ictrl_regs *atlas_hw0_icregs; |
41 | 41 | ||
42 | extern asmlinkage void mipsIRQ(void); | ||
43 | |||
44 | #if 0 | 42 | #if 0 |
45 | #define DEBUG_INT(x...) printk(x) | 43 | #define DEBUG_INT(x...) printk(x) |
46 | #else | 44 | #else |
@@ -98,7 +96,7 @@ static inline int ls1bit32(unsigned int x) | |||
98 | return b; | 96 | return b; |
99 | } | 97 | } |
100 | 98 | ||
101 | void atlas_hw0_irqdispatch(struct pt_regs *regs) | 99 | static inline void atlas_hw0_irqdispatch(struct pt_regs *regs) |
102 | { | 100 | { |
103 | unsigned long int_status; | 101 | unsigned long int_status; |
104 | int irq; | 102 | int irq; |
@@ -116,6 +114,91 @@ void atlas_hw0_irqdispatch(struct pt_regs *regs) | |||
116 | do_IRQ(irq, regs); | 114 | do_IRQ(irq, regs); |
117 | } | 115 | } |
118 | 116 | ||
117 | static inline int clz(unsigned long x) | ||
118 | { | ||
119 | __asm__ ( | ||
120 | " .set push \n" | ||
121 | " .set mips32 \n" | ||
122 | " clz %0, %1 \n" | ||
123 | " .set pop \n" | ||
124 | : "=r" (x) | ||
125 | : "r" (x)); | ||
126 | |||
127 | return x; | ||
128 | } | ||
129 | |||
130 | /* | ||
131 | * Version of ffs that only looks at bits 12..15. | ||
132 | */ | ||
133 | static inline unsigned int irq_ffs(unsigned int pending) | ||
134 | { | ||
135 | #if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) | ||
136 | return -clz(pending) + 31 - CAUSEB_IP; | ||
137 | #else | ||
138 | unsigned int a0 = 7; | ||
139 | unsigned int t0; | ||
140 | |||
141 | t0 = s0 & 0xf000; | ||
142 | t0 = t0 < 1; | ||
143 | t0 = t0 << 2; | ||
144 | a0 = a0 - t0; | ||
145 | s0 = s0 << t0; | ||
146 | |||
147 | t0 = s0 & 0xc000; | ||
148 | t0 = t0 < 1; | ||
149 | t0 = t0 << 1; | ||
150 | a0 = a0 - t0; | ||
151 | s0 = s0 << t0; | ||
152 | |||
153 | t0 = s0 & 0x8000; | ||
154 | t0 = t0 < 1; | ||
155 | //t0 = t0 << 2; | ||
156 | a0 = a0 - t0; | ||
157 | //s0 = s0 << t0; | ||
158 | |||
159 | return a0; | ||
160 | #endif | ||
161 | } | ||
162 | |||
163 | /* | ||
164 | * IRQs on the Atlas board look basically (barring software IRQs which we | ||
165 | * don't use at all and all external interrupt sources are combined together | ||
166 | * on hardware interrupt 0 (MIPS IRQ 2)) like: | ||
167 | * | ||
168 | * MIPS IRQ Source | ||
169 | * -------- ------ | ||
170 | * 0 Software (ignored) | ||
171 | * 1 Software (ignored) | ||
172 | * 2 Combined hardware interrupt (hw0) | ||
173 | * 3 Hardware (ignored) | ||
174 | * 4 Hardware (ignored) | ||
175 | * 5 Hardware (ignored) | ||
176 | * 6 Hardware (ignored) | ||
177 | * 7 R4k timer (what we use) | ||
178 | * | ||
179 | * We handle the IRQ according to _our_ priority which is: | ||
180 | * | ||
181 | * Highest ---- R4k Timer | ||
182 | * Lowest ---- Combined hardware interrupt | ||
183 | * | ||
184 | * then we just return, if multiple IRQs are pending then we will just take | ||
185 | * another exception, big deal. | ||
186 | */ | ||
187 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) | ||
188 | { | ||
189 | unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; | ||
190 | int irq; | ||
191 | |||
192 | irq = irq_ffs(pending); | ||
193 | |||
194 | if (irq == MIPSCPU_INT_ATLAS) | ||
195 | atlas_hw0_irqdispatch(regs); | ||
196 | else if (irq > 0) | ||
197 | do_IRQ(MIPSCPU_INT_BASE + irq, regs); | ||
198 | else | ||
199 | spurious_interrupt(regs); | ||
200 | } | ||
201 | |||
119 | void __init arch_init_irq(void) | 202 | void __init arch_init_irq(void) |
120 | { | 203 | { |
121 | int i; | 204 | int i; |
@@ -128,9 +211,6 @@ void __init arch_init_irq(void) | |||
128 | */ | 211 | */ |
129 | atlas_hw0_icregs->intrsten = 0xffffffff; | 212 | atlas_hw0_icregs->intrsten = 0xffffffff; |
130 | 213 | ||
131 | /* Now safe to set the exception vector. */ | ||
132 | set_except_vector(0, mipsIRQ); | ||
133 | |||
134 | for (i = ATLASINT_BASE; i <= ATLASINT_END; i++) { | 214 | for (i = ATLASINT_BASE; i <= ATLASINT_END; i++) { |
135 | irq_desc[i].status = IRQ_DISABLED; | 215 | irq_desc[i].status = IRQ_DISABLED; |
136 | irq_desc[i].action = 0; | 216 | irq_desc[i].action = 0; |
diff --git a/arch/mips/mips-boards/malta/Makefile b/arch/mips/mips-boards/malta/Makefile index 3ae8fe6c0070..fd4c143c0e2f 100644 --- a/arch/mips/mips-boards/malta/Makefile +++ b/arch/mips/mips-boards/malta/Makefile | |||
@@ -19,4 +19,4 @@ | |||
19 | # under Linux. | 19 | # under Linux. |
20 | # | 20 | # |
21 | 21 | ||
22 | obj-y := malta_int.o malta-irq.o malta_setup.o | 22 | obj-y := malta_int.o malta_setup.o |
diff --git a/arch/mips/mips-boards/malta/malta-irq.S b/arch/mips/mips-boards/malta/malta-irq.S deleted file mode 100644 index 6217aff3be03..000000000000 --- a/arch/mips/mips-boards/malta/malta-irq.S +++ /dev/null | |||
@@ -1,122 +0,0 @@ | |||
1 | /* | ||
2 | * Carsten Langgaard, carstenl@mips.com | ||
3 | * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved. | ||
4 | * | ||
5 | * ######################################################################## | ||
6 | * | ||
7 | * This program is free software; you can distribute it and/or modify it | ||
8 | * under the terms of the GNU General Public License (Version 2) as | ||
9 | * published by the Free Software Foundation. | ||
10 | * | ||
11 | * This program is distributed in the hope it will be useful, but WITHOUT | ||
12 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | ||
13 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License | ||
14 | * for more details. | ||
15 | * | ||
16 | * You should have received a copy of the GNU General Public License along | ||
17 | * with this program; if not, write to the Free Software Foundation, Inc., | ||
18 | * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. | ||
19 | * | ||
20 | * ######################################################################## | ||
21 | * | ||
22 | * Interrupt exception dispatch code. | ||
23 | * | ||
24 | */ | ||
25 | #include <linux/config.h> | ||
26 | |||
27 | #include <asm/asm.h> | ||
28 | #include <asm/mipsregs.h> | ||
29 | #include <asm/regdef.h> | ||
30 | #include <asm/stackframe.h> | ||
31 | #include <asm/mips-boards/maltaint.h> | ||
32 | |||
33 | /* | ||
34 | * IRQs on the Malta board look basically (barring software IRQs which we | ||
35 | * don't use at all and all external interrupt sources are combined together | ||
36 | * on hardware interrupt 0 (MIPS IRQ 2)) like: | ||
37 | * | ||
38 | * MIPS IRQ Source | ||
39 | * -------- ------ | ||
40 | * 0 Software (ignored) | ||
41 | * 1 Software (ignored) | ||
42 | * 2 Combined hardware interrupt (hw0) | ||
43 | * 3 Hardware (ignored) | ||
44 | * 4 Hardware (ignored) | ||
45 | * 5 Hardware (ignored) | ||
46 | * 6 Hardware (ignored) | ||
47 | * 7 R4k timer (what we use) | ||
48 | * | ||
49 | * We handle the IRQ according to _our_ priority which is: | ||
50 | * | ||
51 | * Highest ---- R4k Timer | ||
52 | * Lowest ---- Combined hardware interrupt | ||
53 | * | ||
54 | * then we just return, if multiple IRQs are pending then we will just take | ||
55 | * another exception, big deal. | ||
56 | */ | ||
57 | |||
58 | .text | ||
59 | .set noreorder | ||
60 | .set noat | ||
61 | .align 5 | ||
62 | NESTED(mipsIRQ, PT_SIZE, sp) | ||
63 | SAVE_ALL | ||
64 | CLI | ||
65 | .set at | ||
66 | |||
67 | mfc0 s0, CP0_CAUSE # get irq bits | ||
68 | mfc0 s1, CP0_STATUS # get irq mask | ||
69 | andi s0, ST0_IM # CAUSE.CE may be non-zero! | ||
70 | and s0, s1 | ||
71 | |||
72 | #if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) | ||
73 | .set mips32 | ||
74 | clz a0, s0 | ||
75 | .set mips0 | ||
76 | negu a0 | ||
77 | addu a0, 31-CAUSEB_IP | ||
78 | bltz a0, spurious | ||
79 | #else | ||
80 | beqz s0, spurious | ||
81 | li a0, 7 | ||
82 | |||
83 | and t0, s0, 0xf000 | ||
84 | sltiu t0, t0, 1 | ||
85 | sll t0, 2 | ||
86 | subu a0, t0 | ||
87 | sll s0, t0 | ||
88 | |||
89 | and t0, s0, 0xc000 | ||
90 | sltiu t0, t0, 1 | ||
91 | sll t0, 1 | ||
92 | subu a0, t0 | ||
93 | sll s0, t0 | ||
94 | |||
95 | and t0, s0, 0x8000 | ||
96 | sltiu t0, t0, 1 | ||
97 | # sll t0, 0 | ||
98 | subu a0, t0 | ||
99 | # sll s0, t0 | ||
100 | #endif | ||
101 | |||
102 | li a1, MIPSCPU_INT_I8259A | ||
103 | bne a0, a1, 1f | ||
104 | addu a0, MIPSCPU_INT_BASE | ||
105 | |||
106 | jal malta_hw0_irqdispatch | ||
107 | move a0, sp | ||
108 | |||
109 | j ret_from_irq | ||
110 | nop | ||
111 | 1: | ||
112 | |||
113 | jal do_IRQ | ||
114 | move a1, sp | ||
115 | |||
116 | j ret_from_irq | ||
117 | nop | ||
118 | |||
119 | spurious: | ||
120 | j spurious_interrupt | ||
121 | nop | ||
122 | END(mipsIRQ) | ||
diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c index d06dc5ad6c9e..1da8c18b9c8e 100644 --- a/arch/mips/mips-boards/malta/malta_int.c +++ b/arch/mips/mips-boards/malta/malta_int.c | |||
@@ -40,7 +40,6 @@ | |||
40 | #include <asm/mips-boards/msc01_pci.h> | 40 | #include <asm/mips-boards/msc01_pci.h> |
41 | #include <asm/msc01_ic.h> | 41 | #include <asm/msc01_ic.h> |
42 | 42 | ||
43 | extern asmlinkage void mipsIRQ(void); | ||
44 | extern void mips_timer_interrupt(void); | 43 | extern void mips_timer_interrupt(void); |
45 | 44 | ||
46 | static DEFINE_SPINLOCK(mips_irq_lock); | 45 | static DEFINE_SPINLOCK(mips_irq_lock); |
@@ -114,7 +113,7 @@ static inline int get_int(void) | |||
114 | return irq; | 113 | return irq; |
115 | } | 114 | } |
116 | 115 | ||
117 | void malta_hw0_irqdispatch(struct pt_regs *regs) | 116 | static void malta_hw0_irqdispatch(struct pt_regs *regs) |
118 | { | 117 | { |
119 | int irq; | 118 | int irq; |
120 | 119 | ||
@@ -182,6 +181,92 @@ void corehi_irqdispatch(struct pt_regs *regs) | |||
182 | die("CoreHi interrupt", regs); | 181 | die("CoreHi interrupt", regs); |
183 | } | 182 | } |
184 | 183 | ||
184 | static inline int clz(unsigned long x) | ||
185 | { | ||
186 | __asm__ ( | ||
187 | " .set push \n" | ||
188 | " .set mips32 \n" | ||
189 | " clz %0, %1 \n" | ||
190 | " .set pop \n" | ||
191 | : "=r" (x) | ||
192 | : "r" (x)); | ||
193 | |||
194 | return x; | ||
195 | } | ||
196 | |||
197 | /* | ||
198 | * Version of ffs that only looks at bits 12..15. | ||
199 | */ | ||
200 | static inline unsigned int irq_ffs(unsigned int pending) | ||
201 | { | ||
202 | #if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) | ||
203 | return -clz(pending) + 31 - CAUSEB_IP; | ||
204 | #else | ||
205 | unsigned int a0 = 7; | ||
206 | unsigned int t0; | ||
207 | |||
208 | t0 = s0 & 0xf000; | ||
209 | t0 = t0 < 1; | ||
210 | t0 = t0 << 2; | ||
211 | a0 = a0 - t0; | ||
212 | s0 = s0 << t0; | ||
213 | |||
214 | t0 = s0 & 0xc000; | ||
215 | t0 = t0 < 1; | ||
216 | t0 = t0 << 1; | ||
217 | a0 = a0 - t0; | ||
218 | s0 = s0 << t0; | ||
219 | |||
220 | t0 = s0 & 0x8000; | ||
221 | t0 = t0 < 1; | ||
222 | //t0 = t0 << 2; | ||
223 | a0 = a0 - t0; | ||
224 | //s0 = s0 << t0; | ||
225 | |||
226 | return a0; | ||
227 | #endif | ||
228 | } | ||
229 | |||
230 | /* | ||
231 | * IRQs on the Malta board look basically (barring software IRQs which we | ||
232 | * don't use at all and all external interrupt sources are combined together | ||
233 | * on hardware interrupt 0 (MIPS IRQ 2)) like: | ||
234 | * | ||
235 | * MIPS IRQ Source | ||
236 | * -------- ------ | ||
237 | * 0 Software (ignored) | ||
238 | * 1 Software (ignored) | ||
239 | * 2 Combined hardware interrupt (hw0) | ||
240 | * 3 Hardware (ignored) | ||
241 | * 4 Hardware (ignored) | ||
242 | * 5 Hardware (ignored) | ||
243 | * 6 Hardware (ignored) | ||
244 | * 7 R4k timer (what we use) | ||
245 | * | ||
246 | * We handle the IRQ according to _our_ priority which is: | ||
247 | * | ||
248 | * Highest ---- R4k Timer | ||
249 | * Lowest ---- Combined hardware interrupt | ||
250 | * | ||
251 | * then we just return, if multiple IRQs are pending then we will just take | ||
252 | * another exception, big deal. | ||
253 | */ | ||
254 | |||
255 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) | ||
256 | { | ||
257 | unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; | ||
258 | int irq; | ||
259 | |||
260 | irq = irq_ffs(pending); | ||
261 | |||
262 | if (irq == MIPSCPU_INT_I8259A) | ||
263 | malta_hw0_irqdispatch(regs); | ||
264 | else if (irq > 0) | ||
265 | do_IRQ(MIPSCPU_INT_BASE + irq, regs); | ||
266 | else | ||
267 | spurious_interrupt(regs); | ||
268 | } | ||
269 | |||
185 | static struct irqaction i8259irq = { | 270 | static struct irqaction i8259irq = { |
186 | .handler = no_action, | 271 | .handler = no_action, |
187 | .name = "XT-PIC cascade" | 272 | .name = "XT-PIC cascade" |
@@ -214,7 +299,6 @@ int __initdata msc_nr_eicirqs = sizeof(msc_eicirqmap)/sizeof(msc_irqmap_t); | |||
214 | 299 | ||
215 | void __init arch_init_irq(void) | 300 | void __init arch_init_irq(void) |
216 | { | 301 | { |
217 | set_except_vector(0, mipsIRQ); | ||
218 | init_i8259_irqs(); | 302 | init_i8259_irqs(); |
219 | 303 | ||
220 | if (!cpu_has_veic) | 304 | if (!cpu_has_veic) |
@@ -245,7 +329,6 @@ void __init arch_init_irq(void) | |||
245 | setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction); | 329 | setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction); |
246 | } | 330 | } |
247 | else { | 331 | else { |
248 | set_except_vector(0, mipsIRQ); | ||
249 | setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq); | 332 | setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq); |
250 | setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction); | 333 | setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction); |
251 | } | 334 | } |
diff --git a/arch/mips/mips-boards/sead/Makefile b/arch/mips/mips-boards/sead/Makefile index 01780b605346..224bb848f16b 100644 --- a/arch/mips/mips-boards/sead/Makefile +++ b/arch/mips/mips-boards/sead/Makefile | |||
@@ -23,4 +23,4 @@ | |||
23 | # under Linux. | 23 | # under Linux. |
24 | # | 24 | # |
25 | 25 | ||
26 | obj-y := sead_int.o sead-irq.o sead_setup.o | 26 | obj-y := sead_int.o sead_setup.o |
diff --git a/arch/mips/mips-boards/sead/sead-irq.S b/arch/mips/mips-boards/sead/sead-irq.S deleted file mode 100644 index d5dea1d2e220..000000000000 --- a/arch/mips/mips-boards/sead/sead-irq.S +++ /dev/null | |||
@@ -1,111 +0,0 @@ | |||
1 | /* | ||
2 | * Carsten Langgaard, carstenl@mips.com | ||
3 | * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved. | ||
4 | * | ||
5 | * ######################################################################## | ||
6 | * | ||
7 | * This program is free software; you can distribute it and/or modify it | ||
8 | * under the terms of the GNU General Public License (Version 2) as | ||
9 | * published by the Free Software Foundation. | ||
10 | * | ||
11 | * This program is distributed in the hope it will be useful, but WITHOUT | ||
12 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | ||
13 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License | ||
14 | * for more details. | ||
15 | * | ||
16 | * You should have received a copy of the GNU General Public License along | ||
17 | * with this program; if not, write to the Free Software Foundation, Inc., | ||
18 | * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. | ||
19 | * | ||
20 | * ######################################################################## | ||
21 | * | ||
22 | * Interrupt exception dispatch code. | ||
23 | * | ||
24 | */ | ||
25 | #include <linux/config.h> | ||
26 | |||
27 | #include <asm/asm.h> | ||
28 | #include <asm/mipsregs.h> | ||
29 | #include <asm/regdef.h> | ||
30 | #include <asm/stackframe.h> | ||
31 | #include <asm/mips-boards/seadint.h> | ||
32 | |||
33 | /* | ||
34 | * IRQs on the SEAD board look basically are combined together on hardware | ||
35 | * interrupt 0 (MIPS IRQ 2)) like: | ||
36 | * | ||
37 | * MIPS IRQ Source | ||
38 | * -------- ------ | ||
39 | * 0 Software (ignored) | ||
40 | * 1 Software (ignored) | ||
41 | * 2 UART0 (hw0) | ||
42 | * 3 UART1 (hw1) | ||
43 | * 4 Hardware (ignored) | ||
44 | * 5 Hardware (ignored) | ||
45 | * 6 Hardware (ignored) | ||
46 | * 7 R4k timer (what we use) | ||
47 | * | ||
48 | * We handle the IRQ according to _our_ priority which is: | ||
49 | * | ||
50 | * Highest ---- R4k Timer | ||
51 | * Lowest ---- Combined hardware interrupt | ||
52 | * | ||
53 | * then we just return, if multiple IRQs are pending then we will just take | ||
54 | * another exception, big deal. | ||
55 | */ | ||
56 | |||
57 | .text | ||
58 | .set noreorder | ||
59 | .set noat | ||
60 | .align 5 | ||
61 | NESTED(mipsIRQ, PT_SIZE, sp) | ||
62 | SAVE_ALL | ||
63 | CLI | ||
64 | .set at | ||
65 | |||
66 | mfc0 s0, CP0_CAUSE # get irq bits | ||
67 | mfc0 s1, CP0_STATUS # get irq mask | ||
68 | andi s0, ST0_IM # CAUSE.CE may be non-zero! | ||
69 | and s0, s1 | ||
70 | |||
71 | #if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) | ||
72 | .set mips32 | ||
73 | clz a0, s0 | ||
74 | .set mips0 | ||
75 | negu a0 | ||
76 | addu a0, 31-CAUSEB_IP | ||
77 | bltz a0, spurious | ||
78 | #else | ||
79 | beqz s0, spurious | ||
80 | li a0, 7 | ||
81 | |||
82 | and t0, s0, 0xf000 | ||
83 | sltiu t0, t0, 1 | ||
84 | sll t0, 2 | ||
85 | subu a0, t0 | ||
86 | sll s0, t0 | ||
87 | |||
88 | and t0, s0, 0xc000 | ||
89 | sltiu t0, t0, 1 | ||
90 | sll t0, 1 | ||
91 | subu a0, t0 | ||
92 | sll s0, t0 | ||
93 | |||
94 | and t0, s0, 0x8000 | ||
95 | sltiu t0, t0, 1 | ||
96 | # sll t0, 0 | ||
97 | subu a0, t0 | ||
98 | # sll s0, t0 | ||
99 | #endif | ||
100 | |||
101 | addu a0, MIPSCPU_INT_BASE | ||
102 | jal do_IRQ | ||
103 | move a1, sp | ||
104 | |||
105 | j ret_from_irq | ||
106 | nop | ||
107 | |||
108 | spurious: | ||
109 | j spurious_interrupt | ||
110 | nop | ||
111 | END(mipsIRQ) | ||
diff --git a/arch/mips/mips-boards/sead/sead_int.c b/arch/mips/mips-boards/sead/sead_int.c index 90fda0d9915f..9168d934c661 100644 --- a/arch/mips/mips-boards/sead/sead_int.c +++ b/arch/mips/mips-boards/sead/sead_int.c | |||
@@ -24,16 +24,94 @@ | |||
24 | #include <linux/irq.h> | 24 | #include <linux/irq.h> |
25 | 25 | ||
26 | #include <asm/irq_cpu.h> | 26 | #include <asm/irq_cpu.h> |
27 | #include <asm/mipsregs.h> | ||
27 | #include <asm/system.h> | 28 | #include <asm/system.h> |
28 | 29 | ||
29 | #include <asm/mips-boards/seadint.h> | 30 | #include <asm/mips-boards/seadint.h> |
30 | 31 | ||
31 | extern asmlinkage void mipsIRQ(void); | 32 | static inline int clz(unsigned long x) |
33 | { | ||
34 | __asm__ ( | ||
35 | " .set push \n" | ||
36 | " .set mips32 \n" | ||
37 | " clz %0, %1 \n" | ||
38 | " .set pop \n" | ||
39 | : "=r" (x) | ||
40 | : "r" (x)); | ||
41 | |||
42 | return x; | ||
43 | } | ||
44 | |||
45 | /* | ||
46 | * Version of ffs that only looks at bits 12..15. | ||
47 | */ | ||
48 | static inline unsigned int irq_ffs(unsigned int pending) | ||
49 | { | ||
50 | #if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) | ||
51 | return -clz(pending) + 31 - CAUSEB_IP; | ||
52 | #else | ||
53 | unsigned int a0 = 7; | ||
54 | unsigned int t0; | ||
55 | |||
56 | t0 = s0 & 0xf000; | ||
57 | t0 = t0 < 1; | ||
58 | t0 = t0 << 2; | ||
59 | a0 = a0 - t0; | ||
60 | s0 = s0 << t0; | ||
61 | |||
62 | t0 = s0 & 0xc000; | ||
63 | t0 = t0 < 1; | ||
64 | t0 = t0 << 1; | ||
65 | a0 = a0 - t0; | ||
66 | s0 = s0 << t0; | ||
67 | |||
68 | t0 = s0 & 0x8000; | ||
69 | t0 = t0 < 1; | ||
70 | //t0 = t0 << 2; | ||
71 | a0 = a0 - t0; | ||
72 | //s0 = s0 << t0; | ||
73 | |||
74 | return a0; | ||
75 | #endif | ||
76 | } | ||
77 | |||
78 | /* | ||
79 | * IRQs on the SEAD board look basically are combined together on hardware | ||
80 | * interrupt 0 (MIPS IRQ 2)) like: | ||
81 | * | ||
82 | * MIPS IRQ Source | ||
83 | * -------- ------ | ||
84 | * 0 Software (ignored) | ||
85 | * 1 Software (ignored) | ||
86 | * 2 UART0 (hw0) | ||
87 | * 3 UART1 (hw1) | ||
88 | * 4 Hardware (ignored) | ||
89 | * 5 Hardware (ignored) | ||
90 | * 6 Hardware (ignored) | ||
91 | * 7 R4k timer (what we use) | ||
92 | * | ||
93 | * We handle the IRQ according to _our_ priority which is: | ||
94 | * | ||
95 | * Highest ---- R4k Timer | ||
96 | * Lowest ---- Combined hardware interrupt | ||
97 | * | ||
98 | * then we just return, if multiple IRQs are pending then we will just take | ||
99 | * another exception, big deal. | ||
100 | */ | ||
101 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) | ||
102 | { | ||
103 | unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; | ||
104 | int irq; | ||
105 | |||
106 | irq = irq_ffs(pending); | ||
107 | |||
108 | if (irq >= 0) | ||
109 | do_IRQ(MIPSCPU_INT_BASE + irq, regs); | ||
110 | else | ||
111 | spurious_interrupt(regs); | ||
112 | } | ||
32 | 113 | ||
33 | void __init arch_init_irq(void) | 114 | void __init arch_init_irq(void) |
34 | { | 115 | { |
35 | mips_cpu_irq_init(MIPSCPU_INT_BASE); | 116 | mips_cpu_irq_init(MIPSCPU_INT_BASE); |
36 | |||
37 | /* Now safe to set the exception vector. */ | ||
38 | set_except_vector(0, mipsIRQ); | ||
39 | } | 117 | } |
diff --git a/arch/mips/mips-boards/sim/sim_int.c b/arch/mips/mips-boards/sim/sim_int.c index a4d0a2c05031..2c15c8efec4e 100644 --- a/arch/mips/mips-boards/sim/sim_int.c +++ b/arch/mips/mips-boards/sim/sim_int.c | |||
@@ -25,17 +25,71 @@ | |||
25 | 25 | ||
26 | extern void mips_cpu_irq_init(int); | 26 | extern void mips_cpu_irq_init(int); |
27 | 27 | ||
28 | extern asmlinkage void simIRQ(void); | 28 | static inline int clz(unsigned long x) |
29 | { | ||
30 | __asm__ ( | ||
31 | " .set push \n" | ||
32 | " .set mips32 \n" | ||
33 | " clz %0, %1 \n" | ||
34 | " .set pop \n" | ||
35 | : "=r" (x) | ||
36 | : "r" (x)); | ||
37 | |||
38 | return x; | ||
39 | } | ||
40 | |||
41 | /* | ||
42 | * Version of ffs that only looks at bits 12..15. | ||
43 | */ | ||
44 | static inline unsigned int irq_ffs(unsigned int pending) | ||
45 | { | ||
46 | #if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) | ||
47 | return -clz(pending) + 31 - CAUSEB_IP; | ||
48 | #else | ||
49 | unsigned int a0 = 7; | ||
50 | unsigned int t0; | ||
51 | |||
52 | t0 = s0 & 0xf000; | ||
53 | t0 = t0 < 1; | ||
54 | t0 = t0 << 2; | ||
55 | a0 = a0 - t0; | ||
56 | s0 = s0 << t0; | ||
57 | |||
58 | t0 = s0 & 0xc000; | ||
59 | t0 = t0 < 1; | ||
60 | t0 = t0 << 1; | ||
61 | a0 = a0 - t0; | ||
62 | s0 = s0 << t0; | ||
29 | 63 | ||
30 | asmlinkage void sim_hw0_irqdispatch(struct pt_regs *regs) | 64 | t0 = s0 & 0x8000; |
65 | t0 = t0 < 1; | ||
66 | //t0 = t0 << 2; | ||
67 | a0 = a0 - t0; | ||
68 | //s0 = s0 << t0; | ||
69 | |||
70 | return a0; | ||
71 | #endif | ||
72 | } | ||
73 | |||
74 | static inline void sim_hw0_irqdispatch(struct pt_regs *regs) | ||
31 | { | 75 | { |
32 | do_IRQ(2, regs); | 76 | do_IRQ(2, regs); |
33 | } | 77 | } |
34 | 78 | ||
35 | void __init arch_init_irq(void) | 79 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) |
36 | { | 80 | { |
37 | /* Now safe to set the exception vector. */ | 81 | unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; |
38 | set_except_vector(0, simIRQ); | 82 | int irq; |
83 | |||
84 | irq = irq_ffs(pending); | ||
39 | 85 | ||
86 | if (irq > 0) | ||
87 | do_IRQ(MIPSCPU_INT_BASE + irq, regs); | ||
88 | else | ||
89 | spurious_interrupt(regs); | ||
90 | } | ||
91 | |||
92 | void __init arch_init_irq(void) | ||
93 | { | ||
40 | mips_cpu_irq_init(MIPSCPU_INT_BASE); | 94 | mips_cpu_irq_init(MIPSCPU_INT_BASE); |
41 | } | 95 | } |
diff --git a/arch/mips/momentum/jaguar_atx/Makefile b/arch/mips/momentum/jaguar_atx/Makefile index 20bbd3ea44a8..67372f3f9654 100644 --- a/arch/mips/momentum/jaguar_atx/Makefile +++ b/arch/mips/momentum/jaguar_atx/Makefile | |||
@@ -6,7 +6,7 @@ | |||
6 | # unless it's something special (ie not a .c file). | 6 | # unless it's something special (ie not a .c file). |
7 | # | 7 | # |
8 | 8 | ||
9 | obj-y += int-handler.o irq.o prom.o reset.o setup.o | 9 | obj-y += irq.o prom.o reset.o setup.o |
10 | 10 | ||
11 | obj-$(CONFIG_SERIAL_8250_CONSOLE) += ja-console.o | 11 | obj-$(CONFIG_SERIAL_8250_CONSOLE) += ja-console.o |
12 | obj-$(CONFIG_REMOTE_DEBUG) += dbg_io.o | 12 | obj-$(CONFIG_REMOTE_DEBUG) += dbg_io.o |
diff --git a/arch/mips/momentum/jaguar_atx/int-handler.S b/arch/mips/momentum/jaguar_atx/int-handler.S deleted file mode 100644 index 55bc789733f2..000000000000 --- a/arch/mips/momentum/jaguar_atx/int-handler.S +++ /dev/null | |||
@@ -1,128 +0,0 @@ | |||
1 | /* | ||
2 | * Copyright 2002 Momentum Computer Inc. | ||
3 | * Author: Matthew Dharm <mdharm@momenco.com> | ||
4 | * | ||
5 | * Based on work: | ||
6 | * Copyright 2001 MontaVista Software Inc. | ||
7 | * Author: jsun@mvista.com or jsun@junsun.net | ||
8 | * | ||
9 | * First-level interrupt dispatcher for Jaguar-ATX board. | ||
10 | * | ||
11 | * This program is free software; you can redistribute it and/or modify it | ||
12 | * under the terms of the GNU General Public License as published by the | ||
13 | * Free Software Foundation; either version 2 of the License, or (at your | ||
14 | * option) any later version. | ||
15 | */ | ||
16 | #include <asm/asm.h> | ||
17 | #include <asm/mipsregs.h> | ||
18 | #include <asm/addrspace.h> | ||
19 | #include <asm/regdef.h> | ||
20 | #include <asm/stackframe.h> | ||
21 | |||
22 | /* | ||
23 | * First level interrupt dispatcher for Ocelot-CS board | ||
24 | */ | ||
25 | .align 5 | ||
26 | NESTED(jaguar_handle_int, PT_SIZE, sp) | ||
27 | SAVE_ALL | ||
28 | CLI | ||
29 | .set at | ||
30 | mfc0 t0, CP0_CAUSE | ||
31 | mfc0 t2, CP0_STATUS | ||
32 | |||
33 | and t0, t2 | ||
34 | |||
35 | andi t1, t0, STATUSF_IP0 /* sw0 software interrupt */ | ||
36 | bnez t1, ll_sw0_irq | ||
37 | andi t1, t0, STATUSF_IP1 /* sw1 software interrupt */ | ||
38 | bnez t1, ll_sw1_irq | ||
39 | andi t1, t0, STATUSF_IP2 /* int0 hardware line */ | ||
40 | bnez t1, ll_pcixa_irq | ||
41 | andi t1, t0, STATUSF_IP3 /* int1 hardware line */ | ||
42 | bnez t1, ll_pcixb_irq | ||
43 | andi t1, t0, STATUSF_IP4 /* int2 hardware line */ | ||
44 | bnez t1, ll_pcia_irq | ||
45 | andi t1, t0, STATUSF_IP5 /* int3 hardware line */ | ||
46 | bnez t1, ll_pcib_irq | ||
47 | andi t1, t0, STATUSF_IP6 /* int4 hardware line */ | ||
48 | bnez t1, ll_uart_irq | ||
49 | andi t1, t0, STATUSF_IP7 /* cpu timer */ | ||
50 | bnez t1, ll_cputimer_irq | ||
51 | |||
52 | nop | ||
53 | nop | ||
54 | |||
55 | /* now look at extended interrupts */ | ||
56 | mfc0 t0, CP0_CAUSE | ||
57 | cfc0 t1, CP0_S1_INTCONTROL | ||
58 | |||
59 | /* shift the mask 8 bits left to line up the bits */ | ||
60 | sll t2, t1, 8 | ||
61 | |||
62 | and t0, t2 | ||
63 | srl t0, t0, 16 | ||
64 | |||
65 | andi t1, t0, STATUSF_IP8 /* int6 hardware line */ | ||
66 | bnez t1, ll_mv64340_decode_irq | ||
67 | |||
68 | nop | ||
69 | nop | ||
70 | |||
71 | .set reorder | ||
72 | |||
73 | /* wrong alarm or masked ... */ | ||
74 | j spurious_interrupt | ||
75 | nop | ||
76 | END(jaguar_handle_int) | ||
77 | |||
78 | .align 5 | ||
79 | ll_sw0_irq: | ||
80 | li a0, 0 | ||
81 | move a1, sp | ||
82 | jal do_IRQ | ||
83 | j ret_from_irq | ||
84 | ll_sw1_irq: | ||
85 | li a0, 1 | ||
86 | move a1, sp | ||
87 | jal do_IRQ | ||
88 | j ret_from_irq | ||
89 | ll_pcixa_irq: | ||
90 | li a0, 2 | ||
91 | move a1, sp | ||
92 | jal do_IRQ | ||
93 | j ret_from_irq | ||
94 | |||
95 | ll_pcixb_irq: | ||
96 | li a0, 3 | ||
97 | move a1, sp | ||
98 | jal do_IRQ | ||
99 | j ret_from_irq | ||
100 | |||
101 | ll_pcia_irq: | ||
102 | li a0, 4 | ||
103 | move a1, sp | ||
104 | jal do_IRQ | ||
105 | j ret_from_irq | ||
106 | |||
107 | ll_pcib_irq: | ||
108 | li a0, 5 | ||
109 | move a1, sp | ||
110 | jal do_IRQ | ||
111 | j ret_from_irq | ||
112 | |||
113 | ll_uart_irq: | ||
114 | li a0, 6 | ||
115 | move a1, sp | ||
116 | jal do_IRQ | ||
117 | j ret_from_irq | ||
118 | |||
119 | ll_cputimer_irq: | ||
120 | li a0, 7 | ||
121 | move a1, sp | ||
122 | jal ll_timer_interrupt | ||
123 | j ret_from_irq | ||
124 | |||
125 | ll_mv64340_decode_irq: | ||
126 | move a0, sp | ||
127 | jal ll_mv64340_irq | ||
128 | j ret_from_irq | ||
diff --git a/arch/mips/momentum/jaguar_atx/irq.c b/arch/mips/momentum/jaguar_atx/irq.c index 15588f91ace2..ec4032b38f19 100644 --- a/arch/mips/momentum/jaguar_atx/irq.c +++ b/arch/mips/momentum/jaguar_atx/irq.c | |||
@@ -10,7 +10,7 @@ | |||
10 | * Copyright 2001 MontaVista Software Inc. | 10 | * Copyright 2001 MontaVista Software Inc. |
11 | * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net | 11 | * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net |
12 | * | 12 | * |
13 | * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org) | 13 | * Copyright (C) 2000, 01, 06 Ralf Baechle (ralf@linux-mips.org) |
14 | * | 14 | * |
15 | * This program is free software; you can redistribute it and/or modify it | 15 | * This program is free software; you can redistribute it and/or modify it |
16 | * under the terms of the GNU General Public License as published by the | 16 | * under the terms of the GNU General Public License as published by the |
@@ -38,8 +38,37 @@ | |||
38 | #include <linux/types.h> | 38 | #include <linux/types.h> |
39 | #include <asm/irq_cpu.h> | 39 | #include <asm/irq_cpu.h> |
40 | #include <asm/mipsregs.h> | 40 | #include <asm/mipsregs.h> |
41 | #include <asm/time.h> | ||
41 | 42 | ||
42 | extern asmlinkage void jaguar_handle_int(void); | 43 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) |
44 | { | ||
45 | unsigned int pending = read_c0_cause() & read_c0_status(); | ||
46 | |||
47 | if (pending & STATUSF_IP0) | ||
48 | do_IRQ(0, regs); | ||
49 | else if (pending & STATUSF_IP1) | ||
50 | do_IRQ(1, regs); | ||
51 | else if (pending & STATUSF_IP2) | ||
52 | do_IRQ(2, regs); | ||
53 | else if (pending & STATUSF_IP3) | ||
54 | do_IRQ(3, regs); | ||
55 | else if (pending & STATUSF_IP4) | ||
56 | do_IRQ(4, regs); | ||
57 | else if (pending & STATUSF_IP5) | ||
58 | do_IRQ(5, regs); | ||
59 | else if (pending & STATUSF_IP6) | ||
60 | do_IRQ(6, regs); | ||
61 | else if (pending & STATUSF_IP7) | ||
62 | ll_timer_interrupt(7, regs); | ||
63 | else { | ||
64 | /* | ||
65 | * Now look at the extended interrupts | ||
66 | */ | ||
67 | pending = (read_c0_cause() & (read_c0_intcontrol() << 8)) >> 16; | ||
68 | if (pending & STATUSF_IP8) | ||
69 | ll_mv64340_irq(regs); | ||
70 | } | ||
71 | } | ||
43 | 72 | ||
44 | static struct irqaction cascade_mv64340 = { | 73 | static struct irqaction cascade_mv64340 = { |
45 | no_action, SA_INTERRUPT, CPU_MASK_NONE, "MV64340-Cascade", NULL, NULL | 74 | no_action, SA_INTERRUPT, CPU_MASK_NONE, "MV64340-Cascade", NULL, NULL |
@@ -53,8 +82,6 @@ void __init arch_init_irq(void) | |||
53 | */ | 82 | */ |
54 | clear_c0_status(ST0_IM); | 83 | clear_c0_status(ST0_IM); |
55 | 84 | ||
56 | /* Sets the first-level interrupt dispatcher. */ | ||
57 | set_except_vector(0, jaguar_handle_int); | ||
58 | mips_cpu_irq_init(0); | 85 | mips_cpu_irq_init(0); |
59 | rm7k_cpu_irq_init(8); | 86 | rm7k_cpu_irq_init(8); |
60 | 87 | ||
diff --git a/arch/mips/momentum/ocelot_3/Makefile b/arch/mips/momentum/ocelot_3/Makefile index aab8fd89f830..8bcea64dd27b 100644 --- a/arch/mips/momentum/ocelot_3/Makefile +++ b/arch/mips/momentum/ocelot_3/Makefile | |||
@@ -5,4 +5,4 @@ | |||
5 | # removes any old dependencies. DON'T put your own dependencies here | 5 | # removes any old dependencies. DON'T put your own dependencies here |
6 | # unless it's something special (ie not a .c file). | 6 | # unless it's something special (ie not a .c file). |
7 | # | 7 | # |
8 | obj-y += int-handler.o irq.o prom.o reset.o setup.o | 8 | obj-y += irq.o prom.o reset.o setup.o |
diff --git a/arch/mips/momentum/ocelot_3/int-handler.S b/arch/mips/momentum/ocelot_3/int-handler.S deleted file mode 100644 index b1207262984a..000000000000 --- a/arch/mips/momentum/ocelot_3/int-handler.S +++ /dev/null | |||
@@ -1,139 +0,0 @@ | |||
1 | /* | ||
2 | * Copyright 2002 Momentum Computer Inc. | ||
3 | * Author: Matthew Dharm <mdharm@momenco.com> | ||
4 | * | ||
5 | * Copyright 2001 MontaVista Software Inc. | ||
6 | * Author: jsun@mvista.com or jsun@junsun.net | ||
7 | * | ||
8 | * Copyright 2004 PMC-Sierra | ||
9 | * Author: Manish Lachwani (lachwani@pmc-sierra.com) | ||
10 | * | ||
11 | * Copyright (C) 2004 MontaVista Software Inc. | ||
12 | * Author: Manish Lachwani, mlachwani@mvista.com | ||
13 | * | ||
14 | * First-level interrupt dispatcher for Ocelot-3 board. | ||
15 | * | ||
16 | * This program is free software; you can redistribute it and/or modify it | ||
17 | * under the terms of the GNU General Public License as published by the | ||
18 | * Free Software Foundation; either version 2 of the License, or (at your | ||
19 | * option) any later version. | ||
20 | */ | ||
21 | #include <asm/asm.h> | ||
22 | #include <asm/mipsregs.h> | ||
23 | #include <asm/addrspace.h> | ||
24 | #include <asm/regdef.h> | ||
25 | #include <asm/stackframe.h> | ||
26 | |||
27 | /* | ||
28 | * First level interrupt dispatcher for Ocelot-3 board | ||
29 | */ | ||
30 | .align 5 | ||
31 | NESTED(ocelot3_handle_int, PT_SIZE, sp) | ||
32 | SAVE_ALL | ||
33 | CLI | ||
34 | .set at | ||
35 | |||
36 | mfc0 t0, CP0_CAUSE | ||
37 | mfc0 t2, CP0_STATUS | ||
38 | |||
39 | and t0, t2 | ||
40 | |||
41 | andi t1, t0, STATUSF_IP0 /* sw0 software interrupt (IRQ0) */ | ||
42 | bnez t1, ll_sw0_irq | ||
43 | |||
44 | andi t1, t0, STATUSF_IP1 /* sw1 software interrupt (IRQ1) */ | ||
45 | bnez t1, ll_sw1_irq | ||
46 | |||
47 | andi t1, t0, STATUSF_IP2 /* int0 hardware line (IRQ2) */ | ||
48 | bnez t1, ll_pci0slot1_irq | ||
49 | |||
50 | andi t1, t0, STATUSF_IP3 /* int1 hardware line (IRQ3) */ | ||
51 | bnez t1, ll_pci0slot2_irq | ||
52 | |||
53 | andi t1, t0, STATUSF_IP4 /* int2 hardware line (IRQ4) */ | ||
54 | bnez t1, ll_pci1slot1_irq | ||
55 | |||
56 | andi t1, t0, STATUSF_IP5 /* int3 hardware line (IRQ5) */ | ||
57 | bnez t1, ll_pci1slot2_irq | ||
58 | |||
59 | andi t1, t0, STATUSF_IP6 /* int4 hardware line (IRQ6) */ | ||
60 | bnez t1, ll_uart_irq | ||
61 | |||
62 | andi t1, t0, STATUSF_IP7 /* cpu timer (IRQ7) */ | ||
63 | bnez t1, ll_cputimer_irq | ||
64 | |||
65 | /* now look at extended interrupts */ | ||
66 | mfc0 t0, CP0_CAUSE | ||
67 | cfc0 t1, CP0_S1_INTCONTROL | ||
68 | |||
69 | /* shift the mask 8 bits left to line up the bits */ | ||
70 | sll t2, t1, 8 | ||
71 | |||
72 | and t0, t2 | ||
73 | srl t0, t0, 16 | ||
74 | |||
75 | andi t1, t0, STATUSF_IP8 /* int6 hardware line (IRQ9) */ | ||
76 | bnez t1, ll_mv64340_decode_irq | ||
77 | |||
78 | .set reorder | ||
79 | |||
80 | /* wrong alarm or masked ... */ | ||
81 | jal spurious_interrupt | ||
82 | nop | ||
83 | j ret_from_irq | ||
84 | nop | ||
85 | END(ocelot3_handle_int) | ||
86 | |||
87 | .align 5 | ||
88 | ll_sw0_irq: | ||
89 | li a0, 0 /* IRQ 1 */ | ||
90 | move a1, sp | ||
91 | jal do_IRQ | ||
92 | j ret_from_irq | ||
93 | ll_sw1_irq: | ||
94 | li a0, 1 /* IRQ 2 */ | ||
95 | move a1, sp | ||
96 | jal do_IRQ | ||
97 | j ret_from_irq | ||
98 | |||
99 | ll_pci0slot1_irq: | ||
100 | li a0, 2 /* IRQ 3 */ | ||
101 | move a1, sp | ||
102 | jal do_IRQ | ||
103 | j ret_from_irq | ||
104 | |||
105 | ll_pci0slot2_irq: | ||
106 | li a0, 3 /* IRQ 4 */ | ||
107 | move a1, sp | ||
108 | jal do_IRQ | ||
109 | j ret_from_irq | ||
110 | |||
111 | ll_pci1slot1_irq: | ||
112 | li a0, 4 /* IRQ 5 */ | ||
113 | move a1, sp | ||
114 | jal do_IRQ | ||
115 | j ret_from_irq | ||
116 | |||
117 | ll_pci1slot2_irq: | ||
118 | li a0, 5 /* IRQ 6 */ | ||
119 | move a1, sp | ||
120 | jal do_IRQ | ||
121 | j ret_from_irq | ||
122 | |||
123 | ll_uart_irq: | ||
124 | li a0, 6 /* IRQ 7 */ | ||
125 | move a1, sp | ||
126 | jal do_IRQ | ||
127 | j ret_from_irq | ||
128 | |||
129 | ll_cputimer_irq: | ||
130 | li a0, 7 /* IRQ 8 */ | ||
131 | move a1, sp | ||
132 | jal do_IRQ | ||
133 | j ret_from_irq | ||
134 | |||
135 | ll_mv64340_decode_irq: | ||
136 | move a0, sp | ||
137 | jal ll_mv64340_irq | ||
138 | j ret_from_irq | ||
139 | |||
diff --git a/arch/mips/momentum/ocelot_3/irq.c b/arch/mips/momentum/ocelot_3/irq.c index 42464dbd4ad2..87c63c340ae3 100644 --- a/arch/mips/momentum/ocelot_3/irq.c +++ b/arch/mips/momentum/ocelot_3/irq.c | |||
@@ -53,8 +53,6 @@ | |||
53 | #include <asm/mipsregs.h> | 53 | #include <asm/mipsregs.h> |
54 | #include <asm/system.h> | 54 | #include <asm/system.h> |
55 | 55 | ||
56 | extern asmlinkage void ocelot3_handle_int(void); | ||
57 | |||
58 | static struct irqaction cascade_mv64340 = { | 56 | static struct irqaction cascade_mv64340 = { |
59 | no_action, SA_INTERRUPT, CPU_MASK_NONE, "MV64340-Cascade", NULL, NULL | 57 | no_action, SA_INTERRUPT, CPU_MASK_NONE, "MV64340-Cascade", NULL, NULL |
60 | }; | 58 | }; |
@@ -67,9 +65,6 @@ void __init arch_init_irq(void) | |||
67 | */ | 65 | */ |
68 | clear_c0_status(ST0_IM | ST0_BEV); | 66 | clear_c0_status(ST0_IM | ST0_BEV); |
69 | 67 | ||
70 | /* Sets the first-level interrupt dispatcher. */ | ||
71 | set_except_vector(0, ocelot3_handle_int); | ||
72 | mips_cpu_irq_init(0); | ||
73 | rm7k_cpu_irq_init(8); | 68 | rm7k_cpu_irq_init(8); |
74 | 69 | ||
75 | /* set up the cascading interrupts */ | 70 | /* set up the cascading interrupts */ |
@@ -79,3 +74,36 @@ void __init arch_init_irq(void) | |||
79 | set_c0_status(ST0_IM); /* IE in the status register */ | 74 | set_c0_status(ST0_IM); /* IE in the status register */ |
80 | 75 | ||
81 | } | 76 | } |
77 | |||
78 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) | ||
79 | { | ||
80 | unsigned int pending = read_c0_cause() & read_c0_status(); | ||
81 | |||
82 | if (pending & STATUSF_IP0) | ||
83 | do_IRQ(0, regs); | ||
84 | else if (pending & STATUSF_IP1) | ||
85 | do_IRQ(1, regs); | ||
86 | else if (pending & STATUSF_IP2) | ||
87 | do_IRQ(2, regs); | ||
88 | else if (pending & STATUSF_IP3) | ||
89 | do_IRQ(3, regs); | ||
90 | else if (pending & STATUSF_IP4) | ||
91 | do_IRQ(4, regs); | ||
92 | else if (pending & STATUSF_IP5) | ||
93 | do_IRQ(5, regs); | ||
94 | else if (pending & STATUSF_IP6) | ||
95 | do_IRQ(6, regs); | ||
96 | else if (pending & STATUSF_IP7) | ||
97 | do_IRQ(7, regs); | ||
98 | else { | ||
99 | /* | ||
100 | * Now look at the extended interrupts | ||
101 | */ | ||
102 | pending = (read_c0_cause() & (read_c0_intcontrol() << 8)) >> 16; | ||
103 | |||
104 | if (pending & STATUSF_IP8) | ||
105 | ll_mv64340_irq(regs); | ||
106 | else | ||
107 | spurious_interrupt(regs); | ||
108 | } | ||
109 | } | ||
diff --git a/arch/mips/momentum/ocelot_c/Makefile b/arch/mips/momentum/ocelot_c/Makefile index 91240777f978..94802b4db472 100644 --- a/arch/mips/momentum/ocelot_c/Makefile +++ b/arch/mips/momentum/ocelot_c/Makefile | |||
@@ -2,7 +2,7 @@ | |||
2 | # Makefile for Momentum Computer's Ocelot-C and -CS boards. | 2 | # Makefile for Momentum Computer's Ocelot-C and -CS boards. |
3 | # | 3 | # |
4 | 4 | ||
5 | obj-y += cpci-irq.o int-handler.o irq.o prom.o reset.o \ | 5 | obj-y += cpci-irq.o irq.o prom.o reset.o \ |
6 | setup.o uart-irq.o | 6 | setup.o uart-irq.o |
7 | 7 | ||
8 | obj-$(CONFIG_KGDB) += dbg_io.o | 8 | obj-$(CONFIG_KGDB) += dbg_io.o |
diff --git a/arch/mips/momentum/ocelot_c/int-handler.S b/arch/mips/momentum/ocelot_c/int-handler.S deleted file mode 100644 index f77834193c3c..000000000000 --- a/arch/mips/momentum/ocelot_c/int-handler.S +++ /dev/null | |||
@@ -1,103 +0,0 @@ | |||
1 | /* | ||
2 | * Copyright 2002 Momentum Computer Inc. | ||
3 | * Author: Matthew Dharm <mdharm@momenco.com> | ||
4 | * | ||
5 | * Copyright 2001 MontaVista Software Inc. | ||
6 | * Author: jsun@mvista.com or jsun@junsun.net | ||
7 | * | ||
8 | * First-level interrupt dispatcher for Ocelot-CS board. | ||
9 | * | ||
10 | * This program is free software; you can redistribute it and/or modify it | ||
11 | * under the terms of the GNU General Public License as published by the | ||
12 | * Free Software Foundation; either version 2 of the License, or (at your | ||
13 | * option) any later version. | ||
14 | */ | ||
15 | #include <asm/asm.h> | ||
16 | #include <asm/mipsregs.h> | ||
17 | #include <asm/addrspace.h> | ||
18 | #include <asm/regdef.h> | ||
19 | #include <asm/stackframe.h> | ||
20 | #include "ocelot_c_fpga.h" | ||
21 | |||
22 | /* | ||
23 | * First level interrupt dispatcher for Ocelot-CS board | ||
24 | */ | ||
25 | .align 5 | ||
26 | NESTED(ocelot_handle_int, PT_SIZE, sp) | ||
27 | SAVE_ALL | ||
28 | CLI | ||
29 | .set at | ||
30 | mfc0 t0, CP0_CAUSE | ||
31 | mfc0 t2, CP0_STATUS | ||
32 | |||
33 | and t0, t2 | ||
34 | |||
35 | andi t1, t0, STATUSF_IP0 /* sw0 software interrupt */ | ||
36 | bnez t1, ll_sw0_irq | ||
37 | andi t1, t0, STATUSF_IP1 /* sw1 software interrupt */ | ||
38 | bnez t1, ll_sw1_irq | ||
39 | andi t1, t0, STATUSF_IP2 /* int0 hardware line */ | ||
40 | bnez t1, ll_scsi_irq | ||
41 | andi t1, t0, STATUSF_IP3 /* int1 hardware line */ | ||
42 | bnez t1, ll_uart_decode_irq | ||
43 | andi t1, t0, STATUSF_IP4 /* int2 hardware line */ | ||
44 | bnez t1, ll_pmc_irq | ||
45 | andi t1, t0, STATUSF_IP5 /* int3 hardware line */ | ||
46 | bnez t1, ll_cpci_decode_irq | ||
47 | andi t1, t0, STATUSF_IP6 /* int4 hardware line */ | ||
48 | bnez t1, ll_mv64340_decode_irq | ||
49 | andi t1, t0, STATUSF_IP7 /* cpu timer */ | ||
50 | bnez t1, ll_cputimer_irq | ||
51 | |||
52 | .set reorder | ||
53 | |||
54 | /* wrong alarm or masked ... */ | ||
55 | jal spurious_interrupt | ||
56 | nop | ||
57 | j ret_from_irq | ||
58 | END(ocelot_handle_int) | ||
59 | |||
60 | .align 5 | ||
61 | ll_sw0_irq: | ||
62 | li a0, 0 | ||
63 | move a1, sp | ||
64 | jal do_IRQ | ||
65 | j ret_from_irq | ||
66 | ll_sw1_irq: | ||
67 | li a0, 1 | ||
68 | move a1, sp | ||
69 | jal do_IRQ | ||
70 | j ret_from_irq | ||
71 | ll_scsi_irq: | ||
72 | li a0, 2 | ||
73 | move a1, sp | ||
74 | jal do_IRQ | ||
75 | j ret_from_irq | ||
76 | |||
77 | ll_uart_decode_irq: | ||
78 | move a0, sp | ||
79 | jal ll_uart_irq | ||
80 | j ret_from_irq | ||
81 | |||
82 | ll_pmc_irq: | ||
83 | li a0, 4 | ||
84 | move a1, sp | ||
85 | jal do_IRQ | ||
86 | j ret_from_irq | ||
87 | |||
88 | ll_cpci_decode_irq: | ||
89 | move a0, sp | ||
90 | jal ll_cpci_irq | ||
91 | j ret_from_irq | ||
92 | |||
93 | ll_mv64340_decode_irq: | ||
94 | move a0, sp | ||
95 | jal ll_mv64340_irq | ||
96 | j ret_from_irq | ||
97 | |||
98 | ll_cputimer_irq: | ||
99 | li a0, 7 | ||
100 | move a1, sp | ||
101 | jal do_IRQ | ||
102 | j ret_from_irq | ||
103 | |||
diff --git a/arch/mips/momentum/ocelot_c/irq.c b/arch/mips/momentum/ocelot_c/irq.c index a5764bc20e36..86f61ce59e53 100644 --- a/arch/mips/momentum/ocelot_c/irq.c +++ b/arch/mips/momentum/ocelot_c/irq.c | |||
@@ -48,7 +48,6 @@ | |||
48 | #include <asm/mipsregs.h> | 48 | #include <asm/mipsregs.h> |
49 | #include <asm/system.h> | 49 | #include <asm/system.h> |
50 | 50 | ||
51 | extern asmlinkage void ocelot_handle_int(void); | ||
52 | extern void uart_irq_init(void); | 51 | extern void uart_irq_init(void); |
53 | extern void cpci_irq_init(void); | 52 | extern void cpci_irq_init(void); |
54 | 53 | ||
@@ -60,6 +59,33 @@ static struct irqaction cascade_mv64340 = { | |||
60 | no_action, SA_INTERRUPT, CPU_MASK_NONE, "cascade via MV64340", NULL, NULL | 59 | no_action, SA_INTERRUPT, CPU_MASK_NONE, "cascade via MV64340", NULL, NULL |
61 | }; | 60 | }; |
62 | 61 | ||
62 | extern void ll_uart_irq(struct pt_regs *regs); | ||
63 | extern void ll_cpci_irq(struct pt_regs *regs); | ||
64 | |||
65 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) | ||
66 | { | ||
67 | unsigned int pending = read_c0_cause() & read_c0_status(); | ||
68 | |||
69 | if (pending & STATUSF_IP0) | ||
70 | do_IRQ(0, regs); | ||
71 | else if (pending & STATUSF_IP1) | ||
72 | do_IRQ(1, regs); | ||
73 | else if (pending & STATUSF_IP2) | ||
74 | do_IRQ(2, regs); | ||
75 | else if (pending & STATUSF_IP3) | ||
76 | ll_uart_irq(regs); | ||
77 | else if (pending & STATUSF_IP4) | ||
78 | do_IRQ(4, regs); | ||
79 | else if (pending & STATUSF_IP5) | ||
80 | ll_cpci_irq(regs); | ||
81 | else if (pending & STATUSF_IP6) | ||
82 | ll_mv64340_irq(regs); | ||
83 | else if (pending & STATUSF_IP7) | ||
84 | do_IRQ(7, regs); | ||
85 | else | ||
86 | spurious_interrupt(regs); | ||
87 | } | ||
88 | |||
63 | void __init arch_init_irq(void) | 89 | void __init arch_init_irq(void) |
64 | { | 90 | { |
65 | /* | 91 | /* |
@@ -68,8 +94,6 @@ void __init arch_init_irq(void) | |||
68 | */ | 94 | */ |
69 | clear_c0_status(ST0_IM); | 95 | clear_c0_status(ST0_IM); |
70 | 96 | ||
71 | /* Sets the first-level interrupt dispatcher. */ | ||
72 | set_except_vector(0, ocelot_handle_int); | ||
73 | mips_cpu_irq_init(0); | 97 | mips_cpu_irq_init(0); |
74 | 98 | ||
75 | /* set up the cascading interrupts */ | 99 | /* set up the cascading interrupts */ |
diff --git a/arch/mips/momentum/ocelot_g/Makefile b/arch/mips/momentum/ocelot_g/Makefile index e5f1cb086973..adb5665d40a9 100644 --- a/arch/mips/momentum/ocelot_g/Makefile +++ b/arch/mips/momentum/ocelot_g/Makefile | |||
@@ -2,7 +2,7 @@ | |||
2 | # Makefile for Momentum Computer's Ocelot-G board. | 2 | # Makefile for Momentum Computer's Ocelot-G board. |
3 | # | 3 | # |
4 | 4 | ||
5 | obj-y += int-handler.o irq.o gt-irq.o prom.o reset.o setup.o | 5 | obj-y += irq.o gt-irq.o prom.o reset.o setup.o |
6 | obj-$(CONFIG_KGDB) += dbg_io.o | 6 | obj-$(CONFIG_KGDB) += dbg_io.o |
7 | 7 | ||
8 | EXTRA_AFLAGS := $(CFLAGS) | 8 | EXTRA_AFLAGS := $(CFLAGS) |
diff --git a/arch/mips/momentum/ocelot_g/int-handler.S b/arch/mips/momentum/ocelot_g/int-handler.S deleted file mode 100644 index 772e8f713176..000000000000 --- a/arch/mips/momentum/ocelot_g/int-handler.S +++ /dev/null | |||
@@ -1,131 +0,0 @@ | |||
1 | /* | ||
2 | * Copyright 2001 MontaVista Software Inc. | ||
3 | * Author: jsun@mvista.com or jsun@junsun.net | ||
4 | * | ||
5 | * First-level interrupt dispatcher for ocelot board. | ||
6 | * | ||
7 | * This program is free software; you can redistribute it and/or modify it | ||
8 | * under the terms of the GNU General Public License as published by the | ||
9 | * Free Software Foundation; either version 2 of the License, or (at your | ||
10 | * option) any later version. | ||
11 | */ | ||
12 | #include <asm/asm.h> | ||
13 | #include <asm/mipsregs.h> | ||
14 | #include <asm/addrspace.h> | ||
15 | #include <asm/regdef.h> | ||
16 | #include <asm/stackframe.h> | ||
17 | |||
18 | /* | ||
19 | * first level interrupt dispatcher for ocelot board - | ||
20 | * We check for the timer first, then check PCI ints A and D. | ||
21 | * Then check for serial IRQ and fall through. | ||
22 | */ | ||
23 | .align 5 | ||
24 | NESTED(ocelot_handle_int, PT_SIZE, sp) | ||
25 | SAVE_ALL | ||
26 | CLI | ||
27 | .set at | ||
28 | mfc0 t0, CP0_CAUSE | ||
29 | mfc0 t2, CP0_STATUS | ||
30 | |||
31 | and t0, t2 | ||
32 | |||
33 | andi t1, t0, STATUSF_IP2 /* int0 hardware line */ | ||
34 | bnez t1, ll_pri_enet_irq | ||
35 | andi t1, t0, STATUSF_IP3 /* int1 hardware line */ | ||
36 | bnez t1, ll_sec_enet_irq | ||
37 | andi t1, t0, STATUSF_IP4 /* int2 hardware line */ | ||
38 | bnez t1, ll_uart_irq | ||
39 | andi t1, t0, STATUSF_IP5 /* int3 hardware line */ | ||
40 | bnez t1, ll_cpci_irq | ||
41 | andi t1, t0, STATUSF_IP6 /* int4 hardware line */ | ||
42 | bnez t1, ll_galileo_p0_irq | ||
43 | andi t1, t0, STATUSF_IP7 /* cpu timer */ | ||
44 | bnez t1, ll_cputimer_irq | ||
45 | |||
46 | /* now look at the extended interrupts */ | ||
47 | mfc0 t0, CP0_CAUSE | ||
48 | cfc0 t1, CP0_S1_INTCONTROL | ||
49 | |||
50 | /* shift the mask 8 bits left to line up the bits */ | ||
51 | sll t2, t1, 8 | ||
52 | |||
53 | and t0, t2 | ||
54 | srl t0, t0, 16 | ||
55 | |||
56 | andi t1, t0, STATUSF_IP8 /* int6 hardware line */ | ||
57 | bnez t1, ll_galileo_p1_irq | ||
58 | andi t1, t0, STATUSF_IP9 /* int7 hardware line */ | ||
59 | bnez t1, ll_pmc_irq | ||
60 | andi t1, t0, STATUSF_IP10 /* int8 hardware line */ | ||
61 | bnez t1, ll_cpci_abcd_irq | ||
62 | andi t1, t0, STATUSF_IP11 /* int9 hardware line */ | ||
63 | bnez t1, ll_testpoint_irq | ||
64 | |||
65 | .set reorder | ||
66 | |||
67 | /* wrong alarm or masked ... */ | ||
68 | j spurious_interrupt | ||
69 | nop | ||
70 | END(ocelot_handle_int) | ||
71 | |||
72 | .align 5 | ||
73 | ll_pri_enet_irq: | ||
74 | li a0, 2 | ||
75 | move a1, sp | ||
76 | jal do_IRQ | ||
77 | j ret_from_irq | ||
78 | |||
79 | ll_sec_enet_irq: | ||
80 | li a0, 3 | ||
81 | move a1, sp | ||
82 | jal do_IRQ | ||
83 | j ret_from_irq | ||
84 | |||
85 | ll_uart_irq: | ||
86 | li a0, 4 | ||
87 | move a1, sp | ||
88 | jal do_IRQ | ||
89 | j ret_from_irq | ||
90 | |||
91 | ll_cpci_irq: | ||
92 | li a0, 5 | ||
93 | move a1, sp | ||
94 | jal do_IRQ | ||
95 | j ret_from_irq | ||
96 | |||
97 | ll_galileo_p0_irq: | ||
98 | li a0, 6 | ||
99 | move a1, sp | ||
100 | jal do_IRQ | ||
101 | j ret_from_irq | ||
102 | |||
103 | ll_cputimer_irq: | ||
104 | li a0, 7 | ||
105 | move a1, sp | ||
106 | jal do_IRQ | ||
107 | j ret_from_irq | ||
108 | |||
109 | ll_galileo_p1_irq: | ||
110 | li a0, 8 | ||
111 | move a1, sp | ||
112 | jal do_IRQ | ||
113 | j ret_from_irq | ||
114 | |||
115 | ll_pmc_irq: | ||
116 | li a0, 9 | ||
117 | move a1, sp | ||
118 | jal do_IRQ | ||
119 | j ret_from_irq | ||
120 | |||
121 | ll_cpci_abcd_irq: | ||
122 | li a0, 10 | ||
123 | move a1, sp | ||
124 | jal do_IRQ | ||
125 | j ret_from_irq | ||
126 | |||
127 | ll_testpoint_irq: | ||
128 | li a0, 11 | ||
129 | move a1, sp | ||
130 | jal do_IRQ | ||
131 | j ret_from_irq | ||
diff --git a/arch/mips/momentum/ocelot_g/irq.c b/arch/mips/momentum/ocelot_g/irq.c index 5eb85b164205..7a4a419804f1 100644 --- a/arch/mips/momentum/ocelot_g/irq.c +++ b/arch/mips/momentum/ocelot_g/irq.c | |||
@@ -48,7 +48,41 @@ | |||
48 | #include <asm/mipsregs.h> | 48 | #include <asm/mipsregs.h> |
49 | #include <asm/system.h> | 49 | #include <asm/system.h> |
50 | 50 | ||
51 | extern asmlinkage void ocelot_handle_int(void); | 51 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) |
52 | { | ||
53 | unsigned int pending = read_c0_cause() & read_c0_status(); | ||
54 | |||
55 | if (pending & STATUSF_IP2) | ||
56 | do_IRQ(2, regs); | ||
57 | else if (pending & STATUSF_IP3) | ||
58 | do_IRQ(3, regs); | ||
59 | else if (pending & STATUSF_IP4) | ||
60 | do_IRQ(4, regs); | ||
61 | else if (pending & STATUSF_IP5) | ||
62 | do_IRQ(5, regs); | ||
63 | else if (pending & STATUSF_IP6) | ||
64 | do_IRQ(6, regs); | ||
65 | else if (pending & STATUSF_IP7) | ||
66 | do_IRQ(7, regs); | ||
67 | else { | ||
68 | /* | ||
69 | * Now look at the extended interrupts | ||
70 | */ | ||
71 | pending = (read_c0_cause() & (read_c0_intcontrol() << 8)) >> 16; | ||
72 | |||
73 | if (pending & STATUSF_IP8) | ||
74 | do_IRQ(8, regs); | ||
75 | else if (pending & STATUSF_IP9) | ||
76 | do_IRQ(9, regs); | ||
77 | else if (pending & STATUSF_IP10) | ||
78 | do_IRQ(10, regs); | ||
79 | else if (pending & STATUSF_IP11) | ||
80 | do_IRQ(11, regs); | ||
81 | else | ||
82 | spurious_interrupt(regs); | ||
83 | } | ||
84 | } | ||
85 | |||
52 | extern void gt64240_irq_init(void); | 86 | extern void gt64240_irq_init(void); |
53 | 87 | ||
54 | void __init arch_init_irq(void) | 88 | void __init arch_init_irq(void) |
@@ -60,8 +94,6 @@ void __init arch_init_irq(void) | |||
60 | clear_c0_status(ST0_IM); | 94 | clear_c0_status(ST0_IM); |
61 | local_irq_disable(); | 95 | local_irq_disable(); |
62 | 96 | ||
63 | /* Sets the first-level interrupt dispatcher. */ | ||
64 | set_except_vector(0, ocelot_handle_int); | ||
65 | mips_cpu_irq_init(0); | 97 | mips_cpu_irq_init(0); |
66 | rm7k_cpu_irq_init(8); | 98 | rm7k_cpu_irq_init(8); |
67 | 99 | ||
diff --git a/arch/mips/philips/pnx8550/common/Makefile b/arch/mips/philips/pnx8550/common/Makefile index 6e38f3bc443c..b7c638166e9f 100644 --- a/arch/mips/philips/pnx8550/common/Makefile +++ b/arch/mips/philips/pnx8550/common/Makefile | |||
@@ -22,6 +22,6 @@ | |||
22 | # under Linux. | 22 | # under Linux. |
23 | # | 23 | # |
24 | 24 | ||
25 | obj-y := setup.o prom.o mipsIRQ.o int.o reset.o time.o proc.o platform.o | 25 | obj-y := setup.o prom.o int.o reset.o time.o proc.o platform.o |
26 | obj-$(CONFIG_PCI) += pci.o | 26 | obj-$(CONFIG_PCI) += pci.o |
27 | obj-$(CONFIG_KGDB) += gdb_hook.o | 27 | obj-$(CONFIG_KGDB) += gdb_hook.o |
diff --git a/arch/mips/philips/pnx8550/common/int.c b/arch/mips/philips/pnx8550/common/int.c index c500e2d41f2c..39ee6314f627 100644 --- a/arch/mips/philips/pnx8550/common/int.c +++ b/arch/mips/philips/pnx8550/common/int.c | |||
@@ -38,8 +38,6 @@ | |||
38 | #include <int.h> | 38 | #include <int.h> |
39 | #include <uart.h> | 39 | #include <uart.h> |
40 | 40 | ||
41 | extern asmlinkage void cp0_irqdispatch(void); | ||
42 | |||
43 | static DEFINE_SPINLOCK(irq_lock); | 41 | static DEFINE_SPINLOCK(irq_lock); |
44 | 42 | ||
45 | /* default prio for interrupts */ | 43 | /* default prio for interrupts */ |
@@ -55,7 +53,7 @@ static char gic_prio[PNX8550_INT_GIC_TOTINT] = { | |||
55 | 1 // 70 | 53 | 1 // 70 |
56 | }; | 54 | }; |
57 | 55 | ||
58 | void hw0_irqdispatch(int irq, struct pt_regs *regs) | 56 | static void hw0_irqdispatch(int irq, struct pt_regs *regs) |
59 | { | 57 | { |
60 | /* find out which interrupt */ | 58 | /* find out which interrupt */ |
61 | irq = PNX8550_GIC_VECTOR_0 >> 3; | 59 | irq = PNX8550_GIC_VECTOR_0 >> 3; |
@@ -68,7 +66,7 @@ void hw0_irqdispatch(int irq, struct pt_regs *regs) | |||
68 | } | 66 | } |
69 | 67 | ||
70 | 68 | ||
71 | void timer_irqdispatch(int irq, struct pt_regs *regs) | 69 | static void timer_irqdispatch(int irq, struct pt_regs *regs) |
72 | { | 70 | { |
73 | irq = (0x01c0 & read_c0_config7()) >> 6; | 71 | irq = (0x01c0 & read_c0_config7()) >> 6; |
74 | 72 | ||
@@ -88,6 +86,20 @@ void timer_irqdispatch(int irq, struct pt_regs *regs) | |||
88 | } | 86 | } |
89 | } | 87 | } |
90 | 88 | ||
89 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) | ||
90 | { | ||
91 | unsigned int pending = read_c0_status() & read_c0_cause(); | ||
92 | |||
93 | if (pending & STATUSF_IP2) | ||
94 | do_IRQ(2, regs); | ||
95 | else if (pending & STATUSF_IP7) { | ||
96 | if (read_c0_config7() & 0x01c0) | ||
97 | timer_irqdispatch(7, regs); | ||
98 | } | ||
99 | |||
100 | spurious_interrupt(regs); | ||
101 | } | ||
102 | |||
91 | static inline void modify_cp0_intmask(unsigned clr_mask, unsigned set_mask) | 103 | static inline void modify_cp0_intmask(unsigned clr_mask, unsigned set_mask) |
92 | { | 104 | { |
93 | unsigned long status = read_c0_status(); | 105 | unsigned long status = read_c0_status(); |
@@ -223,9 +235,6 @@ void __init arch_init_irq(void) | |||
223 | int i; | 235 | int i; |
224 | int configPR; | 236 | int configPR; |
225 | 237 | ||
226 | /* init of cp0 interrupts */ | ||
227 | set_except_vector(0, cp0_irqdispatch); | ||
228 | |||
229 | for (i = 0; i < PNX8550_INT_CP0_TOTINT; i++) { | 238 | for (i = 0; i < PNX8550_INT_CP0_TOTINT; i++) { |
230 | irq_desc[i].handler = &level_irq_type; | 239 | irq_desc[i].handler = &level_irq_type; |
231 | pnx8550_ack(i); /* mask the irq just in case */ | 240 | pnx8550_ack(i); /* mask the irq just in case */ |
diff --git a/arch/mips/philips/pnx8550/common/mipsIRQ.S b/arch/mips/philips/pnx8550/common/mipsIRQ.S deleted file mode 100644 index e049a719f83d..000000000000 --- a/arch/mips/philips/pnx8550/common/mipsIRQ.S +++ /dev/null | |||
@@ -1,77 +0,0 @@ | |||
1 | /* | ||
2 | * Copyright (c) 2002 Philips, Inc. All rights. | ||
3 | * Copyright (c) 2002 Red Hat, Inc. All rights. | ||
4 | * | ||
5 | * This software may be freely redistributed under the terms of the | ||
6 | * GNU General Public License. | ||
7 | * | ||
8 | * You should have received a copy of the GNU General Public License | ||
9 | * along with this program; if not, write to the Free Software | ||
10 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | ||
11 | * | ||
12 | * Based upon arch/mips/galileo-boards/ev64240/int-handler.S | ||
13 | * | ||
14 | */ | ||
15 | #include <asm/asm.h> | ||
16 | #include <asm/mipsregs.h> | ||
17 | #include <asm/addrspace.h> | ||
18 | #include <asm/regdef.h> | ||
19 | #include <asm/stackframe.h> | ||
20 | |||
21 | /* | ||
22 | * cp0_irqdispatch | ||
23 | * | ||
24 | * Code to handle in-core interrupt exception. | ||
25 | */ | ||
26 | |||
27 | .align 5 | ||
28 | .set reorder | ||
29 | .set noat | ||
30 | NESTED(cp0_irqdispatch, PT_SIZE, sp) | ||
31 | SAVE_ALL | ||
32 | CLI | ||
33 | .set at | ||
34 | mfc0 t0,CP0_CAUSE | ||
35 | mfc0 t2,CP0_STATUS | ||
36 | |||
37 | and t0,t2 | ||
38 | |||
39 | andi t1,t0,STATUSF_IP2 /* int0 hardware line */ | ||
40 | bnez t1,ll_hw0_irq | ||
41 | nop | ||
42 | |||
43 | andi t1,t0,STATUSF_IP7 /* int5 hardware line */ | ||
44 | bnez t1,ll_timer_irq | ||
45 | nop | ||
46 | |||
47 | /* wrong alarm or masked ... */ | ||
48 | |||
49 | jal spurious_interrupt | ||
50 | nop | ||
51 | j ret_from_irq | ||
52 | END(cp0_irqdispatch) | ||
53 | |||
54 | .align 5 | ||
55 | .set reorder | ||
56 | ll_hw0_irq: | ||
57 | li a0,2 | ||
58 | move a1,sp | ||
59 | jal hw0_irqdispatch | ||
60 | nop | ||
61 | j ret_from_irq | ||
62 | nop | ||
63 | |||
64 | .align 5 | ||
65 | .set reorder | ||
66 | ll_timer_irq: | ||
67 | mfc0 t3,CP0_CONFIG,7 | ||
68 | andi t4,t3,0x01c0 | ||
69 | beqz t4,ll_timer_out | ||
70 | nop | ||
71 | li a0,7 | ||
72 | move a1,sp | ||
73 | jal timer_irqdispatch | ||
74 | nop | ||
75 | |||
76 | ll_timer_out: j ret_from_irq | ||
77 | nop | ||
diff --git a/arch/mips/pmc-sierra/yosemite/Makefile b/arch/mips/pmc-sierra/yosemite/Makefile index ae96a71a3089..e931e0d44229 100644 --- a/arch/mips/pmc-sierra/yosemite/Makefile +++ b/arch/mips/pmc-sierra/yosemite/Makefile | |||
@@ -2,7 +2,7 @@ | |||
2 | # Makefile for the PMC-Sierra Titan | 2 | # Makefile for the PMC-Sierra Titan |
3 | # | 3 | # |
4 | 4 | ||
5 | obj-y += irq-handler.o irq.o i2c-yosemite.o prom.o py-console.o setup.o | 5 | obj-y += irq.o i2c-yosemite.o prom.o py-console.o setup.o |
6 | 6 | ||
7 | obj-$(CONFIG_KGDB) += dbg_io.o | 7 | obj-$(CONFIG_KGDB) += dbg_io.o |
8 | obj-$(CONFIG_SMP) += smp.o | 8 | obj-$(CONFIG_SMP) += smp.o |
diff --git a/arch/mips/pmc-sierra/yosemite/irq-handler.S b/arch/mips/pmc-sierra/yosemite/irq-handler.S deleted file mode 100644 index 33b9c40d4f5c..000000000000 --- a/arch/mips/pmc-sierra/yosemite/irq-handler.S +++ /dev/null | |||
@@ -1,93 +0,0 @@ | |||
1 | /* | ||
2 | * Copyright 2003, 04 PMC-Sierra Inc. | ||
3 | * Author: Manish Lachwani (lachwani@pmc-sierra.com | ||
4 | * Copyright 2004 Ralf Baechle (ralf@linux-mips.org) | ||
5 | * | ||
6 | * First-level interrupt router for the PMC-Sierra Titan board | ||
7 | * | ||
8 | * This program is free software; you can redistribute it and/or modify it | ||
9 | * under the terms of the GNU General Public License as published by the | ||
10 | * Free Software Foundation; either version 2 of the License, or (at your | ||
11 | * option) any later version. | ||
12 | * | ||
13 | * Titan supports Hypertransport or PCI but not both. Hence, one interrupt | ||
14 | * line is shared between the PCI slot A and Hypertransport. This is the | ||
15 | * Processor INTB #0. | ||
16 | */ | ||
17 | |||
18 | #include <linux/config.h> | ||
19 | #include <asm/asm.h> | ||
20 | #include <asm/mipsregs.h> | ||
21 | #include <asm/addrspace.h> | ||
22 | #include <asm/regdef.h> | ||
23 | #include <asm/stackframe.h> | ||
24 | |||
25 | .align 5 | ||
26 | NESTED(titan_handle_int, PT_SIZE, sp) | ||
27 | SAVE_ALL | ||
28 | CLI | ||
29 | .set at | ||
30 | .set noreorder | ||
31 | la ra, ret_from_irq | ||
32 | mfc0 t0, CP0_CAUSE | ||
33 | mfc0 t2, CP0_STATUS | ||
34 | |||
35 | and t0, t2 | ||
36 | |||
37 | andi t2, t0, STATUSF_IP7 /* INTB5 hardware line */ | ||
38 | bnez t2, ll_timer_irq /* Timer */ | ||
39 | andi t1, t0, STATUSF_IP2 /* INTB0 hardware line */ | ||
40 | bnez t1, ll_pcia_irq /* 64-bit PCI */ | ||
41 | andi t2, t0, STATUSF_IP3 /* INTB1 hardware line */ | ||
42 | bnez t2, ll_pcib_irq /* second 64-bit PCI slot */ | ||
43 | andi t1, t0, STATUSF_IP4 /* INTB2 hardware line */ | ||
44 | bnez t1, ll_duart_irq /* UART */ | ||
45 | andi t2, t0, STATUSF_IP5 /* SMP inter-core interrupts */ | ||
46 | bnez t2, ll_smp_irq | ||
47 | andi t1, t0, STATUSF_IP6 | ||
48 | bnez t1, ll_ht_irq /* Hypertransport */ | ||
49 | |||
50 | move a0, sp | ||
51 | j do_extended_irq | ||
52 | END(titan_handle_int) | ||
53 | |||
54 | .set reorder | ||
55 | .align 5 | ||
56 | |||
57 | ll_pcia_irq: | ||
58 | li a0, 2 | ||
59 | move a1, sp | ||
60 | #ifdef CONFIG_HYPERTRANSPORT | ||
61 | j ll_ht_smp_irq_handler | ||
62 | #else | ||
63 | j do_IRQ | ||
64 | #endif | ||
65 | |||
66 | ll_pcib_irq: | ||
67 | li a0, 3 | ||
68 | move a1, sp | ||
69 | j do_IRQ | ||
70 | |||
71 | ll_duart_irq: | ||
72 | li a0, 4 | ||
73 | move a1, sp | ||
74 | j do_IRQ | ||
75 | |||
76 | ll_smp_irq: | ||
77 | li a0, 5 | ||
78 | move a1, sp | ||
79 | #ifdef CONFIG_SMP | ||
80 | j titan_mailbox_irq | ||
81 | #else | ||
82 | j do_IRQ | ||
83 | #endif | ||
84 | |||
85 | ll_ht_irq: | ||
86 | li a0, 6 | ||
87 | move a1, sp | ||
88 | j ll_ht_smp_irq_handler | ||
89 | |||
90 | ll_timer_irq: | ||
91 | li a0, 7 | ||
92 | move a1, sp | ||
93 | j do_IRQ | ||
diff --git a/arch/mips/pmc-sierra/yosemite/irq.c b/arch/mips/pmc-sierra/yosemite/irq.c index f4e2897d9bf7..a1f524fc4c10 100644 --- a/arch/mips/pmc-sierra/yosemite/irq.c +++ b/arch/mips/pmc-sierra/yosemite/irq.c | |||
@@ -2,6 +2,8 @@ | |||
2 | * Copyright (C) 2003 PMC-Sierra Inc. | 2 | * Copyright (C) 2003 PMC-Sierra Inc. |
3 | * Author: Manish Lachwani (lachwani@pmc-sierra.com) | 3 | * Author: Manish Lachwani (lachwani@pmc-sierra.com) |
4 | * | 4 | * |
5 | * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org) | ||
6 | * | ||
5 | * This program is free software; you can redistribute it and/or modify it | 7 | * This program is free software; you can redistribute it and/or modify it |
6 | * under the terms of the GNU General Public License as published by the | 8 | * under the terms of the GNU General Public License as published by the |
7 | * Free Software Foundation; either version 2 of the License, or (at your | 9 | * Free Software Foundation; either version 2 of the License, or (at your |
@@ -55,7 +57,6 @@ | |||
55 | #define HYPERTRANSPORT_INTC 0x7a /* INTC# */ | 57 | #define HYPERTRANSPORT_INTC 0x7a /* INTC# */ |
56 | #define HYPERTRANSPORT_INTD 0x7b /* INTD# */ | 58 | #define HYPERTRANSPORT_INTD 0x7b /* INTD# */ |
57 | 59 | ||
58 | extern asmlinkage void titan_handle_int(void); | ||
59 | extern void jaguar_mailbox_irq(struct pt_regs *); | 60 | extern void jaguar_mailbox_irq(struct pt_regs *); |
60 | 61 | ||
61 | /* | 62 | /* |
@@ -125,6 +126,35 @@ asmlinkage void do_extended_irq(struct pt_regs *regs) | |||
125 | 126 | ||
126 | } | 127 | } |
127 | 128 | ||
129 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) | ||
130 | { | ||
131 | unsigned int cause = read_c0_cause(); | ||
132 | unsigned int status = read_c0_status(); | ||
133 | unsigned int pending = cause & status; | ||
134 | |||
135 | if (pending & STATUSF_IP7) { | ||
136 | do_IRQ(7, regs); | ||
137 | } else if (pending & STATUSF_IP2) { | ||
138 | #ifdef CONFIG_HYPERTRANSPORT | ||
139 | ll_ht_smp_irq_handler(2, regs); | ||
140 | #else | ||
141 | do_IRQ(2, regs); | ||
142 | #endif | ||
143 | } else if (pending & STATUSF_IP3) { | ||
144 | do_IRQ(3, regs); | ||
145 | } else if (pending & STATUSF_IP4) { | ||
146 | do_IRQ(4, regs); | ||
147 | } else if (pending & STATUSF_IP5) { | ||
148 | #ifdef CONFIG_SMP | ||
149 | titan_mailbox_irq(regs); | ||
150 | #else | ||
151 | do_IRQ(5, regs); | ||
152 | #endif | ||
153 | } else if (pending & STATUSF_IP6) { | ||
154 | do_IRQ(4, regs); | ||
155 | } | ||
156 | } | ||
157 | |||
128 | #ifdef CONFIG_KGDB | 158 | #ifdef CONFIG_KGDB |
129 | extern void init_second_port(void); | 159 | extern void init_second_port(void); |
130 | #endif | 160 | #endif |
@@ -136,7 +166,6 @@ void __init arch_init_irq(void) | |||
136 | { | 166 | { |
137 | clear_c0_status(ST0_IM); | 167 | clear_c0_status(ST0_IM); |
138 | 168 | ||
139 | set_except_vector(0, titan_handle_int); | ||
140 | mips_cpu_irq_init(0); | 169 | mips_cpu_irq_init(0); |
141 | rm7k_cpu_irq_init(8); | 170 | rm7k_cpu_irq_init(8); |
142 | rm9k_cpu_irq_init(12); | 171 | rm9k_cpu_irq_init(12); |
diff --git a/arch/mips/qemu/Makefile b/arch/mips/qemu/Makefile index 6a8e8bcef552..730f459f3e99 100644 --- a/arch/mips/qemu/Makefile +++ b/arch/mips/qemu/Makefile | |||
@@ -2,6 +2,6 @@ | |||
2 | # Makefile for Qemu specific kernel interface routines under Linux. | 2 | # Makefile for Qemu specific kernel interface routines under Linux. |
3 | # | 3 | # |
4 | 4 | ||
5 | obj-y = q-firmware.o q-int.o q-irq.o q-mem.o q-setup.o | 5 | obj-y = q-firmware.o q-irq.o q-mem.o q-setup.o |
6 | 6 | ||
7 | obj-$(CONFIG_SMP) += q-smp.o | 7 | obj-$(CONFIG_SMP) += q-smp.o |
diff --git a/arch/mips/qemu/q-int.S b/arch/mips/qemu/q-int.S deleted file mode 100644 index 6e3dfe5eb14b..000000000000 --- a/arch/mips/qemu/q-int.S +++ /dev/null | |||
@@ -1,17 +0,0 @@ | |||
1 | /* | ||
2 | * Qemu interrupt handler code. | ||
3 | * | ||
4 | * Copyright (C) 2005 by Ralf Baechle | ||
5 | */ | ||
6 | #include <asm/asm.h> | ||
7 | #include <asm/regdef.h> | ||
8 | #include <asm/stackframe.h> | ||
9 | |||
10 | .align 5 | ||
11 | NESTED(qemu_handle_int, PT_SIZE, sp) | ||
12 | SAVE_ALL | ||
13 | CLI | ||
14 | move a0, sp | ||
15 | PTR_LA ra, ret_from_irq | ||
16 | j do_qemu_int | ||
17 | END(qemu_handle_int) | ||
diff --git a/arch/mips/qemu/q-irq.c b/arch/mips/qemu/q-irq.c index 2c4e0704ff10..3352374c4c7d 100644 --- a/arch/mips/qemu/q-irq.c +++ b/arch/mips/qemu/q-irq.c | |||
@@ -9,7 +9,7 @@ | |||
9 | 9 | ||
10 | extern asmlinkage void qemu_handle_int(void); | 10 | extern asmlinkage void qemu_handle_int(void); |
11 | 11 | ||
12 | asmlinkage void do_qemu_int(struct pt_regs *regs) | 12 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) |
13 | { | 13 | { |
14 | unsigned int pending = read_c0_status() & read_c0_cause(); | 14 | unsigned int pending = read_c0_status() & read_c0_cause(); |
15 | 15 | ||
@@ -29,7 +29,6 @@ asmlinkage void do_qemu_int(struct pt_regs *regs) | |||
29 | 29 | ||
30 | void __init arch_init_irq(void) | 30 | void __init arch_init_irq(void) |
31 | { | 31 | { |
32 | set_except_vector(0, qemu_handle_int); | ||
33 | mips_hpt_frequency = QEMU_C0_COUNTER_CLOCK; /* 100MHz */ | 32 | mips_hpt_frequency = QEMU_C0_COUNTER_CLOCK; /* 100MHz */ |
34 | 33 | ||
35 | init_i8259_irqs(); | 34 | init_i8259_irqs(); |
diff --git a/arch/mips/sgi-ip22/Makefile b/arch/mips/sgi-ip22/Makefile index eb0820fe50bd..6aa4c0cd169c 100644 --- a/arch/mips/sgi-ip22/Makefile +++ b/arch/mips/sgi-ip22/Makefile | |||
@@ -3,7 +3,7 @@ | |||
3 | # under Linux. | 3 | # under Linux. |
4 | # | 4 | # |
5 | 5 | ||
6 | obj-y += ip22-mc.o ip22-hpc.o ip22-int.o ip22-irq.o ip22-berr.o \ | 6 | obj-y += ip22-mc.o ip22-hpc.o ip22-int.o ip22-berr.o \ |
7 | ip22-time.o ip22-nvram.o ip22-reset.o ip22-setup.o | 7 | ip22-time.o ip22-nvram.o ip22-reset.o ip22-setup.o |
8 | 8 | ||
9 | obj-$(CONFIG_EISA) += ip22-eisa.o | 9 | obj-$(CONFIG_EISA) += ip22-eisa.o |
diff --git a/arch/mips/sgi-ip22/ip22-int.c b/arch/mips/sgi-ip22/ip22-int.c index d16fb43b1a93..fc6a7e2b189c 100644 --- a/arch/mips/sgi-ip22/ip22-int.c +++ b/arch/mips/sgi-ip22/ip22-int.c | |||
@@ -37,7 +37,6 @@ static char lc1msk_to_irqnr[256]; | |||
37 | static char lc2msk_to_irqnr[256]; | 37 | static char lc2msk_to_irqnr[256]; |
38 | static char lc3msk_to_irqnr[256]; | 38 | static char lc3msk_to_irqnr[256]; |
39 | 39 | ||
40 | extern asmlinkage void indyIRQ(void); | ||
41 | extern int ip22_eisa_init(void); | 40 | extern int ip22_eisa_init(void); |
42 | 41 | ||
43 | static void enable_local0_irq(unsigned int irq) | 42 | static void enable_local0_irq(unsigned int irq) |
@@ -224,7 +223,7 @@ static struct hw_interrupt_type ip22_local3_irq_type = { | |||
224 | .end = end_local3_irq, | 223 | .end = end_local3_irq, |
225 | }; | 224 | }; |
226 | 225 | ||
227 | void indy_local0_irqdispatch(struct pt_regs *regs) | 226 | static void indy_local0_irqdispatch(struct pt_regs *regs) |
228 | { | 227 | { |
229 | u8 mask = sgint->istat0 & sgint->imask0; | 228 | u8 mask = sgint->istat0 & sgint->imask0; |
230 | u8 mask2; | 229 | u8 mask2; |
@@ -242,7 +241,7 @@ void indy_local0_irqdispatch(struct pt_regs *regs) | |||
242 | return; | 241 | return; |
243 | } | 242 | } |
244 | 243 | ||
245 | void indy_local1_irqdispatch(struct pt_regs *regs) | 244 | static void indy_local1_irqdispatch(struct pt_regs *regs) |
246 | { | 245 | { |
247 | u8 mask = sgint->istat1 & sgint->imask1; | 246 | u8 mask = sgint->istat1 & sgint->imask1; |
248 | u8 mask2; | 247 | u8 mask2; |
@@ -262,7 +261,7 @@ void indy_local1_irqdispatch(struct pt_regs *regs) | |||
262 | 261 | ||
263 | extern void ip22_be_interrupt(int irq, struct pt_regs *regs); | 262 | extern void ip22_be_interrupt(int irq, struct pt_regs *regs); |
264 | 263 | ||
265 | void indy_buserror_irq(struct pt_regs *regs) | 264 | static void indy_buserror_irq(struct pt_regs *regs) |
266 | { | 265 | { |
267 | int irq = SGI_BUSERR_IRQ; | 266 | int irq = SGI_BUSERR_IRQ; |
268 | 267 | ||
@@ -307,6 +306,56 @@ static struct irqaction map1_cascade = { | |||
307 | #define SGI_INTERRUPTS SGINT_LOCAL3 | 306 | #define SGI_INTERRUPTS SGINT_LOCAL3 |
308 | #endif | 307 | #endif |
309 | 308 | ||
309 | extern void indy_r4k_timer_interrupt(struct pt_regs *regs); | ||
310 | extern void indy_8254timer_irq(struct pt_regs *regs); | ||
311 | |||
312 | /* | ||
313 | * IRQs on the INDY look basically (barring software IRQs which we don't use | ||
314 | * at all) like: | ||
315 | * | ||
316 | * MIPS IRQ Source | ||
317 | * -------- ------ | ||
318 | * 0 Software (ignored) | ||
319 | * 1 Software (ignored) | ||
320 | * 2 Local IRQ level zero | ||
321 | * 3 Local IRQ level one | ||
322 | * 4 8254 Timer zero | ||
323 | * 5 8254 Timer one | ||
324 | * 6 Bus Error | ||
325 | * 7 R4k timer (what we use) | ||
326 | * | ||
327 | * We handle the IRQ according to _our_ priority which is: | ||
328 | * | ||
329 | * Highest ---- R4k Timer | ||
330 | * Local IRQ zero | ||
331 | * Local IRQ one | ||
332 | * Bus Error | ||
333 | * 8254 Timer zero | ||
334 | * Lowest ---- 8254 Timer one | ||
335 | * | ||
336 | * then we just return, if multiple IRQs are pending then we will just take | ||
337 | * another exception, big deal. | ||
338 | */ | ||
339 | |||
340 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) | ||
341 | { | ||
342 | unsigned int pending = read_c0_cause(); | ||
343 | |||
344 | /* | ||
345 | * First we check for r4k counter/timer IRQ. | ||
346 | */ | ||
347 | if (pending & CAUSEF_IP7) | ||
348 | indy_r4k_timer_interrupt(regs); | ||
349 | else if (pending & CAUSEF_IP2) | ||
350 | indy_local0_irqdispatch(regs); | ||
351 | else if (pending & CAUSEF_IP3) | ||
352 | indy_local1_irqdispatch(regs); | ||
353 | else if (pending & CAUSEF_IP6) | ||
354 | indy_buserror_irq(regs); | ||
355 | else if (pending & (CAUSEF_IP4 | CAUSEF_IP5)) | ||
356 | indy_8254timer_irq(regs); | ||
357 | } | ||
358 | |||
310 | extern void mips_cpu_irq_init(unsigned int irq_base); | 359 | extern void mips_cpu_irq_init(unsigned int irq_base); |
311 | 360 | ||
312 | void __init arch_init_irq(void) | 361 | void __init arch_init_irq(void) |
@@ -369,8 +418,6 @@ void __init arch_init_irq(void) | |||
369 | sgint->cmeimask0 = 0; | 418 | sgint->cmeimask0 = 0; |
370 | sgint->cmeimask1 = 0; | 419 | sgint->cmeimask1 = 0; |
371 | 420 | ||
372 | set_except_vector(0, indyIRQ); | ||
373 | |||
374 | /* init CPU irqs */ | 421 | /* init CPU irqs */ |
375 | mips_cpu_irq_init(SGINT_CPU); | 422 | mips_cpu_irq_init(SGINT_CPU); |
376 | 423 | ||
diff --git a/arch/mips/sgi-ip22/ip22-irq.S b/arch/mips/sgi-ip22/ip22-irq.S deleted file mode 100644 index 6ccbd9e1d967..000000000000 --- a/arch/mips/sgi-ip22/ip22-irq.S +++ /dev/null | |||
@@ -1,118 +0,0 @@ | |||
1 | /* | ||
2 | * ip22-irq.S: Interrupt exception dispatch code for FullHouse and | ||
3 | * Guiness. | ||
4 | * | ||
5 | * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) | ||
6 | */ | ||
7 | |||
8 | #include <asm/asm.h> | ||
9 | #include <asm/mipsregs.h> | ||
10 | #include <asm/regdef.h> | ||
11 | #include <asm/stackframe.h> | ||
12 | |||
13 | /* A lot of complication here is taken away because: | ||
14 | * | ||
15 | * 1) We handle one interrupt and return, sitting in a loop and moving across | ||
16 | * all the pending IRQ bits in the cause register is _NOT_ the answer, the | ||
17 | * common case is one pending IRQ so optimize in that direction. | ||
18 | * | ||
19 | * 2) We need not check against bits in the status register IRQ mask, that | ||
20 | * would make this routine slow as hell. | ||
21 | * | ||
22 | * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in | ||
23 | * between like BSD spl() brain-damage. | ||
24 | * | ||
25 | * Furthermore, the IRQs on the INDY look basically (barring software IRQs | ||
26 | * which we don't use at all) like: | ||
27 | * | ||
28 | * MIPS IRQ Source | ||
29 | * -------- ------ | ||
30 | * 0 Software (ignored) | ||
31 | * 1 Software (ignored) | ||
32 | * 2 Local IRQ level zero | ||
33 | * 3 Local IRQ level one | ||
34 | * 4 8254 Timer zero | ||
35 | * 5 8254 Timer one | ||
36 | * 6 Bus Error | ||
37 | * 7 R4k timer (what we use) | ||
38 | * | ||
39 | * We handle the IRQ according to _our_ priority which is: | ||
40 | * | ||
41 | * Highest ---- R4k Timer | ||
42 | * Local IRQ zero | ||
43 | * Local IRQ one | ||
44 | * Bus Error | ||
45 | * 8254 Timer zero | ||
46 | * Lowest ---- 8254 Timer one | ||
47 | * | ||
48 | * then we just return, if multiple IRQs are pending then we will just take | ||
49 | * another exception, big deal. | ||
50 | */ | ||
51 | |||
52 | .text | ||
53 | .set noreorder | ||
54 | .set noat | ||
55 | .align 5 | ||
56 | NESTED(indyIRQ, PT_SIZE, sp) | ||
57 | SAVE_ALL | ||
58 | CLI | ||
59 | .set at | ||
60 | mfc0 s0, CP0_CAUSE # get irq mask | ||
61 | |||
62 | /* First we check for r4k counter/timer IRQ. */ | ||
63 | andi a0, s0, CAUSEF_IP7 | ||
64 | beq a0, zero, 1f | ||
65 | andi a0, s0, CAUSEF_IP2 # delay slot, check local level zero | ||
66 | |||
67 | /* Wheee, a timer interrupt. */ | ||
68 | jal indy_r4k_timer_interrupt | ||
69 | move a0, sp # delay slot | ||
70 | j ret_from_irq | ||
71 | nop # delay slot | ||
72 | |||
73 | 1: | ||
74 | beq a0, zero, 1f | ||
75 | andi a0, s0, CAUSEF_IP3 # delay slot, check local level one | ||
76 | |||
77 | /* Wheee, local level zero interrupt. */ | ||
78 | jal indy_local0_irqdispatch | ||
79 | move a0, sp # delay slot | ||
80 | |||
81 | j ret_from_irq | ||
82 | nop # delay slot | ||
83 | |||
84 | 1: | ||
85 | beq a0, zero, 1f | ||
86 | andi a0, s0, CAUSEF_IP6 # delay slot, check bus error | ||
87 | |||
88 | /* Wheee, local level one interrupt. */ | ||
89 | jal indy_local1_irqdispatch | ||
90 | move a0, sp # delay slot | ||
91 | j ret_from_irq | ||
92 | nop # delay slot | ||
93 | |||
94 | 1: | ||
95 | beq a0, zero, 1f | ||
96 | andi a0, s0, (CAUSEF_IP4 | CAUSEF_IP5) # delay slot | ||
97 | |||
98 | /* Wheee, an asynchronous bus error... */ | ||
99 | jal indy_buserror_irq | ||
100 | move a0, sp # delay slot | ||
101 | j ret_from_irq | ||
102 | nop # delay slot | ||
103 | |||
104 | 1: | ||
105 | /* Here by mistake? It is possible, that by the time we take | ||
106 | * the exception the IRQ pin goes low, so just leave if this | ||
107 | * is the case. | ||
108 | */ | ||
109 | beq a0, zero, 1f | ||
110 | nop # delay slot | ||
111 | |||
112 | /* Must be one of the 8254 timers... */ | ||
113 | jal indy_8254timer_irq | ||
114 | move a0, sp # delay slot | ||
115 | 1: | ||
116 | j ret_from_irq | ||
117 | nop # delay slot | ||
118 | END(indyIRQ) | ||
diff --git a/arch/mips/sgi-ip27/Makefile b/arch/mips/sgi-ip27/Makefile index 4ba340780c35..686ba14e2882 100644 --- a/arch/mips/sgi-ip27/Makefile +++ b/arch/mips/sgi-ip27/Makefile | |||
@@ -2,7 +2,7 @@ | |||
2 | # Makefile for the IP27 specific kernel interface routines under Linux. | 2 | # Makefile for the IP27 specific kernel interface routines under Linux. |
3 | # | 3 | # |
4 | 4 | ||
5 | obj-y := ip27-berr.o ip27-console.o ip27-irq.o ip27-init.o ip27-irq-glue.o \ | 5 | obj-y := ip27-berr.o ip27-console.o ip27-irq.o ip27-init.o \ |
6 | ip27-klconfig.o ip27-klnuma.o ip27-memory.o ip27-nmi.o ip27-reset.o \ | 6 | ip27-klconfig.o ip27-klnuma.o ip27-memory.o ip27-nmi.o ip27-reset.o \ |
7 | ip27-timer.o ip27-hubio.o ip27-xtalk.o | 7 | ip27-timer.o ip27-hubio.o ip27-xtalk.o |
8 | 8 | ||
diff --git a/arch/mips/sgi-ip27/TODO b/arch/mips/sgi-ip27/TODO index 32106131b0d0..19f1512c8f2e 100644 --- a/arch/mips/sgi-ip27/TODO +++ b/arch/mips/sgi-ip27/TODO | |||
@@ -9,10 +9,6 @@ ip27-init.c:find_lbaord_real. DONE | |||
9 | in irix? | 9 | in irix? |
10 | 6. Investigate why things do not work without the setup_test() call | 10 | 6. Investigate why things do not work without the setup_test() call |
11 | being invoked on all nodes in ip27-memory.c. | 11 | being invoked on all nodes in ip27-memory.c. |
12 | 7. Too many CLIs in the locore handlers : | ||
13 | For the low level handlers set up by set_except_vector(), | ||
14 | __tlb_refill_debug_tramp, __xtlb_refill_debug_tramp and cacheerror, | ||
15 | investigate whether the code should do CLI, STI or KMODE. | ||
16 | 8. Too many do_page_faults invoked - investigate. | 12 | 8. Too many do_page_faults invoked - investigate. |
17 | 9. start_thread must turn off UX64 ... and define tlb_refill_debug. | 13 | 9. start_thread must turn off UX64 ... and define tlb_refill_debug. |
18 | 10. Need a bad pmd table, bad pte table. __bad_pmd_table/__bad_pagetable | 14 | 10. Need a bad pmd table, bad pte table. __bad_pmd_table/__bad_pagetable |
diff --git a/arch/mips/sgi-ip27/ip27-irq-glue.S b/arch/mips/sgi-ip27/ip27-irq-glue.S deleted file mode 100644 index c304df715e0a..000000000000 --- a/arch/mips/sgi-ip27/ip27-irq-glue.S +++ /dev/null | |||
@@ -1,45 +0,0 @@ | |||
1 | /* | ||
2 | * This file is subject to the terms and conditions of the GNU General Public | ||
3 | * License. See the file "COPYING" in the main directory of this archive | ||
4 | * for more details. | ||
5 | * | ||
6 | * Copyright (C) 1999 Ralf Baechle | ||
7 | * Copyright (C) 1999 Silicon Graphics, Inc. | ||
8 | */ | ||
9 | #include <asm/asm.h> | ||
10 | #include <asm/mipsregs.h> | ||
11 | #include <asm/regdef.h> | ||
12 | #include <asm/stackframe.h> | ||
13 | |||
14 | .text | ||
15 | .align 5 | ||
16 | NESTED(ip27_irq, PT_SIZE, sp) | ||
17 | SAVE_ALL | ||
18 | CLI | ||
19 | |||
20 | mfc0 s0, CP0_CAUSE | ||
21 | mfc0 t0, CP0_STATUS | ||
22 | and s0, t0 | ||
23 | move a0, sp | ||
24 | PTR_LA ra, ret_from_irq | ||
25 | |||
26 | /* First check for RT interrupt. */ | ||
27 | andi t0, s0, CAUSEF_IP4 | ||
28 | bnez t0, ip4 | ||
29 | andi t0, s0, CAUSEF_IP2 | ||
30 | bnez t0, ip2 | ||
31 | andi t0, s0, CAUSEF_IP3 | ||
32 | bnez t0, ip3 | ||
33 | andi t0, s0, CAUSEF_IP5 | ||
34 | bnez t0, ip5 | ||
35 | andi t0, s0, CAUSEF_IP6 | ||
36 | bnez t0, ip6 | ||
37 | j ra | ||
38 | |||
39 | ip2: j ip27_do_irq_mask0 # PI_INT_PEND_0 or CC_PEND_{A|B} | ||
40 | ip3: j ip27_do_irq_mask1 # PI_INT_PEND_1 | ||
41 | ip4: j ip27_rt_timer_interrupt | ||
42 | ip5: j ip27_prof_timer | ||
43 | ip6: j ip27_hub_error | ||
44 | |||
45 | END(ip27_irq) | ||
diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c index 2854ac4c9be1..2e643d2f51cb 100644 --- a/arch/mips/sgi-ip27/ip27-irq.c +++ b/arch/mips/sgi-ip27/ip27-irq.c | |||
@@ -130,7 +130,7 @@ static int ms1bit(unsigned long x) | |||
130 | * Kanoj 05.13.00 | 130 | * Kanoj 05.13.00 |
131 | */ | 131 | */ |
132 | 132 | ||
133 | void ip27_do_irq_mask0(struct pt_regs *regs) | 133 | static void ip27_do_irq_mask0(struct pt_regs *regs) |
134 | { | 134 | { |
135 | int irq, swlevel; | 135 | int irq, swlevel; |
136 | hubreg_t pend0, mask0; | 136 | hubreg_t pend0, mask0; |
@@ -171,7 +171,7 @@ void ip27_do_irq_mask0(struct pt_regs *regs) | |||
171 | LOCAL_HUB_L(PI_INT_PEND0); | 171 | LOCAL_HUB_L(PI_INT_PEND0); |
172 | } | 172 | } |
173 | 173 | ||
174 | void ip27_do_irq_mask1(struct pt_regs *regs) | 174 | static void ip27_do_irq_mask1(struct pt_regs *regs) |
175 | { | 175 | { |
176 | int irq, swlevel; | 176 | int irq, swlevel; |
177 | hubreg_t pend1, mask1; | 177 | hubreg_t pend1, mask1; |
@@ -196,12 +196,12 @@ void ip27_do_irq_mask1(struct pt_regs *regs) | |||
196 | LOCAL_HUB_L(PI_INT_PEND1); | 196 | LOCAL_HUB_L(PI_INT_PEND1); |
197 | } | 197 | } |
198 | 198 | ||
199 | void ip27_prof_timer(struct pt_regs *regs) | 199 | static void ip27_prof_timer(struct pt_regs *regs) |
200 | { | 200 | { |
201 | panic("CPU %d got a profiling interrupt", smp_processor_id()); | 201 | panic("CPU %d got a profiling interrupt", smp_processor_id()); |
202 | } | 202 | } |
203 | 203 | ||
204 | void ip27_hub_error(struct pt_regs *regs) | 204 | static void ip27_hub_error(struct pt_regs *regs) |
205 | { | 205 | { |
206 | panic("CPU %d got a hub error interrupt", smp_processor_id()); | 206 | panic("CPU %d got a hub error interrupt", smp_processor_id()); |
207 | } | 207 | } |
@@ -421,9 +421,26 @@ int __devinit request_bridge_irq(struct bridge_controller *bc) | |||
421 | return irq; | 421 | return irq; |
422 | } | 422 | } |
423 | 423 | ||
424 | extern void ip27_rt_timer_interrupt(struct pt_regs *regs); | ||
425 | |||
426 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) | ||
427 | { | ||
428 | unsigned long pending = read_c0_cause() & read_c0_status(); | ||
429 | |||
430 | if (pending & CAUSEF_IP4) | ||
431 | ip27_rt_timer_interrupt(regs); | ||
432 | else if (pending & CAUSEF_IP2) /* PI_INT_PEND_0 or CC_PEND_{A|B} */ | ||
433 | ip27_do_irq_mask0(regs); | ||
434 | else if (pending & CAUSEF_IP3) /* PI_INT_PEND_1 */ | ||
435 | ip27_do_irq_mask1(regs); | ||
436 | else if (pending & CAUSEF_IP5) | ||
437 | ip27_prof_timer(regs); | ||
438 | else if (pending & CAUSEF_IP6) | ||
439 | ip27_hub_error(regs); | ||
440 | } | ||
441 | |||
424 | void __init arch_init_irq(void) | 442 | void __init arch_init_irq(void) |
425 | { | 443 | { |
426 | set_except_vector(0, ip27_irq); | ||
427 | } | 444 | } |
428 | 445 | ||
429 | void install_ipi(void) | 446 | void install_ipi(void) |
diff --git a/arch/mips/sgi-ip32/Makefile b/arch/mips/sgi-ip32/Makefile index 470898f4afe1..530bf848c3d0 100644 --- a/arch/mips/sgi-ip32/Makefile +++ b/arch/mips/sgi-ip32/Makefile | |||
@@ -3,7 +3,7 @@ | |||
3 | # under Linux. | 3 | # under Linux. |
4 | # | 4 | # |
5 | 5 | ||
6 | obj-y += ip32-berr.o ip32-irq.o ip32-irq-glue.o ip32-setup.o ip32-reset.o \ | 6 | obj-y += ip32-berr.o ip32-irq.o ip32-setup.o ip32-reset.o \ |
7 | crime.o ip32-memory.o | 7 | crime.o ip32-memory.o |
8 | 8 | ||
9 | EXTRA_AFLAGS := $(CFLAGS) | 9 | EXTRA_AFLAGS := $(CFLAGS) |
diff --git a/arch/mips/sgi-ip32/ip32-irq-glue.S b/arch/mips/sgi-ip32/ip32-irq-glue.S deleted file mode 100644 index 200924e1c4f5..000000000000 --- a/arch/mips/sgi-ip32/ip32-irq-glue.S +++ /dev/null | |||
@@ -1,86 +0,0 @@ | |||
1 | /* | ||
2 | * Low level interrupt handler for the SGI O2 aka IP32 aka Moosehead | ||
3 | * | ||
4 | * This file is subject to the terms and conditions of the GNU General Public | ||
5 | * License. See the file "COPYING" in the main directory of this archive | ||
6 | * for more details. | ||
7 | * | ||
8 | * Copyright (C) 2000 Harald Koerfgen | ||
9 | * Copyright (C) 2001 Keith M Wesolowski | ||
10 | */ | ||
11 | #include <asm/asm.h> | ||
12 | #include <asm/regdef.h> | ||
13 | #include <asm/mipsregs.h> | ||
14 | #include <asm/stackframe.h> | ||
15 | #include <asm/addrspace.h> | ||
16 | |||
17 | .text | ||
18 | .set noreorder | ||
19 | .set noat | ||
20 | .align 5 | ||
21 | NESTED(ip32_handle_int, PT_SIZE, ra) | ||
22 | .set noat | ||
23 | SAVE_ALL | ||
24 | CLI # TEST: interrupts should be off | ||
25 | .set at | ||
26 | .set noreorder | ||
27 | |||
28 | mfc0 s0,CP0_CAUSE | ||
29 | |||
30 | andi t1, s0, IE_IRQ0 | ||
31 | bnez t1, handle_irq0 | ||
32 | andi t1, s0, IE_IRQ1 | ||
33 | bnez t1, handle_irq1 | ||
34 | andi t1, s0, IE_IRQ2 | ||
35 | bnez t1, handle_irq2 | ||
36 | andi t1, s0, IE_IRQ3 | ||
37 | bnez t1, handle_irq3 | ||
38 | andi t1, s0, IE_IRQ4 | ||
39 | bnez t1, handle_irq4 | ||
40 | andi t1, s0, IE_IRQ5 | ||
41 | bnez t1, handle_irq5 | ||
42 | nop | ||
43 | |||
44 | /* Either someone has triggered the "software interrupts" | ||
45 | * or we lost an interrupt somehow. Ignore it. | ||
46 | */ | ||
47 | j ret_from_irq | ||
48 | nop | ||
49 | |||
50 | handle_irq0: | ||
51 | jal ip32_irq0 | ||
52 | move a0, sp | ||
53 | j ret_from_irq | ||
54 | nop | ||
55 | |||
56 | handle_irq1: | ||
57 | jal ip32_irq1 | ||
58 | move a0, sp | ||
59 | j ret_from_irq | ||
60 | nop | ||
61 | |||
62 | handle_irq2: | ||
63 | jal ip32_irq2 | ||
64 | move a0, sp | ||
65 | j ret_from_irq | ||
66 | nop | ||
67 | |||
68 | handle_irq3: | ||
69 | jal ip32_irq3 | ||
70 | move a0, sp | ||
71 | j ret_from_irq | ||
72 | nop | ||
73 | |||
74 | handle_irq4: | ||
75 | jal ip32_irq4 | ||
76 | move a0, sp | ||
77 | j ret_from_irq | ||
78 | nop | ||
79 | |||
80 | handle_irq5: | ||
81 | jal ip32_irq5 | ||
82 | move a0, sp | ||
83 | j ret_from_irq | ||
84 | nop | ||
85 | |||
86 | END(ip32_handle_int) | ||
diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c index 2eb22d692ed9..22a6df94b4a1 100644 --- a/arch/mips/sgi-ip32/ip32-irq.c +++ b/arch/mips/sgi-ip32/ip32-irq.c | |||
@@ -130,8 +130,6 @@ struct irqaction memerr_irq = { crime_memerr_intr, SA_INTERRUPT, | |||
130 | struct irqaction cpuerr_irq = { crime_cpuerr_intr, SA_INTERRUPT, | 130 | struct irqaction cpuerr_irq = { crime_cpuerr_intr, SA_INTERRUPT, |
131 | CPU_MASK_NONE, "CRIME CPU error", NULL, NULL }; | 131 | CPU_MASK_NONE, "CRIME CPU error", NULL, NULL }; |
132 | 132 | ||
133 | extern void ip32_handle_int(void); | ||
134 | |||
135 | /* | 133 | /* |
136 | * For interrupts wired from a single device to the CPU. Only the clock | 134 | * For interrupts wired from a single device to the CPU. Only the clock |
137 | * uses this it seems, which is IRQ 0 and IP7. | 135 | * uses this it seems, which is IRQ 0 and IP7. |
@@ -503,7 +501,7 @@ static void ip32_unknown_interrupt(struct pt_regs *regs) | |||
503 | 501 | ||
504 | /* CRIME 1.1 appears to deliver all interrupts to this one pin. */ | 502 | /* CRIME 1.1 appears to deliver all interrupts to this one pin. */ |
505 | /* change this to loop over all edge-triggered irqs, exception masked out ones */ | 503 | /* change this to loop over all edge-triggered irqs, exception masked out ones */ |
506 | void ip32_irq0(struct pt_regs *regs) | 504 | static void ip32_irq0(struct pt_regs *regs) |
507 | { | 505 | { |
508 | uint64_t crime_int; | 506 | uint64_t crime_int; |
509 | int irq = 0; | 507 | int irq = 0; |
@@ -520,31 +518,49 @@ void ip32_irq0(struct pt_regs *regs) | |||
520 | do_IRQ(irq, regs); | 518 | do_IRQ(irq, regs); |
521 | } | 519 | } |
522 | 520 | ||
523 | void ip32_irq1(struct pt_regs *regs) | 521 | static void ip32_irq1(struct pt_regs *regs) |
524 | { | 522 | { |
525 | ip32_unknown_interrupt(regs); | 523 | ip32_unknown_interrupt(regs); |
526 | } | 524 | } |
527 | 525 | ||
528 | void ip32_irq2(struct pt_regs *regs) | 526 | static void ip32_irq2(struct pt_regs *regs) |
529 | { | 527 | { |
530 | ip32_unknown_interrupt(regs); | 528 | ip32_unknown_interrupt(regs); |
531 | } | 529 | } |
532 | 530 | ||
533 | void ip32_irq3(struct pt_regs *regs) | 531 | static void ip32_irq3(struct pt_regs *regs) |
534 | { | 532 | { |
535 | ip32_unknown_interrupt(regs); | 533 | ip32_unknown_interrupt(regs); |
536 | } | 534 | } |
537 | 535 | ||
538 | void ip32_irq4(struct pt_regs *regs) | 536 | static void ip32_irq4(struct pt_regs *regs) |
539 | { | 537 | { |
540 | ip32_unknown_interrupt(regs); | 538 | ip32_unknown_interrupt(regs); |
541 | } | 539 | } |
542 | 540 | ||
543 | void ip32_irq5(struct pt_regs *regs) | 541 | static void ip32_irq5(struct pt_regs *regs) |
544 | { | 542 | { |
545 | ll_timer_interrupt(IP32_R4K_TIMER_IRQ, regs); | 543 | ll_timer_interrupt(IP32_R4K_TIMER_IRQ, regs); |
546 | } | 544 | } |
547 | 545 | ||
546 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) | ||
547 | { | ||
548 | unsigned int pending = read_c0_cause(); | ||
549 | |||
550 | if (likely(pending & IE_IRQ0)) | ||
551 | ip32_irq0(regs); | ||
552 | else if (unlikely(pending & IE_IRQ1)) | ||
553 | ip32_irq1(regs); | ||
554 | else if (unlikely(pending & IE_IRQ2)) | ||
555 | ip32_irq2(regs); | ||
556 | else if (unlikely(pending & IE_IRQ3)) | ||
557 | ip32_irq3(regs); | ||
558 | else if (unlikely(pending & IE_IRQ4)) | ||
559 | ip32_irq4(regs); | ||
560 | else if (likely(pending & IE_IRQ5)) | ||
561 | ip32_irq5(regs); | ||
562 | } | ||
563 | |||
548 | void __init arch_init_irq(void) | 564 | void __init arch_init_irq(void) |
549 | { | 565 | { |
550 | unsigned int irq; | 566 | unsigned int irq; |
@@ -556,7 +572,6 @@ void __init arch_init_irq(void) | |||
556 | crime->soft_int = 0; | 572 | crime->soft_int = 0; |
557 | mace->perif.ctrl.istat = 0; | 573 | mace->perif.ctrl.istat = 0; |
558 | mace->perif.ctrl.imask = 0; | 574 | mace->perif.ctrl.imask = 0; |
559 | set_except_vector(0, ip32_handle_int); | ||
560 | 575 | ||
561 | for (irq = 0; irq <= IP32_IRQ_MAX; irq++) { | 576 | for (irq = 0; irq <= IP32_IRQ_MAX; irq++) { |
562 | hw_irq_controller *controller; | 577 | hw_irq_controller *controller; |
diff --git a/arch/mips/sibyte/bcm1480/Makefile b/arch/mips/sibyte/bcm1480/Makefile index 538d5a51ae94..7b36ff3873b7 100644 --- a/arch/mips/sibyte/bcm1480/Makefile +++ b/arch/mips/sibyte/bcm1480/Makefile | |||
@@ -1,4 +1,4 @@ | |||
1 | obj-y := setup.o irq.o irq_handler.o time.o | 1 | obj-y := setup.o irq.o time.o |
2 | 2 | ||
3 | obj-$(CONFIG_SMP) += smp.o | 3 | obj-$(CONFIG_SMP) += smp.o |
4 | 4 | ||
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c index 9cf7d713b13c..e61760b14d99 100644 --- a/arch/mips/sibyte/bcm1480/irq.c +++ b/arch/mips/sibyte/bcm1480/irq.c | |||
@@ -187,9 +187,6 @@ static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask) | |||
187 | #endif | 187 | #endif |
188 | 188 | ||
189 | 189 | ||
190 | /* Defined in arch/mips/sibyte/bcm1480/irq_handler.S */ | ||
191 | extern void bcm1480_irq_handler(void); | ||
192 | |||
193 | /*****************************************************************************/ | 190 | /*****************************************************************************/ |
194 | 191 | ||
195 | static unsigned int startup_bcm1480_irq(unsigned int irq) | 192 | static unsigned int startup_bcm1480_irq(unsigned int irq) |
@@ -422,7 +419,6 @@ void __init arch_init_irq(void) | |||
422 | #endif | 419 | #endif |
423 | /* Enable necessary IPs, disable the rest */ | 420 | /* Enable necessary IPs, disable the rest */ |
424 | change_c0_status(ST0_IM, imask); | 421 | change_c0_status(ST0_IM, imask); |
425 | set_except_vector(0, bcm1480_irq_handler); | ||
426 | 422 | ||
427 | #ifdef CONFIG_KGDB | 423 | #ifdef CONFIG_KGDB |
428 | if (kgdb_flag) { | 424 | if (kgdb_flag) { |
@@ -473,3 +469,76 @@ void bcm1480_kgdb_interrupt(struct pt_regs *regs) | |||
473 | } | 469 | } |
474 | 470 | ||
475 | #endif /* CONFIG_KGDB */ | 471 | #endif /* CONFIG_KGDB */ |
472 | |||
473 | static inline int dclz(unsigned long long x) | ||
474 | { | ||
475 | int lz; | ||
476 | |||
477 | __asm__ ( | ||
478 | " .set push \n" | ||
479 | " .set mips64 \n" | ||
480 | " dclz %0, %1 \n" | ||
481 | " .set pop \n" | ||
482 | : "=r" (lz) | ||
483 | : "r" (x)); | ||
484 | |||
485 | return lz; | ||
486 | } | ||
487 | |||
488 | extern void bcm1480_timer_interrupt(struct pt_regs *regs); | ||
489 | extern void bcm1480_mailbox_interrupt(struct pt_regs *regs); | ||
490 | extern void bcm1480_kgdb_interrupt(struct pt_regs *regs); | ||
491 | |||
492 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) | ||
493 | { | ||
494 | unsigned int pending; | ||
495 | |||
496 | #ifdef CONFIG_SIBYTE_BCM1480_PROF | ||
497 | /* Set compare to count to silence count/compare timer interrupts */ | ||
498 | write_c0_compare(read_c0_count()); | ||
499 | #endif | ||
500 | |||
501 | pending = read_c0_cause(); | ||
502 | |||
503 | #ifdef CONFIG_SIBYTE_BCM1480_PROF | ||
504 | if (pending & CAUSEF_IP7) /* Cpu performance counter interrupt */ | ||
505 | sbprof_cpu_intr(exception_epc(regs)); | ||
506 | #endif | ||
507 | |||
508 | if (pending & CAUSEF_IP4) | ||
509 | bcm1480_timer_interrupt(regs); | ||
510 | |||
511 | #ifdef CONFIG_SMP | ||
512 | if (pending & CAUSEF_IP3) | ||
513 | bcm1480_mailbox_interrupt(regs); | ||
514 | #endif | ||
515 | |||
516 | #ifdef CONFIG_KGDB | ||
517 | if (pending & CAUSEF_IP6) | ||
518 | bcm1480_kgdb_interrupt(regs); /* KGDB (uart 1) */ | ||
519 | #endif | ||
520 | |||
521 | if (pending & CAUSEF_IP2) { | ||
522 | unsigned long long mask_h, mask_l; | ||
523 | unsigned long base; | ||
524 | |||
525 | /* | ||
526 | * Default...we've hit an IP[2] interrupt, which means we've | ||
527 | * got to check the 1480 interrupt registers to figure out what | ||
528 | * to do. Need to detect which CPU we're on, now that | ||
529 | * smp_affinity is supported. | ||
530 | */ | ||
531 | base = A_BCM1480_IMR_MAPPER(smp_processor_id()); | ||
532 | mask_h = __raw_readq( | ||
533 | IOADDR(base + R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H)); | ||
534 | mask_l = __raw_readq( | ||
535 | IOADDR(base + R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L)); | ||
536 | |||
537 | if (!mask_h) { | ||
538 | if (mask_h ^ 1) | ||
539 | do_IRQ(63 - dclz(mask_h), regs); | ||
540 | else | ||
541 | do_IRQ(127 - dclz(mask_l), regs); | ||
542 | } | ||
543 | } | ||
544 | } | ||
diff --git a/arch/mips/sibyte/bcm1480/irq_handler.S b/arch/mips/sibyte/bcm1480/irq_handler.S deleted file mode 100644 index 408db88d050f..000000000000 --- a/arch/mips/sibyte/bcm1480/irq_handler.S +++ /dev/null | |||
@@ -1,165 +0,0 @@ | |||
1 | /* | ||
2 | * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation | ||
3 | * | ||
4 | * This program is free software; you can redistribute it and/or | ||
5 | * modify it under the terms of the GNU General Public License | ||
6 | * as published by the Free Software Foundation; either version 2 | ||
7 | * of the License, or (at your option) any later version. | ||
8 | * | ||
9 | * This program is distributed in the hope that it will be useful, | ||
10 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
11 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
12 | * GNU General Public License for more details. | ||
13 | * | ||
14 | * You should have received a copy of the GNU General Public License | ||
15 | * along with this program; if not, write to the Free Software | ||
16 | * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | ||
17 | */ | ||
18 | |||
19 | /* | ||
20 | * bcm1480_irq_handler() is the routine that is actually called when an | ||
21 | * interrupt occurs. It is installed as the exception vector handler in | ||
22 | * init_IRQ() in arch/mips/sibyte/bcm1480/irq.c | ||
23 | * | ||
24 | * In the handle we figure out which interrupts need handling, and use that | ||
25 | * to call the dispatcher, which will take care of actually calling | ||
26 | * registered handlers | ||
27 | * | ||
28 | * Note that we take care of all raised interrupts in one go at the handler. | ||
29 | * This is more BSDish than the Indy code, and also, IMHO, more sane. | ||
30 | */ | ||
31 | #include <linux/config.h> | ||
32 | |||
33 | #include <asm/addrspace.h> | ||
34 | #include <asm/asm.h> | ||
35 | #include <asm/mipsregs.h> | ||
36 | #include <asm/regdef.h> | ||
37 | #include <asm/stackframe.h> | ||
38 | #include <asm/sibyte/sb1250_defs.h> | ||
39 | #include <asm/sibyte/bcm1480_regs.h> | ||
40 | #include <asm/sibyte/bcm1480_int.h> | ||
41 | |||
42 | /* | ||
43 | * What a pain. We have to be really careful saving the upper 32 bits of any | ||
44 | * register across function calls if we don't want them trashed--since were | ||
45 | * running in -o32, the calling routing never saves the full 64 bits of a | ||
46 | * register across a function call. Being the interrupt handler, we're | ||
47 | * guaranteed that interrupts are disabled during this code so we don't have | ||
48 | * to worry about random interrupts blasting the high 32 bits. | ||
49 | */ | ||
50 | |||
51 | .text | ||
52 | .set push | ||
53 | .set noreorder | ||
54 | .set noat | ||
55 | .set mips64 | ||
56 | #.set mips4 | ||
57 | .align 5 | ||
58 | NESTED(bcm1480_irq_handler, PT_SIZE, sp) | ||
59 | SAVE_ALL | ||
60 | CLI | ||
61 | |||
62 | #ifdef CONFIG_SIBYTE_BCM1480_PROF | ||
63 | /* Set compare to count to silence count/compare timer interrupts */ | ||
64 | mfc0 t1, CP0_COUNT | ||
65 | mtc0 t1, CP0_COMPARE /* pause to clear IP[7] bit of cause ? */ | ||
66 | #endif | ||
67 | /* Read cause */ | ||
68 | mfc0 s0, CP0_CAUSE | ||
69 | |||
70 | #ifdef CONFIG_SIBYTE_BCM1480_PROF | ||
71 | /* Cpu performance counter interrupt is routed to IP[7] */ | ||
72 | andi t1, s0, CAUSEF_IP7 | ||
73 | beqz t1, 0f | ||
74 | srl t1, s0, (CAUSEB_BD-2) /* Shift BD bit to bit 2 */ | ||
75 | and t1, t1, 0x4 /* mask to get just BD bit */ | ||
76 | #ifdef CONFIG_MIPS64 | ||
77 | dmfc0 a0, CP0_EPC | ||
78 | daddu a0, a0, t1 /* a0 = EPC + (BD ? 4 : 0) */ | ||
79 | #else | ||
80 | mfc0 a0, CP0_EPC | ||
81 | addu a0, a0, t1 /* a0 = EPC + (BD ? 4 : 0) */ | ||
82 | #endif | ||
83 | jal sbprof_cpu_intr | ||
84 | nop | ||
85 | j ret_from_irq | ||
86 | nop | ||
87 | 0: | ||
88 | #endif | ||
89 | |||
90 | /* Timer interrupt is routed to IP[4] */ | ||
91 | andi t1, s0, CAUSEF_IP4 | ||
92 | beqz t1, 1f | ||
93 | nop | ||
94 | jal bcm1480_timer_interrupt | ||
95 | move a0, sp /* Pass the registers along */ | ||
96 | j ret_from_irq | ||
97 | nop /* delay slot */ | ||
98 | 1: | ||
99 | |||
100 | #ifdef CONFIG_SMP | ||
101 | /* Mailbox interrupt is routed to IP[3] */ | ||
102 | andi t1, s0, CAUSEF_IP3 | ||
103 | beqz t1, 2f | ||
104 | nop | ||
105 | jal bcm1480_mailbox_interrupt | ||
106 | move a0, sp | ||
107 | j ret_from_irq | ||
108 | nop /* delay slot */ | ||
109 | 2: | ||
110 | #endif | ||
111 | |||
112 | #ifdef CONFIG_KGDB | ||
113 | /* KGDB (uart 1) interrupt is routed to IP[6] */ | ||
114 | andi t1, s0, CAUSEF_IP6 | ||
115 | beqz t1, 3f | ||
116 | nop /* delay slot */ | ||
117 | jal bcm1480_kgdb_interrupt | ||
118 | move a0, sp | ||
119 | j ret_from_irq | ||
120 | nop /* delay slot */ | ||
121 | 3: | ||
122 | #endif | ||
123 | |||
124 | and t1, s0, CAUSEF_IP2 | ||
125 | beqz t1, 9f | ||
126 | nop | ||
127 | |||
128 | /* | ||
129 | * Default...we've hit an IP[2] interrupt, which means we've got | ||
130 | * to check the 1480 interrupt registers to figure out what to do | ||
131 | * Need to detect which CPU we're on, now that smp_affinity is | ||
132 | * supported. | ||
133 | */ | ||
134 | PTR_LA v0, CKSEG1 + A_BCM1480_IMR_CPU0_BASE | ||
135 | #ifdef CONFIG_SMP | ||
136 | lw t1, TI_CPU($28) | ||
137 | sll t1, t1, BCM1480_IMR_REGISTER_SPACING_SHIFT | ||
138 | addu v0, v0, t1 | ||
139 | #endif | ||
140 | |||
141 | /* Read IP[2] status (get both high and low halves of status) */ | ||
142 | ld s0, R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H(v0) | ||
143 | ld s1, R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L(v0) | ||
144 | |||
145 | move s2, zero /* intr number */ | ||
146 | li s3, 64 | ||
147 | |||
148 | beqz s0, 9f /* No interrupts. Return. */ | ||
149 | move a1, sp | ||
150 | |||
151 | xori s4, s0, 1 /* if s0 (_H) == 1, it's a low intr, so... */ | ||
152 | movz s2, s3, s4 /* start the intr number at 64, and */ | ||
153 | movz s0, s1, s4 /* look at the low status value. */ | ||
154 | |||
155 | dclz s1, s0 /* Find the next interrupt. */ | ||
156 | dsubu a0, zero, s1 | ||
157 | daddiu a0, a0, 63 | ||
158 | jal do_IRQ | ||
159 | daddu a0, a0, s2 | ||
160 | |||
161 | 9: j ret_from_irq | ||
162 | nop | ||
163 | |||
164 | .set pop | ||
165 | END(bcm1480_irq_handler) | ||
diff --git a/arch/mips/sibyte/sb1250/Makefile b/arch/mips/sibyte/sb1250/Makefile index a8af84697588..a2fdbd62f8ac 100644 --- a/arch/mips/sibyte/sb1250/Makefile +++ b/arch/mips/sibyte/sb1250/Makefile | |||
@@ -1,4 +1,4 @@ | |||
1 | obj-y := setup.o irq.o irq_handler.o time.o | 1 | obj-y := setup.o irq.o time.o |
2 | 2 | ||
3 | obj-$(CONFIG_SMP) += smp.o | 3 | obj-$(CONFIG_SMP) += smp.o |
4 | obj-$(CONFIG_SIBYTE_TBPROF) += bcm1250_tbprof.o | 4 | obj-$(CONFIG_SIBYTE_TBPROF) += bcm1250_tbprof.o |
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c index 589537bfcc3d..0f6e54db4888 100644 --- a/arch/mips/sibyte/sb1250/irq.c +++ b/arch/mips/sibyte/sb1250/irq.c | |||
@@ -163,10 +163,6 @@ static void sb1250_set_affinity(unsigned int irq, cpumask_t mask) | |||
163 | } | 163 | } |
164 | #endif | 164 | #endif |
165 | 165 | ||
166 | |||
167 | /* Defined in arch/mips/sibyte/sb1250/irq_handler.S */ | ||
168 | extern void sb1250_irq_handler(void); | ||
169 | |||
170 | /*****************************************************************************/ | 166 | /*****************************************************************************/ |
171 | 167 | ||
172 | static unsigned int startup_sb1250_irq(unsigned int irq) | 168 | static unsigned int startup_sb1250_irq(unsigned int irq) |
@@ -379,7 +375,6 @@ void __init arch_init_irq(void) | |||
379 | #endif | 375 | #endif |
380 | /* Enable necessary IPs, disable the rest */ | 376 | /* Enable necessary IPs, disable the rest */ |
381 | change_c0_status(ST0_IM, imask); | 377 | change_c0_status(ST0_IM, imask); |
382 | set_except_vector(0, sb1250_irq_handler); | ||
383 | 378 | ||
384 | #ifdef CONFIG_KGDB | 379 | #ifdef CONFIG_KGDB |
385 | if (kgdb_flag) { | 380 | if (kgdb_flag) { |
@@ -409,7 +404,7 @@ void __init arch_init_irq(void) | |||
409 | #define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port,reg))) | 404 | #define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port,reg))) |
410 | #define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port,reg))) | 405 | #define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port,reg))) |
411 | 406 | ||
412 | void sb1250_kgdb_interrupt(struct pt_regs *regs) | 407 | static void sb1250_kgdb_interrupt(struct pt_regs *regs) |
413 | { | 408 | { |
414 | /* | 409 | /* |
415 | * Clear break-change status (allow some time for the remote | 410 | * Clear break-change status (allow some time for the remote |
@@ -424,3 +419,74 @@ void sb1250_kgdb_interrupt(struct pt_regs *regs) | |||
424 | } | 419 | } |
425 | 420 | ||
426 | #endif /* CONFIG_KGDB */ | 421 | #endif /* CONFIG_KGDB */ |
422 | |||
423 | static inline int dclz(unsigned long long x) | ||
424 | { | ||
425 | int lz; | ||
426 | |||
427 | __asm__ ( | ||
428 | " .set push \n" | ||
429 | " .set mips64 \n" | ||
430 | " dclz %0, %1 \n" | ||
431 | " .set pop \n" | ||
432 | : "=r" (lz) | ||
433 | : "r" (x)); | ||
434 | |||
435 | return lz; | ||
436 | } | ||
437 | |||
438 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) | ||
439 | { | ||
440 | unsigned int pending; | ||
441 | |||
442 | #ifdef CONFIG_SIBYTE_SB1250_PROF | ||
443 | /* Set compare to count to silence count/compare timer interrupts */ | ||
444 | write_c0_count(read_c0_count()); | ||
445 | #endif | ||
446 | |||
447 | /* | ||
448 | * What a pain. We have to be really careful saving the upper 32 bits | ||
449 | * of any * register across function calls if we don't want them | ||
450 | * trashed--since were running in -o32, the calling routing never saves | ||
451 | * the full 64 bits of a register across a function call. Being the | ||
452 | * interrupt handler, we're guaranteed that interrupts are disabled | ||
453 | * during this code so we don't have to worry about random interrupts | ||
454 | * blasting the high 32 bits. | ||
455 | */ | ||
456 | |||
457 | pending = read_c0_cause(); | ||
458 | |||
459 | #ifdef CONFIG_SIBYTE_SB1250_PROF | ||
460 | if (pending & CAUSEF_IP7) { /* Cpu performance counter interrupt */ | ||
461 | sbprof_cpu_intr(exception_epc(regs)); | ||
462 | } | ||
463 | #endif | ||
464 | |||
465 | if (pending & CAUSEF_IP4) | ||
466 | sb1250_timer_interrupt(regs); | ||
467 | |||
468 | #ifdef CONFIG_SMP | ||
469 | if (pending & CAUSEF_IP3) | ||
470 | sb1250_mailbox_interrupt(regs); | ||
471 | #endif | ||
472 | |||
473 | #ifdef CONFIG_KGDB | ||
474 | if (pending & CAUSEF_IP6) /* KGDB (uart 1) */ | ||
475 | sb1250_kgdb_interrupt(regs); | ||
476 | #endif | ||
477 | |||
478 | if (pending & CAUSEF_IP2) { | ||
479 | unsigned long long mask; | ||
480 | |||
481 | /* | ||
482 | * Default...we've hit an IP[2] interrupt, which means we've | ||
483 | * got to check the 1250 interrupt registers to figure out what | ||
484 | * to do. Need to detect which CPU we're on, now that | ||
485 | ~ smp_affinity is supported. | ||
486 | */ | ||
487 | mask = __raw_readq(IOADDR(A_IMR_REGISTER(smp_processor_id(), | ||
488 | R_IMR_INTERRUPT_STATUS_BASE))); | ||
489 | if (mask) | ||
490 | do_IRQ(63 - dclz(mask), regs); | ||
491 | } | ||
492 | } | ||
diff --git a/arch/mips/sibyte/sb1250/irq_handler.S b/arch/mips/sibyte/sb1250/irq_handler.S deleted file mode 100644 index 60edc8fb302b..000000000000 --- a/arch/mips/sibyte/sb1250/irq_handler.S +++ /dev/null | |||
@@ -1,147 +0,0 @@ | |||
1 | /* | ||
2 | * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation | ||
3 | * | ||
4 | * This program is free software; you can redistribute it and/or | ||
5 | * modify it under the terms of the GNU General Public License | ||
6 | * as published by the Free Software Foundation; either version 2 | ||
7 | * of the License, or (at your option) any later version. | ||
8 | * | ||
9 | * This program is distributed in the hope that it will be useful, | ||
10 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
11 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
12 | * GNU General Public License for more details. | ||
13 | * | ||
14 | * You should have received a copy of the GNU General Public License | ||
15 | * along with this program; if not, write to the Free Software | ||
16 | * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | ||
17 | */ | ||
18 | |||
19 | /* | ||
20 | * sb1250_handle_int() is the routine that is actually called when an interrupt | ||
21 | * occurs. It is installed as the exception vector handler in arch_init_irq() | ||
22 | * in arch/mips/sibyte/sb1250/irq.c | ||
23 | * | ||
24 | * In the handle we figure out which interrupts need handling, and use that to | ||
25 | * call the dispatcher, which will take care of actually calling registered | ||
26 | * handlers | ||
27 | * | ||
28 | * Note that we take care of all raised interrupts in one go at the handler. | ||
29 | * This is more BSDish than the Indy code, and also, IMHO, more sane. | ||
30 | */ | ||
31 | #include <linux/config.h> | ||
32 | |||
33 | #include <asm/addrspace.h> | ||
34 | #include <asm/asm.h> | ||
35 | #include <asm/mipsregs.h> | ||
36 | #include <asm/regdef.h> | ||
37 | #include <asm/stackframe.h> | ||
38 | #include <asm/sibyte/sb1250_defs.h> | ||
39 | #include <asm/sibyte/sb1250_regs.h> | ||
40 | #include <asm/sibyte/sb1250_int.h> | ||
41 | |||
42 | /* | ||
43 | * What a pain. We have to be really careful saving the upper 32 bits of any | ||
44 | * register across function calls if we don't want them trashed--since were | ||
45 | * running in -o32, the calling routing never saves the full 64 bits of a | ||
46 | * register across a function call. Being the interrupt handler, we're | ||
47 | * guaranteed that interrupts are disabled during this code so we don't have | ||
48 | * to worry about random interrupts blasting the high 32 bits. | ||
49 | */ | ||
50 | |||
51 | .text | ||
52 | .set push | ||
53 | .set noreorder | ||
54 | .set noat | ||
55 | .set mips64 | ||
56 | .align 5 | ||
57 | NESTED(sb1250_irq_handler, PT_SIZE, sp) | ||
58 | SAVE_ALL | ||
59 | CLI | ||
60 | |||
61 | #ifdef CONFIG_SIBYTE_SB1250_PROF | ||
62 | /* Set compare to count to silence count/compare timer interrupts */ | ||
63 | mfc0 t1, CP0_COUNT | ||
64 | mtc0 t1, CP0_COMPARE /* pause to clear IP[7] bit of cause ? */ | ||
65 | #endif | ||
66 | /* Read cause */ | ||
67 | mfc0 s0, CP0_CAUSE | ||
68 | |||
69 | #ifdef CONFIG_SIBYTE_SB1250_PROF | ||
70 | /* Cpu performance counter interrupt is routed to IP[7] */ | ||
71 | andi t1, s0, CAUSEF_IP7 | ||
72 | beqz t1, 0f | ||
73 | srl t1, s0, (CAUSEB_BD-2) /* Shift BD bit to bit 2 */ | ||
74 | and t1, t1, 0x4 /* mask to get just BD bit */ | ||
75 | mfc0 a0, CP0_EPC | ||
76 | jal sbprof_cpu_intr | ||
77 | addu a0, a0, t1 /* a0 = EPC + (BD ? 4 : 0) */ | ||
78 | j ret_from_irq | ||
79 | nop | ||
80 | 0: | ||
81 | #endif | ||
82 | |||
83 | /* Timer interrupt is routed to IP[4] */ | ||
84 | andi t1, s0, CAUSEF_IP4 | ||
85 | beqz t1, 1f | ||
86 | nop | ||
87 | jal sb1250_timer_interrupt | ||
88 | move a0, sp /* Pass the registers along */ | ||
89 | j ret_from_irq | ||
90 | nop # delay slot | ||
91 | 1: | ||
92 | |||
93 | #ifdef CONFIG_SMP | ||
94 | /* Mailbox interrupt is routed to IP[3] */ | ||
95 | andi t1, s0, CAUSEF_IP3 | ||
96 | beqz t1, 2f | ||
97 | nop | ||
98 | jal sb1250_mailbox_interrupt | ||
99 | move a0, sp | ||
100 | j ret_from_irq | ||
101 | nop # delay slot | ||
102 | 2: | ||
103 | #endif | ||
104 | |||
105 | #ifdef CONFIG_KGDB | ||
106 | /* KGDB (uart 1) interrupt is routed to IP[6] */ | ||
107 | andi t1, s0, CAUSEF_IP6 | ||
108 | beqz t1, 1f | ||
109 | nop # delay slot | ||
110 | jal sb1250_kgdb_interrupt | ||
111 | move a0, sp | ||
112 | j ret_from_irq | ||
113 | nop # delay slot | ||
114 | 1: | ||
115 | #endif | ||
116 | |||
117 | and t1, s0, CAUSEF_IP2 | ||
118 | beqz t1, 4f | ||
119 | nop | ||
120 | |||
121 | /* | ||
122 | * Default...we've hit an IP[2] interrupt, which means we've got to | ||
123 | * check the 1250 interrupt registers to figure out what to do | ||
124 | * Need to detect which CPU we're on, now that smp_affinity is supported. | ||
125 | */ | ||
126 | PTR_LA v0, CKSEG1 + A_IMR_CPU0_BASE | ||
127 | #ifdef CONFIG_SMP | ||
128 | lw t1, TI_CPU($28) | ||
129 | sll t1, IMR_REGISTER_SPACING_SHIFT | ||
130 | addu v0, t1 | ||
131 | #endif | ||
132 | ld s0, R_IMR_INTERRUPT_STATUS_BASE(v0) /* read IP[2] status */ | ||
133 | |||
134 | beqz s0, 4f /* No interrupts. Return */ | ||
135 | move a1, sp | ||
136 | |||
137 | 3: dclz s1, s0 /* Find the next interrupt */ | ||
138 | dsubu a0, zero, s1 | ||
139 | daddiu a0, a0, 63 | ||
140 | jal do_IRQ | ||
141 | nop | ||
142 | |||
143 | 4: j ret_from_irq | ||
144 | nop | ||
145 | |||
146 | .set pop | ||
147 | END(sb1250_irq_handler) | ||
diff --git a/arch/mips/sni/Makefile b/arch/mips/sni/Makefile index 1e5676e4be86..9c7eaa5fb210 100644 --- a/arch/mips/sni/Makefile +++ b/arch/mips/sni/Makefile | |||
@@ -2,6 +2,6 @@ | |||
2 | # Makefile for the SNI specific part of the kernel | 2 | # Makefile for the SNI specific part of the kernel |
3 | # | 3 | # |
4 | 4 | ||
5 | obj-y += int-handler.o irq.o pcimt_scache.o reset.o setup.o | 5 | obj-y += irq.o pcimt_scache.o reset.o setup.o |
6 | 6 | ||
7 | EXTRA_AFLAGS := $(CFLAGS) | 7 | EXTRA_AFLAGS := $(CFLAGS) |
diff --git a/arch/mips/sni/int-handler.S b/arch/mips/sni/int-handler.S deleted file mode 100644 index 2cdc09f55f18..000000000000 --- a/arch/mips/sni/int-handler.S +++ /dev/null | |||
@@ -1,106 +0,0 @@ | |||
1 | /* | ||
2 | * SNI RM200 PCI specific interrupt handler code. | ||
3 | * | ||
4 | * Copyright (C) 1994, 95, 96, 97, 98, 1999, 2000, 01 by Ralf Baechle | ||
5 | */ | ||
6 | #include <asm/asm.h> | ||
7 | #include <asm/mipsregs.h> | ||
8 | #include <asm/regdef.h> | ||
9 | #include <asm/sni.h> | ||
10 | #include <asm/stackframe.h> | ||
11 | |||
12 | /* | ||
13 | * The PCI ASIC has the nasty property that it may delay writes if it is busy. | ||
14 | * As a consequence from writes that have not graduated when we exit from the | ||
15 | * interrupt handler we might catch a spurious interrupt. To avoid this we | ||
16 | * force the PCI ASIC to graduate all writes by executing a read from the | ||
17 | * PCI bus. | ||
18 | */ | ||
19 | .set noreorder | ||
20 | .set noat | ||
21 | .align 5 | ||
22 | NESTED(sni_rm200_pci_handle_int, PT_SIZE, sp) | ||
23 | SAVE_ALL | ||
24 | CLI | ||
25 | .set at | ||
26 | |||
27 | /* Blinken light ... */ | ||
28 | lb t0, led_cache | ||
29 | addiu t0, 1 | ||
30 | sb t0, led_cache | ||
31 | sb t0, PCIMT_CSLED # write only register | ||
32 | .data | ||
33 | led_cache: .byte 0 | ||
34 | .text | ||
35 | |||
36 | mfc0 t0, CP0_STATUS | ||
37 | mfc0 t1, CP0_CAUSE | ||
38 | and t0, t1 | ||
39 | |||
40 | andi t1, t0, 0x0800 # hardware interrupt 1 | ||
41 | bnez t1, _hwint1 | ||
42 | andi t1, t0, 0x4000 # hardware interrupt 4 | ||
43 | bnez t1, _hwint4 | ||
44 | andi t1, t0, 0x2000 # hardware interrupt 3 | ||
45 | bnez t1, _hwint3 | ||
46 | andi t1, t0, 0x1000 # hardware interrupt 2 | ||
47 | bnez t1, _hwint2 | ||
48 | andi t1, t0, 0x8000 # hardware interrupt 5 | ||
49 | bnez t1, _hwint5 | ||
50 | andi t1, t0, 0x0400 # hardware interrupt 0 | ||
51 | bnez t1, _hwint0 | ||
52 | nop | ||
53 | |||
54 | j restore_all # spurious interrupt | ||
55 | nop | ||
56 | |||
57 | ############################################################################## | ||
58 | |||
59 | /* hwint0 should deal with MP agent, ASIC PCI, EISA NMI and debug | ||
60 | button interrupts. */ | ||
61 | _hwint0: jal pciasic_hwint0 | ||
62 | move a0, sp | ||
63 | j ret_from_irq | ||
64 | nop | ||
65 | |||
66 | /* | ||
67 | * hwint 1 deals with EISA and SCSI interrupts | ||
68 | */ | ||
69 | _hwint1: jal pciasic_hwint1 | ||
70 | move a0, sp | ||
71 | j ret_from_irq | ||
72 | nop | ||
73 | |||
74 | |||
75 | /* | ||
76 | * This interrupt was used for the com1 console on the first prototypes; | ||
77 | * it's unsed otherwise | ||
78 | */ | ||
79 | _hwint2: jal pciasic_hwint2 | ||
80 | move a0, sp | ||
81 | j ret_from_irq | ||
82 | nop | ||
83 | |||
84 | /* | ||
85 | * hwint 3 are the PCI interrupts A - D | ||
86 | */ | ||
87 | _hwint3: jal pciasic_hwint3 | ||
88 | move a0, sp | ||
89 | j ret_from_irq | ||
90 | nop | ||
91 | |||
92 | /* | ||
93 | * hwint 4 is used for only the onboard PCnet 32. | ||
94 | */ | ||
95 | _hwint4: jal pciasic_hwint4 | ||
96 | move a0, sp | ||
97 | j ret_from_irq | ||
98 | nop | ||
99 | |||
100 | /* hwint5 is the r4k count / compare interrupt */ | ||
101 | _hwint5: jal pciasic_hwint5 | ||
102 | move a0, sp | ||
103 | j ret_from_irq | ||
104 | nop | ||
105 | |||
106 | END(sni_rm200_pci_handle_int) | ||
diff --git a/arch/mips/sni/irq.c b/arch/mips/sni/irq.c index 952038aa4b90..7365b4853ddb 100644 --- a/arch/mips/sni/irq.c +++ b/arch/mips/sni/irq.c | |||
@@ -19,8 +19,6 @@ | |||
19 | 19 | ||
20 | DEFINE_SPINLOCK(pciasic_lock); | 20 | DEFINE_SPINLOCK(pciasic_lock); |
21 | 21 | ||
22 | extern asmlinkage void sni_rm200_pci_handle_int(void); | ||
23 | |||
24 | static void enable_pciasic_irq(unsigned int irq) | 22 | static void enable_pciasic_irq(unsigned int irq) |
25 | { | 23 | { |
26 | unsigned int mask = 1 << (irq - PCIMT_IRQ_INT2); | 24 | unsigned int mask = 1 << (irq - PCIMT_IRQ_INT2); |
@@ -71,20 +69,20 @@ static struct hw_interrupt_type pciasic_irq_type = { | |||
71 | * hwint0 should deal with MP agent, ASIC PCI, EISA NMI and debug | 69 | * hwint0 should deal with MP agent, ASIC PCI, EISA NMI and debug |
72 | * button interrupts. Later ... | 70 | * button interrupts. Later ... |
73 | */ | 71 | */ |
74 | void pciasic_hwint0(struct pt_regs *regs) | 72 | static void pciasic_hwint0(struct pt_regs *regs) |
75 | { | 73 | { |
76 | panic("Received int0 but no handler yet ..."); | 74 | panic("Received int0 but no handler yet ..."); |
77 | } | 75 | } |
78 | 76 | ||
79 | /* This interrupt was used for the com1 console on the first prototypes. */ | 77 | /* This interrupt was used for the com1 console on the first prototypes. */ |
80 | void pciasic_hwint2(struct pt_regs *regs) | 78 | static void pciasic_hwint2(struct pt_regs *regs) |
81 | { | 79 | { |
82 | /* I think this shouldn't happen on production machines. */ | 80 | /* I think this shouldn't happen on production machines. */ |
83 | panic("hwint2 and no handler yet"); | 81 | panic("hwint2 and no handler yet"); |
84 | } | 82 | } |
85 | 83 | ||
86 | /* hwint5 is the r4k count / compare interrupt */ | 84 | /* hwint5 is the r4k count / compare interrupt */ |
87 | void pciasic_hwint5(struct pt_regs *regs) | 85 | static void pciasic_hwint5(struct pt_regs *regs) |
88 | { | 86 | { |
89 | panic("hwint5 and no handler yet"); | 87 | panic("hwint5 and no handler yet"); |
90 | } | 88 | } |
@@ -105,7 +103,7 @@ static unsigned int ls1bit8(unsigned int x) | |||
105 | * | 103 | * |
106 | * The EISA_INT bit in CSITPEND is high active, all others are low active. | 104 | * The EISA_INT bit in CSITPEND is high active, all others are low active. |
107 | */ | 105 | */ |
108 | void pciasic_hwint1(struct pt_regs *regs) | 106 | static void pciasic_hwint1(struct pt_regs *regs) |
109 | { | 107 | { |
110 | u8 pend = *(volatile char *)PCIMT_CSITPEND; | 108 | u8 pend = *(volatile char *)PCIMT_CSITPEND; |
111 | unsigned long flags; | 109 | unsigned long flags; |
@@ -135,7 +133,7 @@ void pciasic_hwint1(struct pt_regs *regs) | |||
135 | /* | 133 | /* |
136 | * hwint 3 should deal with the PCI A - D interrupts, | 134 | * hwint 3 should deal with the PCI A - D interrupts, |
137 | */ | 135 | */ |
138 | void pciasic_hwint3(struct pt_regs *regs) | 136 | static void pciasic_hwint3(struct pt_regs *regs) |
139 | { | 137 | { |
140 | u8 pend = *(volatile char *)PCIMT_CSITPEND; | 138 | u8 pend = *(volatile char *)PCIMT_CSITPEND; |
141 | int irq; | 139 | int irq; |
@@ -150,13 +148,34 @@ void pciasic_hwint3(struct pt_regs *regs) | |||
150 | /* | 148 | /* |
151 | * hwint 4 is used for only the onboard PCnet 32. | 149 | * hwint 4 is used for only the onboard PCnet 32. |
152 | */ | 150 | */ |
153 | void pciasic_hwint4(struct pt_regs *regs) | 151 | static void pciasic_hwint4(struct pt_regs *regs) |
154 | { | 152 | { |
155 | clear_c0_status(IE_IRQ4); | 153 | clear_c0_status(IE_IRQ4); |
156 | do_IRQ(PCIMT_IRQ_ETHERNET, regs); | 154 | do_IRQ(PCIMT_IRQ_ETHERNET, regs); |
157 | set_c0_status(IE_IRQ4); | 155 | set_c0_status(IE_IRQ4); |
158 | } | 156 | } |
159 | 157 | ||
158 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) | ||
159 | { | ||
160 | unsigned int pending = read_c0_status() & read_c0_cause(); | ||
161 | static unsigned char led_cache; | ||
162 | |||
163 | *(volatile unsigned char *) PCIMT_CSLED = ++led_cache; | ||
164 | |||
165 | if (pending & 0x0800) | ||
166 | pciasic_hwint1(regs); | ||
167 | else if (pending & 0x4000) | ||
168 | pciasic_hwint4(regs); | ||
169 | else if (pending & 0x2000) | ||
170 | pciasic_hwint3(regs); | ||
171 | else if (pending & 0x1000) | ||
172 | pciasic_hwint2(regs); | ||
173 | else if (pending & 0x8000) | ||
174 | pciasic_hwint5(regs); | ||
175 | else if (pending & 0x0400) | ||
176 | pciasic_hwint0(regs); | ||
177 | } | ||
178 | |||
160 | void __init init_pciasic(void) | 179 | void __init init_pciasic(void) |
161 | { | 180 | { |
162 | unsigned long flags; | 181 | unsigned long flags; |
@@ -176,8 +195,6 @@ void __init arch_init_irq(void) | |||
176 | { | 195 | { |
177 | int i; | 196 | int i; |
178 | 197 | ||
179 | set_except_vector(0, sni_rm200_pci_handle_int); | ||
180 | |||
181 | init_i8259_irqs(); /* Integrated i8259 */ | 198 | init_i8259_irqs(); /* Integrated i8259 */ |
182 | init_pciasic(); | 199 | init_pciasic(); |
183 | 200 | ||
diff --git a/arch/mips/tx4927/common/Makefile b/arch/mips/tx4927/common/Makefile index 8fa126b296e1..9cb9535ebacb 100644 --- a/arch/mips/tx4927/common/Makefile +++ b/arch/mips/tx4927/common/Makefile | |||
@@ -6,7 +6,7 @@ | |||
6 | # unless it's something special (ie not a .c file). | 6 | # unless it's something special (ie not a .c file). |
7 | # | 7 | # |
8 | 8 | ||
9 | obj-y += tx4927_prom.o tx4927_setup.o tx4927_irq.o tx4927_irq_handler.o | 9 | obj-y += tx4927_prom.o tx4927_setup.o tx4927_irq.o |
10 | 10 | ||
11 | obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o | 11 | obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o |
12 | obj-$(CONFIG_KGDB) += tx4927_dbgio.o | 12 | obj-$(CONFIG_KGDB) += tx4927_dbgio.o |
diff --git a/arch/mips/tx4927/common/tx4927_irq.c b/arch/mips/tx4927/common/tx4927_irq.c index 5ab2e2b76018..8ca68015cf40 100644 --- a/arch/mips/tx4927/common/tx4927_irq.c +++ b/arch/mips/tx4927/common/tx4927_irq.c | |||
@@ -525,8 +525,6 @@ static void tx4927_irq_pic_end(unsigned int irq) | |||
525 | */ | 525 | */ |
526 | void __init tx4927_irq_init(void) | 526 | void __init tx4927_irq_init(void) |
527 | { | 527 | { |
528 | extern asmlinkage void tx4927_irq_handler(void); | ||
529 | |||
530 | TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT, "-\n"); | 528 | TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT, "-\n"); |
531 | 529 | ||
532 | TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT, "=Calling tx4927_irq_cp0_init()\n"); | 530 | TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT, "=Calling tx4927_irq_cp0_init()\n"); |
@@ -535,16 +533,12 @@ void __init tx4927_irq_init(void) | |||
535 | TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT, "=Calling tx4927_irq_pic_init()\n"); | 533 | TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT, "=Calling tx4927_irq_pic_init()\n"); |
536 | tx4927_irq_pic_init(); | 534 | tx4927_irq_pic_init(); |
537 | 535 | ||
538 | TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT, | ||
539 | "=Calling set_except_vector(tx4927_irq_handler)\n"); | ||
540 | set_except_vector(0, tx4927_irq_handler); | ||
541 | |||
542 | TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT, "+\n"); | 536 | TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT, "+\n"); |
543 | 537 | ||
544 | return; | 538 | return; |
545 | } | 539 | } |
546 | 540 | ||
547 | int tx4927_irq_nested(void) | 541 | static int tx4927_irq_nested(void) |
548 | { | 542 | { |
549 | int sw_irq = 0; | 543 | int sw_irq = 0; |
550 | u32 level2; | 544 | u32 level2; |
@@ -582,3 +576,25 @@ int tx4927_irq_nested(void) | |||
582 | 576 | ||
583 | return (sw_irq); | 577 | return (sw_irq); |
584 | } | 578 | } |
579 | |||
580 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) | ||
581 | { | ||
582 | unsigned int pending = read_c0_status() & read_c0_cause(); | ||
583 | |||
584 | if (pending & STATUSF_IP7) /* cpu timer */ | ||
585 | do_IRQ(TX4927_IRQ_CPU_TIMER, regs); | ||
586 | else if (pending & STATUSF_IP2) { /* tx4927 pic */ | ||
587 | unsigned int irq = tx4927_irq_nested(); | ||
588 | |||
589 | if (unlikely(irq == 0)) { | ||
590 | spurious_interrupt(regs); | ||
591 | return; | ||
592 | } | ||
593 | do_IRQ(irq, regs); | ||
594 | } else if (pending & STATUSF_IP0) /* user line 0 */ | ||
595 | do_IRQ(TX4927_IRQ_USER0, regs); | ||
596 | else if (pending & STATUSF_IP1) /* user line 1 */ | ||
597 | do_IRQ(TX4927_IRQ_USER1, regs); | ||
598 | else | ||
599 | spurious_interrupt(regs); | ||
600 | } | ||
diff --git a/arch/mips/tx4927/common/tx4927_irq_handler.S b/arch/mips/tx4927/common/tx4927_irq_handler.S deleted file mode 100644 index 0b2ea02574f2..000000000000 --- a/arch/mips/tx4927/common/tx4927_irq_handler.S +++ /dev/null | |||
@@ -1,104 +0,0 @@ | |||
1 | /* | ||
2 | * linux/arch/mips/tx4927/common/tx4927_irq_handler.S | ||
3 | * | ||
4 | * Primary interrupt handler for tx4927 based systems | ||
5 | * | ||
6 | * Author: MontaVista Software, Inc. | ||
7 | * Author: jsun@mvista.com or jsun@junsun.net | ||
8 | * source@mvista.com | ||
9 | * | ||
10 | * Copyright 2001-2002 MontaVista Software Inc. | ||
11 | * | ||
12 | * This program is free software; you can redistribute it and/or modify it | ||
13 | * under the terms of the GNU General Public License as published by the | ||
14 | * Free Software Foundation; either version 2 of the License, or (at your | ||
15 | * option) any later version. | ||
16 | * | ||
17 | * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED | ||
18 | * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | ||
19 | * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. | ||
20 | * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, | ||
21 | * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, | ||
22 | * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS | ||
23 | * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND | ||
24 | * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR | ||
25 | * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE | ||
26 | * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | ||
27 | * | ||
28 | * You should have received a copy of the GNU General Public License along | ||
29 | * with this program; if not, write to the Free Software Foundation, Inc., | ||
30 | * 675 Mass Ave, Cambridge, MA 02139, USA. | ||
31 | */ | ||
32 | #include <asm/asm.h> | ||
33 | #include <asm/mipsregs.h> | ||
34 | #include <asm/addrspace.h> | ||
35 | #include <asm/regdef.h> | ||
36 | #include <asm/stackframe.h> | ||
37 | #include <asm/tx4927/tx4927.h> | ||
38 | |||
39 | .align 5 | ||
40 | NESTED(tx4927_irq_handler, PT_SIZE, sp) | ||
41 | SAVE_ALL | ||
42 | CLI | ||
43 | .set at | ||
44 | |||
45 | mfc0 t0, CP0_CAUSE | ||
46 | mfc0 t1, CP0_STATUS | ||
47 | and t0, t1 | ||
48 | |||
49 | andi t1, t0, STATUSF_IP7 /* cpu timer */ | ||
50 | bnez t1, ll_ip7 | ||
51 | |||
52 | /* IP6..IP3 multiplexed -- do not use */ | ||
53 | |||
54 | andi t1, t0, STATUSF_IP2 /* tx4927 pic */ | ||
55 | bnez t1, ll_ip2 | ||
56 | |||
57 | andi t1, t0, STATUSF_IP0 /* user line 0 */ | ||
58 | bnez t1, ll_ip0 | ||
59 | |||
60 | andi t1, t0, STATUSF_IP1 /* user line 1 */ | ||
61 | bnez t1, ll_ip1 | ||
62 | |||
63 | .set reorder | ||
64 | |||
65 | /* wrong alarm or masked ... */ | ||
66 | jal spurious_interrupt | ||
67 | nop | ||
68 | j ret_from_irq | ||
69 | END(tx4927_irq_handler) | ||
70 | |||
71 | .align 5 | ||
72 | |||
73 | |||
74 | ll_ip7: | ||
75 | li a0, TX4927_IRQ_CPU_TIMER | ||
76 | move a1, sp | ||
77 | jal do_IRQ | ||
78 | j ret_from_irq | ||
79 | |||
80 | ll_ip2: | ||
81 | jal tx4927_irq_nested | ||
82 | nop | ||
83 | beqz v0, goto_spurious_interrupt | ||
84 | nop | ||
85 | move a0, v0 | ||
86 | move a1, sp | ||
87 | jal do_IRQ | ||
88 | j ret_from_irq | ||
89 | |||
90 | goto_spurious_interrupt: | ||
91 | j spurious_interrupt | ||
92 | nop | ||
93 | |||
94 | ll_ip1: | ||
95 | li a0, TX4927_IRQ_USER1 | ||
96 | move a1, sp | ||
97 | jal do_IRQ | ||
98 | j ret_from_irq | ||
99 | |||
100 | ll_ip0: | ||
101 | li a0, TX4927_IRQ_USER0 | ||
102 | move a1, sp | ||
103 | jal do_IRQ | ||
104 | j ret_from_irq | ||
diff --git a/arch/mips/tx4938/common/Makefile b/arch/mips/tx4938/common/Makefile index 74c95c5bcdbf..2033ae77f632 100644 --- a/arch/mips/tx4938/common/Makefile +++ b/arch/mips/tx4938/common/Makefile | |||
@@ -6,6 +6,6 @@ | |||
6 | # unless it's something special (ie not a .c file). | 6 | # unless it's something special (ie not a .c file). |
7 | # | 7 | # |
8 | 8 | ||
9 | obj-y += prom.o setup.o irq.o irq_handler.o rtc_rx5c348.o | 9 | obj-y += prom.o setup.o irq.o rtc_rx5c348.o |
10 | obj-$(CONFIG_KGDB) += dbgio.o | 10 | obj-$(CONFIG_KGDB) += dbgio.o |
11 | 11 | ||
diff --git a/arch/mips/tx4938/common/irq.c b/arch/mips/tx4938/common/irq.c index 4f90d7faf634..873805178d8e 100644 --- a/arch/mips/tx4938/common/irq.c +++ b/arch/mips/tx4938/common/irq.c | |||
@@ -392,11 +392,8 @@ tx4938_irq_pic_end(unsigned int irq) | |||
392 | void __init | 392 | void __init |
393 | tx4938_irq_init(void) | 393 | tx4938_irq_init(void) |
394 | { | 394 | { |
395 | extern asmlinkage void tx4938_irq_handler(void); | ||
396 | |||
397 | tx4938_irq_cp0_init(); | 395 | tx4938_irq_cp0_init(); |
398 | tx4938_irq_pic_init(); | 396 | tx4938_irq_pic_init(); |
399 | set_except_vector(0, tx4938_irq_handler); | ||
400 | 397 | ||
401 | return; | 398 | return; |
402 | } | 399 | } |
@@ -422,3 +419,21 @@ tx4938_irq_nested(void) | |||
422 | wbflush(); | 419 | wbflush(); |
423 | return (sw_irq); | 420 | return (sw_irq); |
424 | } | 421 | } |
422 | |||
423 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) | ||
424 | { | ||
425 | unsigned int pending = read_c0_cause() & read_c0_status(); | ||
426 | |||
427 | if (pending & STATUSF_IP7) | ||
428 | do_IRQ(TX4938_IRQ_CPU_TIMER, regs); | ||
429 | else if (pending & STATUSF_IP2) { | ||
430 | int irq = tx4938_irq_nested(); | ||
431 | if (irq) | ||
432 | do_IRQ(irq, regs); | ||
433 | else | ||
434 | spurious_interrupt(regs); | ||
435 | } else if (pending & STATUSF_IP1) | ||
436 | do_IRQ(TX4938_IRQ_USER1, regs); | ||
437 | else if (pending & STATUSF_IP0) | ||
438 | do_IRQ(TX4938_IRQ_USER0, regs); | ||
439 | } | ||
diff --git a/arch/mips/tx4938/common/irq_handler.S b/arch/mips/tx4938/common/irq_handler.S deleted file mode 100644 index 1b2f72bac42d..000000000000 --- a/arch/mips/tx4938/common/irq_handler.S +++ /dev/null | |||
@@ -1,84 +0,0 @@ | |||
1 | /* | ||
2 | * linux/arch/mips/tx4938/common/handler.S | ||
3 | * | ||
4 | * Primary interrupt handler for tx4938 based systems | ||
5 | * Copyright (C) 2000-2001 Toshiba Corporation | ||
6 | * | ||
7 | * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the | ||
8 | * terms of the GNU General Public License version 2. This program is | ||
9 | * licensed "as is" without any warranty of any kind, whether express | ||
10 | * or implied. | ||
11 | * | ||
12 | * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) | ||
13 | */ | ||
14 | #include <asm/asm.h> | ||
15 | #include <asm/mipsregs.h> | ||
16 | #include <asm/addrspace.h> | ||
17 | #include <asm/regdef.h> | ||
18 | #include <asm/stackframe.h> | ||
19 | #include <asm/tx4938/rbtx4938.h> | ||
20 | |||
21 | |||
22 | .align 5 | ||
23 | NESTED(tx4938_irq_handler, PT_SIZE, sp) | ||
24 | SAVE_ALL | ||
25 | CLI | ||
26 | .set at | ||
27 | |||
28 | mfc0 t0, CP0_CAUSE | ||
29 | mfc0 t1, CP0_STATUS | ||
30 | and t0, t1 | ||
31 | |||
32 | andi t1, t0, STATUSF_IP7 /* cpu timer */ | ||
33 | bnez t1, ll_ip7 | ||
34 | |||
35 | /* IP6..IP3 multiplexed -- do not use */ | ||
36 | |||
37 | andi t1, t0, STATUSF_IP2 /* tx4938 pic */ | ||
38 | bnez t1, ll_ip2 | ||
39 | |||
40 | andi t1, t0, STATUSF_IP1 /* user line 1 */ | ||
41 | bnez t1, ll_ip1 | ||
42 | |||
43 | andi t1, t0, STATUSF_IP0 /* user line 0 */ | ||
44 | bnez t1, ll_ip0 | ||
45 | |||
46 | .set reorder | ||
47 | |||
48 | nop | ||
49 | END(tx4938_irq_handler) | ||
50 | |||
51 | .align 5 | ||
52 | |||
53 | |||
54 | ll_ip7: | ||
55 | li a0, TX4938_IRQ_CPU_TIMER | ||
56 | move a1, sp | ||
57 | jal do_IRQ | ||
58 | j ret_from_irq | ||
59 | |||
60 | |||
61 | ll_ip2: | ||
62 | jal tx4938_irq_nested | ||
63 | nop | ||
64 | beqz v0, goto_spurious_interrupt | ||
65 | nop | ||
66 | move a0, v0 | ||
67 | move a1, sp | ||
68 | jal do_IRQ | ||
69 | j ret_from_irq | ||
70 | |||
71 | goto_spurious_interrupt: | ||
72 | j ret_from_irq | ||
73 | |||
74 | ll_ip1: | ||
75 | li a0, TX4938_IRQ_USER1 | ||
76 | move a1, sp | ||
77 | jal do_IRQ | ||
78 | j ret_from_irq | ||
79 | |||
80 | ll_ip0: | ||
81 | li a0, TX4938_IRQ_USER0 | ||
82 | move a1, sp | ||
83 | jal do_IRQ | ||
84 | j ret_from_irq | ||
diff --git a/arch/mips/vr41xx/common/Makefile b/arch/mips/vr41xx/common/Makefile index 9096302a7ecc..aa373974c80f 100644 --- a/arch/mips/vr41xx/common/Makefile +++ b/arch/mips/vr41xx/common/Makefile | |||
@@ -2,7 +2,7 @@ | |||
2 | # Makefile for common code of the NEC VR4100 series. | 2 | # Makefile for common code of the NEC VR4100 series. |
3 | # | 3 | # |
4 | 4 | ||
5 | obj-y += bcu.o cmu.o icu.o init.o int-handler.o irq.o pmu.o type.o | 5 | obj-y += bcu.o cmu.o icu.o init.o irq.o pmu.o type.o |
6 | obj-$(CONFIG_VRC4173) += vrc4173.o | 6 | obj-$(CONFIG_VRC4173) += vrc4173.o |
7 | 7 | ||
8 | EXTRA_AFLAGS := $(CFLAGS) | 8 | EXTRA_AFLAGS := $(CFLAGS) |
diff --git a/arch/mips/vr41xx/common/int-handler.S b/arch/mips/vr41xx/common/int-handler.S deleted file mode 100644 index e8652348fef1..000000000000 --- a/arch/mips/vr41xx/common/int-handler.S +++ /dev/null | |||
@@ -1,116 +0,0 @@ | |||
1 | /* | ||
2 | * FILE NAME | ||
3 | * arch/mips/vr41xx/common/int-handler.S | ||
4 | * | ||
5 | * BRIEF MODULE DESCRIPTION | ||
6 | * Interrupt dispatcher for the NEC VR4100 series. | ||
7 | * | ||
8 | * Author: Yoichi Yuasa | ||
9 | * yyuasa@mvista.com or source@mvista.com | ||
10 | * | ||
11 | * Copyright 2001 MontaVista Software Inc. | ||
12 | * | ||
13 | * This program is free software; you can redistribute it and/or modify it | ||
14 | * under the terms of the GNU General Public License as published by the | ||
15 | * Free Software Foundation; either version 2 of the License, or (at your | ||
16 | * option) any later version. | ||
17 | * | ||
18 | * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED | ||
19 | * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | ||
20 | * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. | ||
21 | * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, | ||
22 | * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, | ||
23 | * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS | ||
24 | * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND | ||
25 | * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR | ||
26 | * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE | ||
27 | * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | ||
28 | * | ||
29 | * You should have received a copy of the GNU General Public License along | ||
30 | * with this program; if not, write to the Free Software Foundation, Inc., | ||
31 | * 675 Mass Ave, Cambridge, MA 02139, USA. | ||
32 | */ | ||
33 | /* | ||
34 | * Changes: | ||
35 | * MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com> | ||
36 | * - New creation, NEC VR4100 series are supported. | ||
37 | * | ||
38 | * Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> | ||
39 | * - Coped with INTASSIGN of NEC VR4133. | ||
40 | */ | ||
41 | #include <asm/asm.h> | ||
42 | #include <asm/regdef.h> | ||
43 | #include <asm/mipsregs.h> | ||
44 | #include <asm/stackframe.h> | ||
45 | |||
46 | .text | ||
47 | .set noreorder | ||
48 | |||
49 | .align 5 | ||
50 | NESTED(vr41xx_handle_interrupt, PT_SIZE, ra) | ||
51 | .set noat | ||
52 | SAVE_ALL | ||
53 | CLI | ||
54 | .set at | ||
55 | .set noreorder | ||
56 | |||
57 | /* | ||
58 | * Get the pending interrupts | ||
59 | */ | ||
60 | mfc0 t0, CP0_CAUSE | ||
61 | mfc0 t1, CP0_STATUS | ||
62 | andi t0, 0xff00 | ||
63 | and t0, t0, t1 | ||
64 | |||
65 | andi t1, t0, CAUSEF_IP7 # MIPS timer interrupt | ||
66 | bnez t1, handle_irq | ||
67 | li a0, 7 | ||
68 | |||
69 | andi t1, t0, 0x7800 # check for Int1-4 | ||
70 | beqz t1, 1f | ||
71 | |||
72 | andi t1, t0, CAUSEF_IP3 # check for Int1 | ||
73 | bnez t1, handle_int | ||
74 | li a0, 3 | ||
75 | |||
76 | andi t1, t0, CAUSEF_IP4 # check for Int2 | ||
77 | bnez t1, handle_int | ||
78 | li a0, 4 | ||
79 | |||
80 | andi t1, t0, CAUSEF_IP5 # check for Int3 | ||
81 | bnez t1, handle_int | ||
82 | li a0, 5 | ||
83 | |||
84 | andi t1, t0, CAUSEF_IP6 # check for Int4 | ||
85 | bnez t1, handle_int | ||
86 | li a0, 6 | ||
87 | |||
88 | 1: | ||
89 | andi t1, t0, CAUSEF_IP2 # check for Int0 | ||
90 | bnez t1, handle_int | ||
91 | li a0, 2 | ||
92 | |||
93 | andi t1, t0, CAUSEF_IP0 # check for IP0 | ||
94 | bnez t1, handle_irq | ||
95 | li a0, 0 | ||
96 | |||
97 | andi t1, t0, CAUSEF_IP1 # check for IP1 | ||
98 | bnez t1, handle_irq | ||
99 | li a0, 1 | ||
100 | |||
101 | jal spurious_interrupt | ||
102 | nop | ||
103 | j ret_from_irq | ||
104 | nop | ||
105 | |||
106 | handle_int: | ||
107 | jal irq_dispatch | ||
108 | move a1, sp | ||
109 | j ret_from_irq | ||
110 | nop | ||
111 | |||
112 | handle_irq: | ||
113 | jal do_IRQ | ||
114 | move a1, sp | ||
115 | j ret_from_irq | ||
116 | END(vr41xx_handle_interrupt) | ||
diff --git a/arch/mips/vr41xx/common/irq.c b/arch/mips/vr41xx/common/irq.c index 61aa264275ff..86796bb63c3c 100644 --- a/arch/mips/vr41xx/common/irq.c +++ b/arch/mips/vr41xx/common/irq.c | |||
@@ -59,7 +59,7 @@ int cascade_irq(unsigned int irq, int (*get_irq)(unsigned int, struct pt_regs *) | |||
59 | 59 | ||
60 | EXPORT_SYMBOL_GPL(cascade_irq); | 60 | EXPORT_SYMBOL_GPL(cascade_irq); |
61 | 61 | ||
62 | asmlinkage void irq_dispatch(unsigned int irq, struct pt_regs *regs) | 62 | static void irq_dispatch(unsigned int irq, struct pt_regs *regs) |
63 | { | 63 | { |
64 | irq_cascade_t *cascade; | 64 | irq_cascade_t *cascade; |
65 | irq_desc_t *desc; | 65 | irq_desc_t *desc; |
@@ -84,11 +84,32 @@ asmlinkage void irq_dispatch(unsigned int irq, struct pt_regs *regs) | |||
84 | do_IRQ(irq, regs); | 84 | do_IRQ(irq, regs); |
85 | } | 85 | } |
86 | 86 | ||
87 | extern asmlinkage void vr41xx_handle_interrupt(void); | 87 | asmlinkage void plat_irq_dispatch(struct pt_regs *regs) |
88 | { | ||
89 | unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; | ||
90 | |||
91 | if (pending & CAUSEF_IP7) | ||
92 | do_IRQ(7, regs); | ||
93 | else if (pending & 0x7800) { | ||
94 | if (pending & CAUSEF_IP3) | ||
95 | irq_dispatch(3, regs); | ||
96 | else if (pending & CAUSEF_IP4) | ||
97 | irq_dispatch(4, regs); | ||
98 | else if (pending & CAUSEF_IP5) | ||
99 | irq_dispatch(5, regs); | ||
100 | else if (pending & CAUSEF_IP6) | ||
101 | irq_dispatch(6, regs); | ||
102 | } else if (pending & CAUSEF_IP2) | ||
103 | irq_dispatch(2, regs); | ||
104 | else if (pending & CAUSEF_IP0) | ||
105 | do_IRQ(0, regs); | ||
106 | else if (pending & CAUSEF_IP1) | ||
107 | do_IRQ(1, regs); | ||
108 | else | ||
109 | spurious_interrupt(regs); | ||
110 | } | ||
88 | 111 | ||
89 | void __init arch_init_irq(void) | 112 | void __init arch_init_irq(void) |
90 | { | 113 | { |
91 | mips_cpu_irq_init(MIPS_CPU_IRQ_BASE); | 114 | mips_cpu_irq_init(MIPS_CPU_IRQ_BASE); |
92 | |||
93 | set_except_vector(0, vr41xx_handle_interrupt); | ||
94 | } | 115 | } |