aboutsummaryrefslogtreecommitdiffstats
path: root/arch/ppc
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc')
-rw-r--r--arch/ppc/platforms/4xx/bamboo.c427
-rw-r--r--arch/ppc/platforms/4xx/bamboo.h136
2 files changed, 563 insertions, 0 deletions
diff --git a/arch/ppc/platforms/4xx/bamboo.c b/arch/ppc/platforms/4xx/bamboo.c
new file mode 100644
index 000000000000..f116787b0b76
--- /dev/null
+++ b/arch/ppc/platforms/4xx/bamboo.c
@@ -0,0 +1,427 @@
1/*
2 * arch/ppc/platforms/4xx/bamboo.c
3 *
4 * Bamboo board specific routines
5 *
6 * Wade Farnsworth <wfarnsworth@mvista.com>
7 * Copyright 2004 MontaVista Software Inc.
8 *
9 * This program is free software; you can redistribute it and/or modify it
10 * under the terms of the GNU General Public License as published by the
11 * Free Software Foundation; either version 2 of the License, or (at your
12 * option) any later version.
13 */
14
15#include <linux/config.h>
16#include <linux/stddef.h>
17#include <linux/kernel.h>
18#include <linux/init.h>
19#include <linux/errno.h>
20#include <linux/reboot.h>
21#include <linux/pci.h>
22#include <linux/kdev_t.h>
23#include <linux/types.h>
24#include <linux/major.h>
25#include <linux/blkdev.h>
26#include <linux/console.h>
27#include <linux/delay.h>
28#include <linux/ide.h>
29#include <linux/initrd.h>
30#include <linux/irq.h>
31#include <linux/seq_file.h>
32#include <linux/root_dev.h>
33#include <linux/tty.h>
34#include <linux/serial.h>
35#include <linux/serial_core.h>
36#include <linux/ethtool.h>
37
38#include <asm/system.h>
39#include <asm/pgtable.h>
40#include <asm/page.h>
41#include <asm/dma.h>
42#include <asm/io.h>
43#include <asm/machdep.h>
44#include <asm/ocp.h>
45#include <asm/pci-bridge.h>
46#include <asm/time.h>
47#include <asm/todc.h>
48#include <asm/bootinfo.h>
49#include <asm/ppc4xx_pic.h>
50#include <asm/ppcboot.h>
51
52#include <syslib/gen550.h>
53#include <syslib/ibm440gx_common.h>
54
55/*
56 * This is a horrible kludge, we eventually need to abstract this
57 * generic PHY stuff, so the standard phy mode defines can be
58 * easily used from arch code.
59 */
60#include "../../../../drivers/net/ibm_emac/ibm_emac_phy.h"
61
62bd_t __res;
63
64static struct ibm44x_clocks clocks __initdata;
65
66/*
67 * Bamboo external IRQ triggering/polarity settings
68 */
69unsigned char ppc4xx_uic_ext_irq_cfg[] __initdata = {
70 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ0: Ethernet transceiver */
71 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* IRQ1: Expansion connector */
72 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ2: PCI slot 0 */
73 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ3: PCI slot 1 */
74 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ4: PCI slot 2 */
75 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ5: PCI slot 3 */
76 (IRQ_SENSE_EDGE | IRQ_POLARITY_NEGATIVE), /* IRQ6: SMI pushbutton */
77 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ7: EXT */
78 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ8: EXT */
79 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ9: EXT */
80};
81
82static void __init
83bamboo_calibrate_decr(void)
84{
85 unsigned int freq;
86
87 if (mfspr(SPRN_CCR1) & CCR1_TCS)
88 freq = BAMBOO_TMRCLK;
89 else
90 freq = clocks.cpu;
91
92 ibm44x_calibrate_decr(freq);
93
94}
95
96static int
97bamboo_show_cpuinfo(struct seq_file *m)
98{
99 seq_printf(m, "vendor\t\t: IBM\n");
100 seq_printf(m, "machine\t\t: PPC440EP EVB (Bamboo)\n");
101
102 return 0;
103}
104
105static inline int
106bamboo_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
107{
108 static char pci_irq_table[][4] =
109 /*
110 * PCI IDSEL/INTPIN->INTLINE
111 * A B C D
112 */
113 {
114 { 28, 28, 28, 28 }, /* IDSEL 1 - PCI Slot 0 */
115 { 27, 27, 27, 27 }, /* IDSEL 2 - PCI Slot 1 */
116 { 26, 26, 26, 26 }, /* IDSEL 3 - PCI Slot 2 */
117 { 25, 25, 25, 25 }, /* IDSEL 4 - PCI Slot 3 */
118 };
119
120 const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
121 return PCI_IRQ_TABLE_LOOKUP;
122}
123
124static void __init bamboo_set_emacdata(void)
125{
126 unsigned char * selection1_base;
127 struct ocp_def *def;
128 struct ocp_func_emac_data *emacdata;
129 u8 selection1_val;
130 int mode;
131
132 selection1_base = ioremap64(BAMBOO_FPGA_SELECTION1_REG_ADDR, 16);
133 selection1_val = readb(selection1_base);
134 iounmap((void *) selection1_base);
135 if (BAMBOO_SEL_MII(selection1_val))
136 mode = PHY_MODE_MII;
137 else if (BAMBOO_SEL_RMII(selection1_val))
138 mode = PHY_MODE_RMII;
139 else
140 mode = PHY_MODE_SMII;
141
142 /* Set mac_addr and phy mode for each EMAC */
143
144 def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0);
145 emacdata = def->additions;
146 memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
147 emacdata->phy_mode = mode;
148
149 def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 1);
150 emacdata = def->additions;
151 memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6);
152 emacdata->phy_mode = mode;
153}
154
155static int
156bamboo_exclude_device(unsigned char bus, unsigned char devfn)
157{
158 return (bus == 0 && devfn == 0);
159}
160
161#define PCI_READW(offset) \
162 (readw((void *)((u32)pci_reg_base+offset)))
163
164#define PCI_WRITEW(value, offset) \
165 (writew(value, (void *)((u32)pci_reg_base+offset)))
166
167#define PCI_WRITEL(value, offset) \
168 (writel(value, (void *)((u32)pci_reg_base+offset)))
169
170static void __init
171bamboo_setup_pci(void)
172{
173 void *pci_reg_base;
174 unsigned long memory_size;
175 memory_size = ppc_md.find_end_of_memory();
176
177 pci_reg_base = ioremap64(BAMBOO_PCIL0_BASE, BAMBOO_PCIL0_SIZE);
178
179 /* Enable PCI I/O, Mem, and Busmaster cycles */
180 PCI_WRITEW(PCI_READW(PCI_COMMAND) |
181 PCI_COMMAND_MEMORY |
182 PCI_COMMAND_MASTER, PCI_COMMAND);
183
184 /* Disable region first */
185 PCI_WRITEL(0, BAMBOO_PCIL0_PMM0MA);
186
187 /* PLB starting addr: 0x00000000A0000000 */
188 PCI_WRITEL(BAMBOO_PCI_PHY_MEM_BASE, BAMBOO_PCIL0_PMM0LA);
189
190 /* PCI start addr, 0xA0000000 (PCI Address) */
191 PCI_WRITEL(BAMBOO_PCI_MEM_BASE, BAMBOO_PCIL0_PMM0PCILA);
192 PCI_WRITEL(0, BAMBOO_PCIL0_PMM0PCIHA);
193
194 /* Enable no pre-fetch, enable region */
195 PCI_WRITEL(((0xffffffff -
196 (BAMBOO_PCI_UPPER_MEM - BAMBOO_PCI_MEM_BASE)) | 0x01),
197 BAMBOO_PCIL0_PMM0MA);
198
199 /* Disable region one */
200 PCI_WRITEL(0, BAMBOO_PCIL0_PMM1MA);
201 PCI_WRITEL(0, BAMBOO_PCIL0_PMM1LA);
202 PCI_WRITEL(0, BAMBOO_PCIL0_PMM1PCILA);
203 PCI_WRITEL(0, BAMBOO_PCIL0_PMM1PCIHA);
204 PCI_WRITEL(0, BAMBOO_PCIL0_PMM1MA);
205
206 /* Disable region two */
207 PCI_WRITEL(0, BAMBOO_PCIL0_PMM2MA);
208 PCI_WRITEL(0, BAMBOO_PCIL0_PMM2LA);
209 PCI_WRITEL(0, BAMBOO_PCIL0_PMM2PCILA);
210 PCI_WRITEL(0, BAMBOO_PCIL0_PMM2PCIHA);
211 PCI_WRITEL(0, BAMBOO_PCIL0_PMM2MA);
212
213 /* Now configure the PCI->PLB windows, we only use PTM1
214 *
215 * For Inbound flow, set the window size to all available memory
216 * This is required because if size is smaller,
217 * then Eth/PCI DD would fail as PCI card not able to access
218 * the memory allocated by DD.
219 */
220
221 PCI_WRITEL(0, BAMBOO_PCIL0_PTM1MS); /* disabled region 1 */
222 PCI_WRITEL(0, BAMBOO_PCIL0_PTM1LA); /* begin of address map */
223
224 memory_size = 1 << fls(memory_size - 1);
225
226 /* Size low + Enabled */
227 PCI_WRITEL((0xffffffff - (memory_size - 1)) | 0x1, BAMBOO_PCIL0_PTM1MS);
228
229 eieio();
230 iounmap(pci_reg_base);
231}
232
233static void __init
234bamboo_setup_hose(void)
235{
236 unsigned int bar_response, bar;
237 struct pci_controller *hose;
238
239 bamboo_setup_pci();
240
241 hose = pcibios_alloc_controller();
242
243 if (!hose)
244 return;
245
246 hose->first_busno = 0;
247 hose->last_busno = 0xff;
248
249 hose->pci_mem_offset = BAMBOO_PCI_MEM_OFFSET;
250
251 pci_init_resource(&hose->io_resource,
252 BAMBOO_PCI_LOWER_IO,
253 BAMBOO_PCI_UPPER_IO,
254 IORESOURCE_IO,
255 "PCI host bridge");
256
257 pci_init_resource(&hose->mem_resources[0],
258 BAMBOO_PCI_LOWER_MEM,
259 BAMBOO_PCI_UPPER_MEM,
260 IORESOURCE_MEM,
261 "PCI host bridge");
262
263 ppc_md.pci_exclude_device = bamboo_exclude_device;
264
265 hose->io_space.start = BAMBOO_PCI_LOWER_IO;
266 hose->io_space.end = BAMBOO_PCI_UPPER_IO;
267 hose->mem_space.start = BAMBOO_PCI_LOWER_MEM;
268 hose->mem_space.end = BAMBOO_PCI_UPPER_MEM;
269 isa_io_base =
270 (unsigned long)ioremap64(BAMBOO_PCI_IO_BASE, BAMBOO_PCI_IO_SIZE);
271 hose->io_base_virt = (void *)isa_io_base;
272
273 setup_indirect_pci(hose,
274 BAMBOO_PCI_CFGA_PLB32,
275 BAMBOO_PCI_CFGD_PLB32);
276 hose->set_cfg_type = 1;
277
278 /* Zero config bars */
279 for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
280 early_write_config_dword(hose, hose->first_busno,
281 PCI_FUNC(hose->first_busno), bar,
282 0x00000000);
283 early_read_config_dword(hose, hose->first_busno,
284 PCI_FUNC(hose->first_busno), bar,
285 &bar_response);
286 }
287
288 hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
289
290 ppc_md.pci_swizzle = common_swizzle;
291 ppc_md.pci_map_irq = bamboo_map_irq;
292}
293
294TODC_ALLOC();
295
296static void __init
297bamboo_early_serial_map(void)
298{
299 struct uart_port port;
300
301 /* Setup ioremapped serial port access */
302 memset(&port, 0, sizeof(port));
303 port.membase = ioremap64(PPC440EP_UART0_ADDR, 8);
304 port.irq = 0;
305 port.uartclk = clocks.uart0;
306 port.regshift = 0;
307 port.iotype = SERIAL_IO_MEM;
308 port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
309 port.line = 0;
310
311 if (early_serial_setup(&port) != 0) {
312 printk("Early serial init of port 0 failed\n");
313 }
314
315#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
316 /* Configure debug serial access */
317 gen550_init(0, &port);
318#endif
319
320 port.membase = ioremap64(PPC440EP_UART1_ADDR, 8);
321 port.irq = 1;
322 port.uartclk = clocks.uart1;
323 port.line = 1;
324
325 if (early_serial_setup(&port) != 0) {
326 printk("Early serial init of port 1 failed\n");
327 }
328
329#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
330 /* Configure debug serial access */
331 gen550_init(1, &port);
332#endif
333
334 port.membase = ioremap64(PPC440EP_UART2_ADDR, 8);
335 port.irq = 3;
336 port.uartclk = clocks.uart2;
337 port.line = 2;
338
339 if (early_serial_setup(&port) != 0) {
340 printk("Early serial init of port 2 failed\n");
341 }
342
343#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
344 /* Configure debug serial access */
345 gen550_init(2, &port);
346#endif
347
348 port.membase = ioremap64(PPC440EP_UART3_ADDR, 8);
349 port.irq = 4;
350 port.uartclk = clocks.uart3;
351 port.line = 3;
352
353 if (early_serial_setup(&port) != 0) {
354 printk("Early serial init of port 3 failed\n");
355 }
356}
357
358static void __init
359bamboo_setup_arch(void)
360{
361
362 bamboo_set_emacdata();
363
364 ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
365 ocp_sys_info.opb_bus_freq = clocks.opb;
366
367 /* Setup TODC access */
368 TODC_INIT(TODC_TYPE_DS1743,
369 0,
370 0,
371 ioremap64(BAMBOO_RTC_ADDR, BAMBOO_RTC_SIZE),
372 8);
373
374 /* init to some ~sane value until calibrate_delay() runs */
375 loops_per_jiffy = 50000000/HZ;
376
377 /* Setup PCI host bridge */
378 bamboo_setup_hose();
379
380#ifdef CONFIG_BLK_DEV_INITRD
381 if (initrd_start)
382 ROOT_DEV = Root_RAM0;
383 else
384#endif
385#ifdef CONFIG_ROOT_NFS
386 ROOT_DEV = Root_NFS;
387#else
388 ROOT_DEV = Root_HDA1;
389#endif
390
391 bamboo_early_serial_map();
392
393 /* Identify the system */
394 printk("IBM Bamboo port (MontaVista Software, Inc. (source@mvista.com))\n");
395}
396
397void __init platform_init(unsigned long r3, unsigned long r4,
398 unsigned long r5, unsigned long r6, unsigned long r7)
399{
400 parse_bootinfo(find_bootinfo());
401
402 /*
403 * If we were passed in a board information, copy it into the
404 * residual data area.
405 */
406 if (r3)
407 __res = *(bd_t *)(r3 + KERNELBASE);
408
409
410 ibm44x_platform_init();
411
412 ppc_md.setup_arch = bamboo_setup_arch;
413 ppc_md.show_cpuinfo = bamboo_show_cpuinfo;
414 ppc_md.get_irq = NULL; /* Set in ppc4xx_pic_init() */
415
416 ppc_md.calibrate_decr = bamboo_calibrate_decr;
417 ppc_md.time_init = todc_time_init;
418 ppc_md.set_rtc_time = todc_set_rtc_time;
419 ppc_md.get_rtc_time = todc_get_rtc_time;
420
421 ppc_md.nvram_read_val = todc_direct_read_val;
422 ppc_md.nvram_write_val = todc_direct_write_val;
423#ifdef CONFIG_KGDB
424 ppc_md.early_serial_map = bamboo_early_serial_map;
425#endif
426}
427
diff --git a/arch/ppc/platforms/4xx/bamboo.h b/arch/ppc/platforms/4xx/bamboo.h
new file mode 100644
index 000000000000..63d714504148
--- /dev/null
+++ b/arch/ppc/platforms/4xx/bamboo.h
@@ -0,0 +1,136 @@
1/*
2 * arch/ppc/platforms/bamboo.h
3 *
4 * Bamboo board definitions
5 *
6 * Wade Farnsworth <wfarnsworth@mvista.com>
7 *
8 * Copyright 2004 MontaVista Software Inc.
9 *
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by the
12 * Free Software Foundation; either version 2 of the License, or (at your
13 * option) any later version.
14 */
15
16#ifdef __KERNEL__
17#ifndef __ASM_BAMBOO_H__
18#define __ASM_BAMBOO_H__
19
20#include <linux/config.h>
21#include <platforms/4xx/ibm440ep.h>
22
23/* F/W TLB mapping used in bootloader glue to reset EMAC */
24#define PPC44x_EMAC0_MR0 0x0EF600E00
25
26/* Location of MAC addresses in PIBS image */
27#define PIBS_FLASH_BASE 0xfff00000
28#define PIBS_MAC_BASE (PIBS_FLASH_BASE+0xc0400)
29#define PIBS_MAC_SIZE 0x200
30#define PIBS_MAC_OFFSET 0x100
31
32/* Default clock rate */
33#define BAMBOO_TMRCLK 25000000
34
35/* RTC/NVRAM location */
36#define BAMBOO_RTC_ADDR 0x080000000ULL
37#define BAMBOO_RTC_SIZE 0x2000
38
39/* FPGA Registers */
40#define BAMBOO_FPGA_ADDR 0x080002000ULL
41
42#define BAMBOO_FPGA_CONFIG2_REG_ADDR (BAMBOO_FPGA_ADDR + 0x1)
43#define BAMBOO_FULL_DUPLEX_EN(x) (x & 0x08)
44#define BAMBOO_FORCE_100Mbps(x) (x & 0x04)
45#define BAMBOO_AUTONEGOTIATE(x) (x & 0x02)
46
47#define BAMBOO_FPGA_SETTING_REG_ADDR (BAMBOO_FPGA_ADDR + 0x3)
48#define BAMBOO_BOOT_SMALL_FLASH(x) (!(x & 0x80))
49#define BAMBOO_LARGE_FLASH_EN(x) (!(x & 0x40))
50#define BAMBOO_BOOT_NAND_FLASH(x) (!(x & 0x20))
51
52#define BAMBOO_FPGA_SELECTION1_REG_ADDR (BAMBOO_FPGA_ADDR + 0x4)
53#define BAMBOO_SEL_MII(x) (x & 0x80)
54#define BAMBOO_SEL_RMII(x) (x & 0x40)
55#define BAMBOO_SEL_SMII(x) (x & 0x20)
56
57/* Flash */
58#define BAMBOO_SMALL_FLASH_LOW 0x087f00000ULL
59#define BAMBOO_SMALL_FLASH_HIGH 0x0fff00000ULL
60#define BAMBOO_SMALL_FLASH_SIZE 0x100000
61#define BAMBOO_LARGE_FLASH_LOW 0x087800000ULL
62#define BAMBOO_LARGE_FLASH_HIGH1 0x0ff800000ULL
63#define BAMBOO_LARGE_FLASH_HIGH2 0x0ffc00000ULL
64#define BAMBOO_LARGE_FLASH_SIZE 0x400000
65#define BAMBOO_SRAM_LOW 0x087f00000ULL
66#define BAMBOO_SRAM_HIGH1 0x0fff00000ULL
67#define BAMBOO_SRAM_HIGH2 0x0ff800000ULL
68#define BAMBOO_SRAM_SIZE 0x100000
69#define BAMBOO_NAND_FLASH_REG_ADDR 0x090000000ULL
70#define BAMBOO_NAND_FLASH_REG_SIZE 0x2000
71
72/*
73 * Serial port defines
74 */
75#define RS_TABLE_SIZE 4
76
77#define UART0_IO_BASE 0xEF600300
78#define UART1_IO_BASE 0xEF600400
79#define UART2_IO_BASE 0xEF600500
80#define UART3_IO_BASE 0xEF600600
81
82#define BASE_BAUD 33177600/3/16
83#define UART0_INT 0
84#define UART1_INT 1
85#define UART2_INT 3
86#define UART3_INT 4
87
88#define STD_UART_OP(num) \
89 { 0, BASE_BAUD, 0, UART##num##_INT, \
90 (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
91 iomem_base: UART##num##_IO_BASE, \
92 io_type: SERIAL_IO_MEM},
93
94#define SERIAL_PORT_DFNS \
95 STD_UART_OP(0) \
96 STD_UART_OP(1) \
97 STD_UART_OP(2) \
98 STD_UART_OP(3)
99
100/* PCI support */
101#define BAMBOO_PCI_CFGA_PLB32 0xeec00000
102#define BAMBOO_PCI_CFGD_PLB32 0xeec00004
103
104#define BAMBOO_PCI_IO_BASE 0x00000000e8000000ULL
105#define BAMBOO_PCI_IO_SIZE 0x00010000
106#define BAMBOO_PCI_MEM_OFFSET 0x00000000
107#define BAMBOO_PCI_PHY_MEM_BASE 0x00000000a0000000ULL
108
109#define BAMBOO_PCI_LOWER_IO 0x00000000
110#define BAMBOO_PCI_UPPER_IO 0x0000ffff
111#define BAMBOO_PCI_LOWER_MEM 0xa0000000
112#define BAMBOO_PCI_UPPER_MEM 0xafffffff
113#define BAMBOO_PCI_MEM_BASE 0xa0000000
114
115#define BAMBOO_PCIL0_BASE 0x00000000ef400000ULL
116#define BAMBOO_PCIL0_SIZE 0x40
117
118#define BAMBOO_PCIL0_PMM0LA 0x000
119#define BAMBOO_PCIL0_PMM0MA 0x004
120#define BAMBOO_PCIL0_PMM0PCILA 0x008
121#define BAMBOO_PCIL0_PMM0PCIHA 0x00C
122#define BAMBOO_PCIL0_PMM1LA 0x010
123#define BAMBOO_PCIL0_PMM1MA 0x014
124#define BAMBOO_PCIL0_PMM1PCILA 0x018
125#define BAMBOO_PCIL0_PMM1PCIHA 0x01C
126#define BAMBOO_PCIL0_PMM2LA 0x020
127#define BAMBOO_PCIL0_PMM2MA 0x024
128#define BAMBOO_PCIL0_PMM2PCILA 0x028
129#define BAMBOO_PCIL0_PMM2PCIHA 0x02C
130#define BAMBOO_PCIL0_PTM1MS 0x030
131#define BAMBOO_PCIL0_PTM1LA 0x034
132#define BAMBOO_PCIL0_PTM2MS 0x038
133#define BAMBOO_PCIL0_PTM2LA 0x03C
134
135#endif /* __ASM_BAMBOO_H__ */
136#endif /* __KERNEL__ */
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-28 04:02:56 -0500