1 files changed, 249 insertions, 0 deletions

diff --git a/arch/m32r/platforms/m32700ut/dot.gdbinit_200MHz_16MB b/arch/m32r/platforms/m32700ut/dot.gdbinit_200MHz_16MB
new file mode 100644
index 000000000000..525dab46982b
--- /dev/null
+++ b/arch/m32r/platforms/m32700ut/dot.gdbinit_200MHz_16MB
@@ -0,0 +1,249 @@
+# .gdbinit file
+# $Id: dot.gdbinit_200MHz_16MB,v 1.2 2004/10/20 03:02:27 fujiwara Exp $
+#-----
+# NOTE: this file is generated by a script, "gen_gdbinit.pl".
+# (Please type "gen_gdbinit.pl --help" and check the help message).
+# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $
+#-----
+# target platform: m32700ut
+
+# setting
+set width 0d70
+set radix 0d16
+
+debug_chaos
+
+# clk xin:cpu:bif:bus=25:200:50:50
+define clock_init
+  set *(unsigned long *)0x00ef4008 = 0x00000000
+  set *(unsigned long *)0x00ef4004 = 0
+  shell sleep 0.1
+  # NOTE: Please change the master clock source from PLL-clock to Xin-clock
+  # and switch off PLL, before resetting the clock gear ratio.
+
+  set *(unsigned long *)0x00ef4024 = 2
+  set *(unsigned long *)0x00ef4020 = 2
+  set *(unsigned long *)0x00ef4010 = 0
+  set *(unsigned long *)0x00ef4014 = 0
+  set *(unsigned long *)0x00ef4004 = 3
+  shell sleep 0.1
+  set *(unsigned long *)0x00ef4008 = 0x00000200
+end
+
+# Initialize SDRAM controller
+define sdram_init
+  # SDIR0
+  set *(unsigned long *)0x00ef6008 = 0x00000182
+  # SDIR1
+  set *(unsigned long *)0x00ef600c = 0x00000001
+  # Initialize wait
+  shell sleep 0.1
+  # Ch0-MOD
+  set *(unsigned long *)0x00ef602c = 0x00000020
+  # Ch0-TR
+  set *(unsigned long *)0x00ef6028 = 0x00041302
+  # Ch0-ADR (size:16MB)
+  set *(unsigned long *)0x00ef6020 = 0x08000002
+  # AutoRef On
+  set *(unsigned long *)0x00ef6004 = 0x00010517
+  # Access enable
+  set *(unsigned long *)0x00ef6024 = 0x00000001
+end
+document sdram_init
+  SDRAM controller initialization
+  0x08000000 - 0x08ffffff (16MB)
+end
+
+# Initialize BSEL3 for UT-CFC
+define cfc_init
+  set $sfrbase = 0xa0ef0000
+# too fast
+#  set *(unsigned long *)($sfrbase + 0x5300) = 0x0b0b8000
+#  set *(unsigned long *)($sfrbase + 0x5304) = 0x00102204
+#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f8000
+#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f1fdf
+#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013220f
+#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013330f
+end
+document cfc_init
+  CF controller initialization
+end
+
+# MMU enable
+define mmu_enable
+  set $evb=0x88000000
+  set *(unsigned long *)0xffff0024=1
+end
+
+# MMU disable
+define mmu_disable
+  set $evb=0
+  set *(unsigned long *)0xffff0024=0
+end
+
+# Show TLB entries
+define show_tlb_entries
+  set $i = 0
+  set $addr = $arg0
+  set $nr_entries = $arg1
+  use_mon_code
+  while ($i < $nr_entries)
+    set $tlb_tag = *(unsigned long*)$addr
+    set $tlb_data = *(unsigned long*)($addr + 4)
+    printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data
+    set $i = $i + 1
+    set $addr = $addr + 8
+  end
+  use_debug_dma
+end
+define itlb
+  set $itlb=0xfe000000
+  show_tlb_entries $itlb 0d32
+end
+define dtlb
+  set $dtlb=0xfe000800
+  show_tlb_entries $dtlb 0d32
+end
+
+# Initialize TLB entries
+define init_tlb_entries
+  set $i = 0
+  set $addr = $arg0
+  set $nr_entries = $arg1
+  use_mon_code
+  while ($i < $nr_entries)
+    set *(unsigned long *)($addr + 0x4) = 0
+    set $i = $i + 1
+    set $addr = $addr + 8
+  end
+  use_debug_dma
+end
+define tlb_init
+  set $itlb=0xfe000000
+  init_tlb_entries $itlb 0d32
+  set $dtlb=0xfe000800
+  init_tlb_entries $dtlb 0d32
+end
+
+# Show current task structure
+define show_current
+  set $current = $spi & 0xffffe000
+  printf "$current=0x%08lX\n",$current
+  print *(struct task_struct *)$current
+end
+
+# Show user assigned task structure
+define show_task
+  set  = $arg0 & 0xffffe000
+  printf "$task=0x%08lX\n",$task
+  print *(struct task_struct *)$task
+end
+document show_task
+  Show user assigned task structure
+  arg0 : task structure address
+end
+
+# Show M32R registers
+define show_regs
+  printf " R0[0x%08lX]   R1[0x%08lX]   R2[0x%08lX]   R3[0x%08lX]\n",$r0,$r1,$r2,$r3
+  printf " R4[0x%08lX]   R5[0x%08lX]   R6[0x%08lX]   R7[0x%08lX]\n",$r4,$r5,$r6,$r7
+  printf " R8[0x%08lX]   R9[0x%08lX]  R10[0x%08lX]  R11[0x%08lX]\n",$r8,$r9,$r10,$r11
+  printf "R12[0x%08lX]   FP[0x%08lX]   LR[0x%08lX]   SP[0x%08lX]\n",$r12,$fp,$lr,$sp
+  printf "PSW[0x%08lX]  CBR[0x%08lX]  SPI[0x%08lX]  SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu
+  printf "BPC[0x%08lX]   PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch
+  printf "EVB[0x%08lX]\n",$evb
+end
+
+# Setup all
+define setup
+  use_mon_code
+  set *(unsigned int)0xfffffffc=0x60
+  shell sleep 0.1
+  clock_init
+  shell sleep 0.1
+  # SDRAM: 16MB
+  set *(unsigned long *)0x00ef6020 = 0x08000002
+  cfc_init
+  # USB
+  set *(unsigned short *)0xb0301000 = 0x100
+
+  set $evb=0x08000000
+end
+
+# Load modules
+define load_modules
+  use_debug_dma
+  load
+end
+
+# Set kernel parameters
+define set_kernel_parameters
+  set $param = (void*)0x08001000
+  # INITRD_START
+#  set *(unsigned long *)($param + 0x0010) = 0x08300000
+  # INITRD_SIZE
+#  set *(unsigned long *)($param + 0x0014) = 0x00000000
+  # M32R_CPUCLK
+  set *(unsigned long *)($param + 0x0018) = 0d200000000
+  # M32R_BUSCLK
+  set *(unsigned long *)($param + 0x001c) = 0d50000000
+
+  # M32R_TIMER_DIVIDE
+  set *(unsigned long *)($param + 0x0020) = 0d128
+
+  set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs,rsize=1024,wsize=1024 nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 mem=16M \0"
+end
+
+# Boot
+define boot
+  set_kernel_parameters
+  set $fp = 0
+  set $pc = 0x08002000
+# set *(unsigned char *)0xffffffff = 0x03
+  si
+  c
+end
+
+# Set breakpoints
+define set_breakpoints
+  b *0x08000030
+end
+
+# Restart
+define restart
+  sdireset
+  sdireset
+  set $pc = 0
+  b *0x04001000
+  b *0x08001000
+  b *0x08002000
+  si
+  c
+  tlb_init
+  del
+  setup
+  load_modules
+  boot
+end
+
+define si
+  stepi
+  x/i $pc
+  show_reg
+end
+
+sdireset
+sdireset
+file vmlinux
+target m32rsdi
+set $pc = 0
+b *0x04001000
+b *0x08001000
+b *0x08002000
+c
+tlb_init
+del
+setup
+load_modules
+boot
+