aboutsummaryrefslogtreecommitdiffstats
path: root/arch/sh/drivers/pci
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/drivers/pci')
-rw-r--r--arch/sh/drivers/pci/Kconfig18
-rw-r--r--arch/sh/drivers/pci/Makefile28
-rw-r--r--arch/sh/drivers/pci/fixups-cayman.c (renamed from arch/sh/drivers/pci/ops-cayman.c)12
-rw-r--r--arch/sh/drivers/pci/fixups-dreamcast.c9
-rw-r--r--arch/sh/drivers/pci/fixups-landisk.c (renamed from arch/sh/drivers/pci/ops-landisk.c)33
-rw-r--r--arch/sh/drivers/pci/fixups-lboxre2.c41
-rw-r--r--arch/sh/drivers/pci/fixups-r7780rp.c41
-rw-r--r--arch/sh/drivers/pci/fixups-rts7751r2d.c48
-rw-r--r--arch/sh/drivers/pci/fixups-sdk7780.c63
-rw-r--r--arch/sh/drivers/pci/fixups-se7751.c111
-rw-r--r--arch/sh/drivers/pci/fixups-se7780.c60
-rw-r--r--arch/sh/drivers/pci/fixups-sh7785lcr.c46
-rw-r--r--arch/sh/drivers/pci/fixups-snapgear.c38
-rw-r--r--arch/sh/drivers/pci/fixups-titan.c (renamed from arch/sh/drivers/pci/ops-titan.c)39
-rw-r--r--arch/sh/drivers/pci/ops-dreamcast.c107
-rw-r--r--arch/sh/drivers/pci/ops-lboxre2.c63
-rw-r--r--arch/sh/drivers/pci/ops-r7780rp.c68
-rw-r--r--arch/sh/drivers/pci/ops-rts7751r2d.c74
-rw-r--r--arch/sh/drivers/pci/ops-sdk7780.c73
-rw-r--r--arch/sh/drivers/pci/ops-se7780.c96
-rw-r--r--arch/sh/drivers/pci/ops-sh03.c45
-rw-r--r--arch/sh/drivers/pci/ops-sh4.c79
-rw-r--r--arch/sh/drivers/pci/ops-sh5.c25
-rw-r--r--arch/sh/drivers/pci/ops-sh7785lcr.c66
-rw-r--r--arch/sh/drivers/pci/ops-snapgear.c94
-rw-r--r--arch/sh/drivers/pci/pci-auto.c545
-rw-r--r--arch/sh/drivers/pci/pci-dreamcast.c102
-rw-r--r--arch/sh/drivers/pci/pci-sh4.h19
-rw-r--r--arch/sh/drivers/pci/pci-sh5.c51
-rw-r--r--arch/sh/drivers/pci/pci-sh5.h3
-rw-r--r--arch/sh/drivers/pci/pci-sh7751.c216
-rw-r--r--arch/sh/drivers/pci/pci-sh7751.h12
-rw-r--r--arch/sh/drivers/pci/pci-sh7780.c227
-rw-r--r--arch/sh/drivers/pci/pci-sh7780.h16
-rw-r--r--arch/sh/drivers/pci/pci.c279
35 files changed, 867 insertions, 1980 deletions
diff --git a/arch/sh/drivers/pci/Kconfig b/arch/sh/drivers/pci/Kconfig
index 7e816ededed7..e8db585a6638 100644
--- a/arch/sh/drivers/pci/Kconfig
+++ b/arch/sh/drivers/pci/Kconfig
@@ -17,21 +17,3 @@ config SH_PCIDMA_NONCOHERENT
17 code will not have to flush the CPU's caches. If you have a PCI host 17 code will not have to flush the CPU's caches. If you have a PCI host
18 bridge integrated with your SH CPU, refer carefully to the chip specs 18 bridge integrated with your SH CPU, refer carefully to the chip specs
19 to see if you can say 'N' here. Otherwise, leave it as 'Y'. 19 to see if you can say 'N' here. Otherwise, leave it as 'Y'.
20
21# This is also board-specific
22config PCI_AUTO
23 bool
24 depends on PCI
25 default y
26
27config PCI_AUTO_UPDATE_RESOURCES
28 bool
29 depends on PCI_AUTO
30 default y if !SH_DREAMCAST
31 help
32 Selecting this option will cause the PCI auto code to leave your
33 BAR values alone. Otherwise they will be updated automatically. If
34 for some reason, you have a board that simply refuses to work
35 with its resources updated beyond what they are when the device
36 is powered up, set this to N. Everyone else will want this as Y.
37
diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile
index 847e90894d1b..d2ffc477549a 100644
--- a/arch/sh/drivers/pci/Makefile
+++ b/arch/sh/drivers/pci/Makefile
@@ -1,9 +1,7 @@
1# 1#
2# Makefile for the PCI specific kernel interface routines under Linux. 2# Makefile for the PCI specific kernel interface routines under Linux.
3# 3#
4
5obj-y += pci.o 4obj-y += pci.o
6obj-$(CONFIG_PCI_AUTO) += pci-auto.o
7 5
8obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o 6obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o
9obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += pci-sh7751.o ops-sh4.o 7obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += pci-sh7751.o ops-sh4.o
@@ -12,15 +10,17 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o
12obj-$(CONFIG_CPU_SUBTYPE_SH7785) += pci-sh7780.o ops-sh4.o 10obj-$(CONFIG_CPU_SUBTYPE_SH7785) += pci-sh7780.o ops-sh4.o
13obj-$(CONFIG_CPU_SH5) += pci-sh5.o ops-sh5.o 11obj-$(CONFIG_CPU_SH5) += pci-sh5.o ops-sh5.o
14 12
15obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o 13obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \
16obj-$(CONFIG_SH_SECUREEDGE5410) += ops-snapgear.o 14 pci-dreamcast.o
17obj-$(CONFIG_SH_RTS7751R2D) += ops-rts7751r2d.o fixups-rts7751r2d.o 15obj-$(CONFIG_SH_SECUREEDGE5410) += fixups-snapgear.o
18obj-$(CONFIG_SH_SH03) += ops-sh03.o fixups-sh03.o 16obj-$(CONFIG_SH_7751_SOLUTION_ENGINE) += fixups-se7751.o
19obj-$(CONFIG_SH_HIGHLANDER) += ops-r7780rp.o fixups-r7780rp.o 17obj-$(CONFIG_SH_RTS7751R2D) += fixups-rts7751r2d.o
20obj-$(CONFIG_SH_SDK7780) += ops-sdk7780.o fixups-sdk7780.o 18obj-$(CONFIG_SH_SH03) += fixups-sh03.o
21obj-$(CONFIG_SH_TITAN) += ops-titan.o 19obj-$(CONFIG_SH_HIGHLANDER) += fixups-r7780rp.o
22obj-$(CONFIG_SH_LANDISK) += ops-landisk.o 20obj-$(CONFIG_SH_SH7785LCR) += fixups-r7780rp.o
23obj-$(CONFIG_SH_LBOX_RE2) += ops-lboxre2.o fixups-lboxre2.o 21obj-$(CONFIG_SH_SDK7780) += fixups-sdk7780.o
24obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += ops-se7780.o fixups-se7780.o 22obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += fixups-sdk7780.o
25obj-$(CONFIG_SH_CAYMAN) += ops-cayman.o 23obj-$(CONFIG_SH_TITAN) += fixups-titan.o
26obj-$(CONFIG_SH_SH7785LCR) += ops-sh7785lcr.o fixups-sh7785lcr.o 24obj-$(CONFIG_SH_LANDISK) += fixups-landisk.o
25obj-$(CONFIG_SH_LBOX_RE2) += fixups-rts7751r2d.o
26obj-$(CONFIG_SH_CAYMAN) += fixups-cayman.o
diff --git a/arch/sh/drivers/pci/ops-cayman.c b/arch/sh/drivers/pci/fixups-cayman.c
index 38ef76207af6..b68b61d22c6c 100644
--- a/arch/sh/drivers/pci/ops-cayman.c
+++ b/arch/sh/drivers/pci/fixups-cayman.c
@@ -75,15 +75,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin)
75 75
76 return result; 76 return result;
77} 77}
78
79struct pci_channel board_pci_channels[] = {
80 { &sh5_pci_ops, NULL, NULL, 0, 0xff },
81 { NULL, NULL, NULL, 0, 0 },
82};
83EXPORT_SYMBOL(board_pci_channels);
84
85int __init pcibios_init_platform(void)
86{
87 return sh5pci_init(__pa(memory_start),
88 __pa(memory_end) - __pa(memory_start));
89}
diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c
index 2bf85cf091e1..ed7f489936f1 100644
--- a/arch/sh/drivers/pci/fixups-dreamcast.c
+++ b/arch/sh/drivers/pci/fixups-dreamcast.c
@@ -30,7 +30,7 @@
30 30
31static void __init gapspci_fixup_resources(struct pci_dev *dev) 31static void __init gapspci_fixup_resources(struct pci_dev *dev)
32{ 32{
33 struct pci_channel *p = board_pci_channels; 33 struct pci_channel *p = dev->sysdata;
34 34
35 printk(KERN_NOTICE "PCI: Fixing up device %s\n", pci_name(dev)); 35 printk(KERN_NOTICE "PCI: Fixing up device %s\n", pci_name(dev));
36 36
@@ -41,6 +41,13 @@ static void __init gapspci_fixup_resources(struct pci_dev *dev)
41 */ 41 */
42 dev->resource[1].start = p->io_resource->start + 0x100; 42 dev->resource[1].start = p->io_resource->start + 0x100;
43 dev->resource[1].end = dev->resource[1].start + 0x200 - 1; 43 dev->resource[1].end = dev->resource[1].start + 0x200 - 1;
44
45 /*
46 * This is not a normal BAR, prevent any attempts to move
47 * the BAR, as this will result in a bus lock.
48 */
49 dev->resource[1].flags |= IORESOURCE_PCI_FIXED;
50
44 /* 51 /*
45 * Redirect dma memory allocations to special memory window. 52 * Redirect dma memory allocations to special memory window.
46 */ 53 */
diff --git a/arch/sh/drivers/pci/ops-landisk.c b/arch/sh/drivers/pci/fixups-landisk.c
index bff09ecf3419..bb1a6bb5149e 100644
--- a/arch/sh/drivers/pci/ops-landisk.c
+++ b/arch/sh/drivers/pci/fixups-landisk.c
@@ -15,39 +15,6 @@
15#include <linux/pci.h> 15#include <linux/pci.h>
16#include "pci-sh4.h" 16#include "pci-sh4.h"
17 17
18static struct resource sh7751_io_resource = {
19 .name = "SH7751 IO",
20 .start = SH7751_PCI_IO_BASE,
21 .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
22 .flags = IORESOURCE_IO
23};
24
25static struct resource sh7751_mem_resource = {
26 .name = "SH7751 mem",
27 .start = SH7751_PCI_MEMORY_BASE,
28 .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
29 .flags = IORESOURCE_MEM
30};
31
32struct pci_channel board_pci_channels[] = {
33 {&sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0x3ff},
34 {NULL, NULL, NULL, 0, 0},
35};
36
37static struct sh4_pci_address_map sh7751_pci_map = {
38 .window0 = {
39 .base = SH7751_CS3_BASE_ADDR,
40 .size = (64 << 20), /* 64MB */
41 },
42
43 .flags = SH4_PCIC_NO_RESET,
44};
45
46int __init pcibios_init_platform(void)
47{
48 return sh7751_pcic_init(&sh7751_pci_map);
49}
50
51int pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) 18int pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
52{ 19{
53 /* 20 /*
diff --git a/arch/sh/drivers/pci/fixups-lboxre2.c b/arch/sh/drivers/pci/fixups-lboxre2.c
deleted file mode 100644
index 1c1d41255ec0..000000000000
--- a/arch/sh/drivers/pci/fixups-lboxre2.c
+++ /dev/null
@@ -1,41 +0,0 @@
1/*
2 * arch/sh/drivers/pci/fixups-lboxre2.c
3 *
4 * L-BOX RE2 PCI fixups
5 *
6 * Copyright (C) 2007 Nobuhiro Iwamatsu
7 *
8 * This file is subject to the terms and conditions of the GNU General Public
9 * License. See the file "COPYING" in the main directory of this archive
10 * for more details.
11 */
12#include "pci-sh4.h"
13
14#define PCIMCR_MRSET_OFF 0xBFFFFFFF
15#define PCIMCR_RFSH_OFF 0xFFFFFFFB
16
17int pci_fixup_pcic(void)
18{
19 unsigned long bcr1, mcr;
20
21 bcr1 = ctrl_inl(SH7751_BCR1);
22 bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
23 pci_write_reg(bcr1, SH4_PCIBCR1);
24
25 /* Enable all interrupts, so we known what to fix */
26 pci_write_reg(0x0000c3ff, SH4_PCIINTM);
27 pci_write_reg(0x0000380f, SH4_PCIAINTM);
28 pci_write_reg(0xfb900047, SH7751_PCICONF1);
29 pci_write_reg(0xab000001, SH7751_PCICONF4);
30
31 mcr = ctrl_inl(SH7751_MCR);
32 mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
33 pci_write_reg(mcr, SH4_PCIMCR);
34
35 pci_write_reg(0x0c000000, SH7751_PCICONF5);
36 pci_write_reg(0xd0000000, SH7751_PCICONF6);
37 pci_write_reg(0x0c000000, SH4_PCILAR0);
38 pci_write_reg(0x00000000, SH4_PCILAR1);
39
40 return 0;
41}
diff --git a/arch/sh/drivers/pci/fixups-r7780rp.c b/arch/sh/drivers/pci/fixups-r7780rp.c
index 3e321df65d22..15ca65cb667e 100644
--- a/arch/sh/drivers/pci/fixups-r7780rp.c
+++ b/arch/sh/drivers/pci/fixups-r7780rp.c
@@ -11,35 +11,26 @@
11 * for more details. 11 * for more details.
12 */ 12 */
13#include <linux/pci.h> 13#include <linux/pci.h>
14#include <linux/io.h>
14#include "pci-sh4.h" 15#include "pci-sh4.h"
15#include <asm/io.h>
16 16
17int pci_fixup_pcic(void) 17static char irq_tab[] __initdata = {
18{ 18 65, 66, 67, 68,
19 pci_write_reg(0x000043ff, SH4_PCIINTM); 19};
20 pci_write_reg(0x0000380f, SH4_PCIAINTM);
21
22 pci_write_reg(0xfbb00047, SH7780_PCICMD);
23 pci_write_reg(0x00000000, SH7780_PCIIBAR);
24
25 pci_write_reg(0x00011912, SH7780_PCISVID);
26 pci_write_reg(0x08000000, SH7780_PCICSCR0);
27 pci_write_reg(0x0000001b, SH7780_PCICSAR0);
28 pci_write_reg(0xfd000000, SH7780_PCICSCR1);
29 pci_write_reg(0x0000000f, SH7780_PCICSAR1);
30
31 pci_write_reg(0xfd000000, SH7780_PCIMBR0);
32 pci_write_reg(0x00fc0000, SH7780_PCIMBMR0);
33 20
34#ifdef CONFIG_32BIT 21int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
35 pci_write_reg(0xc0000000, SH7780_PCIMBR2); 22{
36 pci_write_reg(0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2); 23 return irq_tab[slot];
37#endif 24}
38 25
39 /* Set IOBR for windows containing area specified in pci.h */ 26int pci_fixup_pcic(struct pci_channel *chan)
40 pci_write_reg((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)), 27{
41 SH7780_PCIIOBR); 28 pci_write_reg(chan, 0x000043ff, SH4_PCIINTM);
42 pci_write_reg(((SH7780_PCI_IO_SIZE-1) & (7<<18)), SH7780_PCIIOBMR); 29 pci_write_reg(chan, 0x00000000, SH7780_PCIIBAR);
30 pci_write_reg(chan, 0x08000000, SH7780_PCICSCR0);
31 pci_write_reg(chan, 0x0000001b, SH7780_PCICSAR0);
32 pci_write_reg(chan, 0xfd000000, SH7780_PCICSCR1);
33 pci_write_reg(chan, 0x0000000f, SH7780_PCICSAR1);
43 34
44 return 0; 35 return 0;
45} 36}
diff --git a/arch/sh/drivers/pci/fixups-rts7751r2d.c b/arch/sh/drivers/pci/fixups-rts7751r2d.c
index 904bce8768d3..052b354236dc 100644
--- a/arch/sh/drivers/pci/fixups-rts7751r2d.c
+++ b/arch/sh/drivers/pci/fixups-rts7751r2d.c
@@ -1,43 +1,67 @@
1/* 1/*
2 * arch/sh/drivers/pci/fixups-rts7751r2d.c 2 * arch/sh/drivers/pci/fixups-rts7751r2d.c
3 * 3 *
4 * RTS7751R2D PCI fixups 4 * RTS7751R2D / LBOXRE2 PCI fixups
5 * 5 *
6 * Copyright (C) 2003 Lineo uSolutions, Inc. 6 * Copyright (C) 2003 Lineo uSolutions, Inc.
7 * Copyright (C) 2004 Paul Mundt 7 * Copyright (C) 2004 Paul Mundt
8 * Copyright (C) 2007 Nobuhiro Iwamatsu
8 * 9 *
9 * This file is subject to the terms and conditions of the GNU General Public 10 * This file is subject to the terms and conditions of the GNU General Public
10 * License. See the file "COPYING" in the main directory of this archive 11 * License. See the file "COPYING" in the main directory of this archive
11 * for more details. 12 * for more details.
12 */ 13 */
14#include <linux/pci.h>
15#include <mach/lboxre2.h>
16#include <mach/r2d.h>
13#include "pci-sh4.h" 17#include "pci-sh4.h"
18#include <asm/machtypes.h>
14 19
15#define PCIMCR_MRSET_OFF 0xBFFFFFFF 20#define PCIMCR_MRSET_OFF 0xBFFFFFFF
16#define PCIMCR_RFSH_OFF 0xFFFFFFFB 21#define PCIMCR_RFSH_OFF 0xFFFFFFFB
17 22
18int pci_fixup_pcic(void) 23static u8 rts7751r2d_irq_tab[] __initdata = {
24 IRQ_PCI_INTA,
25 IRQ_PCI_INTB,
26 IRQ_PCI_INTC,
27 IRQ_PCI_INTD,
28};
29
30static char lboxre2_irq_tab[] __initdata = {
31 IRQ_ETH0, IRQ_ETH1, IRQ_INTA, IRQ_INTD,
32};
33
34int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
35{
36 if (mach_is_lboxre2())
37 return lboxre2_irq_tab[slot];
38 else
39 return rts7751r2d_irq_tab[slot];
40}
41
42int pci_fixup_pcic(struct pci_channel *chan)
19{ 43{
20 unsigned long bcr1, mcr; 44 unsigned long bcr1, mcr;
21 45
22 bcr1 = ctrl_inl(SH7751_BCR1); 46 bcr1 = ctrl_inl(SH7751_BCR1);
23 bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */ 47 bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
24 pci_write_reg(bcr1, SH4_PCIBCR1); 48 pci_write_reg(chan, bcr1, SH4_PCIBCR1);
25 49
26 /* Enable all interrupts, so we known what to fix */ 50 /* Enable all interrupts, so we known what to fix */
27 pci_write_reg(0x0000c3ff, SH4_PCIINTM); 51 pci_write_reg(chan, 0x0000c3ff, SH4_PCIINTM);
28 pci_write_reg(0x0000380f, SH4_PCIAINTM); 52 pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM);
29 53
30 pci_write_reg(0xfb900047, SH7751_PCICONF1); 54 pci_write_reg(chan, 0xfb900047, SH7751_PCICONF1);
31 pci_write_reg(0xab000001, SH7751_PCICONF4); 55 pci_write_reg(chan, 0xab000001, SH7751_PCICONF4);
32 56
33 mcr = ctrl_inl(SH7751_MCR); 57 mcr = ctrl_inl(SH7751_MCR);
34 mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF; 58 mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
35 pci_write_reg(mcr, SH4_PCIMCR); 59 pci_write_reg(chan, mcr, SH4_PCIMCR);
36 60
37 pci_write_reg(0x0c000000, SH7751_PCICONF5); 61 pci_write_reg(chan, 0x0c000000, SH7751_PCICONF5);
38 pci_write_reg(0xd0000000, SH7751_PCICONF6); 62 pci_write_reg(chan, 0xd0000000, SH7751_PCICONF6);
39 pci_write_reg(0x0c000000, SH4_PCILAR0); 63 pci_write_reg(chan, 0x0c000000, SH4_PCILAR0);
40 pci_write_reg(0x00000000, SH4_PCILAR1); 64 pci_write_reg(chan, 0x00000000, SH4_PCILAR1);
41 65
42 return 0; 66 return 0;
43} 67}
diff --git a/arch/sh/drivers/pci/fixups-sdk7780.c b/arch/sh/drivers/pci/fixups-sdk7780.c
index 2f8863099dd1..250b0edd7365 100644
--- a/arch/sh/drivers/pci/fixups-sdk7780.c
+++ b/arch/sh/drivers/pci/fixups-sdk7780.c
@@ -5,55 +5,48 @@
5 * 5 *
6 * Copyright (C) 2003 Lineo uSolutions, Inc. 6 * Copyright (C) 2003 Lineo uSolutions, Inc.
7 * Copyright (C) 2004 - 2006 Paul Mundt 7 * Copyright (C) 2004 - 2006 Paul Mundt
8 * Copyright (C) 2006 Nobuhiro Iwamatsu
8 * 9 *
9 * This file is subject to the terms and conditions of the GNU General Public 10 * This file is subject to the terms and conditions of the GNU General Public
10 * License. See the file "COPYING" in the main directory of this archive 11 * License. See the file "COPYING" in the main directory of this archive
11 * for more details. 12 * for more details.
12 */ 13 */
13#include <linux/pci.h> 14#include <linux/pci.h>
15#include <linux/io.h>
14#include "pci-sh4.h" 16#include "pci-sh4.h"
15#include <asm/io.h>
16 17
17int pci_fixup_pcic(void) 18/* IDSEL [16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31] */
19static char sdk7780_irq_tab[4][16] __initdata = {
20 /* INTA */
21 { 65, 68, 67, 68, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
22 /* INTB */
23 { 66, 65, -1, 65, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
24 /* INTC */
25 { 67, 66, -1, 66, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
26 /* INTD */
27 { 68, 67, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
28};
29
30int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
31{
32 return sdk7780_irq_tab[pin-1][slot];
33}
34int pci_fixup_pcic(struct pci_channel *chan)
18{ 35{
19 ctrl_outl(0x00000001, SH7780_PCI_VCR2);
20
21 /* Enable all interrupts, so we know what to fix */ 36 /* Enable all interrupts, so we know what to fix */
22 pci_write_reg(0x0000C3FF, SH7780_PCIIMR); 37 pci_write_reg(chan, 0x0000C3FF, SH7780_PCIIMR);
23 pci_write_reg(0x0000380F, SH7780_PCIAINTM);
24 38
25 /* Set up standard PCI config registers */ 39 /* Set up standard PCI config registers */
26 pci_write_reg(0xFB00, SH7780_PCISTATUS); 40 pci_write_reg(chan, 0x08000000, SH7780_PCIMBAR0); /* PCI */
27 pci_write_reg(0x0047, SH7780_PCICMD); 41 pci_write_reg(chan, 0x08000000, SH4_PCILAR0); /* SHwy */
28 pci_write_reg(0x00, SH7780_PCIPIF); 42 pci_write_reg(chan, 0x07F00001, SH4_PCILSR0); /* size 128M w/ MBAR */
29 pci_write_reg(0x00, SH7780_PCISUB);
30 pci_write_reg(0x06, SH7780_PCIBCC);
31 pci_write_reg(0x1912, SH7780_PCISVID);
32 pci_write_reg(0x0001, SH7780_PCISID);
33
34 pci_write_reg(0x08000000, SH7780_PCIMBAR0); /* PCI */
35 pci_write_reg(0x08000000, SH7780_PCILAR0); /* SHwy */
36 pci_write_reg(0x07F00001, SH7780_PCILSR); /* size 128M w/ MBAR */
37
38 pci_write_reg(0x00000000, SH7780_PCIMBAR1);
39 pci_write_reg(0x00000000, SH7780_PCILAR1);
40 pci_write_reg(0x00000000, SH7780_PCILSR1);
41
42 pci_write_reg(0xAB000801, SH7780_PCIIBAR);
43
44 /*
45 * Set the MBR so PCI address is one-to-one with window,
46 * meaning all calls go straight through... use ifdef to
47 * catch erroneous assumption.
48 */
49 pci_write_reg(0xFD000000 , SH7780_PCIMBR0);
50 pci_write_reg(0x00FC0000 , SH7780_PCIMBMR0); /* 16M */
51 43
52 /* Set IOBR for window containing area specified in pci.h */ 44 pci_write_reg(chan, 0x00000000, SH7780_PCIMBAR1);
53 pci_write_reg(PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE-1), SH7780_PCIIOBR); 45 pci_write_reg(chan, 0x00000000, SH4_PCILAR1);
54 pci_write_reg((SH7780_PCI_IO_SIZE-1) & (7 << 18), SH7780_PCIIOBMR); 46 pci_write_reg(chan, 0x00000000, SH4_PCILSR1);
55 47
56 pci_write_reg(0xA5000C01, SH7780_PCICR); 48 pci_write_reg(chan, 0xAB000801, SH7780_PCIIBAR);
49 pci_write_reg(chan, 0xA5000C01, SH4_PCICR);
57 50
58 return 0; 51 return 0;
59} 52}
diff --git a/arch/sh/drivers/pci/fixups-se7751.c b/arch/sh/drivers/pci/fixups-se7751.c
new file mode 100644
index 000000000000..475fa9f0fe2c
--- /dev/null
+++ b/arch/sh/drivers/pci/fixups-se7751.c
@@ -0,0 +1,111 @@
1#include <linux/kernel.h>
2#include <linux/types.h>
3#include <linux/init.h>
4#include <linux/delay.h>
5#include <linux/pci.h>
6#include <linux/io.h>
7#include "pci-sh4.h"
8
9int __init pcibios_map_platform_irq(u8 slot, u8 pin)
10{
11 switch (slot) {
12 case 0: return 13;
13 case 1: return 13; /* AMD Ethernet controller */
14 case 2: return -1;
15 case 3: return -1;
16 case 4: return -1;
17 default:
18 printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
19 return -1;
20 }
21}
22
23#define PCIMCR_MRSET_OFF 0xBFFFFFFF
24#define PCIMCR_RFSH_OFF 0xFFFFFFFB
25
26/*
27 * Only long word accesses of the PCIC's internal local registers and the
28 * configuration registers from the CPU is supported.
29 */
30#define PCIC_WRITE(x,v) writel((v), PCI_REG(x))
31#define PCIC_READ(x) readl(PCI_REG(x))
32
33/*
34 * Description: This function sets up and initializes the pcic, sets
35 * up the BARS, maps the DRAM into the address space etc, etc.
36 */
37int pci_fixup_pcic(struct pci_channel *chan)
38{
39 unsigned long bcr1, wcr1, wcr2, wcr3, mcr;
40 unsigned short bcr2;
41
42 /*
43 * Initialize the slave bus controller on the pcic. The values used
44 * here should not be hardcoded, but they should be taken from the bsc
45 * on the processor, to make this function as generic as possible.
46 * (i.e. Another sbc may usr different SDRAM timing settings -- in order
47 * for the pcic to work, its settings need to be exactly the same.)
48 */
49 bcr1 = (*(volatile unsigned long*)(SH7751_BCR1));
50 bcr2 = (*(volatile unsigned short*)(SH7751_BCR2));
51 wcr1 = (*(volatile unsigned long*)(SH7751_WCR1));
52 wcr2 = (*(volatile unsigned long*)(SH7751_WCR2));
53 wcr3 = (*(volatile unsigned long*)(SH7751_WCR3));
54 mcr = (*(volatile unsigned long*)(SH7751_MCR));
55
56 bcr1 = bcr1 | 0x00080000; /* Enable Bit 19, BREQEN */
57 (*(volatile unsigned long*)(SH7751_BCR1)) = bcr1;
58
59 bcr1 = bcr1 | 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
60 PCIC_WRITE(SH7751_PCIBCR1, bcr1); /* PCIC BCR1 */
61 PCIC_WRITE(SH7751_PCIBCR2, bcr2); /* PCIC BCR2 */
62 PCIC_WRITE(SH7751_PCIWCR1, wcr1); /* PCIC WCR1 */
63 PCIC_WRITE(SH7751_PCIWCR2, wcr2); /* PCIC WCR2 */
64 PCIC_WRITE(SH7751_PCIWCR3, wcr3); /* PCIC WCR3 */
65 mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
66 PCIC_WRITE(SH7751_PCIMCR, mcr); /* PCIC MCR */
67
68
69 /* Enable all interrupts, so we know what to fix */
70 PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff);
71 PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f);
72
73 /* Set up standard PCI config registers */
74 PCIC_WRITE(SH7751_PCICONF1, 0xF39000C7); /* Bus Master, Mem & I/O access */
75 PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */
76 PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */
77 PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM) */
78 PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */
79 PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */
80 PCIC_WRITE(SH7751_PCILSR0, 0x03f00000); /* MEM (full 64M exposed) */
81 PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */
82 PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */
83 PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */
84
85 /* Now turn it on... */
86 PCIC_WRITE(SH7751_PCICR, 0xa5000001);
87
88 /*
89 * Set PCIMBR and PCIIOBR here, assuming a single window
90 * (16M MEM, 256K IO) is enough. If a larger space is
91 * needed, the readx/writex and inx/outx functions will
92 * have to do more (e.g. setting registers for each call).
93 */
94
95 /*
96 * Set the MBR so PCI address is one-to-one with window,
97 * meaning all calls go straight through... use BUG_ON to
98 * catch erroneous assumption.
99 */
100 BUG_ON(chan->mem_resource->start != SH7751_PCI_MEMORY_BASE);
101
102 PCIC_WRITE(SH7751_PCIMBR, chan->mem_resource->start);
103
104 /* Set IOBR for window containing area specified in pci.h */
105 PCIC_WRITE(SH7751_PCIIOBR, (chan->io_resource->start & SH7751_PCIIOBR_MASK));
106
107 /* All done, may as well say so... */
108 printk("SH7751 PCI: Finished initialization of the PCI controller\n");
109
110 return 1;
111}
diff --git a/arch/sh/drivers/pci/fixups-se7780.c b/arch/sh/drivers/pci/fixups-se7780.c
deleted file mode 100644
index 880cea1c0d89..000000000000
--- a/arch/sh/drivers/pci/fixups-se7780.c
+++ /dev/null
@@ -1,60 +0,0 @@
1/*
2 * arch/sh/drivers/pci/fixups-se7780.c
3 *
4 * HITACHI UL Solution Engine 7780 PCI fixups
5 *
6 * Copyright (C) 2003 Lineo uSolutions, Inc.
7 * Copyright (C) 2004 - 2006 Paul Mundt
8 * Copyright (C) 2006 Nobuhiro Iwamatsu
9 *
10 * This file is subject to the terms and conditions of the GNU General Public
11 * License. See the file "COPYING" in the main directory of this archive
12 * for more details.
13 */
14#include <linux/pci.h>
15#include "pci-sh4.h"
16#include <asm/io.h>
17
18int pci_fixup_pcic(void)
19{
20 ctrl_outl(0x00000001, SH7780_PCI_VCR2);
21
22 /* Enable all interrupts, so we know what to fix */
23 pci_write_reg(0x0000C3FF, SH7780_PCIIMR);
24 pci_write_reg(0x0000380F, SH7780_PCIAINTM);
25
26 /* Set up standard PCI config registers */
27 ctrl_outw(0xFB00, PCI_REG(SH7780_PCISTATUS));
28 ctrl_outw(0x0047, PCI_REG(SH7780_PCICMD));
29 ctrl_outb( 0x00, PCI_REG(SH7780_PCIPIF));
30 ctrl_outb( 0x00, PCI_REG(SH7780_PCISUB));
31 ctrl_outb( 0x06, PCI_REG(SH7780_PCIBCC));
32 ctrl_outw(0x1912, PCI_REG(SH7780_PCISVID));
33 ctrl_outw(0x0001, PCI_REG(SH7780_PCISID));
34
35 pci_write_reg(0x08000000, SH7780_PCIMBAR0); /* PCI */
36 pci_write_reg(0x08000000, SH7780_PCILAR0); /* SHwy */
37 pci_write_reg(0x07F00001, SH7780_PCILSR); /* size 128M w/ MBAR */
38
39 pci_write_reg(0x00000000, SH7780_PCIMBAR1);
40 pci_write_reg(0x00000000, SH7780_PCILAR1);
41 pci_write_reg(0x00000000, SH7780_PCILSR1);
42
43 pci_write_reg(0xAB000801, SH7780_PCIIBAR);
44
45 /*
46 * Set the MBR so PCI address is one-to-one with window,
47 * meaning all calls go straight through... use ifdef to
48 * catch erroneous assumption.
49 */
50 pci_write_reg(0xFD000000 , SH7780_PCIMBR0);
51 pci_write_reg(0x00FC0000 , SH7780_PCIMBMR0); /* 16M */
52
53 /* Set IOBR for window containing area specified in pci.h */
54 pci_write_reg(PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE-1), SH7780_PCIIOBR);
55 pci_write_reg((SH7780_PCI_IO_SIZE-1) & (7 << 18), SH7780_PCIIOBMR);
56
57 pci_write_reg(0xA5000C01, SH7780_PCICR);
58
59 return 0;
60}
diff --git a/arch/sh/drivers/pci/fixups-sh7785lcr.c b/arch/sh/drivers/pci/fixups-sh7785lcr.c
deleted file mode 100644
index 4949e601387a..000000000000
--- a/arch/sh/drivers/pci/fixups-sh7785lcr.c
+++ /dev/null
@@ -1,46 +0,0 @@
1/*
2 * arch/sh/drivers/pci/fixups-sh7785lcr.c
3 *
4 * R0P7785LC0011RL PCI fixups
5 * Copyright (C) 2008 Yoshihiro Shimoda
6 *
7 * Based on arch/sh/drivers/pci/fixups-r7780rp.c
8 * Copyright (C) 2003 Lineo uSolutions, Inc.
9 * Copyright (C) 2004 - 2006 Paul Mundt
10 *
11 * This file is subject to the terms and conditions of the GNU General Public
12 * License. See the file "COPYING" in the main directory of this archive
13 * for more details.
14 */
15#include <linux/pci.h>
16#include "pci-sh4.h"
17
18int pci_fixup_pcic(void)
19{
20 pci_write_reg(0x000043ff, SH4_PCIINTM);
21 pci_write_reg(0x0000380f, SH4_PCIAINTM);
22
23 pci_write_reg(0xfbb00047, SH7780_PCICMD);
24 pci_write_reg(0x00000000, SH7780_PCIIBAR);
25
26 pci_write_reg(0x00011912, SH7780_PCISVID);
27 pci_write_reg(0x08000000, SH7780_PCICSCR0);
28 pci_write_reg(0x0000001b, SH7780_PCICSAR0);
29 pci_write_reg(0xfd000000, SH7780_PCICSCR1);
30 pci_write_reg(0x0000000f, SH7780_PCICSAR1);
31
32 pci_write_reg(0xfd000000, SH7780_PCIMBR0);
33 pci_write_reg(0x00fc0000, SH7780_PCIMBMR0);
34
35#ifdef CONFIG_32BIT
36 pci_write_reg(0xc0000000, SH7780_PCIMBR2);
37 pci_write_reg(0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
38#endif
39
40 /* Set IOBR for windows containing area specified in pci.h */
41 pci_write_reg((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)),
42 SH7780_PCIIOBR);
43 pci_write_reg(((SH7780_PCI_IO_SIZE - 1) & (7 << 18)), SH7780_PCIIOBMR);
44
45 return 0;
46}
diff --git a/arch/sh/drivers/pci/fixups-snapgear.c b/arch/sh/drivers/pci/fixups-snapgear.c
new file mode 100644
index 000000000000..5a39ecc1adb8
--- /dev/null
+++ b/arch/sh/drivers/pci/fixups-snapgear.c
@@ -0,0 +1,38 @@
1/*
2 * arch/sh/drivers/pci/ops-snapgear.c
3 *
4 * Author: David McCullough <davidm@snapgear.com>
5 *
6 * Ported to new API by Paul Mundt <lethal@linux-sh.org>
7 *
8 * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
9 *
10 * May be copied or modified under the terms of the GNU General Public
11 * License. See linux/COPYING for more information.
12 *
13 * PCI initialization for the SnapGear boards
14 */
15#include <linux/kernel.h>
16#include <linux/types.h>
17#include <linux/init.h>
18#include <linux/pci.h>
19#include "pci-sh4.h"
20
21int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
22{
23 int irq = -1;
24
25 switch (slot) {
26 case 8: /* the PCI bridge */ break;
27 case 11: irq = 8; break; /* USB */
28 case 12: irq = 11; break; /* PCMCIA */
29 case 13: irq = 5; break; /* eth0 */
30 case 14: irq = 8; break; /* eth1 */
31 case 15: irq = 11; break; /* safenet (unused) */
32 }
33
34 printk("PCI: Mapping SnapGear IRQ for slot %d, pin %c to irq %d\n",
35 slot, pin - 1 + 'A', irq);
36
37 return irq;
38}
diff --git a/arch/sh/drivers/pci/ops-titan.c b/arch/sh/drivers/pci/fixups-titan.c
index a8f7801a34af..3a79fa8254a6 100644
--- a/arch/sh/drivers/pci/ops-titan.c
+++ b/arch/sh/drivers/pci/fixups-titan.c
@@ -36,42 +36,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
36 36
37 return irq; 37 return irq;
38} 38}
39
40static struct resource sh7751_io_resource = {
41 .name = "SH7751_IO",
42 .start = SH7751_PCI_IO_BASE,
43 .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
44 .flags = IORESOURCE_IO
45};
46
47static struct resource sh7751_mem_resource = {
48 .name = "SH7751_mem",
49 .start = SH7751_PCI_MEMORY_BASE,
50 .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
51 .flags = IORESOURCE_MEM
52};
53
54struct pci_channel board_pci_channels[] = {
55 { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
56 { NULL, NULL, NULL, 0, 0 },
57};
58EXPORT_SYMBOL(board_pci_channels);
59
60static struct sh4_pci_address_map sh7751_pci_map = {
61 .window0 = {
62 .base = SH7751_CS2_BASE_ADDR,
63 .size = SH7751_MEM_REGION_SIZE*2, /* cs2 and cs3 */
64 },
65
66 .window1 = {
67 .base = SH7751_CS2_BASE_ADDR,
68 .size = SH7751_MEM_REGION_SIZE*2,
69 },
70
71 .flags = SH4_PCIC_NO_RESET,
72};
73
74int __init pcibios_init_platform(void)
75{
76 return sh7751_pcic_init(&sh7751_pci_map);
77}
diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c
index f5d2a2aa6f3f..e83d0d3aabe2 100644
--- a/arch/sh/drivers/pci/ops-dreamcast.c
+++ b/arch/sh/drivers/pci/ops-dreamcast.c
@@ -1,15 +1,9 @@
1/* 1/*
2 * arch/sh/drivers/pci/ops-dreamcast.c
3 *
4 * PCI operations for the Sega Dreamcast 2 * PCI operations for the Sega Dreamcast
5 * 3 *
6 * Copyright (C) 2001, 2002 M. R. Brown 4 * Copyright (C) 2001, 2002 M. R. Brown
7 * Copyright (C) 2002, 2003 Paul Mundt 5 * Copyright (C) 2002, 2003 Paul Mundt
8 * 6 *
9 * This file originally bore the message (with enclosed-$):
10 * Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp
11 * Dreamcast PCI: Supports SEGA Broadband Adaptor only.
12 *
13 * This file is subject to the terms and conditions of the GNU General Public 7 * This file is subject to the terms and conditions of the GNU General Public
14 * License. See the file "COPYING" in the main directory of this archive 8 * License. See the file "COPYING" in the main directory of this archive
15 * for more details. 9 * for more details.
@@ -23,34 +17,10 @@
23#include <linux/irq.h> 17#include <linux/irq.h>
24#include <linux/pci.h> 18#include <linux/pci.h>
25#include <linux/module.h> 19#include <linux/module.h>
26 20#include <linux/io.h>
27#include <asm/io.h> 21#include <linux/irq.h>
28#include <asm/irq.h>
29#include <mach/pci.h> 22#include <mach/pci.h>
30 23
31static struct resource gapspci_io_resource = {
32 .name = "GAPSPCI IO",
33 .start = GAPSPCI_BBA_CONFIG,
34 .end = GAPSPCI_BBA_CONFIG + GAPSPCI_BBA_CONFIG_SIZE - 1,
35 .flags = IORESOURCE_IO,
36};
37
38static struct resource gapspci_mem_resource = {
39 .name = "GAPSPCI mem",
40 .start = GAPSPCI_DMA_BASE,
41 .end = GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1,
42 .flags = IORESOURCE_MEM,
43};
44
45static struct pci_ops gapspci_pci_ops;
46
47struct pci_channel board_pci_channels[] = {
48 { &gapspci_pci_ops, &gapspci_io_resource,
49 &gapspci_mem_resource, 0, 1 },
50 { 0, }
51};
52EXPORT_SYMBOL(board_pci_channels);
53
54/* 24/*
55 * The !gapspci_config_access case really shouldn't happen, ever, unless 25 * The !gapspci_config_access case really shouldn't happen, ever, unless
56 * someone implicitly messes around with the last devfn value.. otherwise we 26 * someone implicitly messes around with the last devfn value.. otherwise we
@@ -85,10 +55,10 @@ static int gapspci_read(struct pci_bus *bus, unsigned int devfn, int where, int
85 return PCIBIOS_DEVICE_NOT_FOUND; 55 return PCIBIOS_DEVICE_NOT_FOUND;
86 56
87 switch (size) { 57 switch (size) {
88 case 1: *val = inb(GAPSPCI_BBA_CONFIG+where); break; 58 case 1: *val = inb(GAPSPCI_BBA_CONFIG+where); break;
89 case 2: *val = inw(GAPSPCI_BBA_CONFIG+where); break; 59 case 2: *val = inw(GAPSPCI_BBA_CONFIG+where); break;
90 case 4: *val = inl(GAPSPCI_BBA_CONFIG+where); break; 60 case 4: *val = inl(GAPSPCI_BBA_CONFIG+where); break;
91 } 61 }
92 62
93 return PCIBIOS_SUCCESSFUL; 63 return PCIBIOS_SUCCESSFUL;
94} 64}
@@ -99,72 +69,15 @@ static int gapspci_write(struct pci_bus *bus, unsigned int devfn, int where, int
99 return PCIBIOS_DEVICE_NOT_FOUND; 69 return PCIBIOS_DEVICE_NOT_FOUND;
100 70
101 switch (size) { 71 switch (size) {
102 case 1: outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break; 72 case 1: outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break;
103 case 2: outw((u16)val, GAPSPCI_BBA_CONFIG+where); break; 73 case 2: outw((u16)val, GAPSPCI_BBA_CONFIG+where); break;
104 case 4: outl((u32)val, GAPSPCI_BBA_CONFIG+where); break; 74 case 4: outl((u32)val, GAPSPCI_BBA_CONFIG+where); break;
105 } 75 }
106 76
107 return PCIBIOS_SUCCESSFUL; 77 return PCIBIOS_SUCCESSFUL;
108} 78}
109 79
110static struct pci_ops gapspci_pci_ops = { 80struct pci_ops gapspci_pci_ops = {
111 .read = gapspci_read, 81 .read = gapspci_read,
112 .write = gapspci_write, 82 .write = gapspci_write,
113}; 83};
114
115/*
116 * gapspci init
117 */
118
119int __init gapspci_init(void)
120{
121 char idbuf[16];
122 int i;
123
124 /*
125 * FIXME: All of this wants documenting to some degree,
126 * even some basic register definitions would be nice.
127 *
128 * I haven't seen anything this ugly since.. maple.
129 */
130
131 for (i=0; i<16; i++)
132 idbuf[i] = inb(GAPSPCI_REGS+i);
133
134 if (strncmp(idbuf, "GAPSPCI_BRIDGE_2", 16))
135 return -ENODEV;
136
137 outl(0x5a14a501, GAPSPCI_REGS+0x18);
138
139 for (i=0; i<1000000; i++)
140 ;
141
142 if (inl(GAPSPCI_REGS+0x18) != 1)
143 return -EINVAL;
144
145 outl(0x01000000, GAPSPCI_REGS+0x20);
146 outl(0x01000000, GAPSPCI_REGS+0x24);
147
148 outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28);
149 outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c);
150
151 outl(1, GAPSPCI_REGS+0x14);
152 outl(1, GAPSPCI_REGS+0x34);
153
154 /* Setting Broadband Adapter */
155 outw(0xf900, GAPSPCI_BBA_CONFIG+0x06);
156 outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30);
157 outb(0x00, GAPSPCI_BBA_CONFIG+0x3c);
158 outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d);
159 outw(0x0006, GAPSPCI_BBA_CONFIG+0x04);
160 outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10);
161 outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14);
162
163 return 0;
164}
165
166/* Haven't done anything here as yet */
167char * __devinit pcibios_setup(char *str)
168{
169 return str;
170}
diff --git a/arch/sh/drivers/pci/ops-lboxre2.c b/arch/sh/drivers/pci/ops-lboxre2.c
deleted file mode 100644
index 86c0b6fb7375..000000000000
--- a/arch/sh/drivers/pci/ops-lboxre2.c
+++ /dev/null
@@ -1,63 +0,0 @@
1/*
2 * linux/arch/sh/drivers/pci/ops-lboxre2.c
3 *
4 * Copyright (C) 2007 Nobuhiro Iwamatsu
5 *
6 * PCI initialization for the NTT COMWARE L-BOX RE2
7 */
8#include <linux/kernel.h>
9#include <linux/types.h>
10#include <linux/init.h>
11#include <linux/pci.h>
12#include <linux/io.h>
13#include <mach/lboxre2.h>
14#include "pci-sh4.h"
15
16static char lboxre2_irq_tab[] __initdata = {
17 IRQ_ETH0, IRQ_ETH1, IRQ_INTA, IRQ_INTD,
18};
19
20int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
21{
22 return lboxre2_irq_tab[slot];
23}
24
25static struct resource sh7751_io_resource = {
26 .name = "SH7751_IO",
27 .start = SH7751_PCI_IO_BASE ,
28 .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
29 .flags = IORESOURCE_IO
30};
31
32static struct resource sh7751_mem_resource = {
33 .name = "SH7751_mem",
34 .start = SH7751_PCI_MEMORY_BASE,
35 .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
36 .flags = IORESOURCE_MEM
37};
38
39extern struct pci_ops sh7751_pci_ops;
40
41struct pci_channel board_pci_channels[] = {
42 { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
43 { NULL, NULL, NULL, 0, 0 },
44};
45
46EXPORT_SYMBOL(board_pci_channels);
47
48static struct sh4_pci_address_map sh7751_pci_map = {
49 .window0 = {
50 .base = SH7751_CS3_BASE_ADDR,
51 .size = 0x04000000,
52 },
53 .window1 = {
54 .base = 0x00000000, /* Unused */
55 .size = 0x00000000, /* Unused */
56 },
57 .flags = SH4_PCIC_NO_RESET,
58};
59
60int __init pcibios_init_platform(void)
61{
62 return sh7751_pcic_init(&sh7751_pci_map);
63}
diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c
deleted file mode 100644
index 8555238e63eb..000000000000
--- a/arch/sh/drivers/pci/ops-r7780rp.c
+++ /dev/null
@@ -1,68 +0,0 @@
1/*
2 * Author: Ian DaSilva (idasilva@mvista.com)
3 *
4 * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
5 *
6 * May be copied or modified under the terms of the GNU General Public
7 * License. See linux/COPYING for more information.
8 *
9 * PCI initialization for the Renesas SH7780 Highlander R7780RP-1 board
10 */
11#include <linux/kernel.h>
12#include <linux/types.h>
13#include <linux/init.h>
14#include <linux/delay.h>
15#include <linux/pci.h>
16#include <mach/highlander.h>
17#include <asm/io.h>
18#include "pci-sh4.h"
19
20static char irq_tab[] __initdata = {
21 65, 66, 67, 68,
22};
23
24int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
25{
26 return irq_tab[slot];
27}
28
29static struct resource sh7780_io_resource = {
30 .name = "SH7780_IO",
31 .start = SH7780_PCI_IO_BASE,
32 .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
33 .flags = IORESOURCE_IO
34};
35
36static struct resource sh7780_mem_resource = {
37 .name = "SH7780_mem",
38 .start = SH7780_PCI_MEMORY_BASE,
39 .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
40 .flags = IORESOURCE_MEM
41};
42
43extern struct pci_ops sh7780_pci_ops;
44
45struct pci_channel board_pci_channels[] = {
46 { &sh4_pci_ops, &sh7780_io_resource, &sh7780_mem_resource, 0, 0xff },
47 { NULL, NULL, NULL, 0, 0 },
48};
49EXPORT_SYMBOL(board_pci_channels);
50
51static struct sh4_pci_address_map sh7780_pci_map = {
52 .window0 = {
53 .base = SH7780_CS2_BASE_ADDR,
54 .size = 0x04000000,
55 },
56
57 .window1 = {
58 .base = SH7780_CS3_BASE_ADDR,
59 .size = 0x04000000,
60 },
61
62 .flags = SH4_PCIC_NO_RESET,
63};
64
65int __init pcibios_init_platform(void)
66{
67 return sh7780_pcic_init(&sh7780_pci_map);
68}
diff --git a/arch/sh/drivers/pci/ops-rts7751r2d.c b/arch/sh/drivers/pci/ops-rts7751r2d.c
deleted file mode 100644
index d6ca74b25d5f..000000000000
--- a/arch/sh/drivers/pci/ops-rts7751r2d.c
+++ /dev/null
@@ -1,74 +0,0 @@
1/*
2 * linux/arch/sh/drivers/pci/ops-rts7751r2d.c
3 *
4 * Author: Ian DaSilva (idasilva@mvista.com)
5 *
6 * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
7 *
8 * May be copied or modified under the terms of the GNU General Public
9 * License. See linux/COPYING for more information.
10 *
11 * PCI initialization for the Renesas SH7751R RTS7751R2D board
12 */
13#include <linux/kernel.h>
14#include <linux/types.h>
15#include <linux/init.h>
16#include <linux/pci.h>
17#include <linux/io.h>
18#include <mach/r2d.h>
19#include "pci-sh4.h"
20
21static u8 rts7751r2d_irq_tab[] __initdata = {
22 IRQ_PCI_INTA,
23 IRQ_PCI_INTB,
24 IRQ_PCI_INTC,
25 IRQ_PCI_INTD,
26};
27
28int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
29{
30 return rts7751r2d_irq_tab[slot];
31}
32
33static struct resource sh7751_io_resource = {
34 .name = "SH7751_IO",
35 .start = 0x4000,
36 .end = SH7751_PCI_IO_SIZE - 1,
37 .flags = IORESOURCE_IO
38};
39
40static struct resource sh7751_mem_resource = {
41 .name = "SH7751_mem",
42 .start = SH7751_PCI_MEMORY_BASE,
43 .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
44 .flags = IORESOURCE_MEM
45};
46
47extern struct pci_ops sh7751_pci_ops;
48
49struct pci_channel board_pci_channels[] = {
50 { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
51 { NULL, NULL, NULL, 0, 0 },
52};
53EXPORT_SYMBOL(board_pci_channels);
54
55static struct sh4_pci_address_map sh7751_pci_map = {
56 .window0 = {
57 .base = SH7751_CS3_BASE_ADDR,
58 .size = 0x04000000,
59 },
60
61 .window1 = {
62 .base = 0x00000000, /* Unused */
63 .size = 0x00000000, /* Unused */
64 },
65
66 .flags = SH4_PCIC_NO_RESET,
67};
68
69int __init pcibios_init_platform(void)
70{
71 __set_io_port_base(SH7751_PCI_IO_BASE);
72 return sh7751_pcic_init(&sh7751_pci_map);
73}
74
diff --git a/arch/sh/drivers/pci/ops-sdk7780.c b/arch/sh/drivers/pci/ops-sdk7780.c
deleted file mode 100644
index 4dcc64184b23..000000000000
--- a/arch/sh/drivers/pci/ops-sdk7780.c
+++ /dev/null
@@ -1,73 +0,0 @@
1/*
2 * linux/arch/sh/drivers/pci/ops-sdk7780.c
3 *
4 * Copyright (C) 2006 Nobuhiro Iwamatsu
5 *
6 * PCI initialization for the SDK7780SE03
7 *
8 * May be copied or modified under the terms of the GNU General Public
9 * License. See linux/COPYING for more information.
10 */
11#include <linux/kernel.h>
12#include <linux/types.h>
13#include <linux/init.h>
14#include <linux/delay.h>
15#include <linux/pci.h>
16#include <mach/sdk7780.h>
17#include <asm/io.h>
18#include "pci-sh4.h"
19
20/* IDSEL [16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31] */
21static char sdk7780_irq_tab[4][16] __initdata = {
22 /* INTA */
23 { 65, 68, 67, 68, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
24 /* INTB */
25 { 66, 65, -1, 65, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
26 /* INTC */
27 { 67, 66, -1, 66, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
28 /* INTD */
29 { 68, 67, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
30};
31
32int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
33{
34 return sdk7780_irq_tab[pin-1][slot];
35}
36
37static struct resource sdk7780_io_resource = {
38 .name = "SH7780_IO",
39 .start = SH7780_PCI_IO_BASE,
40 .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
41 .flags = IORESOURCE_IO
42};
43
44static struct resource sdk7780_mem_resource = {
45 .name = "SH7780_mem",
46 .start = SH7780_PCI_MEMORY_BASE,
47 .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
48 .flags = IORESOURCE_MEM
49};
50
51struct pci_channel board_pci_channels[] = {
52 { &sh4_pci_ops, &sdk7780_io_resource, &sdk7780_mem_resource, 0, 0xff },
53 { NULL, NULL, NULL, 0, 0 },
54};
55EXPORT_SYMBOL(board_pci_channels);
56
57static struct sh4_pci_address_map sdk7780_pci_map = {
58 .window0 = {
59 .base = SH7780_CS2_BASE_ADDR,
60 .size = 0x04000000,
61 },
62 .window1 = {
63 .base = SH7780_CS3_BASE_ADDR,
64 .size = 0x04000000,
65 },
66 .flags = SH4_PCIC_NO_RESET,
67};
68
69int __init pcibios_init_platform(void)
70{
71 printk(KERN_INFO "SH7780 PCI: Finished initializing PCI controller\n");
72 return sh7780_pcic_init(&sdk7780_pci_map);
73}
diff --git a/arch/sh/drivers/pci/ops-se7780.c b/arch/sh/drivers/pci/ops-se7780.c
deleted file mode 100644
index 3145c62484d6..000000000000
--- a/arch/sh/drivers/pci/ops-se7780.c
+++ /dev/null
@@ -1,96 +0,0 @@
1/*
2 * linux/arch/sh/drivers/pci/ops-se7780.c
3 *
4 * Copyright (C) 2006 Nobuhiro Iwamatsu
5 *
6 * PCI initialization for the Hitachi UL Solution Engine 7780SE03
7 *
8 * May be copied or modified under the terms of the GNU General Public
9 * License. See linux/COPYING for more information.
10 */
11#include <linux/kernel.h>
12#include <linux/types.h>
13#include <linux/init.h>
14#include <linux/delay.h>
15#include <linux/pci.h>
16#include <mach-se/mach/se7780.h>
17#include <asm/io.h>
18#include "pci-sh4.h"
19
20/*
21 * IDSEL = AD16 PCI slot
22 * IDSEL = AD17 PCI slot
23 * IDSEL = AD18 Serial ATA Controller (Silicon Image SiL3512A)
24 * IDSEL = AD19 USB Host Controller (NEC uPD7210100A)
25 */
26
27/* IDSEL [16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31] */
28static char se7780_irq_tab[4][16] __initdata = {
29 /* INTA */
30 { 65, 68, 67, 68, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
31 /* INTB */
32 { 66, 65, -1, 65, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
33 /* INTC */
34 { 67, 66, -1, 66, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
35 /* INTD */
36 { 68, 67, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
37};
38
39int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
40{
41 return se7780_irq_tab[pin-1][slot];
42}
43
44static struct resource se7780_io_resource = {
45 .name = "SH7780_IO",
46 .start = SH7780_PCI_IO_BASE,
47 .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
48 .flags = IORESOURCE_IO
49};
50
51static struct resource se7780_mem_resource = {
52 .name = "SH7780_mem",
53 .start = SH7780_PCI_MEMORY_BASE,
54 .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
55 .flags = IORESOURCE_MEM
56};
57
58extern struct pci_ops se7780_pci_ops;
59
60struct pci_channel board_pci_channels[] = {
61 { &sh4_pci_ops, &se7780_io_resource, &se7780_mem_resource, 0, 0xff },
62 { NULL, NULL, NULL, 0, 0 },
63};
64EXPORT_SYMBOL(board_pci_channels);
65
66static struct sh4_pci_address_map se7780_pci_map = {
67 .window0 = {
68 .base = SH7780_CS2_BASE_ADDR,
69 .size = 0x04000000,
70 },
71 .flags = SH4_PCIC_NO_RESET,
72};
73
74int __init pcibios_init_platform(void)
75{
76 printk("SH7780 PCI: Finished initialization of the PCI controller\n");
77
78 /*
79 * FPGA PCISEL register initialize
80 *
81 * CPU || SLOT1 | SLOT2 | S-ATA | USB
82 * -------------------------------------
83 * INTA || INTA | INTD | -- | INTB
84 * -------------------------------------
85 * INTB || INTB | INTA | -- | INTC
86 * -------------------------------------
87 * INTC || INTC | INTB | INTA | --
88 * -------------------------------------
89 * INTD || INTD | INTC | -- | INTA
90 * -------------------------------------
91 */
92 ctrl_outw(0x0013, FPGA_PCI_INTSEL1);
93 ctrl_outw(0xE402, FPGA_PCI_INTSEL2);
94
95 return sh7780_pcic_init(&se7780_pci_map);
96}
diff --git a/arch/sh/drivers/pci/ops-sh03.c b/arch/sh/drivers/pci/ops-sh03.c
deleted file mode 100644
index e1703ff5a4d2..000000000000
--- a/arch/sh/drivers/pci/ops-sh03.c
+++ /dev/null
@@ -1,45 +0,0 @@
1/*
2 * linux/arch/sh/drivers/pci/ops-sh03.c
3 *
4 * PCI initialization for the Interface CTP/PCI-SH03 board
5 */
6
7#include <linux/kernel.h>
8#include <linux/types.h>
9#include <linux/init.h>
10#include <linux/delay.h>
11#include <linux/pci.h>
12#include <asm/io.h>
13#include "pci-sh7751.h"
14
15/*
16 * Description: This function sets up and initializes the pcic, sets
17 * up the BARS, maps the DRAM into the address space etc, etc.
18 */
19int __init pcibios_init_platform(void)
20{
21 __set_io_port_base(SH7751_PCI_IO_BASE);
22 return 1;
23}
24
25static struct resource sh7751_io_resource = {
26 .name = "SH03 IO",
27 .start = SH7751_PCI_IO_BASE,
28 .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
29 .flags = IORESOURCE_IO
30};
31
32static struct resource sh7751_mem_resource = {
33 .name = "SH03 mem",
34 .start = SH7751_PCI_MEMORY_BASE,
35 .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
36 .flags = IORESOURCE_MEM
37};
38
39extern struct pci_ops sh4_pci_ops;
40
41struct pci_channel board_pci_channels[] = {
42 { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
43 { NULL, NULL, NULL, 0, 0 },
44};
45
diff --git a/arch/sh/drivers/pci/ops-sh4.c b/arch/sh/drivers/pci/ops-sh4.c
index 710a3b0306e5..78bebebdc99c 100644
--- a/arch/sh/drivers/pci/ops-sh4.c
+++ b/arch/sh/drivers/pci/ops-sh4.c
@@ -1,22 +1,22 @@
1/* 1/*
2 * Generic SH-4 / SH-4A PCIC operations (SH7751, SH7780). 2 * Generic SH-4 / SH-4A PCIC operations (SH7751, SH7780).
3 * 3 *
4 * Copyright (C) 2002 - 2006 Paul Mundt 4 * Copyright (C) 2002 - 2009 Paul Mundt
5 * 5 *
6 * This file is subject to the terms and conditions of the GNU General Public 6 * This file is subject to the terms and conditions of the GNU General Public
7 * License v2. See the file "COPYING" in the main directory of this archive 7 * License v2. See the file "COPYING" in the main directory of this archive
8 * for more details. 8 * for more details.
9 */ 9 */
10#include <linux/pci.h> 10#include <linux/pci.h>
11#include <linux/io.h>
11#include <asm/addrspace.h> 12#include <asm/addrspace.h>
12#include <asm/io.h>
13#include "pci-sh4.h" 13#include "pci-sh4.h"
14 14
15/* 15/*
16 * Direct access to PCI hardware... 16 * Direct access to PCI hardware...
17 */ 17 */
18#define CONFIG_CMD(bus, devfn, where) \ 18#define CONFIG_CMD(bus, devfn, where) \
19 P1SEGADDR((bus->number << 16) | (devfn << 8) | (where & ~3)) 19 (P1SEG | (bus->number << 16) | (devfn << 8) | (where & ~3))
20 20
21static DEFINE_SPINLOCK(sh4_pci_lock); 21static DEFINE_SPINLOCK(sh4_pci_lock);
22 22
@@ -26,6 +26,7 @@ static DEFINE_SPINLOCK(sh4_pci_lock);
26static int sh4_pci_read(struct pci_bus *bus, unsigned int devfn, 26static int sh4_pci_read(struct pci_bus *bus, unsigned int devfn,
27 int where, int size, u32 *val) 27 int where, int size, u32 *val)
28{ 28{
29 struct pci_channel *chan = bus->sysdata;
29 unsigned long flags; 30 unsigned long flags;
30 u32 data; 31 u32 data;
31 32
@@ -34,8 +35,8 @@ static int sh4_pci_read(struct pci_bus *bus, unsigned int devfn,
34 * so we must do byte alignment by hand 35 * so we must do byte alignment by hand
35 */ 36 */
36 spin_lock_irqsave(&sh4_pci_lock, flags); 37 spin_lock_irqsave(&sh4_pci_lock, flags);
37 pci_write_reg(CONFIG_CMD(bus, devfn, where), SH4_PCIPAR); 38 pci_write_reg(chan, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR);
38 data = pci_read_reg(SH4_PCIPDR); 39 data = pci_read_reg(chan, SH4_PCIPDR);
39 spin_unlock_irqrestore(&sh4_pci_lock, flags); 40 spin_unlock_irqrestore(&sh4_pci_lock, flags);
40 41
41 switch (size) { 42 switch (size) {
@@ -63,13 +64,14 @@ static int sh4_pci_read(struct pci_bus *bus, unsigned int devfn,
63static int sh4_pci_write(struct pci_bus *bus, unsigned int devfn, 64static int sh4_pci_write(struct pci_bus *bus, unsigned int devfn,
64 int where, int size, u32 val) 65 int where, int size, u32 val)
65{ 66{
67 struct pci_channel *chan = bus->sysdata;
66 unsigned long flags; 68 unsigned long flags;
67 int shift; 69 int shift;
68 u32 data; 70 u32 data;
69 71
70 spin_lock_irqsave(&sh4_pci_lock, flags); 72 spin_lock_irqsave(&sh4_pci_lock, flags);
71 pci_write_reg(CONFIG_CMD(bus, devfn, where), SH4_PCIPAR); 73 pci_write_reg(chan, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR);
72 data = pci_read_reg(SH4_PCIPDR); 74 data = pci_read_reg(chan, SH4_PCIPDR);
73 spin_unlock_irqrestore(&sh4_pci_lock, flags); 75 spin_unlock_irqrestore(&sh4_pci_lock, flags);
74 76
75 switch (size) { 77 switch (size) {
@@ -90,7 +92,7 @@ static int sh4_pci_write(struct pci_bus *bus, unsigned int devfn,
90 return PCIBIOS_FUNC_NOT_SUPPORTED; 92 return PCIBIOS_FUNC_NOT_SUPPORTED;
91 } 93 }
92 94
93 pci_write_reg(data, SH4_PCIPDR); 95 pci_write_reg(chan, data, SH4_PCIPDR);
94 96
95 return PCIBIOS_SUCCESSFUL; 97 return PCIBIOS_SUCCESSFUL;
96} 98}
@@ -104,66 +106,31 @@ struct pci_ops sh4_pci_ops = {
104 * Not really related to pci_ops, but it's common and not worth shoving 106 * Not really related to pci_ops, but it's common and not worth shoving
105 * somewhere else for now.. 107 * somewhere else for now..
106 */ 108 */
107static unsigned int pci_probe = PCI_PROBE_CONF1; 109int __init sh4_pci_check_direct(struct pci_channel *chan)
108
109int __init sh4_pci_check_direct(void)
110{ 110{
111 /* 111 /*
112 * Check if configuration works. 112 * Check if configuration works.
113 */ 113 */
114 if (pci_probe & PCI_PROBE_CONF1) { 114 unsigned int tmp = pci_read_reg(chan, SH4_PCIPAR);
115 unsigned int tmp = pci_read_reg(SH4_PCIPAR);
116
117 pci_write_reg(P1SEG, SH4_PCIPAR);
118 115
119 if (pci_read_reg(SH4_PCIPAR) == P1SEG) { 116 pci_write_reg(chan, P1SEG, SH4_PCIPAR);
120 pci_write_reg(tmp, SH4_PCIPAR);
121 printk(KERN_INFO "PCI: Using configuration type 1\n");
122 request_region(PCI_REG(SH4_PCIPAR), 8, "PCI conf1");
123 117
124 return 0; 118 if (pci_read_reg(chan, SH4_PCIPAR) == P1SEG) {
125 } 119 pci_write_reg(chan, tmp, SH4_PCIPAR);
126 120 printk(KERN_INFO "PCI: Using configuration type 1\n");
127 pci_write_reg(tmp, SH4_PCIPAR); 121 request_region(chan->reg_base + SH4_PCIPAR, 8,
122 "PCI conf1");
123 return 0;
128 } 124 }
129 125
130 pr_debug("PCI: pci_check_direct failed\n"); 126 pci_write_reg(chan, tmp, SH4_PCIPAR);
131 return -EINVAL;
132}
133 127
134/* Handle generic fixups */ 128 printk(KERN_ERR "PCI: %s failed\n", __func__);
135static void __init pci_fixup_ide_bases(struct pci_dev *d)
136{
137 int i;
138 129
139 /* 130 return -EINVAL;
140 * PCI IDE controllers use non-standard I/O port decoding, respect it.
141 */
142 if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
143 return;
144 pr_debug("PCI: IDE base address fixup for %s\n", pci_name(d));
145 for(i = 0; i < 4; i++) {
146 struct resource *r = &d->resource[i];
147
148 if ((r->start & ~0x80) == 0x374) {
149 r->start |= 2;
150 r->end = r->start;
151 }
152 }
153}
154DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
155
156char * __devinit pcibios_setup(char *str)
157{
158 if (!strcmp(str, "off")) {
159 pci_probe = 0;
160 return NULL;
161 }
162
163 return str;
164} 131}
165 132
166int __attribute__((weak)) pci_fixup_pcic(void) 133int __attribute__((weak)) pci_fixup_pcic(struct pci_channel *chan)
167{ 134{
168 /* Nothing to do. */ 135 /* Nothing to do. */
169 return 0; 136 return 0;
diff --git a/arch/sh/drivers/pci/ops-sh5.c b/arch/sh/drivers/pci/ops-sh5.c
index 729e38a6fe07..4ce95a001b80 100644
--- a/arch/sh/drivers/pci/ops-sh5.c
+++ b/arch/sh/drivers/pci/ops-sh5.c
@@ -22,31 +22,6 @@
22#include <asm/io.h> 22#include <asm/io.h>
23#include "pci-sh5.h" 23#include "pci-sh5.h"
24 24
25static void __init pci_fixup_ide_bases(struct pci_dev *d)
26{
27 int i;
28
29 /*
30 * PCI IDE controllers use non-standard I/O port decoding, respect it.
31 */
32 if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
33 return;
34 printk("PCI: IDE base address fixup for %s\n", pci_name(d));
35 for(i=0; i<4; i++) {
36 struct resource *r = &d->resource[i];
37 if ((r->start & ~0x80) == 0x374) {
38 r->start |= 2;
39 r->end = r->start;
40 }
41 }
42}
43DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
44
45char * __devinit pcibios_setup(char *str)
46{
47 return str;
48}
49
50static int sh5pci_read(struct pci_bus *bus, unsigned int devfn, int where, 25static int sh5pci_read(struct pci_bus *bus, unsigned int devfn, int where,
51 int size, u32 *val) 26 int size, u32 *val)
52{ 27{
diff --git a/arch/sh/drivers/pci/ops-sh7785lcr.c b/arch/sh/drivers/pci/ops-sh7785lcr.c
deleted file mode 100644
index fb0869f0bef8..000000000000
--- a/arch/sh/drivers/pci/ops-sh7785lcr.c
+++ /dev/null
@@ -1,66 +0,0 @@
1/*
2 * Author: Ian DaSilva (idasilva@mvista.com)
3 *
4 * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
5 *
6 * May be copied or modified under the terms of the GNU General Public
7 * License. See linux/COPYING for more information.
8 *
9 * PCI initialization for the Renesas R0P7785LC0011RL board
10 * Based on arch/sh/drivers/pci/ops-r7780rp.c
11 *
12 */
13#include <linux/kernel.h>
14#include <linux/types.h>
15#include <linux/init.h>
16#include <linux/delay.h>
17#include <linux/pci.h>
18#include "pci-sh4.h"
19
20static char irq_tab[] __initdata = {
21 65, 66, 67, 68,
22};
23
24int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
25{
26 return irq_tab[slot];
27}
28
29static struct resource sh7785_io_resource = {
30 .name = "SH7785_IO",
31 .start = SH7780_PCI_IO_BASE,
32 .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
33 .flags = IORESOURCE_IO
34};
35
36static struct resource sh7785_mem_resource = {
37 .name = "SH7785_mem",
38 .start = SH7780_PCI_MEMORY_BASE,
39 .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
40 .flags = IORESOURCE_MEM
41};
42
43struct pci_channel board_pci_channels[] = {
44 { &sh4_pci_ops, &sh7785_io_resource, &sh7785_mem_resource, 0, 0xff },
45 { NULL, NULL, NULL, 0, 0 },
46};
47EXPORT_SYMBOL(board_pci_channels);
48
49static struct sh4_pci_address_map sh7785_pci_map = {
50 .window0 = {
51#if defined(CONFIG_32BIT)
52 .base = SH7780_32BIT_DDR_BASE_ADDR,
53 .size = 0x40000000,
54#else
55 .base = SH7780_CS0_BASE_ADDR,
56 .size = 0x20000000,
57#endif
58 },
59
60 .flags = SH4_PCIC_NO_RESET,
61};
62
63int __init pcibios_init_platform(void)
64{
65 return sh7780_pcic_init(&sh7785_pci_map);
66}
diff --git a/arch/sh/drivers/pci/ops-snapgear.c b/arch/sh/drivers/pci/ops-snapgear.c
deleted file mode 100644
index 53dd893d4e54..000000000000
--- a/arch/sh/drivers/pci/ops-snapgear.c
+++ /dev/null
@@ -1,94 +0,0 @@
1/*
2 * arch/sh/drivers/pci/ops-snapgear.c
3 *
4 * Author: David McCullough <davidm@snapgear.com>
5 *
6 * Ported to new API by Paul Mundt <lethal@linux-sh.org>
7 *
8 * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
9 *
10 * May be copied or modified under the terms of the GNU General Public
11 * License. See linux/COPYING for more information.
12 *
13 * PCI initialization for the SnapGear boards
14 */
15#include <linux/kernel.h>
16#include <linux/types.h>
17#include <linux/init.h>
18#include <linux/pci.h>
19#include "pci-sh4.h"
20
21#define SNAPGEAR_PCI_IO 0x4000
22#define SNAPGEAR_PCI_MEM 0xfd000000
23
24/* PCI: default LOCAL memory window sizes (seen from PCI bus) */
25#define SNAPGEAR_LSR0_SIZE (64*(1<<20)) //64MB
26#define SNAPGEAR_LSR1_SIZE (64*(1<<20)) //64MB
27
28static struct resource sh7751_io_resource = {
29 .name = "SH7751 IO",
30 .start = SNAPGEAR_PCI_IO,
31 .end = SNAPGEAR_PCI_IO + (64*1024) - 1, /* 64KiB I/O */
32 .flags = IORESOURCE_IO,
33};
34
35static struct resource sh7751_mem_resource = {
36 .name = "SH7751 mem",
37 .start = SNAPGEAR_PCI_MEM,
38 .end = SNAPGEAR_PCI_MEM + (64*1024*1024) - 1, /* 64MiB mem */
39 .flags = IORESOURCE_MEM,
40};
41
42struct pci_channel board_pci_channels[] = {
43 { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
44 { 0, }
45};
46
47static struct sh4_pci_address_map sh7751_pci_map = {
48 .window0 = {
49 .base = SH7751_CS2_BASE_ADDR,
50 .size = SNAPGEAR_LSR0_SIZE,
51 },
52
53 .window1 = {
54 .base = SH7751_CS2_BASE_ADDR,
55 .size = SNAPGEAR_LSR1_SIZE,
56 },
57
58 .flags = SH4_PCIC_NO_RESET,
59};
60
61/*
62 * Initialize the SnapGear PCI interface
63 * Setup hardware to be Central Funtion
64 * Copy the BSR regs to the PCI interface
65 * Setup PCI windows into local RAM
66 */
67int __init pcibios_init_platform(void)
68{
69 return sh7751_pcic_init(&sh7751_pci_map);
70}
71
72int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
73{
74 int irq = -1;
75
76 switch (slot) {
77 case 8: /* the PCI bridge */ break;
78 case 11: irq = 8; break; /* USB */
79 case 12: irq = 11; break; /* PCMCIA */
80 case 13: irq = 5; break; /* eth0 */
81 case 14: irq = 8; break; /* eth1 */
82 case 15: irq = 11; break; /* safenet (unused) */
83 }
84
85 printk("PCI: Mapping SnapGear IRQ for slot %d, pin %c to irq %d\n",
86 slot, pin - 1 + 'A', irq);
87
88 return irq;
89}
90
91void __init pcibios_fixup(void)
92{
93 /* Nothing to fixup .. */
94}
diff --git a/arch/sh/drivers/pci/pci-auto.c b/arch/sh/drivers/pci/pci-auto.c
deleted file mode 100644
index cf48b12ee58c..000000000000
--- a/arch/sh/drivers/pci/pci-auto.c
+++ /dev/null
@@ -1,545 +0,0 @@
1/*
2 * PCI autoconfiguration library
3 *
4 * Author: Matt Porter <mporter@mvista.com>
5 *
6 * Copyright 2000, 2001 MontaVista Software Inc.
7 * Copyright 2001 Bradley D. LaRonde <brad@ltc.com>
8 * Copyright 2003 Paul Mundt <lethal@linux-sh.org>
9 *
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by the
12 * Free Software Foundation; either version 2 of the License, or (at your
13 * option) any later version.
14 */
15
16/*
17 * Modified for MIPS by Jun Sun, jsun@mvista.com
18 *
19 * . Simplify the interface between pci_auto and the rest: a single function.
20 * . Assign resources from low address to upper address.
21 * . change most int to u32.
22 *
23 * Further modified to include it as mips generic code, ppopov@mvista.com.
24 *
25 * 2001-10-26 Bradley D. LaRonde <brad@ltc.com>
26 * - Add a top_bus argument to the "early config" functions so that
27 * they can set a fake parent bus pointer to convince the underlying
28 * pci ops to use type 1 configuration for sub busses.
29 * - Set bridge base and limit registers correctly.
30 * - Align io and memory base properly before and after bridge setup.
31 * - Don't fall through to pci_setup_bars for bridge.
32 * - Reformat the debug output to look more like lspci's output.
33 *
34 * Cloned for SuperH by M. R. Brown, mrbrown@0xd6.org
35 *
36 * 2003-08-05 Paul Mundt <lethal@linux-sh.org>
37 * - Don't update the BAR values on systems that already have valid addresses
38 * and don't want these updated for whatever reason, by way of a new config
39 * option check. However, we still read in the old BAR values so that they
40 * can still be reported through the debug output.
41 */
42
43#include <linux/kernel.h>
44#include <linux/init.h>
45#include <linux/types.h>
46#include <linux/pci.h>
47
48#define DEBUG
49#ifdef DEBUG
50#define DBG(x...) printk(x)
51#else
52#define DBG(x...)
53#endif
54
55/*
56 * These functions are used early on before PCI scanning is done
57 * and all of the pci_dev and pci_bus structures have been created.
58 */
59static struct pci_dev *fake_pci_dev(struct pci_channel *hose,
60 int top_bus, int busnr, int devfn)
61{
62 static struct pci_dev dev;
63 static struct pci_bus bus;
64
65 dev.bus = &bus;
66 dev.sysdata = hose;
67 dev.devfn = devfn;
68 bus.number = busnr;
69 bus.ops = hose->pci_ops;
70
71 if(busnr != top_bus)
72 /* Fake a parent bus structure. */
73 bus.parent = &bus;
74 else
75 bus.parent = NULL;
76
77 return &dev;
78}
79
80#define EARLY_PCI_OP(rw, size, type) \
81static int early_##rw##_config_##size(struct pci_channel *hose, \
82 int top_bus, int bus, int devfn, int offset, type value) \
83{ \
84 return pci_##rw##_config_##size( \
85 fake_pci_dev(hose, top_bus, bus, devfn), \
86 offset, value); \
87}
88
89EARLY_PCI_OP(read, byte, u8 *)
90EARLY_PCI_OP(read, word, u16 *)
91EARLY_PCI_OP(read, dword, u32 *)
92EARLY_PCI_OP(write, byte, u8)
93EARLY_PCI_OP(write, word, u16)
94EARLY_PCI_OP(write, dword, u32)
95
96static struct resource *io_resource_inuse;
97static struct resource *mem_resource_inuse;
98
99static u32 pciauto_lower_iospc;
100static u32 pciauto_upper_iospc;
101
102static u32 pciauto_lower_memspc;
103static u32 pciauto_upper_memspc;
104
105static void __init
106pciauto_setup_bars(struct pci_channel *hose,
107 int top_bus,
108 int current_bus,
109 int pci_devfn,
110 int bar_limit)
111{
112 u32 bar_response, bar_size, bar_value;
113 u32 bar, addr_mask, bar_nr = 0;
114 u32 * upper_limit;
115 u32 * lower_limit;
116 int found_mem64 = 0;
117
118 for (bar = PCI_BASE_ADDRESS_0; bar <= bar_limit; bar+=4) {
119 u32 bar_addr;
120
121 /* Read the old BAR value */
122 early_read_config_dword(hose, top_bus,
123 current_bus,
124 pci_devfn,
125 bar,
126 &bar_addr);
127
128 /* Tickle the BAR and get the response */
129 early_write_config_dword(hose, top_bus,
130 current_bus,
131 pci_devfn,
132 bar,
133 0xffffffff);
134
135 early_read_config_dword(hose, top_bus,
136 current_bus,
137 pci_devfn,
138 bar,
139 &bar_response);
140
141 /*
142 * Write the old BAR value back out, only update the BAR
143 * if we implicitly want resources to be updated, which
144 * is done by the generic code further down. -- PFM.
145 */
146 early_write_config_dword(hose, top_bus,
147 current_bus,
148 pci_devfn,
149 bar,
150 bar_addr);
151
152 /* If BAR is not implemented go to the next BAR */
153 if (!bar_response)
154 continue;
155
156 /*
157 * Workaround for a BAR that doesn't use its upper word,
158 * like the ALi 1535D+ PCI DC-97 Controller Modem (M5457).
159 * bdl <brad@ltc.com>
160 */
161 if (!(bar_response & 0xffff0000))
162 bar_response |= 0xffff0000;
163
164retry:
165 /* Check the BAR type and set our address mask */
166 if (bar_response & PCI_BASE_ADDRESS_SPACE) {
167 addr_mask = PCI_BASE_ADDRESS_IO_MASK;
168 upper_limit = &pciauto_upper_iospc;
169 lower_limit = &pciauto_lower_iospc;
170 DBG(" I/O");
171 } else {
172 if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
173 PCI_BASE_ADDRESS_MEM_TYPE_64)
174 found_mem64 = 1;
175
176 addr_mask = PCI_BASE_ADDRESS_MEM_MASK;
177 upper_limit = &pciauto_upper_memspc;
178 lower_limit = &pciauto_lower_memspc;
179 DBG(" Mem");
180 }
181
182
183 /* Calculate requested size */
184 bar_size = ~(bar_response & addr_mask) + 1;
185
186 /* Allocate a base address */
187 bar_value = ((*lower_limit - 1) & ~(bar_size - 1)) + bar_size;
188
189 if ((bar_value + bar_size) > *upper_limit) {
190 if (bar_response & PCI_BASE_ADDRESS_SPACE) {
191 if (io_resource_inuse->child) {
192 io_resource_inuse =
193 io_resource_inuse->child;
194 pciauto_lower_iospc =
195 io_resource_inuse->start;
196 pciauto_upper_iospc =
197 io_resource_inuse->end + 1;
198 goto retry;
199 }
200
201 } else {
202 if (mem_resource_inuse->child) {
203 mem_resource_inuse =
204 mem_resource_inuse->child;
205 pciauto_lower_memspc =
206 mem_resource_inuse->start;
207 pciauto_upper_memspc =
208 mem_resource_inuse->end + 1;
209 goto retry;
210 }
211 }
212 DBG(" unavailable -- skipping, value %x size %x\n",
213 bar_value, bar_size);
214 continue;
215 }
216
217 if (bar_value < *lower_limit || (bar_value + bar_size) >= *upper_limit) {
218 DBG(" unavailable -- skipping, value %x size %x\n",
219 bar_value, bar_size);
220 continue;
221 }
222
223#ifdef CONFIG_PCI_AUTO_UPDATE_RESOURCES
224 /* Write it out and update our limit */
225 early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
226 bar, bar_value);
227#endif
228
229 *lower_limit = bar_value + bar_size;
230
231 /*
232 * If we are a 64-bit decoder then increment to the
233 * upper 32 bits of the bar and force it to locate
234 * in the lower 4GB of memory.
235 */
236 if (found_mem64) {
237 bar += 4;
238 early_write_config_dword(hose, top_bus,
239 current_bus,
240 pci_devfn,
241 bar,
242 0x00000000);
243 }
244
245 DBG(" at 0x%.8x [size=0x%x]\n", bar_value, bar_size);
246
247 bar_nr++;
248 }
249
250}
251
252static void __init
253pciauto_prescan_setup_bridge(struct pci_channel *hose,
254 int top_bus,
255 int current_bus,
256 int pci_devfn,
257 int sub_bus)
258{
259 /* Configure bus number registers */
260 early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
261 PCI_PRIMARY_BUS, current_bus);
262 early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
263 PCI_SECONDARY_BUS, sub_bus + 1);
264 early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
265 PCI_SUBORDINATE_BUS, 0xff);
266
267 /* Align memory and I/O to 1MB and 4KB boundaries. */
268 pciauto_lower_memspc = (pciauto_lower_memspc + (0x100000 - 1))
269 & ~(0x100000 - 1);
270 pciauto_lower_iospc = (pciauto_lower_iospc + (0x1000 - 1))
271 & ~(0x1000 - 1);
272
273 /* Set base (lower limit) of address range behind bridge. */
274 early_write_config_word(hose, top_bus, current_bus, pci_devfn,
275 PCI_MEMORY_BASE, pciauto_lower_memspc >> 16);
276 early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
277 PCI_IO_BASE, (pciauto_lower_iospc & 0x0000f000) >> 8);
278 early_write_config_word(hose, top_bus, current_bus, pci_devfn,
279 PCI_IO_BASE_UPPER16, pciauto_lower_iospc >> 16);
280
281 /* We don't support prefetchable memory for now, so disable */
282 early_write_config_word(hose, top_bus, current_bus, pci_devfn,
283 PCI_PREF_MEMORY_BASE, 0);
284 early_write_config_word(hose, top_bus, current_bus, pci_devfn,
285 PCI_PREF_MEMORY_LIMIT, 0);
286}
287
288static void __init
289pciauto_postscan_setup_bridge(struct pci_channel *hose,
290 int top_bus,
291 int current_bus,
292 int pci_devfn,
293 int sub_bus)
294{
295 u32 temp;
296
297 /*
298 * [jsun] we always bump up baselines a little, so that if there
299 * nothing behind P2P bridge, we don't wind up overlapping IO/MEM
300 * spaces.
301 */
302 pciauto_lower_memspc += 1;
303 pciauto_lower_iospc += 1;
304
305 /* Configure bus number registers */
306 early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
307 PCI_SUBORDINATE_BUS, sub_bus);
308
309 /* Set upper limit of address range behind bridge. */
310 early_write_config_word(hose, top_bus, current_bus, pci_devfn,
311 PCI_MEMORY_LIMIT, pciauto_lower_memspc >> 16);
312 early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
313 PCI_IO_LIMIT, (pciauto_lower_iospc & 0x0000f000) >> 8);
314 early_write_config_word(hose, top_bus, current_bus, pci_devfn,
315 PCI_IO_LIMIT_UPPER16, pciauto_lower_iospc >> 16);
316
317 /* Align memory and I/O to 1MB and 4KB boundaries. */
318 pciauto_lower_memspc = (pciauto_lower_memspc + (0x100000 - 1))
319 & ~(0x100000 - 1);
320 pciauto_lower_iospc = (pciauto_lower_iospc + (0x1000 - 1))
321 & ~(0x1000 - 1);
322
323 /* Enable memory and I/O accesses, enable bus master */
324 early_read_config_dword(hose, top_bus, current_bus, pci_devfn,
325 PCI_COMMAND, &temp);
326 early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
327 PCI_COMMAND, temp | PCI_COMMAND_IO | PCI_COMMAND_MEMORY
328 | PCI_COMMAND_MASTER);
329}
330
331static void __init
332pciauto_prescan_setup_cardbus_bridge(struct pci_channel *hose,
333 int top_bus,
334 int current_bus,
335 int pci_devfn,
336 int sub_bus)
337{
338 /* Configure bus number registers */
339 early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
340 PCI_PRIMARY_BUS, current_bus);
341 early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
342 PCI_SECONDARY_BUS, sub_bus + 1);
343 early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
344 PCI_SUBORDINATE_BUS, 0xff);
345
346 /* Align memory and I/O to 4KB and 4 byte boundaries. */
347 pciauto_lower_memspc = (pciauto_lower_memspc + (0x1000 - 1))
348 & ~(0x1000 - 1);
349 pciauto_lower_iospc = (pciauto_lower_iospc + (0x4 - 1))
350 & ~(0x4 - 1);
351
352 early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
353 PCI_CB_MEMORY_BASE_0, pciauto_lower_memspc);
354 early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
355 PCI_CB_IO_BASE_0, pciauto_lower_iospc);
356}
357
358static void __init
359pciauto_postscan_setup_cardbus_bridge(struct pci_channel *hose,
360 int top_bus,
361 int current_bus,
362 int pci_devfn,
363 int sub_bus)
364{
365 u32 temp;
366
367 /*
368 * [jsun] we always bump up baselines a little, so that if there
369 * nothing behind P2P bridge, we don't wind up overlapping IO/MEM
370 * spaces.
371 */
372 pciauto_lower_memspc += 1;
373 pciauto_lower_iospc += 1;
374
375 /*
376 * Configure subordinate bus number. The PCI subsystem
377 * bus scan will renumber buses (reserving three additional
378 * for this PCI<->CardBus bridge for the case where a CardBus
379 * adapter contains a P2P or CB2CB bridge.
380 */
381
382 early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
383 PCI_SUBORDINATE_BUS, sub_bus);
384
385 /*
386 * Reserve an additional 4MB for mem space and 16KB for
387 * I/O space. This should cover any additional space
388 * requirement of unusual CardBus devices with
389 * additional bridges that can consume more address space.
390 *
391 * Although pcmcia-cs currently will reprogram bridge
392 * windows, the goal is to add an option to leave them
393 * alone and use the bridge window ranges as the regions
394 * that are searched for free resources upon hot-insertion
395 * of a device. This will allow a PCI<->CardBus bridge
396 * configured by this routine to happily live behind a
397 * P2P bridge in a system.
398 */
399 /* Align memory and I/O to 4KB and 4 byte boundaries. */
400 pciauto_lower_memspc = (pciauto_lower_memspc + (0x1000 - 1))
401 & ~(0x1000 - 1);
402 pciauto_lower_iospc = (pciauto_lower_iospc + (0x4 - 1))
403 & ~(0x4 - 1);
404 /* Set up memory and I/O filter limits, assume 32-bit I/O space */
405 early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
406 PCI_CB_MEMORY_LIMIT_0, pciauto_lower_memspc - 1);
407 early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
408 PCI_CB_IO_LIMIT_0, pciauto_lower_iospc - 1);
409
410 /* Enable memory and I/O accesses, enable bus master */
411 early_read_config_dword(hose, top_bus, current_bus, pci_devfn,
412 PCI_COMMAND, &temp);
413 early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
414 PCI_COMMAND, temp | PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
415 PCI_COMMAND_MASTER);
416}
417
418#define PCIAUTO_IDE_MODE_MASK 0x05
419
420static int __init
421pciauto_bus_scan(struct pci_channel *hose, int top_bus, int current_bus)
422{
423 int sub_bus;
424 u32 pci_devfn, pci_class, cmdstat, found_multi=0;
425 unsigned short vid, did;
426 unsigned char header_type;
427 int devfn_start = 0;
428 int devfn_stop = 0xff;
429
430 sub_bus = current_bus;
431
432 if (hose->first_devfn)
433 devfn_start = hose->first_devfn;
434 if (hose->last_devfn)
435 devfn_stop = hose->last_devfn;
436
437 for (pci_devfn=devfn_start; pci_devfn<devfn_stop; pci_devfn++) {
438
439 if (PCI_FUNC(pci_devfn) && !found_multi)
440 continue;
441
442 early_read_config_word(hose, top_bus, current_bus, pci_devfn,
443 PCI_VENDOR_ID, &vid);
444
445 if (vid == 0xffff) continue;
446
447 early_read_config_byte(hose, top_bus, current_bus, pci_devfn,
448 PCI_HEADER_TYPE, &header_type);
449
450 if (!PCI_FUNC(pci_devfn))
451 found_multi = header_type & 0x80;
452
453 early_read_config_word(hose, top_bus, current_bus, pci_devfn,
454 PCI_DEVICE_ID, &did);
455
456 early_read_config_dword(hose, top_bus, current_bus, pci_devfn,
457 PCI_CLASS_REVISION, &pci_class);
458
459 DBG("%.2x:%.2x.%x Class %.4x: %.4x:%.4x",
460 current_bus, PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn),
461 pci_class >> 16, vid, did);
462 if (pci_class & 0xff)
463 DBG(" (rev %.2x)", pci_class & 0xff);
464 DBG("\n");
465
466 if ((pci_class >> 16) == PCI_CLASS_BRIDGE_PCI) {
467 DBG(" Bridge: primary=%.2x, secondary=%.2x\n",
468 current_bus, sub_bus + 1);
469 pciauto_prescan_setup_bridge(hose, top_bus, current_bus,
470 pci_devfn, sub_bus);
471 DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n",
472 sub_bus + 1,
473 pciauto_lower_iospc, pciauto_lower_memspc);
474 sub_bus = pciauto_bus_scan(hose, top_bus, sub_bus+1);
475 DBG("Back to bus %.2x\n", current_bus);
476 pciauto_postscan_setup_bridge(hose, top_bus, current_bus,
477 pci_devfn, sub_bus);
478 continue;
479 } else if ((pci_class >> 16) == PCI_CLASS_BRIDGE_CARDBUS) {
480 DBG(" CARDBUS Bridge: primary=%.2x, secondary=%.2x\n",
481 current_bus, sub_bus + 1);
482 DBG("PCI Autoconfig: Found CardBus bridge, device %d function %d\n", PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn));
483 /* Place CardBus Socket/ExCA registers */
484 pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_0);
485
486 pciauto_prescan_setup_cardbus_bridge(hose, top_bus,
487 current_bus, pci_devfn, sub_bus);
488
489 DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n",
490 sub_bus + 1,
491 pciauto_lower_iospc, pciauto_lower_memspc);
492 sub_bus = pciauto_bus_scan(hose, top_bus, sub_bus+1);
493 DBG("Back to bus %.2x, sub_bus is %x\n", current_bus, sub_bus);
494 pciauto_postscan_setup_cardbus_bridge(hose, top_bus,
495 current_bus, pci_devfn, sub_bus);
496 continue;
497 } else if ((pci_class >> 16) == PCI_CLASS_STORAGE_IDE) {
498
499 unsigned char prg_iface;
500
501 early_read_config_byte(hose, top_bus, current_bus,
502 pci_devfn, PCI_CLASS_PROG, &prg_iface);
503 if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) {
504 DBG("Skipping legacy mode IDE controller\n");
505 continue;
506 }
507 }
508
509 /*
510 * Found a peripheral, enable some standard
511 * settings
512 */
513 early_read_config_dword(hose, top_bus, current_bus, pci_devfn,
514 PCI_COMMAND, &cmdstat);
515 early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
516 PCI_COMMAND, cmdstat | PCI_COMMAND_IO |
517 PCI_COMMAND_MEMORY |
518 PCI_COMMAND_MASTER);
519 early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
520 PCI_LATENCY_TIMER, 0x80);
521
522 /* Allocate PCI I/O and/or memory space */
523 pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_5);
524 }
525 return sub_bus;
526}
527
528int __init
529pciauto_assign_resources(int busno, struct pci_channel *hose)
530{
531 /* setup resource limits */
532 io_resource_inuse = hose->io_resource;
533 mem_resource_inuse = hose->mem_resource;
534
535 pciauto_lower_iospc = io_resource_inuse->start;
536 pciauto_upper_iospc = io_resource_inuse->end + 1;
537 pciauto_lower_memspc = mem_resource_inuse->start;
538 pciauto_upper_memspc = mem_resource_inuse->end + 1;
539 DBG("Autoconfig PCI channel 0x%p\n", hose);
540 DBG("Scanning bus %.2x, I/O 0x%.8x:0x%.8x, Mem 0x%.8x:0x%.8x\n",
541 busno, pciauto_lower_iospc, pciauto_upper_iospc,
542 pciauto_lower_memspc, pciauto_upper_memspc);
543
544 return pciauto_bus_scan(hose, busno, busno);
545}
diff --git a/arch/sh/drivers/pci/pci-dreamcast.c b/arch/sh/drivers/pci/pci-dreamcast.c
new file mode 100644
index 000000000000..210f9d4af141
--- /dev/null
+++ b/arch/sh/drivers/pci/pci-dreamcast.c
@@ -0,0 +1,102 @@
1/*
2 * PCI support for the Sega Dreamcast
3 *
4 * Copyright (C) 2001, 2002 M. R. Brown
5 * Copyright (C) 2002, 2003 Paul Mundt
6 *
7 * This file originally bore the message (with enclosed-$):
8 * Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp
9 * Dreamcast PCI: Supports SEGA Broadband Adaptor only.
10 *
11 * This file is subject to the terms and conditions of the GNU General Public
12 * License. See the file "COPYING" in the main directory of this archive
13 * for more details.
14 */
15
16#include <linux/sched.h>
17#include <linux/kernel.h>
18#include <linux/param.h>
19#include <linux/interrupt.h>
20#include <linux/init.h>
21#include <linux/irq.h>
22#include <linux/pci.h>
23#include <linux/module.h>
24#include <asm/io.h>
25#include <asm/irq.h>
26#include <mach/pci.h>
27
28static struct resource gapspci_io_resource = {
29 .name = "GAPSPCI IO",
30 .start = GAPSPCI_BBA_CONFIG,
31 .end = GAPSPCI_BBA_CONFIG + GAPSPCI_BBA_CONFIG_SIZE - 1,
32 .flags = IORESOURCE_IO,
33};
34
35static struct resource gapspci_mem_resource = {
36 .name = "GAPSPCI mem",
37 .start = GAPSPCI_DMA_BASE,
38 .end = GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1,
39 .flags = IORESOURCE_MEM,
40};
41
42static struct pci_channel dreamcast_pci_controller = {
43 .pci_ops = &gapspci_pci_ops,
44 .io_resource = &gapspci_io_resource,
45 .io_offset = 0x00000000,
46 .mem_resource = &gapspci_mem_resource,
47 .mem_offset = 0x00000000,
48};
49
50/*
51 * gapspci init
52 */
53
54static int __init gapspci_init(void)
55{
56 char idbuf[16];
57 int i;
58
59 /*
60 * FIXME: All of this wants documenting to some degree,
61 * even some basic register definitions would be nice.
62 *
63 * I haven't seen anything this ugly since.. maple.
64 */
65
66 for (i=0; i<16; i++)
67 idbuf[i] = inb(GAPSPCI_REGS+i);
68
69 if (strncmp(idbuf, "GAPSPCI_BRIDGE_2", 16))
70 return -ENODEV;
71
72 outl(0x5a14a501, GAPSPCI_REGS+0x18);
73
74 for (i=0; i<1000000; i++)
75 cpu_relax();
76
77 if (inl(GAPSPCI_REGS+0x18) != 1)
78 return -EINVAL;
79
80 outl(0x01000000, GAPSPCI_REGS+0x20);
81 outl(0x01000000, GAPSPCI_REGS+0x24);
82
83 outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28);
84 outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c);
85
86 outl(1, GAPSPCI_REGS+0x14);
87 outl(1, GAPSPCI_REGS+0x34);
88
89 /* Setting Broadband Adapter */
90 outw(0xf900, GAPSPCI_BBA_CONFIG+0x06);
91 outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30);
92 outb(0x00, GAPSPCI_BBA_CONFIG+0x3c);
93 outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d);
94 outw(0x0006, GAPSPCI_BBA_CONFIG+0x04);
95 outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10);
96 outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14);
97
98 register_pci_controller(&dreamcast_pci_controller);
99
100 return 0;
101}
102arch_initcall(gapspci_init);
diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h
index a83dcf70c13b..3d5296cde622 100644
--- a/arch/sh/drivers/pci/pci-sh4.h
+++ b/arch/sh/drivers/pci/pci-sh4.h
@@ -149,13 +149,10 @@
149 #define SH4_PCIPDTR_PB0 0x000000001 /* Port 0 Enable */ 149 #define SH4_PCIPDTR_PB0 0x000000001 /* Port 0 Enable */
150#define SH4_PCIPDR 0x220 /* Port IO Data Register */ 150#define SH4_PCIPDR 0x220 /* Port IO Data Register */
151 151
152/* Flags */
153#define SH4_PCIC_NO_RESET 0x0001
154
155/* arch/sh/kernel/drivers/pci/ops-sh4.c */ 152/* arch/sh/kernel/drivers/pci/ops-sh4.c */
156extern struct pci_ops sh4_pci_ops; 153extern struct pci_ops sh4_pci_ops;
157int sh4_pci_check_direct(void); 154int sh4_pci_check_direct(struct pci_channel *chan);
158int pci_fixup_pcic(void); 155int pci_fixup_pcic(struct pci_channel *chan);
159 156
160struct sh4_pci_address_space { 157struct sh4_pci_address_space {
161 unsigned long base; 158 unsigned long base;
@@ -165,16 +162,18 @@ struct sh4_pci_address_space {
165struct sh4_pci_address_map { 162struct sh4_pci_address_map {
166 struct sh4_pci_address_space window0; 163 struct sh4_pci_address_space window0;
167 struct sh4_pci_address_space window1; 164 struct sh4_pci_address_space window1;
168 unsigned long flags;
169}; 165};
170 166
171static inline void pci_write_reg(unsigned long val, unsigned long reg) 167static inline void pci_write_reg(struct pci_channel *chan,
168 unsigned long val, unsigned long reg)
172{ 169{
173 ctrl_outl(val, PCI_REG(reg)); 170 ctrl_outl(val, chan->reg_base + reg);
174} 171}
175 172
176static inline unsigned long pci_read_reg(unsigned long reg) 173static inline unsigned long pci_read_reg(struct pci_channel *chan,
174 unsigned long reg)
177{ 175{
178 return ctrl_inl(PCI_REG(reg)); 176 return ctrl_inl(chan->reg_base + reg);
179} 177}
178
180#endif /* __PCI_SH4_H */ 179#endif /* __PCI_SH4_H */
diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c
index 7a97438762c8..cf431852213c 100644
--- a/arch/sh/drivers/pci/pci-sh5.c
+++ b/arch/sh/drivers/pci/pci-sh5.c
@@ -89,8 +89,21 @@ static irqreturn_t pcish5_serr_irq(int irq, void *dev_id)
89 return IRQ_NONE; 89 return IRQ_NONE;
90} 90}
91 91
92int __init sh5pci_init(unsigned long memStart, unsigned long memSize) 92static struct resource sh5_io_resource = { /* place holder */ };
93static struct resource sh5_mem_resource = { /* place holder */ };
94
95static struct pci_channel sh5pci_controller = {
96 .pci_ops = &sh5_pci_ops,
97 .mem_resource = &sh5_mem_resource,
98 .mem_offset = 0x00000000,
99 .io_resource = &sh5_io_resource,
100 .io_offset = 0x00000000,
101};
102
103static int __init sh5pci_init(void)
93{ 104{
105 unsigned long memStart = __pa(memory_start);
106 unsigned long memSize = __pa(memory_end) - memStart;
94 u32 lsr0; 107 u32 lsr0;
95 u32 uval; 108 u32 uval;
96 109
@@ -197,32 +210,14 @@ int __init sh5pci_init(unsigned long memStart, unsigned long memSize)
197 SH5PCI_WRITE(AINTM, ~0); 210 SH5PCI_WRITE(AINTM, ~0);
198 SH5PCI_WRITE(PINTM, ~0); 211 SH5PCI_WRITE(PINTM, ~0);
199 212
200 return 0; 213 sh5_io_resource.start = PCI_IO_AREA;
201} 214 sh5_io_resource.end = PCI_IO_AREA + 0x10000;
202 215
203void __devinit pcibios_fixup_bus(struct pci_bus *bus) 216 sh5_mem_resource.start = memStart;
204{ 217 sh5_mem_resource.end = memStart + memSize;
205 struct pci_dev *dev = bus->self; 218
206 int i; 219 register_pci_controller(&sh5pci_controller);
207 220
208 if (dev) { 221 return 0;
209 for (i= 0; i < 3; i++) {
210 bus->resource[i] =
211 &dev->resource[PCI_BRIDGE_RESOURCES+i];
212 bus->resource[i]->name = bus->name;
213 }
214 bus->resource[0]->flags |= IORESOURCE_IO;
215 bus->resource[1]->flags |= IORESOURCE_MEM;
216
217 /* For now, propagate host limits to the bus;
218 * we'll adjust them later. */
219 bus->resource[0]->end = 64*1024 - 1 ;
220 bus->resource[1]->end = PCIBIOS_MIN_MEM+(256*1024*1024)-1;
221 bus->resource[0]->start = PCIBIOS_MIN_IO;
222 bus->resource[1]->start = PCIBIOS_MIN_MEM;
223
224 /* Turn off downstream PF memory address range by default */
225 bus->resource[2]->start = 1024*1024;
226 bus->resource[2]->end = bus->resource[2]->start - 1;
227 }
228} 222}
223arch_initcall(sh5pci_init);
diff --git a/arch/sh/drivers/pci/pci-sh5.h b/arch/sh/drivers/pci/pci-sh5.h
index 7cff3fc04d30..f277628221f3 100644
--- a/arch/sh/drivers/pci/pci-sh5.h
+++ b/arch/sh/drivers/pci/pci-sh5.h
@@ -107,7 +107,4 @@ extern unsigned long pcicr_virt;
107 107
108extern struct pci_ops sh5_pci_ops; 108extern struct pci_ops sh5_pci_ops;
109 109
110/* arch/sh/drivers/pci/pci-sh5.c */
111int sh5pci_init(unsigned long memStart, unsigned long memSize);
112
113#endif /* __PCI_SH5_H */ 110#endif /* __PCI_SH5_H */
diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c
index 3065eb184f01..c4fa0bb13976 100644
--- a/arch/sh/drivers/pci/pci-sh7751.c
+++ b/arch/sh/drivers/pci/pci-sh7751.c
@@ -1,88 +1,99 @@
1/* 1/*
2 * Low-Level PCI Support for the SH7751 2 * Low-Level PCI Support for the SH7751
3 * 3 *
4 * Dustin McIntire (dustin@sensoria.com) 4 * Copyright (C) 2003 - 2009 Paul Mundt
5 * Derived from arch/i386/kernel/pci-*.c which bore the message: 5 * Copyright (C) 2001 Dustin McIntire
6 * (c) 1999--2000 Martin Mares <mj@ucw.cz>
7 * 6 *
8 * Ported to the new API by Paul Mundt <lethal@linux-sh.org> 7 * With cleanup by Paul van Gool <pvangool@mimotech.com>, 2003.
9 * With cleanup by Paul van Gool <pvangool@mimotech.com>
10 *
11 * May be copied or modified under the terms of the GNU General Public
12 * License. See linux/COPYING for more information.
13 * 8 *
9 * This file is subject to the terms and conditions of the GNU General Public
10 * License. See the file "COPYING" in the main directory of this archive
11 * for more details.
14 */ 12 */
15#undef DEBUG
16
17#include <linux/init.h> 13#include <linux/init.h>
18#include <linux/pci.h> 14#include <linux/pci.h>
19#include <linux/types.h> 15#include <linux/types.h>
20#include <linux/errno.h> 16#include <linux/errno.h>
21#include <linux/delay.h> 17#include <linux/io.h>
22#include "pci-sh4.h" 18#include "pci-sh4.h"
23#include <asm/addrspace.h> 19#include <asm/addrspace.h>
24#include <asm/io.h>
25 20
26/* 21static int __init __area_sdram_check(struct pci_channel *chan,
27 * Initialization. Try all known PCI access methods. Note that we support 22 unsigned int area)
28 * using both PCI BIOS and direct access: in such cases, we use I/O ports
29 * to access config space.
30 *
31 * Note that the platform specific initialization (BSC registers, and memory
32 * space mapping) will be called via the platform defined function
33 * pcibios_init_platform().
34 */
35static int __init sh7751_pci_init(void)
36{ 23{
37 unsigned int id; 24 unsigned long word;
38 int ret;
39
40 pr_debug("PCI: Starting intialization.\n");
41 25
42 /* check for SH7751/SH7751R hardware */ 26 word = __raw_readl(SH7751_BCR1);
43 id = pci_read_reg(SH7751_PCICONF0);
44 if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) &&
45 id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) {
46 pr_debug("PCI: This is not an SH7751(R) (%x)\n", id);
47 return -ENODEV;
48 }
49
50 if ((ret = sh4_pci_check_direct()) != 0)
51 return ret;
52
53 return pcibios_init_platform();
54}
55subsys_initcall(sh7751_pci_init);
56
57static int __init __area_sdram_check(unsigned int area)
58{
59 u32 word;
60
61 word = ctrl_inl(SH7751_BCR1);
62 /* check BCR for SDRAM in area */ 27 /* check BCR for SDRAM in area */
63 if (((word >> area) & 1) == 0) { 28 if (((word >> area) & 1) == 0) {
64 printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%x\n", 29 printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%lx\n",
65 area, word); 30 area, word);
66 return 0; 31 return 0;
67 } 32 }
68 pci_write_reg(word, SH4_PCIBCR1); 33 pci_write_reg(chan, word, SH4_PCIBCR1);
69 34
70 word = (u16)ctrl_inw(SH7751_BCR2); 35 word = __raw_readw(SH7751_BCR2);
71 /* check BCR2 for 32bit SDRAM interface*/ 36 /* check BCR2 for 32bit SDRAM interface*/
72 if (((word >> (area << 1)) & 0x3) != 0x3) { 37 if (((word >> (area << 1)) & 0x3) != 0x3) {
73 printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%x\n", 38 printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%lx\n",
74 area, word); 39 area, word);
75 return 0; 40 return 0;
76 } 41 }
77 pci_write_reg(word, SH4_PCIBCR2); 42 pci_write_reg(chan, word, SH4_PCIBCR2);
78 43
79 return 1; 44 return 1;
80} 45}
81 46
82int __init sh7751_pcic_init(struct sh4_pci_address_map *map) 47static struct resource sh7751_io_resource = {
48 .name = "SH7751_IO",
49 .start = SH7751_PCI_IO_BASE,
50 .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
51 .flags = IORESOURCE_IO
52};
53
54static struct resource sh7751_mem_resource = {
55 .name = "SH7785_mem",
56 .start = SH7751_PCI_MEMORY_BASE,
57 .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
58 .flags = IORESOURCE_MEM
59};
60
61static struct pci_channel sh7751_pci_controller = {
62 .pci_ops = &sh4_pci_ops,
63 .mem_resource = &sh7751_mem_resource,
64 .mem_offset = 0x00000000,
65 .io_resource = &sh7751_io_resource,
66 .io_offset = 0x00000000,
67};
68
69static struct sh4_pci_address_map sh7751_pci_map = {
70 .window0 = {
71 .base = SH7751_CS3_BASE_ADDR,
72 .size = 0x04000000,
73 },
74};
75
76static int __init sh7751_pci_init(void)
83{ 77{
84 u32 reg; 78 struct pci_channel *chan = &sh7751_pci_controller;
85 u32 word; 79 unsigned int id;
80 u32 word, reg;
81 int ret;
82
83 printk(KERN_NOTICE "PCI: Starting intialization.\n");
84
85 chan->reg_base = 0xfe200000;
86
87 /* check for SH7751/SH7751R hardware */
88 id = pci_read_reg(chan, SH7751_PCICONF0);
89 if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) &&
90 id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) {
91 pr_debug("PCI: This is not an SH7751(R) (%x)\n", id);
92 return -ENODEV;
93 }
94
95 if ((ret = sh4_pci_check_direct(chan)) != 0)
96 return ret;
86 97
87 /* Set the BCR's to enable PCI access */ 98 /* Set the BCR's to enable PCI access */
88 reg = ctrl_inl(SH7751_BCR1); 99 reg = ctrl_inl(SH7751_BCR1);
@@ -90,25 +101,10 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map)
90 ctrl_outl(reg, SH7751_BCR1); 101 ctrl_outl(reg, SH7751_BCR1);
91 102
92 /* Turn the clocks back on (not done in reset)*/ 103 /* Turn the clocks back on (not done in reset)*/
93 pci_write_reg(0, SH4_PCICLKR); 104 pci_write_reg(chan, 0, SH4_PCICLKR);
94 /* Clear Powerdown IRQ's (not done in reset) */ 105 /* Clear Powerdown IRQ's (not done in reset) */
95 word = SH4_PCIPINT_D3 | SH4_PCIPINT_D0; 106 word = SH4_PCIPINT_D3 | SH4_PCIPINT_D0;
96 pci_write_reg(word, SH4_PCIPINT); 107 pci_write_reg(chan, word, SH4_PCIPINT);
97
98 /*
99 * This code is unused for some boards as it is done in the
100 * bootloader and doing it here means the MAC addresses loaded
101 * by the bootloader get lost.
102 */
103 if (!(map->flags & SH4_PCIC_NO_RESET)) {
104 /* toggle PCI reset pin */
105 word = SH4_PCICR_PREFIX | SH4_PCICR_PRST;
106 pci_write_reg(word, SH4_PCICR);
107 /* Wait for a long time... not 1 sec. but long enough */
108 mdelay(100);
109 word = SH4_PCICR_PREFIX;
110 pci_write_reg(word, SH4_PCICR);
111 }
112 108
113 /* set the command/status bits to: 109 /* set the command/status bits to:
114 * Wait Cycle Control + Parity Enable + Bus Master + 110 * Wait Cycle Control + Parity Enable + Bus Master +
@@ -116,89 +112,77 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map)
116 */ 112 */
117 word = SH7751_PCICONF1_WCC | SH7751_PCICONF1_PER | 113 word = SH7751_PCICONF1_WCC | SH7751_PCICONF1_PER |
118 SH7751_PCICONF1_BUM | SH7751_PCICONF1_MES; 114 SH7751_PCICONF1_BUM | SH7751_PCICONF1_MES;
119 pci_write_reg(word, SH7751_PCICONF1); 115 pci_write_reg(chan, word, SH7751_PCICONF1);
120 116
121 /* define this host as the host bridge */ 117 /* define this host as the host bridge */
122 word = PCI_BASE_CLASS_BRIDGE << 24; 118 word = PCI_BASE_CLASS_BRIDGE << 24;
123 pci_write_reg(word, SH7751_PCICONF2); 119 pci_write_reg(chan, word, SH7751_PCICONF2);
124 120
125 /* Set IO and Mem windows to local address 121 /* Set IO and Mem windows to local address
126 * Make PCI and local address the same for easy 1 to 1 mapping 122 * Make PCI and local address the same for easy 1 to 1 mapping
127 * Window0 = map->window0.size @ non-cached area base = SDRAM
128 * Window1 = map->window1.size @ cached area base = SDRAM
129 */ 123 */
130 word = map->window0.size - 1; 124 word = sh7751_pci_map.window0.size - 1;
131 pci_write_reg(word, SH4_PCILSR0); 125 pci_write_reg(chan, word, SH4_PCILSR0);
132 word = map->window1.size - 1;
133 pci_write_reg(word, SH4_PCILSR1);
134 /* Set the values on window 0 PCI config registers */ 126 /* Set the values on window 0 PCI config registers */
135 word = P2SEGADDR(map->window0.base); 127 word = P2SEGADDR(sh7751_pci_map.window0.base);
136 pci_write_reg(word, SH4_PCILAR0); 128 pci_write_reg(chan, word, SH4_PCILAR0);
137 pci_write_reg(word, SH7751_PCICONF5); 129 pci_write_reg(chan, word, SH7751_PCICONF5);
138 /* Set the values on window 1 PCI config registers */
139 word = PHYSADDR(map->window1.base);
140 pci_write_reg(word, SH4_PCILAR1);
141 pci_write_reg(word, SH7751_PCICONF6);
142 130
143 /* Set the local 16MB PCI memory space window to 131 /* Set the local 16MB PCI memory space window to
144 * the lowest PCI mapped address 132 * the lowest PCI mapped address
145 */ 133 */
146 word = PCIBIOS_MIN_MEM & SH4_PCIMBR_MASK; 134 word = chan->mem_resource->start & SH4_PCIMBR_MASK;
147 pr_debug("PCI: Setting upper bits of Memory window to 0x%x\n", word); 135 pr_debug("PCI: Setting upper bits of Memory window to 0x%x\n", word);
148 pci_write_reg(word , SH4_PCIMBR); 136 pci_write_reg(chan, word , SH4_PCIMBR);
149
150 /* Map IO space into PCI IO window
151 * The IO window is 64K-PCIBIOS_MIN_IO in size
152 * IO addresses will be translated to the
153 * PCI IO window base address
154 */
155 pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n",
156 PCIBIOS_MIN_IO, (64 << 10),
157 SH7751_PCI_IO_BASE + PCIBIOS_MIN_IO);
158 137
159 /* Make sure the MSB's of IO window are set to access PCI space 138 /* Make sure the MSB's of IO window are set to access PCI space
160 * correctly */ 139 * correctly */
161 word = PCIBIOS_MIN_IO & SH4_PCIIOBR_MASK; 140 word = chan->io_resource->start & SH4_PCIIOBR_MASK;
162 pr_debug("PCI: Setting upper bits of IO window to 0x%x\n", word); 141 pr_debug("PCI: Setting upper bits of IO window to 0x%x\n", word);
163 pci_write_reg(word, SH4_PCIIOBR); 142 pci_write_reg(chan, word, SH4_PCIIOBR);
164 143
165 /* Set PCI WCRx, BCRx's, copy from BSC locations */ 144 /* Set PCI WCRx, BCRx's, copy from BSC locations */
166 145
167 /* check BCR for SDRAM in specified area */ 146 /* check BCR for SDRAM in specified area */
168 switch (map->window0.base) { 147 switch (sh7751_pci_map.window0.base) {
169 case SH7751_CS0_BASE_ADDR: word = __area_sdram_check(0); break; 148 case SH7751_CS0_BASE_ADDR: word = __area_sdram_check(chan, 0); break;
170 case SH7751_CS1_BASE_ADDR: word = __area_sdram_check(1); break; 149 case SH7751_CS1_BASE_ADDR: word = __area_sdram_check(chan, 1); break;
171 case SH7751_CS2_BASE_ADDR: word = __area_sdram_check(2); break; 150 case SH7751_CS2_BASE_ADDR: word = __area_sdram_check(chan, 2); break;
172 case SH7751_CS3_BASE_ADDR: word = __area_sdram_check(3); break; 151 case SH7751_CS3_BASE_ADDR: word = __area_sdram_check(chan, 3); break;
173 case SH7751_CS4_BASE_ADDR: word = __area_sdram_check(4); break; 152 case SH7751_CS4_BASE_ADDR: word = __area_sdram_check(chan, 4); break;
174 case SH7751_CS5_BASE_ADDR: word = __area_sdram_check(5); break; 153 case SH7751_CS5_BASE_ADDR: word = __area_sdram_check(chan, 5); break;
175 case SH7751_CS6_BASE_ADDR: word = __area_sdram_check(6); break; 154 case SH7751_CS6_BASE_ADDR: word = __area_sdram_check(chan, 6); break;
176 } 155 }
177 156
178 if (!word) 157 if (!word)
179 return 0; 158 return -1;
180 159
181 /* configure the wait control registers */ 160 /* configure the wait control registers */
182 word = ctrl_inl(SH7751_WCR1); 161 word = ctrl_inl(SH7751_WCR1);
183 pci_write_reg(word, SH4_PCIWCR1); 162 pci_write_reg(chan, word, SH4_PCIWCR1);
184 word = ctrl_inl(SH7751_WCR2); 163 word = ctrl_inl(SH7751_WCR2);
185 pci_write_reg(word, SH4_PCIWCR2); 164 pci_write_reg(chan, word, SH4_PCIWCR2);
186 word = ctrl_inl(SH7751_WCR3); 165 word = ctrl_inl(SH7751_WCR3);
187 pci_write_reg(word, SH4_PCIWCR3); 166 pci_write_reg(chan, word, SH4_PCIWCR3);
188 word = ctrl_inl(SH7751_MCR); 167 word = ctrl_inl(SH7751_MCR);
189 pci_write_reg(word, SH4_PCIMCR); 168 pci_write_reg(chan, word, SH4_PCIMCR);
190 169
191 /* NOTE: I'm ignoring the PCI error IRQs for now.. 170 /* NOTE: I'm ignoring the PCI error IRQs for now..
192 * TODO: add support for the internal error interrupts and 171 * TODO: add support for the internal error interrupts and
193 * DMA interrupts... 172 * DMA interrupts...
194 */ 173 */
195 174
196 pci_fixup_pcic(); 175 pci_fixup_pcic(chan);
197 176
198 /* SH7751 init done, set central function init complete */ 177 /* SH7751 init done, set central function init complete */
199 /* use round robin mode to stop a device starving/overruning */ 178 /* use round robin mode to stop a device starving/overruning */
200 word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM; 179 word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM;
201 pci_write_reg(word, SH4_PCICR); 180 pci_write_reg(chan, word, SH4_PCICR);
202 181
203 return 1; 182 __set_io_port_base(SH7751_PCI_IO_BASE);
183
184 register_pci_controller(chan);
185
186 return 0;
204} 187}
188arch_initcall(sh7751_pci_init);
diff --git a/arch/sh/drivers/pci/pci-sh7751.h b/arch/sh/drivers/pci/pci-sh7751.h
index 68e3cb5e6bec..4983a4d20355 100644
--- a/arch/sh/drivers/pci/pci-sh7751.h
+++ b/arch/sh/drivers/pci/pci-sh7751.h
@@ -26,7 +26,6 @@
26#define SH7751_PCI_IO_SIZE 0x40000 /* Size of IO window */ 26#define SH7751_PCI_IO_SIZE 0x40000 /* Size of IO window */
27 27
28#define SH7751_PCIREG_BASE 0xFE200000 /* PCI regs base address */ 28#define SH7751_PCIREG_BASE 0xFE200000 /* PCI regs base address */
29#define PCI_REG(n) (SH7751_PCIREG_BASE+ n)
30 29
31#define SH7751_PCICONF0 0x0 /* PCI Config Reg 0 */ 30#define SH7751_PCICONF0 0x0 /* PCI Config Reg 0 */
32 #define SH7751_PCICONF0_DEVID 0xFFFF0000 /* Device ID */ 31 #define SH7751_PCICONF0_DEVID 0xFFFF0000 /* Device ID */
@@ -58,7 +57,7 @@
58 #define SH7751_PCICONF2_SCC 0x00FF0000 /* Sub-Class Code */ 57 #define SH7751_PCICONF2_SCC 0x00FF0000 /* Sub-Class Code */
59 #define SH7751_PCICONF2_RLPI 0x0000FF00 /* Programming Interface */ 58 #define SH7751_PCICONF2_RLPI 0x0000FF00 /* Programming Interface */
60 #define SH7751_PCICONF2_REV 0x000000FF /* Revision ID */ 59 #define SH7751_PCICONF2_REV 0x000000FF /* Revision ID */
61#define SH7751_PCICONF3 0xC /* PCI Config Reg 3 */ 60#define SH7751_PCICONF3 0xC /* PCI Config Reg 3 */
62 #define SH7751_PCICONF3_BIST7 0x80000000 /* Bist Supported */ 61 #define SH7751_PCICONF3_BIST7 0x80000000 /* Bist Supported */
63 #define SH7751_PCICONF3_BIST6 0x40000000 /* Bist Executing */ 62 #define SH7751_PCICONF3_BIST6 0x40000000 /* Bist Executing */
64 #define SH7751_PCICONF3_BIST3_0 0x0F000000 /* Bist Passed */ 63 #define SH7751_PCICONF3_BIST3_0 0x0F000000 /* Bist Passed */
@@ -73,12 +72,12 @@
73 #define SH7751_PCICONF5_BASE 0xFFFFFFF0 /* Mem Space Base Addr */ 72 #define SH7751_PCICONF5_BASE 0xFFFFFFF0 /* Mem Space Base Addr */
74 #define SH7751_PCICONF5_LAP 0x00000008 /* Prefetch Enabled */ 73 #define SH7751_PCICONF5_LAP 0x00000008 /* Prefetch Enabled */
75 #define SH7751_PCICONF5_LAT 0x00000006 /* Local Memory type */ 74 #define SH7751_PCICONF5_LAT 0x00000006 /* Local Memory type */
76 #define SH7751_PCICONF5_ASI 0x00000001 /* Address Space Type */ 75 #define SH7751_PCICONF5_ASI 0x00000001 /* Address Space Type */
77#define SH7751_PCICONF6 0x18 /* PCI Config Reg 6 */ 76#define SH7751_PCICONF6 0x18 /* PCI Config Reg 6 */
78 #define SH7751_PCICONF6_BASE 0xFFFFFFF0 /* Mem Space Base Addr */ 77 #define SH7751_PCICONF6_BASE 0xFFFFFFF0 /* Mem Space Base Addr */
79 #define SH7751_PCICONF6_LAP 0x00000008 /* Prefetch Enabled */ 78 #define SH7751_PCICONF6_LAP 0x00000008 /* Prefetch Enabled */
80 #define SH7751_PCICONF6_LAT 0x00000006 /* Local Memory type */ 79 #define SH7751_PCICONF6_LAT 0x00000006 /* Local Memory type */
81 #define SH7751_PCICONF6_ASI 0x00000001 /* Address Space Type */ 80 #define SH7751_PCICONF6_ASI 0x00000001 /* Address Space Type */
82/* PCICONF7 - PCICONF10 are undefined */ 81/* PCICONF7 - PCICONF10 are undefined */
83#define SH7751_PCICONF11 0x2C /* PCI Config Reg 11 */ 82#define SH7751_PCICONF11 0x2C /* PCI Config Reg 11 */
84 #define SH7751_PCICONF11_SSID 0xFFFF0000 /* Subsystem ID */ 83 #define SH7751_PCICONF11_SSID 0xFFFF0000 /* Subsystem ID */
@@ -127,9 +126,4 @@
127#define SH7751_CS5_BASE_ADDR (SH7751_CS4_BASE_ADDR + SH7751_MEM_REGION_SIZE) 126#define SH7751_CS5_BASE_ADDR (SH7751_CS4_BASE_ADDR + SH7751_MEM_REGION_SIZE)
128#define SH7751_CS6_BASE_ADDR (SH7751_CS5_BASE_ADDR + SH7751_MEM_REGION_SIZE) 127#define SH7751_CS6_BASE_ADDR (SH7751_CS5_BASE_ADDR + SH7751_MEM_REGION_SIZE)
129 128
130struct sh4_pci_address_map;
131
132/* arch/sh/drivers/pci/pci-sh7751.c */
133int sh7751_pcic_init(struct sh4_pci_address_map *map);
134
135#endif /* _PCI_SH7751_H_ */ 129#endif /* _PCI_SH7751_H_ */
diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c
index bae6a2cf047d..ae13ff925c61 100644
--- a/arch/sh/drivers/pci/pci-sh7780.c
+++ b/arch/sh/drivers/pci/pci-sh7780.c
@@ -1,19 +1,12 @@
1/* 1/*
2 * Low-Level PCI Support for the SH7780 2 * Low-Level PCI Support for the SH7780
3 * 3 *
4 * Dustin McIntire (dustin@sensoria.com) 4 * Copyright (C) 2005 - 2009 Paul Mundt
5 * Derived from arch/i386/kernel/pci-*.c which bore the message:
6 * (c) 1999--2000 Martin Mares <mj@ucw.cz>
7 *
8 * Ported to the new API by Paul Mundt <lethal@linux-sh.org>
9 * With cleanup by Paul van Gool <pvangool@mimotech.com>
10 *
11 * May be copied or modified under the terms of the GNU General Public
12 * License. See linux/COPYING for more information.
13 * 5 *
6 * This file is subject to the terms and conditions of the GNU General Public
7 * License. See the file "COPYING" in the main directory of this archive
8 * for more details.
14 */ 9 */
15#undef DEBUG
16
17#include <linux/types.h> 10#include <linux/types.h>
18#include <linux/kernel.h> 11#include <linux/kernel.h>
19#include <linux/init.h> 12#include <linux/init.h>
@@ -22,135 +15,137 @@
22#include <linux/delay.h> 15#include <linux/delay.h>
23#include "pci-sh4.h" 16#include "pci-sh4.h"
24 17
25#define INTC_BASE 0xffd00000 18extern u8 pci_cache_line_size;
26#define INTC_ICR0 (INTC_BASE+0x0) 19
27#define INTC_ICR1 (INTC_BASE+0x1c) 20static struct resource sh7785_io_resource = {
28#define INTC_INTPRI (INTC_BASE+0x10) 21 .name = "SH7785_IO",
29#define INTC_INTREQ (INTC_BASE+0x24) 22 .start = SH7780_PCI_IO_BASE,
30#define INTC_INTMSK0 (INTC_BASE+0x44) 23 .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
31#define INTC_INTMSK1 (INTC_BASE+0x48) 24 .flags = IORESOURCE_IO
32#define INTC_INTMSK2 (INTC_BASE+0x40080) 25};
33#define INTC_INTMSKCLR0 (INTC_BASE+0x64) 26
34#define INTC_INTMSKCLR1 (INTC_BASE+0x68) 27static struct resource sh7785_mem_resource = {
35#define INTC_INTMSKCLR2 (INTC_BASE+0x40084) 28 .name = "SH7785_mem",
36#define INTC_INT2MSKR (INTC_BASE+0x40038) 29 .start = SH7780_PCI_MEMORY_BASE,
37#define INTC_INT2MSKCR (INTC_BASE+0x4003c) 30 .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
31 .flags = IORESOURCE_MEM
32};
33
34static struct pci_channel sh7780_pci_controller = {
35 .pci_ops = &sh4_pci_ops,
36 .mem_resource = &sh7785_mem_resource,
37 .mem_offset = 0x00000000,
38 .io_resource = &sh7785_io_resource,
39 .io_offset = 0x00000000,
40};
41
42static struct sh4_pci_address_map sh7780_pci_map = {
43 .window0 = {
44#if defined(CONFIG_32BIT)
45 .base = SH7780_32BIT_DDR_BASE_ADDR,
46 .size = 0x40000000,
47#else
48 .base = SH7780_CS0_BASE_ADDR,
49 .size = 0x20000000,
50#endif
51 },
52};
38 53
39/*
40 * Initialization. Try all known PCI access methods. Note that we support
41 * using both PCI BIOS and direct access: in such cases, we use I/O ports
42 * to access config space.
43 *
44 * Note that the platform specific initialization (BSC registers, and memory
45 * space mapping) will be called via the platform defined function
46 * pcibios_init_platform().
47 */
48static int __init sh7780_pci_init(void) 54static int __init sh7780_pci_init(void)
49{ 55{
56 struct pci_channel *chan = &sh7780_pci_controller;
50 unsigned int id; 57 unsigned int id;
51 int ret, match = 0; 58 const char *type = NULL;
52 59 int ret;
53 pr_debug("PCI: Starting intialization.\n"); 60 u32 word;
54
55 ctrl_outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */
56
57 /* check for SH7780/SH7780R hardware */
58 id = pci_read_reg(SH7780_PCIVID);
59 if ((id & 0xffff) == SH7780_VENDOR_ID) {
60 switch ((id >> 16) & 0xffff) {
61 case SH7763_DEVICE_ID:
62 case SH7780_DEVICE_ID:
63 case SH7781_DEVICE_ID:
64 case SH7785_DEVICE_ID:
65 match = 1;
66 break;
67 }
68 }
69 61
70 if (unlikely(!match)) { 62 printk(KERN_NOTICE "PCI: Starting intialization.\n");
71 printk(KERN_ERR "PCI: This is not an SH7780 (%x)\n", id); 63
64 chan->reg_base = 0xfe040000;
65
66 /* Enable CPU access to the PCIC registers. */
67 __raw_writel(PCIECR_ENBL, PCIECR);
68
69 id = __raw_readw(chan->reg_base + SH7780_PCIVID);
70 if (id != SH7780_VENDOR_ID) {
71 printk(KERN_ERR "PCI: Unknown vendor ID 0x%04x.\n", id);
72 return -ENODEV; 72 return -ENODEV;
73 } 73 }
74 74
75 /* Setup the INTC */ 75 id = __raw_readw(chan->reg_base + SH7780_PCIDID);
76 if (mach_is_7780se()) { 76 type = (id == SH7763_DEVICE_ID) ? "SH7763" :
77 /* ICR0: IRL=use separately */ 77 (id == SH7780_DEVICE_ID) ? "SH7780" :
78 ctrl_outl(0x00C00020, INTC_ICR0); 78 (id == SH7781_DEVICE_ID) ? "SH7781" :
79 /* ICR1: detect low level(for 2ndcut) */ 79 (id == SH7785_DEVICE_ID) ? "SH7785" :
80 ctrl_outl(0xAAAA0000, INTC_ICR1); 80 NULL;
81 /* INTPRI: priority=3(all) */ 81 if (unlikely(!type)) {
82 ctrl_outl(0x33333333, INTC_INTPRI); 82 printk(KERN_ERR "PCI: Found an unsupported Renesas host "
83 "controller, device id 0x%04x.\n", id);
84 return -EINVAL;
83 } 85 }
84 86
85 if ((ret = sh4_pci_check_direct()) != 0) 87 printk(KERN_NOTICE "PCI: Found a Renesas %s host "
86 return ret; 88 "controller, revision %d.\n", type,
89 __raw_readb(chan->reg_base + SH7780_PCIRID));
87 90
88 return pcibios_init_platform(); 91 if ((ret = sh4_pci_check_direct(chan)) != 0)
89} 92 return ret;
90core_initcall(sh7780_pci_init);
91
92int __init sh7780_pcic_init(struct sh4_pci_address_map *map)
93{
94 u32 word;
95 93
96 /* 94 /*
97 * This code is unused for some boards as it is done in the 95 * Set the class and sub-class codes.
98 * bootloader and doing it here means the MAC addresses loaded
99 * by the bootloader get lost.
100 */
101 if (!(map->flags & SH4_PCIC_NO_RESET)) {
102 /* toggle PCI reset pin */
103 word = SH4_PCICR_PREFIX | SH4_PCICR_PRST;
104 pci_write_reg(word, SH4_PCICR);
105 /* Wait for a long time... not 1 sec. but long enough */
106 mdelay(100);
107 word = SH4_PCICR_PREFIX;
108 pci_write_reg(word, SH4_PCICR);
109 }
110
111 /* set the command/status bits to:
112 * Wait Cycle Control + Parity Enable + Bus Master +
113 * Mem space enable
114 */ 96 */
115 pci_write_reg(0x00000046, SH7780_PCICMD); 97 __raw_writeb(PCI_CLASS_BRIDGE_HOST >> 8,
98 chan->reg_base + SH7780_PCIBCC);
99 __raw_writeb(PCI_CLASS_BRIDGE_HOST & 0xff,
100 chan->reg_base + SH7780_PCISUB);
116 101
117 /* define this host as the host bridge */ 102 pci_cache_line_size = pci_read_reg(chan, SH7780_PCICLS) / 4;
118 word = PCI_BASE_CLASS_BRIDGE << 24;
119 pci_write_reg(word, SH7780_PCIRID);
120 103
121 /* Set IO and Mem windows to local address 104 /*
105 * Set IO and Mem windows to local address
122 * Make PCI and local address the same for easy 1 to 1 mapping 106 * Make PCI and local address the same for easy 1 to 1 mapping
123 */ 107 */
124 pci_write_reg(map->window0.size - 0xfffff, SH4_PCILSR0); 108 pci_write_reg(chan, sh7780_pci_map.window0.size - 0xfffff, SH4_PCILSR0);
125 pci_write_reg(map->window1.size - 0xfffff, SH4_PCILSR1);
126 /* Set the values on window 0 PCI config registers */ 109 /* Set the values on window 0 PCI config registers */
127 pci_write_reg(map->window0.base, SH4_PCILAR0); 110 pci_write_reg(chan, sh7780_pci_map.window0.base, SH4_PCILAR0);
128 pci_write_reg(map->window0.base, SH7780_PCIMBAR0); 111 pci_write_reg(chan, sh7780_pci_map.window0.base, SH7780_PCIMBAR0);
129 /* Set the values on window 1 PCI config registers */
130 pci_write_reg(map->window1.base, SH4_PCILAR1);
131 pci_write_reg(map->window1.base, SH7780_PCIMBAR1);
132
133 /* Map IO space into PCI IO window
134 * The IO window is 64K-PCIBIOS_MIN_IO in size
135 * IO addresses will be translated to the
136 * PCI IO window base address
137 */
138 pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n",
139 PCIBIOS_MIN_IO, (64 << 10),
140 SH7780_PCI_IO_BASE + PCIBIOS_MIN_IO);
141 112
142 /* NOTE: I'm ignoring the PCI error IRQs for now.. 113 pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM);
143 * TODO: add support for the internal error interrupts and 114
144 * DMA interrupts... 115 /* Set up standard PCI config registers */
145 */ 116 __raw_writew(0xFB00, chan->reg_base + SH7780_PCISTATUS);
117 __raw_writew(0x0047, chan->reg_base + SH7780_PCICMD);
118 __raw_writew(0x1912, chan->reg_base + SH7780_PCISVID);
119 __raw_writew(0x0001, chan->reg_base + SH7780_PCISID);
120
121 __raw_writeb(0x00, chan->reg_base + SH7780_PCIPIF);
146 122
147 /* Apply any last-minute PCIC fixups */ 123 /* Apply any last-minute PCIC fixups */
148 pci_fixup_pcic(); 124 pci_fixup_pcic(chan);
125
126 pci_write_reg(chan, 0xfd000000, SH7780_PCIMBR0);
127 pci_write_reg(chan, 0x00fc0000, SH7780_PCIMBMR0);
128
129#ifdef CONFIG_32BIT
130 pci_write_reg(chan, 0xc0000000, SH7780_PCIMBR2);
131 pci_write_reg(chan, 0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
132#endif
133
134 /* Set IOBR for windows containing area specified in pci.h */
135 pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1),
136 SH7780_PCIIOBR);
137 pci_write_reg(chan, ((SH7780_PCI_IO_SIZE-1) & (7<<18)),
138 SH7780_PCIIOBMR);
149 139
150 /* SH7780 init done, set central function init complete */ 140 /* SH7780 init done, set central function init complete */
151 /* use round robin mode to stop a device starving/overruning */ 141 /* use round robin mode to stop a device starving/overruning */
152 word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO; 142 word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO;
153 pci_write_reg(word, SH4_PCICR); 143 pci_write_reg(chan, word, SH4_PCICR);
144
145 __set_io_port_base(SH7780_PCI_IO_BASE);
146
147 register_pci_controller(chan);
154 148
155 return 1; 149 return 0;
156} 150}
151arch_initcall(sh7780_pci_init);
diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h
index 93adc7119b79..4a52478c97cf 100644
--- a/arch/sh/drivers/pci/pci-sh7780.h
+++ b/arch/sh/drivers/pci/pci-sh7780.h
@@ -20,9 +20,8 @@
20#define SH7785_DEVICE_ID 0x0007 20#define SH7785_DEVICE_ID 0x0007
21 21
22/* SH7780 Control Registers */ 22/* SH7780 Control Registers */
23#define SH7780_PCI_VCR0 0xFE000000 23#define PCIECR 0xFE000008
24#define SH7780_PCI_VCR1 0xFE000004 24#define PCIECR_ENBL 0x01
25#define SH7780_PCI_VCR2 0xFE000008
26 25
27/* SH7780 Specific Values */ 26/* SH7780 Specific Values */
28#define SH7780_PCI_CONFIG_BASE 0xFD000000 /* Config space base addr */ 27#define SH7780_PCI_CONFIG_BASE 0xFD000000 /* Config space base addr */
@@ -35,7 +34,6 @@
35#define SH7780_PCI_IO_SIZE 0x00400000 /* Size of IO window */ 34#define SH7780_PCI_IO_SIZE 0x00400000 /* Size of IO window */
36 35
37#define SH7780_PCIREG_BASE 0xFE040000 /* PCI regs base address */ 36#define SH7780_PCIREG_BASE 0xFE040000 /* PCI regs base address */
38#define PCI_REG(n) (SH7780_PCIREG_BASE+n)
39 37
40/* SH7780 PCI Config Registers */ 38/* SH7780 PCI Config Registers */
41#define SH7780_PCIVID 0x000 /* Vendor ID */ 39#define SH7780_PCIVID 0x000 /* Vendor ID */
@@ -67,11 +65,6 @@
67#define SH7780_PCIPMCSR_BSE 0x046 65#define SH7780_PCIPMCSR_BSE 0x046
68#define SH7780_PCICDD 0x047 66#define SH7780_PCICDD 0x047
69 67
70#define SH7780_PCICR 0x100 /* PCI Control Register */
71#define SH7780_PCILSR 0x104 /* PCI Local Space Register0 */
72#define SH7780_PCILSR1 0x108 /* PCI Local Space Register1 */
73#define SH7780_PCILAR0 0x10C /* PCI Local Address Register1 */
74#define SH7780_PCILAR1 0x110 /* PCI Local Address Register1 */
75#define SH7780_PCIIR 0x114 /* PCI Interrupt Register */ 68#define SH7780_PCIIR 0x114 /* PCI Interrupt Register */
76#define SH7780_PCIIMR 0x118 /* PCI Interrupt Mask Register */ 69#define SH7780_PCIIMR 0x118 /* PCI Interrupt Mask Register */
77#define SH7780_PCIAIR 0x11C /* Error Address Register */ 70#define SH7780_PCIAIR 0x11C /* Error Address Register */
@@ -106,9 +99,4 @@
106 99
107#define SH7780_32BIT_DDR_BASE_ADDR 0x40000000 100#define SH7780_32BIT_DDR_BASE_ADDR 0x40000000
108 101
109struct sh4_pci_address_map;
110
111/* arch/sh/drivers/pci/pci-sh7780.c */
112int sh7780_pcic_init(struct sh4_pci_address_map *map);
113
114#endif /* _PCI_SH7780_H_ */ 102#endif /* _PCI_SH7780_H_ */
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index 0d6ac7a1db49..54d77cbb8b39 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -1,67 +1,156 @@
1/* 1/*
2 * arch/sh/drivers/pci/pci.c 2 * New-style PCI core.
3 * 3 *
4 * Copyright (c) 2002 M. R. Brown <mrbrown@linux-sh.org> 4 * Copyright (c) 2004 - 2009 Paul Mundt
5 * Copyright (c) 2004 - 2006 Paul Mundt <lethal@linux-sh.org> 5 * Copyright (c) 2002 M. R. Brown
6 * 6 *
7 * These functions are collected here to reduce duplication of common 7 * Modelled after arch/mips/pci/pci.c:
8 * code amongst the many platform-specific PCI support code files. 8 * Copyright (C) 2003, 04 Ralf Baechle (ralf@linux-mips.org)
9 *
10 * These routines require the following board-specific routines:
11 * void pcibios_fixup_irqs();
12 *
13 * See include/asm-sh/pci.h for more information.
14 * 9 *
15 * This file is subject to the terms and conditions of the GNU General Public 10 * This file is subject to the terms and conditions of the GNU General Public
16 * License. See the file "COPYING" in the main directory of this archive 11 * License. See the file "COPYING" in the main directory of this archive
17 * for more details. 12 * for more details.
18 */ 13 */
19#include <linux/kernel.h> 14#include <linux/kernel.h>
15#include <linux/mm.h>
20#include <linux/pci.h> 16#include <linux/pci.h>
21#include <linux/init.h> 17#include <linux/init.h>
18#include <linux/types.h>
22#include <linux/dma-debug.h> 19#include <linux/dma-debug.h>
23#include <asm/io.h> 20#include <linux/io.h>
21#include <linux/mutex.h>
24 22
25static int __init pcibios_init(void) 23unsigned long PCIBIOS_MIN_IO = 0x0000;
24unsigned long PCIBIOS_MIN_MEM = 0;
25
26/*
27 * The PCI controller list.
28 */
29static struct pci_channel *hose_head, **hose_tail = &hose_head;
30
31static int pci_initialized;
32
33static void __devinit pcibios_scanbus(struct pci_channel *hose)
26{ 34{
27 struct pci_channel *p; 35 static int next_busno;
28 struct pci_bus *bus; 36 struct pci_bus *bus;
29 int busno;
30 37
31#ifdef CONFIG_PCI_AUTO 38 bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
32 /* assign resources */ 39 if (bus) {
33 busno = 0; 40 next_busno = bus->subordinate + 1;
34 for (p = board_pci_channels; p->pci_ops != NULL; p++) 41 /* Don't allow 8-bit bus number overflow inside the hose -
35 busno = pciauto_assign_resources(busno, p) + 1; 42 reserve some space for bridges. */
36#endif 43 if (next_busno > 224)
44 next_busno = 0;
45
46 pci_bus_size_bridges(bus);
47 pci_bus_assign_resources(bus);
48 pci_enable_bridges(bus);
49 }
50}
51
52static DEFINE_MUTEX(pci_scan_mutex);
37 53
38 /* scan the buses */ 54void __devinit register_pci_controller(struct pci_channel *hose)
39 busno = 0; 55{
40 for (p = board_pci_channels; p->pci_ops != NULL; p++) { 56 if (request_resource(&iomem_resource, hose->mem_resource) < 0)
41 bus = pci_scan_bus(busno, p->pci_ops, p); 57 goto out;
42 busno = bus->subordinate + 1; 58 if (request_resource(&ioport_resource, hose->io_resource) < 0) {
59 release_resource(hose->mem_resource);
60 goto out;
43 } 61 }
44 62
63 *hose_tail = hose;
64 hose_tail = &hose->next;
65
66 /*
67 * Do not panic here but later - this might hapen before console init.
68 */
69 if (!hose->io_map_base) {
70 printk(KERN_WARNING
71 "registering PCI controller with io_map_base unset\n");
72 }
73
74 /*
75 * Scan the bus if it is register after the PCI subsystem
76 * initialization.
77 */
78 if (pci_initialized) {
79 mutex_lock(&pci_scan_mutex);
80 pcibios_scanbus(hose);
81 mutex_unlock(&pci_scan_mutex);
82 }
83
84 return;
85
86out:
87 printk(KERN_WARNING
88 "Skipping PCI bus scan due to resource conflict\n");
89}
90
91static int __init pcibios_init(void)
92{
93 struct pci_channel *hose;
94
95 /* Scan all of the recorded PCI controllers. */
96 for (hose = hose_head; hose; hose = hose->next)
97 pcibios_scanbus(hose);
98
45 pci_fixup_irqs(pci_common_swizzle, pcibios_map_platform_irq); 99 pci_fixup_irqs(pci_common_swizzle, pcibios_map_platform_irq);
46 100
47 dma_debug_add_bus(&pci_bus_type); 101 dma_debug_add_bus(&pci_bus_type);
48 102
103 pci_initialized = 1;
104
49 return 0; 105 return 0;
50} 106}
51subsys_initcall(pcibios_init); 107subsys_initcall(pcibios_init);
52 108
109static void pcibios_fixup_device_resources(struct pci_dev *dev,
110 struct pci_bus *bus)
111{
112 /* Update device resources. */
113 struct pci_channel *hose = bus->sysdata;
114 unsigned long offset = 0;
115 int i;
116
117 for (i = 0; i < PCI_NUM_RESOURCES; i++) {
118 if (!dev->resource[i].start)
119 continue;
120 if (dev->resource[i].flags & IORESOURCE_PCI_FIXED)
121 continue;
122 if (dev->resource[i].flags & IORESOURCE_IO)
123 offset = hose->io_offset;
124 else if (dev->resource[i].flags & IORESOURCE_MEM)
125 offset = hose->mem_offset;
126
127 dev->resource[i].start += offset;
128 dev->resource[i].end += offset;
129 }
130}
131
53/* 132/*
54 * Called after each bus is probed, but before its children 133 * Called after each bus is probed, but before its children
55 * are examined. 134 * are examined.
56 */ 135 */
57void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus) 136void __devinit pcibios_fixup_bus(struct pci_bus *bus)
58{ 137{
59 pci_read_bridge_bases(bus); 138 struct pci_dev *dev = bus->self;
60} 139 struct list_head *ln;
140 struct pci_channel *chan = bus->sysdata;
61 141
62void pcibios_align_resource(void *data, struct resource *res, 142 if (!dev) {
63 resource_size_t size, resource_size_t align) 143 bus->resource[0] = chan->io_resource;
64 __attribute__ ((weak)); 144 bus->resource[1] = chan->mem_resource;
145 }
146
147 for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
148 dev = pci_dev_b(ln);
149
150 if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
151 pcibios_fixup_device_resources(dev, bus);
152 }
153}
65 154
66/* 155/*
67 * We need to avoid collisions with `mirrored' VGA ports 156 * We need to avoid collisions with `mirrored' VGA ports
@@ -72,14 +161,58 @@ void pcibios_align_resource(void *data, struct resource *res,
72void pcibios_align_resource(void *data, struct resource *res, 161void pcibios_align_resource(void *data, struct resource *res,
73 resource_size_t size, resource_size_t align) 162 resource_size_t size, resource_size_t align)
74{ 163{
164 struct pci_dev *dev = data;
165 struct pci_channel *chan = dev->sysdata;
166 resource_size_t start = res->start;
167
75 if (res->flags & IORESOURCE_IO) { 168 if (res->flags & IORESOURCE_IO) {
76 resource_size_t start = res->start; 169 if (start < PCIBIOS_MIN_IO + chan->io_resource->start)
170 start = PCIBIOS_MIN_IO + chan->io_resource->start;
77 171
172 /*
173 * Put everything into 0x00-0xff region modulo 0x400.
174 */
78 if (start & 0x300) { 175 if (start & 0x300) {
79 start = (start + 0x3ff) & ~0x3ff; 176 start = (start + 0x3ff) & ~0x3ff;
80 res->start = start; 177 res->start = start;
81 } 178 }
179 } else if (res->flags & IORESOURCE_MEM) {
180 if (start < PCIBIOS_MIN_MEM + chan->mem_resource->start)
181 start = PCIBIOS_MIN_MEM + chan->mem_resource->start;
82 } 182 }
183
184 res->start = start;
185}
186
187void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
188 struct resource *res)
189{
190 struct pci_channel *hose = dev->sysdata;
191 unsigned long offset = 0;
192
193 if (res->flags & IORESOURCE_IO)
194 offset = hose->io_offset;
195 else if (res->flags & IORESOURCE_MEM)
196 offset = hose->mem_offset;
197
198 region->start = res->start - offset;
199 region->end = res->end - offset;
200}
201
202void __devinit
203pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
204 struct pci_bus_region *region)
205{
206 struct pci_channel *hose = dev->sysdata;
207 unsigned long offset = 0;
208
209 if (res->flags & IORESOURCE_IO)
210 offset = hose->io_offset;
211 else if (res->flags & IORESOURCE_MEM)
212 offset = hose->mem_offset;
213
214 res->start = region->start + offset;
215 res->end = region->end + offset;
83} 216}
84 217
85int pcibios_enable_device(struct pci_dev *dev, int mask) 218int pcibios_enable_device(struct pci_dev *dev, int mask)
@@ -90,13 +223,21 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
90 223
91 pci_read_config_word(dev, PCI_COMMAND, &cmd); 224 pci_read_config_word(dev, PCI_COMMAND, &cmd);
92 old_cmd = cmd; 225 old_cmd = cmd;
93 for(idx=0; idx<6; idx++) { 226 for (idx=0; idx < PCI_NUM_RESOURCES; idx++) {
94 if (!(mask & (1 << idx))) 227 /* Only set up the requested stuff */
228 if (!(mask & (1<<idx)))
95 continue; 229 continue;
230
96 r = &dev->resource[idx]; 231 r = &dev->resource[idx];
232 if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
233 continue;
234 if ((idx == PCI_ROM_RESOURCE) &&
235 (!(r->flags & IORESOURCE_ROM_ENABLE)))
236 continue;
97 if (!r->start && r->end) { 237 if (!r->start && r->end) {
98 printk(KERN_ERR "PCI: Device %s not available because " 238 printk(KERN_ERR "PCI: Device %s not available "
99 "of resource collisions\n", pci_name(dev)); 239 "because of resource collisions\n",
240 pci_name(dev));
100 return -EINVAL; 241 return -EINVAL;
101 } 242 }
102 if (r->flags & IORESOURCE_IO) 243 if (r->flags & IORESOURCE_IO)
@@ -104,10 +245,8 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
104 if (r->flags & IORESOURCE_MEM) 245 if (r->flags & IORESOURCE_MEM)
105 cmd |= PCI_COMMAND_MEMORY; 246 cmd |= PCI_COMMAND_MEMORY;
106 } 247 }
107 if (dev->resource[PCI_ROM_RESOURCE].start)
108 cmd |= PCI_COMMAND_MEMORY;
109 if (cmd != old_cmd) { 248 if (cmd != old_cmd) {
110 printk(KERN_INFO "PCI: Enabling device %s (%04x -> %04x)\n", 249 printk("PCI: Enabling device %s (%04x -> %04x)\n",
111 pci_name(dev), old_cmd, cmd); 250 pci_name(dev), old_cmd, cmd);
112 pci_write_config_word(dev, PCI_COMMAND, cmd); 251 pci_write_config_word(dev, PCI_COMMAND, cmd);
113 } 252 }
@@ -140,6 +279,43 @@ void __init pcibios_update_irq(struct pci_dev *dev, int irq)
140 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); 279 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
141} 280}
142 281
282char * __devinit pcibios_setup(char *str)
283{
284 return str;
285}
286
287int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
288 enum pci_mmap_state mmap_state, int write_combine)
289{
290 /*
291 * I/O space can be accessed via normal processor loads and stores on
292 * this platform but for now we elect not to do this and portable
293 * drivers should not do this anyway.
294 */
295 if (mmap_state == pci_mmap_io)
296 return -EINVAL;
297
298 /*
299 * Ignore write-combine; for now only return uncached mappings.
300 */
301 vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
302
303 return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
304 vma->vm_end - vma->vm_start,
305 vma->vm_page_prot);
306}
307
308static void __iomem *ioport_map_pci(struct pci_dev *dev,
309 unsigned long port, unsigned int nr)
310{
311 struct pci_channel *chan = dev->sysdata;
312
313 if (!chan->io_map_base)
314 chan->io_map_base = generic_io_base;
315
316 return (void __iomem *)(chan->io_map_base + port);
317}
318
143void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) 319void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
144{ 320{
145 resource_size_t start = pci_resource_start(dev, bar); 321 resource_size_t start = pci_resource_start(dev, bar);
@@ -151,20 +327,24 @@ void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
151 if (maxlen && len > maxlen) 327 if (maxlen && len > maxlen)
152 len = maxlen; 328 len = maxlen;
153 329
330 if (flags & IORESOURCE_IO)
331 return ioport_map_pci(dev, start, len);
332
154 /* 333 /*
155 * Presently the IORESOURCE_MEM case is a bit special, most 334 * Presently the IORESOURCE_MEM case is a bit special, most
156 * SH7751 style PCI controllers have PCI memory at a fixed 335 * SH7751 style PCI controllers have PCI memory at a fixed
157 * location in the address space where no remapping is desired 336 * location in the address space where no remapping is desired.
158 * (typically at 0xfd000000, but is_pci_memaddr() will know 337 * With the IORESOURCE_MEM case more care has to be taken
159 * best). With the IORESOURCE_MEM case more care has to be taken
160 * to inhibit page table mapping for legacy cores, but this is 338 * to inhibit page table mapping for legacy cores, but this is
161 * punted off to __ioremap(). 339 * punted off to __ioremap().
162 * -- PFM. 340 * -- PFM.
163 */ 341 */
164 if (flags & IORESOURCE_IO) 342 if (flags & IORESOURCE_MEM) {
165 return ioport_map(start, len); 343 if (flags & IORESOURCE_CACHEABLE)
166 if (flags & IORESOURCE_MEM) 344 return ioremap(start, len);
167 return ioremap(start, len); 345
346 return ioremap_nocache(start, len);
347 }
168 348
169 return NULL; 349 return NULL;
170} 350}
@@ -175,3 +355,10 @@ void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
175 iounmap(addr); 355 iounmap(addr);
176} 356}
177EXPORT_SYMBOL(pci_iounmap); 357EXPORT_SYMBOL(pci_iounmap);
358
359#ifdef CONFIG_HOTPLUG
360EXPORT_SYMBOL(pcibios_resource_to_bus);
361EXPORT_SYMBOL(pcibios_bus_to_resource);
362EXPORT_SYMBOL(PCIBIOS_MIN_IO);
363EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
364#endif
generated by cgit v1.2.2 (git 2.25.0) at 2024-09-24 19:28:13 -0400