1 files changed, 1 insertions, 104 deletions

diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c
index 7cd36e631f6c..8a222b3eba32 100644
--- a/arch/mips/alchemy/devboards/db1x00/board_setup.c
+++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c
@@ -40,64 +40,10 @@
 
 #include <prom.h>
 
-#ifdef CONFIG_MIPS_BOSPORUS
-char irq_tab_alchemy[][5] __initdata = {
-        [11] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 11 - miniPCI  */
-        [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - SN1741   */
-        [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */
-};
-
-/*
- * Micrel/Kendin 5 port switch attached to MAC0,
- * MAC0 is associated with PHY address 5 (== WAN port)
- * MAC1 is not associated with any PHY, since it's connected directly
- * to the switch.
- * no interrupts are used
- */
-static struct au1000_eth_platform_data eth0_pdata = {
-        .phy_static_config      = 1,
-        .phy_addr               = 5,
-};
-
-static void bosporus_power_off(void)
-{
-        while (1)
-                asm volatile (".set mips3 ; wait ; .set mips0");
-}
-
-const char *get_system_type(void)
-{
-        return "Alchemy Bosporus Gateway Reference";
-}
-#endif
-
-
-#ifdef CONFIG_MIPS_MIRAGE
-static void mirage_power_off(void)
-{
-        alchemy_gpio_direction_output(210, 1);
-}
-
-const char *get_system_type(void)
-{
-        return "Alchemy Mirage";
-}
-#endif
-
-
-#if defined(CONFIG_MIPS_BOSPORUS) || defined(CONFIG_MIPS_MIRAGE)
-static void mips_softreset(void)
-{
-        asm volatile ("jr\t%0" : : "r"(0xbfc00000));
-}
-
-#else
-
 const char *get_system_type(void)
 {
         return "Alchemy Db1x00";
 }
-#endif
 
 
 void __init board_setup(void)
@@ -116,14 +62,6 @@ void __init board_setup(void)
 #ifdef CONFIG_MIPS_DB1100
         printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n");
 #endif
-#ifdef CONFIG_MIPS_BOSPORUS
-        au1xxx_override_eth_cfg(0, &eth0_pdata);
-
-        printk(KERN_INFO "AMD Alchemy Bosporus Board\n");
-#endif
-#ifdef CONFIG_MIPS_MIRAGE
-        printk(KERN_INFO "AMD Alchemy Mirage Board\n");
-#endif
 #ifdef CONFIG_MIPS_DB1550
         printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n");
 
@@ -150,52 +88,11 @@ void __init board_setup(void)
 
         /* Enable GPIO[31:0] inputs */
         alchemy_gpio1_input_enable();
-
-#ifdef CONFIG_MIPS_MIRAGE
-        {
-                u32 pin_func;
-
-                /* GPIO[20] is output */
-                alchemy_gpio_direction_output(20, 0);
-
-                /* Set GPIO[210:208] instead of SSI_0 */
-                pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0;
-
-                /* Set GPIO[215:211] for LEDs */
-                pin_func |= 5 << 2;
-
-                /* Set GPIO[214:213] for more LEDs */
-                pin_func |= 5 << 12;
-
-                /* Set GPIO[207:200] instead of PCMCIA/LCD */
-                pin_func |= SYS_PF_LCD | SYS_PF_PC;
-                au_writel(pin_func, SYS_PINFUNC);
-
-                /*
-                 * Enable speaker amplifier.  This should
-                 * be part of the audio driver.
-                 */
-                alchemy_gpio_direction_output(209, 1);
-
-                pm_power_off = mirage_power_off;
-                _machine_halt = mirage_power_off;
-                _machine_restart = (void(*)(char *))mips_softreset;
-        }
-#endif
-
-#ifdef CONFIG_MIPS_BOSPORUS
-        pm_power_off = bosporus_power_off;
-        _machine_halt = bosporus_power_off;
-        _machine_restart = (void(*)(char *))mips_softreset;
-#endif
-        au_sync();
 }
 
 static int __init db1x00_init_irq(void)
 {
-#if defined(CONFIG_MIPS_MIRAGE)
-        irq_set_irq_type(AU1500_GPIO7_INT, IRQF_TRIGGER_RISING); /* TS pendown */
-#elif defined(CONFIG_MIPS_DB1550)
+#if defined(CONFIG_MIPS_DB1550)
         irq_set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW);  /* CD0# */
         irq_set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW);  /* CD1# */
         irq_set_irq_type(AU1550_GPIO3_INT, IRQF_TRIGGER_LOW);  /* CARD0# */