diff options
Diffstat (limited to 'arch')
241 files changed, 1944 insertions, 2067 deletions
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 63d7578856c1..a1dd2ee83753 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi | |||
@@ -29,6 +29,7 @@ | |||
29 | compatible = "arm,cortex-a9-gic"; | 29 | compatible = "arm,cortex-a9-gic"; |
30 | #interrupt-cells = <3>; | 30 | #interrupt-cells = <3>; |
31 | interrupt-controller; | 31 | interrupt-controller; |
32 | cpu-offset = <0x8000>; | ||
32 | reg = <0x10490000 0x1000>, <0x10480000 0x100>; | 33 | reg = <0x10490000 0x1000>, <0x10480000 0x100>; |
33 | }; | 34 | }; |
34 | 35 | ||
diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts index 1a1d7023b69b..825d2957da0b 100644 --- a/arch/arm/boot/dts/tegra-paz00.dts +++ b/arch/arm/boot/dts/tegra-paz00.dts | |||
@@ -46,11 +46,11 @@ | |||
46 | }; | 46 | }; |
47 | 47 | ||
48 | serial@70006200 { | 48 | serial@70006200 { |
49 | status = "disable"; | 49 | clock-frequency = <216000000>; |
50 | }; | 50 | }; |
51 | 51 | ||
52 | serial@70006300 { | 52 | serial@70006300 { |
53 | clock-frequency = <216000000>; | 53 | status = "disable"; |
54 | }; | 54 | }; |
55 | 55 | ||
56 | serial@70006400 { | 56 | serial@70006400 { |
@@ -60,7 +60,7 @@ | |||
60 | sdhci@c8000000 { | 60 | sdhci@c8000000 { |
61 | cd-gpios = <&gpio 173 0>; /* gpio PV5 */ | 61 | cd-gpios = <&gpio 173 0>; /* gpio PV5 */ |
62 | wp-gpios = <&gpio 57 0>; /* gpio PH1 */ | 62 | wp-gpios = <&gpio 57 0>; /* gpio PH1 */ |
63 | power-gpios = <&gpio 155 0>; /* gpio PT3 */ | 63 | power-gpios = <&gpio 169 0>; /* gpio PV1 */ |
64 | }; | 64 | }; |
65 | 65 | ||
66 | sdhci@c8000200 { | 66 | sdhci@c8000200 { |
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index d1bcd7b13ebc..fb1f1cfce60c 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c | |||
@@ -320,13 +320,6 @@ err0: | |||
320 | return -EBUSY; | 320 | return -EBUSY; |
321 | } | 321 | } |
322 | 322 | ||
323 | /* | ||
324 | * If we set up a device for bus mastering, we need to check the latency | ||
325 | * timer as we don't have even crappy BIOSes to set it properly. | ||
326 | * The implementation is from arch/i386/pci/i386.c | ||
327 | */ | ||
328 | unsigned int pcibios_max_latency = 255; | ||
329 | |||
330 | /* ITE bridge requires setting latency timer to avoid early bus access | 323 | /* ITE bridge requires setting latency timer to avoid early bus access |
331 | termination by PCI bus master devices | 324 | termination by PCI bus master devices |
332 | */ | 325 | */ |
diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c index d8e44a43047c..ff3ad2244824 100644 --- a/arch/arm/common/pl330.c +++ b/arch/arm/common/pl330.c | |||
@@ -1502,12 +1502,13 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op) | |||
1502 | struct pl330_thread *thrd = ch_id; | 1502 | struct pl330_thread *thrd = ch_id; |
1503 | struct pl330_dmac *pl330; | 1503 | struct pl330_dmac *pl330; |
1504 | unsigned long flags; | 1504 | unsigned long flags; |
1505 | int ret = 0, active = thrd->req_running; | 1505 | int ret = 0, active; |
1506 | 1506 | ||
1507 | if (!thrd || thrd->free || thrd->dmac->state == DYING) | 1507 | if (!thrd || thrd->free || thrd->dmac->state == DYING) |
1508 | return -EINVAL; | 1508 | return -EINVAL; |
1509 | 1509 | ||
1510 | pl330 = thrd->dmac; | 1510 | pl330 = thrd->dmac; |
1511 | active = thrd->req_running; | ||
1511 | 1512 | ||
1512 | spin_lock_irqsave(&pl330->lock, flags); | 1513 | spin_lock_irqsave(&pl330->lock, flags); |
1513 | 1514 | ||
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 62f8095d46de..23371b17b23e 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h | |||
@@ -137,6 +137,11 @@ | |||
137 | disable_irq | 137 | disable_irq |
138 | .endm | 138 | .endm |
139 | 139 | ||
140 | .macro save_and_disable_irqs_notrace, oldcpsr | ||
141 | mrs \oldcpsr, cpsr | ||
142 | disable_irq_notrace | ||
143 | .endm | ||
144 | |||
140 | /* | 145 | /* |
141 | * Restore interrupt state previously stored in a register. We don't | 146 | * Restore interrupt state previously stored in a register. We don't |
142 | * guarantee that this will preserve the flags. | 147 | * guarantee that this will preserve the flags. |
diff --git a/arch/arm/include/asm/hardware/pl330.h b/arch/arm/include/asm/hardware/pl330.h index 575fa8186ca0..c1821385abfa 100644 --- a/arch/arm/include/asm/hardware/pl330.h +++ b/arch/arm/include/asm/hardware/pl330.h | |||
@@ -41,7 +41,7 @@ enum pl330_dstcachectrl { | |||
41 | DCCTRL1, /* Bufferable only */ | 41 | DCCTRL1, /* Bufferable only */ |
42 | DCCTRL2, /* Cacheable, but do not allocate */ | 42 | DCCTRL2, /* Cacheable, but do not allocate */ |
43 | DCCTRL3, /* Cacheable and bufferable, but do not allocate */ | 43 | DCCTRL3, /* Cacheable and bufferable, but do not allocate */ |
44 | DINVALID1 = 8, | 44 | DINVALID1, /* AWCACHE = 0x1000 */ |
45 | DINVALID2, | 45 | DINVALID2, |
46 | DCCTRL6, /* Cacheable write-through, allocate on writes only */ | 46 | DCCTRL6, /* Cacheable write-through, allocate on writes only */ |
47 | DCCTRL7, /* Cacheable write-back, allocate on writes only */ | 47 | DCCTRL7, /* Cacheable write-back, allocate on writes only */ |
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index ce280b8d613c..cb8d638924fd 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h | |||
@@ -22,6 +22,7 @@ | |||
22 | #include <asm/hw_breakpoint.h> | 22 | #include <asm/hw_breakpoint.h> |
23 | #include <asm/ptrace.h> | 23 | #include <asm/ptrace.h> |
24 | #include <asm/types.h> | 24 | #include <asm/types.h> |
25 | #include <asm/system.h> | ||
25 | 26 | ||
26 | #ifdef __KERNEL__ | 27 | #ifdef __KERNEL__ |
27 | #define STACK_TOP ((current->personality & ADDR_LIMIT_32BIT) ? \ | 28 | #define STACK_TOP ((current->personality & ADDR_LIMIT_32BIT) ? \ |
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 5d3ed7e38561..314d4664eae7 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h | |||
@@ -198,7 +198,15 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, | |||
198 | unsigned long addr) | 198 | unsigned long addr) |
199 | { | 199 | { |
200 | pgtable_page_dtor(pte); | 200 | pgtable_page_dtor(pte); |
201 | tlb_add_flush(tlb, addr); | 201 | |
202 | /* | ||
203 | * With the classic ARM MMU, a pte page has two corresponding pmd | ||
204 | * entries, each covering 1MB. | ||
205 | */ | ||
206 | addr &= PMD_MASK; | ||
207 | tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE); | ||
208 | tlb_add_flush(tlb, addr + SZ_1M); | ||
209 | |||
202 | tlb_remove_page(tlb, pte); | 210 | tlb_remove_page(tlb, pte); |
203 | } | 211 | } |
204 | 212 | ||
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 3a456c6c7005..be16a48007b4 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S | |||
@@ -790,7 +790,7 @@ __kuser_cmpxchg64: @ 0xffff0f60 | |||
790 | smp_dmb arm | 790 | smp_dmb arm |
791 | rsbs r0, r3, #0 @ set returned val and C flag | 791 | rsbs r0, r3, #0 @ set returned val and C flag |
792 | ldmfd sp!, {r4, r5, r6, r7} | 792 | ldmfd sp!, {r4, r5, r6, r7} |
793 | bx lr | 793 | usr_ret lr |
794 | 794 | ||
795 | #elif !defined(CONFIG_SMP) | 795 | #elif !defined(CONFIG_SMP) |
796 | 796 | ||
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 460bbbb6b885..6933244c68f9 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c | |||
@@ -469,6 +469,20 @@ static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] | |||
469 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | 469 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, |
470 | }, | 470 | }, |
471 | }, | 471 | }, |
472 | [C(NODE)] = { | ||
473 | [C(OP_READ)] = { | ||
474 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | ||
475 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | ||
476 | }, | ||
477 | [C(OP_WRITE)] = { | ||
478 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | ||
479 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | ||
480 | }, | ||
481 | [C(OP_PREFETCH)] = { | ||
482 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | ||
483 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | ||
484 | }, | ||
485 | }, | ||
472 | }; | 486 | }; |
473 | 487 | ||
474 | /* | 488 | /* |
@@ -579,6 +593,20 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] | |||
579 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | 593 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, |
580 | }, | 594 | }, |
581 | }, | 595 | }, |
596 | [C(NODE)] = { | ||
597 | [C(OP_READ)] = { | ||
598 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | ||
599 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | ||
600 | }, | ||
601 | [C(OP_WRITE)] = { | ||
602 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | ||
603 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | ||
604 | }, | ||
605 | [C(OP_PREFETCH)] = { | ||
606 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | ||
607 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | ||
608 | }, | ||
609 | }, | ||
582 | }; | 610 | }; |
583 | 611 | ||
584 | /* | 612 | /* |
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index e1d5e1929fbd..ede6443c34d9 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c | |||
@@ -23,6 +23,7 @@ | |||
23 | #include <linux/perf_event.h> | 23 | #include <linux/perf_event.h> |
24 | #include <linux/hw_breakpoint.h> | 24 | #include <linux/hw_breakpoint.h> |
25 | #include <linux/regset.h> | 25 | #include <linux/regset.h> |
26 | #include <linux/audit.h> | ||
26 | 27 | ||
27 | #include <asm/pgtable.h> | 28 | #include <asm/pgtable.h> |
28 | #include <asm/system.h> | 29 | #include <asm/system.h> |
@@ -699,10 +700,13 @@ static int vfp_set(struct task_struct *target, | |||
699 | { | 700 | { |
700 | int ret; | 701 | int ret; |
701 | struct thread_info *thread = task_thread_info(target); | 702 | struct thread_info *thread = task_thread_info(target); |
702 | struct vfp_hard_struct new_vfp = thread->vfpstate.hard; | 703 | struct vfp_hard_struct new_vfp; |
703 | const size_t user_fpregs_offset = offsetof(struct user_vfp, fpregs); | 704 | const size_t user_fpregs_offset = offsetof(struct user_vfp, fpregs); |
704 | const size_t user_fpscr_offset = offsetof(struct user_vfp, fpscr); | 705 | const size_t user_fpscr_offset = offsetof(struct user_vfp, fpscr); |
705 | 706 | ||
707 | vfp_sync_hwstate(thread); | ||
708 | new_vfp = thread->vfpstate.hard; | ||
709 | |||
706 | ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, | 710 | ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, |
707 | &new_vfp.fpregs, | 711 | &new_vfp.fpregs, |
708 | user_fpregs_offset, | 712 | user_fpregs_offset, |
@@ -723,9 +727,8 @@ static int vfp_set(struct task_struct *target, | |||
723 | if (ret) | 727 | if (ret) |
724 | return ret; | 728 | return ret; |
725 | 729 | ||
726 | vfp_sync_hwstate(thread); | ||
727 | thread->vfpstate.hard = new_vfp; | ||
728 | vfp_flush_hwstate(thread); | 730 | vfp_flush_hwstate(thread); |
731 | thread->vfpstate.hard = new_vfp; | ||
729 | 732 | ||
730 | return 0; | 733 | return 0; |
731 | } | 734 | } |
@@ -902,6 +905,12 @@ long arch_ptrace(struct task_struct *child, long request, | |||
902 | return ret; | 905 | return ret; |
903 | } | 906 | } |
904 | 907 | ||
908 | #ifdef __ARMEB__ | ||
909 | #define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB | ||
910 | #else | ||
911 | #define AUDIT_ARCH_NR AUDIT_ARCH_ARM | ||
912 | #endif | ||
913 | |||
905 | asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) | 914 | asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) |
906 | { | 915 | { |
907 | unsigned long ip; | 916 | unsigned long ip; |
@@ -916,7 +925,7 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) | |||
916 | if (!ip) | 925 | if (!ip) |
917 | audit_syscall_exit(regs); | 926 | audit_syscall_exit(regs); |
918 | else | 927 | else |
919 | audit_syscall_entry(AUDIT_ARCH_ARMEB, scno, regs->ARM_r0, | 928 | audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0, |
920 | regs->ARM_r1, regs->ARM_r2, regs->ARM_r3); | 929 | regs->ARM_r1, regs->ARM_r2, regs->ARM_r3); |
921 | 930 | ||
922 | if (!test_thread_flag(TIF_SYSCALL_TRACE)) | 931 | if (!test_thread_flag(TIF_SYSCALL_TRACE)) |
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 0340224cf73c..9e617bd4a146 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c | |||
@@ -227,6 +227,8 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame) | |||
227 | if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE) | 227 | if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE) |
228 | return -EINVAL; | 228 | return -EINVAL; |
229 | 229 | ||
230 | vfp_flush_hwstate(thread); | ||
231 | |||
230 | /* | 232 | /* |
231 | * Copy the floating point registers. There can be unused | 233 | * Copy the floating point registers. There can be unused |
232 | * registers see asm/hwcap.h for details. | 234 | * registers see asm/hwcap.h for details. |
@@ -251,9 +253,6 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame) | |||
251 | __get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err); | 253 | __get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err); |
252 | __get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err); | 254 | __get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err); |
253 | 255 | ||
254 | if (!err) | ||
255 | vfp_flush_hwstate(thread); | ||
256 | |||
257 | return err ? -EFAULT : 0; | 256 | return err ? -EFAULT : 0; |
258 | } | 257 | } |
259 | 258 | ||
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 4285daa077b0..7a79b24597b2 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c | |||
@@ -129,7 +129,7 @@ static struct notifier_block twd_cpufreq_nb = { | |||
129 | 129 | ||
130 | static int twd_cpufreq_init(void) | 130 | static int twd_cpufreq_init(void) |
131 | { | 131 | { |
132 | if (!IS_ERR(twd_clk)) | 132 | if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk)) |
133 | return cpufreq_register_notifier(&twd_cpufreq_nb, | 133 | return cpufreq_register_notifier(&twd_cpufreq_nb, |
134 | CPUFREQ_TRANSITION_NOTIFIER); | 134 | CPUFREQ_TRANSITION_NOTIFIER); |
135 | 135 | ||
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 99a572702509..f84dfe67724f 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c | |||
@@ -266,6 +266,7 @@ void die(const char *str, struct pt_regs *regs, int err) | |||
266 | { | 266 | { |
267 | struct thread_info *thread = current_thread_info(); | 267 | struct thread_info *thread = current_thread_info(); |
268 | int ret; | 268 | int ret; |
269 | enum bug_trap_type bug_type = BUG_TRAP_TYPE_NONE; | ||
269 | 270 | ||
270 | oops_enter(); | 271 | oops_enter(); |
271 | 272 | ||
@@ -273,7 +274,9 @@ void die(const char *str, struct pt_regs *regs, int err) | |||
273 | console_verbose(); | 274 | console_verbose(); |
274 | bust_spinlocks(1); | 275 | bust_spinlocks(1); |
275 | if (!user_mode(regs)) | 276 | if (!user_mode(regs)) |
276 | report_bug(regs->ARM_pc, regs); | 277 | bug_type = report_bug(regs->ARM_pc, regs); |
278 | if (bug_type != BUG_TRAP_TYPE_NONE) | ||
279 | str = "Oops - BUG"; | ||
277 | ret = __die(str, err, thread, regs); | 280 | ret = __die(str, err, thread, regs); |
278 | 281 | ||
279 | if (regs && kexec_should_crash(thread->task)) | 282 | if (regs && kexec_should_crash(thread->task)) |
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 1e19691e0406..43a31fb06318 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S | |||
@@ -10,6 +10,7 @@ | |||
10 | #include <asm/page.h> | 10 | #include <asm/page.h> |
11 | 11 | ||
12 | #define PROC_INFO \ | 12 | #define PROC_INFO \ |
13 | . = ALIGN(4); \ | ||
13 | VMLINUX_SYMBOL(__proc_info_begin) = .; \ | 14 | VMLINUX_SYMBOL(__proc_info_begin) = .; \ |
14 | *(.proc.info.init) \ | 15 | *(.proc.info.init) \ |
15 | VMLINUX_SYMBOL(__proc_info_end) = .; | 16 | VMLINUX_SYMBOL(__proc_info_end) = .; |
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 18bacec2b094..97676bdae998 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c | |||
@@ -83,7 +83,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} | |||
83 | * USB Device (Gadget) | 83 | * USB Device (Gadget) |
84 | * -------------------------------------------------------------------- */ | 84 | * -------------------------------------------------------------------- */ |
85 | 85 | ||
86 | #ifdef CONFIG_USB_AT91 | 86 | #if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) |
87 | static struct at91_udc_data udc_data; | 87 | static struct at91_udc_data udc_data; |
88 | 88 | ||
89 | static struct resource udc_resources[] = { | 89 | static struct resource udc_resources[] = { |
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 642ccb6d26b2..5a24f0b4554d 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c | |||
@@ -84,7 +84,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} | |||
84 | * USB Device (Gadget) | 84 | * USB Device (Gadget) |
85 | * -------------------------------------------------------------------- */ | 85 | * -------------------------------------------------------------------- */ |
86 | 86 | ||
87 | #ifdef CONFIG_USB_AT91 | 87 | #if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) |
88 | static struct at91_udc_data udc_data; | 88 | static struct at91_udc_data udc_data; |
89 | 89 | ||
90 | static struct resource udc_resources[] = { | 90 | static struct resource udc_resources[] = { |
@@ -1215,8 +1215,7 @@ void __init at91_add_device_serial(void) {} | |||
1215 | * CF/IDE | 1215 | * CF/IDE |
1216 | * -------------------------------------------------------------------- */ | 1216 | * -------------------------------------------------------------------- */ |
1217 | 1217 | ||
1218 | #if defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) || \ | 1218 | #if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \ |
1219 | defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \ | ||
1220 | defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) | 1219 | defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) |
1221 | 1220 | ||
1222 | static struct at91_cf_data cf0_data; | 1221 | static struct at91_cf_data cf0_data; |
@@ -1313,10 +1312,8 @@ void __init at91_add_device_cf(struct at91_cf_data *data) | |||
1313 | if (data->flags & AT91_CF_TRUE_IDE) | 1312 | if (data->flags & AT91_CF_TRUE_IDE) |
1314 | #if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) | 1313 | #if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) |
1315 | pdev->name = "pata_at91"; | 1314 | pdev->name = "pata_at91"; |
1316 | #elif defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) | ||
1317 | pdev->name = "at91_ide"; | ||
1318 | #else | 1315 | #else |
1319 | #warning "board requires AT91_CF_TRUE_IDE: enable either at91_ide or pata_at91" | 1316 | #warning "board requires AT91_CF_TRUE_IDE: enable pata_at91" |
1320 | #endif | 1317 | #endif |
1321 | else | 1318 | else |
1322 | pdev->name = "at91_cf"; | 1319 | pdev->name = "at91_cf"; |
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index fc59cbdb0e3c..1e28bed8f425 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c | |||
@@ -87,7 +87,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} | |||
87 | * USB Device (Gadget) | 87 | * USB Device (Gadget) |
88 | * -------------------------------------------------------------------- */ | 88 | * -------------------------------------------------------------------- */ |
89 | 89 | ||
90 | #ifdef CONFIG_USB_AT91 | 90 | #if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) |
91 | static struct at91_udc_data udc_data; | 91 | static struct at91_udc_data udc_data; |
92 | 92 | ||
93 | static struct resource udc_resources[] = { | 93 | static struct resource udc_resources[] = { |
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 7b46b2787022..366a7765635b 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c | |||
@@ -92,7 +92,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} | |||
92 | * USB Device (Gadget) | 92 | * USB Device (Gadget) |
93 | * -------------------------------------------------------------------- */ | 93 | * -------------------------------------------------------------------- */ |
94 | 94 | ||
95 | #ifdef CONFIG_USB_AT91 | 95 | #if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) |
96 | static struct at91_udc_data udc_data; | 96 | static struct at91_udc_data udc_data; |
97 | 97 | ||
98 | static struct resource udc_resources[] = { | 98 | static struct resource udc_resources[] = { |
@@ -355,8 +355,8 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} | |||
355 | * Compact Flash (PCMCIA or IDE) | 355 | * Compact Flash (PCMCIA or IDE) |
356 | * -------------------------------------------------------------------- */ | 356 | * -------------------------------------------------------------------- */ |
357 | 357 | ||
358 | #if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \ | 358 | #if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \ |
359 | defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) | 359 | defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) |
360 | 360 | ||
361 | static struct at91_cf_data cf0_data; | 361 | static struct at91_cf_data cf0_data; |
362 | 362 | ||
@@ -450,7 +450,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data) | |||
450 | at91_set_A_periph(AT91_PIN_PD9, 0); /* CFCE2 */ | 450 | at91_set_A_periph(AT91_PIN_PD9, 0); /* CFCE2 */ |
451 | at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */ | 451 | at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */ |
452 | 452 | ||
453 | pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf"; | 453 | pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "pata_at91" : "at91_cf"; |
454 | platform_device_register(pdev); | 454 | platform_device_register(pdev); |
455 | } | 455 | } |
456 | #else | 456 | #else |
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_smc.h b/arch/arm/mach-at91/include/mach/at91sam9_smc.h index eb18a70fa647..175e1fdd9fe8 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9_smc.h +++ b/arch/arm/mach-at91/include/mach/at91sam9_smc.h | |||
@@ -18,6 +18,35 @@ | |||
18 | 18 | ||
19 | #include <mach/cpu.h> | 19 | #include <mach/cpu.h> |
20 | 20 | ||
21 | #ifndef __ASSEMBLY__ | ||
22 | struct sam9_smc_config { | ||
23 | /* Setup register */ | ||
24 | u8 ncs_read_setup; | ||
25 | u8 nrd_setup; | ||
26 | u8 ncs_write_setup; | ||
27 | u8 nwe_setup; | ||
28 | |||
29 | /* Pulse register */ | ||
30 | u8 ncs_read_pulse; | ||
31 | u8 nrd_pulse; | ||
32 | u8 ncs_write_pulse; | ||
33 | u8 nwe_pulse; | ||
34 | |||
35 | /* Cycle register */ | ||
36 | u16 read_cycle; | ||
37 | u16 write_cycle; | ||
38 | |||
39 | /* Mode register */ | ||
40 | u32 mode; | ||
41 | u8 tdf_cycles:4; | ||
42 | }; | ||
43 | |||
44 | extern void sam9_smc_configure(int id, int cs, struct sam9_smc_config *config); | ||
45 | extern void sam9_smc_read(int id, int cs, struct sam9_smc_config *config); | ||
46 | extern void sam9_smc_read_mode(int id, int cs, struct sam9_smc_config *config); | ||
47 | extern void sam9_smc_write_mode(int id, int cs, struct sam9_smc_config *config); | ||
48 | #endif | ||
49 | |||
21 | #define AT91_SMC_SETUP 0x00 /* Setup Register for CS n */ | 50 | #define AT91_SMC_SETUP 0x00 /* Setup Register for CS n */ |
22 | #define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */ | 51 | #define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */ |
23 | #define AT91_SMC_NWESETUP_(x) ((x) << 0) | 52 | #define AT91_SMC_NWESETUP_(x) ((x) << 0) |
diff --git a/arch/arm/mach-at91/sam9_smc.c b/arch/arm/mach-at91/sam9_smc.c index 8294783b679d..99a0a1d2b7dc 100644 --- a/arch/arm/mach-at91/sam9_smc.c +++ b/arch/arm/mach-at91/sam9_smc.c | |||
@@ -2,6 +2,7 @@ | |||
2 | * linux/arch/arm/mach-at91/sam9_smc.c | 2 | * linux/arch/arm/mach-at91/sam9_smc.c |
3 | * | 3 | * |
4 | * Copyright (C) 2008 Andrew Victor | 4 | * Copyright (C) 2008 Andrew Victor |
5 | * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | ||
5 | * | 6 | * |
6 | * This program is free software; you can redistribute it and/or modify | 7 | * This program is free software; you can redistribute it and/or modify |
7 | * it under the terms of the GNU General Public License version 2 as | 8 | * it under the terms of the GNU General Public License version 2 as |
@@ -22,7 +23,22 @@ | |||
22 | 23 | ||
23 | static void __iomem *smc_base_addr[2]; | 24 | static void __iomem *smc_base_addr[2]; |
24 | 25 | ||
25 | static void __init sam9_smc_cs_configure(void __iomem *base, struct sam9_smc_config* config) | 26 | static void sam9_smc_cs_write_mode(void __iomem *base, |
27 | struct sam9_smc_config *config) | ||
28 | { | ||
29 | __raw_writel(config->mode | ||
30 | | AT91_SMC_TDF_(config->tdf_cycles), | ||
31 | base + AT91_SMC_MODE); | ||
32 | } | ||
33 | |||
34 | void sam9_smc_write_mode(int id, int cs, | ||
35 | struct sam9_smc_config *config) | ||
36 | { | ||
37 | sam9_smc_cs_write_mode(AT91_SMC_CS(id, cs), config); | ||
38 | } | ||
39 | |||
40 | static void sam9_smc_cs_configure(void __iomem *base, | ||
41 | struct sam9_smc_config *config) | ||
26 | { | 42 | { |
27 | 43 | ||
28 | /* Setup register */ | 44 | /* Setup register */ |
@@ -45,16 +61,66 @@ static void __init sam9_smc_cs_configure(void __iomem *base, struct sam9_smc_con | |||
45 | base + AT91_SMC_CYCLE); | 61 | base + AT91_SMC_CYCLE); |
46 | 62 | ||
47 | /* Mode register */ | 63 | /* Mode register */ |
48 | __raw_writel(config->mode | 64 | sam9_smc_cs_write_mode(base, config); |
49 | | AT91_SMC_TDF_(config->tdf_cycles), | ||
50 | base + AT91_SMC_MODE); | ||
51 | } | 65 | } |
52 | 66 | ||
53 | void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config) | 67 | void sam9_smc_configure(int id, int cs, |
68 | struct sam9_smc_config *config) | ||
54 | { | 69 | { |
55 | sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config); | 70 | sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config); |
56 | } | 71 | } |
57 | 72 | ||
73 | static void sam9_smc_cs_read_mode(void __iomem *base, | ||
74 | struct sam9_smc_config *config) | ||
75 | { | ||
76 | u32 val = __raw_readl(base + AT91_SMC_MODE); | ||
77 | |||
78 | config->mode = (val & ~AT91_SMC_NWECYCLE); | ||
79 | config->tdf_cycles = (val & AT91_SMC_NWECYCLE) >> 16 ; | ||
80 | } | ||
81 | |||
82 | void sam9_smc_read_mode(int id, int cs, | ||
83 | struct sam9_smc_config *config) | ||
84 | { | ||
85 | sam9_smc_cs_read_mode(AT91_SMC_CS(id, cs), config); | ||
86 | } | ||
87 | |||
88 | static void sam9_smc_cs_read(void __iomem *base, | ||
89 | struct sam9_smc_config *config) | ||
90 | { | ||
91 | u32 val; | ||
92 | |||
93 | /* Setup register */ | ||
94 | val = __raw_readl(base + AT91_SMC_SETUP); | ||
95 | |||
96 | config->nwe_setup = val & AT91_SMC_NWESETUP; | ||
97 | config->ncs_write_setup = (val & AT91_SMC_NCS_WRSETUP) >> 8; | ||
98 | config->nrd_setup = (val & AT91_SMC_NRDSETUP) >> 16; | ||
99 | config->ncs_read_setup = (val & AT91_SMC_NCS_RDSETUP) >> 24; | ||
100 | |||
101 | /* Pulse register */ | ||
102 | val = __raw_readl(base + AT91_SMC_PULSE); | ||
103 | |||
104 | config->nwe_setup = val & AT91_SMC_NWEPULSE; | ||
105 | config->ncs_write_pulse = (val & AT91_SMC_NCS_WRPULSE) >> 8; | ||
106 | config->nrd_pulse = (val & AT91_SMC_NRDPULSE) >> 16; | ||
107 | config->ncs_read_pulse = (val & AT91_SMC_NCS_RDPULSE) >> 24; | ||
108 | |||
109 | /* Cycle register */ | ||
110 | val = __raw_readl(base + AT91_SMC_CYCLE); | ||
111 | |||
112 | config->write_cycle = val & AT91_SMC_NWECYCLE; | ||
113 | config->read_cycle = (val & AT91_SMC_NRDCYCLE) >> 16; | ||
114 | |||
115 | /* Mode register */ | ||
116 | sam9_smc_cs_read_mode(base, config); | ||
117 | } | ||
118 | |||
119 | void sam9_smc_read(int id, int cs, struct sam9_smc_config *config) | ||
120 | { | ||
121 | sam9_smc_cs_read(AT91_SMC_CS(id, cs), config); | ||
122 | } | ||
123 | |||
58 | void __init at91sam9_ioremap_smc(int id, u32 addr) | 124 | void __init at91sam9_ioremap_smc(int id, u32 addr) |
59 | { | 125 | { |
60 | if (id > 1) { | 126 | if (id > 1) { |
diff --git a/arch/arm/mach-at91/sam9_smc.h b/arch/arm/mach-at91/sam9_smc.h index 039c5ce17aec..3e52dcd4a59f 100644 --- a/arch/arm/mach-at91/sam9_smc.h +++ b/arch/arm/mach-at91/sam9_smc.h | |||
@@ -8,27 +8,4 @@ | |||
8 | * published by the Free Software Foundation. | 8 | * published by the Free Software Foundation. |
9 | */ | 9 | */ |
10 | 10 | ||
11 | struct sam9_smc_config { | ||
12 | /* Setup register */ | ||
13 | u8 ncs_read_setup; | ||
14 | u8 nrd_setup; | ||
15 | u8 ncs_write_setup; | ||
16 | u8 nwe_setup; | ||
17 | |||
18 | /* Pulse register */ | ||
19 | u8 ncs_read_pulse; | ||
20 | u8 nrd_pulse; | ||
21 | u8 ncs_write_pulse; | ||
22 | u8 nwe_pulse; | ||
23 | |||
24 | /* Cycle register */ | ||
25 | u16 read_cycle; | ||
26 | u16 write_cycle; | ||
27 | |||
28 | /* Mode register */ | ||
29 | u32 mode; | ||
30 | u8 tdf_cycles:4; | ||
31 | }; | ||
32 | |||
33 | extern void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config); | ||
34 | extern void __init at91sam9_ioremap_smc(int id, u32 addr); | 11 | extern void __init at91sam9_ioremap_smc(int id, u32 addr); |
diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c index 9e5e7552498c..45c97b1ee9b1 100644 --- a/arch/arm/mach-bcmring/arch.c +++ b/arch/arm/mach-bcmring/arch.c | |||
@@ -194,6 +194,6 @@ MACHINE_START(BCMRING, "BCMRING") | |||
194 | .init_early = bcmring_init_early, | 194 | .init_early = bcmring_init_early, |
195 | .init_irq = bcmring_init_irq, | 195 | .init_irq = bcmring_init_irq, |
196 | .timer = &bcmring_timer, | 196 | .timer = &bcmring_timer, |
197 | .init_machine = bcmring_init_machine | 197 | .init_machine = bcmring_init_machine, |
198 | .restart = bcmring_restart, | 198 | .restart = bcmring_restart, |
199 | MACHINE_END | 199 | MACHINE_END |
diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c index 1a1a27dd5654..1024396797e1 100644 --- a/arch/arm/mach-bcmring/dma.c +++ b/arch/arm/mach-bcmring/dma.c | |||
@@ -33,17 +33,11 @@ | |||
33 | 33 | ||
34 | #include <mach/timer.h> | 34 | #include <mach/timer.h> |
35 | 35 | ||
36 | #include <linux/mm.h> | ||
37 | #include <linux/pfn.h> | 36 | #include <linux/pfn.h> |
38 | #include <linux/atomic.h> | 37 | #include <linux/atomic.h> |
39 | #include <linux/sched.h> | 38 | #include <linux/sched.h> |
40 | #include <mach/dma.h> | 39 | #include <mach/dma.h> |
41 | 40 | ||
42 | /* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */ | ||
43 | /* especially since dc4 doesn't use kmalloc'd memory. */ | ||
44 | |||
45 | #define ALLOW_MAP_OF_KMALLOC_MEMORY 0 | ||
46 | |||
47 | /* ---- Public Variables ------------------------------------------------- */ | 41 | /* ---- Public Variables ------------------------------------------------- */ |
48 | 42 | ||
49 | /* ---- Private Constants and Types -------------------------------------- */ | 43 | /* ---- Private Constants and Types -------------------------------------- */ |
@@ -53,24 +47,12 @@ | |||
53 | #define CONTROLLER_FROM_HANDLE(handle) (((handle) >> 4) & 0x0f) | 47 | #define CONTROLLER_FROM_HANDLE(handle) (((handle) >> 4) & 0x0f) |
54 | #define CHANNEL_FROM_HANDLE(handle) ((handle) & 0x0f) | 48 | #define CHANNEL_FROM_HANDLE(handle) ((handle) & 0x0f) |
55 | 49 | ||
56 | #define DMA_MAP_DEBUG 0 | ||
57 | |||
58 | #if DMA_MAP_DEBUG | ||
59 | # define DMA_MAP_PRINT(fmt, args...) printk("%s: " fmt, __func__, ## args) | ||
60 | #else | ||
61 | # define DMA_MAP_PRINT(fmt, args...) | ||
62 | #endif | ||
63 | 50 | ||
64 | /* ---- Private Variables ------------------------------------------------ */ | 51 | /* ---- Private Variables ------------------------------------------------ */ |
65 | 52 | ||
66 | static DMA_Global_t gDMA; | 53 | static DMA_Global_t gDMA; |
67 | static struct proc_dir_entry *gDmaDir; | 54 | static struct proc_dir_entry *gDmaDir; |
68 | 55 | ||
69 | static atomic_t gDmaStatMemTypeKmalloc = ATOMIC_INIT(0); | ||
70 | static atomic_t gDmaStatMemTypeVmalloc = ATOMIC_INIT(0); | ||
71 | static atomic_t gDmaStatMemTypeUser = ATOMIC_INIT(0); | ||
72 | static atomic_t gDmaStatMemTypeCoherent = ATOMIC_INIT(0); | ||
73 | |||
74 | #include "dma_device.c" | 56 | #include "dma_device.c" |
75 | 57 | ||
76 | /* ---- Private Function Prototypes -------------------------------------- */ | 58 | /* ---- Private Function Prototypes -------------------------------------- */ |
@@ -79,34 +61,6 @@ static atomic_t gDmaStatMemTypeCoherent = ATOMIC_INIT(0); | |||
79 | 61 | ||
80 | /****************************************************************************/ | 62 | /****************************************************************************/ |
81 | /** | 63 | /** |
82 | * Displays information for /proc/dma/mem-type | ||
83 | */ | ||
84 | /****************************************************************************/ | ||
85 | |||
86 | static int dma_proc_read_mem_type(char *buf, char **start, off_t offset, | ||
87 | int count, int *eof, void *data) | ||
88 | { | ||
89 | int len = 0; | ||
90 | |||
91 | len += sprintf(buf + len, "dma_map_mem statistics\n"); | ||
92 | len += | ||
93 | sprintf(buf + len, "coherent: %d\n", | ||
94 | atomic_read(&gDmaStatMemTypeCoherent)); | ||
95 | len += | ||
96 | sprintf(buf + len, "kmalloc: %d\n", | ||
97 | atomic_read(&gDmaStatMemTypeKmalloc)); | ||
98 | len += | ||
99 | sprintf(buf + len, "vmalloc: %d\n", | ||
100 | atomic_read(&gDmaStatMemTypeVmalloc)); | ||
101 | len += | ||
102 | sprintf(buf + len, "user: %d\n", | ||
103 | atomic_read(&gDmaStatMemTypeUser)); | ||
104 | |||
105 | return len; | ||
106 | } | ||
107 | |||
108 | /****************************************************************************/ | ||
109 | /** | ||
110 | * Displays information for /proc/dma/channels | 64 | * Displays information for /proc/dma/channels |
111 | */ | 65 | */ |
112 | /****************************************************************************/ | 66 | /****************************************************************************/ |
@@ -846,8 +800,6 @@ int dma_init(void) | |||
846 | dma_proc_read_channels, NULL); | 800 | dma_proc_read_channels, NULL); |
847 | create_proc_read_entry("devices", 0, gDmaDir, | 801 | create_proc_read_entry("devices", 0, gDmaDir, |
848 | dma_proc_read_devices, NULL); | 802 | dma_proc_read_devices, NULL); |
849 | create_proc_read_entry("mem-type", 0, gDmaDir, | ||
850 | dma_proc_read_mem_type, NULL); | ||
851 | } | 803 | } |
852 | 804 | ||
853 | out: | 805 | out: |
@@ -1565,767 +1517,3 @@ int dma_set_device_handler(DMA_Device_t dev, /* Device to set the callback for. | |||
1565 | } | 1517 | } |
1566 | 1518 | ||
1567 | EXPORT_SYMBOL(dma_set_device_handler); | 1519 | EXPORT_SYMBOL(dma_set_device_handler); |
1568 | |||
1569 | /****************************************************************************/ | ||
1570 | /** | ||
1571 | * Initializes a memory mapping structure | ||
1572 | */ | ||
1573 | /****************************************************************************/ | ||
1574 | |||
1575 | int dma_init_mem_map(DMA_MemMap_t *memMap) | ||
1576 | { | ||
1577 | memset(memMap, 0, sizeof(*memMap)); | ||
1578 | |||
1579 | sema_init(&memMap->lock, 1); | ||
1580 | |||
1581 | return 0; | ||
1582 | } | ||
1583 | |||
1584 | EXPORT_SYMBOL(dma_init_mem_map); | ||
1585 | |||
1586 | /****************************************************************************/ | ||
1587 | /** | ||
1588 | * Releases any memory currently being held by a memory mapping structure. | ||
1589 | */ | ||
1590 | /****************************************************************************/ | ||
1591 | |||
1592 | int dma_term_mem_map(DMA_MemMap_t *memMap) | ||
1593 | { | ||
1594 | down(&memMap->lock); /* Just being paranoid */ | ||
1595 | |||
1596 | /* Free up any allocated memory */ | ||
1597 | |||
1598 | up(&memMap->lock); | ||
1599 | memset(memMap, 0, sizeof(*memMap)); | ||
1600 | |||
1601 | return 0; | ||
1602 | } | ||
1603 | |||
1604 | EXPORT_SYMBOL(dma_term_mem_map); | ||
1605 | |||
1606 | /****************************************************************************/ | ||
1607 | /** | ||
1608 | * Looks at a memory address and categorizes it. | ||
1609 | * | ||
1610 | * @return One of the values from the DMA_MemType_t enumeration. | ||
1611 | */ | ||
1612 | /****************************************************************************/ | ||
1613 | |||
1614 | DMA_MemType_t dma_mem_type(void *addr) | ||
1615 | { | ||
1616 | unsigned long addrVal = (unsigned long)addr; | ||
1617 | |||
1618 | if (addrVal >= CONSISTENT_BASE) { | ||
1619 | /* NOTE: DMA virtual memory space starts at 0xFFxxxxxx */ | ||
1620 | |||
1621 | /* dma_alloc_xxx pages are physically and virtually contiguous */ | ||
1622 | |||
1623 | return DMA_MEM_TYPE_DMA; | ||
1624 | } | ||
1625 | |||
1626 | /* Technically, we could add one more classification. Addresses between VMALLOC_END */ | ||
1627 | /* and the beginning of the DMA virtual address could be considered to be I/O space. */ | ||
1628 | /* Right now, nobody cares about this particular classification, so we ignore it. */ | ||
1629 | |||
1630 | if (is_vmalloc_addr(addr)) { | ||
1631 | /* Address comes from the vmalloc'd region. Pages are virtually */ | ||
1632 | /* contiguous but NOT physically contiguous */ | ||
1633 | |||
1634 | return DMA_MEM_TYPE_VMALLOC; | ||
1635 | } | ||
1636 | |||
1637 | if (addrVal >= PAGE_OFFSET) { | ||
1638 | /* PAGE_OFFSET is typically 0xC0000000 */ | ||
1639 | |||
1640 | /* kmalloc'd pages are physically contiguous */ | ||
1641 | |||
1642 | return DMA_MEM_TYPE_KMALLOC; | ||
1643 | } | ||
1644 | |||
1645 | return DMA_MEM_TYPE_USER; | ||
1646 | } | ||
1647 | |||
1648 | EXPORT_SYMBOL(dma_mem_type); | ||
1649 | |||
1650 | /****************************************************************************/ | ||
1651 | /** | ||
1652 | * Looks at a memory address and determines if we support DMA'ing to/from | ||
1653 | * that type of memory. | ||
1654 | * | ||
1655 | * @return boolean - | ||
1656 | * return value != 0 means dma supported | ||
1657 | * return value == 0 means dma not supported | ||
1658 | */ | ||
1659 | /****************************************************************************/ | ||
1660 | |||
1661 | int dma_mem_supports_dma(void *addr) | ||
1662 | { | ||
1663 | DMA_MemType_t memType = dma_mem_type(addr); | ||
1664 | |||
1665 | return (memType == DMA_MEM_TYPE_DMA) | ||
1666 | #if ALLOW_MAP_OF_KMALLOC_MEMORY | ||
1667 | || (memType == DMA_MEM_TYPE_KMALLOC) | ||
1668 | #endif | ||
1669 | || (memType == DMA_MEM_TYPE_USER); | ||
1670 | } | ||
1671 | |||
1672 | EXPORT_SYMBOL(dma_mem_supports_dma); | ||
1673 | |||
1674 | /****************************************************************************/ | ||
1675 | /** | ||
1676 | * Maps in a memory region such that it can be used for performing a DMA. | ||
1677 | * | ||
1678 | * @return | ||
1679 | */ | ||
1680 | /****************************************************************************/ | ||
1681 | |||
1682 | int dma_map_start(DMA_MemMap_t *memMap, /* Stores state information about the map */ | ||
1683 | enum dma_data_direction dir /* Direction that the mapping will be going */ | ||
1684 | ) { | ||
1685 | int rc; | ||
1686 | |||
1687 | down(&memMap->lock); | ||
1688 | |||
1689 | DMA_MAP_PRINT("memMap: %p\n", memMap); | ||
1690 | |||
1691 | if (memMap->inUse) { | ||
1692 | printk(KERN_ERR "%s: memory map %p is already being used\n", | ||
1693 | __func__, memMap); | ||
1694 | rc = -EBUSY; | ||
1695 | goto out; | ||
1696 | } | ||
1697 | |||
1698 | memMap->inUse = 1; | ||
1699 | memMap->dir = dir; | ||
1700 | memMap->numRegionsUsed = 0; | ||
1701 | |||
1702 | rc = 0; | ||
1703 | |||
1704 | out: | ||
1705 | |||
1706 | DMA_MAP_PRINT("returning %d", rc); | ||
1707 | |||
1708 | up(&memMap->lock); | ||
1709 | |||
1710 | return rc; | ||
1711 | } | ||
1712 | |||
1713 | EXPORT_SYMBOL(dma_map_start); | ||
1714 | |||
1715 | /****************************************************************************/ | ||
1716 | /** | ||
1717 | * Adds a segment of memory to a memory map. Each segment is both | ||
1718 | * physically and virtually contiguous. | ||
1719 | * | ||
1720 | * @return 0 on success, error code otherwise. | ||
1721 | */ | ||
1722 | /****************************************************************************/ | ||
1723 | |||
1724 | static int dma_map_add_segment(DMA_MemMap_t *memMap, /* Stores state information about the map */ | ||
1725 | DMA_Region_t *region, /* Region that the segment belongs to */ | ||
1726 | void *virtAddr, /* Virtual address of the segment being added */ | ||
1727 | dma_addr_t physAddr, /* Physical address of the segment being added */ | ||
1728 | size_t numBytes /* Number of bytes of the segment being added */ | ||
1729 | ) { | ||
1730 | DMA_Segment_t *segment; | ||
1731 | |||
1732 | DMA_MAP_PRINT("memMap:%p va:%p pa:0x%x #:%d\n", memMap, virtAddr, | ||
1733 | physAddr, numBytes); | ||
1734 | |||
1735 | /* Sanity check */ | ||
1736 | |||
1737 | if (((unsigned long)virtAddr < (unsigned long)region->virtAddr) | ||
1738 | || (((unsigned long)virtAddr + numBytes)) > | ||
1739 | ((unsigned long)region->virtAddr + region->numBytes)) { | ||
1740 | printk(KERN_ERR | ||
1741 | "%s: virtAddr %p is outside region @ %p len: %d\n", | ||
1742 | __func__, virtAddr, region->virtAddr, region->numBytes); | ||
1743 | return -EINVAL; | ||
1744 | } | ||
1745 | |||
1746 | if (region->numSegmentsUsed > 0) { | ||
1747 | /* Check to see if this segment is physically contiguous with the previous one */ | ||
1748 | |||
1749 | segment = ®ion->segment[region->numSegmentsUsed - 1]; | ||
1750 | |||
1751 | if ((segment->physAddr + segment->numBytes) == physAddr) { | ||
1752 | /* It is - just add on to the end */ | ||
1753 | |||
1754 | DMA_MAP_PRINT("appending %d bytes to last segment\n", | ||
1755 | numBytes); | ||
1756 | |||
1757 | segment->numBytes += numBytes; | ||
1758 | |||
1759 | return 0; | ||
1760 | } | ||
1761 | } | ||
1762 | |||
1763 | /* Reallocate to hold more segments, if required. */ | ||
1764 | |||
1765 | if (region->numSegmentsUsed >= region->numSegmentsAllocated) { | ||
1766 | DMA_Segment_t *newSegment; | ||
1767 | size_t oldSize = | ||
1768 | region->numSegmentsAllocated * sizeof(*newSegment); | ||
1769 | int newAlloc = region->numSegmentsAllocated + 4; | ||
1770 | size_t newSize = newAlloc * sizeof(*newSegment); | ||
1771 | |||
1772 | newSegment = kmalloc(newSize, GFP_KERNEL); | ||
1773 | if (newSegment == NULL) { | ||
1774 | return -ENOMEM; | ||
1775 | } | ||
1776 | memcpy(newSegment, region->segment, oldSize); | ||
1777 | memset(&((uint8_t *) newSegment)[oldSize], 0, | ||
1778 | newSize - oldSize); | ||
1779 | kfree(region->segment); | ||
1780 | |||
1781 | region->numSegmentsAllocated = newAlloc; | ||
1782 | region->segment = newSegment; | ||
1783 | } | ||
1784 | |||
1785 | segment = ®ion->segment[region->numSegmentsUsed]; | ||
1786 | region->numSegmentsUsed++; | ||
1787 | |||
1788 | segment->virtAddr = virtAddr; | ||
1789 | segment->physAddr = physAddr; | ||
1790 | segment->numBytes = numBytes; | ||
1791 | |||
1792 | DMA_MAP_PRINT("returning success\n"); | ||
1793 | |||
1794 | return 0; | ||
1795 | } | ||
1796 | |||
1797 | /****************************************************************************/ | ||
1798 | /** | ||
1799 | * Adds a region of memory to a memory map. Each region is virtually | ||
1800 | * contiguous, but not necessarily physically contiguous. | ||
1801 | * | ||
1802 | * @return 0 on success, error code otherwise. | ||
1803 | */ | ||
1804 | /****************************************************************************/ | ||
1805 | |||
1806 | int dma_map_add_region(DMA_MemMap_t *memMap, /* Stores state information about the map */ | ||
1807 | void *mem, /* Virtual address that we want to get a map of */ | ||
1808 | size_t numBytes /* Number of bytes being mapped */ | ||
1809 | ) { | ||
1810 | unsigned long addr = (unsigned long)mem; | ||
1811 | unsigned int offset; | ||
1812 | int rc = 0; | ||
1813 | DMA_Region_t *region; | ||
1814 | dma_addr_t physAddr; | ||
1815 | |||
1816 | down(&memMap->lock); | ||
1817 | |||
1818 | DMA_MAP_PRINT("memMap:%p va:%p #:%d\n", memMap, mem, numBytes); | ||
1819 | |||
1820 | if (!memMap->inUse) { | ||
1821 | printk(KERN_ERR "%s: Make sure you call dma_map_start first\n", | ||
1822 | __func__); | ||
1823 | rc = -EINVAL; | ||
1824 | goto out; | ||
1825 | } | ||
1826 | |||
1827 | /* Reallocate to hold more regions. */ | ||
1828 | |||
1829 | if (memMap->numRegionsUsed >= memMap->numRegionsAllocated) { | ||
1830 | DMA_Region_t *newRegion; | ||
1831 | size_t oldSize = | ||
1832 | memMap->numRegionsAllocated * sizeof(*newRegion); | ||
1833 | int newAlloc = memMap->numRegionsAllocated + 4; | ||
1834 | size_t newSize = newAlloc * sizeof(*newRegion); | ||
1835 | |||
1836 | newRegion = kmalloc(newSize, GFP_KERNEL); | ||
1837 | if (newRegion == NULL) { | ||
1838 | rc = -ENOMEM; | ||
1839 | goto out; | ||
1840 | } | ||
1841 | memcpy(newRegion, memMap->region, oldSize); | ||
1842 | memset(&((uint8_t *) newRegion)[oldSize], 0, newSize - oldSize); | ||
1843 | |||
1844 | kfree(memMap->region); | ||
1845 | |||
1846 | memMap->numRegionsAllocated = newAlloc; | ||
1847 | memMap->region = newRegion; | ||
1848 | } | ||
1849 | |||
1850 | region = &memMap->region[memMap->numRegionsUsed]; | ||
1851 | memMap->numRegionsUsed++; | ||
1852 | |||
1853 | offset = addr & ~PAGE_MASK; | ||
1854 | |||
1855 | region->memType = dma_mem_type(mem); | ||
1856 | region->virtAddr = mem; | ||
1857 | region->numBytes = numBytes; | ||
1858 | region->numSegmentsUsed = 0; | ||
1859 | region->numLockedPages = 0; | ||
1860 | region->lockedPages = NULL; | ||
1861 | |||
1862 | switch (region->memType) { | ||
1863 | case DMA_MEM_TYPE_VMALLOC: | ||
1864 | { | ||
1865 | atomic_inc(&gDmaStatMemTypeVmalloc); | ||
1866 | |||
1867 | /* printk(KERN_ERR "%s: vmalloc'd pages are not supported\n", __func__); */ | ||
1868 | |||
1869 | /* vmalloc'd pages are not physically contiguous */ | ||
1870 | |||
1871 | rc = -EINVAL; | ||
1872 | break; | ||
1873 | } | ||
1874 | |||
1875 | case DMA_MEM_TYPE_KMALLOC: | ||
1876 | { | ||
1877 | atomic_inc(&gDmaStatMemTypeKmalloc); | ||
1878 | |||
1879 | /* kmalloc'd pages are physically contiguous, so they'll have exactly */ | ||
1880 | /* one segment */ | ||
1881 | |||
1882 | #if ALLOW_MAP_OF_KMALLOC_MEMORY | ||
1883 | physAddr = | ||
1884 | dma_map_single(NULL, mem, numBytes, memMap->dir); | ||
1885 | rc = dma_map_add_segment(memMap, region, mem, physAddr, | ||
1886 | numBytes); | ||
1887 | #else | ||
1888 | rc = -EINVAL; | ||
1889 | #endif | ||
1890 | break; | ||
1891 | } | ||
1892 | |||
1893 | case DMA_MEM_TYPE_DMA: | ||
1894 | { | ||
1895 | /* dma_alloc_xxx pages are physically contiguous */ | ||
1896 | |||
1897 | atomic_inc(&gDmaStatMemTypeCoherent); | ||
1898 | |||
1899 | physAddr = (vmalloc_to_pfn(mem) << PAGE_SHIFT) + offset; | ||
1900 | |||
1901 | dma_sync_single_for_cpu(NULL, physAddr, numBytes, | ||
1902 | memMap->dir); | ||
1903 | rc = dma_map_add_segment(memMap, region, mem, physAddr, | ||
1904 | numBytes); | ||
1905 | break; | ||
1906 | } | ||
1907 | |||
1908 | case DMA_MEM_TYPE_USER: | ||
1909 | { | ||
1910 | size_t firstPageOffset; | ||
1911 | size_t firstPageSize; | ||
1912 | struct page **pages; | ||
1913 | struct task_struct *userTask; | ||
1914 | |||
1915 | atomic_inc(&gDmaStatMemTypeUser); | ||
1916 | |||
1917 | #if 1 | ||
1918 | /* If the pages are user pages, then the dma_mem_map_set_user_task function */ | ||
1919 | /* must have been previously called. */ | ||
1920 | |||
1921 | if (memMap->userTask == NULL) { | ||
1922 | printk(KERN_ERR | ||
1923 | "%s: must call dma_mem_map_set_user_task when using user-mode memory\n", | ||
1924 | __func__); | ||
1925 | return -EINVAL; | ||
1926 | } | ||
1927 | |||
1928 | /* User pages need to be locked. */ | ||
1929 | |||
1930 | firstPageOffset = | ||
1931 | (unsigned long)region->virtAddr & (PAGE_SIZE - 1); | ||
1932 | firstPageSize = PAGE_SIZE - firstPageOffset; | ||
1933 | |||
1934 | region->numLockedPages = (firstPageOffset | ||
1935 | + region->numBytes + | ||
1936 | PAGE_SIZE - 1) / PAGE_SIZE; | ||
1937 | pages = | ||
1938 | kmalloc(region->numLockedPages * | ||
1939 | sizeof(struct page *), GFP_KERNEL); | ||
1940 | |||
1941 | if (pages == NULL) { | ||
1942 | region->numLockedPages = 0; | ||
1943 | return -ENOMEM; | ||
1944 | } | ||
1945 | |||
1946 | userTask = memMap->userTask; | ||
1947 | |||
1948 | down_read(&userTask->mm->mmap_sem); | ||
1949 | rc = get_user_pages(userTask, /* task */ | ||
1950 | userTask->mm, /* mm */ | ||
1951 | (unsigned long)region->virtAddr, /* start */ | ||
1952 | region->numLockedPages, /* len */ | ||
1953 | memMap->dir == DMA_FROM_DEVICE, /* write */ | ||
1954 | 0, /* force */ | ||
1955 | pages, /* pages (array of pointers to page) */ | ||
1956 | NULL); /* vmas */ | ||
1957 | up_read(&userTask->mm->mmap_sem); | ||
1958 | |||
1959 | if (rc != region->numLockedPages) { | ||
1960 | kfree(pages); | ||
1961 | region->numLockedPages = 0; | ||
1962 | |||
1963 | if (rc >= 0) { | ||
1964 | rc = -EINVAL; | ||
1965 | } | ||
1966 | } else { | ||
1967 | uint8_t *virtAddr = region->virtAddr; | ||
1968 | size_t bytesRemaining; | ||
1969 | int pageIdx; | ||
1970 | |||
1971 | rc = 0; /* Since get_user_pages returns +ve number */ | ||
1972 | |||
1973 | region->lockedPages = pages; | ||
1974 | |||
1975 | /* We've locked the user pages. Now we need to walk them and figure */ | ||
1976 | /* out the physical addresses. */ | ||
1977 | |||
1978 | /* The first page may be partial */ | ||
1979 | |||
1980 | dma_map_add_segment(memMap, | ||
1981 | region, | ||
1982 | virtAddr, | ||
1983 | PFN_PHYS(page_to_pfn | ||
1984 | (pages[0])) + | ||
1985 | firstPageOffset, | ||
1986 | firstPageSize); | ||
1987 | |||
1988 | virtAddr += firstPageSize; | ||
1989 | bytesRemaining = | ||
1990 | region->numBytes - firstPageSize; | ||
1991 | |||
1992 | for (pageIdx = 1; | ||
1993 | pageIdx < region->numLockedPages; | ||
1994 | pageIdx++) { | ||
1995 | size_t bytesThisPage = | ||
1996 | (bytesRemaining > | ||
1997 | PAGE_SIZE ? PAGE_SIZE : | ||
1998 | bytesRemaining); | ||
1999 | |||
2000 | DMA_MAP_PRINT | ||
2001 | ("pageIdx:%d pages[pageIdx]=%p pfn=%u phys=%u\n", | ||
2002 | pageIdx, pages[pageIdx], | ||
2003 | page_to_pfn(pages[pageIdx]), | ||
2004 | PFN_PHYS(page_to_pfn | ||
2005 | (pages[pageIdx]))); | ||
2006 | |||
2007 | dma_map_add_segment(memMap, | ||
2008 | region, | ||
2009 | virtAddr, | ||
2010 | PFN_PHYS(page_to_pfn | ||
2011 | (pages | ||
2012 | [pageIdx])), | ||
2013 | bytesThisPage); | ||
2014 | |||
2015 | virtAddr += bytesThisPage; | ||
2016 | bytesRemaining -= bytesThisPage; | ||
2017 | } | ||
2018 | } | ||
2019 | #else | ||
2020 | printk(KERN_ERR | ||
2021 | "%s: User mode pages are not yet supported\n", | ||
2022 | __func__); | ||
2023 | |||
2024 | /* user pages are not physically contiguous */ | ||
2025 | |||
2026 | rc = -EINVAL; | ||
2027 | #endif | ||
2028 | break; | ||
2029 | } | ||
2030 | |||
2031 | default: | ||
2032 | { | ||
2033 | printk(KERN_ERR "%s: Unsupported memory type: %d\n", | ||
2034 | __func__, region->memType); | ||
2035 | |||
2036 | rc = -EINVAL; | ||
2037 | break; | ||
2038 | } | ||
2039 | } | ||
2040 | |||
2041 | if (rc != 0) { | ||
2042 | memMap->numRegionsUsed--; | ||
2043 | } | ||
2044 | |||
2045 | out: | ||
2046 | |||
2047 | DMA_MAP_PRINT("returning %d\n", rc); | ||
2048 | |||
2049 | up(&memMap->lock); | ||
2050 | |||
2051 | return rc; | ||
2052 | } | ||
2053 | |||
2054 | EXPORT_SYMBOL(dma_map_add_segment); | ||
2055 | |||
2056 | /****************************************************************************/ | ||
2057 | /** | ||
2058 | * Maps in a memory region such that it can be used for performing a DMA. | ||
2059 | * | ||
2060 | * @return 0 on success, error code otherwise. | ||
2061 | */ | ||
2062 | /****************************************************************************/ | ||
2063 | |||
2064 | int dma_map_mem(DMA_MemMap_t *memMap, /* Stores state information about the map */ | ||
2065 | void *mem, /* Virtual address that we want to get a map of */ | ||
2066 | size_t numBytes, /* Number of bytes being mapped */ | ||
2067 | enum dma_data_direction dir /* Direction that the mapping will be going */ | ||
2068 | ) { | ||
2069 | int rc; | ||
2070 | |||
2071 | rc = dma_map_start(memMap, dir); | ||
2072 | if (rc == 0) { | ||
2073 | rc = dma_map_add_region(memMap, mem, numBytes); | ||
2074 | if (rc < 0) { | ||
2075 | /* Since the add fails, this function will fail, and the caller won't */ | ||
2076 | /* call unmap, so we need to do it here. */ | ||
2077 | |||
2078 | dma_unmap(memMap, 0); | ||
2079 | } | ||
2080 | } | ||
2081 | |||
2082 | return rc; | ||
2083 | } | ||
2084 | |||
2085 | EXPORT_SYMBOL(dma_map_mem); | ||
2086 | |||
2087 | /****************************************************************************/ | ||
2088 | /** | ||
2089 | * Setup a descriptor ring for a given memory map. | ||
2090 | * | ||
2091 | * It is assumed that the descriptor ring has already been initialized, and | ||
2092 | * this routine will only reallocate a new descriptor ring if the existing | ||
2093 | * one is too small. | ||
2094 | * | ||
2095 | * @return 0 on success, error code otherwise. | ||
2096 | */ | ||
2097 | /****************************************************************************/ | ||
2098 | |||
2099 | int dma_map_create_descriptor_ring(DMA_Device_t dev, /* DMA device (where the ring is stored) */ | ||
2100 | DMA_MemMap_t *memMap, /* Memory map that will be used */ | ||
2101 | dma_addr_t devPhysAddr /* Physical address of device */ | ||
2102 | ) { | ||
2103 | int rc; | ||
2104 | int numDescriptors; | ||
2105 | DMA_DeviceAttribute_t *devAttr; | ||
2106 | DMA_Region_t *region; | ||
2107 | DMA_Segment_t *segment; | ||
2108 | dma_addr_t srcPhysAddr; | ||
2109 | dma_addr_t dstPhysAddr; | ||
2110 | int regionIdx; | ||
2111 | int segmentIdx; | ||
2112 | |||
2113 | devAttr = &DMA_gDeviceAttribute[dev]; | ||
2114 | |||
2115 | down(&memMap->lock); | ||
2116 | |||
2117 | /* Figure out how many descriptors we need */ | ||
2118 | |||
2119 | numDescriptors = 0; | ||
2120 | for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) { | ||
2121 | region = &memMap->region[regionIdx]; | ||
2122 | |||
2123 | for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed; | ||
2124 | segmentIdx++) { | ||
2125 | segment = ®ion->segment[segmentIdx]; | ||
2126 | |||
2127 | if (memMap->dir == DMA_TO_DEVICE) { | ||
2128 | srcPhysAddr = segment->physAddr; | ||
2129 | dstPhysAddr = devPhysAddr; | ||
2130 | } else { | ||
2131 | srcPhysAddr = devPhysAddr; | ||
2132 | dstPhysAddr = segment->physAddr; | ||
2133 | } | ||
2134 | |||
2135 | rc = | ||
2136 | dma_calculate_descriptor_count(dev, srcPhysAddr, | ||
2137 | dstPhysAddr, | ||
2138 | segment-> | ||
2139 | numBytes); | ||
2140 | if (rc < 0) { | ||
2141 | printk(KERN_ERR | ||
2142 | "%s: dma_calculate_descriptor_count failed: %d\n", | ||
2143 | __func__, rc); | ||
2144 | goto out; | ||
2145 | } | ||
2146 | numDescriptors += rc; | ||
2147 | } | ||
2148 | } | ||
2149 | |||
2150 | /* Adjust the size of the ring, if it isn't big enough */ | ||
2151 | |||
2152 | if (numDescriptors > devAttr->ring.descriptorsAllocated) { | ||
2153 | dma_free_descriptor_ring(&devAttr->ring); | ||
2154 | rc = | ||
2155 | dma_alloc_descriptor_ring(&devAttr->ring, | ||
2156 | numDescriptors); | ||
2157 | if (rc < 0) { | ||
2158 | printk(KERN_ERR | ||
2159 | "%s: dma_alloc_descriptor_ring failed: %d\n", | ||
2160 | __func__, rc); | ||
2161 | goto out; | ||
2162 | } | ||
2163 | } else { | ||
2164 | rc = | ||
2165 | dma_init_descriptor_ring(&devAttr->ring, | ||
2166 | numDescriptors); | ||
2167 | if (rc < 0) { | ||
2168 | printk(KERN_ERR | ||
2169 | "%s: dma_init_descriptor_ring failed: %d\n", | ||
2170 | __func__, rc); | ||
2171 | goto out; | ||
2172 | } | ||
2173 | } | ||
2174 | |||
2175 | /* Populate the descriptors */ | ||
2176 | |||
2177 | for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) { | ||
2178 | region = &memMap->region[regionIdx]; | ||
2179 | |||
2180 | for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed; | ||
2181 | segmentIdx++) { | ||
2182 | segment = ®ion->segment[segmentIdx]; | ||
2183 | |||
2184 | if (memMap->dir == DMA_TO_DEVICE) { | ||
2185 | srcPhysAddr = segment->physAddr; | ||
2186 | dstPhysAddr = devPhysAddr; | ||
2187 | } else { | ||
2188 | srcPhysAddr = devPhysAddr; | ||
2189 | dstPhysAddr = segment->physAddr; | ||
2190 | } | ||
2191 | |||
2192 | rc = | ||
2193 | dma_add_descriptors(&devAttr->ring, dev, | ||
2194 | srcPhysAddr, dstPhysAddr, | ||
2195 | segment->numBytes); | ||
2196 | if (rc < 0) { | ||
2197 | printk(KERN_ERR | ||
2198 | "%s: dma_add_descriptors failed: %d\n", | ||
2199 | __func__, rc); | ||
2200 | goto out; | ||
2201 | } | ||
2202 | } | ||
2203 | } | ||
2204 | |||
2205 | rc = 0; | ||
2206 | |||
2207 | out: | ||
2208 | |||
2209 | up(&memMap->lock); | ||
2210 | return rc; | ||
2211 | } | ||
2212 | |||
2213 | EXPORT_SYMBOL(dma_map_create_descriptor_ring); | ||
2214 | |||
2215 | /****************************************************************************/ | ||
2216 | /** | ||
2217 | * Maps in a memory region such that it can be used for performing a DMA. | ||
2218 | * | ||
2219 | * @return | ||
2220 | */ | ||
2221 | /****************************************************************************/ | ||
2222 | |||
2223 | int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */ | ||
2224 | int dirtied /* non-zero if any of the pages were modified */ | ||
2225 | ) { | ||
2226 | |||
2227 | int rc = 0; | ||
2228 | int regionIdx; | ||
2229 | int segmentIdx; | ||
2230 | DMA_Region_t *region; | ||
2231 | DMA_Segment_t *segment; | ||
2232 | |||
2233 | down(&memMap->lock); | ||
2234 | |||
2235 | for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) { | ||
2236 | region = &memMap->region[regionIdx]; | ||
2237 | |||
2238 | for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed; | ||
2239 | segmentIdx++) { | ||
2240 | segment = ®ion->segment[segmentIdx]; | ||
2241 | |||
2242 | switch (region->memType) { | ||
2243 | case DMA_MEM_TYPE_VMALLOC: | ||
2244 | { | ||
2245 | printk(KERN_ERR | ||
2246 | "%s: vmalloc'd pages are not yet supported\n", | ||
2247 | __func__); | ||
2248 | rc = -EINVAL; | ||
2249 | goto out; | ||
2250 | } | ||
2251 | |||
2252 | case DMA_MEM_TYPE_KMALLOC: | ||
2253 | { | ||
2254 | #if ALLOW_MAP_OF_KMALLOC_MEMORY | ||
2255 | dma_unmap_single(NULL, | ||
2256 | segment->physAddr, | ||
2257 | segment->numBytes, | ||
2258 | memMap->dir); | ||
2259 | #endif | ||
2260 | break; | ||
2261 | } | ||
2262 | |||
2263 | case DMA_MEM_TYPE_DMA: | ||
2264 | { | ||
2265 | dma_sync_single_for_cpu(NULL, | ||
2266 | segment-> | ||
2267 | physAddr, | ||
2268 | segment-> | ||
2269 | numBytes, | ||
2270 | memMap->dir); | ||
2271 | break; | ||
2272 | } | ||
2273 | |||
2274 | case DMA_MEM_TYPE_USER: | ||
2275 | { | ||
2276 | /* Nothing to do here. */ | ||
2277 | |||
2278 | break; | ||
2279 | } | ||
2280 | |||
2281 | default: | ||
2282 | { | ||
2283 | printk(KERN_ERR | ||
2284 | "%s: Unsupported memory type: %d\n", | ||
2285 | __func__, region->memType); | ||
2286 | rc = -EINVAL; | ||
2287 | goto out; | ||
2288 | } | ||
2289 | } | ||
2290 | |||
2291 | segment->virtAddr = NULL; | ||
2292 | segment->physAddr = 0; | ||
2293 | segment->numBytes = 0; | ||
2294 | } | ||
2295 | |||
2296 | if (region->numLockedPages > 0) { | ||
2297 | int pageIdx; | ||
2298 | |||
2299 | /* Some user pages were locked. We need to go and unlock them now. */ | ||
2300 | |||
2301 | for (pageIdx = 0; pageIdx < region->numLockedPages; | ||
2302 | pageIdx++) { | ||
2303 | struct page *page = | ||
2304 | region->lockedPages[pageIdx]; | ||
2305 | |||
2306 | if (memMap->dir == DMA_FROM_DEVICE) { | ||
2307 | SetPageDirty(page); | ||
2308 | } | ||
2309 | page_cache_release(page); | ||
2310 | } | ||
2311 | kfree(region->lockedPages); | ||
2312 | region->numLockedPages = 0; | ||
2313 | region->lockedPages = NULL; | ||
2314 | } | ||
2315 | |||
2316 | region->memType = DMA_MEM_TYPE_NONE; | ||
2317 | region->virtAddr = NULL; | ||
2318 | region->numBytes = 0; | ||
2319 | region->numSegmentsUsed = 0; | ||
2320 | } | ||
2321 | memMap->userTask = NULL; | ||
2322 | memMap->numRegionsUsed = 0; | ||
2323 | memMap->inUse = 0; | ||
2324 | |||
2325 | out: | ||
2326 | up(&memMap->lock); | ||
2327 | |||
2328 | return rc; | ||
2329 | } | ||
2330 | |||
2331 | EXPORT_SYMBOL(dma_unmap); | ||
diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h index 1f2c5319c056..72543781207b 100644 --- a/arch/arm/mach-bcmring/include/mach/dma.h +++ b/arch/arm/mach-bcmring/include/mach/dma.h | |||
@@ -26,15 +26,9 @@ | |||
26 | /* ---- Include Files ---------------------------------------------------- */ | 26 | /* ---- Include Files ---------------------------------------------------- */ |
27 | 27 | ||
28 | #include <linux/kernel.h> | 28 | #include <linux/kernel.h> |
29 | #include <linux/wait.h> | ||
30 | #include <linux/semaphore.h> | 29 | #include <linux/semaphore.h> |
31 | #include <csp/dmacHw.h> | 30 | #include <csp/dmacHw.h> |
32 | #include <mach/timer.h> | 31 | #include <mach/timer.h> |
33 | #include <linux/scatterlist.h> | ||
34 | #include <linux/dma-mapping.h> | ||
35 | #include <linux/mm.h> | ||
36 | #include <linux/vmalloc.h> | ||
37 | #include <linux/pagemap.h> | ||
38 | 32 | ||
39 | /* ---- Constants and Types ---------------------------------------------- */ | 33 | /* ---- Constants and Types ---------------------------------------------- */ |
40 | 34 | ||
@@ -113,78 +107,6 @@ typedef struct { | |||
113 | 107 | ||
114 | /**************************************************************************** | 108 | /**************************************************************************** |
115 | * | 109 | * |
116 | * The DMA_MemType_t and DMA_MemMap_t are helper structures used to setup | ||
117 | * DMA chains from a variety of memory sources. | ||
118 | * | ||
119 | *****************************************************************************/ | ||
120 | |||
121 | #define DMA_MEM_MAP_MIN_SIZE 4096 /* Pages less than this size are better */ | ||
122 | /* off not being DMA'd. */ | ||
123 | |||
124 | typedef enum { | ||
125 | DMA_MEM_TYPE_NONE, /* Not a valid setting */ | ||
126 | DMA_MEM_TYPE_VMALLOC, /* Memory came from vmalloc call */ | ||
127 | DMA_MEM_TYPE_KMALLOC, /* Memory came from kmalloc call */ | ||
128 | DMA_MEM_TYPE_DMA, /* Memory came from dma_alloc_xxx call */ | ||
129 | DMA_MEM_TYPE_USER, /* Memory came from user space. */ | ||
130 | |||
131 | } DMA_MemType_t; | ||
132 | |||
133 | /* A segment represents a physically and virtually contiguous chunk of memory. */ | ||
134 | /* i.e. each segment can be DMA'd */ | ||
135 | /* A user of the DMA code will add memory regions. Each region may need to be */ | ||
136 | /* represented by one or more segments. */ | ||
137 | |||
138 | typedef struct { | ||
139 | void *virtAddr; /* Virtual address used for this segment */ | ||
140 | dma_addr_t physAddr; /* Physical address this segment maps to */ | ||
141 | size_t numBytes; /* Size of the segment, in bytes */ | ||
142 | |||
143 | } DMA_Segment_t; | ||
144 | |||
145 | /* A region represents a virtually contiguous chunk of memory, which may be */ | ||
146 | /* made up of multiple segments. */ | ||
147 | |||
148 | typedef struct { | ||
149 | DMA_MemType_t memType; | ||
150 | void *virtAddr; | ||
151 | size_t numBytes; | ||
152 | |||
153 | /* Each region (virtually contiguous) consists of one or more segments. Each */ | ||
154 | /* segment is virtually and physically contiguous. */ | ||
155 | |||
156 | int numSegmentsUsed; | ||
157 | int numSegmentsAllocated; | ||
158 | DMA_Segment_t *segment; | ||
159 | |||
160 | /* When a region corresponds to user memory, we need to lock all of the pages */ | ||
161 | /* down before we can figure out the physical addresses. The lockedPage array contains */ | ||
162 | /* the pages that were locked, and which subsequently need to be unlocked once the */ | ||
163 | /* memory is unmapped. */ | ||
164 | |||
165 | unsigned numLockedPages; | ||
166 | struct page **lockedPages; | ||
167 | |||
168 | } DMA_Region_t; | ||
169 | |||
170 | typedef struct { | ||
171 | int inUse; /* Is this mapping currently being used? */ | ||
172 | struct semaphore lock; /* Acquired when using this structure */ | ||
173 | enum dma_data_direction dir; /* Direction this transfer is intended for */ | ||
174 | |||
175 | /* In the event that we're mapping user memory, we need to know which task */ | ||
176 | /* the memory is for, so that we can obtain the correct mm locks. */ | ||
177 | |||
178 | struct task_struct *userTask; | ||
179 | |||
180 | int numRegionsUsed; | ||
181 | int numRegionsAllocated; | ||
182 | DMA_Region_t *region; | ||
183 | |||
184 | } DMA_MemMap_t; | ||
185 | |||
186 | /**************************************************************************** | ||
187 | * | ||
188 | * The DMA_DeviceAttribute_t contains information which describes a | 110 | * The DMA_DeviceAttribute_t contains information which describes a |
189 | * particular DMA device (or peripheral). | 111 | * particular DMA device (or peripheral). |
190 | * | 112 | * |
@@ -570,124 +492,6 @@ int dma_alloc_double_dst_descriptors(DMA_Handle_t handle, /* DMA Handle */ | |||
570 | 492 | ||
571 | /****************************************************************************/ | 493 | /****************************************************************************/ |
572 | /** | 494 | /** |
573 | * Initializes a DMA_MemMap_t data structure | ||
574 | */ | ||
575 | /****************************************************************************/ | ||
576 | |||
577 | int dma_init_mem_map(DMA_MemMap_t *memMap /* Stores state information about the map */ | ||
578 | ); | ||
579 | |||
580 | /****************************************************************************/ | ||
581 | /** | ||
582 | * Releases any memory currently being held by a memory mapping structure. | ||
583 | */ | ||
584 | /****************************************************************************/ | ||
585 | |||
586 | int dma_term_mem_map(DMA_MemMap_t *memMap /* Stores state information about the map */ | ||
587 | ); | ||
588 | |||
589 | /****************************************************************************/ | ||
590 | /** | ||
591 | * Looks at a memory address and categorizes it. | ||
592 | * | ||
593 | * @return One of the values from the DMA_MemType_t enumeration. | ||
594 | */ | ||
595 | /****************************************************************************/ | ||
596 | |||
597 | DMA_MemType_t dma_mem_type(void *addr); | ||
598 | |||
599 | /****************************************************************************/ | ||
600 | /** | ||
601 | * Sets the process (aka userTask) associated with a mem map. This is | ||
602 | * required if user-mode segments will be added to the mapping. | ||
603 | */ | ||
604 | /****************************************************************************/ | ||
605 | |||
606 | static inline void dma_mem_map_set_user_task(DMA_MemMap_t *memMap, | ||
607 | struct task_struct *task) | ||
608 | { | ||
609 | memMap->userTask = task; | ||
610 | } | ||
611 | |||
612 | /****************************************************************************/ | ||
613 | /** | ||
614 | * Looks at a memory address and determines if we support DMA'ing to/from | ||
615 | * that type of memory. | ||
616 | * | ||
617 | * @return boolean - | ||
618 | * return value != 0 means dma supported | ||
619 | * return value == 0 means dma not supported | ||
620 | */ | ||
621 | /****************************************************************************/ | ||
622 | |||
623 | int dma_mem_supports_dma(void *addr); | ||
624 | |||
625 | /****************************************************************************/ | ||
626 | /** | ||
627 | * Initializes a memory map for use. Since this function acquires a | ||
628 | * sempaphore within the memory map, it is VERY important that dma_unmap | ||
629 | * be called when you're finished using the map. | ||
630 | */ | ||
631 | /****************************************************************************/ | ||
632 | |||
633 | int dma_map_start(DMA_MemMap_t *memMap, /* Stores state information about the map */ | ||
634 | enum dma_data_direction dir /* Direction that the mapping will be going */ | ||
635 | ); | ||
636 | |||
637 | /****************************************************************************/ | ||
638 | /** | ||
639 | * Adds a segment of memory to a memory map. | ||
640 | * | ||
641 | * @return 0 on success, error code otherwise. | ||
642 | */ | ||
643 | /****************************************************************************/ | ||
644 | |||
645 | int dma_map_add_region(DMA_MemMap_t *memMap, /* Stores state information about the map */ | ||
646 | void *mem, /* Virtual address that we want to get a map of */ | ||
647 | size_t numBytes /* Number of bytes being mapped */ | ||
648 | ); | ||
649 | |||
650 | /****************************************************************************/ | ||
651 | /** | ||
652 | * Creates a descriptor ring from a memory mapping. | ||
653 | * | ||
654 | * @return 0 on success, error code otherwise. | ||
655 | */ | ||
656 | /****************************************************************************/ | ||
657 | |||
658 | int dma_map_create_descriptor_ring(DMA_Device_t dev, /* DMA device (where the ring is stored) */ | ||
659 | DMA_MemMap_t *memMap, /* Memory map that will be used */ | ||
660 | dma_addr_t devPhysAddr /* Physical address of device */ | ||
661 | ); | ||
662 | |||
663 | /****************************************************************************/ | ||
664 | /** | ||
665 | * Maps in a memory region such that it can be used for performing a DMA. | ||
666 | * | ||
667 | * @return | ||
668 | */ | ||
669 | /****************************************************************************/ | ||
670 | |||
671 | int dma_map_mem(DMA_MemMap_t *memMap, /* Stores state information about the map */ | ||
672 | void *addr, /* Virtual address that we want to get a map of */ | ||
673 | size_t count, /* Number of bytes being mapped */ | ||
674 | enum dma_data_direction dir /* Direction that the mapping will be going */ | ||
675 | ); | ||
676 | |||
677 | /****************************************************************************/ | ||
678 | /** | ||
679 | * Maps in a memory region such that it can be used for performing a DMA. | ||
680 | * | ||
681 | * @return | ||
682 | */ | ||
683 | /****************************************************************************/ | ||
684 | |||
685 | int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */ | ||
686 | int dirtied /* non-zero if any of the pages were modified */ | ||
687 | ); | ||
688 | |||
689 | /****************************************************************************/ | ||
690 | /** | ||
691 | * Initiates a transfer when the descriptors have already been setup. | 495 | * Initiates a transfer when the descriptors have already been setup. |
692 | * | 496 | * |
693 | * This is a special case, and normally, the dma_transfer_xxx functions should | 497 | * This is a special case, and normally, the dma_transfer_xxx functions should |
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 6b22b543a83f..d5088900af6c 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c | |||
@@ -44,7 +44,7 @@ | |||
44 | #include <mach/aemif.h> | 44 | #include <mach/aemif.h> |
45 | #include <mach/spi.h> | 45 | #include <mach/spi.h> |
46 | 46 | ||
47 | #define DA850_EVM_PHY_ID "0:00" | 47 | #define DA850_EVM_PHY_ID "davinci_mdio-0:00" |
48 | #define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8) | 48 | #define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8) |
49 | #define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15) | 49 | #define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15) |
50 | 50 | ||
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 346e1de2f5a8..849311d3cb7c 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c | |||
@@ -54,7 +54,7 @@ static inline int have_tvp7002(void) | |||
54 | return 0; | 54 | return 0; |
55 | } | 55 | } |
56 | 56 | ||
57 | #define DM365_EVM_PHY_ID "0:01" | 57 | #define DM365_EVM_PHY_ID "davinci_mdio-0:01" |
58 | /* | 58 | /* |
59 | * A MAX-II CPLD is used for various board control functions. | 59 | * A MAX-II CPLD is used for various board control functions. |
60 | */ | 60 | */ |
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index a64b49cfedca..1247ecdcf752 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c | |||
@@ -40,7 +40,7 @@ | |||
40 | #include <mach/usb.h> | 40 | #include <mach/usb.h> |
41 | #include <mach/aemif.h> | 41 | #include <mach/aemif.h> |
42 | 42 | ||
43 | #define DM644X_EVM_PHY_ID "0:01" | 43 | #define DM644X_EVM_PHY_ID "davinci_mdio-0:01" |
44 | #define LXT971_PHY_ID (0x001378e2) | 44 | #define LXT971_PHY_ID (0x001378e2) |
45 | #define LXT971_PHY_MASK (0xfffffff0) | 45 | #define LXT971_PHY_MASK (0xfffffff0) |
46 | 46 | ||
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 64017558860b..872ac69fa049 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c | |||
@@ -736,7 +736,7 @@ static struct davinci_uart_config uart_config __initdata = { | |||
736 | .enabled_uarts = (1 << 0), | 736 | .enabled_uarts = (1 << 0), |
737 | }; | 737 | }; |
738 | 738 | ||
739 | #define DM646X_EVM_PHY_ID "0:01" | 739 | #define DM646X_EVM_PHY_ID "davinci_mdio-0:01" |
740 | /* | 740 | /* |
741 | * The following EDMA channels/slots are not being used by drivers (for | 741 | * The following EDMA channels/slots are not being used by drivers (for |
742 | * example: Timer, GPIO, UART events etc) on dm646x, hence they are being | 742 | * example: Timer, GPIO, UART events etc) on dm646x, hence they are being |
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 6c4a16415d47..8d34f513d415 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c | |||
@@ -39,7 +39,7 @@ | |||
39 | #include <mach/mmc.h> | 39 | #include <mach/mmc.h> |
40 | #include <mach/usb.h> | 40 | #include <mach/usb.h> |
41 | 41 | ||
42 | #define NEUROS_OSD2_PHY_ID "0:01" | 42 | #define NEUROS_OSD2_PHY_ID "davinci_mdio-0:01" |
43 | #define LXT971_PHY_ID 0x001378e2 | 43 | #define LXT971_PHY_ID 0x001378e2 |
44 | #define LXT971_PHY_MASK 0xfffffff0 | 44 | #define LXT971_PHY_MASK 0xfffffff0 |
45 | 45 | ||
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index e7c0c7c53493..45e815760a27 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c | |||
@@ -21,7 +21,7 @@ | |||
21 | #include <mach/da8xx.h> | 21 | #include <mach/da8xx.h> |
22 | #include <mach/mux.h> | 22 | #include <mach/mux.h> |
23 | 23 | ||
24 | #define HAWKBOARD_PHY_ID "0:07" | 24 | #define HAWKBOARD_PHY_ID "davinci_mdio-0:07" |
25 | #define DA850_HAWK_MMCSD_CD_PIN GPIO_TO_PIN(3, 12) | 25 | #define DA850_HAWK_MMCSD_CD_PIN GPIO_TO_PIN(3, 12) |
26 | #define DA850_HAWK_MMCSD_WP_PIN GPIO_TO_PIN(3, 13) | 26 | #define DA850_HAWK_MMCSD_WP_PIN GPIO_TO_PIN(3, 13) |
27 | 27 | ||
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 0b136a831c59..31da3c5b2ba3 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c | |||
@@ -42,7 +42,7 @@ | |||
42 | #include <mach/mux.h> | 42 | #include <mach/mux.h> |
43 | #include <mach/usb.h> | 43 | #include <mach/usb.h> |
44 | 44 | ||
45 | #define SFFSDR_PHY_ID "0:01" | 45 | #define SFFSDR_PHY_ID "davinci_mdio-0:01" |
46 | static struct mtd_partition davinci_sffsdr_nandflash_partition[] = { | 46 | static struct mtd_partition davinci_sffsdr_nandflash_partition[] = { |
47 | /* U-Boot Environment: Block 0 | 47 | /* U-Boot Environment: Block 0 |
48 | * UBL: Block 1 | 48 | * UBL: Block 1 |
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 0ed7fdb64efb..992c4c410185 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c | |||
@@ -153,34 +153,6 @@ static struct clk pll1_sysclk3 = { | |||
153 | .div_reg = PLLDIV3, | 153 | .div_reg = PLLDIV3, |
154 | }; | 154 | }; |
155 | 155 | ||
156 | static struct clk pll1_sysclk4 = { | ||
157 | .name = "pll1_sysclk4", | ||
158 | .parent = &pll1_clk, | ||
159 | .flags = CLK_PLL, | ||
160 | .div_reg = PLLDIV4, | ||
161 | }; | ||
162 | |||
163 | static struct clk pll1_sysclk5 = { | ||
164 | .name = "pll1_sysclk5", | ||
165 | .parent = &pll1_clk, | ||
166 | .flags = CLK_PLL, | ||
167 | .div_reg = PLLDIV5, | ||
168 | }; | ||
169 | |||
170 | static struct clk pll1_sysclk6 = { | ||
171 | .name = "pll0_sysclk6", | ||
172 | .parent = &pll0_clk, | ||
173 | .flags = CLK_PLL, | ||
174 | .div_reg = PLLDIV6, | ||
175 | }; | ||
176 | |||
177 | static struct clk pll1_sysclk7 = { | ||
178 | .name = "pll1_sysclk7", | ||
179 | .parent = &pll1_clk, | ||
180 | .flags = CLK_PLL, | ||
181 | .div_reg = PLLDIV7, | ||
182 | }; | ||
183 | |||
184 | static struct clk i2c0_clk = { | 156 | static struct clk i2c0_clk = { |
185 | .name = "i2c0", | 157 | .name = "i2c0", |
186 | .parent = &pll0_aux_clk, | 158 | .parent = &pll0_aux_clk, |
@@ -397,10 +369,6 @@ static struct clk_lookup da850_clks[] = { | |||
397 | CLK(NULL, "pll1_aux", &pll1_aux_clk), | 369 | CLK(NULL, "pll1_aux", &pll1_aux_clk), |
398 | CLK(NULL, "pll1_sysclk2", &pll1_sysclk2), | 370 | CLK(NULL, "pll1_sysclk2", &pll1_sysclk2), |
399 | CLK(NULL, "pll1_sysclk3", &pll1_sysclk3), | 371 | CLK(NULL, "pll1_sysclk3", &pll1_sysclk3), |
400 | CLK(NULL, "pll1_sysclk4", &pll1_sysclk4), | ||
401 | CLK(NULL, "pll1_sysclk5", &pll1_sysclk5), | ||
402 | CLK(NULL, "pll1_sysclk6", &pll1_sysclk6), | ||
403 | CLK(NULL, "pll1_sysclk7", &pll1_sysclk7), | ||
404 | CLK("i2c_davinci.1", NULL, &i2c0_clk), | 372 | CLK("i2c_davinci.1", NULL, &i2c0_clk), |
405 | CLK(NULL, "timer0", &timerp64_0_clk), | 373 | CLK(NULL, "timer0", &timerp64_0_clk), |
406 | CLK("watchdog", NULL, &timerp64_1_clk), | 374 | CLK("watchdog", NULL, &timerp64_1_clk), |
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index dd1429ae6405..bda7aca04ca0 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c | |||
@@ -28,6 +28,7 @@ | |||
28 | #include <asm/mach/arch.h> | 28 | #include <asm/mach/arch.h> |
29 | #include <linux/irq.h> | 29 | #include <linux/irq.h> |
30 | #include <plat/time.h> | 30 | #include <plat/time.h> |
31 | #include <plat/ehci-orion.h> | ||
31 | #include <plat/common.h> | 32 | #include <plat/common.h> |
32 | #include <plat/addr-map.h> | 33 | #include <plat/addr-map.h> |
33 | #include "common.h" | 34 | #include "common.h" |
@@ -71,7 +72,7 @@ void __init dove_map_io(void) | |||
71 | ****************************************************************************/ | 72 | ****************************************************************************/ |
72 | void __init dove_ehci0_init(void) | 73 | void __init dove_ehci0_init(void) |
73 | { | 74 | { |
74 | orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0); | 75 | orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0, EHCI_PHY_NA); |
75 | } | 76 | } |
76 | 77 | ||
77 | /***************************************************************************** | 78 | /***************************************************************************** |
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c index 03dd4012043e..d5fb44f16d31 100644 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/arch/arm/mach-ep93xx/vision_ep9307.c | |||
@@ -32,6 +32,7 @@ | |||
32 | #include <mach/hardware.h> | 32 | #include <mach/hardware.h> |
33 | #include <mach/fb.h> | 33 | #include <mach/fb.h> |
34 | #include <mach/ep93xx_spi.h> | 34 | #include <mach/ep93xx_spi.h> |
35 | #include <mach/gpio-ep93xx.h> | ||
35 | 36 | ||
36 | #include <asm/mach-types.h> | 37 | #include <asm/mach-types.h> |
37 | #include <asm/mach/map.h> | 38 | #include <asm/mach/map.h> |
@@ -153,7 +154,6 @@ static struct i2c_board_info vision_i2c_info[] __initdata = { | |||
153 | }, { | 154 | }, { |
154 | I2C_BOARD_INFO("pca9539", 0x74), | 155 | I2C_BOARD_INFO("pca9539", 0x74), |
155 | .platform_data = &pca953x_74_gpio_data, | 156 | .platform_data = &pca953x_74_gpio_data, |
156 | .irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)), | ||
157 | }, { | 157 | }, { |
158 | I2C_BOARD_INFO("pca9539", 0x75), | 158 | I2C_BOARD_INFO("pca9539", 0x75), |
159 | .platform_data = &pca953x_75_gpio_data, | 159 | .platform_data = &pca953x_75_gpio_data, |
@@ -348,6 +348,8 @@ static void __init vision_init_machine(void) | |||
348 | "pca9539:74")) | 348 | "pca9539:74")) |
349 | pr_warn("cannot request interrupt gpio for pca9539:74\n"); | 349 | pr_warn("cannot request interrupt gpio for pca9539:74\n"); |
350 | 350 | ||
351 | vision_i2c_info[1].irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)); | ||
352 | |||
351 | ep93xx_register_i2c(&vision_i2c_gpio_data, vision_i2c_info, | 353 | ep93xx_register_i2c(&vision_i2c_gpio_data, vision_i2c_info, |
352 | ARRAY_SIZE(vision_i2c_info)); | 354 | ARRAY_SIZE(vision_i2c_info)); |
353 | ep93xx_register_spi(&vision_spi_master, vision_spi_board_info, | 355 | ep93xx_register_spi(&vision_spi_master, vision_spi_board_info, |
diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c index a5823a7f249e..13312ccb2d93 100644 --- a/arch/arm/mach-exynos/clock-exynos4210.c +++ b/arch/arm/mach-exynos/clock-exynos4210.c | |||
@@ -32,6 +32,7 @@ | |||
32 | 32 | ||
33 | #include "common.h" | 33 | #include "common.h" |
34 | 34 | ||
35 | #ifdef CONFIG_PM_SLEEP | ||
35 | static struct sleep_save exynos4210_clock_save[] = { | 36 | static struct sleep_save exynos4210_clock_save[] = { |
36 | SAVE_ITEM(S5P_CLKSRC_IMAGE), | 37 | SAVE_ITEM(S5P_CLKSRC_IMAGE), |
37 | SAVE_ITEM(S5P_CLKSRC_LCD1), | 38 | SAVE_ITEM(S5P_CLKSRC_LCD1), |
@@ -42,6 +43,7 @@ static struct sleep_save exynos4210_clock_save[] = { | |||
42 | SAVE_ITEM(S5P_CLKGATE_IP_LCD1), | 43 | SAVE_ITEM(S5P_CLKGATE_IP_LCD1), |
43 | SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210), | 44 | SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210), |
44 | }; | 45 | }; |
46 | #endif | ||
45 | 47 | ||
46 | static struct clksrc_clk *sysclks[] = { | 48 | static struct clksrc_clk *sysclks[] = { |
47 | /* nothing here yet */ | 49 | /* nothing here yet */ |
diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c index 26a668b0d101..48af28566fa1 100644 --- a/arch/arm/mach-exynos/clock-exynos4212.c +++ b/arch/arm/mach-exynos/clock-exynos4212.c | |||
@@ -32,12 +32,14 @@ | |||
32 | 32 | ||
33 | #include "common.h" | 33 | #include "common.h" |
34 | 34 | ||
35 | #ifdef CONFIG_PM_SLEEP | ||
35 | static struct sleep_save exynos4212_clock_save[] = { | 36 | static struct sleep_save exynos4212_clock_save[] = { |
36 | SAVE_ITEM(S5P_CLKSRC_IMAGE), | 37 | SAVE_ITEM(S5P_CLKSRC_IMAGE), |
37 | SAVE_ITEM(S5P_CLKDIV_IMAGE), | 38 | SAVE_ITEM(S5P_CLKDIV_IMAGE), |
38 | SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212), | 39 | SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212), |
39 | SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212), | 40 | SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212), |
40 | }; | 41 | }; |
42 | #endif | ||
41 | 43 | ||
42 | static struct clk *clk_src_mpll_user_list[] = { | 44 | static struct clk *clk_src_mpll_user_list[] = { |
43 | [0] = &clk_fin_mpll, | 45 | [0] = &clk_fin_mpll, |
diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c index 5a8c42e90005..187287aa57ab 100644 --- a/arch/arm/mach-exynos/clock.c +++ b/arch/arm/mach-exynos/clock.c | |||
@@ -30,6 +30,7 @@ | |||
30 | 30 | ||
31 | #include "common.h" | 31 | #include "common.h" |
32 | 32 | ||
33 | #ifdef CONFIG_PM_SLEEP | ||
33 | static struct sleep_save exynos4_clock_save[] = { | 34 | static struct sleep_save exynos4_clock_save[] = { |
34 | SAVE_ITEM(S5P_CLKDIV_LEFTBUS), | 35 | SAVE_ITEM(S5P_CLKDIV_LEFTBUS), |
35 | SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS), | 36 | SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS), |
@@ -93,6 +94,7 @@ static struct sleep_save exynos4_clock_save[] = { | |||
93 | SAVE_ITEM(S5P_CLKGATE_SCLKCPU), | 94 | SAVE_ITEM(S5P_CLKGATE_SCLKCPU), |
94 | SAVE_ITEM(S5P_CLKGATE_IP_CPU), | 95 | SAVE_ITEM(S5P_CLKGATE_IP_CPU), |
95 | }; | 96 | }; |
97 | #endif | ||
96 | 98 | ||
97 | struct clk clk_sclk_hdmi27m = { | 99 | struct clk clk_sclk_hdmi27m = { |
98 | .name = "sclk_hdmi27m", | 100 | .name = "sclk_hdmi27m", |
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c index 85fa02767d67..e6b02fdf1b09 100644 --- a/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c | |||
@@ -15,11 +15,13 @@ | |||
15 | #include <linux/serial_core.h> | 15 | #include <linux/serial_core.h> |
16 | 16 | ||
17 | #include <asm/mach/arch.h> | 17 | #include <asm/mach/arch.h> |
18 | #include <asm/hardware/gic.h> | ||
18 | #include <mach/map.h> | 19 | #include <mach/map.h> |
19 | 20 | ||
20 | #include <plat/cpu.h> | 21 | #include <plat/cpu.h> |
21 | #include <plat/regs-serial.h> | 22 | #include <plat/regs-serial.h> |
22 | #include <plat/exynos4.h> | 23 | |
24 | #include "common.h" | ||
23 | 25 | ||
24 | /* | 26 | /* |
25 | * The following lookup table is used to override device names when devices | 27 | * The following lookup table is used to override device names when devices |
@@ -60,7 +62,7 @@ static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = { | |||
60 | 62 | ||
61 | static void __init exynos4210_dt_map_io(void) | 63 | static void __init exynos4210_dt_map_io(void) |
62 | { | 64 | { |
63 | s5p_init_io(NULL, 0, S5P_VA_CHIPID); | 65 | exynos_init_io(NULL, 0); |
64 | s3c24xx_init_clocks(24000000); | 66 | s3c24xx_init_clocks(24000000); |
65 | } | 67 | } |
66 | 68 | ||
@@ -79,7 +81,9 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)") | |||
79 | /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */ | 81 | /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */ |
80 | .init_irq = exynos4_init_irq, | 82 | .init_irq = exynos4_init_irq, |
81 | .map_io = exynos4210_dt_map_io, | 83 | .map_io = exynos4210_dt_map_io, |
84 | .handle_irq = gic_handle_irq, | ||
82 | .init_machine = exynos4210_dt_machine_init, | 85 | .init_machine = exynos4210_dt_machine_init, |
83 | .timer = &exynos4_timer, | 86 | .timer = &exynos4_timer, |
84 | .dt_compat = exynos4210_dt_compat, | 87 | .dt_compat = exynos4210_dt_compat, |
88 | .restart = exynos4_restart, | ||
85 | MACHINE_END | 89 | MACHINE_END |
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index b895ec031105..435261f83f46 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c | |||
@@ -220,14 +220,14 @@ static struct s3c_fb_pd_win nuri_fb_win0 = { | |||
220 | .lower_margin = 1, | 220 | .lower_margin = 1, |
221 | .hsync_len = 48, | 221 | .hsync_len = 48, |
222 | .vsync_len = 3, | 222 | .vsync_len = 3, |
223 | .xres = 1280, | 223 | .xres = 1024, |
224 | .yres = 800, | 224 | .yres = 600, |
225 | .refresh = 60, | 225 | .refresh = 60, |
226 | }, | 226 | }, |
227 | .max_bpp = 24, | 227 | .max_bpp = 24, |
228 | .default_bpp = 16, | 228 | .default_bpp = 16, |
229 | .virtual_x = 1280, | 229 | .virtual_x = 1024, |
230 | .virtual_y = 800, | 230 | .virtual_y = 2 * 600, |
231 | }; | 231 | }; |
232 | 232 | ||
233 | static struct s3c_fb_platdata nuri_fb_pdata __initdata = { | 233 | static struct s3c_fb_platdata nuri_fb_pdata __initdata = { |
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 37ac93e8d6d9..0fc65ffde8ff 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c | |||
@@ -910,7 +910,7 @@ static struct s5p_fimc_isp_info universal_camera_sensors[] = { | |||
910 | .bus_type = FIMC_MIPI_CSI2, | 910 | .bus_type = FIMC_MIPI_CSI2, |
911 | .board_info = &m5mols_board_info, | 911 | .board_info = &m5mols_board_info, |
912 | .i2c_bus_num = 0, | 912 | .i2c_bus_num = 0, |
913 | .clk_frequency = 21600000UL, | 913 | .clk_frequency = 24000000UL, |
914 | .csi_data_align = 32, | 914 | .csi_data_align = 32, |
915 | }, | 915 | }, |
916 | }; | 916 | }; |
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index a4f61a43c7ba..e19013051772 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c | |||
@@ -206,7 +206,7 @@ static void exynos4_pm_prepare(void) | |||
206 | 206 | ||
207 | } | 207 | } |
208 | 208 | ||
209 | static int exynos4_pm_add(struct device *dev) | 209 | static int exynos4_pm_add(struct device *dev, struct subsys_interface *sif) |
210 | { | 210 | { |
211 | pm_cpu_prep = exynos4_pm_prepare; | 211 | pm_cpu_prep = exynos4_pm_prepare; |
212 | pm_cpu_sleep = exynos4_cpu_suspend; | 212 | pm_cpu_sleep = exynos4_cpu_suspend; |
@@ -384,7 +384,9 @@ static void exynos4_pm_resume(void) | |||
384 | 384 | ||
385 | exynos4_restore_pll(); | 385 | exynos4_restore_pll(); |
386 | 386 | ||
387 | #ifdef CONFIG_SMP | ||
387 | scu_enable(S5P_VA_SCU); | 388 | scu_enable(S5P_VA_SCU); |
389 | #endif | ||
388 | 390 | ||
389 | #ifdef CONFIG_CACHE_L2X0 | 391 | #ifdef CONFIG_CACHE_L2X0 |
390 | s3c_pm_do_restore_core(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save)); | 392 | s3c_pm_do_restore_core(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save)); |
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index cc15426787b1..77d4852e19f2 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c | |||
@@ -27,6 +27,7 @@ | |||
27 | #include <plat/cache-feroceon-l2.h> | 27 | #include <plat/cache-feroceon-l2.h> |
28 | #include <plat/mvsdio.h> | 28 | #include <plat/mvsdio.h> |
29 | #include <plat/orion_nand.h> | 29 | #include <plat/orion_nand.h> |
30 | #include <plat/ehci-orion.h> | ||
30 | #include <plat/common.h> | 31 | #include <plat/common.h> |
31 | #include <plat/time.h> | 32 | #include <plat/time.h> |
32 | #include <plat/addr-map.h> | 33 | #include <plat/addr-map.h> |
@@ -73,7 +74,7 @@ unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED; | |||
73 | void __init kirkwood_ehci_init(void) | 74 | void __init kirkwood_ehci_init(void) |
74 | { | 75 | { |
75 | kirkwood_clk_ctrl |= CGC_USB0; | 76 | kirkwood_clk_ctrl |= CGC_USB0; |
76 | orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB); | 77 | orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB, EHCI_PHY_NA); |
77 | } | 78 | } |
78 | 79 | ||
79 | 80 | ||
diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h index e8fda45c0736..d5a0d1da2e0e 100644 --- a/arch/arm/mach-kirkwood/mpp.h +++ b/arch/arm/mach-kirkwood/mpp.h | |||
@@ -31,314 +31,314 @@ | |||
31 | #define MPP_F6282_MASK MPP( 0, 0x0, 0, 0, 0, 0, 0, 0, 1 ) | 31 | #define MPP_F6282_MASK MPP( 0, 0x0, 0, 0, 0, 0, 0, 0, 1 ) |
32 | 32 | ||
33 | #define MPP0_GPIO MPP( 0, 0x0, 1, 1, 1, 1, 1, 1, 1 ) | 33 | #define MPP0_GPIO MPP( 0, 0x0, 1, 1, 1, 1, 1, 1, 1 ) |
34 | #define MPP0_NF_IO2 MPP( 0, 0x1, 1, 1, 1, 1, 1, 1, 1 ) | 34 | #define MPP0_NF_IO2 MPP( 0, 0x1, 0, 0, 1, 1, 1, 1, 1 ) |
35 | #define MPP0_SPI_SCn MPP( 0, 0x2, 0, 1, 1, 1, 1, 1, 1 ) | 35 | #define MPP0_SPI_SCn MPP( 0, 0x2, 0, 0, 1, 1, 1, 1, 1 ) |
36 | 36 | ||
37 | #define MPP1_GPO MPP( 1, 0x0, 0, 1, 1, 1, 1, 1, 1 ) | 37 | #define MPP1_GPO MPP( 1, 0x0, 0, 1, 1, 1, 1, 1, 1 ) |
38 | #define MPP1_NF_IO3 MPP( 1, 0x1, 1, 1, 1, 1, 1, 1, 1 ) | 38 | #define MPP1_NF_IO3 MPP( 1, 0x1, 0, 0, 1, 1, 1, 1, 1 ) |
39 | #define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 1, 1, 1, 1, 1, 1 ) | 39 | #define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 0, 1, 1, 1, 1, 1 ) |
40 | 40 | ||
41 | #define MPP2_GPO MPP( 2, 0x0, 0, 1, 1, 1, 1, 1, 1 ) | 41 | #define MPP2_GPO MPP( 2, 0x0, 0, 1, 1, 1, 1, 1, 1 ) |
42 | #define MPP2_NF_IO4 MPP( 2, 0x1, 1, 1, 1, 1, 1, 1, 1 ) | 42 | #define MPP2_NF_IO4 MPP( 2, 0x1, 0, 0, 1, 1, 1, 1, 1 ) |
43 | #define MPP2_SPI_SCK MPP( 2, 0x2, 0, 1, 1, 1, 1, 1, 1 ) | 43 | #define MPP2_SPI_SCK MPP( 2, 0x2, 0, 0, 1, 1, 1, 1, 1 ) |
44 | 44 | ||
45 | #define MPP3_GPO MPP( 3, 0x0, 0, 1, 1, 1, 1, 1, 1 ) | 45 | #define MPP3_GPO MPP( 3, 0x0, 0, 1, 1, 1, 1, 1, 1 ) |
46 | #define MPP3_NF_IO5 MPP( 3, 0x1, 1, 1, 1, 1, 1, 1, 1 ) | 46 | #define MPP3_NF_IO5 MPP( 3, 0x1, 0, 0, 1, 1, 1, 1, 1 ) |
47 | #define MPP3_SPI_MISO MPP( 3, 0x2, 1, 0, 1, 1, 1, 1, 1 ) | 47 | #define MPP3_SPI_MISO MPP( 3, 0x2, 0, 0, 1, 1, 1, 1, 1 ) |
48 | 48 | ||
49 | #define MPP4_GPIO MPP( 4, 0x0, 1, 1, 1, 1, 1, 1, 1 ) | 49 | #define MPP4_GPIO MPP( 4, 0x0, 1, 1, 1, 1, 1, 1, 1 ) |
50 | #define MPP4_NF_IO6 MPP( 4, 0x1, 1, 1, 1, 1, 1, 1, 1 ) | 50 | #define MPP4_NF_IO6 MPP( 4, 0x1, 0, 0, 1, 1, 1, 1, 1 ) |
51 | #define MPP4_UART0_RXD MPP( 4, 0x2, 1, 0, 1, 1, 1, 1, 1 ) | 51 | #define MPP4_UART0_RXD MPP( 4, 0x2, 0, 0, 1, 1, 1, 1, 1 ) |
52 | #define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 1, 0, 0, 1, 1, 1 ) | 52 | #define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 0, 0, 0, 1, 1, 1 ) |
53 | #define MPP4_LCD_VGA_HSYNC MPP( 4, 0xb, 0, 0, 0, 0, 0, 0, 1 ) | 53 | #define MPP4_LCD_VGA_HSYNC MPP( 4, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
54 | #define MPP4_PTP_CLK MPP( 4, 0xd, 1, 0, 1, 1, 1, 1, 0 ) | 54 | #define MPP4_PTP_CLK MPP( 4, 0xd, 0, 0, 1, 1, 1, 1, 0 ) |
55 | 55 | ||
56 | #define MPP5_GPO MPP( 5, 0x0, 0, 1, 1, 1, 1, 1, 1 ) | 56 | #define MPP5_GPO MPP( 5, 0x0, 0, 1, 1, 1, 1, 1, 1 ) |
57 | #define MPP5_NF_IO7 MPP( 5, 0x1, 1, 1, 1, 1, 1, 1, 1 ) | 57 | #define MPP5_NF_IO7 MPP( 5, 0x1, 0, 0, 1, 1, 1, 1, 1 ) |
58 | #define MPP5_UART0_TXD MPP( 5, 0x2, 0, 1, 1, 1, 1, 1, 1 ) | 58 | #define MPP5_UART0_TXD MPP( 5, 0x2, 0, 0, 1, 1, 1, 1, 1 ) |
59 | #define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 1, 1, 1, 1, 1, 0 ) | 59 | #define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 0, 1, 1, 1, 1, 0 ) |
60 | #define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 1, 0, 1, 1, 1, 1 ) | 60 | #define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 0, 0, 1, 1, 1, 1 ) |
61 | #define MPP5_LCD_VGA_VSYNC MPP( 5, 0xb, 0, 0, 0, 0, 0, 0, 1 ) | 61 | #define MPP5_LCD_VGA_VSYNC MPP( 5, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
62 | 62 | ||
63 | #define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 1, 1, 1, 1, 1, 1 ) | 63 | #define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 0, 1, 1, 1, 1, 1 ) |
64 | #define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 1, 1, 1, 1, 1, 1 ) | 64 | #define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 0, 1, 1, 1, 1, 1 ) |
65 | #define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 1, 1, 1, 1, 1, 0 ) | 65 | #define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 0, 1, 1, 1, 1, 0 ) |
66 | 66 | ||
67 | #define MPP7_GPO MPP( 7, 0x0, 0, 1, 1, 1, 1, 1, 1 ) | 67 | #define MPP7_GPO MPP( 7, 0x0, 0, 1, 1, 1, 1, 1, 1 ) |
68 | #define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 1, 1, 1, 1, 1, 0 ) | 68 | #define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 0, 1, 1, 1, 1, 0 ) |
69 | #define MPP7_SPI_SCn MPP( 7, 0x2, 0, 1, 1, 1, 1, 1, 1 ) | 69 | #define MPP7_SPI_SCn MPP( 7, 0x2, 0, 0, 1, 1, 1, 1, 1 ) |
70 | #define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 1, 1, 1, 1, 1, 0 ) | 70 | #define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 0, 1, 1, 1, 1, 0 ) |
71 | #define MPP7_LCD_PWM MPP( 7, 0xb, 0, 1, 0, 0, 0, 0, 1 ) | 71 | #define MPP7_LCD_PWM MPP( 7, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
72 | 72 | ||
73 | #define MPP8_GPIO MPP( 8, 0x0, 1, 1, 1, 1, 1, 1, 1 ) | 73 | #define MPP8_GPIO MPP( 8, 0x0, 1, 1, 1, 1, 1, 1, 1 ) |
74 | #define MPP8_TW0_SDA MPP( 8, 0x1, 1, 1, 1, 1, 1, 1, 1 ) | 74 | #define MPP8_TW0_SDA MPP( 8, 0x1, 0, 0, 1, 1, 1, 1, 1 ) |
75 | #define MPP8_UART0_RTS MPP( 8, 0x2, 0, 1, 1, 1, 1, 1, 1 ) | 75 | #define MPP8_UART0_RTS MPP( 8, 0x2, 0, 0, 1, 1, 1, 1, 1 ) |
76 | #define MPP8_UART1_RTS MPP( 8, 0x3, 0, 1, 1, 1, 1, 1, 1 ) | 76 | #define MPP8_UART1_RTS MPP( 8, 0x3, 0, 0, 1, 1, 1, 1, 1 ) |
77 | #define MPP8_MII0_RXERR MPP( 8, 0x4, 1, 0, 0, 1, 1, 1, 1 ) | 77 | #define MPP8_MII0_RXERR MPP( 8, 0x4, 0, 0, 0, 1, 1, 1, 1 ) |
78 | #define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 1, 0, 0, 1, 1, 1 ) | 78 | #define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 0, 0, 0, 1, 1, 1 ) |
79 | #define MPP8_PTP_CLK MPP( 8, 0xc, 1, 0, 1, 1, 1, 1, 0 ) | 79 | #define MPP8_PTP_CLK MPP( 8, 0xc, 0, 0, 1, 1, 1, 1, 0 ) |
80 | #define MPP8_MII0_COL MPP( 8, 0xd, 1, 0, 1, 1, 1, 1, 1 ) | 80 | #define MPP8_MII0_COL MPP( 8, 0xd, 0, 0, 1, 1, 1, 1, 1 ) |
81 | 81 | ||
82 | #define MPP9_GPIO MPP( 9, 0x0, 1, 1, 1, 1, 1, 1, 1 ) | 82 | #define MPP9_GPIO MPP( 9, 0x0, 1, 1, 1, 1, 1, 1, 1 ) |
83 | #define MPP9_TW0_SCK MPP( 9, 0x1, 1, 1, 1, 1, 1, 1, 1 ) | 83 | #define MPP9_TW0_SCK MPP( 9, 0x1, 0, 0, 1, 1, 1, 1, 1 ) |
84 | #define MPP9_UART0_CTS MPP( 9, 0x2, 1, 0, 1, 1, 1, 1, 1 ) | 84 | #define MPP9_UART0_CTS MPP( 9, 0x2, 0, 0, 1, 1, 1, 1, 1 ) |
85 | #define MPP9_UART1_CTS MPP( 9, 0x3, 1, 0, 1, 1, 1, 1, 1 ) | 85 | #define MPP9_UART1_CTS MPP( 9, 0x3, 0, 0, 1, 1, 1, 1, 1 ) |
86 | #define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 1, 0, 1, 1, 1, 1 ) | 86 | #define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 0, 0, 1, 1, 1, 1 ) |
87 | #define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 1, 0, 1, 1, 1, 1, 0 ) | 87 | #define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 0, 0, 1, 1, 1, 1, 0 ) |
88 | #define MPP9_MII0_CRS MPP( 9, 0xd, 1, 0, 1, 1, 1, 1, 1 ) | 88 | #define MPP9_MII0_CRS MPP( 9, 0xd, 0, 0, 1, 1, 1, 1, 1 ) |
89 | 89 | ||
90 | #define MPP10_GPO MPP( 10, 0x0, 0, 1, 1, 1, 1, 1, 1 ) | 90 | #define MPP10_GPO MPP( 10, 0x0, 0, 1, 1, 1, 1, 1, 1 ) |
91 | #define MPP10_SPI_SCK MPP( 10, 0x2, 0, 1, 1, 1, 1, 1, 1 ) | 91 | #define MPP10_SPI_SCK MPP( 10, 0x2, 0, 0, 1, 1, 1, 1, 1 ) |
92 | #define MPP10_UART0_TXD MPP( 10, 0X3, 0, 1, 1, 1, 1, 1, 1 ) | 92 | #define MPP10_UART0_TXD MPP( 10, 0X3, 0, 0, 1, 1, 1, 1, 1 ) |
93 | #define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 1, 0, 0, 1, 1, 1 ) | 93 | #define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 0, 0, 0, 1, 1, 1 ) |
94 | #define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 1, 1, 1, 1, 1, 0 ) | 94 | #define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 0, 1, 1, 1, 1, 0 ) |
95 | 95 | ||
96 | #define MPP11_GPIO MPP( 11, 0x0, 1, 1, 1, 1, 1, 1, 1 ) | 96 | #define MPP11_GPIO MPP( 11, 0x0, 1, 1, 1, 1, 1, 1, 1 ) |
97 | #define MPP11_SPI_MISO MPP( 11, 0x2, 1, 0, 1, 1, 1, 1, 1 ) | 97 | #define MPP11_SPI_MISO MPP( 11, 0x2, 0, 0, 1, 1, 1, 1, 1 ) |
98 | #define MPP11_UART0_RXD MPP( 11, 0x3, 1, 0, 1, 1, 1, 1, 1 ) | 98 | #define MPP11_UART0_RXD MPP( 11, 0x3, 0, 0, 1, 1, 1, 1, 1 ) |
99 | #define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 1, 0, 1, 1, 1, 1, 0 ) | 99 | #define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 0, 0, 1, 1, 1, 1, 0 ) |
100 | #define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 1, 1, 1, 1, 1, 0 ) | 100 | #define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 0, 1, 1, 1, 1, 0 ) |
101 | #define MPP11_PTP_CLK MPP( 11, 0xd, 1, 0, 1, 1, 1, 1, 0 ) | 101 | #define MPP11_PTP_CLK MPP( 11, 0xd, 0, 0, 1, 1, 1, 1, 0 ) |
102 | #define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 1, 0, 1, 1, 1, 1 ) | 102 | #define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 0, 0, 1, 1, 1, 1 ) |
103 | 103 | ||
104 | #define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1, 1 ) | 104 | #define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1, 1 ) |
105 | #define MPP12_GPIO MPP( 12, 0x0, 1, 1, 0, 0, 0, 1, 0 ) | 105 | #define MPP12_GPIO MPP( 12, 0x0, 1, 1, 0, 0, 0, 1, 0 ) |
106 | #define MPP12_SD_CLK MPP( 12, 0x1, 0, 1, 1, 1, 1, 1, 1 ) | 106 | #define MPP12_SD_CLK MPP( 12, 0x1, 0, 0, 1, 1, 1, 1, 1 ) |
107 | #define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 1, 0, 0, 0, 0, 1 ) | 107 | #define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 0, 0, 0, 0, 0, 1 ) |
108 | #define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 1, 0, 0, 0, 0, 1 ) | 108 | #define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
109 | #define MPP12_TW1_SDA MPP( 12, 0xd, 1, 0, 0, 0, 0, 0, 1 ) | 109 | #define MPP12_TW1_SDA MPP( 12, 0xd, 0, 0, 0, 0, 0, 0, 1 ) |
110 | 110 | ||
111 | #define MPP13_GPIO MPP( 13, 0x0, 1, 1, 1, 1, 1, 1, 1 ) | 111 | #define MPP13_GPIO MPP( 13, 0x0, 1, 1, 1, 1, 1, 1, 1 ) |
112 | #define MPP13_SD_CMD MPP( 13, 0x1, 1, 1, 1, 1, 1, 1, 1 ) | 112 | #define MPP13_SD_CMD MPP( 13, 0x1, 0, 0, 1, 1, 1, 1, 1 ) |
113 | #define MPP13_UART1_TXD MPP( 13, 0x3, 0, 1, 1, 1, 1, 1, 1 ) | 113 | #define MPP13_UART1_TXD MPP( 13, 0x3, 0, 0, 1, 1, 1, 1, 1 ) |
114 | #define MPP13_AU_SPDIFRMCLK MPP( 13, 0xa, 0, 1, 0, 0, 0, 0, 1 ) | 114 | #define MPP13_AU_SPDIFRMCLK MPP( 13, 0xa, 0, 0, 0, 0, 0, 0, 1 ) |
115 | #define MPP13_LCDPWM MPP( 13, 0xb, 0, 1, 0, 0, 0, 0, 1 ) | 115 | #define MPP13_LCDPWM MPP( 13, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
116 | 116 | ||
117 | #define MPP14_GPIO MPP( 14, 0x0, 1, 1, 1, 1, 1, 1, 1 ) | 117 | #define MPP14_GPIO MPP( 14, 0x0, 1, 1, 1, 1, 1, 1, 1 ) |
118 | #define MPP14_SD_D0 MPP( 14, 0x1, 1, 1, 1, 1, 1, 1, 1 ) | 118 | #define MPP14_SD_D0 MPP( 14, 0x1, 0, 0, 1, 1, 1, 1, 1 ) |
119 | #define MPP14_UART1_RXD MPP( 14, 0x3, 1, 0, 1, 1, 1, 1, 1 ) | 119 | #define MPP14_UART1_RXD MPP( 14, 0x3, 0, 0, 1, 1, 1, 1, 1 ) |
120 | #define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 1, 0, 0, 1, 1, 1 ) | 120 | #define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 0, 0, 0, 1, 1, 1 ) |
121 | #define MPP14_AU_SPDIFI MPP( 14, 0xa, 1, 0, 0, 0, 0, 0, 1 ) | 121 | #define MPP14_AU_SPDIFI MPP( 14, 0xa, 0, 0, 0, 0, 0, 0, 1 ) |
122 | #define MPP14_AU_I2SDI MPP( 14, 0xb, 1, 0, 0, 0, 0, 0, 1 ) | 122 | #define MPP14_AU_I2SDI MPP( 14, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
123 | #define MPP14_MII0_COL MPP( 14, 0xd, 1, 0, 1, 1, 1, 1, 1 ) | 123 | #define MPP14_MII0_COL MPP( 14, 0xd, 0, 0, 1, 1, 1, 1, 1 ) |
124 | 124 | ||
125 | #define MPP15_GPIO MPP( 15, 0x0, 1, 1, 1, 1, 1, 1, 1 ) | 125 | #define MPP15_GPIO MPP( 15, 0x0, 1, 1, 1, 1, 1, 1, 1 ) |
126 | #define MPP15_SD_D1 MPP( 15, 0x1, 1, 1, 1, 1, 1, 1, 1 ) | 126 | #define MPP15_SD_D1 MPP( 15, 0x1, 0, 0, 1, 1, 1, 1, 1 ) |
127 | #define MPP15_UART0_RTS MPP( 15, 0x2, 0, 1, 1, 1, 1, 1, 1 ) | 127 | #define MPP15_UART0_RTS MPP( 15, 0x2, 0, 0, 1, 1, 1, 1, 1 ) |
128 | #define MPP15_UART1_TXD MPP( 15, 0x3, 0, 1, 1, 1, 1, 1, 1 ) | 128 | #define MPP15_UART1_TXD MPP( 15, 0x3, 0, 0, 1, 1, 1, 1, 1 ) |
129 | #define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 1, 0, 1, 1, 1, 1 ) | 129 | #define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 0, 0, 1, 1, 1, 1 ) |
130 | #define MPP15_SPI_CSn MPP( 15, 0xb, 0, 1, 0, 0, 0, 0, 1 ) | 130 | #define MPP15_SPI_CSn MPP( 15, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
131 | 131 | ||
132 | #define MPP16_GPIO MPP( 16, 0x0, 1, 1, 1, 1, 1, 1, 1 ) | 132 | #define MPP16_GPIO MPP( 16, 0x0, 1, 1, 1, 1, 1, 1, 1 ) |
133 | #define MPP16_SD_D2 MPP( 16, 0x1, 1, 1, 1, 1, 1, 1, 1 ) | 133 | #define MPP16_SD_D2 MPP( 16, 0x1, 0, 0, 1, 1, 1, 1, 1 ) |
134 | #define MPP16_UART0_CTS MPP( 16, 0x2, 1, 0, 1, 1, 1, 1, 1 ) | 134 | #define MPP16_UART0_CTS MPP( 16, 0x2, 0, 0, 1, 1, 1, 1, 1 ) |
135 | #define MPP16_UART1_RXD MPP( 16, 0x3, 1, 0, 1, 1, 1, 1, 1 ) | 135 | #define MPP16_UART1_RXD MPP( 16, 0x3, 0, 0, 1, 1, 1, 1, 1 ) |
136 | #define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 1, 0, 0, 1, 1, 1 ) | 136 | #define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 0, 0, 0, 1, 1, 1 ) |
137 | #define MPP16_LCD_EXT_REF_CLK MPP( 16, 0xb, 1, 0, 0, 0, 0, 0, 1 ) | 137 | #define MPP16_LCD_EXT_REF_CLK MPP( 16, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
138 | #define MPP16_MII0_CRS MPP( 16, 0xd, 1, 0, 1, 1, 1, 1, 1 ) | 138 | #define MPP16_MII0_CRS MPP( 16, 0xd, 0, 0, 1, 1, 1, 1, 1 ) |
139 | 139 | ||
140 | #define MPP17_GPIO MPP( 17, 0x0, 1, 1, 1, 1, 1, 1, 1 ) | 140 | #define MPP17_GPIO MPP( 17, 0x0, 1, 1, 1, 1, 1, 1, 1 ) |
141 | #define MPP17_SD_D3 MPP( 17, 0x1, 1, 1, 1, 1, 1, 1, 1 ) | 141 | #define MPP17_SD_D3 MPP( 17, 0x1, 0, 0, 1, 1, 1, 1, 1 ) |
142 | #define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 1, 0, 1, 1, 1, 1 ) | 142 | #define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 0, 0, 1, 1, 1, 1 ) |
143 | #define MPP17_SATA1_ACTn MPP( 17, 0xa, 0, 1, 0, 0, 0, 0, 1 ) | 143 | #define MPP17_SATA1_ACTn MPP( 17, 0xa, 0, 0, 0, 0, 0, 0, 1 ) |
144 | #define MPP17_TW1_SCK MPP( 17, 0xd, 1, 1, 0, 0, 0, 0, 1 ) | 144 | #define MPP17_TW1_SCK MPP( 17, 0xd, 0, 0, 0, 0, 0, 0, 1 ) |
145 | 145 | ||
146 | #define MPP18_GPO MPP( 18, 0x0, 0, 1, 1, 1, 1, 1, 1 ) | 146 | #define MPP18_GPO MPP( 18, 0x0, 0, 1, 1, 1, 1, 1, 1 ) |
147 | #define MPP18_NF_IO0 MPP( 18, 0x1, 1, 1, 1, 1, 1, 1, 1 ) | 147 | #define MPP18_NF_IO0 MPP( 18, 0x1, 0, 0, 1, 1, 1, 1, 1 ) |
148 | #define MPP18_PEX0_CLKREQ MPP( 18, 0x2, 0, 1, 0, 0, 0, 0, 1 ) | 148 | #define MPP18_PEX0_CLKREQ MPP( 18, 0x2, 0, 0, 0, 0, 0, 0, 1 ) |
149 | 149 | ||
150 | #define MPP19_GPO MPP( 19, 0x0, 0, 1, 1, 1, 1, 1, 1 ) | 150 | #define MPP19_GPO MPP( 19, 0x0, 0, 1, 1, 1, 1, 1, 1 ) |
151 | #define MPP19_NF_IO1 MPP( 19, 0x1, 1, 1, 1, 1, 1, 1, 1 ) | 151 | #define MPP19_NF_IO1 MPP( 19, 0x1, 0, 0, 1, 1, 1, 1, 1 ) |
152 | 152 | ||
153 | #define MPP20_GPIO MPP( 20, 0x0, 1, 1, 0, 1, 1, 1, 1 ) | 153 | #define MPP20_GPIO MPP( 20, 0x0, 1, 1, 0, 1, 1, 1, 1 ) |
154 | #define MPP20_TSMP0 MPP( 20, 0x1, 1, 1, 0, 0, 1, 1, 1 ) | 154 | #define MPP20_TSMP0 MPP( 20, 0x1, 0, 0, 0, 0, 1, 1, 1 ) |
155 | #define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 1, 0, 0, 1, 1, 1 ) | 155 | #define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 0, 0, 0, 1, 1, 1 ) |
156 | #define MPP20_GE1_TXD0 MPP( 20, 0x3, 0, 0, 0, 1, 1, 1, 1 ) | 156 | #define MPP20_GE1_TXD0 MPP( 20, 0x3, 0, 0, 0, 1, 1, 1, 1 ) |
157 | #define MPP20_AU_SPDIFI MPP( 20, 0x4, 1, 0, 0, 0, 1, 1, 1 ) | 157 | #define MPP20_AU_SPDIFI MPP( 20, 0x4, 0, 0, 0, 0, 1, 1, 1 ) |
158 | #define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 1, 0, 0, 1, 1, 1 ) | 158 | #define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 0, 0, 0, 1, 1, 1 ) |
159 | #define MPP20_LCD_D0 MPP( 20, 0xb, 0, 0, 0, 0, 0, 0, 1 ) | 159 | #define MPP20_LCD_D0 MPP( 20, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
160 | 160 | ||
161 | #define MPP21_GPIO MPP( 21, 0x0, 1, 1, 0, 1, 1, 1, 1 ) | 161 | #define MPP21_GPIO MPP( 21, 0x0, 1, 1, 0, 1, 1, 1, 1 ) |
162 | #define MPP21_TSMP1 MPP( 21, 0x1, 1, 1, 0, 0, 1, 1, 1 ) | 162 | #define MPP21_TSMP1 MPP( 21, 0x1, 0, 0, 0, 0, 1, 1, 1 ) |
163 | #define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 1, 0, 0, 1, 1, 1 ) | 163 | #define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 0, 0, 0, 1, 1, 1 ) |
164 | #define MPP21_GE1_TXD1 MPP( 21, 0x3, 0, 0, 0, 1, 1, 1, 1 ) | 164 | #define MPP21_GE1_TXD1 MPP( 21, 0x3, 0, 0, 0, 1, 1, 1, 1 ) |
165 | #define MPP21_AU_SPDIFO MPP( 21, 0x4, 0, 1, 0, 0, 1, 1, 1 ) | 165 | #define MPP21_AU_SPDIFO MPP( 21, 0x4, 0, 0, 0, 0, 1, 1, 1 ) |
166 | #define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 1, 0, 1, 1, 1, 1 ) | 166 | #define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 0, 0, 1, 1, 1, 1 ) |
167 | #define MPP21_LCD_D1 MPP( 21, 0xb, 0, 0, 0, 0, 0, 0, 1 ) | 167 | #define MPP21_LCD_D1 MPP( 21, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
168 | 168 | ||
169 | #define MPP22_GPIO MPP( 22, 0x0, 1, 1, 0, 1, 1, 1, 1 ) | 169 | #define MPP22_GPIO MPP( 22, 0x0, 1, 1, 0, 1, 1, 1, 1 ) |
170 | #define MPP22_TSMP2 MPP( 22, 0x1, 1, 1, 0, 0, 1, 1, 1 ) | 170 | #define MPP22_TSMP2 MPP( 22, 0x1, 0, 0, 0, 0, 1, 1, 1 ) |
171 | #define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 1, 0, 0, 1, 1, 1 ) | 171 | #define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 0, 0, 0, 1, 1, 1 ) |
172 | #define MPP22_GE1_TXD2 MPP( 22, 0x3, 0, 0, 0, 1, 1, 1, 1 ) | 172 | #define MPP22_GE1_TXD2 MPP( 22, 0x3, 0, 0, 0, 1, 1, 1, 1 ) |
173 | #define MPP22_AU_SPDIFRMKCLK MPP( 22, 0x4, 0, 1, 0, 0, 1, 1, 1 ) | 173 | #define MPP22_AU_SPDIFRMKCLK MPP( 22, 0x4, 0, 0, 0, 0, 1, 1, 1 ) |
174 | #define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 1, 0, 0, 1, 1, 1 ) | 174 | #define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 0, 0, 0, 1, 1, 1 ) |
175 | #define MPP22_LCD_D2 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) | 175 | #define MPP22_LCD_D2 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
176 | 176 | ||
177 | #define MPP23_GPIO MPP( 23, 0x0, 1, 1, 0, 1, 1, 1, 1 ) | 177 | #define MPP23_GPIO MPP( 23, 0x0, 1, 1, 0, 1, 1, 1, 1 ) |
178 | #define MPP23_TSMP3 MPP( 23, 0x1, 1, 1, 0, 0, 1, 1, 1 ) | 178 | #define MPP23_TSMP3 MPP( 23, 0x1, 0, 0, 0, 0, 1, 1, 1 ) |
179 | #define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 1, 0, 0, 0, 1, 1, 1 ) | 179 | #define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 0, 0, 0, 0, 1, 1, 1 ) |
180 | #define MPP23_GE1_TXD3 MPP( 23, 0x3, 0, 0, 0, 1, 1, 1, 1 ) | 180 | #define MPP23_GE1_TXD3 MPP( 23, 0x3, 0, 0, 0, 1, 1, 1, 1 ) |
181 | #define MPP23_AU_I2SBCLK MPP( 23, 0x4, 0, 1, 0, 0, 1, 1, 1 ) | 181 | #define MPP23_AU_I2SBCLK MPP( 23, 0x4, 0, 0, 0, 0, 1, 1, 1 ) |
182 | #define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 1, 0, 1, 1, 1, 1 ) | 182 | #define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 0, 0, 1, 1, 1, 1 ) |
183 | #define MPP23_LCD_D3 MPP( 23, 0xb, 0, 0, 0, 0, 0, 0, 1 ) | 183 | #define MPP23_LCD_D3 MPP( 23, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
184 | 184 | ||
185 | #define MPP24_GPIO MPP( 24, 0x0, 1, 1, 0, 1, 1, 1, 1 ) | 185 | #define MPP24_GPIO MPP( 24, 0x0, 1, 1, 0, 1, 1, 1, 1 ) |
186 | #define MPP24_TSMP4 MPP( 24, 0x1, 1, 1, 0, 0, 1, 1, 1 ) | 186 | #define MPP24_TSMP4 MPP( 24, 0x1, 0, 0, 0, 0, 1, 1, 1 ) |
187 | #define MPP24_TDM_SPI_CS0 MPP( 24, 0x2, 0, 1, 0, 0, 1, 1, 1 ) | 187 | #define MPP24_TDM_SPI_CS0 MPP( 24, 0x2, 0, 0, 0, 0, 1, 1, 1 ) |
188 | #define MPP24_GE1_RXD0 MPP( 24, 0x3, 0, 0, 0, 1, 1, 1, 1 ) | 188 | #define MPP24_GE1_RXD0 MPP( 24, 0x3, 0, 0, 0, 1, 1, 1, 1 ) |
189 | #define MPP24_AU_I2SDO MPP( 24, 0x4, 0, 1, 0, 0, 1, 1, 1 ) | 189 | #define MPP24_AU_I2SDO MPP( 24, 0x4, 0, 0, 0, 0, 1, 1, 1 ) |
190 | #define MPP24_LCD_D4 MPP( 24, 0xb, 0, 0, 0, 0, 0, 0, 1 ) | 190 | #define MPP24_LCD_D4 MPP( 24, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
191 | 191 | ||
192 | #define MPP25_GPIO MPP( 25, 0x0, 1, 1, 0, 1, 1, 1, 1 ) | 192 | #define MPP25_GPIO MPP( 25, 0x0, 1, 1, 0, 1, 1, 1, 1 ) |
193 | #define MPP25_TSMP5 MPP( 25, 0x1, 1, 1, 0, 0, 1, 1, 1 ) | 193 | #define MPP25_TSMP5 MPP( 25, 0x1, 0, 0, 0, 0, 1, 1, 1 ) |
194 | #define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 1, 0, 0, 1, 1, 1 ) | 194 | #define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 0, 0, 0, 1, 1, 1 ) |
195 | #define MPP25_GE1_RXD1 MPP( 25, 0x3, 0, 0, 0, 1, 1, 1, 1 ) | 195 | #define MPP25_GE1_RXD1 MPP( 25, 0x3, 0, 0, 0, 1, 1, 1, 1 ) |
196 | #define MPP25_AU_I2SLRCLK MPP( 25, 0x4, 0, 1, 0, 0, 1, 1, 1 ) | 196 | #define MPP25_AU_I2SLRCLK MPP( 25, 0x4, 0, 0, 0, 0, 1, 1, 1 ) |
197 | #define MPP25_LCD_D5 MPP( 25, 0xb, 0, 0, 0, 0, 0, 0, 1 ) | 197 | #define MPP25_LCD_D5 MPP( 25, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
198 | 198 | ||
199 | #define MPP26_GPIO MPP( 26, 0x0, 1, 1, 0, 1, 1, 1, 1 ) | 199 | #define MPP26_GPIO MPP( 26, 0x0, 1, 1, 0, 1, 1, 1, 1 ) |
200 | #define MPP26_TSMP6 MPP( 26, 0x1, 1, 1, 0, 0, 1, 1, 1 ) | 200 | #define MPP26_TSMP6 MPP( 26, 0x1, 0, 0, 0, 0, 1, 1, 1 ) |
201 | #define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 1, 0, 0, 0, 1, 1, 1 ) | 201 | #define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 0, 0, 0, 0, 1, 1, 1 ) |
202 | #define MPP26_GE1_RXD2 MPP( 26, 0x3, 0, 0, 0, 1, 1, 1, 1 ) | 202 | #define MPP26_GE1_RXD2 MPP( 26, 0x3, 0, 0, 0, 1, 1, 1, 1 ) |
203 | #define MPP26_AU_I2SMCLK MPP( 26, 0x4, 0, 1, 0, 0, 1, 1, 1 ) | 203 | #define MPP26_AU_I2SMCLK MPP( 26, 0x4, 0, 0, 0, 0, 1, 1, 1 ) |
204 | #define MPP26_LCD_D6 MPP( 26, 0xb, 0, 0, 0, 0, 0, 0, 1 ) | 204 | #define MPP26_LCD_D6 MPP( 26, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
205 | 205 | ||
206 | #define MPP27_GPIO MPP( 27, 0x0, 1, 1, 0, 1, 1, 1, 1 ) | 206 | #define MPP27_GPIO MPP( 27, 0x0, 1, 1, 0, 1, 1, 1, 1 ) |
207 | #define MPP27_TSMP7 MPP( 27, 0x1, 1, 1, 0, 0, 1, 1, 1 ) | 207 | #define MPP27_TSMP7 MPP( 27, 0x1, 0, 0, 0, 0, 1, 1, 1 ) |
208 | #define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 1, 0, 0, 1, 1, 1 ) | 208 | #define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 0, 0, 0, 1, 1, 1 ) |
209 | #define MPP27_GE1_RXD3 MPP( 27, 0x3, 0, 0, 0, 1, 1, 1, 1 ) | 209 | #define MPP27_GE1_RXD3 MPP( 27, 0x3, 0, 0, 0, 1, 1, 1, 1 ) |
210 | #define MPP27_AU_I2SDI MPP( 27, 0x4, 1, 0, 0, 0, 1, 1, 1 ) | 210 | #define MPP27_AU_I2SDI MPP( 27, 0x4, 0, 0, 0, 0, 1, 1, 1 ) |
211 | #define MPP27_LCD_D7 MPP( 27, 0xb, 0, 0, 0, 0, 0, 0, 1 ) | 211 | #define MPP27_LCD_D7 MPP( 27, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
212 | 212 | ||
213 | #define MPP28_GPIO MPP( 28, 0x0, 1, 1, 0, 1, 1, 1, 1 ) | 213 | #define MPP28_GPIO MPP( 28, 0x0, 1, 1, 0, 1, 1, 1, 1 ) |
214 | #define MPP28_TSMP8 MPP( 28, 0x1, 1, 1, 0, 0, 1, 1, 1 ) | 214 | #define MPP28_TSMP8 MPP( 28, 0x1, 0, 0, 0, 0, 1, 1, 1 ) |
215 | #define MPP28_TDM_CODEC_INTn MPP( 28, 0x2, 0, 0, 0, 0, 1, 1, 1 ) | 215 | #define MPP28_TDM_CODEC_INTn MPP( 28, 0x2, 0, 0, 0, 0, 1, 1, 1 ) |
216 | #define MPP28_GE1_COL MPP( 28, 0x3, 0, 0, 0, 1, 1, 1, 1 ) | 216 | #define MPP28_GE1_COL MPP( 28, 0x3, 0, 0, 0, 1, 1, 1, 1 ) |
217 | #define MPP28_AU_EXTCLK MPP( 28, 0x4, 1, 0, 0, 0, 1, 1, 1 ) | 217 | #define MPP28_AU_EXTCLK MPP( 28, 0x4, 0, 0, 0, 0, 1, 1, 1 ) |
218 | #define MPP28_LCD_D8 MPP( 28, 0xb, 0, 0, 0, 0, 0, 0, 1 ) | 218 | #define MPP28_LCD_D8 MPP( 28, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
219 | 219 | ||
220 | #define MPP29_GPIO MPP( 29, 0x0, 1, 1, 0, 1, 1, 1, 1 ) | 220 | #define MPP29_GPIO MPP( 29, 0x0, 1, 1, 0, 1, 1, 1, 1 ) |
221 | #define MPP29_TSMP9 MPP( 29, 0x1, 1, 1, 0, 0, 1, 1, 1 ) | 221 | #define MPP29_TSMP9 MPP( 29, 0x1, 0, 0, 0, 0, 1, 1, 1 ) |
222 | #define MPP29_TDM_CODEC_RSTn MPP( 29, 0x2, 0, 0, 0, 0, 1, 1, 1 ) | 222 | #define MPP29_TDM_CODEC_RSTn MPP( 29, 0x2, 0, 0, 0, 0, 1, 1, 1 ) |
223 | #define MPP29_GE1_TCLK MPP( 29, 0x3, 0, 0, 0, 1, 1, 1, 1 ) | 223 | #define MPP29_GE1_TCLK MPP( 29, 0x3, 0, 0, 0, 1, 1, 1, 1 ) |
224 | #define MPP29_LCD_D9 MPP( 29, 0xb, 0, 0, 0, 0, 0, 0, 1 ) | 224 | #define MPP29_LCD_D9 MPP( 29, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
225 | 225 | ||
226 | #define MPP30_GPIO MPP( 30, 0x0, 1, 1, 0, 1, 1, 1, 1 ) | 226 | #define MPP30_GPIO MPP( 30, 0x0, 1, 1, 0, 1, 1, 1, 1 ) |
227 | #define MPP30_TSMP10 MPP( 30, 0x1, 1, 1, 0, 0, 1, 1, 1 ) | 227 | #define MPP30_TSMP10 MPP( 30, 0x1, 0, 0, 0, 0, 1, 1, 1 ) |
228 | #define MPP30_TDM_PCLK MPP( 30, 0x2, 1, 1, 0, 0, 1, 1, 1 ) | 228 | #define MPP30_TDM_PCLK MPP( 30, 0x2, 0, 0, 0, 0, 1, 1, 1 ) |
229 | #define MPP30_GE1_RXCTL MPP( 30, 0x3, 0, 0, 0, 1, 1, 1, 1 ) | 229 | #define MPP30_GE1_RXCTL MPP( 30, 0x3, 0, 0, 0, 1, 1, 1, 1 ) |
230 | #define MPP30_LCD_D10 MPP( 30, 0xb, 0, 0, 0, 0, 0, 0, 1 ) | 230 | #define MPP30_LCD_D10 MPP( 30, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
231 | 231 | ||
232 | #define MPP31_GPIO MPP( 31, 0x0, 1, 1, 0, 1, 1, 1, 1 ) | 232 | #define MPP31_GPIO MPP( 31, 0x0, 1, 1, 0, 1, 1, 1, 1 ) |
233 | #define MPP31_TSMP11 MPP( 31, 0x1, 1, 1, 0, 0, 1, 1, 1 ) | 233 | #define MPP31_TSMP11 MPP( 31, 0x1, 0, 0, 0, 0, 1, 1, 1 ) |
234 | #define MPP31_TDM_FS MPP( 31, 0x2, 1, 1, 0, 0, 1, 1, 1 ) | 234 | #define MPP31_TDM_FS MPP( 31, 0x2, 0, 0, 0, 0, 1, 1, 1 ) |
235 | #define MPP31_GE1_RXCLK MPP( 31, 0x3, 0, 0, 0, 1, 1, 1, 1 ) | 235 | #define MPP31_GE1_RXCLK MPP( 31, 0x3, 0, 0, 0, 1, 1, 1, 1 ) |
236 | #define MPP31_LCD_D11 MPP( 31, 0xb, 0, 0, 0, 0, 0, 0, 1 ) | 236 | #define MPP31_LCD_D11 MPP( 31, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
237 | 237 | ||
238 | #define MPP32_GPIO MPP( 32, 0x0, 1, 1, 0, 1, 1, 1, 1 ) | 238 | #define MPP32_GPIO MPP( 32, 0x0, 1, 1, 0, 1, 1, 1, 1 ) |
239 | #define MPP32_TSMP12 MPP( 32, 0x1, 1, 1, 0, 0, 1, 1, 1 ) | 239 | #define MPP32_TSMP12 MPP( 32, 0x1, 0, 0, 0, 0, 1, 1, 1 ) |
240 | #define MPP32_TDM_DRX MPP( 32, 0x2, 1, 0, 0, 0, 1, 1, 1 ) | 240 | #define MPP32_TDM_DRX MPP( 32, 0x2, 0, 0, 0, 0, 1, 1, 1 ) |
241 | #define MPP32_GE1_TCLKOUT MPP( 32, 0x3, 0, 0, 0, 1, 1, 1, 1 ) | 241 | #define MPP32_GE1_TCLKOUT MPP( 32, 0x3, 0, 0, 0, 1, 1, 1, 1 ) |
242 | #define MPP32_LCD_D12 MPP( 32, 0xb, 0, 0, 0, 0, 0, 0, 1 ) | 242 | #define MPP32_LCD_D12 MPP( 32, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
243 | 243 | ||
244 | #define MPP33_GPO MPP( 33, 0x0, 0, 1, 0, 1, 1, 1, 1 ) | 244 | #define MPP33_GPO MPP( 33, 0x0, 0, 1, 0, 1, 1, 1, 1 ) |
245 | #define MPP33_TDM_DTX MPP( 33, 0x2, 0, 1, 0, 0, 1, 1, 1 ) | 245 | #define MPP33_TDM_DTX MPP( 33, 0x2, 0, 0, 0, 0, 1, 1, 1 ) |
246 | #define MPP33_GE1_TXCTL MPP( 33, 0x3, 0, 0, 0, 1, 1, 1, 1 ) | 246 | #define MPP33_GE1_TXCTL MPP( 33, 0x3, 0, 0, 0, 1, 1, 1, 1 ) |
247 | #define MPP33_LCD_D13 MPP( 33, 0xb, 0, 0, 0, 0, 0, 0, 1 ) | 247 | #define MPP33_LCD_D13 MPP( 33, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
248 | 248 | ||
249 | #define MPP34_GPIO MPP( 34, 0x0, 1, 1, 0, 1, 1, 1, 1 ) | 249 | #define MPP34_GPIO MPP( 34, 0x0, 1, 1, 0, 1, 1, 1, 1 ) |
250 | #define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 1, 0, 0, 1, 1, 1 ) | 250 | #define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 0, 0, 0, 1, 1, 1 ) |
251 | #define MPP34_GE1_TXEN MPP( 34, 0x3, 0, 0, 0, 1, 1, 1, 1 ) | 251 | #define MPP34_GE1_TXEN MPP( 34, 0x3, 0, 0, 0, 1, 1, 1, 1 ) |
252 | #define MPP34_SATA1_ACTn MPP( 34, 0x5, 0, 1, 0, 0, 0, 1, 1 ) | 252 | #define MPP34_SATA1_ACTn MPP( 34, 0x5, 0, 0, 0, 0, 0, 1, 1 ) |
253 | #define MPP34_LCD_D14 MPP( 34, 0xb, 0, 0, 0, 0, 0, 0, 1 ) | 253 | #define MPP34_LCD_D14 MPP( 34, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
254 | 254 | ||
255 | #define MPP35_GPIO MPP( 35, 0x0, 1, 1, 1, 1, 1, 1, 1 ) | 255 | #define MPP35_GPIO MPP( 35, 0x0, 1, 1, 1, 1, 1, 1, 1 ) |
256 | #define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 1, 0, 0, 1, 1, 1 ) | 256 | #define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 0, 0, 0, 1, 1, 1 ) |
257 | #define MPP35_GE1_RXERR MPP( 35, 0x3, 0, 0, 0, 1, 1, 1, 1 ) | 257 | #define MPP35_GE1_RXERR MPP( 35, 0x3, 0, 0, 0, 1, 1, 1, 1 ) |
258 | #define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 1, 0, 1, 1, 1, 1 ) | 258 | #define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 0, 0, 1, 1, 1, 1 ) |
259 | #define MPP35_LCD_D15 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) | 259 | #define MPP35_LCD_D15 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
260 | #define MPP35_MII0_RXERR MPP( 35, 0xc, 1, 0, 1, 1, 1, 1, 1 ) | 260 | #define MPP35_MII0_RXERR MPP( 35, 0xc, 0, 0, 1, 1, 1, 1, 1 ) |
261 | 261 | ||
262 | #define MPP36_GPIO MPP( 36, 0x0, 1, 1, 1, 0, 0, 1, 1 ) | 262 | #define MPP36_GPIO MPP( 36, 0x0, 1, 1, 1, 0, 0, 1, 1 ) |
263 | #define MPP36_TSMP0 MPP( 36, 0x1, 1, 1, 0, 0, 0, 1, 1 ) | 263 | #define MPP36_TSMP0 MPP( 36, 0x1, 0, 0, 0, 0, 0, 1, 1 ) |
264 | #define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 1, 0, 0, 0, 1, 1 ) | 264 | #define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 0, 0, 0, 0, 1, 1 ) |
265 | #define MPP36_AU_SPDIFI MPP( 36, 0x4, 1, 0, 1, 0, 0, 1, 1 ) | 265 | #define MPP36_AU_SPDIFI MPP( 36, 0x4, 0, 0, 1, 0, 0, 1, 1 ) |
266 | #define MPP36_TW1_SDA MPP( 36, 0xb, 1, 1, 0, 0, 0, 0, 1 ) | 266 | #define MPP36_TW1_SDA MPP( 36, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
267 | 267 | ||
268 | #define MPP37_GPIO MPP( 37, 0x0, 1, 1, 1, 0, 0, 1, 1 ) | 268 | #define MPP37_GPIO MPP( 37, 0x0, 1, 1, 1, 0, 0, 1, 1 ) |
269 | #define MPP37_TSMP1 MPP( 37, 0x1, 1, 1, 0, 0, 0, 1, 1 ) | 269 | #define MPP37_TSMP1 MPP( 37, 0x1, 0, 0, 0, 0, 0, 1, 1 ) |
270 | #define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 1, 0, 0, 0, 1, 1 ) | 270 | #define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 0, 0, 0, 0, 1, 1 ) |
271 | #define MPP37_AU_SPDIFO MPP( 37, 0x4, 0, 1, 1, 0, 0, 1, 1 ) | 271 | #define MPP37_AU_SPDIFO MPP( 37, 0x4, 0, 0, 1, 0, 0, 1, 1 ) |
272 | #define MPP37_TW1_SCK MPP( 37, 0xb, 1, 1, 0, 0, 0, 0, 1 ) | 272 | #define MPP37_TW1_SCK MPP( 37, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
273 | 273 | ||
274 | #define MPP38_GPIO MPP( 38, 0x0, 1, 1, 1, 0, 0, 1, 1 ) | 274 | #define MPP38_GPIO MPP( 38, 0x0, 1, 1, 1, 0, 0, 1, 1 ) |
275 | #define MPP38_TSMP2 MPP( 38, 0x1, 1, 1, 0, 0, 0, 1, 1 ) | 275 | #define MPP38_TSMP2 MPP( 38, 0x1, 0, 0, 0, 0, 0, 1, 1 ) |
276 | #define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 1, 0, 0, 0, 1, 1 ) | 276 | #define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 0, 0, 0, 0, 1, 1 ) |
277 | #define MPP38_AU_SPDIFRMLCLK MPP( 38, 0x4, 0, 1, 1, 0, 0, 1, 1 ) | 277 | #define MPP38_AU_SPDIFRMLCLK MPP( 38, 0x4, 0, 0, 1, 0, 0, 1, 1 ) |
278 | #define MPP38_LCD_D18 MPP( 38, 0xb, 0, 0, 0, 0, 0, 0, 1 ) | 278 | #define MPP38_LCD_D18 MPP( 38, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
279 | 279 | ||
280 | #define MPP39_GPIO MPP( 39, 0x0, 1, 1, 1, 0, 0, 1, 1 ) | 280 | #define MPP39_GPIO MPP( 39, 0x0, 1, 1, 1, 0, 0, 1, 1 ) |
281 | #define MPP39_TSMP3 MPP( 39, 0x1, 1, 1, 0, 0, 0, 1, 1 ) | 281 | #define MPP39_TSMP3 MPP( 39, 0x1, 0, 0, 0, 0, 0, 1, 1 ) |
282 | #define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 1, 0, 0, 0, 1, 1 ) | 282 | #define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 0, 0, 0, 0, 1, 1 ) |
283 | #define MPP39_AU_I2SBCLK MPP( 39, 0x4, 0, 1, 1, 0, 0, 1, 1 ) | 283 | #define MPP39_AU_I2SBCLK MPP( 39, 0x4, 0, 0, 1, 0, 0, 1, 1 ) |
284 | #define MPP39_LCD_D19 MPP( 39, 0xb, 0, 0, 0, 0, 0, 0, 1 ) | 284 | #define MPP39_LCD_D19 MPP( 39, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
285 | 285 | ||
286 | #define MPP40_GPIO MPP( 40, 0x0, 1, 1, 1, 0, 0, 1, 1 ) | 286 | #define MPP40_GPIO MPP( 40, 0x0, 1, 1, 1, 0, 0, 1, 1 ) |
287 | #define MPP40_TSMP4 MPP( 40, 0x1, 1, 1, 0, 0, 0, 1, 1 ) | 287 | #define MPP40_TSMP4 MPP( 40, 0x1, 0, 0, 0, 0, 0, 1, 1 ) |
288 | #define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 1, 0, 0, 0, 1, 1 ) | 288 | #define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 0, 0, 0, 0, 1, 1 ) |
289 | #define MPP40_AU_I2SDO MPP( 40, 0x4, 0, 1, 1, 0, 0, 1, 1 ) | 289 | #define MPP40_AU_I2SDO MPP( 40, 0x4, 0, 0, 1, 0, 0, 1, 1 ) |
290 | #define MPP40_LCD_D20 MPP( 40, 0xb, 0, 0, 0, 0, 0, 0, 1 ) | 290 | #define MPP40_LCD_D20 MPP( 40, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
291 | 291 | ||
292 | #define MPP41_GPIO MPP( 41, 0x0, 1, 1, 1, 0, 0, 1, 1 ) | 292 | #define MPP41_GPIO MPP( 41, 0x0, 1, 1, 1, 0, 0, 1, 1 ) |
293 | #define MPP41_TSMP5 MPP( 41, 0x1, 1, 1, 0, 0, 0, 1, 1 ) | 293 | #define MPP41_TSMP5 MPP( 41, 0x1, 0, 0, 0, 0, 0, 1, 1 ) |
294 | #define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 1, 0, 0, 0, 0, 1, 1 ) | 294 | #define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 0, 0, 0, 0, 0, 1, 1 ) |
295 | #define MPP41_AU_I2SLRCLK MPP( 41, 0x4, 0, 1, 1, 0, 0, 1, 1 ) | 295 | #define MPP41_AU_I2SLRCLK MPP( 41, 0x4, 0, 0, 1, 0, 0, 1, 1 ) |
296 | #define MPP41_LCD_D21 MPP( 41, 0xb, 0, 0, 0, 0, 0, 0, 1 ) | 296 | #define MPP41_LCD_D21 MPP( 41, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
297 | 297 | ||
298 | #define MPP42_GPIO MPP( 42, 0x0, 1, 1, 1, 0, 0, 1, 1 ) | 298 | #define MPP42_GPIO MPP( 42, 0x0, 1, 1, 1, 0, 0, 1, 1 ) |
299 | #define MPP42_TSMP6 MPP( 42, 0x1, 1, 1, 0, 0, 0, 1, 1 ) | 299 | #define MPP42_TSMP6 MPP( 42, 0x1, 0, 0, 0, 0, 0, 1, 1 ) |
300 | #define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 1, 0, 0, 0, 1, 1 ) | 300 | #define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 0, 0, 0, 0, 1, 1 ) |
301 | #define MPP42_AU_I2SMCLK MPP( 42, 0x4, 0, 1, 1, 0, 0, 1, 1 ) | 301 | #define MPP42_AU_I2SMCLK MPP( 42, 0x4, 0, 0, 1, 0, 0, 1, 1 ) |
302 | #define MPP42_LCD_D22 MPP( 42, 0xb, 0, 0, 0, 0, 0, 0, 1 ) | 302 | #define MPP42_LCD_D22 MPP( 42, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
303 | 303 | ||
304 | #define MPP43_GPIO MPP( 43, 0x0, 1, 1, 1, 0, 0, 1, 1 ) | 304 | #define MPP43_GPIO MPP( 43, 0x0, 1, 1, 1, 0, 0, 1, 1 ) |
305 | #define MPP43_TSMP7 MPP( 43, 0x1, 1, 1, 0, 0, 0, 1, 1 ) | 305 | #define MPP43_TSMP7 MPP( 43, 0x1, 0, 0, 0, 0, 0, 1, 1 ) |
306 | #define MPP43_TDM_CODEC_INTn MPP( 43, 0x2, 0, 0, 0, 0, 0, 1, 1 ) | 306 | #define MPP43_TDM_CODEC_INTn MPP( 43, 0x2, 0, 0, 0, 0, 0, 1, 1 ) |
307 | #define MPP43_AU_I2SDI MPP( 43, 0x4, 1, 0, 1, 0, 0, 1, 1 ) | 307 | #define MPP43_AU_I2SDI MPP( 43, 0x4, 0, 0, 1, 0, 0, 1, 1 ) |
308 | #define MPP43_LCD_D23 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) | 308 | #define MPP43_LCD_D23 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
309 | 309 | ||
310 | #define MPP44_GPIO MPP( 44, 0x0, 1, 1, 1, 0, 0, 1, 1 ) | 310 | #define MPP44_GPIO MPP( 44, 0x0, 1, 1, 1, 0, 0, 1, 1 ) |
311 | #define MPP44_TSMP8 MPP( 44, 0x1, 1, 1, 0, 0, 0, 1, 1 ) | 311 | #define MPP44_TSMP8 MPP( 44, 0x1, 0, 0, 0, 0, 0, 1, 1 ) |
312 | #define MPP44_TDM_CODEC_RSTn MPP( 44, 0x2, 0, 0, 0, 0, 0, 1, 1 ) | 312 | #define MPP44_TDM_CODEC_RSTn MPP( 44, 0x2, 0, 0, 0, 0, 0, 1, 1 ) |
313 | #define MPP44_AU_EXTCLK MPP( 44, 0x4, 1, 0, 1, 0, 0, 1, 1 ) | 313 | #define MPP44_AU_EXTCLK MPP( 44, 0x4, 0, 0, 1, 0, 0, 1, 1 ) |
314 | #define MPP44_LCD_CLK MPP( 44, 0xb, 0, 0, 0, 0, 0, 0, 1 ) | 314 | #define MPP44_LCD_CLK MPP( 44, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
315 | 315 | ||
316 | #define MPP45_GPIO MPP( 45, 0x0, 1, 1, 0, 0, 0, 1, 1 ) | 316 | #define MPP45_GPIO MPP( 45, 0x0, 1, 1, 0, 0, 0, 1, 1 ) |
317 | #define MPP45_TSMP9 MPP( 45, 0x1, 1, 1, 0, 0, 0, 1, 1 ) | 317 | #define MPP45_TSMP9 MPP( 45, 0x1, 0, 0, 0, 0, 0, 1, 1 ) |
318 | #define MPP45_TDM_PCLK MPP( 45, 0x2, 1, 1, 0, 0, 0, 1, 1 ) | 318 | #define MPP45_TDM_PCLK MPP( 45, 0x2, 0, 0, 0, 0, 0, 1, 1 ) |
319 | #define MPP245_LCD_E MPP( 45, 0xb, 0, 0, 0, 0, 0, 0, 1 ) | 319 | #define MPP245_LCD_E MPP( 45, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
320 | 320 | ||
321 | #define MPP46_GPIO MPP( 46, 0x0, 1, 1, 0, 0, 0, 1, 1 ) | 321 | #define MPP46_GPIO MPP( 46, 0x0, 1, 1, 0, 0, 0, 1, 1 ) |
322 | #define MPP46_TSMP10 MPP( 46, 0x1, 1, 1, 0, 0, 0, 1, 1 ) | 322 | #define MPP46_TSMP10 MPP( 46, 0x1, 0, 0, 0, 0, 0, 1, 1 ) |
323 | #define MPP46_TDM_FS MPP( 46, 0x2, 1, 1, 0, 0, 0, 1, 1 ) | 323 | #define MPP46_TDM_FS MPP( 46, 0x2, 0, 0, 0, 0, 0, 1, 1 ) |
324 | #define MPP46_LCD_HSYNC MPP( 46, 0xb, 0, 0, 0, 0, 0, 0, 1 ) | 324 | #define MPP46_LCD_HSYNC MPP( 46, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
325 | 325 | ||
326 | #define MPP47_GPIO MPP( 47, 0x0, 1, 1, 0, 0, 0, 1, 1 ) | 326 | #define MPP47_GPIO MPP( 47, 0x0, 1, 1, 0, 0, 0, 1, 1 ) |
327 | #define MPP47_TSMP11 MPP( 47, 0x1, 1, 1, 0, 0, 0, 1, 1 ) | 327 | #define MPP47_TSMP11 MPP( 47, 0x1, 0, 0, 0, 0, 0, 1, 1 ) |
328 | #define MPP47_TDM_DRX MPP( 47, 0x2, 1, 0, 0, 0, 0, 1, 1 ) | 328 | #define MPP47_TDM_DRX MPP( 47, 0x2, 0, 0, 0, 0, 0, 1, 1 ) |
329 | #define MPP47_LCD_VSYNC MPP( 47, 0xb, 0, 0, 0, 0, 0, 0, 1 ) | 329 | #define MPP47_LCD_VSYNC MPP( 47, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
330 | 330 | ||
331 | #define MPP48_GPIO MPP( 48, 0x0, 1, 1, 0, 0, 0, 1, 1 ) | 331 | #define MPP48_GPIO MPP( 48, 0x0, 1, 1, 0, 0, 0, 1, 1 ) |
332 | #define MPP48_TSMP12 MPP( 48, 0x1, 1, 1, 0, 0, 0, 1, 1 ) | 332 | #define MPP48_TSMP12 MPP( 48, 0x1, 0, 0, 0, 0, 0, 1, 1 ) |
333 | #define MPP48_TDM_DTX MPP( 48, 0x2, 0, 1, 0, 0, 0, 1, 1 ) | 333 | #define MPP48_TDM_DTX MPP( 48, 0x2, 0, 0, 0, 0, 0, 1, 1 ) |
334 | #define MPP48_LCD_D16 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) | 334 | #define MPP48_LCD_D16 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
335 | 335 | ||
336 | #define MPP49_GPIO MPP( 49, 0x0, 1, 1, 0, 0, 0, 1, 0 ) | 336 | #define MPP49_GPIO MPP( 49, 0x0, 1, 1, 0, 0, 0, 1, 0 ) |
337 | #define MPP49_GPO MPP( 49, 0x0, 0, 1, 0, 0, 0, 0, 1 ) | 337 | #define MPP49_GPO MPP( 49, 0x0, 0, 1, 0, 0, 0, 0, 1 ) |
338 | #define MPP49_TSMP9 MPP( 49, 0x1, 1, 1, 0, 0, 0, 1, 0 ) | 338 | #define MPP49_TSMP9 MPP( 49, 0x1, 0, 0, 0, 0, 0, 1, 0 ) |
339 | #define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 1, 0, 0, 0, 1, 1 ) | 339 | #define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 0, 0, 0, 0, 1, 1 ) |
340 | #define MPP49_PTP_CLK MPP( 49, 0x5, 1, 0, 0, 0, 0, 1, 0 ) | 340 | #define MPP49_PTP_CLK MPP( 49, 0x5, 0, 0, 0, 0, 0, 1, 0 ) |
341 | #define MPP49_PEX0_CLKREQ MPP( 49, 0xa, 0, 1, 0, 0, 0, 0, 1 ) | 341 | #define MPP49_PEX0_CLKREQ MPP( 49, 0xa, 0, 0, 0, 0, 0, 0, 1 ) |
342 | #define MPP49_LCD_D17 MPP( 49, 0xb, 0, 0, 0, 0, 0, 0, 1 ) | 342 | #define MPP49_LCD_D17 MPP( 49, 0xb, 0, 0, 0, 0, 0, 0, 1 ) |
343 | 343 | ||
344 | #define MPP_MAX 49 | 344 | #define MPP_MAX 49 |
diff --git a/arch/arm/mach-lpc32xx/include/mach/irqs.h b/arch/arm/mach-lpc32xx/include/mach/irqs.h index 2667f52e3b04..9e3b90df32e1 100644 --- a/arch/arm/mach-lpc32xx/include/mach/irqs.h +++ b/arch/arm/mach-lpc32xx/include/mach/irqs.h | |||
@@ -61,7 +61,7 @@ | |||
61 | */ | 61 | */ |
62 | #define IRQ_LPC32XX_JTAG_COMM_TX LPC32XX_SIC1_IRQ(1) | 62 | #define IRQ_LPC32XX_JTAG_COMM_TX LPC32XX_SIC1_IRQ(1) |
63 | #define IRQ_LPC32XX_JTAG_COMM_RX LPC32XX_SIC1_IRQ(2) | 63 | #define IRQ_LPC32XX_JTAG_COMM_RX LPC32XX_SIC1_IRQ(2) |
64 | #define IRQ_LPC32XX_GPI_11 LPC32XX_SIC1_IRQ(4) | 64 | #define IRQ_LPC32XX_GPI_28 LPC32XX_SIC1_IRQ(4) |
65 | #define IRQ_LPC32XX_TS_P LPC32XX_SIC1_IRQ(6) | 65 | #define IRQ_LPC32XX_TS_P LPC32XX_SIC1_IRQ(6) |
66 | #define IRQ_LPC32XX_TS_IRQ LPC32XX_SIC1_IRQ(7) | 66 | #define IRQ_LPC32XX_TS_IRQ LPC32XX_SIC1_IRQ(7) |
67 | #define IRQ_LPC32XX_TS_AUX LPC32XX_SIC1_IRQ(8) | 67 | #define IRQ_LPC32XX_TS_AUX LPC32XX_SIC1_IRQ(8) |
diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c index 4eae566dfdc7..c74de01ab5b6 100644 --- a/arch/arm/mach-lpc32xx/irq.c +++ b/arch/arm/mach-lpc32xx/irq.c | |||
@@ -118,6 +118,10 @@ static const struct lpc32xx_event_info lpc32xx_events[NR_IRQS] = { | |||
118 | .event_group = &lpc32xx_event_pin_regs, | 118 | .event_group = &lpc32xx_event_pin_regs, |
119 | .mask = LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT, | 119 | .mask = LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT, |
120 | }, | 120 | }, |
121 | [IRQ_LPC32XX_GPI_28] = { | ||
122 | .event_group = &lpc32xx_event_pin_regs, | ||
123 | .mask = LPC32XX_CLKPWR_EXTSRC_GPI_28_BIT, | ||
124 | }, | ||
121 | [IRQ_LPC32XX_GPIO_00] = { | 125 | [IRQ_LPC32XX_GPIO_00] = { |
122 | .event_group = &lpc32xx_event_int_regs, | 126 | .event_group = &lpc32xx_event_int_regs, |
123 | .mask = LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT, | 127 | .mask = LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT, |
@@ -305,9 +309,18 @@ static int lpc32xx_irq_wake(struct irq_data *d, unsigned int state) | |||
305 | 309 | ||
306 | if (state) | 310 | if (state) |
307 | eventreg |= lpc32xx_events[d->irq].mask; | 311 | eventreg |= lpc32xx_events[d->irq].mask; |
308 | else | 312 | else { |
309 | eventreg &= ~lpc32xx_events[d->irq].mask; | 313 | eventreg &= ~lpc32xx_events[d->irq].mask; |
310 | 314 | ||
315 | /* | ||
316 | * When disabling the wakeup, clear the latched | ||
317 | * event | ||
318 | */ | ||
319 | __raw_writel(lpc32xx_events[d->irq].mask, | ||
320 | lpc32xx_events[d->irq]. | ||
321 | event_group->rawstat_reg); | ||
322 | } | ||
323 | |||
311 | __raw_writel(eventreg, | 324 | __raw_writel(eventreg, |
312 | lpc32xx_events[d->irq].event_group->enab_reg); | 325 | lpc32xx_events[d->irq].event_group->enab_reg); |
313 | 326 | ||
@@ -380,13 +393,15 @@ void __init lpc32xx_init_irq(void) | |||
380 | 393 | ||
381 | /* Setup SIC1 */ | 394 | /* Setup SIC1 */ |
382 | __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE)); | 395 | __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE)); |
383 | __raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE)); | 396 | __raw_writel(SIC1_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE)); |
384 | __raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE)); | 397 | __raw_writel(SIC1_ATR_DEFAULT, |
398 | LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE)); | ||
385 | 399 | ||
386 | /* Setup SIC2 */ | 400 | /* Setup SIC2 */ |
387 | __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE)); | 401 | __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE)); |
388 | __raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE)); | 402 | __raw_writel(SIC2_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE)); |
389 | __raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE)); | 403 | __raw_writel(SIC2_ATR_DEFAULT, |
404 | LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE)); | ||
390 | 405 | ||
391 | /* Configure supported IRQ's */ | 406 | /* Configure supported IRQ's */ |
392 | for (i = 0; i < NR_IRQS; i++) { | 407 | for (i = 0; i < NR_IRQS; i++) { |
diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c index 429cfdbb2b3d..f2735281616a 100644 --- a/arch/arm/mach-lpc32xx/serial.c +++ b/arch/arm/mach-lpc32xx/serial.c | |||
@@ -88,6 +88,7 @@ struct uartinit { | |||
88 | char *uart_ck_name; | 88 | char *uart_ck_name; |
89 | u32 ck_mode_mask; | 89 | u32 ck_mode_mask; |
90 | void __iomem *pdiv_clk_reg; | 90 | void __iomem *pdiv_clk_reg; |
91 | resource_size_t mapbase; | ||
91 | }; | 92 | }; |
92 | 93 | ||
93 | static struct uartinit uartinit_data[] __initdata = { | 94 | static struct uartinit uartinit_data[] __initdata = { |
@@ -97,6 +98,7 @@ static struct uartinit uartinit_data[] __initdata = { | |||
97 | .ck_mode_mask = | 98 | .ck_mode_mask = |
98 | LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 5), | 99 | LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 5), |
99 | .pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL, | 100 | .pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL, |
101 | .mapbase = LPC32XX_UART5_BASE, | ||
100 | }, | 102 | }, |
101 | #endif | 103 | #endif |
102 | #ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT | 104 | #ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT |
@@ -105,6 +107,7 @@ static struct uartinit uartinit_data[] __initdata = { | |||
105 | .ck_mode_mask = | 107 | .ck_mode_mask = |
106 | LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 3), | 108 | LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 3), |
107 | .pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL, | 109 | .pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL, |
110 | .mapbase = LPC32XX_UART3_BASE, | ||
108 | }, | 111 | }, |
109 | #endif | 112 | #endif |
110 | #ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT | 113 | #ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT |
@@ -113,6 +116,7 @@ static struct uartinit uartinit_data[] __initdata = { | |||
113 | .ck_mode_mask = | 116 | .ck_mode_mask = |
114 | LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 4), | 117 | LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 4), |
115 | .pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL, | 118 | .pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL, |
119 | .mapbase = LPC32XX_UART4_BASE, | ||
116 | }, | 120 | }, |
117 | #endif | 121 | #endif |
118 | #ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT | 122 | #ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT |
@@ -121,6 +125,7 @@ static struct uartinit uartinit_data[] __initdata = { | |||
121 | .ck_mode_mask = | 125 | .ck_mode_mask = |
122 | LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 6), | 126 | LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 6), |
123 | .pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL, | 127 | .pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL, |
128 | .mapbase = LPC32XX_UART6_BASE, | ||
124 | }, | 129 | }, |
125 | #endif | 130 | #endif |
126 | }; | 131 | }; |
@@ -165,11 +170,24 @@ void __init lpc32xx_serial_init(void) | |||
165 | 170 | ||
166 | /* pre-UART clock divider set to 1 */ | 171 | /* pre-UART clock divider set to 1 */ |
167 | __raw_writel(0x0101, uartinit_data[i].pdiv_clk_reg); | 172 | __raw_writel(0x0101, uartinit_data[i].pdiv_clk_reg); |
173 | |||
174 | /* | ||
175 | * Force a flush of the RX FIFOs to work around a | ||
176 | * HW bug | ||
177 | */ | ||
178 | puart = uartinit_data[i].mapbase; | ||
179 | __raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart)); | ||
180 | __raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart)); | ||
181 | j = LPC32XX_SUART_FIFO_SIZE; | ||
182 | while (j--) | ||
183 | tmp = __raw_readl( | ||
184 | LPC32XX_UART_DLL_FIFO(puart)); | ||
185 | __raw_writel(0, LPC32XX_UART_IIR_FCR(puart)); | ||
168 | } | 186 | } |
169 | 187 | ||
170 | /* This needs to be done after all UART clocks are setup */ | 188 | /* This needs to be done after all UART clocks are setup */ |
171 | __raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE); | 189 | __raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE); |
172 | for (i = 0; i < ARRAY_SIZE(uartinit_data) - 1; i++) { | 190 | for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) { |
173 | /* Force a flush of the RX FIFOs to work around a HW bug */ | 191 | /* Force a flush of the RX FIFOs to work around a HW bug */ |
174 | puart = serial_std_platform_data[i].mapbase; | 192 | puart = serial_std_platform_data[i].mapbase; |
175 | __raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart)); | 193 | __raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart)); |
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index 17cb76060125..3588a5584153 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c | |||
@@ -17,7 +17,6 @@ | |||
17 | #include <linux/mtd/partitions.h> | 17 | #include <linux/mtd/partitions.h> |
18 | #include <linux/mtd/nand.h> | 18 | #include <linux/mtd/nand.h> |
19 | #include <linux/interrupt.h> | 19 | #include <linux/interrupt.h> |
20 | #include <linux/gpio.h> | ||
21 | 20 | ||
22 | #include <asm/mach-types.h> | 21 | #include <asm/mach-types.h> |
23 | #include <asm/mach/arch.h> | 22 | #include <asm/mach/arch.h> |
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 7bc17eaa12eb..ada1213982b4 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c | |||
@@ -24,7 +24,6 @@ | |||
24 | #include <mach/dma.h> | 24 | #include <mach/dma.h> |
25 | #include <mach/devices.h> | 25 | #include <mach/devices.h> |
26 | #include <mach/mfp.h> | 26 | #include <mach/mfp.h> |
27 | #include <linux/platform_device.h> | ||
28 | #include <linux/dma-mapping.h> | 27 | #include <linux/dma-mapping.h> |
29 | #include <mach/pxa168.h> | 28 | #include <mach/pxa168.h> |
30 | 29 | ||
diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c index 8e3b5af04a57..bc97170125bf 100644 --- a/arch/arm/mach-mmp/tavorevb.c +++ b/arch/arm/mach-mmp/tavorevb.c | |||
@@ -12,7 +12,6 @@ | |||
12 | #include <linux/kernel.h> | 12 | #include <linux/kernel.h> |
13 | #include <linux/platform_device.h> | 13 | #include <linux/platform_device.h> |
14 | #include <linux/smc91x.h> | 14 | #include <linux/smc91x.h> |
15 | #include <linux/gpio.h> | ||
16 | 15 | ||
17 | #include <asm/mach-types.h> | 16 | #include <asm/mach-types.h> |
18 | #include <asm/mach/arch.h> | 17 | #include <asm/mach/arch.h> |
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 0cdd41004ad0..a5dcf766a3f9 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c | |||
@@ -19,6 +19,7 @@ | |||
19 | #include <mach/mv78xx0.h> | 19 | #include <mach/mv78xx0.h> |
20 | #include <mach/bridge-regs.h> | 20 | #include <mach/bridge-regs.h> |
21 | #include <plat/cache-feroceon-l2.h> | 21 | #include <plat/cache-feroceon-l2.h> |
22 | #include <plat/ehci-orion.h> | ||
22 | #include <plat/orion_nand.h> | 23 | #include <plat/orion_nand.h> |
23 | #include <plat/time.h> | 24 | #include <plat/time.h> |
24 | #include <plat/common.h> | 25 | #include <plat/common.h> |
@@ -169,7 +170,7 @@ void __init mv78xx0_map_io(void) | |||
169 | ****************************************************************************/ | 170 | ****************************************************************************/ |
170 | void __init mv78xx0_ehci0_init(void) | 171 | void __init mv78xx0_ehci0_init(void) |
171 | { | 172 | { |
172 | orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0); | 173 | orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0, EHCI_PHY_NA); |
173 | } | 174 | } |
174 | 175 | ||
175 | 176 | ||
diff --git a/arch/arm/mach-mv78xx0/mpp.h b/arch/arm/mach-mv78xx0/mpp.h index b61b50927123..3752302ae2ee 100644 --- a/arch/arm/mach-mv78xx0/mpp.h +++ b/arch/arm/mach-mv78xx0/mpp.h | |||
@@ -24,296 +24,296 @@ | |||
24 | #define MPP_78100_A0_MASK MPP(0, 0x0, 0, 0, 1) | 24 | #define MPP_78100_A0_MASK MPP(0, 0x0, 0, 0, 1) |
25 | 25 | ||
26 | #define MPP0_GPIO MPP(0, 0x0, 1, 1, 1) | 26 | #define MPP0_GPIO MPP(0, 0x0, 1, 1, 1) |
27 | #define MPP0_GE0_COL MPP(0, 0x1, 1, 0, 1) | 27 | #define MPP0_GE0_COL MPP(0, 0x1, 0, 0, 1) |
28 | #define MPP0_GE1_TXCLK MPP(0, 0x2, 0, 1, 1) | 28 | #define MPP0_GE1_TXCLK MPP(0, 0x2, 0, 0, 1) |
29 | #define MPP0_UNUSED MPP(0, 0x3, 0, 0, 1) | 29 | #define MPP0_UNUSED MPP(0, 0x3, 0, 0, 1) |
30 | 30 | ||
31 | #define MPP1_GPIO MPP(1, 0x0, 1, 1, 1) | 31 | #define MPP1_GPIO MPP(1, 0x0, 1, 1, 1) |
32 | #define MPP1_GE0_RXERR MPP(1, 0x1, 1, 0, 1) | 32 | #define MPP1_GE0_RXERR MPP(1, 0x1, 0, 0, 1) |
33 | #define MPP1_GE1_TXCTL MPP(1, 0x2, 0, 1, 1) | 33 | #define MPP1_GE1_TXCTL MPP(1, 0x2, 0, 0, 1) |
34 | #define MPP1_UNUSED MPP(1, 0x3, 0, 0, 1) | 34 | #define MPP1_UNUSED MPP(1, 0x3, 0, 0, 1) |
35 | 35 | ||
36 | #define MPP2_GPIO MPP(2, 0x0, 1, 1, 1) | 36 | #define MPP2_GPIO MPP(2, 0x0, 1, 1, 1) |
37 | #define MPP2_GE0_CRS MPP(2, 0x1, 1, 0, 1) | 37 | #define MPP2_GE0_CRS MPP(2, 0x1, 0, 0, 1) |
38 | #define MPP2_GE1_RXCTL MPP(2, 0x2, 1, 0, 1) | 38 | #define MPP2_GE1_RXCTL MPP(2, 0x2, 0, 0, 1) |
39 | #define MPP2_UNUSED MPP(2, 0x3, 0, 0, 1) | 39 | #define MPP2_UNUSED MPP(2, 0x3, 0, 0, 1) |
40 | 40 | ||
41 | #define MPP3_GPIO MPP(3, 0x0, 1, 1, 1) | 41 | #define MPP3_GPIO MPP(3, 0x0, 1, 1, 1) |
42 | #define MPP3_GE0_TXERR MPP(3, 0x1, 0, 1, 1) | 42 | #define MPP3_GE0_TXERR MPP(3, 0x1, 0, 0, 1) |
43 | #define MPP3_GE1_RXCLK MPP(3, 0x2, 1, 0, 1) | 43 | #define MPP3_GE1_RXCLK MPP(3, 0x2, 0, 0, 1) |
44 | #define MPP3_UNUSED MPP(3, 0x3, 0, 0, 1) | 44 | #define MPP3_UNUSED MPP(3, 0x3, 0, 0, 1) |
45 | 45 | ||
46 | #define MPP4_GPIO MPP(4, 0x0, 1, 1, 1) | 46 | #define MPP4_GPIO MPP(4, 0x0, 1, 1, 1) |
47 | #define MPP4_GE0_TXD4 MPP(4, 0x1, 0, 1, 1) | 47 | #define MPP4_GE0_TXD4 MPP(4, 0x1, 0, 0, 1) |
48 | #define MPP4_GE1_TXD0 MPP(4, 0x2, 0, 1, 1) | 48 | #define MPP4_GE1_TXD0 MPP(4, 0x2, 0, 0, 1) |
49 | #define MPP4_UNUSED MPP(4, 0x3, 0, 0, 1) | 49 | #define MPP4_UNUSED MPP(4, 0x3, 0, 0, 1) |
50 | 50 | ||
51 | #define MPP5_GPIO MPP(5, 0x0, 1, 1, 1) | 51 | #define MPP5_GPIO MPP(5, 0x0, 1, 1, 1) |
52 | #define MPP5_GE0_TXD5 MPP(5, 0x1, 0, 1, 1) | 52 | #define MPP5_GE0_TXD5 MPP(5, 0x1, 0, 0, 1) |
53 | #define MPP5_GE1_TXD1 MPP(5, 0x2, 0, 1, 1) | 53 | #define MPP5_GE1_TXD1 MPP(5, 0x2, 0, 0, 1) |
54 | #define MPP5_UNUSED MPP(5, 0x3, 0, 0, 1) | 54 | #define MPP5_UNUSED MPP(5, 0x3, 0, 0, 1) |
55 | 55 | ||
56 | #define MPP6_GPIO MPP(6, 0x0, 1, 1, 1) | 56 | #define MPP6_GPIO MPP(6, 0x0, 1, 1, 1) |
57 | #define MPP6_GE0_TXD6 MPP(6, 0x1, 0, 1, 1) | 57 | #define MPP6_GE0_TXD6 MPP(6, 0x1, 0, 0, 1) |
58 | #define MPP6_GE1_TXD2 MPP(6, 0x2, 0, 1, 1) | 58 | #define MPP6_GE1_TXD2 MPP(6, 0x2, 0, 0, 1) |
59 | #define MPP6_UNUSED MPP(6, 0x3, 0, 0, 1) | 59 | #define MPP6_UNUSED MPP(6, 0x3, 0, 0, 1) |
60 | 60 | ||
61 | #define MPP7_GPIO MPP(7, 0x0, 1, 1, 1) | 61 | #define MPP7_GPIO MPP(7, 0x0, 1, 1, 1) |
62 | #define MPP7_GE0_TXD7 MPP(7, 0x1, 0, 1, 1) | 62 | #define MPP7_GE0_TXD7 MPP(7, 0x1, 0, 0, 1) |
63 | #define MPP7_GE1_TXD3 MPP(7, 0x2, 0, 1, 1) | 63 | #define MPP7_GE1_TXD3 MPP(7, 0x2, 0, 0, 1) |
64 | #define MPP7_UNUSED MPP(7, 0x3, 0, 0, 1) | 64 | #define MPP7_UNUSED MPP(7, 0x3, 0, 0, 1) |
65 | 65 | ||
66 | #define MPP8_GPIO MPP(8, 0x0, 1, 1, 1) | 66 | #define MPP8_GPIO MPP(8, 0x0, 1, 1, 1) |
67 | #define MPP8_GE0_RXD4 MPP(8, 0x1, 1, 0, 1) | 67 | #define MPP8_GE0_RXD4 MPP(8, 0x1, 0, 0, 1) |
68 | #define MPP8_GE1_RXD0 MPP(8, 0x2, 1, 0, 1) | 68 | #define MPP8_GE1_RXD0 MPP(8, 0x2, 0, 0, 1) |
69 | #define MPP8_UNUSED MPP(8, 0x3, 0, 0, 1) | 69 | #define MPP8_UNUSED MPP(8, 0x3, 0, 0, 1) |
70 | 70 | ||
71 | #define MPP9_GPIO MPP(9, 0x0, 1, 1, 1) | 71 | #define MPP9_GPIO MPP(9, 0x0, 1, 1, 1) |
72 | #define MPP9_GE0_RXD5 MPP(9, 0x1, 1, 0, 1) | 72 | #define MPP9_GE0_RXD5 MPP(9, 0x1, 0, 0, 1) |
73 | #define MPP9_GE1_RXD1 MPP(9, 0x2, 1, 0, 1) | 73 | #define MPP9_GE1_RXD1 MPP(9, 0x2, 0, 0, 1) |
74 | #define MPP9_UNUSED MPP(9, 0x3, 0, 0, 1) | 74 | #define MPP9_UNUSED MPP(9, 0x3, 0, 0, 1) |
75 | 75 | ||
76 | #define MPP10_GPIO MPP(10, 0x0, 1, 1, 1) | 76 | #define MPP10_GPIO MPP(10, 0x0, 1, 1, 1) |
77 | #define MPP10_GE0_RXD6 MPP(10, 0x1, 1, 0, 1) | 77 | #define MPP10_GE0_RXD6 MPP(10, 0x1, 0, 0, 1) |
78 | #define MPP10_GE1_RXD2 MPP(10, 0x2, 1, 0, 1) | 78 | #define MPP10_GE1_RXD2 MPP(10, 0x2, 0, 0, 1) |
79 | #define MPP10_UNUSED MPP(10, 0x3, 0, 0, 1) | 79 | #define MPP10_UNUSED MPP(10, 0x3, 0, 0, 1) |
80 | 80 | ||
81 | #define MPP11_GPIO MPP(11, 0x0, 1, 1, 1) | 81 | #define MPP11_GPIO MPP(11, 0x0, 1, 1, 1) |
82 | #define MPP11_GE0_RXD7 MPP(11, 0x1, 1, 0, 1) | 82 | #define MPP11_GE0_RXD7 MPP(11, 0x1, 0, 0, 1) |
83 | #define MPP11_GE1_RXD3 MPP(11, 0x2, 1, 0, 1) | 83 | #define MPP11_GE1_RXD3 MPP(11, 0x2, 0, 0, 1) |
84 | #define MPP11_UNUSED MPP(11, 0x3, 0, 0, 1) | 84 | #define MPP11_UNUSED MPP(11, 0x3, 0, 0, 1) |
85 | 85 | ||
86 | #define MPP12_GPIO MPP(12, 0x0, 1, 1, 1) | 86 | #define MPP12_GPIO MPP(12, 0x0, 1, 1, 1) |
87 | #define MPP12_M_BB MPP(12, 0x3, 1, 0, 1) | 87 | #define MPP12_M_BB MPP(12, 0x3, 0, 0, 1) |
88 | #define MPP12_UA0_CTSn MPP(12, 0x4, 1, 0, 1) | 88 | #define MPP12_UA0_CTSn MPP(12, 0x4, 0, 0, 1) |
89 | #define MPP12_NAND_FLASH_REn0 MPP(12, 0x5, 0, 1, 1) | 89 | #define MPP12_NAND_FLASH_REn0 MPP(12, 0x5, 0, 0, 1) |
90 | #define MPP12_TDM0_SCSn MPP(12, 0X6, 0, 1, 1) | 90 | #define MPP12_TDM0_SCSn MPP(12, 0X6, 0, 0, 1) |
91 | #define MPP12_UNUSED MPP(12, 0x1, 0, 0, 1) | 91 | #define MPP12_UNUSED MPP(12, 0x1, 0, 0, 1) |
92 | 92 | ||
93 | #define MPP13_GPIO MPP(13, 0x0, 1, 1, 1) | 93 | #define MPP13_GPIO MPP(13, 0x0, 1, 1, 1) |
94 | #define MPP13_SYSRST_OUTn MPP(13, 0x3, 0, 1, 1) | 94 | #define MPP13_SYSRST_OUTn MPP(13, 0x3, 0, 0, 1) |
95 | #define MPP13_UA0_RTSn MPP(13, 0x4, 0, 1, 1) | 95 | #define MPP13_UA0_RTSn MPP(13, 0x4, 0, 0, 1) |
96 | #define MPP13_NAN_FLASH_WEn0 MPP(13, 0x5, 0, 1, 1) | 96 | #define MPP13_NAN_FLASH_WEn0 MPP(13, 0x5, 0, 0, 1) |
97 | #define MPP13_TDM_SCLK MPP(13, 0x6, 0, 1, 1) | 97 | #define MPP13_TDM_SCLK MPP(13, 0x6, 0, 0, 1) |
98 | #define MPP13_UNUSED MPP(13, 0x1, 0, 0, 1) | 98 | #define MPP13_UNUSED MPP(13, 0x1, 0, 0, 1) |
99 | 99 | ||
100 | #define MPP14_GPIO MPP(14, 0x0, 1, 1, 1) | 100 | #define MPP14_GPIO MPP(14, 0x0, 1, 1, 1) |
101 | #define MPP14_SATA1_ACTn MPP(14, 0x3, 0, 1, 1) | 101 | #define MPP14_SATA1_ACTn MPP(14, 0x3, 0, 0, 1) |
102 | #define MPP14_UA1_CTSn MPP(14, 0x4, 1, 0, 1) | 102 | #define MPP14_UA1_CTSn MPP(14, 0x4, 0, 0, 1) |
103 | #define MPP14_NAND_FLASH_REn1 MPP(14, 0x5, 0, 1, 1) | 103 | #define MPP14_NAND_FLASH_REn1 MPP(14, 0x5, 0, 0, 1) |
104 | #define MPP14_TDM_SMOSI MPP(14, 0x6, 0, 1, 1) | 104 | #define MPP14_TDM_SMOSI MPP(14, 0x6, 0, 0, 1) |
105 | #define MPP14_UNUSED MPP(14, 0x1, 0, 0, 1) | 105 | #define MPP14_UNUSED MPP(14, 0x1, 0, 0, 1) |
106 | 106 | ||
107 | #define MPP15_GPIO MPP(15, 0x0, 1, 1, 1) | 107 | #define MPP15_GPIO MPP(15, 0x0, 1, 1, 1) |
108 | #define MPP15_SATA0_ACTn MPP(15, 0x3, 0, 1, 1) | 108 | #define MPP15_SATA0_ACTn MPP(15, 0x3, 0, 0, 1) |
109 | #define MPP15_UA1_RTSn MPP(15, 0x4, 0, 1, 1) | 109 | #define MPP15_UA1_RTSn MPP(15, 0x4, 0, 0, 1) |
110 | #define MPP15_NAND_FLASH_WEn1 MPP(15, 0x5, 0, 1, 1) | 110 | #define MPP15_NAND_FLASH_WEn1 MPP(15, 0x5, 0, 0, 1) |
111 | #define MPP15_TDM_SMISO MPP(15, 0x6, 1, 0, 1) | 111 | #define MPP15_TDM_SMISO MPP(15, 0x6, 0, 0, 1) |
112 | #define MPP15_UNUSED MPP(15, 0x1, 0, 0, 1) | 112 | #define MPP15_UNUSED MPP(15, 0x1, 0, 0, 1) |
113 | 113 | ||
114 | #define MPP16_GPIO MPP(16, 0x0, 1, 1, 1) | 114 | #define MPP16_GPIO MPP(16, 0x0, 1, 1, 1) |
115 | #define MPP16_SATA1_PRESENTn MPP(16, 0x3, 0, 1, 1) | 115 | #define MPP16_SATA1_PRESENTn MPP(16, 0x3, 0, 0, 1) |
116 | #define MPP16_UA2_TXD MPP(16, 0x4, 0, 1, 1) | 116 | #define MPP16_UA2_TXD MPP(16, 0x4, 0, 0, 1) |
117 | #define MPP16_NAND_FLASH_REn3 MPP(16, 0x5, 0, 1, 1) | 117 | #define MPP16_NAND_FLASH_REn3 MPP(16, 0x5, 0, 0, 1) |
118 | #define MPP16_TDM_INTn MPP(16, 0x6, 1, 0, 1) | 118 | #define MPP16_TDM_INTn MPP(16, 0x6, 0, 0, 1) |
119 | #define MPP16_UNUSED MPP(16, 0x1, 0, 0, 1) | 119 | #define MPP16_UNUSED MPP(16, 0x1, 0, 0, 1) |
120 | 120 | ||
121 | 121 | ||
122 | #define MPP17_GPIO MPP(17, 0x0, 1, 1, 1) | 122 | #define MPP17_GPIO MPP(17, 0x0, 1, 1, 1) |
123 | #define MPP17_SATA0_PRESENTn MPP(17, 0x3, 0, 1, 1) | 123 | #define MPP17_SATA0_PRESENTn MPP(17, 0x3, 0, 0, 1) |
124 | #define MPP17_UA2_RXD MPP(17, 0x4, 1, 0, 1) | 124 | #define MPP17_UA2_RXD MPP(17, 0x4, 0, 0, 1) |
125 | #define MPP17_NAND_FLASH_WEn3 MPP(17, 0x5, 0, 1, 1) | 125 | #define MPP17_NAND_FLASH_WEn3 MPP(17, 0x5, 0, 0, 1) |
126 | #define MPP17_TDM_RSTn MPP(17, 0x6, 0, 1, 1) | 126 | #define MPP17_TDM_RSTn MPP(17, 0x6, 0, 0, 1) |
127 | #define MPP17_UNUSED MPP(17, 0x1, 0, 0, 1) | 127 | #define MPP17_UNUSED MPP(17, 0x1, 0, 0, 1) |
128 | 128 | ||
129 | 129 | ||
130 | #define MPP18_GPIO MPP(18, 0x0, 1, 1, 1) | 130 | #define MPP18_GPIO MPP(18, 0x0, 1, 1, 1) |
131 | #define MPP18_UA0_CTSn MPP(18, 0x4, 1, 0, 1) | 131 | #define MPP18_UA0_CTSn MPP(18, 0x4, 0, 0, 1) |
132 | #define MPP18_BOOT_FLASH_REn MPP(18, 0x5, 0, 1, 1) | 132 | #define MPP18_BOOT_FLASH_REn MPP(18, 0x5, 0, 0, 1) |
133 | #define MPP18_UNUSED MPP(18, 0x1, 0, 0, 1) | 133 | #define MPP18_UNUSED MPP(18, 0x1, 0, 0, 1) |
134 | 134 | ||
135 | 135 | ||
136 | 136 | ||
137 | #define MPP19_GPIO MPP(19, 0x0, 1, 1, 1) | 137 | #define MPP19_GPIO MPP(19, 0x0, 1, 1, 1) |
138 | #define MPP19_UA0_CTSn MPP(19, 0x4, 0, 1, 1) | 138 | #define MPP19_UA0_CTSn MPP(19, 0x4, 0, 0, 1) |
139 | #define MPP19_BOOT_FLASH_WEn MPP(19, 0x5, 0, 1, 1) | 139 | #define MPP19_BOOT_FLASH_WEn MPP(19, 0x5, 0, 0, 1) |
140 | #define MPP19_UNUSED MPP(19, 0x1, 0, 0, 1) | 140 | #define MPP19_UNUSED MPP(19, 0x1, 0, 0, 1) |
141 | 141 | ||
142 | 142 | ||
143 | #define MPP20_GPIO MPP(20, 0x0, 1, 1, 1) | 143 | #define MPP20_GPIO MPP(20, 0x0, 1, 1, 1) |
144 | #define MPP20_UA1_CTSs MPP(20, 0x4, 1, 0, 1) | 144 | #define MPP20_UA1_CTSs MPP(20, 0x4, 0, 0, 1) |
145 | #define MPP20_TDM_PCLK MPP(20, 0x6, 1, 1, 0) | 145 | #define MPP20_TDM_PCLK MPP(20, 0x6, 0, 0, 0) |
146 | #define MPP20_UNUSED MPP(20, 0x1, 0, 0, 1) | 146 | #define MPP20_UNUSED MPP(20, 0x1, 0, 0, 1) |
147 | 147 | ||
148 | 148 | ||
149 | 149 | ||
150 | #define MPP21_GPIO MPP(21, 0x0, 1, 1, 1) | 150 | #define MPP21_GPIO MPP(21, 0x0, 1, 1, 1) |
151 | #define MPP21_UA1_CTSs MPP(21, 0x4, 0, 1, 1) | 151 | #define MPP21_UA1_CTSs MPP(21, 0x4, 0, 0, 1) |
152 | #define MPP21_TDM_FSYNC MPP(21, 0x6, 1, 1, 0) | 152 | #define MPP21_TDM_FSYNC MPP(21, 0x6, 0, 0, 0) |
153 | #define MPP21_UNUSED MPP(21, 0x1, 0, 0, 1) | 153 | #define MPP21_UNUSED MPP(21, 0x1, 0, 0, 1) |
154 | 154 | ||
155 | 155 | ||
156 | 156 | ||
157 | #define MPP22_GPIO MPP(22, 0x0, 1, 1, 1) | 157 | #define MPP22_GPIO MPP(22, 0x0, 1, 1, 1) |
158 | #define MPP22_UA3_TDX MPP(22, 0x4, 0, 1, 1) | 158 | #define MPP22_UA3_TDX MPP(22, 0x4, 0, 0, 1) |
159 | #define MPP22_NAND_FLASH_REn2 MPP(22, 0x5, 0, 1, 1) | 159 | #define MPP22_NAND_FLASH_REn2 MPP(22, 0x5, 0, 0, 1) |
160 | #define MPP22_TDM_DRX MPP(22, 0x6, 1, 0, 1) | 160 | #define MPP22_TDM_DRX MPP(22, 0x6, 0, 0, 1) |
161 | #define MPP22_UNUSED MPP(22, 0x1, 0, 0, 1) | 161 | #define MPP22_UNUSED MPP(22, 0x1, 0, 0, 1) |
162 | 162 | ||
163 | 163 | ||
164 | 164 | ||
165 | #define MPP23_GPIO MPP(23, 0x0, 1, 1, 1) | 165 | #define MPP23_GPIO MPP(23, 0x0, 1, 1, 1) |
166 | #define MPP23_UA3_RDX MPP(23, 0x4, 1, 0, 1) | 166 | #define MPP23_UA3_RDX MPP(23, 0x4, 0, 0, 1) |
167 | #define MPP23_NAND_FLASH_WEn2 MPP(23, 0x5, 0, 1, 1) | 167 | #define MPP23_NAND_FLASH_WEn2 MPP(23, 0x5, 0, 0, 1) |
168 | #define MPP23_TDM_DTX MPP(23, 0x6, 0, 1, 1) | 168 | #define MPP23_TDM_DTX MPP(23, 0x6, 0, 0, 1) |
169 | #define MPP23_UNUSED MPP(23, 0x1, 0, 0, 1) | 169 | #define MPP23_UNUSED MPP(23, 0x1, 0, 0, 1) |
170 | 170 | ||
171 | 171 | ||
172 | #define MPP24_GPIO MPP(24, 0x0, 1, 1, 1) | 172 | #define MPP24_GPIO MPP(24, 0x0, 1, 1, 1) |
173 | #define MPP24_UA2_TXD MPP(24, 0x4, 0, 1, 1) | 173 | #define MPP24_UA2_TXD MPP(24, 0x4, 0, 0, 1) |
174 | #define MPP24_TDM_INTn MPP(24, 0x6, 1, 0, 1) | 174 | #define MPP24_TDM_INTn MPP(24, 0x6, 0, 0, 1) |
175 | #define MPP24_UNUSED MPP(24, 0x1, 0, 0, 1) | 175 | #define MPP24_UNUSED MPP(24, 0x1, 0, 0, 1) |
176 | 176 | ||
177 | 177 | ||
178 | #define MPP25_GPIO MPP(25, 0x0, 1, 1, 1) | 178 | #define MPP25_GPIO MPP(25, 0x0, 1, 1, 1) |
179 | #define MPP25_UA2_RXD MPP(25, 0x4, 1, 0, 1) | 179 | #define MPP25_UA2_RXD MPP(25, 0x4, 0, 0, 1) |
180 | #define MPP25_TDM_RSTn MPP(25, 0x6, 0, 1, 1) | 180 | #define MPP25_TDM_RSTn MPP(25, 0x6, 0, 0, 1) |
181 | #define MPP25_UNUSED MPP(25, 0x1, 0, 0, 1) | 181 | #define MPP25_UNUSED MPP(25, 0x1, 0, 0, 1) |
182 | 182 | ||
183 | 183 | ||
184 | #define MPP26_GPIO MPP(26, 0x0, 1, 1, 1) | 184 | #define MPP26_GPIO MPP(26, 0x0, 1, 1, 1) |
185 | #define MPP26_UA2_CTSn MPP(26, 0x4, 1, 0, 1) | 185 | #define MPP26_UA2_CTSn MPP(26, 0x4, 0, 0, 1) |
186 | #define MPP26_TDM_PCLK MPP(26, 0x6, 1, 1, 1) | 186 | #define MPP26_TDM_PCLK MPP(26, 0x6, 0, 0, 1) |
187 | #define MPP26_UNUSED MPP(26, 0x1, 0, 0, 1) | 187 | #define MPP26_UNUSED MPP(26, 0x1, 0, 0, 1) |
188 | 188 | ||
189 | 189 | ||
190 | #define MPP27_GPIO MPP(27, 0x0, 1, 1, 1) | 190 | #define MPP27_GPIO MPP(27, 0x0, 1, 1, 1) |
191 | #define MPP27_UA2_RTSn MPP(27, 0x4, 0, 1, 1) | 191 | #define MPP27_UA2_RTSn MPP(27, 0x4, 0, 0, 1) |
192 | #define MPP27_TDM_FSYNC MPP(27, 0x6, 1, 1, 1) | 192 | #define MPP27_TDM_FSYNC MPP(27, 0x6, 0, 0, 1) |
193 | #define MPP27_UNUSED MPP(27, 0x1, 0, 0, 1) | 193 | #define MPP27_UNUSED MPP(27, 0x1, 0, 0, 1) |
194 | 194 | ||
195 | 195 | ||
196 | #define MPP28_GPIO MPP(28, 0x0, 1, 1, 1) | 196 | #define MPP28_GPIO MPP(28, 0x0, 1, 1, 1) |
197 | #define MPP28_UA3_TXD MPP(28, 0x4, 0, 1, 1) | 197 | #define MPP28_UA3_TXD MPP(28, 0x4, 0, 0, 1) |
198 | #define MPP28_TDM_DRX MPP(28, 0x6, 1, 0, 1) | 198 | #define MPP28_TDM_DRX MPP(28, 0x6, 0, 0, 1) |
199 | #define MPP28_UNUSED MPP(28, 0x1, 0, 0, 1) | 199 | #define MPP28_UNUSED MPP(28, 0x1, 0, 0, 1) |
200 | 200 | ||
201 | #define MPP29_GPIO MPP(29, 0x0, 1, 1, 1) | 201 | #define MPP29_GPIO MPP(29, 0x0, 1, 1, 1) |
202 | #define MPP29_UA3_RXD MPP(29, 0x4, 1, 0, 1) | 202 | #define MPP29_UA3_RXD MPP(29, 0x4, 0, 0, 1) |
203 | #define MPP29_SYSRST_OUTn MPP(29, 0x5, 0, 1, 1) | 203 | #define MPP29_SYSRST_OUTn MPP(29, 0x5, 0, 0, 1) |
204 | #define MPP29_TDM_DTX MPP(29, 0x6, 0, 1, 1) | 204 | #define MPP29_TDM_DTX MPP(29, 0x6, 0, 0, 1) |
205 | #define MPP29_UNUSED MPP(29, 0x1, 0, 0, 1) | 205 | #define MPP29_UNUSED MPP(29, 0x1, 0, 0, 1) |
206 | 206 | ||
207 | #define MPP30_GPIO MPP(30, 0x0, 1, 1, 1) | 207 | #define MPP30_GPIO MPP(30, 0x0, 1, 1, 1) |
208 | #define MPP30_UA3_CTSn MPP(30, 0x4, 1, 0, 1) | 208 | #define MPP30_UA3_CTSn MPP(30, 0x4, 0, 0, 1) |
209 | #define MPP30_UNUSED MPP(30, 0x1, 0, 0, 1) | 209 | #define MPP30_UNUSED MPP(30, 0x1, 0, 0, 1) |
210 | 210 | ||
211 | #define MPP31_GPIO MPP(31, 0x0, 1, 1, 1) | 211 | #define MPP31_GPIO MPP(31, 0x0, 1, 1, 1) |
212 | #define MPP31_UA3_RTSn MPP(31, 0x4, 0, 1, 1) | 212 | #define MPP31_UA3_RTSn MPP(31, 0x4, 0, 0, 1) |
213 | #define MPP31_TDM1_SCSn MPP(31, 0x6, 0, 1, 1) | 213 | #define MPP31_TDM1_SCSn MPP(31, 0x6, 0, 0, 1) |
214 | #define MPP31_UNUSED MPP(31, 0x1, 0, 0, 1) | 214 | #define MPP31_UNUSED MPP(31, 0x1, 0, 0, 1) |
215 | 215 | ||
216 | 216 | ||
217 | #define MPP32_GPIO MPP(32, 0x1, 1, 1, 1) | 217 | #define MPP32_GPIO MPP(32, 0x1, 1, 1, 1) |
218 | #define MPP32_UA3_TDX MPP(32, 0x4, 0, 1, 1) | 218 | #define MPP32_UA3_TDX MPP(32, 0x4, 0, 0, 1) |
219 | #define MPP32_SYSRST_OUTn MPP(32, 0x5, 0, 1, 1) | 219 | #define MPP32_SYSRST_OUTn MPP(32, 0x5, 0, 0, 1) |
220 | #define MPP32_TDM0_RXQ MPP(32, 0x6, 0, 1, 1) | 220 | #define MPP32_TDM0_RXQ MPP(32, 0x6, 0, 0, 1) |
221 | #define MPP32_UNUSED MPP(32, 0x3, 0, 0, 1) | 221 | #define MPP32_UNUSED MPP(32, 0x3, 0, 0, 1) |
222 | 222 | ||
223 | 223 | ||
224 | #define MPP33_GPIO MPP(33, 0x1, 1, 1, 1) | 224 | #define MPP33_GPIO MPP(33, 0x1, 1, 1, 1) |
225 | #define MPP33_UA3_RDX MPP(33, 0x4, 1, 0, 1) | 225 | #define MPP33_UA3_RDX MPP(33, 0x4, 0, 0, 1) |
226 | #define MPP33_TDM0_TXQ MPP(33, 0x6, 0, 1, 1) | 226 | #define MPP33_TDM0_TXQ MPP(33, 0x6, 0, 0, 1) |
227 | #define MPP33_UNUSED MPP(33, 0x3, 0, 0, 1) | 227 | #define MPP33_UNUSED MPP(33, 0x3, 0, 0, 1) |
228 | 228 | ||
229 | 229 | ||
230 | 230 | ||
231 | #define MPP34_GPIO MPP(34, 0x1, 1, 1, 1) | 231 | #define MPP34_GPIO MPP(34, 0x1, 1, 1, 1) |
232 | #define MPP34_UA2_TDX MPP(34, 0x4, 0, 1, 1) | 232 | #define MPP34_UA2_TDX MPP(34, 0x4, 0, 0, 1) |
233 | #define MPP34_TDM1_RXQ MPP(34, 0x6, 0, 1, 1) | 233 | #define MPP34_TDM1_RXQ MPP(34, 0x6, 0, 0, 1) |
234 | #define MPP34_UNUSED MPP(34, 0x3, 0, 0, 1) | 234 | #define MPP34_UNUSED MPP(34, 0x3, 0, 0, 1) |
235 | 235 | ||
236 | 236 | ||
237 | 237 | ||
238 | #define MPP35_GPIO MPP(35, 0x1, 1, 1, 1) | 238 | #define MPP35_GPIO MPP(35, 0x1, 1, 1, 1) |
239 | #define MPP35_UA2_RDX MPP(35, 0x4, 1, 0, 1) | 239 | #define MPP35_UA2_RDX MPP(35, 0x4, 0, 0, 1) |
240 | #define MPP35_TDM1_TXQ MPP(35, 0x6, 0, 1, 1) | 240 | #define MPP35_TDM1_TXQ MPP(35, 0x6, 0, 0, 1) |
241 | #define MPP35_UNUSED MPP(35, 0x3, 0, 0, 1) | 241 | #define MPP35_UNUSED MPP(35, 0x3, 0, 0, 1) |
242 | 242 | ||
243 | #define MPP36_GPIO MPP(36, 0x1, 1, 1, 1) | 243 | #define MPP36_GPIO MPP(36, 0x1, 1, 1, 1) |
244 | #define MPP36_UA0_CTSn MPP(36, 0x2, 1, 0, 1) | 244 | #define MPP36_UA0_CTSn MPP(36, 0x2, 0, 0, 1) |
245 | #define MPP36_UA2_TDX MPP(36, 0x4, 0, 1, 1) | 245 | #define MPP36_UA2_TDX MPP(36, 0x4, 0, 0, 1) |
246 | #define MPP36_TDM0_SCSn MPP(36, 0x6, 0, 1, 1) | 246 | #define MPP36_TDM0_SCSn MPP(36, 0x6, 0, 0, 1) |
247 | #define MPP36_UNUSED MPP(36, 0x3, 0, 0, 1) | 247 | #define MPP36_UNUSED MPP(36, 0x3, 0, 0, 1) |
248 | 248 | ||
249 | 249 | ||
250 | #define MPP37_GPIO MPP(37, 0x1, 1, 1, 1) | 250 | #define MPP37_GPIO MPP(37, 0x1, 1, 1, 1) |
251 | #define MPP37_UA0_RTSn MPP(37, 0x2, 0, 1, 1) | 251 | #define MPP37_UA0_RTSn MPP(37, 0x2, 0, 0, 1) |
252 | #define MPP37_UA2_RXD MPP(37, 0x4, 1, 0, 1) | 252 | #define MPP37_UA2_RXD MPP(37, 0x4, 0, 0, 1) |
253 | #define MPP37_SYSRST_OUTn MPP(37, 0x5, 0, 1, 1) | 253 | #define MPP37_SYSRST_OUTn MPP(37, 0x5, 0, 0, 1) |
254 | #define MPP37_TDM_SCLK MPP(37, 0x6, 0, 1, 1) | 254 | #define MPP37_TDM_SCLK MPP(37, 0x6, 0, 0, 1) |
255 | #define MPP37_UNUSED MPP(37, 0x3, 0, 0, 1) | 255 | #define MPP37_UNUSED MPP(37, 0x3, 0, 0, 1) |
256 | 256 | ||
257 | 257 | ||
258 | 258 | ||
259 | 259 | ||
260 | #define MPP38_GPIO MPP(38, 0x1, 1, 1, 1) | 260 | #define MPP38_GPIO MPP(38, 0x1, 1, 1, 1) |
261 | #define MPP38_UA1_CTSn MPP(38, 0x2, 1, 0, 1) | 261 | #define MPP38_UA1_CTSn MPP(38, 0x2, 0, 0, 1) |
262 | #define MPP38_UA3_TXD MPP(38, 0x4, 0, 1, 1) | 262 | #define MPP38_UA3_TXD MPP(38, 0x4, 0, 0, 1) |
263 | #define MPP38_SYSRST_OUTn MPP(38, 0x5, 0, 1, 1) | 263 | #define MPP38_SYSRST_OUTn MPP(38, 0x5, 0, 0, 1) |
264 | #define MPP38_TDM_SMOSI MPP(38, 0x6, 0, 1, 1) | 264 | #define MPP38_TDM_SMOSI MPP(38, 0x6, 0, 0, 1) |
265 | #define MPP38_UNUSED MPP(38, 0x3, 0, 0, 1) | 265 | #define MPP38_UNUSED MPP(38, 0x3, 0, 0, 1) |
266 | 266 | ||
267 | 267 | ||
268 | 268 | ||
269 | 269 | ||
270 | #define MPP39_GPIO MPP(39, 0x1, 1, 1, 1) | 270 | #define MPP39_GPIO MPP(39, 0x1, 1, 1, 1) |
271 | #define MPP39_UA1_RTSn MPP(39, 0x2, 0, 1, 1) | 271 | #define MPP39_UA1_RTSn MPP(39, 0x2, 0, 0, 1) |
272 | #define MPP39_UA3_RXD MPP(39, 0x4, 1, 0, 1) | 272 | #define MPP39_UA3_RXD MPP(39, 0x4, 0, 0, 1) |
273 | #define MPP39_SYSRST_OUTn MPP(39, 0x5, 0, 1, 1) | 273 | #define MPP39_SYSRST_OUTn MPP(39, 0x5, 0, 0, 1) |
274 | #define MPP39_TDM_SMISO MPP(39, 0x6, 1, 0, 1) | 274 | #define MPP39_TDM_SMISO MPP(39, 0x6, 0, 0, 1) |
275 | #define MPP39_UNUSED MPP(39, 0x3, 0, 0, 1) | 275 | #define MPP39_UNUSED MPP(39, 0x3, 0, 0, 1) |
276 | 276 | ||
277 | 277 | ||
278 | 278 | ||
279 | #define MPP40_GPIO MPP(40, 0x1, 1, 1, 1) | 279 | #define MPP40_GPIO MPP(40, 0x1, 1, 1, 1) |
280 | #define MPP40_TDM_INTn MPP(40, 0x6, 1, 0, 1) | 280 | #define MPP40_TDM_INTn MPP(40, 0x6, 0, 0, 1) |
281 | #define MPP40_UNUSED MPP(40, 0x0, 0, 0, 1) | 281 | #define MPP40_UNUSED MPP(40, 0x0, 0, 0, 1) |
282 | 282 | ||
283 | 283 | ||
284 | 284 | ||
285 | #define MPP41_GPIO MPP(41, 0x1, 1, 1, 1) | 285 | #define MPP41_GPIO MPP(41, 0x1, 1, 1, 1) |
286 | #define MPP41_TDM_RSTn MPP(41, 0x6, 0, 1, 1) | 286 | #define MPP41_TDM_RSTn MPP(41, 0x6, 0, 0, 1) |
287 | #define MPP41_UNUSED MPP(41, 0x0, 0, 0, 1) | 287 | #define MPP41_UNUSED MPP(41, 0x0, 0, 0, 1) |
288 | 288 | ||
289 | 289 | ||
290 | 290 | ||
291 | #define MPP42_GPIO MPP(42, 0x1, 1, 1, 1) | 291 | #define MPP42_GPIO MPP(42, 0x1, 1, 1, 1) |
292 | #define MPP42_TDM_PCLK MPP(42, 0x6, 1, 1, 1) | 292 | #define MPP42_TDM_PCLK MPP(42, 0x6, 0, 0, 1) |
293 | #define MPP42_UNUSED MPP(42, 0x0, 0, 0, 1) | 293 | #define MPP42_UNUSED MPP(42, 0x0, 0, 0, 1) |
294 | 294 | ||
295 | 295 | ||
296 | 296 | ||
297 | #define MPP43_GPIO MPP(43, 0x1, 1, 1, 1) | 297 | #define MPP43_GPIO MPP(43, 0x1, 1, 1, 1) |
298 | #define MPP43_TDM_FSYNC MPP(43, 0x6, 1, 1, 1) | 298 | #define MPP43_TDM_FSYNC MPP(43, 0x6, 0, 0, 1) |
299 | #define MPP43_UNUSED MPP(43, 0x0, 0, 0, 1) | 299 | #define MPP43_UNUSED MPP(43, 0x0, 0, 0, 1) |
300 | 300 | ||
301 | 301 | ||
302 | 302 | ||
303 | #define MPP44_GPIO MPP(44, 0x1, 1, 1, 1) | 303 | #define MPP44_GPIO MPP(44, 0x1, 1, 1, 1) |
304 | #define MPP44_TDM_DRX MPP(44, 0x6, 1, 0, 1) | 304 | #define MPP44_TDM_DRX MPP(44, 0x6, 0, 0, 1) |
305 | #define MPP44_UNUSED MPP(44, 0x0, 0, 0, 1) | 305 | #define MPP44_UNUSED MPP(44, 0x0, 0, 0, 1) |
306 | 306 | ||
307 | 307 | ||
308 | 308 | ||
309 | #define MPP45_GPIO MPP(45, 0x1, 1, 1, 1) | 309 | #define MPP45_GPIO MPP(45, 0x1, 1, 1, 1) |
310 | #define MPP45_SATA0_ACTn MPP(45, 0x3, 0, 1, 1) | 310 | #define MPP45_SATA0_ACTn MPP(45, 0x3, 0, 0, 1) |
311 | #define MPP45_TDM_DRX MPP(45, 0x6, 0, 1, 1) | 311 | #define MPP45_TDM_DRX MPP(45, 0x6, 0, 0, 1) |
312 | #define MPP45_UNUSED MPP(45, 0x0, 0, 0, 1) | 312 | #define MPP45_UNUSED MPP(45, 0x0, 0, 0, 1) |
313 | 313 | ||
314 | 314 | ||
315 | #define MPP46_GPIO MPP(46, 0x1, 1, 1, 1) | 315 | #define MPP46_GPIO MPP(46, 0x1, 1, 1, 1) |
316 | #define MPP46_TDM_SCSn MPP(46, 0x6, 0, 1, 1) | 316 | #define MPP46_TDM_SCSn MPP(46, 0x6, 0, 0, 1) |
317 | #define MPP46_UNUSED MPP(46, 0x0, 0, 0, 1) | 317 | #define MPP46_UNUSED MPP(46, 0x0, 0, 0, 1) |
318 | 318 | ||
319 | 319 | ||
@@ -323,14 +323,14 @@ | |||
323 | 323 | ||
324 | 324 | ||
325 | #define MPP48_GPIO MPP(48, 0x1, 1, 1, 1) | 325 | #define MPP48_GPIO MPP(48, 0x1, 1, 1, 1) |
326 | #define MPP48_SATA1_ACTn MPP(48, 0x3, 0, 1, 1) | 326 | #define MPP48_SATA1_ACTn MPP(48, 0x3, 0, 0, 1) |
327 | #define MPP48_UNUSED MPP(48, 0x2, 0, 0, 1) | 327 | #define MPP48_UNUSED MPP(48, 0x2, 0, 0, 1) |
328 | 328 | ||
329 | 329 | ||
330 | 330 | ||
331 | #define MPP49_GPIO MPP(49, 0x1, 1, 1, 1) | 331 | #define MPP49_GPIO MPP(49, 0x1, 1, 1, 1) |
332 | #define MPP49_SATA0_ACTn MPP(49, 0x3, 0, 1, 1) | 332 | #define MPP49_SATA0_ACTn MPP(49, 0x3, 0, 0, 1) |
333 | #define MPP49_M_BB MPP(49, 0x4, 1, 0, 1) | 333 | #define MPP49_M_BB MPP(49, 0x4, 0, 0, 1) |
334 | #define MPP49_UNUSED MPP(49, 0x2, 0, 0, 1) | 334 | #define MPP49_UNUSED MPP(49, 0x2, 0, 0, 1) |
335 | 335 | ||
336 | 336 | ||
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 309369ea6978..be2002f42dea 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c | |||
@@ -416,13 +416,13 @@ static void __init innovator_init(void) | |||
416 | #ifdef CONFIG_ARCH_OMAP15XX | 416 | #ifdef CONFIG_ARCH_OMAP15XX |
417 | if (cpu_is_omap1510()) { | 417 | if (cpu_is_omap1510()) { |
418 | omap1_usb_init(&innovator1510_usb_config); | 418 | omap1_usb_init(&innovator1510_usb_config); |
419 | innovator_config[1].data = &innovator1510_lcd_config; | 419 | innovator_config[0].data = &innovator1510_lcd_config; |
420 | } | 420 | } |
421 | #endif | 421 | #endif |
422 | #ifdef CONFIG_ARCH_OMAP16XX | 422 | #ifdef CONFIG_ARCH_OMAP16XX |
423 | if (cpu_is_omap1610()) { | 423 | if (cpu_is_omap1610()) { |
424 | omap1_usb_init(&h2_usb_config); | 424 | omap1_usb_init(&h2_usb_config); |
425 | innovator_config[1].data = &innovator1610_lcd_config; | 425 | innovator_config[0].data = &innovator1610_lcd_config; |
426 | } | 426 | } |
427 | #endif | 427 | #endif |
428 | omap_board_config = innovator_config; | 428 | omap_board_config = innovator_config; |
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 41e6612ecbaf..e20c8ab80b0e 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig | |||
@@ -213,13 +213,12 @@ config MACH_OMAP3_PANDORA | |||
213 | depends on ARCH_OMAP3 | 213 | depends on ARCH_OMAP3 |
214 | default y | 214 | default y |
215 | select OMAP_PACKAGE_CBB | 215 | select OMAP_PACKAGE_CBB |
216 | select REGULATOR_FIXED_VOLTAGE | 216 | select REGULATOR_FIXED_VOLTAGE if REGULATOR |
217 | 217 | ||
218 | config MACH_OMAP3_TOUCHBOOK | 218 | config MACH_OMAP3_TOUCHBOOK |
219 | bool "OMAP3 Touch Book" | 219 | bool "OMAP3 Touch Book" |
220 | depends on ARCH_OMAP3 | 220 | depends on ARCH_OMAP3 |
221 | default y | 221 | default y |
222 | select BACKLIGHT_CLASS_DEVICE | ||
223 | 222 | ||
224 | config MACH_OMAP_3430SDP | 223 | config MACH_OMAP_3430SDP |
225 | bool "OMAP 3430 SDP board" | 224 | bool "OMAP 3430 SDP board" |
@@ -265,7 +264,7 @@ config MACH_OMAP_ZOOM2 | |||
265 | select SERIAL_8250 | 264 | select SERIAL_8250 |
266 | select SERIAL_CORE_CONSOLE | 265 | select SERIAL_CORE_CONSOLE |
267 | select SERIAL_8250_CONSOLE | 266 | select SERIAL_8250_CONSOLE |
268 | select REGULATOR_FIXED_VOLTAGE | 267 | select REGULATOR_FIXED_VOLTAGE if REGULATOR |
269 | 268 | ||
270 | config MACH_OMAP_ZOOM3 | 269 | config MACH_OMAP_ZOOM3 |
271 | bool "OMAP3630 Zoom3 board" | 270 | bool "OMAP3630 Zoom3 board" |
@@ -275,7 +274,7 @@ config MACH_OMAP_ZOOM3 | |||
275 | select SERIAL_8250 | 274 | select SERIAL_8250 |
276 | select SERIAL_CORE_CONSOLE | 275 | select SERIAL_CORE_CONSOLE |
277 | select SERIAL_8250_CONSOLE | 276 | select SERIAL_8250_CONSOLE |
278 | select REGULATOR_FIXED_VOLTAGE | 277 | select REGULATOR_FIXED_VOLTAGE if REGULATOR |
279 | 278 | ||
280 | config MACH_CM_T35 | 279 | config MACH_CM_T35 |
281 | bool "CompuLab CM-T35/CM-T3730 modules" | 280 | bool "CompuLab CM-T35/CM-T3730 modules" |
@@ -334,7 +333,7 @@ config MACH_OMAP_4430SDP | |||
334 | depends on ARCH_OMAP4 | 333 | depends on ARCH_OMAP4 |
335 | select OMAP_PACKAGE_CBL | 334 | select OMAP_PACKAGE_CBL |
336 | select OMAP_PACKAGE_CBS | 335 | select OMAP_PACKAGE_CBS |
337 | select REGULATOR_FIXED_VOLTAGE | 336 | select REGULATOR_FIXED_VOLTAGE if REGULATOR |
338 | 337 | ||
339 | config MACH_OMAP4_PANDA | 338 | config MACH_OMAP4_PANDA |
340 | bool "OMAP4 Panda Board" | 339 | bool "OMAP4 Panda Board" |
@@ -342,7 +341,7 @@ config MACH_OMAP4_PANDA | |||
342 | depends on ARCH_OMAP4 | 341 | depends on ARCH_OMAP4 |
343 | select OMAP_PACKAGE_CBL | 342 | select OMAP_PACKAGE_CBL |
344 | select OMAP_PACKAGE_CBS | 343 | select OMAP_PACKAGE_CBS |
345 | select REGULATOR_FIXED_VOLTAGE | 344 | select REGULATOR_FIXED_VOLTAGE if REGULATOR |
346 | 345 | ||
347 | config OMAP3_EMU | 346 | config OMAP3_EMU |
348 | bool "OMAP3 debugging peripherals" | 347 | bool "OMAP3 debugging peripherals" |
@@ -365,8 +364,8 @@ config OMAP3_SDRC_AC_TIMING | |||
365 | going on could result in system crashes; | 364 | going on could result in system crashes; |
366 | 365 | ||
367 | config OMAP4_ERRATA_I688 | 366 | config OMAP4_ERRATA_I688 |
368 | bool "OMAP4 errata: Async Bridge Corruption (BROKEN)" | 367 | bool "OMAP4 errata: Async Bridge Corruption" |
369 | depends on ARCH_OMAP4 && BROKEN | 368 | depends on ARCH_OMAP4 |
370 | select ARCH_HAS_BARRIERS | 369 | select ARCH_HAS_BARRIERS |
371 | help | 370 | help |
372 | If a data is stalled inside asynchronous bridge because of back | 371 | If a data is stalled inside asynchronous bridge because of back |
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index fc9b238cbc19..bd76394ccaf8 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile | |||
@@ -11,9 +11,9 @@ hwmod-common = omap_hwmod.o \ | |||
11 | omap_hwmod_common_data.o | 11 | omap_hwmod_common_data.o |
12 | clock-common = clock.o clock_common_data.o \ | 12 | clock-common = clock.o clock_common_data.o \ |
13 | clkt_dpll.o clkt_clksel.o | 13 | clkt_dpll.o clkt_clksel.o |
14 | secure-common = omap-smc.o omap-secure.o | 14 | secure-common = omap-smc.o omap-secure.o |
15 | 15 | ||
16 | obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) $(secure-common) | 16 | obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) |
17 | obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common) | 17 | obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common) |
18 | obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common) | 18 | obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common) |
19 | 19 | ||
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 39fba9df17fb..4e9071589bfb 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c | |||
@@ -52,8 +52,9 @@ | |||
52 | #define ETH_KS8851_QUART 138 | 52 | #define ETH_KS8851_QUART 138 |
53 | #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184 | 53 | #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184 |
54 | #define OMAP4_SFH7741_ENABLE_GPIO 188 | 54 | #define OMAP4_SFH7741_ENABLE_GPIO 188 |
55 | #define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */ | 55 | #define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ |
56 | #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ | 56 | #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ |
57 | #define HDMI_GPIO_HPD 63 /* Hotplug detect */ | ||
57 | #define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */ | 58 | #define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */ |
58 | #define DLP_POWER_ON_GPIO 40 | 59 | #define DLP_POWER_ON_GPIO 40 |
59 | 60 | ||
@@ -603,8 +604,9 @@ static void __init omap_sfh7741prox_init(void) | |||
603 | } | 604 | } |
604 | 605 | ||
605 | static struct gpio sdp4430_hdmi_gpios[] = { | 606 | static struct gpio sdp4430_hdmi_gpios[] = { |
606 | { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, | 607 | { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, |
607 | { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, | 608 | { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, |
609 | { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" }, | ||
608 | }; | 610 | }; |
609 | 611 | ||
610 | static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev) | 612 | static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev) |
@@ -621,8 +623,7 @@ static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev) | |||
621 | 623 | ||
622 | static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev) | 624 | static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev) |
623 | { | 625 | { |
624 | gpio_free(HDMI_GPIO_LS_OE); | 626 | gpio_free_array(sdp4430_hdmi_gpios, ARRAY_SIZE(sdp4430_hdmi_gpios)); |
625 | gpio_free(HDMI_GPIO_HPD); | ||
626 | } | 627 | } |
627 | 628 | ||
628 | static struct nokia_dsi_panel_data dsi1_panel = { | 629 | static struct nokia_dsi_panel_data dsi1_panel = { |
@@ -738,6 +739,10 @@ static void sdp4430_lcd_init(void) | |||
738 | pr_err("%s: Could not get lcd2_reset_gpio\n", __func__); | 739 | pr_err("%s: Could not get lcd2_reset_gpio\n", __func__); |
739 | } | 740 | } |
740 | 741 | ||
742 | static struct omap_dss_hdmi_data sdp4430_hdmi_data = { | ||
743 | .hpd_gpio = HDMI_GPIO_HPD, | ||
744 | }; | ||
745 | |||
741 | static struct omap_dss_device sdp4430_hdmi_device = { | 746 | static struct omap_dss_device sdp4430_hdmi_device = { |
742 | .name = "hdmi", | 747 | .name = "hdmi", |
743 | .driver_name = "hdmi_panel", | 748 | .driver_name = "hdmi_panel", |
@@ -745,6 +750,7 @@ static struct omap_dss_device sdp4430_hdmi_device = { | |||
745 | .platform_enable = sdp4430_panel_enable_hdmi, | 750 | .platform_enable = sdp4430_panel_enable_hdmi, |
746 | .platform_disable = sdp4430_panel_disable_hdmi, | 751 | .platform_disable = sdp4430_panel_disable_hdmi, |
747 | .channel = OMAP_DSS_CHANNEL_DIGIT, | 752 | .channel = OMAP_DSS_CHANNEL_DIGIT, |
753 | .data = &sdp4430_hdmi_data, | ||
748 | }; | 754 | }; |
749 | 755 | ||
750 | static struct picodlp_panel_data sdp4430_picodlp_pdata = { | 756 | static struct picodlp_panel_data sdp4430_picodlp_pdata = { |
@@ -808,7 +814,7 @@ static struct omap_dss_board_info sdp4430_dss_data = { | |||
808 | .default_device = &sdp4430_lcd_device, | 814 | .default_device = &sdp4430_lcd_device, |
809 | }; | 815 | }; |
810 | 816 | ||
811 | static void omap_4430sdp_display_init(void) | 817 | static void __init omap_4430sdp_display_init(void) |
812 | { | 818 | { |
813 | int r; | 819 | int r; |
814 | 820 | ||
@@ -829,6 +835,10 @@ static void omap_4430sdp_display_init(void) | |||
829 | omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); | 835 | omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); |
830 | else | 836 | else |
831 | omap_hdmi_init(0); | 837 | omap_hdmi_init(0); |
838 | |||
839 | omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); | ||
840 | omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); | ||
841 | omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); | ||
832 | } | 842 | } |
833 | 843 | ||
834 | #ifdef CONFIG_OMAP_MUX | 844 | #ifdef CONFIG_OMAP_MUX |
@@ -841,7 +851,7 @@ static struct omap_board_mux board_mux[] __initdata = { | |||
841 | #define board_mux NULL | 851 | #define board_mux NULL |
842 | #endif | 852 | #endif |
843 | 853 | ||
844 | static void omap4_sdp4430_wifi_mux_init(void) | 854 | static void __init omap4_sdp4430_wifi_mux_init(void) |
845 | { | 855 | { |
846 | omap_mux_init_gpio(GPIO_WIFI_IRQ, OMAP_PIN_INPUT | | 856 | omap_mux_init_gpio(GPIO_WIFI_IRQ, OMAP_PIN_INPUT | |
847 | OMAP_PIN_OFF_WAKEUPENABLE); | 857 | OMAP_PIN_OFF_WAKEUPENABLE); |
@@ -868,12 +878,17 @@ static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = { | |||
868 | .board_tcxo_clock = WL12XX_TCXOCLOCK_26, | 878 | .board_tcxo_clock = WL12XX_TCXOCLOCK_26, |
869 | }; | 879 | }; |
870 | 880 | ||
871 | static void omap4_sdp4430_wifi_init(void) | 881 | static void __init omap4_sdp4430_wifi_init(void) |
872 | { | 882 | { |
883 | int ret; | ||
884 | |||
873 | omap4_sdp4430_wifi_mux_init(); | 885 | omap4_sdp4430_wifi_mux_init(); |
874 | if (wl12xx_set_platform_data(&omap4_sdp4430_wlan_data)) | 886 | ret = wl12xx_set_platform_data(&omap4_sdp4430_wlan_data); |
875 | pr_err("Error setting wl12xx data\n"); | 887 | if (ret) |
876 | platform_device_register(&omap_vwlan_device); | 888 | pr_err("Error setting wl12xx data: %d\n", ret); |
889 | ret = platform_device_register(&omap_vwlan_device); | ||
890 | if (ret) | ||
891 | pr_err("Error registering wl12xx device: %d\n", ret); | ||
877 | } | 892 | } |
878 | 893 | ||
879 | static void __init omap_4430sdp_init(void) | 894 | static void __init omap_4430sdp_init(void) |
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index e921e3be24a4..d73316ed4207 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c | |||
@@ -437,7 +437,7 @@ static struct usbhs_omap_board_data usbhs_bdata __initdata = { | |||
437 | .reset_gpio_port[2] = -EINVAL | 437 | .reset_gpio_port[2] = -EINVAL |
438 | }; | 438 | }; |
439 | 439 | ||
440 | static void cm_t35_init_usbh(void) | 440 | static void __init cm_t35_init_usbh(void) |
441 | { | 441 | { |
442 | int err; | 442 | int err; |
443 | 443 | ||
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index d58756060483..ad497620539b 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c | |||
@@ -17,6 +17,7 @@ | |||
17 | #include <linux/i2c/twl.h> | 17 | #include <linux/i2c/twl.h> |
18 | 18 | ||
19 | #include <mach/hardware.h> | 19 | #include <mach/hardware.h> |
20 | #include <asm/hardware/gic.h> | ||
20 | #include <asm/mach/arch.h> | 21 | #include <asm/mach/arch.h> |
21 | 22 | ||
22 | #include <plat/board.h> | 23 | #include <plat/board.h> |
@@ -102,6 +103,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)") | |||
102 | .map_io = omap242x_map_io, | 103 | .map_io = omap242x_map_io, |
103 | .init_early = omap2420_init_early, | 104 | .init_early = omap2420_init_early, |
104 | .init_irq = omap2_init_irq, | 105 | .init_irq = omap2_init_irq, |
106 | .handle_irq = omap2_intc_handle_irq, | ||
105 | .init_machine = omap_generic_init, | 107 | .init_machine = omap_generic_init, |
106 | .timer = &omap2_timer, | 108 | .timer = &omap2_timer, |
107 | .dt_compat = omap242x_boards_compat, | 109 | .dt_compat = omap242x_boards_compat, |
@@ -141,6 +143,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") | |||
141 | .map_io = omap3_map_io, | 143 | .map_io = omap3_map_io, |
142 | .init_early = omap3430_init_early, | 144 | .init_early = omap3430_init_early, |
143 | .init_irq = omap3_init_irq, | 145 | .init_irq = omap3_init_irq, |
146 | .handle_irq = omap3_intc_handle_irq, | ||
144 | .init_machine = omap3_init, | 147 | .init_machine = omap3_init, |
145 | .timer = &omap3_timer, | 148 | .timer = &omap3_timer, |
146 | .dt_compat = omap3_boards_compat, | 149 | .dt_compat = omap3_boards_compat, |
@@ -160,6 +163,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)") | |||
160 | .map_io = omap4_map_io, | 163 | .map_io = omap4_map_io, |
161 | .init_early = omap4430_init_early, | 164 | .init_early = omap4430_init_early, |
162 | .init_irq = gic_init_irq, | 165 | .init_irq = gic_init_irq, |
166 | .handle_irq = gic_handle_irq, | ||
163 | .init_machine = omap4_init, | 167 | .init_machine = omap4_init, |
164 | .timer = &omap4_timer, | 168 | .timer = &omap4_timer, |
165 | .dt_compat = omap4_boards_compat, | 169 | .dt_compat = omap4_boards_compat, |
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 42a4d11fad23..672262717601 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c | |||
@@ -371,7 +371,11 @@ static void n8x0_mmc_callback(void *data, u8 card_mask) | |||
371 | else | 371 | else |
372 | *openp = 0; | 372 | *openp = 0; |
373 | 373 | ||
374 | #ifdef CONFIG_MMC_OMAP | ||
374 | omap_mmc_notify_cover_event(mmc_device, index, *openp); | 375 | omap_mmc_notify_cover_event(mmc_device, index, *openp); |
376 | #else | ||
377 | pr_warn("MMC: notify cover event not available\n"); | ||
378 | #endif | ||
375 | } | 379 | } |
376 | 380 | ||
377 | static int n8x0_mmc_late_init(struct device *dev) | 381 | static int n8x0_mmc_late_init(struct device *dev) |
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 003fe34c9343..c877236a8442 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c | |||
@@ -381,7 +381,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev, | |||
381 | gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI"); | 381 | gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI"); |
382 | 382 | ||
383 | /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ | 383 | /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ |
384 | gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; | 384 | gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1; |
385 | 385 | ||
386 | platform_device_register(&leds_gpio); | 386 | platform_device_register(&leds_gpio); |
387 | 387 | ||
@@ -617,6 +617,21 @@ static struct gpio omap3_evm_ehci_gpios[] __initdata = { | |||
617 | { OMAP3_EVM_EHCI_SELECT, GPIOF_OUT_INIT_LOW, "select EHCI port" }, | 617 | { OMAP3_EVM_EHCI_SELECT, GPIOF_OUT_INIT_LOW, "select EHCI port" }, |
618 | }; | 618 | }; |
619 | 619 | ||
620 | static void __init omap3_evm_wl12xx_init(void) | ||
621 | { | ||
622 | #ifdef CONFIG_WL12XX_PLATFORM_DATA | ||
623 | int ret; | ||
624 | |||
625 | /* WL12xx WLAN Init */ | ||
626 | ret = wl12xx_set_platform_data(&omap3evm_wlan_data); | ||
627 | if (ret) | ||
628 | pr_err("error setting wl12xx data: %d\n", ret); | ||
629 | ret = platform_device_register(&omap3evm_wlan_regulator); | ||
630 | if (ret) | ||
631 | pr_err("error registering wl12xx device: %d\n", ret); | ||
632 | #endif | ||
633 | } | ||
634 | |||
620 | static void __init omap3_evm_init(void) | 635 | static void __init omap3_evm_init(void) |
621 | { | 636 | { |
622 | omap3_evm_get_revision(); | 637 | omap3_evm_get_revision(); |
@@ -665,13 +680,7 @@ static void __init omap3_evm_init(void) | |||
665 | omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL); | 680 | omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL); |
666 | omap3evm_init_smsc911x(); | 681 | omap3evm_init_smsc911x(); |
667 | omap3_evm_display_init(); | 682 | omap3_evm_display_init(); |
668 | 683 | omap3_evm_wl12xx_init(); | |
669 | #ifdef CONFIG_WL12XX_PLATFORM_DATA | ||
670 | /* WL12xx WLAN Init */ | ||
671 | if (wl12xx_set_platform_data(&omap3evm_wlan_data)) | ||
672 | pr_err("error setting wl12xx data\n"); | ||
673 | platform_device_register(&omap3evm_wlan_regulator); | ||
674 | #endif | ||
675 | } | 684 | } |
676 | 685 | ||
677 | MACHINE_START(OMAP3EVM, "OMAP3 EVM") | 686 | MACHINE_START(OMAP3EVM, "OMAP3 EVM") |
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 30ad40db2cf3..28fc271f7031 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c | |||
@@ -51,8 +51,9 @@ | |||
51 | #define GPIO_HUB_NRESET 62 | 51 | #define GPIO_HUB_NRESET 62 |
52 | #define GPIO_WIFI_PMENA 43 | 52 | #define GPIO_WIFI_PMENA 43 |
53 | #define GPIO_WIFI_IRQ 53 | 53 | #define GPIO_WIFI_IRQ 53 |
54 | #define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */ | 54 | #define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ |
55 | #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ | 55 | #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ |
56 | #define HDMI_GPIO_HPD 63 /* Hotplug detect */ | ||
56 | 57 | ||
57 | /* wl127x BT, FM, GPS connectivity chip */ | 58 | /* wl127x BT, FM, GPS connectivity chip */ |
58 | static int wl1271_gpios[] = {46, -1, -1}; | 59 | static int wl1271_gpios[] = {46, -1, -1}; |
@@ -413,8 +414,9 @@ int __init omap4_panda_dvi_init(void) | |||
413 | } | 414 | } |
414 | 415 | ||
415 | static struct gpio panda_hdmi_gpios[] = { | 416 | static struct gpio panda_hdmi_gpios[] = { |
416 | { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, | 417 | { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, |
417 | { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, | 418 | { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, |
419 | { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" }, | ||
418 | }; | 420 | }; |
419 | 421 | ||
420 | static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev) | 422 | static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev) |
@@ -431,10 +433,13 @@ static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev) | |||
431 | 433 | ||
432 | static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev) | 434 | static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev) |
433 | { | 435 | { |
434 | gpio_free(HDMI_GPIO_LS_OE); | 436 | gpio_free_array(panda_hdmi_gpios, ARRAY_SIZE(panda_hdmi_gpios)); |
435 | gpio_free(HDMI_GPIO_HPD); | ||
436 | } | 437 | } |
437 | 438 | ||
439 | static struct omap_dss_hdmi_data omap4_panda_hdmi_data = { | ||
440 | .hpd_gpio = HDMI_GPIO_HPD, | ||
441 | }; | ||
442 | |||
438 | static struct omap_dss_device omap4_panda_hdmi_device = { | 443 | static struct omap_dss_device omap4_panda_hdmi_device = { |
439 | .name = "hdmi", | 444 | .name = "hdmi", |
440 | .driver_name = "hdmi_panel", | 445 | .driver_name = "hdmi_panel", |
@@ -442,6 +447,7 @@ static struct omap_dss_device omap4_panda_hdmi_device = { | |||
442 | .platform_enable = omap4_panda_panel_enable_hdmi, | 447 | .platform_enable = omap4_panda_panel_enable_hdmi, |
443 | .platform_disable = omap4_panda_panel_disable_hdmi, | 448 | .platform_disable = omap4_panda_panel_disable_hdmi, |
444 | .channel = OMAP_DSS_CHANNEL_DIGIT, | 449 | .channel = OMAP_DSS_CHANNEL_DIGIT, |
450 | .data = &omap4_panda_hdmi_data, | ||
445 | }; | 451 | }; |
446 | 452 | ||
447 | static struct omap_dss_device *omap4_panda_dss_devices[] = { | 453 | static struct omap_dss_device *omap4_panda_dss_devices[] = { |
@@ -473,18 +479,24 @@ void omap4_panda_display_init(void) | |||
473 | omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); | 479 | omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); |
474 | else | 480 | else |
475 | omap_hdmi_init(0); | 481 | omap_hdmi_init(0); |
482 | |||
483 | omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); | ||
484 | omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); | ||
485 | omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); | ||
476 | } | 486 | } |
477 | 487 | ||
478 | static void __init omap4_panda_init(void) | 488 | static void __init omap4_panda_init(void) |
479 | { | 489 | { |
480 | int package = OMAP_PACKAGE_CBS; | 490 | int package = OMAP_PACKAGE_CBS; |
491 | int ret; | ||
481 | 492 | ||
482 | if (omap_rev() == OMAP4430_REV_ES1_0) | 493 | if (omap_rev() == OMAP4430_REV_ES1_0) |
483 | package = OMAP_PACKAGE_CBL; | 494 | package = OMAP_PACKAGE_CBL; |
484 | omap4_mux_init(board_mux, NULL, package); | 495 | omap4_mux_init(board_mux, NULL, package); |
485 | 496 | ||
486 | if (wl12xx_set_platform_data(&omap_panda_wlan_data)) | 497 | ret = wl12xx_set_platform_data(&omap_panda_wlan_data); |
487 | pr_err("error setting wl12xx data\n"); | 498 | if (ret) |
499 | pr_err("error setting wl12xx data: %d\n", ret); | ||
488 | 500 | ||
489 | omap4_panda_i2c_init(); | 501 | omap4_panda_i2c_init(); |
490 | platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices)); | 502 | platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices)); |
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 8d7ce11cfeaf..c126461836ac 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c | |||
@@ -296,8 +296,10 @@ static void enable_board_wakeup_source(void) | |||
296 | 296 | ||
297 | void __init zoom_peripherals_init(void) | 297 | void __init zoom_peripherals_init(void) |
298 | { | 298 | { |
299 | if (wl12xx_set_platform_data(&omap_zoom_wlan_data)) | 299 | int ret = wl12xx_set_platform_data(&omap_zoom_wlan_data); |
300 | pr_err("error setting wl12xx data\n"); | 300 | |
301 | if (ret) | ||
302 | pr_err("error setting wl12xx data: %d\n", ret); | ||
301 | 303 | ||
302 | omap_i2c_init(); | 304 | omap_i2c_init(); |
303 | platform_device_register(&omap_vwlan_device); | 305 | platform_device_register(&omap_vwlan_device); |
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index febffde2ff10..7e9338e8d684 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h | |||
@@ -132,6 +132,7 @@ void omap3_map_io(void); | |||
132 | void am33xx_map_io(void); | 132 | void am33xx_map_io(void); |
133 | void omap4_map_io(void); | 133 | void omap4_map_io(void); |
134 | void ti81xx_map_io(void); | 134 | void ti81xx_map_io(void); |
135 | void omap_barriers_init(void); | ||
135 | 136 | ||
136 | /** | 137 | /** |
137 | * omap_test_timeout - busy-loop, testing a condition | 138 | * omap_test_timeout - busy-loop, testing a condition |
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index cfdbb86bc84e..72e018b9b260 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c | |||
@@ -65,7 +65,6 @@ static int omap4_enter_idle(struct cpuidle_device *dev, | |||
65 | struct timespec ts_preidle, ts_postidle, ts_idle; | 65 | struct timespec ts_preidle, ts_postidle, ts_idle; |
66 | u32 cpu1_state; | 66 | u32 cpu1_state; |
67 | int idle_time; | 67 | int idle_time; |
68 | int new_state_idx; | ||
69 | int cpu_id = smp_processor_id(); | 68 | int cpu_id = smp_processor_id(); |
70 | 69 | ||
71 | /* Used to keep track of the total time in idle */ | 70 | /* Used to keep track of the total time in idle */ |
@@ -84,8 +83,8 @@ static int omap4_enter_idle(struct cpuidle_device *dev, | |||
84 | */ | 83 | */ |
85 | cpu1_state = pwrdm_read_pwrst(cpu1_pd); | 84 | cpu1_state = pwrdm_read_pwrst(cpu1_pd); |
86 | if (cpu1_state != PWRDM_POWER_OFF) { | 85 | if (cpu1_state != PWRDM_POWER_OFF) { |
87 | new_state_idx = drv->safe_state_index; | 86 | index = drv->safe_state_index; |
88 | cx = cpuidle_get_statedata(&dev->states_usage[new_state_idx]); | 87 | cx = cpuidle_get_statedata(&dev->states_usage[index]); |
89 | } | 88 | } |
90 | 89 | ||
91 | if (index > 0) | 90 | if (index > 0) |
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 0b510ad01a00..283d11eae693 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c | |||
@@ -405,6 +405,7 @@ static int omap_mcspi_init(struct omap_hwmod *oh, void *unused) | |||
405 | break; | 405 | break; |
406 | default: | 406 | default: |
407 | pr_err("Invalid McSPI Revision value\n"); | 407 | pr_err("Invalid McSPI Revision value\n"); |
408 | kfree(pdata); | ||
408 | return -EINVAL; | 409 | return -EINVAL; |
409 | } | 410 | } |
410 | 411 | ||
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 3c446d1a1781..3677b1f58b85 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c | |||
@@ -103,12 +103,8 @@ static void omap4_hdmi_mux_pads(enum omap_hdmi_flags flags) | |||
103 | u32 reg; | 103 | u32 reg; |
104 | u16 control_i2c_1; | 104 | u16 control_i2c_1; |
105 | 105 | ||
106 | /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */ | ||
107 | omap_mux_init_signal("hdmi_hpd", | ||
108 | OMAP_PIN_INPUT_PULLUP); | ||
109 | omap_mux_init_signal("hdmi_cec", | 106 | omap_mux_init_signal("hdmi_cec", |
110 | OMAP_PIN_INPUT_PULLUP); | 107 | OMAP_PIN_INPUT_PULLUP); |
111 | /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */ | ||
112 | omap_mux_init_signal("hdmi_ddc_scl", | 108 | omap_mux_init_signal("hdmi_ddc_scl", |
113 | OMAP_PIN_INPUT_PULLUP); | 109 | OMAP_PIN_INPUT_PULLUP); |
114 | omap_mux_init_signal("hdmi_ddc_sda", | 110 | omap_mux_init_signal("hdmi_ddc_sda", |
diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c index 997033129d26..bbb870c04a5e 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c | |||
@@ -19,6 +19,8 @@ | |||
19 | #include <linux/interrupt.h> | 19 | #include <linux/interrupt.h> |
20 | #include <linux/io.h> | 20 | #include <linux/io.h> |
21 | #include <linux/smsc911x.h> | 21 | #include <linux/smsc911x.h> |
22 | #include <linux/regulator/fixed.h> | ||
23 | #include <linux/regulator/machine.h> | ||
22 | 24 | ||
23 | #include <plat/board.h> | 25 | #include <plat/board.h> |
24 | #include <plat/gpmc.h> | 26 | #include <plat/gpmc.h> |
@@ -42,6 +44,50 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = { | |||
42 | .flags = SMSC911X_USE_16BIT, | 44 | .flags = SMSC911X_USE_16BIT, |
43 | }; | 45 | }; |
44 | 46 | ||
47 | static struct regulator_consumer_supply gpmc_smsc911x_supply[] = { | ||
48 | REGULATOR_SUPPLY("vddvario", "smsc911x.0"), | ||
49 | REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), | ||
50 | }; | ||
51 | |||
52 | /* Generic regulator definition to satisfy smsc911x */ | ||
53 | static struct regulator_init_data gpmc_smsc911x_reg_init_data = { | ||
54 | .constraints = { | ||
55 | .min_uV = 3300000, | ||
56 | .max_uV = 3300000, | ||
57 | .valid_modes_mask = REGULATOR_MODE_NORMAL | ||
58 | | REGULATOR_MODE_STANDBY, | ||
59 | .valid_ops_mask = REGULATOR_CHANGE_MODE | ||
60 | | REGULATOR_CHANGE_STATUS, | ||
61 | }, | ||
62 | .num_consumer_supplies = ARRAY_SIZE(gpmc_smsc911x_supply), | ||
63 | .consumer_supplies = gpmc_smsc911x_supply, | ||
64 | }; | ||
65 | |||
66 | static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = { | ||
67 | .supply_name = "gpmc_smsc911x", | ||
68 | .microvolts = 3300000, | ||
69 | .gpio = -EINVAL, | ||
70 | .startup_delay = 0, | ||
71 | .enable_high = 0, | ||
72 | .enabled_at_boot = 1, | ||
73 | .init_data = &gpmc_smsc911x_reg_init_data, | ||
74 | }; | ||
75 | |||
76 | /* | ||
77 | * Platform device id of 42 is a temporary fix to avoid conflicts | ||
78 | * with other reg-fixed-voltage devices. The real fix should | ||
79 | * involve the driver core providing a way of dynamically | ||
80 | * assigning a unique id on registration for platform devices | ||
81 | * in the same name space. | ||
82 | */ | ||
83 | static struct platform_device gpmc_smsc911x_regulator = { | ||
84 | .name = "reg-fixed-voltage", | ||
85 | .id = 42, | ||
86 | .dev = { | ||
87 | .platform_data = &gpmc_smsc911x_fixed_reg_data, | ||
88 | }, | ||
89 | }; | ||
90 | |||
45 | /* | 91 | /* |
46 | * Initialize smsc911x device connected to the GPMC. Note that we | 92 | * Initialize smsc911x device connected to the GPMC. Note that we |
47 | * assume that pin multiplexing is done in the board-*.c file, | 93 | * assume that pin multiplexing is done in the board-*.c file, |
@@ -55,6 +101,12 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) | |||
55 | 101 | ||
56 | gpmc_cfg = board_data; | 102 | gpmc_cfg = board_data; |
57 | 103 | ||
104 | ret = platform_device_register(&gpmc_smsc911x_regulator); | ||
105 | if (ret < 0) { | ||
106 | pr_err("Unable to register smsc911x regulators: %d\n", ret); | ||
107 | return; | ||
108 | } | ||
109 | |||
58 | if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) { | 110 | if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) { |
59 | pr_err("Failed to request GPMC mem region\n"); | 111 | pr_err("Failed to request GPMC mem region\n"); |
60 | return; | 112 | return; |
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 130034bf01d5..dfffbbf4c009 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c | |||
@@ -528,7 +528,13 @@ int gpmc_cs_configure(int cs, int cmd, int wval) | |||
528 | 528 | ||
529 | case GPMC_CONFIG_DEV_SIZE: | 529 | case GPMC_CONFIG_DEV_SIZE: |
530 | regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); | 530 | regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); |
531 | |||
532 | /* clear 2 target bits */ | ||
533 | regval &= ~GPMC_CONFIG1_DEVICESIZE(3); | ||
534 | |||
535 | /* set the proper value */ | ||
531 | regval |= GPMC_CONFIG1_DEVICESIZE(wval); | 536 | regval |= GPMC_CONFIG1_DEVICESIZE(wval); |
537 | |||
532 | gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval); | 538 | gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval); |
533 | break; | 539 | break; |
534 | 540 | ||
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index bd844af13af5..19dd1657245c 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c | |||
@@ -175,14 +175,15 @@ static void hsmmc2_select_input_clk_src(struct omap_mmc_platform_data *mmc) | |||
175 | { | 175 | { |
176 | u32 reg; | 176 | u32 reg; |
177 | 177 | ||
178 | if (mmc->slots[0].internal_clock) { | 178 | reg = omap_ctrl_readl(control_devconf1_offset); |
179 | reg = omap_ctrl_readl(control_devconf1_offset); | 179 | if (mmc->slots[0].internal_clock) |
180 | reg |= OMAP2_MMCSDIO2ADPCLKISEL; | 180 | reg |= OMAP2_MMCSDIO2ADPCLKISEL; |
181 | omap_ctrl_writel(reg, control_devconf1_offset); | 181 | else |
182 | } | 182 | reg &= ~OMAP2_MMCSDIO2ADPCLKISEL; |
183 | omap_ctrl_writel(reg, control_devconf1_offset); | ||
183 | } | 184 | } |
184 | 185 | ||
185 | static void hsmmc23_before_set_reg(struct device *dev, int slot, | 186 | static void hsmmc2_before_set_reg(struct device *dev, int slot, |
186 | int power_on, int vdd) | 187 | int power_on, int vdd) |
187 | { | 188 | { |
188 | struct omap_mmc_platform_data *mmc = dev->platform_data; | 189 | struct omap_mmc_platform_data *mmc = dev->platform_data; |
@@ -292,8 +293,8 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, | |||
292 | } | 293 | } |
293 | } | 294 | } |
294 | 295 | ||
295 | static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, | 296 | static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, |
296 | struct omap_mmc_platform_data *mmc) | 297 | struct omap_mmc_platform_data *mmc) |
297 | { | 298 | { |
298 | char *hc_name; | 299 | char *hc_name; |
299 | 300 | ||
@@ -407,14 +408,13 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, | |||
407 | c->caps &= ~MMC_CAP_8_BIT_DATA; | 408 | c->caps &= ~MMC_CAP_8_BIT_DATA; |
408 | c->caps |= MMC_CAP_4_BIT_DATA; | 409 | c->caps |= MMC_CAP_4_BIT_DATA; |
409 | } | 410 | } |
410 | /* FALLTHROUGH */ | ||
411 | case 3: | ||
412 | if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { | 411 | if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { |
413 | /* off-chip level shifting, or none */ | 412 | /* off-chip level shifting, or none */ |
414 | mmc->slots[0].before_set_reg = hsmmc23_before_set_reg; | 413 | mmc->slots[0].before_set_reg = hsmmc2_before_set_reg; |
415 | mmc->slots[0].after_set_reg = NULL; | 414 | mmc->slots[0].after_set_reg = NULL; |
416 | } | 415 | } |
417 | break; | 416 | break; |
417 | case 3: | ||
418 | case 4: | 418 | case 4: |
419 | case 5: | 419 | case 5: |
420 | mmc->slots[0].before_set_reg = NULL; | 420 | mmc->slots[0].before_set_reg = NULL; |
@@ -428,9 +428,10 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, | |||
428 | return 0; | 428 | return 0; |
429 | } | 429 | } |
430 | 430 | ||
431 | static int omap_hsmmc_done; | ||
431 | #define MAX_OMAP_MMC_HWMOD_NAME_LEN 16 | 432 | #define MAX_OMAP_MMC_HWMOD_NAME_LEN 16 |
432 | 433 | ||
433 | void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) | 434 | void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) |
434 | { | 435 | { |
435 | struct omap_hwmod *oh; | 436 | struct omap_hwmod *oh; |
436 | struct platform_device *pdev; | 437 | struct platform_device *pdev; |
@@ -487,10 +488,15 @@ done: | |||
487 | kfree(mmc_data); | 488 | kfree(mmc_data); |
488 | } | 489 | } |
489 | 490 | ||
490 | void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) | 491 | void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) |
491 | { | 492 | { |
492 | u32 reg; | 493 | u32 reg; |
493 | 494 | ||
495 | if (omap_hsmmc_done) | ||
496 | return; | ||
497 | |||
498 | omap_hsmmc_done = 1; | ||
499 | |||
494 | if (!cpu_is_omap44xx()) { | 500 | if (!cpu_is_omap44xx()) { |
495 | if (cpu_is_omap2430()) { | 501 | if (cpu_is_omap2430()) { |
496 | control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE; | 502 | control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE; |
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 3f174d51f67f..fb11b44fbdec 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c | |||
@@ -307,6 +307,7 @@ void __init omapam33xx_map_common_io(void) | |||
307 | void __init omap44xx_map_common_io(void) | 307 | void __init omap44xx_map_common_io(void) |
308 | { | 308 | { |
309 | iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc)); | 309 | iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc)); |
310 | omap_barriers_init(); | ||
310 | } | 311 | } |
311 | #endif | 312 | #endif |
312 | 313 | ||
@@ -388,7 +389,7 @@ static void __init omap_hwmod_init_postsetup(void) | |||
388 | omap_pm_if_early_init(); | 389 | omap_pm_if_early_init(); |
389 | } | 390 | } |
390 | 391 | ||
391 | #ifdef CONFIG_ARCH_OMAP2 | 392 | #ifdef CONFIG_SOC_OMAP2420 |
392 | void __init omap2420_init_early(void) | 393 | void __init omap2420_init_early(void) |
393 | { | 394 | { |
394 | omap2_set_globals_242x(); | 395 | omap2_set_globals_242x(); |
@@ -400,7 +401,9 @@ void __init omap2420_init_early(void) | |||
400 | omap_hwmod_init_postsetup(); | 401 | omap_hwmod_init_postsetup(); |
401 | omap2420_clk_init(); | 402 | omap2420_clk_init(); |
402 | } | 403 | } |
404 | #endif | ||
403 | 405 | ||
406 | #ifdef CONFIG_SOC_OMAP2430 | ||
404 | void __init omap2430_init_early(void) | 407 | void __init omap2430_init_early(void) |
405 | { | 408 | { |
406 | omap2_set_globals_243x(); | 409 | omap2_set_globals_243x(); |
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index 609ea2ded7e3..2cc1aa004b94 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c | |||
@@ -281,8 +281,16 @@ static struct omap_mbox mbox_iva_info = { | |||
281 | .ops = &omap2_mbox_ops, | 281 | .ops = &omap2_mbox_ops, |
282 | .priv = &omap2_mbox_iva_priv, | 282 | .priv = &omap2_mbox_iva_priv, |
283 | }; | 283 | }; |
284 | #endif | ||
284 | 285 | ||
285 | struct omap_mbox *omap2_mboxes[] = { &mbox_dsp_info, &mbox_iva_info, NULL }; | 286 | #ifdef CONFIG_ARCH_OMAP2 |
287 | struct omap_mbox *omap2_mboxes[] = { | ||
288 | &mbox_dsp_info, | ||
289 | #ifdef CONFIG_SOC_OMAP2420 | ||
290 | &mbox_iva_info, | ||
291 | #endif | ||
292 | NULL | ||
293 | }; | ||
286 | #endif | 294 | #endif |
287 | 295 | ||
288 | #if defined(CONFIG_ARCH_OMAP4) | 296 | #if defined(CONFIG_ARCH_OMAP4) |
@@ -412,7 +420,8 @@ static void __exit omap2_mbox_exit(void) | |||
412 | platform_driver_unregister(&omap2_mbox_driver); | 420 | platform_driver_unregister(&omap2_mbox_driver); |
413 | } | 421 | } |
414 | 422 | ||
415 | module_init(omap2_mbox_init); | 423 | /* must be ready before omap3isp is probed */ |
424 | subsys_initcall(omap2_mbox_init); | ||
416 | module_exit(omap2_mbox_exit); | 425 | module_exit(omap2_mbox_exit); |
417 | 426 | ||
418 | MODULE_LICENSE("GPL v2"); | 427 | MODULE_LICENSE("GPL v2"); |
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index e1cc75d1a57a..611a0e3d54ca 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c | |||
@@ -100,8 +100,8 @@ void omap_mux_write_array(struct omap_mux_partition *partition, | |||
100 | 100 | ||
101 | static char *omap_mux_options; | 101 | static char *omap_mux_options; |
102 | 102 | ||
103 | static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition, | 103 | static int _omap_mux_init_gpio(struct omap_mux_partition *partition, |
104 | int gpio, int val) | 104 | int gpio, int val) |
105 | { | 105 | { |
106 | struct omap_mux_entry *e; | 106 | struct omap_mux_entry *e; |
107 | struct omap_mux *gpio_mux = NULL; | 107 | struct omap_mux *gpio_mux = NULL; |
@@ -145,7 +145,7 @@ static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition, | |||
145 | return 0; | 145 | return 0; |
146 | } | 146 | } |
147 | 147 | ||
148 | int __init omap_mux_init_gpio(int gpio, int val) | 148 | int omap_mux_init_gpio(int gpio, int val) |
149 | { | 149 | { |
150 | struct omap_mux_partition *partition; | 150 | struct omap_mux_partition *partition; |
151 | int ret; | 151 | int ret; |
@@ -159,9 +159,9 @@ int __init omap_mux_init_gpio(int gpio, int val) | |||
159 | return -ENODEV; | 159 | return -ENODEV; |
160 | } | 160 | } |
161 | 161 | ||
162 | static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, | 162 | static int _omap_mux_get_by_name(struct omap_mux_partition *partition, |
163 | const char *muxname, | 163 | const char *muxname, |
164 | struct omap_mux **found_mux) | 164 | struct omap_mux **found_mux) |
165 | { | 165 | { |
166 | struct omap_mux *mux = NULL; | 166 | struct omap_mux *mux = NULL; |
167 | struct omap_mux_entry *e; | 167 | struct omap_mux_entry *e; |
@@ -218,7 +218,7 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, | |||
218 | return -ENODEV; | 218 | return -ENODEV; |
219 | } | 219 | } |
220 | 220 | ||
221 | static int __init | 221 | static int |
222 | omap_mux_get_by_name(const char *muxname, | 222 | omap_mux_get_by_name(const char *muxname, |
223 | struct omap_mux_partition **found_partition, | 223 | struct omap_mux_partition **found_partition, |
224 | struct omap_mux **found_mux) | 224 | struct omap_mux **found_mux) |
@@ -240,7 +240,7 @@ omap_mux_get_by_name(const char *muxname, | |||
240 | return -ENODEV; | 240 | return -ENODEV; |
241 | } | 241 | } |
242 | 242 | ||
243 | int __init omap_mux_init_signal(const char *muxname, int val) | 243 | int omap_mux_init_signal(const char *muxname, int val) |
244 | { | 244 | { |
245 | struct omap_mux_partition *partition = NULL; | 245 | struct omap_mux_partition *partition = NULL; |
246 | struct omap_mux *mux = NULL; | 246 | struct omap_mux *mux = NULL; |
@@ -1094,8 +1094,8 @@ static void omap_mux_init_package(struct omap_mux *superset, | |||
1094 | omap_mux_package_init_balls(package_balls, superset); | 1094 | omap_mux_package_init_balls(package_balls, superset); |
1095 | } | 1095 | } |
1096 | 1096 | ||
1097 | static void omap_mux_init_signals(struct omap_mux_partition *partition, | 1097 | static void __init omap_mux_init_signals(struct omap_mux_partition *partition, |
1098 | struct omap_board_mux *board_mux) | 1098 | struct omap_board_mux *board_mux) |
1099 | { | 1099 | { |
1100 | omap_mux_set_cmdline_signals(); | 1100 | omap_mux_set_cmdline_signals(); |
1101 | omap_mux_write_array(partition, board_mux); | 1101 | omap_mux_write_array(partition, board_mux); |
@@ -1109,8 +1109,8 @@ static void omap_mux_init_package(struct omap_mux *superset, | |||
1109 | { | 1109 | { |
1110 | } | 1110 | } |
1111 | 1111 | ||
1112 | static void omap_mux_init_signals(struct omap_mux_partition *partition, | 1112 | static void __init omap_mux_init_signals(struct omap_mux_partition *partition, |
1113 | struct omap_board_mux *board_mux) | 1113 | struct omap_board_mux *board_mux) |
1114 | { | 1114 | { |
1115 | } | 1115 | } |
1116 | 1116 | ||
diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index b13ef7ef5ef4..503ac777a2ba 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S | |||
@@ -18,6 +18,7 @@ | |||
18 | #include <linux/linkage.h> | 18 | #include <linux/linkage.h> |
19 | #include <linux/init.h> | 19 | #include <linux/init.h> |
20 | 20 | ||
21 | __CPUINIT | ||
21 | /* | 22 | /* |
22 | * OMAP4 specific entry point for secondary CPU to jump from ROM | 23 | * OMAP4 specific entry point for secondary CPU to jump from ROM |
23 | * code. This routine also provides a holding flag into which | 24 | * code. This routine also provides a holding flag into which |
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 40a8fbc07e4b..ebc595091312 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c | |||
@@ -24,6 +24,7 @@ | |||
24 | 24 | ||
25 | #include <plat/irqs.h> | 25 | #include <plat/irqs.h> |
26 | #include <plat/sram.h> | 26 | #include <plat/sram.h> |
27 | #include <plat/omap-secure.h> | ||
27 | 28 | ||
28 | #include <mach/hardware.h> | 29 | #include <mach/hardware.h> |
29 | #include <mach/omap-wakeupgen.h> | 30 | #include <mach/omap-wakeupgen.h> |
@@ -43,6 +44,9 @@ static void __iomem *sar_ram_base; | |||
43 | 44 | ||
44 | void __iomem *dram_sync, *sram_sync; | 45 | void __iomem *dram_sync, *sram_sync; |
45 | 46 | ||
47 | static phys_addr_t paddr; | ||
48 | static u32 size; | ||
49 | |||
46 | void omap_bus_sync(void) | 50 | void omap_bus_sync(void) |
47 | { | 51 | { |
48 | if (dram_sync && sram_sync) { | 52 | if (dram_sync && sram_sync) { |
@@ -52,18 +56,20 @@ void omap_bus_sync(void) | |||
52 | } | 56 | } |
53 | } | 57 | } |
54 | 58 | ||
55 | static int __init omap_barriers_init(void) | 59 | /* Steal one page physical memory for barrier implementation */ |
60 | int __init omap_barrier_reserve_memblock(void) | ||
56 | { | 61 | { |
57 | struct map_desc dram_io_desc[1]; | ||
58 | phys_addr_t paddr; | ||
59 | u32 size; | ||
60 | |||
61 | if (!cpu_is_omap44xx()) | ||
62 | return -ENODEV; | ||
63 | 62 | ||
64 | size = ALIGN(PAGE_SIZE, SZ_1M); | 63 | size = ALIGN(PAGE_SIZE, SZ_1M); |
65 | paddr = arm_memblock_steal(size, SZ_1M); | 64 | paddr = arm_memblock_steal(size, SZ_1M); |
66 | 65 | ||
66 | return 0; | ||
67 | } | ||
68 | |||
69 | void __init omap_barriers_init(void) | ||
70 | { | ||
71 | struct map_desc dram_io_desc[1]; | ||
72 | |||
67 | dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA; | 73 | dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA; |
68 | dram_io_desc[0].pfn = __phys_to_pfn(paddr); | 74 | dram_io_desc[0].pfn = __phys_to_pfn(paddr); |
69 | dram_io_desc[0].length = size; | 75 | dram_io_desc[0].length = size; |
@@ -75,9 +81,10 @@ static int __init omap_barriers_init(void) | |||
75 | pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n", | 81 | pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n", |
76 | (long long) paddr, dram_io_desc[0].virtual); | 82 | (long long) paddr, dram_io_desc[0].virtual); |
77 | 83 | ||
78 | return 0; | ||
79 | } | 84 | } |
80 | core_initcall(omap_barriers_init); | 85 | #else |
86 | void __init omap_barriers_init(void) | ||
87 | {} | ||
81 | #endif | 88 | #endif |
82 | 89 | ||
83 | void __init gic_init_irq(void) | 90 | void __init gic_init_irq(void) |
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 5192cabb40ed..eba6cd3816f5 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c | |||
@@ -1517,8 +1517,8 @@ static int _enable(struct omap_hwmod *oh) | |||
1517 | if (oh->_state != _HWMOD_STATE_INITIALIZED && | 1517 | if (oh->_state != _HWMOD_STATE_INITIALIZED && |
1518 | oh->_state != _HWMOD_STATE_IDLE && | 1518 | oh->_state != _HWMOD_STATE_IDLE && |
1519 | oh->_state != _HWMOD_STATE_DISABLED) { | 1519 | oh->_state != _HWMOD_STATE_DISABLED) { |
1520 | WARN(1, "omap_hwmod: %s: enabled state can only be entered " | 1520 | WARN(1, "omap_hwmod: %s: enabled state can only be entered from initialized, idle, or disabled state\n", |
1521 | "from initialized, idle, or disabled state\n", oh->name); | 1521 | oh->name); |
1522 | return -EINVAL; | 1522 | return -EINVAL; |
1523 | } | 1523 | } |
1524 | 1524 | ||
@@ -1600,8 +1600,8 @@ static int _idle(struct omap_hwmod *oh) | |||
1600 | pr_debug("omap_hwmod: %s: idling\n", oh->name); | 1600 | pr_debug("omap_hwmod: %s: idling\n", oh->name); |
1601 | 1601 | ||
1602 | if (oh->_state != _HWMOD_STATE_ENABLED) { | 1602 | if (oh->_state != _HWMOD_STATE_ENABLED) { |
1603 | WARN(1, "omap_hwmod: %s: idle state can only be entered from " | 1603 | WARN(1, "omap_hwmod: %s: idle state can only be entered from enabled state\n", |
1604 | "enabled state\n", oh->name); | 1604 | oh->name); |
1605 | return -EINVAL; | 1605 | return -EINVAL; |
1606 | } | 1606 | } |
1607 | 1607 | ||
@@ -1682,8 +1682,8 @@ static int _shutdown(struct omap_hwmod *oh) | |||
1682 | 1682 | ||
1683 | if (oh->_state != _HWMOD_STATE_IDLE && | 1683 | if (oh->_state != _HWMOD_STATE_IDLE && |
1684 | oh->_state != _HWMOD_STATE_ENABLED) { | 1684 | oh->_state != _HWMOD_STATE_ENABLED) { |
1685 | WARN(1, "omap_hwmod: %s: disabled state can only be entered " | 1685 | WARN(1, "omap_hwmod: %s: disabled state can only be entered from idle, or enabled state\n", |
1686 | "from idle, or enabled state\n", oh->name); | 1686 | oh->name); |
1687 | return -EINVAL; | 1687 | return -EINVAL; |
1688 | } | 1688 | } |
1689 | 1689 | ||
@@ -2240,8 +2240,8 @@ void omap_hwmod_ocp_barrier(struct omap_hwmod *oh) | |||
2240 | BUG_ON(!oh); | 2240 | BUG_ON(!oh); |
2241 | 2241 | ||
2242 | if (!oh->class->sysc || !oh->class->sysc->sysc_flags) { | 2242 | if (!oh->class->sysc || !oh->class->sysc->sysc_flags) { |
2243 | WARN(1, "omap_device: %s: OCP barrier impossible due to " | 2243 | WARN(1, "omap_device: %s: OCP barrier impossible due to device configuration\n", |
2244 | "device configuration\n", oh->name); | 2244 | oh->name); |
2245 | return; | 2245 | return; |
2246 | } | 2246 | } |
2247 | 2247 | ||
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c index c11273da5dcc..f08e442af397 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c | |||
@@ -56,27 +56,6 @@ struct omap_hwmod_class omap2_dss_hwmod_class = { | |||
56 | }; | 56 | }; |
57 | 57 | ||
58 | /* | 58 | /* |
59 | * 'dispc' class | ||
60 | * display controller | ||
61 | */ | ||
62 | |||
63 | static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = { | ||
64 | .rev_offs = 0x0000, | ||
65 | .sysc_offs = 0x0010, | ||
66 | .syss_offs = 0x0014, | ||
67 | .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | | ||
68 | SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), | ||
69 | .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | | ||
70 | MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), | ||
71 | .sysc_fields = &omap_hwmod_sysc_type1, | ||
72 | }; | ||
73 | |||
74 | struct omap_hwmod_class omap2_dispc_hwmod_class = { | ||
75 | .name = "dispc", | ||
76 | .sysc = &omap2_dispc_sysc, | ||
77 | }; | ||
78 | |||
79 | /* | ||
80 | * 'rfbi' class | 59 | * 'rfbi' class |
81 | * remote frame buffer interface | 60 | * remote frame buffer interface |
82 | */ | 61 | */ |
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index 177dee20faef..2a6729741b06 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c | |||
@@ -28,6 +28,28 @@ struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[] = { | |||
28 | { .name = "dispc", .dma_req = 5 }, | 28 | { .name = "dispc", .dma_req = 5 }, |
29 | { .dma_req = -1 } | 29 | { .dma_req = -1 } |
30 | }; | 30 | }; |
31 | |||
32 | /* | ||
33 | * 'dispc' class | ||
34 | * display controller | ||
35 | */ | ||
36 | |||
37 | static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = { | ||
38 | .rev_offs = 0x0000, | ||
39 | .sysc_offs = 0x0010, | ||
40 | .syss_offs = 0x0014, | ||
41 | .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | | ||
42 | SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), | ||
43 | .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | | ||
44 | MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), | ||
45 | .sysc_fields = &omap_hwmod_sysc_type1, | ||
46 | }; | ||
47 | |||
48 | struct omap_hwmod_class omap2_dispc_hwmod_class = { | ||
49 | .name = "dispc", | ||
50 | .sysc = &omap2_dispc_sysc, | ||
51 | }; | ||
52 | |||
31 | /* OMAP2xxx Timer Common */ | 53 | /* OMAP2xxx Timer Common */ |
32 | static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = { | 54 | static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = { |
33 | .rev_offs = 0x0000, | 55 | .rev_offs = 0x0000, |
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 5324e8d93bc0..3c8dd928628e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | |||
@@ -1480,6 +1480,28 @@ static struct omap_hwmod omap3xxx_dss_core_hwmod = { | |||
1480 | .masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters), | 1480 | .masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters), |
1481 | }; | 1481 | }; |
1482 | 1482 | ||
1483 | /* | ||
1484 | * 'dispc' class | ||
1485 | * display controller | ||
1486 | */ | ||
1487 | |||
1488 | static struct omap_hwmod_class_sysconfig omap3_dispc_sysc = { | ||
1489 | .rev_offs = 0x0000, | ||
1490 | .sysc_offs = 0x0010, | ||
1491 | .syss_offs = 0x0014, | ||
1492 | .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | | ||
1493 | SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | | ||
1494 | SYSC_HAS_ENAWAKEUP), | ||
1495 | .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | | ||
1496 | MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), | ||
1497 | .sysc_fields = &omap_hwmod_sysc_type1, | ||
1498 | }; | ||
1499 | |||
1500 | static struct omap_hwmod_class omap3_dispc_hwmod_class = { | ||
1501 | .name = "dispc", | ||
1502 | .sysc = &omap3_dispc_sysc, | ||
1503 | }; | ||
1504 | |||
1483 | /* l4_core -> dss_dispc */ | 1505 | /* l4_core -> dss_dispc */ |
1484 | static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dispc = { | 1506 | static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dispc = { |
1485 | .master = &omap3xxx_l4_core_hwmod, | 1507 | .master = &omap3xxx_l4_core_hwmod, |
@@ -1503,7 +1525,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dispc_slaves[] = { | |||
1503 | 1525 | ||
1504 | static struct omap_hwmod omap3xxx_dss_dispc_hwmod = { | 1526 | static struct omap_hwmod omap3xxx_dss_dispc_hwmod = { |
1505 | .name = "dss_dispc", | 1527 | .name = "dss_dispc", |
1506 | .class = &omap2_dispc_hwmod_class, | 1528 | .class = &omap3_dispc_hwmod_class, |
1507 | .mpu_irqs = omap2_dispc_irqs, | 1529 | .mpu_irqs = omap2_dispc_irqs, |
1508 | .main_clk = "dss1_alwon_fck", | 1530 | .main_clk = "dss1_alwon_fck", |
1509 | .prcm = { | 1531 | .prcm = { |
@@ -3523,12 +3545,6 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { | |||
3523 | &omap3xxx_uart2_hwmod, | 3545 | &omap3xxx_uart2_hwmod, |
3524 | &omap3xxx_uart3_hwmod, | 3546 | &omap3xxx_uart3_hwmod, |
3525 | 3547 | ||
3526 | /* dss class */ | ||
3527 | &omap3xxx_dss_dispc_hwmod, | ||
3528 | &omap3xxx_dss_dsi1_hwmod, | ||
3529 | &omap3xxx_dss_rfbi_hwmod, | ||
3530 | &omap3xxx_dss_venc_hwmod, | ||
3531 | |||
3532 | /* i2c class */ | 3548 | /* i2c class */ |
3533 | &omap3xxx_i2c1_hwmod, | 3549 | &omap3xxx_i2c1_hwmod, |
3534 | &omap3xxx_i2c2_hwmod, | 3550 | &omap3xxx_i2c2_hwmod, |
@@ -3635,6 +3651,15 @@ static __initdata struct omap_hwmod *am35xx_hwmods[] = { | |||
3635 | NULL | 3651 | NULL |
3636 | }; | 3652 | }; |
3637 | 3653 | ||
3654 | static __initdata struct omap_hwmod *omap3xxx_dss_hwmods[] = { | ||
3655 | /* dss class */ | ||
3656 | &omap3xxx_dss_dispc_hwmod, | ||
3657 | &omap3xxx_dss_dsi1_hwmod, | ||
3658 | &omap3xxx_dss_rfbi_hwmod, | ||
3659 | &omap3xxx_dss_venc_hwmod, | ||
3660 | NULL | ||
3661 | }; | ||
3662 | |||
3638 | int __init omap3xxx_hwmod_init(void) | 3663 | int __init omap3xxx_hwmod_init(void) |
3639 | { | 3664 | { |
3640 | int r; | 3665 | int r; |
@@ -3708,6 +3733,21 @@ int __init omap3xxx_hwmod_init(void) | |||
3708 | 3733 | ||
3709 | if (h) | 3734 | if (h) |
3710 | r = omap_hwmod_register(h); | 3735 | r = omap_hwmod_register(h); |
3736 | if (r < 0) | ||
3737 | return r; | ||
3738 | |||
3739 | /* | ||
3740 | * DSS code presumes that dss_core hwmod is handled first, | ||
3741 | * _before_ any other DSS related hwmods so register common | ||
3742 | * DSS hwmods last to ensure that dss_core is already registered. | ||
3743 | * Otherwise some change things may happen, for ex. if dispc | ||
3744 | * is handled before dss_core and DSS is enabled in bootloader | ||
3745 | * DIPSC will be reset with outputs enabled which sometimes leads | ||
3746 | * to unrecoverable L3 error. | ||
3747 | * XXX The long-term fix to this is to ensure modules are set up | ||
3748 | * in dependency order in the hwmod core code. | ||
3749 | */ | ||
3750 | r = omap_hwmod_register(omap3xxx_dss_hwmods); | ||
3711 | 3751 | ||
3712 | return r; | 3752 | return r; |
3713 | } | 3753 | } |
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index f9f151081760..ef0524c10a84 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c | |||
@@ -1031,6 +1031,7 @@ static struct omap_hwmod_dma_info omap44xx_dmic_sdma_reqs[] = { | |||
1031 | 1031 | ||
1032 | static struct omap_hwmod_addr_space omap44xx_dmic_addrs[] = { | 1032 | static struct omap_hwmod_addr_space omap44xx_dmic_addrs[] = { |
1033 | { | 1033 | { |
1034 | .name = "mpu", | ||
1034 | .pa_start = 0x4012e000, | 1035 | .pa_start = 0x4012e000, |
1035 | .pa_end = 0x4012e07f, | 1036 | .pa_end = 0x4012e07f, |
1036 | .flags = ADDR_TYPE_RT | 1037 | .flags = ADDR_TYPE_RT |
@@ -1049,6 +1050,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic = { | |||
1049 | 1050 | ||
1050 | static struct omap_hwmod_addr_space omap44xx_dmic_dma_addrs[] = { | 1051 | static struct omap_hwmod_addr_space omap44xx_dmic_dma_addrs[] = { |
1051 | { | 1052 | { |
1053 | .name = "dma", | ||
1052 | .pa_start = 0x4902e000, | 1054 | .pa_start = 0x4902e000, |
1053 | .pa_end = 0x4902e07f, | 1055 | .pa_end = 0x4902e07f, |
1054 | .flags = ADDR_TYPE_RT | 1056 | .flags = ADDR_TYPE_RT |
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 1881fe915149..5a65dd04aa38 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c | |||
@@ -174,14 +174,17 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, | |||
174 | freq = clk->rate; | 174 | freq = clk->rate; |
175 | clk_put(clk); | 175 | clk_put(clk); |
176 | 176 | ||
177 | rcu_read_lock(); | ||
177 | opp = opp_find_freq_ceil(dev, &freq); | 178 | opp = opp_find_freq_ceil(dev, &freq); |
178 | if (IS_ERR(opp)) { | 179 | if (IS_ERR(opp)) { |
180 | rcu_read_unlock(); | ||
179 | pr_err("%s: unable to find boot up OPP for vdd_%s\n", | 181 | pr_err("%s: unable to find boot up OPP for vdd_%s\n", |
180 | __func__, vdd_name); | 182 | __func__, vdd_name); |
181 | goto exit; | 183 | goto exit; |
182 | } | 184 | } |
183 | 185 | ||
184 | bootup_volt = opp_get_voltage(opp); | 186 | bootup_volt = opp_get_voltage(opp); |
187 | rcu_read_unlock(); | ||
185 | if (!bootup_volt) { | 188 | if (!bootup_volt) { |
186 | pr_err("%s: unable to find voltage corresponding " | 189 | pr_err("%s: unable to find voltage corresponding " |
187 | "to the bootup OPP for vdd_%s\n", __func__, vdd_name); | 190 | "to the bootup OPP for vdd_%s\n", __func__, vdd_name); |
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index b8822f8b2891..23de98d03841 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c | |||
@@ -82,13 +82,7 @@ static int omap2_fclks_active(void) | |||
82 | f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); | 82 | f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); |
83 | f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2); | 83 | f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2); |
84 | 84 | ||
85 | /* Ignore UART clocks. These are handled by UART core (serial.c) */ | 85 | return (f1 | f2) ? 1 : 0; |
86 | f1 &= ~(OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_UART2_MASK); | ||
87 | f2 &= ~OMAP24XX_EN_UART3_MASK; | ||
88 | |||
89 | if (f1 | f2) | ||
90 | return 1; | ||
91 | return 0; | ||
92 | } | 86 | } |
93 | 87 | ||
94 | static void omap2_enter_full_retention(void) | 88 | static void omap2_enter_full_retention(void) |
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index c1c4d86a79a8..9ce765407ad5 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c | |||
@@ -19,6 +19,7 @@ | |||
19 | #include "common.h" | 19 | #include "common.h" |
20 | #include <plat/cpu.h> | 20 | #include <plat/cpu.h> |
21 | #include <plat/prcm.h> | 21 | #include <plat/prcm.h> |
22 | #include <plat/irqs.h> | ||
22 | 23 | ||
23 | #include "vp.h" | 24 | #include "vp.h" |
24 | 25 | ||
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index 33dd655e6aab..a1d6154dc120 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c | |||
@@ -19,6 +19,7 @@ | |||
19 | 19 | ||
20 | #include "common.h" | 20 | #include "common.h" |
21 | #include <plat/cpu.h> | 21 | #include <plat/cpu.h> |
22 | #include <plat/irqs.h> | ||
22 | #include <plat/prcm.h> | 23 | #include <plat/prcm.h> |
23 | 24 | ||
24 | #include "vp.h" | 25 | #include "vp.h" |
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 247d89478f24..f590afc1f673 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c | |||
@@ -107,18 +107,18 @@ static void omap_uart_set_noidle(struct platform_device *pdev) | |||
107 | omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO); | 107 | omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO); |
108 | } | 108 | } |
109 | 109 | ||
110 | static void omap_uart_set_forceidle(struct platform_device *pdev) | 110 | static void omap_uart_set_smartidle(struct platform_device *pdev) |
111 | { | 111 | { |
112 | struct omap_device *od = to_omap_device(pdev); | 112 | struct omap_device *od = to_omap_device(pdev); |
113 | 113 | ||
114 | omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_FORCE); | 114 | omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_SMART); |
115 | } | 115 | } |
116 | 116 | ||
117 | #else | 117 | #else |
118 | static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable) | 118 | static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable) |
119 | {} | 119 | {} |
120 | static void omap_uart_set_noidle(struct platform_device *pdev) {} | 120 | static void omap_uart_set_noidle(struct platform_device *pdev) {} |
121 | static void omap_uart_set_forceidle(struct platform_device *pdev) {} | 121 | static void omap_uart_set_smartidle(struct platform_device *pdev) {} |
122 | #endif /* CONFIG_PM */ | 122 | #endif /* CONFIG_PM */ |
123 | 123 | ||
124 | #ifdef CONFIG_OMAP_MUX | 124 | #ifdef CONFIG_OMAP_MUX |
@@ -349,7 +349,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, | |||
349 | omap_up.uartclk = OMAP24XX_BASE_BAUD * 16; | 349 | omap_up.uartclk = OMAP24XX_BASE_BAUD * 16; |
350 | omap_up.flags = UPF_BOOT_AUTOCONF; | 350 | omap_up.flags = UPF_BOOT_AUTOCONF; |
351 | omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count; | 351 | omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count; |
352 | omap_up.set_forceidle = omap_uart_set_forceidle; | 352 | omap_up.set_forceidle = omap_uart_set_smartidle; |
353 | omap_up.set_noidle = omap_uart_set_noidle; | 353 | omap_up.set_noidle = omap_uart_set_noidle; |
354 | omap_up.enable_wakeup = omap_uart_enable_wakeup; | 354 | omap_up.enable_wakeup = omap_uart_enable_wakeup; |
355 | omap_up.dma_rx_buf_size = info->dma_rx_buf_size; | 355 | omap_up.dma_rx_buf_size = info->dma_rx_buf_size; |
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 9dd93453e563..7e755bb0ffc4 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c | |||
@@ -897,7 +897,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) | |||
897 | ret = sr_late_init(sr_info); | 897 | ret = sr_late_init(sr_info); |
898 | if (ret) { | 898 | if (ret) { |
899 | pr_warning("%s: Error in SR late init\n", __func__); | 899 | pr_warning("%s: Error in SR late init\n", __func__); |
900 | return ret; | 900 | goto err_iounmap; |
901 | } | 901 | } |
902 | } | 902 | } |
903 | 903 | ||
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 6eeff0e0ae01..5c9acea95761 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c | |||
@@ -270,7 +270,7 @@ static struct clocksource clocksource_gpt = { | |||
270 | static u32 notrace dmtimer_read_sched_clock(void) | 270 | static u32 notrace dmtimer_read_sched_clock(void) |
271 | { | 271 | { |
272 | if (clksrc.reserved) | 272 | if (clksrc.reserved) |
273 | return __omap_dm_timer_read_counter(clksrc.io_base, 1); | 273 | return __omap_dm_timer_read_counter(&clksrc, 1); |
274 | 274 | ||
275 | return 0; | 275 | return 0; |
276 | } | 276 | } |
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index 771dc781b746..f51348dafafd 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c | |||
@@ -486,7 +486,7 @@ static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) | |||
486 | void __init usbhs_init(const struct usbhs_omap_board_data *pdata) | 486 | void __init usbhs_init(const struct usbhs_omap_board_data *pdata) |
487 | { | 487 | { |
488 | struct omap_hwmod *oh[2]; | 488 | struct omap_hwmod *oh[2]; |
489 | struct omap_device *od; | 489 | struct platform_device *pdev; |
490 | int bus_id = -1; | 490 | int bus_id = -1; |
491 | int i; | 491 | int i; |
492 | 492 | ||
@@ -522,11 +522,11 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata) | |||
522 | return; | 522 | return; |
523 | } | 523 | } |
524 | 524 | ||
525 | od = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2, | 525 | pdev = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2, |
526 | (void *)&usbhs_data, sizeof(usbhs_data), | 526 | (void *)&usbhs_data, sizeof(usbhs_data), |
527 | omap_uhhtll_latency, | 527 | omap_uhhtll_latency, |
528 | ARRAY_SIZE(omap_uhhtll_latency), false); | 528 | ARRAY_SIZE(omap_uhhtll_latency), false); |
529 | if (IS_ERR(od)) { | 529 | if (IS_ERR(pdev)) { |
530 | pr_err("Could not build hwmod devices %s,%s\n", | 530 | pr_err("Could not build hwmod devices %s,%s\n", |
531 | USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME); | 531 | USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME); |
532 | return; | 532 | return; |
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 031d116fbf10..175b7d86d86a 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c | |||
@@ -247,7 +247,7 @@ static void __init omap4_vc_init_channel(struct voltagedomain *voltdm) | |||
247 | * omap_vc_i2c_init - initialize I2C interface to PMIC | 247 | * omap_vc_i2c_init - initialize I2C interface to PMIC |
248 | * @voltdm: voltage domain containing VC data | 248 | * @voltdm: voltage domain containing VC data |
249 | * | 249 | * |
250 | * Use PMIC supplied seetings for I2C high-speed mode and | 250 | * Use PMIC supplied settings for I2C high-speed mode and |
251 | * master code (if set) and program the VC I2C configuration | 251 | * master code (if set) and program the VC I2C configuration |
252 | * register. | 252 | * register. |
253 | * | 253 | * |
@@ -265,8 +265,8 @@ static void __init omap_vc_i2c_init(struct voltagedomain *voltdm) | |||
265 | 265 | ||
266 | if (initialized) { | 266 | if (initialized) { |
267 | if (voltdm->pmic->i2c_high_speed != i2c_high_speed) | 267 | if (voltdm->pmic->i2c_high_speed != i2c_high_speed) |
268 | pr_warn("%s: I2C config for all channels must match.", | 268 | pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).", |
269 | __func__); | 269 | __func__, voltdm->name, i2c_high_speed); |
270 | return; | 270 | return; |
271 | } | 271 | } |
272 | 272 | ||
@@ -292,9 +292,7 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) | |||
292 | u32 val; | 292 | u32 val; |
293 | 293 | ||
294 | if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) { | 294 | if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) { |
295 | pr_err("%s: PMIC info requried to configure vc for" | 295 | pr_err("%s: No PMIC info for vdd_%s\n", __func__, voltdm->name); |
296 | "vdd_%s not populated.Hence cannot initialize vc\n", | ||
297 | __func__, voltdm->name); | ||
298 | return; | 296 | return; |
299 | } | 297 | } |
300 | 298 | ||
diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index c005e2f5e383..57db2038b23c 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c | |||
@@ -108,6 +108,7 @@ void __init omap3xxx_voltagedomains_init(void) | |||
108 | * XXX Will depend on the process, validation, and binning | 108 | * XXX Will depend on the process, validation, and binning |
109 | * for the currently-running IC | 109 | * for the currently-running IC |
110 | */ | 110 | */ |
111 | #ifdef CONFIG_PM_OPP | ||
111 | if (cpu_is_omap3630()) { | 112 | if (cpu_is_omap3630()) { |
112 | omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data; | 113 | omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data; |
113 | omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data; | 114 | omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data; |
@@ -115,6 +116,7 @@ void __init omap3xxx_voltagedomains_init(void) | |||
115 | omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data; | 116 | omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data; |
116 | omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data; | 117 | omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data; |
117 | } | 118 | } |
119 | #endif | ||
118 | 120 | ||
119 | if (cpu_is_omap3517() || cpu_is_omap3505()) | 121 | if (cpu_is_omap3517() || cpu_is_omap3505()) |
120 | voltdms = voltagedomains_am35xx; | 122 | voltdms = voltagedomains_am35xx; |
diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c index 4e11d022595d..c3115f6853d4 100644 --- a/arch/arm/mach-omap2/voltagedomains44xx_data.c +++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c | |||
@@ -100,9 +100,11 @@ void __init omap44xx_voltagedomains_init(void) | |||
100 | * XXX Will depend on the process, validation, and binning | 100 | * XXX Will depend on the process, validation, and binning |
101 | * for the currently-running IC | 101 | * for the currently-running IC |
102 | */ | 102 | */ |
103 | #ifdef CONFIG_PM_OPP | ||
103 | omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data; | 104 | omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data; |
104 | omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data; | 105 | omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data; |
105 | omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data; | 106 | omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data; |
107 | #endif | ||
106 | 108 | ||
107 | for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++) | 109 | for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++) |
108 | voltdm->sys_clk.name = sys_clk_name; | 110 | voltdm->sys_clk.name = sys_clk_name; |
diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c index 807391d84a9d..0df88820978d 100644 --- a/arch/arm/mach-omap2/vp.c +++ b/arch/arm/mach-omap2/vp.c | |||
@@ -41,6 +41,11 @@ void __init omap_vp_init(struct voltagedomain *voltdm) | |||
41 | u32 val, sys_clk_rate, timeout, waittime; | 41 | u32 val, sys_clk_rate, timeout, waittime; |
42 | u32 vddmin, vddmax, vstepmin, vstepmax; | 42 | u32 vddmin, vddmax, vstepmin, vstepmax; |
43 | 43 | ||
44 | if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) { | ||
45 | pr_err("%s: No PMIC info for vdd_%s\n", __func__, voltdm->name); | ||
46 | return; | ||
47 | } | ||
48 | |||
44 | if (!voltdm->read || !voltdm->write) { | 49 | if (!voltdm->read || !voltdm->write) { |
45 | pr_err("%s: No read/write API for accessing vdd_%s regs\n", | 50 | pr_err("%s: No read/write API for accessing vdd_%s regs\n", |
46 | __func__, voltdm->name); | 51 | __func__, voltdm->name); |
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 0e28bae20bd4..5dad38ec00ea 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c | |||
@@ -29,6 +29,7 @@ | |||
29 | #include <mach/hardware.h> | 29 | #include <mach/hardware.h> |
30 | #include <mach/orion5x.h> | 30 | #include <mach/orion5x.h> |
31 | #include <plat/orion_nand.h> | 31 | #include <plat/orion_nand.h> |
32 | #include <plat/ehci-orion.h> | ||
32 | #include <plat/time.h> | 33 | #include <plat/time.h> |
33 | #include <plat/common.h> | 34 | #include <plat/common.h> |
34 | #include <plat/addr-map.h> | 35 | #include <plat/addr-map.h> |
@@ -72,7 +73,8 @@ void __init orion5x_map_io(void) | |||
72 | ****************************************************************************/ | 73 | ****************************************************************************/ |
73 | void __init orion5x_ehci0_init(void) | 74 | void __init orion5x_ehci0_init(void) |
74 | { | 75 | { |
75 | orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL); | 76 | orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL, |
77 | EHCI_PHY_ORION); | ||
76 | } | 78 | } |
77 | 79 | ||
78 | 80 | ||
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index fb9b62dcf4ca..208eef1c0485 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c | |||
@@ -45,6 +45,7 @@ | |||
45 | #include <mach/hx4700.h> | 45 | #include <mach/hx4700.h> |
46 | #include <mach/irda.h> | 46 | #include <mach/irda.h> |
47 | 47 | ||
48 | #include <sound/ak4641.h> | ||
48 | #include <video/platform_lcd.h> | 49 | #include <video/platform_lcd.h> |
49 | #include <video/w100fb.h> | 50 | #include <video/w100fb.h> |
50 | 51 | ||
@@ -765,6 +766,28 @@ static struct i2c_board_info __initdata pi2c_board_info[] = { | |||
765 | }; | 766 | }; |
766 | 767 | ||
767 | /* | 768 | /* |
769 | * Asahi Kasei AK4641 on I2C | ||
770 | */ | ||
771 | |||
772 | static struct ak4641_platform_data ak4641_info = { | ||
773 | .gpio_power = GPIO27_HX4700_CODEC_ON, | ||
774 | .gpio_npdn = GPIO109_HX4700_CODEC_nPDN, | ||
775 | }; | ||
776 | |||
777 | static struct i2c_board_info i2c_board_info[] __initdata = { | ||
778 | { | ||
779 | I2C_BOARD_INFO("ak4641", 0x12), | ||
780 | .platform_data = &ak4641_info, | ||
781 | }, | ||
782 | }; | ||
783 | |||
784 | static struct platform_device audio = { | ||
785 | .name = "hx4700-audio", | ||
786 | .id = -1, | ||
787 | }; | ||
788 | |||
789 | |||
790 | /* | ||
768 | * PCMCIA | 791 | * PCMCIA |
769 | */ | 792 | */ |
770 | 793 | ||
@@ -790,6 +813,7 @@ static struct platform_device *devices[] __initdata = { | |||
790 | &gpio_vbus, | 813 | &gpio_vbus, |
791 | &power_supply, | 814 | &power_supply, |
792 | &strataflash, | 815 | &strataflash, |
816 | &audio, | ||
793 | &pcmcia, | 817 | &pcmcia, |
794 | }; | 818 | }; |
795 | 819 | ||
@@ -827,6 +851,7 @@ static void __init hx4700_init(void) | |||
827 | pxa_set_ficp_info(&ficp_info); | 851 | pxa_set_ficp_info(&ficp_info); |
828 | pxa27x_set_i2c_power_info(NULL); | 852 | pxa27x_set_i2c_power_info(NULL); |
829 | pxa_set_i2c_info(NULL); | 853 | pxa_set_i2c_info(NULL); |
854 | i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info)); | ||
830 | i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info)); | 855 | i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info)); |
831 | pxa2xx_set_spi_info(2, &pxa_ssp2_master_info); | 856 | pxa2xx_set_spi_info(2, &pxa_ssp2_master_info); |
832 | spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info)); | 857 | spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info)); |
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 91e4f6c03766..00d6eacab8e4 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c | |||
@@ -25,7 +25,6 @@ | |||
25 | #include <linux/suspend.h> | 25 | #include <linux/suspend.h> |
26 | #include <linux/syscore_ops.h> | 26 | #include <linux/syscore_ops.h> |
27 | #include <linux/irq.h> | 27 | #include <linux/irq.h> |
28 | #include <linux/gpio.h> | ||
29 | 28 | ||
30 | #include <asm/mach/map.h> | 29 | #include <asm/mach/map.h> |
31 | #include <asm/suspend.h> | 30 | #include <asm/suspend.h> |
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index aed6cbcf3866..c1673b3441d4 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c | |||
@@ -22,7 +22,6 @@ | |||
22 | #include <linux/io.h> | 22 | #include <linux/io.h> |
23 | #include <linux/irq.h> | 23 | #include <linux/irq.h> |
24 | #include <linux/i2c/pxa-i2c.h> | 24 | #include <linux/i2c/pxa-i2c.h> |
25 | #include <linux/gpio.h> | ||
26 | 25 | ||
27 | #include <asm/mach/map.h> | 26 | #include <asm/mach/map.h> |
28 | #include <mach/hardware.h> | 27 | #include <mach/hardware.h> |
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c index febc809ed5a6..5aded5e6148f 100644 --- a/arch/arm/mach-pxa/saarb.c +++ b/arch/arm/mach-pxa/saarb.c | |||
@@ -15,7 +15,6 @@ | |||
15 | #include <linux/i2c.h> | 15 | #include <linux/i2c.h> |
16 | #include <linux/i2c/pxa-i2c.h> | 16 | #include <linux/i2c/pxa-i2c.h> |
17 | #include <linux/mfd/88pm860x.h> | 17 | #include <linux/mfd/88pm860x.h> |
18 | #include <linux/gpio.h> | ||
19 | 18 | ||
20 | #include <asm/mach-types.h> | 19 | #include <asm/mach-types.h> |
21 | #include <asm/mach/arch.h> | 20 | #include <asm/mach/arch.h> |
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 8d5168d253a9..30989baf7f2a 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c | |||
@@ -168,6 +168,7 @@ struct battery_thresh sharpsl_battery_levels_noac[] = { | |||
168 | #define MAXCTRL_SEL_SH 4 | 168 | #define MAXCTRL_SEL_SH 4 |
169 | #define MAXCTRL_STR (1u << 7) | 169 | #define MAXCTRL_STR (1u << 7) |
170 | 170 | ||
171 | extern int max1111_read_channel(int); | ||
171 | /* | 172 | /* |
172 | * Read MAX1111 ADC | 173 | * Read MAX1111 ADC |
173 | */ | 174 | */ |
@@ -177,8 +178,6 @@ int sharpsl_pm_pxa_read_max1111(int channel) | |||
177 | if (machine_is_tosa()) | 178 | if (machine_is_tosa()) |
178 | return 0; | 179 | return 0; |
179 | 180 | ||
180 | extern int max1111_read_channel(int); | ||
181 | |||
182 | /* max1111 accepts channels from 0-3, however, | 181 | /* max1111 accepts channels from 0-3, however, |
183 | * it is encoded from 0-7 here in the code. | 182 | * it is encoded from 0-7 here in the code. |
184 | */ | 183 | */ |
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 34cbdac51525..438f02fe122a 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c | |||
@@ -172,10 +172,9 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm) | |||
172 | static unsigned long spitz_charger_wakeup(void) | 172 | static unsigned long spitz_charger_wakeup(void) |
173 | { | 173 | { |
174 | unsigned long ret; | 174 | unsigned long ret; |
175 | ret = (!gpio_get_value(SPITZ_GPIO_KEY_INT) | 175 | ret = ((!gpio_get_value(SPITZ_GPIO_KEY_INT) |
176 | << GPIO_bit(SPITZ_GPIO_KEY_INT)) | 176 | << GPIO_bit(SPITZ_GPIO_KEY_INT)) |
177 | | (!gpio_get_value(SPITZ_GPIO_SYNC) | 177 | | gpio_get_value(SPITZ_GPIO_SYNC)); |
178 | << GPIO_bit(SPITZ_GPIO_SYNC)); | ||
179 | return ret; | 178 | return ret; |
180 | } | 179 | } |
181 | 180 | ||
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c index 7dc6c46b5e2b..5404535da1a5 100644 --- a/arch/arm/mach-s3c2410/cpu-freq.c +++ b/arch/arm/mach-s3c2410/cpu-freq.c | |||
@@ -115,7 +115,8 @@ static struct s3c_cpufreq_info s3c2410_cpufreq_info = { | |||
115 | .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), | 115 | .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), |
116 | }; | 116 | }; |
117 | 117 | ||
118 | static int s3c2410_cpufreq_add(struct device *dev) | 118 | static int s3c2410_cpufreq_add(struct device *dev, |
119 | struct subsys_interface *sif) | ||
119 | { | 120 | { |
120 | return s3c_cpufreq_register(&s3c2410_cpufreq_info); | 121 | return s3c_cpufreq_register(&s3c2410_cpufreq_info); |
121 | } | 122 | } |
@@ -133,7 +134,8 @@ static int __init s3c2410_cpufreq_init(void) | |||
133 | 134 | ||
134 | arch_initcall(s3c2410_cpufreq_init); | 135 | arch_initcall(s3c2410_cpufreq_init); |
135 | 136 | ||
136 | static int s3c2410a_cpufreq_add(struct device *dev) | 137 | static int s3c2410a_cpufreq_add(struct device *dev, |
138 | struct subsys_interface *sif) | ||
137 | { | 139 | { |
138 | /* alter the maximum freq settings for S3C2410A. If a board knows | 140 | /* alter the maximum freq settings for S3C2410A. If a board knows |
139 | * it only has a maximum of 200, then it should register its own | 141 | * it only has a maximum of 200, then it should register its own |
@@ -144,7 +146,7 @@ static int s3c2410a_cpufreq_add(struct device *dev) | |||
144 | s3c2410_cpufreq_info.max.pclk = 66500000; | 146 | s3c2410_cpufreq_info.max.pclk = 66500000; |
145 | s3c2410_cpufreq_info.name = "s3c2410a"; | 147 | s3c2410_cpufreq_info.name = "s3c2410a"; |
146 | 148 | ||
147 | return s3c2410_cpufreq_add(dev); | 149 | return s3c2410_cpufreq_add(dev, sif); |
148 | } | 150 | } |
149 | 151 | ||
150 | static struct subsys_interface s3c2410a_cpufreq_interface = { | 152 | static struct subsys_interface s3c2410a_cpufreq_interface = { |
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index 2afd00014a77..4803338cf56e 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c | |||
@@ -132,7 +132,8 @@ static struct s3c24xx_dma_order __initdata s3c2410_dma_order = { | |||
132 | }, | 132 | }, |
133 | }; | 133 | }; |
134 | 134 | ||
135 | static int __init s3c2410_dma_add(struct device *dev) | 135 | static int __init s3c2410_dma_add(struct device *dev, |
136 | struct subsys_interface *sif) | ||
136 | { | 137 | { |
137 | s3c2410_dma_init(); | 138 | s3c2410_dma_init(); |
138 | s3c24xx_dma_order_set(&s3c2410_dma_order); | 139 | s3c24xx_dma_order_set(&s3c2410_dma_order); |
@@ -148,7 +149,7 @@ static struct subsys_interface s3c2410_dma_interface = { | |||
148 | 149 | ||
149 | static int __init s3c2410_dma_drvinit(void) | 150 | static int __init s3c2410_dma_drvinit(void) |
150 | { | 151 | { |
151 | return subsys_interface_register(&s3c2410_interface); | 152 | return subsys_interface_register(&s3c2410_dma_interface); |
152 | } | 153 | } |
153 | 154 | ||
154 | arch_initcall(s3c2410_dma_drvinit); | 155 | arch_initcall(s3c2410_dma_drvinit); |
diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c2410/pll.c index c07438bfc99f..e0b3b347da82 100644 --- a/arch/arm/mach-s3c2410/pll.c +++ b/arch/arm/mach-s3c2410/pll.c | |||
@@ -66,7 +66,7 @@ static struct cpufreq_frequency_table pll_vals_12MHz[] = { | |||
66 | { .frequency = 270000000, .index = PLLVAL(127, 1, 1), }, | 66 | { .frequency = 270000000, .index = PLLVAL(127, 1, 1), }, |
67 | }; | 67 | }; |
68 | 68 | ||
69 | static int s3c2410_plls_add(struct device *dev) | 69 | static int s3c2410_plls_add(struct device *dev, struct subsys_interface *sif) |
70 | { | 70 | { |
71 | return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz)); | 71 | return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz)); |
72 | } | 72 | } |
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c index fda5385deff6..03f706dd6009 100644 --- a/arch/arm/mach-s3c2410/pm.c +++ b/arch/arm/mach-s3c2410/pm.c | |||
@@ -111,7 +111,7 @@ struct syscore_ops s3c2410_pm_syscore_ops = { | |||
111 | .resume = s3c2410_pm_resume, | 111 | .resume = s3c2410_pm_resume, |
112 | }; | 112 | }; |
113 | 113 | ||
114 | static int s3c2410_pm_add(struct device *dev) | 114 | static int s3c2410_pm_add(struct device *dev, struct subsys_interface *sif) |
115 | { | 115 | { |
116 | pm_cpu_prep = s3c2410_pm_prepare; | 116 | pm_cpu_prep = s3c2410_pm_prepare; |
117 | pm_cpu_sleep = s3c2410_cpu_suspend; | 117 | pm_cpu_sleep = s3c2410_cpu_suspend; |
diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c index d8664b7652ce..125be7d5fa60 100644 --- a/arch/arm/mach-s3c2412/cpu-freq.c +++ b/arch/arm/mach-s3c2412/cpu-freq.c | |||
@@ -194,7 +194,8 @@ static struct s3c_cpufreq_info s3c2412_cpufreq_info = { | |||
194 | .debug_io_show = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs), | 194 | .debug_io_show = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs), |
195 | }; | 195 | }; |
196 | 196 | ||
197 | static int s3c2412_cpufreq_add(struct device *dev) | 197 | static int s3c2412_cpufreq_add(struct device *dev, |
198 | struct subsys_interface *sif) | ||
198 | { | 199 | { |
199 | unsigned long fclk_rate; | 200 | unsigned long fclk_rate; |
200 | 201 | ||
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c index 142acd3b5e15..38472ac920ff 100644 --- a/arch/arm/mach-s3c2412/dma.c +++ b/arch/arm/mach-s3c2412/dma.c | |||
@@ -159,7 +159,8 @@ static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = { | |||
159 | .map_size = ARRAY_SIZE(s3c2412_dma_mappings), | 159 | .map_size = ARRAY_SIZE(s3c2412_dma_mappings), |
160 | }; | 160 | }; |
161 | 161 | ||
162 | static int __init s3c2412_dma_add(struct device *dev) | 162 | static int __init s3c2412_dma_add(struct device *dev, |
163 | struct subsys_interface *sif) | ||
163 | { | 164 | { |
164 | s3c2410_dma_init(); | 165 | s3c2410_dma_init(); |
165 | return s3c24xx_dma_init_map(&s3c2412_dma_sel); | 166 | return s3c24xx_dma_init_map(&s3c2412_dma_sel); |
diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c index a8a46c1644f4..e65619ddbccc 100644 --- a/arch/arm/mach-s3c2412/irq.c +++ b/arch/arm/mach-s3c2412/irq.c | |||
@@ -170,7 +170,7 @@ static int s3c2412_irq_rtc_wake(struct irq_data *data, unsigned int state) | |||
170 | 170 | ||
171 | static struct irq_chip s3c2412_irq_rtc_chip; | 171 | static struct irq_chip s3c2412_irq_rtc_chip; |
172 | 172 | ||
173 | static int s3c2412_irq_add(struct device *dev) | 173 | static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif) |
174 | { | 174 | { |
175 | unsigned int irqno; | 175 | unsigned int irqno; |
176 | 176 | ||
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c index d1adfa65f66d..d04588506ec4 100644 --- a/arch/arm/mach-s3c2412/pm.c +++ b/arch/arm/mach-s3c2412/pm.c | |||
@@ -56,7 +56,7 @@ static void s3c2412_pm_prepare(void) | |||
56 | { | 56 | { |
57 | } | 57 | } |
58 | 58 | ||
59 | static int s3c2412_pm_add(struct device *dev) | 59 | static int s3c2412_pm_add(struct device *dev, struct subsys_interface *sif) |
60 | { | 60 | { |
61 | pm_cpu_prep = s3c2412_pm_prepare; | 61 | pm_cpu_prep = s3c2412_pm_prepare; |
62 | pm_cpu_sleep = s3c2412_cpu_suspend; | 62 | pm_cpu_sleep = s3c2412_cpu_suspend; |
diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c index 36df761061de..fd49f35e448e 100644 --- a/arch/arm/mach-s3c2416/irq.c +++ b/arch/arm/mach-s3c2416/irq.c | |||
@@ -213,7 +213,8 @@ static int __init s3c2416_add_sub(unsigned int base, | |||
213 | return 0; | 213 | return 0; |
214 | } | 214 | } |
215 | 215 | ||
216 | static int __init s3c2416_irq_add(struct device *dev) | 216 | static int __init s3c2416_irq_add(struct device *dev, |
217 | struct subsys_interface *sif) | ||
217 | { | 218 | { |
218 | printk(KERN_INFO "S3C2416: IRQ Support\n"); | 219 | printk(KERN_INFO "S3C2416: IRQ Support\n"); |
219 | 220 | ||
diff --git a/arch/arm/mach-s3c2416/pm.c b/arch/arm/mach-s3c2416/pm.c index 3bdb15a0d419..1bd4817b8eb8 100644 --- a/arch/arm/mach-s3c2416/pm.c +++ b/arch/arm/mach-s3c2416/pm.c | |||
@@ -48,7 +48,7 @@ static void s3c2416_pm_prepare(void) | |||
48 | __raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1); | 48 | __raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1); |
49 | } | 49 | } |
50 | 50 | ||
51 | static int s3c2416_pm_add(struct device *dev) | 51 | static int s3c2416_pm_add(struct device *dev, struct subsys_interface *sif) |
52 | { | 52 | { |
53 | pm_cpu_prep = s3c2416_pm_prepare; | 53 | pm_cpu_prep = s3c2416_pm_prepare; |
54 | pm_cpu_sleep = s3c2416_cpu_suspend; | 54 | pm_cpu_sleep = s3c2416_cpu_suspend; |
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c index bedbc87a3426..414364eb426c 100644 --- a/arch/arm/mach-s3c2440/clock.c +++ b/arch/arm/mach-s3c2440/clock.c | |||
@@ -149,7 +149,7 @@ static struct clk_lookup s3c2440_clk_lookup[] = { | |||
149 | CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n), | 149 | CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n), |
150 | }; | 150 | }; |
151 | 151 | ||
152 | static int s3c2440_clk_add(struct device *dev) | 152 | static int s3c2440_clk_add(struct device *dev, struct subsys_interface *sif) |
153 | { | 153 | { |
154 | struct clk *clock_upll; | 154 | struct clk *clock_upll; |
155 | struct clk *clock_h; | 155 | struct clk *clock_h; |
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c index 15b1ddf8f626..5f0a0c8ef84f 100644 --- a/arch/arm/mach-s3c2440/dma.c +++ b/arch/arm/mach-s3c2440/dma.c | |||
@@ -174,7 +174,8 @@ static struct s3c24xx_dma_order __initdata s3c2440_dma_order = { | |||
174 | }, | 174 | }, |
175 | }; | 175 | }; |
176 | 176 | ||
177 | static int __init s3c2440_dma_add(struct device *dev) | 177 | static int __init s3c2440_dma_add(struct device *dev, |
178 | struct subsys_interface *sif) | ||
178 | { | 179 | { |
179 | s3c2410_dma_init(); | 180 | s3c2410_dma_init(); |
180 | s3c24xx_dma_order_set(&s3c2440_dma_order); | 181 | s3c24xx_dma_order_set(&s3c2440_dma_order); |
diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c index 4fee9bc6bcb5..4a18cde439cc 100644 --- a/arch/arm/mach-s3c2440/irq.c +++ b/arch/arm/mach-s3c2440/irq.c | |||
@@ -92,7 +92,7 @@ static struct irq_chip s3c_irq_wdtac97 = { | |||
92 | .irq_ack = s3c_irq_wdtac97_ack, | 92 | .irq_ack = s3c_irq_wdtac97_ack, |
93 | }; | 93 | }; |
94 | 94 | ||
95 | static int s3c2440_irq_add(struct device *dev) | 95 | static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif) |
96 | { | 96 | { |
97 | unsigned int irqno; | 97 | unsigned int irqno; |
98 | 98 | ||
diff --git a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c b/arch/arm/mach-s3c2440/s3c2440-cpufreq.c index cf7596694efe..61776764d9f4 100644 --- a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c +++ b/arch/arm/mach-s3c2440/s3c2440-cpufreq.c | |||
@@ -270,7 +270,8 @@ struct s3c_cpufreq_info s3c2440_cpufreq_info = { | |||
270 | .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), | 270 | .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), |
271 | }; | 271 | }; |
272 | 272 | ||
273 | static int s3c2440_cpufreq_add(struct device *dev) | 273 | static int s3c2440_cpufreq_add(struct device *dev, |
274 | struct subsys_interface *sif) | ||
274 | { | 275 | { |
275 | xtal = s3c_cpufreq_clk_get(NULL, "xtal"); | 276 | xtal = s3c_cpufreq_clk_get(NULL, "xtal"); |
276 | hclk = s3c_cpufreq_clk_get(NULL, "hclk"); | 277 | hclk = s3c_cpufreq_clk_get(NULL, "hclk"); |
diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c index b5368ae8d7fe..551fb433be87 100644 --- a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c +++ b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c | |||
@@ -51,7 +51,7 @@ static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = { | |||
51 | { .frequency = 400000000, .index = PLLVAL(0x5c, 1, 1), }, /* FVco 800.000000 */ | 51 | { .frequency = 400000000, .index = PLLVAL(0x5c, 1, 1), }, /* FVco 800.000000 */ |
52 | }; | 52 | }; |
53 | 53 | ||
54 | static int s3c2440_plls12_add(struct device *dev) | 54 | static int s3c2440_plls12_add(struct device *dev, struct subsys_interface *sif) |
55 | { | 55 | { |
56 | struct clk *xtal_clk; | 56 | struct clk *xtal_clk; |
57 | unsigned long xtal; | 57 | unsigned long xtal; |
diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c index 42f2b5cd2399..3f15bcf64290 100644 --- a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c +++ b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c | |||
@@ -79,7 +79,8 @@ static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = { | |||
79 | { .frequency = 402192000, .index = PLLVAL(87, 2, 1), }, /* FVco 804.384000 */ | 79 | { .frequency = 402192000, .index = PLLVAL(87, 2, 1), }, /* FVco 804.384000 */ |
80 | }; | 80 | }; |
81 | 81 | ||
82 | static int s3c2440_plls169344_add(struct device *dev) | 82 | static int s3c2440_plls169344_add(struct device *dev, |
83 | struct subsys_interface *sif) | ||
83 | { | 84 | { |
84 | struct clk *xtal_clk; | 85 | struct clk *xtal_clk; |
85 | unsigned long xtal; | 86 | unsigned long xtal; |
diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c index 8004e0497bf4..22cb7c94a8c8 100644 --- a/arch/arm/mach-s3c2440/s3c2442.c +++ b/arch/arm/mach-s3c2440/s3c2442.c | |||
@@ -122,7 +122,7 @@ static struct clk s3c2442_clk_cam_upll = { | |||
122 | }, | 122 | }, |
123 | }; | 123 | }; |
124 | 124 | ||
125 | static int s3c2442_clk_add(struct device *dev) | 125 | static int s3c2442_clk_add(struct device *dev, struct subsys_interface *sif) |
126 | { | 126 | { |
127 | struct clk *clock_upll; | 127 | struct clk *clock_upll; |
128 | struct clk *clock_h; | 128 | struct clk *clock_h; |
diff --git a/arch/arm/mach-s3c2440/s3c244x-clock.c b/arch/arm/mach-s3c2440/s3c244x-clock.c index b3fdbdda3d5f..6d9b688c442b 100644 --- a/arch/arm/mach-s3c2440/s3c244x-clock.c +++ b/arch/arm/mach-s3c2440/s3c244x-clock.c | |||
@@ -72,7 +72,7 @@ static struct clk clk_arm = { | |||
72 | }, | 72 | }, |
73 | }; | 73 | }; |
74 | 74 | ||
75 | static int s3c244x_clk_add(struct device *dev) | 75 | static int s3c244x_clk_add(struct device *dev, struct subsys_interface *sif) |
76 | { | 76 | { |
77 | unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); | 77 | unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); |
78 | unsigned long clkdivn; | 78 | unsigned long clkdivn; |
diff --git a/arch/arm/mach-s3c2440/s3c244x-irq.c b/arch/arm/mach-s3c2440/s3c244x-irq.c index 74d3dcf46a48..5fe8e58d3afd 100644 --- a/arch/arm/mach-s3c2440/s3c244x-irq.c +++ b/arch/arm/mach-s3c2440/s3c244x-irq.c | |||
@@ -91,7 +91,7 @@ static struct irq_chip s3c_irq_cam = { | |||
91 | .irq_ack = s3c_irq_cam_ack, | 91 | .irq_ack = s3c_irq_cam_ack, |
92 | }; | 92 | }; |
93 | 93 | ||
94 | static int s3c244x_irq_add(struct device *dev) | 94 | static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif) |
95 | { | 95 | { |
96 | unsigned int irqno; | 96 | unsigned int irqno; |
97 | 97 | ||
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c index de6b4a23c9ed..14224517e621 100644 --- a/arch/arm/mach-s3c2443/dma.c +++ b/arch/arm/mach-s3c2443/dma.c | |||
@@ -135,7 +135,8 @@ static struct s3c24xx_dma_selection __initdata s3c2443_dma_sel = { | |||
135 | .map_size = ARRAY_SIZE(s3c2443_dma_mappings), | 135 | .map_size = ARRAY_SIZE(s3c2443_dma_mappings), |
136 | }; | 136 | }; |
137 | 137 | ||
138 | static int __init s3c2443_dma_add(struct device *dev) | 138 | static int __init s3c2443_dma_add(struct device *dev, |
139 | struct subsys_interface *sif) | ||
139 | { | 140 | { |
140 | s3c24xx_dma_init(6, IRQ_S3C2443_DMA0, 0x100); | 141 | s3c24xx_dma_init(6, IRQ_S3C2443_DMA0, 0x100); |
141 | return s3c24xx_dma_init_map(&s3c2443_dma_sel); | 142 | return s3c24xx_dma_init_map(&s3c2443_dma_sel); |
diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c index 35e4ff24fb43..ac2829f56d12 100644 --- a/arch/arm/mach-s3c2443/irq.c +++ b/arch/arm/mach-s3c2443/irq.c | |||
@@ -241,7 +241,8 @@ static int __init s3c2443_add_sub(unsigned int base, | |||
241 | return 0; | 241 | return 0; |
242 | } | 242 | } |
243 | 243 | ||
244 | static int __init s3c2443_irq_add(struct device *dev) | 244 | static int __init s3c2443_irq_add(struct device *dev, |
245 | struct subsys_interface *sif) | ||
245 | { | 246 | { |
246 | printk("S3C2443: IRQ Support\n"); | 247 | printk("S3C2443: IRQ Support\n"); |
247 | 248 | ||
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index 31bb27dc4aeb..aebbcc291b4e 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c | |||
@@ -138,6 +138,11 @@ static struct clk init_clocks_off[] = { | |||
138 | .ctrlbit = S3C_CLKCON_PCLK_TSADC, | 138 | .ctrlbit = S3C_CLKCON_PCLK_TSADC, |
139 | }, { | 139 | }, { |
140 | .name = "i2c", | 140 | .name = "i2c", |
141 | #ifdef CONFIG_S3C_DEV_I2C1 | ||
142 | .devname = "s3c2440-i2c.0", | ||
143 | #else | ||
144 | .devname = "s3c2440-i2c", | ||
145 | #endif | ||
141 | .parent = &clk_p, | 146 | .parent = &clk_p, |
142 | .enable = s3c64xx_pclk_ctrl, | 147 | .enable = s3c64xx_pclk_ctrl, |
143 | .ctrlbit = S3C_CLKCON_PCLK_IIC, | 148 | .ctrlbit = S3C_CLKCON_PCLK_IIC, |
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c index 4a7394d4bd9e..bee7dcd4df7c 100644 --- a/arch/arm/mach-s3c64xx/common.c +++ b/arch/arm/mach-s3c64xx/common.c | |||
@@ -49,7 +49,7 @@ | |||
49 | 49 | ||
50 | /* uart registration process */ | 50 | /* uart registration process */ |
51 | 51 | ||
52 | void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) | 52 | static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) |
53 | { | 53 | { |
54 | s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no); | 54 | s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no); |
55 | } | 55 | } |
diff --git a/arch/arm/mach-s5p64x0/pm.c b/arch/arm/mach-s5p64x0/pm.c index 23f9b22439c9..9cba18bfe47b 100644 --- a/arch/arm/mach-s5p64x0/pm.c +++ b/arch/arm/mach-s5p64x0/pm.c | |||
@@ -160,7 +160,7 @@ static void s5p64x0_pm_prepare(void) | |||
160 | 160 | ||
161 | } | 161 | } |
162 | 162 | ||
163 | static int s5p64x0_pm_add(struct device *dev) | 163 | static int s5p64x0_pm_add(struct device *dev, struct subsys_interface *sif) |
164 | { | 164 | { |
165 | pm_cpu_prep = s5p64x0_pm_prepare; | 165 | pm_cpu_prep = s5p64x0_pm_prepare; |
166 | pm_cpu_sleep = s5p64x0_cpu_suspend; | 166 | pm_cpu_sleep = s5p64x0_cpu_suspend; |
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index c78dfddd77fd..b9ec0c35379f 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c | |||
@@ -175,7 +175,7 @@ static int s5pv210_clk_mask1_ctrl(struct clk *clk, int enable) | |||
175 | return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable); | 175 | return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable); |
176 | } | 176 | } |
177 | 177 | ||
178 | static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable) | 178 | static int s5pv210_clk_hdmiphy_ctrl(struct clk *clk, int enable) |
179 | { | 179 | { |
180 | return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable); | 180 | return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable); |
181 | } | 181 | } |
@@ -372,7 +372,7 @@ static struct clk init_clocks_off[] = { | |||
372 | }, { | 372 | }, { |
373 | .name = "hdmiphy", | 373 | .name = "hdmiphy", |
374 | .devname = "s5pv210-hdmi", | 374 | .devname = "s5pv210-hdmi", |
375 | .enable = exynos4_clk_hdmiphy_ctrl, | 375 | .enable = s5pv210_clk_hdmiphy_ctrl, |
376 | .ctrlbit = (1 << 0), | 376 | .ctrlbit = (1 << 0), |
377 | }, { | 377 | }, { |
378 | .name = "dacphy", | 378 | .name = "dacphy", |
diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c index 677c71c41e50..736bfb103cbc 100644 --- a/arch/arm/mach-s5pv210/pm.c +++ b/arch/arm/mach-s5pv210/pm.c | |||
@@ -133,7 +133,7 @@ static void s5pv210_pm_prepare(void) | |||
133 | s3c_pm_do_save(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save)); | 133 | s3c_pm_do_save(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save)); |
134 | } | 134 | } |
135 | 135 | ||
136 | static int s5pv210_pm_add(struct device *dev) | 136 | static int s5pv210_pm_add(struct device *dev, struct subsys_interface *sif) |
137 | { | 137 | { |
138 | pm_cpu_prep = s5pv210_pm_prepare; | 138 | pm_cpu_prep = s5pv210_pm_prepare; |
139 | pm_cpu_sleep = s5pv210_cpu_suspend; | 139 | pm_cpu_sleep = s5pv210_cpu_suspend; |
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index eff8a96c75ee..068b754bc348 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c | |||
@@ -30,6 +30,7 @@ | |||
30 | #include <linux/serial_sci.h> | 30 | #include <linux/serial_sci.h> |
31 | #include <linux/smsc911x.h> | 31 | #include <linux/smsc911x.h> |
32 | #include <linux/gpio.h> | 32 | #include <linux/gpio.h> |
33 | #include <linux/videodev2.h> | ||
33 | #include <linux/input.h> | 34 | #include <linux/input.h> |
34 | #include <linux/input/sh_keysc.h> | 35 | #include <linux/input/sh_keysc.h> |
35 | #include <linux/mmc/host.h> | 36 | #include <linux/mmc/host.h> |
@@ -37,7 +38,6 @@ | |||
37 | #include <linux/mmc/sh_mobile_sdhi.h> | 38 | #include <linux/mmc/sh_mobile_sdhi.h> |
38 | #include <linux/mfd/tmio.h> | 39 | #include <linux/mfd/tmio.h> |
39 | #include <linux/sh_clk.h> | 40 | #include <linux/sh_clk.h> |
40 | #include <linux/dma-mapping.h> | ||
41 | #include <video/sh_mobile_lcdc.h> | 41 | #include <video/sh_mobile_lcdc.h> |
42 | #include <video/sh_mipi_dsi.h> | 42 | #include <video/sh_mipi_dsi.h> |
43 | #include <sound/sh_fsi.h> | 43 | #include <sound/sh_fsi.h> |
@@ -159,19 +159,12 @@ static struct resource sh_mmcif_resources[] = { | |||
159 | }, | 159 | }, |
160 | }; | 160 | }; |
161 | 161 | ||
162 | static struct sh_mmcif_dma sh_mmcif_dma = { | ||
163 | .chan_priv_rx = { | ||
164 | .slave_id = SHDMA_SLAVE_MMCIF_RX, | ||
165 | }, | ||
166 | .chan_priv_tx = { | ||
167 | .slave_id = SHDMA_SLAVE_MMCIF_TX, | ||
168 | }, | ||
169 | }; | ||
170 | static struct sh_mmcif_plat_data sh_mmcif_platdata = { | 162 | static struct sh_mmcif_plat_data sh_mmcif_platdata = { |
171 | .sup_pclk = 0, | 163 | .sup_pclk = 0, |
172 | .ocr = MMC_VDD_165_195, | 164 | .ocr = MMC_VDD_165_195, |
173 | .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, | 165 | .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, |
174 | .dma = &sh_mmcif_dma, | 166 | .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, |
167 | .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, | ||
175 | }; | 168 | }; |
176 | 169 | ||
177 | static struct platform_device mmc_device = { | 170 | static struct platform_device mmc_device = { |
@@ -321,12 +314,11 @@ static struct resource mipidsi0_resources[] = { | |||
321 | }, | 314 | }, |
322 | }; | 315 | }; |
323 | 316 | ||
324 | #define DSI0PHYCR 0xe615006c | ||
325 | static int sh_mipi_set_dot_clock(struct platform_device *pdev, | 317 | static int sh_mipi_set_dot_clock(struct platform_device *pdev, |
326 | void __iomem *base, | 318 | void __iomem *base, |
327 | int enable) | 319 | int enable) |
328 | { | 320 | { |
329 | struct clk *pck; | 321 | struct clk *pck, *phy; |
330 | int ret; | 322 | int ret; |
331 | 323 | ||
332 | pck = clk_get(&pdev->dev, "dsip_clk"); | 324 | pck = clk_get(&pdev->dev, "dsip_clk"); |
@@ -335,18 +327,27 @@ static int sh_mipi_set_dot_clock(struct platform_device *pdev, | |||
335 | goto sh_mipi_set_dot_clock_pck_err; | 327 | goto sh_mipi_set_dot_clock_pck_err; |
336 | } | 328 | } |
337 | 329 | ||
330 | phy = clk_get(&pdev->dev, "dsiphy_clk"); | ||
331 | if (IS_ERR(phy)) { | ||
332 | ret = PTR_ERR(phy); | ||
333 | goto sh_mipi_set_dot_clock_phy_err; | ||
334 | } | ||
335 | |||
338 | if (enable) { | 336 | if (enable) { |
339 | clk_set_rate(pck, clk_round_rate(pck, 24000000)); | 337 | clk_set_rate(pck, clk_round_rate(pck, 24000000)); |
340 | __raw_writel(0x2a809010, DSI0PHYCR); | 338 | clk_set_rate(phy, clk_round_rate(pck, 510000000)); |
341 | clk_enable(pck); | 339 | clk_enable(pck); |
340 | clk_enable(phy); | ||
342 | } else { | 341 | } else { |
343 | clk_disable(pck); | 342 | clk_disable(pck); |
343 | clk_disable(phy); | ||
344 | } | 344 | } |
345 | 345 | ||
346 | ret = 0; | 346 | ret = 0; |
347 | 347 | ||
348 | clk_put(phy); | ||
349 | sh_mipi_set_dot_clock_phy_err: | ||
348 | clk_put(pck); | 350 | clk_put(pck); |
349 | |||
350 | sh_mipi_set_dot_clock_pck_err: | 351 | sh_mipi_set_dot_clock_pck_err: |
351 | return ret; | 352 | return ret; |
352 | } | 353 | } |
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index aab0a349f759..eeb4d9664584 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c | |||
@@ -295,15 +295,6 @@ static struct resource sh_mmcif_resources[] = { | |||
295 | }, | 295 | }, |
296 | }; | 296 | }; |
297 | 297 | ||
298 | static struct sh_mmcif_dma sh_mmcif_dma = { | ||
299 | .chan_priv_rx = { | ||
300 | .slave_id = SHDMA_SLAVE_MMCIF_RX, | ||
301 | }, | ||
302 | .chan_priv_tx = { | ||
303 | .slave_id = SHDMA_SLAVE_MMCIF_TX, | ||
304 | }, | ||
305 | }; | ||
306 | |||
307 | static struct sh_mmcif_plat_data sh_mmcif_plat = { | 298 | static struct sh_mmcif_plat_data sh_mmcif_plat = { |
308 | .sup_pclk = 0, | 299 | .sup_pclk = 0, |
309 | .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, | 300 | .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, |
@@ -311,7 +302,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = { | |||
311 | MMC_CAP_8_BIT_DATA | | 302 | MMC_CAP_8_BIT_DATA | |
312 | MMC_CAP_NEEDS_POLL, | 303 | MMC_CAP_NEEDS_POLL, |
313 | .get_cd = slot_cn7_get_cd, | 304 | .get_cd = slot_cn7_get_cd, |
314 | .dma = &sh_mmcif_dma, | 305 | .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, |
306 | .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, | ||
315 | }; | 307 | }; |
316 | 308 | ||
317 | static struct platform_device sh_mmcif_device = { | 309 | static struct platform_device sh_mmcif_device = { |
diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index 857ceeec1bb0..c8e7ca23fc06 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c | |||
@@ -143,11 +143,10 @@ static struct gpio_keys_button gpio_buttons[] = { | |||
143 | static struct gpio_keys_platform_data gpio_key_info = { | 143 | static struct gpio_keys_platform_data gpio_key_info = { |
144 | .buttons = gpio_buttons, | 144 | .buttons = gpio_buttons, |
145 | .nbuttons = ARRAY_SIZE(gpio_buttons), | 145 | .nbuttons = ARRAY_SIZE(gpio_buttons), |
146 | .poll_interval = 250, /* polled for now */ | ||
147 | }; | 146 | }; |
148 | 147 | ||
149 | static struct platform_device gpio_keys_device = { | 148 | static struct platform_device gpio_keys_device = { |
150 | .name = "gpio-keys-polled", /* polled for now */ | 149 | .name = "gpio-keys", |
151 | .id = -1, | 150 | .id = -1, |
152 | .dev = { | 151 | .dev = { |
153 | .platform_data = &gpio_key_info, | 152 | .platform_data = &gpio_key_info, |
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 9b42fbd10f8e..a2813247b455 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c | |||
@@ -43,7 +43,6 @@ | |||
43 | #include <linux/smsc911x.h> | 43 | #include <linux/smsc911x.h> |
44 | #include <linux/sh_intc.h> | 44 | #include <linux/sh_intc.h> |
45 | #include <linux/tca6416_keypad.h> | 45 | #include <linux/tca6416_keypad.h> |
46 | #include <linux/usb/r8a66597.h> | ||
47 | #include <linux/usb/renesas_usbhs.h> | 46 | #include <linux/usb/renesas_usbhs.h> |
48 | #include <linux/dma-mapping.h> | 47 | #include <linux/dma-mapping.h> |
49 | 48 | ||
@@ -145,11 +144,6 @@ | |||
145 | * 1-2 short | VBUS 5V | Host | 144 | * 1-2 short | VBUS 5V | Host |
146 | * open | external VBUS | Function | 145 | * open | external VBUS | Function |
147 | * | 146 | * |
148 | * *1 | ||
149 | * CN31 is used as | ||
150 | * CONFIG_USB_R8A66597_HCD Host | ||
151 | * CONFIG_USB_RENESAS_USBHS Function | ||
152 | * | ||
153 | * CAUTION | 147 | * CAUTION |
154 | * | 148 | * |
155 | * renesas_usbhs driver can use external interrupt mode | 149 | * renesas_usbhs driver can use external interrupt mode |
@@ -161,15 +155,6 @@ | |||
161 | * mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0", | 155 | * mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0", |
162 | * because Touchscreen is using IRQ7-PORT40. | 156 | * because Touchscreen is using IRQ7-PORT40. |
163 | * It is impossible to use IRQ7 demux on this board. | 157 | * It is impossible to use IRQ7 demux on this board. |
164 | * | ||
165 | * We can use external interrupt mode USB-Function on "USB1". | ||
166 | * USB1 can become Host by r8a66597, and become Function by renesas_usbhs. | ||
167 | * But don't select both drivers in same time. | ||
168 | * These uses same IRQ number for request_irq(), and aren't supporting | ||
169 | * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE. | ||
170 | * | ||
171 | * Actually these are old/new version of USB driver. | ||
172 | * This mean its register will be broken if it supports shared IRQ, | ||
173 | */ | 158 | */ |
174 | 159 | ||
175 | /* | 160 | /* |
@@ -208,6 +193,16 @@ | |||
208 | */ | 193 | */ |
209 | 194 | ||
210 | /* | 195 | /* |
196 | * FSI - AK4642 | ||
197 | * | ||
198 | * it needs amixer settings for playing | ||
199 | * | ||
200 | * amixer set "Headphone" on | ||
201 | * amixer set "HPOUTL Mixer DACH" on | ||
202 | * amixer set "HPOUTR Mixer DACH" on | ||
203 | */ | ||
204 | |||
205 | /* | ||
211 | * FIXME !! | 206 | * FIXME !! |
212 | * | 207 | * |
213 | * gpio_no_direction | 208 | * gpio_no_direction |
@@ -676,51 +671,16 @@ static struct platform_device usbhs0_device = { | |||
676 | * Use J30 to select between Host and Function. This setting | 671 | * Use J30 to select between Host and Function. This setting |
677 | * can however not be detected by software. Hotplug of USBHS1 | 672 | * can however not be detected by software. Hotplug of USBHS1 |
678 | * is provided via IRQ8. | 673 | * is provided via IRQ8. |
674 | * | ||
675 | * Current USB1 works as "USB Host". | ||
676 | * - set J30 "short" | ||
677 | * | ||
678 | * If you want to use it as "USB gadget", | ||
679 | * - J30 "open" | ||
680 | * - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET | ||
681 | * - add .get_vbus = usbhs_get_vbus in usbhs1_private | ||
679 | */ | 682 | */ |
680 | #define IRQ8 evt2irq(0x0300) | 683 | #define IRQ8 evt2irq(0x0300) |
681 | |||
682 | /* USBHS1 USB Host support via r8a66597_hcd */ | ||
683 | static void usb1_host_port_power(int port, int power) | ||
684 | { | ||
685 | if (!power) /* only power-on is supported for now */ | ||
686 | return; | ||
687 | |||
688 | /* set VBOUT/PWEN and EXTLP1 in DVSTCTR */ | ||
689 | __raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008); | ||
690 | } | ||
691 | |||
692 | static struct r8a66597_platdata usb1_host_data = { | ||
693 | .on_chip = 1, | ||
694 | .port_power = usb1_host_port_power, | ||
695 | }; | ||
696 | |||
697 | static struct resource usb1_host_resources[] = { | ||
698 | [0] = { | ||
699 | .name = "USBHS1", | ||
700 | .start = 0xe68b0000, | ||
701 | .end = 0xe68b00e6 - 1, | ||
702 | .flags = IORESOURCE_MEM, | ||
703 | }, | ||
704 | [1] = { | ||
705 | .start = evt2irq(0x1ce0) /* USB1_USB1I0 */, | ||
706 | .flags = IORESOURCE_IRQ, | ||
707 | }, | ||
708 | }; | ||
709 | |||
710 | static struct platform_device usb1_host_device = { | ||
711 | .name = "r8a66597_hcd", | ||
712 | .id = 1, | ||
713 | .dev = { | ||
714 | .dma_mask = NULL, /* not use dma */ | ||
715 | .coherent_dma_mask = 0xffffffff, | ||
716 | .platform_data = &usb1_host_data, | ||
717 | }, | ||
718 | .num_resources = ARRAY_SIZE(usb1_host_resources), | ||
719 | .resource = usb1_host_resources, | ||
720 | }; | ||
721 | |||
722 | /* USBHS1 USB Function support via renesas_usbhs */ | ||
723 | |||
724 | #define USB_PHY_MODE (1 << 4) | 684 | #define USB_PHY_MODE (1 << 4) |
725 | #define USB_PHY_INT_EN ((1 << 3) | (1 << 2)) | 685 | #define USB_PHY_INT_EN ((1 << 3) | (1 << 2)) |
726 | #define USB_PHY_ON (1 << 1) | 686 | #define USB_PHY_ON (1 << 1) |
@@ -776,7 +736,7 @@ static void usbhs1_hardware_exit(struct platform_device *pdev) | |||
776 | 736 | ||
777 | static int usbhs1_get_id(struct platform_device *pdev) | 737 | static int usbhs1_get_id(struct platform_device *pdev) |
778 | { | 738 | { |
779 | return USBHS_GADGET; | 739 | return USBHS_HOST; |
780 | } | 740 | } |
781 | 741 | ||
782 | static u32 usbhs1_pipe_cfg[] = { | 742 | static u32 usbhs1_pipe_cfg[] = { |
@@ -807,7 +767,6 @@ static struct usbhs_private usbhs1_private = { | |||
807 | .hardware_exit = usbhs1_hardware_exit, | 767 | .hardware_exit = usbhs1_hardware_exit, |
808 | .get_id = usbhs1_get_id, | 768 | .get_id = usbhs1_get_id, |
809 | .phy_reset = usbhs_phy_reset, | 769 | .phy_reset = usbhs_phy_reset, |
810 | .get_vbus = usbhs_get_vbus, | ||
811 | }, | 770 | }, |
812 | .driver_param = { | 771 | .driver_param = { |
813 | .buswait_bwait = 4, | 772 | .buswait_bwait = 4, |
@@ -1184,15 +1143,6 @@ static struct resource sh_mmcif_resources[] = { | |||
1184 | }, | 1143 | }, |
1185 | }; | 1144 | }; |
1186 | 1145 | ||
1187 | static struct sh_mmcif_dma sh_mmcif_dma = { | ||
1188 | .chan_priv_rx = { | ||
1189 | .slave_id = SHDMA_SLAVE_MMCIF_RX, | ||
1190 | }, | ||
1191 | .chan_priv_tx = { | ||
1192 | .slave_id = SHDMA_SLAVE_MMCIF_TX, | ||
1193 | }, | ||
1194 | }; | ||
1195 | |||
1196 | static struct sh_mmcif_plat_data sh_mmcif_plat = { | 1146 | static struct sh_mmcif_plat_data sh_mmcif_plat = { |
1197 | .sup_pclk = 0, | 1147 | .sup_pclk = 0, |
1198 | .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, | 1148 | .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, |
@@ -1200,7 +1150,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = { | |||
1200 | MMC_CAP_8_BIT_DATA | | 1150 | MMC_CAP_8_BIT_DATA | |
1201 | MMC_CAP_NEEDS_POLL, | 1151 | MMC_CAP_NEEDS_POLL, |
1202 | .get_cd = slot_cn7_get_cd, | 1152 | .get_cd = slot_cn7_get_cd, |
1203 | .dma = &sh_mmcif_dma, | 1153 | .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, |
1154 | .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, | ||
1204 | }; | 1155 | }; |
1205 | 1156 | ||
1206 | static struct platform_device sh_mmcif_device = { | 1157 | static struct platform_device sh_mmcif_device = { |
@@ -1311,7 +1262,6 @@ static struct platform_device *mackerel_devices[] __initdata = { | |||
1311 | &nor_flash_device, | 1262 | &nor_flash_device, |
1312 | &smc911x_device, | 1263 | &smc911x_device, |
1313 | &lcdc_device, | 1264 | &lcdc_device, |
1314 | &usb1_host_device, | ||
1315 | &usbhs1_device, | 1265 | &usbhs1_device, |
1316 | &usbhs0_device, | 1266 | &usbhs0_device, |
1317 | &leds_device, | 1267 | &leds_device, |
@@ -1473,9 +1423,6 @@ static void __init mackerel_init(void) | |||
1473 | gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */ | 1423 | gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */ |
1474 | gpio_request(GPIO_FN_IDIN_1_113, NULL); | 1424 | gpio_request(GPIO_FN_IDIN_1_113, NULL); |
1475 | 1425 | ||
1476 | /* USB phy tweak to make the r8a66597_hcd host driver work */ | ||
1477 | __raw_writew(0x8a0a, 0xe6058130); /* USBCR4 */ | ||
1478 | |||
1479 | /* enable FSI2 port A (ak4643) */ | 1426 | /* enable FSI2 port A (ak4643) */ |
1480 | gpio_request(GPIO_FN_FSIAIBT, NULL); | 1427 | gpio_request(GPIO_FN_FSIAIBT, NULL); |
1481 | gpio_request(GPIO_FN_FSIAILR, NULL); | 1428 | gpio_request(GPIO_FN_FSIAILR, NULL); |
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index afbead6a6e17..7727cca6136c 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c | |||
@@ -365,6 +365,114 @@ static struct clk div6_clks[DIV6_NR] = { | |||
365 | dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3), | 365 | dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3), |
366 | }; | 366 | }; |
367 | 367 | ||
368 | /* DSI DIV */ | ||
369 | static unsigned long dsiphy_recalc(struct clk *clk) | ||
370 | { | ||
371 | u32 value; | ||
372 | |||
373 | value = __raw_readl(clk->mapping->base); | ||
374 | |||
375 | /* FIXME */ | ||
376 | if (!(value & 0x000B8000)) | ||
377 | return clk->parent->rate; | ||
378 | |||
379 | value &= 0x3f; | ||
380 | value += 1; | ||
381 | |||
382 | if ((value < 12) || | ||
383 | (value > 33)) { | ||
384 | pr_err("DSIPHY has wrong value (%d)", value); | ||
385 | return 0; | ||
386 | } | ||
387 | |||
388 | return clk->parent->rate / value; | ||
389 | } | ||
390 | |||
391 | static long dsiphy_round_rate(struct clk *clk, unsigned long rate) | ||
392 | { | ||
393 | return clk_rate_mult_range_round(clk, 12, 33, rate); | ||
394 | } | ||
395 | |||
396 | static void dsiphy_disable(struct clk *clk) | ||
397 | { | ||
398 | u32 value; | ||
399 | |||
400 | value = __raw_readl(clk->mapping->base); | ||
401 | value &= ~0x000B8000; | ||
402 | |||
403 | __raw_writel(value , clk->mapping->base); | ||
404 | } | ||
405 | |||
406 | static int dsiphy_enable(struct clk *clk) | ||
407 | { | ||
408 | u32 value; | ||
409 | int multi; | ||
410 | |||
411 | value = __raw_readl(clk->mapping->base); | ||
412 | multi = (value & 0x3f) + 1; | ||
413 | |||
414 | if ((multi < 12) || (multi > 33)) | ||
415 | return -EIO; | ||
416 | |||
417 | __raw_writel(value | 0x000B8000, clk->mapping->base); | ||
418 | |||
419 | return 0; | ||
420 | } | ||
421 | |||
422 | static int dsiphy_set_rate(struct clk *clk, unsigned long rate) | ||
423 | { | ||
424 | u32 value; | ||
425 | int idx; | ||
426 | |||
427 | idx = rate / clk->parent->rate; | ||
428 | if ((idx < 12) || (idx > 33)) | ||
429 | return -EINVAL; | ||
430 | |||
431 | idx += -1; | ||
432 | |||
433 | value = __raw_readl(clk->mapping->base); | ||
434 | value = (value & ~0x3f) + idx; | ||
435 | |||
436 | __raw_writel(value, clk->mapping->base); | ||
437 | |||
438 | return 0; | ||
439 | } | ||
440 | |||
441 | static struct clk_ops dsiphy_clk_ops = { | ||
442 | .recalc = dsiphy_recalc, | ||
443 | .round_rate = dsiphy_round_rate, | ||
444 | .set_rate = dsiphy_set_rate, | ||
445 | .enable = dsiphy_enable, | ||
446 | .disable = dsiphy_disable, | ||
447 | }; | ||
448 | |||
449 | static struct clk_mapping dsi0phy_clk_mapping = { | ||
450 | .phys = DSI0PHYCR, | ||
451 | .len = 4, | ||
452 | }; | ||
453 | |||
454 | static struct clk_mapping dsi1phy_clk_mapping = { | ||
455 | .phys = DSI1PHYCR, | ||
456 | .len = 4, | ||
457 | }; | ||
458 | |||
459 | static struct clk dsi0phy_clk = { | ||
460 | .ops = &dsiphy_clk_ops, | ||
461 | .parent = &div6_clks[DIV6_DSI0P], /* late install */ | ||
462 | .mapping = &dsi0phy_clk_mapping, | ||
463 | }; | ||
464 | |||
465 | static struct clk dsi1phy_clk = { | ||
466 | .ops = &dsiphy_clk_ops, | ||
467 | .parent = &div6_clks[DIV6_DSI1P], /* late install */ | ||
468 | .mapping = &dsi1phy_clk_mapping, | ||
469 | }; | ||
470 | |||
471 | static struct clk *late_main_clks[] = { | ||
472 | &dsi0phy_clk, | ||
473 | &dsi1phy_clk, | ||
474 | }; | ||
475 | |||
368 | enum { MSTP001, | 476 | enum { MSTP001, |
369 | MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100, | 477 | MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100, |
370 | MSTP219, | 478 | MSTP219, |
@@ -429,6 +537,8 @@ static struct clk_lookup lookups[] = { | |||
429 | CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]), | 537 | CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]), |
430 | CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]), | 538 | CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]), |
431 | CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]), | 539 | CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]), |
540 | CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk), | ||
541 | CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk), | ||
432 | 542 | ||
433 | /* MSTP32 clocks */ | 543 | /* MSTP32 clocks */ |
434 | CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */ | 544 | CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */ |
@@ -504,6 +614,9 @@ void __init sh73a0_clock_init(void) | |||
504 | if (!ret) | 614 | if (!ret) |
505 | ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); | 615 | ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); |
506 | 616 | ||
617 | for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++) | ||
618 | ret = clk_register(late_main_clks[k]); | ||
619 | |||
507 | clkdev_add_table(lookups, ARRAY_SIZE(lookups)); | 620 | clkdev_add_table(lookups, ARRAY_SIZE(lookups)); |
508 | 621 | ||
509 | if (!ret) | 622 | if (!ret) |
diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h index 881d515a9686..cad57578ceed 100644 --- a/arch/arm/mach-shmobile/include/mach/sh73a0.h +++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h | |||
@@ -515,8 +515,8 @@ enum { | |||
515 | SHDMA_SLAVE_MMCIF_RX, | 515 | SHDMA_SLAVE_MMCIF_RX, |
516 | }; | 516 | }; |
517 | 517 | ||
518 | /* PINT interrupts are located at Linux IRQ 768 and up */ | 518 | /* PINT interrupts are located at Linux IRQ 800 and up */ |
519 | #define SH73A0_PINT0_IRQ(irq) ((irq) + 768) | 519 | #define SH73A0_PINT0_IRQ(irq) ((irq) + 800) |
520 | #define SH73A0_PINT1_IRQ(irq) ((irq) + 800) | 520 | #define SH73A0_PINT1_IRQ(irq) ((irq) + 832) |
521 | 521 | ||
522 | #endif /* __ASM_SH73A0_H__ */ | 522 | #endif /* __ASM_SH73A0_H__ */ |
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index 1eda6b0b69e3..9857595eaa79 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c | |||
@@ -19,6 +19,7 @@ | |||
19 | #include <linux/kernel.h> | 19 | #include <linux/kernel.h> |
20 | #include <linux/init.h> | 20 | #include <linux/init.h> |
21 | #include <linux/interrupt.h> | 21 | #include <linux/interrupt.h> |
22 | #include <linux/module.h> | ||
22 | #include <linux/irq.h> | 23 | #include <linux/irq.h> |
23 | #include <linux/io.h> | 24 | #include <linux/io.h> |
24 | #include <linux/sh_intc.h> | 25 | #include <linux/sh_intc.h> |
@@ -445,6 +446,7 @@ void __init sh73a0_init_irq(void) | |||
445 | setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]); | 446 | setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]); |
446 | 447 | ||
447 | n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k))); | 448 | n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k))); |
449 | WARN_ON(irq_alloc_desc_at(n, numa_node_id()) != n); | ||
448 | irq_set_chip_and_handler_name(n, &intca_gic_irq_chip, | 450 | irq_set_chip_and_handler_name(n, &intca_gic_irq_chip, |
449 | handle_level_irq, "level"); | 451 | handle_level_irq, "level"); |
450 | set_irq_flags(n, IRQF_VALID); /* yuck */ | 452 | set_irq_flags(n, IRQF_VALID); /* yuck */ |
diff --git a/arch/arm/mach-shmobile/pfc-r8a7779.c b/arch/arm/mach-shmobile/pfc-r8a7779.c index 963532f2b2c4..d14c9b048077 100644 --- a/arch/arm/mach-shmobile/pfc-r8a7779.c +++ b/arch/arm/mach-shmobile/pfc-r8a7779.c | |||
@@ -2120,7 +2120,7 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = { | |||
2120 | FN_AUDATA3, 0, 0, 0 } | 2120 | FN_AUDATA3, 0, 0, 0 } |
2121 | }, | 2121 | }, |
2122 | { PINMUX_CFG_REG_VAR("IPSR4", 0xfffc0030, 32, | 2122 | { PINMUX_CFG_REG_VAR("IPSR4", 0xfffc0030, 32, |
2123 | 3, 1, 1, 1, 1, 1, 1, 3, 3, 1, | 2123 | 3, 1, 1, 1, 1, 1, 1, 3, 3, |
2124 | 1, 1, 1, 1, 1, 1, 3, 3, 3, 2) { | 2124 | 1, 1, 1, 1, 1, 1, 3, 3, 3, 2) { |
2125 | /* IP4_31_29 [3] */ | 2125 | /* IP4_31_29 [3] */ |
2126 | FN_DU1_DB0, FN_VI2_DATA4_VI2_B4, FN_SCL2_B, FN_SD3_DAT0, | 2126 | FN_DU1_DB0, FN_VI2_DATA4_VI2_B4, FN_SCL2_B, FN_SD3_DAT0, |
diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c index 1bd6585a6acf..336093f9210a 100644 --- a/arch/arm/mach-shmobile/pfc-sh7372.c +++ b/arch/arm/mach-shmobile/pfc-sh7372.c | |||
@@ -23,6 +23,7 @@ | |||
23 | #include <linux/init.h> | 23 | #include <linux/init.h> |
24 | #include <linux/kernel.h> | 24 | #include <linux/kernel.h> |
25 | #include <linux/gpio.h> | 25 | #include <linux/gpio.h> |
26 | #include <mach/irqs.h> | ||
26 | #include <mach/sh7372.h> | 27 | #include <mach/sh7372.h> |
27 | 28 | ||
28 | #define CPU_ALL_PORT(fn, pfx, sfx) \ | 29 | #define CPU_ALL_PORT(fn, pfx, sfx) \ |
@@ -1594,6 +1595,43 @@ static struct pinmux_data_reg pinmux_data_regs[] = { | |||
1594 | { }, | 1595 | { }, |
1595 | }; | 1596 | }; |
1596 | 1597 | ||
1598 | #define EXT_IRQ16L(n) evt2irq(0x200 + ((n) << 5)) | ||
1599 | #define EXT_IRQ16H(n) evt2irq(0x3200 + (((n) - 16) << 5)) | ||
1600 | static struct pinmux_irq pinmux_irqs[] = { | ||
1601 | PINMUX_IRQ(EXT_IRQ16L(0), PORT6_FN0, PORT162_FN0), | ||
1602 | PINMUX_IRQ(EXT_IRQ16L(1), PORT12_FN0), | ||
1603 | PINMUX_IRQ(EXT_IRQ16L(2), PORT4_FN0, PORT5_FN0), | ||
1604 | PINMUX_IRQ(EXT_IRQ16L(3), PORT8_FN0, PORT16_FN0), | ||
1605 | PINMUX_IRQ(EXT_IRQ16L(4), PORT17_FN0, PORT163_FN0), | ||
1606 | PINMUX_IRQ(EXT_IRQ16L(5), PORT18_FN0), | ||
1607 | PINMUX_IRQ(EXT_IRQ16L(6), PORT39_FN0, PORT164_FN0), | ||
1608 | PINMUX_IRQ(EXT_IRQ16L(7), PORT40_FN0, PORT167_FN0), | ||
1609 | PINMUX_IRQ(EXT_IRQ16L(8), PORT41_FN0, PORT168_FN0), | ||
1610 | PINMUX_IRQ(EXT_IRQ16L(9), PORT42_FN0, PORT169_FN0), | ||
1611 | PINMUX_IRQ(EXT_IRQ16L(10), PORT65_FN0), | ||
1612 | PINMUX_IRQ(EXT_IRQ16L(11), PORT67_FN0), | ||
1613 | PINMUX_IRQ(EXT_IRQ16L(12), PORT80_FN0, PORT137_FN0), | ||
1614 | PINMUX_IRQ(EXT_IRQ16L(13), PORT81_FN0, PORT145_FN0), | ||
1615 | PINMUX_IRQ(EXT_IRQ16L(14), PORT82_FN0, PORT146_FN0), | ||
1616 | PINMUX_IRQ(EXT_IRQ16L(15), PORT83_FN0, PORT147_FN0), | ||
1617 | PINMUX_IRQ(EXT_IRQ16H(16), PORT84_FN0, PORT170_FN0), | ||
1618 | PINMUX_IRQ(EXT_IRQ16H(17), PORT85_FN0), | ||
1619 | PINMUX_IRQ(EXT_IRQ16H(18), PORT86_FN0), | ||
1620 | PINMUX_IRQ(EXT_IRQ16H(19), PORT87_FN0), | ||
1621 | PINMUX_IRQ(EXT_IRQ16H(20), PORT92_FN0), | ||
1622 | PINMUX_IRQ(EXT_IRQ16H(21), PORT93_FN0), | ||
1623 | PINMUX_IRQ(EXT_IRQ16H(22), PORT94_FN0), | ||
1624 | PINMUX_IRQ(EXT_IRQ16H(23), PORT95_FN0), | ||
1625 | PINMUX_IRQ(EXT_IRQ16H(24), PORT112_FN0), | ||
1626 | PINMUX_IRQ(EXT_IRQ16H(25), PORT119_FN0), | ||
1627 | PINMUX_IRQ(EXT_IRQ16H(26), PORT121_FN0, PORT172_FN0), | ||
1628 | PINMUX_IRQ(EXT_IRQ16H(27), PORT122_FN0, PORT180_FN0), | ||
1629 | PINMUX_IRQ(EXT_IRQ16H(28), PORT123_FN0, PORT181_FN0), | ||
1630 | PINMUX_IRQ(EXT_IRQ16H(29), PORT129_FN0, PORT182_FN0), | ||
1631 | PINMUX_IRQ(EXT_IRQ16H(30), PORT130_FN0, PORT183_FN0), | ||
1632 | PINMUX_IRQ(EXT_IRQ16H(31), PORT138_FN0, PORT184_FN0), | ||
1633 | }; | ||
1634 | |||
1597 | static struct pinmux_info sh7372_pinmux_info = { | 1635 | static struct pinmux_info sh7372_pinmux_info = { |
1598 | .name = "sh7372_pfc", | 1636 | .name = "sh7372_pfc", |
1599 | .reserved_id = PINMUX_RESERVED, | 1637 | .reserved_id = PINMUX_RESERVED, |
@@ -1614,6 +1652,9 @@ static struct pinmux_info sh7372_pinmux_info = { | |||
1614 | 1652 | ||
1615 | .gpio_data = pinmux_data, | 1653 | .gpio_data = pinmux_data, |
1616 | .gpio_data_size = ARRAY_SIZE(pinmux_data), | 1654 | .gpio_data_size = ARRAY_SIZE(pinmux_data), |
1655 | |||
1656 | .gpio_irq = pinmux_irqs, | ||
1657 | .gpio_irq_size = ARRAY_SIZE(pinmux_irqs), | ||
1617 | }; | 1658 | }; |
1618 | 1659 | ||
1619 | void sh7372_pinmux_init(void) | 1660 | void sh7372_pinmux_init(void) |
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 6fcf304d3cdf..a83cf51fc099 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c | |||
@@ -662,6 +662,7 @@ static struct sh_dmae_pdata usb_dma0_platform_data = { | |||
662 | .dmaor_is_32bit = 1, | 662 | .dmaor_is_32bit = 1, |
663 | .needs_tend_set = 1, | 663 | .needs_tend_set = 1, |
664 | .no_dmars = 1, | 664 | .no_dmars = 1, |
665 | .slave_only = 1, | ||
665 | }; | 666 | }; |
666 | 667 | ||
667 | static struct resource sh7372_usb_dmae0_resources[] = { | 668 | static struct resource sh7372_usb_dmae0_resources[] = { |
@@ -723,6 +724,7 @@ static struct sh_dmae_pdata usb_dma1_platform_data = { | |||
723 | .dmaor_is_32bit = 1, | 724 | .dmaor_is_32bit = 1, |
724 | .needs_tend_set = 1, | 725 | .needs_tend_set = 1, |
725 | .no_dmars = 1, | 726 | .no_dmars = 1, |
727 | .slave_only = 1, | ||
726 | }; | 728 | }; |
727 | 729 | ||
728 | static struct resource sh7372_usb_dmae1_resources[] = { | 730 | static struct resource sh7372_usb_dmae1_resources[] = { |
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index 0d159d64a345..2d0d4212be41 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c | |||
@@ -80,7 +80,7 @@ int __cpuinit sh73a0_boot_secondary(unsigned int cpu) | |||
80 | /* enable cache coherency */ | 80 | /* enable cache coherency */ |
81 | modify_scu_cpu_psr(0, 3 << (cpu * 8)); | 81 | modify_scu_cpu_psr(0, 3 << (cpu * 8)); |
82 | 82 | ||
83 | if (((__raw_readw(__io(PSTR)) >> (4 * cpu)) & 3) == 3) | 83 | if (((__raw_readl(__io(PSTR)) >> (4 * cpu)) & 3) == 3) |
84 | __raw_writel(1 << cpu, __io(WUPCR)); /* wake up */ | 84 | __raw_writel(1 << cpu, __io(WUPCR)); /* wake up */ |
85 | else | 85 | else |
86 | __raw_writel(1 << cpu, __io(SRESCR)); /* reset */ | 86 | __raw_writel(1 << cpu, __io(SRESCR)); /* reset */ |
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c index fcf4f377b1dc..330afdfa2475 100644 --- a/arch/arm/mach-tegra/board-paz00.c +++ b/arch/arm/mach-tegra/board-paz00.c | |||
@@ -60,9 +60,9 @@ static struct plat_serial8250_port debug_uart_platform_data[] = { | |||
60 | .uartclk = 216000000, | 60 | .uartclk = 216000000, |
61 | }, { | 61 | }, { |
62 | /* serial port on mini-pcie */ | 62 | /* serial port on mini-pcie */ |
63 | .membase = IO_ADDRESS(TEGRA_UARTD_BASE), | 63 | .membase = IO_ADDRESS(TEGRA_UARTC_BASE), |
64 | .mapbase = TEGRA_UARTD_BASE, | 64 | .mapbase = TEGRA_UARTC_BASE, |
65 | .irq = INT_UARTD, | 65 | .irq = INT_UARTC, |
66 | .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE, | 66 | .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE, |
67 | .type = PORT_TEGRA, | 67 | .type = PORT_TEGRA, |
68 | .iotype = UPIO_MEM, | 68 | .iotype = UPIO_MEM, |
@@ -174,7 +174,7 @@ static void __init tegra_paz00_fixup(struct tag *tags, char **cmdline, | |||
174 | static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = { | 174 | static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = { |
175 | /* name parent rate enabled */ | 175 | /* name parent rate enabled */ |
176 | { "uarta", "pll_p", 216000000, true }, | 176 | { "uarta", "pll_p", 216000000, true }, |
177 | { "uartd", "pll_p", 216000000, true }, | 177 | { "uartc", "pll_p", 216000000, true }, |
178 | 178 | ||
179 | { "pll_p_out4", "pll_p", 24000000, true }, | 179 | { "pll_p_out4", "pll_p", 24000000, true }, |
180 | { "usbd", "clk_m", 12000000, false }, | 180 | { "usbd", "clk_m", 12000000, false }, |
diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h index ffa83f580db6..3c9f8da37ea3 100644 --- a/arch/arm/mach-tegra/board-paz00.h +++ b/arch/arm/mach-tegra/board-paz00.h | |||
@@ -22,7 +22,7 @@ | |||
22 | /* SDCARD */ | 22 | /* SDCARD */ |
23 | #define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5 | 23 | #define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5 |
24 | #define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1 | 24 | #define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1 |
25 | #define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PT3 | 25 | #define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PV1 |
26 | 26 | ||
27 | /* ULPI */ | 27 | /* ULPI */ |
28 | #define TEGRA_ULPI_RST TEGRA_GPIO_PV0 | 28 | #define TEGRA_ULPI_RST TEGRA_GPIO_PV0 |
diff --git a/arch/arm/mach-tegra/include/mach/dma.h b/arch/arm/mach-tegra/include/mach/dma.h index d0132e8031a1..3c9339058bec 100644 --- a/arch/arm/mach-tegra/include/mach/dma.h +++ b/arch/arm/mach-tegra/include/mach/dma.h | |||
@@ -23,11 +23,6 @@ | |||
23 | 23 | ||
24 | #include <linux/list.h> | 24 | #include <linux/list.h> |
25 | 25 | ||
26 | #if defined(CONFIG_TEGRA_SYSTEM_DMA) | ||
27 | |||
28 | struct tegra_dma_req; | ||
29 | struct tegra_dma_channel; | ||
30 | |||
31 | #define TEGRA_DMA_REQ_SEL_CNTR 0 | 26 | #define TEGRA_DMA_REQ_SEL_CNTR 0 |
32 | #define TEGRA_DMA_REQ_SEL_I2S_2 1 | 27 | #define TEGRA_DMA_REQ_SEL_I2S_2 1 |
33 | #define TEGRA_DMA_REQ_SEL_I2S_1 2 | 28 | #define TEGRA_DMA_REQ_SEL_I2S_1 2 |
@@ -56,6 +51,11 @@ struct tegra_dma_channel; | |||
56 | #define TEGRA_DMA_REQ_SEL_OWR 25 | 51 | #define TEGRA_DMA_REQ_SEL_OWR 25 |
57 | #define TEGRA_DMA_REQ_SEL_INVALID 31 | 52 | #define TEGRA_DMA_REQ_SEL_INVALID 31 |
58 | 53 | ||
54 | #if defined(CONFIG_TEGRA_SYSTEM_DMA) | ||
55 | |||
56 | struct tegra_dma_req; | ||
57 | struct tegra_dma_channel; | ||
58 | |||
59 | enum tegra_dma_mode { | 59 | enum tegra_dma_mode { |
60 | TEGRA_DMA_SHARED = 1, | 60 | TEGRA_DMA_SHARED = 1, |
61 | TEGRA_DMA_MODE_CONTINOUS = 2, | 61 | TEGRA_DMA_MODE_CONTINOUS = 2, |
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 1a3ca2488164..7edef9121632 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig | |||
@@ -631,7 +631,8 @@ comment "Processor Features" | |||
631 | 631 | ||
632 | config ARM_LPAE | 632 | config ARM_LPAE |
633 | bool "Support for the Large Physical Address Extension" | 633 | bool "Support for the Large Physical Address Extension" |
634 | depends on MMU && CPU_V7 | 634 | depends on MMU && CPU_32v7 && !CPU_32v6 && !CPU_32v5 && \ |
635 | !CPU_32v4 && !CPU_32v3 | ||
635 | help | 636 | help |
636 | Say Y if you have an ARMv7 processor supporting the LPAE page | 637 | Say Y if you have an ARMv7 processor supporting the LPAE page |
637 | table format and you would like to access memory beyond the | 638 | table format and you would like to access memory beyond the |
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 07c4bc8ea0a4..a655d3da386d 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S | |||
@@ -54,9 +54,15 @@ loop1: | |||
54 | and r1, r1, #7 @ mask of the bits for current cache only | 54 | and r1, r1, #7 @ mask of the bits for current cache only |
55 | cmp r1, #2 @ see what cache we have at this level | 55 | cmp r1, #2 @ see what cache we have at this level |
56 | blt skip @ skip if no cache, or just i-cache | 56 | blt skip @ skip if no cache, or just i-cache |
57 | #ifdef CONFIG_PREEMPT | ||
58 | save_and_disable_irqs_notrace r9 @ make cssr&csidr read atomic | ||
59 | #endif | ||
57 | mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr | 60 | mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr |
58 | isb @ isb to sych the new cssr&csidr | 61 | isb @ isb to sych the new cssr&csidr |
59 | mrc p15, 1, r1, c0, c0, 0 @ read the new csidr | 62 | mrc p15, 1, r1, c0, c0, 0 @ read the new csidr |
63 | #ifdef CONFIG_PREEMPT | ||
64 | restore_irqs_notrace r9 | ||
65 | #endif | ||
60 | and r2, r1, #7 @ extract the length of the cache lines | 66 | and r2, r1, #7 @ extract the length of the cache lines |
61 | add r2, r2, #4 @ add 4 (line length offset) | 67 | add r2, r2, #4 @ add 4 (line length offset) |
62 | ldr r4, =0x3ff | 68 | ldr r4, =0x3ff |
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index ba159370fa5f..80632e8d7538 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c | |||
@@ -225,8 +225,7 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn, | |||
225 | if ((area->flags & VM_ARM_MTYPE_MASK) != VM_ARM_MTYPE(mtype)) | 225 | if ((area->flags & VM_ARM_MTYPE_MASK) != VM_ARM_MTYPE(mtype)) |
226 | continue; | 226 | continue; |
227 | if (__phys_to_pfn(area->phys_addr) > pfn || | 227 | if (__phys_to_pfn(area->phys_addr) > pfn || |
228 | __pfn_to_phys(pfn) + offset + size-1 > | 228 | __pfn_to_phys(pfn) + size-1 > area->phys_addr + area->size-1) |
229 | area->phys_addr + area->size-1) | ||
230 | continue; | 229 | continue; |
231 | /* we can drop the lock here as we know *area is static */ | 230 | /* we can drop the lock here as we know *area is static */ |
232 | read_unlock(&vmlist_lock); | 231 | read_unlock(&vmlist_lock); |
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 06383b51e655..4de7d1e79e73 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c | |||
@@ -69,6 +69,7 @@ void __init omap_reserve(void) | |||
69 | omap_vram_reserve_sdram_memblock(); | 69 | omap_vram_reserve_sdram_memblock(); |
70 | omap_dsp_reserve_sdram_memblock(); | 70 | omap_dsp_reserve_sdram_memblock(); |
71 | omap_secure_ram_reserve_memblock(); | 71 | omap_secure_ram_reserve_memblock(); |
72 | omap_barrier_reserve_memblock(); | ||
72 | } | 73 | } |
73 | 74 | ||
74 | void __init omap_init_consistent_dma_size(void) | 75 | void __init omap_init_consistent_dma_size(void) |
diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h index 64f9d1c7f1bb..8c7994ce9869 100644 --- a/arch/arm/plat-omap/include/plat/omap-secure.h +++ b/arch/arm/plat-omap/include/plat/omap-secure.h | |||
@@ -3,11 +3,17 @@ | |||
3 | 3 | ||
4 | #include <linux/types.h> | 4 | #include <linux/types.h> |
5 | 5 | ||
6 | #ifdef CONFIG_ARCH_OMAP2PLUS | 6 | #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) |
7 | extern int omap_secure_ram_reserve_memblock(void); | 7 | extern int omap_secure_ram_reserve_memblock(void); |
8 | #else | 8 | #else |
9 | static inline void omap_secure_ram_reserve_memblock(void) | 9 | static inline void omap_secure_ram_reserve_memblock(void) |
10 | { } | 10 | { } |
11 | #endif | 11 | #endif |
12 | 12 | ||
13 | #ifdef CONFIG_OMAP4_ERRATA_I688 | ||
14 | extern int omap_barrier_reserve_memblock(void); | ||
15 | #else | ||
16 | static inline void omap_barrier_reserve_memblock(void) | ||
17 | { } | ||
18 | #endif | ||
13 | #endif /* __OMAP_SECURE_H__ */ | 19 | #endif /* __OMAP_SECURE_H__ */ |
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index e5a2fde29b19..089899a7db72 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c | |||
@@ -789,10 +789,7 @@ void __init orion_xor1_init(unsigned long mapbase_low, | |||
789 | /***************************************************************************** | 789 | /***************************************************************************** |
790 | * EHCI | 790 | * EHCI |
791 | ****************************************************************************/ | 791 | ****************************************************************************/ |
792 | static struct orion_ehci_data orion_ehci_data = { | 792 | static struct orion_ehci_data orion_ehci_data; |
793 | .phy_version = EHCI_PHY_NA, | ||
794 | }; | ||
795 | |||
796 | static u64 ehci_dmamask = DMA_BIT_MASK(32); | 793 | static u64 ehci_dmamask = DMA_BIT_MASK(32); |
797 | 794 | ||
798 | 795 | ||
@@ -812,8 +809,10 @@ static struct platform_device orion_ehci = { | |||
812 | }; | 809 | }; |
813 | 810 | ||
814 | void __init orion_ehci_init(unsigned long mapbase, | 811 | void __init orion_ehci_init(unsigned long mapbase, |
815 | unsigned long irq) | 812 | unsigned long irq, |
813 | enum orion_ehci_phy_ver phy_version) | ||
816 | { | 814 | { |
815 | orion_ehci_data.phy_version = phy_version; | ||
817 | fill_resources(&orion_ehci, orion_ehci_resources, mapbase, SZ_4K - 1, | 816 | fill_resources(&orion_ehci, orion_ehci_resources, mapbase, SZ_4K - 1, |
818 | irq); | 817 | irq); |
819 | 818 | ||
diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h index 0fe08d77e835..a7fa005a5a0e 100644 --- a/arch/arm/plat-orion/include/plat/common.h +++ b/arch/arm/plat-orion/include/plat/common.h | |||
@@ -89,7 +89,8 @@ void __init orion_xor1_init(unsigned long mapbase_low, | |||
89 | unsigned long irq_1); | 89 | unsigned long irq_1); |
90 | 90 | ||
91 | void __init orion_ehci_init(unsigned long mapbase, | 91 | void __init orion_ehci_init(unsigned long mapbase, |
92 | unsigned long irq); | 92 | unsigned long irq, |
93 | enum orion_ehci_phy_ver phy_version); | ||
93 | 94 | ||
94 | void __init orion_ehci_1_init(unsigned long mapbase, | 95 | void __init orion_ehci_1_init(unsigned long mapbase, |
95 | unsigned long irq); | 96 | unsigned long irq); |
diff --git a/arch/arm/plat-orion/mpp.c b/arch/arm/plat-orion/mpp.c index 91553432711d..3b1e17bd3d17 100644 --- a/arch/arm/plat-orion/mpp.c +++ b/arch/arm/plat-orion/mpp.c | |||
@@ -64,8 +64,7 @@ void __init orion_mpp_conf(unsigned int *mpp_list, unsigned int variant_mask, | |||
64 | gpio_mode |= GPIO_INPUT_OK; | 64 | gpio_mode |= GPIO_INPUT_OK; |
65 | if (*mpp_list & MPP_OUTPUT_MASK) | 65 | if (*mpp_list & MPP_OUTPUT_MASK) |
66 | gpio_mode |= GPIO_OUTPUT_OK; | 66 | gpio_mode |= GPIO_OUTPUT_OK; |
67 | if (sel != 0) | 67 | |
68 | gpio_mode = 0; | ||
69 | orion_gpio_set_valid(num, gpio_mode); | 68 | orion_gpio_set_valid(num, gpio_mode); |
70 | } | 69 | } |
71 | 70 | ||
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 32a6e394db24..f10768e988d4 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c | |||
@@ -468,8 +468,10 @@ void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd) | |||
468 | { | 468 | { |
469 | struct s3c2410_platform_i2c *npd; | 469 | struct s3c2410_platform_i2c *npd; |
470 | 470 | ||
471 | if (!pd) | 471 | if (!pd) { |
472 | pd = &default_i2c_data; | 472 | pd = &default_i2c_data; |
473 | pd->bus_num = 0; | ||
474 | } | ||
473 | 475 | ||
474 | npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), | 476 | npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), |
475 | &s3c_device_i2c0); | 477 | &s3c_device_i2c0); |
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index 197e96f70405..3dea7231f637 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig | |||
@@ -8,6 +8,7 @@ config AVR32 | |||
8 | select HAVE_KPROBES | 8 | select HAVE_KPROBES |
9 | select HAVE_GENERIC_HARDIRQS | 9 | select HAVE_GENERIC_HARDIRQS |
10 | select GENERIC_IRQ_PROBE | 10 | select GENERIC_IRQ_PROBE |
11 | select GENERIC_ATOMIC64 | ||
11 | select HARDIRQS_SW_RESEND | 12 | select HARDIRQS_SW_RESEND |
12 | select GENERIC_IRQ_SHOW | 13 | select GENERIC_IRQ_SHOW |
13 | select ARCH_HAVE_NMI_SAFE_CMPXCHG | 14 | select ARCH_HAVE_NMI_SAFE_CMPXCHG |
diff --git a/arch/c6x/boot/Makefile b/arch/c6x/boot/Makefile index ecca820e6041..6891257d514c 100644 --- a/arch/c6x/boot/Makefile +++ b/arch/c6x/boot/Makefile | |||
@@ -13,7 +13,7 @@ obj-y += linked_dtb.o | |||
13 | endif | 13 | endif |
14 | 14 | ||
15 | $(obj)/%.dtb: $(src)/dts/%.dts FORCE | 15 | $(obj)/%.dtb: $(src)/dts/%.dts FORCE |
16 | $(call cmd,dtc) | 16 | $(call if_changed_dep,dtc) |
17 | 17 | ||
18 | quiet_cmd_cp = CP $< $@$2 | 18 | quiet_cmd_cp = CP $< $@$2 |
19 | cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false) | 19 | cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false) |
diff --git a/arch/m68k/include/asm/mcf_pgtable.h b/arch/m68k/include/asm/mcf_pgtable.h index 756bde4fb4f8..3c793682e5d9 100644 --- a/arch/m68k/include/asm/mcf_pgtable.h +++ b/arch/m68k/include/asm/mcf_pgtable.h | |||
@@ -78,7 +78,8 @@ | |||
78 | | CF_PAGE_READABLE \ | 78 | | CF_PAGE_READABLE \ |
79 | | CF_PAGE_WRITABLE \ | 79 | | CF_PAGE_WRITABLE \ |
80 | | CF_PAGE_EXEC \ | 80 | | CF_PAGE_EXEC \ |
81 | | CF_PAGE_SYSTEM) | 81 | | CF_PAGE_SYSTEM \ |
82 | | CF_PAGE_SHARED) | ||
82 | 83 | ||
83 | #define PAGE_COPY __pgprot(CF_PAGE_VALID \ | 84 | #define PAGE_COPY __pgprot(CF_PAGE_VALID \ |
84 | | CF_PAGE_ACCESSED \ | 85 | | CF_PAGE_ACCESSED \ |
diff --git a/arch/m68k/mm/mcfmmu.c b/arch/m68k/mm/mcfmmu.c index babd5a97cdcb..875b800ef0dd 100644 --- a/arch/m68k/mm/mcfmmu.c +++ b/arch/m68k/mm/mcfmmu.c | |||
@@ -87,7 +87,7 @@ void __init paging_init(void) | |||
87 | 87 | ||
88 | int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word) | 88 | int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word) |
89 | { | 89 | { |
90 | unsigned long flags, mmuar; | 90 | unsigned long flags, mmuar, mmutr; |
91 | struct mm_struct *mm; | 91 | struct mm_struct *mm; |
92 | pgd_t *pgd; | 92 | pgd_t *pgd; |
93 | pmd_t *pmd; | 93 | pmd_t *pmd; |
@@ -137,9 +137,10 @@ int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word) | |||
137 | if (!pte_dirty(*pte) && !KMAPAREA(mmuar)) | 137 | if (!pte_dirty(*pte) && !KMAPAREA(mmuar)) |
138 | set_pte(pte, pte_wrprotect(*pte)); | 138 | set_pte(pte, pte_wrprotect(*pte)); |
139 | 139 | ||
140 | mmu_write(MMUTR, (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) | | 140 | mmutr = (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) | MMUTR_V; |
141 | (((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK) | 141 | if ((mmuar < TASK_UNMAPPED_BASE) || (mmuar >= TASK_SIZE)) |
142 | >> CF_PAGE_MMUTR_SHIFT) | MMUTR_V); | 142 | mmutr |= (pte->pte & CF_PAGE_MMUTR_MASK) >> CF_PAGE_MMUTR_SHIFT; |
143 | mmu_write(MMUTR, mmutr); | ||
143 | 144 | ||
144 | mmu_write(MMUDR, (pte_val(*pte) & PAGE_MASK) | | 145 | mmu_write(MMUDR, (pte_val(*pte) & PAGE_MASK) | |
145 | ((pte->pte) & CF_PAGE_MMUDR_MASK) | MMUDR_SZ_8KB | MMUDR_X); | 146 | ((pte->pte) & CF_PAGE_MMUDR_MASK) | MMUDR_SZ_8KB | MMUDR_X); |
diff --git a/arch/m68k/platform/coldfire/entry.S b/arch/m68k/platform/coldfire/entry.S index 863889fc31c9..281e38c2b6c7 100644 --- a/arch/m68k/platform/coldfire/entry.S +++ b/arch/m68k/platform/coldfire/entry.S | |||
@@ -136,7 +136,7 @@ Luser_return: | |||
136 | movel %sp,%d1 /* get thread_info pointer */ | 136 | movel %sp,%d1 /* get thread_info pointer */ |
137 | andl #-THREAD_SIZE,%d1 /* at base of kernel stack */ | 137 | andl #-THREAD_SIZE,%d1 /* at base of kernel stack */ |
138 | movel %d1,%a0 | 138 | movel %d1,%a0 |
139 | movel %a0@(TINFO_FLAGS),%d1 /* get thread_info->flags */ | 139 | moveb %a0@(TINFO_FLAGS+3),%d1 /* thread_info->flags (low 8 bits) */ |
140 | jne Lwork_to_do /* still work to do */ | 140 | jne Lwork_to_do /* still work to do */ |
141 | 141 | ||
142 | Lreturn: | 142 | Lreturn: |
@@ -148,8 +148,6 @@ Lwork_to_do: | |||
148 | btst #TIF_NEED_RESCHED,%d1 | 148 | btst #TIF_NEED_RESCHED,%d1 |
149 | jne reschedule | 149 | jne reschedule |
150 | 150 | ||
151 | /* GERG: do we need something here for TRACEing?? */ | ||
152 | |||
153 | Lsignal_return: | 151 | Lsignal_return: |
154 | subql #4,%sp /* dummy return address */ | 152 | subql #4,%sp /* dummy return address */ |
155 | SAVE_SWITCH_STACK | 153 | SAVE_SWITCH_STACK |
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index d4fc1a971779..604cd9dd1333 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c | |||
@@ -26,7 +26,6 @@ | |||
26 | #include <linux/cache.h> | 26 | #include <linux/cache.h> |
27 | #include <linux/of_platform.h> | 27 | #include <linux/of_platform.h> |
28 | #include <linux/dma-mapping.h> | 28 | #include <linux/dma-mapping.h> |
29 | #include <linux/cpu.h> | ||
30 | #include <asm/cacheflush.h> | 29 | #include <asm/cacheflush.h> |
31 | #include <asm/entry.h> | 30 | #include <asm/entry.h> |
32 | #include <asm/cpuinfo.h> | 31 | #include <asm/cpuinfo.h> |
@@ -227,23 +226,5 @@ static int __init setup_bus_notifier(void) | |||
227 | 226 | ||
228 | return 0; | 227 | return 0; |
229 | } | 228 | } |
230 | arch_initcall(setup_bus_notifier); | ||
231 | |||
232 | static DEFINE_PER_CPU(struct cpu, cpu_devices); | ||
233 | |||
234 | static int __init topology_init(void) | ||
235 | { | ||
236 | int i, ret; | ||
237 | |||
238 | for_each_present_cpu(i) { | ||
239 | struct cpu *c = &per_cpu(cpu_devices, i); | ||
240 | 229 | ||
241 | ret = register_cpu(c, i); | 230 | arch_initcall(setup_bus_notifier); |
242 | if (ret) | ||
243 | printk(KERN_WARNING "topology_init: register_cpu %d " | ||
244 | "failed (%d)\n", i, ret); | ||
245 | } | ||
246 | |||
247 | return 0; | ||
248 | } | ||
249 | subsys_initcall(topology_init); | ||
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index c4c1312473fb..5ab6e89603c5 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig | |||
@@ -2356,6 +2356,7 @@ config PCI | |||
2356 | depends on HW_HAS_PCI | 2356 | depends on HW_HAS_PCI |
2357 | select PCI_DOMAINS | 2357 | select PCI_DOMAINS |
2358 | select GENERIC_PCI_IOMAP | 2358 | select GENERIC_PCI_IOMAP |
2359 | select NO_GENERIC_PCI_IOPORT_MAP | ||
2359 | help | 2360 | help |
2360 | Find out whether you have a PCI motherboard. PCI is the name of a | 2361 | Find out whether you have a PCI motherboard. PCI is the name of a |
2361 | bus system, i.e. the way the CPU talks to the other stuff inside | 2362 | bus system, i.e. the way the CPU talks to the other stuff inside |
diff --git a/arch/mips/lib/iomap-pci.c b/arch/mips/lib/iomap-pci.c index 2635b1a96333..fd35daa45314 100644 --- a/arch/mips/lib/iomap-pci.c +++ b/arch/mips/lib/iomap-pci.c | |||
@@ -10,8 +10,8 @@ | |||
10 | #include <linux/module.h> | 10 | #include <linux/module.h> |
11 | #include <asm/io.h> | 11 | #include <asm/io.h> |
12 | 12 | ||
13 | static void __iomem *ioport_map_pci(struct pci_dev *dev, | 13 | void __iomem *__pci_ioport_map(struct pci_dev *dev, |
14 | unsigned long port, unsigned int nr) | 14 | unsigned long port, unsigned int nr) |
15 | { | 15 | { |
16 | struct pci_controller *ctrl = dev->bus->sysdata; | 16 | struct pci_controller *ctrl = dev->bus->sysdata; |
17 | unsigned long base = ctrl->io_map_base; | 17 | unsigned long base = ctrl->io_map_base; |
diff --git a/arch/openrisc/include/asm/ptrace.h b/arch/openrisc/include/asm/ptrace.h index 054537c5f9c9..e612ce4512c7 100644 --- a/arch/openrisc/include/asm/ptrace.h +++ b/arch/openrisc/include/asm/ptrace.h | |||
@@ -77,7 +77,6 @@ struct pt_regs { | |||
77 | long syscallno; /* Syscall number (used by strace) */ | 77 | long syscallno; /* Syscall number (used by strace) */ |
78 | long dummy; /* Cheap alignment fix */ | 78 | long dummy; /* Cheap alignment fix */ |
79 | }; | 79 | }; |
80 | #endif /* __ASSEMBLY__ */ | ||
81 | 80 | ||
82 | /* TODO: Rename this to REDZONE because that's what it is */ | 81 | /* TODO: Rename this to REDZONE because that's what it is */ |
83 | #define STACK_FRAME_OVERHEAD 128 /* size of minimum stack frame */ | 82 | #define STACK_FRAME_OVERHEAD 128 /* size of minimum stack frame */ |
@@ -87,6 +86,13 @@ struct pt_regs { | |||
87 | #define user_stack_pointer(regs) ((unsigned long)(regs)->sp) | 86 | #define user_stack_pointer(regs) ((unsigned long)(regs)->sp) |
88 | #define profile_pc(regs) instruction_pointer(regs) | 87 | #define profile_pc(regs) instruction_pointer(regs) |
89 | 88 | ||
89 | static inline long regs_return_value(struct pt_regs *regs) | ||
90 | { | ||
91 | return regs->gpr[11]; | ||
92 | } | ||
93 | |||
94 | #endif /* __ASSEMBLY__ */ | ||
95 | |||
90 | /* | 96 | /* |
91 | * Offsets used by 'ptrace' system call interface. | 97 | * Offsets used by 'ptrace' system call interface. |
92 | */ | 98 | */ |
diff --git a/arch/openrisc/kernel/init_task.c b/arch/openrisc/kernel/init_task.c index 45744a384927..ca534082d5f3 100644 --- a/arch/openrisc/kernel/init_task.c +++ b/arch/openrisc/kernel/init_task.c | |||
@@ -17,6 +17,7 @@ | |||
17 | 17 | ||
18 | #include <linux/init_task.h> | 18 | #include <linux/init_task.h> |
19 | #include <linux/mqueue.h> | 19 | #include <linux/mqueue.h> |
20 | #include <linux/export.h> | ||
20 | 21 | ||
21 | static struct signal_struct init_signals = INIT_SIGNALS(init_signals); | 22 | static struct signal_struct init_signals = INIT_SIGNALS(init_signals); |
22 | static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); | 23 | static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); |
diff --git a/arch/openrisc/kernel/irq.c b/arch/openrisc/kernel/irq.c index 59b302338331..4bfead220956 100644 --- a/arch/openrisc/kernel/irq.c +++ b/arch/openrisc/kernel/irq.c | |||
@@ -23,6 +23,7 @@ | |||
23 | #include <linux/irq.h> | 23 | #include <linux/irq.h> |
24 | #include <linux/seq_file.h> | 24 | #include <linux/seq_file.h> |
25 | #include <linux/kernel_stat.h> | 25 | #include <linux/kernel_stat.h> |
26 | #include <linux/export.h> | ||
26 | 27 | ||
27 | #include <linux/irqflags.h> | 28 | #include <linux/irqflags.h> |
28 | 29 | ||
diff --git a/arch/openrisc/kernel/ptrace.c b/arch/openrisc/kernel/ptrace.c index 656b94beab89..7259047d5f9d 100644 --- a/arch/openrisc/kernel/ptrace.c +++ b/arch/openrisc/kernel/ptrace.c | |||
@@ -188,11 +188,9 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) | |||
188 | */ | 188 | */ |
189 | ret = -1L; | 189 | ret = -1L; |
190 | 190 | ||
191 | /* Are these regs right??? */ | 191 | audit_syscall_entry(audit_arch(), regs->syscallno, |
192 | if (unlikely(current->audit_context)) | 192 | regs->gpr[3], regs->gpr[4], |
193 | audit_syscall_entry(audit_arch(), regs->syscallno, | 193 | regs->gpr[5], regs->gpr[6]); |
194 | regs->gpr[3], regs->gpr[4], | ||
195 | regs->gpr[5], regs->gpr[6]); | ||
196 | 194 | ||
197 | return ret ? : regs->syscallno; | 195 | return ret ? : regs->syscallno; |
198 | } | 196 | } |
@@ -201,9 +199,7 @@ asmlinkage void do_syscall_trace_leave(struct pt_regs *regs) | |||
201 | { | 199 | { |
202 | int step; | 200 | int step; |
203 | 201 | ||
204 | if (unlikely(current->audit_context)) | 202 | audit_syscall_exit(regs); |
205 | audit_syscall_exit(AUDITSC_RESULT(regs->gpr[11]), | ||
206 | regs->gpr[11]); | ||
207 | 203 | ||
208 | step = test_thread_flag(TIF_SINGLESTEP); | 204 | step = test_thread_flag(TIF_SINGLESTEP); |
209 | if (step || test_thread_flag(TIF_SYSCALL_TRACE)) | 205 | if (step || test_thread_flag(TIF_SYSCALL_TRACE)) |
diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile index 55cca1dac431..19ab7b2ea1cd 100644 --- a/arch/parisc/Makefile +++ b/arch/parisc/Makefile | |||
@@ -31,7 +31,11 @@ ifdef CONFIG_64BIT | |||
31 | UTS_MACHINE := parisc64 | 31 | UTS_MACHINE := parisc64 |
32 | CHECKFLAGS += -D__LP64__=1 -m64 | 32 | CHECKFLAGS += -D__LP64__=1 -m64 |
33 | WIDTH := 64 | 33 | WIDTH := 64 |
34 | |||
35 | # FIXME: if no default set, should really try to locate dynamically | ||
36 | ifeq ($(CROSS_COMPILE),) | ||
34 | CROSS_COMPILE := hppa64-linux-gnu- | 37 | CROSS_COMPILE := hppa64-linux-gnu- |
38 | endif | ||
35 | else # 32-bit | 39 | else # 32-bit |
36 | WIDTH := | 40 | WIDTH := |
37 | endif | 41 | endif |
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 2156e077859b..1acf65026773 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig | |||
@@ -24,10 +24,6 @@ CONFIG_PPC_SPLPAR=y | |||
24 | CONFIG_SCANLOG=m | 24 | CONFIG_SCANLOG=m |
25 | CONFIG_PPC_SMLPAR=y | 25 | CONFIG_PPC_SMLPAR=y |
26 | CONFIG_DTL=y | 26 | CONFIG_DTL=y |
27 | CONFIG_PPC_ISERIES=y | ||
28 | CONFIG_VIODASD=y | ||
29 | CONFIG_VIOCD=m | ||
30 | CONFIG_VIOTAPE=m | ||
31 | CONFIG_PPC_MAPLE=y | 27 | CONFIG_PPC_MAPLE=y |
32 | CONFIG_PPC_PASEMI=y | 28 | CONFIG_PPC_PASEMI=y |
33 | CONFIG_PPC_PASEMI_IOMMU=y | 29 | CONFIG_PPC_PASEMI_IOMMU=y |
@@ -259,7 +255,6 @@ CONFIG_PASEMI_MAC=y | |||
259 | CONFIG_MLX4_EN=m | 255 | CONFIG_MLX4_EN=m |
260 | CONFIG_QLGE=m | 256 | CONFIG_QLGE=m |
261 | CONFIG_BE2NET=m | 257 | CONFIG_BE2NET=m |
262 | CONFIG_ISERIES_VETH=m | ||
263 | CONFIG_PPP=m | 258 | CONFIG_PPP=m |
264 | CONFIG_PPP_ASYNC=m | 259 | CONFIG_PPP_ASYNC=m |
265 | CONFIG_PPP_SYNC_TTY=m | 260 | CONFIG_PPP_SYNC_TTY=m |
diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h index 43268f15004e..6d422979ebaf 100644 --- a/arch/powerpc/include/asm/ppc-pci.h +++ b/arch/powerpc/include/asm/ppc-pci.h | |||
@@ -142,6 +142,11 @@ static inline const char *eeh_pci_name(struct pci_dev *pdev) | |||
142 | return pdev ? pci_name(pdev) : "<null>"; | 142 | return pdev ? pci_name(pdev) : "<null>"; |
143 | } | 143 | } |
144 | 144 | ||
145 | static inline const char *eeh_driver_name(struct pci_dev *pdev) | ||
146 | { | ||
147 | return (pdev && pdev->driver) ? pdev->driver->name : "<null>"; | ||
148 | } | ||
149 | |||
145 | #endif /* CONFIG_EEH */ | 150 | #endif /* CONFIG_EEH */ |
146 | 151 | ||
147 | #else /* CONFIG_PCI */ | 152 | #else /* CONFIG_PCI */ |
diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h index 78a205162fd7..84cc7840cd18 100644 --- a/arch/powerpc/include/asm/ptrace.h +++ b/arch/powerpc/include/asm/ptrace.h | |||
@@ -83,8 +83,18 @@ struct pt_regs { | |||
83 | 83 | ||
84 | #ifndef __ASSEMBLY__ | 84 | #ifndef __ASSEMBLY__ |
85 | 85 | ||
86 | #define instruction_pointer(regs) ((regs)->nip) | 86 | #define GET_IP(regs) ((regs)->nip) |
87 | #define user_stack_pointer(regs) ((regs)->gpr[1]) | 87 | #define GET_USP(regs) ((regs)->gpr[1]) |
88 | #define GET_FP(regs) (0) | ||
89 | #define SET_FP(regs, val) | ||
90 | |||
91 | #ifdef CONFIG_SMP | ||
92 | extern unsigned long profile_pc(struct pt_regs *regs); | ||
93 | #define profile_pc profile_pc | ||
94 | #endif | ||
95 | |||
96 | #include <asm-generic/ptrace.h> | ||
97 | |||
88 | #define kernel_stack_pointer(regs) ((regs)->gpr[1]) | 98 | #define kernel_stack_pointer(regs) ((regs)->gpr[1]) |
89 | static inline int is_syscall_success(struct pt_regs *regs) | 99 | static inline int is_syscall_success(struct pt_regs *regs) |
90 | { | 100 | { |
@@ -99,12 +109,6 @@ static inline long regs_return_value(struct pt_regs *regs) | |||
99 | return -regs->gpr[3]; | 109 | return -regs->gpr[3]; |
100 | } | 110 | } |
101 | 111 | ||
102 | #ifdef CONFIG_SMP | ||
103 | extern unsigned long profile_pc(struct pt_regs *regs); | ||
104 | #else | ||
105 | #define profile_pc(regs) instruction_pointer(regs) | ||
106 | #endif | ||
107 | |||
108 | #ifdef __powerpc64__ | 112 | #ifdef __powerpc64__ |
109 | #define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1) | 113 | #define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1) |
110 | #else | 114 | #else |
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 4f80cf1ce77b..3e57a00b8cba 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S | |||
@@ -1213,7 +1213,7 @@ do_user_signal: /* r10 contains MSR_KERNEL here */ | |||
1213 | stw r3,_TRAP(r1) | 1213 | stw r3,_TRAP(r1) |
1214 | 2: addi r3,r1,STACK_FRAME_OVERHEAD | 1214 | 2: addi r3,r1,STACK_FRAME_OVERHEAD |
1215 | mr r4,r9 | 1215 | mr r4,r9 |
1216 | bl do_signal | 1216 | bl do_notify_resume |
1217 | REST_NVGPRS(r1) | 1217 | REST_NVGPRS(r1) |
1218 | b recheck | 1218 | b recheck |
1219 | 1219 | ||
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index d834425186ae..866462cbe2d8 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S | |||
@@ -751,12 +751,16 @@ user_work: | |||
751 | 751 | ||
752 | andi. r0,r4,_TIF_NEED_RESCHED | 752 | andi. r0,r4,_TIF_NEED_RESCHED |
753 | beq 1f | 753 | beq 1f |
754 | li r5,1 | ||
755 | TRACE_AND_RESTORE_IRQ(r5); | ||
754 | bl .schedule | 756 | bl .schedule |
755 | b .ret_from_except_lite | 757 | b .ret_from_except_lite |
756 | 758 | ||
757 | 1: bl .save_nvgprs | 759 | 1: bl .save_nvgprs |
760 | li r5,1 | ||
761 | TRACE_AND_RESTORE_IRQ(r5); | ||
758 | addi r3,r1,STACK_FRAME_OVERHEAD | 762 | addi r3,r1,STACK_FRAME_OVERHEAD |
759 | bl .do_signal | 763 | bl .do_notify_resume |
760 | b .ret_from_except | 764 | b .ret_from_except |
761 | 765 | ||
762 | unrecov_restore: | 766 | unrecov_restore: |
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index d4be7bb3dbdf..15c5a4f6de01 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S | |||
@@ -774,8 +774,8 @@ alignment_common: | |||
774 | program_check_common: | 774 | program_check_common: |
775 | EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN) | 775 | EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN) |
776 | bl .save_nvgprs | 776 | bl .save_nvgprs |
777 | DISABLE_INTS | ||
777 | addi r3,r1,STACK_FRAME_OVERHEAD | 778 | addi r3,r1,STACK_FRAME_OVERHEAD |
778 | ENABLE_INTS | ||
779 | bl .program_check_exception | 779 | bl .program_check_exception |
780 | b .ret_from_except | 780 | b .ret_from_except |
781 | 781 | ||
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 701d4aceb4f4..01e2877e8e04 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c | |||
@@ -118,10 +118,14 @@ static inline notrace void set_soft_enabled(unsigned long enable) | |||
118 | static inline notrace void decrementer_check_overflow(void) | 118 | static inline notrace void decrementer_check_overflow(void) |
119 | { | 119 | { |
120 | u64 now = get_tb_or_rtc(); | 120 | u64 now = get_tb_or_rtc(); |
121 | u64 *next_tb = &__get_cpu_var(decrementers_next_tb); | 121 | u64 *next_tb; |
122 | |||
123 | preempt_disable(); | ||
124 | next_tb = &__get_cpu_var(decrementers_next_tb); | ||
122 | 125 | ||
123 | if (now >= *next_tb) | 126 | if (now >= *next_tb) |
124 | set_dec(1); | 127 | set_dec(1); |
128 | preempt_enable(); | ||
125 | } | 129 | } |
126 | 130 | ||
127 | notrace void arch_local_irq_restore(unsigned long en) | 131 | notrace void arch_local_irq_restore(unsigned long en) |
diff --git a/arch/powerpc/kernel/perf_event.c b/arch/powerpc/kernel/perf_event.c index 10a140f82cb8..64483fde95c6 100644 --- a/arch/powerpc/kernel/perf_event.c +++ b/arch/powerpc/kernel/perf_event.c | |||
@@ -865,6 +865,7 @@ static void power_pmu_start(struct perf_event *event, int ef_flags) | |||
865 | { | 865 | { |
866 | unsigned long flags; | 866 | unsigned long flags; |
867 | s64 left; | 867 | s64 left; |
868 | unsigned long val; | ||
868 | 869 | ||
869 | if (!event->hw.idx || !event->hw.sample_period) | 870 | if (!event->hw.idx || !event->hw.sample_period) |
870 | return; | 871 | return; |
@@ -880,7 +881,12 @@ static void power_pmu_start(struct perf_event *event, int ef_flags) | |||
880 | 881 | ||
881 | event->hw.state = 0; | 882 | event->hw.state = 0; |
882 | left = local64_read(&event->hw.period_left); | 883 | left = local64_read(&event->hw.period_left); |
883 | write_pmc(event->hw.idx, left); | 884 | |
885 | val = 0; | ||
886 | if (left < 0x80000000L) | ||
887 | val = 0x80000000L - left; | ||
888 | |||
889 | write_pmc(event->hw.idx, val); | ||
884 | 890 | ||
885 | perf_event_update_userpage(event); | 891 | perf_event_update_userpage(event); |
886 | perf_pmu_enable(event->pmu); | 892 | perf_pmu_enable(event->pmu); |
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index ebe5766781aa..d817ab018486 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c | |||
@@ -566,12 +566,12 @@ static void show_instructions(struct pt_regs *regs) | |||
566 | */ | 566 | */ |
567 | if (!__kernel_text_address(pc) || | 567 | if (!__kernel_text_address(pc) || |
568 | __get_user(instr, (unsigned int __user *)pc)) { | 568 | __get_user(instr, (unsigned int __user *)pc)) { |
569 | printk("XXXXXXXX "); | 569 | printk(KERN_CONT "XXXXXXXX "); |
570 | } else { | 570 | } else { |
571 | if (regs->nip == pc) | 571 | if (regs->nip == pc) |
572 | printk("<%08x> ", instr); | 572 | printk(KERN_CONT "<%08x> ", instr); |
573 | else | 573 | else |
574 | printk("%08x ", instr); | 574 | printk(KERN_CONT "%08x ", instr); |
575 | } | 575 | } |
576 | 576 | ||
577 | pc += sizeof(int); | 577 | pc += sizeof(int); |
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 517b1d8f455b..9f843cdfee9e 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c | |||
@@ -716,7 +716,6 @@ static int __rtas_suspend_last_cpu(struct rtas_suspend_me_data *data, int wake_w | |||
716 | int cpu; | 716 | int cpu; |
717 | 717 | ||
718 | slb_set_size(SLB_MIN_SIZE); | 718 | slb_set_size(SLB_MIN_SIZE); |
719 | stop_topology_update(); | ||
720 | printk(KERN_DEBUG "calling ibm,suspend-me on cpu %i\n", smp_processor_id()); | 719 | printk(KERN_DEBUG "calling ibm,suspend-me on cpu %i\n", smp_processor_id()); |
721 | 720 | ||
722 | while (rc == H_MULTI_THREADS_ACTIVE && !atomic_read(&data->done) && | 721 | while (rc == H_MULTI_THREADS_ACTIVE && !atomic_read(&data->done) && |
@@ -732,7 +731,6 @@ static int __rtas_suspend_last_cpu(struct rtas_suspend_me_data *data, int wake_w | |||
732 | rc = atomic_read(&data->error); | 731 | rc = atomic_read(&data->error); |
733 | 732 | ||
734 | atomic_set(&data->error, rc); | 733 | atomic_set(&data->error, rc); |
735 | start_topology_update(); | ||
736 | pSeries_coalesce_init(); | 734 | pSeries_coalesce_init(); |
737 | 735 | ||
738 | if (wake_when_done) { | 736 | if (wake_when_done) { |
@@ -846,6 +844,7 @@ int rtas_ibm_suspend_me(struct rtas_args *args) | |||
846 | atomic_set(&data.error, 0); | 844 | atomic_set(&data.error, 0); |
847 | data.token = rtas_token("ibm,suspend-me"); | 845 | data.token = rtas_token("ibm,suspend-me"); |
848 | data.complete = &done; | 846 | data.complete = &done; |
847 | stop_topology_update(); | ||
849 | 848 | ||
850 | /* Call function on all CPUs. One of us will make the | 849 | /* Call function on all CPUs. One of us will make the |
851 | * rtas call | 850 | * rtas call |
@@ -858,6 +857,8 @@ int rtas_ibm_suspend_me(struct rtas_args *args) | |||
858 | if (atomic_read(&data.error) != 0) | 857 | if (atomic_read(&data.error) != 0) |
859 | printk(KERN_ERR "Error doing global join\n"); | 858 | printk(KERN_ERR "Error doing global join\n"); |
860 | 859 | ||
860 | start_topology_update(); | ||
861 | |||
861 | return atomic_read(&data.error); | 862 | return atomic_read(&data.error); |
862 | } | 863 | } |
863 | #else /* CONFIG_PPC_PSERIES */ | 864 | #else /* CONFIG_PPC_PSERIES */ |
diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index 2300426e531a..ac6e437b1021 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c | |||
@@ -11,6 +11,7 @@ | |||
11 | 11 | ||
12 | #include <linux/tracehook.h> | 12 | #include <linux/tracehook.h> |
13 | #include <linux/signal.h> | 13 | #include <linux/signal.h> |
14 | #include <linux/key.h> | ||
14 | #include <asm/hw_breakpoint.h> | 15 | #include <asm/hw_breakpoint.h> |
15 | #include <asm/uaccess.h> | 16 | #include <asm/uaccess.h> |
16 | #include <asm/unistd.h> | 17 | #include <asm/unistd.h> |
@@ -113,8 +114,9 @@ static void check_syscall_restart(struct pt_regs *regs, struct k_sigaction *ka, | |||
113 | } | 114 | } |
114 | } | 115 | } |
115 | 116 | ||
116 | static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs) | 117 | static int do_signal(struct pt_regs *regs) |
117 | { | 118 | { |
119 | sigset_t *oldset; | ||
118 | siginfo_t info; | 120 | siginfo_t info; |
119 | int signr; | 121 | int signr; |
120 | struct k_sigaction ka; | 122 | struct k_sigaction ka; |
@@ -123,7 +125,7 @@ static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs) | |||
123 | 125 | ||
124 | if (current_thread_info()->local_flags & _TLF_RESTORE_SIGMASK) | 126 | if (current_thread_info()->local_flags & _TLF_RESTORE_SIGMASK) |
125 | oldset = ¤t->saved_sigmask; | 127 | oldset = ¤t->saved_sigmask; |
126 | else if (!oldset) | 128 | else |
127 | oldset = ¤t->blocked; | 129 | oldset = ¤t->blocked; |
128 | 130 | ||
129 | signr = get_signal_to_deliver(&info, &ka, regs, NULL); | 131 | signr = get_signal_to_deliver(&info, &ka, regs, NULL); |
@@ -191,14 +193,16 @@ static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs) | |||
191 | return ret; | 193 | return ret; |
192 | } | 194 | } |
193 | 195 | ||
194 | void do_signal(struct pt_regs *regs, unsigned long thread_info_flags) | 196 | void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags) |
195 | { | 197 | { |
196 | if (thread_info_flags & _TIF_SIGPENDING) | 198 | if (thread_info_flags & _TIF_SIGPENDING) |
197 | do_signal_pending(NULL, regs); | 199 | do_signal(regs); |
198 | 200 | ||
199 | if (thread_info_flags & _TIF_NOTIFY_RESUME) { | 201 | if (thread_info_flags & _TIF_NOTIFY_RESUME) { |
200 | clear_thread_flag(TIF_NOTIFY_RESUME); | 202 | clear_thread_flag(TIF_NOTIFY_RESUME); |
201 | tracehook_notify_resume(regs); | 203 | tracehook_notify_resume(regs); |
204 | if (current->replacement_session_keyring) | ||
205 | key_replace_session_keyring(); | ||
202 | } | 206 | } |
203 | } | 207 | } |
204 | 208 | ||
diff --git a/arch/powerpc/kernel/signal.h b/arch/powerpc/kernel/signal.h index 6c0ddfc0603e..8dde973aaaf5 100644 --- a/arch/powerpc/kernel/signal.h +++ b/arch/powerpc/kernel/signal.h | |||
@@ -12,7 +12,7 @@ | |||
12 | 12 | ||
13 | #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) | 13 | #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) |
14 | 14 | ||
15 | extern void do_signal(struct pt_regs *regs, unsigned long thread_info_flags); | 15 | extern void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags); |
16 | 16 | ||
17 | extern void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, | 17 | extern void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, |
18 | size_t frame_size, int is_32); | 18 | size_t frame_size, int is_32); |
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c index a70bc1e385eb..f92b9ef7340e 100644 --- a/arch/powerpc/platforms/powernv/pci.c +++ b/arch/powerpc/platforms/powernv/pci.c | |||
@@ -52,32 +52,38 @@ static int pnv_msi_check_device(struct pci_dev* pdev, int nvec, int type) | |||
52 | 52 | ||
53 | static unsigned int pnv_get_one_msi(struct pnv_phb *phb) | 53 | static unsigned int pnv_get_one_msi(struct pnv_phb *phb) |
54 | { | 54 | { |
55 | unsigned int id; | 55 | unsigned long flags; |
56 | unsigned int id, rc; | ||
57 | |||
58 | spin_lock_irqsave(&phb->lock, flags); | ||
56 | 59 | ||
57 | spin_lock(&phb->lock); | ||
58 | id = find_next_zero_bit(phb->msi_map, phb->msi_count, phb->msi_next); | 60 | id = find_next_zero_bit(phb->msi_map, phb->msi_count, phb->msi_next); |
59 | if (id >= phb->msi_count && phb->msi_next) | 61 | if (id >= phb->msi_count && phb->msi_next) |
60 | id = find_next_zero_bit(phb->msi_map, phb->msi_count, 0); | 62 | id = find_next_zero_bit(phb->msi_map, phb->msi_count, 0); |
61 | if (id >= phb->msi_count) { | 63 | if (id >= phb->msi_count) { |
62 | spin_unlock(&phb->lock); | 64 | rc = 0; |
63 | return 0; | 65 | goto out; |
64 | } | 66 | } |
65 | __set_bit(id, phb->msi_map); | 67 | __set_bit(id, phb->msi_map); |
66 | spin_unlock(&phb->lock); | 68 | rc = id + phb->msi_base; |
67 | return id + phb->msi_base; | 69 | out: |
70 | spin_unlock_irqrestore(&phb->lock, flags); | ||
71 | return rc; | ||
68 | } | 72 | } |
69 | 73 | ||
70 | static void pnv_put_msi(struct pnv_phb *phb, unsigned int hwirq) | 74 | static void pnv_put_msi(struct pnv_phb *phb, unsigned int hwirq) |
71 | { | 75 | { |
76 | unsigned long flags; | ||
72 | unsigned int id; | 77 | unsigned int id; |
73 | 78 | ||
74 | if (WARN_ON(hwirq < phb->msi_base || | 79 | if (WARN_ON(hwirq < phb->msi_base || |
75 | hwirq >= (phb->msi_base + phb->msi_count))) | 80 | hwirq >= (phb->msi_base + phb->msi_count))) |
76 | return; | 81 | return; |
77 | id = hwirq - phb->msi_base; | 82 | id = hwirq - phb->msi_base; |
78 | spin_lock(&phb->lock); | 83 | |
84 | spin_lock_irqsave(&phb->lock, flags); | ||
79 | __clear_bit(id, phb->msi_map); | 85 | __clear_bit(id, phb->msi_map); |
80 | spin_unlock(&phb->lock); | 86 | spin_unlock_irqrestore(&phb->lock, flags); |
81 | } | 87 | } |
82 | 88 | ||
83 | static int pnv_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) | 89 | static int pnv_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) |
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 565869022e3d..c0b40af4ce4f 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c | |||
@@ -551,9 +551,9 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) | |||
551 | printk (KERN_ERR "EEH: %d reads ignored for recovering device at " | 551 | printk (KERN_ERR "EEH: %d reads ignored for recovering device at " |
552 | "location=%s driver=%s pci addr=%s\n", | 552 | "location=%s driver=%s pci addr=%s\n", |
553 | pdn->eeh_check_count, location, | 553 | pdn->eeh_check_count, location, |
554 | dev->driver->name, eeh_pci_name(dev)); | 554 | eeh_driver_name(dev), eeh_pci_name(dev)); |
555 | printk (KERN_ERR "EEH: Might be infinite loop in %s driver\n", | 555 | printk (KERN_ERR "EEH: Might be infinite loop in %s driver\n", |
556 | dev->driver->name); | 556 | eeh_driver_name(dev)); |
557 | dump_stack(); | 557 | dump_stack(); |
558 | } | 558 | } |
559 | goto dn_unlock; | 559 | goto dn_unlock; |
diff --git a/arch/powerpc/platforms/pseries/suspend.c b/arch/powerpc/platforms/pseries/suspend.c index b84a8b2238dd..47226e04126d 100644 --- a/arch/powerpc/platforms/pseries/suspend.c +++ b/arch/powerpc/platforms/pseries/suspend.c | |||
@@ -24,6 +24,7 @@ | |||
24 | #include <asm/machdep.h> | 24 | #include <asm/machdep.h> |
25 | #include <asm/mmu.h> | 25 | #include <asm/mmu.h> |
26 | #include <asm/rtas.h> | 26 | #include <asm/rtas.h> |
27 | #include <asm/topology.h> | ||
27 | 28 | ||
28 | static u64 stream_id; | 29 | static u64 stream_id; |
29 | static struct device suspend_dev; | 30 | static struct device suspend_dev; |
@@ -138,8 +139,11 @@ static ssize_t store_hibernate(struct device *dev, | |||
138 | ssleep(1); | 139 | ssleep(1); |
139 | } while (rc == -EAGAIN); | 140 | } while (rc == -EAGAIN); |
140 | 141 | ||
141 | if (!rc) | 142 | if (!rc) { |
143 | stop_topology_update(); | ||
142 | rc = pm_suspend(PM_SUSPEND_MEM); | 144 | rc = pm_suspend(PM_SUSPEND_MEM); |
145 | start_topology_update(); | ||
146 | } | ||
143 | 147 | ||
144 | stream_id = 0; | 148 | stream_id = 0; |
145 | 149 | ||
diff --git a/arch/powerpc/platforms/wsp/ics.c b/arch/powerpc/platforms/wsp/ics.c index 576874392543..97fe82ee8633 100644 --- a/arch/powerpc/platforms/wsp/ics.c +++ b/arch/powerpc/platforms/wsp/ics.c | |||
@@ -346,7 +346,7 @@ static int wsp_chip_set_affinity(struct irq_data *d, | |||
346 | * For the moment only implement delivery to all cpus or one cpu. | 346 | * For the moment only implement delivery to all cpus or one cpu. |
347 | * Get current irq_server for the given irq | 347 | * Get current irq_server for the given irq |
348 | */ | 348 | */ |
349 | ret = cache_hwirq_map(ics, d->irq, cpumask); | 349 | ret = cache_hwirq_map(ics, hw_irq, cpumask); |
350 | if (ret == -1) { | 350 | if (ret == -1) { |
351 | char cpulist[128]; | 351 | char cpulist[128]; |
352 | cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask); | 352 | cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask); |
diff --git a/arch/powerpc/platforms/wsp/smp.c b/arch/powerpc/platforms/wsp/smp.c index 71bd105f3863..0ba103ae83a5 100644 --- a/arch/powerpc/platforms/wsp/smp.c +++ b/arch/powerpc/platforms/wsp/smp.c | |||
@@ -71,7 +71,7 @@ int __devinit smp_a2_kick_cpu(int nr) | |||
71 | 71 | ||
72 | static int __init smp_a2_probe(void) | 72 | static int __init smp_a2_probe(void) |
73 | { | 73 | { |
74 | return cpus_weight(cpu_possible_map); | 74 | return num_possible_cpus(); |
75 | } | 75 | } |
76 | 76 | ||
77 | static struct smp_ops_t a2_smp_ops = { | 77 | static struct smp_ops_t a2_smp_ops = { |
diff --git a/arch/powerpc/platforms/wsp/wsp_pci.c b/arch/powerpc/platforms/wsp/wsp_pci.c index e0262cd0e2d3..d24b3acf858e 100644 --- a/arch/powerpc/platforms/wsp/wsp_pci.c +++ b/arch/powerpc/platforms/wsp/wsp_pci.c | |||
@@ -468,15 +468,15 @@ static void __init wsp_pcie_configure_hw(struct pci_controller *hose) | |||
468 | #define DUMP_REG(x) \ | 468 | #define DUMP_REG(x) \ |
469 | pr_debug("%-30s : 0x%016llx\n", #x, in_be64(hose->cfg_data + x)) | 469 | pr_debug("%-30s : 0x%016llx\n", #x, in_be64(hose->cfg_data + x)) |
470 | 470 | ||
471 | #ifdef CONFIG_WSP_DD1_WORKAROUND_BAD_PCIE_CLASS | 471 | /* |
472 | /* WSP DD1 has a bogus class code by default in the PCI-E | 472 | * Some WSP variants has a bogus class code by default in the PCI-E |
473 | * root complex's built-in P2P bridge */ | 473 | * root complex's built-in P2P bridge |
474 | */ | ||
474 | val = in_be64(hose->cfg_data + PCIE_REG_SYS_CFG1); | 475 | val = in_be64(hose->cfg_data + PCIE_REG_SYS_CFG1); |
475 | pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", val); | 476 | pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", val); |
476 | out_be64(hose->cfg_data + PCIE_REG_SYS_CFG1, | 477 | out_be64(hose->cfg_data + PCIE_REG_SYS_CFG1, |
477 | (val & ~PCIE_REG_SYS_CFG1_CLASS_CODE) | (PCI_CLASS_BRIDGE_PCI << 8)); | 478 | (val & ~PCIE_REG_SYS_CFG1_CLASS_CODE) | (PCI_CLASS_BRIDGE_PCI << 8)); |
478 | pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", in_be64(hose->cfg_data + PCIE_REG_SYS_CFG1)); | 479 | pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", in_be64(hose->cfg_data + PCIE_REG_SYS_CFG1)); |
479 | #endif /* CONFIG_WSP_DD1_WORKAROUND_BAD_PCIE_CLASS */ | ||
480 | 480 | ||
481 | #ifdef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS | 481 | #ifdef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS |
482 | /* XXX Disable TCE caching, it doesn't work on DD1 */ | 482 | /* XXX Disable TCE caching, it doesn't work on DD1 */ |
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 30eb17ecad49..6073288fed29 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c | |||
@@ -385,26 +385,36 @@ static void __init setup_pci_cmd(struct pci_controller *hose) | |||
385 | void fsl_pcibios_fixup_bus(struct pci_bus *bus) | 385 | void fsl_pcibios_fixup_bus(struct pci_bus *bus) |
386 | { | 386 | { |
387 | struct pci_controller *hose = pci_bus_to_host(bus); | 387 | struct pci_controller *hose = pci_bus_to_host(bus); |
388 | int i; | 388 | int i, is_pcie = 0, no_link; |
389 | 389 | ||
390 | if ((bus->parent == hose->bus) && | 390 | /* The root complex bridge comes up with bogus resources, |
391 | ((fsl_pcie_bus_fixup && | 391 | * we copy the PHB ones in. |
392 | early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) || | 392 | * |
393 | (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK))) | 393 | * With the current generic PCI code, the PHB bus no longer |
394 | { | 394 | * has bus->resource[0..4] set, so things are a bit more |
395 | for (i = 0; i < 4; ++i) { | 395 | * tricky. |
396 | */ | ||
397 | |||
398 | if (fsl_pcie_bus_fixup) | ||
399 | is_pcie = early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP); | ||
400 | no_link = !!(hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK); | ||
401 | |||
402 | if (bus->parent == hose->bus && (is_pcie || no_link)) { | ||
403 | for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; ++i) { | ||
396 | struct resource *res = bus->resource[i]; | 404 | struct resource *res = bus->resource[i]; |
397 | struct resource *par = bus->parent->resource[i]; | 405 | struct resource *par; |
398 | if (res) { | 406 | |
399 | res->start = 0; | 407 | if (!res) |
400 | res->end = 0; | 408 | continue; |
401 | res->flags = 0; | 409 | if (i == 0) |
402 | } | 410 | par = &hose->io_resource; |
403 | if (res && par) { | 411 | else if (i < 4) |
404 | res->start = par->start; | 412 | par = &hose->mem_resources[i-1]; |
405 | res->end = par->end; | 413 | else par = NULL; |
406 | res->flags = par->flags; | 414 | |
407 | } | 415 | res->start = par ? par->start : 0; |
416 | res->end = par ? par->end : 0; | ||
417 | res->flags = par ? par->flags : 0; | ||
408 | } | 418 | } |
409 | } | 419 | } |
410 | } | 420 | } |
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index d1727584230a..6d99a5fcc090 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig | |||
@@ -227,6 +227,9 @@ config COMPAT | |||
227 | config SYSVIPC_COMPAT | 227 | config SYSVIPC_COMPAT |
228 | def_bool y if COMPAT && SYSVIPC | 228 | def_bool y if COMPAT && SYSVIPC |
229 | 229 | ||
230 | config KEYS_COMPAT | ||
231 | def_bool y if COMPAT && KEYS | ||
232 | |||
230 | config AUDIT_ARCH | 233 | config AUDIT_ARCH |
231 | def_bool y | 234 | def_bool y |
232 | 235 | ||
diff --git a/arch/s390/include/asm/compat.h b/arch/s390/include/asm/compat.h index 2e49748b27da..234f1d859cea 100644 --- a/arch/s390/include/asm/compat.h +++ b/arch/s390/include/asm/compat.h | |||
@@ -172,13 +172,6 @@ static inline int is_compat_task(void) | |||
172 | return is_32bit_task(); | 172 | return is_32bit_task(); |
173 | } | 173 | } |
174 | 174 | ||
175 | #else | ||
176 | |||
177 | static inline int is_compat_task(void) | ||
178 | { | ||
179 | return 0; | ||
180 | } | ||
181 | |||
182 | #endif | 175 | #endif |
183 | 176 | ||
184 | static inline void __user *arch_compat_alloc_user_space(long len) | 177 | static inline void __user *arch_compat_alloc_user_space(long len) |
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index 18c51df9fe06..ff605a39cf43 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S | |||
@@ -662,7 +662,7 @@ ENTRY(sys32_getresuid16_wrapper) | |||
662 | ENTRY(sys32_poll_wrapper) | 662 | ENTRY(sys32_poll_wrapper) |
663 | llgtr %r2,%r2 # struct pollfd * | 663 | llgtr %r2,%r2 # struct pollfd * |
664 | llgfr %r3,%r3 # unsigned int | 664 | llgfr %r3,%r3 # unsigned int |
665 | lgfr %r4,%r4 # long | 665 | lgfr %r4,%r4 # int |
666 | jg sys_poll # branch to system call | 666 | jg sys_poll # branch to system call |
667 | 667 | ||
668 | ENTRY(sys32_setresgid16_wrapper) | 668 | ENTRY(sys32_setresgid16_wrapper) |
diff --git a/arch/s390/kernel/crash_dump.c b/arch/s390/kernel/crash_dump.c index 39f8fd4438fc..c383ce440d99 100644 --- a/arch/s390/kernel/crash_dump.c +++ b/arch/s390/kernel/crash_dump.c | |||
@@ -11,7 +11,6 @@ | |||
11 | #include <linux/module.h> | 11 | #include <linux/module.h> |
12 | #include <linux/gfp.h> | 12 | #include <linux/gfp.h> |
13 | #include <linux/slab.h> | 13 | #include <linux/slab.h> |
14 | #include <linux/crash_dump.h> | ||
15 | #include <linux/bootmem.h> | 14 | #include <linux/bootmem.h> |
16 | #include <linux/elf.h> | 15 | #include <linux/elf.h> |
17 | #include <asm/ipl.h> | 16 | #include <asm/ipl.h> |
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c index 3201ae447990..e795933eb2cb 100644 --- a/arch/s390/kernel/process.c +++ b/arch/s390/kernel/process.c | |||
@@ -29,7 +29,6 @@ | |||
29 | #include <asm/irq.h> | 29 | #include <asm/irq.h> |
30 | #include <asm/timer.h> | 30 | #include <asm/timer.h> |
31 | #include <asm/nmi.h> | 31 | #include <asm/nmi.h> |
32 | #include <asm/compat.h> | ||
33 | #include <asm/smp.h> | 32 | #include <asm/smp.h> |
34 | #include "entry.h" | 33 | #include "entry.h" |
35 | 34 | ||
@@ -76,7 +75,6 @@ static void default_idle(void) | |||
76 | if (test_thread_flag(TIF_MCCK_PENDING)) { | 75 | if (test_thread_flag(TIF_MCCK_PENDING)) { |
77 | local_mcck_enable(); | 76 | local_mcck_enable(); |
78 | local_irq_enable(); | 77 | local_irq_enable(); |
79 | s390_handle_mcck(); | ||
80 | return; | 78 | return; |
81 | } | 79 | } |
82 | trace_hardirqs_on(); | 80 | trace_hardirqs_on(); |
@@ -93,10 +91,12 @@ void cpu_idle(void) | |||
93 | for (;;) { | 91 | for (;;) { |
94 | tick_nohz_idle_enter(); | 92 | tick_nohz_idle_enter(); |
95 | rcu_idle_enter(); | 93 | rcu_idle_enter(); |
96 | while (!need_resched()) | 94 | while (!need_resched() && !test_thread_flag(TIF_MCCK_PENDING)) |
97 | default_idle(); | 95 | default_idle(); |
98 | rcu_idle_exit(); | 96 | rcu_idle_exit(); |
99 | tick_nohz_idle_exit(); | 97 | tick_nohz_idle_exit(); |
98 | if (test_thread_flag(TIF_MCCK_PENDING)) | ||
99 | s390_handle_mcck(); | ||
100 | preempt_enable_no_resched(); | 100 | preempt_enable_no_resched(); |
101 | schedule(); | 101 | schedule(); |
102 | preempt_disable(); | 102 | preempt_disable(); |
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 9d82ed4bcb27..61f95489d70c 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c | |||
@@ -20,8 +20,8 @@ | |||
20 | #include <linux/regset.h> | 20 | #include <linux/regset.h> |
21 | #include <linux/tracehook.h> | 21 | #include <linux/tracehook.h> |
22 | #include <linux/seccomp.h> | 22 | #include <linux/seccomp.h> |
23 | #include <linux/compat.h> | ||
23 | #include <trace/syscall.h> | 24 | #include <trace/syscall.h> |
24 | #include <asm/compat.h> | ||
25 | #include <asm/segment.h> | 25 | #include <asm/segment.h> |
26 | #include <asm/page.h> | 26 | #include <asm/page.h> |
27 | #include <asm/pgtable.h> | 27 | #include <asm/pgtable.h> |
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 354de0763eff..3b2efc81f34e 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c | |||
@@ -46,6 +46,7 @@ | |||
46 | #include <linux/kexec.h> | 46 | #include <linux/kexec.h> |
47 | #include <linux/crash_dump.h> | 47 | #include <linux/crash_dump.h> |
48 | #include <linux/memory.h> | 48 | #include <linux/memory.h> |
49 | #include <linux/compat.h> | ||
49 | 50 | ||
50 | #include <asm/ipl.h> | 51 | #include <asm/ipl.h> |
51 | #include <asm/uaccess.h> | 52 | #include <asm/uaccess.h> |
@@ -59,7 +60,6 @@ | |||
59 | #include <asm/ptrace.h> | 60 | #include <asm/ptrace.h> |
60 | #include <asm/sections.h> | 61 | #include <asm/sections.h> |
61 | #include <asm/ebcdic.h> | 62 | #include <asm/ebcdic.h> |
62 | #include <asm/compat.h> | ||
63 | #include <asm/kvm_virtio.h> | 63 | #include <asm/kvm_virtio.h> |
64 | #include <asm/diag.h> | 64 | #include <asm/diag.h> |
65 | 65 | ||
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c index a8ba840294ff..2d421d90fada 100644 --- a/arch/s390/kernel/signal.c +++ b/arch/s390/kernel/signal.c | |||
@@ -30,7 +30,6 @@ | |||
30 | #include <asm/ucontext.h> | 30 | #include <asm/ucontext.h> |
31 | #include <asm/uaccess.h> | 31 | #include <asm/uaccess.h> |
32 | #include <asm/lowcore.h> | 32 | #include <asm/lowcore.h> |
33 | #include <asm/compat.h> | ||
34 | #include "entry.h" | 33 | #include "entry.h" |
35 | 34 | ||
36 | #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) | 35 | #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) |
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index fa02f443f5f6..14da278febbf 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c | |||
@@ -113,11 +113,14 @@ static void fixup_clock_comparator(unsigned long long delta) | |||
113 | static int s390_next_ktime(ktime_t expires, | 113 | static int s390_next_ktime(ktime_t expires, |
114 | struct clock_event_device *evt) | 114 | struct clock_event_device *evt) |
115 | { | 115 | { |
116 | struct timespec ts; | ||
116 | u64 nsecs; | 117 | u64 nsecs; |
117 | 118 | ||
118 | nsecs = ktime_to_ns(ktime_sub(expires, ktime_get_monotonic_offset())); | 119 | ts.tv_sec = ts.tv_nsec = 0; |
120 | monotonic_to_bootbased(&ts); | ||
121 | nsecs = ktime_to_ns(ktime_add(timespec_to_ktime(ts), expires)); | ||
119 | do_div(nsecs, 125); | 122 | do_div(nsecs, 125); |
120 | S390_lowcore.clock_comparator = TOD_UNIX_EPOCH + (nsecs << 9); | 123 | S390_lowcore.clock_comparator = sched_clock_base_cc + (nsecs << 9); |
121 | set_clock_comparator(S390_lowcore.clock_comparator); | 124 | set_clock_comparator(S390_lowcore.clock_comparator); |
122 | return 0; | 125 | return 0; |
123 | } | 126 | } |
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 354dd39073ef..e8fcd928dc78 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c | |||
@@ -36,7 +36,6 @@ | |||
36 | #include <asm/pgtable.h> | 36 | #include <asm/pgtable.h> |
37 | #include <asm/irq.h> | 37 | #include <asm/irq.h> |
38 | #include <asm/mmu_context.h> | 38 | #include <asm/mmu_context.h> |
39 | #include <asm/compat.h> | ||
40 | #include "../kernel/entry.h" | 39 | #include "../kernel/entry.h" |
41 | 40 | ||
42 | #ifndef CONFIG_64BIT | 41 | #ifndef CONFIG_64BIT |
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c index 5d633019d8f3..50236610de83 100644 --- a/arch/s390/mm/init.c +++ b/arch/s390/mm/init.c | |||
@@ -223,16 +223,38 @@ void free_initrd_mem(unsigned long start, unsigned long end) | |||
223 | #ifdef CONFIG_MEMORY_HOTPLUG | 223 | #ifdef CONFIG_MEMORY_HOTPLUG |
224 | int arch_add_memory(int nid, u64 start, u64 size) | 224 | int arch_add_memory(int nid, u64 start, u64 size) |
225 | { | 225 | { |
226 | struct pglist_data *pgdat; | 226 | unsigned long zone_start_pfn, zone_end_pfn, nr_pages; |
227 | unsigned long start_pfn = PFN_DOWN(start); | ||
228 | unsigned long size_pages = PFN_DOWN(size); | ||
227 | struct zone *zone; | 229 | struct zone *zone; |
228 | int rc; | 230 | int rc; |
229 | 231 | ||
230 | pgdat = NODE_DATA(nid); | ||
231 | zone = pgdat->node_zones + ZONE_MOVABLE; | ||
232 | rc = vmem_add_mapping(start, size); | 232 | rc = vmem_add_mapping(start, size); |
233 | if (rc) | 233 | if (rc) |
234 | return rc; | 234 | return rc; |
235 | rc = __add_pages(nid, zone, PFN_DOWN(start), PFN_DOWN(size)); | 235 | for_each_zone(zone) { |
236 | if (zone_idx(zone) != ZONE_MOVABLE) { | ||
237 | /* Add range within existing zone limits */ | ||
238 | zone_start_pfn = zone->zone_start_pfn; | ||
239 | zone_end_pfn = zone->zone_start_pfn + | ||
240 | zone->spanned_pages; | ||
241 | } else { | ||
242 | /* Add remaining range to ZONE_MOVABLE */ | ||
243 | zone_start_pfn = start_pfn; | ||
244 | zone_end_pfn = start_pfn + size_pages; | ||
245 | } | ||
246 | if (start_pfn < zone_start_pfn || start_pfn >= zone_end_pfn) | ||
247 | continue; | ||
248 | nr_pages = (start_pfn + size_pages > zone_end_pfn) ? | ||
249 | zone_end_pfn - start_pfn : size_pages; | ||
250 | rc = __add_pages(nid, zone, start_pfn, nr_pages); | ||
251 | if (rc) | ||
252 | break; | ||
253 | start_pfn += nr_pages; | ||
254 | size_pages -= nr_pages; | ||
255 | if (!size_pages) | ||
256 | break; | ||
257 | } | ||
236 | if (rc) | 258 | if (rc) |
237 | vmem_remove_mapping(start, size); | 259 | vmem_remove_mapping(start, size); |
238 | return rc; | 260 | return rc; |
diff --git a/arch/s390/mm/mmap.c b/arch/s390/mm/mmap.c index f09c74881b7e..a0155c02e324 100644 --- a/arch/s390/mm/mmap.c +++ b/arch/s390/mm/mmap.c | |||
@@ -29,8 +29,8 @@ | |||
29 | #include <linux/mman.h> | 29 | #include <linux/mman.h> |
30 | #include <linux/module.h> | 30 | #include <linux/module.h> |
31 | #include <linux/random.h> | 31 | #include <linux/random.h> |
32 | #include <linux/compat.h> | ||
32 | #include <asm/pgalloc.h> | 33 | #include <asm/pgalloc.h> |
33 | #include <asm/compat.h> | ||
34 | 34 | ||
35 | static unsigned long stack_maxrandom_size(void) | 35 | static unsigned long stack_maxrandom_size(void) |
36 | { | 36 | { |
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index 9a4d02f64f16..51b0738e13d1 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c | |||
@@ -574,7 +574,7 @@ static inline void page_table_free_pgste(unsigned long *table) | |||
574 | page = pfn_to_page(__pa(table) >> PAGE_SHIFT); | 574 | page = pfn_to_page(__pa(table) >> PAGE_SHIFT); |
575 | mp = (struct gmap_pgtable *) page->index; | 575 | mp = (struct gmap_pgtable *) page->index; |
576 | BUG_ON(!list_empty(&mp->mapper)); | 576 | BUG_ON(!list_empty(&mp->mapper)); |
577 | pgtable_page_ctor(page); | 577 | pgtable_page_dtor(page); |
578 | atomic_set(&page->_mapcount, -1); | 578 | atomic_set(&page->_mapcount, -1); |
579 | kfree(mp); | 579 | kfree(mp); |
580 | __free_page(page); | 580 | __free_page(page); |
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 3c8db65c89e5..713fb58ca507 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig | |||
@@ -859,6 +859,7 @@ config PCI | |||
859 | depends on SYS_SUPPORTS_PCI | 859 | depends on SYS_SUPPORTS_PCI |
860 | select PCI_DOMAINS | 860 | select PCI_DOMAINS |
861 | select GENERIC_PCI_IOMAP | 861 | select GENERIC_PCI_IOMAP |
862 | select NO_GENERIC_PCI_IOPORT_MAP | ||
862 | help | 863 | help |
863 | Find out whether you have a PCI motherboard. PCI is the name of a | 864 | Find out whether you have a PCI motherboard. PCI is the name of a |
864 | bus system, i.e. the way the CPU talks to the other stuff inside | 865 | bus system, i.e. the way the CPU talks to the other stuff inside |
diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c index 0838154dd216..24b1ee410daa 100644 --- a/arch/sh/boards/board-sh7757lcr.c +++ b/arch/sh/boards/board-sh7757lcr.c | |||
@@ -169,6 +169,11 @@ static struct resource sh_eth_giga1_resources[] = { | |||
169 | .end = 0xfee00fff, | 169 | .end = 0xfee00fff, |
170 | .flags = IORESOURCE_MEM, | 170 | .flags = IORESOURCE_MEM, |
171 | }, { | 171 | }, { |
172 | /* TSU */ | ||
173 | .start = 0xfee01800, | ||
174 | .end = 0xfee01fff, | ||
175 | .flags = IORESOURCE_MEM, | ||
176 | }, { | ||
172 | .start = 316, | 177 | .start = 316, |
173 | .end = 316, | 178 | .end = 316, |
174 | .flags = IORESOURCE_IRQ, | 179 | .flags = IORESOURCE_IRQ, |
@@ -210,20 +215,13 @@ static struct resource sh_mmcif_resources[] = { | |||
210 | }, | 215 | }, |
211 | }; | 216 | }; |
212 | 217 | ||
213 | static struct sh_mmcif_dma sh7757lcr_mmcif_dma = { | ||
214 | .chan_priv_tx = { | ||
215 | .slave_id = SHDMA_SLAVE_MMCIF_TX, | ||
216 | }, | ||
217 | .chan_priv_rx = { | ||
218 | .slave_id = SHDMA_SLAVE_MMCIF_RX, | ||
219 | } | ||
220 | }; | ||
221 | |||
222 | static struct sh_mmcif_plat_data sh_mmcif_plat = { | 218 | static struct sh_mmcif_plat_data sh_mmcif_plat = { |
223 | .dma = &sh7757lcr_mmcif_dma, | ||
224 | .sup_pclk = 0x0f, | 219 | .sup_pclk = 0x0f, |
225 | .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, | 220 | .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | |
221 | MMC_CAP_NONREMOVABLE, | ||
226 | .ocr = MMC_VDD_32_33 | MMC_VDD_33_34, | 222 | .ocr = MMC_VDD_32_33 | MMC_VDD_33_34, |
223 | .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, | ||
224 | .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, | ||
227 | }; | 225 | }; |
228 | 226 | ||
229 | static struct platform_device sh_mmcif_device = { | 227 | static struct platform_device sh_mmcif_device = { |
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c index 6418e95c2b6b..ebd0f818a25f 100644 --- a/arch/sh/boards/mach-ap325rxa/setup.c +++ b/arch/sh/boards/mach-ap325rxa/setup.c | |||
@@ -22,6 +22,7 @@ | |||
22 | #include <linux/i2c.h> | 22 | #include <linux/i2c.h> |
23 | #include <linux/smsc911x.h> | 23 | #include <linux/smsc911x.h> |
24 | #include <linux/gpio.h> | 24 | #include <linux/gpio.h> |
25 | #include <linux/videodev2.h> | ||
25 | #include <media/ov772x.h> | 26 | #include <media/ov772x.h> |
26 | #include <media/soc_camera.h> | 27 | #include <media/soc_camera.h> |
27 | #include <media/soc_camera_platform.h> | 28 | #include <media/soc_camera_platform.h> |
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 033ef2ba621f..cde7c0085ced 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c | |||
@@ -29,9 +29,11 @@ | |||
29 | #include <linux/input.h> | 29 | #include <linux/input.h> |
30 | #include <linux/input/sh_keysc.h> | 30 | #include <linux/input/sh_keysc.h> |
31 | #include <linux/sh_eth.h> | 31 | #include <linux/sh_eth.h> |
32 | #include <linux/videodev2.h> | ||
32 | #include <video/sh_mobile_lcdc.h> | 33 | #include <video/sh_mobile_lcdc.h> |
33 | #include <sound/sh_fsi.h> | 34 | #include <sound/sh_fsi.h> |
34 | #include <media/sh_mobile_ceu.h> | 35 | #include <media/sh_mobile_ceu.h> |
36 | #include <media/soc_camera.h> | ||
35 | #include <media/tw9910.h> | 37 | #include <media/tw9910.h> |
36 | #include <media/mt9t112.h> | 38 | #include <media/mt9t112.h> |
37 | #include <asm/heartbeat.h> | 39 | #include <asm/heartbeat.h> |
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c index 2a18b06abdaf..5b382e1afaea 100644 --- a/arch/sh/boards/mach-kfr2r09/setup.c +++ b/arch/sh/boards/mach-kfr2r09/setup.c | |||
@@ -22,6 +22,7 @@ | |||
22 | #include <linux/input/sh_keysc.h> | 22 | #include <linux/input/sh_keysc.h> |
23 | #include <linux/i2c.h> | 23 | #include <linux/i2c.h> |
24 | #include <linux/usb/r8a66597.h> | 24 | #include <linux/usb/r8a66597.h> |
25 | #include <linux/videodev2.h> | ||
25 | #include <media/rj54n1cb0c.h> | 26 | #include <media/rj54n1cb0c.h> |
26 | #include <media/soc_camera.h> | 27 | #include <media/soc_camera.h> |
27 | #include <media/sh_mobile_ceu.h> | 28 | #include <media/sh_mobile_ceu.h> |
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index 68c3d6f42896..d37ba2720527 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c | |||
@@ -21,9 +21,11 @@ | |||
21 | #include <linux/delay.h> | 21 | #include <linux/delay.h> |
22 | #include <linux/clk.h> | 22 | #include <linux/clk.h> |
23 | #include <linux/gpio.h> | 23 | #include <linux/gpio.h> |
24 | #include <linux/videodev2.h> | ||
24 | #include <video/sh_mobile_lcdc.h> | 25 | #include <video/sh_mobile_lcdc.h> |
25 | #include <media/sh_mobile_ceu.h> | 26 | #include <media/sh_mobile_ceu.h> |
26 | #include <media/ov772x.h> | 27 | #include <media/ov772x.h> |
28 | #include <media/soc_camera.h> | ||
27 | #include <media/tw9910.h> | 29 | #include <media/tw9910.h> |
28 | #include <asm/clock.h> | 30 | #include <asm/clock.h> |
29 | #include <asm/machvec.h> | 31 | #include <asm/machvec.h> |
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 036fe1adaef1..2b07fc016950 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c | |||
@@ -24,6 +24,7 @@ | |||
24 | #include <linux/input/sh_keysc.h> | 24 | #include <linux/input/sh_keysc.h> |
25 | #include <linux/usb/r8a66597.h> | 25 | #include <linux/usb/r8a66597.h> |
26 | #include <linux/sh_eth.h> | 26 | #include <linux/sh_eth.h> |
27 | #include <linux/videodev2.h> | ||
27 | #include <video/sh_mobile_lcdc.h> | 28 | #include <video/sh_mobile_lcdc.h> |
28 | #include <media/sh_mobile_ceu.h> | 29 | #include <media/sh_mobile_ceu.h> |
29 | #include <sound/sh_fsi.h> | 30 | #include <sound/sh_fsi.h> |
diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index fa7b978cc727..fb8f14990743 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c | |||
@@ -74,7 +74,7 @@ struct pci_errors { | |||
74 | { SH4_PCIINT_MLCK, "master lock error" }, | 74 | { SH4_PCIINT_MLCK, "master lock error" }, |
75 | { SH4_PCIINT_TABT, "target-target abort" }, | 75 | { SH4_PCIINT_TABT, "target-target abort" }, |
76 | { SH4_PCIINT_TRET, "target retry time out" }, | 76 | { SH4_PCIINT_TRET, "target retry time out" }, |
77 | { SH4_PCIINT_MFDE, "master function disable erorr" }, | 77 | { SH4_PCIINT_MFDE, "master function disable error" }, |
78 | { SH4_PCIINT_PRTY, "address parity error" }, | 78 | { SH4_PCIINT_PRTY, "address parity error" }, |
79 | { SH4_PCIINT_SERR, "SERR" }, | 79 | { SH4_PCIINT_SERR, "SERR" }, |
80 | { SH4_PCIINT_TWDP, "data parity error for target write" }, | 80 | { SH4_PCIINT_TWDP, "data parity error for target write" }, |
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index 8f18dd090a66..1e7b0e2e764d 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c | |||
@@ -356,8 +356,8 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, | |||
356 | 356 | ||
357 | #ifndef CONFIG_GENERIC_IOMAP | 357 | #ifndef CONFIG_GENERIC_IOMAP |
358 | 358 | ||
359 | static void __iomem *ioport_map_pci(struct pci_dev *dev, | 359 | void __iomem *__pci_ioport_map(struct pci_dev *dev, |
360 | unsigned long port, unsigned int nr) | 360 | unsigned long port, unsigned int nr) |
361 | { | 361 | { |
362 | struct pci_channel *chan = dev->sysdata; | 362 | struct pci_channel *chan = dev->sysdata; |
363 | 363 | ||
diff --git a/arch/sh/include/asm/device.h b/arch/sh/include/asm/device.h index a1c9c0daec10..071bcb4d4bfd 100644 --- a/arch/sh/include/asm/device.h +++ b/arch/sh/include/asm/device.h | |||
@@ -3,9 +3,10 @@ | |||
3 | * | 3 | * |
4 | * This file is released under the GPLv2 | 4 | * This file is released under the GPLv2 |
5 | */ | 5 | */ |
6 | #ifndef __ASM_SH_DEVICE_H | ||
7 | #define __ASM_SH_DEVICE_H | ||
6 | 8 | ||
7 | struct dev_archdata { | 9 | #include <asm-generic/device.h> |
8 | }; | ||
9 | 10 | ||
10 | struct platform_device; | 11 | struct platform_device; |
11 | /* allocate contiguous memory chunk and fill in struct resource */ | 12 | /* allocate contiguous memory chunk and fill in struct resource */ |
@@ -14,5 +15,4 @@ int platform_resource_setup_memory(struct platform_device *pdev, | |||
14 | 15 | ||
15 | void plat_early_device_setup(void); | 16 | void plat_early_device_setup(void); |
16 | 17 | ||
17 | struct pdev_archdata { | 18 | #endif /* __ASM_SH_DEVICE_H */ |
18 | }; | ||
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c index b3c039a5064a..70bd96646f42 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c | |||
@@ -343,7 +343,7 @@ static struct clk_lookup lookups[] = { | |||
343 | CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[HWBLK_CEU1]), | 343 | CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[HWBLK_CEU1]), |
344 | CLKDEV_CON_ID("beu1", &mstp_clks[HWBLK_BEU1]), | 344 | CLKDEV_CON_ID("beu1", &mstp_clks[HWBLK_BEU1]), |
345 | CLKDEV_CON_ID("2ddmac0", &mstp_clks[HWBLK_2DDMAC]), | 345 | CLKDEV_CON_ID("2ddmac0", &mstp_clks[HWBLK_2DDMAC]), |
346 | CLKDEV_CON_ID("spu0", &mstp_clks[HWBLK_SPU]), | 346 | CLKDEV_DEV_ID("sh_fsi.0", &mstp_clks[HWBLK_SPU]), |
347 | CLKDEV_CON_ID("jpu0", &mstp_clks[HWBLK_JPU]), | 347 | CLKDEV_CON_ID("jpu0", &mstp_clks[HWBLK_JPU]), |
348 | CLKDEV_DEV_ID("sh-vou.0", &mstp_clks[HWBLK_VOU]), | 348 | CLKDEV_DEV_ID("sh-vou.0", &mstp_clks[HWBLK_VOU]), |
349 | CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU0]), | 349 | CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU0]), |
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c index a7b2da6b3a1a..2875e8be4f72 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c | |||
@@ -133,7 +133,7 @@ static struct resource spi0_resources[] = { | |||
133 | [0] = { | 133 | [0] = { |
134 | .start = 0xfe002000, | 134 | .start = 0xfe002000, |
135 | .end = 0xfe0020ff, | 135 | .end = 0xfe0020ff, |
136 | .flags = IORESOURCE_MEM, | 136 | .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, |
137 | }, | 137 | }, |
138 | [1] = { | 138 | [1] = { |
139 | .start = 86, | 139 | .start = 86, |
@@ -661,6 +661,25 @@ static struct platform_device spi0_device = { | |||
661 | .resource = spi0_resources, | 661 | .resource = spi0_resources, |
662 | }; | 662 | }; |
663 | 663 | ||
664 | static struct resource spi1_resources[] = { | ||
665 | { | ||
666 | .start = 0xffd8ee70, | ||
667 | .end = 0xffd8eeff, | ||
668 | .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT, | ||
669 | }, | ||
670 | { | ||
671 | .start = 54, | ||
672 | .flags = IORESOURCE_IRQ, | ||
673 | }, | ||
674 | }; | ||
675 | |||
676 | static struct platform_device spi1_device = { | ||
677 | .name = "sh_spi", | ||
678 | .id = 1, | ||
679 | .num_resources = ARRAY_SIZE(spi1_resources), | ||
680 | .resource = spi1_resources, | ||
681 | }; | ||
682 | |||
664 | static struct resource usb_ehci_resources[] = { | 683 | static struct resource usb_ehci_resources[] = { |
665 | [0] = { | 684 | [0] = { |
666 | .start = 0xfe4f1000, | 685 | .start = 0xfe4f1000, |
@@ -720,6 +739,7 @@ static struct platform_device *sh7757_devices[] __initdata = { | |||
720 | &dma2_device, | 739 | &dma2_device, |
721 | &dma3_device, | 740 | &dma3_device, |
722 | &spi0_device, | 741 | &spi0_device, |
742 | &spi1_device, | ||
723 | &usb_ehci_device, | 743 | &usb_ehci_device, |
724 | &usb_ohci_device, | 744 | &usb_ohci_device, |
725 | }; | 745 | }; |
diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c index 3147a9a6fb8b..f624174bf239 100644 --- a/arch/sh/kernel/smp.c +++ b/arch/sh/kernel/smp.c | |||
@@ -63,7 +63,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) | |||
63 | mp_ops->prepare_cpus(max_cpus); | 63 | mp_ops->prepare_cpus(max_cpus); |
64 | 64 | ||
65 | #ifndef CONFIG_HOTPLUG_CPU | 65 | #ifndef CONFIG_HOTPLUG_CPU |
66 | init_cpu_present(&cpu_possible_map); | 66 | init_cpu_present(cpu_possible_mask); |
67 | #endif | 67 | #endif |
68 | } | 68 | } |
69 | 69 | ||
diff --git a/arch/sh/kernel/topology.c b/arch/sh/kernel/topology.c index 4649a6ff0cfe..772caffba22f 100644 --- a/arch/sh/kernel/topology.c +++ b/arch/sh/kernel/topology.c | |||
@@ -27,7 +27,7 @@ static cpumask_t cpu_coregroup_map(unsigned int cpu) | |||
27 | * Presently all SH-X3 SMP cores are multi-cores, so just keep it | 27 | * Presently all SH-X3 SMP cores are multi-cores, so just keep it |
28 | * simple until we have a method for determining topology.. | 28 | * simple until we have a method for determining topology.. |
29 | */ | 29 | */ |
30 | return cpu_possible_map; | 30 | return *cpu_possible_mask; |
31 | } | 31 | } |
32 | 32 | ||
33 | const struct cpumask *cpu_coregroup_mask(unsigned int cpu) | 33 | const struct cpumask *cpu_coregroup_mask(unsigned int cpu) |
diff --git a/arch/sh/mm/cache-sh2a.c b/arch/sh/mm/cache-sh2a.c index ae08cbbfa569..949e2d3138a0 100644 --- a/arch/sh/mm/cache-sh2a.c +++ b/arch/sh/mm/cache-sh2a.c | |||
@@ -23,6 +23,7 @@ | |||
23 | #define MAX_OCACHE_PAGES 32 | 23 | #define MAX_OCACHE_PAGES 32 |
24 | #define MAX_ICACHE_PAGES 32 | 24 | #define MAX_ICACHE_PAGES 32 |
25 | 25 | ||
26 | #ifdef CONFIG_CACHE_WRITEBACK | ||
26 | static void sh2a_flush_oc_line(unsigned long v, int way) | 27 | static void sh2a_flush_oc_line(unsigned long v, int way) |
27 | { | 28 | { |
28 | unsigned long addr = (v & 0x000007f0) | (way << 11); | 29 | unsigned long addr = (v & 0x000007f0) | (way << 11); |
@@ -34,6 +35,7 @@ static void sh2a_flush_oc_line(unsigned long v, int way) | |||
34 | __raw_writel(data, CACHE_OC_ADDRESS_ARRAY | addr); | 35 | __raw_writel(data, CACHE_OC_ADDRESS_ARRAY | addr); |
35 | } | 36 | } |
36 | } | 37 | } |
38 | #endif | ||
37 | 39 | ||
38 | static void sh2a_invalidate_line(unsigned long cache_addr, unsigned long v) | 40 | static void sh2a_invalidate_line(unsigned long cache_addr, unsigned long v) |
39 | { | 41 | { |
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 96657992a72e..ca5580e4d813 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig | |||
@@ -33,6 +33,7 @@ config SPARC | |||
33 | config SPARC32 | 33 | config SPARC32 |
34 | def_bool !64BIT | 34 | def_bool !64BIT |
35 | select GENERIC_ATOMIC64 | 35 | select GENERIC_ATOMIC64 |
36 | select CLZ_TAB | ||
36 | 37 | ||
37 | config SPARC64 | 38 | config SPARC64 |
38 | def_bool 64BIT | 39 | def_bool 64BIT |
diff --git a/arch/sparc/lib/divdi3.S b/arch/sparc/lib/divdi3.S index 681b3683da9e..d74bc0925f2d 100644 --- a/arch/sparc/lib/divdi3.S +++ b/arch/sparc/lib/divdi3.S | |||
@@ -17,23 +17,9 @@ along with GNU CC; see the file COPYING. If not, write to | |||
17 | the Free Software Foundation, 59 Temple Place - Suite 330, | 17 | the Free Software Foundation, 59 Temple Place - Suite 330, |
18 | Boston, MA 02111-1307, USA. */ | 18 | Boston, MA 02111-1307, USA. */ |
19 | 19 | ||
20 | .data | ||
21 | .align 8 | ||
22 | .globl __clz_tab | ||
23 | __clz_tab: | ||
24 | .byte 0,1,2,2,3,3,3,3,4,4,4,4,4,4,4,4,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5 | ||
25 | .byte 6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6 | ||
26 | .byte 7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7 | ||
27 | .byte 7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7 | ||
28 | .byte 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8 | ||
29 | .byte 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8 | ||
30 | .byte 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8 | ||
31 | .byte 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8 | ||
32 | .size __clz_tab,256 | ||
33 | .global .udiv | ||
34 | |||
35 | .text | 20 | .text |
36 | .align 4 | 21 | .align 4 |
22 | .global .udiv | ||
37 | .globl __divdi3 | 23 | .globl __divdi3 |
38 | __divdi3: | 24 | __divdi3: |
39 | save %sp,-104,%sp | 25 | save %sp,-104,%sp |
diff --git a/arch/x86/include/asm/cmpxchg.h b/arch/x86/include/asm/cmpxchg.h index 0c9fa2745f13..b3b733262909 100644 --- a/arch/x86/include/asm/cmpxchg.h +++ b/arch/x86/include/asm/cmpxchg.h | |||
@@ -145,13 +145,13 @@ extern void __add_wrong_size(void) | |||
145 | 145 | ||
146 | #ifdef __HAVE_ARCH_CMPXCHG | 146 | #ifdef __HAVE_ARCH_CMPXCHG |
147 | #define cmpxchg(ptr, old, new) \ | 147 | #define cmpxchg(ptr, old, new) \ |
148 | __cmpxchg((ptr), (old), (new), sizeof(*ptr)) | 148 | __cmpxchg(ptr, old, new, sizeof(*(ptr))) |
149 | 149 | ||
150 | #define sync_cmpxchg(ptr, old, new) \ | 150 | #define sync_cmpxchg(ptr, old, new) \ |
151 | __sync_cmpxchg((ptr), (old), (new), sizeof(*ptr)) | 151 | __sync_cmpxchg(ptr, old, new, sizeof(*(ptr))) |
152 | 152 | ||
153 | #define cmpxchg_local(ptr, old, new) \ | 153 | #define cmpxchg_local(ptr, old, new) \ |
154 | __cmpxchg_local((ptr), (old), (new), sizeof(*ptr)) | 154 | __cmpxchg_local(ptr, old, new, sizeof(*(ptr))) |
155 | #endif | 155 | #endif |
156 | 156 | ||
157 | /* | 157 | /* |
diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h index 6919e936345b..247904945d3f 100644 --- a/arch/x86/include/asm/i387.h +++ b/arch/x86/include/asm/i387.h | |||
@@ -29,10 +29,11 @@ extern unsigned int sig_xstate_size; | |||
29 | extern void fpu_init(void); | 29 | extern void fpu_init(void); |
30 | extern void mxcsr_feature_mask_init(void); | 30 | extern void mxcsr_feature_mask_init(void); |
31 | extern int init_fpu(struct task_struct *child); | 31 | extern int init_fpu(struct task_struct *child); |
32 | extern asmlinkage void math_state_restore(void); | 32 | extern void math_state_restore(void); |
33 | extern void __math_state_restore(void); | ||
34 | extern int dump_fpu(struct pt_regs *, struct user_i387_struct *); | 33 | extern int dump_fpu(struct pt_regs *, struct user_i387_struct *); |
35 | 34 | ||
35 | DECLARE_PER_CPU(struct task_struct *, fpu_owner_task); | ||
36 | |||
36 | extern user_regset_active_fn fpregs_active, xfpregs_active; | 37 | extern user_regset_active_fn fpregs_active, xfpregs_active; |
37 | extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get, | 38 | extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get, |
38 | xstateregs_get; | 39 | xstateregs_get; |
@@ -212,19 +213,11 @@ static inline void fpu_fxsave(struct fpu *fpu) | |||
212 | 213 | ||
213 | #endif /* CONFIG_X86_64 */ | 214 | #endif /* CONFIG_X86_64 */ |
214 | 215 | ||
215 | /* We need a safe address that is cheap to find and that is already | ||
216 | in L1 during context switch. The best choices are unfortunately | ||
217 | different for UP and SMP */ | ||
218 | #ifdef CONFIG_SMP | ||
219 | #define safe_address (__per_cpu_offset[0]) | ||
220 | #else | ||
221 | #define safe_address (__get_cpu_var(kernel_cpustat).cpustat[CPUTIME_USER]) | ||
222 | #endif | ||
223 | |||
224 | /* | 216 | /* |
225 | * These must be called with preempt disabled | 217 | * These must be called with preempt disabled. Returns |
218 | * 'true' if the FPU state is still intact. | ||
226 | */ | 219 | */ |
227 | static inline void fpu_save_init(struct fpu *fpu) | 220 | static inline int fpu_save_init(struct fpu *fpu) |
228 | { | 221 | { |
229 | if (use_xsave()) { | 222 | if (use_xsave()) { |
230 | fpu_xsave(fpu); | 223 | fpu_xsave(fpu); |
@@ -233,33 +226,33 @@ static inline void fpu_save_init(struct fpu *fpu) | |||
233 | * xsave header may indicate the init state of the FP. | 226 | * xsave header may indicate the init state of the FP. |
234 | */ | 227 | */ |
235 | if (!(fpu->state->xsave.xsave_hdr.xstate_bv & XSTATE_FP)) | 228 | if (!(fpu->state->xsave.xsave_hdr.xstate_bv & XSTATE_FP)) |
236 | return; | 229 | return 1; |
237 | } else if (use_fxsr()) { | 230 | } else if (use_fxsr()) { |
238 | fpu_fxsave(fpu); | 231 | fpu_fxsave(fpu); |
239 | } else { | 232 | } else { |
240 | asm volatile("fnsave %[fx]; fwait" | 233 | asm volatile("fnsave %[fx]; fwait" |
241 | : [fx] "=m" (fpu->state->fsave)); | 234 | : [fx] "=m" (fpu->state->fsave)); |
242 | return; | 235 | return 0; |
243 | } | 236 | } |
244 | 237 | ||
245 | if (unlikely(fpu->state->fxsave.swd & X87_FSW_ES)) | 238 | /* |
239 | * If exceptions are pending, we need to clear them so | ||
240 | * that we don't randomly get exceptions later. | ||
241 | * | ||
242 | * FIXME! Is this perhaps only true for the old-style | ||
243 | * irq13 case? Maybe we could leave the x87 state | ||
244 | * intact otherwise? | ||
245 | */ | ||
246 | if (unlikely(fpu->state->fxsave.swd & X87_FSW_ES)) { | ||
246 | asm volatile("fnclex"); | 247 | asm volatile("fnclex"); |
247 | 248 | return 0; | |
248 | /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception | 249 | } |
249 | is pending. Clear the x87 state here by setting it to fixed | 250 | return 1; |
250 | values. safe_address is a random variable that should be in L1 */ | ||
251 | alternative_input( | ||
252 | ASM_NOP8 ASM_NOP2, | ||
253 | "emms\n\t" /* clear stack tags */ | ||
254 | "fildl %P[addr]", /* set F?P to defined value */ | ||
255 | X86_FEATURE_FXSAVE_LEAK, | ||
256 | [addr] "m" (safe_address)); | ||
257 | } | 251 | } |
258 | 252 | ||
259 | static inline void __save_init_fpu(struct task_struct *tsk) | 253 | static inline int __save_init_fpu(struct task_struct *tsk) |
260 | { | 254 | { |
261 | fpu_save_init(&tsk->thread.fpu); | 255 | return fpu_save_init(&tsk->thread.fpu); |
262 | task_thread_info(tsk)->status &= ~TS_USEDFPU; | ||
263 | } | 256 | } |
264 | 257 | ||
265 | static inline int fpu_fxrstor_checking(struct fpu *fpu) | 258 | static inline int fpu_fxrstor_checking(struct fpu *fpu) |
@@ -277,44 +270,212 @@ static inline int fpu_restore_checking(struct fpu *fpu) | |||
277 | 270 | ||
278 | static inline int restore_fpu_checking(struct task_struct *tsk) | 271 | static inline int restore_fpu_checking(struct task_struct *tsk) |
279 | { | 272 | { |
273 | /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception | ||
274 | is pending. Clear the x87 state here by setting it to fixed | ||
275 | values. "m" is a random variable that should be in L1 */ | ||
276 | alternative_input( | ||
277 | ASM_NOP8 ASM_NOP2, | ||
278 | "emms\n\t" /* clear stack tags */ | ||
279 | "fildl %P[addr]", /* set F?P to defined value */ | ||
280 | X86_FEATURE_FXSAVE_LEAK, | ||
281 | [addr] "m" (tsk->thread.fpu.has_fpu)); | ||
282 | |||
280 | return fpu_restore_checking(&tsk->thread.fpu); | 283 | return fpu_restore_checking(&tsk->thread.fpu); |
281 | } | 284 | } |
282 | 285 | ||
283 | /* | 286 | /* |
284 | * Signal frame handlers... | 287 | * Software FPU state helpers. Careful: these need to |
288 | * be preemption protection *and* they need to be | ||
289 | * properly paired with the CR0.TS changes! | ||
285 | */ | 290 | */ |
286 | extern int save_i387_xstate(void __user *buf); | 291 | static inline int __thread_has_fpu(struct task_struct *tsk) |
287 | extern int restore_i387_xstate(void __user *buf); | 292 | { |
293 | return tsk->thread.fpu.has_fpu; | ||
294 | } | ||
288 | 295 | ||
289 | static inline void __unlazy_fpu(struct task_struct *tsk) | 296 | /* Must be paired with an 'stts' after! */ |
297 | static inline void __thread_clear_has_fpu(struct task_struct *tsk) | ||
290 | { | 298 | { |
291 | if (task_thread_info(tsk)->status & TS_USEDFPU) { | 299 | tsk->thread.fpu.has_fpu = 0; |
292 | __save_init_fpu(tsk); | 300 | percpu_write(fpu_owner_task, NULL); |
293 | stts(); | 301 | } |
294 | } else | 302 | |
295 | tsk->fpu_counter = 0; | 303 | /* Must be paired with a 'clts' before! */ |
304 | static inline void __thread_set_has_fpu(struct task_struct *tsk) | ||
305 | { | ||
306 | tsk->thread.fpu.has_fpu = 1; | ||
307 | percpu_write(fpu_owner_task, tsk); | ||
308 | } | ||
309 | |||
310 | /* | ||
311 | * Encapsulate the CR0.TS handling together with the | ||
312 | * software flag. | ||
313 | * | ||
314 | * These generally need preemption protection to work, | ||
315 | * do try to avoid using these on their own. | ||
316 | */ | ||
317 | static inline void __thread_fpu_end(struct task_struct *tsk) | ||
318 | { | ||
319 | __thread_clear_has_fpu(tsk); | ||
320 | stts(); | ||
321 | } | ||
322 | |||
323 | static inline void __thread_fpu_begin(struct task_struct *tsk) | ||
324 | { | ||
325 | clts(); | ||
326 | __thread_set_has_fpu(tsk); | ||
327 | } | ||
328 | |||
329 | /* | ||
330 | * FPU state switching for scheduling. | ||
331 | * | ||
332 | * This is a two-stage process: | ||
333 | * | ||
334 | * - switch_fpu_prepare() saves the old state and | ||
335 | * sets the new state of the CR0.TS bit. This is | ||
336 | * done within the context of the old process. | ||
337 | * | ||
338 | * - switch_fpu_finish() restores the new state as | ||
339 | * necessary. | ||
340 | */ | ||
341 | typedef struct { int preload; } fpu_switch_t; | ||
342 | |||
343 | /* | ||
344 | * FIXME! We could do a totally lazy restore, but we need to | ||
345 | * add a per-cpu "this was the task that last touched the FPU | ||
346 | * on this CPU" variable, and the task needs to have a "I last | ||
347 | * touched the FPU on this CPU" and check them. | ||
348 | * | ||
349 | * We don't do that yet, so "fpu_lazy_restore()" always returns | ||
350 | * false, but some day.. | ||
351 | */ | ||
352 | static inline int fpu_lazy_restore(struct task_struct *new, unsigned int cpu) | ||
353 | { | ||
354 | return new == percpu_read_stable(fpu_owner_task) && | ||
355 | cpu == new->thread.fpu.last_cpu; | ||
356 | } | ||
357 | |||
358 | static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct task_struct *new, int cpu) | ||
359 | { | ||
360 | fpu_switch_t fpu; | ||
361 | |||
362 | fpu.preload = tsk_used_math(new) && new->fpu_counter > 5; | ||
363 | if (__thread_has_fpu(old)) { | ||
364 | if (!__save_init_fpu(old)) | ||
365 | cpu = ~0; | ||
366 | old->thread.fpu.last_cpu = cpu; | ||
367 | old->thread.fpu.has_fpu = 0; /* But leave fpu_owner_task! */ | ||
368 | |||
369 | /* Don't change CR0.TS if we just switch! */ | ||
370 | if (fpu.preload) { | ||
371 | new->fpu_counter++; | ||
372 | __thread_set_has_fpu(new); | ||
373 | prefetch(new->thread.fpu.state); | ||
374 | } else | ||
375 | stts(); | ||
376 | } else { | ||
377 | old->fpu_counter = 0; | ||
378 | old->thread.fpu.last_cpu = ~0; | ||
379 | if (fpu.preload) { | ||
380 | new->fpu_counter++; | ||
381 | if (fpu_lazy_restore(new, cpu)) | ||
382 | fpu.preload = 0; | ||
383 | else | ||
384 | prefetch(new->thread.fpu.state); | ||
385 | __thread_fpu_begin(new); | ||
386 | } | ||
387 | } | ||
388 | return fpu; | ||
389 | } | ||
390 | |||
391 | /* | ||
392 | * By the time this gets called, we've already cleared CR0.TS and | ||
393 | * given the process the FPU if we are going to preload the FPU | ||
394 | * state - all we need to do is to conditionally restore the register | ||
395 | * state itself. | ||
396 | */ | ||
397 | static inline void switch_fpu_finish(struct task_struct *new, fpu_switch_t fpu) | ||
398 | { | ||
399 | if (fpu.preload) { | ||
400 | if (unlikely(restore_fpu_checking(new))) | ||
401 | __thread_fpu_end(new); | ||
402 | } | ||
296 | } | 403 | } |
297 | 404 | ||
405 | /* | ||
406 | * Signal frame handlers... | ||
407 | */ | ||
408 | extern int save_i387_xstate(void __user *buf); | ||
409 | extern int restore_i387_xstate(void __user *buf); | ||
410 | |||
298 | static inline void __clear_fpu(struct task_struct *tsk) | 411 | static inline void __clear_fpu(struct task_struct *tsk) |
299 | { | 412 | { |
300 | if (task_thread_info(tsk)->status & TS_USEDFPU) { | 413 | if (__thread_has_fpu(tsk)) { |
301 | /* Ignore delayed exceptions from user space */ | 414 | /* Ignore delayed exceptions from user space */ |
302 | asm volatile("1: fwait\n" | 415 | asm volatile("1: fwait\n" |
303 | "2:\n" | 416 | "2:\n" |
304 | _ASM_EXTABLE(1b, 2b)); | 417 | _ASM_EXTABLE(1b, 2b)); |
305 | task_thread_info(tsk)->status &= ~TS_USEDFPU; | 418 | __thread_fpu_end(tsk); |
306 | stts(); | ||
307 | } | 419 | } |
308 | } | 420 | } |
309 | 421 | ||
422 | /* | ||
423 | * Were we in an interrupt that interrupted kernel mode? | ||
424 | * | ||
425 | * We can do a kernel_fpu_begin/end() pair *ONLY* if that | ||
426 | * pair does nothing at all: the thread must not have fpu (so | ||
427 | * that we don't try to save the FPU state), and TS must | ||
428 | * be set (so that the clts/stts pair does nothing that is | ||
429 | * visible in the interrupted kernel thread). | ||
430 | */ | ||
431 | static inline bool interrupted_kernel_fpu_idle(void) | ||
432 | { | ||
433 | return !__thread_has_fpu(current) && | ||
434 | (read_cr0() & X86_CR0_TS); | ||
435 | } | ||
436 | |||
437 | /* | ||
438 | * Were we in user mode (or vm86 mode) when we were | ||
439 | * interrupted? | ||
440 | * | ||
441 | * Doing kernel_fpu_begin/end() is ok if we are running | ||
442 | * in an interrupt context from user mode - we'll just | ||
443 | * save the FPU state as required. | ||
444 | */ | ||
445 | static inline bool interrupted_user_mode(void) | ||
446 | { | ||
447 | struct pt_regs *regs = get_irq_regs(); | ||
448 | return regs && user_mode_vm(regs); | ||
449 | } | ||
450 | |||
451 | /* | ||
452 | * Can we use the FPU in kernel mode with the | ||
453 | * whole "kernel_fpu_begin/end()" sequence? | ||
454 | * | ||
455 | * It's always ok in process context (ie "not interrupt") | ||
456 | * but it is sometimes ok even from an irq. | ||
457 | */ | ||
458 | static inline bool irq_fpu_usable(void) | ||
459 | { | ||
460 | return !in_interrupt() || | ||
461 | interrupted_user_mode() || | ||
462 | interrupted_kernel_fpu_idle(); | ||
463 | } | ||
464 | |||
310 | static inline void kernel_fpu_begin(void) | 465 | static inline void kernel_fpu_begin(void) |
311 | { | 466 | { |
312 | struct thread_info *me = current_thread_info(); | 467 | struct task_struct *me = current; |
468 | |||
469 | WARN_ON_ONCE(!irq_fpu_usable()); | ||
313 | preempt_disable(); | 470 | preempt_disable(); |
314 | if (me->status & TS_USEDFPU) | 471 | if (__thread_has_fpu(me)) { |
315 | __save_init_fpu(me->task); | 472 | __save_init_fpu(me); |
316 | else | 473 | __thread_clear_has_fpu(me); |
474 | /* We do 'stts()' in kernel_fpu_end() */ | ||
475 | } else { | ||
476 | percpu_write(fpu_owner_task, NULL); | ||
317 | clts(); | 477 | clts(); |
478 | } | ||
318 | } | 479 | } |
319 | 480 | ||
320 | static inline void kernel_fpu_end(void) | 481 | static inline void kernel_fpu_end(void) |
@@ -323,14 +484,6 @@ static inline void kernel_fpu_end(void) | |||
323 | preempt_enable(); | 484 | preempt_enable(); |
324 | } | 485 | } |
325 | 486 | ||
326 | static inline bool irq_fpu_usable(void) | ||
327 | { | ||
328 | struct pt_regs *regs; | ||
329 | |||
330 | return !in_interrupt() || !(regs = get_irq_regs()) || \ | ||
331 | user_mode(regs) || (read_cr0() & X86_CR0_TS); | ||
332 | } | ||
333 | |||
334 | /* | 487 | /* |
335 | * Some instructions like VIA's padlock instructions generate a spurious | 488 | * Some instructions like VIA's padlock instructions generate a spurious |
336 | * DNA fault but don't modify SSE registers. And these instructions | 489 | * DNA fault but don't modify SSE registers. And these instructions |
@@ -363,20 +516,64 @@ static inline void irq_ts_restore(int TS_state) | |||
363 | } | 516 | } |
364 | 517 | ||
365 | /* | 518 | /* |
519 | * The question "does this thread have fpu access?" | ||
520 | * is slightly racy, since preemption could come in | ||
521 | * and revoke it immediately after the test. | ||
522 | * | ||
523 | * However, even in that very unlikely scenario, | ||
524 | * we can just assume we have FPU access - typically | ||
525 | * to save the FP state - we'll just take a #NM | ||
526 | * fault and get the FPU access back. | ||
527 | * | ||
528 | * The actual user_fpu_begin/end() functions | ||
529 | * need to be preemption-safe, though. | ||
530 | * | ||
531 | * NOTE! user_fpu_end() must be used only after you | ||
532 | * have saved the FP state, and user_fpu_begin() must | ||
533 | * be used only immediately before restoring it. | ||
534 | * These functions do not do any save/restore on | ||
535 | * their own. | ||
536 | */ | ||
537 | static inline int user_has_fpu(void) | ||
538 | { | ||
539 | return __thread_has_fpu(current); | ||
540 | } | ||
541 | |||
542 | static inline void user_fpu_end(void) | ||
543 | { | ||
544 | preempt_disable(); | ||
545 | __thread_fpu_end(current); | ||
546 | preempt_enable(); | ||
547 | } | ||
548 | |||
549 | static inline void user_fpu_begin(void) | ||
550 | { | ||
551 | preempt_disable(); | ||
552 | if (!user_has_fpu()) | ||
553 | __thread_fpu_begin(current); | ||
554 | preempt_enable(); | ||
555 | } | ||
556 | |||
557 | /* | ||
366 | * These disable preemption on their own and are safe | 558 | * These disable preemption on their own and are safe |
367 | */ | 559 | */ |
368 | static inline void save_init_fpu(struct task_struct *tsk) | 560 | static inline void save_init_fpu(struct task_struct *tsk) |
369 | { | 561 | { |
562 | WARN_ON_ONCE(!__thread_has_fpu(tsk)); | ||
370 | preempt_disable(); | 563 | preempt_disable(); |
371 | __save_init_fpu(tsk); | 564 | __save_init_fpu(tsk); |
372 | stts(); | 565 | __thread_fpu_end(tsk); |
373 | preempt_enable(); | 566 | preempt_enable(); |
374 | } | 567 | } |
375 | 568 | ||
376 | static inline void unlazy_fpu(struct task_struct *tsk) | 569 | static inline void unlazy_fpu(struct task_struct *tsk) |
377 | { | 570 | { |
378 | preempt_disable(); | 571 | preempt_disable(); |
379 | __unlazy_fpu(tsk); | 572 | if (__thread_has_fpu(tsk)) { |
573 | __save_init_fpu(tsk); | ||
574 | __thread_fpu_end(tsk); | ||
575 | } else | ||
576 | tsk->fpu_counter = 0; | ||
380 | preempt_enable(); | 577 | preempt_enable(); |
381 | } | 578 | } |
382 | 579 | ||
diff --git a/arch/x86/include/asm/kvm_emulate.h b/arch/x86/include/asm/kvm_emulate.h index ab4092e3214e..7b9cfc4878af 100644 --- a/arch/x86/include/asm/kvm_emulate.h +++ b/arch/x86/include/asm/kvm_emulate.h | |||
@@ -190,6 +190,9 @@ struct x86_emulate_ops { | |||
190 | int (*intercept)(struct x86_emulate_ctxt *ctxt, | 190 | int (*intercept)(struct x86_emulate_ctxt *ctxt, |
191 | struct x86_instruction_info *info, | 191 | struct x86_instruction_info *info, |
192 | enum x86_intercept_stage stage); | 192 | enum x86_intercept_stage stage); |
193 | |||
194 | bool (*get_cpuid)(struct x86_emulate_ctxt *ctxt, | ||
195 | u32 *eax, u32 *ebx, u32 *ecx, u32 *edx); | ||
193 | }; | 196 | }; |
194 | 197 | ||
195 | typedef u32 __attribute__((vector_size(16))) sse128_t; | 198 | typedef u32 __attribute__((vector_size(16))) sse128_t; |
@@ -298,6 +301,19 @@ struct x86_emulate_ctxt { | |||
298 | #define X86EMUL_MODE_PROT (X86EMUL_MODE_PROT16|X86EMUL_MODE_PROT32| \ | 301 | #define X86EMUL_MODE_PROT (X86EMUL_MODE_PROT16|X86EMUL_MODE_PROT32| \ |
299 | X86EMUL_MODE_PROT64) | 302 | X86EMUL_MODE_PROT64) |
300 | 303 | ||
304 | /* CPUID vendors */ | ||
305 | #define X86EMUL_CPUID_VENDOR_AuthenticAMD_ebx 0x68747541 | ||
306 | #define X86EMUL_CPUID_VENDOR_AuthenticAMD_ecx 0x444d4163 | ||
307 | #define X86EMUL_CPUID_VENDOR_AuthenticAMD_edx 0x69746e65 | ||
308 | |||
309 | #define X86EMUL_CPUID_VENDOR_AMDisbetterI_ebx 0x69444d41 | ||
310 | #define X86EMUL_CPUID_VENDOR_AMDisbetterI_ecx 0x21726574 | ||
311 | #define X86EMUL_CPUID_VENDOR_AMDisbetterI_edx 0x74656273 | ||
312 | |||
313 | #define X86EMUL_CPUID_VENDOR_GenuineIntel_ebx 0x756e6547 | ||
314 | #define X86EMUL_CPUID_VENDOR_GenuineIntel_ecx 0x6c65746e | ||
315 | #define X86EMUL_CPUID_VENDOR_GenuineIntel_edx 0x49656e69 | ||
316 | |||
301 | enum x86_intercept_stage { | 317 | enum x86_intercept_stage { |
302 | X86_ICTP_NONE = 0, /* Allow zero-init to not match anything */ | 318 | X86_ICTP_NONE = 0, /* Allow zero-init to not match anything */ |
303 | X86_ICPT_PRE_EXCEPT, | 319 | X86_ICPT_PRE_EXCEPT, |
diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h index 096c975e099f..461ce432b1c2 100644 --- a/arch/x86/include/asm/perf_event.h +++ b/arch/x86/include/asm/perf_event.h | |||
@@ -242,4 +242,12 @@ static inline void perf_get_x86_pmu_capability(struct x86_pmu_capability *cap) | |||
242 | static inline void perf_events_lapic_init(void) { } | 242 | static inline void perf_events_lapic_init(void) { } |
243 | #endif | 243 | #endif |
244 | 244 | ||
245 | #if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_CPU_SUP_AMD) | ||
246 | extern void amd_pmu_enable_virt(void); | ||
247 | extern void amd_pmu_disable_virt(void); | ||
248 | #else | ||
249 | static inline void amd_pmu_enable_virt(void) { } | ||
250 | static inline void amd_pmu_disable_virt(void) { } | ||
251 | #endif | ||
252 | |||
245 | #endif /* _ASM_X86_PERF_EVENT_H */ | 253 | #endif /* _ASM_X86_PERF_EVENT_H */ |
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index aa9088c26931..58545c97d071 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h | |||
@@ -374,6 +374,8 @@ union thread_xstate { | |||
374 | }; | 374 | }; |
375 | 375 | ||
376 | struct fpu { | 376 | struct fpu { |
377 | unsigned int last_cpu; | ||
378 | unsigned int has_fpu; | ||
377 | union thread_xstate *state; | 379 | union thread_xstate *state; |
378 | }; | 380 | }; |
379 | 381 | ||
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h index bc817cd8b443..cfd8144d5527 100644 --- a/arch/x86/include/asm/thread_info.h +++ b/arch/x86/include/asm/thread_info.h | |||
@@ -247,8 +247,6 @@ static inline struct thread_info *current_thread_info(void) | |||
247 | * ever touches our thread-synchronous status, so we don't | 247 | * ever touches our thread-synchronous status, so we don't |
248 | * have to worry about atomic accesses. | 248 | * have to worry about atomic accesses. |
249 | */ | 249 | */ |
250 | #define TS_USEDFPU 0x0001 /* FPU was used by this task | ||
251 | this quantum (SMP) */ | ||
252 | #define TS_COMPAT 0x0002 /* 32bit syscall active (64BIT)*/ | 250 | #define TS_COMPAT 0x0002 /* 32bit syscall active (64BIT)*/ |
253 | #define TS_POLLING 0x0004 /* idle task polling need_resched, | 251 | #define TS_POLLING 0x0004 /* idle task polling need_resched, |
254 | skip sending interrupt */ | 252 | skip sending interrupt */ |
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index d43cad74f166..c0f7d68d318f 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c | |||
@@ -1044,6 +1044,9 @@ DEFINE_PER_CPU(char *, irq_stack_ptr) = | |||
1044 | 1044 | ||
1045 | DEFINE_PER_CPU(unsigned int, irq_count) = -1; | 1045 | DEFINE_PER_CPU(unsigned int, irq_count) = -1; |
1046 | 1046 | ||
1047 | DEFINE_PER_CPU(struct task_struct *, fpu_owner_task); | ||
1048 | EXPORT_PER_CPU_SYMBOL(fpu_owner_task); | ||
1049 | |||
1047 | /* | 1050 | /* |
1048 | * Special IST stacks which the CPU switches to when it calls | 1051 | * Special IST stacks which the CPU switches to when it calls |
1049 | * an IST-marked descriptor entry. Up to 7 stacks (hardware | 1052 | * an IST-marked descriptor entry. Up to 7 stacks (hardware |
@@ -1111,6 +1114,8 @@ void debug_stack_reset(void) | |||
1111 | 1114 | ||
1112 | DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task; | 1115 | DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task; |
1113 | EXPORT_PER_CPU_SYMBOL(current_task); | 1116 | EXPORT_PER_CPU_SYMBOL(current_task); |
1117 | DEFINE_PER_CPU(struct task_struct *, fpu_owner_task); | ||
1118 | EXPORT_PER_CPU_SYMBOL(fpu_owner_task); | ||
1114 | 1119 | ||
1115 | #ifdef CONFIG_CC_STACKPROTECTOR | 1120 | #ifdef CONFIG_CC_STACKPROTECTOR |
1116 | DEFINE_PER_CPU_ALIGNED(struct stack_canary, stack_canary); | 1121 | DEFINE_PER_CPU_ALIGNED(struct stack_canary, stack_canary); |
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 6b45e5e7a901..73d08ed98a64 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c | |||
@@ -326,8 +326,7 @@ static void __cpuinit amd_calc_l3_indices(struct amd_northbridge *nb) | |||
326 | l3->indices = (max(max3(sc0, sc1, sc2), sc3) << 10) - 1; | 326 | l3->indices = (max(max3(sc0, sc1, sc2), sc3) << 10) - 1; |
327 | } | 327 | } |
328 | 328 | ||
329 | static void __cpuinit amd_init_l3_cache(struct _cpuid4_info_regs *this_leaf, | 329 | static void __cpuinit amd_init_l3_cache(struct _cpuid4_info_regs *this_leaf, int index) |
330 | int index) | ||
331 | { | 330 | { |
332 | int node; | 331 | int node; |
333 | 332 | ||
@@ -725,14 +724,16 @@ static DEFINE_PER_CPU(struct _cpuid4_info *, ici_cpuid4_info); | |||
725 | #define CPUID4_INFO_IDX(x, y) (&((per_cpu(ici_cpuid4_info, x))[y])) | 724 | #define CPUID4_INFO_IDX(x, y) (&((per_cpu(ici_cpuid4_info, x))[y])) |
726 | 725 | ||
727 | #ifdef CONFIG_SMP | 726 | #ifdef CONFIG_SMP |
728 | static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index) | 727 | |
728 | static int __cpuinit cache_shared_amd_cpu_map_setup(unsigned int cpu, int index) | ||
729 | { | 729 | { |
730 | struct _cpuid4_info *this_leaf, *sibling_leaf; | 730 | struct _cpuid4_info *this_leaf; |
731 | unsigned long num_threads_sharing; | 731 | int ret, i, sibling; |
732 | int index_msb, i, sibling; | ||
733 | struct cpuinfo_x86 *c = &cpu_data(cpu); | 732 | struct cpuinfo_x86 *c = &cpu_data(cpu); |
734 | 733 | ||
735 | if ((index == 3) && (c->x86_vendor == X86_VENDOR_AMD)) { | 734 | ret = 0; |
735 | if (index == 3) { | ||
736 | ret = 1; | ||
736 | for_each_cpu(i, cpu_llc_shared_mask(cpu)) { | 737 | for_each_cpu(i, cpu_llc_shared_mask(cpu)) { |
737 | if (!per_cpu(ici_cpuid4_info, i)) | 738 | if (!per_cpu(ici_cpuid4_info, i)) |
738 | continue; | 739 | continue; |
@@ -743,8 +744,35 @@ static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index) | |||
743 | set_bit(sibling, this_leaf->shared_cpu_map); | 744 | set_bit(sibling, this_leaf->shared_cpu_map); |
744 | } | 745 | } |
745 | } | 746 | } |
746 | return; | 747 | } else if ((c->x86 == 0x15) && ((index == 1) || (index == 2))) { |
748 | ret = 1; | ||
749 | for_each_cpu(i, cpu_sibling_mask(cpu)) { | ||
750 | if (!per_cpu(ici_cpuid4_info, i)) | ||
751 | continue; | ||
752 | this_leaf = CPUID4_INFO_IDX(i, index); | ||
753 | for_each_cpu(sibling, cpu_sibling_mask(cpu)) { | ||
754 | if (!cpu_online(sibling)) | ||
755 | continue; | ||
756 | set_bit(sibling, this_leaf->shared_cpu_map); | ||
757 | } | ||
758 | } | ||
747 | } | 759 | } |
760 | |||
761 | return ret; | ||
762 | } | ||
763 | |||
764 | static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index) | ||
765 | { | ||
766 | struct _cpuid4_info *this_leaf, *sibling_leaf; | ||
767 | unsigned long num_threads_sharing; | ||
768 | int index_msb, i; | ||
769 | struct cpuinfo_x86 *c = &cpu_data(cpu); | ||
770 | |||
771 | if (c->x86_vendor == X86_VENDOR_AMD) { | ||
772 | if (cache_shared_amd_cpu_map_setup(cpu, index)) | ||
773 | return; | ||
774 | } | ||
775 | |||
748 | this_leaf = CPUID4_INFO_IDX(cpu, index); | 776 | this_leaf = CPUID4_INFO_IDX(cpu, index); |
749 | num_threads_sharing = 1 + this_leaf->base.eax.split.num_threads_sharing; | 777 | num_threads_sharing = 1 + this_leaf->base.eax.split.num_threads_sharing; |
750 | 778 | ||
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c index 786e76a86322..e4eeaaf58a47 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_amd.c +++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c | |||
@@ -528,6 +528,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank) | |||
528 | 528 | ||
529 | sprintf(name, "threshold_bank%i", bank); | 529 | sprintf(name, "threshold_bank%i", bank); |
530 | 530 | ||
531 | #ifdef CONFIG_SMP | ||
531 | if (cpu_data(cpu).cpu_core_id && shared_bank[bank]) { /* symlink */ | 532 | if (cpu_data(cpu).cpu_core_id && shared_bank[bank]) { /* symlink */ |
532 | i = cpumask_first(cpu_llc_shared_mask(cpu)); | 533 | i = cpumask_first(cpu_llc_shared_mask(cpu)); |
533 | 534 | ||
@@ -553,6 +554,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank) | |||
553 | 554 | ||
554 | goto out; | 555 | goto out; |
555 | } | 556 | } |
557 | #endif | ||
556 | 558 | ||
557 | b = kzalloc(sizeof(struct threshold_bank), GFP_KERNEL); | 559 | b = kzalloc(sizeof(struct threshold_bank), GFP_KERNEL); |
558 | if (!b) { | 560 | if (!b) { |
diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h index 8944062f46e2..c30c807ddc72 100644 --- a/arch/x86/kernel/cpu/perf_event.h +++ b/arch/x86/kernel/cpu/perf_event.h | |||
@@ -147,7 +147,9 @@ struct cpu_hw_events { | |||
147 | /* | 147 | /* |
148 | * AMD specific bits | 148 | * AMD specific bits |
149 | */ | 149 | */ |
150 | struct amd_nb *amd_nb; | 150 | struct amd_nb *amd_nb; |
151 | /* Inverted mask of bits to clear in the perf_ctr ctrl registers */ | ||
152 | u64 perf_ctr_virt_mask; | ||
151 | 153 | ||
152 | void *kfree_on_online; | 154 | void *kfree_on_online; |
153 | }; | 155 | }; |
@@ -417,9 +419,11 @@ void x86_pmu_disable_all(void); | |||
417 | static inline void __x86_pmu_enable_event(struct hw_perf_event *hwc, | 419 | static inline void __x86_pmu_enable_event(struct hw_perf_event *hwc, |
418 | u64 enable_mask) | 420 | u64 enable_mask) |
419 | { | 421 | { |
422 | u64 disable_mask = __this_cpu_read(cpu_hw_events.perf_ctr_virt_mask); | ||
423 | |||
420 | if (hwc->extra_reg.reg) | 424 | if (hwc->extra_reg.reg) |
421 | wrmsrl(hwc->extra_reg.reg, hwc->extra_reg.config); | 425 | wrmsrl(hwc->extra_reg.reg, hwc->extra_reg.config); |
422 | wrmsrl(hwc->config_base, hwc->config | enable_mask); | 426 | wrmsrl(hwc->config_base, (hwc->config | enable_mask) & ~disable_mask); |
423 | } | 427 | } |
424 | 428 | ||
425 | void x86_pmu_enable_all(int added); | 429 | void x86_pmu_enable_all(int added); |
diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c index 0397b23be8e9..67250a52430b 100644 --- a/arch/x86/kernel/cpu/perf_event_amd.c +++ b/arch/x86/kernel/cpu/perf_event_amd.c | |||
@@ -1,4 +1,5 @@ | |||
1 | #include <linux/perf_event.h> | 1 | #include <linux/perf_event.h> |
2 | #include <linux/export.h> | ||
2 | #include <linux/types.h> | 3 | #include <linux/types.h> |
3 | #include <linux/init.h> | 4 | #include <linux/init.h> |
4 | #include <linux/slab.h> | 5 | #include <linux/slab.h> |
@@ -357,7 +358,9 @@ static void amd_pmu_cpu_starting(int cpu) | |||
357 | struct amd_nb *nb; | 358 | struct amd_nb *nb; |
358 | int i, nb_id; | 359 | int i, nb_id; |
359 | 360 | ||
360 | if (boot_cpu_data.x86_max_cores < 2) | 361 | cpuc->perf_ctr_virt_mask = AMD_PERFMON_EVENTSEL_HOSTONLY; |
362 | |||
363 | if (boot_cpu_data.x86_max_cores < 2 || boot_cpu_data.x86 == 0x15) | ||
361 | return; | 364 | return; |
362 | 365 | ||
363 | nb_id = amd_get_nb_id(cpu); | 366 | nb_id = amd_get_nb_id(cpu); |
@@ -587,9 +590,9 @@ static __initconst const struct x86_pmu amd_pmu_f15h = { | |||
587 | .put_event_constraints = amd_put_event_constraints, | 590 | .put_event_constraints = amd_put_event_constraints, |
588 | 591 | ||
589 | .cpu_prepare = amd_pmu_cpu_prepare, | 592 | .cpu_prepare = amd_pmu_cpu_prepare, |
590 | .cpu_starting = amd_pmu_cpu_starting, | ||
591 | .cpu_dead = amd_pmu_cpu_dead, | 593 | .cpu_dead = amd_pmu_cpu_dead, |
592 | #endif | 594 | #endif |
595 | .cpu_starting = amd_pmu_cpu_starting, | ||
593 | }; | 596 | }; |
594 | 597 | ||
595 | __init int amd_pmu_init(void) | 598 | __init int amd_pmu_init(void) |
@@ -621,3 +624,33 @@ __init int amd_pmu_init(void) | |||
621 | 624 | ||
622 | return 0; | 625 | return 0; |
623 | } | 626 | } |
627 | |||
628 | void amd_pmu_enable_virt(void) | ||
629 | { | ||
630 | struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); | ||
631 | |||
632 | cpuc->perf_ctr_virt_mask = 0; | ||
633 | |||
634 | /* Reload all events */ | ||
635 | x86_pmu_disable_all(); | ||
636 | x86_pmu_enable_all(0); | ||
637 | } | ||
638 | EXPORT_SYMBOL_GPL(amd_pmu_enable_virt); | ||
639 | |||
640 | void amd_pmu_disable_virt(void) | ||
641 | { | ||
642 | struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); | ||
643 | |||
644 | /* | ||
645 | * We only mask out the Host-only bit so that host-only counting works | ||
646 | * when SVM is disabled. If someone sets up a guest-only counter when | ||
647 | * SVM is disabled the Guest-only bits still gets set and the counter | ||
648 | * will not count anything. | ||
649 | */ | ||
650 | cpuc->perf_ctr_virt_mask = AMD_PERFMON_EVENTSEL_HOSTONLY; | ||
651 | |||
652 | /* Reload all events */ | ||
653 | x86_pmu_disable_all(); | ||
654 | x86_pmu_enable_all(0); | ||
655 | } | ||
656 | EXPORT_SYMBOL_GPL(amd_pmu_disable_virt); | ||
diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c index 73da6b64f5b7..d6bd49faa40c 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_ds.c +++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c | |||
@@ -439,7 +439,6 @@ void intel_pmu_pebs_enable(struct perf_event *event) | |||
439 | hwc->config &= ~ARCH_PERFMON_EVENTSEL_INT; | 439 | hwc->config &= ~ARCH_PERFMON_EVENTSEL_INT; |
440 | 440 | ||
441 | cpuc->pebs_enabled |= 1ULL << hwc->idx; | 441 | cpuc->pebs_enabled |= 1ULL << hwc->idx; |
442 | WARN_ON_ONCE(cpuc->enabled); | ||
443 | 442 | ||
444 | if (x86_pmu.intel_cap.pebs_trap && event->attr.precise_ip > 1) | 443 | if (x86_pmu.intel_cap.pebs_trap && event->attr.precise_ip > 1) |
445 | intel_pmu_lbr_enable(event); | 444 | intel_pmu_lbr_enable(event); |
diff --git a/arch/x86/kernel/cpu/perf_event_intel_lbr.c b/arch/x86/kernel/cpu/perf_event_intel_lbr.c index 3fab3de3ce96..47a7e63bfe54 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_lbr.c +++ b/arch/x86/kernel/cpu/perf_event_intel_lbr.c | |||
@@ -72,8 +72,6 @@ void intel_pmu_lbr_enable(struct perf_event *event) | |||
72 | if (!x86_pmu.lbr_nr) | 72 | if (!x86_pmu.lbr_nr) |
73 | return; | 73 | return; |
74 | 74 | ||
75 | WARN_ON_ONCE(cpuc->enabled); | ||
76 | |||
77 | /* | 75 | /* |
78 | * Reset the LBR stack if we changed task context to | 76 | * Reset the LBR stack if we changed task context to |
79 | * avoid data leaks. | 77 | * avoid data leaks. |
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c index 1aae78f775fc..4025fe4f928f 100644 --- a/arch/x86/kernel/dumpstack.c +++ b/arch/x86/kernel/dumpstack.c | |||
@@ -252,7 +252,8 @@ int __kprobes __die(const char *str, struct pt_regs *regs, long err) | |||
252 | unsigned short ss; | 252 | unsigned short ss; |
253 | unsigned long sp; | 253 | unsigned long sp; |
254 | #endif | 254 | #endif |
255 | printk(KERN_EMERG "%s: %04lx [#%d] ", str, err & 0xffff, ++die_counter); | 255 | printk(KERN_DEFAULT |
256 | "%s: %04lx [#%d] ", str, err & 0xffff, ++die_counter); | ||
256 | #ifdef CONFIG_PREEMPT | 257 | #ifdef CONFIG_PREEMPT |
257 | printk("PREEMPT "); | 258 | printk("PREEMPT "); |
258 | #endif | 259 | #endif |
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c index 6d728d9284bd..17107bd6e1f0 100644 --- a/arch/x86/kernel/dumpstack_64.c +++ b/arch/x86/kernel/dumpstack_64.c | |||
@@ -129,7 +129,7 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs, | |||
129 | if (!stack) { | 129 | if (!stack) { |
130 | if (regs) | 130 | if (regs) |
131 | stack = (unsigned long *)regs->sp; | 131 | stack = (unsigned long *)regs->sp; |
132 | else if (task && task != current) | 132 | else if (task != current) |
133 | stack = (unsigned long *)task->thread.sp; | 133 | stack = (unsigned long *)task->thread.sp; |
134 | else | 134 | else |
135 | stack = &dummy; | 135 | stack = &dummy; |
@@ -269,11 +269,11 @@ void show_registers(struct pt_regs *regs) | |||
269 | unsigned char c; | 269 | unsigned char c; |
270 | u8 *ip; | 270 | u8 *ip; |
271 | 271 | ||
272 | printk(KERN_EMERG "Stack:\n"); | 272 | printk(KERN_DEFAULT "Stack:\n"); |
273 | show_stack_log_lvl(NULL, regs, (unsigned long *)sp, | 273 | show_stack_log_lvl(NULL, regs, (unsigned long *)sp, |
274 | 0, KERN_EMERG); | 274 | 0, KERN_DEFAULT); |
275 | 275 | ||
276 | printk(KERN_EMERG "Code: "); | 276 | printk(KERN_DEFAULT "Code: "); |
277 | 277 | ||
278 | ip = (u8 *)regs->ip - code_prologue; | 278 | ip = (u8 *)regs->ip - code_prologue; |
279 | if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) { | 279 | if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) { |
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 3fe8239fd8fb..1333d9851778 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S | |||
@@ -1532,10 +1532,17 @@ ENTRY(nmi) | |||
1532 | pushq_cfi %rdx | 1532 | pushq_cfi %rdx |
1533 | 1533 | ||
1534 | /* | 1534 | /* |
1535 | * If %cs was not the kernel segment, then the NMI triggered in user | ||
1536 | * space, which means it is definitely not nested. | ||
1537 | */ | ||
1538 | cmpl $__KERNEL_CS, 16(%rsp) | ||
1539 | jne first_nmi | ||
1540 | |||
1541 | /* | ||
1535 | * Check the special variable on the stack to see if NMIs are | 1542 | * Check the special variable on the stack to see if NMIs are |
1536 | * executing. | 1543 | * executing. |
1537 | */ | 1544 | */ |
1538 | cmp $1, -8(%rsp) | 1545 | cmpl $1, -8(%rsp) |
1539 | je nested_nmi | 1546 | je nested_nmi |
1540 | 1547 | ||
1541 | /* | 1548 | /* |
diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index ac0417be9131..73465aab28f8 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c | |||
@@ -360,7 +360,6 @@ out: | |||
360 | static enum ucode_state | 360 | static enum ucode_state |
361 | request_microcode_user(int cpu, const void __user *buf, size_t size) | 361 | request_microcode_user(int cpu, const void __user *buf, size_t size) |
362 | { | 362 | { |
363 | pr_info("AMD microcode update via /dev/cpu/microcode not supported\n"); | ||
364 | return UCODE_ERROR; | 363 | return UCODE_ERROR; |
365 | } | 364 | } |
366 | 365 | ||
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index 485204f58cda..c08d1ff12b7c 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c | |||
@@ -214,6 +214,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp, | |||
214 | 214 | ||
215 | task_user_gs(p) = get_user_gs(regs); | 215 | task_user_gs(p) = get_user_gs(regs); |
216 | 216 | ||
217 | p->fpu_counter = 0; | ||
217 | p->thread.io_bitmap_ptr = NULL; | 218 | p->thread.io_bitmap_ptr = NULL; |
218 | tsk = current; | 219 | tsk = current; |
219 | err = -ENOMEM; | 220 | err = -ENOMEM; |
@@ -299,22 +300,11 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) | |||
299 | *next = &next_p->thread; | 300 | *next = &next_p->thread; |
300 | int cpu = smp_processor_id(); | 301 | int cpu = smp_processor_id(); |
301 | struct tss_struct *tss = &per_cpu(init_tss, cpu); | 302 | struct tss_struct *tss = &per_cpu(init_tss, cpu); |
302 | bool preload_fpu; | 303 | fpu_switch_t fpu; |
303 | 304 | ||
304 | /* never put a printk in __switch_to... printk() calls wake_up*() indirectly */ | 305 | /* never put a printk in __switch_to... printk() calls wake_up*() indirectly */ |
305 | 306 | ||
306 | /* | 307 | fpu = switch_fpu_prepare(prev_p, next_p, cpu); |
307 | * If the task has used fpu the last 5 timeslices, just do a full | ||
308 | * restore of the math state immediately to avoid the trap; the | ||
309 | * chances of needing FPU soon are obviously high now | ||
310 | */ | ||
311 | preload_fpu = tsk_used_math(next_p) && next_p->fpu_counter > 5; | ||
312 | |||
313 | __unlazy_fpu(prev_p); | ||
314 | |||
315 | /* we're going to use this soon, after a few expensive things */ | ||
316 | if (preload_fpu) | ||
317 | prefetch(next->fpu.state); | ||
318 | 308 | ||
319 | /* | 309 | /* |
320 | * Reload esp0. | 310 | * Reload esp0. |
@@ -354,11 +344,6 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) | |||
354 | task_thread_info(next_p)->flags & _TIF_WORK_CTXSW_NEXT)) | 344 | task_thread_info(next_p)->flags & _TIF_WORK_CTXSW_NEXT)) |
355 | __switch_to_xtra(prev_p, next_p, tss); | 345 | __switch_to_xtra(prev_p, next_p, tss); |
356 | 346 | ||
357 | /* If we're going to preload the fpu context, make sure clts | ||
358 | is run while we're batching the cpu state updates. */ | ||
359 | if (preload_fpu) | ||
360 | clts(); | ||
361 | |||
362 | /* | 347 | /* |
363 | * Leave lazy mode, flushing any hypercalls made here. | 348 | * Leave lazy mode, flushing any hypercalls made here. |
364 | * This must be done before restoring TLS segments so | 349 | * This must be done before restoring TLS segments so |
@@ -368,15 +353,14 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) | |||
368 | */ | 353 | */ |
369 | arch_end_context_switch(next_p); | 354 | arch_end_context_switch(next_p); |
370 | 355 | ||
371 | if (preload_fpu) | ||
372 | __math_state_restore(); | ||
373 | |||
374 | /* | 356 | /* |
375 | * Restore %gs if needed (which is common) | 357 | * Restore %gs if needed (which is common) |
376 | */ | 358 | */ |
377 | if (prev->gs | next->gs) | 359 | if (prev->gs | next->gs) |
378 | lazy_load_gs(next->gs); | 360 | lazy_load_gs(next->gs); |
379 | 361 | ||
362 | switch_fpu_finish(next_p, fpu); | ||
363 | |||
380 | percpu_write(current_task, next_p); | 364 | percpu_write(current_task, next_p); |
381 | 365 | ||
382 | return prev_p; | 366 | return prev_p; |
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index 9b9fe4a85c87..cfa5c90c01db 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c | |||
@@ -286,6 +286,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp, | |||
286 | 286 | ||
287 | set_tsk_thread_flag(p, TIF_FORK); | 287 | set_tsk_thread_flag(p, TIF_FORK); |
288 | 288 | ||
289 | p->fpu_counter = 0; | ||
289 | p->thread.io_bitmap_ptr = NULL; | 290 | p->thread.io_bitmap_ptr = NULL; |
290 | 291 | ||
291 | savesegment(gs, p->thread.gsindex); | 292 | savesegment(gs, p->thread.gsindex); |
@@ -386,18 +387,9 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) | |||
386 | int cpu = smp_processor_id(); | 387 | int cpu = smp_processor_id(); |
387 | struct tss_struct *tss = &per_cpu(init_tss, cpu); | 388 | struct tss_struct *tss = &per_cpu(init_tss, cpu); |
388 | unsigned fsindex, gsindex; | 389 | unsigned fsindex, gsindex; |
389 | bool preload_fpu; | 390 | fpu_switch_t fpu; |
390 | 391 | ||
391 | /* | 392 | fpu = switch_fpu_prepare(prev_p, next_p, cpu); |
392 | * If the task has used fpu the last 5 timeslices, just do a full | ||
393 | * restore of the math state immediately to avoid the trap; the | ||
394 | * chances of needing FPU soon are obviously high now | ||
395 | */ | ||
396 | preload_fpu = tsk_used_math(next_p) && next_p->fpu_counter > 5; | ||
397 | |||
398 | /* we're going to use this soon, after a few expensive things */ | ||
399 | if (preload_fpu) | ||
400 | prefetch(next->fpu.state); | ||
401 | 393 | ||
402 | /* | 394 | /* |
403 | * Reload esp0, LDT and the page table pointer: | 395 | * Reload esp0, LDT and the page table pointer: |
@@ -427,13 +419,6 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) | |||
427 | 419 | ||
428 | load_TLS(next, cpu); | 420 | load_TLS(next, cpu); |
429 | 421 | ||
430 | /* Must be after DS reload */ | ||
431 | __unlazy_fpu(prev_p); | ||
432 | |||
433 | /* Make sure cpu is ready for new context */ | ||
434 | if (preload_fpu) | ||
435 | clts(); | ||
436 | |||
437 | /* | 422 | /* |
438 | * Leave lazy mode, flushing any hypercalls made here. | 423 | * Leave lazy mode, flushing any hypercalls made here. |
439 | * This must be done before restoring TLS segments so | 424 | * This must be done before restoring TLS segments so |
@@ -474,6 +459,8 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) | |||
474 | wrmsrl(MSR_KERNEL_GS_BASE, next->gs); | 459 | wrmsrl(MSR_KERNEL_GS_BASE, next->gs); |
475 | prev->gsindex = gsindex; | 460 | prev->gsindex = gsindex; |
476 | 461 | ||
462 | switch_fpu_finish(next_p, fpu); | ||
463 | |||
477 | /* | 464 | /* |
478 | * Switch the PDA and FPU contexts. | 465 | * Switch the PDA and FPU contexts. |
479 | */ | 466 | */ |
@@ -492,13 +479,6 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) | |||
492 | task_thread_info(prev_p)->flags & _TIF_WORK_CTXSW_PREV)) | 479 | task_thread_info(prev_p)->flags & _TIF_WORK_CTXSW_PREV)) |
493 | __switch_to_xtra(prev_p, next_p, tss); | 480 | __switch_to_xtra(prev_p, next_p, tss); |
494 | 481 | ||
495 | /* | ||
496 | * Preload the FPU context, now that we've determined that the | ||
497 | * task is likely to be using it. | ||
498 | */ | ||
499 | if (preload_fpu) | ||
500 | __math_state_restore(); | ||
501 | |||
502 | return prev_p; | 482 | return prev_p; |
503 | } | 483 | } |
504 | 484 | ||
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 37a458b521a6..d840e69a853c 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c | |||
@@ -39,6 +39,14 @@ static int reboot_mode; | |||
39 | enum reboot_type reboot_type = BOOT_ACPI; | 39 | enum reboot_type reboot_type = BOOT_ACPI; |
40 | int reboot_force; | 40 | int reboot_force; |
41 | 41 | ||
42 | /* This variable is used privately to keep track of whether or not | ||
43 | * reboot_type is still set to its default value (i.e., reboot= hasn't | ||
44 | * been set on the command line). This is needed so that we can | ||
45 | * suppress DMI scanning for reboot quirks. Without it, it's | ||
46 | * impossible to override a faulty reboot quirk without recompiling. | ||
47 | */ | ||
48 | static int reboot_default = 1; | ||
49 | |||
42 | #if defined(CONFIG_X86_32) && defined(CONFIG_SMP) | 50 | #if defined(CONFIG_X86_32) && defined(CONFIG_SMP) |
43 | static int reboot_cpu = -1; | 51 | static int reboot_cpu = -1; |
44 | #endif | 52 | #endif |
@@ -67,6 +75,12 @@ bool port_cf9_safe = false; | |||
67 | static int __init reboot_setup(char *str) | 75 | static int __init reboot_setup(char *str) |
68 | { | 76 | { |
69 | for (;;) { | 77 | for (;;) { |
78 | /* Having anything passed on the command line via | ||
79 | * reboot= will cause us to disable DMI checking | ||
80 | * below. | ||
81 | */ | ||
82 | reboot_default = 0; | ||
83 | |||
70 | switch (*str) { | 84 | switch (*str) { |
71 | case 'w': | 85 | case 'w': |
72 | reboot_mode = 0x1234; | 86 | reboot_mode = 0x1234; |
@@ -295,14 +309,6 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { | |||
295 | DMI_MATCH(DMI_BOARD_NAME, "P4S800"), | 309 | DMI_MATCH(DMI_BOARD_NAME, "P4S800"), |
296 | }, | 310 | }, |
297 | }, | 311 | }, |
298 | { /* Handle problems with rebooting on VersaLogic Menlow boards */ | ||
299 | .callback = set_bios_reboot, | ||
300 | .ident = "VersaLogic Menlow based board", | ||
301 | .matches = { | ||
302 | DMI_MATCH(DMI_BOARD_VENDOR, "VersaLogic Corporation"), | ||
303 | DMI_MATCH(DMI_BOARD_NAME, "VersaLogic Menlow board"), | ||
304 | }, | ||
305 | }, | ||
306 | { /* Handle reboot issue on Acer Aspire one */ | 312 | { /* Handle reboot issue on Acer Aspire one */ |
307 | .callback = set_kbd_reboot, | 313 | .callback = set_kbd_reboot, |
308 | .ident = "Acer Aspire One A110", | 314 | .ident = "Acer Aspire One A110", |
@@ -316,7 +322,12 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { | |||
316 | 322 | ||
317 | static int __init reboot_init(void) | 323 | static int __init reboot_init(void) |
318 | { | 324 | { |
319 | dmi_check_system(reboot_dmi_table); | 325 | /* Only do the DMI check if reboot_type hasn't been overridden |
326 | * on the command line | ||
327 | */ | ||
328 | if (reboot_default) { | ||
329 | dmi_check_system(reboot_dmi_table); | ||
330 | } | ||
320 | return 0; | 331 | return 0; |
321 | } | 332 | } |
322 | core_initcall(reboot_init); | 333 | core_initcall(reboot_init); |
@@ -465,7 +476,12 @@ static struct dmi_system_id __initdata pci_reboot_dmi_table[] = { | |||
465 | 476 | ||
466 | static int __init pci_reboot_init(void) | 477 | static int __init pci_reboot_init(void) |
467 | { | 478 | { |
468 | dmi_check_system(pci_reboot_dmi_table); | 479 | /* Only do the DMI check if reboot_type hasn't been overridden |
480 | * on the command line | ||
481 | */ | ||
482 | if (reboot_default) { | ||
483 | dmi_check_system(pci_reboot_dmi_table); | ||
484 | } | ||
469 | return 0; | 485 | return 0; |
470 | } | 486 | } |
471 | core_initcall(pci_reboot_init); | 487 | core_initcall(pci_reboot_init); |
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index 482ec3af2067..4bbe04d96744 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c | |||
@@ -571,41 +571,18 @@ asmlinkage void __attribute__((weak)) smp_threshold_interrupt(void) | |||
571 | } | 571 | } |
572 | 572 | ||
573 | /* | 573 | /* |
574 | * __math_state_restore assumes that cr0.TS is already clear and the | ||
575 | * fpu state is all ready for use. Used during context switch. | ||
576 | */ | ||
577 | void __math_state_restore(void) | ||
578 | { | ||
579 | struct thread_info *thread = current_thread_info(); | ||
580 | struct task_struct *tsk = thread->task; | ||
581 | |||
582 | /* | ||
583 | * Paranoid restore. send a SIGSEGV if we fail to restore the state. | ||
584 | */ | ||
585 | if (unlikely(restore_fpu_checking(tsk))) { | ||
586 | stts(); | ||
587 | force_sig(SIGSEGV, tsk); | ||
588 | return; | ||
589 | } | ||
590 | |||
591 | thread->status |= TS_USEDFPU; /* So we fnsave on switch_to() */ | ||
592 | tsk->fpu_counter++; | ||
593 | } | ||
594 | |||
595 | /* | ||
596 | * 'math_state_restore()' saves the current math information in the | 574 | * 'math_state_restore()' saves the current math information in the |
597 | * old math state array, and gets the new ones from the current task | 575 | * old math state array, and gets the new ones from the current task |
598 | * | 576 | * |
599 | * Careful.. There are problems with IBM-designed IRQ13 behaviour. | 577 | * Careful.. There are problems with IBM-designed IRQ13 behaviour. |
600 | * Don't touch unless you *really* know how it works. | 578 | * Don't touch unless you *really* know how it works. |
601 | * | 579 | * |
602 | * Must be called with kernel preemption disabled (in this case, | 580 | * Must be called with kernel preemption disabled (eg with local |
603 | * local interrupts are disabled at the call-site in entry.S). | 581 | * local interrupts as in the case of do_device_not_available). |
604 | */ | 582 | */ |
605 | asmlinkage void math_state_restore(void) | 583 | void math_state_restore(void) |
606 | { | 584 | { |
607 | struct thread_info *thread = current_thread_info(); | 585 | struct task_struct *tsk = current; |
608 | struct task_struct *tsk = thread->task; | ||
609 | 586 | ||
610 | if (!tsk_used_math(tsk)) { | 587 | if (!tsk_used_math(tsk)) { |
611 | local_irq_enable(); | 588 | local_irq_enable(); |
@@ -622,9 +599,17 @@ asmlinkage void math_state_restore(void) | |||
622 | local_irq_disable(); | 599 | local_irq_disable(); |
623 | } | 600 | } |
624 | 601 | ||
625 | clts(); /* Allow maths ops (or we recurse) */ | 602 | __thread_fpu_begin(tsk); |
603 | /* | ||
604 | * Paranoid restore. send a SIGSEGV if we fail to restore the state. | ||
605 | */ | ||
606 | if (unlikely(restore_fpu_checking(tsk))) { | ||
607 | __thread_fpu_end(tsk); | ||
608 | force_sig(SIGSEGV, tsk); | ||
609 | return; | ||
610 | } | ||
626 | 611 | ||
627 | __math_state_restore(); | 612 | tsk->fpu_counter++; |
628 | } | 613 | } |
629 | EXPORT_SYMBOL_GPL(math_state_restore); | 614 | EXPORT_SYMBOL_GPL(math_state_restore); |
630 | 615 | ||
diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c index a3911343976b..711091114119 100644 --- a/arch/x86/kernel/xsave.c +++ b/arch/x86/kernel/xsave.c | |||
@@ -47,7 +47,7 @@ void __sanitize_i387_state(struct task_struct *tsk) | |||
47 | if (!fx) | 47 | if (!fx) |
48 | return; | 48 | return; |
49 | 49 | ||
50 | BUG_ON(task_thread_info(tsk)->status & TS_USEDFPU); | 50 | BUG_ON(__thread_has_fpu(tsk)); |
51 | 51 | ||
52 | xstate_bv = tsk->thread.fpu.state->xsave.xsave_hdr.xstate_bv; | 52 | xstate_bv = tsk->thread.fpu.state->xsave.xsave_hdr.xstate_bv; |
53 | 53 | ||
@@ -168,7 +168,7 @@ int save_i387_xstate(void __user *buf) | |||
168 | if (!used_math()) | 168 | if (!used_math()) |
169 | return 0; | 169 | return 0; |
170 | 170 | ||
171 | if (task_thread_info(tsk)->status & TS_USEDFPU) { | 171 | if (user_has_fpu()) { |
172 | if (use_xsave()) | 172 | if (use_xsave()) |
173 | err = xsave_user(buf); | 173 | err = xsave_user(buf); |
174 | else | 174 | else |
@@ -176,8 +176,7 @@ int save_i387_xstate(void __user *buf) | |||
176 | 176 | ||
177 | if (err) | 177 | if (err) |
178 | return err; | 178 | return err; |
179 | task_thread_info(tsk)->status &= ~TS_USEDFPU; | 179 | user_fpu_end(); |
180 | stts(); | ||
181 | } else { | 180 | } else { |
182 | sanitize_i387_state(tsk); | 181 | sanitize_i387_state(tsk); |
183 | if (__copy_to_user(buf, &tsk->thread.fpu.state->fxsave, | 182 | if (__copy_to_user(buf, &tsk->thread.fpu.state->fxsave, |
@@ -292,10 +291,7 @@ int restore_i387_xstate(void __user *buf) | |||
292 | return err; | 291 | return err; |
293 | } | 292 | } |
294 | 293 | ||
295 | if (!(task_thread_info(current)->status & TS_USEDFPU)) { | 294 | user_fpu_begin(); |
296 | clts(); | ||
297 | task_thread_info(current)->status |= TS_USEDFPU; | ||
298 | } | ||
299 | if (use_xsave()) | 295 | if (use_xsave()) |
300 | err = restore_user_xstate(buf); | 296 | err = restore_user_xstate(buf); |
301 | else | 297 | else |
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index 05a562b85025..0982507b962a 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c | |||
@@ -1891,6 +1891,51 @@ setup_syscalls_segments(struct x86_emulate_ctxt *ctxt, | |||
1891 | ss->p = 1; | 1891 | ss->p = 1; |
1892 | } | 1892 | } |
1893 | 1893 | ||
1894 | static bool em_syscall_is_enabled(struct x86_emulate_ctxt *ctxt) | ||
1895 | { | ||
1896 | struct x86_emulate_ops *ops = ctxt->ops; | ||
1897 | u32 eax, ebx, ecx, edx; | ||
1898 | |||
1899 | /* | ||
1900 | * syscall should always be enabled in longmode - so only become | ||
1901 | * vendor specific (cpuid) if other modes are active... | ||
1902 | */ | ||
1903 | if (ctxt->mode == X86EMUL_MODE_PROT64) | ||
1904 | return true; | ||
1905 | |||
1906 | eax = 0x00000000; | ||
1907 | ecx = 0x00000000; | ||
1908 | if (ops->get_cpuid(ctxt, &eax, &ebx, &ecx, &edx)) { | ||
1909 | /* | ||
1910 | * Intel ("GenuineIntel") | ||
1911 | * remark: Intel CPUs only support "syscall" in 64bit | ||
1912 | * longmode. Also an 64bit guest with a | ||
1913 | * 32bit compat-app running will #UD !! While this | ||
1914 | * behaviour can be fixed (by emulating) into AMD | ||
1915 | * response - CPUs of AMD can't behave like Intel. | ||
1916 | */ | ||
1917 | if (ebx == X86EMUL_CPUID_VENDOR_GenuineIntel_ebx && | ||
1918 | ecx == X86EMUL_CPUID_VENDOR_GenuineIntel_ecx && | ||
1919 | edx == X86EMUL_CPUID_VENDOR_GenuineIntel_edx) | ||
1920 | return false; | ||
1921 | |||
1922 | /* AMD ("AuthenticAMD") */ | ||
1923 | if (ebx == X86EMUL_CPUID_VENDOR_AuthenticAMD_ebx && | ||
1924 | ecx == X86EMUL_CPUID_VENDOR_AuthenticAMD_ecx && | ||
1925 | edx == X86EMUL_CPUID_VENDOR_AuthenticAMD_edx) | ||
1926 | return true; | ||
1927 | |||
1928 | /* AMD ("AMDisbetter!") */ | ||
1929 | if (ebx == X86EMUL_CPUID_VENDOR_AMDisbetterI_ebx && | ||
1930 | ecx == X86EMUL_CPUID_VENDOR_AMDisbetterI_ecx && | ||
1931 | edx == X86EMUL_CPUID_VENDOR_AMDisbetterI_edx) | ||
1932 | return true; | ||
1933 | } | ||
1934 | |||
1935 | /* default: (not Intel, not AMD), apply Intel's stricter rules... */ | ||
1936 | return false; | ||
1937 | } | ||
1938 | |||
1894 | static int em_syscall(struct x86_emulate_ctxt *ctxt) | 1939 | static int em_syscall(struct x86_emulate_ctxt *ctxt) |
1895 | { | 1940 | { |
1896 | struct x86_emulate_ops *ops = ctxt->ops; | 1941 | struct x86_emulate_ops *ops = ctxt->ops; |
@@ -1904,9 +1949,15 @@ static int em_syscall(struct x86_emulate_ctxt *ctxt) | |||
1904 | ctxt->mode == X86EMUL_MODE_VM86) | 1949 | ctxt->mode == X86EMUL_MODE_VM86) |
1905 | return emulate_ud(ctxt); | 1950 | return emulate_ud(ctxt); |
1906 | 1951 | ||
1952 | if (!(em_syscall_is_enabled(ctxt))) | ||
1953 | return emulate_ud(ctxt); | ||
1954 | |||
1907 | ops->get_msr(ctxt, MSR_EFER, &efer); | 1955 | ops->get_msr(ctxt, MSR_EFER, &efer); |
1908 | setup_syscalls_segments(ctxt, &cs, &ss); | 1956 | setup_syscalls_segments(ctxt, &cs, &ss); |
1909 | 1957 | ||
1958 | if (!(efer & EFER_SCE)) | ||
1959 | return emulate_ud(ctxt); | ||
1960 | |||
1910 | ops->get_msr(ctxt, MSR_STAR, &msr_data); | 1961 | ops->get_msr(ctxt, MSR_STAR, &msr_data); |
1911 | msr_data >>= 32; | 1962 | msr_data >>= 32; |
1912 | cs_sel = (u16)(msr_data & 0xfffc); | 1963 | cs_sel = (u16)(msr_data & 0xfffc); |
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 5fa553babe56..e385214711cb 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c | |||
@@ -29,6 +29,7 @@ | |||
29 | #include <linux/ftrace_event.h> | 29 | #include <linux/ftrace_event.h> |
30 | #include <linux/slab.h> | 30 | #include <linux/slab.h> |
31 | 31 | ||
32 | #include <asm/perf_event.h> | ||
32 | #include <asm/tlbflush.h> | 33 | #include <asm/tlbflush.h> |
33 | #include <asm/desc.h> | 34 | #include <asm/desc.h> |
34 | #include <asm/kvm_para.h> | 35 | #include <asm/kvm_para.h> |
@@ -575,6 +576,8 @@ static void svm_hardware_disable(void *garbage) | |||
575 | wrmsrl(MSR_AMD64_TSC_RATIO, TSC_RATIO_DEFAULT); | 576 | wrmsrl(MSR_AMD64_TSC_RATIO, TSC_RATIO_DEFAULT); |
576 | 577 | ||
577 | cpu_svm_disable(); | 578 | cpu_svm_disable(); |
579 | |||
580 | amd_pmu_disable_virt(); | ||
578 | } | 581 | } |
579 | 582 | ||
580 | static int svm_hardware_enable(void *garbage) | 583 | static int svm_hardware_enable(void *garbage) |
@@ -622,6 +625,8 @@ static int svm_hardware_enable(void *garbage) | |||
622 | 625 | ||
623 | svm_init_erratum_383(); | 626 | svm_init_erratum_383(); |
624 | 627 | ||
628 | amd_pmu_enable_virt(); | ||
629 | |||
625 | return 0; | 630 | return 0; |
626 | } | 631 | } |
627 | 632 | ||
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index d29216c462b3..3b4c8d8ad906 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c | |||
@@ -1457,7 +1457,7 @@ static void __vmx_load_host_state(struct vcpu_vmx *vmx) | |||
1457 | #ifdef CONFIG_X86_64 | 1457 | #ifdef CONFIG_X86_64 |
1458 | wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base); | 1458 | wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base); |
1459 | #endif | 1459 | #endif |
1460 | if (current_thread_info()->status & TS_USEDFPU) | 1460 | if (__thread_has_fpu(current)) |
1461 | clts(); | 1461 | clts(); |
1462 | load_gdt(&__get_cpu_var(host_gdt)); | 1462 | load_gdt(&__get_cpu_var(host_gdt)); |
1463 | } | 1463 | } |
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 14d6cadc4ba6..9cbfc0698118 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c | |||
@@ -1495,6 +1495,8 @@ static void record_steal_time(struct kvm_vcpu *vcpu) | |||
1495 | 1495 | ||
1496 | int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data) | 1496 | int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data) |
1497 | { | 1497 | { |
1498 | bool pr = false; | ||
1499 | |||
1498 | switch (msr) { | 1500 | switch (msr) { |
1499 | case MSR_EFER: | 1501 | case MSR_EFER: |
1500 | return set_efer(vcpu, data); | 1502 | return set_efer(vcpu, data); |
@@ -1635,6 +1637,18 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data) | |||
1635 | pr_unimpl(vcpu, "unimplemented perfctr wrmsr: " | 1637 | pr_unimpl(vcpu, "unimplemented perfctr wrmsr: " |
1636 | "0x%x data 0x%llx\n", msr, data); | 1638 | "0x%x data 0x%llx\n", msr, data); |
1637 | break; | 1639 | break; |
1640 | case MSR_P6_PERFCTR0: | ||
1641 | case MSR_P6_PERFCTR1: | ||
1642 | pr = true; | ||
1643 | case MSR_P6_EVNTSEL0: | ||
1644 | case MSR_P6_EVNTSEL1: | ||
1645 | if (kvm_pmu_msr(vcpu, msr)) | ||
1646 | return kvm_pmu_set_msr(vcpu, msr, data); | ||
1647 | |||
1648 | if (pr || data != 0) | ||
1649 | pr_unimpl(vcpu, "disabled perfctr wrmsr: " | ||
1650 | "0x%x data 0x%llx\n", msr, data); | ||
1651 | break; | ||
1638 | case MSR_K7_CLK_CTL: | 1652 | case MSR_K7_CLK_CTL: |
1639 | /* | 1653 | /* |
1640 | * Ignore all writes to this no longer documented MSR. | 1654 | * Ignore all writes to this no longer documented MSR. |
@@ -1835,6 +1849,14 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata) | |||
1835 | case MSR_FAM10H_MMIO_CONF_BASE: | 1849 | case MSR_FAM10H_MMIO_CONF_BASE: |
1836 | data = 0; | 1850 | data = 0; |
1837 | break; | 1851 | break; |
1852 | case MSR_P6_PERFCTR0: | ||
1853 | case MSR_P6_PERFCTR1: | ||
1854 | case MSR_P6_EVNTSEL0: | ||
1855 | case MSR_P6_EVNTSEL1: | ||
1856 | if (kvm_pmu_msr(vcpu, msr)) | ||
1857 | return kvm_pmu_get_msr(vcpu, msr, pdata); | ||
1858 | data = 0; | ||
1859 | break; | ||
1838 | case MSR_IA32_UCODE_REV: | 1860 | case MSR_IA32_UCODE_REV: |
1839 | data = 0x100000000ULL; | 1861 | data = 0x100000000ULL; |
1840 | break; | 1862 | break; |
@@ -4180,6 +4202,28 @@ static int emulator_intercept(struct x86_emulate_ctxt *ctxt, | |||
4180 | return kvm_x86_ops->check_intercept(emul_to_vcpu(ctxt), info, stage); | 4202 | return kvm_x86_ops->check_intercept(emul_to_vcpu(ctxt), info, stage); |
4181 | } | 4203 | } |
4182 | 4204 | ||
4205 | static bool emulator_get_cpuid(struct x86_emulate_ctxt *ctxt, | ||
4206 | u32 *eax, u32 *ebx, u32 *ecx, u32 *edx) | ||
4207 | { | ||
4208 | struct kvm_cpuid_entry2 *cpuid = NULL; | ||
4209 | |||
4210 | if (eax && ecx) | ||
4211 | cpuid = kvm_find_cpuid_entry(emul_to_vcpu(ctxt), | ||
4212 | *eax, *ecx); | ||
4213 | |||
4214 | if (cpuid) { | ||
4215 | *eax = cpuid->eax; | ||
4216 | *ecx = cpuid->ecx; | ||
4217 | if (ebx) | ||
4218 | *ebx = cpuid->ebx; | ||
4219 | if (edx) | ||
4220 | *edx = cpuid->edx; | ||
4221 | return true; | ||
4222 | } | ||
4223 | |||
4224 | return false; | ||
4225 | } | ||
4226 | |||
4183 | static struct x86_emulate_ops emulate_ops = { | 4227 | static struct x86_emulate_ops emulate_ops = { |
4184 | .read_std = kvm_read_guest_virt_system, | 4228 | .read_std = kvm_read_guest_virt_system, |
4185 | .write_std = kvm_write_guest_virt_system, | 4229 | .write_std = kvm_write_guest_virt_system, |
@@ -4211,6 +4255,7 @@ static struct x86_emulate_ops emulate_ops = { | |||
4211 | .get_fpu = emulator_get_fpu, | 4255 | .get_fpu = emulator_get_fpu, |
4212 | .put_fpu = emulator_put_fpu, | 4256 | .put_fpu = emulator_put_fpu, |
4213 | .intercept = emulator_intercept, | 4257 | .intercept = emulator_intercept, |
4258 | .get_cpuid = emulator_get_cpuid, | ||
4214 | }; | 4259 | }; |
4215 | 4260 | ||
4216 | static void cache_all_regs(struct kvm_vcpu *vcpu) | 4261 | static void cache_all_regs(struct kvm_vcpu *vcpu) |
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index 9d74824a708d..f0b4caf85c1a 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c | |||
@@ -673,7 +673,7 @@ no_context(struct pt_regs *regs, unsigned long error_code, | |||
673 | 673 | ||
674 | stackend = end_of_stack(tsk); | 674 | stackend = end_of_stack(tsk); |
675 | if (tsk != &init_task && *stackend != STACK_END_MAGIC) | 675 | if (tsk != &init_task && *stackend != STACK_END_MAGIC) |
676 | printk(KERN_ALERT "Thread overran stack, or stack corrupted\n"); | 676 | printk(KERN_EMERG "Thread overran stack, or stack corrupted\n"); |
677 | 677 | ||
678 | tsk->thread.cr2 = address; | 678 | tsk->thread.cr2 = address; |
679 | tsk->thread.trap_no = 14; | 679 | tsk->thread.trap_no = 14; |
@@ -684,7 +684,7 @@ no_context(struct pt_regs *regs, unsigned long error_code, | |||
684 | sig = 0; | 684 | sig = 0; |
685 | 685 | ||
686 | /* Executive summary in case the body of the oops scrolled away */ | 686 | /* Executive summary in case the body of the oops scrolled away */ |
687 | printk(KERN_EMERG "CR2: %016lx\n", address); | 687 | printk(KERN_DEFAULT "CR2: %016lx\n", address); |
688 | 688 | ||
689 | oops_end(flags, regs, sig); | 689 | oops_end(flags, regs, sig); |
690 | } | 690 | } |
diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c index 492ade8c978e..d99346ea8fdb 100644 --- a/arch/x86/pci/xen.c +++ b/arch/x86/pci/xen.c | |||
@@ -374,7 +374,7 @@ int __init pci_xen_init(void) | |||
374 | 374 | ||
375 | int __init pci_xen_hvm_init(void) | 375 | int __init pci_xen_hvm_init(void) |
376 | { | 376 | { |
377 | if (!xen_feature(XENFEAT_hvm_pirqs)) | 377 | if (!xen_have_vector_callback || !xen_feature(XENFEAT_hvm_pirqs)) |
378 | return 0; | 378 | return 0; |
379 | 379 | ||
380 | #ifdef CONFIG_ACPI | 380 | #ifdef CONFIG_ACPI |
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 12eb07bfb267..4172af8ceeb3 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c | |||
@@ -1141,7 +1141,9 @@ asmlinkage void __init xen_start_kernel(void) | |||
1141 | 1141 | ||
1142 | /* Prevent unwanted bits from being set in PTEs. */ | 1142 | /* Prevent unwanted bits from being set in PTEs. */ |
1143 | __supported_pte_mask &= ~_PAGE_GLOBAL; | 1143 | __supported_pte_mask &= ~_PAGE_GLOBAL; |
1144 | #if 0 | ||
1144 | if (!xen_initial_domain()) | 1145 | if (!xen_initial_domain()) |
1146 | #endif | ||
1145 | __supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD); | 1147 | __supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD); |
1146 | 1148 | ||
1147 | __supported_pte_mask |= _PAGE_IOMAP; | 1149 | __supported_pte_mask |= _PAGE_IOMAP; |
@@ -1204,10 +1206,6 @@ asmlinkage void __init xen_start_kernel(void) | |||
1204 | 1206 | ||
1205 | pgd = (pgd_t *)xen_start_info->pt_base; | 1207 | pgd = (pgd_t *)xen_start_info->pt_base; |
1206 | 1208 | ||
1207 | if (!xen_initial_domain()) | ||
1208 | __supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD); | ||
1209 | |||
1210 | __supported_pte_mask |= _PAGE_IOMAP; | ||
1211 | /* Don't do the full vcpu_info placement stuff until we have a | 1209 | /* Don't do the full vcpu_info placement stuff until we have a |
1212 | possible map and a non-dummy shared_info. */ | 1210 | possible map and a non-dummy shared_info. */ |
1213 | per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0]; | 1211 | per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0]; |
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 58a0e46c404d..95c1cf60c669 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c | |||
@@ -415,13 +415,13 @@ static pteval_t iomap_pte(pteval_t val) | |||
415 | static pteval_t xen_pte_val(pte_t pte) | 415 | static pteval_t xen_pte_val(pte_t pte) |
416 | { | 416 | { |
417 | pteval_t pteval = pte.pte; | 417 | pteval_t pteval = pte.pte; |
418 | 418 | #if 0 | |
419 | /* If this is a WC pte, convert back from Xen WC to Linux WC */ | 419 | /* If this is a WC pte, convert back from Xen WC to Linux WC */ |
420 | if ((pteval & (_PAGE_PAT | _PAGE_PCD | _PAGE_PWT)) == _PAGE_PAT) { | 420 | if ((pteval & (_PAGE_PAT | _PAGE_PCD | _PAGE_PWT)) == _PAGE_PAT) { |
421 | WARN_ON(!pat_enabled); | 421 | WARN_ON(!pat_enabled); |
422 | pteval = (pteval & ~_PAGE_PAT) | _PAGE_PWT; | 422 | pteval = (pteval & ~_PAGE_PAT) | _PAGE_PWT; |
423 | } | 423 | } |
424 | 424 | #endif | |
425 | if (xen_initial_domain() && (pteval & _PAGE_IOMAP)) | 425 | if (xen_initial_domain() && (pteval & _PAGE_IOMAP)) |
426 | return pteval; | 426 | return pteval; |
427 | 427 | ||
@@ -463,7 +463,7 @@ void xen_set_pat(u64 pat) | |||
463 | static pte_t xen_make_pte(pteval_t pte) | 463 | static pte_t xen_make_pte(pteval_t pte) |
464 | { | 464 | { |
465 | phys_addr_t addr = (pte & PTE_PFN_MASK); | 465 | phys_addr_t addr = (pte & PTE_PFN_MASK); |
466 | 466 | #if 0 | |
467 | /* If Linux is trying to set a WC pte, then map to the Xen WC. | 467 | /* If Linux is trying to set a WC pte, then map to the Xen WC. |
468 | * If _PAGE_PAT is set, then it probably means it is really | 468 | * If _PAGE_PAT is set, then it probably means it is really |
469 | * _PAGE_PSE, so avoid fiddling with the PAT mapping and hope | 469 | * _PAGE_PSE, so avoid fiddling with the PAT mapping and hope |
@@ -476,7 +476,7 @@ static pte_t xen_make_pte(pteval_t pte) | |||
476 | if ((pte & (_PAGE_PCD | _PAGE_PWT)) == _PAGE_PWT) | 476 | if ((pte & (_PAGE_PCD | _PAGE_PWT)) == _PAGE_PWT) |
477 | pte = (pte & ~(_PAGE_PCD | _PAGE_PWT)) | _PAGE_PAT; | 477 | pte = (pte & ~(_PAGE_PCD | _PAGE_PWT)) | _PAGE_PAT; |
478 | } | 478 | } |
479 | 479 | #endif | |
480 | /* | 480 | /* |
481 | * Unprivileged domains are allowed to do IOMAPpings for | 481 | * Unprivileged domains are allowed to do IOMAPpings for |
482 | * PCI passthrough, but not map ISA space. The ISA | 482 | * PCI passthrough, but not map ISA space. The ISA |
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index 041d4fe9dfe4..501d4e0244ba 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c | |||
@@ -409,6 +409,13 @@ static void __cpuinit xen_play_dead(void) /* used only with HOTPLUG_CPU */ | |||
409 | play_dead_common(); | 409 | play_dead_common(); |
410 | HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL); | 410 | HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL); |
411 | cpu_bringup(); | 411 | cpu_bringup(); |
412 | /* | ||
413 | * Balance out the preempt calls - as we are running in cpu_idle | ||
414 | * loop which has been called at bootup from cpu_bringup_and_idle. | ||
415 | * The cpucpu_bringup_and_idle called cpu_bringup which made a | ||
416 | * preempt_disable() So this preempt_enable will balance it out. | ||
417 | */ | ||
418 | preempt_enable(); | ||
412 | } | 419 | } |
413 | 420 | ||
414 | #else /* !CONFIG_HOTPLUG_CPU */ | 421 | #else /* !CONFIG_HOTPLUG_CPU */ |
diff --git a/arch/xtensa/include/asm/string.h b/arch/xtensa/include/asm/string.h index 5fb8c27cbef5..405a8c49ff2c 100644 --- a/arch/xtensa/include/asm/string.h +++ b/arch/xtensa/include/asm/string.h | |||
@@ -118,7 +118,4 @@ extern void *memmove(void *__dest, __const__ void *__src, size_t __n); | |||
118 | /* Don't build bcopy at all ... */ | 118 | /* Don't build bcopy at all ... */ |
119 | #define __HAVE_ARCH_BCOPY | 119 | #define __HAVE_ARCH_BCOPY |
120 | 120 | ||
121 | #define __HAVE_ARCH_MEMSCAN | ||
122 | #define memscan memchr | ||
123 | |||
124 | #endif /* _XTENSA_STRING_H */ | 121 | #endif /* _XTENSA_STRING_H */ |