1 files changed, 118 insertions, 0 deletions

diff --git a/arch/m68k/include/asm/mcfwdebug.h b/arch/m68k/include/asm/mcfwdebug.h
new file mode 100644
index 000000000000..27f70e45d700
--- /dev/null
+++ b/arch/m68k/include/asm/mcfwdebug.h
@@ -0,0 +1,118 @@
+/****************************************************************************/
+
+/*
+ *      mcfdebug.h -- ColdFire Debug Module support.
+ *
+ *      (C) Copyright 2001, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef mcfdebug_h
+#define mcfdebug_h
+/****************************************************************************/
+
+/* Define the debug module registers */
+#define MCFDEBUG_CSR    0x0                     /* Configuration status         */
+#define MCFDEBUG_BAAR   0x5                     /* BDM address attribute        */
+#define MCFDEBUG_AATR   0x6                     /* Address attribute trigger    */
+#define MCFDEBUG_TDR    0x7                     /* Trigger definition           */
+#define MCFDEBUG_PBR    0x8                     /* PC breakpoint                */
+#define MCFDEBUG_PBMR   0x9                     /* PC breakpoint mask           */
+#define MCFDEBUG_ABHR   0xc                     /* High address breakpoint      */
+#define MCFDEBUG_ABLR   0xd                     /* Low address breakpoint       */
+#define MCFDEBUG_DBR    0xe                     /* Data breakpoint              */
+#define MCFDEBUG_DBMR   0xf                     /* Data breakpoint mask         */
+
+/* Define some handy constants for the trigger definition register */
+#define MCFDEBUG_TDR_TRC_DISP   0x00000000      /* display on DDATA only        */
+#define MCFDEBUG_TDR_TRC_HALT   0x40000000      /* Processor halt on BP         */
+#define MCFDEBUG_TDR_TRC_INTR   0x80000000      /* Debug intr on BP             */
+#define MCFDEBUG_TDR_LXT1       0x00004000      /* TDR level 1                  */
+#define MCFDEBUG_TDR_LXT2       0x00008000      /* TDR level 2                  */
+#define MCFDEBUG_TDR_EBL1       0x00002000      /* Enable breakpoint level 1    */
+#define MCFDEBUG_TDR_EBL2       0x20000000      /* Enable breakpoint level 2    */
+#define MCFDEBUG_TDR_EDLW1      0x00001000      /* Enable data BP longword      */
+#define MCFDEBUG_TDR_EDLW2      0x10000000
+#define MCFDEBUG_TDR_EDWL1      0x00000800      /* Enable data BP lower word    */
+#define MCFDEBUG_TDR_EDWL2      0x08000000
+#define MCFDEBUG_TDR_EDWU1      0x00000400      /* Enable data BP upper word    */
+#define MCFDEBUG_TDR_EDWU2      0x04000000
+#define MCFDEBUG_TDR_EDLL1      0x00000200      /* Enable data BP low low byte  */
+#define MCFDEBUG_TDR_EDLL2      0x02000000
+#define MCFDEBUG_TDR_EDLM1      0x00000100      /* Enable data BP low mid byte  */
+#define MCFDEBUG_TDR_EDLM2      0x01000000
+#define MCFDEBUG_TDR_EDUM1      0x00000080      /* Enable data BP up mid byte   */
+#define MCFDEBUG_TDR_EDUM2      0x00800000
+#define MCFDEBUG_TDR_EDUU1      0x00000040      /* Enable data BP up up byte    */
+#define MCFDEBUG_TDR_EDUU2      0x00400000
+#define MCFDEBUG_TDR_DI1        0x00000020      /* Data BP invert               */
+#define MCFDEBUG_TDR_DI2        0x00200000
+#define MCFDEBUG_TDR_EAI1       0x00000010      /* Enable address BP inverted   */
+#define MCFDEBUG_TDR_EAI2       0x00100000
+#define MCFDEBUG_TDR_EAR1       0x00000008      /* Enable address BP range      */
+#define MCFDEBUG_TDR_EAR2       0x00080000
+#define MCFDEBUG_TDR_EAL1       0x00000004      /* Enable address BP low        */
+#define MCFDEBUG_TDR_EAL2       0x00040000
+#define MCFDEBUG_TDR_EPC1       0x00000002      /* Enable PC BP                 */
+#define MCFDEBUG_TDR_EPC2       0x00020000
+#define MCFDEBUG_TDR_PCI1       0x00000001      /* PC BP invert                 */
+#define MCFDEBUG_TDR_PCI2       0x00010000
+
+/* Constants for the address attribute trigger register */
+#define MCFDEBUG_AAR_RESET      0x00000005
+/* Fields not yet implemented */
+
+/* And some definitions for the writable sections of the CSR */
+#define MCFDEBUG_CSR_RESET      0x00100000
+#define MCFDEBUG_CSR_PSTCLK     0x00020000      /* PSTCLK disable               */
+#define MCFDEBUG_CSR_IPW        0x00010000      /* Inhibit processor writes     */
+#define MCFDEBUG_CSR_MAP        0x00008000      /* Processor refs in emul mode  */
+#define MCFDEBUG_CSR_TRC        0x00004000      /* Emul mode on trace exception */
+#define MCFDEBUG_CSR_EMU        0x00002000      /* Force emulation mode         */
+#define MCFDEBUG_CSR_DDC_READ   0x00000800      /* Debug data control           */
+#define MCFDEBUG_CSR_DDC_WRITE  0x00001000
+#define MCFDEBUG_CSR_UHE        0x00000400      /* User mode halt enable        */
+#define MCFDEBUG_CSR_BTB0       0x00000000      /* Branch target 0 bytes        */
+#define MCFDEBUG_CSR_BTB2       0x00000100      /* Branch target 2 bytes        */
+#define MCFDEBUG_CSR_BTB3       0x00000200      /* Branch target 3 bytes        */
+#define MCFDEBUG_CSR_BTB4       0x00000300      /* Branch target 4 bytes        */
+#define MCFDEBUG_CSR_NPL        0x00000040      /* Non-pipelined mode           */
+#define MCFDEBUG_CSR_SSM        0x00000010      /* Single step mode             */
+
+/* Constants for the BDM address attribute register */
+#define MCFDEBUG_BAAR_RESET     0x00000005
+/* Fields not yet implemented */
+
+
+/* This routine wrappers up the wdebug asm instruction so that the register
+ * and value can be relatively easily specified.  The biggest hassle here is
+ * that the debug module instructions (2 longs) must be long word aligned and
+ * some pointer fiddling is performed to ensure this.
+ */
+static inline void wdebug(int reg, unsigned long data) {
+        unsigned short dbg_spc[6];
+        unsigned short *dbg;
+
+        // Force alignment to long word boundary
+        dbg = (unsigned short *)((((unsigned long)dbg_spc) + 3) & 0xfffffffc);
+
+        // Build up the debug instruction
+        dbg[0] = 0x2c80 | (reg & 0xf);
+        dbg[1] = (data >> 16) & 0xffff;
+        dbg[2] = data & 0xffff;
+        dbg[3] = 0;
+
+        // Perform the wdebug instruction
+#if 0
+        // This strain is for gas which doesn't have the wdebug instructions defined
+        asm(    "move.l %0, %%a0\n\t"
+                ".word  0xfbd0\n\t"
+                ".word  0x0003\n\t"
+            :: "g" (dbg) : "a0");
+#else
+        // And this is for when it does
+        asm(    "wdebug (%0)" :: "a" (dbg));
+#endif
+}
+
+#endif