1 files changed, 275 insertions, 0 deletions

diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
new file mode 100644
index 000000000000..2e08b10ad51a
--- /dev/null
+++ b/arch/x86/kernel/irqinit.c
@@ -0,0 +1,275 @@
+#include <linux/linkage.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/kprobes.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/sysdev.h>
+#include <linux/bitops.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+
+#include <asm/atomic.h>
+#include <asm/system.h>
+#include <asm/timer.h>
+#include <asm/hw_irq.h>
+#include <asm/pgtable.h>
+#include <asm/desc.h>
+#include <asm/apic.h>
+#include <asm/setup.h>
+#include <asm/i8259.h>
+#include <asm/traps.h>
+
+/*
+ * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
+ * (these are usually mapped to vectors 0x30-0x3f)
+ */
+
+/*
+ * The IO-APIC gives us many more interrupt sources. Most of these
+ * are unused but an SMP system is supposed to have enough memory ...
+ * sometimes (mostly wrt. hw bugs) we get corrupted vectors all
+ * across the spectrum, so we really want to be prepared to get all
+ * of these. Plus, more powerful systems might have more than 64
+ * IO-APIC registers.
+ *
+ * (these are usually mapped into the 0x30-0xff vector range)
+ */
+
+#ifdef CONFIG_X86_32
+/*
+ * Note that on a 486, we don't want to do a SIGFPE on an irq13
+ * as the irq is unreliable, and exception 16 works correctly
+ * (ie as explained in the intel literature). On a 386, you
+ * can't use exception 16 due to bad IBM design, so we have to
+ * rely on the less exact irq13.
+ *
+ * Careful.. Not only is IRQ13 unreliable, but it is also
+ * leads to races. IBM designers who came up with it should
+ * be shot.
+ */
+
+static irqreturn_t math_error_irq(int cpl, void *dev_id)
+{
+        outb(0, 0xF0);
+        if (ignore_fpu_irq || !boot_cpu_data.hard_math)
+                return IRQ_NONE;
+        math_error((void __user *)get_irq_regs()->ip);
+        return IRQ_HANDLED;
+}
+
+/*
+ * New motherboards sometimes make IRQ 13 be a PCI interrupt,
+ * so allow interrupt sharing.
+ */
+static struct irqaction fpu_irq = {
+        .handler = math_error_irq,
+        .name = "fpu",
+};
+#endif
+
+/*
+ * IRQ2 is cascade interrupt to second interrupt controller
+ */
+static struct irqaction irq2 = {
+        .handler = no_action,
+        .name = "cascade",
+};
+
+DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
+        [0 ... IRQ0_VECTOR - 1] = -1,
+        [IRQ0_VECTOR] = 0,
+        [IRQ1_VECTOR] = 1,
+        [IRQ2_VECTOR] = 2,
+        [IRQ3_VECTOR] = 3,
+        [IRQ4_VECTOR] = 4,
+        [IRQ5_VECTOR] = 5,
+        [IRQ6_VECTOR] = 6,
+        [IRQ7_VECTOR] = 7,
+        [IRQ8_VECTOR] = 8,
+        [IRQ9_VECTOR] = 9,
+        [IRQ10_VECTOR] = 10,
+        [IRQ11_VECTOR] = 11,
+        [IRQ12_VECTOR] = 12,
+        [IRQ13_VECTOR] = 13,
+        [IRQ14_VECTOR] = 14,
+        [IRQ15_VECTOR] = 15,
+        [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1
+};
+
+int vector_used_by_percpu_irq(unsigned int vector)
+{
+        int cpu;
+
+        for_each_online_cpu(cpu) {
+                if (per_cpu(vector_irq, cpu)[vector] != -1)
+                        return 1;
+        }
+
+        return 0;
+}
+
+static void __init init_ISA_irqs(void)
+{
+        int i;
+
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
+        init_bsp_APIC();
+#endif
+        init_8259A(0);
+
+        /*
+         * 16 old-style INTA-cycle interrupts:
+         */
+        for (i = 0; i < NR_IRQS_LEGACY; i++) {
+                struct irq_desc *desc = irq_to_desc(i);
+
+                desc->status = IRQ_DISABLED;
+                desc->action = NULL;
+                desc->depth = 1;
+
+                set_irq_chip_and_handler_name(i, &i8259A_chip,
+                                              handle_level_irq, "XT");
+        }
+}
+
+/* Overridden in paravirt.c */
+void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
+
+static void __init smp_intr_init(void)
+{
+#ifdef CONFIG_SMP
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
+        /*
+         * The reschedule interrupt is a CPU-to-CPU reschedule-helper
+         * IPI, driven by wakeup.
+         */
+        alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
+
+        /* IPIs for invalidation */
+        alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0);
+        alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1);
+        alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2);
+        alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3);
+        alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4);
+        alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5);
+        alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6);
+        alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7);
+
+        /* IPI for generic function call */
+        alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
+
+        /* IPI for generic single function call */
+        alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR,
+                        call_function_single_interrupt);
+
+        /* Low priority IPI to cleanup after moving an irq */
+        set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
+        set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors);
+#endif
+#endif /* CONFIG_SMP */
+}
+
+static void __init apic_intr_init(void)
+{
+        smp_intr_init();
+
+#ifdef CONFIG_X86_64
+        alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
+        alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
+#endif
+
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
+        /* self generated IPI for local APIC timer */
+        alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
+
+        /* generic IPI for platform specific use */
+        alloc_intr_gate(GENERIC_INTERRUPT_VECTOR, generic_interrupt);
+
+        /* IPI vectors for APIC spurious and error interrupts */
+        alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
+        alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
+
+        /* Performance monitoring interrupts: */
+# ifdef CONFIG_PERF_COUNTERS
+        alloc_intr_gate(LOCAL_PERF_VECTOR, perf_counter_interrupt);
+        alloc_intr_gate(LOCAL_PENDING_VECTOR, perf_pending_interrupt);
+# endif
+
+#endif
+
+#ifdef CONFIG_X86_32
+#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_MCE_P4THERMAL)
+        /* thermal monitor LVT interrupt */
+        alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
+#endif
+#endif
+}
+
+/**
+ * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors
+ *
+ * Description:
+ *      Perform any necessary interrupt initialisation prior to setting up
+ *      the "ordinary" interrupt call gates.  For legacy reasons, the ISA
+ *      interrupts should be initialised here if the machine emulates a PC
+ *      in any way.
+ **/
+static void __init x86_quirk_pre_intr_init(void)
+{
+#ifdef CONFIG_X86_32
+        if (x86_quirks->arch_pre_intr_init) {
+                if (x86_quirks->arch_pre_intr_init())
+                        return;
+        }
+#endif
+        init_ISA_irqs();
+}
+
+void __init native_init_IRQ(void)
+{
+        int i;
+
+        /* Execute any quirks before the call gates are initialised: */
+        x86_quirk_pre_intr_init();
+
+        apic_intr_init();
+
+        /*
+         * Cover the whole vector space, no vector can escape
+         * us. (some of these will be overridden and become
+         * 'special' SMP interrupts)
+         */
+        for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) {
+                /* IA32_SYSCALL_VECTOR could be used in trap_init already. */
+                if (!test_bit(i, used_vectors))
+                        set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]);
+        }
+
+        if (!acpi_ioapic)
+                setup_irq(2, &irq2);
+
+#ifdef CONFIG_X86_32
+        /*
+         * Call quirks after call gates are initialised (usually add in
+         * the architecture specific gates):
+         */
+        x86_quirk_intr_init();
+
+        /*
+         * External FPU? Set up irq13 if so, for
+         * original braindamaged IBM FERR coupling.
+         */
+        if (boot_cpu_data.hard_math && !cpu_has_fpu)
+                setup_irq(FPU_IRQ, &fpu_irq);
+
+        irq_ctx_init(smp_processor_id());
+#endif
+}