120 files changed, 9109 insertions, 0 deletions
diff --git a/arch/mn10300/include/asm/Kbuild b/arch/mn10300/include/asm/Kbuild
new file mode 100644
index 000000000000..c68e1680da01
--- /dev/null
+++ b/arch/mn10300/include/asm/Kbuild
@@ -0,0 +1 @@
+include include/asm-generic/Kbuild.asm
diff --git a/arch/mn10300/include/asm/atomic.h b/arch/mn10300/include/asm/atomic.h
new file mode 100644
index 000000000000..bc064825f9b1
--- /dev/null
+++ b/arch/mn10300/include/asm/atomic.h
@@ -0,0 +1,157 @@
+/* MN10300 Atomic counter operations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_ATOMIC_H
+#define _ASM_ATOMIC_H
+#ifdef CONFIG_SMP
+#error not SMP safe
+#endif
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ */
+#define ATOMIC_INIT(i)  { (i) }
+#ifdef __KERNEL__
+/**
+ * atomic_read - read atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically reads the value of @v.  Note that the guaranteed
+ * useful range of an atomic_t is only 24 bits.
+ */
+#define atomic_read(v)  ((v)->counter)
+/**
+ * atomic_set - set atomic variable
+ * @v: pointer of type atomic_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i.  Note that the guaranteed
+ * useful range of an atomic_t is only 24 bits.
+ */
+#define atomic_set(v, i) (((v)->counter) = (i))
+#include <asm/system.h>
+/**
+ * atomic_add_return - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v and returns the result
+ * Note that the guaranteed useful range of an atomic_t is only 24 bits.
+ */
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+        unsigned long flags;
+        int temp;
+        local_irq_save(flags);
+        temp = v->counter;
+        temp += i;
+        v->counter = temp;
+        local_irq_restore(flags);
+        return temp;
+}
+/**
+ * atomic_sub_return - subtract integer from atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v and returns the result
+ * Note that the guaranteed useful range of an atomic_t is only 24 bits.
+ */
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+        unsigned long flags;
+        int temp;
+        local_irq_save(flags);
+        temp = v->counter;
+        temp -= i;
+        v->counter = temp;
+        local_irq_restore(flags);
+        return temp;
+}
+static inline int atomic_add_negative(int i, atomic_t *v)
+{
+        return atomic_add_return(i, v) < 0;
+}
+static inline void atomic_add(int i, atomic_t *v)
+{
+        atomic_add_return(i, v);
+}
+static inline void atomic_sub(int i, atomic_t *v)
+{
+        atomic_sub_return(i, v);
+}
+static inline void atomic_inc(atomic_t *v)
+{
+        atomic_add_return(1, v);
+}
+static inline void atomic_dec(atomic_t *v)
+{
+        atomic_sub_return(1, v);
+}
+#define atomic_dec_return(v)            atomic_sub_return(1, (v))
+#define atomic_inc_return(v)            atomic_add_return(1, (v))
+#define atomic_sub_and_test(i, v)       (atomic_sub_return((i), (v)) == 0)
+#define atomic_dec_and_test(v)          (atomic_sub_return(1, (v)) == 0)
+#define atomic_inc_and_test(v)          (atomic_add_return(1, (v)) == 0)
+#define atomic_add_unless(v, a, u)                              \
+({                                                              \
+        int c, old;                                             \
+        c = atomic_read(v);                                     \
+        while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \
+                c = old;                                        \
+        c != (u);                                               \
+})
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
+{
+        unsigned long flags;
+        mask = ~mask;
+        local_irq_save(flags);
+        *addr &= mask;
+        local_irq_restore(flags);
+}
+#define atomic_xchg(ptr, v)             (xchg(&(ptr)->counter, (v)))
+#define atomic_cmpxchg(v, old, new)     (cmpxchg(&((v)->counter), (old), (new)))
+/* Atomic operations are already serializing on MN10300??? */
+#define smp_mb__before_atomic_dec()     barrier()
+#define smp_mb__after_atomic_dec()      barrier()
+#define smp_mb__before_atomic_inc()     barrier()
+#define smp_mb__after_atomic_inc()      barrier()
+#include <asm-generic/atomic.h>
+#endif /* __KERNEL__ */
+#endif /* _ASM_ATOMIC_H */
diff --git a/arch/mn10300/include/asm/auxvec.h b/arch/mn10300/include/asm/auxvec.h
new file mode 100644
index 000000000000..4fdb60b2ae39
--- /dev/null
+++ b/arch/mn10300/include/asm/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef _ASM_AUXVEC_H
+#define _ASM_AUXVEC_H
+#endif
diff --git a/arch/mn10300/include/asm/bitops.h b/arch/mn10300/include/asm/bitops.h
new file mode 100644
index 000000000000..0b610f482abb
--- /dev/null
+++ b/arch/mn10300/include/asm/bitops.h
@@ -0,0 +1,240 @@
+/* MN10300 bit operations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ * These have to be done with inline assembly: that way the bit-setting
+ * is guaranteed to be atomic. All bit operations return 0 if the bit
+ * was cleared before the operation and != 0 if it was not.
+ *
+ * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
+ */
+#ifndef __ASM_BITOPS_H
+#define __ASM_BITOPS_H
+#include <asm/cpu-regs.h>
+#define smp_mb__before_clear_bit()      barrier()
+#define smp_mb__after_clear_bit()       barrier()
+/*
+ * set bit
+ */
+#define __set_bit(nr, addr)                                     \
+({                                                              \
+        volatile unsigned char *_a = (unsigned char *)(addr);   \
+        const unsigned shift = (nr) & 7;                        \
+        _a += (nr) >> 3;                                        \
+                                                                \
+        asm volatile("bset %2,(%1) # set_bit reg"               \
+                     : "=m"(*_a)                                \
+                     : "a"(_a), "d"(1 << shift),  "m"(*_a)      \
+                     : "memory", "cc");                         \
+})
+#define set_bit(nr, addr) __set_bit((nr), (addr))
+/*
+ * clear bit
+ */
+#define ___clear_bit(nr, addr)                                  \
+({                                                              \
+        volatile unsigned char *_a = (unsigned char *)(addr);   \
+        const unsigned shift = (nr) & 7;                        \
+        _a += (nr) >> 3;                                        \
+                                                                \
+        asm volatile("bclr %2,(%1) # clear_bit reg"             \
+                     : "=m"(*_a)                                \
+                     : "a"(_a), "d"(1 << shift), "m"(*_a)       \
+                     : "memory", "cc");                         \
+})
+#define clear_bit(nr, addr) ___clear_bit((nr), (addr))
+static inline void __clear_bit(int nr, volatile void *addr)
+{
+        unsigned int *a = (unsigned int *) addr;
+        int mask;
+        a += nr >> 5;
+        mask = 1 << (nr & 0x1f);
+        *a &= ~mask;
+}
+/*
+ * test bit
+ */
+static inline int test_bit(int nr, const volatile void *addr)
+{
+        return 1UL & (((const unsigned int *) addr)[nr >> 5] >> (nr & 31));
+}
+/*
+ * change bit
+ */
+static inline void __change_bit(int nr, volatile void *addr)
+{
+        int     mask;
+        unsigned int *a = (unsigned int *) addr;
+        a += nr >> 5;
+        mask = 1 << (nr & 0x1f);
+        *a ^= mask;
+}
+extern void change_bit(int nr, volatile void *addr);
+/*
+ * test and set bit
+ */
+#define __test_and_set_bit(nr,addr)                             \
+({                                                              \
+        volatile unsigned char *_a = (unsigned char *)(addr);   \
+        const unsigned shift = (nr) & 7;                        \
+        unsigned epsw;                                          \
+        _a += (nr) >> 3;                                        \
+                                                                \
+        asm volatile("bset %3,(%2) # test_set_bit reg\n"        \
+                     "mov epsw,%1"                              \
+                     : "=m"(*_a), "=d"(epsw)                    \
+                     : "a"(_a), "d"(1 << shift), "m"(*_a)       \
+                     : "memory", "cc");                         \
+                                                                \
+        !(epsw & EPSW_FLAG_Z);                                  \
+})
+#define test_and_set_bit(nr, addr) __test_and_set_bit((nr), (addr))
+/*
+ * test and clear bit
+ */
+#define __test_and_clear_bit(nr, addr)                          \
+({                                                              \
+        volatile unsigned char *_a = (unsigned char *)(addr);   \
+        const unsigned shift = (nr) & 7;                        \
+        unsigned epsw;                                          \
+        _a += (nr) >> 3;                                        \
+                                                                \
+        asm volatile("bclr %3,(%2) # test_clear_bit reg\n"      \
+                     "mov epsw,%1"                              \
+                     : "=m"(*_a), "=d"(epsw)                    \
+                     : "a"(_a), "d"(1 << shift), "m"(*_a)       \
+                     : "memory", "cc");                         \
+                                                                \
+        !(epsw & EPSW_FLAG_Z);                                  \
+})
+#define test_and_clear_bit(nr, addr) __test_and_clear_bit((nr), (addr))
+/*
+ * test and change bit
+ */
+static inline int __test_and_change_bit(int nr, volatile void *addr)
+{
+        int     mask, retval;
+        unsigned int *a = (unsigned int *)addr;
+        a += nr >> 5;
+        mask = 1 << (nr & 0x1f);
+        retval = (mask & *a) != 0;
+        *a ^= mask;
+        return retval;
+}
+extern int test_and_change_bit(int nr, volatile void *addr);
+#include <asm-generic/bitops/lock.h>
+#ifdef __KERNEL__
+/**
+ * __ffs - find first bit set
+ * @x: the word to search
+ *
+ * - return 31..0 to indicate bit 31..0 most least significant bit set
+ * - if no bits are set in x, the result is undefined
+ */
+static inline __attribute__((const))
+unsigned long __ffs(unsigned long x)
+{
+        int bit;
+        asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(x & -x));
+        return bit;
+}
+/*
+ * special slimline version of fls() for calculating ilog2_u32()
+ * - note: no protection against n == 0
+ */
+static inline __attribute__((const))
+int __ilog2_u32(u32 n)
+{
+        int bit;
+        asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(n));
+        return bit;
+}
+/**
+ * fls - find last bit set
+ * @x: the word to search
+ *
+ * This is defined the same way as ffs:
+ * - return 32..1 to indicate bit 31..0 most significant bit set
+ * - return 0 to indicate no bits set
+ */
+static inline __attribute__((const))
+int fls(int x)
+{
+        return (x != 0) ? __ilog2_u32(x) + 1 : 0;
+}
+/**
+ * __fls - find last (most-significant) set bit in a long word
+ * @word: the word to search
+ *
+ * Undefined if no set bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __fls(unsigned long word)
+{
+        return __ilog2_u32(word);
+}
+/**
+ * ffs - find first bit set
+ * @x: the word to search
+ *
+ * - return 32..1 to indicate bit 31..0 most least significant bit set
+ * - return 0 to indicate no bits set
+ */
+static inline __attribute__((const))
+int ffs(int x)
+{
+        /* Note: (x & -x) gives us a mask that is the least significant
+         * (rightmost) 1-bit of the value in x.
+         */
+        return fls(x & -x);
+}
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/hweight.h>
+#define ext2_set_bit_atomic(lock, nr, addr) \
+        test_and_set_bit((nr) ^ 0x18, (addr))
+#define ext2_clear_bit_atomic(lock, nr, addr) \
+        test_and_clear_bit((nr) ^ 0x18, (addr))
+#include <asm-generic/bitops/ext2-non-atomic.h>
+#include <asm-generic/bitops/minix-le.h>
+#endif /* __KERNEL__ */
+#endif /* __ASM_BITOPS_H */
diff --git a/arch/mn10300/include/asm/bug.h b/arch/mn10300/include/asm/bug.h
new file mode 100644
index 000000000000..4fcf3384e259
--- /dev/null
+++ b/arch/mn10300/include/asm/bug.h
@@ -0,0 +1,35 @@
+/* MN10300 Kernel bug reporting
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_BUG_H
+#define _ASM_BUG_H
+/*
+ * Tell the user there is some problem.
+ */
+#define _debug_bug_trap()                                       \
+do {                                                            \
+        asm volatile(                                           \
+                "       syscall 15                      \n"     \
+                "0:                                     \n"     \
+                "       .section __bug_table,\"a\"      \n"     \
+                "       .long 0b,%0,%1                  \n"     \
+                "       .previous                       \n"     \
+                :                                               \
+                : "i"(__FILE__), "i"(__LINE__)                  \
+                );                                              \
+} while (0)
+#define BUG() _debug_bug_trap()
+#define HAVE_ARCH_BUG
+#include <asm-generic/bug.h>
+#endif /* _ASM_BUG_H */
diff --git a/arch/mn10300/include/asm/bugs.h b/arch/mn10300/include/asm/bugs.h
new file mode 100644
index 000000000000..31c8bc592b47
--- /dev/null
+++ b/arch/mn10300/include/asm/bugs.h
@@ -0,0 +1,20 @@
+/* MN10300 Checks for architecture-dependent bugs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_BUGS_H
+#define _ASM_BUGS_H
+#include <asm/processor.h>
+static inline void __init check_bugs(void)
+{
+}
+#endif /* _ASM_BUGS_H */
diff --git a/arch/mn10300/include/asm/busctl-regs.h b/arch/mn10300/include/asm/busctl-regs.h
new file mode 100644
index 000000000000..1632aef73401
--- /dev/null
+++ b/arch/mn10300/include/asm/busctl-regs.h
@@ -0,0 +1,151 @@
+/* AM33v2 on-board bus controller registers
+ *
+ * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_BUSCTL_REGS_H
+#define _ASM_BUSCTL_REGS_H
+#include <asm/cpu-regs.h>
+#ifdef __KERNEL__
+/* bus controller registers */
+#define BCCR                    __SYSREG(0xc0002000, u32)       /* bus controller control reg */
+#define BCCR_B0AD               0x00000003      /* block 0 (80000000-83ffffff) bus allocation */
+#define BCCR_B1AD               0x0000000c      /* block 1 (84000000-87ffffff) bus allocation */
+#define BCCR_B2AD               0x00000030      /* block 2 (88000000-8bffffff) bus allocation */
+#define BCCR_B3AD               0x000000c0      /* block 3 (8c000000-8fffffff) bus allocation */
+#define BCCR_B4AD               0x00000300      /* block 4 (90000000-93ffffff) bus allocation */
+#define BCCR_B5AD               0x00000c00      /* block 5 (94000000-97ffffff) bus allocation */
+#define BCCR_B6AD               0x00003000      /* block 6 (98000000-9bffffff) bus allocation */
+#define BCCR_B7AD               0x0000c000      /* block 7 (9c000000-9fffffff) bus allocation */
+#define BCCR_BxAD_EXBUS         0x0             /* - direct to system bus controller */
+#define BCCR_BxAD_OPEXBUS       0x1             /* - direct to memory bus controller */
+#define BCCR_BxAD_OCMBUS        0x2             /* - direct to on chip memory */
+#define BCCR_API                0x00070000      /* bus arbitration priority */
+#define BCCR_API_DMACICD        0x00000000      /* - DMA > CI > CD */
+#define BCCR_API_DMACDCI        0x00010000      /* - DMA > CD > CI */
+#define BCCR_API_CICDDMA        0x00020000      /* - CI > CD > DMA */
+#define BCCR_API_CDCIDMA        0x00030000      /* - CD > CI > DMA */
+#define BCCR_API_ROUNDROBIN     0x00040000      /* - round robin */
+#define BCCR_BEPRI_DMACICD      0x00c00000      /* bus error address priority */
+#define BCCR_BEPRI_DMACDCI      0x00000000      /* - DMA > CI > CD */
+#define BCCR_BEPRI_CICDDMA      0x00400000      /* - DMA > CD > CI */
+#define BCCR_BEPRI_CDCIDMA      0x00800000      /* - CI > CD > DMA */
+#define BCCR_BEPRI              0x00c00000      /* - CD > CI > DMA */
+#define BCCR_TMON               0x03000000      /* timeout value settings */
+#define BCCR_TMON_16IOCLK       0x00000000      /* - 16 IOCLK cycles */
+#define BCCR_TMON_256IOCLK      0x01000000      /* - 256 IOCLK cycles */
+#define BCCR_TMON_4096IOCLK     0x02000000      /* - 4096 IOCLK cycles */
+#define BCCR_TMON_65536IOCLK    0x03000000      /* - 65536 IOCLK cycles */
+#define BCCR_TMOE               0x10000000      /* timeout detection enable */
+#define BCBERR                  __SYSREG(0xc0002010, u32)       /* bus error source reg */
+#define BCBERR_BESB             0x0000001f      /* erroneous access destination space */
+#define BCBERR_BESB_MON         0x00000001      /* - monitor space */
+#define BCBERR_BESB_IO          0x00000002      /* - IO bus */
+#define BCBERR_BESB_EX          0x00000004      /* - EX bus */
+#define BCBERR_BESB_OPEX        0x00000008      /* - OpEX bus */
+#define BCBERR_BESB_OCM         0x00000010      /* - on chip memory */
+#define BCBERR_BERW             0x00000100      /* type of access */
+#define BCBERR_BERW_WRITE       0x00000000      /* - write */
+#define BCBERR_BERW_READ        0x00000100      /* - read */
+#define BCBERR_BESD             0x00000200      /* error detector */
+#define BCBERR_BESD_BCU         0x00000000      /* - BCU detected error */
+#define BCBERR_BESD_SLAVE_BUS   0x00000200      /* - slave bus detected error */
+#define BCBERR_BEBST            0x00000400      /* type of access */
+#define BCBERR_BEBST_SINGLE     0x00000000      /* - single */
+#define BCBERR_BEBST_BURST      0x00000400      /* - burst */
+#define BCBERR_BEME             0x00000800      /* multiple bus error flag */
+#define BCBERR_BEMR             0x00007000      /* master bus that caused the error */
+#define BCBERR_BEMR_NOERROR     0x00000000      /* - no error */
+#define BCBERR_BEMR_CI          0x00001000      /* - CPU instruction fetch bus caused error */
+#define BCBERR_BEMR_CD          0x00002000      /* - CPU data bus caused error */
+#define BCBERR_BEMR_DMA         0x00004000      /* - DMA bus caused error */
+#define BCBEAR                  __SYSREGC(0xc0002020, u32)      /* bus error address reg */
+/* system bus controller registers */
+#define SBBASE(X)               __SYSREG(0xd8c00100 + (X) * 0x10, u32)  /* SBC base addr regs */
+#define SBBASE_BE               0x00000001      /* bank enable */
+#define SBBASE_BAM              0x0000fffe      /* bank address mask [31:17] */
+#define SBBASE_BBA              0xfffe0000      /* bank base address [31:17] */
+#define SBCNTRL0(X)             __SYSREG(0xd8c00200 + (X) * 0x10, u32)  /* SBC bank ctrl0 regs */
+#define SBCNTRL0_WEH            0x00000f00      /* write enable hold */
+#define SBCNTRL0_REH            0x0000f000      /* read enable hold */
+#define SBCNTRL0_RWH            0x000f0000      /* SRW signal hold */
+#define SBCNTRL0_CSH            0x00f00000      /* chip select hold */
+#define SBCNTRL0_DAH            0x0f000000      /* data hold */
+#define SBCNTRL0_ADH            0xf0000000      /* address hold */
+#define SBCNTRL1(X)             __SYSREG(0xd8c00204 + (X) * 0x10, u32)  /* SBC bank ctrl1 regs */
+#define SBCNTRL1_WED            0x00000f00      /* write enable delay */
+#define SBCNTRL1_RED            0x0000f000      /* read enable delay */
+#define SBCNTRL1_RWD            0x000f0000      /* SRW signal delay */
+#define SBCNTRL1_ASW            0x00f00000      /* address strobe width */
+#define SBCNTRL1_CSD            0x0f000000      /* chip select delay */
+#define SBCNTRL1_ASD            0xf0000000      /* address strobe delay */
+#define SBCNTRL2(X)             __SYSREG(0xd8c00208 + (X) * 0x10, u32)  /* SBC bank ctrl2 regs */
+#define SBCNTRL2_WC             0x000000ff      /* wait count */
+#define SBCNTRL2_BWC            0x00000f00      /* burst wait count */
+#define SBCNTRL2_WM             0x01000000      /* wait mode setting */
+#define SBCNTRL2_WM_FIXEDWAIT   0x00000000      /* - fixed wait access */
+#define SBCNTRL2_WM_HANDSHAKE   0x01000000      /* - handshake access */
+#define SBCNTRL2_BM             0x02000000      /* bus synchronisation mode */
+#define SBCNTRL2_BM_SYNC        0x00000000      /* - synchronous mode */
+#define SBCNTRL2_BM_ASYNC       0x02000000      /* - asynchronous mode */
+#define SBCNTRL2_BW             0x04000000      /* bus width */
+#define SBCNTRL2_BW_32          0x00000000      /* - 32 bits */
+#define SBCNTRL2_BW_16          0x04000000      /* - 16 bits */
+#define SBCNTRL2_RWINV          0x08000000      /* R/W signal invert polarity */
+#define SBCNTRL2_RWINV_NORM     0x00000000      /* - normal (read high) */
+#define SBCNTRL2_RWINV_INV      0x08000000      /* - inverted (read low) */
+#define SBCNTRL2_BT             0x70000000      /* bus type setting */
+#define SBCNTRL2_BT_SRAM        0x00000000      /* - SRAM interface */
+#define SBCNTRL2_BT_ADMUX       0x00000000      /* - addr/data multiplexed interface */
+#define SBCNTRL2_BT_BROM        0x00000000      /* - burst ROM interface */
+#define SBCNTRL2_BTSE           0x80000000      /* burst enable */
+/* memory bus controller */
+#define SDBASE(X)               __SYSREG(0xda000008 + (X) * 0x4, u32)   /* MBC base addr regs */
+#define SDBASE_CE               0x00000001      /* chip enable */
+#define SDBASE_CBAM             0x0000fff0      /* chip base address mask [31:20] */
+#define SDBASE_CBAM_SHIFT       16
+#define SDBASE_CBA              0xfff00000      /* chip base address [31:20] */
+#define SDRAMBUS                __SYSREG(0xda000000, u32)       /* bus mode control reg */
+#define SDRAMBUS_REFEN          0x00000004      /* refresh enable */
+#define SDRAMBUS_TRC            0x00000018      /* refresh command delay time */
+#define SDRAMBUS_BSTPT          0x00000020      /* burst stop command enable */
+#define SDRAMBUS_PONSEQ         0x00000040      /* power on sequence */
+#define SDRAMBUS_SELFREQ        0x00000080      /* self-refresh mode request */
+#define SDRAMBUS_SELFON         0x00000100      /* self-refresh mode on */
+#define SDRAMBUS_SIZE           0x00030000      /* SDRAM size */
+#define SDRAMBUS_SIZE_64Mbit    0x00010000      /* 64Mbit SDRAM (x16) */
+#define SDRAMBUS_SIZE_128Mbit   0x00020000      /* 128Mbit SDRAM (x16) */
+#define SDRAMBUS_SIZE_256Mbit   0x00030000      /* 256Mbit SDRAM (x16) */
+#define SDRAMBUS_TRASWAIT       0x000c0000      /* row address precharge command cycle number */
+#define SDRAMBUS_REFNUM         0x00300000      /* refresh command number */
+#define SDRAMBUS_BSTWAIT        0x00c00000      /* burst stop command cycle */
+#define SDRAMBUS_SETWAIT        0x03000000      /* mode register setting command cycle */
+#define SDRAMBUS_PREWAIT        0x0c000000      /* precharge command cycle */
+#define SDRAMBUS_RASLATE        0x30000000      /* RAS latency */
+#define SDRAMBUS_CASLATE        0xc0000000      /* CAS latency */
+#define SDREFCNT                __SYSREG(0xda000004, u32)       /* refresh period reg */
+#define SDREFCNT_PERI           0x00000fff      /* refresh period */
+#define SDSHDW                  __SYSREG(0xda000010, u32)       /* test reg */
+#endif /* __KERNEL__ */
+#endif /* _ASM_BUSCTL_REGS_H */
diff --git a/arch/mn10300/include/asm/byteorder.h b/arch/mn10300/include/asm/byteorder.h
new file mode 100644
index 000000000000..5dd0bdd9feee
--- /dev/null
+++ b/arch/mn10300/include/asm/byteorder.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_BYTEORDER_H
+#define _ASM_BYTEORDER_H
+#include <linux/byteorder/little_endian.h>
+#endif /* _ASM_BYTEORDER_H */
diff --git a/arch/mn10300/include/asm/cache.h b/arch/mn10300/include/asm/cache.h
new file mode 100644
index 000000000000..9e01122208a9
--- /dev/null
+++ b/arch/mn10300/include/asm/cache.h
@@ -0,0 +1,54 @@
+/* MN10300 cache management registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_CACHE_H
+#define _ASM_CACHE_H
+#include <asm/cpu-regs.h>
+#include <asm/proc/cache.h>
+#ifndef __ASSEMBLY__
+#define L1_CACHE_DISPARITY      (L1_CACHE_NENTRIES * L1_CACHE_BYTES)
+#else
+#define L1_CACHE_DISPARITY      L1_CACHE_NENTRIES * L1_CACHE_BYTES
+#endif
+/* data cache purge registers
+ * - read from the register to unconditionally purge that cache line
+ * - write address & 0xffffff00 to conditionally purge that cache line
+ *   - clear LSB to request invalidation as well
+ */
+#define DCACHE_PURGE(WAY, ENTRY) \
+        __SYSREG(0xc8400000 + (WAY) * L1_CACHE_WAYDISP + \
+                 (ENTRY) * L1_CACHE_BYTES, u32)
+#define DCACHE_PURGE_WAY0(ENTRY) \
+        __SYSREG(0xc8400000 + 0 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
+#define DCACHE_PURGE_WAY1(ENTRY) \
+        __SYSREG(0xc8400000 + 1 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
+#define DCACHE_PURGE_WAY2(ENTRY) \
+        __SYSREG(0xc8400000 + 2 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
+#define DCACHE_PURGE_WAY3(ENTRY) \
+        __SYSREG(0xc8400000 + 3 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
+/* instruction cache access registers */
+#define ICACHE_DATA(WAY, ENTRY, OFF) \
+        __SYSREG(0xc8000000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32)
+#define ICACHE_TAG(WAY, ENTRY)   \
+        __SYSREG(0xc8100000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32)
+/* instruction cache access registers */
+#define DCACHE_DATA(WAY, ENTRY, OFF) \
+        __SYSREG(0xc8200000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32)
+#define DCACHE_TAG(WAY, ENTRY)   \
+        __SYSREG(0xc8300000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32)
+#endif /* _ASM_CACHE_H */
diff --git a/arch/mn10300/include/asm/cacheflush.h b/arch/mn10300/include/asm/cacheflush.h
new file mode 100644
index 000000000000..2db746a251f8
--- /dev/null
+++ b/arch/mn10300/include/asm/cacheflush.h
@@ -0,0 +1,116 @@
+/* MN10300 Cache flushing
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_CACHEFLUSH_H
+#define _ASM_CACHEFLUSH_H
+#ifndef __ASSEMBLY__
+/* Keep includes the same across arches.  */
+#include <linux/mm.h>
+/*
+ * virtually-indexed cache managment (our cache is physically indexed)
+ */
+#define flush_cache_all()                       do {} while (0)
+#define flush_cache_mm(mm)                      do {} while (0)
+#define flush_cache_dup_mm(mm)                  do {} while (0)
+#define flush_cache_range(mm, start, end)       do {} while (0)
+#define flush_cache_page(vma, vmaddr, pfn)      do {} while (0)
+#define flush_cache_vmap(start, end)            do {} while (0)
+#define flush_cache_vunmap(start, end)          do {} while (0)
+#define flush_dcache_page(page)                 do {} while (0)
+#define flush_dcache_mmap_lock(mapping)         do {} while (0)
+#define flush_dcache_mmap_unlock(mapping)       do {} while (0)
+/*
+ * physically-indexed cache managment
+ */
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+extern void flush_icache_range(unsigned long start, unsigned long end);
+extern void flush_icache_page(struct vm_area_struct *vma, struct page *pg);
+#else
+#define flush_icache_range(start, end)          do {} while (0)
+#define flush_icache_page(vma, pg)              do {} while (0)
+#endif
+#define flush_icache_user_range(vma, pg, adr, len) \
+        flush_icache_range(adr, adr + len)
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+        do {                                    \
+                memcpy(dst, src, len);          \
+                flush_icache_page(vma, page);   \
+        } while (0)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+        memcpy(dst, src, len)
+/*
+ * primitive routines
+ */
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+extern void mn10300_icache_inv(void);
+extern void mn10300_dcache_inv(void);
+extern void mn10300_dcache_inv_page(unsigned start);
+extern void mn10300_dcache_inv_range(unsigned start, unsigned end);
+extern void mn10300_dcache_inv_range2(unsigned start, unsigned size);
+#ifdef CONFIG_MN10300_CACHE_WBACK
+extern void mn10300_dcache_flush(void);
+extern void mn10300_dcache_flush_page(unsigned start);
+extern void mn10300_dcache_flush_range(unsigned start, unsigned end);
+extern void mn10300_dcache_flush_range2(unsigned start, unsigned size);
+extern void mn10300_dcache_flush_inv(void);
+extern void mn10300_dcache_flush_inv_page(unsigned start);
+extern void mn10300_dcache_flush_inv_range(unsigned start, unsigned end);
+extern void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size);
+#else
+#define mn10300_dcache_flush()                          do {} while (0)
+#define mn10300_dcache_flush_page(start)                do {} while (0)
+#define mn10300_dcache_flush_range(start, end)          do {} while (0)
+#define mn10300_dcache_flush_range2(start, size)        do {} while (0)
+#define mn10300_dcache_flush_inv()                      mn10300_dcache_inv()
+#define mn10300_dcache_flush_inv_page(start) \
+        mn10300_dcache_inv_page((start))
+#define mn10300_dcache_flush_inv_range(start, end) \
+        mn10300_dcache_inv_range((start), (end))
+#define mn10300_dcache_flush_inv_range2(start, size) \
+        mn10300_dcache_inv_range2((start), (size))
+#endif /* CONFIG_MN10300_CACHE_WBACK */
+#else
+#define mn10300_icache_inv()                            do {} while (0)
+#define mn10300_dcache_inv()                            do {} while (0)
+#define mn10300_dcache_inv_page(start)                  do {} while (0)
+#define mn10300_dcache_inv_range(start, end)            do {} while (0)
+#define mn10300_dcache_inv_range2(start, size)          do {} while (0)
+#define mn10300_dcache_flush()                          do {} while (0)
+#define mn10300_dcache_flush_inv_page(start)            do {} while (0)
+#define mn10300_dcache_flush_inv()                      do {} while (0)
+#define mn10300_dcache_flush_inv_range(start, end)      do {} while (0)
+#define mn10300_dcache_flush_inv_range2(start, size)    do {} while (0)
+#define mn10300_dcache_flush_page(start)                do {} while (0)
+#define mn10300_dcache_flush_range(start, end)          do {} while (0)
+#define mn10300_dcache_flush_range2(start, size)        do {} while (0)
+#endif /* CONFIG_MN10300_CACHE_DISABLED */
+/*
+ * internal debugging function
+ */
+#ifdef CONFIG_DEBUG_PAGEALLOC
+extern void kernel_map_pages(struct page *page, int numpages, int enable);
+#endif
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_CACHEFLUSH_H */
diff --git a/arch/mn10300/include/asm/checksum.h b/arch/mn10300/include/asm/checksum.h
new file mode 100644
index 000000000000..9fb2a8d8826a
--- /dev/null
+++ b/arch/mn10300/include/asm/checksum.h
@@ -0,0 +1,86 @@
+/* MN10300 Optimised checksumming code
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_CHECKSUM_H
+#define _ASM_CHECKSUM_H
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+extern __wsum csum_partial_copy_nocheck(const void *src, void *dst,
+                                        int len, __wsum sum);
+extern __wsum csum_partial_copy_from_user(const void *src, void *dst,
+                                          int len, __wsum sum,
+                                          int *err_ptr);
+extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+extern __sum16 ip_compute_csum(const void *buff, int len);
+#define csum_partial_copy_fromuser csum_partial_copy
+extern __wsum csum_partial_copy(const void *src, void *dst, int len,
+                                __wsum sum);
+static inline __sum16 csum_fold(__wsum sum)
+{
+        asm(
+                "       add     %1,%0           \n"
+                "       addc    0xffff,%0       \n"
+                : "=r" (sum)
+                : "r" (sum << 16), "0" (sum & 0xffff0000)
+                : "cc"
+            );
+        return (~sum) >> 16;
+}
+static inline __wsum csum_tcpudp_nofold(unsigned long saddr,
+                                        unsigned long daddr,
+                                        unsigned short len,
+                                        unsigned short proto,
+                                        __wsum sum)
+{
+        __wsum tmp;
+        tmp = (__wsum) ntohs(len) << 16;
+        tmp += (__wsum) proto << 8;
+        asm(
+                "       add     %1,%0           \n"
+                "       addc    %2,%0           \n"
+                "       addc    %3,%0           \n"
+                "       addc    0,%0            \n"
+                : "=r" (sum)
+                : "r" (daddr), "r"(saddr), "r"(tmp), "0"(sum)
+                : "cc"
+            );
+        return sum;
+}
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16 csum_tcpudp_magic(unsigned long saddr,
+                                        unsigned long daddr,
+                                        unsigned short len,
+                                        unsigned short proto,
+                                        __wsum sum)
+{
+        return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+#undef _HAVE_ARCH_IPV6_CSUM
+/*
+ *      Copy and checksum to user
+ */
+#define HAVE_CSUM_COPY_USER
+extern __wsum csum_and_copy_to_user(const void *src, void *dst, int len,
+                                    __wsum sum, int *err_ptr);
+#endif /* _ASM_CHECKSUM_H */
diff --git a/arch/mn10300/include/asm/cpu-regs.h b/arch/mn10300/include/asm/cpu-regs.h
new file mode 100644
index 000000000000..757e9b5388ea
--- /dev/null
+++ b/arch/mn10300/include/asm/cpu-regs.h
@@ -0,0 +1,290 @@
+/* MN10300 Core system registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_CPU_REGS_H
+#define _ASM_CPU_REGS_H
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#endif
+#ifdef CONFIG_MN10300_CPU_AM33V2
+/* we tell the compiler to pretend to be AM33 so that it doesn't try and use
+ * the FP regs, but tell the assembler that we're actually allowed AM33v2
+ * instructions */
+#ifndef __ASSEMBLY__
+asm(" .am33_2\n");
+#else
+.am33_2
+#endif
+#endif
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#define __SYSREG(ADDR, TYPE) (*(volatile TYPE *)(ADDR))
+#define __SYSREGC(ADDR, TYPE) (*(const volatile TYPE *)(ADDR))
+#else
+#define __SYSREG(ADDR, TYPE) ADDR
+#define __SYSREGC(ADDR, TYPE) ADDR
+#endif
+/* CPU registers */
+#define EPSW_FLAG_Z             0x00000001      /* zero flag */
+#define EPSW_FLAG_N             0x00000002      /* negative flag */
+#define EPSW_FLAG_C             0x00000004      /* carry flag */
+#define EPSW_FLAG_V             0x00000008      /* overflow flag */
+#define EPSW_IM                 0x00000700      /* interrupt mode */
+#define EPSW_IM_0               0x00000000      /* interrupt mode 0 */
+#define EPSW_IM_1               0x00000100      /* interrupt mode 1 */
+#define EPSW_IM_2               0x00000200      /* interrupt mode 2 */
+#define EPSW_IM_3               0x00000300      /* interrupt mode 3 */
+#define EPSW_IM_4               0x00000400      /* interrupt mode 4 */
+#define EPSW_IM_5               0x00000500      /* interrupt mode 5 */
+#define EPSW_IM_6               0x00000600      /* interrupt mode 6 */
+#define EPSW_IM_7               0x00000700      /* interrupt mode 7 */
+#define EPSW_IE                 0x00000800      /* interrupt enable */
+#define EPSW_S                  0x00003000      /* software auxilliary bits */
+#define EPSW_T                  0x00008000      /* trace enable */
+#define EPSW_nSL                0x00010000      /* not supervisor level */
+#define EPSW_NMID               0x00020000      /* nonmaskable interrupt disable */
+#define EPSW_nAR                0x00040000      /* register bank control */
+#define EPSW_ML                 0x00080000      /* monitor level */
+#define EPSW_FE                 0x00100000      /* FPU enable */
+/* FPU registers */
+#define FPCR_EF_I               0x00000001      /* inexact result FPU exception flag */
+#define FPCR_EF_U               0x00000002      /* underflow FPU exception flag */
+#define FPCR_EF_O               0x00000004      /* overflow FPU exception flag */
+#define FPCR_EF_Z               0x00000008      /* zero divide FPU exception flag */
+#define FPCR_EF_V               0x00000010      /* invalid operand FPU exception flag */
+#define FPCR_EE_I               0x00000020      /* inexact result FPU exception enable */
+#define FPCR_EE_U               0x00000040      /* underflow FPU exception enable */
+#define FPCR_EE_O               0x00000080      /* overflow FPU exception enable */
+#define FPCR_EE_Z               0x00000100      /* zero divide FPU exception enable */
+#define FPCR_EE_V               0x00000200      /* invalid operand FPU exception enable */
+#define FPCR_EC_I               0x00000400      /* inexact result FPU exception cause */
+#define FPCR_EC_U               0x00000800      /* underflow FPU exception cause */
+#define FPCR_EC_O               0x00001000      /* overflow FPU exception cause */
+#define FPCR_EC_Z               0x00002000      /* zero divide FPU exception cause */
+#define FPCR_EC_V               0x00004000      /* invalid operand FPU exception cause */
+#define FPCR_RM                 0x00030000      /* rounding mode */
+#define FPCR_RM_NEAREST         0x00000000      /* - round to nearest value */
+#define FPCR_FCC_U              0x00040000      /* FPU unordered condition code */
+#define FPCR_FCC_E              0x00080000      /* FPU equal condition code */
+#define FPCR_FCC_G              0x00100000      /* FPU greater than condition code */
+#define FPCR_FCC_L              0x00200000      /* FPU less than condition code */
+#define FPCR_INIT               0x00000000      /* no exceptions, rounding to nearest */
+/* CPU control registers */
+#define CPUP                    __SYSREG(0xc0000020, u16)       /* CPU pipeline register */
+#define CPUP_DWBD               0x0020          /* write buffer disable flag */
+#define CPUP_IPFD               0x0040          /* instruction prefetch disable flag */
+#define CPUP_EXM                0x0080          /* exception operation mode */
+#define CPUP_EXM_AM33V1         0x0000          /* - AM33 v1 exception mode */
+#define CPUP_EXM_AM33V2         0x0080          /* - AM33 v2 exception mode */
+#define CPUM                    __SYSREG(0xc0000040, u16)       /* CPU mode register */
+#define CPUM_SLEEP              0x0004          /* set to enter sleep state */
+#define CPUM_HALT               0x0008          /* set to enter halt state */
+#define CPUM_STOP               0x0010          /* set to enter stop state */
+#define CPUREV                  __SYSREGC(0xc0000050, u32)      /* CPU revision register */
+#define CPUREV_TYPE             0x0000000f      /* CPU type */
+#define CPUREV_TYPE_S           0
+#define CPUREV_TYPE_AM33V1      0x00000000      /* - AM33 V1 core, AM33/1.00 arch */
+#define CPUREV_TYPE_AM33V2      0x00000001      /* - AM33 V2 core, AM33/2.00 arch */
+#define CPUREV_TYPE_AM34V1      0x00000002      /* - AM34 V1 core, AM33/2.00 arch */
+#define CPUREV_REVISION         0x000000f0      /* CPU revision */
+#define CPUREV_REVISION_S       4
+#define CPUREV_ICWAY            0x00000f00      /* number of instruction cache ways */
+#define CPUREV_ICWAY_S          8
+#define CPUREV_ICSIZE           0x0000f000      /* instruction cache way size */
+#define CPUREV_ICSIZE_S         12
+#define CPUREV_DCWAY            0x000f0000      /* number of data cache ways */
+#define CPUREV_DCWAY_S          16
+#define CPUREV_DCSIZE           0x00f00000      /* data cache way size */
+#define CPUREV_DCSIZE_S         20
+#define CPUREV_FPUTYPE          0x0f000000      /* FPU core type */
+#define CPUREV_FPUTYPE_NONE     0x00000000      /* - no FPU core implemented */
+#define CPUREV_OCDCTG           0xf0000000      /* on-chip debug function category */
+#define DCR                     __SYSREG(0xc0000030, u16)       /* Debug control register */
+/* interrupt/exception control registers */
+#define IVAR0                   __SYSREG(0xc0000000, u16)       /* interrupt vector 0 */
+#define IVAR1                   __SYSREG(0xc0000004, u16)       /* interrupt vector 1 */
+#define IVAR2                   __SYSREG(0xc0000008, u16)       /* interrupt vector 2 */
+#define IVAR3                   __SYSREG(0xc000000c, u16)       /* interrupt vector 3 */
+#define IVAR4                   __SYSREG(0xc0000010, u16)       /* interrupt vector 4 */
+#define IVAR5                   __SYSREG(0xc0000014, u16)       /* interrupt vector 5 */
+#define IVAR6                   __SYSREG(0xc0000018, u16)       /* interrupt vector 6 */
+#define TBR                     __SYSREG(0xc0000024, u32)       /* Trap table base */
+#define TBR_TB                  0xff000000      /* table base address bits 31-24 */
+#define TBR_INT_CODE            0x00ffffff      /* interrupt code */
+#define DEAR                    __SYSREG(0xc0000038, u32)       /* Data access exception address */
+#define sISR                    __SYSREG(0xc0000044, u32)       /* Supervisor interrupt status */
+#define sISR_IRQICE             0x00000001      /* ICE interrupt */
+#define sISR_ISTEP              0x00000002      /* single step interrupt */
+#define sISR_MISSA              0x00000004      /* memory access address misalignment fault */
+#define sISR_UNIMP              0x00000008      /* unimplemented instruction execution fault */
+#define sISR_PIEXE              0x00000010      /* program interrupt */
+#define sISR_MEMERR             0x00000020      /* illegal memory access fault */
+#define sISR_IBREAK             0x00000040      /* instraction break interrupt */
+#define sISR_DBSRL              0x00000080      /* debug serial interrupt */
+#define sISR_PERIDB             0x00000100      /* peripheral debug interrupt */
+#define sISR_EXUNIMP            0x00000200      /* unimplemented ex-instruction execution fault */
+#define sISR_OBREAK             0x00000400      /* operand break interrupt */
+#define sISR_PRIV               0x00000800      /* privileged instruction execution fault */
+#define sISR_BUSERR             0x00001000      /* bus error fault */
+#define sISR_DBLFT              0x00002000      /* double fault */
+#define sISR_DBG                0x00008000      /* debug reserved interrupt */
+#define sISR_ITMISS             0x00010000      /* instruction TLB miss */
+#define sISR_DTMISS             0x00020000      /* data TLB miss */
+#define sISR_ITEX               0x00040000      /* instruction TLB access exception */
+#define sISR_DTEX               0x00080000      /* data TLB access exception */
+#define sISR_ILGIA              0x00100000      /* illegal instruction access exception */
+#define sISR_ILGDA              0x00200000      /* illegal data access exception */
+#define sISR_IOIA               0x00400000      /* internal I/O space instruction access excep */
+#define sISR_PRIVA              0x00800000      /* privileged space instruction access excep */
+#define sISR_PRIDA              0x01000000      /* privileged space data access excep */
+#define sISR_DISA               0x02000000      /* data space instruction access excep */
+#define sISR_SYSC               0x04000000      /* system call instruction excep */
+#define sISR_FPUD               0x08000000      /* FPU disabled excep */
+#define sISR_FPUUI              0x10000000      /* FPU unimplemented instruction excep */
+#define sISR_FPUOP              0x20000000      /* FPU operation excep */
+#define sISR_NE                 0x80000000      /* multiple synchronous exceptions excep */
+/* cache control registers */
+#define CHCTR                   __SYSREG(0xc0000070, u16)       /* cache control */
+#define CHCTR_ICEN              0x0001          /* instruction cache enable */
+#define CHCTR_DCEN              0x0002          /* data cache enable */
+#define CHCTR_ICBUSY            0x0004          /* instruction cache busy */
+#define CHCTR_DCBUSY            0x0008          /* data cache busy */
+#define CHCTR_ICINV             0x0010          /* instruction cache invalidate */
+#define CHCTR_DCINV             0x0020          /* data cache invalidate */
+#define CHCTR_DCWTMD            0x0040          /* data cache writing mode */
+#define CHCTR_DCWTMD_WRBACK     0x0000          /* - write back mode */
+#define CHCTR_DCWTMD_WRTHROUGH  0x0040          /* - write through mode */
+#define CHCTR_DCALMD            0x0080          /* data cache allocation mode */
+#define CHCTR_ICWMD             0x0f00          /* instruction cache way mode */
+#define CHCTR_DCWMD             0xf000          /* data cache way mode */
+/* MMU control registers */
+#define MMUCTR                  __SYSREG(0xc0000090, u32)       /* MMU control register */
+#define MMUCTR_IRP              0x0000003f      /* instruction TLB replace pointer */
+#define MMUCTR_ITE              0x00000040      /* instruction TLB enable */
+#define MMUCTR_IIV              0x00000080      /* instruction TLB invalidate */
+#define MMUCTR_ITL              0x00000700      /* instruction TLB lock pointer */
+#define MMUCTR_ITL_NOLOCK       0x00000000      /* - no lock */
+#define MMUCTR_ITL_LOCK0        0x00000100      /* - entry 0 locked */
+#define MMUCTR_ITL_LOCK0_1      0x00000200      /* - entry 0-1 locked */
+#define MMUCTR_ITL_LOCK0_3      0x00000300      /* - entry 0-3 locked */
+#define MMUCTR_ITL_LOCK0_7      0x00000400      /* - entry 0-7 locked */
+#define MMUCTR_ITL_LOCK0_15     0x00000500      /* - entry 0-15 locked */
+#define MMUCTR_CE               0x00008000      /* cacheable bit enable */
+#define MMUCTR_DRP              0x003f0000      /* data TLB replace pointer */
+#define MMUCTR_DTE              0x00400000      /* data TLB enable */
+#define MMUCTR_DIV              0x00800000      /* data TLB invalidate */
+#define MMUCTR_DTL              0x07000000      /* data TLB lock pointer */
+#define MMUCTR_DTL_NOLOCK       0x00000000      /* - no lock */
+#define MMUCTR_DTL_LOCK0        0x01000000      /* - entry 0 locked */
+#define MMUCTR_DTL_LOCK0_1      0x02000000      /* - entry 0-1 locked */
+#define MMUCTR_DTL_LOCK0_3      0x03000000      /* - entry 0-3 locked */
+#define MMUCTR_DTL_LOCK0_7      0x04000000      /* - entry 0-7 locked */
+#define MMUCTR_DTL_LOCK0_15     0x05000000      /* - entry 0-15 locked */
+#define PIDR                    __SYSREG(0xc0000094, u16)       /* PID register */
+#define PIDR_PID                0x00ff          /* process identifier */
+#define PTBR                    __SYSREG(0xc0000098, unsigned long) /* Page table base register */
+#define IPTEL                   __SYSREG(0xc00000a0, u32)       /* instruction TLB entry */
+#define DPTEL                   __SYSREG(0xc00000b0, u32)       /* data TLB entry */
+#define xPTEL_V                 0x00000001      /* TLB entry valid */
+#define xPTEL_UNUSED1           0x00000002      /* unused bit */
+#define xPTEL_UNUSED2           0x00000004      /* unused bit */
+#define xPTEL_C                 0x00000008      /* cached if set */
+#define xPTEL_PV                0x00000010      /* page valid */
+#define xPTEL_D                 0x00000020      /* dirty */
+#define xPTEL_PR                0x000001c0      /* page protection */
+#define xPTEL_PR_ROK            0x00000000      /* - R/O kernel */
+#define xPTEL_PR_RWK            0x00000100      /* - R/W kernel */
+#define xPTEL_PR_ROK_ROU        0x00000080      /* - R/O kernel and R/O user */
+#define xPTEL_PR_RWK_ROU        0x00000180      /* - R/W kernel and R/O user */
+#define xPTEL_PR_RWK_RWU        0x000001c0      /* - R/W kernel and R/W user */
+#define xPTEL_G                 0x00000200      /* global (use PID if 0) */
+#define xPTEL_PS                0x00000c00      /* page size */
+#define xPTEL_PS_4Kb            0x00000000      /* - 4Kb page */
+#define xPTEL_PS_128Kb          0x00000400      /* - 128Kb page */
+#define xPTEL_PS_1Kb            0x00000800      /* - 1Kb page */
+#define xPTEL_PS_4Mb            0x00000c00      /* - 4Mb page */
+#define xPTEL_PPN               0xfffff006      /* physical page number */
+#define xPTEL_V_BIT             0       /* bit numbers corresponding to above masks */
+#define xPTEL_UNUSED1_BIT       1
+#define xPTEL_UNUSED2_BIT       2
+#define xPTEL_C_BIT             3
+#define xPTEL_PV_BIT            4
+#define xPTEL_D_BIT             5
+#define xPTEL_G_BIT             9
+#define IPTEU                   __SYSREG(0xc00000a4, u32)       /* instruction TLB virtual addr */
+#define DPTEU                   __SYSREG(0xc00000b4, u32)       /* data TLB virtual addr */
+#define xPTEU_VPN               0xfffffc00      /* virtual page number */
+#define xPTEU_PID               0x000000ff      /* process identifier to which applicable */
+#define IPTEL2                  __SYSREG(0xc00000a8, u32)       /* instruction TLB entry */
+#define DPTEL2                  __SYSREG(0xc00000b8, u32)       /* data TLB entry */
+#define xPTEL2_V                0x00000001      /* TLB entry valid */
+#define xPTEL2_C                0x00000002      /* cacheable */
+#define xPTEL2_PV               0x00000004      /* page valid */
+#define xPTEL2_D                0x00000008      /* dirty */
+#define xPTEL2_PR               0x00000070      /* page protection */
+#define xPTEL2_PR_ROK           0x00000000      /* - R/O kernel */
+#define xPTEL2_PR_RWK           0x00000040      /* - R/W kernel */
+#define xPTEL2_PR_ROK_ROU       0x00000020      /* - R/O kernel and R/O user */
+#define xPTEL2_PR_RWK_ROU       0x00000060      /* - R/W kernel and R/O user */
+#define xPTEL2_PR_RWK_RWU       0x00000070      /* - R/W kernel and R/W user */
+#define xPTEL2_G                0x00000080      /* global (use PID if 0) */
+#define xPTEL2_PS               0x00000300      /* page size */
+#define xPTEL2_PS_4Kb           0x00000000      /* - 4Kb page */
+#define xPTEL2_PS_128Kb         0x00000100      /* - 128Kb page */
+#define xPTEL2_PS_1Kb           0x00000200      /* - 1Kb page */
+#define xPTEL2_PS_4Mb           0x00000300      /* - 4Mb page */
+#define xPTEL2_PPN              0xfffffc00      /* physical page number */
+#define MMUFCR                  __SYSREGC(0xc000009c, u32)      /* MMU exception cause */
+#define MMUFCR_IFC              __SYSREGC(0xc000009c, u16)      /* MMU instruction excep cause */
+#define MMUFCR_DFC              __SYSREGC(0xc000009e, u16)      /* MMU data exception cause */
+#define MMUFCR_xFC_TLBMISS      0x0001          /* TLB miss flag */
+#define MMUFCR_xFC_INITWR       0x0002          /* initial write excep flag */
+#define MMUFCR_xFC_PGINVAL      0x0004          /* page invalid excep flag */
+#define MMUFCR_xFC_PROTVIOL     0x0008          /* protection violation excep flag */
+#define MMUFCR_xFC_ACCESS       0x0010          /* access level flag */
+#define MMUFCR_xFC_ACCESS_USR   0x0000          /* - user mode */
+#define MMUFCR_xFC_ACCESS_SR    0x0010          /* - supervisor mode */
+#define MMUFCR_xFC_TYPE         0x0020          /* access type flag */
+#define MMUFCR_xFC_TYPE_READ    0x0000          /* - read */
+#define MMUFCR_xFC_TYPE_WRITE   0x0020          /* - write */
+#define MMUFCR_xFC_PR           0x01c0          /* page protection flag */
+#define MMUFCR_xFC_PR_ROK       0x0000          /* - R/O kernel */
+#define MMUFCR_xFC_PR_RWK       0x0100          /* - R/W kernel */
+#define MMUFCR_xFC_PR_ROK_ROU   0x0080          /* - R/O kernel and R/O user */
+#define MMUFCR_xFC_PR_RWK_ROU   0x0180          /* - R/W kernel and R/O user */
+#define MMUFCR_xFC_PR_RWK_RWU   0x01c0          /* - R/W kernel and R/W user */
+#define MMUFCR_xFC_ILLADDR      0x0200          /* illegal address excep flag */
+#endif /* __KERNEL__ */
+#endif /* _ASM_CPU_REGS_H */
diff --git a/arch/mn10300/include/asm/cputime.h b/arch/mn10300/include/asm/cputime.h
new file mode 100644
index 000000000000..6d68ad7e0ea3
--- /dev/null
+++ b/arch/mn10300/include/asm/cputime.h
@@ -0,0 +1 @@
+#include <asm-generic/cputime.h>
diff --git a/arch/mn10300/include/asm/current.h b/arch/mn10300/include/asm/current.h
new file mode 100644
index 000000000000..ca6027d83743
--- /dev/null
+++ b/arch/mn10300/include/asm/current.h
@@ -0,0 +1,37 @@
+/* MN10300 Current task structure accessor
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_CURRENT_H
+#define _ASM_CURRENT_H
+#include <linux/thread_info.h>
+/*
+ * dedicate E2 to keeping the current task pointer
+ */
+#ifdef CONFIG_MN10300_CURRENT_IN_E2
+register struct task_struct *const current asm("e2") __attribute__((used));
+#define get_current() current
+extern struct task_struct *__current;
+#else
+static inline __attribute__((const))
+struct task_struct *get_current(void)
+{
+        return current_thread_info()->task;
+}
+#define current get_current()
+#endif
+#endif /* _ASM_CURRENT_H */
diff --git a/arch/mn10300/include/asm/delay.h b/arch/mn10300/include/asm/delay.h
new file mode 100644
index 000000000000..34517b359399
--- /dev/null
+++ b/arch/mn10300/include/asm/delay.h
@@ -0,0 +1,19 @@
+/* MN10300 Uninterruptible delay routines
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DELAY_H
+#define _ASM_DELAY_H
+extern void __udelay(unsigned long usecs);
+extern void __delay(unsigned long loops);
+#define udelay(n) __udelay(n)
+#endif /* _ASM_DELAY_H */
diff --git a/arch/mn10300/include/asm/device.h b/arch/mn10300/include/asm/device.h
new file mode 100644
index 000000000000..f0a4c256403b
--- /dev/null
+++ b/arch/mn10300/include/asm/device.h
@@ -0,0 +1 @@
+#include <asm-generic/device.h>
diff --git a/arch/mn10300/include/asm/div64.h b/arch/mn10300/include/asm/div64.h
new file mode 100644
index 000000000000..3a8329b3e869
--- /dev/null
+++ b/arch/mn10300/include/asm/div64.h
@@ -0,0 +1,100 @@
+/* MN10300 64-bit division
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DIV64
+#define _ASM_DIV64
+#include <linux/types.h>
+extern void ____unhandled_size_in_do_div___(void);
+/*
+ * divide n by base, leaving the result in n and returning the remainder
+ * - we can do this quite efficiently on the MN10300 by cascading the divides
+ *   through the MDR register
+ */
+#define do_div(n, base)                                                 \
+({                                                                      \
+        unsigned __rem = 0;                                             \
+        if (sizeof(n) <= 4) {                                           \
+                asm("mov        %1,mdr  \n"                             \
+                    "divu       %2,%0   \n"                             \
+                    "mov        mdr,%1  \n"                             \
+                    : "+r"(n), "=d"(__rem)                              \
+                    : "r"(base), "1"(__rem)                             \
+                    : "cc"                                              \
+                    );                                                  \
+        } else if (sizeof(n) <= 8) {                                    \
+                union {                                                 \
+                        unsigned long long l;                           \
+                        u32 w[2];                                       \
+                } __quot;                                               \
+                __quot.l = n;                                           \
+                asm("mov        %0,mdr  \n"     /* MDR = 0 */           \
+                    "divu       %3,%1   \n"                             \
+                    /* __quot.MSL = __div.MSL / base, */                \
+                    /* MDR = MDR:__div.MSL % base */                    \
+                    "divu       %3,%2   \n"                             \
+                    /* __quot.LSL = MDR:__div.LSL / base, */            \
+                    /* MDR = MDR:__div.LSL % base */                    \
+                    "mov        mdr,%0  \n"                             \
+                    : "=d"(__rem), "=r"(__quot.w[1]), "=r"(__quot.w[0]) \
+                    : "r"(base), "0"(__rem), "1"(__quot.w[1]),          \
+                      "2"(__quot.w[0])                                  \
+                    : "cc"                                              \
+                    );                                                  \
+                n = __quot.l;                                           \
+        } else {                                                        \
+                ____unhandled_size_in_do_div___();                      \
+        }                                                               \
+        __rem;                                                          \
+})
+/*
+ * do an unsigned 32-bit multiply and divide with intermediate 64-bit product
+ * so as not to lose accuracy
+ * - we use the MDR register to hold the MSW of the product
+ */
+static inline __attribute__((const))
+unsigned __muldiv64u(unsigned val, unsigned mult, unsigned div)
+{
+        unsigned result;
+        asm("mulu       %2,%0   \n"     /* MDR:val = val*mult */
+            "divu       %3,%0   \n"     /* val = MDR:val/div;
+                                         * MDR = MDR:val%div */
+            : "=r"(result)
+            : "0"(val), "ir"(mult), "r"(div)
+            );
+        return result;
+}
+/*
+ * do a signed 32-bit multiply and divide with intermediate 64-bit product so
+ * as not to lose accuracy
+ * - we use the MDR register to hold the MSW of the product
+ */
+static inline __attribute__((const))
+signed __muldiv64s(signed val, signed mult, signed div)
+{
+        signed result;
+        asm("mul        %2,%0   \n"     /* MDR:val = val*mult */
+            "div        %3,%0   \n"     /* val = MDR:val/div;
+                                         * MDR = MDR:val%div */
+            : "=r"(result)
+            : "0"(val), "ir"(mult), "r"(div)
+            );
+        return result;
+}
+#endif /* _ASM_DIV64 */
diff --git a/arch/mn10300/include/asm/dma-mapping.h b/arch/mn10300/include/asm/dma-mapping.h
new file mode 100644
index 000000000000..ccae8f6c6326
--- /dev/null
+++ b/arch/mn10300/include/asm/dma-mapping.h
@@ -0,0 +1,234 @@
+/* DMA mapping routines for the MN10300 arch
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DMA_MAPPING_H
+#define _ASM_DMA_MAPPING_H
+#include <linux/mm.h>
+#include <linux/scatterlist.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+extern void *dma_alloc_coherent(struct device *dev, size_t size,
+                                dma_addr_t *dma_handle, int flag);
+extern void dma_free_coherent(struct device *dev, size_t size,
+                              void *vaddr, dma_addr_t dma_handle);
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent((d), (s), (h), (f))
+#define dma_free_noncoherent(d, s, v, h)  dma_free_coherent((d), (s), (v), (h))
+/*
+ * Map a single buffer of the indicated size for DMA in streaming mode.  The
+ * 32-bit bus address to use is returned.
+ *
+ * Once the device is given the dma address, the device owns this memory until
+ * either pci_unmap_single or pci_dma_sync_single is performed.
+ */
+static inline
+dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
+                          enum dma_data_direction direction)
+{
+        BUG_ON(direction == DMA_NONE);
+        mn10300_dcache_flush_inv();
+        return virt_to_bus(ptr);
+}
+/*
+ * Unmap a single streaming mode DMA translation.  The dma_addr and size must
+ * match what was provided for in a previous pci_map_single call.  All other
+ * usages are undefined.
+ *
+ * After this call, reads by the cpu to the buffer are guarenteed to see
+ * whatever the device wrote there.
+ */
+static inline
+void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+                      enum dma_data_direction direction)
+{
+        BUG_ON(direction == DMA_NONE);
+}
+/*
+ * Map a set of buffers described by scatterlist in streaming mode for DMA.
+ * This is the scather-gather version of the above pci_map_single interface.
+ * Here the scatter gather list elements are each tagged with the appropriate
+ * dma address and length.  They are obtained via sg_dma_{address,length}(SG).
+ *
+ * NOTE: An implementation may be able to use a smaller number of DMA
+ *       address/length pairs than there are SG table elements.  (for example
+ *       via virtual mapping capabilities) The routine returns the number of
+ *       addr/length pairs actually used, at most nents.
+ *
+ * Device ownership issues as mentioned above for pci_map_single are the same
+ * here.
+ */
+static inline
+int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
+               enum dma_data_direction direction)
+{
+        struct scatterlist *sg;
+        int i;
+        BUG_ON(!valid_dma_direction(direction));
+        WARN_ON(nents == 0 || sglist[0].length == 0);
+        for_each_sg(sglist, sg, nents, i) {
+                BUG_ON(!sg_page(sg));
+                sg->dma_address = sg_phys(sg);
+        }
+        mn10300_dcache_flush_inv();
+        return nents;
+}
+/*
+ * Unmap a set of streaming mode DMA translations.
+ * Again, cpu read rules concerning calls here are the same as for
+ * pci_unmap_single() above.
+ */
+static inline
+void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+                  enum dma_data_direction direction)
+{
+        BUG_ON(!valid_dma_direction(direction));
+}
+/*
+ * pci_{map,unmap}_single_page maps a kernel page to a dma_addr_t. identical
+ * to pci_map_single, but takes a struct page instead of a virtual address
+ */
+static inline
+dma_addr_t dma_map_page(struct device *dev, struct page *page,
+                        unsigned long offset, size_t size,
+                        enum dma_data_direction direction)
+{
+        BUG_ON(direction == DMA_NONE);
+        return page_to_bus(page) + offset;
+}
+static inline
+void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+                    enum dma_data_direction direction)
+{
+        BUG_ON(direction == DMA_NONE);
+}
+/*
+ * Make physical memory consistent for a single streaming mode DMA translation
+ * after a transfer.
+ *
+ * If you perform a pci_map_single() but wish to interrogate the buffer using
+ * the cpu, yet do not wish to teardown the PCI dma mapping, you must call this
+ * function before doing so.  At the next point you give the PCI dma address
+ * back to the card, the device again owns the buffer.
+ */
+static inline
+void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+                             size_t size, enum dma_data_direction direction)
+{
+}
+static inline
+void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
+                                size_t size, enum dma_data_direction direction)
+{
+        mn10300_dcache_flush_inv();
+}
+static inline
+void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
+                                   unsigned long offset, size_t size,
+                                   enum dma_data_direction direction)
+{
+}
+static inline void
+dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
+                                 unsigned long offset, size_t size,
+                                 enum dma_data_direction direction)
+{
+        mn10300_dcache_flush_inv();
+}
+/*
+ * Make physical memory consistent for a set of streaming mode DMA translations
+ * after a transfer.
+ *
+ * The same as pci_dma_sync_single but for a scatter-gather list, same rules
+ * and usage.
+ */
+static inline
+void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+                         int nelems, enum dma_data_direction direction)
+{
+}
+static inline
+void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+                            int nelems, enum dma_data_direction direction)
+{
+        mn10300_dcache_flush_inv();
+}
+static inline
+int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+        return 0;
+}
+/*
+ * Return whether the given PCI device DMA address mask can be supported
+ * properly.  For example, if your device can only drive the low 24-bits during
+ * PCI bus mastering, then you would pass 0x00ffffff as the mask to this
+ * function.
+ */
+static inline
+int dma_supported(struct device *dev, u64 mask)
+{
+        /*
+         * we fall back to GFP_DMA when the mask isn't all 1s, so we can't
+         * guarantee allocations that must be within a tighter range than
+         * GFP_DMA
+         */
+        if (mask < 0x00ffffff)
+                return 0;
+        return 1;
+}
+static inline
+int dma_set_mask(struct device *dev, u64 mask)
+{
+        if (!dev->dma_mask || !dma_supported(dev, mask))
+                return -EIO;
+        *dev->dma_mask = mask;
+        return 0;
+}
+static inline
+int dma_get_cache_alignment(void)
+{
+        return 1 << L1_CACHE_SHIFT;
+}
+#define dma_is_consistent(d)    (1)
+static inline
+void dma_cache_sync(void *vaddr, size_t size,
+                    enum dma_data_direction direction)
+{
+        mn10300_dcache_flush_inv();
+}
+#endif
diff --git a/arch/mn10300/include/asm/dma.h b/arch/mn10300/include/asm/dma.h
new file mode 100644
index 000000000000..098df2e617ab
--- /dev/null
+++ b/arch/mn10300/include/asm/dma.h
@@ -0,0 +1,118 @@
+/* MN10300 ISA DMA handlers and definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DMA_H
+#define _ASM_DMA_H
+#include <asm/system.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+#undef MAX_DMA_CHANNELS         /* switch off linux/kernel/dma.c */
+#define MAX_DMA_ADDRESS         0xbfffffff
+extern spinlock_t dma_spin_lock;
+static inline unsigned long claim_dma_lock(void)
+{
+        unsigned long flags;
+        spin_lock_irqsave(&dma_spin_lock, flags);
+        return flags;
+}
+static inline void release_dma_lock(unsigned long flags)
+{
+        spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+/* enable/disable a specific DMA channel */
+static inline void enable_dma(unsigned int dmanr)
+{
+}
+static inline void disable_dma(unsigned int dmanr)
+{
+}
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while holding the DMA lock ! ---
+ */
+static inline void clear_dma_ff(unsigned int dmanr)
+{
+}
+/* set mode (above) for a specific DMA channel */
+static inline void set_dma_mode(unsigned int dmanr, char mode)
+{
+}
+/* Set only the page register bits of the transfer address.
+ * This is used for successive transfers when we know the contents of
+ * the lower 16 bits of the DMA current address register, but a 64k boundary
+ * may have been crossed.
+ */
+static inline void set_dma_page(unsigned int dmanr, char pagenr)
+{
+}
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static inline void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+}
+/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static inline void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+}
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static inline int get_dma_residue(unsigned int dmanr)
+{
+        return 0;
+}
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char *device_id);
+extern void free_dma(unsigned int dmanr);
+/* From PCI */
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy    (0)
+#endif
+#endif /* _ASM_DMA_H */
diff --git a/arch/mn10300/include/asm/dmactl-regs.h b/arch/mn10300/include/asm/dmactl-regs.h
new file mode 100644
index 000000000000..58a199da0f4a
--- /dev/null
+++ b/arch/mn10300/include/asm/dmactl-regs.h
@@ -0,0 +1,101 @@
+/* MN10300 on-board DMA controller registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DMACTL_REGS_H
+#define _ASM_DMACTL_REGS_H
+#include <asm/cpu-regs.h>
+#ifdef __KERNEL__
+/* DMA registers */
+#define DMxCTR(N)               __SYSREG(0xd2000000 + ((N) * 0x100), u32)       /* control reg */
+#define DMxCTR_BG               0x0000001f      /* transfer request source */
+#define DMxCTR_BG_SOFT          0x00000000      /* - software source */
+#define DMxCTR_BG_SC0TX         0x00000002      /* - serial port 0 transmission */
+#define DMxCTR_BG_SC0RX         0x00000003      /* - serial port 0 reception */
+#define DMxCTR_BG_SC1TX         0x00000004      /* - serial port 1 transmission */
+#define DMxCTR_BG_SC1RX         0x00000005      /* - serial port 1 reception */
+#define DMxCTR_BG_SC2TX         0x00000006      /* - serial port 2 transmission */
+#define DMxCTR_BG_SC2RX         0x00000007      /* - serial port 2 reception */
+#define DMxCTR_BG_TM0UFLOW      0x00000008      /* - timer 0 underflow */
+#define DMxCTR_BG_TM1UFLOW      0x00000009      /* - timer 1 underflow */
+#define DMxCTR_BG_TM2UFLOW      0x0000000a      /* - timer 2 underflow */
+#define DMxCTR_BG_TM3UFLOW      0x0000000b      /* - timer 3 underflow */
+#define DMxCTR_BG_TM6ACMPCAP    0x0000000c      /* - timer 6A compare/capture */
+#define DMxCTR_BG_AFE           0x0000000d      /* - analogue front-end interrupt source */
+#define DMxCTR_BG_ADC           0x0000000e      /* - A/D conversion end interrupt source */
+#define DMxCTR_BG_IRDA          0x0000000f      /* - IrDA interrupt source */
+#define DMxCTR_BG_RTC           0x00000010      /* - RTC interrupt source */
+#define DMxCTR_BG_XIRQ0         0x00000011      /* - XIRQ0 pin interrupt source */
+#define DMxCTR_BG_XIRQ1         0x00000012      /* - XIRQ1 pin interrupt source */
+#define DMxCTR_BG_XDMR0         0x00000013      /* - external request 0 source (XDMR0 pin) */
+#define DMxCTR_BG_XDMR1         0x00000014      /* - external request 1 source (XDMR1 pin) */
+#define DMxCTR_SAM              0x000000e0      /* DMA transfer src addr mode */
+#define DMxCTR_SAM_INCR         0x00000000      /* - increment */
+#define DMxCTR_SAM_DECR         0x00000020      /* - decrement */
+#define DMxCTR_SAM_FIXED        0x00000040      /* - fixed */
+#define DMxCTR_DAM              0x00000000      /* DMA transfer dest addr mode */
+#define DMxCTR_DAM_INCR         0x00000000      /* - increment */
+#define DMxCTR_DAM_DECR         0x00000100      /* - decrement */
+#define DMxCTR_DAM_FIXED        0x00000200      /* - fixed */
+#define DMxCTR_TM               0x00001800      /* DMA transfer mode */
+#define DMxCTR_TM_BATCH         0x00000000      /* - batch transfer */
+#define DMxCTR_TM_INTERM        0x00001000      /* - intermittent transfer */
+#define DMxCTR_UT               0x00006000      /* DMA transfer unit */
+#define DMxCTR_UT_1             0x00000000      /* - 1 byte */
+#define DMxCTR_UT_2             0x00002000      /* - 2 byte */
+#define DMxCTR_UT_4             0x00004000      /* - 4 byte */
+#define DMxCTR_UT_16            0x00006000      /* - 16 byte */
+#define DMxCTR_TEN              0x00010000      /* DMA channel transfer enable */
+#define DMxCTR_RQM              0x00060000      /* external request input source mode */
+#define DMxCTR_RQM_FALLEDGE     0x00000000      /* - falling edge */
+#define DMxCTR_RQM_RISEEDGE     0x00020000      /* - rising edge */
+#define DMxCTR_RQM_LOLEVEL      0x00040000      /* - low level */
+#define DMxCTR_RQM_HILEVEL      0x00060000      /* - high level */
+#define DMxCTR_RQF              0x01000000      /* DMA transfer request flag */
+#define DMxCTR_XEND             0x80000000      /* DMA transfer end flag */
+#define DMxSRC(N)               __SYSREG(0xd2000004 + ((N) * 0x100), u32)       /* control reg */
+#define DMxDST(N)               __SYSREG(0xd2000008 + ((N) * 0x100), u32)       /* src addr reg */
+#define DMxSIZ(N)               __SYSREG(0xd200000c + ((N) * 0x100), u32)       /* dest addr reg */
+#define DMxSIZ_CT               0x000fffff      /* number of bytes to transfer */
+#define DMxCYC(N)               __SYSREG(0xd2000010 + ((N) * 0x100), u32)       /* intermittent
+                                                                                 * size reg */
+#define DMxCYC_CYC              0x000000ff      /* number of interrmittent transfers -1 */
+#define DM0IRQ                  16              /* DMA channel 0 complete IRQ */
+#define DM1IRQ                  17              /* DMA channel 1 complete IRQ */
+#define DM2IRQ                  18              /* DMA channel 2 complete IRQ */
+#define DM3IRQ                  19              /* DMA channel 3 complete IRQ */
+#define DM0ICR                  GxICR(DM0IRQ)   /* DMA channel 0 complete intr ctrl reg */
+#define DM1ICR                  GxICR(DM0IR1)   /* DMA channel 1 complete intr ctrl reg */
+#define DM2ICR                  GxICR(DM0IR2)   /* DMA channel 2 complete intr ctrl reg */
+#define DM3ICR                  GxICR(DM0IR3)   /* DMA channel 3 complete intr ctrl reg */
+#ifndef __ASSEMBLY__
+struct mn10300_dmactl_regs {
+        u32             ctr;
+        const void      *src;
+        void            *dst;
+        u32             siz;
+        u32             cyc;
+} __attribute__((aligned(0x100)));
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_DMACTL_REGS_H */
diff --git a/arch/mn10300/include/asm/elf.h b/arch/mn10300/include/asm/elf.h
new file mode 100644
index 000000000000..bf09f8bb392e
--- /dev/null
+++ b/arch/mn10300/include/asm/elf.h
@@ -0,0 +1,147 @@
+/* MN10300 ELF constant and register definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_ELF_H
+#define _ASM_ELF_H
+#include <linux/utsname.h>
+#include <asm/ptrace.h>
+#include <asm/user.h>
+/*
+ * AM33 relocations
+ */
+#define R_MN10300_NONE          0       /* No reloc.  */
+#define R_MN10300_32            1       /* Direct 32 bit.  */
+#define R_MN10300_16            2       /* Direct 16 bit.  */
+#define R_MN10300_8             3       /* Direct 8 bit.  */
+#define R_MN10300_PCREL32       4       /* PC-relative 32-bit.  */
+#define R_MN10300_PCREL16       5       /* PC-relative 16-bit signed.  */
+#define R_MN10300_PCREL8        6       /* PC-relative 8-bit signed.  */
+#define R_MN10300_24            9       /* Direct 24 bit.  */
+#define R_MN10300_RELATIVE      23      /* Adjust by program base.  */
+/*
+ * ELF register definitions..
+ */
+typedef unsigned long elf_greg_t;
+#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+#define ELF_NFPREG 32
+typedef float elf_fpreg_t;
+typedef struct {
+        elf_fpreg_t     fpregs[ELF_NFPREG];
+        u_int32_t       fpcr;
+} elf_fpregset_t;
+extern int dump_fpu(struct pt_regs *, elf_fpregset_t *);
+/*
+ * This is used to ensure we don't load something for the wrong architecture
+ */
+#define elf_check_arch(x) \
+        (((x)->e_machine == EM_CYGNUS_MN10300) ||       \
+         ((x)->e_machine == EM_MN10300))
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS       ELFCLASS32
+#define ELF_DATA        ELFDATA2LSB
+#define ELF_ARCH        EM_MN10300
+/*
+ * ELF process initialiser
+ */
+#define ELF_PLAT_INIT(_r, load_addr)                                    \
+do {                                                                    \
+        struct pt_regs *_ur = current->thread.uregs;                    \
+        _ur->a3   = 0;  _ur->a2   = 0;  _ur->d3   = 0;  _ur->d2   = 0;  \
+        _ur->mcvf = 0;  _ur->mcrl = 0;  _ur->mcrh = 0;  _ur->mdrq = 0;  \
+        _ur->e1   = 0;  _ur->e0   = 0;  _ur->e7   = 0;  _ur->e6   = 0;  \
+        _ur->e5   = 0;  _ur->e4   = 0;  _ur->e3   = 0;  _ur->e2   = 0;  \
+        _ur->lar  = 0;  _ur->lir  = 0;  _ur->mdr  = 0;                  \
+        _ur->a1   = 0;  _ur->a0   = 0;  _ur->d1   = 0;  _ur->d0   = 0;  \
+} while (0)
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE       4096
+/*
+ * This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+ * use of this is to invoke "./ld.so someprog" to test out a new version of
+ * the loader.  We need to make sure that it is out of the way of the program
+ * that it will "exec", and that there is sufficient room for the brk.
+ * - must clear the VMALLOC area
+ */
+#define ELF_ET_DYN_BASE         0x04000000
+/*
+ * regs is struct pt_regs, pr_reg is elf_gregset_t (which is
+ * now struct user_regs, they are different)
+ * - ELF_CORE_COPY_REGS has been guessed, and may be wrong
+ */
+#define ELF_CORE_COPY_REGS(pr_reg, regs)        \
+do {                                            \
+        pr_reg[0]       = regs->a3;             \
+        pr_reg[1]       = regs->a2;             \
+        pr_reg[2]       = regs->d3;             \
+        pr_reg[3]       = regs->d2;             \
+        pr_reg[4]       = regs->mcvf;           \
+        pr_reg[5]       = regs->mcrl;           \
+        pr_reg[6]       = regs->mcrh;           \
+        pr_reg[7]       = regs->mdrq;           \
+        pr_reg[8]       = regs->e1;             \
+        pr_reg[9]       = regs->e0;             \
+        pr_reg[10]      = regs->e7;             \
+        pr_reg[11]      = regs->e6;             \
+        pr_reg[12]      = regs->e5;             \
+        pr_reg[13]      = regs->e4;             \
+        pr_reg[14]      = regs->e3;             \
+        pr_reg[15]      = regs->e2;             \
+        pr_reg[16]      = regs->sp;             \
+        pr_reg[17]      = regs->lar;            \
+        pr_reg[18]      = regs->lir;            \
+        pr_reg[19]      = regs->mdr;            \
+        pr_reg[20]      = regs->a1;             \
+        pr_reg[21]      = regs->a0;             \
+        pr_reg[22]      = regs->d1;             \
+        pr_reg[23]      = regs->d0;             \
+        pr_reg[24]      = regs->orig_d0;        \
+        pr_reg[25]      = regs->epsw;           \
+        pr_reg[26]      = regs->pc;             \
+} while (0);
+/*
+ * This yields a mask that user programs can use to figure out what
+ * instruction set this CPU supports.  This could be done in user space,
+ * but it's not easy, and we've already done it here.
+ */
+#define ELF_HWCAP       (0)
+/*
+ * This yields a string that ld.so will use to load implementation
+ * specific libraries for optimization.  This is more specific in
+ * intent than poking at uname or /proc/cpuinfo.
+ *
+ * For the moment, we have only optimizations for the Intel generations,
+ * but that could change...
+ */
+#define ELF_PLATFORM  (NULL)
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+#endif
+#endif /* _ASM_ELF_H */
diff --git a/arch/mn10300/include/asm/emergency-restart.h b/arch/mn10300/include/asm/emergency-restart.h
new file mode 100644
index 000000000000..3711bd9d50bd
--- /dev/null
+++ b/arch/mn10300/include/asm/emergency-restart.h
@@ -0,0 +1 @@
+#include <asm-generic/emergency-restart.h>
diff --git a/arch/mn10300/include/asm/errno.h b/arch/mn10300/include/asm/errno.h
new file mode 100644
index 000000000000..4c82b503d92f
--- /dev/null
+++ b/arch/mn10300/include/asm/errno.h
@@ -0,0 +1 @@
+#include <asm-generic/errno.h>
diff --git a/arch/mn10300/include/asm/exceptions.h b/arch/mn10300/include/asm/exceptions.h
new file mode 100644
index 000000000000..fa16466ef3f9
--- /dev/null
+++ b/arch/mn10300/include/asm/exceptions.h
@@ -0,0 +1,121 @@
+/* MN10300 Microcontroller core exceptions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_EXCEPTIONS_H
+#define _ASM_EXCEPTIONS_H
+#include <linux/linkage.h>
+/*
+ * define the breakpoint instruction opcode to use
+ * - note that the JTAG unit steals 0xFF, so we want to avoid that if we can
+ *   (can use 0xF7)
+ */
+#define GDBSTUB_BKPT            0xFF
+#ifndef __ASSEMBLY__
+/*
+ * enumeration of exception codes (as extracted from TBR MSW)
+ */
+enum exception_code {
+        EXCEP_RESET             = 0x000000,     /* reset */
+        /* MMU exceptions */
+        EXCEP_ITLBMISS          = 0x000100,     /* instruction TLB miss */
+        EXCEP_DTLBMISS          = 0x000108,     /* data TLB miss */
+        EXCEP_IAERROR           = 0x000110,     /* instruction address */
+        EXCEP_DAERROR           = 0x000118,     /* data address */
+        /* system exceptions */
+        EXCEP_TRAP              = 0x000128,     /* program interrupt (PI instruction) */
+        EXCEP_ISTEP             = 0x000130,     /* single step */
+        EXCEP_IBREAK            = 0x000150,     /* instruction breakpoint */
+        EXCEP_OBREAK            = 0x000158,     /* operand breakpoint */
+        EXCEP_PRIVINS           = 0x000160,     /* privileged instruction execution */
+        EXCEP_UNIMPINS          = 0x000168,     /* unimplemented instruction execution */
+        EXCEP_UNIMPEXINS        = 0x000170,     /* unimplemented extended instruction execution */
+        EXCEP_MEMERR            = 0x000178,     /* illegal memory access */
+        EXCEP_MISALIGN          = 0x000180,     /* misalignment */
+        EXCEP_BUSERROR          = 0x000188,     /* bus error */
+        EXCEP_ILLINSACC         = 0x000190,     /* illegal instruction access */
+        EXCEP_ILLDATACC         = 0x000198,     /* illegal data access */
+        EXCEP_IOINSACC          = 0x0001a0,     /* I/O space instruction access */
+        EXCEP_PRIVINSACC        = 0x0001a8,     /* privileged space instruction access */
+        EXCEP_PRIVDATACC        = 0x0001b0,     /* privileged space data access */
+        EXCEP_DATINSACC         = 0x0001b8,     /* data space instruction access */
+        EXCEP_DOUBLE_FAULT      = 0x000200,     /* double fault */
+        /* FPU exceptions */
+        EXCEP_FPU_DISABLED      = 0x0001c0,     /* FPU disabled */
+        EXCEP_FPU_UNIMPINS      = 0x0001c8,     /* FPU unimplemented operation */
+        EXCEP_FPU_OPERATION     = 0x0001d0,     /* FPU operation */
+        /* interrupts */
+        EXCEP_WDT               = 0x000240,     /* watchdog timer overflow */
+        EXCEP_NMI               = 0x000248,     /* non-maskable interrupt */
+        EXCEP_IRQ_LEVEL0        = 0x000280,     /* level 0 maskable interrupt */
+        EXCEP_IRQ_LEVEL1        = 0x000288,     /* level 1 maskable interrupt */
+        EXCEP_IRQ_LEVEL2        = 0x000290,     /* level 2 maskable interrupt */
+        EXCEP_IRQ_LEVEL3        = 0x000298,     /* level 3 maskable interrupt */
+        EXCEP_IRQ_LEVEL4        = 0x0002a0,     /* level 4 maskable interrupt */
+        EXCEP_IRQ_LEVEL5        = 0x0002a8,     /* level 5 maskable interrupt */
+        EXCEP_IRQ_LEVEL6        = 0x0002b0,     /* level 6 maskable interrupt */
+        /* system calls */
+        EXCEP_SYSCALL0          = 0x000300,     /* system call 0 */
+        EXCEP_SYSCALL1          = 0x000308,     /* system call 1 */
+        EXCEP_SYSCALL2          = 0x000310,     /* system call 2 */
+        EXCEP_SYSCALL3          = 0x000318,     /* system call 3 */
+        EXCEP_SYSCALL4          = 0x000320,     /* system call 4 */
+        EXCEP_SYSCALL5          = 0x000328,     /* system call 5 */
+        EXCEP_SYSCALL6          = 0x000330,     /* system call 6 */
+        EXCEP_SYSCALL7          = 0x000338,     /* system call 7 */
+        EXCEP_SYSCALL8          = 0x000340,     /* system call 8 */
+        EXCEP_SYSCALL9          = 0x000348,     /* system call 9 */
+        EXCEP_SYSCALL10         = 0x000350,     /* system call 10 */
+        EXCEP_SYSCALL11         = 0x000358,     /* system call 11 */
+        EXCEP_SYSCALL12         = 0x000360,     /* system call 12 */
+        EXCEP_SYSCALL13         = 0x000368,     /* system call 13 */
+        EXCEP_SYSCALL14         = 0x000370,     /* system call 14 */
+        EXCEP_SYSCALL15         = 0x000378,     /* system call 15 */
+};
+extern void __set_intr_stub(enum exception_code code, void *handler);
+extern void set_intr_stub(enum exception_code code, void *handler);
+extern void set_jtag_stub(enum exception_code code, void *handler);
+struct pt_regs;
+extern asmlinkage void __common_exception(void);
+extern asmlinkage void itlb_miss(void);
+extern asmlinkage void dtlb_miss(void);
+extern asmlinkage void itlb_aerror(void);
+extern asmlinkage void dtlb_aerror(void);
+extern asmlinkage void raw_bus_error(void);
+extern asmlinkage void double_fault(void);
+extern asmlinkage int  system_call(struct pt_regs *);
+extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code);
+extern asmlinkage void nmi(struct pt_regs *, enum exception_code);
+extern asmlinkage void uninitialised_exception(struct pt_regs *,
+                                               enum exception_code);
+extern asmlinkage void irq_handler(void);
+extern asmlinkage void profile_handler(void);
+extern asmlinkage void nmi_handler(void);
+extern asmlinkage void misalignment(struct pt_regs *, enum exception_code);
+extern void die(const char *, struct pt_regs *, enum exception_code)
+        ATTRIB_NORET;
+extern int die_if_no_fixup(const char *, struct pt_regs *, enum exception_code);
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_EXCEPTIONS_H */
diff --git a/arch/mn10300/include/asm/fb.h b/arch/mn10300/include/asm/fb.h
new file mode 100644
index 000000000000..697b24a91e1a
--- /dev/null
+++ b/arch/mn10300/include/asm/fb.h
@@ -0,0 +1,23 @@
+/* MN10300 Frame buffer stuff
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_FB_H
+#define _ASM_FB_H
+#include <linux/fb.h>
+#define fb_pgprotect(...) do {} while (0)
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+        return 0;
+}
+#endif /* _ASM_FB_H */
diff --git a/arch/mn10300/include/asm/fcntl.h b/arch/mn10300/include/asm/fcntl.h
new file mode 100644
index 000000000000..46ab12db5739
--- /dev/null
+++ b/arch/mn10300/include/asm/fcntl.h
@@ -0,0 +1 @@
+#include <asm-generic/fcntl.h>
diff --git a/arch/mn10300/include/asm/fpu.h b/arch/mn10300/include/asm/fpu.h
new file mode 100644
index 000000000000..64a2b83a7a6a
--- /dev/null
+++ b/arch/mn10300/include/asm/fpu.h
@@ -0,0 +1,85 @@
+/* MN10300 FPU definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * Derived from include/asm-i386/i387.h: Copyright (C) 1994 Linus Torvalds
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_FPU_H
+#define _ASM_FPU_H
+#include <asm/processor.h>
+#include <asm/sigcontext.h>
+#include <asm/user.h>
+#ifdef __KERNEL__
+/* the task that owns the FPU state */
+extern struct task_struct *fpu_state_owner;
+#define set_using_fpu(tsk)                              \
+do {                                                    \
+        (tsk)->thread.fpu_flags |= THREAD_USING_FPU;    \
+} while (0)
+#define clear_using_fpu(tsk)                            \
+do {                                                    \
+        (tsk)->thread.fpu_flags &= ~THREAD_USING_FPU;   \
+} while (0)
+#define is_using_fpu(tsk) ((tsk)->thread.fpu_flags & THREAD_USING_FPU)
+#define unlazy_fpu(tsk)                                 \
+do {                                                    \
+        preempt_disable();                              \
+        if (fpu_state_owner == (tsk))                   \
+                fpu_save(&tsk->thread.fpu_state);       \
+        preempt_enable();                               \
+} while (0)
+#define exit_fpu()                              \
+do {                                            \
+        struct task_struct *__tsk = current;    \
+        preempt_disable();                      \
+        if (fpu_state_owner == __tsk)           \
+                fpu_state_owner = NULL;         \
+        preempt_enable();                       \
+} while (0)
+#define flush_fpu()                                     \
+do {                                                    \
+        struct task_struct *__tsk = current;            \
+        preempt_disable();                              \
+        if (fpu_state_owner == __tsk) {                 \
+                fpu_state_owner = NULL;                 \
+                __tsk->thread.uregs->epsw &= ~EPSW_FE;  \
+        }                                               \
+        preempt_enable();                               \
+        clear_using_fpu(__tsk);                         \
+} while (0)
+extern asmlinkage void fpu_init_state(void);
+extern asmlinkage void fpu_kill_state(struct task_struct *);
+extern asmlinkage void fpu_disabled(struct pt_regs *, enum exception_code);
+extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code);
+#ifdef CONFIG_FPU
+extern asmlinkage void fpu_save(struct fpu_state_struct *);
+extern asmlinkage void fpu_restore(struct fpu_state_struct *);
+#else
+#define fpu_save(a)
+#define fpu_restore(a)
+#endif /* CONFIG_FPU  */
+/*
+ * signal frame handlers
+ */
+extern int fpu_setup_sigcontext(struct fpucontext *buf);
+extern int fpu_restore_sigcontext(struct fpucontext *buf);
+#endif /* __KERNEL__ */
+#endif /* _ASM_FPU_H */
diff --git a/arch/mn10300/include/asm/frame.inc b/arch/mn10300/include/asm/frame.inc
new file mode 100644
index 000000000000..5b1949bdf039
--- /dev/null
+++ b/arch/mn10300/include/asm/frame.inc
@@ -0,0 +1,91 @@
+/* MN10300 Microcontroller core system register definitions -*- asm -*-
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_FRAME_INC
+#define _ASM_FRAME_INC
+#ifndef __ASSEMBLY__
+#error not for use in C files
+#endif
+#ifndef __ASM_OFFSETS_H__
+#include <asm/asm-offsets.h>
+#endif
+#define pi break
+#define fp a3
+###############################################################################
+#
+# build a stack frame from the registers
+# - the caller has subtracted 4 from SP before coming here
+#
+###############################################################################
+.macro SAVE_ALL
+        add     -4,sp                           # next exception frame ptr save area
+        movm    [other],(sp)
+        mov     usp,a1
+        mov     a1,(sp)                         # USP in MOVM[other] dummy slot
+        movm    [d2,d3,a2,a3,exreg0,exreg1,exother],(sp)
+        mov     sp,fp                           # FRAME pointer in A3
+        add     -12,sp                          # allow for calls to be made
+        mov     (__frame),a1
+        mov     a1,(REG_NEXT,fp)
+        mov     fp,(__frame)
+        and     ~EPSW_FE,epsw                   # disable the FPU inside the kernel
+        # we may be holding current in E2
+#ifdef CONFIG_MN10300_CURRENT_IN_E2
+        mov     (__current),e2
+#endif
+.endm
+###############################################################################
+#
+# restore the registers from a stack frame
+#
+###############################################################################
+.macro RESTORE_ALL
+        # peel back the stack to the calling frame
+        # - this permits execve() to discard extra frames due to kernel syscalls
+        mov     (__frame),fp
+        mov     fp,sp
+        mov     (REG_NEXT,fp),d0                # userspace has regs->next == 0
+        mov     d0,(__frame)
+#ifndef CONFIG_MN10300_USING_JTAG
+        mov     (REG_EPSW,fp),d0
+        btst    EPSW_T,d0
+        beq     99f
+        or      EPSW_NMID,epsw
+        movhu   (DCR),d1
+        or      0x0001, d1
+        movhu   d1,(DCR)
+99:
+#endif
+        movm    (sp),[d2,d3,a2,a3,exreg0,exreg1,exother]
+        # must restore usp even if returning to kernel space,
+        # when CONFIG_PREEMPT is enabled.
+        mov     (sp),a1                         # USP in MOVM[other] dummy slot
+        mov     a1,usp
+        movm    (sp),[other]
+        add     8,sp
+        rti
+.endm
+#endif /* _ASM_FRAME_INC */
diff --git a/arch/mn10300/include/asm/ftrace.h b/arch/mn10300/include/asm/ftrace.h
new file mode 100644
index 000000000000..40a8c178f10d
--- /dev/null
+++ b/arch/mn10300/include/asm/ftrace.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/mn10300/include/asm/futex.h b/arch/mn10300/include/asm/futex.h
new file mode 100644
index 000000000000..0b745828f42b
--- /dev/null
+++ b/arch/mn10300/include/asm/futex.h
@@ -0,0 +1 @@
+#include <asm-generic/futex.h>
diff --git a/arch/mn10300/include/asm/gdb-stub.h b/arch/mn10300/include/asm/gdb-stub.h
new file mode 100644
index 000000000000..e5a6368559af
--- /dev/null
+++ b/arch/mn10300/include/asm/gdb-stub.h
@@ -0,0 +1,183 @@
+/* MN10300 Kernel GDB stub definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from asm-mips/gdb-stub.h (c) 1995 Andreas Busse
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_GDB_STUB_H
+#define _ASM_GDB_STUB_H
+#include <asm/exceptions.h>
+/*
+ * register ID numbers in GDB remote protocol
+ */
+#define GDB_REGID_PC            9
+#define GDB_REGID_FP            7
+#define GDB_REGID_SP            8
+/*
+ * virtual stack layout for the GDB exception handler
+ */
+#define NUMREGS                 64
+#define GDB_FR_D0               (0 * 4)
+#define GDB_FR_D1               (1 * 4)
+#define GDB_FR_D2               (2 * 4)
+#define GDB_FR_D3               (3 * 4)
+#define GDB_FR_A0               (4 * 4)
+#define GDB_FR_A1               (5 * 4)
+#define GDB_FR_A2               (6 * 4)
+#define GDB_FR_A3               (7 * 4)
+#define GDB_FR_SP               (8 * 4)
+#define GDB_FR_PC               (9 * 4)
+#define GDB_FR_MDR              (10 * 4)
+#define GDB_FR_EPSW             (11 * 4)
+#define GDB_FR_LIR              (12 * 4)
+#define GDB_FR_LAR              (13 * 4)
+#define GDB_FR_MDRQ             (14 * 4)
+#define GDB_FR_E0               (15 * 4)
+#define GDB_FR_E1               (16 * 4)
+#define GDB_FR_E2               (17 * 4)
+#define GDB_FR_E3               (18 * 4)
+#define GDB_FR_E4               (19 * 4)
+#define GDB_FR_E5               (20 * 4)
+#define GDB_FR_E6               (21 * 4)
+#define GDB_FR_E7               (22 * 4)
+#define GDB_FR_SSP              (23 * 4)
+#define GDB_FR_MSP              (24 * 4)
+#define GDB_FR_USP              (25 * 4)
+#define GDB_FR_MCRH             (26 * 4)
+#define GDB_FR_MCRL             (27 * 4)
+#define GDB_FR_MCVF             (28 * 4)
+#define GDB_FR_FPCR             (29 * 4)
+#define GDB_FR_DUMMY0           (30 * 4)
+#define GDB_FR_DUMMY1           (31 * 4)
+#define GDB_FR_FS0              (32 * 4)
+#define GDB_FR_SIZE             (NUMREGS * 4)
+#ifndef __ASSEMBLY__
+/*
+ * This is the same as above, but for the high-level
+ * part of the GDB stub.
+ */
+struct gdb_regs {
+        /* saved main processor registers */
+        u32     d0, d1, d2, d3, a0, a1, a2, a3;
+        u32     sp, pc, mdr, epsw, lir, lar, mdrq;
+        u32     e0, e1, e2, e3, e4, e5, e6, e7;
+        u32     ssp, msp, usp, mcrh, mcrl, mcvf;
+        /* saved floating point registers */
+        u32     fpcr, _dummy0, _dummy1;
+        u32     fs0,  fs1,  fs2,  fs3,  fs4,  fs5,  fs6,  fs7;
+        u32     fs8,  fs9,  fs10, fs11, fs12, fs13, fs14, fs15;
+        u32     fs16, fs17, fs18, fs19, fs20, fs21, fs22, fs23;
+        u32     fs24, fs25, fs26, fs27, fs28, fs29, fs30, fs31;
+};
+/*
+ * Prototypes
+ */
+extern void show_registers_only(struct pt_regs *regs);
+extern asmlinkage void gdbstub_init(void);
+extern asmlinkage void gdbstub_exit(int status);
+extern asmlinkage void gdbstub_io_init(void);
+extern asmlinkage void gdbstub_io_set_baud(unsigned baud);
+extern asmlinkage int  gdbstub_io_rx_char(unsigned char *_ch, int nonblock);
+extern asmlinkage void gdbstub_io_tx_char(unsigned char ch);
+extern asmlinkage void gdbstub_io_tx_flush(void);
+extern asmlinkage void gdbstub_io_rx_handler(void);
+extern asmlinkage void gdbstub_rx_irq(struct pt_regs *, enum exception_code);
+extern asmlinkage int  gdbstub_intercept(struct pt_regs *, enum exception_code);
+extern asmlinkage void gdbstub_exception(struct pt_regs *, enum exception_code);
+extern asmlinkage void __gdbstub_bug_trap(void);
+extern asmlinkage void __gdbstub_pause(void);
+extern asmlinkage void start_kernel(void);
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+extern asmlinkage void gdbstub_purge_cache(void);
+#else
+#define gdbstub_purge_cache()   do {} while (0)
+#endif
+/* Used to prevent crashes in memory access */
+extern asmlinkage int  gdbstub_read_byte(const u8 *, u8 *);
+extern asmlinkage int  gdbstub_read_word(const u8 *, u8 *);
+extern asmlinkage int  gdbstub_read_dword(const u8 *, u8 *);
+extern asmlinkage int  gdbstub_write_byte(u32, u8 *);
+extern asmlinkage int  gdbstub_write_word(u32, u8 *);
+extern asmlinkage int  gdbstub_write_dword(u32, u8 *);
+extern asmlinkage void gdbstub_read_byte_guard(void);
+extern asmlinkage void gdbstub_read_byte_cont(void);
+extern asmlinkage void gdbstub_read_word_guard(void);
+extern asmlinkage void gdbstub_read_word_cont(void);
+extern asmlinkage void gdbstub_read_dword_guard(void);
+extern asmlinkage void gdbstub_read_dword_cont(void);
+extern asmlinkage void gdbstub_write_byte_guard(void);
+extern asmlinkage void gdbstub_write_byte_cont(void);
+extern asmlinkage void gdbstub_write_word_guard(void);
+extern asmlinkage void gdbstub_write_word_cont(void);
+extern asmlinkage void gdbstub_write_dword_guard(void);
+extern asmlinkage void gdbstub_write_dword_cont(void);
+extern u8       gdbstub_rx_buffer[PAGE_SIZE];
+extern u32      gdbstub_rx_inp;
+extern u32      gdbstub_rx_outp;
+extern u8       gdbstub_rx_overflow;
+extern u8       gdbstub_busy;
+extern u8       gdbstub_rx_unget;
+#ifdef CONFIG_GDBSTUB_DEBUGGING
+extern void gdbstub_printk(const char *fmt, ...)
+        __attribute__((format(printf, 1, 2)));
+#else
+static inline __attribute__((format(printf, 1, 2)))
+void gdbstub_printk(const char *fmt, ...)
+{
+}
+#endif
+#ifdef CONFIG_GDBSTUB_DEBUG_ENTRY
+#define gdbstub_entry(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
+#else
+#define gdbstub_entry(FMT, ...) ({ 0; })
+#endif
+#ifdef CONFIG_GDBSTUB_DEBUG_PROTOCOL
+#define gdbstub_proto(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
+#else
+#define gdbstub_proto(FMT, ...) ({ 0; })
+#endif
+#ifdef CONFIG_GDBSTUB_DEBUG_IO
+#define gdbstub_io(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
+#else
+#define gdbstub_io(FMT, ...) ({ 0; })
+#endif
+#ifdef CONFIG_GDBSTUB_DEBUG_BREAKPOINT
+#define gdbstub_bkpt(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
+#else
+#define gdbstub_bkpt(FMT, ...) ({ 0; })
+#endif
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_GDB_STUB_H */
diff --git a/arch/mn10300/include/asm/hardirq.h b/arch/mn10300/include/asm/hardirq.h
new file mode 100644
index 000000000000..54d950117674
--- /dev/null
+++ b/arch/mn10300/include/asm/hardirq.h
@@ -0,0 +1,48 @@
+/* MN10300 Hardware IRQ statistics and management
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_HARDIRQ_H
+#define _ASM_HARDIRQ_H
+#include <linux/threads.h>
+#include <linux/irq.h>
+#include <asm/exceptions.h>
+/* assembly code in softirq.h is sensitive to the offsets of these fields */
+typedef struct {
+        unsigned int    __softirq_pending;
+        unsigned long   idle_timestamp;
+        unsigned int    __nmi_count;    /* arch dependent */
+        unsigned int    __irq_count;    /* arch dependent */
+} ____cacheline_aligned irq_cpustat_t;
+#include <linux/irq_cpustat.h>  /* Standard mappings for irq_cpustat_t above */
+extern void ack_bad_irq(int irq);
+/*
+ * manipulate stubs in the MN10300 CPU Trap/Interrupt Vector table
+ * - these should jump to __common_exception in entry.S unless there's a good
+ *   reason to do otherwise (see trap_preinit() in traps.c)
+ */
+typedef void (*intr_stub_fnx)(struct pt_regs *regs,
+                              enum exception_code intcode);
+/*
+ * manipulate pointers in the Exception table (see entry.S)
+ * - these are indexed by decoding the lower 24 bits of the TBR register
+ * - note that the MN103E010 doesn't always trap through the correct vector,
+ *   but does always set the TBR correctly
+ */
+extern asmlinkage void set_excp_vector(enum exception_code code,
+                                       intr_stub_fnx handler);
+#endif /* _ASM_HARDIRQ_H */
diff --git a/arch/mn10300/include/asm/highmem.h b/arch/mn10300/include/asm/highmem.h
new file mode 100644
index 000000000000..90f2abb04bfd
--- /dev/null
+++ b/arch/mn10300/include/asm/highmem.h
@@ -0,0 +1,116 @@
+/* MN10300 Virtual kernel memory mappings for high memory
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-i386/highmem.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+#ifdef __KERNEL__
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/highmem.h>
+#include <asm/kmap_types.h>
+#include <asm/pgtable.h>
+/* undef for production */
+#undef HIGHMEM_DEBUG
+/* declarations for highmem.c */
+extern unsigned long highstart_pfn, highend_pfn;
+extern pte_t *kmap_pte;
+extern pgprot_t kmap_prot;
+extern pte_t *pkmap_page_table;
+extern void __init kmap_init(void);
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.
+ */
+#define PKMAP_BASE      0xfe000000UL
+#define LAST_PKMAP      1024
+#define LAST_PKMAP_MASK (LAST_PKMAP - 1)
+#define PKMAP_NR(virt)  ((virt - PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+extern unsigned long kmap_high(struct page *page);
+extern void kunmap_high(struct page *page);
+static inline unsigned long kmap(struct page *page)
+{
+        if (in_interrupt())
+                BUG();
+        if (page < highmem_start_page)
+                return page_address(page);
+        return kmap_high(page);
+}
+static inline void kunmap(struct page *page)
+{
+        if (in_interrupt())
+                BUG();
+        if (page < highmem_start_page)
+                return;
+        kunmap_high(page);
+}
+/*
+ * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
+ * gives a more generic (and caching) interface. But kmap_atomic can
+ * be used in IRQ contexts, so in some (very limited) cases we need
+ * it.
+ */
+static inline unsigned long kmap_atomic(struct page *page, enum km_type type)
+{
+        enum fixed_addresses idx;
+        unsigned long vaddr;
+        if (page < highmem_start_page)
+                return page_address(page);
+        debug_kmap_atomic(type);
+        idx = type + KM_TYPE_NR * smp_processor_id();
+        vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+#if HIGHMEM_DEBUG
+        if (!pte_none(*(kmap_pte - idx)))
+                BUG();
+#endif
+        set_pte(kmap_pte - idx, mk_pte(page, kmap_prot));
+        __flush_tlb_one(vaddr);
+        return vaddr;
+}
+static inline void kunmap_atomic(unsigned long vaddr, enum km_type type)
+{
+#if HIGHMEM_DEBUG
+        enum fixed_addresses idx = type + KM_TYPE_NR * smp_processor_id();
+        if (vaddr < FIXADDR_START) /* FIXME */
+                return;
+        if (vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx))
+                BUG();
+        /*
+         * force other mappings to Oops if they'll try to access
+         * this pte without first remap it
+         */
+        pte_clear(kmap_pte - idx);
+        __flush_tlb_one(vaddr);
+#endif
+}
+#endif /* __KERNEL__ */
+#endif /* _ASM_HIGHMEM_H */
diff --git a/arch/mn10300/include/asm/hw_irq.h b/arch/mn10300/include/asm/hw_irq.h
new file mode 100644
index 000000000000..70619901098e
--- /dev/null
+++ b/arch/mn10300/include/asm/hw_irq.h
@@ -0,0 +1,14 @@
+/* MN10300 Hardware interrupt definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_HW_IRQ_H
+#define _ASM_HW_IRQ_H
+#endif /* _ASM_HW_IRQ_H */
diff --git a/arch/mn10300/include/asm/intctl-regs.h b/arch/mn10300/include/asm/intctl-regs.h
new file mode 100644
index 000000000000..ba544c796c5a
--- /dev/null
+++ b/arch/mn10300/include/asm/intctl-regs.h
@@ -0,0 +1,73 @@
+/* MN10300 On-board interrupt controller registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_INTCTL_REGS_H
+#define _ASM_INTCTL_REGS_H
+#include <asm/cpu-regs.h>
+#ifdef __KERNEL__
+/* interrupt controller registers */
+#define GxICR(X)                __SYSREG(0xd4000000 + (X) * 4, u16)     /* group irq ctrl regs */
+#define IAGR                    __SYSREG(0xd4000100, u16)       /* intr acceptance group reg */
+#define IAGR_GN                 0x00fc          /* group number register
+                                                 * (documentation _has_ to be wrong)
+                                                 */
+#define EXTMD                   __SYSREG(0xd4000200, u16)       /* external pin intr spec reg */
+#define GET_XIRQ_TRIGGER(X) ((EXTMD >> ((X) * 2)) & 3)
+#define SET_XIRQ_TRIGGER(X,Y)                   \
+do {                                            \
+        u16 x = EXTMD;                          \
+        x &= ~(3 << ((X) * 2));                 \
+        x |= ((Y) & 3) << ((X) * 2);            \
+        EXTMD = x;                              \
+} while (0)
+#define XIRQ_TRIGGER_LOWLEVEL   0
+#define XIRQ_TRIGGER_HILEVEL    1
+#define XIRQ_TRIGGER_NEGEDGE    2
+#define XIRQ_TRIGGER_POSEDGE    3
+/* non-maskable interrupt control */
+#define NMIIRQ                  0
+#define NMICR                   GxICR(NMIIRQ)   /* NMI control register */
+#define NMICR_NMIF              0x0001          /* NMI pin interrupt flag */
+#define NMICR_WDIF              0x0002          /* watchdog timer overflow flag */
+#define NMICR_ABUSERR           0x0008          /* async bus error flag */
+/* maskable interrupt control */
+#define GxICR_DETECT            0x0001          /* interrupt detect flag */
+#define GxICR_REQUEST           0x0010          /* interrupt request flag */
+#define GxICR_ENABLE            0x0100          /* interrupt enable flag */
+#define GxICR_LEVEL             0x7000          /* interrupt priority level */
+#define GxICR_LEVEL_0           0x0000          /* - level 0 */
+#define GxICR_LEVEL_1           0x1000          /* - level 1 */
+#define GxICR_LEVEL_2           0x2000          /* - level 2 */
+#define GxICR_LEVEL_3           0x3000          /* - level 3 */
+#define GxICR_LEVEL_4           0x4000          /* - level 4 */
+#define GxICR_LEVEL_5           0x5000          /* - level 5 */
+#define GxICR_LEVEL_6           0x6000          /* - level 6 */
+#define GxICR_LEVEL_SHIFT       12
+#ifndef __ASSEMBLY__
+extern void set_intr_level(int irq, u16 level);
+extern void set_intr_postackable(int irq);
+#endif
+/* external interrupts */
+#define XIRQxICR(X)             GxICR((X))      /* external interrupt control regs */
+#endif /* __KERNEL__ */
+#endif /* _ASM_INTCTL_REGS_H */
diff --git a/arch/mn10300/include/asm/io.h b/arch/mn10300/include/asm/io.h
new file mode 100644
index 000000000000..c1a4119e6497
--- /dev/null
+++ b/arch/mn10300/include/asm/io.h
@@ -0,0 +1,301 @@
+/* MN10300 I/O port emulation and memory-mapped I/O
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_IO_H
+#define _ASM_IO_H
+#include <asm/page.h> /* I/O is all done through memory accesses */
+#include <asm/cpu-regs.h>
+#include <asm/cacheflush.h>
+#define mmiowb() do {} while (0)
+/*****************************************************************************/
+/*
+ * readX/writeX() are used to access memory mapped devices. On some
+ * architectures the memory mapped IO stuff needs to be accessed
+ * differently. On the x86 architecture, we just read/write the
+ * memory location directly.
+ */
+static inline u8 readb(const volatile void __iomem *addr)
+{
+        return *(const volatile u8 *) addr;
+}
+static inline u16 readw(const volatile void __iomem *addr)
+{
+        return *(const volatile u16 *) addr;
+}
+static inline u32 readl(const volatile void __iomem *addr)
+{
+        return *(const volatile u32 *) addr;
+}
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+#define readb_relaxed readb
+#define readw_relaxed readw
+#define readl_relaxed readl
+static inline void writeb(u8 b, volatile void __iomem *addr)
+{
+        *(volatile u8 *) addr = b;
+}
+static inline void writew(u16 b, volatile void __iomem *addr)
+{
+        *(volatile u16 *) addr = b;
+}
+static inline void writel(u32 b, volatile void __iomem *addr)
+{
+        *(volatile u32 *) addr = b;
+}
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+/*****************************************************************************/
+/*
+ * traditional input/output functions
+ */
+static inline u8 inb_local(unsigned long addr)
+{
+        return readb((volatile void __iomem *) addr);
+}
+static inline void outb_local(u8 b, unsigned long addr)
+{
+        return writeb(b, (volatile void __iomem *) addr);
+}
+static inline u8 inb(unsigned long addr)
+{
+        return readb((volatile void __iomem *) addr);
+}
+static inline u16 inw(unsigned long addr)
+{
+        return readw((volatile void __iomem *) addr);
+}
+static inline u32 inl(unsigned long addr)
+{
+        return readl((volatile void __iomem *) addr);
+}
+static inline void outb(u8 b, unsigned long addr)
+{
+        return writeb(b, (volatile void __iomem *) addr);
+}
+static inline void outw(u16 b, unsigned long addr)
+{
+        return writew(b, (volatile void __iomem *) addr);
+}
+static inline void outl(u32 b, unsigned long addr)
+{
+        return writel(b, (volatile void __iomem *) addr);
+}
+#define inb_p(addr)     inb(addr)
+#define inw_p(addr)     inw(addr)
+#define inl_p(addr)     inl(addr)
+#define outb_p(x, addr) outb((x), (addr))
+#define outw_p(x, addr) outw((x), (addr))
+#define outl_p(x, addr) outl((x), (addr))
+static inline void insb(unsigned long addr, void *buffer, int count)
+{
+        if (count) {
+                u8 *buf = buffer;
+                do {
+                        u8 x = inb(addr);
+                        *buf++ = x;
+                } while (--count);
+        }
+}
+static inline void insw(unsigned long addr, void *buffer, int count)
+{
+        if (count) {
+                u16 *buf = buffer;
+                do {
+                        u16 x = inw(addr);
+                        *buf++ = x;
+                } while (--count);
+        }
+}
+static inline void insl(unsigned long addr, void *buffer, int count)
+{
+        if (count) {
+                u32 *buf = buffer;
+                do {
+                        u32 x = inl(addr);
+                        *buf++ = x;
+                } while (--count);
+        }
+}
+static inline void outsb(unsigned long addr, const void *buffer, int count)
+{
+        if (count) {
+                const u8 *buf = buffer;
+                do {
+                        outb(*buf++, addr);
+                } while (--count);
+        }
+}
+static inline void outsw(unsigned long addr, const void *buffer, int count)
+{
+        if (count) {
+                const u16 *buf = buffer;
+                do {
+                        outw(*buf++, addr);
+                } while (--count);
+        }
+}
+extern void __outsl(unsigned long addr, const void *buffer, int count);
+static inline void outsl(unsigned long addr, const void *buffer, int count)
+{
+        if ((unsigned long) buffer & 0x3)
+                return __outsl(addr, buffer, count);
+        if (count) {
+                const u32 *buf = buffer;
+                do {
+                        outl(*buf++, addr);
+                } while (--count);
+        }
+}
+#define ioread8(addr)           readb(addr)
+#define ioread16(addr)          readw(addr)
+#define ioread32(addr)          readl(addr)
+#define iowrite8(v, addr)       writeb((v), (addr))
+#define iowrite16(v, addr)      writew((v), (addr))
+#define iowrite32(v, addr)      writel((v), (addr))
+#define ioread8_rep(p, dst, count) \
+        insb((unsigned long) (p), (dst), (count))
+#define ioread16_rep(p, dst, count) \
+        insw((unsigned long) (p), (dst), (count))
+#define ioread32_rep(p, dst, count) \
+        insl((unsigned long) (p), (dst), (count))
+#define iowrite8_rep(p, src, count) \
+        outsb((unsigned long) (p), (src), (count))
+#define iowrite16_rep(p, src, count) \
+        outsw((unsigned long) (p), (src), (count))
+#define iowrite32_rep(p, src, count) \
+        outsl((unsigned long) (p), (src), (count))
+#define IO_SPACE_LIMIT 0xffffffff
+#ifdef __KERNEL__
+#include <linux/vmalloc.h>
+#define __io_virt(x) ((void *) (x))
+/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
+struct pci_dev;
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p)
+{
+}
+/*
+ * Change virtual addresses to physical addresses and vv.
+ * These are pretty trivial
+ */
+static inline unsigned long virt_to_phys(volatile void *address)
+{
+        return __pa(address);
+}
+static inline void *phys_to_virt(unsigned long address)
+{
+        return __va(address);
+}
+/*
+ * Change "struct page" to physical address.
+ */
+static inline void *__ioremap(unsigned long offset, unsigned long size,
+                              unsigned long flags)
+{
+        return (void *) offset;
+}
+static inline void *ioremap(unsigned long offset, unsigned long size)
+{
+        return (void *) offset;
+}
+/*
+ * This one maps high address device memory and turns off caching for that
+ * area.  it's useful if some control registers are in such an area and write
+ * combining or read caching is not desirable:
+ */
+static inline void *ioremap_nocache(unsigned long offset, unsigned long size)
+{
+        return (void *) (offset | 0x20000000);
+}
+#define ioremap_wc ioremap_nocache
+static inline void iounmap(void *addr)
+{
+}
+static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+        return (void __iomem *) port;
+}
+static inline void ioport_unmap(void __iomem *p)
+{
+}
+#define xlate_dev_kmem_ptr(p)   ((void *) (p))
+#define xlate_dev_mem_ptr(p)    ((void *) (p))
+/*
+ * PCI bus iomem addresses must be in the region 0x80000000-0x9fffffff
+ */
+static inline unsigned long virt_to_bus(volatile void *address)
+{
+        return ((unsigned long) address) & ~0x20000000;
+}
+static inline void *bus_to_virt(unsigned long address)
+{
+        return (void *) address;
+}
+#define page_to_bus page_to_phys
+#define memset_io(a, b, c)      memset(__io_virt(a), (b), (c))
+#define memcpy_fromio(a, b, c)  memcpy((a), __io_virt(b), (c))
+#define memcpy_toio(a, b, c)    memcpy(__io_virt(a), (b), (c))
+#endif /* __KERNEL__ */
+#endif /* _ASM_IO_H */
diff --git a/arch/mn10300/include/asm/ioctl.h b/arch/mn10300/include/asm/ioctl.h
new file mode 100644
index 000000000000..b279fe06dfe5
--- /dev/null
+++ b/arch/mn10300/include/asm/ioctl.h
@@ -0,0 +1 @@
+#include <asm-generic/ioctl.h>
diff --git a/arch/mn10300/include/asm/ioctls.h b/arch/mn10300/include/asm/ioctls.h
new file mode 100644
index 000000000000..dcbfb452974f
--- /dev/null
+++ b/arch/mn10300/include/asm/ioctls.h
@@ -0,0 +1,88 @@
+#ifndef _ASM_IOCTLS_H
+#define _ASM_IOCTLS_H
+#include <asm/ioctl.h>
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+#define TCGETS          0x5401
+#define TCSETS          0x5402
+#define TCSETSW         0x5403
+#define TCSETSF         0x5404
+#define TCGETA          0x5405
+#define TCSETA          0x5406
+#define TCSETAW         0x5407
+#define TCSETAF         0x5408
+#define TCSBRK          0x5409
+#define TCXONC          0x540A
+#define TCFLSH          0x540B
+#define TIOCEXCL        0x540C
+#define TIOCNXCL        0x540D
+#define TIOCSCTTY       0x540E
+#define TIOCGPGRP       0x540F
+#define TIOCSPGRP       0x5410
+#define TIOCOUTQ        0x5411
+#define TIOCSTI         0x5412
+#define TIOCGWINSZ      0x5413
+#define TIOCSWINSZ      0x5414
+#define TIOCMGET        0x5415
+#define TIOCMBIS        0x5416
+#define TIOCMBIC        0x5417
+#define TIOCMSET        0x5418
+#define TIOCGSOFTCAR    0x5419
+#define TIOCSSOFTCAR    0x541A
+#define FIONREAD        0x541B
+#define TIOCINQ         FIONREAD
+#define TIOCLINUX       0x541C
+#define TIOCCONS        0x541D
+#define TIOCGSERIAL     0x541E
+#define TIOCSSERIAL     0x541F
+#define TIOCPKT         0x5420
+#define FIONBIO         0x5421
+#define TIOCNOTTY       0x5422
+#define TIOCSETD        0x5423
+#define TIOCGETD        0x5424
+#define TCSBRKP         0x5425  /* Needed for POSIX tcsendbreak() */
+/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
+#define TIOCSBRK        0x5427  /* BSD compatibility */
+#define TIOCCBRK        0x5428  /* BSD compatibility */
+#define TIOCGSID        0x5429  /* Return the session ID of FD */
+#define TCGETS2         _IOR('T', 0x2A, struct termios2)
+#define TCSETS2         _IOW('T', 0x2B, struct termios2)
+#define TCSETSW2        _IOW('T', 0x2C, struct termios2)
+#define TCSETSF2        _IOW('T', 0x2D, struct termios2)
+#define TIOCGPTN        _IOR('T', 0x30, unsigned int) /* Get Pty Number
+                                                       * (of pty-mux device) */
+#define TIOCSPTLCK      _IOW('T', 0x31, int)  /* Lock/unlock Pty */
+#define FIONCLEX        0x5450
+#define FIOCLEX         0x5451
+#define FIOASYNC        0x5452
+#define TIOCSERCONFIG   0x5453
+#define TIOCSERGWILD    0x5454
+#define TIOCSERSWILD    0x5455
+#define TIOCGLCKTRMIOS  0x5456
+#define TIOCSLCKTRMIOS  0x5457
+#define TIOCSERGSTRUCT  0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+#define TIOCMIWAIT      0x545C  /* wait for a change on serial input line(s) */
+#define TIOCGICOUNT     0x545D  /* read serial port inline interrupt counts */
+#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
+#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
+#define FIOQSIZE        0x5460
+/* Used for packet mode */
+#define TIOCPKT_DATA             0
+#define TIOCPKT_FLUSHREAD        1
+#define TIOCPKT_FLUSHWRITE       2
+#define TIOCPKT_STOP             4
+#define TIOCPKT_START            8
+#define TIOCPKT_NOSTOP          16
+#define TIOCPKT_DOSTOP          32
+#define TIOCSER_TEMT    0x01    /* Transmitter physically empty */
+#endif /* _ASM_IOCTLS_H */
diff --git a/arch/mn10300/include/asm/ipc.h b/arch/mn10300/include/asm/ipc.h
new file mode 100644
index 000000000000..a46e3d9c2a3f
--- /dev/null
+++ b/arch/mn10300/include/asm/ipc.h
@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>
diff --git a/arch/mn10300/include/asm/ipcbuf.h b/arch/mn10300/include/asm/ipcbuf.h
new file mode 100644
index 000000000000..f6f63d448272
--- /dev/null
+++ b/arch/mn10300/include/asm/ipcbuf.h
@@ -0,0 +1,29 @@
+#ifndef _ASM_IPCBUF_H
+#define _ASM_IPCBUF_H
+/*
+ * The ipc64_perm structure for MN10300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+struct ipc64_perm
+{
+        __kernel_key_t          key;
+        __kernel_uid32_t        uid;
+        __kernel_gid32_t        gid;
+        __kernel_uid32_t        cuid;
+        __kernel_gid32_t        cgid;
+        __kernel_mode_t         mode;
+        unsigned short          __pad1;
+        unsigned short          seq;
+        unsigned short          __pad2;
+        unsigned long           __unused1;
+        unsigned long           __unused2;
+};
+#endif /* _ASM_IPCBUF_H */
diff --git a/arch/mn10300/include/asm/irq.h b/arch/mn10300/include/asm/irq.h
new file mode 100644
index 000000000000..53b380116901
--- /dev/null
+++ b/arch/mn10300/include/asm/irq.h
@@ -0,0 +1,32 @@
+/* MN10300 Hardware interrupt definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-i386/irq.h:
+ *   - (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_IRQ_H
+#define _ASM_IRQ_H
+#include <asm/intctl-regs.h>
+#include <asm/reset-regs.h>
+#include <asm/proc/irq.h>
+/* this number is used when no interrupt has been assigned */
+#define NO_IRQ          INT_MAX
+/* hardware irq numbers */
+#define NR_IRQS         GxICR_NUM_IRQS
+/* external hardware irq numbers */
+#define NR_XIRQS        GxICR_NUM_XIRQS
+#define irq_canonicalize(IRQ) (IRQ)
+#endif /* _ASM_IRQ_H */
diff --git a/arch/mn10300/include/asm/irq_regs.h b/arch/mn10300/include/asm/irq_regs.h
new file mode 100644
index 000000000000..a848cd232eb4
--- /dev/null
+++ b/arch/mn10300/include/asm/irq_regs.h
@@ -0,0 +1,24 @@
+/* MN10300 IRQ registers pointer definition
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_IRQ_REGS_H
+#define _ASM_IRQ_REGS_H
+/*
+ * Per-cpu current frame pointer - the location of the last exception frame on
+ * the stack
+ */
+#define ARCH_HAS_OWN_IRQ_REGS
+#ifndef __ASSEMBLY__
+#define get_irq_regs() (__frame)
+#endif
+#endif /* _ASM_IRQ_REGS_H */
diff --git a/arch/mn10300/include/asm/kdebug.h b/arch/mn10300/include/asm/kdebug.h
new file mode 100644
index 000000000000..0f47e112190c
--- /dev/null
+++ b/arch/mn10300/include/asm/kdebug.h
@@ -0,0 +1,22 @@
+/* MN10300 In-kernel death knells
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_KDEBUG_H
+#define _ASM_KDEBUG_H
+/* Grossly misnamed. */
+enum die_val {
+        DIE_OOPS = 1,
+        DIE_BREAKPOINT,
+        DIE_GPF,
+};
+#endif /* _ASM_KDEBUG_H */
diff --git a/arch/mn10300/include/asm/kmap_types.h b/arch/mn10300/include/asm/kmap_types.h
new file mode 100644
index 000000000000..3398f9f35603
--- /dev/null
+++ b/arch/mn10300/include/asm/kmap_types.h
@@ -0,0 +1,31 @@
+/* MN10300 kmap_atomic() slot IDs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+enum km_type {
+        KM_BOUNCE_READ,
+        KM_SKB_SUNRPC_DATA,
+        KM_SKB_DATA_SOFTIRQ,
+        KM_USER0,
+        KM_USER1,
+        KM_BIO_SRC_IRQ,
+        KM_BIO_DST_IRQ,
+        KM_PTE0,
+        KM_PTE1,
+        KM_IRQ0,
+        KM_IRQ1,
+        KM_SOFTIRQ0,
+        KM_SOFTIRQ1,
+        KM_TYPE_NR
+};
+#endif /* _ASM_KMAP_TYPES_H */
diff --git a/arch/mn10300/include/asm/kprobes.h b/arch/mn10300/include/asm/kprobes.h
new file mode 100644
index 000000000000..c800b590183a
--- /dev/null
+++ b/arch/mn10300/include/asm/kprobes.h
@@ -0,0 +1,50 @@
+/* MN10300 Kernel Probes support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by Mark Salter (msalter@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public Licence as published by
+ * the Free Software Foundation; either version 2 of the Licence, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public Licence for more details.
+ *
+ * You should have received a copy of the GNU General Public Licence
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+#ifndef _ASM_KPROBES_H
+#define _ASM_KPROBES_H
+#include <linux/types.h>
+#include <linux/ptrace.h>
+struct kprobe;
+typedef unsigned char kprobe_opcode_t;
+#define BREAKPOINT_INSTRUCTION  0xff
+#define MAX_INSN_SIZE 8
+#define MAX_STACK_SIZE 128
+/* Architecture specific copy of original instruction */
+struct arch_specific_insn {
+        /*  copy of original instruction
+         */
+        kprobe_opcode_t insn[MAX_INSN_SIZE];
+};
+extern const int kretprobe_blacklist_size;
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+                                    unsigned long val, void *data);
+#define flush_insn_slot(p)  do {} while (0)
+extern void arch_remove_kprobe(struct kprobe *p);
+#endif /* _ASM_KPROBES_H */
diff --git a/arch/mn10300/include/asm/linkage.h b/arch/mn10300/include/asm/linkage.h
new file mode 100644
index 000000000000..dda3002a5dfa
--- /dev/null
+++ b/arch/mn10300/include/asm/linkage.h
@@ -0,0 +1,20 @@
+/* MN10300 Linkage and calling-convention overrides
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_LINKAGE_H
+#define _ASM_LINKAGE_H
+/* don't override anything */
+#define asmlinkage
+#define __ALIGN         .align 4,0xcb
+#define __ALIGN_STR     ".align 4,0xcb"
+#endif
diff --git a/arch/mn10300/include/asm/local.h b/arch/mn10300/include/asm/local.h
new file mode 100644
index 000000000000..c11c530f74d0
--- /dev/null
+++ b/arch/mn10300/include/asm/local.h
@@ -0,0 +1 @@
+#include <asm-generic/local.h>
diff --git a/arch/mn10300/include/asm/mc146818rtc.h b/arch/mn10300/include/asm/mc146818rtc.h
new file mode 100644
index 000000000000..df6bc6e0e8c6
--- /dev/null
+++ b/arch/mn10300/include/asm/mc146818rtc.h
@@ -0,0 +1 @@
+#include <asm/rtc-regs.h>
diff --git a/arch/mn10300/include/asm/mman.h b/arch/mn10300/include/asm/mman.h
new file mode 100644
index 000000000000..b7986b65addf
--- /dev/null
+++ b/arch/mn10300/include/asm/mman.h
@@ -0,0 +1,28 @@
+/* MN10300 Constants for mmap and co.
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * - Derived from asm-x86/mman.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_MMAN_H
+#define _ASM_MMAN_H
+#include <asm-generic/mman.h>
+#define MAP_GROWSDOWN   0x0100          /* stack-like segment */
+#define MAP_DENYWRITE   0x0800          /* ETXTBSY */
+#define MAP_EXECUTABLE  0x1000          /* mark it as an executable */
+#define MAP_LOCKED      0x2000          /* pages are locked */
+#define MAP_NORESERVE   0x4000          /* don't check for reservations */
+#define MAP_POPULATE    0x8000          /* populate (prefault) pagetables */
+#define MAP_NONBLOCK    0x10000         /* do not block on IO */
+#define MCL_CURRENT     1               /* lock all current mappings */
+#define MCL_FUTURE      2               /* lock all future mappings */
+#endif /* _ASM_MMAN_H */
diff --git a/arch/mn10300/include/asm/mmu.h b/arch/mn10300/include/asm/mmu.h
new file mode 100644
index 000000000000..2d2d097e7309
--- /dev/null
+++ b/arch/mn10300/include/asm/mmu.h
@@ -0,0 +1,19 @@
+/* MN10300 Memory management context
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-frv/mmu.h
+ */
+#ifndef _ASM_MMU_H
+#define _ASM_MMU_H
+/*
+ * MMU context
+ */
+typedef struct {
+        unsigned long   tlbpid[NR_CPUS];        /* TLB PID for this process on
+                                                 * each CPU */
+} mm_context_t;
+#endif /* _ASM_MMU_H */
diff --git a/arch/mn10300/include/asm/mmu_context.h b/arch/mn10300/include/asm/mmu_context.h
new file mode 100644
index 000000000000..a9e2e34f69b0
--- /dev/null
+++ b/arch/mn10300/include/asm/mmu_context.h
@@ -0,0 +1,138 @@
+/* MN10300 MMU context management
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-m32r/mmu_context.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ *
+ * This implements an algorithm to provide TLB PID mappings to provide
+ * selective access to the TLB for processes, thus reducing the number of TLB
+ * flushes required.
+ *
+ * Note, however, that the M32R algorithm is technically broken as it does not
+ * handle version wrap-around, and could, theoretically, have a problem with a
+ * very long lived program that sleeps long enough for the version number to
+ * wrap all the way around so that its TLB mappings appear valid once again.
+ */
+#ifndef _ASM_MMU_CONTEXT_H
+#define _ASM_MMU_CONTEXT_H
+#include <asm/atomic.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+#include <asm-generic/mm_hooks.h>
+#define MMU_CONTEXT_TLBPID_MASK         0x000000ffUL
+#define MMU_CONTEXT_VERSION_MASK        0xffffff00UL
+#define MMU_CONTEXT_FIRST_VERSION       0x00000100UL
+#define MMU_NO_CONTEXT                  0x00000000UL
+extern unsigned long mmu_context_cache[NR_CPUS];
+#define mm_context(mm)  (mm->context.tlbpid[smp_processor_id()])
+#define enter_lazy_tlb(mm, tsk) do {} while (0)
+#ifdef CONFIG_SMP
+#define cpu_ran_vm(cpu, task) \
+        cpu_set((cpu), (task)->cpu_vm_mask)
+#define cpu_maybe_ran_vm(cpu, task) \
+        cpu_test_and_set((cpu), (task)->cpu_vm_mask)
+#else
+#define cpu_ran_vm(cpu, task)           do {} while (0)
+#define cpu_maybe_ran_vm(cpu, task)     true
+#endif /* CONFIG_SMP */
+/*
+ * allocate an MMU context
+ */
+static inline unsigned long allocate_mmu_context(struct mm_struct *mm)
+{
+        unsigned long *pmc = &mmu_context_cache[smp_processor_id()];
+        unsigned long mc = ++(*pmc);
+        if (!(mc & MMU_CONTEXT_TLBPID_MASK)) {
+                /* we exhausted the TLB PIDs of this version on this CPU, so we
+                 * flush this CPU's TLB in its entirety and start new cycle */
+                flush_tlb_all();
+                /* fix the TLB version if needed (we avoid version #0 so as to
+                 * distingush MMU_NO_CONTEXT) */
+                if (!mc)
+                        *pmc = mc = MMU_CONTEXT_FIRST_VERSION;
+        }
+        mm_context(mm) = mc;
+        return mc;
+}
+/*
+ * get an MMU context if one is needed
+ */
+static inline unsigned long get_mmu_context(struct mm_struct *mm)
+{
+        unsigned long mc = MMU_NO_CONTEXT, cache;
+        if (mm) {
+                cache = mmu_context_cache[smp_processor_id()];
+                mc = mm_context(mm);
+                /* if we have an old version of the context, replace it */
+                if ((mc ^ cache) & MMU_CONTEXT_VERSION_MASK)
+                        mc = allocate_mmu_context(mm);
+        }
+        return mc;
+}
+/*
+ * initialise the context related info for a new mm_struct instance
+ */
+static inline int init_new_context(struct task_struct *tsk,
+                                   struct mm_struct *mm)
+{
+        int num_cpus = NR_CPUS, i;
+        for (i = 0; i < num_cpus; i++)
+                mm->context.tlbpid[i] = MMU_NO_CONTEXT;
+        return 0;
+}
+/*
+ * destroy context related info for an mm_struct that is about to be put to
+ * rest
+ */
+#define destroy_context(mm)     do { } while (0)
+/*
+ * after we have set current->mm to a new value, this activates the context for
+ * the new mm so we see the new mappings.
+ */
+static inline void activate_context(struct mm_struct *mm, int cpu)
+{
+        PIDR = get_mmu_context(mm) & MMU_CONTEXT_TLBPID_MASK;
+}
+/*
+ * change between virtual memory sets
+ */
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+                             struct task_struct *tsk)
+{
+        int cpu = smp_processor_id();
+        if (prev != next) {
+                cpu_ran_vm(cpu, next);
+                activate_context(next, cpu);
+                PTBR = (unsigned long) next->pgd;
+        } else if (!cpu_maybe_ran_vm(cpu, next)) {
+                activate_context(next, cpu);
+        }
+}
+#define deactivate_mm(tsk, mm)  do {} while (0)
+#define activate_mm(prev, next) switch_mm((prev), (next), NULL)
+#endif /* _ASM_MMU_CONTEXT_H */
diff --git a/arch/mn10300/include/asm/module.h b/arch/mn10300/include/asm/module.h
new file mode 100644
index 000000000000..5d7057d01494
--- /dev/null
+++ b/arch/mn10300/include/asm/module.h
@@ -0,0 +1,27 @@
+/* MN10300 Arch-specific module definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by Mark Salter (msalter@redhat.com)
+ * Derived from include/asm-i386/module.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_MODULE_H
+#define _ASM_MODULE_H
+struct mod_arch_specific {
+};
+#define Elf_Shdr        Elf32_Shdr
+#define Elf_Sym         Elf32_Sym
+#define Elf_Ehdr        Elf32_Ehdr
+/*
+ * Include the MN10300 architecture version.
+ */
+#define MODULE_ARCH_VERMAGIC __stringify(PROCESSOR_MODEL_NAME) " "
+#endif /* _ASM_MODULE_H */
diff --git a/arch/mn10300/include/asm/msgbuf.h b/arch/mn10300/include/asm/msgbuf.h
new file mode 100644
index 000000000000..8b602450cc4a
--- /dev/null
+++ b/arch/mn10300/include/asm/msgbuf.h
@@ -0,0 +1,31 @@
+#ifndef _ASM_MSGBUF_H
+#define _ASM_MSGBUF_H
+/*
+ * The msqid64_ds structure for MN10300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+struct msqid64_ds {
+        struct ipc64_perm       msg_perm;
+        __kernel_time_t         msg_stime;      /* last msgsnd time */
+        unsigned long           __unused1;
+        __kernel_time_t         msg_rtime;      /* last msgrcv time */
+        unsigned long           __unused2;
+        __kernel_time_t         msg_ctime;      /* last change time */
+        unsigned long           __unused3;
+        unsigned long           msg_cbytes;     /* current number of bytes on queue */
+        unsigned long           msg_qnum;       /* number of messages in queue */
+        unsigned long           msg_qbytes;     /* max number of bytes on queue */
+        __kernel_pid_t          msg_lspid;      /* pid of last msgsnd */
+        __kernel_pid_t          msg_lrpid;      /* last receive pid */
+        unsigned long           __unused4;
+        unsigned long           __unused5;
+};
+#endif /* _ASM_MSGBUF_H */
diff --git a/arch/mn10300/include/asm/mutex.h b/arch/mn10300/include/asm/mutex.h
new file mode 100644
index 000000000000..84f5490c6fb4
--- /dev/null
+++ b/arch/mn10300/include/asm/mutex.h
@@ -0,0 +1,16 @@
+/* MN10300 Mutex fastpath
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+#include <asm-generic/mutex-null.h>
diff --git a/arch/mn10300/include/asm/nmi.h b/arch/mn10300/include/asm/nmi.h
new file mode 100644
index 000000000000..f3671cbbc117
--- /dev/null
+++ b/arch/mn10300/include/asm/nmi.h
@@ -0,0 +1,14 @@
+/* MN10300 NMI handling
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_NMI_H
+#define _ASM_NMI_H
+#endif /* _ASM_NMI_H */
diff --git a/arch/mn10300/include/asm/page.h b/arch/mn10300/include/asm/page.h
new file mode 100644
index 000000000000..8288e124165b
--- /dev/null
+++ b/arch/mn10300/include/asm/page.h
@@ -0,0 +1,128 @@
+/* MN10300 Page table definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PAGE_H
+#define _ASM_PAGE_H
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT      12
+#ifndef __ASSEMBLY__
+#define PAGE_SIZE       (1UL << PAGE_SHIFT)
+#define PAGE_MASK       (~(PAGE_SIZE - 1))
+#else
+#define PAGE_SIZE       +(1 << PAGE_SHIFT)      /* unary plus marks an
+                                                 * immediate val not an addr */
+#define PAGE_MASK       +(~(PAGE_SIZE - 1))
+#endif
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#define clear_page(page)        memset((void *)(page), 0, PAGE_SIZE)
+#define copy_page(to, from)     memcpy((void *)(to), (void *)(from), PAGE_SIZE)
+#define clear_user_page(addr, vaddr, page)      clear_page(addr)
+#define copy_user_page(vto, vfrom, vaddr, to)   copy_page(vto, vfrom)
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
+#define PTE_MASK        PAGE_MASK
+#define HPAGE_SHIFT     22
+#ifdef CONFIG_HUGETLB_PAGE
+#define HPAGE_SIZE              ((1UL) << HPAGE_SHIFT)
+#define HPAGE_MASK              (~(HPAGE_SIZE - 1))
+#define HUGETLB_PAGE_ORDER      (HPAGE_SHIFT - PAGE_SHIFT)
+#endif
+#define pte_val(x)      ((x).pte)
+#define pgd_val(x)      ((x).pgd)
+#define pgprot_val(x)   ((x).pgprot)
+#define __pte(x)        ((pte_t) { (x) })
+#define __pgd(x)        ((pgd_t) { (x) })
+#define __pgprot(x)     ((pgprot_t) { (x) })
+#include <asm-generic/pgtable-nopmd.h>
+#endif /* !__ASSEMBLY__ */
+/*
+ * This handles the memory map.. We could make this a config
+ * option, but too many people screw it up, and too few need
+ * it.
+ *
+ * A __PAGE_OFFSET of 0xC0000000 means that the kernel has
+ * a virtual address space of one gigabyte, which limits the
+ * amount of physical memory you can use to about 950MB.
+ */
+#ifndef __ASSEMBLY__
+/* Pure 2^n version of get_order */
+static inline int get_order(unsigned long size) __attribute__((const));
+static inline int get_order(unsigned long size)
+{
+        int order;
+        size = (size - 1) >> (PAGE_SHIFT - 1);
+        order = -1;
+        do {
+                size >>= 1;
+                order++;
+        } while (size);
+        return order;
+}
+#endif /* __ASSEMBLY__ */
+#include <asm/page_offset.h>
+#define __PAGE_OFFSET           (PAGE_OFFSET_RAW)
+#define PAGE_OFFSET             ((unsigned long) __PAGE_OFFSET)
+/*
+ * main RAM and kernel working space are coincident at 0x90000000, but to make
+ * life more interesting, there's also an uncached virtual shadow at 0xb0000000
+ * - these mappings are fixed in the MMU
+ */
+#define __pfn_disp              (CONFIG_KERNEL_RAM_BASE_ADDRESS >> PAGE_SHIFT)
+#define __pa(x)                 ((unsigned long)(x))
+#define __va(x)                 ((void *)(unsigned long)(x))
+#define pfn_to_kaddr(pfn)       __va((pfn) << PAGE_SHIFT)
+#define pfn_to_page(pfn)        (mem_map + ((pfn) - __pfn_disp))
+#define page_to_pfn(page)       ((unsigned long)((page) - mem_map) + __pfn_disp)
+#define pfn_valid(pfn)                                  \
+({                                                      \
+        unsigned long __pfn = (pfn) - __pfn_disp;       \
+        __pfn < max_mapnr;                              \
+})
+#define virt_to_page(kaddr)     pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define virt_addr_valid(kaddr)  pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+#define page_to_phys(page)      (page_to_pfn(page) << PAGE_SHIFT)
+#define VM_DATA_DEFAULT_FLAGS \
+        (VM_READ | VM_WRITE | \
+        ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
+                 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#endif /* __KERNEL__ */
+#endif /* _ASM_PAGE_H */
diff --git a/arch/mn10300/include/asm/page_offset.h b/arch/mn10300/include/asm/page_offset.h
new file mode 100644
index 000000000000..8eb5b16ad86b
--- /dev/null
+++ b/arch/mn10300/include/asm/page_offset.h
@@ -0,0 +1,11 @@
+/* MN10300 Kernel base address
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ */
+#ifndef _ASM_PAGE_OFFSET_H
+#define _ASM_PAGE_OFFSET_H
+#define PAGE_OFFSET_RAW CONFIG_KERNEL_RAM_BASE_ADDRESS
+#endif
diff --git a/arch/mn10300/include/asm/param.h b/arch/mn10300/include/asm/param.h
new file mode 100644
index 000000000000..789b1df41fcb
--- /dev/null
+++ b/arch/mn10300/include/asm/param.h
@@ -0,0 +1,34 @@
+/* MN10300 Kernel parameters
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PARAM_H
+#define _ASM_PARAM_H
+#ifdef __KERNEL__
+#define HZ              CONFIG_HZ       /* Internal kernel timer frequency */
+#define USER_HZ         100             /* .. some user interfaces are in
+                                         * "ticks" */
+#define CLOCKS_PER_SEC  (USER_HZ)       /* like times() */
+#endif
+#ifndef HZ
+#define HZ              100
+#endif
+#define EXEC_PAGESIZE   4096
+#ifndef NOGROUP
+#define NOGROUP         (-1)
+#endif
+#define MAXHOSTNAMELEN  64      /* max length of hostname */
+#define COMMAND_LINE_SIZE 256
+#endif /* _ASM_PARAM_H */
diff --git a/arch/mn10300/include/asm/pci.h b/arch/mn10300/include/asm/pci.h
new file mode 100644
index 000000000000..0517b45313d8
--- /dev/null
+++ b/arch/mn10300/include/asm/pci.h
@@ -0,0 +1,129 @@
+/* MN10300 PCI definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PCI_H
+#define _ASM_PCI_H
+#ifdef __KERNEL__
+#include <linux/mm.h>           /* for struct page */
+#if 0
+#define __pcbdebug(FMT, ADDR, ...) \
+        printk(KERN_DEBUG "PCIBRIDGE[%08x]: "FMT"\n", \
+               (u32)(ADDR), ##__VA_ARGS__)
+#define __pcidebug(FMT, BUS, DEVFN, WHERE,...)          \
+do {                                                    \
+        printk(KERN_DEBUG "PCI[%02x:%02x.%x + %02x]: "FMT"\n",  \
+               (BUS)->number,                                   \
+               PCI_SLOT(DEVFN),                                 \
+               PCI_FUNC(DEVFN),                                 \
+               (u32)(WHERE), ##__VA_ARGS__);                    \
+} while (0)
+#else
+#define __pcbdebug(FMT, ADDR, ...)              do {} while (0)
+#define __pcidebug(FMT, BUS, DEVFN, WHERE, ...) do {} while (0)
+#endif
+/* Can be used to override the logic in pci_scan_bus for skipping
+ * already-configured bus numbers - to be used for buggy BIOSes or
+ * architectures with incomplete PCI setup by the loader */
+#ifdef CONFIG_PCI
+#define pcibios_assign_all_busses()     1
+extern void unit_pci_init(void);
+#else
+#define pcibios_assign_all_busses()     0
+#endif
+extern unsigned long pci_mem_start;
+#define PCIBIOS_MIN_IO          0xBE000004
+#define PCIBIOS_MIN_MEM         0xB8000000
+void pcibios_set_master(struct pci_dev *dev);
+void pcibios_penalize_isa_irq(int irq);
+/* Dynamic DMA mapping stuff.
+ * i386 has everything mapped statically.
+ */
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <asm/scatterlist.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <asm/io.h>
+struct pci_dev;
+/* The PCI address space does equal the physical memory
+ * address space.  The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS     (1)
+/* This is always fine. */
+#define pci_dac_dma_supported(pci_dev, mask)    (0)
+/* Return the index of the PCI controller for device. */
+static inline int pci_controller_num(struct pci_dev *dev)
+{
+        return 0;
+}
+#define HAVE_PCI_MMAP
+extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+                               enum pci_mmap_state mmap_state,
+                               int write_combine);
+#endif /* __KERNEL__ */
+/* implement the pci_ DMA API in terms of the generic device dma_ one */
+#include <asm-generic/pci-dma-compat.h>
+/**
+ * pcibios_resource_to_bus - convert resource to PCI bus address
+ * @dev: device which owns this resource
+ * @region: converted bus-centric region (start,end)
+ * @res: resource to convert
+ *
+ * Convert a resource to a PCI device bus address or bus window.
+ */
+extern void pcibios_resource_to_bus(struct pci_dev *dev,
+                                    struct pci_bus_region *region,
+                                    struct resource *res);
+extern void pcibios_bus_to_resource(struct pci_dev *dev,
+                                    struct resource *res,
+                                    struct pci_bus_region *region);
+static inline struct resource *
+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
+{
+        struct resource *root = NULL;
+        if (res->flags & IORESOURCE_IO)
+                root = &ioport_resource;
+        if (res->flags & IORESOURCE_MEM)
+                root = &iomem_resource;
+        return root;
+}
+#define pcibios_scan_all_fns(a, b)      0
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+        return channel ? 15 : 14;
+}
+#endif /* _ASM_PCI_H */
diff --git a/arch/mn10300/include/asm/percpu.h b/arch/mn10300/include/asm/percpu.h
new file mode 100644
index 000000000000..06a959d67234
--- /dev/null
+++ b/arch/mn10300/include/asm/percpu.h
@@ -0,0 +1 @@
+#include <asm-generic/percpu.h>
diff --git a/arch/mn10300/include/asm/pgalloc.h b/arch/mn10300/include/asm/pgalloc.h
new file mode 100644
index 000000000000..ec057e1bd4cf
--- /dev/null
+++ b/arch/mn10300/include/asm/pgalloc.h
@@ -0,0 +1,56 @@
+/* MN10300 Page and page table/directory allocation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PGALLOC_H
+#define _ASM_PGALLOC_H
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <linux/threads.h>
+#include <linux/mm.h>           /* for struct page */
+struct mm_struct;
+struct page;
+/* attach a page table to a PMD entry */
+#define pmd_populate_kernel(mm, pmd, pte) \
+        set_pmd(pmd, __pmd(__pa(pte) | _PAGE_TABLE))
+static inline
+void pmd_populate(struct mm_struct *mm, pmd_t *pmd, struct page *pte)
+{
+        set_pmd(pmd, __pmd((page_to_pfn(pte) << PAGE_SHIFT) | _PAGE_TABLE));
+}
+#define pmd_pgtable(pmd) pmd_page(pmd)
+/*
+ * Allocate and free page tables.
+ */
+extern pgd_t *pgd_alloc(struct mm_struct *);
+extern void pgd_free(struct mm_struct *, pgd_t *);
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long);
+extern struct page *pte_alloc_one(struct mm_struct *, unsigned long);
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+        free_page((unsigned long) pte);
+}
+static inline void pte_free(struct mm_struct *mm, struct page *pte)
+{
+        __free_page(pte);
+}
+#define __pte_free_tlb(tlb, pte) tlb_remove_page((tlb), (pte))
+#endif /* _ASM_PGALLOC_H */
diff --git a/arch/mn10300/include/asm/pgtable.h b/arch/mn10300/include/asm/pgtable.h
new file mode 100644
index 000000000000..6dc30fc827c4
--- /dev/null
+++ b/arch/mn10300/include/asm/pgtable.h
@@ -0,0 +1,492 @@
+/* MN10300 Page table manipulators and constants
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ *
+ * The Linux memory management assumes a three-level page table setup. On
+ * the i386, we use that, but "fold" the mid level into the top-level page
+ * table, so that we physically have the same two-level page table as the
+ * i386 mmu expects.
+ *
+ * This file contains the functions and defines necessary to modify and use
+ * the i386 page table tree for the purposes of the MN10300 TLB handler
+ * functions.
+ */
+#ifndef _ASM_PGTABLE_H
+#define _ASM_PGTABLE_H
+#include <asm/cpu-regs.h>
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <linux/threads.h>
+#include <asm/bitops.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+extern unsigned long empty_zero_page[1024];
+extern spinlock_t pgd_lock;
+extern struct page *pgd_list;
+extern void pmd_ctor(void *, struct kmem_cache *, unsigned long);
+extern void pgtable_cache_init(void);
+extern void paging_init(void);
+#endif /* !__ASSEMBLY__ */
+/*
+ * The Linux mn10300 paging architecture only implements both the traditional
+ * 2-level page tables
+ */
+#define PGDIR_SHIFT     22
+#define PTRS_PER_PGD    1024
+#define PTRS_PER_PUD    1       /* we don't really have any PUD physically */
+#define PTRS_PER_PMD    1       /* we don't really have any PMD physically */
+#define PTRS_PER_PTE    1024
+#define PGD_SIZE        PAGE_SIZE
+#define PMD_SIZE        (1UL << PMD_SHIFT)
+#define PGDIR_SIZE      (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK      (~(PGDIR_SIZE - 1))
+#define USER_PTRS_PER_PGD       (TASK_SIZE / PGDIR_SIZE)
+#define FIRST_USER_ADDRESS      0
+#define USER_PGD_PTRS           (PAGE_OFFSET >> PGDIR_SHIFT)
+#define KERNEL_PGD_PTRS         (PTRS_PER_PGD - USER_PGD_PTRS)
+#define TWOLEVEL_PGDIR_SHIFT    22
+#define BOOT_USER_PGD_PTRS      (__PAGE_OFFSET >> TWOLEVEL_PGDIR_SHIFT)
+#define BOOT_KERNEL_PGD_PTRS    (1024 - BOOT_USER_PGD_PTRS)
+#ifndef __ASSEMBLY__
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+#endif
+/*
+ * Unfortunately, due to the way the MMU works on the MN10300, the vmalloc VM
+ * area has to be in the lower half of the virtual address range (the upper
+ * half is not translated through the TLB).
+ *
+ * So in this case, the vmalloc area goes at the bottom of the address map
+ * (leaving a hole at the very bottom to catch addressing errors), and
+ * userspace starts immediately above.
+ *
+ * The vmalloc() routines also leaves a hole of 4kB between each vmalloced
+ * area to catch addressing errors.
+ */
+#define VMALLOC_OFFSET  (8 * 1024 * 1024)
+#define VMALLOC_START   (0x70000000)
+#define VMALLOC_END     (0x7C000000)
+#ifndef __ASSEMBLY__
+extern pte_t kernel_vmalloc_ptes[(VMALLOC_END - VMALLOC_START) / PAGE_SIZE];
+#endif
+/* IPTEL/DPTEL bit assignments */
+#define _PAGE_BIT_VALID         xPTEL_V_BIT
+#define _PAGE_BIT_ACCESSED      xPTEL_UNUSED1_BIT       /* mustn't be loaded into IPTEL/DPTEL */
+#define _PAGE_BIT_NX            xPTEL_UNUSED2_BIT       /* mustn't be loaded into IPTEL/DPTEL */
+#define _PAGE_BIT_CACHE         xPTEL_C_BIT
+#define _PAGE_BIT_PRESENT       xPTEL_PV_BIT
+#define _PAGE_BIT_DIRTY         xPTEL_D_BIT
+#define _PAGE_BIT_GLOBAL        xPTEL_G_BIT
+#define _PAGE_VALID             xPTEL_V
+#define _PAGE_ACCESSED          xPTEL_UNUSED1
+#define _PAGE_NX                xPTEL_UNUSED2           /* no-execute bit */
+#define _PAGE_CACHE             xPTEL_C
+#define _PAGE_PRESENT           xPTEL_PV
+#define _PAGE_DIRTY             xPTEL_D
+#define _PAGE_PROT              xPTEL_PR
+#define _PAGE_PROT_RKNU         xPTEL_PR_ROK
+#define _PAGE_PROT_WKNU         xPTEL_PR_RWK
+#define _PAGE_PROT_RKRU         xPTEL_PR_ROK_ROU
+#define _PAGE_PROT_WKRU         xPTEL_PR_RWK_ROU
+#define _PAGE_PROT_WKWU         xPTEL_PR_RWK_RWU
+#define _PAGE_GLOBAL            xPTEL_G
+#define _PAGE_PSE               xPTEL_PS_4Mb            /* 4MB page */
+#define _PAGE_FILE              xPTEL_UNUSED1_BIT       /* set:pagecache unset:swap */
+#define __PAGE_PROT_UWAUX       0x040
+#define __PAGE_PROT_USER        0x080
+#define __PAGE_PROT_WRITE       0x100
+#define _PAGE_PRESENTV          (_PAGE_PRESENT|_PAGE_VALID)
+#define _PAGE_PROTNONE          0x000   /* If not present */
+#ifndef __ASSEMBLY__
+#define VMALLOC_VMADDR(x) ((unsigned long)(x))
+#define _PAGE_TABLE     (_PAGE_PRESENTV | _PAGE_PROT_WKNU | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _PAGE_CHG_MASK  (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define __PAGE_NONE     (_PAGE_PRESENTV | _PAGE_PROT_RKNU | _PAGE_ACCESSED | _PAGE_CACHE)
+#define __PAGE_SHARED   (_PAGE_PRESENTV | _PAGE_PROT_WKWU | _PAGE_ACCESSED | _PAGE_CACHE)
+#define __PAGE_COPY     (_PAGE_PRESENTV | _PAGE_PROT_RKRU | _PAGE_ACCESSED | _PAGE_CACHE)
+#define __PAGE_READONLY (_PAGE_PRESENTV | _PAGE_PROT_RKRU | _PAGE_ACCESSED | _PAGE_CACHE)
+#define PAGE_NONE               __pgprot(__PAGE_NONE     | _PAGE_NX)
+#define PAGE_SHARED_NOEXEC      __pgprot(__PAGE_SHARED   | _PAGE_NX)
+#define PAGE_COPY_NOEXEC        __pgprot(__PAGE_COPY     | _PAGE_NX)
+#define PAGE_READONLY_NOEXEC    __pgprot(__PAGE_READONLY | _PAGE_NX)
+#define PAGE_SHARED_EXEC        __pgprot(__PAGE_SHARED)
+#define PAGE_COPY_EXEC          __pgprot(__PAGE_COPY)
+#define PAGE_READONLY_EXEC      __pgprot(__PAGE_READONLY)
+#define PAGE_COPY               PAGE_COPY_NOEXEC
+#define PAGE_READONLY           PAGE_READONLY_NOEXEC
+#define PAGE_SHARED             PAGE_SHARED_EXEC
+#define __PAGE_KERNEL_BASE (_PAGE_PRESENTV | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_GLOBAL)
+#define __PAGE_KERNEL           (__PAGE_KERNEL_BASE | _PAGE_PROT_WKNU | _PAGE_CACHE | _PAGE_NX)
+#define __PAGE_KERNEL_NOCACHE   (__PAGE_KERNEL_BASE | _PAGE_PROT_WKNU | _PAGE_NX)
+#define __PAGE_KERNEL_EXEC      (__PAGE_KERNEL & ~_PAGE_NX)
+#define __PAGE_KERNEL_RO        (__PAGE_KERNEL_BASE | _PAGE_PROT_RKNU | _PAGE_CACHE | _PAGE_NX)
+#define __PAGE_KERNEL_LARGE     (__PAGE_KERNEL | _PAGE_PSE)
+#define __PAGE_KERNEL_LARGE_EXEC (__PAGE_KERNEL_EXEC | _PAGE_PSE)
+#define PAGE_KERNEL             __pgprot(__PAGE_KERNEL)
+#define PAGE_KERNEL_RO          __pgprot(__PAGE_KERNEL_RO)
+#define PAGE_KERNEL_EXEC        __pgprot(__PAGE_KERNEL_EXEC)
+#define PAGE_KERNEL_NOCACHE     __pgprot(__PAGE_KERNEL_NOCACHE)
+#define PAGE_KERNEL_LARGE       __pgprot(__PAGE_KERNEL_LARGE)
+#define PAGE_KERNEL_LARGE_EXEC  __pgprot(__PAGE_KERNEL_LARGE_EXEC)
+/*
+ * Whilst the MN10300 can do page protection for execute (given separate data
+ * and insn TLBs), we are not supporting it at the moment. Write permission,
+ * however, always implies read permission (but not execute permission).
+ */
+#define __P000  PAGE_NONE
+#define __P001  PAGE_READONLY_NOEXEC
+#define __P010  PAGE_COPY_NOEXEC
+#define __P011  PAGE_COPY_NOEXEC
+#define __P100  PAGE_READONLY_EXEC
+#define __P101  PAGE_READONLY_EXEC
+#define __P110  PAGE_COPY_EXEC
+#define __P111  PAGE_COPY_EXEC
+#define __S000  PAGE_NONE
+#define __S001  PAGE_READONLY_NOEXEC
+#define __S010  PAGE_SHARED_NOEXEC
+#define __S011  PAGE_SHARED_NOEXEC
+#define __S100  PAGE_READONLY_EXEC
+#define __S101  PAGE_READONLY_EXEC
+#define __S110  PAGE_SHARED_EXEC
+#define __S111  PAGE_SHARED_EXEC
+/*
+ * Define this to warn about kernel memory accesses that are
+ * done without a 'verify_area(VERIFY_WRITE,..)'
+ */
+#undef TEST_VERIFY_AREA
+#define pte_present(x)  (pte_val(x) & _PAGE_VALID)
+#define pte_clear(mm, addr, xp)                         \
+do {                                                    \
+        set_pte_at((mm), (addr), (xp), __pte(0));       \
+} while (0)
+#define pmd_none(x)     (!pmd_val(x))
+#define pmd_present(x)  (!pmd_none(x))
+#define pmd_clear(xp)   do { set_pmd(xp, __pmd(0)); } while (0)
+#define pmd_bad(x)      0
+#define pages_to_mb(x) ((x) >> (20 - PAGE_SHIFT))
+#ifndef __ASSEMBLY__
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_user(pte_t pte)   { return pte_val(pte) & __PAGE_PROT_USER; }
+static inline int pte_read(pte_t pte)   { return pte_val(pte) & __PAGE_PROT_USER; }
+static inline int pte_dirty(pte_t pte)  { return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte)  { return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_write(pte_t pte)  { return pte_val(pte) & __PAGE_PROT_WRITE; }
+static inline int pte_special(pte_t pte){ return 0; }
+/*
+ * The following only works if pte_present() is not true.
+ */
+static inline int pte_file(pte_t pte)   { return pte_val(pte) & _PAGE_FILE; }
+static inline pte_t pte_rdprotect(pte_t pte)
+{
+        pte_val(pte) &= ~(__PAGE_PROT_USER|__PAGE_PROT_UWAUX); return pte;
+}
+static inline pte_t pte_exprotect(pte_t pte)
+{
+        pte_val(pte) |= _PAGE_NX; return pte;
+}
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+        pte_val(pte) &= ~(__PAGE_PROT_WRITE|__PAGE_PROT_UWAUX); return pte;
+}
+static inline pte_t pte_mkclean(pte_t pte)      { pte_val(pte) &= ~_PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkold(pte_t pte)        { pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte)      { pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte)      { pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkexec(pte_t pte)       { pte_val(pte) &= ~_PAGE_NX; return pte; }
+static inline pte_t pte_mkread(pte_t pte)
+{
+        pte_val(pte) |= __PAGE_PROT_USER;
+        if (pte_write(pte))
+                pte_val(pte) |= __PAGE_PROT_UWAUX;
+        return pte;
+}
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+        pte_val(pte) |= __PAGE_PROT_WRITE;
+        if (pte_val(pte) & __PAGE_PROT_USER)
+                pte_val(pte) |= __PAGE_PROT_UWAUX;
+        return pte;
+}
+static inline pte_t pte_mkspecial(pte_t pte)    { return pte; }
+#define pte_ERROR(e) \
+        printk(KERN_ERR "%s:%d: bad pte %08lx.\n", \
+               __FILE__, __LINE__, pte_val(e))
+#define pgd_ERROR(e) \
+        printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \
+               __FILE__, __LINE__, pgd_val(e))
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ */
+#define pgd_clear(xp)                           do { } while (0)
+/*
+ * Certain architectures need to do special things when PTEs
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+#define set_pte(pteptr, pteval)                 (*(pteptr) = pteval)
+#define set_pte_at(mm, addr, ptep, pteval)      set_pte((ptep), (pteval))
+#define set_pte_atomic(pteptr, pteval)          set_pte((pteptr), (pteval))
+/*
+ * (pmds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
+#define ptep_get_and_clear(mm, addr, ptep) \
+        __pte(xchg(&(ptep)->pte, 0))
+#define pte_same(a, b)          (pte_val(a) == pte_val(b))
+#define pte_page(x)             pfn_to_page(pte_pfn(x))
+#define pte_none(x)             (!pte_val(x))
+#define pte_pfn(x)              ((unsigned long) (pte_val(x) >> PAGE_SHIFT))
+#define __pfn_addr(pfn)         ((pfn) << PAGE_SHIFT)
+#define pfn_pte(pfn, prot)      __pte(__pfn_addr(pfn) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot)      __pmd(__pfn_addr(pfn) | pgprot_val(prot))
+/*
+ * All present user pages are user-executable:
+ */
+static inline int pte_exec(pte_t pte)
+{
+        return pte_user(pte);
+}
+/*
+ * All present pages are kernel-executable:
+ */
+static inline int pte_exec_kernel(pte_t pte)
+{
+        return 1;
+}
+/*
+ * Bits 0 and 1 are taken, split up the 29 bits of offset
+ * into this range:
+ */
+#define PTE_FILE_MAX_BITS       29
+#define pte_to_pgoff(pte)       (pte_val(pte) >> 2)
+#define pgoff_to_pte(off)       __pte((off) << 2 | _PAGE_FILE)
+/* Encode and de-code a swap entry */
+#define __swp_type(x)                   (((x).val >> 2) & 0x3f)
+#define __swp_offset(x)                 ((x).val >> 8)
+#define __swp_entry(type, offset) \
+        ((swp_entry_t) { ((type) << 2) | ((offset) << 8) })
+#define __pte_to_swp_entry(pte)         ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)           __pte((x).val)
+static inline
+int ptep_test_and_clear_dirty(struct vm_area_struct *vma, unsigned long addr,
+                              pte_t *ptep)
+{
+        if (!pte_dirty(*ptep))
+                return 0;
+        return test_and_clear_bit(_PAGE_BIT_DIRTY, &ptep->pte);
+}
+static inline
+int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr,
+                              pte_t *ptep)
+{
+        if (!pte_young(*ptep))
+                return 0;
+        return test_and_clear_bit(_PAGE_BIT_ACCESSED, &ptep->pte);
+}
+static inline
+void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+        pte_val(*ptep) &= ~(__PAGE_PROT_WRITE|__PAGE_PROT_UWAUX);
+}
+static inline void ptep_mkdirty(pte_t *ptep)
+{
+        set_bit(_PAGE_BIT_DIRTY, &ptep->pte);
+}
+/*
+ * Macro to mark a page protection value as "uncacheable".  On processors which
+ * do not support it, this is a no-op.
+ */
+#define pgprot_noncached(prot)  __pgprot(pgprot_val(prot) | _PAGE_CACHE)
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define mk_pte(page, pgprot)    pfn_pte(page_to_pfn(page), (pgprot))
+#define mk_pte_huge(entry) \
+        ((entry).pte |= _PAGE_PRESENT | _PAGE_PSE | _PAGE_VALID)
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+        pte_val(pte) &= _PAGE_CHG_MASK;
+        pte_val(pte) |= pgprot_val(newprot);
+        return pte;
+}
+#define page_pte(page)  page_pte_prot((page), __pgprot(0))
+#define pmd_page_kernel(pmd) \
+        ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+#define pmd_page(pmd)   pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)
+#define pmd_large(pmd) \
+        ((pmd_val(pmd) & (_PAGE_PSE | _PAGE_PRESENT)) == \
+         (_PAGE_PSE | _PAGE_PRESENT))
+/*
+ * the pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD]
+ *
+ * this macro returns the index of the entry in the pgd page which would
+ * control the given virtual address
+ */
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
+/*
+ * pgd_offset() returns a (pgd_t *)
+ * pgd_index() is used get the offset into the pgd page's array of pgd_t's;
+ */
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
+/*
+ * a shortcut which implies the use of the kernel's pgd, instead
+ * of a process's
+ */
+#define pgd_offset_k(address)   pgd_offset(&init_mm, address)
+/*
+ * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD]
+ *
+ * this macro returns the index of the entry in the pmd page which would
+ * control the given virtual address
+ */
+#define pmd_index(address) \
+        (((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
+/*
+ * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
+ *
+ * this macro returns the index of the entry in the pte page which would
+ * control the given virtual address
+ */
+#define pte_index(address) \
+        (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, address) \
+        ((pte_t *) pmd_page_kernel(*(dir)) +  pte_index(address))
+/*
+ * Make a given kernel text page executable/non-executable.
+ * Returns the previous executability setting of that page (which
+ * is used to restore the previous state). Used by the SMP bootup code.
+ * NOTE: this is an __init function for security reasons.
+ */
+static inline int set_kernel_exec(unsigned long vaddr, int enable)
+{
+        return 0;
+}
+#define pte_offset_map(dir, address) \
+        ((pte_t *) page_address(pmd_page(*(dir))) + pte_index(address))
+#define pte_offset_map_nested(dir, address) pte_offset_map(dir, address)
+#define pte_unmap(pte)          do {} while (0)
+#define pte_unmap_nested(pte)   do {} while (0)
+/*
+ * The MN10300 has external MMU info in the form of a TLB: this is adapted from
+ * the kernel page tables containing the necessary information by tlb-mn10300.S
+ */
+extern void update_mmu_cache(struct vm_area_struct *vma,
+                             unsigned long address, pte_t pte);
+#endif /* !__ASSEMBLY__ */
+#define kern_addr_valid(addr)   (1)
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+        remap_pfn_range((vma), (vaddr), (pfn), (size), (prot))
+#define MK_IOSPACE_PFN(space, pfn)      (pfn)
+#define GET_IOSPACE(pfn)                0
+#define GET_PFN(pfn)                    (pfn)
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+#define __HAVE_ARCH_PTEP_MKDIRTY
+#define __HAVE_ARCH_PTE_SAME
+#include <asm-generic/pgtable.h>
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_PGTABLE_H */
diff --git a/arch/mn10300/include/asm/pio-regs.h b/arch/mn10300/include/asm/pio-regs.h
new file mode 100644
index 000000000000..96bc8182d0ba
--- /dev/null
+++ b/arch/mn10300/include/asm/pio-regs.h
@@ -0,0 +1,233 @@
+/* MN10300 On-board I/O port module registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PIO_REGS_H
+#define _ASM_PIO_REGS_H
+#include <asm/cpu-regs.h>
+#include <asm/intctl-regs.h>
+#ifdef __KERNEL__
+/* I/O port 0 */
+#define P0MD                    __SYSREG(0xdb000000, u16)       /* mode reg */
+#define P0MD_0                  0x0003  /* mask */
+#define P0MD_0_IN               0x0000  /* input mode */
+#define P0MD_0_OUT              0x0001  /* output mode */
+#define P0MD_0_TM0IO            0x0002  /* timer 0 I/O mode */
+#define P0MD_0_EYECLK           0x0003  /* test signal output (clock) */
+#define P0MD_1                  0x000c
+#define P0MD_1_IN               0x0000
+#define P0MD_1_OUT              0x0004
+#define P0MD_1_TM1IO            0x0008  /* timer 1 I/O mode */
+#define P0MD_1_EYED             0x000c  /* test signal output (data) */
+#define P0MD_2                  0x0030
+#define P0MD_2_IN               0x0000
+#define P0MD_2_OUT              0x0010
+#define P0MD_2_TM2IO            0x0020  /* timer 2 I/O mode */
+#define P0MD_3                  0x00c0
+#define P0MD_3_IN               0x0000
+#define P0MD_3_OUT              0x0040
+#define P0MD_3_TM3IO            0x0080  /* timer 3 I/O mode */
+#define P0MD_4                  0x0300
+#define P0MD_4_IN               0x0000
+#define P0MD_4_OUT              0x0100
+#define P0MD_4_TM4IO            0x0200  /* timer 4 I/O mode */
+#define P0MD_4_XCTS             0x0300  /* XCTS input for serial port 2 */
+#define P0MD_5                  0x0c00
+#define P0MD_5_IN               0x0000
+#define P0MD_5_OUT              0x0400
+#define P0MD_5_TM5IO            0x0800  /* timer 5 I/O mode */
+#define P0MD_6                  0x3000
+#define P0MD_6_IN               0x0000
+#define P0MD_6_OUT              0x1000
+#define P0MD_6_TM6IOA           0x2000  /* timer 6 I/O mode A */
+#define P0MD_7                  0xc000
+#define P0MD_7_IN               0x0000
+#define P0MD_7_OUT              0x4000
+#define P0MD_7_TM6IOB           0x8000  /* timer 6 I/O mode B */
+#define P0IN                    __SYSREG(0xdb000004, u8)        /* in reg */
+#define P0OUT                   __SYSREG(0xdb000008, u8)        /* out reg */
+#define P0TMIO                  __SYSREG(0xdb00000c, u8)        /* TM pin I/O control reg */
+#define P0TMIO_TM0_IN           0x00
+#define P0TMIO_TM0_OUT          0x01
+#define P0TMIO_TM1_IN           0x00
+#define P0TMIO_TM1_OUT          0x02
+#define P0TMIO_TM2_IN           0x00
+#define P0TMIO_TM2_OUT          0x04
+#define P0TMIO_TM3_IN           0x00
+#define P0TMIO_TM3_OUT          0x08
+#define P0TMIO_TM4_IN           0x00
+#define P0TMIO_TM4_OUT          0x10
+#define P0TMIO_TM5_IN           0x00
+#define P0TMIO_TM5_OUT          0x20
+#define P0TMIO_TM6A_IN          0x00
+#define P0TMIO_TM6A_OUT         0x40
+#define P0TMIO_TM6B_IN          0x00
+#define P0TMIO_TM6B_OUT         0x80
+/* I/O port 1 */
+#define P1MD                    __SYSREG(0xdb000100, u16)       /* mode reg */
+#define P1MD_0                  0x0003  /* mask */
+#define P1MD_0_IN               0x0000  /* input mode */
+#define P1MD_0_OUT              0x0001  /* output mode */
+#define P1MD_0_TM7IO            0x0002  /* timer 7 I/O mode */
+#define P1MD_0_ADTRG            0x0003  /* A/D converter trigger mode */
+#define P1MD_1                  0x000c
+#define P1MD_1_IN               0x0000
+#define P1MD_1_OUT              0x0004
+#define P1MD_1_TM8IO            0x0008  /* timer 8 I/O mode */
+#define P1MD_1_XDMR0            0x000c  /* DMA request input 0 mode */
+#define P1MD_2                  0x0030
+#define P1MD_2_IN               0x0000
+#define P1MD_2_OUT              0x0010
+#define P1MD_2_TM9IO            0x0020  /* timer 9 I/O mode */
+#define P1MD_2_XDMR1            0x0030  /* DMA request input 1 mode */
+#define P1MD_3                  0x00c0
+#define P1MD_3_IN               0x0000
+#define P1MD_3_OUT              0x0040
+#define P1MD_3_TM10IO           0x0080  /* timer 10 I/O mode */
+#define P1MD_3_FRQS0            0x00c0  /* CPU clock multiplier setting input 0 mode */
+#define P1MD_4                  0x0300
+#define P1MD_4_IN               0x0000
+#define P1MD_4_OUT              0x0100
+#define P1MD_4_TM11IO           0x0200  /* timer 11 I/O mode */
+#define P1MD_4_FRQS1            0x0300  /* CPU clock multiplier setting input 1 mode */
+#define P1IN                    __SYSREG(0xdb000104, u8)        /* in reg */
+#define P1OUT                   __SYSREG(0xdb000108, u8)        /* out reg */
+#define P1TMIO                  __SYSREG(0xdb00010c, u8)        /* TM pin I/O control reg */
+#define P1TMIO_TM11_IN          0x00
+#define P1TMIO_TM11_OUT         0x01
+#define P1TMIO_TM10_IN          0x00
+#define P1TMIO_TM10_OUT         0x02
+#define P1TMIO_TM9_IN           0x00
+#define P1TMIO_TM9_OUT          0x04
+#define P1TMIO_TM8_IN           0x00
+#define P1TMIO_TM8_OUT          0x08
+#define P1TMIO_TM7_IN           0x00
+#define P1TMIO_TM7_OUT          0x10
+/* I/O port 2 */
+#define P2MD                    __SYSREG(0xdb000200, u16)       /* mode reg */
+#define P2MD_0                  0x0003  /* mask */
+#define P2MD_0_IN               0x0000  /* input mode */
+#define P2MD_0_OUT              0x0001  /* output mode */
+#define P2MD_0_BOOTBW           0x0003  /* boot bus width selector mode */
+#define P2MD_1                  0x000c
+#define P2MD_1_IN               0x0000
+#define P2MD_1_OUT              0x0004
+#define P2MD_1_BOOTSEL          0x000c  /* boot device selector mode */
+#define P2MD_2                  0x0030
+#define P2MD_2_IN               0x0000
+#define P2MD_2_OUT              0x0010
+#define P2MD_3                  0x00c0
+#define P2MD_3_IN               0x0000
+#define P2MD_3_OUT              0x0040
+#define P2MD_3_CKIO             0x00c0  /* mode */
+#define P2MD_4                  0x0300
+#define P2MD_4_IN               0x0000
+#define P2MD_4_OUT              0x0100
+#define P2MD_4_CMOD             0x0300  /* mode */
+#define P2IN                    __SYSREG(0xdb000204, u8)        /* in reg */
+#define P2OUT                   __SYSREG(0xdb000208, u8)        /* out reg */
+#define P2TMIO                  __SYSREG(0xdb00020c, u8)        /* TM pin I/O control reg */
+/* I/O port 3 */
+#define P3MD                    __SYSREG(0xdb000300, u16)       /* mode reg */
+#define P3MD_0                  0x0003  /* mask */
+#define P3MD_0_IN               0x0000  /* input mode */
+#define P3MD_0_OUT              0x0001  /* output mode */
+#define P3MD_0_AFRXD            0x0002  /* AFR interface mode */
+#define P3MD_1                  0x000c
+#define P3MD_1_IN               0x0000
+#define P3MD_1_OUT              0x0004
+#define P3MD_1_AFTXD            0x0008  /* AFR interface mode */
+#define P3MD_2                  0x0030
+#define P3MD_2_IN               0x0000
+#define P3MD_2_OUT              0x0010
+#define P3MD_2_AFSCLK           0x0020  /* AFR interface mode */
+#define P3MD_3                  0x00c0
+#define P3MD_3_IN               0x0000
+#define P3MD_3_OUT              0x0040
+#define P3MD_3_AFFS             0x0080  /* AFR interface mode */
+#define P3MD_4                  0x0300
+#define P3MD_4_IN               0x0000
+#define P3MD_4_OUT              0x0100
+#define P3MD_4_AFEHC            0x0200  /* AFR interface mode */
+#define P3IN                    __SYSREG(0xdb000304, u8)        /* in reg */
+#define P3OUT                   __SYSREG(0xdb000308, u8)        /* out reg */
+/* I/O port 4 */
+#define P4MD                    __SYSREG(0xdb000400, u16)       /* mode reg */
+#define P4MD_0                  0x0003  /* mask */
+#define P4MD_0_IN               0x0000  /* input mode */
+#define P4MD_0_OUT              0x0001  /* output mode */
+#define P4MD_0_SCL0             0x0002  /* I2C/serial mode */
+#define P4MD_1                  0x000c
+#define P4MD_1_IN               0x0000
+#define P4MD_1_OUT              0x0004
+#define P4MD_1_SDA0             0x0008
+#define P4MD_2                  0x0030
+#define P4MD_2_IN               0x0000
+#define P4MD_2_OUT              0x0010
+#define P4MD_2_SCL1             0x0020
+#define P4MD_3                  0x00c0
+#define P4MD_3_IN               0x0000
+#define P4MD_3_OUT              0x0040
+#define P4MD_3_SDA1             0x0080
+#define P4MD_4                  0x0300
+#define P4MD_4_IN               0x0000
+#define P4MD_4_OUT              0x0100
+#define P4MD_4_SBO0             0x0200
+#define P4MD_5                  0x0c00
+#define P4MD_5_IN               0x0000
+#define P4MD_5_OUT              0x0400
+#define P4MD_5_SBO1             0x0800
+#define P4MD_6                  0x3000
+#define P4MD_6_IN               0x0000
+#define P4MD_6_OUT              0x1000
+#define P4MD_6_SBT0             0x2000
+#define P4MD_7                  0xc000
+#define P4MD_7_IN               0x0000
+#define P4MD_7_OUT              0x4000
+#define P4MD_7_SBT1             0x8000
+#define P4IN                    __SYSREG(0xdb000404, u8)        /* in reg */
+#define P4OUT                   __SYSREG(0xdb000408, u8)        /* out reg */
+/* I/O port 5 */
+#define P5MD                    __SYSREG(0xdb000500, u16)       /* mode reg */
+#define P5MD_0                  0x0003  /* mask */
+#define P5MD_0_IN               0x0000  /* input mode */
+#define P5MD_0_OUT              0x0001  /* output mode */
+#define P5MD_0_IRTXD            0x0002  /* IrDA mode */
+#define P5MD_0_SOUT             0x0004  /* serial mode */
+#define P5MD_1                  0x000c
+#define P5MD_1_IN               0x0000
+#define P5MD_1_OUT              0x0004
+#define P5MD_1_IRRXDS           0x0008  /* IrDA mode */
+#define P5MD_1_SIN              0x000c  /* serial mode */
+#define P5MD_2                  0x0030
+#define P5MD_2_IN               0x0000
+#define P5MD_2_OUT              0x0010
+#define P5MD_2_IRRXDF           0x0020  /* IrDA mode */
+#define P5IN                    __SYSREG(0xdb000504, u8)        /* in reg */
+#define P5OUT                   __SYSREG(0xdb000508, u8)        /* out reg */
+#endif /* __KERNEL__ */
+#endif /* _ASM_PIO_REGS_H */
diff --git a/arch/mn10300/include/asm/poll.h b/arch/mn10300/include/asm/poll.h
new file mode 100644
index 000000000000..c98509d3149e
--- /dev/null
+++ b/arch/mn10300/include/asm/poll.h
@@ -0,0 +1 @@
+#include <asm-generic/poll.h>
diff --git a/arch/mn10300/include/asm/posix_types.h b/arch/mn10300/include/asm/posix_types.h
new file mode 100644
index 000000000000..077567c37798
--- /dev/null
+++ b/arch/mn10300/include/asm/posix_types.h
@@ -0,0 +1,132 @@
+/* MN10300 POSIX types
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_POSIX_TYPES_H
+#define _ASM_POSIX_TYPES_H
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+typedef unsigned long   __kernel_ino_t;
+typedef unsigned short  __kernel_mode_t;
+typedef unsigned short  __kernel_nlink_t;
+typedef long            __kernel_off_t;
+typedef int             __kernel_pid_t;
+typedef unsigned short  __kernel_ipc_pid_t;
+typedef unsigned short  __kernel_uid_t;
+typedef unsigned short  __kernel_gid_t;
+typedef unsigned long   __kernel_size_t;
+typedef long            __kernel_ssize_t;
+typedef int             __kernel_ptrdiff_t;
+typedef long            __kernel_time_t;
+typedef long            __kernel_suseconds_t;
+typedef long            __kernel_clock_t;
+typedef int             __kernel_timer_t;
+typedef int             __kernel_clockid_t;
+typedef int             __kernel_daddr_t;
+typedef char *          __kernel_caddr_t;
+typedef unsigned short  __kernel_uid16_t;
+typedef unsigned short  __kernel_gid16_t;
+typedef unsigned int    __kernel_uid32_t;
+typedef unsigned int    __kernel_gid32_t;
+typedef unsigned short  __kernel_old_uid_t;
+typedef unsigned short  __kernel_old_gid_t;
+typedef unsigned short  __kernel_old_dev_t;
+#ifdef __GNUC__
+typedef long long       __kernel_loff_t;
+#endif
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+        int     val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+        int     __val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+#undef  __FD_SET
+static inline void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+        unsigned long __tmp = __fd / __NFDBITS;
+        unsigned long __rem = __fd % __NFDBITS;
+        __fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
+}
+#undef  __FD_CLR
+static inline void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+        unsigned long __tmp = __fd / __NFDBITS;
+        unsigned long __rem = __fd % __NFDBITS;
+        __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
+}
+#undef  __FD_ISSET
+static inline int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
+{
+        unsigned long __tmp = __fd / __NFDBITS;
+        unsigned long __rem = __fd % __NFDBITS;
+        return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
+}
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef  __FD_ZERO
+static inline void __FD_ZERO(__kernel_fd_set *__p)
+{
+        unsigned long *__tmp = __p->fds_bits;
+        int __i;
+        if (__builtin_constant_p(__FDSET_LONGS)) {
+                switch (__FDSET_LONGS) {
+                case 16:
+                        __tmp[ 0] = 0; __tmp[ 1] = 0;
+                        __tmp[ 2] = 0; __tmp[ 3] = 0;
+                        __tmp[ 4] = 0; __tmp[ 5] = 0;
+                        __tmp[ 6] = 0; __tmp[ 7] = 0;
+                        __tmp[ 8] = 0; __tmp[ 9] = 0;
+                        __tmp[10] = 0; __tmp[11] = 0;
+                        __tmp[12] = 0; __tmp[13] = 0;
+                        __tmp[14] = 0; __tmp[15] = 0;
+                        return;
+                case 8:
+                        __tmp[ 0] = 0; __tmp[ 1] = 0;
+                        __tmp[ 2] = 0; __tmp[ 3] = 0;
+                        __tmp[ 4] = 0; __tmp[ 5] = 0;
+                        __tmp[ 6] = 0; __tmp[ 7] = 0;
+                        return;
+                case 4:
+                        __tmp[ 0] = 0; __tmp[ 1] = 0;
+                        __tmp[ 2] = 0; __tmp[ 3] = 0;
+                        return;
+                }
+        }
+        __i = __FDSET_LONGS;
+        while (__i) {
+                __i--;
+                *__tmp = 0;
+                __tmp++;
+        }
+}
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#endif /* _ASM_POSIX_TYPES_H */
diff --git a/arch/mn10300/include/asm/proc-mn103e010/cache.h b/arch/mn10300/include/asm/proc-mn103e010/cache.h
new file mode 100644
index 000000000000..bdc1f9a59b4c
--- /dev/null
+++ b/arch/mn10300/include/asm/proc-mn103e010/cache.h
@@ -0,0 +1,33 @@
+/* MN103E010 Cache specification
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PROC_CACHE_H
+#define _ASM_PROC_CACHE_H
+/* L1 cache */
+#define L1_CACHE_NWAYS          4       /* number of ways in caches */
+#define L1_CACHE_NENTRIES       256     /* number of entries in each way */
+#define L1_CACHE_BYTES          16      /* bytes per entry */
+#define L1_CACHE_SHIFT          4       /* shift for bytes per entry */
+#define L1_CACHE_WAYDISP        0x1000  /* displacement of one way from the next */
+#define L1_CACHE_TAG_VALID      0x00000001      /* cache tag valid bit */
+#define L1_CACHE_TAG_DIRTY      0x00000008      /* data cache tag dirty bit */
+#define L1_CACHE_TAG_ENTRY      0x00000ff0      /* cache tag entry address mask */
+#define L1_CACHE_TAG_ADDRESS    0xfffff000      /* cache tag line address mask */
+/*
+ * specification of the interval between interrupt checking intervals whilst
+ * managing the cache with the interrupts disabled
+ */
+#define MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL     4
+#endif /* _ASM_PROC_CACHE_H */
diff --git a/arch/mn10300/include/asm/proc-mn103e010/clock.h b/arch/mn10300/include/asm/proc-mn103e010/clock.h
new file mode 100644
index 000000000000..caf998350633
--- /dev/null
+++ b/arch/mn10300/include/asm/proc-mn103e010/clock.h
@@ -0,0 +1,18 @@
+/* MN103E010-specific clocks
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PROC_CLOCK_H
+#define _ASM_PROC_CLOCK_H
+#include <asm/unit/clock.h>
+#define MN10300_WDCLK           MN10300_IOCLK
+#endif /* _ASM_PROC_CLOCK_H */
diff --git a/arch/mn10300/include/asm/proc-mn103e010/irq.h b/arch/mn10300/include/asm/proc-mn103e010/irq.h
new file mode 100644
index 000000000000..aa6ee8f98b1b
--- /dev/null
+++ b/arch/mn10300/include/asm/proc-mn103e010/irq.h
@@ -0,0 +1,34 @@
+/* MN103E010 On-board interrupt controller numbers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PROC_IRQ_H
+#define _ASM_PROC_IRQ_H
+#ifdef __KERNEL__
+#define GxICR_NUM_IRQS          42
+#define GxICR_NUM_XIRQS         8
+#define XIRQ0           34
+#define XIRQ1           35
+#define XIRQ2           36
+#define XIRQ3           37
+#define XIRQ4           38
+#define XIRQ5           39
+#define XIRQ6           40
+#define XIRQ7           41
+#define XIRQ2IRQ(num)   (XIRQ0 + num)
+#endif /* __KERNEL__ */
+#endif /* _ASM_PROC_IRQ_H */
diff --git a/arch/mn10300/include/asm/proc-mn103e010/proc.h b/arch/mn10300/include/asm/proc-mn103e010/proc.h
new file mode 100644
index 000000000000..22a2b93f70b7
--- /dev/null
+++ b/arch/mn10300/include/asm/proc-mn103e010/proc.h
@@ -0,0 +1,18 @@
+/* MN103E010 Processor description
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PROC_PROC_H
+#define _ASM_PROC_PROC_H
+#define PROCESSOR_VENDOR_NAME   "Matsushita"
+#define PROCESSOR_MODEL_NAME    "mn103e010"
+#endif /* _ASM_PROC_PROC_H */
diff --git a/arch/mn10300/include/asm/processor.h b/arch/mn10300/include/asm/processor.h
new file mode 100644
index 000000000000..73239271873d
--- /dev/null
+++ b/arch/mn10300/include/asm/processor.h
@@ -0,0 +1,186 @@
+/* MN10300 Processor specifics
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PROCESSOR_H
+#define _ASM_PROCESSOR_H
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include <asm/cpu-regs.h>
+#include <linux/threads.h>
+/* Forward declaration, a strange C thing */
+struct task_struct;
+struct mm_struct;
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr()                     \
+({                                              \
+        void *__pc;                             \
+        asm("mov pc,%0" : "=a"(__pc));          \
+        __pc;                                   \
+})
+extern void show_registers(struct pt_regs *regs);
+/*
+ *  CPU type and hardware bug flags. Kept separately for each CPU.
+ *  Members of this structure are referenced in head.S, so think twice
+ *  before touching them. [mj]
+ */
+struct mn10300_cpuinfo {
+        int             type;
+        unsigned long   loops_per_sec;
+        char            hard_math;
+        unsigned long   *pgd_quick;
+        unsigned long   *pte_quick;
+        unsigned long   pgtable_cache_sz;
+};
+extern struct mn10300_cpuinfo boot_cpu_data;
+#define cpu_data &boot_cpu_data
+#define current_cpu_data boot_cpu_data
+extern void identify_cpu(struct mn10300_cpuinfo *);
+extern void print_cpu_info(struct mn10300_cpuinfo *);
+extern void dodgy_tsc(void);
+#define cpu_relax() barrier()
+/*
+ * User space process size: 1.75GB (default).
+ */
+#define TASK_SIZE               0x70000000
+/*
+ * Where to put the userspace stack by default
+ */
+#define STACK_TOP               0x70000000
+#define STACK_TOP_MAX           STACK_TOP
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE      0x30000000
+typedef struct {
+        unsigned long   seg;
+} mm_segment_t;
+struct fpu_state_struct {
+        unsigned long   fs[32];         /* fpu registers */
+        unsigned long   fpcr;           /* fpu control register */
+};
+struct thread_struct {
+        struct pt_regs          *uregs;         /* userspace register frame */
+        unsigned long           pc;             /* kernel PC */
+        unsigned long           sp;             /* kernel SP */
+        unsigned long           a3;             /* kernel FP */
+        unsigned long           wchan;
+        unsigned long           usp;
+        struct pt_regs          *__frame;
+        unsigned long           fpu_flags;
+#define THREAD_USING_FPU        0x00000001      /* T if this task is using the FPU */
+        struct fpu_state_struct fpu_state;
+};
+#define INIT_THREAD                             \
+{                                               \
+        .uregs          = init_uregs,           \
+        .pc             = 0,                    \
+        .sp             = 0,                    \
+        .a3             = 0,                    \
+        .wchan          = 0,                    \
+        .__frame        = NULL,                 \
+}
+#define INIT_MMAP \
+{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, \
+  NULL, NULL }
+/*
+ * do necessary setup to start up a newly executed thread
+ * - need to discard the frame stacked by the kernel thread invoking the execve
+ *   syscall (see RESTORE_ALL macro)
+ */
+#define start_thread(regs, new_pc, new_sp) do {         \
+        set_fs(USER_DS);                                \
+        __frame = current->thread.uregs;                \
+        __frame->epsw = EPSW_nSL | EPSW_IE | EPSW_IM;   \
+        __frame->pc = new_pc;                           \
+        __frame->sp = new_sp;                           \
+} while (0)
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+/* Prepare to copy thread state - unlazy all lazy status */
+extern void prepare_to_copy(struct task_struct *tsk);
+/*
+ * create a kernel thread without removing it from tasklists
+ */
+extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+/*
+ * Return saved PC of a blocked thread.
+ */
+extern unsigned long thread_saved_pc(struct task_struct *tsk);
+unsigned long get_wchan(struct task_struct *p);
+#define task_pt_regs(task)                                              \
+({                                                                      \
+       struct pt_regs *__regs__;                                        \
+       __regs__ = (struct pt_regs *) (KSTK_TOP(task_stack_page(task)) - 8); \
+       __regs__ - 1;                                                    \
+})
+#define KSTK_EIP(task) (task_pt_regs(task)->pc)
+#define KSTK_ESP(task) (task_pt_regs(task)->sp)
+#define KSTK_TOP(info)                          \
+({                                              \
+        (unsigned long)(info) + THREAD_SIZE;    \
+})
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+static inline void prefetch(const void *x)
+{
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+#ifdef CONFIG_MN10300_PROC_MN103E010
+        asm volatile ("nop; nop; dcpf (%0)" : : "r"(x));
+#else
+        asm volatile ("dcpf (%0)" : : "r"(x));
+#endif
+#endif
+}
+static inline void prefetchw(const void *x)
+{
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+#ifdef CONFIG_MN10300_PROC_MN103E010
+        asm volatile ("nop; nop; dcpf (%0)" : : "r"(x));
+#else
+        asm volatile ("dcpf (%0)" : : "r"(x));
+#endif
+#endif
+}
+#endif /* _ASM_PROCESSOR_H */
diff --git a/arch/mn10300/include/asm/ptrace.h b/arch/mn10300/include/asm/ptrace.h
new file mode 100644
index 000000000000..7b06cc623d8b
--- /dev/null
+++ b/arch/mn10300/include/asm/ptrace.h
@@ -0,0 +1,103 @@
+/* MN10300 Exception frame layout and ptrace constants
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PTRACE_H
+#define _ASM_PTRACE_H
+#define PT_A3           0
+#define PT_A2           1
+#define PT_D3           2
+#define PT_D2           3
+#define PT_MCVF         4
+#define PT_MCRL         5
+#define PT_MCRH         6
+#define PT_MDRQ         7
+#define PT_E1           8
+#define PT_E0           9
+#define PT_E7           10
+#define PT_E6           11
+#define PT_E5           12
+#define PT_E4           13
+#define PT_E3           14
+#define PT_E2           15
+#define PT_SP           16
+#define PT_LAR          17
+#define PT_LIR          18
+#define PT_MDR          19
+#define PT_A1           20
+#define PT_A0           21
+#define PT_D1           22
+#define PT_D0           23
+#define PT_ORIG_D0      24
+#define PT_EPSW         25
+#define PT_PC           26
+#define NR_PTREGS       27
+#ifndef __ASSEMBLY__
+/*
+ * This defines the way registers are stored in the event of an exception
+ * - the strange order is due to the MOVM instruction
+ */
+struct pt_regs {
+        unsigned long           a3;             /* syscall arg 3 */
+        unsigned long           a2;             /* syscall arg 4 */
+        unsigned long           d3;             /* syscall arg 5 */
+        unsigned long           d2;             /* syscall arg 6 */
+        unsigned long           mcvf;
+        unsigned long           mcrl;
+        unsigned long           mcrh;
+        unsigned long           mdrq;
+        unsigned long           e1;
+        unsigned long           e0;
+        unsigned long           e7;
+        unsigned long           e6;
+        unsigned long           e5;
+        unsigned long           e4;
+        unsigned long           e3;
+        unsigned long           e2;
+        unsigned long           sp;
+        unsigned long           lar;
+        unsigned long           lir;
+        unsigned long           mdr;
+        unsigned long           a1;
+        unsigned long           a0;             /* syscall arg 1 */
+        unsigned long           d1;             /* syscall arg 2 */
+        unsigned long           d0;             /* syscall ret */
+        struct pt_regs          *next;          /* next frame pointer */
+        unsigned long           orig_d0;        /* syscall number */
+        unsigned long           epsw;
+        unsigned long           pc;
+};
+#endif
+extern struct pt_regs *__frame; /* current frame pointer */
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+/* options set using PTRACE_SETOPTIONS */
+#define PTRACE_O_TRACESYSGOOD     0x00000001
+#if defined(__KERNEL__)
+#if !defined(__ASSEMBLY__)
+#define user_mode(regs)                 (((regs)->epsw & EPSW_nSL) == EPSW_nSL)
+#define instruction_pointer(regs)       ((regs)->pc)
+extern void show_regs(struct pt_regs *);
+#endif  /*  !__ASSEMBLY  */
+#define profile_pc(regs) ((regs)->pc)
+#endif  /*  __KERNEL__  */
+#endif /* _ASM_PTRACE_H */
diff --git a/arch/mn10300/include/asm/reset-regs.h b/arch/mn10300/include/asm/reset-regs.h
new file mode 100644
index 000000000000..174523d50132
--- /dev/null
+++ b/arch/mn10300/include/asm/reset-regs.h
@@ -0,0 +1,64 @@
+/* MN10300 Reset controller and watchdog timer definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_RESET_REGS_H
+#define _ASM_RESET_REGS_H
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+#ifdef __KERNEL__
+#ifdef CONFIG_MN10300_WD_TIMER
+#define ARCH_HAS_NMI_WATCHDOG           /* See include/linux/nmi.h */
+#endif
+/*
+ * watchdog timer registers
+ */
+#define WDBC                    __SYSREGC(0xc0001000, u8) /* watchdog binary counter reg */
+#define WDCTR                   __SYSREG(0xc0001002, u8)  /* watchdog timer control reg */
+#define WDCTR_WDCK              0x07    /* clock source selection */
+#define WDCTR_WDCK_256th        0x00    /* - OSCI/256 */
+#define WDCTR_WDCK_1024th       0x01    /* - OSCI/1024 */
+#define WDCTR_WDCK_2048th       0x02    /* - OSCI/2048 */
+#define WDCTR_WDCK_16384th      0x03    /* - OSCI/16384 */
+#define WDCTR_WDCK_65536th      0x04    /* - OSCI/65536 */
+#define WDCTR_WDRST             0x40    /* binary counter reset */
+#define WDCTR_WDCNE             0x80    /* watchdog timer enable */
+#define RSTCTR                  __SYSREG(0xc0001004, u8) /* reset control reg */
+#define RSTCTR_CHIPRST          0x01    /* chip reset */
+#define RSTCTR_DBFRST           0x02    /* double fault reset flag */
+#define RSTCTR_WDTRST           0x04    /* watchdog timer reset flag */
+#define RSTCTR_WDREN            0x08    /* watchdog timer reset enable */
+#ifndef __ASSEMBLY__
+static inline void mn10300_proc_hard_reset(void)
+{
+        RSTCTR &= ~RSTCTR_CHIPRST;
+        RSTCTR |= RSTCTR_CHIPRST;
+}
+extern unsigned int watchdog_alert_counter;
+extern void watchdog_go(void);
+extern asmlinkage void watchdog_handler(void);
+extern asmlinkage
+void watchdog_interrupt(struct pt_regs *, enum exception_code);
+#endif
+#endif /* __KERNEL__ */
+#endif /* _ASM_RESET_REGS_H */
diff --git a/arch/mn10300/include/asm/resource.h b/arch/mn10300/include/asm/resource.h
new file mode 100644
index 000000000000..04bc4db8921b
--- /dev/null
+++ b/arch/mn10300/include/asm/resource.h
@@ -0,0 +1 @@
+#include <asm-generic/resource.h>
diff --git a/arch/mn10300/include/asm/rtc-regs.h b/arch/mn10300/include/asm/rtc-regs.h
new file mode 100644
index 000000000000..c42deefaec11
--- /dev/null
+++ b/arch/mn10300/include/asm/rtc-regs.h
@@ -0,0 +1,86 @@
+/* MN10300 on-chip Real-Time Clock registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_RTC_REGS_H
+#define _ASM_RTC_REGS_H
+#include <asm/intctl-regs.h>
+#ifdef __KERNEL__
+#define RTSCR                   __SYSREG(0xd8600000, u8) /* RTC seconds count reg */
+#define RTSAR                   __SYSREG(0xd8600001, u8) /* RTC seconds alarm reg */
+#define RTMCR                   __SYSREG(0xd8600002, u8) /* RTC minutes count reg */
+#define RTMAR                   __SYSREG(0xd8600003, u8) /* RTC minutes alarm reg */
+#define RTHCR                   __SYSREG(0xd8600004, u8) /* RTC hours count reg */
+#define RTHAR                   __SYSREG(0xd8600005, u8) /* RTC hours alarm reg */
+#define RTDWCR                  __SYSREG(0xd8600006, u8) /* RTC day of the week count reg */
+#define RTDMCR                  __SYSREG(0xd8600007, u8) /* RTC days count reg */
+#define RTMTCR                  __SYSREG(0xd8600008, u8) /* RTC months count reg */
+#define RTYCR                   __SYSREG(0xd8600009, u8) /* RTC years count reg */
+#define RTCRA                   __SYSREG(0xd860000a, u8)/* RTC control reg A */
+#define RTCRA_RS                0x0f    /* periodic timer interrupt cycle setting */
+#define RTCRA_RS_NONE           0x00    /* - off */
+#define RTCRA_RS_3_90625ms      0x01    /* - 3.90625ms  (1/256s) */
+#define RTCRA_RS_7_8125ms       0x02    /* - 7.8125ms   (1/128s) */
+#define RTCRA_RS_122_070us      0x03    /* - 122.070us  (1/8192s) */
+#define RTCRA_RS_244_141us      0x04    /* - 244.141us  (1/4096s) */
+#define RTCRA_RS_488_281us      0x05    /* - 488.281us  (1/2048s) */
+#define RTCRA_RS_976_5625us     0x06    /* - 976.5625us (1/1024s) */
+#define RTCRA_RS_1_953125ms     0x07    /* - 1.953125ms (1/512s) */
+#define RTCRA_RS_3_90624ms      0x08    /* - 3.90624ms  (1/256s) */
+#define RTCRA_RS_7_8125ms_b     0x09    /* - 7.8125ms   (1/128s) */
+#define RTCRA_RS_15_625ms       0x0a    /* - 15.625ms   (1/64s) */
+#define RTCRA_RS_31_25ms        0x0b    /* - 31.25ms    (1/32s) */
+#define RTCRA_RS_62_5ms         0x0c    /* - 62.5ms     (1/16s) */
+#define RTCRA_RS_125ms          0x0d    /* - 125ms      (1/8s) */
+#define RTCRA_RS_250ms          0x0e    /* - 250ms      (1/4s) */
+#define RTCRA_RS_500ms          0x0f    /* - 500ms      (1/2s) */
+#define RTCRA_DVR               0x40    /* divider reset */
+#define RTCRA_UIP               0x80    /* clock update flag */
+#define RTCRB                   __SYSREG(0xd860000b, u8) /* RTC control reg B */
+#define RTCRB_DSE               0x01    /* daylight savings time enable */
+#define RTCRB_TM                0x02    /* time format */
+#define RTCRB_TM_12HR           0x00    /* - 12 hour format */
+#define RTCRB_TM_24HR           0x02    /* - 24 hour format */
+#define RTCRB_DM                0x04    /* numeric value format */
+#define RTCRB_DM_BCD            0x00    /* - BCD */
+#define RTCRB_DM_BINARY         0x04    /* - binary */
+#define RTCRB_UIE               0x10    /* update interrupt disable */
+#define RTCRB_AIE               0x20    /* alarm interrupt disable */
+#define RTCRB_PIE               0x40    /* periodic interrupt disable */
+#define RTCRB_SET               0x80    /* clock update enable */
+#define RTSRC                   __SYSREG(0xd860000c, u8) /* RTC status reg C */
+#define RTSRC_UF                0x10    /* update end interrupt flag */
+#define RTSRC_AF                0x20    /* alarm interrupt flag */
+#define RTSRC_PF                0x40    /* periodic interrupt flag */
+#define RTSRC_IRQF              0x80    /* interrupt flag */
+#define RTIRQ                   32
+#define RTICR                   GxICR(RTIRQ)
+/*
+ * MC146818 RTC compatibility defs for the MN10300 on-chip RTC
+ */
+#define RTC_PORT(x)             0xd8600000
+#define RTC_ALWAYS_BCD          1       /* RTC operates in binary mode */
+#define CMOS_READ(addr)         __SYSREG(0xd8600000 + (addr), u8)
+#define CMOS_WRITE(val, addr)   \
+        do { __SYSREG(0xd8600000 + (addr), u8) = val; } while (0)
+#define RTC_IRQ                 RTIRQ
+#endif /* __KERNEL__ */
+#endif /* _ASM_RTC_REGS_H */
diff --git a/arch/mn10300/include/asm/rtc.h b/arch/mn10300/include/asm/rtc.h
new file mode 100644
index 000000000000..c295194cc703
--- /dev/null
+++ b/arch/mn10300/include/asm/rtc.h
@@ -0,0 +1,41 @@
+/* MN10300 Real time clock definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_RTC_H
+#define _ASM_RTC_H
+#ifdef CONFIG_MN10300_RTC
+#include <linux/init.h>
+extern void check_rtc_time(void);
+extern void __init calibrate_clock(void);
+extern unsigned long __init get_initial_rtc_time(void);
+#else /* !CONFIG_MN10300_RTC */
+static inline void check_rtc_time(void)
+{
+}
+static inline void calibrate_clock(void)
+{
+}
+static inline unsigned long get_initial_rtc_time(void)
+{
+        return 0;
+}
+#endif /* !CONFIG_MN10300_RTC */
+#include <asm-generic/rtc.h>
+#endif /* _ASM_RTC_H */
diff --git a/arch/mn10300/include/asm/scatterlist.h b/arch/mn10300/include/asm/scatterlist.h
new file mode 100644
index 000000000000..67535901b9ff
--- /dev/null
+++ b/arch/mn10300/include/asm/scatterlist.h
@@ -0,0 +1,55 @@
+/* MN10300 Scatterlist definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SCATTERLIST_H
+#define _ASM_SCATTERLIST_H
+#include <asm/types.h>
+/*
+ * Drivers must set either ->address or (preferred) page and ->offset
+ * to indicate where data must be transferred to/from.
+ *
+ * Using page is recommended since it handles highmem data as well as
+ * low mem. ->address is restricted to data which has a virtual mapping, and
+ * it will go away in the future. Updating to page can be automated very
+ * easily -- something like
+ *
+ * sg->address = some_ptr;
+ *
+ * can be rewritten as
+ *
+ * sg_set_page(virt_to_page(some_ptr));
+ * sg->offset = (unsigned long) some_ptr & ~PAGE_MASK;
+ *
+ * and that's it. There's no excuse for not highmem enabling YOUR driver. /jens
+ */
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+        unsigned long   sg_magic;
+#endif
+        unsigned long   page_link;
+        unsigned int    offset;         /* for highmem, page offset */
+        dma_addr_t      dma_address;
+        unsigned int    length;
+};
+#define ISA_DMA_THRESHOLD (0x00ffffff)
+/*
+ * These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns.
+ */
+#define sg_dma_address(sg)      ((sg)->dma_address)
+#define sg_dma_len(sg)          ((sg)->length)
+#endif /* _ASM_SCATTERLIST_H */
diff --git a/arch/mn10300/include/asm/sections.h b/arch/mn10300/include/asm/sections.h
new file mode 100644
index 000000000000..2b8c5160388f
--- /dev/null
+++ b/arch/mn10300/include/asm/sections.h
@@ -0,0 +1 @@
+#include <asm-generic/sections.h>
diff --git a/arch/mn10300/include/asm/sembuf.h b/arch/mn10300/include/asm/sembuf.h
new file mode 100644
index 000000000000..301f3f9d8aa9
--- /dev/null
+++ b/arch/mn10300/include/asm/sembuf.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_SEMBUF_H
+#define _ASM_SEMBUF_H
+/*
+ * The semid64_ds structure for MN10300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+struct semid64_ds {
+        struct ipc64_perm sem_perm;             /* permissions .. see ipc.h */
+        __kernel_time_t sem_otime;              /* last semop time */
+        unsigned long   __unused1;
+        __kernel_time_t sem_ctime;              /* last change time */
+        unsigned long   __unused2;
+        unsigned long   sem_nsems;              /* no. of semaphores in array */
+        unsigned long   __unused3;
+        unsigned long   __unused4;
+};
+#endif /* _ASM_SEMBUF_H */
diff --git a/arch/mn10300/include/asm/serial-regs.h b/arch/mn10300/include/asm/serial-regs.h
new file mode 100644
index 000000000000..6498469e93ac
--- /dev/null
+++ b/arch/mn10300/include/asm/serial-regs.h
@@ -0,0 +1,160 @@
+/* MN10300 on-board serial port module registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SERIAL_REGS_H
+#define _ASM_SERIAL_REGS_H
+#include <asm/cpu-regs.h>
+#include <asm/intctl-regs.h>
+#ifdef __KERNEL__
+/* serial port 0 */
+#define SC0CTR                  __SYSREG(0xd4002000, u16)       /* control reg */
+#define SC01CTR_CK              0x0007  /* clock source select */
+#define SC0CTR_CK_TM8UFLOW_8    0x0000  /* - 1/8 timer 8 underflow (serial port 0 only) */
+#define SC1CTR_CK_TM9UFLOW_8    0x0000  /* - 1/8 timer 9 underflow (serial port 1 only) */
+#define SC01CTR_CK_IOCLK_8      0x0001  /* - 1/8 IOCLK */
+#define SC01CTR_CK_IOCLK_32     0x0002  /* - 1/32 IOCLK */
+#define SC0CTR_CK_TM2UFLOW_2    0x0003  /* - 1/2 timer 2 underflow (serial port 0 only) */
+#define SC1CTR_CK_TM3UFLOW_2    0x0003  /* - 1/2 timer 3 underflow (serial port 1 only) */
+#define SC0CTR_CK_TM0UFLOW_8    0x0004  /* - 1/8 timer 1 underflow (serial port 0 only) */
+#define SC1CTR_CK_TM1UFLOW_8    0x0004  /* - 1/8 timer 2 underflow (serial port 1 only) */
+#define SC0CTR_CK_TM2UFLOW_8    0x0005  /* - 1/8 timer 2 underflow (serial port 0 only) */
+#define SC1CTR_CK_TM3UFLOW_8    0x0005  /* - 1/8 timer 3 underflow (serial port 1 only) */
+#define SC01CTR_CK_EXTERN_8     0x0006  /* - 1/8 external closk */
+#define SC01CTR_CK_EXTERN       0x0007  /* - external closk */
+#define SC01CTR_STB             0x0008  /* stop bit select */
+#define SC01CTR_STB_1BIT        0x0000  /* - 1 stop bit */
+#define SC01CTR_STB_2BIT        0x0008  /* - 2 stop bits */
+#define SC01CTR_PB              0x0070  /* parity bit select */
+#define SC01CTR_PB_NONE         0x0000  /* - no parity */
+#define SC01CTR_PB_FIXED0       0x0040  /* - fixed at 0 */
+#define SC01CTR_PB_FIXED1       0x0050  /* - fixed at 1 */
+#define SC01CTR_PB_EVEN         0x0060  /* - even parity */
+#define SC01CTR_PB_ODD          0x0070  /* - odd parity */
+#define SC01CTR_CLN             0x0080  /* character length */
+#define SC01CTR_CLN_7BIT        0x0000  /* - 7 bit chars */
+#define SC01CTR_CLN_8BIT        0x0080  /* - 8 bit chars */
+#define SC01CTR_TOE             0x0100  /* T input output enable */
+#define SC01CTR_OD              0x0200  /* bit order select */
+#define SC01CTR_OD_LSBFIRST     0x0000  /* - LSB first */
+#define SC01CTR_OD_MSBFIRST     0x0200  /* - MSB first */
+#define SC01CTR_MD              0x0c00  /* mode select */
+#define SC01CTR_MD_STST_SYNC    0x0000  /* - start-stop synchronous */
+#define SC01CTR_MD_CLOCK_SYNC1  0x0400  /* - clock synchronous 1 */
+#define SC01CTR_MD_I2C          0x0800  /* - I2C mode */
+#define SC01CTR_MD_CLOCK_SYNC2  0x0c00  /* - clock synchronous 2 */
+#define SC01CTR_IIC             0x1000  /* I2C mode select */
+#define SC01CTR_BKE             0x2000  /* break transmit enable */
+#define SC01CTR_RXE             0x4000  /* receive enable */
+#define SC01CTR_TXE             0x8000  /* transmit enable */
+#define SC0ICR                  __SYSREG(0xd4002004, u8)        /* interrupt control reg */
+#define SC01ICR_DMD             0x80    /* output data mode */
+#define SC01ICR_TD              0x20    /* transmit DMA trigger cause */
+#define SC01ICR_TI              0x10    /* transmit interrupt cause */
+#define SC01ICR_RES             0x04    /* receive error select */
+#define SC01ICR_RI              0x01    /* receive interrupt cause */
+#define SC0TXB                  __SYSREG(0xd4002008, u8)        /* transmit buffer reg */
+#define SC0RXB                  __SYSREG(0xd4002009, u8)        /* receive buffer reg */
+#define SC0STR                  __SYSREG(0xd400200c, u16)       /* status reg */
+#define SC01STR_OEF             0x0001  /* overrun error found */
+#define SC01STR_PEF             0x0002  /* parity error found */
+#define SC01STR_FEF             0x0004  /* framing error found */
+#define SC01STR_RBF             0x0010  /* receive buffer status */
+#define SC01STR_TBF             0x0020  /* transmit buffer status */
+#define SC01STR_RXF             0x0040  /* receive status */
+#define SC01STR_TXF             0x0080  /* transmit status */
+#define SC01STR_STF             0x0100  /* I2C start sequence found */
+#define SC01STR_SPF             0x0200  /* I2C stop sequence found */
+#define SC0RXIRQ                20      /* timer 0 Receive IRQ */
+#define SC0TXIRQ                21      /* timer 0 Transmit IRQ */
+#define SC0RXICR                GxICR(SC0RXIRQ) /* serial 0 receive intr ctrl reg */
+#define SC0TXICR                GxICR(SC0TXIRQ) /* serial 0 transmit intr ctrl reg */
+/* serial port 1 */
+#define SC1CTR                  __SYSREG(0xd4002010, u16)       /* serial port 1 control */
+#define SC1ICR                  __SYSREG(0xd4002014, u8)        /* interrupt control reg */
+#define SC1TXB                  __SYSREG(0xd4002018, u8)        /* transmit buffer reg */
+#define SC1RXB                  __SYSREG(0xd4002019, u8)        /* receive buffer reg */
+#define SC1STR                  __SYSREG(0xd400201c, u16)       /* status reg */
+#define SC1RXIRQ                22      /* timer 1 Receive IRQ */
+#define SC1TXIRQ                23      /* timer 1 Transmit IRQ */
+#define SC1RXICR                GxICR(SC1RXIRQ) /* serial 1 receive intr ctrl reg */
+#define SC1TXICR                GxICR(SC1TXIRQ) /* serial 1 transmit intr ctrl reg */
+/* serial port 2 */
+#define SC2CTR                  __SYSREG(0xd4002020, u16)       /* control reg */
+#define SC2CTR_CK               0x0003  /* clock source select */
+#define SC2CTR_CK_TM10UFLOW     0x0000  /* - timer 10 underflow */
+#define SC2CTR_CK_TM2UFLOW      0x0001  /* - timer 2 underflow */
+#define SC2CTR_CK_EXTERN        0x0002  /* - external closk */
+#define SC2CTR_CK_TM3UFLOW      0x0003  /* - timer 3 underflow */
+#define SC2CTR_STB              0x0008  /* stop bit select */
+#define SC2CTR_STB_1BIT         0x0000  /* - 1 stop bit */
+#define SC2CTR_STB_2BIT         0x0008  /* - 2 stop bits */
+#define SC2CTR_PB               0x0070  /* parity bit select */
+#define SC2CTR_PB_NONE          0x0000  /* - no parity */
+#define SC2CTR_PB_FIXED0        0x0040  /* - fixed at 0 */
+#define SC2CTR_PB_FIXED1        0x0050  /* - fixed at 1 */
+#define SC2CTR_PB_EVEN          0x0060  /* - even parity */
+#define SC2CTR_PB_ODD           0x0070  /* - odd parity */
+#define SC2CTR_CLN              0x0080  /* character length */
+#define SC2CTR_CLN_7BIT         0x0000  /* - 7 bit chars */
+#define SC2CTR_CLN_8BIT         0x0080  /* - 8 bit chars */
+#define SC2CTR_TWE              0x0100  /* transmit wait enable (enable XCTS control) */
+#define SC2CTR_OD               0x0200  /* bit order select */
+#define SC2CTR_OD_LSBFIRST      0x0000  /* - LSB first */
+#define SC2CTR_OD_MSBFIRST      0x0200  /* - MSB first */
+#define SC2CTR_TWS              0x1000  /* transmit wait select */
+#define SC2CTR_TWS_XCTS_HIGH    0x0000  /* - interrupt TX when XCTS high */
+#define SC2CTR_TWS_XCTS_LOW     0x1000  /* - interrupt TX when XCTS low */
+#define SC2CTR_BKE              0x2000  /* break transmit enable */
+#define SC2CTR_RXE              0x4000  /* receive enable */
+#define SC2CTR_TXE              0x8000  /* transmit enable */
+#define SC2ICR                  __SYSREG(0xd4002024, u8)        /* interrupt control reg */
+#define SC2ICR_TD               0x20    /* transmit DMA trigger cause */
+#define SC2ICR_TI               0x10    /* transmit interrupt cause */
+#define SC2ICR_RES              0x04    /* receive error select */
+#define SC2ICR_RI               0x01    /* receive interrupt cause */
+#define SC2TXB                  __SYSREG(0xd4002018, u8)        /* transmit buffer reg */
+#define SC2RXB                  __SYSREG(0xd4002019, u8)        /* receive buffer reg */
+#define SC2STR                  __SYSREG(0xd400201c, u8)        /* status reg */
+#define SC2STR_OEF              0x0001  /* overrun error found */
+#define SC2STR_PEF              0x0002  /* parity error found */
+#define SC2STR_FEF              0x0004  /* framing error found */
+#define SC2STR_CTS              0x0008  /* XCTS input pin status (0 means high) */
+#define SC2STR_RBF              0x0010  /* receive buffer status */
+#define SC2STR_TBF              0x0020  /* transmit buffer status */
+#define SC2STR_RXF              0x0040  /* receive status */
+#define SC2STR_TXF              0x0080  /* transmit status */
+#define SC2TIM                  __SYSREG(0xd400202d, u8)        /* status reg */
+#define SC2RXIRQ                24      /* serial 2 Receive IRQ */
+#define SC2TXIRQ                25      /* serial 2 Transmit IRQ */
+#define SC2RXICR                GxICR(SC2RXIRQ) /* serial 2 receive intr ctrl reg */
+#define SC2TXICR                GxICR(SC2TXIRQ) /* serial 2 transmit intr ctrl reg */
+#endif /* __KERNEL__ */
+#endif /* _ASM_SERIAL_REGS_H */
diff --git a/arch/mn10300/include/asm/serial.h b/arch/mn10300/include/asm/serial.h
new file mode 100644
index 000000000000..99785a9deadb
--- /dev/null
+++ b/arch/mn10300/include/asm/serial.h
@@ -0,0 +1,36 @@
+/* Standard UART definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+/*
+ * The ASB2305 has an 18.432 MHz clock the UART
+ */
+#define BASE_BAUD       (18432000 / 16)
+/* Standard COM flags (except for COM4, because of the 8514 problem) */
+#ifdef CONFIG_SERIAL_DETECT_IRQ
+#define STD_COM_FLAGS   (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
+#define STD_COM4_FLAGS  (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#else
+#define STD_COM_FLAGS   (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM4_FLAGS  ASYNC_BOOT_AUTOCONF
+#endif
+#ifdef CONFIG_SERIAL_MANY_PORTS
+#define FOURPORT_FLAGS  ASYNC_FOURPORT
+#define ACCENT_FLAGS    0
+#define BOCA_FLAGS      0
+#define HUB6_FLAGS      0
+#define RS_TABLE_SIZE   64
+#else
+#define RS_TABLE_SIZE
+#endif
+#include <asm/unit/serial.h>
diff --git a/arch/mn10300/include/asm/setup.h b/arch/mn10300/include/asm/setup.h
new file mode 100644
index 000000000000..08356c832283
--- /dev/null
+++ b/arch/mn10300/include/asm/setup.h
@@ -0,0 +1,17 @@
+/* MN10300 Setup declarations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SETUP_H
+#define _ASM_SETUP_H
+extern void __init unit_setup(void);
+extern void __init unit_init_IRQ(void);
+#endif /* _ASM_SETUP_H */
diff --git a/arch/mn10300/include/asm/shmbuf.h b/arch/mn10300/include/asm/shmbuf.h
new file mode 100644
index 000000000000..8f300cc35d6c
--- /dev/null
+++ b/arch/mn10300/include/asm/shmbuf.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_SHMBUF_H
+#define _ASM_SHMBUF_H
+/*
+ * The shmid64_ds structure for MN10300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+struct shmid64_ds {
+        struct ipc64_perm       shm_perm;       /* operation perms */
+        size_t                  shm_segsz;      /* size of segment (bytes) */
+        __kernel_time_t         shm_atime;      /* last attach time */
+        unsigned long           __unused1;
+        __kernel_time_t         shm_dtime;      /* last detach time */
+        unsigned long           __unused2;
+        __kernel_time_t         shm_ctime;      /* last change time */
+        unsigned long           __unused3;
+        __kernel_pid_t          shm_cpid;       /* pid of creator */
+        __kernel_pid_t          shm_lpid;       /* pid of last operator */
+        unsigned long           shm_nattch;     /* no. of current attaches */
+        unsigned long           __unused4;
+        unsigned long           __unused5;
+};
+struct shminfo64 {
+        unsigned long   shmmax;
+        unsigned long   shmmin;
+        unsigned long   shmmni;
+        unsigned long   shmseg;
+        unsigned long   shmall;
+        unsigned long   __unused1;
+        unsigned long   __unused2;
+        unsigned long   __unused3;
+        unsigned long   __unused4;
+};
+#endif /* _ASM_SHMBUF_H */
diff --git a/arch/mn10300/include/asm/shmparam.h b/arch/mn10300/include/asm/shmparam.h
new file mode 100644
index 000000000000..ab666ed1a070
--- /dev/null
+++ b/arch/mn10300/include/asm/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SHMPARAM_H
+#define _ASM_SHMPARAM_H
+#define SHMLBA PAGE_SIZE                 /* attach addr a multiple of this */
+#endif /* _ASM_SHMPARAM_H */
diff --git a/arch/mn10300/include/asm/sigcontext.h b/arch/mn10300/include/asm/sigcontext.h
new file mode 100644
index 000000000000..4de3afff4ad7
--- /dev/null
+++ b/arch/mn10300/include/asm/sigcontext.h
@@ -0,0 +1,52 @@
+/* MN10300 Userspace signal context
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SIGCONTEXT_H
+#define _ASM_SIGCONTEXT_H
+struct fpucontext {
+        /* Regular FPU environment */
+        unsigned long   fs[32];         /* fpu registers */
+        unsigned long   fpcr;           /* fpu control register */
+};
+struct sigcontext {
+        unsigned long   d0;
+        unsigned long   d1;
+        unsigned long   d2;
+        unsigned long   d3;
+        unsigned long   a0;
+        unsigned long   a1;
+        unsigned long   a2;
+        unsigned long   a3;
+        unsigned long   e0;
+        unsigned long   e1;
+        unsigned long   e2;
+        unsigned long   e3;
+        unsigned long   e4;
+        unsigned long   e5;
+        unsigned long   e6;
+        unsigned long   e7;
+        unsigned long   lar;
+        unsigned long   lir;
+        unsigned long   mdr;
+        unsigned long   mcvf;
+        unsigned long   mcrl;
+        unsigned long   mcrh;
+        unsigned long   mdrq;
+        unsigned long   sp;
+        unsigned long   epsw;
+        unsigned long   pc;
+        struct fpucontext *fpucontext;
+        unsigned long   oldmask;
+};
+#endif /* _ASM_SIGCONTEXT_H */
diff --git a/arch/mn10300/include/asm/siginfo.h b/arch/mn10300/include/asm/siginfo.h
new file mode 100644
index 000000000000..0815d29d82e5
--- /dev/null
+++ b/arch/mn10300/include/asm/siginfo.h
@@ -0,0 +1 @@
+#include <asm-generic/siginfo.h>
diff --git a/arch/mn10300/include/asm/signal.h b/arch/mn10300/include/asm/signal.h
new file mode 100644
index 000000000000..e98817cec5f7
--- /dev/null
+++ b/arch/mn10300/include/asm/signal.h
@@ -0,0 +1,171 @@
+/* MN10300 Signal definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SIGNAL_H
+#define _ASM_SIGNAL_H
+#include <linux/types.h>
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+#define _NSIG           64
+#define _NSIG_BPW       32
+#define _NSIG_WORDS     (_NSIG / _NSIG_BPW)
+typedef unsigned long old_sigset_t;             /* at least 32 bits */
+typedef struct {
+        unsigned long   sig[_NSIG_WORDS];
+} sigset_t;
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+#define NSIG            32
+typedef unsigned long sigset_t;
+#endif /* __KERNEL__ */
+#define SIGHUP           1
+#define SIGINT           2
+#define SIGQUIT          3
+#define SIGILL           4
+#define SIGTRAP          5
+#define SIGABRT          6
+#define SIGIOT           6
+#define SIGBUS           7
+#define SIGFPE           8
+#define SIGKILL          9
+#define SIGUSR1         10
+#define SIGSEGV         11
+#define SIGUSR2         12
+#define SIGPIPE         13
+#define SIGALRM         14
+#define SIGTERM         15
+#define SIGSTKFLT       16
+#define SIGCHLD         17
+#define SIGCONT         18
+#define SIGSTOP         19
+#define SIGTSTP         20
+#define SIGTTIN         21
+#define SIGTTOU         22
+#define SIGURG          23
+#define SIGXCPU         24
+#define SIGXFSZ         25
+#define SIGVTALRM       26
+#define SIGPROF         27
+#define SIGWINCH        28
+#define SIGIO           29
+#define SIGPOLL         SIGIO
+/*
+#define SIGLOST         29
+*/
+#define SIGPWR          30
+#define SIGSYS          31
+#define SIGUNUSED       31
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN        32
+#define SIGRTMAX        (_NSIG-1)
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP    0x00000001U
+#define SA_NOCLDWAIT    0x00000002U
+#define SA_SIGINFO      0x00000004U
+#define SA_ONSTACK      0x08000000U
+#define SA_RESTART      0x10000000U
+#define SA_NODEFER      0x40000000U
+#define SA_RESETHAND    0x80000000U
+#define SA_NOMASK       SA_NODEFER
+#define SA_ONESHOT      SA_RESETHAND
+#define SA_RESTORER     0x04000000
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK      1
+#define SS_DISABLE      2
+#define MINSIGSTKSZ     2048
+#define SIGSTKSZ        8192
+#include <asm-generic/signal.h>
+#ifdef __KERNEL__
+struct old_sigaction {
+        __sighandler_t sa_handler;
+        old_sigset_t sa_mask;
+        unsigned long sa_flags;
+        __sigrestore_t sa_restorer;
+};
+struct sigaction {
+        __sighandler_t sa_handler;
+        unsigned long sa_flags;
+        __sigrestore_t sa_restorer;
+        sigset_t sa_mask;               /* mask last for extensibility */
+};
+struct k_sigaction {
+        struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+struct sigaction {
+        union {
+          __sighandler_t _sa_handler;
+          void (*_sa_sigaction)(int, struct siginfo *, void *);
+        } _u;
+        sigset_t sa_mask;
+        unsigned long sa_flags;
+        void (*sa_restorer)(void);
+};
+#define sa_handler      _u._sa_handler
+#define sa_sigaction    _u._sa_sigaction
+#endif /* __KERNEL__ */
+typedef struct sigaltstack {
+        void __user     *ss_sp;
+        int             ss_flags;
+        size_t          ss_size;
+} stack_t;
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+struct pt_regs;
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+#endif /* __KERNEL__ */
+#endif /* _ASM_SIGNAL_H */
diff --git a/arch/mn10300/include/asm/smp.h b/arch/mn10300/include/asm/smp.h
new file mode 100644
index 000000000000..4eb8c61b7dab
--- /dev/null
+++ b/arch/mn10300/include/asm/smp.h
@@ -0,0 +1,18 @@
+/* MN10300 SMP support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SMP_H
+#define _ASM_SMP_H
+#ifdef CONFIG_SMP
+#error SMP not yet supported for MN10300
+#endif
+#endif
diff --git a/arch/mn10300/include/asm/socket.h b/arch/mn10300/include/asm/socket.h
new file mode 100644
index 000000000000..fb5daf438ec9
--- /dev/null
+++ b/arch/mn10300/include/asm/socket.h
@@ -0,0 +1,60 @@
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+#include <asm/sockios.h>
+/* For setsockopt(2) */
+#define SOL_SOCKET      1
+#define SO_DEBUG        1
+#define SO_REUSEADDR    2
+#define SO_TYPE         3
+#define SO_ERROR        4
+#define SO_DONTROUTE    5
+#define SO_BROADCAST    6
+#define SO_SNDBUF       7
+#define SO_RCVBUF       8
+#define SO_SNDBUFFORCE  32
+#define SO_RCVBUFFORCE  33
+#define SO_KEEPALIVE    9
+#define SO_OOBINLINE    10
+#define SO_NO_CHECK     11
+#define SO_PRIORITY     12
+#define SO_LINGER       13
+#define SO_BSDCOMPAT    14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED     16
+#define SO_PEERCRED     17
+#define SO_RCVLOWAT     18
+#define SO_SNDLOWAT     19
+#define SO_RCVTIMEO     20
+#define SO_SNDTIMEO     21
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION              22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT        23
+#define SO_SECURITY_ENCRYPTION_NETWORK          24
+#define SO_BINDTODEVICE 25
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+#define SO_PEERNAME             28
+#define SO_TIMESTAMP            29
+#define SCM_TIMESTAMP           SO_TIMESTAMP
+#define SO_ACCEPTCONN           30
+#define SO_PEERSEC              31
+#define SO_PASSSEC              34
+#define SO_TIMESTAMPNS          35
+#define SCM_TIMESTAMPNS         SO_TIMESTAMPNS
+#define SO_MARK                 36
+#define SO_TIMESTAMPING         37
+#define SCM_TIMESTAMPING        SO_TIMESTAMPING
+#endif /* _ASM_SOCKET_H */
diff --git a/arch/mn10300/include/asm/sockios.h b/arch/mn10300/include/asm/sockios.h
new file mode 100644
index 000000000000..b03043a1c564
--- /dev/null
+++ b/arch/mn10300/include/asm/sockios.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_SOCKIOS_H
+#define _ASM_SOCKIOS_H
+/* Socket-level I/O control calls. */
+#define FIOSETOWN       0x8901
+#define SIOCSPGRP       0x8902
+#define FIOGETOWN       0x8903
+#define SIOCGPGRP       0x8904
+#define SIOCATMARK      0x8905
+#define SIOCGSTAMP      0x8906          /* Get stamp */
+#define SIOCGSTAMPNS    0x8907          /* Get stamp (timespec) */
+#endif /* _ASM_SOCKIOS_H */
diff --git a/arch/mn10300/include/asm/spinlock.h b/arch/mn10300/include/asm/spinlock.h
new file mode 100644
index 000000000000..4bf9c8b169e0
--- /dev/null
+++ b/arch/mn10300/include/asm/spinlock.h
@@ -0,0 +1,16 @@
+/* MN10300 spinlock support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SPINLOCK_H
+#define _ASM_SPINLOCK_H
+#error SMP spinlocks not implemented for MN10300
+#endif /* _ASM_SPINLOCK_H */
diff --git a/arch/mn10300/include/asm/stat.h b/arch/mn10300/include/asm/stat.h
new file mode 100644
index 000000000000..63ff8371cf2c
--- /dev/null
+++ b/arch/mn10300/include/asm/stat.h
@@ -0,0 +1,78 @@
+#ifndef _ASM_STAT_H
+#define _ASM_STAT_H
+struct __old_kernel_stat {
+        unsigned short st_dev;
+        unsigned short st_ino;
+        unsigned short st_mode;
+        unsigned short st_nlink;
+        unsigned short st_uid;
+        unsigned short st_gid;
+        unsigned short st_rdev;
+        unsigned long  st_size;
+        unsigned long  st_atime;
+        unsigned long  st_mtime;
+        unsigned long  st_ctime;
+};
+struct stat {
+        unsigned long  st_dev;
+        unsigned long  st_ino;
+        unsigned short st_mode;
+        unsigned short st_nlink;
+        unsigned short st_uid;
+        unsigned short st_gid;
+        unsigned long  st_rdev;
+        unsigned long  st_size;
+        unsigned long  st_blksize;
+        unsigned long  st_blocks;
+        unsigned long  st_atime;
+        unsigned long  st_atime_nsec;
+        unsigned long  st_mtime;
+        unsigned long  st_mtime_nsec;
+        unsigned long  st_ctime;
+        unsigned long  st_ctime_nsec;
+        unsigned long  __unused4;
+        unsigned long  __unused5;
+};
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+        unsigned long long      st_dev;
+        unsigned char   __pad0[4];
+#define STAT64_HAS_BROKEN_ST_INO        1
+        unsigned long   __st_ino;
+        unsigned int    st_mode;
+        unsigned int    st_nlink;
+        unsigned long   st_uid;
+        unsigned long   st_gid;
+        unsigned long long      st_rdev;
+        unsigned char   __pad3[4];
+        long long       st_size;
+        unsigned long   st_blksize;
+        unsigned long   st_blocks;      /* Number 512-byte blocks allocated. */
+        unsigned long   __pad4;         /* future possible st_blocks high bits */
+        unsigned long   st_atime;
+        unsigned long   st_atime_nsec;
+        unsigned long   st_mtime;
+        unsigned int    st_mtime_nsec;
+        unsigned long   st_ctime;
+        unsigned long   st_ctime_nsec;
+        unsigned long long      st_ino;
+};
+#define STAT_HAVE_NSEC 1
+#endif /* _ASM_STAT_H */
diff --git a/arch/mn10300/include/asm/statfs.h b/arch/mn10300/include/asm/statfs.h
new file mode 100644
index 000000000000..0b91fe198c20
--- /dev/null
+++ b/arch/mn10300/include/asm/statfs.h
@@ -0,0 +1 @@
+#include <asm-generic/statfs.h>
diff --git a/arch/mn10300/include/asm/string.h b/arch/mn10300/include/asm/string.h
new file mode 100644
index 000000000000..47dbd4346c32
--- /dev/null
+++ b/arch/mn10300/include/asm/string.h
@@ -0,0 +1,32 @@
+/* MN10300 Optimised string functions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_STRING_H
+#define _ASM_STRING_H
+#define __HAVE_ARCH_MEMSET
+#define __HAVE_ARCH_MEMCPY
+#define __HAVE_ARCH_MEMMOVE
+extern void *memset(void *dest, int ch, size_t count);
+extern void *memcpy(void *dest, const void *src, size_t count);
+extern void *memmove(void *dest, const void *src, size_t count);
+extern void __struct_cpy_bug(void);
+#define struct_cpy(x, y)                        \
+({                                              \
+        if (sizeof(*(x)) != sizeof(*(y)))       \
+                __struct_cpy_bug;               \
+        memcpy(x, y, sizeof(*(x)));             \
+})
+#endif /* _ASM_STRING_H */
diff --git a/arch/mn10300/include/asm/swab.h b/arch/mn10300/include/asm/swab.h
new file mode 100644
index 000000000000..bd818a820ca8
--- /dev/null
+++ b/arch/mn10300/include/asm/swab.h
@@ -0,0 +1,42 @@
+/* MN10300 Byte-order primitive construction
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SWAB_H
+#define _ASM_SWAB_H
+#include <linux/types.h>
+#ifdef __GNUC__
+static inline __attribute__((const))
+__u32 __arch_swab32(__u32 x)
+{
+        __u32 ret;
+        asm("swap %1,%0" : "=r" (ret) : "r" (x));
+        return ret;
+}
+#define __arch_swab32 __arch_swab32
+static inline __attribute__((const))
+__u16 __arch_swab16(__u16 x)
+{
+        __u16 ret;
+        asm("swaph %1,%0" : "=r" (ret) : "r" (x));
+        return ret;
+}
+#define __arch_swab32 __arch_swab32
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __SWAB_64_THRU_32__
+#endif
+#endif /* __GNUC__ */
+#endif /* _ASM_SWAB_H */
diff --git a/arch/mn10300/include/asm/system.h b/arch/mn10300/include/asm/system.h
new file mode 100644
index 000000000000..8214fb7e7fe4
--- /dev/null
+++ b/arch/mn10300/include/asm/system.h
@@ -0,0 +1,237 @@
+/* MN10300 System definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SYSTEM_H
+#define _ASM_SYSTEM_H
+#include <asm/cpu-regs.h>
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#include <linux/kernel.h>
+struct task_struct;
+struct thread_struct;
+extern asmlinkage
+struct task_struct *__switch_to(struct thread_struct *prev,
+                                struct thread_struct *next,
+                                struct task_struct *prev_task);
+/* context switching is now performed out-of-line in switch_to.S */
+#define switch_to(prev, next, last)                                     \
+do {                                                                    \
+        current->thread.wchan = (u_long) __builtin_return_address(0);   \
+        (last) = __switch_to(&(prev)->thread, &(next)->thread, (prev)); \
+        mb();                                                           \
+        current->thread.wchan = 0;                                      \
+} while (0)
+#define arch_align_stack(x) (x)
+#define nop() asm volatile ("nop")
+#endif /* !__ASSEMBLY__ */
+/*
+ * Force strict CPU ordering.
+ * And yes, this is required on UP too when we're talking
+ * to devices.
+ *
+ * For now, "wmb()" doesn't actually do anything, as all
+ * Intel CPU's follow what Intel calls a *Processor Order*,
+ * in which all writes are seen in the program order even
+ * outside the CPU.
+ *
+ * I expect future Intel CPU's to have a weaker ordering,
+ * but I'd also expect them to finally get their act together
+ * and add some real memory barriers if so.
+ *
+ * Some non intel clones support out of order store. wmb() ceases to be a
+ * nop for these.
+ */
+#define mb()    asm volatile ("": : :"memory")
+#define rmb()   mb()
+#define wmb()   asm volatile ("": : :"memory")
+#ifdef CONFIG_SMP
+#define smp_mb()        mb()
+#define smp_rmb()       rmb()
+#define smp_wmb()       wmb()
+#else
+#define smp_mb()        barrier()
+#define smp_rmb()       barrier()
+#define smp_wmb()       barrier()
+#endif
+#define set_mb(var, value)  do { var = value;  mb(); } while (0)
+#define set_wmb(var, value) do { var = value; wmb(); } while (0)
+#define read_barrier_depends()          do {} while (0)
+#define smp_read_barrier_depends()      do {} while (0)
+/*****************************************************************************/
+/*
+ * interrupt control
+ * - "disabled": run in IM1/2
+ *   - level 0 - GDB stub
+ *   - level 1 - virtual serial DMA (if present)
+ *   - level 5 - normal interrupt priority
+ *   - level 6 - timer interrupt
+ * - "enabled":  run in IM7
+ */
+#ifdef CONFIG_MN10300_TTYSM
+#define MN10300_CLI_LEVEL       EPSW_IM_2
+#else
+#define MN10300_CLI_LEVEL       EPSW_IM_1
+#endif
+#define local_save_flags(x)                     \
+do {                                            \
+        typecheck(unsigned long, x);            \
+        asm volatile(                           \
+                "       mov epsw,%0     \n"     \
+                : "=d"(x)                       \
+                );                              \
+} while (0)
+#define local_irq_disable()                                             \
+do {                                                                    \
+        asm volatile(                                                   \
+                "       and %0,epsw     \n"                             \
+                "       or %1,epsw      \n"                             \
+                "       nop             \n"                             \
+                "       nop             \n"                             \
+                "       nop             \n"                             \
+                :                                                       \
+                : "i"(~EPSW_IM), "i"(EPSW_IE | MN10300_CLI_LEVEL)       \
+                );                                                      \
+} while (0)
+#define local_irq_save(x)                       \
+do {                                            \
+        local_save_flags(x);                    \
+        local_irq_disable();                    \
+} while (0)
+/*
+ * we make sure local_irq_enable() doesn't cause priority inversion
+ */
+#ifndef __ASSEMBLY__
+extern unsigned long __mn10300_irq_enabled_epsw;
+#endif
+#define local_irq_enable()                                              \
+do {                                                                    \
+        unsigned long tmp;                                              \
+                                                                        \
+        asm volatile(                                                   \
+                "       mov     epsw,%0         \n"                     \
+                "       and     %1,%0           \n"                     \
+                "       or      %2,%0           \n"                     \
+                "       mov     %0,epsw         \n"                     \
+                : "=&d"(tmp)                                            \
+                : "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw)        \
+                );                                                      \
+} while (0)
+#define local_irq_restore(x)                    \
+do {                                            \
+        typecheck(unsigned long, x);            \
+        asm volatile(                           \
+                "       mov %0,epsw     \n"     \
+                "       nop             \n"     \
+                "       nop             \n"     \
+                "       nop             \n"     \
+                :                               \
+                : "d"(x)                        \
+                : "memory", "cc"                \
+                );                              \
+} while (0)
+#define irqs_disabled()                         \
+({                                              \
+        unsigned long flags;                    \
+        local_save_flags(flags);                \
+        (flags & EPSW_IM) <= MN10300_CLI_LEVEL; \
+})
+/* hook to save power by halting the CPU
+ * - called from the idle loop
+ * - must reenable interrupts (which takes three instruction cycles to complete)
+ */
+#define safe_halt()                                                     \
+do {                                                                    \
+        asm volatile("  or      %0,epsw \n"                             \
+                     "  nop             \n"                             \
+                     "  nop             \n"                             \
+                     "  bset    %2,(%1) \n"                             \
+                     :                                                  \
+                     : "i"(EPSW_IE|EPSW_IM), "n"(&CPUM), "i"(CPUM_SLEEP)\
+                     : "cc"                                             \
+                     );                                                 \
+} while (0)
+#define STI     or EPSW_IE|EPSW_IM,epsw
+#define CLI     and ~EPSW_IM,epsw; or EPSW_IE|MN10300_CLI_LEVEL,epsw; nop; nop; nop
+/*****************************************************************************/
+/*
+ * MN10300 doesn't actually have an exchange instruction
+ */
+#ifndef __ASSEMBLY__
+struct __xchg_dummy { unsigned long a[100]; };
+#define __xg(x) ((struct __xchg_dummy *)(x))
+static inline
+unsigned long __xchg(volatile unsigned long *m, unsigned long val)
+{
+        unsigned long retval;
+        unsigned long flags;
+        local_irq_save(flags);
+        retval = *m;
+        *m = val;
+        local_irq_restore(flags);
+        return retval;
+}
+#define xchg(ptr, v)                                            \
+        ((__typeof__(*(ptr))) __xchg((unsigned long *)(ptr),    \
+                                     (unsigned long)(v)))
+static inline unsigned long __cmpxchg(volatile unsigned long *m,
+                                      unsigned long old, unsigned long new)
+{
+        unsigned long retval;
+        unsigned long flags;
+        local_irq_save(flags);
+        retval = *m;
+        if (retval == old)
+                *m = new;
+        local_irq_restore(flags);
+        return retval;
+}
+#define cmpxchg(ptr, o, n)                                      \
+        ((__typeof__(*(ptr))) __cmpxchg((unsigned long *)(ptr), \
+                                        (unsigned long)(o),     \
+                                        (unsigned long)(n)))
+#endif /* !__ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_SYSTEM_H */
diff --git a/arch/mn10300/include/asm/termbits.h b/arch/mn10300/include/asm/termbits.h
new file mode 100644
index 000000000000..eb2b0dc1f696
--- /dev/null
+++ b/arch/mn10300/include/asm/termbits.h
@@ -0,0 +1,200 @@
+#ifndef _ASM_TERMBITS_H
+#define _ASM_TERMBITS_H
+#include <linux/posix_types.h>
+typedef unsigned char   cc_t;
+typedef unsigned int    speed_t;
+typedef unsigned int    tcflag_t;
+#define NCCS 19
+struct termios {
+        tcflag_t c_iflag;               /* input mode flags */
+        tcflag_t c_oflag;               /* output mode flags */
+        tcflag_t c_cflag;               /* control mode flags */
+        tcflag_t c_lflag;               /* local mode flags */
+        cc_t c_line;                    /* line discipline */
+        cc_t c_cc[NCCS];                /* control characters */
+};
+struct termios2 {
+        tcflag_t c_iflag;               /* input mode flags */
+        tcflag_t c_oflag;               /* output mode flags */
+        tcflag_t c_cflag;               /* control mode flags */
+        tcflag_t c_lflag;               /* local mode flags */
+        cc_t c_line;                    /* line discipline */
+        cc_t c_cc[NCCS];                /* control characters */
+        speed_t c_ispeed;               /* input speed */
+        speed_t c_ospeed;               /* output speed */
+};
+struct ktermios {
+        tcflag_t c_iflag;               /* input mode flags */
+        tcflag_t c_oflag;               /* output mode flags */
+        tcflag_t c_cflag;               /* control mode flags */
+        tcflag_t c_lflag;               /* local mode flags */
+        cc_t c_line;                    /* line discipline */
+        cc_t c_cc[NCCS];                /* control characters */
+        speed_t c_ispeed;               /* input speed */
+        speed_t c_ospeed;               /* output speed */
+};
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+/* c_iflag bits */
+#define IGNBRK  0000001
+#define BRKINT  0000002
+#define IGNPAR  0000004
+#define PARMRK  0000010
+#define INPCK   0000020
+#define ISTRIP  0000040
+#define INLCR   0000100
+#define IGNCR   0000200
+#define ICRNL   0000400
+#define IUCLC   0001000
+#define IXON    0002000
+#define IXANY   0004000
+#define IXOFF   0010000
+#define IMAXBEL 0020000
+#define IUTF8   0040000
+/* c_oflag bits */
+#define OPOST   0000001
+#define OLCUC   0000002
+#define ONLCR   0000004
+#define OCRNL   0000010
+#define ONOCR   0000020
+#define ONLRET  0000040
+#define OFILL   0000100
+#define OFDEL   0000200
+#define NLDLY   0000400
+#define   NL0   0000000
+#define   NL1   0000400
+#define CRDLY   0003000
+#define   CR0   0000000
+#define   CR1   0001000
+#define   CR2   0002000
+#define   CR3   0003000
+#define TABDLY  0014000
+#define   TAB0  0000000
+#define   TAB1  0004000
+#define   TAB2  0010000
+#define   TAB3  0014000
+#define   XTABS 0014000
+#define BSDLY   0020000
+#define   BS0   0000000
+#define   BS1   0020000
+#define VTDLY   0040000
+#define   VT0   0000000
+#define   VT1   0040000
+#define FFDLY   0100000
+#define   FF0   0000000
+#define   FF1   0100000
+/* c_cflag bit meaning */
+#define CBAUD   0010017
+#define  B0     0000000         /* hang up */
+#define  B50    0000001
+#define  B75    0000002
+#define  B110   0000003
+#define  B134   0000004
+#define  B150   0000005
+#define  B200   0000006
+#define  B300   0000007
+#define  B600   0000010
+#define  B1200  0000011
+#define  B1800  0000012
+#define  B2400  0000013
+#define  B4800  0000014
+#define  B9600  0000015
+#define  B19200 0000016
+#define  B38400 0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE   0000060
+#define   CS5   0000000
+#define   CS6   0000020
+#define   CS7   0000040
+#define   CS8   0000060
+#define CSTOPB  0000100
+#define CREAD   0000200
+#define PARENB  0000400
+#define PARODD  0001000
+#define HUPCL   0002000
+#define CLOCAL  0004000
+#define CBAUDEX 0010000
+#define   BOTHER  0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD    002003600000  /* input baud rate (not used) */
+#define CTVB      004000000000          /* VisioBraille Terminal flow control */
+#define CMSPAR    010000000000          /* mark or space (stick) parity */
+#define CRTSCTS   020000000000          /* flow control */
+#define IBSHIFT   16            /* Shift from CBAUD to CIBAUD */
+/* c_lflag bits */
+#define ISIG    0000001
+#define ICANON  0000002
+#define XCASE   0000004
+#define ECHO    0000010
+#define ECHOE   0000020
+#define ECHOK   0000040
+#define ECHONL  0000100
+#define NOFLSH  0000200
+#define TOSTOP  0000400
+#define ECHOCTL 0001000
+#define ECHOPRT 0002000
+#define ECHOKE  0004000
+#define FLUSHO  0010000
+#define PENDIN  0040000
+#define IEXTEN  0100000
+/* tcflow() and TCXONC use these */
+#define TCOOFF          0
+#define TCOON           1
+#define TCIOFF          2
+#define TCION           3
+/* tcflush() and TCFLSH use these */
+#define TCIFLUSH        0
+#define TCOFLUSH        1
+#define TCIOFLUSH       2
+/* tcsetattr uses these */
+#define TCSANOW         0
+#define TCSADRAIN       1
+#define TCSAFLUSH       2
+#endif /* _ASM_TERMBITS_H */
diff --git a/arch/mn10300/include/asm/termios.h b/arch/mn10300/include/asm/termios.h
new file mode 100644
index 000000000000..dd7cf617e118
--- /dev/null
+++ b/arch/mn10300/include/asm/termios.h
@@ -0,0 +1,92 @@
+#ifndef _ASM_TERMIOS_H
+#define _ASM_TERMIOS_H
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+struct winsize {
+        unsigned short ws_row;
+        unsigned short ws_col;
+        unsigned short ws_xpixel;
+        unsigned short ws_ypixel;
+};
+#define NCC 8
+struct termio {
+        unsigned short c_iflag;         /* input mode flags */
+        unsigned short c_oflag;         /* output mode flags */
+        unsigned short c_cflag;         /* control mode flags */
+        unsigned short c_lflag;         /* local mode flags */
+        unsigned char c_line;           /* line discipline */
+        unsigned char c_cc[NCC];        /* control characters */
+};
+#ifdef __KERNEL__
+/*      intr=^C         quit=^|         erase=del       kill=^U
+        eof=^D          vtime=\0        vmin=\1         sxtc=\0
+        start=^Q        stop=^S         susp=^Z         eol=\0
+        reprint=^R      discard=^U      werase=^W       lnext=^V
+        eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+#endif
+/* modem lines */
+#define TIOCM_LE        0x001
+#define TIOCM_DTR       0x002
+#define TIOCM_RTS       0x004
+#define TIOCM_ST        0x008
+#define TIOCM_SR        0x010
+#define TIOCM_CTS       0x020
+#define TIOCM_CAR       0x040
+#define TIOCM_RNG       0x080
+#define TIOCM_DSR       0x100
+#define TIOCM_CD        TIOCM_CAR
+#define TIOCM_RI        TIOCM_RNG
+#define TIOCM_OUT1      0x2000
+#define TIOCM_OUT2      0x4000
+#define TIOCM_LOOP      0x8000
+#define TIOCM_MODEM_BITS       TIOCM_OUT2      /* IRDA support */
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+        unsigned short __tmp; \
+        get_user(__tmp, &(termio)->x); \
+        *(unsigned short *) &(termios)->x = __tmp; \
+}
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+        SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+        SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+        SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+        SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+        copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+        put_user((termios)->c_iflag, &(termio)->c_iflag); \
+        put_user((termios)->c_oflag, &(termio)->c_oflag); \
+        put_user((termios)->c_cflag, &(termio)->c_cflag); \
+        put_user((termios)->c_lflag, &(termio)->c_lflag); \
+        put_user((termios)->c_line,  &(termio)->c_line); \
+        copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+#define user_termios_to_kernel_termios(k, u) \
+        copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) \
+        copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) \
+        copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) \
+        copy_to_user(u, k, sizeof(struct termios))
+#endif  /* _ASM_TERMIOS_H */
diff --git a/arch/mn10300/include/asm/thread_info.h b/arch/mn10300/include/asm/thread_info.h
new file mode 100644
index 000000000000..78a3881f3c12
--- /dev/null
+++ b/arch/mn10300/include/asm/thread_info.h
@@ -0,0 +1,170 @@
+/* MN10300 Low-level thread information
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+#ifdef __KERNEL__
+#include <asm/page.h>
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#endif
+#define PREEMPT_ACTIVE          0x10000000
+#ifdef CONFIG_4KSTACKS
+#define THREAD_SIZE             (4096)
+#else
+#define THREAD_SIZE             (8192)
+#endif
+#define STACK_WARN              (THREAD_SIZE / 8)
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants
+ *   must also be changed
+ */
+#ifndef __ASSEMBLY__
+struct thread_info {
+        struct task_struct      *task;          /* main task structure */
+        struct exec_domain      *exec_domain;   /* execution domain */
+        unsigned long           flags;          /* low level flags */
+        __u32                   cpu;            /* current CPU */
+        __s32                   preempt_count;  /* 0 => preemptable, <0 => BUG */
+        mm_segment_t            addr_limit;     /* thread address space:
+                                                   0-0xBFFFFFFF for user-thead
+                                                   0-0xFFFFFFFF for kernel-thread
+                                                */
+        struct restart_block    restart_block;
+        __u8                    supervisor_stack[0];
+};
+#else /* !__ASSEMBLY__ */
+#ifndef __ASM_OFFSETS_H__
+#include <asm/asm-offsets.h>
+#endif
+#endif
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#ifndef __ASSEMBLY__
+#define INIT_THREAD_INFO(tsk)                   \
+{                                               \
+        .task           = &tsk,                 \
+        .exec_domain    = &default_exec_domain, \
+        .flags          = 0,                    \
+        .cpu            = 0,                    \
+        .preempt_count  = 1,                    \
+        .addr_limit     = KERNEL_DS,            \
+        .restart_block = {                      \
+                .fn = do_no_restart_syscall,    \
+        },                                      \
+}
+#define init_thread_info        (init_thread_union.thread_info)
+#define init_stack              (init_thread_union.stack)
+#define init_uregs                                                      \
+        ((struct pt_regs *)                                             \
+         ((unsigned long) init_stack + THREAD_SIZE - sizeof(struct pt_regs)))
+extern struct thread_info *__current_ti;
+/* how to get the thread information struct from C */
+static inline __attribute__((const))
+struct thread_info *current_thread_info(void)
+{
+        struct thread_info *ti;
+        asm("mov sp,%0\n"
+            "and %1,%0\n"
+            : "=d" (ti)
+            : "i" (~(THREAD_SIZE - 1))
+            : "cc");
+        return ti;
+}
+/* how to get the current stack pointer from C */
+static inline unsigned long current_stack_pointer(void)
+{
+        unsigned long sp;
+        asm("mov sp,%0; ":"=r" (sp));
+        return sp;
+}
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+/* thread information allocation */
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define alloc_thread_info(tsk) kzalloc(THREAD_SIZE, GFP_KERNEL)
+#else
+#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL)
+#endif
+#define free_thread_info(ti)    kfree((ti))
+#define get_thread_info(ti)     get_task_struct((ti)->task)
+#define put_thread_info(ti)     put_task_struct((ti)->task)
+#else /* !__ASSEMBLY__ */
+#ifndef __VMLINUX_LDS__
+/* how to get the thread information struct from ASM */
+.macro GET_THREAD_INFO reg
+        mov     sp,\reg
+        and     -THREAD_SIZE,\reg
+.endm
+#endif
+#endif
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to
+ *   access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE       0       /* syscall trace active */
+#define TIF_NOTIFY_RESUME       1       /* resumption notification requested */
+#define TIF_SIGPENDING          2       /* signal pending */
+#define TIF_NEED_RESCHED        3       /* rescheduling necessary */
+#define TIF_SINGLESTEP          4       /* restore singlestep on return to user mode */
+#define TIF_RESTORE_SIGMASK     5       /* restore signal mask in do_signal() */
+#define TIF_POLLING_NRFLAG      16      /* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE              17      /* OOM killer killed process */
+#define TIF_FREEZE              18      /* freezing for suspend */
+#define _TIF_SYSCALL_TRACE      +(1 << TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME      +(1 << TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING         +(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED       +(1 << TIF_NEED_RESCHED)
+#define _TIF_SINGLESTEP         +(1 << TIF_SINGLESTEP)
+#define _TIF_RESTORE_SIGMASK    +(1 << TIF_RESTORE_SIGMASK)
+#define _TIF_POLLING_NRFLAG     +(1 << TIF_POLLING_NRFLAG)
+#define _TIF_FREEZE             +(1 << TIF_FREEZE)
+#define _TIF_WORK_MASK          0x0000FFFE      /* work to do on interrupt/exception return */
+#define _TIF_ALLWORK_MASK       0x0000FFFF      /* work to do on any return to u-space */
+#endif /* __KERNEL__ */
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/mn10300/include/asm/timer-regs.h b/arch/mn10300/include/asm/timer-regs.h
new file mode 100644
index 000000000000..1d883b7f94ab
--- /dev/null
+++ b/arch/mn10300/include/asm/timer-regs.h
@@ -0,0 +1,293 @@
+/* AM33v2 on-board timer module registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_TIMER_REGS_H
+#define _ASM_TIMER_REGS_H
+#include <asm/cpu-regs.h>
+#include <asm/intctl-regs.h>
+#ifdef __KERNEL__
+/* timer prescalar control */
+#define TMPSCNT                 __SYSREG(0xd4003071, u8) /* timer prescaler control */
+#define TMPSCNT_ENABLE          0x80    /* timer prescaler enable */
+#define TMPSCNT_DISABLE         0x00    /* timer prescaler disable */
+/* 8 bit timers */
+#define TM0MD                   __SYSREG(0xd4003000, u8) /* timer 0 mode register */
+#define TM0MD_SRC               0x07    /* timer source */
+#define TM0MD_SRC_IOCLK         0x00    /* - IOCLK */
+#define TM0MD_SRC_IOCLK_8       0x01    /* - 1/8 IOCLK */
+#define TM0MD_SRC_IOCLK_32      0x02    /* - 1/32 IOCLK */
+#define TM0MD_SRC_TM2IO         0x03    /* - TM2IO pin input */
+#define TM0MD_SRC_TM1UFLOW      0x05    /* - timer 1 underflow */
+#define TM0MD_SRC_TM2UFLOW      0x06    /* - timer 2 underflow */
+#define TM0MD_SRC_TM0IO         0x07    /* - TM0IO pin input */
+#define TM0MD_INIT_COUNTER      0x40    /* initialize TMnBC = TMnBR */
+#define TM0MD_COUNT_ENABLE      0x80    /* timer count enable */
+#define TM1MD                   __SYSREG(0xd4003001, u8) /* timer 1 mode register */
+#define TM1MD_SRC               0x07    /* timer source */
+#define TM1MD_SRC_IOCLK         0x00    /* - IOCLK */
+#define TM1MD_SRC_IOCLK_8       0x01    /* - 1/8 IOCLK */
+#define TM1MD_SRC_IOCLK_32      0x02    /* - 1/32 IOCLK */
+#define TM1MD_SRC_TM0CASCADE    0x03    /* - cascade with timer 0 */
+#define TM1MD_SRC_TM0UFLOW      0x04    /* - timer 0 underflow */
+#define TM1MD_SRC_TM2UFLOW      0x06    /* - timer 2 underflow */
+#define TM1MD_SRC_TM1IO         0x07    /* - TM1IO pin input */
+#define TM1MD_INIT_COUNTER      0x40    /* initialize TMnBC = TMnBR */
+#define TM1MD_COUNT_ENABLE      0x80    /* timer count enable */
+#define TM2MD                   __SYSREG(0xd4003002, u8) /* timer 2 mode register */
+#define TM2MD_SRC               0x07    /* timer source */
+#define TM2MD_SRC_IOCLK         0x00    /* - IOCLK */
+#define TM2MD_SRC_IOCLK_8       0x01    /* - 1/8 IOCLK */
+#define TM2MD_SRC_IOCLK_32      0x02    /* - 1/32 IOCLK */
+#define TM2MD_SRC_TM1CASCADE    0x03    /* - cascade with timer 1 */
+#define TM2MD_SRC_TM0UFLOW      0x04    /* - timer 0 underflow */
+#define TM2MD_SRC_TM1UFLOW      0x05    /* - timer 1 underflow */
+#define TM2MD_SRC_TM2IO         0x07    /* - TM2IO pin input */
+#define TM2MD_INIT_COUNTER      0x40    /* initialize TMnBC = TMnBR */
+#define TM2MD_COUNT_ENABLE      0x80    /* timer count enable */
+#define TM3MD                   __SYSREG(0xd4003003, u8) /* timer 3 mode register */
+#define TM3MD_SRC               0x07    /* timer source */
+#define TM3MD_SRC_IOCLK         0x00    /* - IOCLK */
+#define TM3MD_SRC_IOCLK_8       0x01    /* - 1/8 IOCLK */
+#define TM3MD_SRC_IOCLK_32      0x02    /* - 1/32 IOCLK */
+#define TM3MD_SRC_TM1CASCADE    0x03    /* - cascade with timer 2 */
+#define TM3MD_SRC_TM0UFLOW      0x04    /* - timer 0 underflow */
+#define TM3MD_SRC_TM1UFLOW      0x05    /* - timer 1 underflow */
+#define TM3MD_SRC_TM2UFLOW      0x06    /* - timer 2 underflow */
+#define TM3MD_SRC_TM3IO         0x07    /* - TM3IO pin input */
+#define TM3MD_INIT_COUNTER      0x40    /* initialize TMnBC = TMnBR */
+#define TM3MD_COUNT_ENABLE      0x80    /* timer count enable */
+#define TM01MD                  __SYSREG(0xd4003000, u16)  /* timer 0:1 mode register */
+#define TM0BR                   __SYSREG(0xd4003010, u8)   /* timer 0 base register */
+#define TM1BR                   __SYSREG(0xd4003011, u8)   /* timer 1 base register */
+#define TM2BR                   __SYSREG(0xd4003012, u8)   /* timer 2 base register */
+#define TM3BR                   __SYSREG(0xd4003013, u8)   /* timer 3 base register */
+#define TM01BR                  __SYSREG(0xd4003010, u16)  /* timer 0:1 base register */
+#define TM0BC                   __SYSREGC(0xd4003020, u8)  /* timer 0 binary counter */
+#define TM1BC                   __SYSREGC(0xd4003021, u8)  /* timer 1 binary counter */
+#define TM2BC                   __SYSREGC(0xd4003022, u8)  /* timer 2 binary counter */
+#define TM3BC                   __SYSREGC(0xd4003023, u8)  /* timer 3 binary counter */
+#define TM01BC                  __SYSREGC(0xd4003020, u16) /* timer 0:1 binary counter */
+#define TM0IRQ                  2       /* timer 0 IRQ */
+#define TM1IRQ                  3       /* timer 1 IRQ */
+#define TM2IRQ                  4       /* timer 2 IRQ */
+#define TM3IRQ                  5       /* timer 3 IRQ */
+#define TM0ICR                  GxICR(TM0IRQ)   /* timer 0 uflow intr ctrl reg */
+#define TM1ICR                  GxICR(TM1IRQ)   /* timer 1 uflow intr ctrl reg */
+#define TM2ICR                  GxICR(TM2IRQ)   /* timer 2 uflow intr ctrl reg */
+#define TM3ICR                  GxICR(TM3IRQ)   /* timer 3 uflow intr ctrl reg */
+/* 16-bit timers 4,5 & 7-11 */
+#define TM4MD                   __SYSREG(0xd4003080, u8)   /* timer 4 mode register */
+#define TM4MD_SRC               0x07    /* timer source */
+#define TM4MD_SRC_IOCLK         0x00    /* - IOCLK */
+#define TM4MD_SRC_IOCLK_8       0x01    /* - 1/8 IOCLK */
+#define TM4MD_SRC_IOCLK_32      0x02    /* - 1/32 IOCLK */
+#define TM4MD_SRC_TM0UFLOW      0x04    /* - timer 0 underflow */
+#define TM4MD_SRC_TM1UFLOW      0x05    /* - timer 1 underflow */
+#define TM4MD_SRC_TM2UFLOW      0x06    /* - timer 2 underflow */
+#define TM4MD_SRC_TM4IO         0x07    /* - TM4IO pin input */
+#define TM4MD_INIT_COUNTER      0x40    /* initialize TMnBC = TMnBR */
+#define TM4MD_COUNT_ENABLE      0x80    /* timer count enable */
+#define TM5MD                   __SYSREG(0xd4003082, u8)   /* timer 5 mode register */
+#define TM5MD_SRC               0x07    /* timer source */
+#define TM5MD_SRC_IOCLK         0x00    /* - IOCLK */
+#define TM5MD_SRC_IOCLK_8       0x01    /* - 1/8 IOCLK */
+#define TM5MD_SRC_IOCLK_32      0x02    /* - 1/32 IOCLK */
+#define TM5MD_SRC_TM4CASCADE    0x03    /* - cascade with timer 4 */
+#define TM5MD_SRC_TM0UFLOW      0x04    /* - timer 0 underflow */
+#define TM5MD_SRC_TM1UFLOW      0x05    /* - timer 1 underflow */
+#define TM5MD_SRC_TM2UFLOW      0x06    /* - timer 2 underflow */
+#define TM5MD_SRC_TM5IO         0x07    /* - TM5IO pin input */
+#define TM5MD_INIT_COUNTER      0x40    /* initialize TMnBC = TMnBR */
+#define TM5MD_COUNT_ENABLE      0x80    /* timer count enable */
+#define TM7MD                   __SYSREG(0xd4003086, u8)   /* timer 7 mode register */
+#define TM7MD_SRC               0x07    /* timer source */
+#define TM7MD_SRC_IOCLK         0x00    /* - IOCLK */
+#define TM7MD_SRC_IOCLK_8       0x01    /* - 1/8 IOCLK */
+#define TM7MD_SRC_IOCLK_32      0x02    /* - 1/32 IOCLK */
+#define TM7MD_SRC_TM0UFLOW      0x04    /* - timer 0 underflow */
+#define TM7MD_SRC_TM1UFLOW      0x05    /* - timer 1 underflow */
+#define TM7MD_SRC_TM2UFLOW      0x06    /* - timer 2 underflow */
+#define TM7MD_SRC_TM7IO         0x07    /* - TM7IO pin input */
+#define TM7MD_INIT_COUNTER      0x40    /* initialize TMnBC = TMnBR */
+#define TM7MD_COUNT_ENABLE      0x80    /* timer count enable */
+#define TM8MD                   __SYSREG(0xd4003088, u8)   /* timer 8 mode register */
+#define TM8MD_SRC               0x07    /* timer source */
+#define TM8MD_SRC_IOCLK         0x00    /* - IOCLK */
+#define TM8MD_SRC_IOCLK_8       0x01    /* - 1/8 IOCLK */
+#define TM8MD_SRC_IOCLK_32      0x02    /* - 1/32 IOCLK */
+#define TM8MD_SRC_TM7CASCADE    0x03    /* - cascade with timer 7 */
+#define TM8MD_SRC_TM0UFLOW      0x04    /* - timer 0 underflow */
+#define TM8MD_SRC_TM1UFLOW      0x05    /* - timer 1 underflow */
+#define TM8MD_SRC_TM2UFLOW      0x06    /* - timer 2 underflow */
+#define TM8MD_SRC_TM8IO         0x07    /* - TM8IO pin input */
+#define TM8MD_INIT_COUNTER      0x40    /* initialize TMnBC = TMnBR */
+#define TM8MD_COUNT_ENABLE      0x80    /* timer count enable */
+#define TM9MD                   __SYSREG(0xd400308a, u8)   /* timer 9 mode register */
+#define TM9MD_SRC               0x07    /* timer source */
+#define TM9MD_SRC_IOCLK         0x00    /* - IOCLK */
+#define TM9MD_SRC_IOCLK_8       0x01    /* - 1/8 IOCLK */
+#define TM9MD_SRC_IOCLK_32      0x02    /* - 1/32 IOCLK */
+#define TM9MD_SRC_TM8CASCADE    0x03    /* - cascade with timer 8 */
+#define TM9MD_SRC_TM0UFLOW      0x04    /* - timer 0 underflow */
+#define TM9MD_SRC_TM1UFLOW      0x05    /* - timer 1 underflow */
+#define TM9MD_SRC_TM2UFLOW      0x06    /* - timer 2 underflow */
+#define TM9MD_SRC_TM9IO         0x07    /* - TM9IO pin input */
+#define TM9MD_INIT_COUNTER      0x40    /* initialize TMnBC = TMnBR */
+#define TM9MD_COUNT_ENABLE      0x80    /* timer count enable */
+#define TM10MD                  __SYSREG(0xd400308c, u8)   /* timer 10 mode register */
+#define TM10MD_SRC              0x07    /* timer source */
+#define TM10MD_SRC_IOCLK        0x00    /* - IOCLK */
+#define TM10MD_SRC_IOCLK_8      0x01    /* - 1/8 IOCLK */
+#define TM10MD_SRC_IOCLK_32     0x02    /* - 1/32 IOCLK */
+#define TM10MD_SRC_TM9CASCADE   0x03    /* - cascade with timer 9 */
+#define TM10MD_SRC_TM0UFLOW     0x04    /* - timer 0 underflow */
+#define TM10MD_SRC_TM1UFLOW     0x05    /* - timer 1 underflow */
+#define TM10MD_SRC_TM2UFLOW     0x06    /* - timer 2 underflow */
+#define TM10MD_SRC_TM10IO       0x07    /* - TM10IO pin input */
+#define TM10MD_INIT_COUNTER     0x40    /* initialize TMnBC = TMnBR */
+#define TM10MD_COUNT_ENABLE     0x80    /* timer count enable */
+#define TM11MD                  __SYSREG(0xd400308e, u8)   /* timer 11 mode register */
+#define TM11MD_SRC              0x07    /* timer source */
+#define TM11MD_SRC_IOCLK        0x00    /* - IOCLK */
+#define TM11MD_SRC_IOCLK_8      0x01    /* - 1/8 IOCLK */
+#define TM11MD_SRC_IOCLK_32     0x02    /* - 1/32 IOCLK */
+#define TM11MD_SRC_TM7CASCADE   0x03    /* - cascade with timer 7 */
+#define TM11MD_SRC_TM0UFLOW     0x04    /* - timer 0 underflow */
+#define TM11MD_SRC_TM1UFLOW     0x05    /* - timer 1 underflow */
+#define TM11MD_SRC_TM2UFLOW     0x06    /* - timer 2 underflow */
+#define TM11MD_SRC_TM11IO       0x07    /* - TM11IO pin input */
+#define TM11MD_INIT_COUNTER     0x40    /* initialize TMnBC = TMnBR */
+#define TM11MD_COUNT_ENABLE     0x80    /* timer count enable */
+#define TM4BR                   __SYSREG(0xd4003090, u16)  /* timer 4 base register */
+#define TM5BR                   __SYSREG(0xd4003092, u16)  /* timer 5 base register */
+#define TM7BR                   __SYSREG(0xd4003096, u16)  /* timer 7 base register */
+#define TM8BR                   __SYSREG(0xd4003098, u16)  /* timer 8 base register */
+#define TM9BR                   __SYSREG(0xd400309a, u16)  /* timer 9 base register */
+#define TM10BR                  __SYSREG(0xd400309c, u16)  /* timer 10 base register */
+#define TM11BR                  __SYSREG(0xd400309e, u16)  /* timer 11 base register */
+#define TM45BR                  __SYSREG(0xd4003090, u32)  /* timer 4:5 base register */
+#define TM4BC                   __SYSREG(0xd40030a0, u16)  /* timer 4 binary counter */
+#define TM5BC                   __SYSREG(0xd40030a2, u16)  /* timer 5 binary counter */
+#define TM45BC                  __SYSREG(0xd40030a0, u32)  /* timer 4:5 binary counter */
+#define TM7BC                   __SYSREG(0xd40030a6, u16)  /* timer 7 binary counter */
+#define TM8BC                   __SYSREG(0xd40030a8, u16)  /* timer 8 binary counter */
+#define TM9BC                   __SYSREG(0xd40030aa, u16)  /* timer 9 binary counter */
+#define TM10BC                  __SYSREG(0xd40030ac, u16)  /* timer 10 binary counter */
+#define TM11BC                  __SYSREG(0xd40030ae, u16)  /* timer 11 binary counter */
+#define TM4IRQ                  6       /* timer 4 IRQ */
+#define TM5IRQ                  7       /* timer 5 IRQ */
+#define TM7IRQ                  11      /* timer 7 IRQ */
+#define TM8IRQ                  12      /* timer 8 IRQ */
+#define TM9IRQ                  13      /* timer 9 IRQ */
+#define TM10IRQ                 14      /* timer 10 IRQ */
+#define TM11IRQ                 15      /* timer 11 IRQ */
+#define TM4ICR                  GxICR(TM4IRQ)   /* timer 4 uflow intr ctrl reg */
+#define TM5ICR                  GxICR(TM5IRQ)   /* timer 5 uflow intr ctrl reg */
+#define TM7ICR                  GxICR(TM7IRQ)   /* timer 7 uflow intr ctrl reg */
+#define TM8ICR                  GxICR(TM8IRQ)   /* timer 8 uflow intr ctrl reg */
+#define TM9ICR                  GxICR(TM9IRQ)   /* timer 9 uflow intr ctrl reg */
+#define TM10ICR                 GxICR(TM10IRQ)  /* timer 10 uflow intr ctrl reg */
+#define TM11ICR                 GxICR(TM11IRQ)  /* timer 11 uflow intr ctrl reg */
+/* 16-bit timer 6 */
+#define TM6MD                   __SYSREG(0xd4003084, u16)  /* timer6 mode register */
+#define TM6MD_SRC               0x0007  /* timer source */
+#define TM6MD_SRC_IOCLK         0x0000  /* - IOCLK */
+#define TM6MD_SRC_IOCLK_8       0x0001  /* - 1/8 IOCLK */
+#define TM6MD_SRC_IOCLK_32      0x0002  /* - 1/32 IOCLK */
+#define TM6MD_SRC_TM0UFLOW      0x0004  /* - timer 0 underflow */
+#define TM6MD_SRC_TM1UFLOW      0x0005  /* - timer 1 underflow */
+#define TM6MD_SRC_TM6IOB_BOTH   0x0006  /* - TM6IOB pin input (both edges) */
+#define TM6MD_SRC_TM6IOB_SINGLE 0x0007  /* - TM6IOB pin input (single edge) */
+#define TM6MD_CLR_ENABLE        0x0010  /* clear count enable */
+#define TM6MD_ONESHOT_ENABLE    0x0040  /* oneshot count */
+#define TM6MD_TRIG_ENABLE       0x0080  /* TM6IOB pin trigger enable */
+#define TM6MD_PWM               0x3800  /* PWM output mode */
+#define TM6MD_PWM_DIS           0x0000  /* - disabled */
+#define TM6MD_PWM_10BIT         0x1000  /* - 10 bits mode */
+#define TM6MD_PWM_11BIT         0x1800  /* - 11 bits mode */
+#define TM6MD_PWM_12BIT         0x3000  /* - 12 bits mode */
+#define TM6MD_PWM_14BIT         0x3800  /* - 14 bits mode */
+#define TM6MD_INIT_COUNTER      0x4000  /* initialize TMnBC to zero */
+#define TM6MD_COUNT_ENABLE      0x8000  /* timer count enable */
+#define TM6MDA                  __SYSREG(0xd40030b4, u8)   /* timer6 cmp/cap A mode reg */
+#define TM6MDA_OUT              0x07    /* output select */
+#define TM6MDA_OUT_SETA_RESETB  0x00    /* - set at match A, reset at match B */
+#define TM6MDA_OUT_SETA_RESETOV 0x01    /* - set at match A, reset at overflow */
+#define TM6MDA_OUT_SETA         0x02    /* - set at match A */
+#define TM6MDA_OUT_RESETA       0x03    /* - reset at match A */
+#define TM6MDA_OUT_TOGGLE       0x04    /* - toggle on match A */
+#define TM6MDA_MODE             0xc0    /* compare A register mode */
+#define TM6MDA_MODE_CMP_SINGLE  0x00    /* - compare, single buffer mode */
+#define TM6MDA_MODE_CMP_DOUBLE  0x40    /* - compare, double buffer mode */
+#define TM6MDA_MODE_CAP_S_EDGE  0x80    /* - capture, single edge mode */
+#define TM6MDA_MODE_CAP_D_EDGE  0xc0    /* - capture, double edge mode */
+#define TM6MDA_EDGE             0x20    /* compare A edge select */
+#define TM6MDA_EDGE_FALLING     0x00    /* capture on falling edge */
+#define TM6MDA_EDGE_RISING      0x20    /* capture on rising edge */
+#define TM6MDA_CAPTURE_ENABLE   0x10    /* capture enable */
+#define TM6MDB                  __SYSREG(0xd40030b5, u8)   /* timer6 cmp/cap B mode reg */
+#define TM6MDB_OUT              0x07    /* output select */
+#define TM6MDB_OUT_SETB_RESETA  0x00    /* - set at match B, reset at match A */
+#define TM6MDB_OUT_SETB_RESETOV 0x01    /* - set at match B */
+#define TM6MDB_OUT_RESETB       0x03    /* - reset at match B */
+#define TM6MDB_OUT_TOGGLE       0x04    /* - toggle on match B */
+#define TM6MDB_MODE             0xc0    /* compare B register mode */
+#define TM6MDB_MODE_CMP_SINGLE  0x00    /* - compare, single buffer mode */
+#define TM6MDB_MODE_CMP_DOUBLE  0x40    /* - compare, double buffer mode */
+#define TM6MDB_MODE_CAP_S_EDGE  0x80    /* - capture, single edge mode */
+#define TM6MDB_MODE_CAP_D_EDGE  0xc0    /* - capture, double edge mode */
+#define TM6MDB_EDGE             0x20    /* compare B edge select */
+#define TM6MDB_EDGE_FALLING     0x00    /* capture on falling edge */
+#define TM6MDB_EDGE_RISING      0x20    /* capture on rising edge */
+#define TM6MDB_CAPTURE_ENABLE   0x10    /* capture enable */
+#define TM6CA                   __SYSREG(0xd40030c4, u16)   /* timer6 cmp/capture reg A */
+#define TM6CB                   __SYSREG(0xd40030d4, u16)   /* timer6 cmp/capture reg B */
+#define TM6BC                   __SYSREG(0xd40030a4, u16)   /* timer6 binary counter */
+#define TM6IRQ                  6       /* timer 6 IRQ */
+#define TM6AIRQ                 9       /* timer 6A IRQ */
+#define TM6BIRQ                 10      /* timer 6B IRQ */
+#define TM6ICR                  GxICR(TM6IRQ)   /* timer 6 uflow intr ctrl reg */
+#define TM6AICR                 GxICR(TM6AIRQ)  /* timer 6A intr control reg */
+#define TM6BICR                 GxICR(TM6BIRQ)  /* timer 6B intr control reg */
+#endif /* __KERNEL__ */
+#endif /* _ASM_TIMER_REGS_H */
diff --git a/arch/mn10300/include/asm/timex.h b/arch/mn10300/include/asm/timex.h
new file mode 100644
index 000000000000..3944277dab67
--- /dev/null
+++ b/arch/mn10300/include/asm/timex.h
@@ -0,0 +1,33 @@
+/* MN10300 Architecture time management specifications
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_TIMEX_H
+#define _ASM_TIMEX_H
+#include <asm/hardirq.h>
+#include <asm/unit/timex.h>
+#define TICK_SIZE (tick_nsec / 1000)
+#define CLOCK_TICK_RATE 1193180 /* Underlying HZ - this should probably be set
+                                 * to something appropriate, but what? */
+extern cycles_t cacheflush_time;
+#ifdef __KERNEL__
+static inline cycles_t get_cycles(void)
+{
+        return read_timestamp_counter();
+}
+#endif /* __KERNEL__ */
+#endif /* _ASM_TIMEX_H */
diff --git a/arch/mn10300/include/asm/tlb.h b/arch/mn10300/include/asm/tlb.h
new file mode 100644
index 000000000000..65d232b96613
--- /dev/null
+++ b/arch/mn10300/include/asm/tlb.h
@@ -0,0 +1,34 @@
+/* MN10300 TLB definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_TLB_H
+#define _ASM_TLB_H
+#include <asm/tlbflush.h>
+extern void check_pgt_cache(void);
+/*
+ * we don't need any special per-pte or per-vma handling...
+ */
+#define tlb_start_vma(tlb, vma)                         do { } while (0)
+#define tlb_end_vma(tlb, vma)                           do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address)      do { } while (0)
+/*
+ * .. because we flush the whole mm when it fills up
+ */
+#define tlb_flush(tlb)  flush_tlb_mm((tlb)->mm)
+/* for now, just use the generic stuff */
+#include <asm-generic/tlb.h>
+#endif /* _ASM_TLB_H */
diff --git a/arch/mn10300/include/asm/tlbflush.h b/arch/mn10300/include/asm/tlbflush.h
new file mode 100644
index 000000000000..e0239865abcb
--- /dev/null
+++ b/arch/mn10300/include/asm/tlbflush.h
@@ -0,0 +1,80 @@
+/* MN10300 TLB flushing functions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_TLBFLUSH_H
+#define _ASM_TLBFLUSH_H
+#include <asm/processor.h>
+#define __flush_tlb()                                           \
+do {                                                            \
+        int w;                                                  \
+        __asm__ __volatile__                                    \
+                ("      mov %1,%0               \n"             \
+                 "      or %2,%0                \n"             \
+                 "      mov %0,%1               \n"             \
+                 : "=d"(w)                                      \
+                 : "m"(MMUCTR), "i"(MMUCTR_IIV|MMUCTR_DIV)      \
+                 : "memory"                                     \
+                 );                                             \
+} while (0)
+#define __flush_tlb_all() __flush_tlb()
+#define __flush_tlb_one(addr) __flush_tlb()
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb() flushes the current mm struct TLBs
+ *  - flush_tlb_all() flushes all processes TLBs
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(mm, start, end) flushes a range of pages
+ *  - flush_tlb_pgtables(mm, start, end) flushes a range of page tables
+ */
+#define flush_tlb_all()                         \
+do {                                            \
+        preempt_disable();                      \
+        __flush_tlb_all();                      \
+        preempt_enable();                       \
+} while (0)
+#define flush_tlb_mm(mm)                        \
+do {                                            \
+        preempt_disable();                      \
+        __flush_tlb_all();                      \
+        preempt_enable();                       \
+} while (0)
+#define flush_tlb_range(vma, start, end)                        \
+do {                                                            \
+        unsigned long __s __attribute__((unused)) = (start);    \
+        unsigned long __e __attribute__((unused)) = (end);      \
+        preempt_disable();                                      \
+        __flush_tlb_all();                                      \
+        preempt_enable();                                       \
+} while (0)
+#define __flush_tlb_global()                    flush_tlb_all()
+#define flush_tlb()                             flush_tlb_all()
+#define flush_tlb_kernel_range(start, end)                      \
+do {                                                            \
+        unsigned long __s __attribute__((unused)) = (start);    \
+        unsigned long __e __attribute__((unused)) = (end);      \
+        flush_tlb_all();                                        \
+} while (0)
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr);
+#define flush_tlb_pgtables(mm, start, end)      do {} while (0)
+#endif /* _ASM_TLBFLUSH_H */
diff --git a/arch/mn10300/include/asm/topology.h b/arch/mn10300/include/asm/topology.h
new file mode 100644
index 000000000000..5428f333a02c
--- /dev/null
+++ b/arch/mn10300/include/asm/topology.h
@@ -0,0 +1 @@
+#include <asm-generic/topology.h>
diff --git a/arch/mn10300/include/asm/types.h b/arch/mn10300/include/asm/types.h
new file mode 100644
index 000000000000..7b9f01042fd4
--- /dev/null
+++ b/arch/mn10300/include/asm/types.h
@@ -0,0 +1,38 @@
+/* MN10300 Basic type definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_TYPES_H
+#define _ASM_TYPES_H
+#include <asm-generic/int-ll64.h>
+#ifndef __ASSEMBLY__
+typedef unsigned short umode_t;
+#endif /* __ASSEMBLY__ */
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+#define BITS_PER_LONG 32
+#ifndef __ASSEMBLY__
+/* Dma addresses are 32-bits wide.  */
+typedef u32 dma_addr_t;
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_TYPES_H */
diff --git a/arch/mn10300/include/asm/uaccess.h b/arch/mn10300/include/asm/uaccess.h
new file mode 100644
index 000000000000..8a3a4dd55763
--- /dev/null
+++ b/arch/mn10300/include/asm/uaccess.h
@@ -0,0 +1,490 @@
+/* MN10300 userspace access functions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UACCESS_H
+#define _ASM_UACCESS_H
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/errno.h>
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+#define MAKE_MM_SEG(s)  ((mm_segment_t) { (s) })
+#define KERNEL_XDS      MAKE_MM_SEG(0xBFFFFFFF)
+#define KERNEL_DS       MAKE_MM_SEG(0x9FFFFFFF)
+#define USER_DS         MAKE_MM_SEG(TASK_SIZE)
+#define get_ds()        (KERNEL_DS)
+#define get_fs()        (current_thread_info()->addr_limit)
+#define set_fs(x)       (current_thread_info()->addr_limit = (x))
+#define __kernel_ds_p() (current_thread_info()->addr_limit.seg == 0x9FFFFFFF)
+#define segment_eq(a, b) ((a).seg == (b).seg)
+#define __addr_ok(addr) \
+        ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg))
+/*
+ * check that a range of addresses falls within the current address limit
+ */
+static inline int ___range_ok(unsigned long addr, unsigned int size)
+{
+        int flag = 1, tmp;
+        asm("   add     %3,%1   \n"     /* set C-flag if addr + size > 4Gb */
+            "   bcs     0f      \n"
+            "   cmp     %4,%1   \n"     /* jump if addr+size>limit (error) */
+            "   bhi     0f      \n"
+            "   clr     %0      \n"     /* mark okay */
+            "0:                 \n"
+            : "=r"(flag), "=&r"(tmp)
+            : "1"(addr), "ir"(size),
+              "r"(current_thread_info()->addr_limit.seg), "0"(flag)
+            : "cc"
+            );
+        return flag;
+}
+#define __range_ok(addr, size) ___range_ok((unsigned long)(addr), (u32)(size))
+#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0)
+#define __access_ok(addr, size)     (__range_ok((addr), (size)) == 0)
+static inline int verify_area(int type, const void *addr, unsigned long size)
+{
+        return access_ok(type, addr, size) ? 0 : -EFAULT;
+}
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+struct exception_table_entry
+{
+        unsigned long insn, fixup;
+};
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern int fixup_exception(struct pt_regs *regs);
+#define put_user(x, ptr) __put_user_check((x), (ptr), sizeof(*(ptr)))
+#define get_user(x, ptr) __get_user_check((x), (ptr), sizeof(*(ptr)))
+/*
+ * The "__xxx" versions do not do address space checking, useful when
+ * doing multiple accesses to the same area (the user has to do the
+ * checks by hand with "access_ok()")
+ */
+#define __put_user(x, ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr)))
+#define __get_user(x, ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+/*
+ * The "xxx_ret" versions return constant specified in third argument, if
+ * something bad happens. These macros can be optimized for the
+ * case of just returning from the function xxx_ret is used.
+ */
+#define put_user_ret(x, ptr, ret) \
+        ({ if (put_user((x), (ptr)))    return (ret); })
+#define get_user_ret(x, ptr, ret) \
+        ({ if (get_user((x), (ptr)))    return (ret); })
+#define __put_user_ret(x, ptr, ret) \
+        ({ if (__put_user((x), (ptr)))  return (ret); })
+#define __get_user_ret(x, ptr, ret) \
+        ({ if (__get_user((x), (ptr)))  return (ret); })
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct *)(x))
+#define __get_user_nocheck(x, ptr, size)        \
+({                                              \
+        __typeof(*(ptr)) __gu_val;              \
+        unsigned long __gu_addr;                \
+        int __gu_err;                           \
+        __gu_addr = (unsigned long) (ptr);      \
+        switch (size) {                         \
+        case 1:  __get_user_asm("bu"); break;   \
+        case 2:  __get_user_asm("hu"); break;   \
+        case 4:  __get_user_asm(""  ); break;   \
+        default: __get_user_unknown(); break;   \
+        }                                       \
+        x = (__typeof__(*(ptr))) __gu_val;      \
+        __gu_err;                               \
+})
+#define __get_user_check(x, ptr, size)                  \
+({                                                      \
+        __typeof__(*(ptr)) __gu_val;                    \
+        unsigned long __gu_addr;                        \
+        int __gu_err;                                   \
+        __gu_addr = (unsigned long) (ptr);              \
+        if (likely(__access_ok(__gu_addr,size))) {      \
+                switch (size) {                         \
+                case 1:  __get_user_asm("bu"); break;   \
+                case 2:  __get_user_asm("hu"); break;   \
+                case 4:  __get_user_asm(""  ); break;   \
+                default: __get_user_unknown(); break;   \
+                }                                       \
+        }                                               \
+        else {                                          \
+                __gu_err = -EFAULT;                     \
+                __gu_val = 0;                           \
+        }                                               \
+        x = (__typeof__(*(ptr))) __gu_val;              \
+        __gu_err;                                       \
+})
+#define __get_user_asm(INSN)                                    \
+({                                                              \
+        asm volatile(                                   \
+                "1:\n"                                          \
+                "       mov"INSN"       %2,%1\n"                \
+                "       mov             0,%0\n"                 \
+                "2:\n"                                          \
+                "       .section        .fixup,\"ax\"\n"        \
+                "3:\n\t"                                        \
+                "       mov             %3,%0\n"                \
+                "       jmp             2b\n"                   \
+                "       .previous\n"                            \
+                "       .section        __ex_table,\"a\"\n"     \
+                "       .balign         4\n"                    \
+                "       .long           1b, 3b\n"               \
+                "       .previous"                              \
+                : "=&r" (__gu_err), "=&r" (__gu_val)            \
+                : "m" (__m(__gu_addr)), "i" (-EFAULT));         \
+})
+extern int __get_user_unknown(void);
+#define __put_user_nocheck(x, ptr, size)                        \
+({                                                              \
+        union {                                                 \
+                __typeof__(*(ptr)) val;                         \
+                u32 bits[2];                                    \
+        } __pu_val;                                             \
+        unsigned long __pu_addr;                                \
+        int __pu_err;                                           \
+        __pu_val.val = (x);                                     \
+        __pu_addr = (unsigned long) (ptr);                      \
+        switch (size) {                                         \
+        case 1:  __put_user_asm("bu"); break;                   \
+        case 2:  __put_user_asm("hu"); break;                   \
+        case 4:  __put_user_asm(""  ); break;                   \
+        case 8:  __put_user_asm8();    break;                   \
+        default: __pu_err = __put_user_unknown(); break;        \
+        }                                                       \
+        __pu_err;                                               \
+})
+#define __put_user_check(x, ptr, size)                                  \
+({                                                                      \
+        union {                                                         \
+                __typeof__(*(ptr)) val;                                 \
+                u32 bits[2];                                            \
+        } __pu_val;                                                     \
+        unsigned long __pu_addr;                                        \
+        int __pu_err;                                                   \
+        __pu_val.val = (x);                                             \
+        __pu_addr = (unsigned long) (ptr);                              \
+        if (likely(__access_ok(__pu_addr, size))) {                     \
+                switch (size) {                                         \
+                case 1:  __put_user_asm("bu"); break;                   \
+                case 2:  __put_user_asm("hu"); break;                   \
+                case 4:  __put_user_asm(""  ); break;                   \
+                case 8:  __put_user_asm8();    break;                   \
+                default: __pu_err = __put_user_unknown(); break;        \
+                }                                                       \
+        }                                                               \
+        else {                                                          \
+                __pu_err = -EFAULT;                                     \
+        }                                                               \
+        __pu_err;                                                       \
+})
+#define __put_user_asm(INSN)                                    \
+({                                                              \
+        asm volatile(                                           \
+                "1:\n"                                          \
+                "       mov"INSN"       %1,%2\n"                \
+                "       mov             0,%0\n"                 \
+                "2:\n"                                          \
+                "       .section        .fixup,\"ax\"\n"        \
+                "3:\n"                                          \
+                "       mov             %3,%0\n"                \
+                "       jmp             2b\n"                   \
+                "       .previous\n"                            \
+                "       .section        __ex_table,\"a\"\n"     \
+                "       .balign         4\n"                    \
+                "       .long           1b, 3b\n"               \
+                "       .previous"                              \
+                : "=&r" (__pu_err)                              \
+                : "r" (__pu_val.val), "m" (__m(__pu_addr)),     \
+                  "i" (-EFAULT)                                 \
+                );                                              \
+})
+#define __put_user_asm8()                                               \
+({                                                                      \
+        asm volatile(                                                   \
+                "1:     mov             %1,%3           \n"             \
+                "2:     mov             %2,%4           \n"             \
+                "       mov             0,%0            \n"             \
+                "3:                                     \n"             \
+                "       .section        .fixup,\"ax\"   \n"             \
+                "4:                                     \n"             \
+                "       mov             %5,%0           \n"             \
+                "       jmp             3b              \n"             \
+                "       .previous                       \n"             \
+                "       .section        __ex_table,\"a\"\n"             \
+                "       .balign         4               \n"             \
+                "       .long           1b, 4b          \n"             \
+                "       .long           2b, 4b          \n"             \
+                "       .previous                       \n"             \
+                : "=&r" (__pu_err)                                      \
+                : "r" (__pu_val.bits[0]), "r" (__pu_val.bits[1]),       \
+                  "m" (__m(__pu_addr)), "m" (__m(__pu_addr+4)),         \
+                  "i" (-EFAULT)                                         \
+                );                                                      \
+})
+extern int __put_user_unknown(void);
+/*
+ * Copy To/From Userspace
+ */
+/* Generic arbitrary sized copy.  */
+#define __copy_user(to, from, size)                                     \
+do {                                                                    \
+        if (size) {                                                     \
+                void *__to = to;                                        \
+                const void *__from = from;                              \
+                int w;                                                  \
+                asm volatile(                                           \
+                        "0:     movbu   (%0),%3;\n"                     \
+                        "1:     movbu   %3,(%1);\n"                     \
+                        "       inc     %0;\n"                          \
+                        "       inc     %1;\n"                          \
+                        "       add     -1,%2;\n"                       \
+                        "       bne     0b;\n"                          \
+                        "2:\n"                                          \
+                        "       .section .fixup,\"ax\"\n"               \
+                        "3:     jmp     2b\n"                           \
+                        "       .previous\n"                            \
+                        "       .section __ex_table,\"a\"\n"            \
+                        "       .balign 4\n"                            \
+                        "       .long   0b,3b\n"                        \
+                        "       .long   1b,3b\n"                        \
+                        "       .previous\n"                            \
+                        : "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\
+                        : "0"(__from), "1"(__to), "2"(size)             \
+                        : "memory");                                    \
+        }                                                               \
+} while (0)
+#define __copy_user_zeroing(to, from, size)                             \
+do {                                                                    \
+        if (size) {                                                     \
+                void *__to = to;                                        \
+                const void *__from = from;                              \
+                int w;                                                  \
+                asm volatile(                                           \
+                        "0:     movbu   (%0),%3;\n"                     \
+                        "1:     movbu   %3,(%1);\n"                     \
+                        "       inc     %0;\n"                          \
+                        "       inc     %1;\n"                          \
+                        "       add     -1,%2;\n"                       \
+                        "       bne     0b;\n"                          \
+                        "2:\n"                                          \
+                        "       .section .fixup,\"ax\"\n"               \
+                        "3:\n"                                          \
+                        "       mov     %2,%0\n"                        \
+                        "       clr     %3\n"                           \
+                        "4:     movbu   %3,(%1);\n"                     \
+                        "       inc     %1;\n"                          \
+                        "       add     -1,%2;\n"                       \
+                        "       bne     4b;\n"                          \
+                        "       mov     %0,%2\n"                        \
+                        "       jmp     2b\n"                           \
+                        "       .previous\n"                            \
+                        "       .section __ex_table,\"a\"\n"            \
+                        "       .balign 4\n"                            \
+                        "       .long   0b,3b\n"                        \
+                        "       .long   1b,3b\n"                        \
+                        "       .previous\n"                            \
+                        : "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\
+                        : "0"(__from), "1"(__to), "2"(size)             \
+                        : "memory");                                    \
+        }                                                               \
+} while (0)
+/* We let the __ versions of copy_from/to_user inline, because they're often
+ * used in fast paths and have only a small space overhead.
+ */
+static inline
+unsigned long __generic_copy_from_user_nocheck(void *to, const void *from,
+                                               unsigned long n)
+{
+        __copy_user_zeroing(to, from, n);
+        return n;
+}
+static inline
+unsigned long __generic_copy_to_user_nocheck(void *to, const void *from,
+                                             unsigned long n)
+{
+        __copy_user(to, from, n);
+        return n;
+}
+#if 0
+#error don't use - these macros don't increment to & from pointers
+/* Optimize just a little bit when we know the size of the move. */
+#define __constant_copy_user(to, from, size)    \
+do {                                            \
+        asm volatile(                           \
+                "       mov %0,a0;\n"           \
+                "0:     movbu (%1),d3;\n"       \
+                "1:     movbu d3,(%2);\n"       \
+                "       add -1,a0;\n"           \
+                "       bne 0b;\n"              \
+                "2:;"                           \
+                ".section .fixup,\"ax\"\n"      \
+                "3:     jmp 2b\n"               \
+                ".previous\n"                   \
+                ".section __ex_table,\"a\"\n"   \
+                "       .balign 4\n"            \
+                "       .long 0b,3b\n"          \
+                "       .long 1b,3b\n"          \
+                ".previous"                     \
+                :                               \
+                : "d"(size), "d"(to), "d"(from) \
+                : "d3", "a0");                  \
+} while (0)
+/* Optimize just a little bit when we know the size of the move. */
+#define __constant_copy_user_zeroing(to, from, size)    \
+do {                                                    \
+        asm volatile(                                   \
+                "       mov %0,a0;\n"                   \
+                "0:     movbu (%1),d3;\n"               \
+                "1:     movbu d3,(%2);\n"               \
+                "       add -1,a0;\n"                   \
+                "       bne 0b;\n"                      \
+                "2:;"                                   \
+                ".section .fixup,\"ax\"\n"              \
+                "3:     jmp 2b\n"                       \
+                ".previous\n"                           \
+                ".section __ex_table,\"a\"\n"           \
+                "       .balign 4\n"                    \
+                "       .long 0b,3b\n"                  \
+                "       .long 1b,3b\n"                  \
+                ".previous"                             \
+                :                                       \
+                : "d"(size), "d"(to), "d"(from)         \
+                : "d3", "a0");                          \
+} while (0)
+static inline
+unsigned long __constant_copy_to_user(void *to, const void *from,
+                                      unsigned long n)
+{
+        if (access_ok(VERIFY_WRITE, to, n))
+                __constant_copy_user(to, from, n);
+        return n;
+}
+static inline
+unsigned long __constant_copy_from_user(void *to, const void *from,
+                                        unsigned long n)
+{
+        if (access_ok(VERIFY_READ, from, n))
+                __constant_copy_user_zeroing(to, from, n);
+        return n;
+}
+static inline
+unsigned long __constant_copy_to_user_nocheck(void *to, const void *from,
+                                              unsigned long n)
+{
+        __constant_copy_user(to, from, n);
+        return n;
+}
+static inline
+unsigned long __constant_copy_from_user_nocheck(void *to, const void *from,
+                                                unsigned long n)
+{
+        __constant_copy_user_zeroing(to, from, n);
+        return n;
+}
+#endif
+extern unsigned long __generic_copy_to_user(void __user *, const void *,
+                                            unsigned long);
+extern unsigned long __generic_copy_from_user(void *, const void __user *,
+                                              unsigned long);
+#define __copy_to_user_inatomic(to, from, n) \
+        __generic_copy_to_user_nocheck((to), (from), (n))
+#define __copy_from_user_inatomic(to, from, n) \
+        __generic_copy_from_user_nocheck((to), (from), (n))
+#define __copy_to_user(to, from, n)                     \
+({                                                      \
+        might_sleep();                                  \
+        __copy_to_user_inatomic((to), (from), (n));     \
+})
+#define __copy_from_user(to, from, n)                   \
+({                                                      \
+        might_sleep();                                  \
+        __copy_from_user_inatomic((to), (from), (n));   \
+})
+#define copy_to_user(to, from, n)   __generic_copy_to_user((to), (from), (n))
+#define copy_from_user(to, from, n) __generic_copy_from_user((to), (from), (n))
+extern long strncpy_from_user(char *dst, const char __user *src, long count);
+extern long __strncpy_from_user(char *dst, const char __user *src, long count);
+extern long strnlen_user(const char __user *str, long n);
+#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
+extern unsigned long clear_user(void __user *mem, unsigned long len);
+extern unsigned long __clear_user(void __user *mem, unsigned long len);
+#endif /* _ASM_UACCESS_H */
diff --git a/arch/mn10300/include/asm/ucontext.h b/arch/mn10300/include/asm/ucontext.h
new file mode 100644
index 000000000000..fcab5c1d8e18
--- /dev/null
+++ b/arch/mn10300/include/asm/ucontext.h
@@ -0,0 +1,22 @@
+/* MN10300 User context
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UCONTEXT_H
+#define _ASM_UCONTEXT_H
+struct ucontext {
+        unsigned long     uc_flags;
+        struct ucontext  *uc_link;
+        stack_t           uc_stack;
+        struct sigcontext uc_mcontext;
+        sigset_t          uc_sigmask;   /* mask last for extensibility */
+};
+#endif /* _ASM_UCONTEXT_H */
diff --git a/arch/mn10300/include/asm/unaligned.h b/arch/mn10300/include/asm/unaligned.h
new file mode 100644
index 000000000000..0df671318ae4
--- /dev/null
+++ b/arch/mn10300/include/asm/unaligned.h
@@ -0,0 +1,20 @@
+/* MN10300 Unaligned memory access handling
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_MN10300_UNALIGNED_H
+#define _ASM_MN10300_UNALIGNED_H
+#include <linux/unaligned/access_ok.h>
+#include <linux/unaligned/generic.h>
+#define get_unaligned   __get_unaligned_le
+#define put_unaligned   __put_unaligned_le
+#endif /* _ASM_MN10300_UNALIGNED_H */
diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h
new file mode 100644
index 000000000000..543a4f98695d
--- /dev/null
+++ b/arch/mn10300/include/asm/unistd.h
@@ -0,0 +1,390 @@
+/* MN10300 System call number list
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNISTD_H
+#define _ASM_UNISTD_H
+#define __NR_restart_syscall      0
+#define __NR_exit                 1
+#define __NR_fork                 2
+#define __NR_read                 3
+#define __NR_write                4
+#define __NR_open                 5
+#define __NR_close                6
+#define __NR_waitpid              7
+#define __NR_creat                8
+#define __NR_link                 9
+#define __NR_unlink              10
+#define __NR_execve              11
+#define __NR_chdir               12
+#define __NR_time                13
+#define __NR_mknod               14
+#define __NR_chmod               15
+#define __NR_lchown              16
+#define __NR_break               17
+#define __NR_oldstat             18
+#define __NR_lseek               19
+#define __NR_getpid              20
+#define __NR_mount               21
+#define __NR_umount              22
+#define __NR_setuid              23
+#define __NR_getuid              24
+#define __NR_stime               25
+#define __NR_ptrace              26
+#define __NR_alarm               27
+#define __NR_oldfstat            28
+#define __NR_pause               29
+#define __NR_utime               30
+#define __NR_stty                31
+#define __NR_gtty                32
+#define __NR_access              33
+#define __NR_nice                34
+#define __NR_ftime               35
+#define __NR_sync                36
+#define __NR_kill                37
+#define __NR_rename              38
+#define __NR_mkdir               39
+#define __NR_rmdir               40
+#define __NR_dup                 41
+#define __NR_pipe                42
+#define __NR_times               43
+#define __NR_prof                44
+#define __NR_brk                 45
+#define __NR_setgid              46
+#define __NR_getgid              47
+#define __NR_signal              48
+#define __NR_geteuid             49
+#define __NR_getegid             50
+#define __NR_acct                51
+#define __NR_umount2             52
+#define __NR_lock                53
+#define __NR_ioctl               54
+#define __NR_fcntl               55
+#define __NR_mpx                 56
+#define __NR_setpgid             57
+#define __NR_ulimit              58
+#define __NR_oldolduname         59
+#define __NR_umask               60
+#define __NR_chroot              61
+#define __NR_ustat               62
+#define __NR_dup2                63
+#define __NR_getppid             64
+#define __NR_getpgrp             65
+#define __NR_setsid              66
+#define __NR_sigaction           67
+#define __NR_sgetmask            68
+#define __NR_ssetmask            69
+#define __NR_setreuid            70
+#define __NR_setregid            71
+#define __NR_sigsuspend          72
+#define __NR_sigpending          73
+#define __NR_sethostname         74
+#define __NR_setrlimit           75
+#define __NR_getrlimit           76     /* Back compatible 2Gig limited rlimit */
+#define __NR_getrusage           77
+#define __NR_gettimeofday        78
+#define __NR_settimeofday        79
+#define __NR_getgroups           80
+#define __NR_setgroups           81
+#define __NR_select              82
+#define __NR_symlink             83
+#define __NR_oldlstat            84
+#define __NR_readlink            85
+#define __NR_uselib              86
+#define __NR_swapon              87
+#define __NR_reboot              88
+#define __NR_readdir             89
+#define __NR_mmap                90
+#define __NR_munmap              91
+#define __NR_truncate            92
+#define __NR_ftruncate           93
+#define __NR_fchmod              94
+#define __NR_fchown              95
+#define __NR_getpriority         96
+#define __NR_setpriority         97
+#define __NR_profil              98
+#define __NR_statfs              99
+#define __NR_fstatfs            100
+#define __NR_ioperm             101
+#define __NR_socketcall         102
+#define __NR_syslog             103
+#define __NR_setitimer          104
+#define __NR_getitimer          105
+#define __NR_stat               106
+#define __NR_lstat              107
+#define __NR_fstat              108
+#define __NR_olduname           109
+#define __NR_iopl               110
+#define __NR_vhangup            111
+#define __NR_idle               112
+#define __NR_vm86old            113
+#define __NR_wait4              114
+#define __NR_swapoff            115
+#define __NR_sysinfo            116
+#define __NR_ipc                117
+#define __NR_fsync              118
+#define __NR_sigreturn          119
+#define __NR_clone              120
+#define __NR_setdomainname      121
+#define __NR_uname              122
+#define __NR_modify_ldt         123
+#define __NR_adjtimex           124
+#define __NR_mprotect           125
+#define __NR_sigprocmask        126
+#define __NR_create_module      127
+#define __NR_init_module        128
+#define __NR_delete_module      129
+#define __NR_get_kernel_syms    130
+#define __NR_quotactl           131
+#define __NR_getpgid            132
+#define __NR_fchdir             133
+#define __NR_bdflush            134
+#define __NR_sysfs              135
+#define __NR_personality        136
+#define __NR_afs_syscall        137 /* Syscall for Andrew File System */
+#define __NR_setfsuid           138
+#define __NR_setfsgid           139
+#define __NR__llseek            140
+#define __NR_getdents           141
+#define __NR__newselect         142
+#define __NR_flock              143
+#define __NR_msync              144
+#define __NR_readv              145
+#define __NR_writev             146
+#define __NR_getsid             147
+#define __NR_fdatasync          148
+#define __NR__sysctl            149
+#define __NR_mlock              150
+#define __NR_munlock            151
+#define __NR_mlockall           152
+#define __NR_munlockall         153
+#define __NR_sched_setparam             154
+#define __NR_sched_getparam             155
+#define __NR_sched_setscheduler         156
+#define __NR_sched_getscheduler         157
+#define __NR_sched_yield                158
+#define __NR_sched_get_priority_max     159
+#define __NR_sched_get_priority_min     160
+#define __NR_sched_rr_get_interval      161
+#define __NR_nanosleep          162
+#define __NR_mremap             163
+#define __NR_setresuid          164
+#define __NR_getresuid          165
+#define __NR_vm86               166
+#define __NR_query_module       167
+#define __NR_poll               168
+#define __NR_nfsservctl         169
+#define __NR_setresgid          170
+#define __NR_getresgid          171
+#define __NR_prctl              172
+#define __NR_rt_sigreturn       173
+#define __NR_rt_sigaction       174
+#define __NR_rt_sigprocmask     175
+#define __NR_rt_sigpending      176
+#define __NR_rt_sigtimedwait    177
+#define __NR_rt_sigqueueinfo    178
+#define __NR_rt_sigsuspend      179
+#define __NR_pread64            180
+#define __NR_pwrite64           181
+#define __NR_chown              182
+#define __NR_getcwd             183
+#define __NR_capget             184
+#define __NR_capset             185
+#define __NR_sigaltstack        186
+#define __NR_sendfile           187
+#define __NR_getpmsg            188     /* some people actually want streams */
+#define __NR_putpmsg            189     /* some people actually want streams */
+#define __NR_vfork              190
+#define __NR_ugetrlimit         191     /* SuS compliant getrlimit */
+#define __NR_mmap2              192
+#define __NR_truncate64         193
+#define __NR_ftruncate64        194
+#define __NR_stat64             195
+#define __NR_lstat64            196
+#define __NR_fstat64            197
+#define __NR_lchown32           198
+#define __NR_getuid32           199
+#define __NR_getgid32           200
+#define __NR_geteuid32          201
+#define __NR_getegid32          202
+#define __NR_setreuid32         203
+#define __NR_setregid32         204
+#define __NR_getgroups32        205
+#define __NR_setgroups32        206
+#define __NR_fchown32           207
+#define __NR_setresuid32        208
+#define __NR_getresuid32        209
+#define __NR_setresgid32        210
+#define __NR_getresgid32        211
+#define __NR_chown32            212
+#define __NR_setuid32           213
+#define __NR_setgid32           214
+#define __NR_setfsuid32         215
+#define __NR_setfsgid32         216
+#define __NR_pivot_root         217
+#define __NR_mincore            218
+#define __NR_madvise            219
+#define __NR_madvise1           219     /* delete when C lib stub is removed */
+#define __NR_getdents64         220
+#define __NR_fcntl64            221
+/* 223 is unused */
+#define __NR_gettid             224
+#define __NR_readahead          225
+#define __NR_setxattr           226
+#define __NR_lsetxattr          227
+#define __NR_fsetxattr          228
+#define __NR_getxattr           229
+#define __NR_lgetxattr          230
+#define __NR_fgetxattr          231
+#define __NR_listxattr          232
+#define __NR_llistxattr         233
+#define __NR_flistxattr         234
+#define __NR_removexattr        235
+#define __NR_lremovexattr       236
+#define __NR_fremovexattr       237
+#define __NR_tkill              238
+#define __NR_sendfile64         239
+#define __NR_futex              240
+#define __NR_sched_setaffinity  241
+#define __NR_sched_getaffinity  242
+#define __NR_set_thread_area    243
+#define __NR_get_thread_area    244
+#define __NR_io_setup           245
+#define __NR_io_destroy         246
+#define __NR_io_getevents       247
+#define __NR_io_submit          248
+#define __NR_io_cancel          249
+#define __NR_fadvise64          250
+#define __NR_exit_group         252
+#define __NR_lookup_dcookie     253
+#define __NR_epoll_create       254
+#define __NR_epoll_ctl          255
+#define __NR_epoll_wait         256
+#define __NR_remap_file_pages   257
+#define __NR_set_tid_address    258
+#define __NR_timer_create       259
+#define __NR_timer_settime      (__NR_timer_create+1)
+#define __NR_timer_gettime      (__NR_timer_create+2)
+#define __NR_timer_getoverrun   (__NR_timer_create+3)
+#define __NR_timer_delete       (__NR_timer_create+4)
+#define __NR_clock_settime      (__NR_timer_create+5)
+#define __NR_clock_gettime      (__NR_timer_create+6)
+#define __NR_clock_getres       (__NR_timer_create+7)
+#define __NR_clock_nanosleep    (__NR_timer_create+8)
+#define __NR_statfs64           268
+#define __NR_fstatfs64          269
+#define __NR_tgkill             270
+#define __NR_utimes             271
+#define __NR_fadvise64_64       272
+#define __NR_vserver            273
+#define __NR_mbind              274
+#define __NR_get_mempolicy      275
+#define __NR_set_mempolicy      276
+#define __NR_mq_open            277
+#define __NR_mq_unlink          (__NR_mq_open+1)
+#define __NR_mq_timedsend       (__NR_mq_open+2)
+#define __NR_mq_timedreceive    (__NR_mq_open+3)
+#define __NR_mq_notify          (__NR_mq_open+4)
+#define __NR_mq_getsetattr      (__NR_mq_open+5)
+#define __NR_kexec_load         283
+#define __NR_waitid             284
+#define __NR_add_key            286
+#define __NR_request_key        287
+#define __NR_keyctl             288
+#define __NR_cacheflush         289
+#define __NR_ioprio_set         290
+#define __NR_ioprio_get         291
+#define __NR_inotify_init       292
+#define __NR_inotify_add_watch  293
+#define __NR_inotify_rm_watch   294
+#define __NR_migrate_pages      295
+#define __NR_openat             296
+#define __NR_mkdirat            297
+#define __NR_mknodat            298
+#define __NR_fchownat           299
+#define __NR_futimesat          300
+#define __NR_fstatat64          301
+#define __NR_unlinkat           302
+#define __NR_renameat           303
+#define __NR_linkat             304
+#define __NR_symlinkat          305
+#define __NR_readlinkat         306
+#define __NR_fchmodat           307
+#define __NR_faccessat          308
+#define __NR_pselect6           309
+#define __NR_ppoll              310
+#define __NR_unshare            311
+#define __NR_set_robust_list    312
+#define __NR_get_robust_list    313
+#define __NR_splice             314
+#define __NR_sync_file_range    315
+#define __NR_tee                316
+#define __NR_vmsplice           317
+#define __NR_move_pages         318
+#define __NR_getcpu             319
+#define __NR_epoll_pwait        320
+#define __NR_utimensat          321
+#define __NR_signalfd           322
+#define __NR_timerfd_create     323
+#define __NR_eventfd            324
+#define __NR_fallocate          325
+#define __NR_timerfd_settime    326
+#define __NR_timerfd_gettime    327
+#define __NR_signalfd4          328
+#define __NR_eventfd2           329
+#define __NR_epoll_create1      330
+#define __NR_dup3               331
+#define __NR_pipe2              332
+#define __NR_inotify_init1      333
+#ifdef __KERNEL__
+#define NR_syscalls 326
+/*
+ * specify the deprecated syscalls we want to support on this arch
+ */
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#ifndef cond_syscall
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall");
+#endif
+#endif /* __KERNEL__ */
+#endif /* _ASM_UNISTD_H */
diff --git a/arch/mn10300/include/asm/unit-asb2303/clock.h b/arch/mn10300/include/asm/unit-asb2303/clock.h
new file mode 100644
index 000000000000..8b450e920af1
--- /dev/null
+++ b/arch/mn10300/include/asm/unit-asb2303/clock.h
@@ -0,0 +1,45 @@
+/* ASB2303-specific clocks
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_CLOCK_H
+#define _ASM_UNIT_CLOCK_H
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_MN10300_RTC
+extern unsigned long mn10300_ioclk;     /* IOCLK (crystal speed) in HZ */
+extern unsigned long mn10300_iobclk;
+extern unsigned long mn10300_tsc_per_HZ;
+#define MN10300_IOCLK           ((unsigned long)mn10300_ioclk)
+/* If this processors has a another clock, uncomment the below. */
+/* #define MN10300_IOBCLK       ((unsigned long)mn10300_iobclk) */
+#else /* !CONFIG_MN10300_RTC */
+#define MN10300_IOCLK           33333333UL
+/* #define MN10300_IOBCLK       66666666UL */
+#endif /* !CONFIG_MN10300_RTC */
+#define MN10300_JCCLK           MN10300_IOCLK
+#define MN10300_TSCCLK          MN10300_IOCLK
+#ifdef CONFIG_MN10300_RTC
+#define MN10300_TSC_PER_HZ      ((unsigned long)mn10300_tsc_per_HZ)
+#else /* !CONFIG_MN10300_RTC */
+#define MN10300_TSC_PER_HZ      (MN10300_TSCCLK/HZ)
+#endif /* !CONFIG_MN10300_RTC */
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_UNIT_CLOCK_H */
diff --git a/arch/mn10300/include/asm/unit-asb2303/leds.h b/arch/mn10300/include/asm/unit-asb2303/leds.h
new file mode 100644
index 000000000000..3a7543ea7b5c
--- /dev/null
+++ b/arch/mn10300/include/asm/unit-asb2303/leds.h
@@ -0,0 +1,43 @@
+/* ASB2303-specific LEDs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_LEDS_H
+#define _ASM_UNIT_LEDS_H
+#include <asm/pio-regs.h>
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+#define ASB2303_GPIO0DEF        __SYSREG(0xDB000000, u32)
+#define ASB2303_7SEGLEDS        __SYSREG(0xDB000008, u32)
+/*
+ * use the 7-segment LEDs to indicate states
+ */
+/* flip the 7-segment LEDs between "G" and "-" */
+#define mn10300_set_gdbleds(ONOFF)                      \
+do {                                                    \
+        ASB2303_7SEGLEDS = (ONOFF) ? 0x85 : 0x7f;       \
+} while (0)
+/* indicate double-fault by displaying "d" on the LEDs */
+#define mn10300_set_dbfleds                     \
+        mov     0x43,d0                 ;       \
+        movbu   d0,(ASB2303_7SEGLEDS)
+#ifndef __ASSEMBLY__
+extern void peripheral_leds_display_exception(enum exception_code code);
+extern void peripheral_leds_led_chase(void);
+extern void debug_to_serial(const char *p, int n);
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_UNIT_LEDS_H */
diff --git a/arch/mn10300/include/asm/unit-asb2303/serial.h b/arch/mn10300/include/asm/unit-asb2303/serial.h
new file mode 100644
index 000000000000..0d55cf5896ac
--- /dev/null
+++ b/arch/mn10300/include/asm/unit-asb2303/serial.h
@@ -0,0 +1,136 @@
+/* ASB2303-specific 8250 serial ports
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_SERIAL_H
+#define _ASM_UNIT_SERIAL_H
+#include <asm/cpu-regs.h>
+#include <asm/proc/irq.h>
+#include <linux/serial_reg.h>
+#define SERIAL_PORT0_BASE_ADDRESS       0xA6FB0000
+#define SERIAL_PORT1_BASE_ADDRESS       0xA6FC0000
+#define SERIAL_IRQ      XIRQ0   /* Dual serial (PC16552)        (Hi) */
+/*
+ * dispose of the /dev/ttyS0 and /dev/ttyS1 serial ports
+ */
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+#define SERIAL_PORT_DFNS                                                \
+        {                                                               \
+        .baud_base              = BASE_BAUD,                            \
+        .irq                    = SERIAL_IRQ,                           \
+        .flags                  = STD_COM_FLAGS,                        \
+        .iomem_base             = (u8 *) SERIAL_PORT0_BASE_ADDRESS,     \
+        .iomem_reg_shift        = 2,                                    \
+        .io_type                = SERIAL_IO_MEM,                        \
+        },                                                              \
+        {                                                               \
+        .baud_base              = BASE_BAUD,                            \
+        .irq                    = SERIAL_IRQ,                           \
+        .flags                  = STD_COM_FLAGS,                        \
+        .iomem_base             = (u8 *) SERIAL_PORT1_BASE_ADDRESS,     \
+        .iomem_reg_shift        = 2,                                    \
+        .io_type                = SERIAL_IO_MEM,                        \
+        },
+#ifndef __ASSEMBLY__
+static inline void __debug_to_serial(const char *p, int n)
+{
+}
+#endif /* !__ASSEMBLY__ */
+#else /* CONFIG_GDBSTUB_ON_TTYSx */
+#define SERIAL_PORT_DFNS /* both stolen by gdb-stub because they share an IRQ */
+#if defined(CONFIG_GDBSTUB_ON_TTYS0)
+#define GDBPORT_SERIAL_RX       __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX  * 4, u8)
+#define GDBPORT_SERIAL_TX       __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX  * 4, u8)
+#define GDBPORT_SERIAL_DLL      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8)
+#define GDBPORT_SERIAL_DLM      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8)
+#define GDBPORT_SERIAL_IER      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8)
+#define GDBPORT_SERIAL_IIR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8)
+#define GDBPORT_SERIAL_FCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8)
+#define GDBPORT_SERIAL_LCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8)
+#define GDBPORT_SERIAL_MCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define GDBPORT_SERIAL_LSR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define GDBPORT_SERIAL_MSR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+#define GDBPORT_SERIAL_SCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8)
+#define GDBPORT_SERIAL_IRQ      SERIAL_IRQ
+#elif defined(CONFIG_GDBSTUB_ON_TTYS1)
+#define GDBPORT_SERIAL_RX       __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_RX  * 4, u8)
+#define GDBPORT_SERIAL_TX       __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_TX  * 4, u8)
+#define GDBPORT_SERIAL_DLL      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLL * 4, u8)
+#define GDBPORT_SERIAL_DLM      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLM * 4, u8)
+#define GDBPORT_SERIAL_IER      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IER * 4, u8)
+#define GDBPORT_SERIAL_IIR      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IIR * 4, u8)
+#define GDBPORT_SERIAL_FCR      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_FCR * 4, u8)
+#define GDBPORT_SERIAL_LCR      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LCR * 4, u8)
+#define GDBPORT_SERIAL_MCR      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MCR * 4, u8)
+#define GDBPORT_SERIAL_LSR      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LSR * 4, u8)
+#define GDBPORT_SERIAL_MSR      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MSR * 4, u8)
+#define GDBPORT_SERIAL_SCR      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_SCR * 4, u8)
+#define GDBPORT_SERIAL_IRQ      SERIAL_IRQ
+#endif
+#ifndef __ASSEMBLY__
+#define LSR_WAIT_FOR(STATE)                                     \
+do {                                                            \
+        while (!(GDBPORT_SERIAL_LSR & UART_LSR_##STATE)) {}     \
+} while (0)
+#define FLOWCTL_WAIT_FOR(LINE)                                  \
+do {                                                            \
+        while (!(GDBPORT_SERIAL_MSR & UART_MSR_##LINE)) {}      \
+} while (0)
+#define FLOWCTL_CLEAR(LINE)                     \
+do {                                            \
+        GDBPORT_SERIAL_MCR &= ~UART_MCR_##LINE; \
+} while (0)
+#define FLOWCTL_SET(LINE)                       \
+do {                                            \
+        GDBPORT_SERIAL_MCR |= UART_MCR_##LINE;  \
+} while (0)
+#define FLOWCTL_QUERY(LINE)     ({ GDBPORT_SERIAL_MSR & UART_MSR_##LINE; })
+static inline void __debug_to_serial(const char *p, int n)
+{
+        char ch;
+        FLOWCTL_SET(DTR);
+        for (; n > 0; n--) {
+                LSR_WAIT_FOR(THRE);
+                FLOWCTL_WAIT_FOR(CTS);
+                ch = *p++;
+                if (ch == 0x0a) {
+                        GDBPORT_SERIAL_TX = 0x0d;
+                        LSR_WAIT_FOR(THRE);
+                        FLOWCTL_WAIT_FOR(CTS);
+                }
+                GDBPORT_SERIAL_TX = ch;
+        }
+        FLOWCTL_CLEAR(DTR);
+}
+#endif /* !__ASSEMBLY__ */
+#endif /* CONFIG_GDBSTUB_ON_TTYSx */
+#endif /* _ASM_UNIT_SERIAL_H */
diff --git a/arch/mn10300/include/asm/unit-asb2303/smc91111.h b/arch/mn10300/include/asm/unit-asb2303/smc91111.h
new file mode 100644
index 000000000000..dd456e9c513f
--- /dev/null
+++ b/arch/mn10300/include/asm/unit-asb2303/smc91111.h
@@ -0,0 +1,50 @@
+/* Support for the SMC91C111 NIC on an ASB2303
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_SMC91111_H
+#define _ASM_UNIT_SMC91111_H
+#include <asm/intctl-regs.h>
+#define SMC91111_BASE           0xAA000300UL
+#define SMC91111_BASE_END       0xAA000400UL
+#define SMC91111_IRQ            XIRQ3
+#define SMC_CAN_USE_8BIT        0
+#define SMC_CAN_USE_16BIT       1
+#define SMC_CAN_USE_32BIT       0
+#define SMC_NOWAIT              1
+#define SMC_IRQ_FLAGS           (0)
+#if SMC_CAN_USE_8BIT
+#define SMC_inb(a, r)           inb((unsigned long) ((a) + (r)))
+#define SMC_outb(v, a, r)       outb(v, (unsigned long) ((a) + (r)))
+#endif
+#if SMC_CAN_USE_16BIT
+#define SMC_inw(a, r)           inw((unsigned long) ((a) + (r)))
+#define SMC_outw(v, a, r)       outw(v, (unsigned long) ((a) + (r)))
+#define SMC_insw(a, r, p, l)    insw((unsigned long) ((a) + (r)), (p), (l))
+#define SMC_outsw(a, r, p, l)   outsw((unsigned long) ((a) + (r)), (p), (l))
+#endif
+#if SMC_CAN_USE_32BIT
+#define SMC_inl(a, r)           inl((unsigned long) ((a) + (r)))
+#define SMC_outl(v, a, r)       outl(v, (unsigned long) ((a) + (r)))
+#define SMC_insl(a, r, p, l)    insl((unsigned long) ((a) + (r)), (p), (l))
+#define SMC_outsl(a, r, p, l)   outsl((unsigned long) ((a) + (r)), (p), (l))
+#endif
+#define RPC_LSA_DEFAULT         RPC_LED_100_10
+#define RPC_LSB_DEFAULT         RPC_LED_TX_RX
+#define set_irq_type(irq, type)
+#endif /*  _ASM_UNIT_SMC91111_H */
diff --git a/arch/mn10300/include/asm/unit-asb2303/timex.h b/arch/mn10300/include/asm/unit-asb2303/timex.h
new file mode 100644
index 000000000000..7e54b0cfdd03
--- /dev/null
+++ b/arch/mn10300/include/asm/unit-asb2303/timex.h
@@ -0,0 +1,135 @@
+/* ASB2303-specific timer specifcations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_TIMEX_H
+#define _ASM_UNIT_TIMEX_H
+#ifndef __ASSEMBLY__
+#include <linux/irq.h>
+#endif /* __ASSEMBLY__ */
+#include <asm/timer-regs.h>
+#include <asm/unit/clock.h>
+/*
+ * jiffies counter specifications
+ */
+#define TMJCBR_MAX              0xffff
+#define TMJCBC                  TM01BC
+#define TMJCMD                  TM01MD
+#define TMJCBR                  TM01BR
+#define TMJCIRQ                 TM1IRQ
+#define TMJCICR                 TM1ICR
+#define TMJCICR_LEVEL           GxICR_LEVEL_5
+#ifndef __ASSEMBLY__
+static inline void startup_jiffies_counter(void)
+{
+        unsigned rate;
+        u16 md, t16;
+        /* use as little prescaling as possible to avoid losing accuracy */
+        md = TM0MD_SRC_IOCLK;
+        rate = MN10300_JCCLK / HZ;
+        if (rate > TMJCBR_MAX) {
+                md = TM0MD_SRC_IOCLK_8;
+                rate = MN10300_JCCLK / 8 / HZ;
+                if (rate > TMJCBR_MAX) {
+                        md = TM0MD_SRC_IOCLK_32;
+                        rate = MN10300_JCCLK / 32 / HZ;
+                        if (rate > TMJCBR_MAX)
+                                BUG();
+                }
+        }
+        TMJCBR = rate - 1;
+        t16 = TMJCBR;
+        TMJCMD =
+                md |
+                TM1MD_SRC_TM0CASCADE << 8 |
+                TM0MD_INIT_COUNTER |
+                TM1MD_INIT_COUNTER << 8;
+        TMJCMD =
+                md |
+                TM1MD_SRC_TM0CASCADE << 8 |
+                TM0MD_COUNT_ENABLE |
+                TM1MD_COUNT_ENABLE << 8;
+        t16 = TMJCMD;
+        TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
+        t16 = TMJCICR;
+}
+static inline void shutdown_jiffies_counter(void)
+{
+}
+#endif /* !__ASSEMBLY__ */
+/*
+ * timestamp counter specifications
+ */
+#define TMTSCBR_MAX             0xffffffff
+#define TMTSCBC                 TM45BC
+#ifndef __ASSEMBLY__
+static inline void startup_timestamp_counter(void)
+{
+        /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time
+         * - count down from 4Gig-1 to 0 and wrap at IOCLK rate
+         */
+        TM45BR = TMTSCBR_MAX;
+        TM4MD = TM4MD_SRC_IOCLK;
+        TM4MD |= TM4MD_INIT_COUNTER;
+        TM4MD &= ~TM4MD_INIT_COUNTER;
+        TM4ICR = 0;
+        TM5MD = TM5MD_SRC_TM4CASCADE;
+        TM5MD |= TM5MD_INIT_COUNTER;
+        TM5MD &= ~TM5MD_INIT_COUNTER;
+        TM5ICR = 0;
+        TM5MD |= TM5MD_COUNT_ENABLE;
+        TM4MD |= TM4MD_COUNT_ENABLE;
+}
+static inline void shutdown_timestamp_counter(void)
+{
+        TM4MD = 0;
+        TM5MD = 0;
+}
+/*
+ * we use a cascaded pair of 16-bit down-counting timers to count I/O
+ * clock cycles for the purposes of time keeping
+ */
+typedef unsigned long cycles_t;
+static inline cycles_t read_timestamp_counter(void)
+{
+        return (cycles_t)TMTSCBC;
+}
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_UNIT_TIMEX_H */
diff --git a/arch/mn10300/include/asm/unit-asb2305/clock.h b/arch/mn10300/include/asm/unit-asb2305/clock.h
new file mode 100644
index 000000000000..7d514841ffda
--- /dev/null
+++ b/arch/mn10300/include/asm/unit-asb2305/clock.h
@@ -0,0 +1,45 @@
+/* ASB2305-specific clocks
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_CLOCK_H
+#define _ASM_UNIT_CLOCK_H
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_MN10300_RTC
+extern unsigned long mn10300_ioclk;     /* IOCLK (crystal speed) in HZ */
+extern unsigned long mn10300_iobclk;
+extern unsigned long mn10300_tsc_per_HZ;
+#define MN10300_IOCLK           ((unsigned long)mn10300_ioclk)
+/* If this processors has a another clock, uncomment the below. */
+/* #define MN10300_IOBCLK       ((unsigned long)mn10300_iobclk) */
+#else /* !CONFIG_MN10300_RTC */
+#define MN10300_IOCLK           33333333UL
+/* #define MN10300_IOBCLK       66666666UL */
+#endif /* !CONFIG_MN10300_RTC */
+#define MN10300_JCCLK           MN10300_IOCLK
+#define MN10300_TSCCLK          MN10300_IOCLK
+#ifdef CONFIG_MN10300_RTC
+#define MN10300_TSC_PER_HZ      ((unsigned long)mn10300_tsc_per_HZ)
+#else /* !CONFIG_MN10300_RTC */
+#define MN10300_TSC_PER_HZ      (MN10300_TSCCLK/HZ)
+#endif /* !CONFIG_MN10300_RTC */
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_UNIT_CLOCK_H */
diff --git a/arch/mn10300/include/asm/unit-asb2305/leds.h b/arch/mn10300/include/asm/unit-asb2305/leds.h
new file mode 100644
index 000000000000..bc471f617fd1
--- /dev/null
+++ b/arch/mn10300/include/asm/unit-asb2305/leds.h
@@ -0,0 +1,51 @@
+/* ASB2305-specific LEDs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_LEDS_H
+#define _ASM_UNIT_LEDS_H
+#include <asm/pio-regs.h>
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+#define ASB2305_7SEGLEDS        __SYSREG(0xA6F90000, u32)
+/* perform a hard reset by driving PIO06 low */
+#define mn10300_unit_hard_reset()               \
+do {                                            \
+        P0OUT &= 0xbf;                          \
+        P0MD = (P0MD & P0MD_6) | P0MD_6_OUT;    \
+} while (0)
+/*
+ * use the 7-segment LEDs to indicate states
+ */
+/* indicate double-fault by displaying "db-f" on the LEDs */
+#define mn10300_set_dbfleds                     \
+        mov     0x43077f1d,d0           ;       \
+        mov     d0,(ASB2305_7SEGLEDS)
+/* flip the 7-segment LEDs between "Gdb-" and "----" */
+#define mn10300_set_gdbleds(ONOFF)                              \
+do {                                                            \
+        ASB2305_7SEGLEDS = (ONOFF) ? 0x8543077f : 0x7f7f7f7f;   \
+} while (0)
+#ifndef __ASSEMBLY__
+extern void peripheral_leds_display_exception(enum exception_code);
+extern void peripheral_leds_led_chase(void);
+extern void peripheral_leds7x4_display_dec(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_hex(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_minssecs(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_rtc(void);
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_UNIT_LEDS_H */
diff --git a/arch/mn10300/include/asm/unit-asb2305/serial.h b/arch/mn10300/include/asm/unit-asb2305/serial.h
new file mode 100644
index 000000000000..73d31d67bb71
--- /dev/null
+++ b/arch/mn10300/include/asm/unit-asb2305/serial.h
@@ -0,0 +1,120 @@
+/* ASB2305-specific 8250 serial ports
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_SERIAL_H
+#define _ASM_UNIT_SERIAL_H
+#include <asm/cpu/cpu-regs.h>
+#include <asm/proc/irq.h>
+#include <linux/serial_reg.h>
+#define SERIAL_PORT0_BASE_ADDRESS       0xA6FB0000
+#define ASB2305_DEBUG_MCR       __SYSREG(0xA6FB0000 + UART_MCR * 2, u8)
+#define SERIAL_IRQ      XIRQ0   /* Dual serial (PC16552)        (Hi) */
+/*
+ * dispose of the /dev/ttyS0 serial port
+ */
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+#define SERIAL_PORT_DFNS                                                \
+        {                                                               \
+        .baud_base              = BASE_BAUD,                            \
+        .irq                    = SERIAL_IRQ,                           \
+        .flags                  = STD_COM_FLAGS,                        \
+        .iomem_base             = (u8 *) SERIAL_PORT0_BASE_ADDRESS,     \
+        .iomem_reg_shift        = 2,                                    \
+        .io_type                = SERIAL_IO_MEM,                        \
+        },
+#ifndef __ASSEMBLY__
+static inline void __debug_to_serial(const char *p, int n)
+{
+}
+#endif /* !__ASSEMBLY__ */
+#else /* CONFIG_GDBSTUB_ON_TTYSx */
+#define SERIAL_PORT_DFNS /* stolen by gdb-stub */
+#if defined(CONFIG_GDBSTUB_ON_TTYS0)
+#define GDBPORT_SERIAL_RX       __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX  * 4, u8)
+#define GDBPORT_SERIAL_TX       __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX  * 4, u8)
+#define GDBPORT_SERIAL_DLL      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8)
+#define GDBPORT_SERIAL_DLM      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8)
+#define GDBPORT_SERIAL_IER      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8)
+#define GDBPORT_SERIAL_IIR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8)
+#define GDBPORT_SERIAL_FCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8)
+#define GDBPORT_SERIAL_LCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8)
+#define GDBPORT_SERIAL_MCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define GDBPORT_SERIAL_LSR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define GDBPORT_SERIAL_MSR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+#define GDBPORT_SERIAL_SCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8)
+#define GDBPORT_SERIAL_IRQ      SERIAL_IRQ
+#elif defined(CONFIG_GDBSTUB_ON_TTYS1)
+#error The ASB2305 doesnt have a /dev/ttyS1
+#endif
+#ifndef __ASSEMBLY__
+#define TTYS0_TX        __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX  * 4, u8)
+#define TTYS0_MCR       __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define TTYS0_LSR       __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define TTYS0_MSR       __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+#define LSR_WAIT_FOR(STATE)                             \
+do {                                                    \
+        while (!(TTYS0_LSR & UART_LSR_##STATE)) {}      \
+} while (0)
+#define FLOWCTL_WAIT_FOR(LINE)                          \
+do {                                                    \
+        while (!(TTYS0_MSR & UART_MSR_##LINE)) {}       \
+} while (0)
+#define FLOWCTL_CLEAR(LINE)                     \
+do {                                            \
+        TTYS0_MCR &= ~UART_MCR_##LINE;          \
+} while (0)
+#define FLOWCTL_SET(LINE)                       \
+do {                                            \
+        TTYS0_MCR |= UART_MCR_##LINE;           \
+} while (0)
+#define FLOWCTL_QUERY(LINE)     ({ TTYS0_MSR & UART_MSR_##LINE; })
+static inline void __debug_to_serial(const char *p, int n)
+{
+        char ch;
+        FLOWCTL_SET(DTR);
+        for (; n > 0; n--) {
+                LSR_WAIT_FOR(THRE);
+                FLOWCTL_WAIT_FOR(CTS);
+                ch = *p++;
+                if (ch == 0x0a) {
+                        TTYS0_TX = 0x0d;
+                        LSR_WAIT_FOR(THRE);
+                        FLOWCTL_WAIT_FOR(CTS);
+                }
+                TTYS0_TX = ch;
+        }
+        FLOWCTL_CLEAR(DTR);
+}
+#endif /* !__ASSEMBLY__ */
+#endif /* CONFIG_GDBSTUB_ON_TTYSx */
+#endif /* _ASM_UNIT_SERIAL_H */
diff --git a/arch/mn10300/include/asm/unit-asb2305/timex.h b/arch/mn10300/include/asm/unit-asb2305/timex.h
new file mode 100644
index 000000000000..10e1bfe34463
--- /dev/null
+++ b/arch/mn10300/include/asm/unit-asb2305/timex.h
@@ -0,0 +1,135 @@
+/* ASB2305 timer specifcations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_TIMEX_H
+#define _ASM_UNIT_TIMEX_H
+#ifndef __ASSEMBLY__
+#include <linux/irq.h>
+#endif /* __ASSEMBLY__ */
+#include <asm/cpu/timer-regs.h>
+#include <asm/unit/clock.h>
+/*
+ * jiffies counter specifications
+ */
+#define TMJCBR_MAX              0xffff
+#define TMJCBC                  TM01BC
+#define TMJCMD                  TM01MD
+#define TMJCBR                  TM01BR
+#define TMJCIRQ                 TM1IRQ
+#define TMJCICR                 TM1ICR
+#define TMJCICR_LEVEL           GxICR_LEVEL_5
+#ifndef __ASSEMBLY__
+static inline void startup_jiffies_counter(void)
+{
+        unsigned rate;
+        u16 md, t16;
+        /* use as little prescaling as possible to avoid losing accuracy */
+        md = TM0MD_SRC_IOCLK;
+        rate = MN10300_JCCLK / HZ;
+        if (rate > TMJCBR_MAX) {
+                md = TM0MD_SRC_IOCLK_8;
+                rate = MN10300_JCCLK / 8 / HZ;
+                if (rate > TMJCBR_MAX) {
+                        md = TM0MD_SRC_IOCLK_32;
+                        rate = MN10300_JCCLK / 32 / HZ;
+                        if (rate > TMJCBR_MAX)
+                                BUG();
+                }
+        }
+        TMJCBR = rate - 1;
+        t16 = TMJCBR;
+        TMJCMD =
+                md |
+                TM1MD_SRC_TM0CASCADE << 8 |
+                TM0MD_INIT_COUNTER |
+                TM1MD_INIT_COUNTER << 8;
+        TMJCMD =
+                md |
+                TM1MD_SRC_TM0CASCADE << 8 |
+                TM0MD_COUNT_ENABLE |
+                TM1MD_COUNT_ENABLE << 8;
+        t16 = TMJCMD;
+        TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
+        t16 = TMJCICR;
+}
+static inline void shutdown_jiffies_counter(void)
+{
+}
+#endif /* !__ASSEMBLY__ */
+/*
+ * timestamp counter specifications
+ */
+#define TMTSCBR_MAX             0xffffffff
+#define TMTSCBC                 TM45BC
+#ifndef __ASSEMBLY__
+static inline void startup_timestamp_counter(void)
+{
+        /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time
+         * - count down from 4Gig-1 to 0 and wrap at IOCLK rate
+         */
+        TM45BR = TMTSCBR_MAX;
+        TM4MD = TM4MD_SRC_IOCLK;
+        TM4MD |= TM4MD_INIT_COUNTER;
+        TM4MD &= ~TM4MD_INIT_COUNTER;
+        TM4ICR = 0;
+        TM5MD = TM5MD_SRC_TM4CASCADE;
+        TM5MD |= TM5MD_INIT_COUNTER;
+        TM5MD &= ~TM5MD_INIT_COUNTER;
+        TM5ICR = 0;
+        TM5MD |= TM5MD_COUNT_ENABLE;
+        TM4MD |= TM4MD_COUNT_ENABLE;
+}
+static inline void shutdown_timestamp_counter(void)
+{
+        TM4MD = 0;
+        TM5MD = 0;
+}
+/*
+ * we use a cascaded pair of 16-bit down-counting timers to count I/O
+ * clock cycles for the purposes of time keeping
+ */
+typedef unsigned long cycles_t;
+static inline cycles_t read_timestamp_counter(void)
+{
+        return (cycles_t) TMTSCBC;
+}
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_UNIT_TIMEX_H */
diff --git a/arch/mn10300/include/asm/user.h b/arch/mn10300/include/asm/user.h
new file mode 100644
index 000000000000..e1193908b78c
--- /dev/null
+++ b/arch/mn10300/include/asm/user.h
@@ -0,0 +1,53 @@
+/* MN10300 User process data
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_USER_H
+#define _ASM_USER_H
+#include <asm/page.h>
+#include <linux/ptrace.h>
+#ifndef __ASSEMBLY__
+/*
+ * When the kernel dumps core, it starts by dumping the user struct - this will
+ * be used by gdb to figure out where the data and stack segments are within
+ * the file, and what virtual addresses to use.
+ */
+struct user {
+        /* We start with the registers, to mimic the way that "memory" is
+         * returned from the ptrace(3,...) function.
+         */
+        struct pt_regs regs;            /* Where the registers are actually stored */
+        /* The rest of this junk is to help gdb figure out what goes where */
+        unsigned long int u_tsize;      /* Text segment size (pages). */
+        unsigned long int u_dsize;      /* Data segment size (pages). */
+        unsigned long int u_ssize;      /* Stack segment size (pages). */
+        unsigned long start_code;       /* Starting virtual address of text. */
+        unsigned long start_stack;      /* Starting virtual address of stack area.
+                                           This is actually the bottom of the stack,
+                                           the top of the stack is always found in the
+                                           esp register.  */
+        long int signal;                /* Signal that caused the core dump. */
+        int reserved;                   /* No longer used */
+        struct user_pt_regs *u_ar0;     /* Used by gdb to help find the values for */
+        /* the registers */
+        unsigned long magic;            /* To uniquely identify a core file */
+        char u_comm[32];                /* User command that was responsible */
+};
+#endif
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR    +(u.start_code)
+#define HOST_STACK_END_ADDR     +(u.start_stack + u.u_ssize * NBPG)
+#endif /* _ASM_USER_H */
diff --git a/arch/mn10300/include/asm/vga.h b/arch/mn10300/include/asm/vga.h
new file mode 100644
index 000000000000..0163e50a3459
--- /dev/null
+++ b/arch/mn10300/include/asm/vga.h
@@ -0,0 +1,17 @@
+/* MN10300 VGA register definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_VGA_H
+#define _ASM_VGA_H
+#endif /* _ASM_VGA_H */
diff --git a/arch/mn10300/include/asm/xor.h b/arch/mn10300/include/asm/xor.h
new file mode 100644
index 000000000000..c82eb12a5b18
--- /dev/null
+++ b/arch/mn10300/include/asm/xor.h
@@ -0,0 +1 @@
+#include <asm-generic/xor.h>