aboutsummaryrefslogtreecommitdiffstats
path: root/arch/sh/include/asm/hd64465
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/include/asm/hd64465')
-rw-r--r--arch/sh/include/asm/hd64465/gpio.h46
-rw-r--r--arch/sh/include/asm/hd64465/hd64465.h256
-rw-r--r--arch/sh/include/asm/hd64465/io.h44
3 files changed, 0 insertions, 346 deletions
diff --git a/arch/sh/include/asm/hd64465/gpio.h b/arch/sh/include/asm/hd64465/gpio.h
deleted file mode 100644
index a3cdca2713dd..000000000000
--- a/arch/sh/include/asm/hd64465/gpio.h
+++ /dev/null
@@ -1,46 +0,0 @@
1#ifndef _ASM_SH_HD64465_GPIO_
2#define _ASM_SH_HD64465_GPIO_ 1
3/*
4 * $Id: gpio.h,v 1.3 2003/05/04 19:30:14 lethal Exp $
5 *
6 * Hitachi HD64465 companion chip: General Purpose IO pins support.
7 * This layer enables other device drivers to configure GPIO
8 * pins, get and set their values, and register an interrupt
9 * routine for when input pins change in hardware.
10 *
11 * by Greg Banks <gbanks@pocketpenguins.com>
12 * (c) 2000 PocketPenguins Inc.
13 */
14#include <asm/hd64465.h>
15
16/* Macro to construct a portpin number (used in all
17 * subsequent functions) from a port letter and a pin
18 * number, e.g. HD64465_GPIO_PORTPIN('A', 5).
19 */
20#define HD64465_GPIO_PORTPIN(port,pin) (((port)-'A')<<3|(pin))
21
22/* Pin configuration constants for _configure() */
23#define HD64465_GPIO_FUNCTION2 0 /* use the pin's *other* function */
24#define HD64465_GPIO_OUT 1 /* output */
25#define HD64465_GPIO_IN_PULLUP 2 /* input, pull-up MOS on */
26#define HD64465_GPIO_IN 3 /* input */
27
28/* Configure a pin's direction */
29extern void hd64465_gpio_configure(int portpin, int direction);
30
31/* Get, set value */
32extern void hd64465_gpio_set_pin(int portpin, unsigned int value);
33extern unsigned int hd64465_gpio_get_pin(int portpin);
34extern void hd64465_gpio_set_port(int port, unsigned int value);
35extern unsigned int hd64465_gpio_get_port(int port);
36
37/* mode constants for _register_irq() */
38#define HD64465_GPIO_FALLING 0
39#define HD64465_GPIO_RISING 1
40
41/* Interrupt on external value change */
42extern void hd64465_gpio_register_irq(int portpin, int mode,
43 void (*handler)(int portpin, void *dev), void *dev);
44extern void hd64465_gpio_unregister_irq(int portpin);
45
46#endif /* _ASM_SH_HD64465_GPIO_ */
diff --git a/arch/sh/include/asm/hd64465/hd64465.h b/arch/sh/include/asm/hd64465/hd64465.h
deleted file mode 100644
index cfd0e803d2a2..000000000000
--- a/arch/sh/include/asm/hd64465/hd64465.h
+++ /dev/null
@@ -1,256 +0,0 @@
1#ifndef _ASM_SH_HD64465_
2#define _ASM_SH_HD64465_ 1
3/*
4 * $Id: hd64465.h,v 1.3 2003/05/04 19:30:15 lethal Exp $
5 *
6 * Hitachi HD64465 companion chip support
7 *
8 * by Greg Banks <gbanks@pocketpenguins.com>
9 * (c) 2000 PocketPenguins Inc.
10 *
11 * Derived from <asm/hd64461.h> which bore the message:
12 * Copyright (C) 2000 YAEGASHI Takeshi
13 */
14#include <asm/io.h>
15#include <asm/irq.h>
16
17/*
18 * Note that registers are defined here as virtual port numbers,
19 * which have no meaning except to get translated by hd64465_isa_port2addr()
20 * to an address in the range 0xb0000000-0xb3ffffff. Note that
21 * this translation happens to consist of adding the lower 16 bits
22 * of the virtual port number to 0xb0000000. Note also that the manual
23 * shows addresses as absolute physical addresses starting at 0x10000000,
24 * so e.g. the NIRR register is listed as 0x15000 here, 0x10005000 in the
25 * manual, and accessed using address 0xb0005000 - Greg.
26 */
27
28/* System registers */
29#define HD64465_REG_SRR 0x1000c /* System Revision Register */
30#define HD64465_REG_SDID 0x10010 /* System Device ID Reg */
31#define HD64465_SDID 0x8122 /* 64465 device ID */
32
33/* Power Management registers */
34#define HD64465_REG_SMSCR 0x10000 /* System Module Standby Control Reg */
35#define HD64465_SMSCR_PS2ST 0x4000 /* PS/2 Standby */
36#define HD64465_SMSCR_ADCST 0x1000 /* ADC Standby */
37#define HD64465_SMSCR_UARTST 0x0800 /* UART Standby */
38#define HD64465_SMSCR_SCDIST 0x0200 /* Serial Codec Standby */
39#define HD64465_SMSCR_PPST 0x0100 /* Parallel Port Standby */
40#define HD64465_SMSCR_PC0ST 0x0040 /* PCMCIA0 Standby */
41#define HD64465_SMSCR_PC1ST 0x0020 /* PCMCIA1 Standby */
42#define HD64465_SMSCR_AFEST 0x0010 /* AFE Standby */
43#define HD64465_SMSCR_TM0ST 0x0008 /* Timer0 Standby */
44#define HD64465_SMSCR_TM1ST 0x0004 /* Timer1 Standby */
45#define HD64465_SMSCR_IRDAST 0x0002 /* IRDA Standby */
46#define HD64465_SMSCR_KBCST 0x0001 /* Keyboard Controller Standby */
47
48/* Interrupt Controller registers */
49#define HD64465_REG_NIRR 0x15000 /* Interrupt Request Register */
50#define HD64465_REG_NIMR 0x15002 /* Interrupt Mask Register */
51#define HD64465_REG_NITR 0x15004 /* Interrupt Trigger Mode Register */
52
53/* Timer registers */
54#define HD64465_REG_TCVR1 0x16000 /* Timer 1 constant value register */
55#define HD64465_REG_TCVR0 0x16002 /* Timer 0 constant value register */
56#define HD64465_REG_TRVR1 0x16004 /* Timer 1 read value register */
57#define HD64465_REG_TRVR0 0x16006 /* Timer 0 read value register */
58#define HD64465_REG_TCR1 0x16008 /* Timer 1 control register */
59#define HD64465_REG_TCR0 0x1600A /* Timer 0 control register */
60#define HD64465_TCR_EADT 0x10 /* Enable ADTRIG# signal */
61#define HD64465_TCR_ETMO 0x08 /* Enable TMO signal */
62#define HD64465_TCR_PST_MASK 0x06 /* Clock Prescale */
63#define HD64465_TCR_PST_1 0x06 /* 1:1 */
64#define HD64465_TCR_PST_4 0x04 /* 1:4 */
65#define HD64465_TCR_PST_8 0x02 /* 1:8 */
66#define HD64465_TCR_PST_16 0x00 /* 1:16 */
67#define HD64465_TCR_TSTP 0x01 /* Start/Stop timer */
68#define HD64465_REG_TIRR 0x1600C /* Timer interrupt request register */
69#define HD64465_REG_TIDR 0x1600E /* Timer interrupt disable register */
70#define HD64465_REG_PWM1CS 0x16010 /* PWM 1 clock scale register */
71#define HD64465_REG_PWM1LPC 0x16012 /* PWM 1 low pulse width counter register */
72#define HD64465_REG_PWM1HPC 0x16014 /* PWM 1 high pulse width counter register */
73#define HD64465_REG_PWM0CS 0x16018 /* PWM 0 clock scale register */
74#define HD64465_REG_PWM0LPC 0x1601A /* PWM 0 low pulse width counter register */
75#define HD64465_REG_PWM0HPC 0x1601C /* PWM 0 high pulse width counter register */
76
77/* Analog/Digital Converter registers */
78#define HD64465_REG_ADDRA 0x1E000 /* A/D data register A */
79#define HD64465_REG_ADDRB 0x1E002 /* A/D data register B */
80#define HD64465_REG_ADDRC 0x1E004 /* A/D data register C */
81#define HD64465_REG_ADDRD 0x1E006 /* A/D data register D */
82#define HD64465_REG_ADCSR 0x1E008 /* A/D control/status register */
83#define HD64465_ADCSR_ADF 0x80 /* A/D End Flag */
84#define HD64465_ADCSR_ADST 0x40 /* A/D Start Flag */
85#define HD64465_ADCSR_ADIS 0x20 /* A/D Interrupt Status */
86#define HD64465_ADCSR_TRGE 0x10 /* A/D Trigger Enable */
87#define HD64465_ADCSR_ADIE 0x08 /* A/D Interrupt Enable */
88#define HD64465_ADCSR_SCAN 0x04 /* A/D Scan Mode */
89#define HD64465_ADCSR_CH_MASK 0x03 /* A/D Channel */
90#define HD64465_REG_ADCALCR 0x1E00A /* A/D calibration sample control */
91#define HD64465_REG_ADCAL 0x1E00C /* A/D calibration data register */
92
93
94/* General Purpose I/O ports registers */
95#define HD64465_REG_GPACR 0x14000 /* Port A Control Register */
96#define HD64465_REG_GPBCR 0x14002 /* Port B Control Register */
97#define HD64465_REG_GPCCR 0x14004 /* Port C Control Register */
98#define HD64465_REG_GPDCR 0x14006 /* Port D Control Register */
99#define HD64465_REG_GPECR 0x14008 /* Port E Control Register */
100#define HD64465_REG_GPADR 0x14010 /* Port A Data Register */
101#define HD64465_REG_GPBDR 0x14012 /* Port B Data Register */
102#define HD64465_REG_GPCDR 0x14014 /* Port C Data Register */
103#define HD64465_REG_GPDDR 0x14016 /* Port D Data Register */
104#define HD64465_REG_GPEDR 0x14018 /* Port E Data Register */
105#define HD64465_REG_GPAICR 0x14020 /* Port A Interrupt Control Register */
106#define HD64465_REG_GPBICR 0x14022 /* Port B Interrupt Control Register */
107#define HD64465_REG_GPCICR 0x14024 /* Port C Interrupt Control Register */
108#define HD64465_REG_GPDICR 0x14026 /* Port D Interrupt Control Register */
109#define HD64465_REG_GPEICR 0x14028 /* Port E Interrupt Control Register */
110#define HD64465_REG_GPAISR 0x14040 /* Port A Interrupt Status Register */
111#define HD64465_REG_GPBISR 0x14042 /* Port B Interrupt Status Register */
112#define HD64465_REG_GPCISR 0x14044 /* Port C Interrupt Status Register */
113#define HD64465_REG_GPDISR 0x14046 /* Port D Interrupt Status Register */
114#define HD64465_REG_GPEISR 0x14048 /* Port E Interrupt Status Register */
115
116/* PCMCIA bridge interface */
117#define HD64465_REG_PCC0ISR 0x12000 /* socket 0 interface status */
118#define HD64465_PCCISR_PREADY 0x80 /* mem card ready / io card IREQ */
119#define HD64465_PCCISR_PIREQ 0x80
120#define HD64465_PCCISR_PMWP 0x40 /* mem card write-protected */
121#define HD64465_PCCISR_PVS2 0x20 /* voltage select pin 2 */
122#define HD64465_PCCISR_PVS1 0x10 /* voltage select pin 1 */
123#define HD64465_PCCISR_PCD_MASK 0x0c /* card detect */
124#define HD64465_PCCISR_PBVD_MASK 0x03 /* battery voltage */
125#define HD64465_PCCISR_PBVD_BATGOOD 0x03 /* battery good */
126#define HD64465_PCCISR_PBVD_BATWARN 0x01 /* battery low warning */
127#define HD64465_PCCISR_PBVD_BATDEAD1 0x02 /* battery dead */
128#define HD64465_PCCISR_PBVD_BATDEAD2 0x00 /* battery dead */
129#define HD64465_REG_PCC0GCR 0x12002 /* socket 0 general control */
130#define HD64465_PCCGCR_PDRV 0x80 /* output drive */
131#define HD64465_PCCGCR_PCCR 0x40 /* PC card reset */
132#define HD64465_PCCGCR_PCCT 0x20 /* PC card type, 1=IO&mem, 0=mem */
133#define HD64465_PCCGCR_PVCC0 0x10 /* voltage control pin VCC0SEL0 */
134#define HD64465_PCCGCR_PMMOD 0x08 /* memory mode */
135#define HD64465_PCCGCR_PPA25 0x04 /* pin A25 */
136#define HD64465_PCCGCR_PPA24 0x02 /* pin A24 */
137#define HD64465_PCCGCR_PREG 0x01 /* ping PCC0REG# */
138#define HD64465_REG_PCC0CSCR 0x12004 /* socket 0 card status change */
139#define HD64465_PCCCSCR_PSCDI 0x80 /* sw card detect intr */
140#define HD64465_PCCCSCR_PSWSEL 0x40 /* power select */
141#define HD64465_PCCCSCR_PIREQ 0x20 /* IREQ intr req */
142#define HD64465_PCCCSCR_PSC 0x10 /* STSCHG (status change) pin */
143#define HD64465_PCCCSCR_PCDC 0x08 /* CD (card detect) change */
144#define HD64465_PCCCSCR_PRC 0x04 /* ready change */
145#define HD64465_PCCCSCR_PBW 0x02 /* battery warning change */
146#define HD64465_PCCCSCR_PBD 0x01 /* battery dead change */
147#define HD64465_REG_PCC0CSCIER 0x12006 /* socket 0 card status change interrupt enable */
148#define HD64465_PCCCSCIER_PCRE 0x80 /* change reset enable */
149#define HD64465_PCCCSCIER_PIREQE_MASK 0x60 /* IREQ enable */
150#define HD64465_PCCCSCIER_PIREQE_DISABLED 0x00 /* IREQ disabled */
151#define HD64465_PCCCSCIER_PIREQE_LEVEL 0x20 /* IREQ level-triggered */
152#define HD64465_PCCCSCIER_PIREQE_FALLING 0x40 /* IREQ falling-edge-trig */
153#define HD64465_PCCCSCIER_PIREQE_RISING 0x60 /* IREQ rising-edge-trig */
154#define HD64465_PCCCSCIER_PSCE 0x10 /* status change enable */
155#define HD64465_PCCCSCIER_PCDE 0x08 /* card detect change enable */
156#define HD64465_PCCCSCIER_PRE 0x04 /* ready change enable */
157#define HD64465_PCCCSCIER_PBWE 0x02 /* battery warn change enable */
158#define HD64465_PCCCSCIER_PBDE 0x01 /* battery dead change enable*/
159#define HD64465_REG_PCC0SCR 0x12008 /* socket 0 software control */
160#define HD64465_PCCSCR_SHDN 0x10 /* TPS2206 SHutDowN pin */
161#define HD64465_PCCSCR_SWP 0x01 /* write protect */
162#define HD64465_REG_PCCPSR 0x1200A /* serial power switch control */
163#define HD64465_REG_PCC1ISR 0x12010 /* socket 1 interface status */
164#define HD64465_REG_PCC1GCR 0x12012 /* socket 1 general control */
165#define HD64465_REG_PCC1CSCR 0x12014 /* socket 1 card status change */
166#define HD64465_REG_PCC1CSCIER 0x12016 /* socket 1 card status change interrupt enable */
167#define HD64465_REG_PCC1SCR 0x12018 /* socket 1 software control */
168
169
170/* PS/2 Keyboard and mouse controller -- *not* register compatible */
171#define HD64465_REG_KBCSR 0x1dc00 /* Keyboard Control/Status reg */
172#define HD64465_KBCSR_KBCIE 0x8000 /* KBCK Input Enable */
173#define HD64465_KBCSR_KBCOE 0x4000 /* KBCK Output Enable */
174#define HD64465_KBCSR_KBDOE 0x2000 /* KB DATA Output Enable */
175#define HD64465_KBCSR_KBCD 0x1000 /* KBCK Driven */
176#define HD64465_KBCSR_KBDD 0x0800 /* KB DATA Driven */
177#define HD64465_KBCSR_KBCS 0x0400 /* KBCK pin Status */
178#define HD64465_KBCSR_KBDS 0x0200 /* KB DATA pin Status */
179#define HD64465_KBCSR_KBDP 0x0100 /* KB DATA Parity bit */
180#define HD64465_KBCSR_KBD_MASK 0x00ff /* KD DATA shift reg */
181#define HD64465_REG_KBISR 0x1dc04 /* Keyboard Interrupt Status reg */
182#define HD64465_KBISR_KBRDF 0x0001 /* KB Received Data Full */
183#define HD64465_REG_MSCSR 0x1dc10 /* Mouse Control/Status reg */
184#define HD64465_REG_MSISR 0x1dc14 /* Mouse Interrupt Status reg */
185
186
187/*
188 * Logical address at which the HD64465 is mapped. Note that this
189 * should always be in the P2 segment (uncached and untranslated).
190 */
191#ifndef CONFIG_HD64465_IOBASE
192#define CONFIG_HD64465_IOBASE 0xb0000000
193#endif
194/*
195 * The HD64465 multiplexes all its modules' interrupts onto
196 * this single interrupt.
197 */
198#ifndef CONFIG_HD64465_IRQ
199#define CONFIG_HD64465_IRQ 5
200#endif
201
202
203#define _HD64465_IO_MASK 0xf8000000
204#define is_hd64465_addr(addr) \
205 ((addr & _HD64465_IO_MASK) == (CONFIG_HD64465_IOBASE & _HD64465_IO_MASK))
206
207/*
208 * A range of 16 virtual interrupts generated by
209 * demuxing the HD64465 muxed interrupt.
210 */
211#define HD64465_IRQ_BASE OFFCHIP_IRQ_BASE
212#define HD64465_IRQ_NUM 16
213#define HD64465_IRQ_ADC (HD64465_IRQ_BASE+0)
214#define HD64465_IRQ_USB (HD64465_IRQ_BASE+1)
215#define HD64465_IRQ_SCDI (HD64465_IRQ_BASE+2)
216#define HD64465_IRQ_PARALLEL (HD64465_IRQ_BASE+3)
217/* bit 4 is reserved */
218#define HD64465_IRQ_UART (HD64465_IRQ_BASE+5)
219#define HD64465_IRQ_IRDA (HD64465_IRQ_BASE+6)
220#define HD64465_IRQ_PS2MOUSE (HD64465_IRQ_BASE+7)
221#define HD64465_IRQ_KBC (HD64465_IRQ_BASE+8)
222#define HD64465_IRQ_TIMER1 (HD64465_IRQ_BASE+9)
223#define HD64465_IRQ_TIMER0 (HD64465_IRQ_BASE+10)
224#define HD64465_IRQ_GPIO (HD64465_IRQ_BASE+11)
225#define HD64465_IRQ_AFE (HD64465_IRQ_BASE+12)
226#define HD64465_IRQ_PCMCIA1 (HD64465_IRQ_BASE+13)
227#define HD64465_IRQ_PCMCIA0 (HD64465_IRQ_BASE+14)
228#define HD64465_IRQ_PS2KBD (HD64465_IRQ_BASE+15)
229
230/* Constants for PCMCIA mappings */
231#define HD64465_PCC_WINDOW 0x01000000
232
233#define HD64465_PCC0_BASE 0xb8000000 /* area 6 */
234#define HD64465_PCC0_ATTR (HD64465_PCC0_BASE)
235#define HD64465_PCC0_COMM (HD64465_PCC0_BASE+HD64465_PCC_WINDOW)
236#define HD64465_PCC0_IO (HD64465_PCC0_BASE+2*HD64465_PCC_WINDOW)
237
238#define HD64465_PCC1_BASE 0xb4000000 /* area 5 */
239#define HD64465_PCC1_ATTR (HD64465_PCC1_BASE)
240#define HD64465_PCC1_COMM (HD64465_PCC1_BASE+HD64465_PCC_WINDOW)
241#define HD64465_PCC1_IO (HD64465_PCC1_BASE+2*HD64465_PCC_WINDOW)
242
243/*
244 * Base of USB controller interface (as memory)
245 */
246#define HD64465_USB_BASE (CONFIG_HD64465_IOBASE+0xb000)
247#define HD64465_USB_LEN 0x1000
248/*
249 * Base of embedded SRAM, used for USB controller.
250 */
251#define HD64465_SRAM_BASE (CONFIG_HD64465_IOBASE+0x9000)
252#define HD64465_SRAM_LEN 0x1000
253
254
255
256#endif /* _ASM_SH_HD64465_ */
diff --git a/arch/sh/include/asm/hd64465/io.h b/arch/sh/include/asm/hd64465/io.h
deleted file mode 100644
index 139f1472e5bb..000000000000
--- a/arch/sh/include/asm/hd64465/io.h
+++ /dev/null
@@ -1,44 +0,0 @@
1/*
2 * include/asm-sh/hd64465/io.h
3 *
4 * By Greg Banks <gbanks@pocketpenguins.com>
5 * (c) 2000 PocketPenguins Inc.
6 *
7 * Derived from io_hd64461.h, which bore the message:
8 * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
9 *
10 * May be copied or modified under the terms of the GNU General Public
11 * License. See linux/COPYING for more information.
12 *
13 * IO functions for an HD64465 "Windows CE Intelligent Peripheral Controller".
14 */
15
16#ifndef _ASM_SH_IO_HD64465_H
17#define _ASM_SH_IO_HD64465_H
18
19extern unsigned char hd64465_inb(unsigned long port);
20extern unsigned short hd64465_inw(unsigned long port);
21extern unsigned int hd64465_inl(unsigned long port);
22
23extern void hd64465_outb(unsigned char value, unsigned long port);
24extern void hd64465_outw(unsigned short value, unsigned long port);
25extern void hd64465_outl(unsigned int value, unsigned long port);
26
27extern unsigned char hd64465_inb_p(unsigned long port);
28extern void hd64465_outb_p(unsigned char value, unsigned long port);
29
30extern unsigned long hd64465_isa_port2addr(unsigned long offset);
31extern int hd64465_irq_demux(int irq);
32/* Provision for generic secondary demux step -- used by PCMCIA code */
33extern void hd64465_register_irq_demux(int irq,
34 int (*demux)(int irq, void *dev), void *dev);
35extern void hd64465_unregister_irq_demux(int irq);
36/* Set this variable to 1 to see port traffic */
37extern int hd64465_io_debug;
38/* Map a range of ports to a range of kernel virtual memory.
39 */
40extern void hd64465_port_map(unsigned short baseport, unsigned int nports,
41 unsigned long addr, unsigned char shift);
42extern void hd64465_port_unmap(unsigned short baseport, unsigned int nports);
43
44#endif /* _ASM_SH_IO_HD64465_H */
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-24 10:13:07 -0500