1 files changed, 211 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c
new file mode 100644
index 000000000000..61599d919ea8
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/linkstation.c
@@ -0,0 +1,211 @@
+/*
+ * Board setup routines for the Buffalo Linkstation / Kurobox Platform.
+ *
+ * Copyright (C) 2006 G. Liakhovetski (g.liakhovetski@gmx.de)
+ *
+ * Based on sandpoint.c by Mark A. Greer
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of
+ * any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/initrd.h>
+#include <linux/root_dev.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/time.h>
+#include <asm/prom.h>
+#include <asm/mpic.h>
+#include <asm/mpc10x.h>
+#include <asm/pci-bridge.h>
+
+static struct mtd_partition linkstation_physmap_partitions[] = {
+        {
+                .name   = "mtd_firmimg",
+                .offset = 0x000000,
+                .size   = 0x300000,
+        },
+        {
+                .name   = "mtd_bootcode",
+                .offset = 0x300000,
+                .size   = 0x070000,
+        },
+        {
+                .name   = "mtd_status",
+                .offset = 0x370000,
+                .size   = 0x010000,
+        },
+        {
+                .name   = "mtd_conf",
+                .offset = 0x380000,
+                .size   = 0x080000,
+        },
+        {
+                .name   = "mtd_allflash",
+                .offset = 0x000000,
+                .size   = 0x400000,
+        },
+        {
+                .name   = "mtd_data",
+                .offset = 0x310000,
+                .size   = 0x0f0000,
+        },
+};
+
+static int __init add_bridge(struct device_node *dev)
+{
+        int len;
+        struct pci_controller *hose;
+        int *bus_range;
+
+        printk("Adding PCI host bridge %s\n", dev->full_name);
+
+        bus_range = (int *) get_property(dev, "bus-range", &len);
+        if (bus_range == NULL || len < 2 * sizeof(int))
+                printk(KERN_WARNING "Can't get bus-range for %s, assume"
+                                " bus 0\n", dev->full_name);
+
+        hose = pcibios_alloc_controller();
+        if (hose == NULL)
+                return -ENOMEM;
+        hose->first_busno = bus_range ? bus_range[0] : 0;
+        hose->last_busno = bus_range ? bus_range[1] : 0xff;
+        hose->arch_data = dev;
+        setup_indirect_pci(hose, 0xfec00000, 0xfee00000);
+
+        /* Interpret the "ranges" property */
+        /* This also maps the I/O region and sets isa_io/mem_base */
+        pci_process_bridge_OF_ranges(hose, dev, 1);
+
+        return 0;
+}
+
+static void __init linkstation_setup_arch(void)
+{
+        struct device_node *np;
+#ifdef CONFIG_MTD_PHYSMAP
+        physmap_set_partitions(linkstation_physmap_partitions,
+                               ARRAY_SIZE(linkstation_physmap_partitions));
+#endif
+
+#ifdef CONFIG_BLK_DEV_INITRD
+        if (initrd_start)
+                ROOT_DEV = Root_RAM0;
+        else
+#endif
+#ifdef  CONFIG_ROOT_NFS
+                ROOT_DEV = Root_NFS;
+#else
+                ROOT_DEV = Root_HDA1;
+#endif
+
+        /* Lookup PCI host bridges */
+        for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
+                add_bridge(np);
+
+        printk(KERN_INFO "BUFFALO Network Attached Storage Series\n");
+        printk(KERN_INFO "(C) 2002-2005 BUFFALO INC.\n");
+}
+
+/*
+ * Interrupt setup and service.  Interrrupts on the linkstation come
+ * from the four PCI slots plus onboard 8241 devices: I2C, DUART.
+ */
+static void __init linkstation_init_IRQ(void)
+{
+        struct mpic *mpic;
+        struct device_node *dnp;
+        void *prop;
+        int size;
+        phys_addr_t paddr;
+
+        dnp = of_find_node_by_type(NULL, "open-pic");
+        if (dnp == NULL)
+                return;
+
+        prop = (struct device_node *)get_property(dnp, "reg", &size);
+        paddr = (phys_addr_t)of_translate_address(dnp, prop);
+
+        mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY | MPIC_WANTS_RESET, 4, 32, " EPIC     ");
+        BUG_ON(mpic == NULL);
+
+        /* PCI IRQs */
+        mpic_assign_isu(mpic, 0, paddr + 0x10200);
+
+        /* I2C */
+        mpic_assign_isu(mpic, 1, paddr + 0x11000);
+
+        /* ttyS0, ttyS1 */
+        mpic_assign_isu(mpic, 2, paddr + 0x11100);
+
+        mpic_init(mpic);
+}
+
+extern void avr_uart_configure(void);
+extern void avr_uart_send(const char);
+
+static void linkstation_restart(char *cmd)
+{
+        local_irq_disable();
+
+        /* Reset system via AVR */
+        avr_uart_configure();
+        /* Send reboot command */
+        avr_uart_send('C');
+
+        for(;;)  /* Spin until reset happens */
+                avr_uart_send('G');     /* "kick" */
+}
+
+static void linkstation_power_off(void)
+{
+        local_irq_disable();
+
+        /* Power down system via AVR */
+        avr_uart_configure();
+        /* send shutdown command */
+        avr_uart_send('E');
+
+        for(;;)  /* Spin until power-off happens */
+                avr_uart_send('G');     /* "kick" */
+        /* NOTREACHED */
+}
+
+static void linkstation_halt(void)
+{
+        linkstation_power_off();
+        /* NOTREACHED */
+}
+
+static void linkstation_show_cpuinfo(struct seq_file *m)
+{
+        seq_printf(m, "vendor\t\t: Buffalo Technology\n");
+        seq_printf(m, "machine\t\t: Linkstation I/Kurobox(HG)\n");
+}
+
+static int __init linkstation_probe(void)
+{
+        unsigned long root;
+
+        root = of_get_flat_dt_root();
+
+        if (!of_flat_dt_is_compatible(root, "linkstation"))
+                return 0;
+        return 1;
+}
+
+define_machine(linkstation){
+        .name                   = "Buffalo Linkstation",
+        .probe                  = linkstation_probe,
+        .setup_arch             = linkstation_setup_arch,
+        .init_IRQ               = linkstation_init_IRQ,
+        .show_cpuinfo           = linkstation_show_cpuinfo,
+        .get_irq                = mpic_get_irq,
+        .restart                = linkstation_restart,
+        .power_off              = linkstation_power_off,
+        .halt                   = linkstation_halt,
+        .calibrate_decr         = generic_calibrate_decr,
+};