54 files changed, 14684 insertions, 0 deletions

diff --git a/arch/i386/kernel/cpu/Makefile b/arch/i386/kernel/cpu/Makefile
new file mode 100644
index 000000000000..010aecfffbc1
--- /dev/null
+++ b/arch/i386/kernel/cpu/Makefile
@@ -0,0 +1,19 @@
+#
+# Makefile for x86-compatible CPU details and quirks
+#
+
+obj-y   :=      common.o proc.o
+
+obj-y   +=      amd.o
+obj-y   +=      cyrix.o
+obj-y   +=      centaur.o
+obj-y   +=      transmeta.o
+obj-y   +=      intel.o intel_cacheinfo.o
+obj-y   +=      rise.o
+obj-y   +=      nexgen.o
+obj-y   +=      umc.o
+
+obj-$(CONFIG_X86_MCE)   +=      mcheck/
+
+obj-$(CONFIG_MTRR)      +=      mtrr/
+obj-$(CONFIG_CPU_FREQ)  +=      cpufreq/
diff --git a/arch/i386/kernel/cpu/amd.c b/arch/i386/kernel/cpu/amd.c
new file mode 100644
index 000000000000..ae94585d0445
--- /dev/null
+++ b/arch/i386/kernel/cpu/amd.c
@@ -0,0 +1,249 @@
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/mm.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+#include "cpu.h"
+
+/*
+ *      B step AMD K6 before B 9730xxxx have hardware bugs that can cause
+ *      misexecution of code under Linux. Owners of such processors should
+ *      contact AMD for precise details and a CPU swap.
+ *
+ *      See     http://www.multimania.com/poulot/k6bug.html
+ *              http://www.amd.com/K6/k6docs/revgd.html
+ *
+ *      The following test is erm.. interesting. AMD neglected to up
+ *      the chip setting when fixing the bug but they also tweaked some
+ *      performance at the same time..
+ */
+ 
+extern void vide(void);
+__asm__(".align 4\nvide: ret");
+
+static void __init init_amd(struct cpuinfo_x86 *c)
+{
+        u32 l, h;
+        int mbytes = num_physpages >> (20-PAGE_SHIFT);
+        int r;
+
+        /*
+         *      FIXME: We should handle the K5 here. Set up the write
+         *      range and also turn on MSR 83 bits 4 and 31 (write alloc,
+         *      no bus pipeline)
+         */
+
+        /* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
+           3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
+        clear_bit(0*32+31, c->x86_capability);
+        
+        r = get_model_name(c);
+
+        switch(c->x86)
+        {
+                case 4:
+                /*
+                 * General Systems BIOSen alias the cpu frequency registers
+                 * of the Elan at 0x000df000. Unfortuantly, one of the Linux
+                 * drivers subsequently pokes it, and changes the CPU speed.
+                 * Workaround : Remove the unneeded alias.
+                 */
+#define CBAR            (0xfffc) /* Configuration Base Address  (32-bit) */
+#define CBAR_ENB        (0x80000000)
+#define CBAR_KEY        (0X000000CB)
+                        if (c->x86_model==9 || c->x86_model == 10) {
+                                if (inl (CBAR) & CBAR_ENB)
+                                        outl (0 | CBAR_KEY, CBAR);
+                        }
+                        break;
+                case 5:
+                        if( c->x86_model < 6 )
+                        {
+                                /* Based on AMD doc 20734R - June 2000 */
+                                if ( c->x86_model == 0 ) {
+                                        clear_bit(X86_FEATURE_APIC, c->x86_capability);
+                                        set_bit(X86_FEATURE_PGE, c->x86_capability);
+                                }
+                                break;
+                        }
+                        
+                        if ( c->x86_model == 6 && c->x86_mask == 1 ) {
+                                const int K6_BUG_LOOP = 1000000;
+                                int n;
+                                void (*f_vide)(void);
+                                unsigned long d, d2;
+                                
+                                printk(KERN_INFO "AMD K6 stepping B detected - ");
+                                
+                                /*
+                                 * It looks like AMD fixed the 2.6.2 bug and improved indirect 
+                                 * calls at the same time.
+                                 */
+
+                                n = K6_BUG_LOOP;
+                                f_vide = vide;
+                                rdtscl(d);
+                                while (n--) 
+                                        f_vide();
+                                rdtscl(d2);
+                                d = d2-d;
+                                
+                                /* Knock these two lines out if it debugs out ok */
+                                printk(KERN_INFO "AMD K6 stepping B detected - ");
+                                /* -- cut here -- */
+                                if (d > 20*K6_BUG_LOOP) 
+                                        printk("system stability may be impaired when more than 32 MB are used.\n");
+                                else 
+                                        printk("probably OK (after B9730xxxx).\n");
+                                printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n");
+                        }
+
+                        /* K6 with old style WHCR */
+                        if (c->x86_model < 8 ||
+                           (c->x86_model== 8 && c->x86_mask < 8)) {
+                                /* We can only write allocate on the low 508Mb */
+                                if(mbytes>508)
+                                        mbytes=508;
+
+                                rdmsr(MSR_K6_WHCR, l, h);
+                                if ((l&0x0000FFFF)==0) {
+                                        unsigned long flags;
+                                        l=(1<<0)|((mbytes/4)<<1);
+                                        local_irq_save(flags);
+                                        wbinvd();
+                                        wrmsr(MSR_K6_WHCR, l, h);
+                                        local_irq_restore(flags);
+                                        printk(KERN_INFO "Enabling old style K6 write allocation for %d Mb\n",
+                                                mbytes);
+                                }
+                                break;
+                        }
+
+                        if ((c->x86_model == 8 && c->x86_mask >7) ||
+                             c->x86_model == 9 || c->x86_model == 13) {
+                                /* The more serious chips .. */
+
+                                if(mbytes>4092)
+                                        mbytes=4092;
+
+                                rdmsr(MSR_K6_WHCR, l, h);
+                                if ((l&0xFFFF0000)==0) {
+                                        unsigned long flags;
+                                        l=((mbytes>>2)<<22)|(1<<16);
+                                        local_irq_save(flags);
+                                        wbinvd();
+                                        wrmsr(MSR_K6_WHCR, l, h);
+                                        local_irq_restore(flags);
+                                        printk(KERN_INFO "Enabling new style K6 write allocation for %d Mb\n",
+                                                mbytes);
+                                }
+
+                                /*  Set MTRR capability flag if appropriate */
+                                if (c->x86_model == 13 || c->x86_model == 9 ||
+                                   (c->x86_model == 8 && c->x86_mask >= 8))
+                                        set_bit(X86_FEATURE_K6_MTRR, c->x86_capability);
+                                break;
+                        }
+                        break;
+
+                case 6: /* An Athlon/Duron */
+ 
+                        /* Bit 15 of Athlon specific MSR 15, needs to be 0
+                         * to enable SSE on Palomino/Morgan/Barton CPU's.
+                         * If the BIOS didn't enable it already, enable it here.
+                         */
+                        if (c->x86_model >= 6 && c->x86_model <= 10) {
+                                if (!cpu_has(c, X86_FEATURE_XMM)) {
+                                        printk(KERN_INFO "Enabling disabled K7/SSE Support.\n");
+                                        rdmsr(MSR_K7_HWCR, l, h);
+                                        l &= ~0x00008000;
+                                        wrmsr(MSR_K7_HWCR, l, h);
+                                        set_bit(X86_FEATURE_XMM, c->x86_capability);
+                                }
+                        }
+
+                        /* It's been determined by AMD that Athlons since model 8 stepping 1
+                         * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx
+                         * As per AMD technical note 27212 0.2
+                         */
+                        if ((c->x86_model == 8 && c->x86_mask>=1) || (c->x86_model > 8)) {
+                                rdmsr(MSR_K7_CLK_CTL, l, h);
+                                if ((l & 0xfff00000) != 0x20000000) {
+                                        printk ("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", l,
+                                                ((l & 0x000fffff)|0x20000000));
+                                        wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h);
+                                }
+                        }
+                        break;
+        }
+
+        switch (c->x86) {
+        case 15:
+                set_bit(X86_FEATURE_K8, c->x86_capability);
+                break;
+        case 6:
+                set_bit(X86_FEATURE_K7, c->x86_capability); 
+                break;
+        }
+
+        display_cacheinfo(c);
+        detect_ht(c);
+
+#ifdef CONFIG_X86_HT
+        /* AMD dual core looks like HT but isn't really. Hide it from the
+           scheduler. This works around problems with the domain scheduler.
+           Also probably gives slightly better scheduling and disables
+           SMT nice which is harmful on dual core.
+           TBD tune the domain scheduler for dual core. */
+        if (cpu_has(c, X86_FEATURE_CMP_LEGACY))
+                smp_num_siblings = 1;
+#endif
+
+        if (cpuid_eax(0x80000000) >= 0x80000008) {
+                c->x86_num_cores = (cpuid_ecx(0x80000008) & 0xff) + 1;
+                if (c->x86_num_cores & (c->x86_num_cores - 1))
+                        c->x86_num_cores = 1;
+        }
+}
+
+static unsigned int amd_size_cache(struct cpuinfo_x86 * c, unsigned int size)
+{
+        /* AMD errata T13 (order #21922) */
+        if ((c->x86 == 6)) {
+                if (c->x86_model == 3 && c->x86_mask == 0)      /* Duron Rev A0 */
+                        size = 64;
+                if (c->x86_model == 4 &&
+                    (c->x86_mask==0 || c->x86_mask==1)) /* Tbird rev A1/A2 */
+                        size = 256;
+        }
+        return size;
+}
+
+static struct cpu_dev amd_cpu_dev __initdata = {
+        .c_vendor       = "AMD",
+        .c_ident        = { "AuthenticAMD" },
+        .c_models = {
+                { .vendor = X86_VENDOR_AMD, .family = 4, .model_names =
+                  {
+                          [3] = "486 DX/2",
+                          [7] = "486 DX/2-WB",
+                          [8] = "486 DX/4", 
+                          [9] = "486 DX/4-WB", 
+                          [14] = "Am5x86-WT",
+                          [15] = "Am5x86-WB" 
+                  }
+                },
+        },
+        .c_init         = init_amd,
+        .c_identify     = generic_identify,
+        .c_size_cache   = amd_size_cache,
+};
+
+int __init amd_init_cpu(void)
+{
+        cpu_devs[X86_VENDOR_AMD] = &amd_cpu_dev;
+        return 0;
+}
+
+//early_arch_initcall(amd_init_cpu);
diff --git a/arch/i386/kernel/cpu/centaur.c b/arch/i386/kernel/cpu/centaur.c
new file mode 100644
index 000000000000..394814e57672
--- /dev/null
+++ b/arch/i386/kernel/cpu/centaur.c
@@ -0,0 +1,476 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <asm/processor.h>
+#include <asm/msr.h>
+#include <asm/e820.h>
+#include "cpu.h"
+
+#ifdef CONFIG_X86_OOSTORE
+
+static u32 __init power2(u32 x)
+{
+        u32 s=1;
+        while(s<=x)
+                s<<=1;
+        return s>>=1;
+}
+
+
+/*
+ *      Set up an actual MCR
+ */
+ 
+static void __init centaur_mcr_insert(int reg, u32 base, u32 size, int key)
+{
+        u32 lo, hi;
+        
+        hi = base & ~0xFFF;
+        lo = ~(size-1);         /* Size is a power of 2 so this makes a mask */
+        lo &= ~0xFFF;           /* Remove the ctrl value bits */
+        lo |= key;              /* Attribute we wish to set */
+        wrmsr(reg+MSR_IDT_MCR0, lo, hi);
+        mtrr_centaur_report_mcr(reg, lo, hi);   /* Tell the mtrr driver */
+}
+
+/*
+ *      Figure what we can cover with MCR's
+ *
+ *      Shortcut: We know you can't put 4Gig of RAM on a winchip
+ */
+
+static u32 __init ramtop(void)          /* 16388 */
+{
+        int i;
+        u32 top = 0;
+        u32 clip = 0xFFFFFFFFUL;
+        
+        for (i = 0; i < e820.nr_map; i++) {
+                unsigned long start, end;
+
+                if (e820.map[i].addr > 0xFFFFFFFFUL)
+                        continue;
+                /*
+                 *      Don't MCR over reserved space. Ignore the ISA hole
+                 *      we frob around that catastrophy already
+                 */
+                                        
+                if (e820.map[i].type == E820_RESERVED)
+                {
+                        if(e820.map[i].addr >= 0x100000UL && e820.map[i].addr < clip)
+                                clip = e820.map[i].addr;
+                        continue;
+                }
+                start = e820.map[i].addr;
+                end = e820.map[i].addr + e820.map[i].size;
+                if (start >= end)
+                        continue;
+                if (end > top)
+                        top = end;
+        }
+        /* Everything below 'top' should be RAM except for the ISA hole.
+           Because of the limited MCR's we want to map NV/ACPI into our
+           MCR range for gunk in RAM 
+           
+           Clip might cause us to MCR insufficient RAM but that is an
+           acceptable failure mode and should only bite obscure boxes with
+           a VESA hole at 15Mb
+           
+           The second case Clip sometimes kicks in is when the EBDA is marked
+           as reserved. Again we fail safe with reasonable results
+        */
+        
+        if(top>clip)
+                top=clip;
+                
+        return top;
+}
+
+/*
+ *      Compute a set of MCR's to give maximum coverage
+ */
+
+static int __init centaur_mcr_compute(int nr, int key)
+{
+        u32 mem = ramtop();
+        u32 root = power2(mem);
+        u32 base = root;
+        u32 top = root;
+        u32 floor = 0;
+        int ct = 0;
+        
+        while(ct<nr)
+        {
+                u32 fspace = 0;
+
+                /*
+                 *      Find the largest block we will fill going upwards
+                 */
+
+                u32 high = power2(mem-top);     
+
+                /*
+                 *      Find the largest block we will fill going downwards
+                 */
+
+                u32 low = base/2;
+
+                /*
+                 *      Don't fill below 1Mb going downwards as there
+                 *      is an ISA hole in the way.
+                 */             
+                 
+                if(base <= 1024*1024)
+                        low = 0;
+                        
+                /*
+                 *      See how much space we could cover by filling below
+                 *      the ISA hole
+                 */
+                 
+                if(floor == 0)
+                        fspace = 512*1024;
+                else if(floor ==512*1024)
+                        fspace = 128*1024;
+
+                /* And forget ROM space */
+                
+                /*
+                 *      Now install the largest coverage we get
+                 */
+                 
+                if(fspace > high && fspace > low)
+                {
+                        centaur_mcr_insert(ct, floor, fspace, key);
+                        floor += fspace;
+                }
+                else if(high > low)
+                {
+                        centaur_mcr_insert(ct, top, high, key);
+                        top += high;
+                }
+                else if(low > 0)
+                {
+                        base -= low;
+                        centaur_mcr_insert(ct, base, low, key);
+                }
+                else break;
+                ct++;
+        }
+        /*
+         *      We loaded ct values. We now need to set the mask. The caller
+         *      must do this bit.
+         */
+         
+        return ct;
+}
+
+static void __init centaur_create_optimal_mcr(void)
+{
+        int i;
+        /*
+         *      Allocate up to 6 mcrs to mark as much of ram as possible
+         *      as write combining and weak write ordered.
+         *
+         *      To experiment with: Linux never uses stack operations for 
+         *      mmio spaces so we could globally enable stack operation wc
+         *
+         *      Load the registers with type 31 - full write combining, all
+         *      writes weakly ordered.
+         */
+        int used = centaur_mcr_compute(6, 31);
+
+        /*
+         *      Wipe unused MCRs
+         */
+         
+        for(i=used;i<8;i++)
+                wrmsr(MSR_IDT_MCR0+i, 0, 0);
+}
+
+static void __init winchip2_create_optimal_mcr(void)
+{
+        u32 lo, hi;
+        int i;
+
+        /*
+         *      Allocate up to 6 mcrs to mark as much of ram as possible
+         *      as write combining, weak store ordered.
+         *
+         *      Load the registers with type 25
+         *              8       -       weak write ordering
+         *              16      -       weak read ordering
+         *              1       -       write combining
+         */
+
+        int used = centaur_mcr_compute(6, 25);
+        
+        /*
+         *      Mark the registers we are using.
+         */
+         
+        rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+        for(i=0;i<used;i++)
+                lo|=1<<(9+i);
+        wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+        
+        /*
+         *      Wipe unused MCRs
+         */
+         
+        for(i=used;i<8;i++)
+                wrmsr(MSR_IDT_MCR0+i, 0, 0);
+}
+
+/*
+ *      Handle the MCR key on the Winchip 2.
+ */
+
+static void __init winchip2_unprotect_mcr(void)
+{
+        u32 lo, hi;
+        u32 key;
+        
+        rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+        lo&=~0x1C0;     /* blank bits 8-6 */
+        key = (lo>>17) & 7;
+        lo |= key<<6;   /* replace with unlock key */
+        wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+}
+
+static void __init winchip2_protect_mcr(void)
+{
+        u32 lo, hi;
+        
+        rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+        lo&=~0x1C0;     /* blank bits 8-6 */
+        wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+}
+#endif /* CONFIG_X86_OOSTORE */
+
+#define ACE_PRESENT     (1 << 6)
+#define ACE_ENABLED     (1 << 7)
+#define ACE_FCR         (1 << 28)       /* MSR_VIA_FCR */
+
+#define RNG_PRESENT     (1 << 2)
+#define RNG_ENABLED     (1 << 3)
+#define RNG_ENABLE      (1 << 6)        /* MSR_VIA_RNG */
+
+static void __init init_c3(struct cpuinfo_x86 *c)
+{
+        u32  lo, hi;
+
+        /* Test for Centaur Extended Feature Flags presence */
+        if (cpuid_eax(0xC0000000) >= 0xC0000001) {
+                u32 tmp = cpuid_edx(0xC0000001);
+
+                /* enable ACE unit, if present and disabled */
+                if ((tmp & (ACE_PRESENT | ACE_ENABLED)) == ACE_PRESENT) {
+                        rdmsr (MSR_VIA_FCR, lo, hi);
+                        lo |= ACE_FCR;          /* enable ACE unit */
+                        wrmsr (MSR_VIA_FCR, lo, hi);
+                        printk(KERN_INFO "CPU: Enabled ACE h/w crypto\n");
+                }
+
+                /* enable RNG unit, if present and disabled */
+                if ((tmp & (RNG_PRESENT | RNG_ENABLED)) == RNG_PRESENT) {
+                        rdmsr (MSR_VIA_RNG, lo, hi);
+                        lo |= RNG_ENABLE;       /* enable RNG unit */
+                        wrmsr (MSR_VIA_RNG, lo, hi);
+                        printk(KERN_INFO "CPU: Enabled h/w RNG\n");
+                }
+
+                /* store Centaur Extended Feature Flags as
+                 * word 5 of the CPU capability bit array
+                 */
+                c->x86_capability[5] = cpuid_edx(0xC0000001);
+        }
+
+        /* Cyrix III family needs CX8 & PGE explicity enabled. */
+        if (c->x86_model >=6 && c->x86_model <= 9) {
+                rdmsr (MSR_VIA_FCR, lo, hi);
+                lo |= (1<<1 | 1<<7);
+                wrmsr (MSR_VIA_FCR, lo, hi);
+                set_bit(X86_FEATURE_CX8, c->x86_capability);
+        }
+
+        /* Before Nehemiah, the C3's had 3dNOW! */
+        if (c->x86_model >=6 && c->x86_model <9)
+                set_bit(X86_FEATURE_3DNOW, c->x86_capability);
+
+        get_model_name(c);
+        display_cacheinfo(c);
+}
+
+static void __init init_centaur(struct cpuinfo_x86 *c)
+{
+        enum {
+                ECX8=1<<1,
+                EIERRINT=1<<2,
+                DPM=1<<3,
+                DMCE=1<<4,
+                DSTPCLK=1<<5,
+                ELINEAR=1<<6,
+                DSMC=1<<7,
+                DTLOCK=1<<8,
+                EDCTLB=1<<8,
+                EMMX=1<<9,
+                DPDC=1<<11,
+                EBRPRED=1<<12,
+                DIC=1<<13,
+                DDC=1<<14,
+                DNA=1<<15,
+                ERETSTK=1<<16,
+                E2MMX=1<<19,
+                EAMD3D=1<<20,
+        };
+
+        char *name;
+        u32  fcr_set=0;
+        u32  fcr_clr=0;
+        u32  lo,hi,newlo;
+        u32  aa,bb,cc,dd;
+
+        /* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
+           3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
+        clear_bit(0*32+31, c->x86_capability);
+
+        switch (c->x86) {
+
+                case 5:
+                        switch(c->x86_model) {
+                        case 4:
+                                name="C6";
+                                fcr_set=ECX8|DSMC|EDCTLB|EMMX|ERETSTK;
+                                fcr_clr=DPDC;
+                                printk(KERN_NOTICE "Disabling bugged TSC.\n");
+                                clear_bit(X86_FEATURE_TSC, c->x86_capability);
+#ifdef CONFIG_X86_OOSTORE
+                                centaur_create_optimal_mcr();
+                                /* Enable
+                                        write combining on non-stack, non-string
+                                        write combining on string, all types
+                                        weak write ordering 
+                                        
+                                   The C6 original lacks weak read order 
+                                   
+                                   Note 0x120 is write only on Winchip 1 */
+                                   
+                                wrmsr(MSR_IDT_MCR_CTRL, 0x01F0001F, 0);
+#endif                          
+                                break;
+                        case 8:
+                                switch(c->x86_mask) {
+                                default:
+                                        name="2";
+                                        break;
+                                case 7 ... 9:
+                                        name="2A";
+                                        break;
+                                case 10 ... 15:
+                                        name="2B";
+                                        break;
+                                }
+                                fcr_set=ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|E2MMX|EAMD3D;
+                                fcr_clr=DPDC;
+#ifdef CONFIG_X86_OOSTORE
+                                winchip2_unprotect_mcr();
+                                winchip2_create_optimal_mcr();
+                                rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+                                /* Enable
+                                        write combining on non-stack, non-string
+                                        write combining on string, all types
+                                        weak write ordering 
+                                */
+                                lo|=31;                         
+                                wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+                                winchip2_protect_mcr();
+#endif
+                                break;
+                        case 9:
+                                name="3";
+                                fcr_set=ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|E2MMX|EAMD3D;
+                                fcr_clr=DPDC;
+#ifdef CONFIG_X86_OOSTORE
+                                winchip2_unprotect_mcr();
+                                winchip2_create_optimal_mcr();
+                                rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+                                /* Enable
+                                        write combining on non-stack, non-string
+                                        write combining on string, all types
+                                        weak write ordering 
+                                */
+                                lo|=31;                         
+                                wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+                                winchip2_protect_mcr();
+#endif
+                                break;
+                        case 10:
+                                name="4";
+                                /* no info on the WC4 yet */
+                                break;
+                        default:
+                                name="??";
+                        }
+
+                        rdmsr(MSR_IDT_FCR1, lo, hi);
+                        newlo=(lo|fcr_set) & (~fcr_clr);
+
+                        if (newlo!=lo) {
+                                printk(KERN_INFO "Centaur FCR was 0x%X now 0x%X\n", lo, newlo );
+                                wrmsr(MSR_IDT_FCR1, newlo, hi );
+                        } else {
+                                printk(KERN_INFO "Centaur FCR is 0x%X\n",lo);
+                        }
+                        /* Emulate MTRRs using Centaur's MCR. */
+                        set_bit(X86_FEATURE_CENTAUR_MCR, c->x86_capability);
+                        /* Report CX8 */
+                        set_bit(X86_FEATURE_CX8, c->x86_capability);
+                        /* Set 3DNow! on Winchip 2 and above. */
+                        if (c->x86_model >=8)
+                                set_bit(X86_FEATURE_3DNOW, c->x86_capability);
+                        /* See if we can find out some more. */
+                        if ( cpuid_eax(0x80000000) >= 0x80000005 ) {
+                                /* Yes, we can. */
+                                cpuid(0x80000005,&aa,&bb,&cc,&dd);
+                                /* Add L1 data and code cache sizes. */
+                                c->x86_cache_size = (cc>>24)+(dd>>24);
+                        }
+                        sprintf( c->x86_model_id, "WinChip %s", name );
+                        break;
+
+                case 6:
+                        init_c3(c);
+                        break;
+        }
+}
+
+static unsigned int centaur_size_cache(struct cpuinfo_x86 * c, unsigned int size)
+{
+        /* VIA C3 CPUs (670-68F) need further shifting. */
+        if ((c->x86 == 6) && ((c->x86_model == 7) || (c->x86_model == 8)))
+                size >>= 8;
+
+        /* VIA also screwed up Nehemiah stepping 1, and made
+           it return '65KB' instead of '64KB'
+           - Note, it seems this may only be in engineering samples. */
+        if ((c->x86==6) && (c->x86_model==9) && (c->x86_mask==1) && (size==65))
+                size -=1;
+
+        return size;
+}
+
+static struct cpu_dev centaur_cpu_dev __initdata = {
+        .c_vendor       = "Centaur",
+        .c_ident        = { "CentaurHauls" },
+        .c_init         = init_centaur,
+        .c_size_cache   = centaur_size_cache,
+};
+
+int __init centaur_init_cpu(void)
+{
+        cpu_devs[X86_VENDOR_CENTAUR] = &centaur_cpu_dev;
+        return 0;
+}
+
+//early_arch_initcall(centaur_init_cpu);
diff --git a/arch/i386/kernel/cpu/changelog b/arch/i386/kernel/cpu/changelog
new file mode 100644
index 000000000000..cef76b80a710
--- /dev/null
+++ b/arch/i386/kernel/cpu/changelog
@@ -0,0 +1,63 @@
+/*
+ *  Enhanced CPU type detection by Mike Jagdis, Patrick St. Jean
+ *  and Martin Mares, November 1997.
+ *
+ *  Force Cyrix 6x86(MX) and M II processors to report MTRR capability
+ *  and Cyrix "coma bug" recognition by
+ *  Zoltán Böszörményi <zboszor@mail.externet.hu> February 1999.
+ * 
+ *  Force Centaur C6 processors to report MTRR capability.
+ *  Bart Hartgers <bart@etpmod.phys.tue.nl>, May 1999.
+ *
+ *  Intel Mobile Pentium II detection fix. Sean Gilley, June 1999.
+ *
+ *  IDT Winchip tweaks, misc clean ups.
+ *  Dave Jones <davej@suse.de>, August 1999
+ *
+ *  Better detection of Centaur/IDT WinChip models.
+ *  Bart Hartgers <bart@etpmod.phys.tue.nl>, August 1999.
+ *
+ *  Cleaned up cache-detection code
+ *  Dave Jones <davej@suse.de>, October 1999
+ *
+ *  Added proper L2 cache detection for Coppermine
+ *  Dragan Stancevic <visitor@valinux.com>, October 1999
+ *
+ *  Added the original array for capability flags but forgot to credit 
+ *  myself :) (~1998) Fixed/cleaned up some cpu_model_info and other stuff
+ *  Jauder Ho <jauderho@carumba.com>, January 2000
+ *
+ *  Detection for Celeron coppermine, identify_cpu() overhauled,
+ *  and a few other clean ups.
+ *  Dave Jones <davej@suse.de>, April 2000
+ *
+ *  Pentium III FXSR, SSE support
+ *  General FPU state handling cleanups
+ *  Gareth Hughes <gareth@valinux.com>, May 2000
+ *
+ *  Added proper Cascades CPU and L2 cache detection for Cascades
+ *  and 8-way type cache happy bunch from Intel:^)
+ *  Dragan Stancevic <visitor@valinux.com>, May 2000 
+ *
+ *  Forward port AMD Duron errata T13 from 2.2.17pre
+ *  Dave Jones <davej@suse.de>, August 2000
+ *
+ *  Forward port lots of fixes/improvements from 2.2.18pre
+ *  Cyrix III, Pentium IV support.
+ *  Dave Jones <davej@suse.de>, October 2000
+ *
+ *  Massive cleanup of CPU detection and bug handling;
+ *  Transmeta CPU detection,
+ *  H. Peter Anvin <hpa@zytor.com>, November 2000
+ *
+ *  VIA C3 Support.
+ *  Dave Jones <davej@suse.de>, March 2001
+ *
+ *  AMD Athlon/Duron/Thunderbird bluesmoke support.
+ *  Dave Jones <davej@suse.de>, April 2001.
+ *
+ *  CacheSize bug workaround updates for AMD, Intel & VIA Cyrix.
+ *  Dave Jones <davej@suse.de>, September, October 2001.
+ *
+ */
+
diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c
new file mode 100644
index 000000000000..ebd5d8247faa
--- /dev/null
+++ b/arch/i386/kernel/cpu/common.c
@@ -0,0 +1,634 @@
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/smp.h>
+#include <linux/module.h>
+#include <linux/percpu.h>
+#include <asm/semaphore.h>
+#include <asm/processor.h>
+#include <asm/i387.h>
+#include <asm/msr.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#ifdef CONFIG_X86_LOCAL_APIC
+#include <asm/mpspec.h>
+#include <asm/apic.h>
+#include <mach_apic.h>
+#endif
+
+#include "cpu.h"
+
+DEFINE_PER_CPU(struct desc_struct, cpu_gdt_table[GDT_ENTRIES]);
+EXPORT_PER_CPU_SYMBOL(cpu_gdt_table);
+
+DEFINE_PER_CPU(unsigned char, cpu_16bit_stack[CPU_16BIT_STACK_SIZE]);
+EXPORT_PER_CPU_SYMBOL(cpu_16bit_stack);
+
+static int cachesize_override __initdata = -1;
+static int disable_x86_fxsr __initdata = 0;
+static int disable_x86_serial_nr __initdata = 1;
+
+struct cpu_dev * cpu_devs[X86_VENDOR_NUM] = {};
+
+extern void mcheck_init(struct cpuinfo_x86 *c);
+
+extern int disable_pse;
+
+static void default_init(struct cpuinfo_x86 * c)
+{
+        /* Not much we can do here... */
+        /* Check if at least it has cpuid */
+        if (c->cpuid_level == -1) {
+                /* No cpuid. It must be an ancient CPU */
+                if (c->x86 == 4)
+                        strcpy(c->x86_model_id, "486");
+                else if (c->x86 == 3)
+                        strcpy(c->x86_model_id, "386");
+        }
+}
+
+static struct cpu_dev default_cpu = {
+        .c_init = default_init,
+};
+static struct cpu_dev * this_cpu = &default_cpu;
+
+static int __init cachesize_setup(char *str)
+{
+        get_option (&str, &cachesize_override);
+        return 1;
+}
+__setup("cachesize=", cachesize_setup);
+
+int __init get_model_name(struct cpuinfo_x86 *c)
+{
+        unsigned int *v;
+        char *p, *q;
+
+        if (cpuid_eax(0x80000000) < 0x80000004)
+                return 0;
+
+        v = (unsigned int *) c->x86_model_id;
+        cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]);
+        cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]);
+        cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]);
+        c->x86_model_id[48] = 0;
+
+        /* Intel chips right-justify this string for some dumb reason;
+           undo that brain damage */
+        p = q = &c->x86_model_id[0];
+        while ( *p == ' ' )
+             p++;
+        if ( p != q ) {
+             while ( *p )
+                  *q++ = *p++;
+             while ( q <= &c->x86_model_id[48] )
+                  *q++ = '\0';  /* Zero-pad the rest */
+        }
+
+        return 1;
+}
+
+
+void __init display_cacheinfo(struct cpuinfo_x86 *c)
+{
+        unsigned int n, dummy, ecx, edx, l2size;
+
+        n = cpuid_eax(0x80000000);
+
+        if (n >= 0x80000005) {
+                cpuid(0x80000005, &dummy, &dummy, &ecx, &edx);
+                printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n",
+                        edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
+                c->x86_cache_size=(ecx>>24)+(edx>>24);  
+        }
+
+        if (n < 0x80000006)     /* Some chips just has a large L1. */
+                return;
+
+        ecx = cpuid_ecx(0x80000006);
+        l2size = ecx >> 16;
+        
+        /* do processor-specific cache resizing */
+        if (this_cpu->c_size_cache)
+                l2size = this_cpu->c_size_cache(c,l2size);
+
+        /* Allow user to override all this if necessary. */
+        if (cachesize_override != -1)
+                l2size = cachesize_override;
+
+        if ( l2size == 0 )
+                return;         /* Again, no L2 cache is possible */
+
+        c->x86_cache_size = l2size;
+
+        printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n",
+               l2size, ecx & 0xFF);
+}
+
+/* Naming convention should be: <Name> [(<Codename>)] */
+/* This table only is used unless init_<vendor>() below doesn't set it; */
+/* in particular, if CPUID levels 0x80000002..4 are supported, this isn't used */
+
+/* Look up CPU names by table lookup. */
+static char __init *table_lookup_model(struct cpuinfo_x86 *c)
+{
+        struct cpu_model_info *info;
+
+        if ( c->x86_model >= 16 )
+                return NULL;    /* Range check */
+
+        if (!this_cpu)
+                return NULL;
+
+        info = this_cpu->c_models;
+
+        while (info && info->family) {
+                if (info->family == c->x86)
+                        return info->model_names[c->x86_model];
+                info++;
+        }
+        return NULL;            /* Not found */
+}
+
+
+void __init get_cpu_vendor(struct cpuinfo_x86 *c, int early)
+{
+        char *v = c->x86_vendor_id;
+        int i;
+
+        for (i = 0; i < X86_VENDOR_NUM; i++) {
+                if (cpu_devs[i]) {
+                        if (!strcmp(v,cpu_devs[i]->c_ident[0]) ||
+                            (cpu_devs[i]->c_ident[1] && 
+                             !strcmp(v,cpu_devs[i]->c_ident[1]))) {
+                                c->x86_vendor = i;
+                                if (!early)
+                                        this_cpu = cpu_devs[i];
+                                break;
+                        }
+                }
+        }
+}
+
+
+static int __init x86_fxsr_setup(char * s)
+{
+        disable_x86_fxsr = 1;
+        return 1;
+}
+__setup("nofxsr", x86_fxsr_setup);
+
+
+/* Standard macro to see if a specific flag is changeable */
+static inline int flag_is_changeable_p(u32 flag)
+{
+        u32 f1, f2;
+
+        asm("pushfl\n\t"
+            "pushfl\n\t"
+            "popl %0\n\t"
+            "movl %0,%1\n\t"
+            "xorl %2,%0\n\t"
+            "pushl %0\n\t"
+            "popfl\n\t"
+            "pushfl\n\t"
+            "popl %0\n\t"
+            "popfl\n\t"
+            : "=&r" (f1), "=&r" (f2)
+            : "ir" (flag));
+
+        return ((f1^f2) & flag) != 0;
+}
+
+
+/* Probe for the CPUID instruction */
+static int __init have_cpuid_p(void)
+{
+        return flag_is_changeable_p(X86_EFLAGS_ID);
+}
+
+/* Do minimum CPU detection early.
+   Fields really needed: vendor, cpuid_level, family, model, mask, cache alignment.
+   The others are not touched to avoid unwanted side effects. */
+static void __init early_cpu_detect(void)
+{
+        struct cpuinfo_x86 *c = &boot_cpu_data;
+
+        c->x86_cache_alignment = 32;
+
+        if (!have_cpuid_p())
+                return;
+
+        /* Get vendor name */
+        cpuid(0x00000000, &c->cpuid_level,
+              (int *)&c->x86_vendor_id[0],
+              (int *)&c->x86_vendor_id[8],
+              (int *)&c->x86_vendor_id[4]);
+
+        get_cpu_vendor(c, 1);
+
+        c->x86 = 4;
+        if (c->cpuid_level >= 0x00000001) {
+                u32 junk, tfms, cap0, misc;
+                cpuid(0x00000001, &tfms, &misc, &junk, &cap0);
+                c->x86 = (tfms >> 8) & 15;
+                c->x86_model = (tfms >> 4) & 15;
+                if (c->x86 == 0xf) {
+                        c->x86 += (tfms >> 20) & 0xff;
+                        c->x86_model += ((tfms >> 16) & 0xF) << 4;
+                }
+                c->x86_mask = tfms & 15;
+                if (cap0 & (1<<19))
+                        c->x86_cache_alignment = ((misc >> 8) & 0xff) * 8;
+        }
+
+        early_intel_workaround(c);
+}
+
+void __init generic_identify(struct cpuinfo_x86 * c)
+{
+        u32 tfms, xlvl;
+        int junk;
+
+        if (have_cpuid_p()) {
+                /* Get vendor name */
+                cpuid(0x00000000, &c->cpuid_level,
+                      (int *)&c->x86_vendor_id[0],
+                      (int *)&c->x86_vendor_id[8],
+                      (int *)&c->x86_vendor_id[4]);
+                
+                get_cpu_vendor(c, 0);
+                /* Initialize the standard set of capabilities */
+                /* Note that the vendor-specific code below might override */
+        
+                /* Intel-defined flags: level 0x00000001 */
+                if ( c->cpuid_level >= 0x00000001 ) {
+                        u32 capability, excap;
+                        cpuid(0x00000001, &tfms, &junk, &excap, &capability);
+                        c->x86_capability[0] = capability;
+                        c->x86_capability[4] = excap;
+                        c->x86 = (tfms >> 8) & 15;
+                        c->x86_model = (tfms >> 4) & 15;
+                        if (c->x86 == 0xf) {
+                                c->x86 += (tfms >> 20) & 0xff;
+                                c->x86_model += ((tfms >> 16) & 0xF) << 4;
+                        } 
+                        c->x86_mask = tfms & 15;
+                } else {
+                        /* Have CPUID level 0 only - unheard of */
+                        c->x86 = 4;
+                }
+
+                /* AMD-defined flags: level 0x80000001 */
+                xlvl = cpuid_eax(0x80000000);
+                if ( (xlvl & 0xffff0000) == 0x80000000 ) {
+                        if ( xlvl >= 0x80000001 ) {
+                                c->x86_capability[1] = cpuid_edx(0x80000001);
+                                c->x86_capability[6] = cpuid_ecx(0x80000001);
+                        }
+                        if ( xlvl >= 0x80000004 )
+                                get_model_name(c); /* Default name */
+                }
+        }
+}
+
+static void __init squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
+{
+        if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr ) {
+                /* Disable processor serial number */
+                unsigned long lo,hi;
+                rdmsr(MSR_IA32_BBL_CR_CTL,lo,hi);
+                lo |= 0x200000;
+                wrmsr(MSR_IA32_BBL_CR_CTL,lo,hi);
+                printk(KERN_NOTICE "CPU serial number disabled.\n");
+                clear_bit(X86_FEATURE_PN, c->x86_capability);
+
+                /* Disabling the serial number may affect the cpuid level */
+                c->cpuid_level = cpuid_eax(0);
+        }
+}
+
+static int __init x86_serial_nr_setup(char *s)
+{
+        disable_x86_serial_nr = 0;
+        return 1;
+}
+__setup("serialnumber", x86_serial_nr_setup);
+
+
+
+/*
+ * This does the hard work of actually picking apart the CPU stuff...
+ */
+void __init identify_cpu(struct cpuinfo_x86 *c)
+{
+        int i;
+
+        c->loops_per_jiffy = loops_per_jiffy;
+        c->x86_cache_size = -1;
+        c->x86_vendor = X86_VENDOR_UNKNOWN;
+        c->cpuid_level = -1;    /* CPUID not detected */
+        c->x86_model = c->x86_mask = 0; /* So far unknown... */
+        c->x86_vendor_id[0] = '\0'; /* Unset */
+        c->x86_model_id[0] = '\0';  /* Unset */
+        c->x86_num_cores = 1;
+        memset(&c->x86_capability, 0, sizeof c->x86_capability);
+
+        if (!have_cpuid_p()) {
+                /* First of all, decide if this is a 486 or higher */
+                /* It's a 486 if we can modify the AC flag */
+                if ( flag_is_changeable_p(X86_EFLAGS_AC) )
+                        c->x86 = 4;
+                else
+                        c->x86 = 3;
+        }
+
+        generic_identify(c);
+
+        printk(KERN_DEBUG "CPU: After generic identify, caps:");
+        for (i = 0; i < NCAPINTS; i++)
+                printk(" %08lx", c->x86_capability[i]);
+        printk("\n");
+
+        if (this_cpu->c_identify) {
+                this_cpu->c_identify(c);
+
+                printk(KERN_DEBUG "CPU: After vendor identify, caps:");
+                for (i = 0; i < NCAPINTS; i++)
+                        printk(" %08lx", c->x86_capability[i]);
+                printk("\n");
+        }
+
+        /*
+         * Vendor-specific initialization.  In this section we
+         * canonicalize the feature flags, meaning if there are
+         * features a certain CPU supports which CPUID doesn't
+         * tell us, CPUID claiming incorrect flags, or other bugs,
+         * we handle them here.
+         *
+         * At the end of this section, c->x86_capability better
+         * indicate the features this CPU genuinely supports!
+         */
+        if (this_cpu->c_init)
+                this_cpu->c_init(c);
+
+        /* Disable the PN if appropriate */
+        squash_the_stupid_serial_number(c);
+
+        /*
+         * The vendor-specific functions might have changed features.  Now
+         * we do "generic changes."
+         */
+
+        /* TSC disabled? */
+        if ( tsc_disable )
+                clear_bit(X86_FEATURE_TSC, c->x86_capability);
+
+        /* FXSR disabled? */
+        if (disable_x86_fxsr) {
+                clear_bit(X86_FEATURE_FXSR, c->x86_capability);
+                clear_bit(X86_FEATURE_XMM, c->x86_capability);
+        }
+
+        if (disable_pse)
+                clear_bit(X86_FEATURE_PSE, c->x86_capability);
+
+        /* If the model name is still unset, do table lookup. */
+        if ( !c->x86_model_id[0] ) {
+                char *p;
+                p = table_lookup_model(c);
+                if ( p )
+                        strcpy(c->x86_model_id, p);
+                else
+                        /* Last resort... */
+                        sprintf(c->x86_model_id, "%02x/%02x",
+                                c->x86_vendor, c->x86_model);
+        }
+
+        /* Now the feature flags better reflect actual CPU features! */
+
+        printk(KERN_DEBUG "CPU: After all inits, caps:");
+        for (i = 0; i < NCAPINTS; i++)
+                printk(" %08lx", c->x86_capability[i]);
+        printk("\n");
+
+        /*
+         * On SMP, boot_cpu_data holds the common feature set between
+         * all CPUs; so make sure that we indicate which features are
+         * common between the CPUs.  The first time this routine gets
+         * executed, c == &boot_cpu_data.
+         */
+        if ( c != &boot_cpu_data ) {
+                /* AND the already accumulated flags with these */
+                for ( i = 0 ; i < NCAPINTS ; i++ )
+                        boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
+        }
+
+        /* Init Machine Check Exception if available. */
+#ifdef CONFIG_X86_MCE
+        mcheck_init(c);
+#endif
+}
+
+#ifdef CONFIG_X86_HT
+void __init detect_ht(struct cpuinfo_x86 *c)
+{
+        u32     eax, ebx, ecx, edx;
+        int     index_lsb, index_msb, tmp;
+        int     cpu = smp_processor_id();
+
+        if (!cpu_has(c, X86_FEATURE_HT))
+                return;
+
+        cpuid(1, &eax, &ebx, &ecx, &edx);
+        smp_num_siblings = (ebx & 0xff0000) >> 16;
+
+        if (smp_num_siblings == 1) {
+                printk(KERN_INFO  "CPU: Hyper-Threading is disabled\n");
+        } else if (smp_num_siblings > 1 ) {
+                index_lsb = 0;
+                index_msb = 31;
+
+                if (smp_num_siblings > NR_CPUS) {
+                        printk(KERN_WARNING "CPU: Unsupported number of the siblings %d", smp_num_siblings);
+                        smp_num_siblings = 1;
+                        return;
+                }
+                tmp = smp_num_siblings;
+                while ((tmp & 1) == 0) {
+                        tmp >>=1 ;
+                        index_lsb++;
+                }
+                tmp = smp_num_siblings;
+                while ((tmp & 0x80000000 ) == 0) {
+                        tmp <<=1 ;
+                        index_msb--;
+                }
+                if (index_lsb != index_msb )
+                        index_msb++;
+                phys_proc_id[cpu] = phys_pkg_id((ebx >> 24) & 0xFF, index_msb);
+
+                printk(KERN_INFO  "CPU: Physical Processor ID: %d\n",
+                       phys_proc_id[cpu]);
+        }
+}
+#endif
+
+void __init print_cpu_info(struct cpuinfo_x86 *c)
+{
+        char *vendor = NULL;
+
+        if (c->x86_vendor < X86_VENDOR_NUM)
+                vendor = this_cpu->c_vendor;
+        else if (c->cpuid_level >= 0)
+                vendor = c->x86_vendor_id;
+
+        if (vendor && strncmp(c->x86_model_id, vendor, strlen(vendor)))
+                printk("%s ", vendor);
+
+        if (!c->x86_model_id[0])
+                printk("%d86", c->x86);
+        else
+                printk("%s", c->x86_model_id);
+
+        if (c->x86_mask || c->cpuid_level >= 0) 
+                printk(" stepping %02x\n", c->x86_mask);
+        else
+                printk("\n");
+}
+
+cpumask_t cpu_initialized __initdata = CPU_MASK_NONE;
+
+/* This is hacky. :)
+ * We're emulating future behavior.
+ * In the future, the cpu-specific init functions will be called implicitly
+ * via the magic of initcalls.
+ * They will insert themselves into the cpu_devs structure.
+ * Then, when cpu_init() is called, we can just iterate over that array.
+ */
+
+extern int intel_cpu_init(void);
+extern int cyrix_init_cpu(void);
+extern int nsc_init_cpu(void);
+extern int amd_init_cpu(void);
+extern int centaur_init_cpu(void);
+extern int transmeta_init_cpu(void);
+extern int rise_init_cpu(void);
+extern int nexgen_init_cpu(void);
+extern int umc_init_cpu(void);
+
+void __init early_cpu_init(void)
+{
+        intel_cpu_init();
+        cyrix_init_cpu();
+        nsc_init_cpu();
+        amd_init_cpu();
+        centaur_init_cpu();
+        transmeta_init_cpu();
+        rise_init_cpu();
+        nexgen_init_cpu();
+        umc_init_cpu();
+        early_cpu_detect();
+
+#ifdef CONFIG_DEBUG_PAGEALLOC
+        /* pse is not compatible with on-the-fly unmapping,
+         * disable it even if the cpus claim to support it.
+         */
+        clear_bit(X86_FEATURE_PSE, boot_cpu_data.x86_capability);
+        disable_pse = 1;
+#endif
+}
+/*
+ * cpu_init() initializes state that is per-CPU. Some data is already
+ * initialized (naturally) in the bootstrap process, such as the GDT
+ * and IDT. We reload them nevertheless, this function acts as a
+ * 'CPU state barrier', nothing should get across.
+ */
+void __init cpu_init (void)
+{
+        int cpu = smp_processor_id();
+        struct tss_struct * t = &per_cpu(init_tss, cpu);
+        struct thread_struct *thread = &current->thread;
+        __u32 stk16_off = (__u32)&per_cpu(cpu_16bit_stack, cpu);
+
+        if (cpu_test_and_set(cpu, cpu_initialized)) {
+                printk(KERN_WARNING "CPU#%d already initialized!\n", cpu);
+                for (;;) local_irq_enable();
+        }
+        printk(KERN_INFO "Initializing CPU#%d\n", cpu);
+
+        if (cpu_has_vme || cpu_has_tsc || cpu_has_de)
+                clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
+        if (tsc_disable && cpu_has_tsc) {
+                printk(KERN_NOTICE "Disabling TSC...\n");
+                /**** FIX-HPA: DOES THIS REALLY BELONG HERE? ****/
+                clear_bit(X86_FEATURE_TSC, boot_cpu_data.x86_capability);
+                set_in_cr4(X86_CR4_TSD);
+        }
+
+        /*
+         * Initialize the per-CPU GDT with the boot GDT,
+         * and set up the GDT descriptor:
+         */
+        memcpy(&per_cpu(cpu_gdt_table, cpu), cpu_gdt_table,
+               GDT_SIZE);
+
+        /* Set up GDT entry for 16bit stack */
+        *(__u64 *)&(per_cpu(cpu_gdt_table, cpu)[GDT_ENTRY_ESPFIX_SS]) |=
+                ((((__u64)stk16_off) << 16) & 0x000000ffffff0000ULL) |
+                ((((__u64)stk16_off) << 32) & 0xff00000000000000ULL) |
+                (CPU_16BIT_STACK_SIZE - 1);
+
+        cpu_gdt_descr[cpu].size = GDT_SIZE - 1;
+        cpu_gdt_descr[cpu].address =
+            (unsigned long)&per_cpu(cpu_gdt_table, cpu);
+
+        /*
+         * Set up the per-thread TLS descriptor cache:
+         */
+        memcpy(thread->tls_array, &per_cpu(cpu_gdt_table, cpu),
+                GDT_ENTRY_TLS_ENTRIES * 8);
+
+        __asm__ __volatile__("lgdt %0" : : "m" (cpu_gdt_descr[cpu]));
+        __asm__ __volatile__("lidt %0" : : "m" (idt_descr));
+
+        /*
+         * Delete NT
+         */
+        __asm__("pushfl ; andl $0xffffbfff,(%esp) ; popfl");
+
+        /*
+         * Set up and load the per-CPU TSS and LDT
+         */
+        atomic_inc(&init_mm.mm_count);
+        current->active_mm = &init_mm;
+        if (current->mm)
+                BUG();
+        enter_lazy_tlb(&init_mm, current);
+
+        load_esp0(t, thread);
+        set_tss_desc(cpu,t);
+        load_TR_desc();
+        load_LDT(&init_mm.context);
+
+        /* Set up doublefault TSS pointer in the GDT */
+        __set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss);
+
+        /* Clear %fs and %gs. */
+        asm volatile ("xorl %eax, %eax; movl %eax, %fs; movl %eax, %gs");
+
+        /* Clear all 6 debug registers: */
+
+#define CD(register) __asm__("movl %0,%%db" #register ::"r"(0) );
+
+        CD(0); CD(1); CD(2); CD(3); /* no db4 and db5 */; CD(6); CD(7);
+
+#undef CD
+
+        /*
+         * Force FPU initialization:
+         */
+        current_thread_info()->status = 0;
+        clear_used_math();
+        mxcsr_feature_mask_init();
+}
diff --git a/arch/i386/kernel/cpu/cpu.h b/arch/i386/kernel/cpu/cpu.h
new file mode 100644
index 000000000000..5a1d4f163e84
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpu.h
@@ -0,0 +1,30 @@
+
+struct cpu_model_info {
+        int vendor;
+        int family;
+        char *model_names[16];
+};
+
+/* attempt to consolidate cpu attributes */
+struct cpu_dev {
+        char    * c_vendor;
+
+        /* some have two possibilities for cpuid string */
+        char    * c_ident[2];   
+
+        struct          cpu_model_info c_models[4];
+
+        void            (*c_init)(struct cpuinfo_x86 * c);
+        void            (*c_identify)(struct cpuinfo_x86 * c);
+        unsigned int    (*c_size_cache)(struct cpuinfo_x86 * c, unsigned int size);
+};
+
+extern struct cpu_dev * cpu_devs [X86_VENDOR_NUM];
+
+extern int get_model_name(struct cpuinfo_x86 *c);
+extern void display_cacheinfo(struct cpuinfo_x86 *c);
+
+extern void generic_identify(struct cpuinfo_x86 * c);
+
+extern void early_intel_workaround(struct cpuinfo_x86 *c);
+
diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig
new file mode 100644
index 000000000000..f25ffd74235c
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/Kconfig
@@ -0,0 +1,231 @@
+#
+# CPU Frequency scaling
+#
+
+menu "CPU Frequency scaling"
+
+source "drivers/cpufreq/Kconfig"
+
+if CPU_FREQ
+
+comment "CPUFreq processor drivers"
+
+config X86_ACPI_CPUFREQ
+        tristate "ACPI Processor P-States driver"
+        select CPU_FREQ_TABLE
+        depends on ACPI_PROCESSOR
+        help
+          This driver adds a CPUFreq driver which utilizes the ACPI
+          Processor Performance States.
+
+          For details, take a look at <file:Documentation/cpu-freq/>.
+
+          If in doubt, say N.
+
+config ELAN_CPUFREQ
+        tristate "AMD Elan"
+        select CPU_FREQ_TABLE
+        depends on X86_ELAN
+        ---help---
+          This adds the CPUFreq driver for AMD Elan SC400 and SC410
+          processors.
+
+          You need to specify the processor maximum speed as boot
+          parameter: elanfreq=maxspeed (in kHz) or as module
+          parameter "max_freq".
+
+          For details, take a look at <file:Documentation/cpu-freq/>.
+
+          If in doubt, say N.
+
+config X86_POWERNOW_K6
+        tristate "AMD Mobile K6-2/K6-3 PowerNow!"
+        select CPU_FREQ_TABLE
+        help
+          This adds the CPUFreq driver for mobile AMD K6-2+ and mobile
+          AMD K6-3+ processors.
+
+          For details, take a look at <file:Documentation/cpu-freq/>.
+
+          If in doubt, say N.
+
+config X86_POWERNOW_K7
+        tristate "AMD Mobile Athlon/Duron PowerNow!"
+        select CPU_FREQ_TABLE
+        help
+          This adds the CPUFreq driver for mobile AMD K7 mobile processors.
+
+          For details, take a look at <file:Documentation/cpu-freq/>.
+
+          If in doubt, say N.
+
+config X86_POWERNOW_K7_ACPI
+        bool
+        depends on X86_POWERNOW_K7 && ACPI_PROCESSOR
+        depends on !(X86_POWERNOW_K7 = y && ACPI_PROCESSOR = m)
+        default y
+
+config X86_POWERNOW_K8
+        tristate "AMD Opteron/Athlon64 PowerNow!"
+        select CPU_FREQ_TABLE
+        depends on EXPERIMENTAL
+        help
+          This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors.
+
+          For details, take a look at <file:Documentation/cpu-freq/>.
+
+          If in doubt, say N.
+
+config X86_POWERNOW_K8_ACPI
+        bool
+        depends on X86_POWERNOW_K8 && ACPI_PROCESSOR
+        depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m)
+        default y
+
+config X86_GX_SUSPMOD
+        tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation"
+        help
+         This add the CPUFreq driver for NatSemi Geode processors which
+         support suspend modulation.
+
+         For details, take a look at <file:Documentation/cpu-freq/>.
+
+         If in doubt, say N.
+
+config X86_SPEEDSTEP_CENTRINO
+        tristate "Intel Enhanced SpeedStep"
+        select CPU_FREQ_TABLE
+        select X86_SPEEDSTEP_CENTRINO_TABLE if (!X86_SPEEDSTEP_CENTRINO_ACPI)
+        help
+          This adds the CPUFreq driver for Enhanced SpeedStep enabled
+          mobile CPUs.  This means Intel Pentium M (Centrino) CPUs. However,
+          you also need to say Y to "Use ACPI tables to decode..." below
+          [which might imply enabling ACPI] if you want to use this driver
+          on non-Banias CPUs.
+          
+          For details, take a look at <file:Documentation/cpu-freq/>.
+          
+          If in doubt, say N.
+
+config X86_SPEEDSTEP_CENTRINO_ACPI
+        bool "Use ACPI tables to decode valid frequency/voltage pairs"
+        depends on X86_SPEEDSTEP_CENTRINO && ACPI_PROCESSOR
+        depends on !(X86_SPEEDSTEP_CENTRINO = y && ACPI_PROCESSOR = m)
+        default y
+        help
+          Use primarily the information provided in the BIOS ACPI tables
+          to determine valid CPU frequency and voltage pairings. It is
+          required for the driver to work on non-Banias CPUs.
+
+          If in doubt, say Y.
+
+config X86_SPEEDSTEP_CENTRINO_TABLE
+        bool "Built-in tables for Banias CPUs"
+        depends on X86_SPEEDSTEP_CENTRINO
+        default y
+        help
+          Use built-in tables for Banias CPUs if ACPI encoding
+          is not available.
+
+          If in doubt, say N.
+
+config X86_SPEEDSTEP_ICH
+        tristate "Intel Speedstep on ICH-M chipsets (ioport interface)"
+        select CPU_FREQ_TABLE
+        help
+          This adds the CPUFreq driver for certain mobile Intel Pentium III
+          (Coppermine), all mobile Intel Pentium III-M (Tualatin) and all
+          mobile Intel Pentium 4 P4-M on systems which have an Intel ICH2, 
+          ICH3 or ICH4 southbridge.
+
+          For details, take a look at <file:Documentation/cpu-freq/>.
+
+          If in doubt, say N.
+
+config X86_SPEEDSTEP_SMI
+        tristate "Intel SpeedStep on 440BX/ZX/MX chipsets (SMI interface)"
+        select CPU_FREQ_TABLE
+        depends on EXPERIMENTAL
+        help
+          This adds the CPUFreq driver for certain mobile Intel Pentium III
+          (Coppermine), all mobile Intel Pentium III-M (Tualatin)  
+          on systems which have an Intel 440BX/ZX/MX southbridge.
+
+          For details, take a look at <file:Documentation/cpu-freq/>.
+
+          If in doubt, say N.
+
+config X86_P4_CLOCKMOD
+        tristate "Intel Pentium 4 clock modulation"
+        select CPU_FREQ_TABLE
+        help
+          This adds the CPUFreq driver for Intel Pentium 4 / XEON
+          processors.
+
+          For details, take a look at <file:Documentation/cpu-freq/>.
+
+          If in doubt, say N.
+
+config X86_CPUFREQ_NFORCE2
+        tristate "nVidia nForce2 FSB changing"
+        depends on EXPERIMENTAL
+        help
+          This adds the CPUFreq driver for FSB changing on nVidia nForce2
+          platforms.
+
+          For details, take a look at <file:Documentation/cpu-freq/>.
+
+          If in doubt, say N.
+
+config X86_LONGRUN
+        tristate "Transmeta LongRun"
+        help
+          This adds the CPUFreq driver for Transmeta Crusoe and Efficeon processors
+          which support LongRun.
+
+          For details, take a look at <file:Documentation/cpu-freq/>.
+
+          If in doubt, say N.
+
+config X86_LONGHAUL
+        tristate "VIA Cyrix III Longhaul"
+        select CPU_FREQ_TABLE
+        help
+          This adds the CPUFreq driver for VIA Samuel/CyrixIII, 
+          VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T 
+          processors.
+
+          For details, take a look at <file:Documentation/cpu-freq/>.
+
+          If in doubt, say N.
+
+comment "shared options"
+
+config X86_ACPI_CPUFREQ_PROC_INTF
+        bool "/proc/acpi/processor/../performance interface (deprecated)"
+        depends on PROC_FS
+        depends on X86_ACPI_CPUFREQ || X86_SPEEDSTEP_CENTRINO_ACPI || X86_POWERNOW_K7_ACPI || X86_POWERNOW_K8_ACPI
+        help
+          This enables the deprecated /proc/acpi/processor/../performance 
+          interface. While it is helpful for debugging, the generic,
+          cross-architecture cpufreq interfaces should be used.
+
+          If in doubt, say N.
+
+config X86_SPEEDSTEP_LIB
+        tristate
+        default X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD
+
+config X86_SPEEDSTEP_RELAXED_CAP_CHECK
+        bool "Relaxed speedstep capability checks"
+        depends on (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH)
+        help
+          Don't perform all checks for a speedstep capable system which would 
+          normally be done. Some ancient or strange systems, though speedstep 
+          capable, don't always indicate that they are speedstep capable. This 
+          option lets the probing code bypass some of those checks if the
+          parameter "relaxed_check=1" is passed to the module.
+
+endif   # CPU_FREQ
+
+endmenu
diff --git a/arch/i386/kernel/cpu/cpufreq/Makefile b/arch/i386/kernel/cpu/cpufreq/Makefile
new file mode 100644
index 000000000000..a922e97aeedd
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/Makefile
@@ -0,0 +1,14 @@
+obj-$(CONFIG_X86_POWERNOW_K6)           += powernow-k6.o
+obj-$(CONFIG_X86_POWERNOW_K7)           += powernow-k7.o
+obj-$(CONFIG_X86_POWERNOW_K8)           += powernow-k8.o
+obj-$(CONFIG_X86_LONGHAUL)              += longhaul.o
+obj-$(CONFIG_ELAN_CPUFREQ)              += elanfreq.o
+obj-$(CONFIG_X86_LONGRUN)               += longrun.o  
+obj-$(CONFIG_X86_GX_SUSPMOD)            += gx-suspmod.o
+obj-$(CONFIG_X86_SPEEDSTEP_ICH)         += speedstep-ich.o
+obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO)    += speedstep-centrino.o
+obj-$(CONFIG_X86_SPEEDSTEP_LIB)         += speedstep-lib.o
+obj-$(CONFIG_X86_SPEEDSTEP_SMI)         += speedstep-smi.o
+obj-$(CONFIG_X86_ACPI_CPUFREQ)          += acpi-cpufreq.o
+obj-$(CONFIG_X86_P4_CLOCKMOD)           += p4-clockmod.o
+obj-$(CONFIG_X86_CPUFREQ_NFORCE2)       += cpufreq-nforce2.o
diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
new file mode 100644
index 000000000000..963e17aa205d
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -0,0 +1,537 @@
+/*
+ * acpi-cpufreq.c - ACPI Processor P-States Driver ($Revision: 1.3 $)
+ *
+ *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
+ *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ *  Copyright (C) 2002 - 2004 Dominik Brodowski <linux@brodo.de>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or (at
+ *  your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+#include <asm/uaccess.h>
+
+#include <linux/acpi.h>
+#include <acpi/processor.h>
+
+#include "speedstep-est-common.h"
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "acpi-cpufreq", msg)
+
+MODULE_AUTHOR("Paul Diefenbaugh, Dominik Brodowski");
+MODULE_DESCRIPTION("ACPI Processor P-States Driver");
+MODULE_LICENSE("GPL");
+
+
+struct cpufreq_acpi_io {
+        struct acpi_processor_performance       acpi_data;
+        struct cpufreq_frequency_table          *freq_table;
+        unsigned int                            resume;
+};
+
+static struct cpufreq_acpi_io   *acpi_io_data[NR_CPUS];
+
+static struct cpufreq_driver acpi_cpufreq_driver;
+
+static int
+acpi_processor_write_port(
+        u16     port,
+        u8      bit_width,
+        u32     value)
+{
+        if (bit_width <= 8) {
+                outb(value, port);
+        } else if (bit_width <= 16) {
+                outw(value, port);
+        } else if (bit_width <= 32) {
+                outl(value, port);
+        } else {
+                return -ENODEV;
+        }
+        return 0;
+}
+
+static int
+acpi_processor_read_port(
+        u16     port,
+        u8      bit_width,
+        u32     *ret)
+{
+        *ret = 0;
+        if (bit_width <= 8) {
+                *ret = inb(port);
+        } else if (bit_width <= 16) {
+                *ret = inw(port);
+        } else if (bit_width <= 32) {
+                *ret = inl(port);
+        } else {
+                return -ENODEV;
+        }
+        return 0;
+}
+
+static int
+acpi_processor_set_performance (
+        struct cpufreq_acpi_io  *data,
+        unsigned int            cpu,
+        int                     state)
+{
+        u16                     port = 0;
+        u8                      bit_width = 0;
+        int                     ret = 0;
+        u32                     value = 0;
+        int                     i = 0;
+        struct cpufreq_freqs    cpufreq_freqs;
+        cpumask_t               saved_mask;
+        int                     retval;
+
+        dprintk("acpi_processor_set_performance\n");
+
+        /*
+         * TBD: Use something other than set_cpus_allowed.
+         * As set_cpus_allowed is a bit racy, 
+         * with any other set_cpus_allowed for this process.
+         */
+        saved_mask = current->cpus_allowed;
+        set_cpus_allowed(current, cpumask_of_cpu(cpu));
+        if (smp_processor_id() != cpu) {
+                return (-EAGAIN);
+        }
+        
+        if (state == data->acpi_data.state) {
+                if (unlikely(data->resume)) {
+                        dprintk("Called after resume, resetting to P%d\n", state);
+                        data->resume = 0;
+                } else {
+                        dprintk("Already at target state (P%d)\n", state);
+                        retval = 0;
+                        goto migrate_end;
+                }
+        }
+
+        dprintk("Transitioning from P%d to P%d\n",
+                data->acpi_data.state, state);
+
+        /* cpufreq frequency struct */
+        cpufreq_freqs.cpu = cpu;
+        cpufreq_freqs.old = data->freq_table[data->acpi_data.state].frequency;
+        cpufreq_freqs.new = data->freq_table[state].frequency;
+
+        /* notify cpufreq */
+        cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_PRECHANGE);
+
+        /*
+         * First we write the target state's 'control' value to the
+         * control_register.
+         */
+
+        port = data->acpi_data.control_register.address;
+        bit_width = data->acpi_data.control_register.bit_width;
+        value = (u32) data->acpi_data.states[state].control;
+
+        dprintk("Writing 0x%08x to port 0x%04x\n", value, port);
+
+        ret = acpi_processor_write_port(port, bit_width, value);
+        if (ret) {
+                dprintk("Invalid port width 0x%04x\n", bit_width);
+                retval = ret;
+                goto migrate_end;
+        }
+
+        /*
+         * Then we read the 'status_register' and compare the value with the
+         * target state's 'status' to make sure the transition was successful.
+         * Note that we'll poll for up to 1ms (100 cycles of 10us) before
+         * giving up.
+         */
+
+        port = data->acpi_data.status_register.address;
+        bit_width = data->acpi_data.status_register.bit_width;
+
+        dprintk("Looking for 0x%08x from port 0x%04x\n",
+                (u32) data->acpi_data.states[state].status, port);
+
+        for (i=0; i<100; i++) {
+                ret = acpi_processor_read_port(port, bit_width, &value);
+                if (ret) {      
+                        dprintk("Invalid port width 0x%04x\n", bit_width);
+                        retval = ret;
+                        goto migrate_end;
+                }
+                if (value == (u32) data->acpi_data.states[state].status)
+                        break;
+                udelay(10);
+        }
+
+        /* notify cpufreq */
+        cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_POSTCHANGE);
+
+        if (value != (u32) data->acpi_data.states[state].status) {
+                unsigned int tmp = cpufreq_freqs.new;
+                cpufreq_freqs.new = cpufreq_freqs.old;
+                cpufreq_freqs.old = tmp;
+                cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_PRECHANGE);
+                cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_POSTCHANGE);
+                printk(KERN_WARNING "acpi-cpufreq: Transition failed\n");
+                retval = -ENODEV;
+                goto migrate_end;
+        }
+
+        dprintk("Transition successful after %d microseconds\n", i * 10);
+
+        data->acpi_data.state = state;
+
+        retval = 0;
+migrate_end:
+        set_cpus_allowed(current, saved_mask);
+        return (retval);
+}
+
+
+static int
+acpi_cpufreq_target (
+        struct cpufreq_policy   *policy,
+        unsigned int target_freq,
+        unsigned int relation)
+{
+        struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
+        unsigned int next_state = 0;
+        unsigned int result = 0;
+
+        dprintk("acpi_cpufreq_setpolicy\n");
+
+        result = cpufreq_frequency_table_target(policy,
+                        data->freq_table,
+                        target_freq,
+                        relation,
+                        &next_state);
+        if (result)
+                return (result);
+
+        result = acpi_processor_set_performance (data, policy->cpu, next_state);
+
+        return (result);
+}
+
+
+static int
+acpi_cpufreq_verify (
+        struct cpufreq_policy   *policy)
+{
+        unsigned int result = 0;
+        struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
+
+        dprintk("acpi_cpufreq_verify\n");
+
+        result = cpufreq_frequency_table_verify(policy, 
+                        data->freq_table);
+
+        return (result);
+}
+
+
+static unsigned long
+acpi_cpufreq_guess_freq (
+        struct cpufreq_acpi_io  *data,
+        unsigned int            cpu)
+{
+        if (cpu_khz) {
+                /* search the closest match to cpu_khz */
+                unsigned int i;
+                unsigned long freq;
+                unsigned long freqn = data->acpi_data.states[0].core_frequency * 1000;
+
+                for (i=0; i < (data->acpi_data.state_count - 1); i++) {
+                        freq = freqn;
+                        freqn = data->acpi_data.states[i+1].core_frequency * 1000;
+                        if ((2 * cpu_khz) > (freqn + freq)) {
+                                data->acpi_data.state = i;
+                                return (freq);
+                        }
+                }
+                data->acpi_data.state = data->acpi_data.state_count - 1;
+                return (freqn);
+        } else
+                /* assume CPU is at P0... */
+                data->acpi_data.state = 0;
+                return data->acpi_data.states[0].core_frequency * 1000;
+        
+}
+
+
+/* 
+ * acpi_processor_cpu_init_pdc_est - let BIOS know about the SMP capabilities
+ * of this driver
+ * @perf: processor-specific acpi_io_data struct
+ * @cpu: CPU being initialized
+ *
+ * To avoid issues with legacy OSes, some BIOSes require to be informed of
+ * the SMP capabilities of OS P-state driver. Here we set the bits in _PDC 
+ * accordingly, for Enhanced Speedstep. Actual call to _PDC is done in
+ * driver/acpi/processor.c
+ */
+static void 
+acpi_processor_cpu_init_pdc_est(
+                struct acpi_processor_performance *perf, 
+                unsigned int cpu,
+                struct acpi_object_list *obj_list
+                )
+{
+        union acpi_object *obj;
+        u32 *buf;
+        struct cpuinfo_x86 *c = cpu_data + cpu;
+        dprintk("acpi_processor_cpu_init_pdc_est\n");
+
+        if (!cpu_has(c, X86_FEATURE_EST))
+                return;
+
+        /* Initialize pdc. It will be used later. */
+        if (!obj_list)
+                return;
+                
+        if (!(obj_list->count && obj_list->pointer))
+                return;
+
+        obj = obj_list->pointer;
+        if ((obj->buffer.length == 12) && obj->buffer.pointer) {
+                buf = (u32 *)obj->buffer.pointer;
+                buf[0] = ACPI_PDC_REVISION_ID;
+                buf[1] = 1;
+                buf[2] = ACPI_PDC_EST_CAPABILITY_SMP;
+                perf->pdc = obj_list;
+        }
+        return;
+}
+ 
+
+/* CPU specific PDC initialization */
+static void 
+acpi_processor_cpu_init_pdc(
+                struct acpi_processor_performance *perf, 
+                unsigned int cpu,
+                struct acpi_object_list *obj_list
+                )
+{
+        struct cpuinfo_x86 *c = cpu_data + cpu;
+        dprintk("acpi_processor_cpu_init_pdc\n");
+        perf->pdc = NULL;
+        if (cpu_has(c, X86_FEATURE_EST))
+                acpi_processor_cpu_init_pdc_est(perf, cpu, obj_list);
+        return;
+}
+
+
+static int
+acpi_cpufreq_cpu_init (
+        struct cpufreq_policy   *policy)
+{
+        unsigned int            i;
+        unsigned int            cpu = policy->cpu;
+        struct cpufreq_acpi_io  *data;
+        unsigned int            result = 0;
+
+        union acpi_object               arg0 = {ACPI_TYPE_BUFFER};
+        u32                             arg0_buf[3];
+        struct acpi_object_list         arg_list = {1, &arg0};
+
+        dprintk("acpi_cpufreq_cpu_init\n");
+        /* setup arg_list for _PDC settings */
+        arg0.buffer.length = 12;
+        arg0.buffer.pointer = (u8 *) arg0_buf;
+
+        data = kmalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL);
+        if (!data)
+                return (-ENOMEM);
+        memset(data, 0, sizeof(struct cpufreq_acpi_io));
+
+        acpi_io_data[cpu] = data;
+
+        acpi_processor_cpu_init_pdc(&data->acpi_data, cpu, &arg_list);
+        result = acpi_processor_register_performance(&data->acpi_data, cpu);
+        data->acpi_data.pdc = NULL;
+
+        if (result)
+                goto err_free;
+
+        if (is_const_loops_cpu(cpu)) {
+                acpi_cpufreq_driver.flags |= CPUFREQ_CONST_LOOPS;
+        }
+
+        /* capability check */
+        if (data->acpi_data.state_count <= 1) {
+                dprintk("No P-States\n");
+                result = -ENODEV;
+                goto err_unreg;
+        }
+        if ((data->acpi_data.control_register.space_id != ACPI_ADR_SPACE_SYSTEM_IO) ||
+            (data->acpi_data.status_register.space_id != ACPI_ADR_SPACE_SYSTEM_IO)) {
+                dprintk("Unsupported address space [%d, %d]\n",
+                        (u32) (data->acpi_data.control_register.space_id),
+                        (u32) (data->acpi_data.status_register.space_id));
+                result = -ENODEV;
+                goto err_unreg;
+        }
+
+        /* alloc freq_table */
+        data->freq_table = kmalloc(sizeof(struct cpufreq_frequency_table) * (data->acpi_data.state_count + 1), GFP_KERNEL);
+        if (!data->freq_table) {
+                result = -ENOMEM;
+                goto err_unreg;
+        }
+
+        /* detect transition latency */
+        policy->cpuinfo.transition_latency = 0;
+        for (i=0; i<data->acpi_data.state_count; i++) {
+                if ((data->acpi_data.states[i].transition_latency * 1000) > policy->cpuinfo.transition_latency)
+                        policy->cpuinfo.transition_latency = data->acpi_data.states[i].transition_latency * 1000;
+        }
+        policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+        /* The current speed is unknown and not detectable by ACPI...  */
+        policy->cur = acpi_cpufreq_guess_freq(data, policy->cpu);
+
+        /* table init */
+        for (i=0; i<=data->acpi_data.state_count; i++)
+        {
+                data->freq_table[i].index = i;
+                if (i<data->acpi_data.state_count)
+                        data->freq_table[i].frequency = data->acpi_data.states[i].core_frequency * 1000;
+                else
+                        data->freq_table[i].frequency = CPUFREQ_TABLE_END;
+        }
+
+        result = cpufreq_frequency_table_cpuinfo(policy, data->freq_table);
+        if (result) {
+                goto err_freqfree;
+        }
+
+        /* notify BIOS that we exist */
+        acpi_processor_notify_smm(THIS_MODULE);
+
+        printk(KERN_INFO "acpi-cpufreq: CPU%u - ACPI performance management activated.\n",
+               cpu);
+        for (i = 0; i < data->acpi_data.state_count; i++)
+                dprintk("     %cP%d: %d MHz, %d mW, %d uS\n",
+                        (i == data->acpi_data.state?'*':' '), i,
+                        (u32) data->acpi_data.states[i].core_frequency,
+                        (u32) data->acpi_data.states[i].power,
+                        (u32) data->acpi_data.states[i].transition_latency);
+
+        cpufreq_frequency_table_get_attr(data->freq_table, policy->cpu);
+        return (result);
+
+ err_freqfree:
+        kfree(data->freq_table);
+ err_unreg:
+        acpi_processor_unregister_performance(&data->acpi_data, cpu);
+ err_free:
+        kfree(data);
+        acpi_io_data[cpu] = NULL;
+
+        return (result);
+}
+
+
+static int
+acpi_cpufreq_cpu_exit (
+        struct cpufreq_policy   *policy)
+{
+        struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
+
+
+        dprintk("acpi_cpufreq_cpu_exit\n");
+
+        if (data) {
+                cpufreq_frequency_table_put_attr(policy->cpu);
+                acpi_io_data[policy->cpu] = NULL;
+                acpi_processor_unregister_performance(&data->acpi_data, policy->cpu);
+                kfree(data);
+        }
+
+        return (0);
+}
+
+static int
+acpi_cpufreq_resume (
+        struct cpufreq_policy   *policy)
+{
+        struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
+
+
+        dprintk("acpi_cpufreq_resume\n");
+
+        data->resume = 1;
+
+        return (0);
+}
+
+
+static struct freq_attr* acpi_cpufreq_attr[] = {
+        &cpufreq_freq_attr_scaling_available_freqs,
+        NULL,
+};
+
+static struct cpufreq_driver acpi_cpufreq_driver = {
+        .verify         = acpi_cpufreq_verify,
+        .target         = acpi_cpufreq_target,
+        .init           = acpi_cpufreq_cpu_init,
+        .exit           = acpi_cpufreq_cpu_exit,
+        .resume         = acpi_cpufreq_resume,
+        .name           = "acpi-cpufreq",
+        .owner          = THIS_MODULE,
+        .attr           = acpi_cpufreq_attr,
+};
+
+
+static int __init
+acpi_cpufreq_init (void)
+{
+        int                     result = 0;
+
+        dprintk("acpi_cpufreq_init\n");
+
+        result = cpufreq_register_driver(&acpi_cpufreq_driver);
+        
+        return (result);
+}
+
+
+static void __exit
+acpi_cpufreq_exit (void)
+{
+        dprintk("acpi_cpufreq_exit\n");
+
+        cpufreq_unregister_driver(&acpi_cpufreq_driver);
+
+        return;
+}
+
+
+late_initcall(acpi_cpufreq_init);
+module_exit(acpi_cpufreq_exit);
+
+MODULE_ALIAS("acpi");
diff --git a/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c
new file mode 100644
index 000000000000..04a405345203
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c
@@ -0,0 +1,457 @@
+/*
+ * (C) 2004  Sebastian Witt <se.witt@gmx.net>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *  Based upon reverse engineered information
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#define NFORCE2_XTAL 25
+#define NFORCE2_BOOTFSB 0x48
+#define NFORCE2_PLLENABLE 0xa8
+#define NFORCE2_PLLREG 0xa4
+#define NFORCE2_PLLADR 0xa0
+#define NFORCE2_PLL(mul, div) (0x100000 | (mul << 8) | div)
+
+#define NFORCE2_MIN_FSB 50
+#define NFORCE2_SAFE_DISTANCE 50
+
+/* Delay in ms between FSB changes */
+//#define NFORCE2_DELAY 10
+
+/* nforce2_chipset:
+ * FSB is changed using the chipset
+ */
+static struct pci_dev *nforce2_chipset_dev;
+
+/* fid:
+ * multiplier * 10
+ */
+static int fid = 0;
+
+/* min_fsb, max_fsb:
+ * minimum and maximum FSB (= FSB at boot time) 
+ */
+static int min_fsb = 0;
+static int max_fsb = 0;
+
+MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>");
+MODULE_DESCRIPTION("nForce2 FSB changing cpufreq driver");
+MODULE_LICENSE("GPL");
+
+module_param(fid, int, 0444);
+module_param(min_fsb, int, 0444);
+
+MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)");
+MODULE_PARM_DESC(min_fsb,
+                 "Minimum FSB to use, if not defined: current FSB - 50");
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "cpufreq-nforce2", msg)
+
+/*
+ * nforce2_calc_fsb - calculate FSB
+ * @pll: PLL value
+ * 
+ *   Calculates FSB from PLL value
+ */
+static int nforce2_calc_fsb(int pll)
+{
+        unsigned char mul, div;
+
+        mul = (pll >> 8) & 0xff;
+        div = pll & 0xff;
+
+        if (div > 0)
+                return NFORCE2_XTAL * mul / div;
+
+        return 0;
+}
+
+/*
+ * nforce2_calc_pll - calculate PLL value
+ * @fsb: FSB
+ * 
+ *   Calculate PLL value for given FSB
+ */
+static int nforce2_calc_pll(unsigned int fsb)
+{
+        unsigned char xmul, xdiv;
+        unsigned char mul = 0, div = 0;
+        int tried = 0;
+
+        /* Try to calculate multiplier and divider up to 4 times */
+        while (((mul == 0) || (div == 0)) && (tried <= 3)) {
+                for (xdiv = 1; xdiv <= 0x80; xdiv++)
+                        for (xmul = 1; xmul <= 0xfe; xmul++)
+                                if (nforce2_calc_fsb(NFORCE2_PLL(xmul, xdiv)) ==
+                                    fsb + tried) {
+                                        mul = xmul;
+                                        div = xdiv;
+                                }
+                tried++;
+        }
+
+        if ((mul == 0) || (div == 0))
+                return -1;
+
+        return NFORCE2_PLL(mul, div);
+}
+
+/*
+ * nforce2_write_pll - write PLL value to chipset
+ * @pll: PLL value
+ * 
+ *   Writes new FSB PLL value to chipset
+ */
+static void nforce2_write_pll(int pll)
+{
+        int temp;
+
+        /* Set the pll addr. to 0x00 */
+        temp = 0x00;
+        pci_write_config_dword(nforce2_chipset_dev, NFORCE2_PLLADR, temp);
+
+        /* Now write the value in all 64 registers */
+        for (temp = 0; temp <= 0x3f; temp++) {
+                pci_write_config_dword(nforce2_chipset_dev, 
+                                       NFORCE2_PLLREG, pll);
+        }
+
+        return;
+}
+
+/*
+ * nforce2_fsb_read - Read FSB
+ *
+ *   Read FSB from chipset
+ *   If bootfsb != 0, return FSB at boot-time
+ */
+static unsigned int nforce2_fsb_read(int bootfsb)
+{
+        struct pci_dev *nforce2_sub5;
+        u32 fsb, temp = 0;
+
+        
+        /* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */
+        nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA,
+                                      0x01EF,
+                                      PCI_ANY_ID,
+                                      PCI_ANY_ID,
+                                      NULL);
+        
+        if (!nforce2_sub5)
+                return 0;
+
+        pci_read_config_dword(nforce2_sub5, NFORCE2_BOOTFSB, &fsb);
+        fsb /= 1000000;
+        
+        /* Check if PLL register is already set */
+        pci_read_config_byte(nforce2_chipset_dev, 
+                             NFORCE2_PLLENABLE, (u8 *)&temp);
+        
+        if(bootfsb || !temp)
+                return fsb;
+                
+        /* Use PLL register FSB value */
+        pci_read_config_dword(nforce2_chipset_dev, 
+                              NFORCE2_PLLREG, &temp);
+        fsb = nforce2_calc_fsb(temp);
+
+        return fsb;
+}
+
+/*
+ * nforce2_set_fsb - set new FSB
+ * @fsb: New FSB
+ * 
+ *   Sets new FSB
+ */
+static int nforce2_set_fsb(unsigned int fsb)
+{
+        u32 pll, temp = 0;
+        unsigned int tfsb;
+        int diff;
+
+        if ((fsb > max_fsb) || (fsb < NFORCE2_MIN_FSB)) {
+                printk(KERN_ERR "cpufreq: FSB %d is out of range!\n", fsb);
+                return -EINVAL;
+        }
+        
+        tfsb = nforce2_fsb_read(0);
+        if (!tfsb) {
+                printk(KERN_ERR "cpufreq: Error while reading the FSB\n");
+                return -EINVAL;
+        }
+
+        /* First write? Then set actual value */
+        pci_read_config_byte(nforce2_chipset_dev, 
+                             NFORCE2_PLLENABLE, (u8 *)&temp);
+        if (!temp) {
+                pll = nforce2_calc_pll(tfsb);
+
+                if (pll < 0)
+                        return -EINVAL;
+
+                nforce2_write_pll(pll);
+        }
+
+        /* Enable write access */
+        temp = 0x01;
+        pci_write_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8)temp);
+
+        diff = tfsb - fsb;
+
+        if (!diff)
+                return 0;
+
+        while ((tfsb != fsb) && (tfsb <= max_fsb) && (tfsb >= min_fsb)) {
+                if (diff < 0)
+                        tfsb++;
+                else
+                        tfsb--;
+
+                /* Calculate the PLL reg. value */
+                if ((pll = nforce2_calc_pll(tfsb)) == -1)
+                        return -EINVAL;
+                
+                nforce2_write_pll(pll);
+#ifdef NFORCE2_DELAY
+                mdelay(NFORCE2_DELAY);
+#endif
+        }
+
+        temp = 0x40;
+        pci_write_config_byte(nforce2_chipset_dev, NFORCE2_PLLADR, (u8)temp);
+
+        return 0;
+}
+
+/**
+ * nforce2_get - get the CPU frequency
+ * @cpu: CPU number
+ * 
+ * Returns the CPU frequency
+ */
+static unsigned int nforce2_get(unsigned int cpu)
+{
+        if (cpu)
+                return 0;
+        return nforce2_fsb_read(0) * fid * 100;
+}
+
+/**
+ * nforce2_target - set a new CPUFreq policy
+ * @policy: new policy
+ * @target_freq: the target frequency
+ * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
+ *
+ * Sets a new CPUFreq policy.
+ */
+static int nforce2_target(struct cpufreq_policy *policy,
+                          unsigned int target_freq, unsigned int relation)
+{
+//        unsigned long         flags;
+        struct cpufreq_freqs freqs;
+        unsigned int target_fsb;
+
+        if ((target_freq > policy->max) || (target_freq < policy->min))
+                return -EINVAL;
+
+        target_fsb = target_freq / (fid * 100);
+
+        freqs.old = nforce2_get(policy->cpu);
+        freqs.new = target_fsb * fid * 100;
+        freqs.cpu = 0;          /* Only one CPU on nForce2 plattforms */
+
+        if (freqs.old == freqs.new)
+                return 0;
+
+        dprintk(KERN_INFO "cpufreq: Old CPU frequency %d kHz, new %d kHz\n",
+               freqs.old, freqs.new);
+
+        cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+        /* Disable IRQs */
+        //local_irq_save(flags);
+
+        if (nforce2_set_fsb(target_fsb) < 0)
+                printk(KERN_ERR "cpufreq: Changing FSB to %d failed\n",
+                       target_fsb);
+        else
+                dprintk(KERN_INFO "cpufreq: Changed FSB successfully to %d\n",
+                       target_fsb);
+
+        /* Enable IRQs */
+        //local_irq_restore(flags);
+
+        cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+        return 0;
+}
+
+/**
+ * nforce2_verify - verifies a new CPUFreq policy
+ * @policy: new policy
+ */
+static int nforce2_verify(struct cpufreq_policy *policy)
+{
+        unsigned int fsb_pol_max;
+
+        fsb_pol_max = policy->max / (fid * 100);
+
+        if (policy->min < (fsb_pol_max * fid * 100))
+                policy->max = (fsb_pol_max + 1) * fid * 100;
+
+        cpufreq_verify_within_limits(policy,
+                                     policy->cpuinfo.min_freq,
+                                     policy->cpuinfo.max_freq);
+        return 0;
+}
+
+static int nforce2_cpu_init(struct cpufreq_policy *policy)
+{
+        unsigned int fsb;
+        unsigned int rfid;
+
+        /* capability check */
+        if (policy->cpu != 0)
+                return -ENODEV;
+
+        /* Get current FSB */
+        fsb = nforce2_fsb_read(0);
+
+        if (!fsb)
+                return -EIO;
+
+        /* FIX: Get FID from CPU */
+        if (!fid) {
+                if (!cpu_khz) {
+                        printk(KERN_WARNING
+                               "cpufreq: cpu_khz not set, can't calculate multiplier!\n");
+                        return -ENODEV;
+                }
+
+                fid = cpu_khz / (fsb * 100);
+                rfid = fid % 5;
+
+                if (rfid) {
+                        if (rfid > 2)
+                                fid += 5 - rfid;
+                        else
+                                fid -= rfid;
+                }
+        }
+
+        printk(KERN_INFO "cpufreq: FSB currently at %i MHz, FID %d.%d\n", fsb,
+               fid / 10, fid % 10);
+        
+        /* Set maximum FSB to FSB at boot time */
+        max_fsb = nforce2_fsb_read(1);
+        
+        if(!max_fsb)
+                return -EIO;
+
+        if (!min_fsb)
+                min_fsb = max_fsb - NFORCE2_SAFE_DISTANCE;
+
+        if (min_fsb < NFORCE2_MIN_FSB)
+                min_fsb = NFORCE2_MIN_FSB;
+
+        /* cpuinfo and default policy values */
+        policy->cpuinfo.min_freq = min_fsb * fid * 100;
+        policy->cpuinfo.max_freq = max_fsb * fid * 100;
+        policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+        policy->cur = nforce2_get(policy->cpu);
+        policy->min = policy->cpuinfo.min_freq;
+        policy->max = policy->cpuinfo.max_freq;
+        policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+        return 0;
+}
+
+static int nforce2_cpu_exit(struct cpufreq_policy *policy)
+{
+        return 0;
+}
+
+static struct cpufreq_driver nforce2_driver = {
+        .name = "nforce2",
+        .verify = nforce2_verify,
+        .target = nforce2_target,
+        .get = nforce2_get,
+        .init = nforce2_cpu_init,
+        .exit = nforce2_cpu_exit,
+        .owner = THIS_MODULE,
+};
+
+/**
+ * nforce2_detect_chipset - detect the Southbridge which contains FSB PLL logic
+ *
+ * Detects nForce2 A2 and C1 stepping
+ * 
+ */
+static unsigned int nforce2_detect_chipset(void)
+{
+        u8 revision;
+
+        nforce2_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA,
+                                             PCI_DEVICE_ID_NVIDIA_NFORCE2,
+                                             PCI_ANY_ID,
+                                             PCI_ANY_ID,
+                                             NULL);
+
+        if (nforce2_chipset_dev == NULL)
+                return -ENODEV;
+
+        pci_read_config_byte(nforce2_chipset_dev, PCI_REVISION_ID, &revision);
+
+        printk(KERN_INFO "cpufreq: Detected nForce2 chipset revision %X\n",
+               revision);
+        printk(KERN_INFO
+               "cpufreq: FSB changing is maybe unstable and can lead to crashes and data loss.\n");
+
+        return 0;
+}
+
+/**
+ * nforce2_init - initializes the nForce2 CPUFreq driver
+ *
+ * Initializes the nForce2 FSB support. Returns -ENODEV on unsupported
+ * devices, -EINVAL on problems during initiatization, and zero on
+ * success.
+ */
+static int __init nforce2_init(void)
+{
+        /* TODO: do we need to detect the processor? */
+
+        /* detect chipset */
+        if (nforce2_detect_chipset()) {
+                printk(KERN_ERR "cpufreq: No nForce2 chipset.\n");
+                return -ENODEV;
+        }
+
+        return cpufreq_register_driver(&nforce2_driver);
+}
+
+/**
+ * nforce2_exit - unregisters cpufreq module
+ *
+ *   Unregisters nForce2 FSB change support.
+ */
+static void __exit nforce2_exit(void)
+{
+        cpufreq_unregister_driver(&nforce2_driver);
+}
+
+module_init(nforce2_init);
+module_exit(nforce2_exit);
+
diff --git a/arch/i386/kernel/cpu/cpufreq/elanfreq.c b/arch/i386/kernel/cpu/cpufreq/elanfreq.c
new file mode 100644
index 000000000000..3f7caa4ae6d6
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/elanfreq.c
@@ -0,0 +1,312 @@
+/*
+ *      elanfreq:       cpufreq driver for the AMD ELAN family
+ *
+ *      (c) Copyright 2002 Robert Schwebel <r.schwebel@pengutronix.de>
+ *
+ *      Parts of this code are (c) Sven Geggus <sven@geggus.net> 
+ *
+ *      All Rights Reserved. 
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version. 
+ *
+ *      2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/cpufreq.h>
+
+#include <asm/msr.h>
+#include <asm/timex.h>
+#include <asm/io.h>
+
+#define REG_CSCIR 0x22          /* Chip Setup and Control Index Register    */
+#define REG_CSCDR 0x23          /* Chip Setup and Control Data  Register    */
+
+/* Module parameter */
+static int max_freq;
+
+struct s_elan_multiplier {
+        int clock;              /* frequency in kHz                         */
+        int val40h;             /* PMU Force Mode register                  */
+        int val80h;             /* CPU Clock Speed Register                 */
+};
+
+/*
+ * It is important that the frequencies 
+ * are listed in ascending order here!
+ */
+struct s_elan_multiplier elan_multiplier[] = {
+        {1000,  0x02,   0x18},
+        {2000,  0x02,   0x10},
+        {4000,  0x02,   0x08},
+        {8000,  0x00,   0x00},
+        {16000, 0x00,   0x02},
+        {33000, 0x00,   0x04},
+        {66000, 0x01,   0x04},
+        {99000, 0x01,   0x05}
+};
+
+static struct cpufreq_frequency_table elanfreq_table[] = {
+        {0,     1000},
+        {1,     2000},
+        {2,     4000},
+        {3,     8000},
+        {4,     16000},
+        {5,     33000},
+        {6,     66000},
+        {7,     99000},
+        {0,     CPUFREQ_TABLE_END},
+};
+
+
+/**
+ *      elanfreq_get_cpu_frequency: determine current cpu speed
+ *
+ *      Finds out at which frequency the CPU of the Elan SOC runs
+ *      at the moment. Frequencies from 1 to 33 MHz are generated 
+ *      the normal way, 66 and 99 MHz are called "Hyperspeed Mode"
+ *      and have the rest of the chip running with 33 MHz. 
+ */
+
+static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu)
+{
+        u8 clockspeed_reg;    /* Clock Speed Register */
+        
+        local_irq_disable();
+        outb_p(0x80,REG_CSCIR);
+        clockspeed_reg = inb_p(REG_CSCDR);
+        local_irq_enable();
+
+        if ((clockspeed_reg & 0xE0) == 0xE0) { return 0; }
+
+        /* Are we in CPU clock multiplied mode (66/99 MHz)? */
+        if ((clockspeed_reg & 0xE0) == 0xC0) {
+                if ((clockspeed_reg & 0x01) == 0) {
+                        return 66000;
+                } else {
+                        return 99000;             
+                }
+        }
+
+        /* 33 MHz is not 32 MHz... */
+        if ((clockspeed_reg & 0xE0)==0xA0)
+                return 33000;
+
+        return ((1<<((clockspeed_reg & 0xE0) >> 5)) * 1000);
+}
+
+
+/**
+ *      elanfreq_set_cpu_frequency: Change the CPU core frequency
+ *      @cpu: cpu number
+ *      @freq: frequency in kHz
+ *
+ *      This function takes a frequency value and changes the CPU frequency 
+ *      according to this. Note that the frequency has to be checked by
+ *      elanfreq_validatespeed() for correctness!
+ *      
+ *      There is no return value. 
+ */
+
+static void elanfreq_set_cpu_state (unsigned int state) {
+
+        struct cpufreq_freqs    freqs;
+
+        freqs.old = elanfreq_get_cpu_frequency(0);
+        freqs.new = elan_multiplier[state].clock;
+        freqs.cpu = 0; /* elanfreq.c is UP only driver */
+        
+        cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+        printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n",elan_multiplier[state].clock);
+
+
+        /* 
+         * Access to the Elan's internal registers is indexed via    
+         * 0x22: Chip Setup & Control Register Index Register (CSCI) 
+         * 0x23: Chip Setup & Control Register Data  Register (CSCD) 
+         *
+         */
+
+        /* 
+         * 0x40 is the Power Management Unit's Force Mode Register. 
+         * Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency)
+         */
+
+        local_irq_disable();
+        outb_p(0x40,REG_CSCIR);         /* Disable hyperspeed mode          */
+        outb_p(0x00,REG_CSCDR);
+        local_irq_enable();             /* wait till internal pipelines and */
+        udelay(1000);                   /* buffers have cleaned up          */
+
+        local_irq_disable();
+
+        /* now, set the CPU clock speed register (0x80) */
+        outb_p(0x80,REG_CSCIR);
+        outb_p(elan_multiplier[state].val80h,REG_CSCDR);
+
+        /* now, the hyperspeed bit in PMU Force Mode Register (0x40) */
+        outb_p(0x40,REG_CSCIR);
+        outb_p(elan_multiplier[state].val40h,REG_CSCDR);
+        udelay(10000);
+        local_irq_enable();
+
+        cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+};
+
+
+/**
+ *      elanfreq_validatespeed: test if frequency range is valid
+ *      @policy: the policy to validate
+ *
+ *      This function checks if a given frequency range in kHz is valid 
+ *      for the hardware supported by the driver. 
+ */
+
+static int elanfreq_verify (struct cpufreq_policy *policy)
+{
+        return cpufreq_frequency_table_verify(policy, &elanfreq_table[0]);
+}
+
+static int elanfreq_target (struct cpufreq_policy *policy, 
+                            unsigned int target_freq, 
+                            unsigned int relation)
+{
+        unsigned int    newstate = 0;
+
+        if (cpufreq_frequency_table_target(policy, &elanfreq_table[0], target_freq, relation, &newstate))
+                return -EINVAL;
+
+        elanfreq_set_cpu_state(newstate);
+
+        return 0;
+}
+
+
+/*
+ *      Module init and exit code
+ */
+
+static int elanfreq_cpu_init(struct cpufreq_policy *policy)
+{
+        struct cpuinfo_x86 *c = cpu_data;
+        unsigned int i;
+        int result;
+
+        /* capability check */
+        if ((c->x86_vendor != X86_VENDOR_AMD) ||
+            (c->x86 != 4) || (c->x86_model!=10))
+                return -ENODEV;
+
+        /* max freq */
+        if (!max_freq)
+                max_freq = elanfreq_get_cpu_frequency(0);
+
+        /* table init */
+        for (i=0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) {
+                if (elanfreq_table[i].frequency > max_freq)
+                        elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+        }
+
+        /* cpuinfo and default policy values */
+        policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+        policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+        policy->cur = elanfreq_get_cpu_frequency(0);
+
+        result = cpufreq_frequency_table_cpuinfo(policy, elanfreq_table);
+        if (result)
+                return (result);
+
+        cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu);
+
+        return 0;
+}
+
+
+static int elanfreq_cpu_exit(struct cpufreq_policy *policy)
+{
+        cpufreq_frequency_table_put_attr(policy->cpu);
+        return 0;
+}
+
+
+#ifndef MODULE
+/**
+ * elanfreq_setup - elanfreq command line parameter parsing
+ *
+ * elanfreq command line parameter.  Use:
+ *  elanfreq=66000
+ * to set the maximum CPU frequency to 66 MHz. Note that in
+ * case you do not give this boot parameter, the maximum
+ * frequency will fall back to _current_ CPU frequency which
+ * might be lower. If you build this as a module, use the
+ * max_freq module parameter instead.
+ */
+static int __init elanfreq_setup(char *str)
+{
+        max_freq = simple_strtoul(str, &str, 0);
+        printk(KERN_WARNING "You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n");
+        return 1;
+}
+__setup("elanfreq=", elanfreq_setup);
+#endif
+
+
+static struct freq_attr* elanfreq_attr[] = {
+        &cpufreq_freq_attr_scaling_available_freqs,
+        NULL,
+};
+
+
+static struct cpufreq_driver elanfreq_driver = {
+        .get            = elanfreq_get_cpu_frequency,
+        .verify         = elanfreq_verify,
+        .target         = elanfreq_target,
+        .init           = elanfreq_cpu_init,
+        .exit           = elanfreq_cpu_exit,
+        .name           = "elanfreq",
+        .owner          = THIS_MODULE,
+        .attr           = elanfreq_attr,
+};
+
+
+static int __init elanfreq_init(void) 
+{       
+        struct cpuinfo_x86 *c = cpu_data;
+
+        /* Test if we have the right hardware */
+        if ((c->x86_vendor != X86_VENDOR_AMD) ||
+                (c->x86 != 4) || (c->x86_model!=10))
+        {
+                printk(KERN_INFO "elanfreq: error: no Elan processor found!\n");
+                return -ENODEV;
+        }
+        
+        return cpufreq_register_driver(&elanfreq_driver);
+}
+
+
+static void __exit elanfreq_exit(void) 
+{
+        cpufreq_unregister_driver(&elanfreq_driver);
+}
+
+
+module_param (max_freq, int, 0444);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, Sven Geggus <sven@geggus.net>");
+MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs");
+
+module_init(elanfreq_init);
+module_exit(elanfreq_exit);
+
diff --git a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c
new file mode 100644
index 000000000000..1a49adb1f4a6
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c
@@ -0,0 +1,502 @@
+/*
+ *      Cyrix MediaGX and NatSemi Geode Suspend Modulation
+ *      (C) 2002 Zwane Mwaikambo <zwane@commfireservices.com>
+ *      (C) 2002 Hiroshi Miura   <miura@da-cha.org>
+ *      All Rights Reserved
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      version 2 as published by the Free Software Foundation 
+ *
+ *      The author(s) of this software shall not be held liable for damages
+ *      of any nature resulting due to the use of this software. This
+ *      software is provided AS-IS with no warranties.
+ *      
+ * Theoritical note:
+ *
+ *      (see Geode(tm) CS5530 manual (rev.4.1) page.56)
+ *
+ *      CPU frequency control on NatSemi Geode GX1/GXLV processor and CS55x0
+ *      are based on Suspend Moduration.
+ *
+ *      Suspend Modulation works by asserting and de-asserting the SUSP# pin
+ *      to CPU(GX1/GXLV) for configurable durations. When asserting SUSP#
+ *      the CPU enters an idle state. GX1 stops its core clock when SUSP# is 
+ *      asserted then power consumption is reduced.
+ *
+ *      Suspend Modulation's OFF/ON duration are configurable 
+ *      with 'Suspend Modulation OFF Count Register'
+ *      and 'Suspend Modulation ON Count Register'.
+ *      These registers are 8bit counters that represent the number of 
+ *      32us intervals which the SUSP# pin is asserted(ON)/de-asserted(OFF)
+ *      to the processor.
+ *
+ *      These counters define a ratio which is the effective frequency 
+ *      of operation of the system.
+ *
+ *                             OFF Count
+ *      F_eff = Fgx * ----------------------
+ *                      OFF Count + ON Count
+ *
+ *      0 <= On Count, Off Count <= 255
+ *
+ *      From these limits, we can get register values 
+ *
+ *      off_duration + on_duration <= MAX_DURATION
+ *      on_duration = off_duration * (stock_freq - freq) / freq
+ *
+ *      off_duration  =  (freq * DURATION) / stock_freq 
+ *      on_duration = DURATION - off_duration 
+ *
+ *
+ *---------------------------------------------------------------------------
+ *
+ * ChangeLog:
+ *      Dec. 12, 2003   Hiroshi Miura <miura@da-cha.org>
+ *              - fix on/off register mistake
+ *              - fix cpu_khz calc when it stops cpu modulation.
+ *
+ *      Dec. 11, 2002   Hiroshi Miura <miura@da-cha.org>
+ *              - rewrite for Cyrix MediaGX Cx5510/5520 and 
+ *                NatSemi Geode Cs5530(A).
+ *
+ *      Jul. ??, 2002  Zwane Mwaikambo <zwane@commfireservices.com>
+ *              - cs5530_mod patch for 2.4.19-rc1.
+ *
+ *---------------------------------------------------------------------------
+ *
+ * Todo
+ *      Test on machines with 5510, 5530, 5530A
+ */
+
+/************************************************************************
+ *                      Suspend Modulation - Definitions                *
+ ************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h> 
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/cpufreq.h>
+#include <linux/pci.h>
+#include <asm/processor.h> 
+#include <asm/errno.h>
+
+/* PCI config registers, all at F0 */
+#define PCI_PMER1              0x80    /* power management enable register 1 */
+#define PCI_PMER2              0x81    /* power management enable register 2 */
+#define PCI_PMER3              0x82    /* power management enable register 3 */
+#define PCI_IRQTC              0x8c    /* irq speedup timer counter register:typical 2 to 4ms */
+#define PCI_VIDTC              0x8d    /* video speedup timer counter register: typical 50 to 100ms */
+#define PCI_MODOFF             0x94    /* suspend modulation OFF counter register, 1 = 32us */
+#define PCI_MODON              0x95    /* suspend modulation ON counter register */
+#define PCI_SUSCFG             0x96    /* suspend configuration register */
+
+/* PMER1 bits */
+#define GPM                    (1<<0)  /* global power management */
+#define GIT                    (1<<1)  /* globally enable PM device idle timers */
+#define GTR                    (1<<2)  /* globally enable IO traps */
+#define IRQ_SPDUP              (1<<3)  /* disable clock throttle during interrupt handling */
+#define VID_SPDUP              (1<<4)  /* disable clock throttle during vga video handling */
+
+/* SUSCFG bits */
+#define SUSMOD                 (1<<0)  /* enable/disable suspend modulation */
+/* the belows support only with cs5530 (after rev.1.2)/cs5530A */ 
+#define SMISPDUP               (1<<1)  /* select how SMI re-enable suspend modulation: */
+                                       /* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */
+#define SUSCFG                 (1<<2)  /* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */
+/* the belows support only with cs5530A */ 
+#define PWRSVE_ISA             (1<<3)  /* stop ISA clock  */
+#define PWRSVE                 (1<<4)  /* active idle */
+
+struct gxfreq_params {
+        u8 on_duration;
+        u8 off_duration;
+        u8 pci_suscfg;
+        u8 pci_pmer1;
+        u8 pci_pmer2;
+        u8 pci_rev;
+        struct pci_dev *cs55x0;
+};
+
+static struct gxfreq_params *gx_params;
+static int stock_freq;
+
+/* PCI bus clock - defaults to 30.000 if cpu_khz is not available */
+static int pci_busclk = 0;
+module_param (pci_busclk, int, 0444);
+
+/* maximum duration for which the cpu may be suspended
+ * (32us * MAX_DURATION). If no parameter is given, this defaults
+ * to 255. 
+ * Note that this leads to a maximum of 8 ms(!) where the CPU clock
+ * is suspended -- processing power is just 0.39% of what it used to be,
+ * though. 781.25 kHz(!) for a 200 MHz processor -- wow. */
+static int max_duration = 255;
+module_param (max_duration, int, 0444);
+
+/* For the default policy, we want at least some processing power
+ * - let's say 5%. (min = maxfreq / POLICY_MIN_DIV)
+ */
+#define POLICY_MIN_DIV 20
+
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "gx-suspmod", msg)
+
+/**
+ *      we can detect a core multipiler from dir0_lsb 
+ *      from GX1 datasheet p.56, 
+ *         MULT[3:0]:
+ *         0000 = SYSCLK multiplied by 4 (test only)
+ *         0001 = SYSCLK multiplied by 10
+ *         0010 = SYSCLK multiplied by 4
+ *         0011 = SYSCLK multiplied by 6
+ *         0100 = SYSCLK multiplied by 9
+ *         0101 = SYSCLK multiplied by 5
+ *         0110 = SYSCLK multiplied by 7
+ *         0111 = SYSCLK multiplied by 8
+ *              of 33.3MHz
+ **/
+static int gx_freq_mult[16] = {
+                4, 10, 4, 6, 9, 5, 7, 8,
+                0, 0, 0, 0, 0, 0, 0, 0
+};
+
+
+/****************************************************************
+ *      Low Level chipset interface                             *
+ ****************************************************************/
+static struct pci_device_id gx_chipset_tbl[] __initdata = {
+        { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, PCI_ANY_ID, PCI_ANY_ID },
+        { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, PCI_ANY_ID, PCI_ANY_ID },
+        { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, PCI_ANY_ID, PCI_ANY_ID },
+        { 0, },
+};
+
+/**
+ *     gx_detect_chipset:
+ *
+ **/
+static __init struct pci_dev *gx_detect_chipset(void)
+{
+        struct pci_dev *gx_pci = NULL;
+
+        /* check if CPU is a MediaGX or a Geode. */
+        if ((current_cpu_data.x86_vendor != X86_VENDOR_NSC) && 
+            (current_cpu_data.x86_vendor != X86_VENDOR_CYRIX)) {
+                dprintk("error: no MediaGX/Geode processor found!\n");
+                return NULL;            
+        }
+
+        /* detect which companion chip is used */
+        while ((gx_pci = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, gx_pci)) != NULL) {
+                if ((pci_match_device (gx_chipset_tbl, gx_pci)) != NULL) {
+                        return gx_pci;
+                }
+        }
+
+        dprintk("error: no supported chipset found!\n");
+        return NULL;
+}
+
+/**
+ *      gx_get_cpuspeed:
+ *
+ * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi Geode CPU runs.
+ */
+static unsigned int gx_get_cpuspeed(unsigned int cpu)
+{
+        if ((gx_params->pci_suscfg & SUSMOD) == 0) 
+                return stock_freq;
+
+        return (stock_freq * gx_params->off_duration) 
+                / (gx_params->on_duration + gx_params->off_duration);
+}
+
+/**
+ *      gx_validate_speed:
+ *      determine current cpu speed
+ *       
+**/
+
+static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off_duration)
+{
+        unsigned int i;
+        u8 tmp_on, tmp_off;
+        int old_tmp_freq = stock_freq;
+        int tmp_freq;
+
+        *off_duration=1;
+        *on_duration=0;
+
+        for (i=max_duration; i>0; i--) {
+                tmp_off = ((khz * i) / stock_freq) & 0xff; 
+                tmp_on = i - tmp_off;
+                tmp_freq = (stock_freq * tmp_off) / i;
+                /* if this relation is closer to khz, use this. If it's equal,
+                 * prefer it, too - lower latency */
+                if (abs(tmp_freq - khz) <= abs(old_tmp_freq - khz)) {
+                        *on_duration = tmp_on;
+                        *off_duration = tmp_off;
+                        old_tmp_freq = tmp_freq;
+                }
+        }
+
+        return old_tmp_freq;
+}
+
+
+/**
+ *      gx_set_cpuspeed:
+ *              set cpu speed in khz.
+ **/
+
+static void gx_set_cpuspeed(unsigned int khz)
+{
+        u8 suscfg, pmer1;
+        unsigned int new_khz;
+        unsigned long flags;
+        struct cpufreq_freqs freqs;
+
+
+        freqs.cpu = 0;
+        freqs.old = gx_get_cpuspeed(0);
+
+        new_khz = gx_validate_speed(khz, &gx_params->on_duration, &gx_params->off_duration);
+
+        freqs.new = new_khz;
+
+        cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+        local_irq_save(flags);
+
+        if (new_khz != stock_freq) {  /* if new khz == 100% of CPU speed, it is special case */
+                switch (gx_params->cs55x0->device) {
+                case PCI_DEVICE_ID_CYRIX_5530_LEGACY:
+                        pmer1 = gx_params->pci_pmer1 | IRQ_SPDUP | VID_SPDUP;
+                        /* FIXME: need to test other values -- Zwane,Miura */
+                        pci_write_config_byte(gx_params->cs55x0, PCI_IRQTC, 4); /* typical 2 to 4ms */
+                        pci_write_config_byte(gx_params->cs55x0, PCI_VIDTC, 100);/* typical 50 to 100ms */
+                        pci_write_config_byte(gx_params->cs55x0, PCI_PMER1, pmer1);
+
+                        if (gx_params->pci_rev < 0x10) {   /* CS5530(rev 1.2, 1.3) */
+                                suscfg = gx_params->pci_suscfg | SUSMOD;
+                        } else {                           /* CS5530A,B.. */
+                                suscfg = gx_params->pci_suscfg | SUSMOD | PWRSVE;
+                        }
+                        break;
+                case PCI_DEVICE_ID_CYRIX_5520:
+                case PCI_DEVICE_ID_CYRIX_5510:
+                        suscfg = gx_params->pci_suscfg | SUSMOD;
+                        break;
+                default:
+                        local_irq_restore(flags);
+                        dprintk("fatal: try to set unknown chipset.\n");
+                        return;
+                }
+        } else {
+                suscfg = gx_params->pci_suscfg & ~(SUSMOD);
+                gx_params->off_duration = 0;
+                gx_params->on_duration = 0;
+                dprintk("suspend modulation disabled: cpu runs 100 percent speed.\n");
+        }
+
+        pci_write_config_byte(gx_params->cs55x0, PCI_MODOFF, gx_params->off_duration);
+        pci_write_config_byte(gx_params->cs55x0, PCI_MODON, gx_params->on_duration);
+
+        pci_write_config_byte(gx_params->cs55x0, PCI_SUSCFG, suscfg);
+        pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg);
+
+        local_irq_restore(flags);
+
+        gx_params->pci_suscfg = suscfg;
+
+        cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+        dprintk("suspend modulation w/ duration of ON:%d us, OFF:%d us\n",
+                gx_params->on_duration * 32, gx_params->off_duration * 32);
+        dprintk("suspend modulation w/ clock speed: %d kHz.\n", freqs.new); 
+}
+
+/****************************************************************
+ *             High level functions                             *
+ ****************************************************************/
+
+/*
+ *      cpufreq_gx_verify: test if frequency range is valid 
+ *
+ *      This function checks if a given frequency range in kHz is valid 
+ *      for the hardware supported by the driver. 
+ */
+
+static int cpufreq_gx_verify(struct cpufreq_policy *policy)
+{
+        unsigned int tmp_freq = 0;
+        u8 tmp1, tmp2;
+
+        if (!stock_freq || !policy)
+                return -EINVAL;
+
+        policy->cpu = 0;
+        cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq);
+
+        /* it needs to be assured that at least one supported frequency is
+         * within policy->min and policy->max. If it is not, policy->max
+         * needs to be increased until one freuqency is supported.
+         * policy->min may not be decreased, though. This way we guarantee a 
+         * specific processing capacity.
+         */
+        tmp_freq = gx_validate_speed(policy->min, &tmp1, &tmp2);
+        if (tmp_freq < policy->min) 
+                tmp_freq += stock_freq / max_duration;
+        policy->min = tmp_freq;
+        if (policy->min > policy->max) 
+                policy->max = tmp_freq;
+        tmp_freq = gx_validate_speed(policy->max, &tmp1, &tmp2);
+        if (tmp_freq > policy->max)
+                tmp_freq -= stock_freq / max_duration;
+        policy->max = tmp_freq;
+        if (policy->max < policy->min)
+                policy->max = policy->min;
+        cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq);
+        
+        return 0;
+}
+
+/*
+ *      cpufreq_gx_target:  
+ *
+ */
+static int cpufreq_gx_target(struct cpufreq_policy *policy,
+                             unsigned int target_freq,
+                             unsigned int relation)
+{
+        u8 tmp1, tmp2;
+        unsigned int tmp_freq;
+
+        if (!stock_freq || !policy)
+                return -EINVAL;
+
+        policy->cpu = 0;
+
+        tmp_freq = gx_validate_speed(target_freq, &tmp1, &tmp2);
+        while (tmp_freq < policy->min) {
+                tmp_freq += stock_freq / max_duration;
+                tmp_freq = gx_validate_speed(tmp_freq, &tmp1, &tmp2);
+        }
+        while (tmp_freq > policy->max) {
+                tmp_freq -= stock_freq / max_duration;
+                tmp_freq = gx_validate_speed(tmp_freq, &tmp1, &tmp2);
+        }
+
+        gx_set_cpuspeed(tmp_freq);
+
+        return 0;
+}
+
+static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy)
+{
+        unsigned int maxfreq, curfreq;
+
+        if (!policy || policy->cpu != 0)
+                return -ENODEV;
+
+        /* determine maximum frequency */
+        if (pci_busclk) {
+                maxfreq = pci_busclk * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f];
+        } else if (cpu_khz) {
+                maxfreq = cpu_khz;
+        } else {
+                maxfreq = 30000 * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f];
+        }
+        stock_freq = maxfreq;
+        curfreq = gx_get_cpuspeed(0);
+
+        dprintk("cpu max frequency is %d.\n", maxfreq);
+        dprintk("cpu current frequency is %dkHz.\n",curfreq);
+
+        /* setup basic struct for cpufreq API */
+        policy->cpu = 0;
+
+        if (max_duration < POLICY_MIN_DIV)
+                policy->min = maxfreq / max_duration;
+        else
+                policy->min = maxfreq / POLICY_MIN_DIV;
+        policy->max = maxfreq;
+        policy->cur = curfreq;
+        policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+        policy->cpuinfo.min_freq = maxfreq / max_duration;
+        policy->cpuinfo.max_freq = maxfreq;
+        policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+
+        return 0;
+}
+
+/* 
+ * cpufreq_gx_init:
+ *   MediaGX/Geode GX initialize cpufreq driver
+ */
+static struct cpufreq_driver gx_suspmod_driver = {
+        .get            = gx_get_cpuspeed,
+        .verify         = cpufreq_gx_verify,
+        .target         = cpufreq_gx_target,
+        .init           = cpufreq_gx_cpu_init,
+        .name           = "gx-suspmod",
+        .owner          = THIS_MODULE,
+};
+
+static int __init cpufreq_gx_init(void)
+{
+        int ret;
+        struct gxfreq_params *params;
+        struct pci_dev *gx_pci;
+        u32 class_rev;
+
+        /* Test if we have the right hardware */
+        if ((gx_pci = gx_detect_chipset()) == NULL) 
+                return -ENODEV;
+
+        /* check whether module parameters are sane */
+        if (max_duration > 0xff)
+                max_duration = 0xff;
+
+        dprintk("geode suspend modulation available.\n");
+
+        params = kmalloc(sizeof(struct gxfreq_params), GFP_KERNEL);
+        if (params == NULL)
+                return -ENOMEM;
+        memset(params, 0, sizeof(struct gxfreq_params));
+
+        params->cs55x0 = gx_pci;
+        gx_params = params;
+
+        /* keep cs55x0 configurations */
+        pci_read_config_byte(params->cs55x0, PCI_SUSCFG, &(params->pci_suscfg));
+        pci_read_config_byte(params->cs55x0, PCI_PMER1, &(params->pci_pmer1));
+        pci_read_config_byte(params->cs55x0, PCI_PMER2, &(params->pci_pmer2));
+        pci_read_config_byte(params->cs55x0, PCI_MODON, &(params->on_duration));
+        pci_read_config_byte(params->cs55x0, PCI_MODOFF, &(params->off_duration));
+        pci_read_config_dword(params->cs55x0, PCI_CLASS_REVISION, &class_rev);
+        params->pci_rev = class_rev && 0xff;
+
+        if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) { 
+                kfree(params);
+                return ret;                   /* register error! */
+        }
+
+        return 0;
+}
+
+static void __exit cpufreq_gx_exit(void)
+{
+        cpufreq_unregister_driver(&gx_suspmod_driver);
+        pci_dev_put(gx_params->cs55x0);
+        kfree(gx_params);
+}
+
+MODULE_AUTHOR ("Hiroshi Miura <miura@da-cha.org>");
+MODULE_DESCRIPTION ("Cpufreq driver for Cyrix MediaGX and NatSemi Geode");
+MODULE_LICENSE ("GPL");
+
+module_init(cpufreq_gx_init);
+module_exit(cpufreq_gx_exit);
+
diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c
new file mode 100644
index 000000000000..ab0f9f5aac11
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c
@@ -0,0 +1,658 @@
+/*
+ *  (C) 2001-2004  Dave Jones. <davej@codemonkey.org.uk>
+ *  (C) 2002  Padraig Brady. <padraig@antefacto.com>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *  Based upon datasheets & sample CPUs kindly provided by VIA.
+ *
+ *  VIA have currently 3 different versions of Longhaul.
+ *  Version 1 (Longhaul) uses the BCR2 MSR at 0x1147.
+ *   It is present only in Samuel 1 (C5A), Samuel 2 (C5B) stepping 0.
+ *  Version 2 of longhaul is the same as v1, but adds voltage scaling.
+ *   Present in Samuel 2 (steppings 1-7 only) (C5B), and Ezra (C5C)
+ *   voltage scaling support has currently been disabled in this driver
+ *   until we have code that gets it right.
+ *  Version 3 of longhaul got renamed to Powersaver and redesigned
+ *   to use the POWERSAVER MSR at 0x110a.
+ *   It is present in Ezra-T (C5M), Nehemiah (C5X) and above.
+ *   It's pretty much the same feature wise to longhaul v2, though
+ *   there is provision for scaling FSB too, but this doesn't work
+ *   too well in practice so we don't even try to use this.
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+#include <asm/msr.h>
+#include <asm/timex.h>
+#include <asm/io.h>
+
+#include "longhaul.h"
+
+#define PFX "longhaul: "
+
+#define TYPE_LONGHAUL_V1        1
+#define TYPE_LONGHAUL_V2        2
+#define TYPE_POWERSAVER         3
+
+#define CPU_SAMUEL      1
+#define CPU_SAMUEL2     2
+#define CPU_EZRA        3
+#define CPU_EZRA_T      4
+#define CPU_NEHEMIAH    5
+
+static int cpu_model;
+static unsigned int numscales=16, numvscales;
+static unsigned int fsb;
+static int minvid, maxvid;
+static unsigned int minmult, maxmult;
+static int can_scale_voltage;
+static int vrmrev;
+
+/* Module parameters */
+static int dont_scale_voltage;
+
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longhaul", msg)
+
+
+#define __hlt()     __asm__ __volatile__("hlt": : :"memory")
+
+/* Clock ratios multiplied by 10 */
+static int clock_ratio[32];
+static int eblcr_table[32];
+static int voltage_table[32];
+static unsigned int highest_speed, lowest_speed; /* kHz */
+static int longhaul_version;
+static struct cpufreq_frequency_table *longhaul_table;
+
+#ifdef CONFIG_CPU_FREQ_DEBUG
+static char speedbuffer[8];
+
+static char *print_speed(int speed)
+{
+        if (speed > 1000) {
+                if (speed%1000 == 0)
+                        sprintf (speedbuffer, "%dGHz", speed/1000);
+                else
+                        sprintf (speedbuffer, "%d.%dGHz", speed/1000, (speed%1000)/100);
+        } else
+                sprintf (speedbuffer, "%dMHz", speed);
+
+        return speedbuffer;
+}
+#endif
+
+
+static unsigned int calc_speed(int mult)
+{
+        int khz;
+        khz = (mult/10)*fsb;
+        if (mult%10)
+                khz += fsb/2;
+        khz *= 1000;
+        return khz;
+}
+
+
+static int longhaul_get_cpu_mult(void)
+{
+        unsigned long invalue=0,lo, hi;
+
+        rdmsr (MSR_IA32_EBL_CR_POWERON, lo, hi);
+        invalue = (lo & (1<<22|1<<23|1<<24|1<<25)) >>22;
+        if (longhaul_version==TYPE_LONGHAUL_V2 || longhaul_version==TYPE_POWERSAVER) {
+                if (lo & (1<<27))
+                        invalue+=16;
+        }
+        return eblcr_table[invalue];
+}
+
+
+static void do_powersaver(union msr_longhaul *longhaul,
+                        unsigned int clock_ratio_index)
+{
+        int version;
+
+        switch (cpu_model) {
+        case CPU_EZRA_T:
+                version = 3;
+                break;
+        case CPU_NEHEMIAH:
+                version = 0xf;
+                break;
+        default:
+                return;
+        }
+
+        rdmsrl(MSR_VIA_LONGHAUL, longhaul->val);
+        longhaul->bits.SoftBusRatio = clock_ratio_index & 0xf;
+        longhaul->bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4;
+        longhaul->bits.EnableSoftBusRatio = 1;
+        longhaul->bits.RevisionKey = 0;
+        local_irq_disable();
+        wrmsrl(MSR_VIA_LONGHAUL, longhaul->val);
+        local_irq_enable();
+        __hlt();
+
+        rdmsrl(MSR_VIA_LONGHAUL, longhaul->val);
+        longhaul->bits.EnableSoftBusRatio = 0;
+        longhaul->bits.RevisionKey = version;
+        local_irq_disable();
+        wrmsrl(MSR_VIA_LONGHAUL, longhaul->val);
+        local_irq_enable();
+}
+
+/**
+ * longhaul_set_cpu_frequency()
+ * @clock_ratio_index : bitpattern of the new multiplier.
+ *
+ * Sets a new clock ratio.
+ */
+
+static void longhaul_setstate(unsigned int clock_ratio_index)
+{
+        int speed, mult;
+        struct cpufreq_freqs freqs;
+        union msr_longhaul longhaul;
+        union msr_bcr2 bcr2;
+        static unsigned int old_ratio=-1;
+
+        if (old_ratio == clock_ratio_index)
+                return;
+        old_ratio = clock_ratio_index;
+
+        mult = clock_ratio[clock_ratio_index];
+        if (mult == -1)
+                return;
+
+        speed = calc_speed(mult);
+        if ((speed > highest_speed) || (speed < lowest_speed))
+                return;
+
+        freqs.old = calc_speed(longhaul_get_cpu_mult());
+        freqs.new = speed;
+        freqs.cpu = 0; /* longhaul.c is UP only driver */
+
+        cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+        dprintk ("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n",
+                        fsb, mult/10, mult%10, print_speed(speed/1000));
+
+        switch (longhaul_version) {
+
+        /*
+         * Longhaul v1. (Samuel[C5A] and Samuel2 stepping 0[C5B])
+         * Software controlled multipliers only.
+         *
+         * *NB* Until we get voltage scaling working v1 & v2 are the same code.
+         * Longhaul v2 appears in Samuel2 Steppings 1->7 [C5b] and Ezra [C5C]
+         */
+        case TYPE_LONGHAUL_V1:
+        case TYPE_LONGHAUL_V2:
+                rdmsrl (MSR_VIA_BCR2, bcr2.val);
+                /* Enable software clock multiplier */
+                bcr2.bits.ESOFTBF = 1;
+                bcr2.bits.CLOCKMUL = clock_ratio_index;
+                local_irq_disable();
+                wrmsrl (MSR_VIA_BCR2, bcr2.val);
+                local_irq_enable();
+
+                __hlt();
+
+                /* Disable software clock multiplier */
+                rdmsrl (MSR_VIA_BCR2, bcr2.val);
+                bcr2.bits.ESOFTBF = 0;
+                local_irq_disable();
+                wrmsrl (MSR_VIA_BCR2, bcr2.val);
+                local_irq_enable();
+                break;
+
+        /*
+         * Longhaul v3 (aka Powersaver). (Ezra-T [C5M] & Nehemiah [C5N])
+         * We can scale voltage with this too, but that's currently
+         * disabled until we come up with a decent 'match freq to voltage'
+         * algorithm.
+         * When we add voltage scaling, we will also need to do the
+         * voltage/freq setting in order depending on the direction
+         * of scaling (like we do in powernow-k7.c)
+         * Nehemiah can do FSB scaling too, but this has never been proven
+         * to work in practice.
+         */
+        case TYPE_POWERSAVER:
+                do_powersaver(&longhaul, clock_ratio_index);
+                break;
+        }
+
+        cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+}
+
+/*
+ * Centaur decided to make life a little more tricky.
+ * Only longhaul v1 is allowed to read EBLCR BSEL[0:1].
+ * Samuel2 and above have to try and guess what the FSB is.
+ * We do this by assuming we booted at maximum multiplier, and interpolate
+ * between that value multiplied by possible FSBs and cpu_mhz which
+ * was calculated at boot time. Really ugly, but no other way to do this.
+ */
+
+#define ROUNDING        0xf
+
+static int _guess(int guess)
+{
+        int target;
+
+        target = ((maxmult/10)*guess);
+        if (maxmult%10 != 0)
+                target += (guess/2);
+        target += ROUNDING/2;
+        target &= ~ROUNDING;
+        return target;
+}
+
+
+static int guess_fsb(void)
+{
+        int speed = (cpu_khz/1000);
+        int i;
+        int speeds[3] = { 66, 100, 133 };
+
+        speed += ROUNDING/2;
+        speed &= ~ROUNDING;
+
+        for (i=0; i<3; i++) {
+                if (_guess(speeds[i]) == speed)
+                        return speeds[i];
+        }
+        return 0;
+}
+
+
+static int __init longhaul_get_ranges(void)
+{
+        unsigned long invalue;
+        unsigned int multipliers[32]= {
+                50,30,40,100,55,35,45,95,90,70,80,60,120,75,85,65,
+                -1,110,120,-1,135,115,125,105,130,150,160,140,-1,155,-1,145 };
+        unsigned int j, k = 0;
+        union msr_longhaul longhaul;
+        unsigned long lo, hi;
+        unsigned int eblcr_fsb_table_v1[] = { 66, 133, 100, -1 };
+        unsigned int eblcr_fsb_table_v2[] = { 133, 100, -1, 66 };
+
+        switch (longhaul_version) {
+        case TYPE_LONGHAUL_V1:
+        case TYPE_LONGHAUL_V2:
+                /* Ugh, Longhaul v1 didn't have the min/max MSRs.
+                   Assume min=3.0x & max = whatever we booted at. */
+                minmult = 30;
+                maxmult = longhaul_get_cpu_mult();
+                rdmsr (MSR_IA32_EBL_CR_POWERON, lo, hi);
+                invalue = (lo & (1<<18|1<<19)) >>18;
+                if (cpu_model==CPU_SAMUEL || cpu_model==CPU_SAMUEL2)
+                        fsb = eblcr_fsb_table_v1[invalue];
+                else
+                        fsb = guess_fsb();
+                break;
+
+        case TYPE_POWERSAVER:
+                /* Ezra-T */
+                if (cpu_model==CPU_EZRA_T) {
+                        rdmsrl (MSR_VIA_LONGHAUL, longhaul.val);
+                        invalue = longhaul.bits.MaxMHzBR;
+                        if (longhaul.bits.MaxMHzBR4)
+                                invalue += 16;
+                        maxmult=multipliers[invalue];
+
+                        invalue = longhaul.bits.MinMHzBR;
+                        if (longhaul.bits.MinMHzBR4 == 1)
+                                minmult = 30;
+                        else
+                                minmult = multipliers[invalue];
+                        fsb = eblcr_fsb_table_v2[longhaul.bits.MaxMHzFSB];
+                        break;
+                }
+
+                /* Nehemiah */
+                if (cpu_model==CPU_NEHEMIAH) {
+                        rdmsrl (MSR_VIA_LONGHAUL, longhaul.val);
+
+                        /*
+                         * TODO: This code works, but raises a lot of questions.
+                         * - Some Nehemiah's seem to have broken Min/MaxMHzBR's.
+                         *   We get around this by using a hardcoded multiplier of 4.0x
+                         *   for the minimimum speed, and the speed we booted up at for the max.
+                         *   This is done in longhaul_get_cpu_mult() by reading the EBLCR register.
+                         * - According to some VIA documentation EBLCR is only
+                         *   in pre-Nehemiah C3s. How this still works is a mystery.
+                         *   We're possibly using something undocumented and unsupported,
+                         *   But it works, so we don't grumble.
+                         */
+                        minmult=40;
+                        maxmult=longhaul_get_cpu_mult();
+
+                        /* Starting with the 1.2GHz parts, theres a 200MHz bus. */
+                        if ((cpu_khz/1000) > 1200)
+                                fsb = 200;
+                        else
+                                fsb = eblcr_fsb_table_v2[longhaul.bits.MaxMHzFSB];
+                        break;
+                }
+        }
+
+        dprintk ("MinMult:%d.%dx MaxMult:%d.%dx\n",
+                 minmult/10, minmult%10, maxmult/10, maxmult%10);
+
+        if (fsb == -1) {
+                printk (KERN_INFO PFX "Invalid (reserved) FSB!\n");
+                return -EINVAL;
+        }
+
+        highest_speed = calc_speed(maxmult);
+        lowest_speed = calc_speed(minmult);
+        dprintk ("FSB:%dMHz  Lowest speed: %s   Highest speed:%s\n", fsb,
+                 print_speed(lowest_speed/1000), 
+                 print_speed(highest_speed/1000));
+
+        if (lowest_speed == highest_speed) {
+                printk (KERN_INFO PFX "highestspeed == lowest, aborting.\n");
+                return -EINVAL;
+        }
+        if (lowest_speed > highest_speed) {
+                printk (KERN_INFO PFX "nonsense! lowest (%d > %d) !\n",
+                        lowest_speed, highest_speed);
+                return -EINVAL;
+        }
+
+        longhaul_table = kmalloc((numscales + 1) * sizeof(struct cpufreq_frequency_table), GFP_KERNEL);
+        if(!longhaul_table)
+                return -ENOMEM;
+
+        for (j=0; j < numscales; j++) {
+                unsigned int ratio;
+                ratio = clock_ratio[j];
+                if (ratio == -1)
+                        continue;
+                if (ratio > maxmult || ratio < minmult)
+                        continue;
+                longhaul_table[k].frequency = calc_speed(ratio);
+                longhaul_table[k].index = j;
+                k++;
+        }
+
+        longhaul_table[k].frequency = CPUFREQ_TABLE_END;
+        if (!k) {
+                kfree (longhaul_table);
+                return -EINVAL;
+        }
+
+        return 0;
+}
+
+
+static void __init longhaul_setup_voltagescaling(void)
+{
+        union msr_longhaul longhaul;
+
+        rdmsrl (MSR_VIA_LONGHAUL, longhaul.val);
+
+        if (!(longhaul.bits.RevisionID & 1))
+                return;
+
+        minvid = longhaul.bits.MinimumVID;
+        maxvid = longhaul.bits.MaximumVID;
+        vrmrev = longhaul.bits.VRMRev;
+
+        if (minvid == 0 || maxvid == 0) {
+                printk (KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. "
+                                        "Voltage scaling disabled.\n",
+                                        minvid/1000, minvid%1000, maxvid/1000, maxvid%1000);
+                return;
+        }
+
+        if (minvid == maxvid) {
+                printk (KERN_INFO PFX "Claims to support voltage scaling but min & max are "
+                                "both %d.%03d. Voltage scaling disabled\n",
+                                maxvid/1000, maxvid%1000);
+                return;
+        }
+
+        if (vrmrev==0) {
+                dprintk ("VRM 8.5 \n");
+                memcpy (voltage_table, vrm85scales, sizeof(voltage_table));
+                numvscales = (voltage_table[maxvid]-voltage_table[minvid])/25;
+        } else {
+                dprintk ("Mobile VRM \n");
+                memcpy (voltage_table, mobilevrmscales, sizeof(voltage_table));
+                numvscales = (voltage_table[maxvid]-voltage_table[minvid])/5;
+        }
+
+        /* Current voltage isn't readable at first, so we need to
+           set it to a known value. The spec says to use maxvid */
+        longhaul.bits.RevisionKey = longhaul.bits.RevisionID;   /* FIXME: This is bad. */
+        longhaul.bits.EnableSoftVID = 1;
+        longhaul.bits.SoftVID = maxvid;
+        wrmsrl (MSR_VIA_LONGHAUL, longhaul.val);
+
+        minvid = voltage_table[minvid];
+        maxvid = voltage_table[maxvid];
+
+        dprintk ("Min VID=%d.%03d Max VID=%d.%03d, %d possible voltage scales\n",
+                maxvid/1000, maxvid%1000, minvid/1000, minvid%1000, numvscales);
+
+        can_scale_voltage = 1;
+}
+
+
+static int longhaul_verify(struct cpufreq_policy *policy)
+{
+        return cpufreq_frequency_table_verify(policy, longhaul_table);
+}
+
+
+static int longhaul_target(struct cpufreq_policy *policy,
+                            unsigned int target_freq, unsigned int relation)
+{
+        unsigned int table_index = 0;
+        unsigned int new_clock_ratio = 0;
+
+        if (cpufreq_frequency_table_target(policy, longhaul_table, target_freq, relation, &table_index))
+                return -EINVAL;
+
+        new_clock_ratio = longhaul_table[table_index].index & 0xFF;
+
+        longhaul_setstate(new_clock_ratio);
+
+        return 0;
+}
+
+
+static unsigned int longhaul_get(unsigned int cpu)
+{
+        if (cpu)
+                return 0;
+        return calc_speed(longhaul_get_cpu_mult());
+}
+
+
+static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
+{
+        struct cpuinfo_x86 *c = cpu_data;
+        char *cpuname=NULL;
+        int ret;
+
+        switch (c->x86_model) {
+        case 6:
+                cpu_model = CPU_SAMUEL;
+                cpuname = "C3 'Samuel' [C5A]";
+                longhaul_version = TYPE_LONGHAUL_V1;
+                memcpy (clock_ratio, samuel1_clock_ratio, sizeof(samuel1_clock_ratio));
+                memcpy (eblcr_table, samuel1_eblcr, sizeof(samuel1_eblcr));
+                break;
+
+        case 7:
+                longhaul_version = TYPE_LONGHAUL_V1;
+                switch (c->x86_mask) {
+                case 0:
+                        cpu_model = CPU_SAMUEL2;
+                        cpuname = "C3 'Samuel 2' [C5B]";
+                        /* Note, this is not a typo, early Samuel2's had Samuel1 ratios. */
+                        memcpy (clock_ratio, samuel1_clock_ratio, sizeof(samuel1_clock_ratio));
+                        memcpy (eblcr_table, samuel2_eblcr, sizeof(samuel2_eblcr));
+                        break;
+                case 1 ... 15:
+                        if (c->x86_mask < 8) {
+                                cpu_model = CPU_SAMUEL2;
+                                cpuname = "C3 'Samuel 2' [C5B]";
+                        } else {
+                                cpu_model = CPU_EZRA;
+                                cpuname = "C3 'Ezra' [C5C]";
+                        }
+                        memcpy (clock_ratio, ezra_clock_ratio, sizeof(ezra_clock_ratio));
+                        memcpy (eblcr_table, ezra_eblcr, sizeof(ezra_eblcr));
+                        break;
+                }
+                break;
+
+        case 8:
+                cpu_model = CPU_EZRA_T;
+                cpuname = "C3 'Ezra-T' [C5M]";
+                longhaul_version = TYPE_POWERSAVER;
+                numscales=32;
+                memcpy (clock_ratio, ezrat_clock_ratio, sizeof(ezrat_clock_ratio));
+                memcpy (eblcr_table, ezrat_eblcr, sizeof(ezrat_eblcr));
+                break;
+
+        case 9:
+                cpu_model = CPU_NEHEMIAH;
+                longhaul_version = TYPE_POWERSAVER;
+                numscales=32;
+                switch (c->x86_mask) {
+                case 0 ... 1:
+                        cpuname = "C3 'Nehemiah A' [C5N]";
+                        memcpy (clock_ratio, nehemiah_a_clock_ratio, sizeof(nehemiah_a_clock_ratio));
+                        memcpy (eblcr_table, nehemiah_a_eblcr, sizeof(nehemiah_a_eblcr));
+                        break;
+                case 2 ... 4:
+                        cpuname = "C3 'Nehemiah B' [C5N]";
+                        memcpy (clock_ratio, nehemiah_b_clock_ratio, sizeof(nehemiah_b_clock_ratio));
+                        memcpy (eblcr_table, nehemiah_b_eblcr, sizeof(nehemiah_b_eblcr));
+                        break;
+                case 5 ... 15:
+                        cpuname = "C3 'Nehemiah C' [C5N]";
+                        memcpy (clock_ratio, nehemiah_c_clock_ratio, sizeof(nehemiah_c_clock_ratio));
+                        memcpy (eblcr_table, nehemiah_c_eblcr, sizeof(nehemiah_c_eblcr));
+                        break;
+                }
+                break;
+
+        default:
+                cpuname = "Unknown";
+                break;
+        }
+
+        printk (KERN_INFO PFX "VIA %s CPU detected.  ", cpuname);
+        switch (longhaul_version) {
+        case TYPE_LONGHAUL_V1:
+        case TYPE_LONGHAUL_V2:
+                printk ("Longhaul v%d supported.\n", longhaul_version);
+                break;
+        case TYPE_POWERSAVER:
+                printk ("Powersaver supported.\n");
+                break;
+        };
+
+        ret = longhaul_get_ranges();
+        if (ret != 0)
+                return ret;
+
+        if ((longhaul_version==TYPE_LONGHAUL_V2 || longhaul_version==TYPE_POWERSAVER) &&
+                 (dont_scale_voltage==0))
+                longhaul_setup_voltagescaling();
+
+        policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+        policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+        policy->cur = calc_speed(longhaul_get_cpu_mult());
+
+        ret = cpufreq_frequency_table_cpuinfo(policy, longhaul_table);
+        if (ret)
+                return ret;
+
+        cpufreq_frequency_table_get_attr(longhaul_table, policy->cpu);
+
+        return 0;
+}
+
+static int __devexit longhaul_cpu_exit(struct cpufreq_policy *policy)
+{
+        cpufreq_frequency_table_put_attr(policy->cpu);
+        return 0;
+}
+
+static struct freq_attr* longhaul_attr[] = {
+        &cpufreq_freq_attr_scaling_available_freqs,
+        NULL,
+};
+
+static struct cpufreq_driver longhaul_driver = {
+        .verify = longhaul_verify,
+        .target = longhaul_target,
+        .get    = longhaul_get,
+        .init   = longhaul_cpu_init,
+        .exit   = __devexit_p(longhaul_cpu_exit),
+        .name   = "longhaul",
+        .owner  = THIS_MODULE,
+        .attr   = longhaul_attr,
+};
+
+
+static int __init longhaul_init(void)
+{
+        struct cpuinfo_x86 *c = cpu_data;
+
+        if (c->x86_vendor != X86_VENDOR_CENTAUR || c->x86 != 6)
+                return -ENODEV;
+
+        switch (c->x86_model) {
+        case 6 ... 9:
+                return cpufreq_register_driver(&longhaul_driver);
+        default:
+                printk (KERN_INFO PFX "Unknown VIA CPU. Contact davej@codemonkey.org.uk\n");
+        }
+
+        return -ENODEV;
+}
+
+
+static void __exit longhaul_exit(void)
+{
+        int i=0;
+
+        for (i=0; i < numscales; i++) {
+                if (clock_ratio[i] == maxmult) {
+                        longhaul_setstate(i);
+                        break;
+                }
+        }
+
+        cpufreq_unregister_driver(&longhaul_driver);
+        kfree(longhaul_table);
+}
+
+module_param (dont_scale_voltage, int, 0644);
+MODULE_PARM_DESC(dont_scale_voltage, "Don't scale voltage of processor");
+
+MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>");
+MODULE_DESCRIPTION ("Longhaul driver for VIA Cyrix processors.");
+MODULE_LICENSE ("GPL");
+
+module_init(longhaul_init);
+module_exit(longhaul_exit);
+
diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.h b/arch/i386/kernel/cpu/cpufreq/longhaul.h
new file mode 100644
index 000000000000..2a495c162ec7
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/longhaul.h
@@ -0,0 +1,466 @@
+/*
+ *  longhaul.h
+ *  (C) 2003 Dave Jones.
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  VIA-specific information
+ */
+
+union msr_bcr2 {
+        struct {
+                unsigned Reseved:19,    // 18:0
+                ESOFTBF:1,              // 19
+                Reserved2:3,            // 22:20
+                CLOCKMUL:4,             // 26:23
+                Reserved3:5;            // 31:27
+        } bits;
+        unsigned long val;
+};
+
+union msr_longhaul {
+        struct {
+                unsigned RevisionID:4,  // 3:0
+                RevisionKey:4,          // 7:4
+                EnableSoftBusRatio:1,   // 8
+                EnableSoftVID:1,        // 9
+                EnableSoftBSEL:1,       // 10
+                Reserved:3,             // 11:13
+                SoftBusRatio4:1,        // 14
+                VRMRev:1,               // 15
+                SoftBusRatio:4,         // 19:16
+                SoftVID:5,              // 24:20
+                Reserved2:3,            // 27:25
+                SoftBSEL:2,             // 29:28
+                Reserved3:2,            // 31:30
+                MaxMHzBR:4,             // 35:32
+                MaximumVID:5,           // 40:36
+                MaxMHzFSB:2,            // 42:41
+                MaxMHzBR4:1,            // 43
+                Reserved4:4,            // 47:44
+                MinMHzBR:4,             // 51:48
+                MinimumVID:5,           // 56:52
+                MinMHzFSB:2,            // 58:57
+                MinMHzBR4:1,            // 59
+                Reserved5:4;            // 63:60
+        } bits;
+        unsigned long long val;
+};
+
+/*
+ * Clock ratio tables. Div/Mod by 10 to get ratio.
+ * The eblcr ones specify the ratio read from the CPU.
+ * The clock_ratio ones specify what to write to the CPU.
+ */
+
+/*
+ * VIA C3 Samuel 1  & Samuel 2 (stepping 0)
+ */
+static int __initdata samuel1_clock_ratio[16] = {
+        -1, /* 0000 -> RESERVED */
+        30, /* 0001 ->  3.0x */
+        40, /* 0010 ->  4.0x */
+        -1, /* 0011 -> RESERVED */
+        -1, /* 0100 -> RESERVED */
+        35, /* 0101 ->  3.5x */
+        45, /* 0110 ->  4.5x */
+        55, /* 0111 ->  5.5x */
+        60, /* 1000 ->  6.0x */
+        70, /* 1001 ->  7.0x */
+        80, /* 1010 ->  8.0x */
+        50, /* 1011 ->  5.0x */
+        65, /* 1100 ->  6.5x */
+        75, /* 1101 ->  7.5x */
+        -1, /* 1110 -> RESERVED */
+        -1, /* 1111 -> RESERVED */
+};
+
+static int __initdata samuel1_eblcr[16] = {
+        50, /* 0000 -> RESERVED */
+        30, /* 0001 ->  3.0x */
+        40, /* 0010 ->  4.0x */
+        -1, /* 0011 -> RESERVED */
+        55, /* 0100 ->  5.5x */
+        35, /* 0101 ->  3.5x */
+        45, /* 0110 ->  4.5x */
+        -1, /* 0111 -> RESERVED */
+        -1, /* 1000 -> RESERVED */
+        70, /* 1001 ->  7.0x */
+        80, /* 1010 ->  8.0x */
+        60, /* 1011 ->  6.0x */
+        -1, /* 1100 -> RESERVED */
+        75, /* 1101 ->  7.5x */
+        -1, /* 1110 -> RESERVED */
+        65, /* 1111 ->  6.5x */
+};
+
+/*
+ * VIA C3 Samuel2 Stepping 1->15
+ */
+static int __initdata samuel2_eblcr[16] = {
+        50,  /* 0000 ->  5.0x */
+        30,  /* 0001 ->  3.0x */
+        40,  /* 0010 ->  4.0x */
+        100, /* 0011 -> 10.0x */
+        55,  /* 0100 ->  5.5x */
+        35,  /* 0101 ->  3.5x */
+        45,  /* 0110 ->  4.5x */
+        110, /* 0111 -> 11.0x */
+        90,  /* 1000 ->  9.0x */
+        70,  /* 1001 ->  7.0x */
+        80,  /* 1010 ->  8.0x */
+        60,  /* 1011 ->  6.0x */
+        120, /* 1100 -> 12.0x */
+        75,  /* 1101 ->  7.5x */
+        130, /* 1110 -> 13.0x */
+        65,  /* 1111 ->  6.5x */
+};
+
+/*
+ * VIA C3 Ezra
+ */
+static int __initdata ezra_clock_ratio[16] = {
+        100, /* 0000 -> 10.0x */
+        30,  /* 0001 ->  3.0x */
+        40,  /* 0010 ->  4.0x */
+        90,  /* 0011 ->  9.0x */
+        95,  /* 0100 ->  9.5x */
+        35,  /* 0101 ->  3.5x */
+        45,  /* 0110 ->  4.5x */
+        55,  /* 0111 ->  5.5x */
+        60,  /* 1000 ->  6.0x */
+        70,  /* 1001 ->  7.0x */
+        80,  /* 1010 ->  8.0x */
+        50,  /* 1011 ->  5.0x */
+        65,  /* 1100 ->  6.5x */
+        75,  /* 1101 ->  7.5x */
+        85,  /* 1110 ->  8.5x */
+        120, /* 1111 -> 12.0x */
+};
+
+static int __initdata ezra_eblcr[16] = {
+        50,  /* 0000 ->  5.0x */
+        30,  /* 0001 ->  3.0x */
+        40,  /* 0010 ->  4.0x */
+        100, /* 0011 -> 10.0x */
+        55,  /* 0100 ->  5.5x */
+        35,  /* 0101 ->  3.5x */
+        45,  /* 0110 ->  4.5x */
+        95,  /* 0111 ->  9.5x */
+        90,  /* 1000 ->  9.0x */
+        70,  /* 1001 ->  7.0x */
+        80,  /* 1010 ->  8.0x */
+        60,  /* 1011 ->  6.0x */
+        120, /* 1100 -> 12.0x */
+        75,  /* 1101 ->  7.5x */
+        85,  /* 1110 ->  8.5x */
+        65,  /* 1111 ->  6.5x */
+};
+
+/*
+ * VIA C3 (Ezra-T) [C5M].
+ */
+static int __initdata ezrat_clock_ratio[32] = {
+        100, /* 0000 -> 10.0x */
+        30,  /* 0001 ->  3.0x */
+        40,  /* 0010 ->  4.0x */
+        90,  /* 0011 ->  9.0x */
+        95,  /* 0100 ->  9.5x */
+        35,  /* 0101 ->  3.5x */
+        45,  /* 0110 ->  4.5x */
+        55,  /* 0111 ->  5.5x */
+        60,  /* 1000 ->  6.0x */
+        70,  /* 1001 ->  7.0x */
+        80,  /* 1010 ->  8.0x */
+        50,  /* 1011 ->  5.0x */
+        65,  /* 1100 ->  6.5x */
+        75,  /* 1101 ->  7.5x */
+        85,  /* 1110 ->  8.5x */
+        120, /* 1111 ->  12.0x */
+
+        -1,  /* 0000 -> RESERVED (10.0x) */
+        110, /* 0001 -> 11.0x */
+        120, /* 0010 -> 12.0x */
+        -1,  /* 0011 -> RESERVED (9.0x)*/
+        105, /* 0100 -> 10.5x */
+        115, /* 0101 -> 11.5x */
+        125, /* 0110 -> 12.5x */
+        135, /* 0111 -> 13.5x */
+        140, /* 1000 -> 14.0x */
+        150, /* 1001 -> 15.0x */
+        160, /* 1010 -> 16.0x */
+        130, /* 1011 -> 13.0x */
+        145, /* 1100 -> 14.5x */
+        155, /* 1101 -> 15.5x */
+        -1,  /* 1110 -> RESERVED (13.0x) */
+        -1,  /* 1111 -> RESERVED (12.0x) */
+};
+
+static int __initdata ezrat_eblcr[32] = {
+        50,  /* 0000 ->  5.0x */
+        30,  /* 0001 ->  3.0x */
+        40,  /* 0010 ->  4.0x */
+        100, /* 0011 -> 10.0x */
+        55,  /* 0100 ->  5.5x */
+        35,  /* 0101 ->  3.5x */
+        45,  /* 0110 ->  4.5x */
+        95,  /* 0111 ->  9.5x */
+        90,  /* 1000 ->  9.0x */
+        70,  /* 1001 ->  7.0x */
+        80,  /* 1010 ->  8.0x */
+        60,  /* 1011 ->  6.0x */
+        120, /* 1100 -> 12.0x */
+        75,  /* 1101 ->  7.5x */
+        85,  /* 1110 ->  8.5x */
+        65,  /* 1111 ->  6.5x */
+
+        -1,  /* 0000 -> RESERVED (9.0x) */
+        110, /* 0001 -> 11.0x */
+        120, /* 0010 -> 12.0x */
+        -1,  /* 0011 -> RESERVED (10.0x)*/
+        135, /* 0100 -> 13.5x */
+        115, /* 0101 -> 11.5x */
+        125, /* 0110 -> 12.5x */
+        105, /* 0111 -> 10.5x */
+        130, /* 1000 -> 13.0x */
+        150, /* 1001 -> 15.0x */
+        160, /* 1010 -> 16.0x */
+        140, /* 1011 -> 14.0x */
+        -1,  /* 1100 -> RESERVED (12.0x) */
+        155, /* 1101 -> 15.5x */
+        -1,  /* 1110 -> RESERVED (13.0x) */
+        145, /* 1111 -> 14.5x */
+};
+
+/*
+ * VIA C3 Nehemiah */
+ 
+static int __initdata nehemiah_a_clock_ratio[32] = {
+        100, /* 0000 -> 10.0x */
+        160, /* 0001 -> 16.0x */
+        -1,  /* 0010 ->  RESERVED */
+        90,  /* 0011 ->  9.0x */
+        95,  /* 0100 ->  9.5x */
+        -1,  /* 0101 ->  RESERVED */
+        -1,  /* 0110 ->  RESERVED */
+        55,  /* 0111 ->  5.5x */
+        60,  /* 1000 ->  6.0x */
+        70,  /* 1001 ->  7.0x */
+        80,  /* 1010 ->  8.0x */
+        50,  /* 1011 ->  5.0x */
+        65,  /* 1100 ->  6.5x */
+        75,  /* 1101 ->  7.5x */
+        85,  /* 1110 ->  8.5x */
+        120, /* 1111 -> 12.0x */
+        100, /* 0000 -> 10.0x */
+        -1,  /* 0001 -> RESERVED */
+        120, /* 0010 -> 12.0x */
+        90,  /* 0011 ->  9.0x */
+        105, /* 0100 -> 10.5x */
+        115, /* 0101 -> 11.5x */
+        125, /* 0110 -> 12.5x */
+        135, /* 0111 -> 13.5x */
+        140, /* 1000 -> 14.0x */
+        150, /* 1001 -> 15.0x */
+        160, /* 1010 -> 16.0x */
+        130, /* 1011 -> 13.0x */
+        145, /* 1100 -> 14.5x */
+        155, /* 1101 -> 15.5x */
+        -1,  /* 1110 -> RESERVED (13.0x) */
+        120, /* 1111 -> 12.0x */
+};
+
+static int __initdata  nehemiah_b_clock_ratio[32] = {
+        100, /* 0000 -> 10.0x */
+        160, /* 0001 -> 16.0x */
+        -1,  /* 0010 ->  RESERVED */
+        90,  /* 0011 ->  9.0x */
+        95,  /* 0100 ->  9.5x */
+        -1,  /* 0101 ->  RESERVED */
+        -1,  /* 0110 ->  RESERVED */
+        55,  /* 0111 ->  5.5x */
+        60,  /* 1000 ->  6.0x */
+        70,  /* 1001 ->  7.0x */
+        80,  /* 1010 ->  8.0x */
+        50,  /* 1011 ->  5.0x */
+        65,  /* 1100 ->  6.5x */
+        75,  /* 1101 ->  7.5x */
+        85,  /* 1110 ->  8.5x */
+        120, /* 1111 -> 12.0x */
+        100, /* 0000 -> 10.0x */
+        110, /* 0001 -> 11.0x */
+        120, /* 0010 -> 12.0x */
+        90,  /* 0011 ->  9.0x */
+        105, /* 0100 -> 10.5x */
+        115, /* 0101 -> 11.5x */
+        125, /* 0110 -> 12.5x */
+        135, /* 0111 -> 13.5x */
+        140, /* 1000 -> 14.0x */
+        150, /* 1001 -> 15.0x */
+        160, /* 1010 -> 16.0x */
+        130, /* 1011 -> 13.0x */
+        145, /* 1100 -> 14.5x */
+        155, /* 1101 -> 15.5x */
+        -1,  /* 1110 -> RESERVED (13.0x) */
+        120, /* 1111 -> 12.0x */
+};
+
+static int __initdata  nehemiah_c_clock_ratio[32] = {
+        100, /* 0000 -> 10.0x */
+        160, /* 0001 -> 16.0x */
+        40,  /* 0010 ->  RESERVED */
+        90,  /* 0011 ->  9.0x */
+        95,  /* 0100 ->  9.5x */
+        -1,  /* 0101 ->  RESERVED */
+        45,  /* 0110 ->  RESERVED */
+        55,  /* 0111 ->  5.5x */
+        60,  /* 1000 ->  6.0x */
+        70,  /* 1001 ->  7.0x */
+        80,  /* 1010 ->  8.0x */
+        50,  /* 1011 ->  5.0x */
+        65,  /* 1100 ->  6.5x */
+        75,  /* 1101 ->  7.5x */
+        85,  /* 1110 ->  8.5x */
+        120, /* 1111 -> 12.0x */
+        100, /* 0000 -> 10.0x */
+        110, /* 0001 -> 11.0x */
+        120, /* 0010 -> 12.0x */
+        90,  /* 0011 ->  9.0x */
+        105, /* 0100 -> 10.5x */
+        115, /* 0101 -> 11.5x */
+        125, /* 0110 -> 12.5x */
+        135, /* 0111 -> 13.5x */
+        140, /* 1000 -> 14.0x */
+        150, /* 1001 -> 15.0x */
+        160, /* 1010 -> 16.0x */
+        130, /* 1011 -> 13.0x */
+        145, /* 1100 -> 14.5x */
+        155, /* 1101 -> 15.5x */
+        -1,  /* 1110 -> RESERVED (13.0x) */
+        120, /* 1111 -> 12.0x */
+};
+
+static int __initdata nehemiah_a_eblcr[32] = {
+        50,  /* 0000 ->  5.0x */
+        160, /* 0001 -> 16.0x */
+        -1,  /* 0010 ->  RESERVED */
+        100, /* 0011 -> 10.0x */
+        55,  /* 0100 ->  5.5x */
+        -1,  /* 0101 ->  RESERVED */
+        -1,  /* 0110 ->  RESERVED */
+        95,  /* 0111 ->  9.5x */
+        90,  /* 1000 ->  9.0x */
+        70,  /* 1001 ->  7.0x */
+        80,  /* 1010 ->  8.0x */
+        60,  /* 1011 ->  6.0x */
+        120, /* 1100 -> 12.0x */
+        75,  /* 1101 ->  7.5x */
+        85,  /* 1110 ->  8.5x */
+        65,  /* 1111 ->  6.5x */
+        90,  /* 0000 ->  9.0x */
+        -1,  /* 0001 -> RESERVED */
+        120, /* 0010 -> 12.0x */
+        100, /* 0011 -> 10.0x */
+        135, /* 0100 -> 13.5x */
+        115, /* 0101 -> 11.5x */
+        125, /* 0110 -> 12.5x */
+        105, /* 0111 -> 10.5x */
+        130, /* 1000 -> 13.0x */
+        150, /* 1001 -> 15.0x */
+        160, /* 1010 -> 16.0x */
+        140, /* 1011 -> 14.0x */
+        120, /* 1100 -> 12.0x */
+        155, /* 1101 -> 15.5x */
+        -1,  /* 1110 -> RESERVED (13.0x) */
+        145 /* 1111 -> 14.5x */
+   /* end of table  */
+};
+static int __initdata nehemiah_b_eblcr[32] = {
+        50,  /* 0000 ->  5.0x */
+        160, /* 0001 -> 16.0x */
+        -1,  /* 0010 ->  RESERVED */
+        100, /* 0011 -> 10.0x */
+        55,  /* 0100 ->  5.5x */
+        -1,  /* 0101 ->  RESERVED */
+        -1,  /* 0110 ->  RESERVED */
+        95,  /* 0111 ->  9.5x */
+        90,  /* 1000 ->  9.0x */
+        70,  /* 1001 ->  7.0x */
+        80,  /* 1010 ->  8.0x */
+        60,  /* 1011 ->  6.0x */
+        120, /* 1100 -> 12.0x */
+        75,  /* 1101 ->  7.5x */
+        85,  /* 1110 ->  8.5x */
+        65,  /* 1111 ->  6.5x */
+        90,  /* 0000 ->  9.0x */
+        110, /* 0001 -> 11.0x */
+        120, /* 0010 -> 12.0x */
+        100, /* 0011 -> 10.0x */
+        135, /* 0100 -> 13.5x */
+        115, /* 0101 -> 11.5x */
+        125, /* 0110 -> 12.5x */
+        105, /* 0111 -> 10.5x */
+        130, /* 1000 -> 13.0x */
+        150, /* 1001 -> 15.0x */
+        160, /* 1010 -> 16.0x */
+        140, /* 1011 -> 14.0x */
+        120, /* 1100 -> 12.0x */
+        155, /* 1101 -> 15.5x */
+        -1,  /* 1110 -> RESERVED (13.0x) */
+        145 /* 1111 -> 14.5x */
+           /* end of table  */
+};
+static int __initdata nehemiah_c_eblcr[32] = {
+        50,  /* 0000 ->  5.0x */
+        160, /* 0001 -> 16.0x */
+        40,  /* 0010 ->  RESERVED */
+        100, /* 0011 -> 10.0x */
+        55,  /* 0100 ->  5.5x */
+        -1,  /* 0101 ->  RESERVED */
+        45,  /* 0110 ->  RESERVED */
+        95,  /* 0111 ->  9.5x */
+        90,  /* 1000 ->  9.0x */
+        70,  /* 1001 ->  7.0x */
+        80,  /* 1010 ->  8.0x */
+        60,  /* 1011 ->  6.0x */
+        120, /* 1100 -> 12.0x */
+        75,  /* 1101 ->  7.5x */
+        85,  /* 1110 ->  8.5x */
+        65,  /* 1111 ->  6.5x */
+        90,  /* 0000 ->  9.0x */
+        110, /* 0001 -> 11.0x */
+        120, /* 0010 -> 12.0x */
+        100, /* 0011 -> 10.0x */
+        135, /* 0100 -> 13.5x */
+        115, /* 0101 -> 11.5x */
+        125, /* 0110 -> 12.5x */
+        105, /* 0111 -> 10.5x */
+        130, /* 1000 -> 13.0x */
+        150, /* 1001 -> 15.0x */
+        160, /* 1010 -> 16.0x */
+        140, /* 1011 -> 14.0x */
+        120, /* 1100 -> 12.0x */
+        155, /* 1101 -> 15.5x */
+        -1,  /* 1110 -> RESERVED (13.0x) */
+        145 /* 1111 -> 14.5x */
+          /* end of table  */
+};
+
+/* 
+ * Voltage scales. Div/Mod by 1000 to get actual voltage.
+ * Which scale to use depends on the VRM type in use.
+ */
+static int __initdata vrm85scales[32] = {
+        1250, 1200, 1150, 1100, 1050, 1800, 1750, 1700,
+        1650, 1600, 1550, 1500, 1450, 1400, 1350, 1300,
+        1275, 1225, 1175, 1125, 1075, 1825, 1775, 1725,
+        1675, 1625, 1575, 1525, 1475, 1425, 1375, 1325,
+};
+
+static int __initdata mobilevrmscales[32] = {
+        2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650,
+        1600, 1550, 1500, 1450, 1500, 1350, 1300, -1,
+        1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100,
+        1075, 1050, 1025, 1000, 975, 950, 925, -1,
+};
+
diff --git a/arch/i386/kernel/cpu/cpufreq/longrun.c b/arch/i386/kernel/cpu/cpufreq/longrun.c
new file mode 100644
index 000000000000..e3868de4dc2e
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/longrun.c
@@ -0,0 +1,326 @@
+/*
+ * (C) 2002 - 2003  Dominik Brodowski <linux@brodo.de>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/cpufreq.h>
+
+#include <asm/msr.h>
+#include <asm/processor.h>
+#include <asm/timex.h>
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longrun", msg)
+
+static struct cpufreq_driver    longrun_driver;
+
+/**
+ * longrun_{low,high}_freq is needed for the conversion of cpufreq kHz
+ * values into per cent values. In TMTA microcode, the following is valid:
+ * performance_pctg = (current_freq - low_freq)/(high_freq - low_freq)
+ */
+static unsigned int longrun_low_freq, longrun_high_freq;
+
+
+/**
+ * longrun_get_policy - get the current LongRun policy
+ * @policy: struct cpufreq_policy where current policy is written into
+ *
+ * Reads the current LongRun policy by access to MSR_TMTA_LONGRUN_FLAGS
+ * and MSR_TMTA_LONGRUN_CTRL
+ */
+static void __init longrun_get_policy(struct cpufreq_policy *policy)
+{
+        u32 msr_lo, msr_hi;
+
+        rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi);
+        dprintk("longrun flags are %x - %x\n", msr_lo, msr_hi);
+        if (msr_lo & 0x01)
+                policy->policy = CPUFREQ_POLICY_PERFORMANCE;
+        else
+                policy->policy = CPUFREQ_POLICY_POWERSAVE;
+
+        rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
+        dprintk("longrun ctrl is %x - %x\n", msr_lo, msr_hi);
+        msr_lo &= 0x0000007F;
+        msr_hi &= 0x0000007F;
+
+        if ( longrun_high_freq <= longrun_low_freq ) {
+                /* Assume degenerate Longrun table */
+                policy->min = policy->max = longrun_high_freq;
+        } else {
+                policy->min = longrun_low_freq + msr_lo *
+                        ((longrun_high_freq - longrun_low_freq) / 100);
+                policy->max = longrun_low_freq + msr_hi *
+                        ((longrun_high_freq - longrun_low_freq) / 100);
+        }
+        policy->cpu = 0;
+}
+
+
+/**
+ * longrun_set_policy - sets a new CPUFreq policy
+ * @policy: new policy
+ *
+ * Sets a new CPUFreq policy on LongRun-capable processors. This function
+ * has to be called with cpufreq_driver locked.
+ */
+static int longrun_set_policy(struct cpufreq_policy *policy)
+{
+        u32 msr_lo, msr_hi;
+        u32 pctg_lo, pctg_hi;
+
+        if (!policy)
+                return -EINVAL;
+
+        if ( longrun_high_freq <= longrun_low_freq ) {
+                /* Assume degenerate Longrun table */
+                pctg_lo = pctg_hi = 100;
+        } else {
+                pctg_lo = (policy->min - longrun_low_freq) /
+                        ((longrun_high_freq - longrun_low_freq) / 100);
+                pctg_hi = (policy->max - longrun_low_freq) /
+                        ((longrun_high_freq - longrun_low_freq) / 100);
+        }
+
+        if (pctg_hi > 100)
+                pctg_hi = 100;
+        if (pctg_lo > pctg_hi)
+                pctg_lo = pctg_hi;
+
+        /* performance or economy mode */
+        rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi);
+        msr_lo &= 0xFFFFFFFE;
+        switch (policy->policy) {
+        case CPUFREQ_POLICY_PERFORMANCE:
+                msr_lo |= 0x00000001;
+                break;
+        case CPUFREQ_POLICY_POWERSAVE:
+                break;
+        }
+        wrmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi);
+
+        /* lower and upper boundary */
+        rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
+        msr_lo &= 0xFFFFFF80;
+        msr_hi &= 0xFFFFFF80;
+        msr_lo |= pctg_lo;
+        msr_hi |= pctg_hi;
+        wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
+
+        return 0;
+}
+
+
+/**
+ * longrun_verify_poliy - verifies a new CPUFreq policy
+ * @policy: the policy to verify
+ *
+ * Validates a new CPUFreq policy. This function has to be called with
+ * cpufreq_driver locked.
+ */
+static int longrun_verify_policy(struct cpufreq_policy *policy)
+{
+        if (!policy)
+                return -EINVAL;
+
+        policy->cpu = 0;
+        cpufreq_verify_within_limits(policy,
+                policy->cpuinfo.min_freq,
+                policy->cpuinfo.max_freq);
+
+        if ((policy->policy != CPUFREQ_POLICY_POWERSAVE) &&
+            (policy->policy != CPUFREQ_POLICY_PERFORMANCE))
+                return -EINVAL;
+
+        return 0;
+}
+
+static unsigned int longrun_get(unsigned int cpu)
+{
+        u32 eax, ebx, ecx, edx;
+
+        if (cpu)
+                return 0;
+
+        cpuid(0x80860007, &eax, &ebx, &ecx, &edx);
+        dprintk("cpuid eax is %u\n", eax);
+
+        return (eax * 1000);
+}
+
+/**
+ * longrun_determine_freqs - determines the lowest and highest possible core frequency
+ * @low_freq: an int to put the lowest frequency into
+ * @high_freq: an int to put the highest frequency into
+ *
+ * Determines the lowest and highest possible core frequencies on this CPU.
+ * This is necessary to calculate the performance percentage according to
+ * TMTA rules:
+ * performance_pctg = (target_freq - low_freq)/(high_freq - low_freq)
+ */
+static unsigned int __init longrun_determine_freqs(unsigned int *low_freq,
+                                                   unsigned int *high_freq)
+{
+        u32 msr_lo, msr_hi;
+        u32 save_lo, save_hi;
+        u32 eax, ebx, ecx, edx;
+        u32 try_hi;
+        struct cpuinfo_x86 *c = cpu_data;
+
+        if (!low_freq || !high_freq)
+                return -EINVAL;
+
+        if (cpu_has(c, X86_FEATURE_LRTI)) {
+                /* if the LongRun Table Interface is present, the
+                 * detection is a bit easier:
+                 * For minimum frequency, read out the maximum
+                 * level (msr_hi), write that into "currently
+                 * selected level", and read out the frequency.
+                 * For maximum frequency, read out level zero.
+                 */
+                /* minimum */
+                rdmsr(MSR_TMTA_LRTI_READOUT, msr_lo, msr_hi);
+                wrmsr(MSR_TMTA_LRTI_READOUT, msr_hi, msr_hi);
+                rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi);
+                *low_freq = msr_lo * 1000; /* to kHz */
+
+                /* maximum */
+                wrmsr(MSR_TMTA_LRTI_READOUT, 0, msr_hi);
+                rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi);
+                *high_freq = msr_lo * 1000; /* to kHz */
+
+                dprintk("longrun table interface told %u - %u kHz\n", *low_freq, *high_freq);
+
+                if (*low_freq > *high_freq)
+                        *low_freq = *high_freq;
+                return 0;
+        }
+
+        /* set the upper border to the value determined during TSC init */
+        *high_freq = (cpu_khz / 1000);
+        *high_freq = *high_freq * 1000;
+        dprintk("high frequency is %u kHz\n", *high_freq);
+
+        /* get current borders */
+        rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
+        save_lo = msr_lo & 0x0000007F;
+        save_hi = msr_hi & 0x0000007F;
+
+        /* if current perf_pctg is larger than 90%, we need to decrease the
+         * upper limit to make the calculation more accurate.
+         */
+        cpuid(0x80860007, &eax, &ebx, &ecx, &edx);
+        /* try decreasing in 10% steps, some processors react only
+         * on some barrier values */
+        for (try_hi = 80; try_hi > 0 && ecx > 90; try_hi -=10) {
+                /* set to 0 to try_hi perf_pctg */
+                msr_lo &= 0xFFFFFF80;
+                msr_hi &= 0xFFFFFF80;
+                msr_lo |= 0;
+                msr_hi |= try_hi;
+                wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
+
+                /* read out current core MHz and current perf_pctg */
+                cpuid(0x80860007, &eax, &ebx, &ecx, &edx);
+
+                /* restore values */
+                wrmsr(MSR_TMTA_LONGRUN_CTRL, save_lo, save_hi);
+        }
+        dprintk("percentage is %u %%, freq is %u MHz\n", ecx, eax);
+
+        /* performance_pctg = (current_freq - low_freq)/(high_freq - low_freq)
+         * eqals
+         * low_freq * ( 1 - perf_pctg) = (cur_freq - high_freq * perf_pctg)
+         *
+         * high_freq * perf_pctg is stored tempoarily into "ebx".
+         */
+        ebx = (((cpu_khz / 1000) * ecx) / 100); /* to MHz */
+
+        if ((ecx > 95) || (ecx == 0) || (eax < ebx))
+                return -EIO;
+
+        edx = (eax - ebx) / (100 - ecx);
+        *low_freq = edx * 1000; /* back to kHz */
+
+        dprintk("low frequency is %u kHz\n", *low_freq);
+
+        if (*low_freq > *high_freq)
+                *low_freq = *high_freq;
+
+        return 0;
+}
+
+
+static int __init longrun_cpu_init(struct cpufreq_policy *policy)
+{
+        int result = 0;
+
+        /* capability check */
+        if (policy->cpu != 0)
+                return -ENODEV;
+
+        /* detect low and high frequency */
+        result = longrun_determine_freqs(&longrun_low_freq, &longrun_high_freq);
+        if (result)
+                return result;
+
+        /* cpuinfo and default policy values */
+        policy->cpuinfo.min_freq = longrun_low_freq;
+        policy->cpuinfo.max_freq = longrun_high_freq;
+        policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+        longrun_get_policy(policy);
+
+        return 0;
+}
+
+
+static struct cpufreq_driver longrun_driver = {
+        .flags          = CPUFREQ_CONST_LOOPS,
+        .verify         = longrun_verify_policy,
+        .setpolicy      = longrun_set_policy,
+        .get            = longrun_get,
+        .init           = longrun_cpu_init,
+        .name           = "longrun",
+        .owner          = THIS_MODULE,
+};
+
+
+/**
+ * longrun_init - initializes the Transmeta Crusoe LongRun CPUFreq driver
+ *
+ * Initializes the LongRun support.
+ */
+static int __init longrun_init(void)
+{
+        struct cpuinfo_x86 *c = cpu_data;
+
+        if (c->x86_vendor != X86_VENDOR_TRANSMETA ||
+            !cpu_has(c, X86_FEATURE_LONGRUN))
+                return -ENODEV;
+
+        return cpufreq_register_driver(&longrun_driver);
+}
+
+
+/**
+ * longrun_exit - unregisters LongRun support
+ */
+static void __exit longrun_exit(void)
+{
+        cpufreq_unregister_driver(&longrun_driver);
+}
+
+
+MODULE_AUTHOR ("Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION ("LongRun driver for Transmeta Crusoe and Efficeon processors.");
+MODULE_LICENSE ("GPL");
+
+module_init(longrun_init);
+module_exit(longrun_exit);
diff --git a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
new file mode 100644
index 000000000000..aa622d52c6e5
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
@@ -0,0 +1,337 @@
+/*
+ *      Pentium 4/Xeon CPU on demand clock modulation/speed scaling
+ *      (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
+ *      (C) 2002 Zwane Mwaikambo <zwane@commfireservices.com>
+ *      (C) 2002 Arjan van de Ven <arjanv@redhat.com>
+ *      (C) 2002 Tora T. Engstad
+ *      All Rights Reserved
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ *      The author(s) of this software shall not be held liable for damages
+ *      of any nature resulting due to the use of this software. This
+ *      software is provided AS-IS with no warranties.
+ *      
+ *      Date            Errata                  Description
+ *      20020525        N44, O17        12.5% or 25% DC causes lockup
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h> 
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/cpufreq.h>
+#include <linux/slab.h>
+#include <linux/cpumask.h>
+
+#include <asm/processor.h> 
+#include <asm/msr.h>
+#include <asm/timex.h>
+
+#include "speedstep-lib.h"
+
+#define PFX     "p4-clockmod: "
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "p4-clockmod", msg)
+
+/*
+ * Duty Cycle (3bits), note DC_DISABLE is not specified in
+ * intel docs i just use it to mean disable
+ */
+enum {
+        DC_RESV, DC_DFLT, DC_25PT, DC_38PT, DC_50PT,
+        DC_64PT, DC_75PT, DC_88PT, DC_DISABLE
+};
+
+#define DC_ENTRIES      8
+
+
+static int has_N44_O17_errata[NR_CPUS];
+static unsigned int stock_freq;
+static struct cpufreq_driver p4clockmod_driver;
+static unsigned int cpufreq_p4_get(unsigned int cpu);
+
+static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
+{
+        u32 l, h;
+
+        if (!cpu_online(cpu) || (newstate > DC_DISABLE) || (newstate == DC_RESV))
+                return -EINVAL;
+
+        rdmsr(MSR_IA32_THERM_STATUS, l, h);
+
+        if (l & 0x01)
+                dprintk("CPU#%d currently thermal throttled\n", cpu);
+
+        if (has_N44_O17_errata[cpu] && (newstate == DC_25PT || newstate == DC_DFLT))
+                newstate = DC_38PT;
+
+        rdmsr(MSR_IA32_THERM_CONTROL, l, h);
+        if (newstate == DC_DISABLE) {
+                dprintk("CPU#%d disabling modulation\n", cpu);
+                wrmsr(MSR_IA32_THERM_CONTROL, l & ~(1<<4), h);
+        } else {
+                dprintk("CPU#%d setting duty cycle to %d%%\n",
+                        cpu, ((125 * newstate) / 10));
+                /* bits 63 - 5  : reserved 
+                 * bit  4       : enable/disable
+                 * bits 3-1     : duty cycle
+                 * bit  0       : reserved
+                 */
+                l = (l & ~14);
+                l = l | (1<<4) | ((newstate & 0x7)<<1);
+                wrmsr(MSR_IA32_THERM_CONTROL, l, h);
+        }
+
+        return 0;
+}
+
+
+static struct cpufreq_frequency_table p4clockmod_table[] = {
+        {DC_RESV, CPUFREQ_ENTRY_INVALID},
+        {DC_DFLT, 0},
+        {DC_25PT, 0},
+        {DC_38PT, 0},
+        {DC_50PT, 0},
+        {DC_64PT, 0},
+        {DC_75PT, 0},
+        {DC_88PT, 0},
+        {DC_DISABLE, 0},
+        {DC_RESV, CPUFREQ_TABLE_END},
+};
+
+
+static int cpufreq_p4_target(struct cpufreq_policy *policy,
+                             unsigned int target_freq,
+                             unsigned int relation)
+{
+        unsigned int    newstate = DC_RESV;
+        struct cpufreq_freqs freqs;
+        cpumask_t cpus_allowed;
+        int i;
+
+        if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0], target_freq, relation, &newstate))
+                return -EINVAL;
+
+        freqs.old = cpufreq_p4_get(policy->cpu);
+        freqs.new = stock_freq * p4clockmod_table[newstate].index / 8;
+
+        if (freqs.new == freqs.old)
+                return 0;
+
+        /* notifiers */
+        for_each_cpu_mask(i, policy->cpus) {
+                freqs.cpu = i;
+                cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+        }
+
+        /* run on each logical CPU, see section 13.15.3 of IA32 Intel Architecture Software
+         * Developer's Manual, Volume 3 
+         */
+        cpus_allowed = current->cpus_allowed;
+
+        for_each_cpu_mask(i, policy->cpus) {
+                cpumask_t this_cpu = cpumask_of_cpu(i);
+
+                set_cpus_allowed(current, this_cpu);
+                BUG_ON(smp_processor_id() != i);
+
+                cpufreq_p4_setdc(i, p4clockmod_table[newstate].index);
+        }
+        set_cpus_allowed(current, cpus_allowed);
+
+        /* notifiers */
+        for_each_cpu_mask(i, policy->cpus) {
+                freqs.cpu = i;
+                cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+        }
+
+        return 0;
+}
+
+
+static int cpufreq_p4_verify(struct cpufreq_policy *policy)
+{
+        return cpufreq_frequency_table_verify(policy, &p4clockmod_table[0]);
+}
+
+
+static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
+{
+        if ((c->x86 == 0x06) && (c->x86_model == 0x09)) {
+                /* Pentium M (Banias) */
+                printk(KERN_WARNING PFX "Warning: Pentium M detected. "
+                       "The speedstep_centrino module offers voltage scaling"
+                       " in addition of frequency scaling. You should use "
+                       "that instead of p4-clockmod, if possible.\n");
+                return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM);
+        }
+
+        if ((c->x86 == 0x06) && (c->x86_model == 0x0D)) {
+                /* Pentium M (Dothan) */
+                printk(KERN_WARNING PFX "Warning: Pentium M detected. "
+                       "The speedstep_centrino module offers voltage scaling"
+                       " in addition of frequency scaling. You should use "
+                       "that instead of p4-clockmod, if possible.\n");
+                /* on P-4s, the TSC runs with constant frequency independent whether
+                 * throttling is active or not. */
+                p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
+                return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM);
+        }
+
+        if (c->x86 != 0xF) {
+                printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. Please send an e-mail to <linux@brodo.de>\n");
+                return 0;
+        }
+
+        /* on P-4s, the TSC runs with constant frequency independent whether
+         * throttling is active or not. */
+        p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
+
+        if (speedstep_detect_processor() == SPEEDSTEP_PROCESSOR_P4M) {
+                printk(KERN_WARNING PFX "Warning: Pentium 4-M detected. "
+                       "The speedstep-ich or acpi cpufreq modules offer "
+                       "voltage scaling in addition of frequency scaling. "
+                       "You should use either one instead of p4-clockmod, "
+                       "if possible.\n");
+                return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4M);
+        }
+
+        return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4D);
+}
+
+ 
+
+static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
+{
+        struct cpuinfo_x86 *c = &cpu_data[policy->cpu];
+        int cpuid = 0;
+        unsigned int i;
+
+#ifdef CONFIG_SMP
+        policy->cpus = cpu_sibling_map[policy->cpu];
+#endif
+
+        /* Errata workaround */
+        cpuid = (c->x86 << 8) | (c->x86_model << 4) | c->x86_mask;
+        switch (cpuid) {
+        case 0x0f07:
+        case 0x0f0a:
+        case 0x0f11:
+        case 0x0f12:
+                has_N44_O17_errata[policy->cpu] = 1;
+                dprintk("has errata -- disabling low frequencies\n");
+        }
+        
+        /* get max frequency */
+        stock_freq = cpufreq_p4_get_frequency(c);
+        if (!stock_freq)
+                return -EINVAL;
+
+        /* table init */
+        for (i=1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) {
+                if ((i<2) && (has_N44_O17_errata[policy->cpu]))
+                        p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+                else
+                        p4clockmod_table[i].frequency = (stock_freq * i)/8;
+        }
+        cpufreq_frequency_table_get_attr(p4clockmod_table, policy->cpu);
+        
+        /* cpuinfo and default policy values */
+        policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+        policy->cpuinfo.transition_latency = 1000000; /* assumed */
+        policy->cur = stock_freq;
+
+        return cpufreq_frequency_table_cpuinfo(policy, &p4clockmod_table[0]);
+}
+
+
+static int cpufreq_p4_cpu_exit(struct cpufreq_policy *policy)
+{
+        cpufreq_frequency_table_put_attr(policy->cpu);    
+        return 0;
+}
+
+static unsigned int cpufreq_p4_get(unsigned int cpu)
+{
+        cpumask_t cpus_allowed;
+        u32 l, h;
+
+        cpus_allowed = current->cpus_allowed;
+
+        set_cpus_allowed(current, cpumask_of_cpu(cpu));
+        BUG_ON(smp_processor_id() != cpu);
+
+        rdmsr(MSR_IA32_THERM_CONTROL, l, h);
+
+        set_cpus_allowed(current, cpus_allowed);
+
+        if (l & 0x10) {
+                l = l >> 1;
+                l &= 0x7;
+        } else
+                l = DC_DISABLE;
+
+        if (l != DC_DISABLE)
+                return (stock_freq * l / 8);
+
+        return stock_freq;
+}
+
+static struct freq_attr* p4clockmod_attr[] = {
+        &cpufreq_freq_attr_scaling_available_freqs,
+        NULL,
+};
+
+static struct cpufreq_driver p4clockmod_driver = {
+        .verify         = cpufreq_p4_verify,
+        .target         = cpufreq_p4_target,
+        .init           = cpufreq_p4_cpu_init,
+        .exit           = cpufreq_p4_cpu_exit,
+        .get            = cpufreq_p4_get,
+        .name           = "p4-clockmod",
+        .owner          = THIS_MODULE,
+        .attr           = p4clockmod_attr,
+};
+
+
+static int __init cpufreq_p4_init(void)
+{       
+        struct cpuinfo_x86 *c = cpu_data;
+        int ret;
+
+        /*
+         * THERM_CONTROL is architectural for IA32 now, so 
+         * we can rely on the capability checks
+         */
+        if (c->x86_vendor != X86_VENDOR_INTEL)
+                return -ENODEV;
+
+        if (!test_bit(X86_FEATURE_ACPI, c->x86_capability) ||
+                !test_bit(X86_FEATURE_ACC, c->x86_capability))
+                return -ENODEV;
+
+        ret = cpufreq_register_driver(&p4clockmod_driver);
+        if (!ret)
+                printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock Modulation available\n");
+
+        return (ret);
+}
+
+
+static void __exit cpufreq_p4_exit(void)
+{
+        cpufreq_unregister_driver(&p4clockmod_driver);
+}
+
+
+MODULE_AUTHOR ("Zwane Mwaikambo <zwane@commfireservices.com>");
+MODULE_DESCRIPTION ("cpufreq driver for Pentium(TM) 4/Xeon(TM)");
+MODULE_LICENSE ("GPL");
+
+late_initcall(cpufreq_p4_init);
+module_exit(cpufreq_p4_exit);
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k6.c b/arch/i386/kernel/cpu/cpufreq/powernow-k6.c
new file mode 100644
index 000000000000..222f8cfe3c57
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k6.c
@@ -0,0 +1,256 @@
+/*
+ *  This file was based upon code in Powertweak Linux (http://powertweak.sf.net)
+ *  (C) 2000-2003  Dave Jones, Arjan van de Ven, Janne Pänkälä, Dominik Brodowski.
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h> 
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+
+#include <asm/msr.h>
+#include <asm/timex.h>
+#include <asm/io.h>
+
+
+#define POWERNOW_IOPORT 0xfff0         /* it doesn't matter where, as long
+                                          as it is unused */
+
+static unsigned int                     busfreq;   /* FSB, in 10 kHz */
+static unsigned int                     max_multiplier;
+
+
+/* Clock ratio multiplied by 10 - see table 27 in AMD#23446 */
+static struct cpufreq_frequency_table clock_ratio[] = {
+        {45,  /* 000 -> 4.5x */ 0},
+        {50,  /* 001 -> 5.0x */ 0},
+        {40,  /* 010 -> 4.0x */ 0},
+        {55,  /* 011 -> 5.5x */ 0},
+        {20,  /* 100 -> 2.0x */ 0},
+        {30,  /* 101 -> 3.0x */ 0},
+        {60,  /* 110 -> 6.0x */ 0},
+        {35,  /* 111 -> 3.5x */ 0},
+        {0, CPUFREQ_TABLE_END}
+};
+
+
+/**
+ * powernow_k6_get_cpu_multiplier - returns the current FSB multiplier
+ *
+ *   Returns the current setting of the frequency multiplier. Core clock
+ * speed is frequency of the Front-Side Bus multiplied with this value.
+ */
+static int powernow_k6_get_cpu_multiplier(void)
+{
+        u64             invalue = 0;
+        u32             msrval;
+        
+        msrval = POWERNOW_IOPORT + 0x1;
+        wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */
+        invalue=inl(POWERNOW_IOPORT + 0x8);
+        msrval = POWERNOW_IOPORT + 0x0;
+        wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */
+
+        return clock_ratio[(invalue >> 5)&7].index;
+}
+
+
+/**
+ * powernow_k6_set_state - set the PowerNow! multiplier
+ * @best_i: clock_ratio[best_i] is the target multiplier
+ *
+ *   Tries to change the PowerNow! multiplier
+ */
+static void powernow_k6_set_state (unsigned int best_i)
+{
+        unsigned long           outvalue=0, invalue=0;
+        unsigned long           msrval;
+        struct cpufreq_freqs    freqs;
+
+        if (clock_ratio[best_i].index > max_multiplier) {
+                printk(KERN_ERR "cpufreq: invalid target frequency\n");
+                return;
+        }
+
+        freqs.old = busfreq * powernow_k6_get_cpu_multiplier();
+        freqs.new = busfreq * clock_ratio[best_i].index;
+        freqs.cpu = 0; /* powernow-k6.c is UP only driver */
+        
+        cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+        /* we now need to transform best_i to the BVC format, see AMD#23446 */
+
+        outvalue = (1<<12) | (1<<10) | (1<<9) | (best_i<<5);
+
+        msrval = POWERNOW_IOPORT + 0x1;
+        wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */
+        invalue=inl(POWERNOW_IOPORT + 0x8);
+        invalue = invalue & 0xf;
+        outvalue = outvalue | invalue;
+        outl(outvalue ,(POWERNOW_IOPORT + 0x8));
+        msrval = POWERNOW_IOPORT + 0x0;
+        wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */
+
+        cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+        return;
+}
+
+
+/**
+ * powernow_k6_verify - verifies a new CPUfreq policy
+ * @policy: new policy
+ *
+ * Policy must be within lowest and highest possible CPU Frequency,
+ * and at least one possible state must be within min and max.
+ */
+static int powernow_k6_verify(struct cpufreq_policy *policy)
+{
+        return cpufreq_frequency_table_verify(policy, &clock_ratio[0]);
+}
+
+
+/**
+ * powernow_k6_setpolicy - sets a new CPUFreq policy
+ * @policy: new policy
+ * @target_freq: the target frequency
+ * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
+ *
+ * sets a new CPUFreq policy
+ */
+static int powernow_k6_target (struct cpufreq_policy *policy,
+                               unsigned int target_freq,
+                               unsigned int relation)
+{
+        unsigned int    newstate = 0;
+
+        if (cpufreq_frequency_table_target(policy, &clock_ratio[0], target_freq, relation, &newstate))
+                return -EINVAL;
+
+        powernow_k6_set_state(newstate);
+
+        return 0;
+}
+
+
+static int powernow_k6_cpu_init(struct cpufreq_policy *policy)
+{
+        unsigned int i;
+        int result;
+
+        if (policy->cpu != 0)
+                return -ENODEV;
+
+        /* get frequencies */
+        max_multiplier = powernow_k6_get_cpu_multiplier();
+        busfreq = cpu_khz / max_multiplier;
+
+        /* table init */
+        for (i=0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
+                if (clock_ratio[i].index > max_multiplier)
+                        clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID;
+                else
+                        clock_ratio[i].frequency = busfreq * clock_ratio[i].index;
+        }
+
+        /* cpuinfo and default policy values */
+        policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+        policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+        policy->cur = busfreq * max_multiplier;
+
+        result = cpufreq_frequency_table_cpuinfo(policy, clock_ratio);
+        if (result)
+                return (result);
+
+        cpufreq_frequency_table_get_attr(clock_ratio, policy->cpu);
+
+        return 0;
+}
+
+
+static int powernow_k6_cpu_exit(struct cpufreq_policy *policy)
+{
+        unsigned int i;
+        for (i=0; i<8; i++) {
+                if (i==max_multiplier)
+                        powernow_k6_set_state(i);
+        }
+        cpufreq_frequency_table_put_attr(policy->cpu);
+        return 0;
+}
+
+static unsigned int powernow_k6_get(unsigned int cpu)
+{
+        return busfreq * powernow_k6_get_cpu_multiplier();
+}
+
+static struct freq_attr* powernow_k6_attr[] = {
+        &cpufreq_freq_attr_scaling_available_freqs,
+        NULL,
+};
+
+static struct cpufreq_driver powernow_k6_driver = {
+        .verify         = powernow_k6_verify,
+        .target         = powernow_k6_target,
+        .init           = powernow_k6_cpu_init,
+        .exit           = powernow_k6_cpu_exit,
+        .get            = powernow_k6_get,
+        .name           = "powernow-k6",
+        .owner          = THIS_MODULE,
+        .attr           = powernow_k6_attr,
+};
+
+
+/**
+ * powernow_k6_init - initializes the k6 PowerNow! CPUFreq driver
+ *
+ *   Initializes the K6 PowerNow! support. Returns -ENODEV on unsupported
+ * devices, -EINVAL or -ENOMEM on problems during initiatization, and zero
+ * on success.
+ */
+static int __init powernow_k6_init(void)
+{       
+        struct cpuinfo_x86      *c = cpu_data;
+
+        if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 5) ||
+                ((c->x86_model != 12) && (c->x86_model != 13)))
+                return -ENODEV;
+
+        if (!request_region(POWERNOW_IOPORT, 16, "PowerNow!")) {
+                printk("cpufreq: PowerNow IOPORT region already used.\n");
+                return -EIO;
+        }
+
+        if (cpufreq_register_driver(&powernow_k6_driver)) {
+                release_region (POWERNOW_IOPORT, 16);
+                return -EINVAL;
+        }
+
+        return 0;
+}
+
+
+/**
+ * powernow_k6_exit - unregisters AMD K6-2+/3+ PowerNow! support
+ *
+ *   Unregisters AMD K6-2+ / K6-3+ PowerNow! support.
+ */
+static void __exit powernow_k6_exit(void)
+{
+        cpufreq_unregister_driver(&powernow_k6_driver);
+        release_region (POWERNOW_IOPORT, 16);
+}
+
+
+MODULE_AUTHOR ("Arjan van de Ven <arjanv@redhat.com>, Dave Jones <davej@codemonkey.org.uk>, Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION ("PowerNow! driver for AMD K6-2+ / K6-3+ processors.");
+MODULE_LICENSE ("GPL");
+
+module_init(powernow_k6_init);
+module_exit(powernow_k6_exit);
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
new file mode 100644
index 000000000000..913f652623d9
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
@@ -0,0 +1,690 @@
+/*
+ *  AMD K7 Powernow driver.
+ *  (C) 2003 Dave Jones <davej@codemonkey.org.uk> on behalf of SuSE Labs.
+ *  (C) 2003-2004 Dave Jones <davej@redhat.com>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *  Based upon datasheets & sample CPUs kindly provided by AMD.
+ *
+ * Errata 5: Processor may fail to execute a FID/VID change in presence of interrupt.
+ * - We cli/sti on stepping A0 CPUs around the FID/VID transition.
+ * Errata 15: Processors with half frequency multipliers may hang upon wakeup from disconnect.
+ * - We disable half multipliers if ACPI is used on A0 stepping CPUs.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/dmi.h>
+
+#include <asm/msr.h>
+#include <asm/timex.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
+#include <linux/acpi.h>
+#include <acpi/processor.h>
+#endif
+
+#include "powernow-k7.h"
+
+#define PFX "powernow: "
+
+
+struct psb_s {
+        u8 signature[10];
+        u8 tableversion;
+        u8 flags;
+        u16 settlingtime;
+        u8 reserved1;
+        u8 numpst;
+};
+
+struct pst_s {
+        u32 cpuid;
+        u8 fsbspeed;
+        u8 maxfid;
+        u8 startvid;
+        u8 numpstates;
+};
+
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
+union powernow_acpi_control_t {
+        struct {
+                unsigned long fid:5,
+                vid:5,
+                sgtc:20,
+                res1:2;
+        } bits;
+        unsigned long val;
+};
+#endif
+
+#ifdef CONFIG_CPU_FREQ_DEBUG
+/* divide by 1000 to get VCore voltage in V. */
+static int mobile_vid_table[32] = {
+    2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650,
+    1600, 1550, 1500, 1450, 1400, 1350, 1300, 0,
+    1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100,
+    1075, 1050, 1025, 1000, 975, 950, 925, 0,
+};
+#endif
+
+/* divide by 10 to get FID. */
+static int fid_codes[32] = {
+    110, 115, 120, 125, 50, 55, 60, 65,
+    70, 75, 80, 85, 90, 95, 100, 105,
+    30, 190, 40, 200, 130, 135, 140, 210,
+    150, 225, 160, 165, 170, 180, -1, -1,
+};
+
+/* This parameter is used in order to force ACPI instead of legacy method for
+ * configuration purpose.
+ */
+
+static int acpi_force;
+
+static struct cpufreq_frequency_table *powernow_table;
+
+static unsigned int can_scale_bus;
+static unsigned int can_scale_vid;
+static unsigned int minimum_speed=-1;
+static unsigned int maximum_speed;
+static unsigned int number_scales;
+static unsigned int fsb;
+static unsigned int latency;
+static char have_a0;
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k7", msg)
+
+static int check_fsb(unsigned int fsbspeed)
+{
+        int delta;
+        unsigned int f = fsb / 1000;
+
+        delta = (fsbspeed > f) ? fsbspeed - f : f - fsbspeed;
+        return (delta < 5);
+}
+
+static int check_powernow(void)
+{
+        struct cpuinfo_x86 *c = cpu_data;
+        unsigned int maxei, eax, ebx, ecx, edx;
+
+        if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 !=6)) {
+#ifdef MODULE
+                printk (KERN_INFO PFX "This module only works with AMD K7 CPUs\n");
+#endif
+                return 0;
+        }
+
+        /* Get maximum capabilities */
+        maxei = cpuid_eax (0x80000000);
+        if (maxei < 0x80000007) {       /* Any powernow info ? */
+#ifdef MODULE
+                printk (KERN_INFO PFX "No powernow capabilities detected\n");
+#endif
+                return 0;
+        }
+
+        if ((c->x86_model == 6) && (c->x86_mask == 0)) {
+                printk (KERN_INFO PFX "K7 660[A0] core detected, enabling errata workarounds\n");
+                have_a0 = 1;
+        }
+
+        cpuid(0x80000007, &eax, &ebx, &ecx, &edx);
+
+        /* Check we can actually do something before we say anything.*/
+        if (!(edx & (1 << 1 | 1 << 2)))
+                return 0;
+
+        printk (KERN_INFO PFX "PowerNOW! Technology present. Can scale: ");
+
+        if (edx & 1 << 1) {
+                printk ("frequency");
+                can_scale_bus=1;
+        }
+
+        if ((edx & (1 << 1 | 1 << 2)) == 0x6)
+                printk (" and ");
+
+        if (edx & 1 << 2) {
+                printk ("voltage");
+                can_scale_vid=1;
+        }
+
+        printk (".\n");
+        return 1;
+}
+
+
+static int get_ranges (unsigned char *pst)
+{
+        unsigned int j;
+        unsigned int speed;
+        u8 fid, vid;
+
+        powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table) * (number_scales + 1)), GFP_KERNEL);
+        if (!powernow_table)
+                return -ENOMEM;
+        memset(powernow_table, 0, (sizeof(struct cpufreq_frequency_table) * (number_scales + 1)));
+
+        for (j=0 ; j < number_scales; j++) {
+                fid = *pst++;
+
+                powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10;
+                powernow_table[j].index = fid; /* lower 8 bits */
+
+                speed = powernow_table[j].frequency;
+
+                if ((fid_codes[fid] % 10)==5) {
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
+                        if (have_a0 == 1)
+                                powernow_table[j].frequency = CPUFREQ_ENTRY_INVALID;
+#endif
+                }
+
+                if (speed < minimum_speed)
+                        minimum_speed = speed;
+                if (speed > maximum_speed)
+                        maximum_speed = speed;
+
+                vid = *pst++;
+                powernow_table[j].index |= (vid << 8); /* upper 8 bits */
+
+                dprintk ("   FID: 0x%x (%d.%dx [%dMHz])  "
+                         "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, 
+                         fid_codes[fid] % 10, speed/1000, vid,  
+                         mobile_vid_table[vid]/1000,
+                         mobile_vid_table[vid]%1000);
+        }
+        powernow_table[number_scales].frequency = CPUFREQ_TABLE_END;
+        powernow_table[number_scales].index = 0;
+
+        return 0;
+}
+
+
+static void change_FID(int fid)
+{
+        union msr_fidvidctl fidvidctl;
+
+        rdmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
+        if (fidvidctl.bits.FID != fid) {
+                fidvidctl.bits.SGTC = latency;
+                fidvidctl.bits.FID = fid;
+                fidvidctl.bits.VIDC = 0;
+                fidvidctl.bits.FIDC = 1;
+                wrmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
+        }
+}
+
+
+static void change_VID(int vid)
+{
+        union msr_fidvidctl fidvidctl;
+
+        rdmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
+        if (fidvidctl.bits.VID != vid) {
+                fidvidctl.bits.SGTC = latency;
+                fidvidctl.bits.VID = vid;
+                fidvidctl.bits.FIDC = 0;
+                fidvidctl.bits.VIDC = 1;
+                wrmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
+        }
+}
+
+
+static void change_speed (unsigned int index)
+{
+        u8 fid, vid;
+        struct cpufreq_freqs freqs;
+        union msr_fidvidstatus fidvidstatus;
+        int cfid;
+
+        /* fid are the lower 8 bits of the index we stored into
+         * the cpufreq frequency table in powernow_decode_bios,
+         * vid are the upper 8 bits.
+         */
+
+        fid = powernow_table[index].index & 0xFF;
+        vid = (powernow_table[index].index & 0xFF00) >> 8;
+
+        freqs.cpu = 0;
+
+        rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val);
+        cfid = fidvidstatus.bits.CFID;
+        freqs.old = fsb * fid_codes[cfid] / 10;
+
+        freqs.new = powernow_table[index].frequency;
+
+        cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+        /* Now do the magic poking into the MSRs.  */
+
+        if (have_a0 == 1)       /* A0 errata 5 */
+                local_irq_disable();
+
+        if (freqs.old > freqs.new) {
+                /* Going down, so change FID first */
+                change_FID(fid);
+                change_VID(vid);
+        } else {
+                /* Going up, so change VID first */
+                change_VID(vid);
+                change_FID(fid);
+        }
+
+
+        if (have_a0 == 1)
+                local_irq_enable();
+
+        cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+}
+
+
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
+
+static struct acpi_processor_performance *acpi_processor_perf;
+
+static int powernow_acpi_init(void)
+{
+        int i;
+        int retval = 0;
+        union powernow_acpi_control_t pc;
+
+        if (acpi_processor_perf != NULL && powernow_table != NULL) {
+                retval = -EINVAL;
+                goto err0;
+        }
+
+        acpi_processor_perf = kmalloc(sizeof(struct acpi_processor_performance),
+                                      GFP_KERNEL);
+
+        if (!acpi_processor_perf) {
+                retval = -ENOMEM;
+                goto err0;
+        }
+
+        memset(acpi_processor_perf, 0, sizeof(struct acpi_processor_performance));
+
+        if (acpi_processor_register_performance(acpi_processor_perf, 0)) {
+                retval = -EIO;
+                goto err1;
+        }
+
+        if (acpi_processor_perf->control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) {
+                retval = -ENODEV;
+                goto err2;
+        }
+
+        if (acpi_processor_perf->status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) {
+                retval = -ENODEV;
+                goto err2;
+        }
+
+        number_scales = acpi_processor_perf->state_count;
+
+        if (number_scales < 2) {
+                retval = -ENODEV;
+                goto err2;
+        }
+
+        powernow_table = kmalloc((number_scales + 1) * (sizeof(struct cpufreq_frequency_table)), GFP_KERNEL);
+        if (!powernow_table) {
+                retval = -ENOMEM;
+                goto err2;
+        }
+
+        memset(powernow_table, 0, ((number_scales + 1) * sizeof(struct cpufreq_frequency_table)));
+
+        pc.val = (unsigned long) acpi_processor_perf->states[0].control;
+        for (i = 0; i < number_scales; i++) {
+                u8 fid, vid;
+                unsigned int speed;
+
+                pc.val = (unsigned long) acpi_processor_perf->states[i].control;
+                dprintk ("acpi:  P%d: %d MHz %d mW %d uS control %08x SGTC %d\n",
+                         i,
+                         (u32) acpi_processor_perf->states[i].core_frequency,
+                         (u32) acpi_processor_perf->states[i].power,
+                         (u32) acpi_processor_perf->states[i].transition_latency,
+                         (u32) acpi_processor_perf->states[i].control,
+                         pc.bits.sgtc);
+
+                vid = pc.bits.vid;
+                fid = pc.bits.fid;
+
+                powernow_table[i].frequency = fsb * fid_codes[fid] / 10;
+                powernow_table[i].index = fid; /* lower 8 bits */
+                powernow_table[i].index |= (vid << 8); /* upper 8 bits */
+
+                speed = powernow_table[i].frequency;
+
+                if ((fid_codes[fid] % 10)==5) {
+                        if (have_a0 == 1)
+                                powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+                }
+
+                dprintk ("   FID: 0x%x (%d.%dx [%dMHz])  "
+                         "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, 
+                         fid_codes[fid] % 10, speed/1000, vid,  
+                         mobile_vid_table[vid]/1000,
+                         mobile_vid_table[vid]%1000);
+
+                if (latency < pc.bits.sgtc)
+                        latency = pc.bits.sgtc;
+
+                if (speed < minimum_speed)
+                        minimum_speed = speed;
+                if (speed > maximum_speed)
+                        maximum_speed = speed;
+        }
+
+        powernow_table[i].frequency = CPUFREQ_TABLE_END;
+        powernow_table[i].index = 0;
+
+        /* notify BIOS that we exist */
+        acpi_processor_notify_smm(THIS_MODULE);
+
+        return 0;
+
+err2:
+        acpi_processor_unregister_performance(acpi_processor_perf, 0);
+err1:
+        kfree(acpi_processor_perf);
+err0:
+        printk(KERN_WARNING PFX "ACPI perflib can not be used in this platform\n");
+        acpi_processor_perf = NULL;
+        return retval;
+}
+#else
+static int powernow_acpi_init(void)
+{
+        printk(KERN_INFO PFX "no support for ACPI processor found."
+               "  Please recompile your kernel with ACPI processor\n");
+        return -EINVAL;
+}
+#endif
+
+static int powernow_decode_bios (int maxfid, int startvid)
+{
+        struct psb_s *psb;
+        struct pst_s *pst;
+        unsigned int i, j;
+        unsigned char *p;
+        unsigned int etuple;
+        unsigned int ret;
+
+        etuple = cpuid_eax(0x80000001);
+
+        for (i=0xC0000; i < 0xffff0 ; i+=16) {
+
+                p = phys_to_virt(i);
+
+                if (memcmp(p, "AMDK7PNOW!",  10) == 0){
+                        dprintk ("Found PSB header at %p\n", p);
+                        psb = (struct psb_s *) p;
+                        dprintk ("Table version: 0x%x\n", psb->tableversion);
+                        if (psb->tableversion != 0x12) {
+                                printk (KERN_INFO PFX "Sorry, only v1.2 tables supported right now\n");
+                                return -ENODEV;
+                        }
+
+                        dprintk ("Flags: 0x%x\n", psb->flags);
+                        if ((psb->flags & 1)==0) {
+                                dprintk ("Mobile voltage regulator\n");
+                        } else {
+                                dprintk ("Desktop voltage regulator\n");
+                        }
+
+                        latency = psb->settlingtime;
+                        if (latency < 100) {
+                                printk (KERN_INFO PFX "BIOS set settling time to %d microseconds."
+                                                "Should be at least 100. Correcting.\n", latency);
+                                latency = 100;
+                        }
+                        dprintk ("Settling Time: %d microseconds.\n", psb->settlingtime);
+                        dprintk ("Has %d PST tables. (Only dumping ones relevant to this CPU).\n", psb->numpst);
+
+                        p += sizeof (struct psb_s);
+
+                        pst = (struct pst_s *) p;
+
+                        for (i = 0 ; i <psb->numpst; i++) {
+                                pst = (struct pst_s *) p;
+                                number_scales = pst->numpstates;
+
+                                if ((etuple == pst->cpuid) && check_fsb(pst->fsbspeed) &&
+                                    (maxfid==pst->maxfid) && (startvid==pst->startvid))
+                                {
+                                        dprintk ("PST:%d (@%p)\n", i, pst);
+                                        dprintk (" cpuid: 0x%x  fsb: %d  maxFID: 0x%x  startvid: 0x%x\n", 
+                                                 pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid);
+
+                                        ret = get_ranges ((char *) pst + sizeof (struct pst_s));
+                                        return ret;
+
+                                } else {
+                                        p = (char *) pst + sizeof (struct pst_s);
+                                        for (j=0 ; j < number_scales; j++)
+                                                p+=2;
+                                }
+                        }
+                        printk (KERN_INFO PFX "No PST tables match this cpuid (0x%x)\n", etuple);
+                        printk (KERN_INFO PFX "This is indicative of a broken BIOS.\n");
+
+                        return -EINVAL;
+                }
+                p++;
+        }
+
+        return -ENODEV;
+}
+
+
+static int powernow_target (struct cpufreq_policy *policy,
+                            unsigned int target_freq,
+                            unsigned int relation)
+{
+        unsigned int newstate;
+
+        if (cpufreq_frequency_table_target(policy, powernow_table, target_freq, relation, &newstate))
+                return -EINVAL;
+
+        change_speed(newstate);
+
+        return 0;
+}
+
+
+static int powernow_verify (struct cpufreq_policy *policy)
+{
+        return cpufreq_frequency_table_verify(policy, powernow_table);
+}
+
+/*
+ * We use the fact that the bus frequency is somehow
+ * a multiple of 100000/3 khz, then we compute sgtc according
+ * to this multiple.
+ * That way, we match more how AMD thinks all of that work.
+ * We will then get the same kind of behaviour already tested under
+ * the "well-known" other OS.
+ */
+static int __init fixup_sgtc(void)
+{
+        unsigned int sgtc;
+        unsigned int m;
+
+        m = fsb / 3333;
+        if ((m % 10) >= 5)
+                m += 5;
+
+        m /= 10;
+
+        sgtc = 100 * m * latency;
+        sgtc = sgtc / 3;
+        if (sgtc > 0xfffff) {
+                printk(KERN_WARNING PFX "SGTC too large %d\n", sgtc);
+                sgtc = 0xfffff;
+        }
+        return sgtc;
+}
+
+static unsigned int powernow_get(unsigned int cpu)
+{
+        union msr_fidvidstatus fidvidstatus;
+        unsigned int cfid;
+
+        if (cpu)
+                return 0;
+        rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val);
+        cfid = fidvidstatus.bits.CFID;
+
+        return (fsb * fid_codes[cfid] / 10);
+}
+
+
+static int __init acer_cpufreq_pst(struct dmi_system_id *d)
+{
+        printk(KERN_WARNING "%s laptop with broken PST tables in BIOS detected.\n", d->ident);
+        printk(KERN_WARNING "You need to downgrade to 3A21 (09/09/2002), or try a newer BIOS than 3A71 (01/20/2003)\n");
+        printk(KERN_WARNING "cpufreq scaling has been disabled as a result of this.\n");
+        return 0;
+}
+
+/*
+ * Some Athlon laptops have really fucked PST tables.
+ * A BIOS update is all that can save them.
+ * Mention this, and disable cpufreq.
+ */
+static struct dmi_system_id __initdata powernow_dmi_table[] = {
+        {
+                .callback = acer_cpufreq_pst,
+                .ident = "Acer Aspire",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "Insyde Software"),
+                        DMI_MATCH(DMI_BIOS_VERSION, "3A71"),
+                },
+        },
+        { }
+};
+
+static int __init powernow_cpu_init (struct cpufreq_policy *policy)
+{
+        union msr_fidvidstatus fidvidstatus;
+        int result;
+
+        if (policy->cpu != 0)
+                return -ENODEV;
+
+        rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val);
+
+        /* A K7 with powernow technology is set to max frequency by BIOS */
+        fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.MFID];
+        if (!fsb) {
+                printk(KERN_WARNING PFX "can not determine bus frequency\n");
+                return -EINVAL;
+        }
+        dprintk("FSB: %3d.%03d MHz\n", fsb/1000, fsb%1000);
+
+        if (dmi_check_system(powernow_dmi_table) || acpi_force) {
+                printk (KERN_INFO PFX "PSB/PST known to be broken.  Trying ACPI instead\n");
+                result = powernow_acpi_init();
+        } else {
+                result = powernow_decode_bios(fidvidstatus.bits.MFID, fidvidstatus.bits.SVID);
+                if (result) {
+                        printk (KERN_INFO PFX "Trying ACPI perflib\n");
+                        maximum_speed = 0;
+                        minimum_speed = -1;
+                        latency = 0;
+                        result = powernow_acpi_init();
+                        if (result) {
+                                printk (KERN_INFO PFX "ACPI and legacy methods failed\n");
+                                printk (KERN_INFO PFX "See http://www.codemonkey.org.uk/projects/cpufreq/powernow-k7.shtml\n");
+                        }
+                } else {
+                        /* SGTC use the bus clock as timer */
+                        latency = fixup_sgtc();
+                        printk(KERN_INFO PFX "SGTC: %d\n", latency);
+                }
+        }
+
+        if (result)
+                return result;
+
+        printk (KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n",
+                                minimum_speed/1000, maximum_speed/1000);
+
+        policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+        policy->cpuinfo.transition_latency = cpufreq_scale(2000000UL, fsb, latency);
+
+        policy->cur = powernow_get(0);
+
+        cpufreq_frequency_table_get_attr(powernow_table, policy->cpu);
+
+        return cpufreq_frequency_table_cpuinfo(policy, powernow_table);
+}
+
+static int powernow_cpu_exit (struct cpufreq_policy *policy) {
+        cpufreq_frequency_table_put_attr(policy->cpu);
+
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
+        if (acpi_processor_perf) {
+                acpi_processor_unregister_performance(acpi_processor_perf, 0);
+                kfree(acpi_processor_perf);
+        }
+#endif
+
+        if (powernow_table)
+                kfree(powernow_table);
+
+        return 0;
+}
+
+static struct freq_attr* powernow_table_attr[] = {
+        &cpufreq_freq_attr_scaling_available_freqs,
+        NULL,
+};
+
+static struct cpufreq_driver powernow_driver = {
+        .verify = powernow_verify,
+        .target = powernow_target,
+        .get    = powernow_get,
+        .init   = powernow_cpu_init,
+        .exit   = powernow_cpu_exit,
+        .name   = "powernow-k7",
+        .owner  = THIS_MODULE,
+        .attr   = powernow_table_attr,
+};
+
+static int __init powernow_init (void)
+{
+        if (check_powernow()==0)
+                return -ENODEV;
+        return cpufreq_register_driver(&powernow_driver);
+}
+
+
+static void __exit powernow_exit (void)
+{
+        cpufreq_unregister_driver(&powernow_driver);
+}
+
+module_param(acpi_force,  int, 0444);
+MODULE_PARM_DESC(acpi_force, "Force ACPI to be used.");
+
+MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>");
+MODULE_DESCRIPTION ("Powernow driver for AMD K7 processors.");
+MODULE_LICENSE ("GPL");
+
+late_initcall(powernow_init);
+module_exit(powernow_exit);
+
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k7.h b/arch/i386/kernel/cpu/cpufreq/powernow-k7.h
new file mode 100644
index 000000000000..f8a63b3664e3
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k7.h
@@ -0,0 +1,44 @@
+/*
+ *  $Id: powernow-k7.h,v 1.2 2003/02/10 18:26:01 davej Exp $
+ *  (C) 2003 Dave Jones.
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  AMD-specific information
+ *
+ */
+
+union msr_fidvidctl {
+        struct {
+                unsigned FID:5,                 // 4:0
+                reserved1:3,    // 7:5
+                VID:5,                  // 12:8
+                reserved2:3,    // 15:13
+                FIDC:1,                 // 16
+                VIDC:1,                 // 17
+                reserved3:2,    // 19:18
+                FIDCHGRATIO:1,  // 20
+                reserved4:11,   // 31-21
+                SGTC:20,                // 32:51
+                reserved5:12;   // 63:52
+        } bits;
+        unsigned long long val;
+};
+
+union msr_fidvidstatus {
+        struct {
+                unsigned CFID:5,                        // 4:0
+                reserved1:3,    // 7:5
+                SFID:5,                 // 12:8
+                reserved2:3,    // 15:13
+                MFID:5,                 // 20:16
+                reserved3:11,   // 31:21
+                CVID:5,                 // 36:32
+                reserved4:3,    // 39:37
+                SVID:5,                 // 44:40
+                reserved5:3,    // 47:45
+                MVID:5,                 // 52:48
+                reserved6:11;   // 63:53
+        } bits;
+        unsigned long long val;
+};
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
new file mode 100644
index 000000000000..a65ff7e32e5d
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
@@ -0,0 +1,1135 @@
+/*
+ *   (c) 2003, 2004 Advanced Micro Devices, Inc.
+ *  Your use of this code is subject to the terms and conditions of the
+ *  GNU general public license version 2. See "COPYING" or
+ *  http://www.gnu.org/licenses/gpl.html
+ *
+ *  Support : paul.devriendt@amd.com
+ *
+ *  Based on the powernow-k7.c module written by Dave Jones.
+ *  (C) 2003 Dave Jones <davej@codemonkey.org.uk> on behalf of SuSE Labs
+ *  (C) 2004 Dominik Brodowski <linux@brodo.de>
+ *  (C) 2004 Pavel Machek <pavel@suse.cz>
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *  Based upon datasheets & sample CPUs kindly provided by AMD.
+ *
+ *  Valuable input gratefully received from Dave Jones, Pavel Machek,
+ *  Dominik Brodowski, and others.
+ *  Processor information obtained from Chapter 9 (Power and Thermal Management)
+ *  of the "BIOS and Kernel Developer's Guide for the AMD Athlon 64 and AMD
+ *  Opteron Processors" available for download from www.amd.com
+ *
+ *  Tables for specific CPUs can be infrerred from
+ *      http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/30430.pdf
+ */
+
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+#include <asm/msr.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+
+#ifdef CONFIG_X86_POWERNOW_K8_ACPI
+#include <linux/acpi.h>
+#include <acpi/processor.h>
+#endif
+
+#define PFX "powernow-k8: "
+#define BFX PFX "BIOS error: "
+#define VERSION "version 1.00.09e"
+#include "powernow-k8.h"
+
+/* serialize freq changes  */
+static DECLARE_MUTEX(fidvid_sem);
+
+static struct powernow_k8_data *powernow_data[NR_CPUS];
+
+/* Return a frequency in MHz, given an input fid */
+static u32 find_freq_from_fid(u32 fid)
+{
+        return 800 + (fid * 100);
+}
+
+/* Return a frequency in KHz, given an input fid */
+static u32 find_khz_freq_from_fid(u32 fid)
+{
+        return 1000 * find_freq_from_fid(fid);
+}
+
+/* Return a voltage in miliVolts, given an input vid */
+static u32 find_millivolts_from_vid(struct powernow_k8_data *data, u32 vid)
+{
+        return 1550-vid*25;
+}
+
+/* Return the vco fid for an input fid
+ *
+ * Each "low" fid has corresponding "high" fid, and you can get to "low" fids
+ * only from corresponding high fids. This returns "high" fid corresponding to
+ * "low" one.
+ */
+static u32 convert_fid_to_vco_fid(u32 fid)
+{
+        if (fid < HI_FID_TABLE_BOTTOM) {
+                return 8 + (2 * fid);
+        } else {
+                return fid;
+        }
+}
+
+/*
+ * Return 1 if the pending bit is set. Unless we just instructed the processor
+ * to transition to a new state, seeing this bit set is really bad news.
+ */
+static int pending_bit_stuck(void)
+{
+        u32 lo, hi;
+
+        rdmsr(MSR_FIDVID_STATUS, lo, hi);
+        return lo & MSR_S_LO_CHANGE_PENDING ? 1 : 0;
+}
+
+/*
+ * Update the global current fid / vid values from the status msr.
+ * Returns 1 on error.
+ */
+static int query_current_values_with_pending_wait(struct powernow_k8_data *data)
+{
+        u32 lo, hi;
+        u32 i = 0;
+
+        lo = MSR_S_LO_CHANGE_PENDING;
+        while (lo & MSR_S_LO_CHANGE_PENDING) {
+                if (i++ > 0x1000000) {
+                        printk(KERN_ERR PFX "detected change pending stuck\n");
+                        return 1;
+                }
+                rdmsr(MSR_FIDVID_STATUS, lo, hi);
+        }
+
+        data->currvid = hi & MSR_S_HI_CURRENT_VID;
+        data->currfid = lo & MSR_S_LO_CURRENT_FID;
+
+        return 0;
+}
+
+/* the isochronous relief time */
+static void count_off_irt(struct powernow_k8_data *data)
+{
+        udelay((1 << data->irt) * 10);
+        return;
+}
+
+/* the voltage stabalization time */
+static void count_off_vst(struct powernow_k8_data *data)
+{
+        udelay(data->vstable * VST_UNITS_20US);
+        return;
+}
+
+/* need to init the control msr to a safe value (for each cpu) */
+static void fidvid_msr_init(void)
+{
+        u32 lo, hi;
+        u8 fid, vid;
+
+        rdmsr(MSR_FIDVID_STATUS, lo, hi);
+        vid = hi & MSR_S_HI_CURRENT_VID;
+        fid = lo & MSR_S_LO_CURRENT_FID;
+        lo = fid | (vid << MSR_C_LO_VID_SHIFT);
+        hi = MSR_C_HI_STP_GNT_BENIGN;
+        dprintk("cpu%d, init lo 0x%x, hi 0x%x\n", smp_processor_id(), lo, hi);
+        wrmsr(MSR_FIDVID_CTL, lo, hi);
+}
+
+
+/* write the new fid value along with the other control fields to the msr */
+static int write_new_fid(struct powernow_k8_data *data, u32 fid)
+{
+        u32 lo;
+        u32 savevid = data->currvid;
+
+        if ((fid & INVALID_FID_MASK) || (data->currvid & INVALID_VID_MASK)) {
+                printk(KERN_ERR PFX "internal error - overflow on fid write\n");
+                return 1;
+        }
+
+        lo = fid | (data->currvid << MSR_C_LO_VID_SHIFT) | MSR_C_LO_INIT_FID_VID;
+
+        dprintk("writing fid 0x%x, lo 0x%x, hi 0x%x\n",
+                fid, lo, data->plllock * PLL_LOCK_CONVERSION);
+
+        wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION);
+
+        if (query_current_values_with_pending_wait(data))
+                return 1;
+
+        count_off_irt(data);
+
+        if (savevid != data->currvid) {
+                printk(KERN_ERR PFX "vid change on fid trans, old 0x%x, new 0x%x\n",
+                       savevid, data->currvid);
+                return 1;
+        }
+
+        if (fid != data->currfid) {
+                printk(KERN_ERR PFX "fid trans failed, fid 0x%x, curr 0x%x\n", fid,
+                        data->currfid);
+                return 1;
+        }
+
+        return 0;
+}
+
+/* Write a new vid to the hardware */
+static int write_new_vid(struct powernow_k8_data *data, u32 vid)
+{
+        u32 lo;
+        u32 savefid = data->currfid;
+
+        if ((data->currfid & INVALID_FID_MASK) || (vid & INVALID_VID_MASK)) {
+                printk(KERN_ERR PFX "internal error - overflow on vid write\n");
+                return 1;
+        }
+
+        lo = data->currfid | (vid << MSR_C_LO_VID_SHIFT) | MSR_C_LO_INIT_FID_VID;
+
+        dprintk("writing vid 0x%x, lo 0x%x, hi 0x%x\n",
+                vid, lo, STOP_GRANT_5NS);
+
+        wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS);
+
+        if (query_current_values_with_pending_wait(data))
+                return 1;
+
+        if (savefid != data->currfid) {
+                printk(KERN_ERR PFX "fid changed on vid trans, old 0x%x new 0x%x\n",
+                       savefid, data->currfid);
+                return 1;
+        }
+
+        if (vid != data->currvid) {
+                printk(KERN_ERR PFX "vid trans failed, vid 0x%x, curr 0x%x\n", vid,
+                                data->currvid);
+                return 1;
+        }
+
+        return 0;
+}
+
+/*
+ * Reduce the vid by the max of step or reqvid.
+ * Decreasing vid codes represent increasing voltages:
+ * vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of 0x1f is off.
+ */
+static int decrease_vid_code_by_step(struct powernow_k8_data *data, u32 reqvid, u32 step)
+{
+        if ((data->currvid - reqvid) > step)
+                reqvid = data->currvid - step;
+
+        if (write_new_vid(data, reqvid))
+                return 1;
+
+        count_off_vst(data);
+
+        return 0;
+}
+
+/* Change the fid and vid, by the 3 phases. */
+static int transition_fid_vid(struct powernow_k8_data *data, u32 reqfid, u32 reqvid)
+{
+        if (core_voltage_pre_transition(data, reqvid))
+                return 1;
+
+        if (core_frequency_transition(data, reqfid))
+                return 1;
+
+        if (core_voltage_post_transition(data, reqvid))
+                return 1;
+
+        if (query_current_values_with_pending_wait(data))
+                return 1;
+
+        if ((reqfid != data->currfid) || (reqvid != data->currvid)) {
+                printk(KERN_ERR PFX "failed (cpu%d): req 0x%x 0x%x, curr 0x%x 0x%x\n",
+                                smp_processor_id(),
+                                reqfid, reqvid, data->currfid, data->currvid);
+                return 1;
+        }
+
+        dprintk("transitioned (cpu%d): new fid 0x%x, vid 0x%x\n",
+                smp_processor_id(), data->currfid, data->currvid);
+
+        return 0;
+}
+
+/* Phase 1 - core voltage transition ... setup voltage */
+static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid)
+{
+        u32 rvosteps = data->rvo;
+        u32 savefid = data->currfid;
+
+        dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, reqvid 0x%x, rvo 0x%x\n",
+                smp_processor_id(),
+                data->currfid, data->currvid, reqvid, data->rvo);
+
+        while (data->currvid > reqvid) {
+                dprintk("ph1: curr 0x%x, req vid 0x%x\n",
+                        data->currvid, reqvid);
+                if (decrease_vid_code_by_step(data, reqvid, data->vidmvs))
+                        return 1;
+        }
+
+        while ((rvosteps > 0)  && ((data->rvo + data->currvid) > reqvid)) {
+                if (data->currvid == 0) {
+                        rvosteps = 0;
+                } else {
+                        dprintk("ph1: changing vid for rvo, req 0x%x\n",
+                                data->currvid - 1);
+                        if (decrease_vid_code_by_step(data, data->currvid - 1, 1))
+                                return 1;
+                        rvosteps--;
+                }
+        }
+
+        if (query_current_values_with_pending_wait(data))
+                return 1;
+
+        if (savefid != data->currfid) {
+                printk(KERN_ERR PFX "ph1 err, currfid changed 0x%x\n", data->currfid);
+                return 1;
+        }
+
+        dprintk("ph1 complete, currfid 0x%x, currvid 0x%x\n",
+                data->currfid, data->currvid);
+
+        return 0;
+}
+
+/* Phase 2 - core frequency transition */
+static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
+{
+        u32 vcoreqfid, vcocurrfid, vcofiddiff, savevid = data->currvid;
+
+        if ((reqfid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) {
+                printk(KERN_ERR PFX "ph2: illegal lo-lo transition 0x%x 0x%x\n",
+                        reqfid, data->currfid);
+                return 1;
+        }
+
+        if (data->currfid == reqfid) {
+                printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n", data->currfid);
+                return 0;
+        }
+
+        dprintk("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, reqfid 0x%x\n",
+                smp_processor_id(),
+                data->currfid, data->currvid, reqfid);
+
+        vcoreqfid = convert_fid_to_vco_fid(reqfid);
+        vcocurrfid = convert_fid_to_vco_fid(data->currfid);
+        vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid
+            : vcoreqfid - vcocurrfid;
+
+        while (vcofiddiff > 2) {
+                if (reqfid > data->currfid) {
+                        if (data->currfid > LO_FID_TABLE_TOP) {
+                                if (write_new_fid(data, data->currfid + 2)) {
+                                        return 1;
+                                }
+                        } else {
+                                if (write_new_fid
+                                    (data, 2 + convert_fid_to_vco_fid(data->currfid))) {
+                                        return 1;
+                                }
+                        }
+                } else {
+                        if (write_new_fid(data, data->currfid - 2))
+                                return 1;
+                }
+
+                vcocurrfid = convert_fid_to_vco_fid(data->currfid);
+                vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid
+                    : vcoreqfid - vcocurrfid;
+        }
+
+        if (write_new_fid(data, reqfid))
+                return 1;
+
+        if (query_current_values_with_pending_wait(data))
+                return 1;
+
+        if (data->currfid != reqfid) {
+                printk(KERN_ERR PFX
+                        "ph2: mismatch, failed fid transition, curr 0x%x, req 0x%x\n",
+                        data->currfid, reqfid);
+                return 1;
+        }
+
+        if (savevid != data->currvid) {
+                printk(KERN_ERR PFX "ph2: vid changed, save 0x%x, curr 0x%x\n",
+                        savevid, data->currvid);
+                return 1;
+        }
+
+        dprintk("ph2 complete, currfid 0x%x, currvid 0x%x\n",
+                data->currfid, data->currvid);
+
+        return 0;
+}
+
+/* Phase 3 - core voltage transition flow ... jump to the final vid. */
+static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid)
+{
+        u32 savefid = data->currfid;
+        u32 savereqvid = reqvid;
+
+        dprintk("ph3 (cpu%d): starting, currfid 0x%x, currvid 0x%x\n",
+                smp_processor_id(),
+                data->currfid, data->currvid);
+
+        if (reqvid != data->currvid) {
+                if (write_new_vid(data, reqvid))
+                        return 1;
+
+                if (savefid != data->currfid) {
+                        printk(KERN_ERR PFX
+                               "ph3: bad fid change, save 0x%x, curr 0x%x\n",
+                               savefid, data->currfid);
+                        return 1;
+                }
+
+                if (data->currvid != reqvid) {
+                        printk(KERN_ERR PFX
+                               "ph3: failed vid transition\n, req 0x%x, curr 0x%x",
+                               reqvid, data->currvid);
+                        return 1;
+                }
+        }
+
+        if (query_current_values_with_pending_wait(data))
+                return 1;
+
+        if (savereqvid != data->currvid) {
+                dprintk("ph3 failed, currvid 0x%x\n", data->currvid);
+                return 1;
+        }
+
+        if (savefid != data->currfid) {
+                dprintk("ph3 failed, currfid changed 0x%x\n",
+                        data->currfid);
+                return 1;
+        }
+
+        dprintk("ph3 complete, currfid 0x%x, currvid 0x%x\n",
+                data->currfid, data->currvid);
+
+        return 0;
+}
+
+static int check_supported_cpu(unsigned int cpu)
+{
+        cpumask_t oldmask = CPU_MASK_ALL;
+        u32 eax, ebx, ecx, edx;
+        unsigned int rc = 0;
+
+        oldmask = current->cpus_allowed;
+        set_cpus_allowed(current, cpumask_of_cpu(cpu));
+        schedule();
+
+        if (smp_processor_id() != cpu) {
+                printk(KERN_ERR "limiting to cpu %u failed\n", cpu);
+                goto out;
+        }
+
+        if (current_cpu_data.x86_vendor != X86_VENDOR_AMD)
+                goto out;
+
+        eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
+        if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) ||
+            ((eax & CPUID_XFAM) != CPUID_XFAM_K8) ||
+            ((eax & CPUID_XMOD) > CPUID_XMOD_REV_E)) {
+                printk(KERN_INFO PFX "Processor cpuid %x not supported\n", eax);
+                goto out;
+        }
+
+        eax = cpuid_eax(CPUID_GET_MAX_CAPABILITIES);
+        if (eax < CPUID_FREQ_VOLT_CAPABILITIES) {
+                printk(KERN_INFO PFX
+                       "No frequency change capabilities detected\n");
+                goto out;
+        }
+
+        cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx);
+        if ((edx & P_STATE_TRANSITION_CAPABLE) != P_STATE_TRANSITION_CAPABLE) {
+                printk(KERN_INFO PFX "Power state transitions not supported\n");
+                goto out;
+        }
+
+        rc = 1;
+
+out:
+        set_cpus_allowed(current, oldmask);
+        schedule();
+        return rc;
+
+}
+
+static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, u8 maxvid)
+{
+        unsigned int j;
+        u8 lastfid = 0xff;
+
+        for (j = 0; j < data->numps; j++) {
+                if (pst[j].vid > LEAST_VID) {
+                        printk(KERN_ERR PFX "vid %d invalid : 0x%x\n", j, pst[j].vid);
+                        return -EINVAL;
+                }
+                if (pst[j].vid < data->rvo) {   /* vid + rvo >= 0 */
+                        printk(KERN_ERR BFX "0 vid exceeded with pstate %d\n", j);
+                        return -ENODEV;
+                }
+                if (pst[j].vid < maxvid + data->rvo) {  /* vid + rvo >= maxvid */
+                        printk(KERN_ERR BFX "maxvid exceeded with pstate %d\n", j);
+                        return -ENODEV;
+                }
+                if ((pst[j].fid > MAX_FID)
+                    || (pst[j].fid & 1)
+                    || (j && (pst[j].fid < HI_FID_TABLE_BOTTOM))) {
+                        /* Only first fid is allowed to be in "low" range */
+                        printk(KERN_ERR PFX "two low fids - %d : 0x%x\n", j, pst[j].fid);
+                        return -EINVAL;
+                }
+                if (pst[j].fid < lastfid)
+                        lastfid = pst[j].fid;
+        }
+        if (lastfid & 1) {
+                printk(KERN_ERR PFX "lastfid invalid\n");
+                return -EINVAL;
+        }
+        if (lastfid > LO_FID_TABLE_TOP)
+                printk(KERN_INFO PFX  "first fid not from lo freq table\n");
+
+        return 0;
+}
+
+static void print_basics(struct powernow_k8_data *data)
+{
+        int j;
+        for (j = 0; j < data->numps; j++) {
+                if (data->powernow_table[j].frequency != CPUFREQ_ENTRY_INVALID)
+                        printk(KERN_INFO PFX "   %d : fid 0x%x (%d MHz), vid 0x%x (%d mV)\n", j,
+                                data->powernow_table[j].index & 0xff,
+                                data->powernow_table[j].frequency/1000,
+                                data->powernow_table[j].index >> 8,
+                                find_millivolts_from_vid(data, data->powernow_table[j].index >> 8));
+        }
+        if (data->batps)
+                printk(KERN_INFO PFX "Only %d pstates on battery\n", data->batps);
+}
+
+static int fill_powernow_table(struct powernow_k8_data *data, struct pst_s *pst, u8 maxvid)
+{
+        struct cpufreq_frequency_table *powernow_table;
+        unsigned int j;
+
+        if (data->batps) {    /* use ACPI support to get full speed on mains power */
+                printk(KERN_WARNING PFX "Only %d pstates usable (use ACPI driver for full range\n", data->batps);
+                data->numps = data->batps;
+        }
+
+        for ( j=1; j<data->numps; j++ ) {
+                if (pst[j-1].fid >= pst[j].fid) {
+                        printk(KERN_ERR PFX "PST out of sequence\n");
+                        return -EINVAL;
+                }
+        }
+
+        if (data->numps < 2) {
+                printk(KERN_ERR PFX "no p states to transition\n");
+                return -ENODEV;
+        }
+
+        if (check_pst_table(data, pst, maxvid))
+                return -EINVAL;
+
+        powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table)
+                * (data->numps + 1)), GFP_KERNEL);
+        if (!powernow_table) {
+                printk(KERN_ERR PFX "powernow_table memory alloc failure\n");
+                return -ENOMEM;
+        }
+
+        for (j = 0; j < data->numps; j++) {
+                powernow_table[j].index = pst[j].fid; /* lower 8 bits */
+                powernow_table[j].index |= (pst[j].vid << 8); /* upper 8 bits */
+                powernow_table[j].frequency = find_khz_freq_from_fid(pst[j].fid);
+        }
+        powernow_table[data->numps].frequency = CPUFREQ_TABLE_END;
+        powernow_table[data->numps].index = 0;
+
+        if (query_current_values_with_pending_wait(data)) {
+                kfree(powernow_table);
+                return -EIO;
+        }
+
+        dprintk("cfid 0x%x, cvid 0x%x\n", data->currfid, data->currvid);
+        data->powernow_table = powernow_table;
+        print_basics(data);
+
+        for (j = 0; j < data->numps; j++)
+                if ((pst[j].fid==data->currfid) && (pst[j].vid==data->currvid))
+                        return 0;
+
+        dprintk("currfid/vid do not match PST, ignoring\n");
+        return 0;
+}
+
+/* Find and validate the PSB/PST table in BIOS. */
+static int find_psb_table(struct powernow_k8_data *data)
+{
+        struct psb_s *psb;
+        unsigned int i;
+        u32 mvs;
+        u8 maxvid;
+        u32 cpst = 0;
+        u32 thiscpuid;
+
+        for (i = 0xc0000; i < 0xffff0; i += 0x10) {
+                /* Scan BIOS looking for the signature. */
+                /* It can not be at ffff0 - it is too big. */
+
+                psb = phys_to_virt(i);
+                if (memcmp(psb, PSB_ID_STRING, PSB_ID_STRING_LEN) != 0)
+                        continue;
+
+                dprintk("found PSB header at 0x%p\n", psb);
+
+                dprintk("table vers: 0x%x\n", psb->tableversion);
+                if (psb->tableversion != PSB_VERSION_1_4) {
+                        printk(KERN_INFO BFX "PSB table is not v1.4\n");
+                        return -ENODEV;
+                }
+
+                dprintk("flags: 0x%x\n", psb->flags1);
+                if (psb->flags1) {
+                        printk(KERN_ERR BFX "unknown flags\n");
+                        return -ENODEV;
+                }
+
+                data->vstable = psb->vstable;
+                dprintk("voltage stabilization time: %d(*20us)\n", data->vstable);
+
+                dprintk("flags2: 0x%x\n", psb->flags2);
+                data->rvo = psb->flags2 & 3;
+                data->irt = ((psb->flags2) >> 2) & 3;
+                mvs = ((psb->flags2) >> 4) & 3;
+                data->vidmvs = 1 << mvs;
+                data->batps = ((psb->flags2) >> 6) & 3;
+
+                dprintk("ramp voltage offset: %d\n", data->rvo);
+                dprintk("isochronous relief time: %d\n", data->irt);
+                dprintk("maximum voltage step: %d - 0x%x\n", mvs, data->vidmvs);
+
+                dprintk("numpst: 0x%x\n", psb->num_tables);
+                cpst = psb->num_tables;
+                if ((psb->cpuid == 0x00000fc0) || (psb->cpuid == 0x00000fe0) ){
+                        thiscpuid = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
+                        if ((thiscpuid == 0x00000fc0) || (thiscpuid == 0x00000fe0) ) {
+                                cpst = 1;
+                        }
+                }
+                if (cpst != 1) {
+                        printk(KERN_ERR BFX "numpst must be 1\n");
+                        return -ENODEV;
+                }
+
+                data->plllock = psb->plllocktime;
+                dprintk("plllocktime: 0x%x (units 1us)\n", psb->plllocktime);
+                dprintk("maxfid: 0x%x\n", psb->maxfid);
+                dprintk("maxvid: 0x%x\n", psb->maxvid);
+                maxvid = psb->maxvid;
+
+                data->numps = psb->numps;
+                dprintk("numpstates: 0x%x\n", data->numps);
+                return fill_powernow_table(data, (struct pst_s *)(psb+1), maxvid);
+        }
+        /*
+         * If you see this message, complain to BIOS manufacturer. If
+         * he tells you "we do not support Linux" or some similar
+         * nonsense, remember that Windows 2000 uses the same legacy
+         * mechanism that the old Linux PSB driver uses. Tell them it
+         * is broken with Windows 2000.
+         *
+         * The reference to the AMD documentation is chapter 9 in the
+         * BIOS and Kernel Developer's Guide, which is available on
+         * www.amd.com
+         */
+        printk(KERN_ERR PFX "BIOS error - no PSB\n");
+        return -ENODEV;
+}
+
+#ifdef CONFIG_X86_POWERNOW_K8_ACPI
+static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index)
+{
+        if (!data->acpi_data.state_count)
+                return;
+
+        data->irt = (data->acpi_data.states[index].control >> IRT_SHIFT) & IRT_MASK;
+        data->rvo = (data->acpi_data.states[index].control >> RVO_SHIFT) & RVO_MASK;
+        data->plllock = (data->acpi_data.states[index].control >> PLL_L_SHIFT) & PLL_L_MASK;
+        data->vidmvs = 1 << ((data->acpi_data.states[index].control >> MVS_SHIFT) & MVS_MASK);
+        data->vstable = (data->acpi_data.states[index].control >> VST_SHIFT) & VST_MASK;
+}
+
+static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
+{
+        int i;
+        int cntlofreq = 0;
+        struct cpufreq_frequency_table *powernow_table;
+
+        if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) {
+                dprintk("register performance failed\n");
+                return -EIO;
+        }
+
+        /* verify the data contained in the ACPI structures */
+        if (data->acpi_data.state_count <= 1) {
+                dprintk("No ACPI P-States\n");
+                goto err_out;
+        }
+
+        if ((data->acpi_data.control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
+                (data->acpi_data.status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
+                dprintk("Invalid control/status registers (%x - %x)\n",
+                        data->acpi_data.control_register.space_id,
+                        data->acpi_data.status_register.space_id);
+                goto err_out;
+        }
+
+        /* fill in data->powernow_table */
+        powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table)
+                * (data->acpi_data.state_count + 1)), GFP_KERNEL);
+        if (!powernow_table) {
+                dprintk("powernow_table memory alloc failure\n");
+                goto err_out;
+        }
+
+        for (i = 0; i < data->acpi_data.state_count; i++) {
+                u32 fid = data->acpi_data.states[i].control & FID_MASK;
+                u32 vid = (data->acpi_data.states[i].control >> VID_SHIFT) & VID_MASK;
+
+                dprintk("   %d : fid 0x%x, vid 0x%x\n", i, fid, vid);
+
+                powernow_table[i].index = fid; /* lower 8 bits */
+                powernow_table[i].index |= (vid << 8); /* upper 8 bits */
+                powernow_table[i].frequency = find_khz_freq_from_fid(fid);
+
+                /* verify frequency is OK */
+                if ((powernow_table[i].frequency > (MAX_FREQ * 1000)) ||
+                        (powernow_table[i].frequency < (MIN_FREQ * 1000))) {
+                        dprintk("invalid freq %u kHz, ignoring\n", powernow_table[i].frequency);
+                        powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+                        continue;
+                }
+
+                /* verify voltage is OK - BIOSs are using "off" to indicate invalid */
+                if (vid == 0x1f) {
+                        dprintk("invalid vid %u, ignoring\n", vid);
+                        powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+                        continue;
+                }
+
+                if (fid < HI_FID_TABLE_BOTTOM) {
+                        if (cntlofreq) {
+                                /* if both entries are the same, ignore this
+                                 * one... 
+                                 */
+                                if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) ||
+                                    (powernow_table[i].index != powernow_table[cntlofreq].index)) {
+                                        printk(KERN_ERR PFX "Too many lo freq table entries\n");
+                                        goto err_out_mem;
+                                }
+                                
+                                dprintk("double low frequency table entry, ignoring it.\n");
+                                powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+                                continue;
+                        } else
+                                cntlofreq = i;
+                }
+
+                if (powernow_table[i].frequency != (data->acpi_data.states[i].core_frequency * 1000)) {
+                        printk(KERN_INFO PFX "invalid freq entries %u kHz vs. %u kHz\n",
+                                powernow_table[i].frequency,
+                                (unsigned int) (data->acpi_data.states[i].core_frequency * 1000));
+                        powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+                        continue;
+                }
+        }
+
+        powernow_table[data->acpi_data.state_count].frequency = CPUFREQ_TABLE_END;
+        powernow_table[data->acpi_data.state_count].index = 0;
+        data->powernow_table = powernow_table;
+
+        /* fill in data */
+        data->numps = data->acpi_data.state_count;
+        print_basics(data);
+        powernow_k8_acpi_pst_values(data, 0);
+
+        /* notify BIOS that we exist */
+        acpi_processor_notify_smm(THIS_MODULE);
+
+        return 0;
+
+err_out_mem:
+        kfree(powernow_table);
+
+err_out:
+        acpi_processor_unregister_performance(&data->acpi_data, data->cpu);
+
+        /* data->acpi_data.state_count informs us at ->exit() whether ACPI was used */
+        data->acpi_data.state_count = 0;
+
+        return -ENODEV;
+}
+
+static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data)
+{
+        if (data->acpi_data.state_count)
+                acpi_processor_unregister_performance(&data->acpi_data, data->cpu);
+}
+
+#else
+static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) { return -ENODEV; }
+static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data) { return; }
+static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index) { return; }
+#endif /* CONFIG_X86_POWERNOW_K8_ACPI */
+
+/* Take a frequency, and issue the fid/vid transition command */
+static int transition_frequency(struct powernow_k8_data *data, unsigned int index)
+{
+        u32 fid;
+        u32 vid;
+        int res;
+        struct cpufreq_freqs freqs;
+
+        dprintk("cpu %d transition to index %u\n", smp_processor_id(), index);
+
+        /* fid are the lower 8 bits of the index we stored into
+         * the cpufreq frequency table in find_psb_table, vid are 
+         * the upper 8 bits.
+         */
+
+        fid = data->powernow_table[index].index & 0xFF;
+        vid = (data->powernow_table[index].index & 0xFF00) >> 8;
+
+        dprintk("table matched fid 0x%x, giving vid 0x%x\n", fid, vid);
+
+        if (query_current_values_with_pending_wait(data))
+                return 1;
+
+        if ((data->currvid == vid) && (data->currfid == fid)) {
+                dprintk("target matches current values (fid 0x%x, vid 0x%x)\n",
+                        fid, vid);
+                return 0;
+        }
+
+        if ((fid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) {
+                printk("ignoring illegal change in lo freq table-%x to 0x%x\n",
+                       data->currfid, fid);
+                return 1;
+        }
+
+        dprintk("cpu %d, changing to fid 0x%x, vid 0x%x\n",
+                smp_processor_id(), fid, vid);
+
+        freqs.cpu = data->cpu;
+
+        freqs.old = find_khz_freq_from_fid(data->currfid);
+        freqs.new = find_khz_freq_from_fid(fid);
+        cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+        down(&fidvid_sem);
+        res = transition_fid_vid(data, fid, vid);
+        up(&fidvid_sem);
+
+        freqs.new = find_khz_freq_from_fid(data->currfid);
+        cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+        return res;
+}
+
+/* Driver entry point to switch to the target frequency */
+static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsigned relation)
+{
+        cpumask_t oldmask = CPU_MASK_ALL;
+        struct powernow_k8_data *data = powernow_data[pol->cpu];
+        u32 checkfid = data->currfid;
+        u32 checkvid = data->currvid;
+        unsigned int newstate;
+        int ret = -EIO;
+
+        /* only run on specific CPU from here on */
+        oldmask = current->cpus_allowed;
+        set_cpus_allowed(current, cpumask_of_cpu(pol->cpu));
+        schedule();
+
+        if (smp_processor_id() != pol->cpu) {
+                printk(KERN_ERR "limiting to cpu %u failed\n", pol->cpu);
+                goto err_out;
+        }
+
+        if (pending_bit_stuck()) {
+                printk(KERN_ERR PFX "failing targ, change pending bit set\n");
+                goto err_out;
+        }
+
+        dprintk("targ: cpu %d, %d kHz, min %d, max %d, relation %d\n",
+                pol->cpu, targfreq, pol->min, pol->max, relation);
+
+        if (query_current_values_with_pending_wait(data)) {
+                ret = -EIO;
+                goto err_out;
+        }
+
+        dprintk("targ: curr fid 0x%x, vid 0x%x\n",
+                data->currfid, data->currvid);
+
+        if ((checkvid != data->currvid) || (checkfid != data->currfid)) {
+                printk(KERN_ERR PFX
+                       "error - out of sync, fid 0x%x 0x%x, vid 0x%x 0x%x\n",
+                       checkfid, data->currfid, checkvid, data->currvid);
+        }
+
+        if (cpufreq_frequency_table_target(pol, data->powernow_table, targfreq, relation, &newstate))
+                goto err_out;
+
+        powernow_k8_acpi_pst_values(data, newstate);
+
+        if (transition_frequency(data, newstate)) {
+                printk(KERN_ERR PFX "transition frequency failed\n");
+                ret = 1;
+                goto err_out;
+        }
+
+        pol->cur = find_khz_freq_from_fid(data->currfid);
+        ret = 0;
+
+err_out:
+        set_cpus_allowed(current, oldmask);
+        schedule();
+
+        return ret;
+}
+
+/* Driver entry point to verify the policy and range of frequencies */
+static int powernowk8_verify(struct cpufreq_policy *pol)
+{
+        struct powernow_k8_data *data = powernow_data[pol->cpu];
+
+        return cpufreq_frequency_table_verify(pol, data->powernow_table);
+}
+
+/* per CPU init entry point to the driver */
+static int __init powernowk8_cpu_init(struct cpufreq_policy *pol)
+{
+        struct powernow_k8_data *data;
+        cpumask_t oldmask = CPU_MASK_ALL;
+        int rc;
+
+        if (!check_supported_cpu(pol->cpu))
+                return -ENODEV;
+
+        data = kmalloc(sizeof(struct powernow_k8_data), GFP_KERNEL);
+        if (!data) {
+                printk(KERN_ERR PFX "unable to alloc powernow_k8_data");
+                return -ENOMEM;
+        }
+        memset(data,0,sizeof(struct powernow_k8_data));
+
+        data->cpu = pol->cpu;
+
+        if (powernow_k8_cpu_init_acpi(data)) {
+                /*
+                 * Use the PSB BIOS structure. This is only availabe on
+                 * an UP version, and is deprecated by AMD.
+                 */
+
+                if ((num_online_cpus() != 1) || (num_possible_cpus() != 1)) {
+                        printk(KERN_INFO PFX "MP systems not supported by PSB BIOS structure\n");
+                        kfree(data);
+                        return -ENODEV;
+                }
+                if (pol->cpu != 0) {
+                        printk(KERN_ERR PFX "init not cpu 0\n");
+                        kfree(data);
+                        return -ENODEV;
+                }
+                rc = find_psb_table(data);
+                if (rc) {
+                        kfree(data);
+                        return -ENODEV;
+                }
+        }
+
+        /* only run on specific CPU from here on */
+        oldmask = current->cpus_allowed;
+        set_cpus_allowed(current, cpumask_of_cpu(pol->cpu));
+        schedule();
+
+        if (smp_processor_id() != pol->cpu) {
+                printk(KERN_ERR "limiting to cpu %u failed\n", pol->cpu);
+                goto err_out;
+        }
+
+        if (pending_bit_stuck()) {
+                printk(KERN_ERR PFX "failing init, change pending bit set\n");
+                goto err_out;
+        }
+
+        if (query_current_values_with_pending_wait(data))
+                goto err_out;
+
+        fidvid_msr_init();
+
+        /* run on any CPU again */
+        set_cpus_allowed(current, oldmask);
+        schedule();
+
+        pol->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+        /* Take a crude guess here. 
+         * That guess was in microseconds, so multiply with 1000 */
+        pol->cpuinfo.transition_latency = (((data->rvo + 8) * data->vstable * VST_UNITS_20US)
+            + (3 * (1 << data->irt) * 10)) * 1000;
+
+        pol->cur = find_khz_freq_from_fid(data->currfid);
+        dprintk("policy current frequency %d kHz\n", pol->cur);
+
+        /* min/max the cpu is capable of */
+        if (cpufreq_frequency_table_cpuinfo(pol, data->powernow_table)) {
+                printk(KERN_ERR PFX "invalid powernow_table\n");
+                powernow_k8_cpu_exit_acpi(data);
+                kfree(data->powernow_table);
+                kfree(data);
+                return -EINVAL;
+        }
+
+        cpufreq_frequency_table_get_attr(data->powernow_table, pol->cpu);
+
+        printk("cpu_init done, current fid 0x%x, vid 0x%x\n",
+               data->currfid, data->currvid);
+
+        powernow_data[pol->cpu] = data;
+
+        return 0;
+
+err_out:
+        set_cpus_allowed(current, oldmask);
+        schedule();
+        powernow_k8_cpu_exit_acpi(data);
+
+        kfree(data);
+        return -ENODEV;
+}
+
+static int __devexit powernowk8_cpu_exit (struct cpufreq_policy *pol)
+{
+        struct powernow_k8_data *data = powernow_data[pol->cpu];
+
+        if (!data)
+                return -EINVAL;
+
+        powernow_k8_cpu_exit_acpi(data);
+
+        cpufreq_frequency_table_put_attr(pol->cpu);
+
+        kfree(data->powernow_table);
+        kfree(data);
+
+        return 0;
+}
+
+static unsigned int powernowk8_get (unsigned int cpu)
+{
+        struct powernow_k8_data *data = powernow_data[cpu];
+        cpumask_t oldmask = current->cpus_allowed;
+        unsigned int khz = 0;
+
+        set_cpus_allowed(current, cpumask_of_cpu(cpu));
+        if (smp_processor_id() != cpu) {
+                printk(KERN_ERR PFX "limiting to CPU %d failed in powernowk8_get\n", cpu);
+                set_cpus_allowed(current, oldmask);
+                return 0;
+        }
+        preempt_disable();
+
+        if (query_current_values_with_pending_wait(data))
+                goto out;
+
+        khz = find_khz_freq_from_fid(data->currfid);
+
+ out:
+        preempt_enable_no_resched();
+        set_cpus_allowed(current, oldmask);
+
+        return khz;
+}
+
+static struct freq_attr* powernow_k8_attr[] = {
+        &cpufreq_freq_attr_scaling_available_freqs,
+        NULL,
+};
+
+static struct cpufreq_driver cpufreq_amd64_driver = {
+        .verify = powernowk8_verify,
+        .target = powernowk8_target,
+        .init = powernowk8_cpu_init,
+        .exit = __devexit_p(powernowk8_cpu_exit),
+        .get = powernowk8_get,
+        .name = "powernow-k8",
+        .owner = THIS_MODULE,
+        .attr = powernow_k8_attr,
+};
+
+/* driver entry point for init */
+static int __init powernowk8_init(void)
+{
+        unsigned int i, supported_cpus = 0;
+
+        for (i=0; i<NR_CPUS; i++) {
+                if (!cpu_online(i))
+                        continue;
+                if (check_supported_cpu(i))
+                        supported_cpus++;
+        }
+
+        if (supported_cpus == num_online_cpus()) {
+                printk(KERN_INFO PFX "Found %d AMD Athlon 64 / Opteron processors (" VERSION ")\n",
+                        supported_cpus);
+                return cpufreq_register_driver(&cpufreq_amd64_driver);
+        }
+
+        return -ENODEV;
+}
+
+/* driver entry point for term */
+static void __exit powernowk8_exit(void)
+{
+        dprintk("exit\n");
+
+        cpufreq_unregister_driver(&cpufreq_amd64_driver);
+}
+
+MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com>");
+MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver.");
+MODULE_LICENSE("GPL");
+
+late_initcall(powernowk8_init);
+module_exit(powernowk8_exit);
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
new file mode 100644
index 000000000000..63ebc8470f52
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
@@ -0,0 +1,176 @@
+/*
+ *  (c) 2003, 2004 Advanced Micro Devices, Inc.
+ *  Your use of this code is subject to the terms and conditions of the
+ *  GNU general public license version 2. See "COPYING" or
+ *  http://www.gnu.org/licenses/gpl.html
+ */
+
+struct powernow_k8_data {
+        unsigned int cpu;
+
+        u32 numps;  /* number of p-states */
+        u32 batps;  /* number of p-states supported on battery */
+
+        /* these values are constant when the PSB is used to determine
+         * vid/fid pairings, but are modified during the ->target() call
+         * when ACPI is used */
+        u32 rvo;     /* ramp voltage offset */
+        u32 irt;     /* isochronous relief time */
+        u32 vidmvs;  /* usable value calculated from mvs */
+        u32 vstable; /* voltage stabilization time, units 20 us */
+        u32 plllock; /* pll lock time, units 1 us */
+
+        /* keep track of the current fid / vid */
+        u32 currvid, currfid;
+
+        /* the powernow_table includes all frequency and vid/fid pairings:
+         * fid are the lower 8 bits of the index, vid are the upper 8 bits.
+         * frequency is in kHz */
+        struct cpufreq_frequency_table  *powernow_table;
+
+#ifdef CONFIG_X86_POWERNOW_K8_ACPI
+        /* the acpi table needs to be kept. it's only available if ACPI was
+         * used to determine valid frequency/vid/fid states */
+        struct acpi_processor_performance acpi_data;
+#endif
+};
+
+
+/* processor's cpuid instruction support */
+#define CPUID_PROCESSOR_SIGNATURE       1       /* function 1 */
+#define CPUID_XFAM                      0x0ff00000      /* extended family */
+#define CPUID_XFAM_K8                   0
+#define CPUID_XMOD                      0x000f0000      /* extended model */
+#define CPUID_XMOD_REV_E                0x00020000
+#define CPUID_USE_XFAM_XMOD             0x00000f00
+#define CPUID_GET_MAX_CAPABILITIES      0x80000000
+#define CPUID_FREQ_VOLT_CAPABILITIES    0x80000007
+#define P_STATE_TRANSITION_CAPABLE      6
+
+/* Model Specific Registers for p-state transitions. MSRs are 64-bit. For     */
+/* writes (wrmsr - opcode 0f 30), the register number is placed in ecx, and   */
+/* the value to write is placed in edx:eax. For reads (rdmsr - opcode 0f 32), */
+/* the register number is placed in ecx, and the data is returned in edx:eax. */
+
+#define MSR_FIDVID_CTL      0xc0010041
+#define MSR_FIDVID_STATUS   0xc0010042
+
+/* Field definitions within the FID VID Low Control MSR : */
+#define MSR_C_LO_INIT_FID_VID     0x00010000
+#define MSR_C_LO_NEW_VID          0x00001f00
+#define MSR_C_LO_NEW_FID          0x0000002f
+#define MSR_C_LO_VID_SHIFT        8
+
+/* Field definitions within the FID VID High Control MSR : */
+#define MSR_C_HI_STP_GNT_TO       0x000fffff
+
+/* Field definitions within the FID VID Low Status MSR : */
+#define MSR_S_LO_CHANGE_PENDING   0x80000000    /* cleared when completed */
+#define MSR_S_LO_MAX_RAMP_VID     0x1f000000
+#define MSR_S_LO_MAX_FID          0x003f0000
+#define MSR_S_LO_START_FID        0x00003f00
+#define MSR_S_LO_CURRENT_FID      0x0000003f
+
+/* Field definitions within the FID VID High Status MSR : */
+#define MSR_S_HI_MAX_WORKING_VID  0x001f0000
+#define MSR_S_HI_START_VID        0x00001f00
+#define MSR_S_HI_CURRENT_VID      0x0000001f
+#define MSR_C_HI_STP_GNT_BENIGN   0x00000001
+
+/*
+ * There are restrictions frequencies have to follow:
+ * - only 1 entry in the low fid table ( <=1.4GHz )
+ * - lowest entry in the high fid table must be >= 2 * the entry in the
+ *   low fid table
+ * - lowest entry in the high fid table must be a <= 200MHz + 2 * the entry
+ *   in the low fid table
+ * - the parts can only step at 200 MHz intervals, so 1.9 GHz is never valid
+ * - lowest frequency must be >= interprocessor hypertransport link speed
+ *   (only applies to MP systems obviously)
+ */
+
+/* fids (frequency identifiers) are arranged in 2 tables - lo and hi */
+#define LO_FID_TABLE_TOP     6  /* fid values marking the boundary    */
+#define HI_FID_TABLE_BOTTOM  8  /* between the low and high tables    */
+
+#define LO_VCOFREQ_TABLE_TOP    1400    /* corresponding vco frequency values */
+#define HI_VCOFREQ_TABLE_BOTTOM 1600
+
+#define MIN_FREQ_RESOLUTION  200 /* fids jump by 2 matching freq jumps by 200 */
+
+#define MAX_FID 0x2a    /* Spec only gives FID values as far as 5 GHz */
+#define LEAST_VID 0x1e  /* Lowest (numerically highest) useful vid value */
+
+#define MIN_FREQ 800    /* Min and max freqs, per spec */
+#define MAX_FREQ 5000
+
+#define INVALID_FID_MASK 0xffffffc1  /* not a valid fid if these bits are set */
+#define INVALID_VID_MASK 0xffffffe0  /* not a valid vid if these bits are set */
+
+#define STOP_GRANT_5NS 1 /* min poss memory access latency for voltage change */
+
+#define PLL_LOCK_CONVERSION (1000/5) /* ms to ns, then divide by clock period */
+
+#define MAXIMUM_VID_STEPS 1  /* Current cpus only allow a single step of 25mV */
+#define VST_UNITS_20US 20   /* Voltage Stabalization Time is in units of 20us */
+
+/*
+ * Most values of interest are enocoded in a single field of the _PSS
+ * entries: the "control" value.
+ */
+                                                                                                    
+#define IRT_SHIFT      30
+#define RVO_SHIFT      28
+#define PLL_L_SHIFT    20
+#define MVS_SHIFT      18
+#define VST_SHIFT      11
+#define VID_SHIFT       6
+#define IRT_MASK        3
+#define RVO_MASK        3
+#define PLL_L_MASK   0x7f
+#define MVS_MASK        3
+#define VST_MASK     0x7f
+#define VID_MASK     0x1f
+#define FID_MASK     0x3f
+
+
+/*
+ * Version 1.4 of the PSB table. This table is constructed by BIOS and is
+ * to tell the OS's power management driver which VIDs and FIDs are
+ * supported by this particular processor.
+ * If the data in the PSB / PST is wrong, then this driver will program the
+ * wrong values into hardware, which is very likely to lead to a crash.
+ */
+
+#define PSB_ID_STRING      "AMDK7PNOW!"
+#define PSB_ID_STRING_LEN  10
+
+#define PSB_VERSION_1_4  0x14
+
+struct psb_s {
+        u8 signature[10];
+        u8 tableversion;
+        u8 flags1;
+        u16 vstable;
+        u8 flags2;
+        u8 num_tables;
+        u32 cpuid;
+        u8 plllocktime;
+        u8 maxfid;
+        u8 maxvid;
+        u8 numps;
+};
+
+/* Pairs of fid/vid values are appended to the version 1.4 PSB table. */
+struct pst_s {
+        u8 fid;
+        u8 vid;
+};
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k8", msg)
+
+static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid);
+static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid);
+static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid);
+
+static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index);
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
new file mode 100644
index 000000000000..07d5612dc00f
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -0,0 +1,715 @@
+/*
+ * cpufreq driver for Enhanced SpeedStep, as found in Intel's Pentium
+ * M (part of the Centrino chipset).
+ *
+ * Despite the "SpeedStep" in the name, this is almost entirely unlike
+ * traditional SpeedStep.
+ *
+ * Modelled on speedstep.c
+ *
+ * Copyright (C) 2003 Jeremy Fitzhardinge <jeremy@goop.org>
+ *
+ * WARNING WARNING WARNING
+ *
+ * This driver manipulates the PERF_CTL MSR, which is only somewhat
+ * documented.  While it seems to work on my laptop, it has not been
+ * tested anywhere else, and it may not work for you, do strange
+ * things or simply crash.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/config.h>
+#include <linux/delay.h>
+#include <linux/compiler.h>
+
+#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI
+#include <linux/acpi.h>
+#include <acpi/processor.h>
+#endif
+
+#include <asm/msr.h>
+#include <asm/processor.h>
+#include <asm/cpufeature.h>
+
+#include "speedstep-est-common.h"
+
+#define PFX             "speedstep-centrino: "
+#define MAINTAINER      "Jeremy Fitzhardinge <jeremy@goop.org>"
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg)
+
+
+struct cpu_id
+{
+        __u8    x86;            /* CPU family */
+        __u8    x86_model;      /* model */
+        __u8    x86_mask;       /* stepping */
+};
+
+enum {
+        CPU_BANIAS,
+        CPU_DOTHAN_A1,
+        CPU_DOTHAN_A2,
+        CPU_DOTHAN_B0,
+};
+
+static const struct cpu_id cpu_ids[] = {
+        [CPU_BANIAS]    = { 6,  9, 5 },
+        [CPU_DOTHAN_A1] = { 6, 13, 1 },
+        [CPU_DOTHAN_A2] = { 6, 13, 2 },
+        [CPU_DOTHAN_B0] = { 6, 13, 6 },
+};
+#define N_IDS   (sizeof(cpu_ids)/sizeof(cpu_ids[0]))
+
+struct cpu_model
+{
+        const struct cpu_id *cpu_id;
+        const char      *model_name;
+        unsigned        max_freq; /* max clock in kHz */
+
+        struct cpufreq_frequency_table *op_points; /* clock/voltage pairs */
+};
+static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, const struct cpu_id *x);
+
+/* Operating points for current CPU */
+static struct cpu_model *centrino_model[NR_CPUS];
+static const struct cpu_id *centrino_cpu[NR_CPUS];
+
+static struct cpufreq_driver centrino_driver;
+
+#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE
+
+/* Computes the correct form for IA32_PERF_CTL MSR for a particular
+   frequency/voltage operating point; frequency in MHz, volts in mV.
+   This is stored as "index" in the structure. */
+#define OP(mhz, mv)                                                     \
+        {                                                               \
+                .frequency = (mhz) * 1000,                              \
+                .index = (((mhz)/100) << 8) | ((mv - 700) / 16)         \
+        }
+
+/*
+ * These voltage tables were derived from the Intel Pentium M
+ * datasheet, document 25261202.pdf, Table 5.  I have verified they
+ * are consistent with my IBM ThinkPad X31, which has a 1.3GHz Pentium
+ * M.
+ */
+
+/* Ultra Low Voltage Intel Pentium M processor 900MHz (Banias) */
+static struct cpufreq_frequency_table banias_900[] =
+{
+        OP(600,  844),
+        OP(800,  988),
+        OP(900, 1004),
+        { .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Ultra Low Voltage Intel Pentium M processor 1000MHz (Banias) */
+static struct cpufreq_frequency_table banias_1000[] =
+{
+        OP(600,   844),
+        OP(800,   972),
+        OP(900,   988),
+        OP(1000, 1004),
+        { .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Low Voltage Intel Pentium M processor 1.10GHz (Banias) */
+static struct cpufreq_frequency_table banias_1100[] =
+{
+        OP( 600,  956),
+        OP( 800, 1020),
+        OP( 900, 1100),
+        OP(1000, 1164),
+        OP(1100, 1180),
+        { .frequency = CPUFREQ_TABLE_END }
+};
+
+
+/* Low Voltage Intel Pentium M processor 1.20GHz (Banias) */
+static struct cpufreq_frequency_table banias_1200[] =
+{
+        OP( 600,  956),
+        OP( 800, 1004),
+        OP( 900, 1020),
+        OP(1000, 1100),
+        OP(1100, 1164),
+        OP(1200, 1180),
+        { .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Intel Pentium M processor 1.30GHz (Banias) */
+static struct cpufreq_frequency_table banias_1300[] =
+{
+        OP( 600,  956),
+        OP( 800, 1260),
+        OP(1000, 1292),
+        OP(1200, 1356),
+        OP(1300, 1388),
+        { .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Intel Pentium M processor 1.40GHz (Banias) */
+static struct cpufreq_frequency_table banias_1400[] =
+{
+        OP( 600,  956),
+        OP( 800, 1180),
+        OP(1000, 1308),
+        OP(1200, 1436),
+        OP(1400, 1484),
+        { .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Intel Pentium M processor 1.50GHz (Banias) */
+static struct cpufreq_frequency_table banias_1500[] =
+{
+        OP( 600,  956),
+        OP( 800, 1116),
+        OP(1000, 1228),
+        OP(1200, 1356),
+        OP(1400, 1452),
+        OP(1500, 1484),
+        { .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Intel Pentium M processor 1.60GHz (Banias) */
+static struct cpufreq_frequency_table banias_1600[] =
+{
+        OP( 600,  956),
+        OP( 800, 1036),
+        OP(1000, 1164),
+        OP(1200, 1276),
+        OP(1400, 1420),
+        OP(1600, 1484),
+        { .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Intel Pentium M processor 1.70GHz (Banias) */
+static struct cpufreq_frequency_table banias_1700[] =
+{
+        OP( 600,  956),
+        OP( 800, 1004),
+        OP(1000, 1116),
+        OP(1200, 1228),
+        OP(1400, 1308),
+        OP(1700, 1484),
+        { .frequency = CPUFREQ_TABLE_END }
+};
+#undef OP
+
+#define _BANIAS(cpuid, max, name)       \
+{       .cpu_id         = cpuid,        \
+        .model_name     = "Intel(R) Pentium(R) M processor " name "MHz", \
+        .max_freq       = (max)*1000,   \
+        .op_points      = banias_##max, \
+}
+#define BANIAS(max)     _BANIAS(&cpu_ids[CPU_BANIAS], max, #max)
+
+/* CPU models, their operating frequency range, and freq/voltage
+   operating points */
+static struct cpu_model models[] =
+{
+        _BANIAS(&cpu_ids[CPU_BANIAS], 900, " 900"),
+        BANIAS(1000),
+        BANIAS(1100),
+        BANIAS(1200),
+        BANIAS(1300),
+        BANIAS(1400),
+        BANIAS(1500),
+        BANIAS(1600),
+        BANIAS(1700),
+
+        /* NULL model_name is a wildcard */
+        { &cpu_ids[CPU_DOTHAN_A1], NULL, 0, NULL },
+        { &cpu_ids[CPU_DOTHAN_A2], NULL, 0, NULL },
+        { &cpu_ids[CPU_DOTHAN_B0], NULL, 0, NULL },
+
+        { NULL, }
+};
+#undef _BANIAS
+#undef BANIAS
+
+static int centrino_cpu_init_table(struct cpufreq_policy *policy)
+{
+        struct cpuinfo_x86 *cpu = &cpu_data[policy->cpu];
+        struct cpu_model *model;
+
+        for(model = models; model->cpu_id != NULL; model++)
+                if (centrino_verify_cpu_id(cpu, model->cpu_id) &&
+                    (model->model_name == NULL ||
+                     strcmp(cpu->x86_model_id, model->model_name) == 0))
+                        break;
+
+        if (model->cpu_id == NULL) {
+                /* No match at all */
+                dprintk(KERN_INFO PFX "no support for CPU model \"%s\": "
+                       "send /proc/cpuinfo to " MAINTAINER "\n",
+                       cpu->x86_model_id);
+                return -ENOENT;
+        }
+
+        if (model->op_points == NULL) {
+                /* Matched a non-match */
+                dprintk(KERN_INFO PFX "no table support for CPU model \"%s\": \n",
+                       cpu->x86_model_id);
+#ifndef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI
+                dprintk(KERN_INFO PFX "try compiling with CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI enabled\n");
+#endif
+                return -ENOENT;
+        }
+
+        centrino_model[policy->cpu] = model;
+
+        dprintk("found \"%s\": max frequency: %dkHz\n",
+               model->model_name, model->max_freq);
+
+        return 0;
+}
+
+#else
+static inline int centrino_cpu_init_table(struct cpufreq_policy *policy) { return -ENODEV; }
+#endif /* CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE */
+
+static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, const struct cpu_id *x)
+{
+        if ((c->x86 == x->x86) &&
+            (c->x86_model == x->x86_model) &&
+            (c->x86_mask == x->x86_mask))
+                return 1;
+        return 0;
+}
+
+/* To be called only after centrino_model is initialized */
+static unsigned extract_clock(unsigned msr, unsigned int cpu, int failsafe)
+{
+        int i;
+
+        /*
+         * Extract clock in kHz from PERF_CTL value
+         * for centrino, as some DSDTs are buggy.
+         * Ideally, this can be done using the acpi_data structure.
+         */
+        if ((centrino_cpu[cpu] == &cpu_ids[CPU_BANIAS]) ||
+            (centrino_cpu[cpu] == &cpu_ids[CPU_DOTHAN_A1]) ||
+            (centrino_cpu[cpu] == &cpu_ids[CPU_DOTHAN_B0])) {
+                msr = (msr >> 8) & 0xff;
+                return msr * 100000;
+        }
+
+        if ((!centrino_model[cpu]) || (!centrino_model[cpu]->op_points))
+                return 0;
+
+        msr &= 0xffff;
+        for (i=0;centrino_model[cpu]->op_points[i].frequency != CPUFREQ_TABLE_END; i++) {
+                if (msr == centrino_model[cpu]->op_points[i].index)
+                        return centrino_model[cpu]->op_points[i].frequency;
+        }
+        if (failsafe)
+                return centrino_model[cpu]->op_points[i-1].frequency;
+        else
+                return 0;
+}
+
+/* Return the current CPU frequency in kHz */
+static unsigned int get_cur_freq(unsigned int cpu)
+{
+        unsigned l, h;
+        unsigned clock_freq;
+        cpumask_t saved_mask;
+
+        saved_mask = current->cpus_allowed;
+        set_cpus_allowed(current, cpumask_of_cpu(cpu));
+        if (smp_processor_id() != cpu)
+                return 0;
+
+        rdmsr(MSR_IA32_PERF_STATUS, l, h);
+        clock_freq = extract_clock(l, cpu, 0);
+
+        if (unlikely(clock_freq == 0)) {
+                /*
+                 * On some CPUs, we can see transient MSR values (which are
+                 * not present in _PSS), while CPU is doing some automatic
+                 * P-state transition (like TM2). Get the last freq set 
+                 * in PERF_CTL.
+                 */
+                rdmsr(MSR_IA32_PERF_CTL, l, h);
+                clock_freq = extract_clock(l, cpu, 1);
+        }
+
+        set_cpus_allowed(current, saved_mask);
+        return clock_freq;
+}
+
+
+#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI
+
+static struct acpi_processor_performance p;
+
+/*
+ * centrino_cpu_init_acpi - register with ACPI P-States library
+ *
+ * Register with the ACPI P-States library (part of drivers/acpi/processor.c)
+ * in order to determine correct frequency and voltage pairings by reading
+ * the _PSS of the ACPI DSDT or SSDT tables.
+ */
+static int centrino_cpu_init_acpi(struct cpufreq_policy *policy)
+{
+        union acpi_object               arg0 = {ACPI_TYPE_BUFFER};
+        u32                             arg0_buf[3];
+        struct acpi_object_list         arg_list = {1, &arg0};
+        unsigned long                   cur_freq;
+        int                             result = 0, i;
+        unsigned int                    cpu = policy->cpu;
+
+        /* _PDC settings */
+        arg0.buffer.length = 12;
+        arg0.buffer.pointer = (u8 *) arg0_buf;
+        arg0_buf[0] = ACPI_PDC_REVISION_ID;
+        arg0_buf[1] = 1;
+        arg0_buf[2] = ACPI_PDC_EST_CAPABILITY_SMP | ACPI_PDC_EST_CAPABILITY_MSR;
+
+        p.pdc = &arg_list;
+
+        /* register with ACPI core */
+        if (acpi_processor_register_performance(&p, cpu)) {
+                dprintk(KERN_INFO PFX "obtaining ACPI data failed\n");
+                return -EIO;
+        }
+
+        /* verify the acpi_data */
+        if (p.state_count <= 1) {
+                dprintk("No P-States\n");
+                result = -ENODEV;
+                goto err_unreg;
+        }
+
+        if ((p.control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
+            (p.status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
+                dprintk("Invalid control/status registers (%x - %x)\n",
+                        p.control_register.space_id, p.status_register.space_id);
+                result = -EIO;
+                goto err_unreg;
+        }
+
+        for (i=0; i<p.state_count; i++) {
+                if (p.states[i].control != p.states[i].status) {
+                        dprintk("Different control (%x) and status values (%x)\n",
+                                p.states[i].control, p.states[i].status);
+                        result = -EINVAL;
+                        goto err_unreg;
+                }
+
+                if (!p.states[i].core_frequency) {
+                        dprintk("Zero core frequency for state %u\n", i);
+                        result = -EINVAL;
+                        goto err_unreg;
+                }
+
+                if (p.states[i].core_frequency > p.states[0].core_frequency) {
+                        dprintk("P%u has larger frequency (%u) than P0 (%u), skipping\n", i,
+                                p.states[i].core_frequency, p.states[0].core_frequency);
+                        p.states[i].core_frequency = 0;
+                        continue;
+                }
+        }
+
+        centrino_model[cpu] = kmalloc(sizeof(struct cpu_model), GFP_KERNEL);
+        if (!centrino_model[cpu]) {
+                result = -ENOMEM;
+                goto err_unreg;
+        }
+        memset(centrino_model[cpu], 0, sizeof(struct cpu_model));
+
+        centrino_model[cpu]->model_name=NULL;
+        centrino_model[cpu]->max_freq = p.states[0].core_frequency * 1000;
+        centrino_model[cpu]->op_points =  kmalloc(sizeof(struct cpufreq_frequency_table) *
+                                             (p.state_count + 1), GFP_KERNEL);
+        if (!centrino_model[cpu]->op_points) {
+                result = -ENOMEM;
+                goto err_kfree;
+        }
+
+        for (i=0; i<p.state_count; i++) {
+                centrino_model[cpu]->op_points[i].index = p.states[i].control;
+                centrino_model[cpu]->op_points[i].frequency = p.states[i].core_frequency * 1000;
+                dprintk("adding state %i with frequency %u and control value %04x\n", 
+                        i, centrino_model[cpu]->op_points[i].frequency, centrino_model[cpu]->op_points[i].index);
+        }
+        centrino_model[cpu]->op_points[p.state_count].frequency = CPUFREQ_TABLE_END;
+
+        cur_freq = get_cur_freq(cpu);
+
+        for (i=0; i<p.state_count; i++) {
+                if (!p.states[i].core_frequency) {
+                        dprintk("skipping state %u\n", i);
+                        centrino_model[cpu]->op_points[i].frequency = CPUFREQ_ENTRY_INVALID;
+                        continue;
+                }
+                
+                if (extract_clock(centrino_model[cpu]->op_points[i].index, cpu, 0) !=
+                    (centrino_model[cpu]->op_points[i].frequency)) {
+                        dprintk("Invalid encoded frequency (%u vs. %u)\n",
+                                extract_clock(centrino_model[cpu]->op_points[i].index, cpu, 0),
+                                centrino_model[cpu]->op_points[i].frequency);
+                        result = -EINVAL;
+                        goto err_kfree_all;
+                }
+
+                if (cur_freq == centrino_model[cpu]->op_points[i].frequency)
+                        p.state = i;
+        }
+
+        /* notify BIOS that we exist */
+        acpi_processor_notify_smm(THIS_MODULE);
+
+        return 0;
+
+ err_kfree_all:
+        kfree(centrino_model[cpu]->op_points);
+ err_kfree:
+        kfree(centrino_model[cpu]);
+ err_unreg:
+        acpi_processor_unregister_performance(&p, cpu);
+        dprintk(KERN_INFO PFX "invalid ACPI data\n");
+        return (result);
+}
+#else
+static inline int centrino_cpu_init_acpi(struct cpufreq_policy *policy) { return -ENODEV; }
+#endif
+
+static int centrino_cpu_init(struct cpufreq_policy *policy)
+{
+        struct cpuinfo_x86 *cpu = &cpu_data[policy->cpu];
+        unsigned freq;
+        unsigned l, h;
+        int ret;
+        int i;
+
+        /* Only Intel makes Enhanced Speedstep-capable CPUs */
+        if (cpu->x86_vendor != X86_VENDOR_INTEL || !cpu_has(cpu, X86_FEATURE_EST))
+                return -ENODEV;
+
+        for (i = 0; i < N_IDS; i++)
+                if (centrino_verify_cpu_id(cpu, &cpu_ids[i]))
+                        break;
+
+        if (i != N_IDS)
+                centrino_cpu[policy->cpu] = &cpu_ids[i];
+
+        if (is_const_loops_cpu(policy->cpu)) {
+                centrino_driver.flags |= CPUFREQ_CONST_LOOPS;
+        }
+
+        if (centrino_cpu_init_acpi(policy)) {
+                if (policy->cpu != 0)
+                        return -ENODEV;
+
+                if (!centrino_cpu[policy->cpu]) {
+                        dprintk(KERN_INFO PFX "found unsupported CPU with "
+                        "Enhanced SpeedStep: send /proc/cpuinfo to "
+                        MAINTAINER "\n");
+                        return -ENODEV;
+                }
+
+                if (centrino_cpu_init_table(policy)) {
+                        return -ENODEV;
+                }
+        }
+
+        /* Check to see if Enhanced SpeedStep is enabled, and try to
+           enable it if not. */
+        rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+
+        if (!(l & (1<<16))) {
+                l |= (1<<16);
+                dprintk("trying to enable Enhanced SpeedStep (%x)\n", l);
+                wrmsr(MSR_IA32_MISC_ENABLE, l, h);
+
+                /* check to see if it stuck */
+                rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+                if (!(l & (1<<16))) {
+                        printk(KERN_INFO PFX "couldn't enable Enhanced SpeedStep\n");
+                        return -ENODEV;
+                }
+        }
+
+        freq = get_cur_freq(policy->cpu);
+
+        policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+        policy->cpuinfo.transition_latency = 10000; /* 10uS transition latency */
+        policy->cur = freq;
+
+        dprintk("centrino_cpu_init: cur=%dkHz\n", policy->cur);
+
+        ret = cpufreq_frequency_table_cpuinfo(policy, centrino_model[policy->cpu]->op_points);
+        if (ret)
+                return (ret);
+
+        cpufreq_frequency_table_get_attr(centrino_model[policy->cpu]->op_points, policy->cpu);
+
+        return 0;
+}
+
+static int centrino_cpu_exit(struct cpufreq_policy *policy)
+{
+        unsigned int cpu = policy->cpu;
+
+        if (!centrino_model[cpu])
+                return -ENODEV;
+
+        cpufreq_frequency_table_put_attr(cpu);
+
+#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI
+        if (!centrino_model[cpu]->model_name) {
+                dprintk("unregistering and freeing ACPI data\n");
+                acpi_processor_unregister_performance(&p, cpu);
+                kfree(centrino_model[cpu]->op_points);
+                kfree(centrino_model[cpu]);
+        }
+#endif
+
+        centrino_model[cpu] = NULL;
+
+        return 0;
+}
+
+/**
+ * centrino_verify - verifies a new CPUFreq policy
+ * @policy: new policy
+ *
+ * Limit must be within this model's frequency range at least one
+ * border included.
+ */
+static int centrino_verify (struct cpufreq_policy *policy)
+{
+        return cpufreq_frequency_table_verify(policy, centrino_model[policy->cpu]->op_points);
+}
+
+/**
+ * centrino_setpolicy - set a new CPUFreq policy
+ * @policy: new policy
+ * @target_freq: the target frequency
+ * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
+ *
+ * Sets a new CPUFreq policy.
+ */
+static int centrino_target (struct cpufreq_policy *policy,
+                            unsigned int target_freq,
+                            unsigned int relation)
+{
+        unsigned int    newstate = 0;
+        unsigned int    msr, oldmsr, h, cpu = policy->cpu;
+        struct cpufreq_freqs    freqs;
+        cpumask_t               saved_mask;
+        int                     retval;
+
+        if (centrino_model[cpu] == NULL)
+                return -ENODEV;
+
+        /*
+         * Support for SMP systems.
+         * Make sure we are running on the CPU that wants to change frequency
+         */
+        saved_mask = current->cpus_allowed;
+        set_cpus_allowed(current, policy->cpus);
+        if (!cpu_isset(smp_processor_id(), policy->cpus)) {
+                dprintk("couldn't limit to CPUs in this domain\n");
+                return(-EAGAIN);
+        }
+
+        if (cpufreq_frequency_table_target(policy, centrino_model[cpu]->op_points, target_freq,
+                                           relation, &newstate)) {
+                retval = -EINVAL;
+                goto migrate_end;
+        }
+
+        msr = centrino_model[cpu]->op_points[newstate].index;
+        rdmsr(MSR_IA32_PERF_CTL, oldmsr, h);
+
+        if (msr == (oldmsr & 0xffff)) {
+                retval = 0;
+                dprintk("no change needed - msr was and needs to be %x\n", oldmsr);
+                goto migrate_end;
+        }
+
+        freqs.cpu = cpu;
+        freqs.old = extract_clock(oldmsr, cpu, 0);
+        freqs.new = extract_clock(msr, cpu, 0);
+
+        dprintk("target=%dkHz old=%d new=%d msr=%04x\n",
+                target_freq, freqs.old, freqs.new, msr);
+
+        cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+        /* all but 16 LSB are "reserved", so treat them with
+           care */
+        oldmsr &= ~0xffff;
+        msr &= 0xffff;
+        oldmsr |= msr;
+
+        wrmsr(MSR_IA32_PERF_CTL, oldmsr, h);
+
+        cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+        retval = 0;
+migrate_end:
+        set_cpus_allowed(current, saved_mask);
+        return (retval);
+}
+
+static struct freq_attr* centrino_attr[] = {
+        &cpufreq_freq_attr_scaling_available_freqs,
+        NULL,
+};
+
+static struct cpufreq_driver centrino_driver = {
+        .name           = "centrino", /* should be speedstep-centrino,
+                                         but there's a 16 char limit */
+        .init           = centrino_cpu_init,
+        .exit           = centrino_cpu_exit,
+        .verify         = centrino_verify,
+        .target         = centrino_target,
+        .get            = get_cur_freq,
+        .attr           = centrino_attr,
+        .owner          = THIS_MODULE,
+};
+
+
+/**
+ * centrino_init - initializes the Enhanced SpeedStep CPUFreq driver
+ *
+ * Initializes the Enhanced SpeedStep support. Returns -ENODEV on
+ * unsupported devices, -ENOENT if there's no voltage table for this
+ * particular CPU model, -EINVAL on problems during initiatization,
+ * and zero on success.
+ *
+ * This is quite picky.  Not only does the CPU have to advertise the
+ * "est" flag in the cpuid capability flags, we look for a specific
+ * CPU model and stepping, and we need to have the exact model name in
+ * our voltage tables.  That is, be paranoid about not releasing
+ * someone's valuable magic smoke.
+ */
+static int __init centrino_init(void)
+{
+        struct cpuinfo_x86 *cpu = cpu_data;
+
+        if (!cpu_has(cpu, X86_FEATURE_EST))
+                return -ENODEV;
+
+        return cpufreq_register_driver(&centrino_driver);
+}
+
+static void __exit centrino_exit(void)
+{
+        cpufreq_unregister_driver(&centrino_driver);
+}
+
+MODULE_AUTHOR ("Jeremy Fitzhardinge <jeremy@goop.org>");
+MODULE_DESCRIPTION ("Enhanced SpeedStep driver for Intel Pentium M processors.");
+MODULE_LICENSE ("GPL");
+
+late_initcall(centrino_init);
+module_exit(centrino_exit);
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-est-common.h b/arch/i386/kernel/cpu/cpufreq/speedstep-est-common.h
new file mode 100644
index 000000000000..5ce995c9d866
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-est-common.h
@@ -0,0 +1,25 @@
+/*
+ * Routines common for drivers handling Enhanced Speedstep Technology
+ *  Copyright (C) 2004 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2 -- see
+ *  COPYING for details.
+ */
+
+static inline int is_const_loops_cpu(unsigned int cpu)
+{
+        struct cpuinfo_x86      *c = cpu_data + cpu;
+
+        if (c->x86_vendor != X86_VENDOR_INTEL || !cpu_has(c, X86_FEATURE_EST))
+                return 0;
+
+        /*
+         * on P-4s, the TSC runs with constant frequency independent of cpu freq
+         * when we use EST
+         */
+        if (c->x86 == 0xf)
+                return 1;
+
+        return 0;
+}
+
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c b/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c
new file mode 100644
index 000000000000..5b7d18a06afa
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c
@@ -0,0 +1,424 @@
+/*
+ * (C) 2001  Dave Jones, Arjan van de ven.
+ * (C) 2002 - 2003  Dominik Brodowski <linux@brodo.de>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *  Based upon reverse engineered information, and on Intel documentation
+ *  for chipsets ICH2-M and ICH3-M.
+ *
+ *  Many thanks to Ducrot Bruno for finding and fixing the last
+ *  "missing link" for ICH2-M/ICH3-M support, and to Thomas Winkler
+ *  for extensive testing.
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+
+/*********************************************************************
+ *                        SPEEDSTEP - DEFINITIONS                    *
+ *********************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+
+#include "speedstep-lib.h"
+
+
+/* speedstep_chipset:
+ *   It is necessary to know which chipset is used. As accesses to
+ * this device occur at various places in this module, we need a
+ * static struct pci_dev * pointing to that device.
+ */
+static struct pci_dev *speedstep_chipset_dev;
+
+
+/* speedstep_processor
+ */
+static unsigned int speedstep_processor = 0;
+
+
+/*
+ *   There are only two frequency states for each processor. Values
+ * are in kHz for the time being.
+ */
+static struct cpufreq_frequency_table speedstep_freqs[] = {
+        {SPEEDSTEP_HIGH,        0},
+        {SPEEDSTEP_LOW,         0},
+        {0,                     CPUFREQ_TABLE_END},
+};
+
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-ich", msg)
+
+
+/**
+ * speedstep_set_state - set the SpeedStep state
+ * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
+ *
+ *   Tries to change the SpeedStep state.
+ */
+static void speedstep_set_state (unsigned int state)
+{
+        u32 pmbase;
+        u8 pm2_blk;
+        u8 value;
+        unsigned long flags;
+
+        if (!speedstep_chipset_dev || (state > 0x1))
+                return;
+
+        /* get PMBASE */
+        pci_read_config_dword(speedstep_chipset_dev, 0x40, &pmbase);
+        if (!(pmbase & 0x01)) {
+                printk(KERN_ERR "speedstep-ich: could not find speedstep register\n");
+                return;
+        }
+
+        pmbase &= 0xFFFFFFFE;
+        if (!pmbase) {
+                printk(KERN_ERR "speedstep-ich: could not find speedstep register\n");
+                return;
+        }
+
+        /* Disable IRQs */
+        local_irq_save(flags);
+
+        /* read state */
+        value = inb(pmbase + 0x50);
+
+        dprintk("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);
+
+        /* write new state */
+        value &= 0xFE;
+        value |= state;
+
+        dprintk("writing 0x%x to pmbase 0x%x + 0x50\n", value, pmbase);
+
+        /* Disable bus master arbitration */
+        pm2_blk = inb(pmbase + 0x20);
+        pm2_blk |= 0x01;
+        outb(pm2_blk, (pmbase + 0x20));
+
+        /* Actual transition */
+        outb(value, (pmbase + 0x50));
+
+        /* Restore bus master arbitration */
+        pm2_blk &= 0xfe;
+        outb(pm2_blk, (pmbase + 0x20));
+
+        /* check if transition was successful */
+        value = inb(pmbase + 0x50);
+
+        /* Enable IRQs */
+        local_irq_restore(flags);
+
+        dprintk("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);
+
+        if (state == (value & 0x1)) {
+                dprintk("change to %u MHz succeeded\n", (speedstep_get_processor_frequency(speedstep_processor) / 1000));
+        } else {
+                printk (KERN_ERR "cpufreq: change failed - I/O error\n");
+        }
+
+        return;
+}
+
+
+/**
+ * speedstep_activate - activate SpeedStep control in the chipset
+ *
+ *   Tries to activate the SpeedStep status and control registers.
+ * Returns -EINVAL on an unsupported chipset, and zero on success.
+ */
+static int speedstep_activate (void)
+{
+        u16 value = 0;
+
+        if (!speedstep_chipset_dev)
+                return -EINVAL;
+
+        pci_read_config_word(speedstep_chipset_dev, 0x00A0, &value);
+        if (!(value & 0x08)) {
+                value |= 0x08;
+                dprintk("activating SpeedStep (TM) registers\n");
+                pci_write_config_word(speedstep_chipset_dev, 0x00A0, value);
+        }
+
+        return 0;
+}
+
+
+/**
+ * speedstep_detect_chipset - detect the Southbridge which contains SpeedStep logic
+ *
+ *   Detects ICH2-M, ICH3-M and ICH4-M so far. The pci_dev points to
+ * the LPC bridge / PM module which contains all power-management
+ * functions. Returns the SPEEDSTEP_CHIPSET_-number for the detected
+ * chipset, or zero on failure.
+ */
+static unsigned int speedstep_detect_chipset (void)
+{
+        speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+                              PCI_DEVICE_ID_INTEL_82801DB_12,
+                              PCI_ANY_ID,
+                              PCI_ANY_ID,
+                              NULL);
+        if (speedstep_chipset_dev)
+                return 4; /* 4-M */
+
+        speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+                              PCI_DEVICE_ID_INTEL_82801CA_12,
+                              PCI_ANY_ID,
+                              PCI_ANY_ID,
+                              NULL);
+        if (speedstep_chipset_dev)
+                return 3; /* 3-M */
+
+
+        speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+                              PCI_DEVICE_ID_INTEL_82801BA_10,
+                              PCI_ANY_ID,
+                              PCI_ANY_ID,
+                              NULL);
+        if (speedstep_chipset_dev) {
+                /* speedstep.c causes lockups on Dell Inspirons 8000 and
+                 * 8100 which use a pretty old revision of the 82815
+                 * host brige. Abort on these systems.
+                 */
+                static struct pci_dev *hostbridge;
+                u8 rev = 0;
+
+                hostbridge  = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+                              PCI_DEVICE_ID_INTEL_82815_MC,
+                              PCI_ANY_ID,
+                              PCI_ANY_ID,
+                              NULL);
+
+                if (!hostbridge)
+                        return 2; /* 2-M */
+
+                pci_read_config_byte(hostbridge, PCI_REVISION_ID, &rev);
+                if (rev < 5) {
+                        dprintk("hostbridge does not support speedstep\n");
+                        speedstep_chipset_dev = NULL;
+                        pci_dev_put(hostbridge);
+                        return 0;
+                }
+
+                pci_dev_put(hostbridge);
+                return 2; /* 2-M */
+        }
+
+        return 0;
+}
+
+static unsigned int _speedstep_get(cpumask_t cpus)
+{
+        unsigned int speed;
+        cpumask_t cpus_allowed;
+
+        cpus_allowed = current->cpus_allowed;
+        set_cpus_allowed(current, cpus);
+        speed = speedstep_get_processor_frequency(speedstep_processor);
+        set_cpus_allowed(current, cpus_allowed);
+        dprintk("detected %u kHz as current frequency\n", speed);
+        return speed;
+}
+
+static unsigned int speedstep_get(unsigned int cpu)
+{
+        return _speedstep_get(cpumask_of_cpu(cpu));
+}
+
+/**
+ * speedstep_target - set a new CPUFreq policy
+ * @policy: new policy
+ * @target_freq: the target frequency
+ * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
+ *
+ * Sets a new CPUFreq policy.
+ */
+static int speedstep_target (struct cpufreq_policy *policy,
+                             unsigned int target_freq,
+                             unsigned int relation)
+{
+        unsigned int newstate = 0;
+        struct cpufreq_freqs freqs;
+        cpumask_t cpus_allowed;
+        int i;
+
+        if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], target_freq, relation, &newstate))
+                return -EINVAL;
+
+        freqs.old = _speedstep_get(policy->cpus);
+        freqs.new = speedstep_freqs[newstate].frequency;
+        freqs.cpu = policy->cpu;
+
+        dprintk("transiting from %u to %u kHz\n", freqs.old, freqs.new);
+
+        /* no transition necessary */
+        if (freqs.old == freqs.new)
+                return 0;
+
+        cpus_allowed = current->cpus_allowed;
+
+        for_each_cpu_mask(i, policy->cpus) {
+                freqs.cpu = i;
+                cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+        }
+
+        /* switch to physical CPU where state is to be changed */
+        set_cpus_allowed(current, policy->cpus);
+
+        speedstep_set_state(newstate);
+
+        /* allow to be run on all CPUs */
+        set_cpus_allowed(current, cpus_allowed);
+
+        for_each_cpu_mask(i, policy->cpus) {
+                freqs.cpu = i;
+                cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+        }
+
+        return 0;
+}
+
+
+/**
+ * speedstep_verify - verifies a new CPUFreq policy
+ * @policy: new policy
+ *
+ * Limit must be within speedstep_low_freq and speedstep_high_freq, with
+ * at least one border included.
+ */
+static int speedstep_verify (struct cpufreq_policy *policy)
+{
+        return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]);
+}
+
+
+static int speedstep_cpu_init(struct cpufreq_policy *policy)
+{
+        int result = 0;
+        unsigned int speed;
+        cpumask_t cpus_allowed;
+
+        /* only run on CPU to be set, or on its sibling */
+#ifdef CONFIG_SMP
+        policy->cpus = cpu_sibling_map[policy->cpu];
+#endif
+
+        cpus_allowed = current->cpus_allowed;
+        set_cpus_allowed(current, policy->cpus);
+
+        /* detect low and high frequency */
+        result = speedstep_get_freqs(speedstep_processor,
+                                     &speedstep_freqs[SPEEDSTEP_LOW].frequency,
+                                     &speedstep_freqs[SPEEDSTEP_HIGH].frequency,
+                                     &speedstep_set_state);
+        set_cpus_allowed(current, cpus_allowed);
+        if (result)
+                return result;
+
+        /* get current speed setting */
+        speed = _speedstep_get(policy->cpus);
+        if (!speed)
+                return -EIO;
+
+        dprintk("currently at %s speed setting - %i MHz\n",
+                (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high",
+                (speed / 1000));
+
+        /* cpuinfo and default policy values */
+        policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+        policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+        policy->cur = speed;
+
+        result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs);
+        if (result)
+                return (result);
+
+        cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu);
+
+        return 0;
+}
+
+
+static int speedstep_cpu_exit(struct cpufreq_policy *policy)
+{
+        cpufreq_frequency_table_put_attr(policy->cpu);
+        return 0;
+}
+
+static struct freq_attr* speedstep_attr[] = {
+        &cpufreq_freq_attr_scaling_available_freqs,
+        NULL,
+};
+
+
+static struct cpufreq_driver speedstep_driver = {
+        .name   = "speedstep-ich",
+        .verify = speedstep_verify,
+        .target = speedstep_target,
+        .init   = speedstep_cpu_init,
+        .exit   = speedstep_cpu_exit,
+        .get    = speedstep_get,
+        .owner  = THIS_MODULE,
+        .attr   = speedstep_attr,
+};
+
+
+/**
+ * speedstep_init - initializes the SpeedStep CPUFreq driver
+ *
+ *   Initializes the SpeedStep support. Returns -ENODEV on unsupported
+ * devices, -EINVAL on problems during initiatization, and zero on
+ * success.
+ */
+static int __init speedstep_init(void)
+{
+        /* detect processor */
+        speedstep_processor = speedstep_detect_processor();
+        if (!speedstep_processor) {
+                dprintk("Intel(R) SpeedStep(TM) capable processor not found\n");
+                return -ENODEV;
+        }
+
+        /* detect chipset */
+        if (!speedstep_detect_chipset()) {
+                dprintk("Intel(R) SpeedStep(TM) for this chipset not (yet) available.\n");
+                return -ENODEV;
+        }
+
+        /* activate speedstep support */
+        if (speedstep_activate()) {
+                pci_dev_put(speedstep_chipset_dev);
+                return -EINVAL;
+        }
+
+        return cpufreq_register_driver(&speedstep_driver);
+}
+
+
+/**
+ * speedstep_exit - unregisters SpeedStep support
+ *
+ *   Unregisters SpeedStep support.
+ */
+static void __exit speedstep_exit(void)
+{
+        pci_dev_put(speedstep_chipset_dev);
+        cpufreq_unregister_driver(&speedstep_driver);
+}
+
+
+MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>, Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION ("Speedstep driver for Intel mobile processors on chipsets with ICH-M southbridges.");
+MODULE_LICENSE ("GPL");
+
+module_init(speedstep_init);
+module_exit(speedstep_exit);
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c
new file mode 100644
index 000000000000..8ba430a9c3a2
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c
@@ -0,0 +1,385 @@
+/*
+ * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  Library for common functions for Intel SpeedStep v.1 and v.2 support
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h> 
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+
+#include <asm/msr.h>
+#include "speedstep-lib.h"
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-lib", msg)
+
+#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK
+static int relaxed_check = 0;
+#else
+#define relaxed_check 0
+#endif
+
+/*********************************************************************
+ *                   GET PROCESSOR CORE SPEED IN KHZ                 *
+ *********************************************************************/
+
+static unsigned int pentium3_get_frequency (unsigned int processor)
+{
+        /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */
+        struct {
+                unsigned int ratio;     /* Frequency Multiplier (x10) */
+                u8 bitmap;              /* power on configuration bits
+                                           [27, 25:22] (in MSR 0x2a) */
+        } msr_decode_mult [] = {
+                { 30, 0x01 },
+                { 35, 0x05 },
+                { 40, 0x02 },
+                { 45, 0x06 },
+                { 50, 0x00 },
+                { 55, 0x04 },
+                { 60, 0x0b },
+                { 65, 0x0f },
+                { 70, 0x09 },
+                { 75, 0x0d },
+                { 80, 0x0a },
+                { 85, 0x26 },
+                { 90, 0x20 },
+                { 100, 0x2b },
+                { 0, 0xff }     /* error or unknown value */
+        };
+
+        /* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */
+        struct {
+                unsigned int value;     /* Front Side Bus speed in MHz */
+                u8 bitmap;              /* power on configuration bits [18: 19]
+                                           (in MSR 0x2a) */
+        } msr_decode_fsb [] = {
+                {  66, 0x0 },
+                { 100, 0x2 },
+                { 133, 0x1 },
+                {   0, 0xff}
+        };
+
+        u32     msr_lo, msr_tmp;
+        int     i = 0, j = 0;
+
+        /* read MSR 0x2a - we only need the low 32 bits */
+        rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
+        dprintk("P3 - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
+        msr_tmp = msr_lo;
+
+        /* decode the FSB */
+        msr_tmp &= 0x00c0000;
+        msr_tmp >>= 18;
+        while (msr_tmp != msr_decode_fsb[i].bitmap) {
+                if (msr_decode_fsb[i].bitmap == 0xff)
+                        return 0;
+                i++;
+        }
+
+        /* decode the multiplier */
+        if (processor == SPEEDSTEP_PROCESSOR_PIII_C_EARLY) {
+                dprintk("workaround for early PIIIs\n");
+                msr_lo &= 0x03c00000;
+        } else
+                msr_lo &= 0x0bc00000;
+        msr_lo >>= 22;
+        while (msr_lo != msr_decode_mult[j].bitmap) {
+                if (msr_decode_mult[j].bitmap == 0xff)
+                        return 0;
+                j++;
+        }
+
+        dprintk("speed is %u\n", (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100));
+
+        return (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100);
+}
+
+
+static unsigned int pentiumM_get_frequency(void)
+{
+        u32     msr_lo, msr_tmp;
+
+        rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
+        dprintk("PM - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
+
+        /* see table B-2 of 24547212.pdf */
+        if (msr_lo & 0x00040000) {
+                printk(KERN_DEBUG "speedstep-lib: PM - invalid FSB: 0x%x 0x%x\n", msr_lo, msr_tmp);
+                return 0;
+        }
+
+        msr_tmp = (msr_lo >> 22) & 0x1f;
+        dprintk("bits 22-26 are 0x%x, speed is %u\n", msr_tmp, (msr_tmp * 100 * 1000));
+
+        return (msr_tmp * 100 * 1000);
+}
+
+
+static unsigned int pentium4_get_frequency(void)
+{
+        struct cpuinfo_x86 *c = &boot_cpu_data;
+        u32 msr_lo, msr_hi, mult;
+        unsigned int fsb = 0;
+
+        rdmsr(0x2c, msr_lo, msr_hi);
+
+        dprintk("P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr_lo, msr_hi);
+
+        /* decode the FSB: see IA-32 Intel (C) Architecture Software 
+         * Developer's Manual, Volume 3: System Prgramming Guide,
+         * revision #12 in Table B-1: MSRs in the Pentium 4 and
+         * Intel Xeon Processors, on page B-4 and B-5.
+         */
+        if (c->x86_model < 2)
+                fsb = 100 * 1000;
+        else {
+                u8 fsb_code = (msr_lo >> 16) & 0x7;
+                switch (fsb_code) {
+                case 0:
+                        fsb = 100 * 1000;
+                        break;
+                case 1:
+                        fsb = 13333 * 10;
+                        break;
+                case 2:
+                        fsb = 200 * 1000;
+                        break;
+                }
+        }
+
+        if (!fsb)
+                printk(KERN_DEBUG "speedstep-lib: couldn't detect FSB speed. Please send an e-mail to <linux@brodo.de>\n");
+
+        /* Multiplier. */
+        if (c->x86_model < 2)
+                mult = msr_lo >> 27;
+        else
+                mult = msr_lo >> 24;
+
+        dprintk("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n", fsb, mult, (fsb * mult));
+
+        return (fsb * mult);
+}
+
+ 
+unsigned int speedstep_get_processor_frequency(unsigned int processor)
+{
+        switch (processor) {
+        case SPEEDSTEP_PROCESSOR_PM:
+                return pentiumM_get_frequency();
+        case SPEEDSTEP_PROCESSOR_P4D:
+        case SPEEDSTEP_PROCESSOR_P4M:
+                return pentium4_get_frequency();
+        case SPEEDSTEP_PROCESSOR_PIII_T:
+        case SPEEDSTEP_PROCESSOR_PIII_C:
+        case SPEEDSTEP_PROCESSOR_PIII_C_EARLY:
+                return pentium3_get_frequency(processor);
+        default:
+                return 0;
+        };
+        return 0;
+}
+EXPORT_SYMBOL_GPL(speedstep_get_processor_frequency);
+
+
+/*********************************************************************
+ *                 DETECT SPEEDSTEP-CAPABLE PROCESSOR                *
+ *********************************************************************/
+
+unsigned int speedstep_detect_processor (void)
+{
+        struct cpuinfo_x86 *c = cpu_data;
+        u32                     ebx, msr_lo, msr_hi;
+
+        dprintk("x86: %x, model: %x\n", c->x86, c->x86_model);
+
+        if ((c->x86_vendor != X86_VENDOR_INTEL) || 
+            ((c->x86 != 6) && (c->x86 != 0xF)))
+                return 0;
+
+        if (c->x86 == 0xF) {
+                /* Intel Mobile Pentium 4-M
+                 * or Intel Mobile Pentium 4 with 533 MHz FSB */
+                if (c->x86_model != 2)
+                        return 0;
+
+                ebx = cpuid_ebx(0x00000001);
+                ebx &= 0x000000FF;
+
+                dprintk("ebx value is %x, x86_mask is %x\n", ebx, c->x86_mask);
+
+                switch (c->x86_mask) {
+                case 4: 
+                        /*
+                         * B-stepping [M-P4-M] 
+                         * sample has ebx = 0x0f, production has 0x0e.
+                         */
+                        if ((ebx == 0x0e) || (ebx == 0x0f))
+                                return SPEEDSTEP_PROCESSOR_P4M;
+                        break;
+                case 7: 
+                        /*
+                         * C-stepping [M-P4-M]
+                         * needs to have ebx=0x0e, else it's a celeron:
+                         * cf. 25130917.pdf / page 7, footnote 5 even
+                         * though 25072120.pdf / page 7 doesn't say
+                         * samples are only of B-stepping...
+                         */
+                        if (ebx == 0x0e)
+                                return SPEEDSTEP_PROCESSOR_P4M;
+                        break;
+                case 9:
+                        /*
+                         * D-stepping [M-P4-M or M-P4/533]
+                         *
+                         * this is totally strange: CPUID 0x0F29 is
+                         * used by M-P4-M, M-P4/533 and(!) Celeron CPUs.
+                         * The latter need to be sorted out as they don't
+                         * support speedstep.
+                         * Celerons with CPUID 0x0F29 may have either
+                         * ebx=0x8 or 0xf -- 25130917.pdf doesn't say anything
+                         * specific.
+                         * M-P4-Ms may have either ebx=0xe or 0xf [see above]
+                         * M-P4/533 have either ebx=0xe or 0xf. [25317607.pdf]
+                         * also, M-P4M HTs have ebx=0x8, too
+                         * For now, they are distinguished by the model_id string
+                         */
+                        if ((ebx == 0x0e) || (strstr(c->x86_model_id,"Mobile Intel(R) Pentium(R) 4") != NULL)) 
+                                return SPEEDSTEP_PROCESSOR_P4M;
+                        break;
+                default:
+                        break;
+                }
+                return 0;
+        }
+
+        switch (c->x86_model) {
+        case 0x0B: /* Intel PIII [Tualatin] */
+                /* cpuid_ebx(1) is 0x04 for desktop PIII, 
+                                   0x06 for mobile PIII-M */
+                ebx = cpuid_ebx(0x00000001);
+                dprintk("ebx is %x\n", ebx);
+
+                ebx &= 0x000000FF;
+
+                if (ebx != 0x06)
+                        return 0;
+
+                /* So far all PIII-M processors support SpeedStep. See
+                 * Intel's 24540640.pdf of June 2003 
+                 */
+
+                return SPEEDSTEP_PROCESSOR_PIII_T;
+
+        case 0x08: /* Intel PIII [Coppermine] */
+
+                /* all mobile PIII Coppermines have FSB 100 MHz
+                 * ==> sort out a few desktop PIIIs. */
+                rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_hi);
+                dprintk("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n", msr_lo, msr_hi);
+                msr_lo &= 0x00c0000;
+                if (msr_lo != 0x0080000)
+                        return 0;
+
+                /*
+                 * If the processor is a mobile version,
+                 * platform ID has bit 50 set
+                 * it has SpeedStep technology if either
+                 * bit 56 or 57 is set
+                 */
+                rdmsr(MSR_IA32_PLATFORM_ID, msr_lo, msr_hi);
+                dprintk("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n", msr_lo, msr_hi);
+                if ((msr_hi & (1<<18)) && (relaxed_check ? 1 : (msr_hi & (3<<24)))) {
+                        if (c->x86_mask == 0x01) {
+                                dprintk("early PIII version\n");
+                                return SPEEDSTEP_PROCESSOR_PIII_C_EARLY;
+                        } else
+                                return SPEEDSTEP_PROCESSOR_PIII_C;
+                }
+
+        default:
+                return 0;
+        }
+}
+EXPORT_SYMBOL_GPL(speedstep_detect_processor);
+
+
+/*********************************************************************
+ *                     DETECT SPEEDSTEP SPEEDS                       *
+ *********************************************************************/
+
+unsigned int speedstep_get_freqs(unsigned int processor,
+                                  unsigned int *low_speed,
+                                  unsigned int *high_speed,
+                                  void (*set_state) (unsigned int state))
+{
+        unsigned int prev_speed;
+        unsigned int ret = 0;
+        unsigned long flags;
+
+        if ((!processor) || (!low_speed) || (!high_speed) || (!set_state))
+                return -EINVAL;
+
+        dprintk("trying to determine both speeds\n");
+
+        /* get current speed */
+        prev_speed = speedstep_get_processor_frequency(processor);
+        if (!prev_speed)
+                return -EIO;
+
+        dprintk("previous seped is %u\n", prev_speed);
+        
+        local_irq_save(flags);
+
+        /* switch to low state */
+        set_state(SPEEDSTEP_LOW);
+        *low_speed = speedstep_get_processor_frequency(processor);
+        if (!*low_speed) {
+                ret = -EIO;
+                goto out;
+        }
+
+        dprintk("low seped is %u\n", *low_speed);
+
+        /* switch to high state */
+        set_state(SPEEDSTEP_HIGH);
+        *high_speed = speedstep_get_processor_frequency(processor);
+        if (!*high_speed) {
+                ret = -EIO;
+                goto out;
+        }
+
+        dprintk("high seped is %u\n", *high_speed);
+
+        if (*low_speed == *high_speed) {
+                ret = -ENODEV;
+                goto out;
+        }
+
+        /* switch to previous state, if necessary */
+        if (*high_speed != prev_speed)
+                set_state(SPEEDSTEP_LOW);
+
+ out:
+        local_irq_restore(flags);
+        return (ret);
+}
+EXPORT_SYMBOL_GPL(speedstep_get_freqs);
+
+#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK
+module_param(relaxed_check, int, 0444);
+MODULE_PARM_DESC(relaxed_check, "Don't do all checks for speedstep capability.");
+#endif
+
+MODULE_AUTHOR ("Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION ("Library for Intel SpeedStep 1 or 2 cpufreq drivers.");
+MODULE_LICENSE ("GPL");
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h
new file mode 100644
index 000000000000..261a2c9b7f6b
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h
@@ -0,0 +1,47 @@
+/*
+ * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  Library for common functions for Intel SpeedStep v.1 and v.2 support
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+
+
+/* processors */
+
+#define SPEEDSTEP_PROCESSOR_PIII_C_EARLY        0x00000001  /* Coppermine core */
+#define SPEEDSTEP_PROCESSOR_PIII_C              0x00000002  /* Coppermine core */
+#define SPEEDSTEP_PROCESSOR_PIII_T              0x00000003  /* Tualatin core */
+#define SPEEDSTEP_PROCESSOR_P4M                 0x00000004  /* P4-M  */
+
+/* the following processors are not speedstep-capable and are not auto-detected
+ * in speedstep_detect_processor(). However, their speed can be detected using
+ * the speedstep_get_processor_frequency() call. */
+#define SPEEDSTEP_PROCESSOR_PM                  0xFFFFFF03  /* Pentium M  */
+#define SPEEDSTEP_PROCESSOR_P4D                 0xFFFFFF04  /* desktop P4  */
+
+/* speedstep states -- only two of them */
+
+#define SPEEDSTEP_HIGH                  0x00000000
+#define SPEEDSTEP_LOW                   0x00000001
+
+
+/* detect a speedstep-capable processor */
+extern unsigned int speedstep_detect_processor (void);
+
+/* detect the current speed (in khz) of the processor */
+extern unsigned int speedstep_get_processor_frequency(unsigned int processor);
+
+
+/* detect the low and high speeds of the processor. The callback 
+ * set_state"'s first argument is either SPEEDSTEP_HIGH or 
+ * SPEEDSTEP_LOW; the second argument is zero so that no 
+ * cpufreq_notify_transition calls are initiated.
+ */
+extern unsigned int speedstep_get_freqs(unsigned int processor,
+          unsigned int *low_speed,
+          unsigned int *high_speed,
+          void (*set_state) (unsigned int state));
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
new file mode 100644
index 000000000000..79440b3f087e
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
@@ -0,0 +1,424 @@
+/*
+ * Intel SpeedStep SMI driver.
+ *
+ * (C) 2003  Hiroshi Miura <miura@da-cha.org>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ */
+
+
+/*********************************************************************
+ *                        SPEEDSTEP - DEFINITIONS                    *
+ *********************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h> 
+#include <linux/moduleparam.h> 
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <asm/ist.h>
+
+#include "speedstep-lib.h"
+
+/* speedstep system management interface port/command.
+ *
+ * These parameters are got from IST-SMI BIOS call.
+ * If user gives it, these are used.
+ * 
+ */
+static int              smi_port        = 0;
+static int              smi_cmd         = 0;
+static unsigned int     smi_sig         = 0;
+
+/* info about the processor */
+static unsigned int     speedstep_processor = 0;
+
+/* 
+ *   There are only two frequency states for each processor. Values
+ * are in kHz for the time being.
+ */
+static struct cpufreq_frequency_table speedstep_freqs[] = {
+        {SPEEDSTEP_HIGH,        0},
+        {SPEEDSTEP_LOW,         0},
+        {0,                     CPUFREQ_TABLE_END},
+};
+
+#define GET_SPEEDSTEP_OWNER 0
+#define GET_SPEEDSTEP_STATE 1
+#define SET_SPEEDSTEP_STATE 2
+#define GET_SPEEDSTEP_FREQS 4
+
+/* how often shall the SMI call be tried if it failed, e.g. because
+ * of DMA activity going on? */
+#define SMI_TRIES 5
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-smi", msg)
+
+/**
+ * speedstep_smi_ownership
+ */
+static int speedstep_smi_ownership (void)
+{
+        u32 command, result, magic;
+        u32 function = GET_SPEEDSTEP_OWNER;
+        unsigned char magic_data[] = "Copyright (c) 1999 Intel Corporation";
+
+        command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
+        magic = virt_to_phys(magic_data);
+
+        dprintk("trying to obtain ownership with command %x at port %x\n", command, smi_port);
+
+        __asm__ __volatile__(
+                "out %%al, (%%dx)\n"
+                : "=D" (result)
+                : "a" (command), "b" (function), "c" (0), "d" (smi_port), "D" (0), "S" (magic)
+        );
+
+        dprintk("result is %x\n", result);
+
+        return result;
+}
+
+/**
+ * speedstep_smi_get_freqs - get SpeedStep preferred & current freq.
+ * @low: the low frequency value is placed here
+ * @high: the high frequency value is placed here
+ *
+ * Only available on later SpeedStep-enabled systems, returns false results or
+ * even hangs [cf. bugme.osdl.org # 1422] on earlier systems. Empirical testing
+ * shows that the latter occurs if !(ist_info.event & 0xFFFF).
+ */
+static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high)
+{
+        u32 command, result = 0, edi, high_mhz, low_mhz;
+        u32 state=0;
+        u32 function = GET_SPEEDSTEP_FREQS;
+
+        if (!(ist_info.event & 0xFFFF)) {
+                dprintk("bug #1422 -- can't read freqs from BIOS\n", result);
+                return -ENODEV;
+        }
+
+        command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
+
+        dprintk("trying to determine frequencies with command %x at port %x\n", command, smi_port);
+
+        __asm__ __volatile__("movl $0, %%edi\n"
+                "out %%al, (%%dx)\n"
+                : "=a" (result), "=b" (high_mhz), "=c" (low_mhz), "=d" (state), "=D" (edi)
+                : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0)
+        );
+
+        dprintk("result %x, low_freq %u, high_freq %u\n", result, low_mhz, high_mhz);
+
+        /* abort if results are obviously incorrect... */
+        if ((high_mhz + low_mhz) < 600)
+                return -EINVAL;
+
+        *high = high_mhz * 1000;
+        *low  = low_mhz  * 1000;
+
+        return result;
+} 
+
+/**
+ * speedstep_get_state - set the SpeedStep state
+ * @state: processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
+ *
+ */
+static int speedstep_get_state (void)
+{
+        u32 function=GET_SPEEDSTEP_STATE;
+        u32 result, state, edi, command;
+
+        command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
+
+        dprintk("trying to determine current setting with command %x at port %x\n", command, smi_port);
+
+        __asm__ __volatile__("movl $0, %%edi\n"
+                "out %%al, (%%dx)\n"
+                : "=a" (result), "=b" (state), "=D" (edi)
+                : "a" (command), "b" (function), "c" (0), "d" (smi_port), "S" (0)
+        );
+
+        dprintk("state is %x, result is %x\n", state, result);
+
+        return (state & 1);
+}
+
+
+/**
+ * speedstep_set_state - set the SpeedStep state
+ * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
+ *
+ */
+static void speedstep_set_state (unsigned int state)
+{
+        unsigned int result = 0, command, new_state;
+        unsigned long flags;
+        unsigned int function=SET_SPEEDSTEP_STATE;
+        unsigned int retry = 0;
+
+        if (state > 0x1)
+                return;
+
+        /* Disable IRQs */
+        local_irq_save(flags);
+
+        command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
+
+        dprintk("trying to set frequency to state %u with command %x at port %x\n", state, command, smi_port);
+
+        do {
+                if (retry) {
+                        dprintk("retry %u, previous result %u, waiting...\n", retry, result);
+                        mdelay(retry * 50);
+                }
+                retry++;
+                __asm__ __volatile__(
+                        "movl $0, %%edi\n"
+                        "out %%al, (%%dx)\n"
+                        : "=b" (new_state), "=D" (result)
+                        : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0)
+                        );
+        } while ((new_state != state) && (retry <= SMI_TRIES));
+
+        /* enable IRQs */
+        local_irq_restore(flags);
+
+        if (new_state == state) {
+                dprintk("change to %u MHz succeeded after %u tries with result %u\n", (speedstep_freqs[new_state].frequency / 1000), retry, result);
+        } else {
+                printk(KERN_ERR "cpufreq: change failed with new_state %u and result %u\n", new_state, result);
+        }
+
+        return;
+}
+
+
+/**
+ * speedstep_target - set a new CPUFreq policy
+ * @policy: new policy
+ * @target_freq: new freq
+ * @relation: 
+ *
+ * Sets a new CPUFreq policy/freq.
+ */
+static int speedstep_target (struct cpufreq_policy *policy,
+                        unsigned int target_freq, unsigned int relation)
+{
+        unsigned int newstate = 0;
+        struct cpufreq_freqs freqs;
+
+        if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], target_freq, relation, &newstate))
+                return -EINVAL;
+
+        freqs.old = speedstep_freqs[speedstep_get_state()].frequency;
+        freqs.new = speedstep_freqs[newstate].frequency;
+        freqs.cpu = 0; /* speedstep.c is UP only driver */
+
+        if (freqs.old == freqs.new)
+                return 0;
+
+        cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+        speedstep_set_state(newstate);
+        cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+        return 0;
+}
+
+
+/**
+ * speedstep_verify - verifies a new CPUFreq policy
+ * @policy: new policy
+ *
+ * Limit must be within speedstep_low_freq and speedstep_high_freq, with
+ * at least one border included.
+ */
+static int speedstep_verify (struct cpufreq_policy *policy)
+{
+        return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]);
+}
+
+
+static int speedstep_cpu_init(struct cpufreq_policy *policy)
+{
+        int result;
+        unsigned int speed,state;
+
+        /* capability check */
+        if (policy->cpu != 0)
+                return -ENODEV;
+
+        result = speedstep_smi_ownership();
+        if (result) {
+                dprintk("fails in aquiring ownership of a SMI interface.\n");
+                return -EINVAL;
+        }
+
+        /* detect low and high frequency */
+        result = speedstep_smi_get_freqs(&speedstep_freqs[SPEEDSTEP_LOW].frequency,
+                                &speedstep_freqs[SPEEDSTEP_HIGH].frequency);
+        if (result) {
+                /* fall back to speedstep_lib.c dection mechanism: try both states out */
+                dprintk("could not detect low and high frequencies by SMI call.\n");
+                result = speedstep_get_freqs(speedstep_processor,
+                                &speedstep_freqs[SPEEDSTEP_LOW].frequency,
+                                &speedstep_freqs[SPEEDSTEP_HIGH].frequency,
+                                &speedstep_set_state);
+
+                if (result) {
+                        dprintk("could not detect two different speeds -- aborting.\n");
+                        return result;
+                } else
+                        dprintk("workaround worked.\n");
+        }
+
+        /* get current speed setting */
+        state = speedstep_get_state();
+        speed = speedstep_freqs[state].frequency;
+
+        dprintk("currently at %s speed setting - %i MHz\n", 
+                (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high",
+                (speed / 1000));
+
+        /* cpuinfo and default policy values */
+        policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+        policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+        policy->cur = speed;
+
+        result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs);
+        if (result)
+                return (result);
+
+        cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu);
+
+        return 0;
+}
+
+static int speedstep_cpu_exit(struct cpufreq_policy *policy)
+{
+        cpufreq_frequency_table_put_attr(policy->cpu);
+        return 0;
+}
+
+static unsigned int speedstep_get(unsigned int cpu)
+{
+        if (cpu)
+                return -ENODEV;
+        return speedstep_get_processor_frequency(speedstep_processor);
+}
+
+
+static int speedstep_resume(struct cpufreq_policy *policy)
+{
+        int result = speedstep_smi_ownership();
+
+        if (result)
+                dprintk("fails in re-aquiring ownership of a SMI interface.\n");
+
+        return result;
+}
+
+static struct freq_attr* speedstep_attr[] = {
+        &cpufreq_freq_attr_scaling_available_freqs,
+        NULL,
+};
+
+static struct cpufreq_driver speedstep_driver = {
+        .name           = "speedstep-smi",
+        .verify         = speedstep_verify,
+        .target         = speedstep_target,
+        .init           = speedstep_cpu_init,
+        .exit           = speedstep_cpu_exit,
+        .get            = speedstep_get,
+        .resume         = speedstep_resume,
+        .owner          = THIS_MODULE,
+        .attr           = speedstep_attr,
+};
+
+/**
+ * speedstep_init - initializes the SpeedStep CPUFreq driver
+ *
+ *   Initializes the SpeedStep support. Returns -ENODEV on unsupported
+ * BIOS, -EINVAL on problems during initiatization, and zero on
+ * success.
+ */
+static int __init speedstep_init(void)
+{
+        speedstep_processor = speedstep_detect_processor();
+
+        switch (speedstep_processor) {
+        case SPEEDSTEP_PROCESSOR_PIII_T:
+        case SPEEDSTEP_PROCESSOR_PIII_C:
+        case SPEEDSTEP_PROCESSOR_PIII_C_EARLY:
+                break;
+        default:
+                speedstep_processor = 0;
+        }
+
+        if (!speedstep_processor) {
+                dprintk ("No supported Intel CPU detected.\n");
+                return -ENODEV;
+        }
+
+        dprintk("signature:0x%.8lx, command:0x%.8lx, event:0x%.8lx, perf_level:0x%.8lx.\n", 
+                ist_info.signature, ist_info.command, ist_info.event, ist_info.perf_level);
+
+
+        /* Error if no IST-SMI BIOS or no PARM 
+                 sig= 'ISGE' aka 'Intel Speedstep Gate E' */
+        if ((ist_info.signature !=  0x47534943) && ( 
+            (smi_port == 0) || (smi_cmd == 0)))
+                return -ENODEV;
+
+        if (smi_sig == 1)
+                smi_sig = 0x47534943;
+        else
+                smi_sig = ist_info.signature;
+
+        /* setup smi_port from MODLULE_PARM or BIOS */
+        if ((smi_port > 0xff) || (smi_port < 0)) {
+                return -EINVAL;
+        } else if (smi_port == 0) {
+                smi_port = ist_info.command & 0xff;
+        }
+
+        if ((smi_cmd > 0xff) || (smi_cmd < 0)) {
+                return -EINVAL;
+        } else if (smi_cmd == 0) {
+                smi_cmd = (ist_info.command >> 16) & 0xff;
+        }
+
+        return cpufreq_register_driver(&speedstep_driver);
+}
+
+
+/**
+ * speedstep_exit - unregisters SpeedStep support
+ *
+ *   Unregisters SpeedStep support.
+ */
+static void __exit speedstep_exit(void)
+{
+        cpufreq_unregister_driver(&speedstep_driver);
+}
+
+module_param(smi_port,  int, 0444);
+module_param(smi_cmd,   int, 0444);
+module_param(smi_sig,  uint, 0444);
+
+MODULE_PARM_DESC(smi_port, "Override the BIOS-given IST port with this value -- Intel's default setting is 0xb2");
+MODULE_PARM_DESC(smi_cmd, "Override the BIOS-given IST command with this value -- Intel's default setting is 0x82");
+MODULE_PARM_DESC(smi_sig, "Set to 1 to fake the IST signature when using the SMI interface.");
+
+MODULE_AUTHOR ("Hiroshi Miura");
+MODULE_DESCRIPTION ("Speedstep driver for IST applet SMI interface.");
+MODULE_LICENSE ("GPL");
+
+module_init(speedstep_init);
+module_exit(speedstep_exit);
diff --git a/arch/i386/kernel/cpu/cyrix.c b/arch/i386/kernel/cpu/cyrix.c
new file mode 100644
index 000000000000..ba4b01138c8f
--- /dev/null
+++ b/arch/i386/kernel/cpu/cyrix.c
@@ -0,0 +1,439 @@
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/timer.h>
+
+#include "cpu.h"
+
+/*
+ * Read NSC/Cyrix DEVID registers (DIR) to get more detailed info. about the CPU
+ */
+static void __init do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
+{
+        unsigned char ccr2, ccr3;
+        unsigned long flags;
+        
+        /* we test for DEVID by checking whether CCR3 is writable */
+        local_irq_save(flags);
+        ccr3 = getCx86(CX86_CCR3);
+        setCx86(CX86_CCR3, ccr3 ^ 0x80);
+        getCx86(0xc0);   /* dummy to change bus */
+
+        if (getCx86(CX86_CCR3) == ccr3) {       /* no DEVID regs. */
+                ccr2 = getCx86(CX86_CCR2);
+                setCx86(CX86_CCR2, ccr2 ^ 0x04);
+                getCx86(0xc0);  /* dummy */
+
+                if (getCx86(CX86_CCR2) == ccr2) /* old Cx486SLC/DLC */
+                        *dir0 = 0xfd;
+                else {                          /* Cx486S A step */
+                        setCx86(CX86_CCR2, ccr2);
+                        *dir0 = 0xfe;
+                }
+        }
+        else {
+                setCx86(CX86_CCR3, ccr3);  /* restore CCR3 */
+
+                /* read DIR0 and DIR1 CPU registers */
+                *dir0 = getCx86(CX86_DIR0);
+                *dir1 = getCx86(CX86_DIR1);
+        }
+        local_irq_restore(flags);
+}
+
+/*
+ * Cx86_dir0_msb is a HACK needed by check_cx686_cpuid/slop in bugs.h in
+ * order to identify the Cyrix CPU model after we're out of setup.c
+ *
+ * Actually since bugs.h doesn't even reference this perhaps someone should
+ * fix the documentation ???
+ */
+static unsigned char Cx86_dir0_msb __initdata = 0;
+
+static char Cx86_model[][9] __initdata = {
+        "Cx486", "Cx486", "5x86 ", "6x86", "MediaGX ", "6x86MX ",
+        "M II ", "Unknown"
+};
+static char Cx486_name[][5] __initdata = {
+        "SLC", "DLC", "SLC2", "DLC2", "SRx", "DRx",
+        "SRx2", "DRx2"
+};
+static char Cx486S_name[][4] __initdata = {
+        "S", "S2", "Se", "S2e"
+};
+static char Cx486D_name[][4] __initdata = {
+        "DX", "DX2", "?", "?", "?", "DX4"
+};
+static char Cx86_cb[] __initdata = "?.5x Core/Bus Clock";
+static char cyrix_model_mult1[] __initdata = "12??43";
+static char cyrix_model_mult2[] __initdata = "12233445";
+
+/*
+ * Reset the slow-loop (SLOP) bit on the 686(L) which is set by some old
+ * BIOSes for compatibility with DOS games.  This makes the udelay loop
+ * work correctly, and improves performance.
+ *
+ * FIXME: our newer udelay uses the tsc. We don't need to frob with SLOP
+ */
+
+extern void calibrate_delay(void) __init;
+
+static void __init check_cx686_slop(struct cpuinfo_x86 *c)
+{
+        unsigned long flags;
+        
+        if (Cx86_dir0_msb == 3) {
+                unsigned char ccr3, ccr5;
+
+                local_irq_save(flags);
+                ccr3 = getCx86(CX86_CCR3);
+                setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN  */
+                ccr5 = getCx86(CX86_CCR5);
+                if (ccr5 & 2)
+                        setCx86(CX86_CCR5, ccr5 & 0xfd);  /* reset SLOP */
+                setCx86(CX86_CCR3, ccr3);                 /* disable MAPEN */
+                local_irq_restore(flags);
+
+                if (ccr5 & 2) { /* possible wrong calibration done */
+                        printk(KERN_INFO "Recalibrating delay loop with SLOP bit reset\n");
+                        calibrate_delay();
+                        c->loops_per_jiffy = loops_per_jiffy;
+                }
+        }
+}
+
+
+static void __init set_cx86_reorder(void)
+{
+        u8 ccr3;
+
+        printk(KERN_INFO "Enable Memory access reorder on Cyrix/NSC processor.\n");
+        ccr3 = getCx86(CX86_CCR3);
+        setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN  */
+
+        /* Load/Store Serialize to mem access disable (=reorder it)  */
+        setCx86(CX86_PCR0, getCx86(CX86_PCR0) & ~0x80);
+        /* set load/store serialize from 1GB to 4GB */
+        ccr3 |= 0xe0;
+        setCx86(CX86_CCR3, ccr3);
+}
+
+static void __init set_cx86_memwb(void)
+{
+        u32 cr0;
+
+        printk(KERN_INFO "Enable Memory-Write-back mode on Cyrix/NSC processor.\n");
+
+        /* CCR2 bit 2: unlock NW bit */
+        setCx86(CX86_CCR2, getCx86(CX86_CCR2) & ~0x04);
+        /* set 'Not Write-through' */
+        cr0 = 0x20000000;
+        __asm__("movl %%cr0,%%eax\n\t"
+                "orl %0,%%eax\n\t"
+                "movl %%eax,%%cr0\n"
+                : : "r" (cr0)
+                :"ax");
+        /* CCR2 bit 2: lock NW bit and set WT1 */
+        setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14 );
+}
+
+static void __init set_cx86_inc(void)
+{
+        unsigned char ccr3;
+
+        printk(KERN_INFO "Enable Incrementor on Cyrix/NSC processor.\n");
+
+        ccr3 = getCx86(CX86_CCR3);
+        setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN  */
+        /* PCR1 -- Performance Control */
+        /* Incrementor on, whatever that is */
+        setCx86(CX86_PCR1, getCx86(CX86_PCR1) | 0x02);
+        /* PCR0 -- Performance Control */
+        /* Incrementor Margin 10 */
+        setCx86(CX86_PCR0, getCx86(CX86_PCR0) | 0x04); 
+        setCx86(CX86_CCR3, ccr3);       /* disable MAPEN */
+}
+
+/*
+ *      Configure later MediaGX and/or Geode processor.
+ */
+
+static void __init geode_configure(void)
+{
+        unsigned long flags;
+        u8 ccr3, ccr4;
+        local_irq_save(flags);
+
+        /* Suspend on halt power saving and enable #SUSP pin */
+        setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
+
+        ccr3 = getCx86(CX86_CCR3);
+        setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);       /* Enable */
+        
+        ccr4 = getCx86(CX86_CCR4);
+        ccr4 |= 0x38;           /* FPU fast, DTE cache, Mem bypass */
+        
+        setCx86(CX86_CCR3, ccr3);
+        
+        set_cx86_memwb();
+        set_cx86_reorder();     
+        set_cx86_inc();
+        
+        local_irq_restore(flags);
+}
+
+
+#ifdef CONFIG_PCI
+static struct pci_device_id cyrix_55x0[] = {
+        { PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510) },
+        { PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520) },
+        { },
+};
+#endif
+
+static void __init init_cyrix(struct cpuinfo_x86 *c)
+{
+        unsigned char dir0, dir0_msn, dir0_lsn, dir1 = 0;
+        char *buf = c->x86_model_id;
+        const char *p = NULL;
+
+        /* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
+           3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
+        clear_bit(0*32+31, c->x86_capability);
+
+        /* Cyrix used bit 24 in extended (AMD) CPUID for Cyrix MMX extensions */
+        if ( test_bit(1*32+24, c->x86_capability) ) {
+                clear_bit(1*32+24, c->x86_capability);
+                set_bit(X86_FEATURE_CXMMX, c->x86_capability);
+        }
+
+        do_cyrix_devid(&dir0, &dir1);
+
+        check_cx686_slop(c);
+
+        Cx86_dir0_msb = dir0_msn = dir0 >> 4; /* identifies CPU "family"   */
+        dir0_lsn = dir0 & 0xf;                /* model or clock multiplier */
+
+        /* common case step number/rev -- exceptions handled below */
+        c->x86_model = (dir1 >> 4) + 1;
+        c->x86_mask = dir1 & 0xf;
+
+        /* Now cook; the original recipe is by Channing Corn, from Cyrix.
+         * We do the same thing for each generation: we work out
+         * the model, multiplier and stepping.  Black magic included,
+         * to make the silicon step/rev numbers match the printed ones.
+         */
+         
+        switch (dir0_msn) {
+                unsigned char tmp;
+
+        case 0: /* Cx486SLC/DLC/SRx/DRx */
+                p = Cx486_name[dir0_lsn & 7];
+                break;
+
+        case 1: /* Cx486S/DX/DX2/DX4 */
+                p = (dir0_lsn & 8) ? Cx486D_name[dir0_lsn & 5]
+                        : Cx486S_name[dir0_lsn & 3];
+                break;
+
+        case 2: /* 5x86 */
+                Cx86_cb[2] = cyrix_model_mult1[dir0_lsn & 5];
+                p = Cx86_cb+2;
+                break;
+
+        case 3: /* 6x86/6x86L */
+                Cx86_cb[1] = ' ';
+                Cx86_cb[2] = cyrix_model_mult1[dir0_lsn & 5];
+                if (dir1 > 0x21) { /* 686L */
+                        Cx86_cb[0] = 'L';
+                        p = Cx86_cb;
+                        (c->x86_model)++;
+                } else             /* 686 */
+                        p = Cx86_cb+1;
+                /* Emulate MTRRs using Cyrix's ARRs. */
+                set_bit(X86_FEATURE_CYRIX_ARR, c->x86_capability);
+                /* 6x86's contain this bug */
+                c->coma_bug = 1;
+                break;
+
+        case 4: /* MediaGX/GXm or Geode GXM/GXLV/GX1 */
+#ifdef CONFIG_PCI
+                /* It isn't really a PCI quirk directly, but the cure is the
+                   same. The MediaGX has deep magic SMM stuff that handles the
+                   SB emulation. It thows away the fifo on disable_dma() which
+                   is wrong and ruins the audio. 
+
+                   Bug2: VSA1 has a wrap bug so that using maximum sized DMA 
+                   causes bad things. According to NatSemi VSA2 has another
+                   bug to do with 'hlt'. I've not seen any boards using VSA2
+                   and X doesn't seem to support it either so who cares 8).
+                   VSA1 we work around however.
+                */
+
+                printk(KERN_INFO "Working around Cyrix MediaGX virtual DMA bugs.\n");
+                isa_dma_bridge_buggy = 2;
+#endif          
+                c->x86_cache_size=16;   /* Yep 16K integrated cache thats it */
+ 
+                /*
+                 *  The 5510/5520 companion chips have a funky PIT.
+                 */  
+                if (pci_dev_present(cyrix_55x0))
+                        pit_latch_buggy = 1;
+
+                /* GXm supports extended cpuid levels 'ala' AMD */
+                if (c->cpuid_level == 2) {
+                        /* Enable cxMMX extensions (GX1 Datasheet 54) */
+                        setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1);
+                        
+                        /* GXlv/GXm/GX1 */
+                        if((dir1 >= 0x50 && dir1 <= 0x54) || dir1 >= 0x63)
+                                geode_configure();
+                        get_model_name(c);  /* get CPU marketing name */
+                        return;
+                }
+                else {  /* MediaGX */
+                        Cx86_cb[2] = (dir0_lsn & 1) ? '3' : '4';
+                        p = Cx86_cb+2;
+                        c->x86_model = (dir1 & 0x20) ? 1 : 2;
+                }
+                break;
+
+        case 5: /* 6x86MX/M II */
+                if (dir1 > 7)
+                {
+                        dir0_msn++;  /* M II */
+                        /* Enable MMX extensions (App note 108) */
+                        setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1);
+                }
+                else
+                {
+                        c->coma_bug = 1;      /* 6x86MX, it has the bug. */
+                }
+                tmp = (!(dir0_lsn & 7) || dir0_lsn & 1) ? 2 : 0;
+                Cx86_cb[tmp] = cyrix_model_mult2[dir0_lsn & 7];
+                p = Cx86_cb+tmp;
+                if (((dir1 & 0x0f) > 4) || ((dir1 & 0xf0) == 0x20))
+                        (c->x86_model)++;
+                /* Emulate MTRRs using Cyrix's ARRs. */
+                set_bit(X86_FEATURE_CYRIX_ARR, c->x86_capability);
+                break;
+
+        case 0xf:  /* Cyrix 486 without DEVID registers */
+                switch (dir0_lsn) {
+                case 0xd:  /* either a 486SLC or DLC w/o DEVID */
+                        dir0_msn = 0;
+                        p = Cx486_name[(c->hard_math) ? 1 : 0];
+                        break;
+
+                case 0xe:  /* a 486S A step */
+                        dir0_msn = 0;
+                        p = Cx486S_name[0];
+                        break;
+                }
+                break;
+
+        default:  /* unknown (shouldn't happen, we know everyone ;-) */
+                dir0_msn = 7;
+                break;
+        }
+        strcpy(buf, Cx86_model[dir0_msn & 7]);
+        if (p) strcat(buf, p);
+        return;
+}
+
+/*
+ * Cyrix CPUs without cpuid or with cpuid not yet enabled can be detected
+ * by the fact that they preserve the flags across the division of 5/2.
+ * PII and PPro exhibit this behavior too, but they have cpuid available.
+ */
+ 
+/*
+ * Perform the Cyrix 5/2 test. A Cyrix won't change
+ * the flags, while other 486 chips will.
+ */
+static inline int test_cyrix_52div(void)
+{
+        unsigned int test;
+
+        __asm__ __volatile__(
+             "sahf\n\t"         /* clear flags (%eax = 0x0005) */
+             "div %b2\n\t"      /* divide 5 by 2 */
+             "lahf"             /* store flags into %ah */
+             : "=a" (test)
+             : "0" (5), "q" (2)
+             : "cc");
+
+        /* AH is 0x02 on Cyrix after the divide.. */
+        return (unsigned char) (test >> 8) == 0x02;
+}
+
+static void cyrix_identify(struct cpuinfo_x86 * c)
+{
+        /* Detect Cyrix with disabled CPUID */
+        if ( c->x86 == 4 && test_cyrix_52div() ) {
+                unsigned char dir0, dir1;
+                
+                strcpy(c->x86_vendor_id, "CyrixInstead");
+                c->x86_vendor = X86_VENDOR_CYRIX;
+                
+                /* Actually enable cpuid on the older cyrix */
+            
+                /* Retrieve CPU revisions */
+                
+                do_cyrix_devid(&dir0, &dir1);
+
+                dir0>>=4;               
+                
+                /* Check it is an affected model */
+                
+                if (dir0 == 5 || dir0 == 3)
+                {
+                        unsigned char ccr3, ccr4;
+                        unsigned long flags;
+                        printk(KERN_INFO "Enabling CPUID on Cyrix processor.\n");
+                        local_irq_save(flags);
+                        ccr3 = getCx86(CX86_CCR3);
+                        setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN  */
+                        ccr4 = getCx86(CX86_CCR4);
+                        setCx86(CX86_CCR4, ccr4 | 0x80);          /* enable cpuid  */
+                        setCx86(CX86_CCR3, ccr3);                 /* disable MAPEN */
+                        local_irq_restore(flags);
+                }
+        }
+        generic_identify(c);
+}
+
+static struct cpu_dev cyrix_cpu_dev __initdata = {
+        .c_vendor       = "Cyrix",
+        .c_ident        = { "CyrixInstead" },
+        .c_init         = init_cyrix,
+        .c_identify     = cyrix_identify,
+};
+
+int __init cyrix_init_cpu(void)
+{
+        cpu_devs[X86_VENDOR_CYRIX] = &cyrix_cpu_dev;
+        return 0;
+}
+
+//early_arch_initcall(cyrix_init_cpu);
+
+static struct cpu_dev nsc_cpu_dev __initdata = {
+        .c_vendor       = "NSC",
+        .c_ident        = { "Geode by NSC" },
+        .c_init         = init_cyrix,
+        .c_identify     = generic_identify,
+};
+
+int __init nsc_init_cpu(void)
+{
+        cpu_devs[X86_VENDOR_NSC] = &nsc_cpu_dev;
+        return 0;
+}
+
+//early_arch_initcall(nsc_init_cpu);
diff --git a/arch/i386/kernel/cpu/intel.c b/arch/i386/kernel/cpu/intel.c
new file mode 100644
index 000000000000..b8d847b850dc
--- /dev/null
+++ b/arch/i386/kernel/cpu/intel.c
@@ -0,0 +1,248 @@
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <linux/string.h>
+#include <linux/bitops.h>
+#include <linux/smp.h>
+#include <linux/thread_info.h>
+
+#include <asm/processor.h>
+#include <asm/msr.h>
+#include <asm/uaccess.h>
+
+#include "cpu.h"
+
+#ifdef CONFIG_X86_LOCAL_APIC
+#include <asm/mpspec.h>
+#include <asm/apic.h>
+#include <mach_apic.h>
+#endif
+
+extern int trap_init_f00f_bug(void);
+
+#ifdef CONFIG_X86_INTEL_USERCOPY
+/*
+ * Alignment at which movsl is preferred for bulk memory copies.
+ */
+struct movsl_mask movsl_mask;
+#endif
+
+void __init early_intel_workaround(struct cpuinfo_x86 *c)
+{
+        if (c->x86_vendor != X86_VENDOR_INTEL)
+                return;
+        /* Netburst reports 64 bytes clflush size, but does IO in 128 bytes */
+        if (c->x86 == 15 && c->x86_cache_alignment == 64)
+                c->x86_cache_alignment = 128;
+}
+
+/*
+ *      Early probe support logic for ppro memory erratum #50
+ *
+ *      This is called before we do cpu ident work
+ */
+ 
+int __init ppro_with_ram_bug(void)
+{
+        /* Uses data from early_cpu_detect now */
+        if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
+            boot_cpu_data.x86 == 6 &&
+            boot_cpu_data.x86_model == 1 &&
+            boot_cpu_data.x86_mask < 8) {
+                printk(KERN_INFO "Pentium Pro with Errata#50 detected. Taking evasive action.\n");
+                return 1;
+        }
+        return 0;
+}
+        
+
+/*
+ * P4 Xeon errata 037 workaround.
+ * Hardware prefetcher may cause stale data to be loaded into the cache.
+ */
+static void __init Intel_errata_workarounds(struct cpuinfo_x86 *c)
+{
+        unsigned long lo, hi;
+
+        if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_mask == 1)) {
+                rdmsr (MSR_IA32_MISC_ENABLE, lo, hi);
+                if ((lo & (1<<9)) == 0) {
+                        printk (KERN_INFO "CPU: C0 stepping P4 Xeon detected.\n");
+                        printk (KERN_INFO "CPU: Disabling hardware prefetching (Errata 037)\n");
+                        lo |= (1<<9);   /* Disable hw prefetching */
+                        wrmsr (MSR_IA32_MISC_ENABLE, lo, hi);
+                }
+        }
+}
+
+
+static void __init init_intel(struct cpuinfo_x86 *c)
+{
+        unsigned int l2 = 0;
+        char *p = NULL;
+
+#ifdef CONFIG_X86_F00F_BUG
+        /*
+         * All current models of Pentium and Pentium with MMX technology CPUs
+         * have the F0 0F bug, which lets nonprivileged users lock up the system.
+         * Note that the workaround only should be initialized once...
+         */
+        c->f00f_bug = 0;
+        if ( c->x86 == 5 ) {
+                static int f00f_workaround_enabled = 0;
+
+                c->f00f_bug = 1;
+                if ( !f00f_workaround_enabled ) {
+                        trap_init_f00f_bug();
+                        printk(KERN_NOTICE "Intel Pentium with F0 0F bug - workaround enabled.\n");
+                        f00f_workaround_enabled = 1;
+                }
+        }
+#endif
+
+        select_idle_routine(c);
+        l2 = init_intel_cacheinfo(c);
+
+        /* SEP CPUID bug: Pentium Pro reports SEP but doesn't have it until model 3 mask 3 */
+        if ((c->x86<<8 | c->x86_model<<4 | c->x86_mask) < 0x633)
+                clear_bit(X86_FEATURE_SEP, c->x86_capability);
+
+        /* Names for the Pentium II/Celeron processors 
+           detectable only by also checking the cache size.
+           Dixon is NOT a Celeron. */
+        if (c->x86 == 6) {
+                switch (c->x86_model) {
+                case 5:
+                        if (c->x86_mask == 0) {
+                                if (l2 == 0)
+                                        p = "Celeron (Covington)";
+                                else if (l2 == 256)
+                                        p = "Mobile Pentium II (Dixon)";
+                        }
+                        break;
+                        
+                case 6:
+                        if (l2 == 128)
+                                p = "Celeron (Mendocino)";
+                        else if (c->x86_mask == 0 || c->x86_mask == 5)
+                                p = "Celeron-A";
+                        break;
+                        
+                case 8:
+                        if (l2 == 128)
+                                p = "Celeron (Coppermine)";
+                        break;
+                }
+        }
+
+        if ( p )
+                strcpy(c->x86_model_id, p);
+        
+        detect_ht(c);
+
+        /* Work around errata */
+        Intel_errata_workarounds(c);
+
+#ifdef CONFIG_X86_INTEL_USERCOPY
+        /*
+         * Set up the preferred alignment for movsl bulk memory moves
+         */
+        switch (c->x86) {
+        case 4:         /* 486: untested */
+                break;
+        case 5:         /* Old Pentia: untested */
+                break;
+        case 6:         /* PII/PIII only like movsl with 8-byte alignment */
+                movsl_mask.mask = 7;
+                break;
+        case 15:        /* P4 is OK down to 8-byte alignment */
+                movsl_mask.mask = 7;
+                break;
+        }
+#endif
+
+        if (c->x86 == 15) 
+                set_bit(X86_FEATURE_P4, c->x86_capability);
+        if (c->x86 == 6) 
+                set_bit(X86_FEATURE_P3, c->x86_capability);
+}
+
+
+static unsigned int intel_size_cache(struct cpuinfo_x86 * c, unsigned int size)
+{
+        /* Intel PIII Tualatin. This comes in two flavours.
+         * One has 256kb of cache, the other 512. We have no way
+         * to determine which, so we use a boottime override
+         * for the 512kb model, and assume 256 otherwise.
+         */
+        if ((c->x86 == 6) && (c->x86_model == 11) && (size == 0))
+                size = 256;
+        return size;
+}
+
+static struct cpu_dev intel_cpu_dev __initdata = {
+        .c_vendor       = "Intel",
+        .c_ident        = { "GenuineIntel" },
+        .c_models = {
+                { .vendor = X86_VENDOR_INTEL, .family = 4, .model_names = 
+                  { 
+                          [0] = "486 DX-25/33", 
+                          [1] = "486 DX-50", 
+                          [2] = "486 SX", 
+                          [3] = "486 DX/2", 
+                          [4] = "486 SL", 
+                          [5] = "486 SX/2", 
+                          [7] = "486 DX/2-WB", 
+                          [8] = "486 DX/4", 
+                          [9] = "486 DX/4-WB"
+                  }
+                },
+                { .vendor = X86_VENDOR_INTEL, .family = 5, .model_names =
+                  { 
+                          [0] = "Pentium 60/66 A-step", 
+                          [1] = "Pentium 60/66", 
+                          [2] = "Pentium 75 - 200",
+                          [3] = "OverDrive PODP5V83", 
+                          [4] = "Pentium MMX",
+                          [7] = "Mobile Pentium 75 - 200", 
+                          [8] = "Mobile Pentium MMX"
+                  }
+                },
+                { .vendor = X86_VENDOR_INTEL, .family = 6, .model_names =
+                  { 
+                          [0] = "Pentium Pro A-step",
+                          [1] = "Pentium Pro", 
+                          [3] = "Pentium II (Klamath)", 
+                          [4] = "Pentium II (Deschutes)", 
+                          [5] = "Pentium II (Deschutes)", 
+                          [6] = "Mobile Pentium II",
+                          [7] = "Pentium III (Katmai)", 
+                          [8] = "Pentium III (Coppermine)", 
+                          [10] = "Pentium III (Cascades)",
+                          [11] = "Pentium III (Tualatin)",
+                  }
+                },
+                { .vendor = X86_VENDOR_INTEL, .family = 15, .model_names =
+                  {
+                          [0] = "Pentium 4 (Unknown)",
+                          [1] = "Pentium 4 (Willamette)",
+                          [2] = "Pentium 4 (Northwood)",
+                          [4] = "Pentium 4 (Foster)",
+                          [5] = "Pentium 4 (Foster)",
+                  }
+                },
+        },
+        .c_init         = init_intel,
+        .c_identify     = generic_identify,
+        .c_size_cache   = intel_size_cache,
+};
+
+__init int intel_cpu_init(void)
+{
+        cpu_devs[X86_VENDOR_INTEL] = &intel_cpu_dev;
+        return 0;
+}
+
+// arch_initcall(intel_cpu_init);
+
diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c
new file mode 100644
index 000000000000..aeb5b4ef8c8b
--- /dev/null
+++ b/arch/i386/kernel/cpu/intel_cacheinfo.c
@@ -0,0 +1,598 @@
+/*
+ *      Routines to indentify caches on Intel CPU.
+ *
+ *      Changes:
+ *      Venkatesh Pallipadi     : Adding cache identification through cpuid(4)
+ */
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/compiler.h>
+#include <linux/cpu.h>
+
+#include <asm/processor.h>
+#include <asm/smp.h>
+
+#define LVL_1_INST      1
+#define LVL_1_DATA      2
+#define LVL_2           3
+#define LVL_3           4
+#define LVL_TRACE       5
+
+struct _cache_table
+{
+        unsigned char descriptor;
+        char cache_type;
+        short size;
+};
+
+/* all the cache descriptor types we care about (no TLB or trace cache entries) */
+static struct _cache_table cache_table[] __initdata =
+{
+        { 0x06, LVL_1_INST, 8 },        /* 4-way set assoc, 32 byte line size */
+        { 0x08, LVL_1_INST, 16 },       /* 4-way set assoc, 32 byte line size */
+        { 0x0a, LVL_1_DATA, 8 },        /* 2 way set assoc, 32 byte line size */
+        { 0x0c, LVL_1_DATA, 16 },       /* 4-way set assoc, 32 byte line size */
+        { 0x22, LVL_3,      512 },      /* 4-way set assoc, sectored cache, 64 byte line size */
+        { 0x23, LVL_3,      1024 },     /* 8-way set assoc, sectored cache, 64 byte line size */
+        { 0x25, LVL_3,      2048 },     /* 8-way set assoc, sectored cache, 64 byte line size */
+        { 0x29, LVL_3,      4096 },     /* 8-way set assoc, sectored cache, 64 byte line size */
+        { 0x2c, LVL_1_DATA, 32 },       /* 8-way set assoc, 64 byte line size */
+        { 0x30, LVL_1_INST, 32 },       /* 8-way set assoc, 64 byte line size */
+        { 0x39, LVL_2,      128 },      /* 4-way set assoc, sectored cache, 64 byte line size */
+        { 0x3b, LVL_2,      128 },      /* 2-way set assoc, sectored cache, 64 byte line size */
+        { 0x3c, LVL_2,      256 },      /* 4-way set assoc, sectored cache, 64 byte line size */
+        { 0x41, LVL_2,      128 },      /* 4-way set assoc, 32 byte line size */
+        { 0x42, LVL_2,      256 },      /* 4-way set assoc, 32 byte line size */
+        { 0x43, LVL_2,      512 },      /* 4-way set assoc, 32 byte line size */
+        { 0x44, LVL_2,      1024 },     /* 4-way set assoc, 32 byte line size */
+        { 0x45, LVL_2,      2048 },     /* 4-way set assoc, 32 byte line size */
+        { 0x60, LVL_1_DATA, 16 },       /* 8-way set assoc, sectored cache, 64 byte line size */
+        { 0x66, LVL_1_DATA, 8 },        /* 4-way set assoc, sectored cache, 64 byte line size */
+        { 0x67, LVL_1_DATA, 16 },       /* 4-way set assoc, sectored cache, 64 byte line size */
+        { 0x68, LVL_1_DATA, 32 },       /* 4-way set assoc, sectored cache, 64 byte line size */
+        { 0x70, LVL_TRACE,  12 },       /* 8-way set assoc */
+        { 0x71, LVL_TRACE,  16 },       /* 8-way set assoc */
+        { 0x72, LVL_TRACE,  32 },       /* 8-way set assoc */
+        { 0x78, LVL_2,    1024 },       /* 4-way set assoc, 64 byte line size */
+        { 0x79, LVL_2,     128 },       /* 8-way set assoc, sectored cache, 64 byte line size */
+        { 0x7a, LVL_2,     256 },       /* 8-way set assoc, sectored cache, 64 byte line size */
+        { 0x7b, LVL_2,     512 },       /* 8-way set assoc, sectored cache, 64 byte line size */
+        { 0x7c, LVL_2,    1024 },       /* 8-way set assoc, sectored cache, 64 byte line size */
+        { 0x7d, LVL_2,    2048 },       /* 8-way set assoc, 64 byte line size */
+        { 0x7f, LVL_2,     512 },       /* 2-way set assoc, 64 byte line size */
+        { 0x82, LVL_2,     256 },       /* 8-way set assoc, 32 byte line size */
+        { 0x83, LVL_2,     512 },       /* 8-way set assoc, 32 byte line size */
+        { 0x84, LVL_2,    1024 },       /* 8-way set assoc, 32 byte line size */
+        { 0x85, LVL_2,    2048 },       /* 8-way set assoc, 32 byte line size */
+        { 0x86, LVL_2,     512 },       /* 4-way set assoc, 64 byte line size */
+        { 0x87, LVL_2,    1024 },       /* 8-way set assoc, 64 byte line size */
+        { 0x00, 0, 0}
+};
+
+
+enum _cache_type
+{
+        CACHE_TYPE_NULL = 0,
+        CACHE_TYPE_DATA = 1,
+        CACHE_TYPE_INST = 2,
+        CACHE_TYPE_UNIFIED = 3
+};
+
+union _cpuid4_leaf_eax {
+        struct {
+                enum _cache_type        type:5;
+                unsigned int            level:3;
+                unsigned int            is_self_initializing:1;
+                unsigned int            is_fully_associative:1;
+                unsigned int            reserved:4;
+                unsigned int            num_threads_sharing:12;
+                unsigned int            num_cores_on_die:6;
+        } split;
+        u32 full;
+};
+
+union _cpuid4_leaf_ebx {
+        struct {
+                unsigned int            coherency_line_size:12;
+                unsigned int            physical_line_partition:10;
+                unsigned int            ways_of_associativity:10;
+        } split;
+        u32 full;
+};
+
+union _cpuid4_leaf_ecx {
+        struct {
+                unsigned int            number_of_sets:32;
+        } split;
+        u32 full;
+};
+
+struct _cpuid4_info {
+        union _cpuid4_leaf_eax eax;
+        union _cpuid4_leaf_ebx ebx;
+        union _cpuid4_leaf_ecx ecx;
+        unsigned long size;
+        cpumask_t shared_cpu_map;
+};
+
+#define MAX_CACHE_LEAVES                4
+static unsigned short __devinitdata     num_cache_leaves;
+
+static int __devinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf)
+{
+        unsigned int            eax, ebx, ecx, edx;
+        union _cpuid4_leaf_eax  cache_eax;
+
+        cpuid_count(4, index, &eax, &ebx, &ecx, &edx);
+        cache_eax.full = eax;
+        if (cache_eax.split.type == CACHE_TYPE_NULL)
+                return -1;
+
+        this_leaf->eax.full = eax;
+        this_leaf->ebx.full = ebx;
+        this_leaf->ecx.full = ecx;
+        this_leaf->size = (this_leaf->ecx.split.number_of_sets + 1) *
+                (this_leaf->ebx.split.coherency_line_size + 1) *
+                (this_leaf->ebx.split.physical_line_partition + 1) *
+                (this_leaf->ebx.split.ways_of_associativity + 1);
+        return 0;
+}
+
+static int __init find_num_cache_leaves(void)
+{
+        unsigned int            eax, ebx, ecx, edx;
+        union _cpuid4_leaf_eax  cache_eax;
+        int                     i;
+        int                     retval;
+
+        retval = MAX_CACHE_LEAVES;
+        /* Do cpuid(4) loop to find out num_cache_leaves */
+        for (i = 0; i < MAX_CACHE_LEAVES; i++) {
+                cpuid_count(4, i, &eax, &ebx, &ecx, &edx);
+                cache_eax.full = eax;
+                if (cache_eax.split.type == CACHE_TYPE_NULL) {
+                        retval = i;
+                        break;
+                }
+        }
+        return retval;
+}
+
+unsigned int __init init_intel_cacheinfo(struct cpuinfo_x86 *c)
+{
+        unsigned int trace = 0, l1i = 0, l1d = 0, l2 = 0, l3 = 0; /* Cache sizes */
+        unsigned int new_l1d = 0, new_l1i = 0; /* Cache sizes from cpuid(4) */
+        unsigned int new_l2 = 0, new_l3 = 0, i; /* Cache sizes from cpuid(4) */
+
+        if (c->cpuid_level > 4) {
+                static int is_initialized;
+
+                if (is_initialized == 0) {
+                        /* Init num_cache_leaves from boot CPU */
+                        num_cache_leaves = find_num_cache_leaves();
+                        is_initialized++;
+                }
+
+                /*
+                 * Whenever possible use cpuid(4), deterministic cache
+                 * parameters cpuid leaf to find the cache details
+                 */
+                for (i = 0; i < num_cache_leaves; i++) {
+                        struct _cpuid4_info this_leaf;
+
+                        int retval;
+
+                        retval = cpuid4_cache_lookup(i, &this_leaf);
+                        if (retval >= 0) {
+                                switch(this_leaf.eax.split.level) {
+                                    case 1:
+                                        if (this_leaf.eax.split.type ==
+                                                        CACHE_TYPE_DATA)
+                                                new_l1d = this_leaf.size/1024;
+                                        else if (this_leaf.eax.split.type ==
+                                                        CACHE_TYPE_INST)
+                                                new_l1i = this_leaf.size/1024;
+                                        break;
+                                    case 2:
+                                        new_l2 = this_leaf.size/1024;
+                                        break;
+                                    case 3:
+                                        new_l3 = this_leaf.size/1024;
+                                        break;
+                                    default:
+                                        break;
+                                }
+                        }
+                }
+        }
+        if (c->cpuid_level > 1) {
+                /* supports eax=2  call */
+                int i, j, n;
+                int regs[4];
+                unsigned char *dp = (unsigned char *)regs;
+
+                /* Number of times to iterate */
+                n = cpuid_eax(2) & 0xFF;
+
+                for ( i = 0 ; i < n ; i++ ) {
+                        cpuid(2, &regs[0], &regs[1], &regs[2], &regs[3]);
+
+                        /* If bit 31 is set, this is an unknown format */
+                        for ( j = 0 ; j < 3 ; j++ ) {
+                                if ( regs[j] < 0 ) regs[j] = 0;
+                        }
+
+                        /* Byte 0 is level count, not a descriptor */
+                        for ( j = 1 ; j < 16 ; j++ ) {
+                                unsigned char des = dp[j];
+                                unsigned char k = 0;
+
+                                /* look up this descriptor in the table */
+                                while (cache_table[k].descriptor != 0)
+                                {
+                                        if (cache_table[k].descriptor == des) {
+                                                switch (cache_table[k].cache_type) {
+                                                case LVL_1_INST:
+                                                        l1i += cache_table[k].size;
+                                                        break;
+                                                case LVL_1_DATA:
+                                                        l1d += cache_table[k].size;
+                                                        break;
+                                                case LVL_2:
+                                                        l2 += cache_table[k].size;
+                                                        break;
+                                                case LVL_3:
+                                                        l3 += cache_table[k].size;
+                                                        break;
+                                                case LVL_TRACE:
+                                                        trace += cache_table[k].size;
+                                                        break;
+                                                }
+
+                                                break;
+                                        }
+
+                                        k++;
+                                }
+                        }
+                }
+
+                if (new_l1d)
+                        l1d = new_l1d;
+
+                if (new_l1i)
+                        l1i = new_l1i;
+
+                if (new_l2)
+                        l2 = new_l2;
+
+                if (new_l3)
+                        l3 = new_l3;
+
+                if ( trace )
+                        printk (KERN_INFO "CPU: Trace cache: %dK uops", trace);
+                else if ( l1i )
+                        printk (KERN_INFO "CPU: L1 I cache: %dK", l1i);
+                if ( l1d )
+                        printk(", L1 D cache: %dK\n", l1d);
+                else
+                        printk("\n");
+                if ( l2 )
+                        printk(KERN_INFO "CPU: L2 cache: %dK\n", l2);
+                if ( l3 )
+                        printk(KERN_INFO "CPU: L3 cache: %dK\n", l3);
+
+                /*
+                 * This assumes the L3 cache is shared; it typically lives in
+                 * the northbridge.  The L1 caches are included by the L2
+                 * cache, and so should not be included for the purpose of
+                 * SMP switching weights.
+                 */
+                c->x86_cache_size = l2 ? l2 : (l1i+l1d);
+        }
+
+        return l2;
+}
+
+/* pointer to _cpuid4_info array (for each cache leaf) */
+static struct _cpuid4_info *cpuid4_info[NR_CPUS];
+#define CPUID4_INFO_IDX(x,y)    (&((cpuid4_info[x])[y]))
+
+#ifdef CONFIG_SMP
+static void __devinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
+{
+        struct _cpuid4_info     *this_leaf;
+        unsigned long num_threads_sharing;
+
+        this_leaf = CPUID4_INFO_IDX(cpu, index);
+        num_threads_sharing = 1 + this_leaf->eax.split.num_threads_sharing;
+
+        if (num_threads_sharing == 1)
+                cpu_set(cpu, this_leaf->shared_cpu_map);
+#ifdef CONFIG_X86_HT
+        else if (num_threads_sharing == smp_num_siblings)
+                this_leaf->shared_cpu_map = cpu_sibling_map[cpu];
+#endif
+        else
+                printk(KERN_INFO "Number of CPUs sharing cache didn't match "
+                                "any known set of CPUs\n");
+}
+#else
+static void __init cache_shared_cpu_map_setup(unsigned int cpu, int index) {}
+#endif
+
+static void free_cache_attributes(unsigned int cpu)
+{
+        kfree(cpuid4_info[cpu]);
+        cpuid4_info[cpu] = NULL;
+}
+
+static int __devinit detect_cache_attributes(unsigned int cpu)
+{
+        struct _cpuid4_info     *this_leaf;
+        unsigned long           j;
+        int                     retval;
+
+        if (num_cache_leaves == 0)
+                return -ENOENT;
+
+        cpuid4_info[cpu] = kmalloc(
+            sizeof(struct _cpuid4_info) * num_cache_leaves, GFP_KERNEL);
+        if (unlikely(cpuid4_info[cpu] == NULL))
+                return -ENOMEM;
+        memset(cpuid4_info[cpu], 0,
+            sizeof(struct _cpuid4_info) * num_cache_leaves);
+
+        /* Do cpuid and store the results */
+        for (j = 0; j < num_cache_leaves; j++) {
+                this_leaf = CPUID4_INFO_IDX(cpu, j);
+                retval = cpuid4_cache_lookup(j, this_leaf);
+                if (unlikely(retval < 0))
+                        goto err_out;
+                cache_shared_cpu_map_setup(cpu, j);
+        }
+        return 0;
+
+err_out:
+        free_cache_attributes(cpu);
+        return -ENOMEM;
+}
+
+#ifdef CONFIG_SYSFS
+
+#include <linux/kobject.h>
+#include <linux/sysfs.h>
+
+extern struct sysdev_class cpu_sysdev_class; /* from drivers/base/cpu.c */
+
+/* pointer to kobject for cpuX/cache */
+static struct kobject * cache_kobject[NR_CPUS];
+
+struct _index_kobject {
+        struct kobject kobj;
+        unsigned int cpu;
+        unsigned short index;
+};
+
+/* pointer to array of kobjects for cpuX/cache/indexY */
+static struct _index_kobject *index_kobject[NR_CPUS];
+#define INDEX_KOBJECT_PTR(x,y)    (&((index_kobject[x])[y]))
+
+#define show_one_plus(file_name, object, val)                           \
+static ssize_t show_##file_name                                         \
+                        (struct _cpuid4_info *this_leaf, char *buf)     \
+{                                                                       \
+        return sprintf (buf, "%lu\n", (unsigned long)this_leaf->object + val); \
+}
+
+show_one_plus(level, eax.split.level, 0);
+show_one_plus(coherency_line_size, ebx.split.coherency_line_size, 1);
+show_one_plus(physical_line_partition, ebx.split.physical_line_partition, 1);
+show_one_plus(ways_of_associativity, ebx.split.ways_of_associativity, 1);
+show_one_plus(number_of_sets, ecx.split.number_of_sets, 1);
+
+static ssize_t show_size(struct _cpuid4_info *this_leaf, char *buf)
+{
+        return sprintf (buf, "%luK\n", this_leaf->size / 1024);
+}
+
+static ssize_t show_shared_cpu_map(struct _cpuid4_info *this_leaf, char *buf)
+{
+        char mask_str[NR_CPUS];
+        cpumask_scnprintf(mask_str, NR_CPUS, this_leaf->shared_cpu_map);
+        return sprintf(buf, "%s\n", mask_str);
+}
+
+static ssize_t show_type(struct _cpuid4_info *this_leaf, char *buf) {
+        switch(this_leaf->eax.split.type) {
+            case CACHE_TYPE_DATA:
+                return sprintf(buf, "Data\n");
+                break;
+            case CACHE_TYPE_INST:
+                return sprintf(buf, "Instruction\n");
+                break;
+            case CACHE_TYPE_UNIFIED:
+                return sprintf(buf, "Unified\n");
+                break;
+            default:
+                return sprintf(buf, "Unknown\n");
+                break;
+        }
+}
+
+struct _cache_attr {
+        struct attribute attr;
+        ssize_t (*show)(struct _cpuid4_info *, char *);
+        ssize_t (*store)(struct _cpuid4_info *, const char *, size_t count);
+};
+
+#define define_one_ro(_name) \
+static struct _cache_attr _name = \
+        __ATTR(_name, 0444, show_##_name, NULL)
+
+define_one_ro(level);
+define_one_ro(type);
+define_one_ro(coherency_line_size);
+define_one_ro(physical_line_partition);
+define_one_ro(ways_of_associativity);
+define_one_ro(number_of_sets);
+define_one_ro(size);
+define_one_ro(shared_cpu_map);
+
+static struct attribute * default_attrs[] = {
+        &type.attr,
+        &level.attr,
+        &coherency_line_size.attr,
+        &physical_line_partition.attr,
+        &ways_of_associativity.attr,
+        &number_of_sets.attr,
+        &size.attr,
+        &shared_cpu_map.attr,
+        NULL
+};
+
+#define to_object(k) container_of(k, struct _index_kobject, kobj)
+#define to_attr(a) container_of(a, struct _cache_attr, attr)
+
+static ssize_t show(struct kobject * kobj, struct attribute * attr, char * buf)
+{
+        struct _cache_attr *fattr = to_attr(attr);
+        struct _index_kobject *this_leaf = to_object(kobj);
+        ssize_t ret;
+
+        ret = fattr->show ?
+                fattr->show(CPUID4_INFO_IDX(this_leaf->cpu, this_leaf->index),
+                        buf) :
+                0;
+        return ret;
+}
+
+static ssize_t store(struct kobject * kobj, struct attribute * attr,
+                     const char * buf, size_t count)
+{
+        return 0;
+}
+
+static struct sysfs_ops sysfs_ops = {
+        .show   = show,
+        .store  = store,
+};
+
+static struct kobj_type ktype_cache = {
+        .sysfs_ops      = &sysfs_ops,
+        .default_attrs  = default_attrs,
+};
+
+static struct kobj_type ktype_percpu_entry = {
+        .sysfs_ops      = &sysfs_ops,
+};
+
+static void cpuid4_cache_sysfs_exit(unsigned int cpu)
+{
+        kfree(cache_kobject[cpu]);
+        kfree(index_kobject[cpu]);
+        cache_kobject[cpu] = NULL;
+        index_kobject[cpu] = NULL;
+        free_cache_attributes(cpu);
+}
+
+static int __devinit cpuid4_cache_sysfs_init(unsigned int cpu)
+{
+
+        if (num_cache_leaves == 0)
+                return -ENOENT;
+
+        detect_cache_attributes(cpu);
+        if (cpuid4_info[cpu] == NULL)
+                return -ENOENT;
+
+        /* Allocate all required memory */
+        cache_kobject[cpu] = kmalloc(sizeof(struct kobject), GFP_KERNEL);
+        if (unlikely(cache_kobject[cpu] == NULL))
+                goto err_out;
+        memset(cache_kobject[cpu], 0, sizeof(struct kobject));
+
+        index_kobject[cpu] = kmalloc(
+            sizeof(struct _index_kobject ) * num_cache_leaves, GFP_KERNEL);
+        if (unlikely(index_kobject[cpu] == NULL))
+                goto err_out;
+        memset(index_kobject[cpu], 0,
+            sizeof(struct _index_kobject) * num_cache_leaves);
+
+        return 0;
+
+err_out:
+        cpuid4_cache_sysfs_exit(cpu);
+        return -ENOMEM;
+}
+
+/* Add/Remove cache interface for CPU device */
+static int __devinit cache_add_dev(struct sys_device * sys_dev)
+{
+        unsigned int cpu = sys_dev->id;
+        unsigned long i, j;
+        struct _index_kobject *this_object;
+        int retval = 0;
+
+        retval = cpuid4_cache_sysfs_init(cpu);
+        if (unlikely(retval < 0))
+                return retval;
+
+        cache_kobject[cpu]->parent = &sys_dev->kobj;
+        kobject_set_name(cache_kobject[cpu], "%s", "cache");
+        cache_kobject[cpu]->ktype = &ktype_percpu_entry;
+        retval = kobject_register(cache_kobject[cpu]);
+
+        for (i = 0; i < num_cache_leaves; i++) {
+                this_object = INDEX_KOBJECT_PTR(cpu,i);
+                this_object->cpu = cpu;
+                this_object->index = i;
+                this_object->kobj.parent = cache_kobject[cpu];
+                kobject_set_name(&(this_object->kobj), "index%1lu", i);
+                this_object->kobj.ktype = &ktype_cache;
+                retval = kobject_register(&(this_object->kobj));
+                if (unlikely(retval)) {
+                        for (j = 0; j < i; j++) {
+                                kobject_unregister(
+                                        &(INDEX_KOBJECT_PTR(cpu,j)->kobj));
+                        }
+                        kobject_unregister(cache_kobject[cpu]);
+                        cpuid4_cache_sysfs_exit(cpu);
+                        break;
+                }
+        }
+        return retval;
+}
+
+static int __devexit cache_remove_dev(struct sys_device * sys_dev)
+{
+        unsigned int cpu = sys_dev->id;
+        unsigned long i;
+
+        for (i = 0; i < num_cache_leaves; i++)
+                kobject_unregister(&(INDEX_KOBJECT_PTR(cpu,i)->kobj));
+        kobject_unregister(cache_kobject[cpu]);
+        cpuid4_cache_sysfs_exit(cpu);
+        return 0;
+}
+
+static struct sysdev_driver cache_sysdev_driver = {
+        .add = cache_add_dev,
+        .remove = __devexit_p(cache_remove_dev),
+};
+
+/* Register/Unregister the cpu_cache driver */
+static int __devinit cache_register_driver(void)
+{
+        if (num_cache_leaves == 0)
+                return 0;
+
+        return sysdev_driver_register(&cpu_sysdev_class,&cache_sysdev_driver);
+}
+
+device_initcall(cache_register_driver);
+
+#endif
+
diff --git a/arch/i386/kernel/cpu/mcheck/Makefile b/arch/i386/kernel/cpu/mcheck/Makefile
new file mode 100644
index 000000000000..30808f3d6715
--- /dev/null
+++ b/arch/i386/kernel/cpu/mcheck/Makefile
@@ -0,0 +1,2 @@
+obj-y   =       mce.o k7.o p4.o p5.o p6.o winchip.o
+obj-$(CONFIG_X86_MCE_NONFATAL)  +=      non-fatal.o
diff --git a/arch/i386/kernel/cpu/mcheck/k7.c b/arch/i386/kernel/cpu/mcheck/k7.c
new file mode 100644
index 000000000000..8df52e86c4d2
--- /dev/null
+++ b/arch/i386/kernel/cpu/mcheck/k7.c
@@ -0,0 +1,97 @@
+/*
+ * Athlon/Hammer specific Machine Check Exception Reporting
+ * (C) Copyright 2002 Dave Jones <davej@codemonkey.org.uk>
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/config.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+
+#include <asm/processor.h> 
+#include <asm/system.h>
+#include <asm/msr.h>
+
+#include "mce.h"
+
+/* Machine Check Handler For AMD Athlon/Duron */
+static fastcall void k7_machine_check(struct pt_regs * regs, long error_code)
+{
+        int recover=1;
+        u32 alow, ahigh, high, low;
+        u32 mcgstl, mcgsth;
+        int i;
+
+        rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
+        if (mcgstl & (1<<0))    /* Recoverable ? */
+                recover=0;
+
+        printk (KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
+                smp_processor_id(), mcgsth, mcgstl);
+
+        for (i=1; i<nr_mce_banks; i++) {
+                rdmsr (MSR_IA32_MC0_STATUS+i*4,low, high);
+                if (high&(1<<31)) {
+                        if (high & (1<<29))
+                                recover |= 1;
+                        if (high & (1<<25))
+                                recover |= 2;
+                        printk (KERN_EMERG "Bank %d: %08x%08x", i, high, low);
+                        high &= ~(1<<31);
+                        if (high & (1<<27)) {
+                                rdmsr (MSR_IA32_MC0_MISC+i*4, alow, ahigh);
+                                printk ("[%08x%08x]", ahigh, alow);
+                        }
+                        if (high & (1<<26)) {
+                                rdmsr (MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
+                                printk (" at %08x%08x", ahigh, alow);
+                        }
+                        printk ("\n");
+                        /* Clear it */
+                        wrmsr (MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
+                        /* Serialize */
+                        wmb();
+                        add_taint(TAINT_MACHINE_CHECK);
+                }
+        }
+
+        if (recover&2)
+                panic ("CPU context corrupt");
+        if (recover&1)
+                panic ("Unable to continue");
+        printk (KERN_EMERG "Attempting to continue.\n");
+        mcgstl &= ~(1<<2);
+        wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth);
+}
+
+
+/* AMD K7 machine check is Intel like */
+void __init amd_mcheck_init(struct cpuinfo_x86 *c)
+{
+        u32 l, h;
+        int i;
+
+        machine_check_vector = k7_machine_check;
+        wmb();
+
+        printk (KERN_INFO "Intel machine check architecture supported.\n");
+        rdmsr (MSR_IA32_MCG_CAP, l, h);
+        if (l & (1<<8)) /* Control register present ? */
+                wrmsr (MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
+        nr_mce_banks = l & 0xff;
+
+        /* Clear status for MC index 0 separately, we don't touch CTL,
+         * as some Athlons cause spurious MCEs when its enabled. */
+        wrmsr (MSR_IA32_MC0_STATUS, 0x0, 0x0);
+        for (i=1; i<nr_mce_banks; i++) {
+                wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
+                wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
+        }
+
+        set_in_cr4 (X86_CR4_MCE);
+        printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
+                smp_processor_id());
+}
diff --git a/arch/i386/kernel/cpu/mcheck/mce.c b/arch/i386/kernel/cpu/mcheck/mce.c
new file mode 100644
index 000000000000..bf6d1aefafc0
--- /dev/null
+++ b/arch/i386/kernel/cpu/mcheck/mce.c
@@ -0,0 +1,77 @@
+/*
+ * mce.c - x86 Machine Check Exception Reporting
+ * (c) 2002 Alan Cox <alan@redhat.com>, Dave Jones <davej@codemonkey.org.uk>
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/smp.h>
+#include <linux/thread_info.h>
+
+#include <asm/processor.h> 
+#include <asm/system.h>
+
+#include "mce.h"
+
+int mce_disabled __initdata = 0;
+int nr_mce_banks;
+
+EXPORT_SYMBOL_GPL(nr_mce_banks);        /* non-fatal.o */
+
+/* Handle unconfigured int18 (should never happen) */
+static fastcall void unexpected_machine_check(struct pt_regs * regs, long error_code)
+{       
+        printk(KERN_ERR "CPU#%d: Unexpected int18 (Machine Check).\n", smp_processor_id());
+}
+
+/* Call the installed machine check handler for this CPU setup. */
+void fastcall (*machine_check_vector)(struct pt_regs *, long error_code) = unexpected_machine_check;
+
+/* This has to be run for each processor */
+void __init mcheck_init(struct cpuinfo_x86 *c)
+{
+        if (mce_disabled==1)
+                return;
+
+        switch (c->x86_vendor) {
+                case X86_VENDOR_AMD:
+                        if (c->x86==6 || c->x86==15)
+                                amd_mcheck_init(c);
+                        break;
+
+                case X86_VENDOR_INTEL:
+                        if (c->x86==5)
+                                intel_p5_mcheck_init(c);
+                        if (c->x86==6)
+                                intel_p6_mcheck_init(c);
+                        if (c->x86==15)
+                                intel_p4_mcheck_init(c);
+                        break;
+
+                case X86_VENDOR_CENTAUR:
+                        if (c->x86==5)
+                                winchip_mcheck_init(c);
+                        break;
+
+                default:
+                        break;
+        }
+}
+
+static int __init mcheck_disable(char *str)
+{
+        mce_disabled = 1;
+        return 0;
+}
+
+static int __init mcheck_enable(char *str)
+{
+        mce_disabled = -1;
+        return 0;
+}
+
+__setup("nomce", mcheck_disable);
+__setup("mce", mcheck_enable);
diff --git a/arch/i386/kernel/cpu/mcheck/mce.h b/arch/i386/kernel/cpu/mcheck/mce.h
new file mode 100644
index 000000000000..dc2416dfef15
--- /dev/null
+++ b/arch/i386/kernel/cpu/mcheck/mce.h
@@ -0,0 +1,14 @@
+#include <linux/init.h>
+
+void amd_mcheck_init(struct cpuinfo_x86 *c);
+void intel_p4_mcheck_init(struct cpuinfo_x86 *c);
+void intel_p5_mcheck_init(struct cpuinfo_x86 *c);
+void intel_p6_mcheck_init(struct cpuinfo_x86 *c);
+void winchip_mcheck_init(struct cpuinfo_x86 *c);
+
+/* Call the installed machine check handler for this CPU setup. */
+extern fastcall void (*machine_check_vector)(struct pt_regs *, long error_code);
+
+extern int mce_disabled __initdata;
+extern int nr_mce_banks;
+
diff --git a/arch/i386/kernel/cpu/mcheck/non-fatal.c b/arch/i386/kernel/cpu/mcheck/non-fatal.c
new file mode 100644
index 000000000000..7864ddfccf07
--- /dev/null
+++ b/arch/i386/kernel/cpu/mcheck/non-fatal.c
@@ -0,0 +1,93 @@
+/*
+ * Non Fatal Machine Check Exception Reporting
+ *
+ * (C) Copyright 2002 Dave Jones. <davej@codemonkey.org.uk>
+ *
+ * This file contains routines to check for non-fatal MCEs every 15s
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/jiffies.h>
+#include <linux/config.h>
+#include <linux/irq.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+#include <linux/module.h>
+
+#include <asm/processor.h> 
+#include <asm/system.h>
+#include <asm/msr.h>
+
+#include "mce.h"
+
+static int firstbank;
+
+#define MCE_RATE        15*HZ   /* timer rate is 15s */
+
+static void mce_checkregs (void *info)
+{
+        u32 low, high;
+        int i;
+
+        for (i=firstbank; i<nr_mce_banks; i++) {
+                rdmsr (MSR_IA32_MC0_STATUS+i*4, low, high);
+
+                if (high & (1<<31)) {
+                        printk(KERN_INFO "MCE: The hardware reports a non "
+                                "fatal, correctable incident occurred on "
+                                "CPU %d.\n",
+                                smp_processor_id());
+                        printk (KERN_INFO "Bank %d: %08x%08x\n", i, high, low);
+
+                        /* Scrub the error so we don't pick it up in MCE_RATE seconds time. */
+                        wrmsr (MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
+
+                        /* Serialize */
+                        wmb();
+                        add_taint(TAINT_MACHINE_CHECK);
+                }
+        }
+}
+
+static void mce_work_fn(void *data);
+static DECLARE_WORK(mce_work, mce_work_fn, NULL);
+
+static void mce_work_fn(void *data)
+{ 
+        on_each_cpu(mce_checkregs, NULL, 1, 1);
+        schedule_delayed_work(&mce_work, MCE_RATE);
+} 
+
+static int __init init_nonfatal_mce_checker(void)
+{
+        struct cpuinfo_x86 *c = &boot_cpu_data;
+
+        /* Check for MCE support */
+        if (!cpu_has(c, X86_FEATURE_MCE))
+                return -ENODEV;
+
+        /* Check for PPro style MCA */
+        if (!cpu_has(c, X86_FEATURE_MCA))
+                return -ENODEV;
+
+        /* Some Athlons misbehave when we frob bank 0 */
+        if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
+                boot_cpu_data.x86 == 6)
+                        firstbank = 1;
+        else
+                        firstbank = 0;
+
+        /*
+         * Check for non-fatal errors every MCE_RATE s
+         */
+        schedule_delayed_work(&mce_work, MCE_RATE);
+        printk(KERN_INFO "Machine check exception polling timer started.\n");
+        return 0;
+}
+module_init(init_nonfatal_mce_checker);
+
+MODULE_LICENSE("GPL");
diff --git a/arch/i386/kernel/cpu/mcheck/p4.c b/arch/i386/kernel/cpu/mcheck/p4.c
new file mode 100644
index 000000000000..8b16ceb929b4
--- /dev/null
+++ b/arch/i386/kernel/cpu/mcheck/p4.c
@@ -0,0 +1,271 @@
+/*
+ * P4 specific Machine Check Exception Reporting
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/config.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+
+#include <asm/processor.h> 
+#include <asm/system.h>
+#include <asm/msr.h>
+#include <asm/apic.h>
+
+#include "mce.h"
+
+/* as supported by the P4/Xeon family */
+struct intel_mce_extended_msrs {
+        u32 eax;
+        u32 ebx;
+        u32 ecx;
+        u32 edx;
+        u32 esi;
+        u32 edi;
+        u32 ebp;
+        u32 esp;
+        u32 eflags;
+        u32 eip;
+        /* u32 *reserved[]; */
+};
+
+static int mce_num_extended_msrs = 0;
+
+
+#ifdef CONFIG_X86_MCE_P4THERMAL
+static void unexpected_thermal_interrupt(struct pt_regs *regs)
+{       
+        printk(KERN_ERR "CPU%d: Unexpected LVT TMR interrupt!\n",
+                        smp_processor_id());
+        add_taint(TAINT_MACHINE_CHECK);
+}
+
+/* P4/Xeon Thermal transition interrupt handler */
+static void intel_thermal_interrupt(struct pt_regs *regs)
+{
+        u32 l, h;
+        unsigned int cpu = smp_processor_id();
+        static unsigned long next[NR_CPUS];
+
+        ack_APIC_irq();
+
+        if (time_after(next[cpu], jiffies))
+                return;
+
+        next[cpu] = jiffies + HZ*5;
+        rdmsr(MSR_IA32_THERM_STATUS, l, h);
+        if (l & 0x1) {
+                printk(KERN_EMERG "CPU%d: Temperature above threshold\n", cpu);
+                printk(KERN_EMERG "CPU%d: Running in modulated clock mode\n",
+                                cpu);
+                add_taint(TAINT_MACHINE_CHECK);
+        } else {
+                printk(KERN_INFO "CPU%d: Temperature/speed normal\n", cpu);
+        }
+}
+
+/* Thermal interrupt handler for this CPU setup */
+static void (*vendor_thermal_interrupt)(struct pt_regs *regs) = unexpected_thermal_interrupt;
+
+fastcall void smp_thermal_interrupt(struct pt_regs *regs)
+{
+        irq_enter();
+        vendor_thermal_interrupt(regs);
+        irq_exit();
+}
+
+/* P4/Xeon Thermal regulation detect and init */
+static void __init intel_init_thermal(struct cpuinfo_x86 *c)
+{
+        u32 l, h;
+        unsigned int cpu = smp_processor_id();
+
+        /* Thermal monitoring */
+        if (!cpu_has(c, X86_FEATURE_ACPI))
+                return; /* -ENODEV */
+
+        /* Clock modulation */
+        if (!cpu_has(c, X86_FEATURE_ACC))
+                return; /* -ENODEV */
+
+        /* first check if its enabled already, in which case there might
+         * be some SMM goo which handles it, so we can't even put a handler
+         * since it might be delivered via SMI already -zwanem.
+         */
+        rdmsr (MSR_IA32_MISC_ENABLE, l, h);
+        h = apic_read(APIC_LVTTHMR);
+        if ((l & (1<<3)) && (h & APIC_DM_SMI)) {
+                printk(KERN_DEBUG "CPU%d: Thermal monitoring handled by SMI\n",
+                                cpu);
+                return; /* -EBUSY */
+        }
+
+        /* check whether a vector already exists, temporarily masked? */        
+        if (h & APIC_VECTOR_MASK) {
+                printk(KERN_DEBUG "CPU%d: Thermal LVT vector (%#x) already "
+                                "installed\n",
+                        cpu, (h & APIC_VECTOR_MASK));
+                return; /* -EBUSY */
+        }
+
+        /* The temperature transition interrupt handler setup */
+        h = THERMAL_APIC_VECTOR;                /* our delivery vector */
+        h |= (APIC_DM_FIXED | APIC_LVT_MASKED); /* we'll mask till we're ready */
+        apic_write_around(APIC_LVTTHMR, h);
+
+        rdmsr (MSR_IA32_THERM_INTERRUPT, l, h);
+        wrmsr (MSR_IA32_THERM_INTERRUPT, l | 0x03 , h);
+
+        /* ok we're good to go... */
+        vendor_thermal_interrupt = intel_thermal_interrupt;
+        
+        rdmsr (MSR_IA32_MISC_ENABLE, l, h);
+        wrmsr (MSR_IA32_MISC_ENABLE, l | (1<<3), h);
+        
+        l = apic_read (APIC_LVTTHMR);
+        apic_write_around (APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
+        printk (KERN_INFO "CPU%d: Thermal monitoring enabled\n", cpu);
+        return;
+}
+#endif /* CONFIG_X86_MCE_P4THERMAL */
+
+
+/* P4/Xeon Extended MCE MSR retrieval, return 0 if unsupported */
+static inline int intel_get_extended_msrs(struct intel_mce_extended_msrs *r)
+{
+        u32 h;
+
+        if (mce_num_extended_msrs == 0)
+                goto done;
+
+        rdmsr (MSR_IA32_MCG_EAX, r->eax, h);
+        rdmsr (MSR_IA32_MCG_EBX, r->ebx, h);
+        rdmsr (MSR_IA32_MCG_ECX, r->ecx, h);
+        rdmsr (MSR_IA32_MCG_EDX, r->edx, h);
+        rdmsr (MSR_IA32_MCG_ESI, r->esi, h);
+        rdmsr (MSR_IA32_MCG_EDI, r->edi, h);
+        rdmsr (MSR_IA32_MCG_EBP, r->ebp, h);
+        rdmsr (MSR_IA32_MCG_ESP, r->esp, h);
+        rdmsr (MSR_IA32_MCG_EFLAGS, r->eflags, h);
+        rdmsr (MSR_IA32_MCG_EIP, r->eip, h);
+
+        /* can we rely on kmalloc to do a dynamic
+         * allocation for the reserved registers?
+         */
+done:
+        return mce_num_extended_msrs;
+}
+
+static fastcall void intel_machine_check(struct pt_regs * regs, long error_code)
+{
+        int recover=1;
+        u32 alow, ahigh, high, low;
+        u32 mcgstl, mcgsth;
+        int i;
+        struct intel_mce_extended_msrs dbg;
+
+        rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
+        if (mcgstl & (1<<0))    /* Recoverable ? */
+                recover=0;
+
+        printk (KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
+                smp_processor_id(), mcgsth, mcgstl);
+
+        if (intel_get_extended_msrs(&dbg)) {
+                printk (KERN_DEBUG "CPU %d: EIP: %08x EFLAGS: %08x\n",
+                        smp_processor_id(), dbg.eip, dbg.eflags);
+                printk (KERN_DEBUG "\teax: %08x ebx: %08x ecx: %08x edx: %08x\n",
+                        dbg.eax, dbg.ebx, dbg.ecx, dbg.edx);
+                printk (KERN_DEBUG "\tesi: %08x edi: %08x ebp: %08x esp: %08x\n",
+                        dbg.esi, dbg.edi, dbg.ebp, dbg.esp);
+        }
+
+        for (i=0; i<nr_mce_banks; i++) {
+                rdmsr (MSR_IA32_MC0_STATUS+i*4,low, high);
+                if (high & (1<<31)) {
+                        if (high & (1<<29))
+                                recover |= 1;
+                        if (high & (1<<25))
+                                recover |= 2;
+                        printk (KERN_EMERG "Bank %d: %08x%08x", i, high, low);
+                        high &= ~(1<<31);
+                        if (high & (1<<27)) {
+                                rdmsr (MSR_IA32_MC0_MISC+i*4, alow, ahigh);
+                                printk ("[%08x%08x]", ahigh, alow);
+                        }
+                        if (high & (1<<26)) {
+                                rdmsr (MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
+                                printk (" at %08x%08x", ahigh, alow);
+                        }
+                        printk ("\n");
+                }
+        }
+
+        if (recover & 2)
+                panic ("CPU context corrupt");
+        if (recover & 1)
+                panic ("Unable to continue");
+
+        printk(KERN_EMERG "Attempting to continue.\n");
+        /* 
+         * Do not clear the MSR_IA32_MCi_STATUS if the error is not 
+         * recoverable/continuable.This will allow BIOS to look at the MSRs
+         * for errors if the OS could not log the error.
+         */
+        for (i=0; i<nr_mce_banks; i++) {
+                u32 msr;
+                msr = MSR_IA32_MC0_STATUS+i*4;
+                rdmsr (msr, low, high);
+                if (high&(1<<31)) {
+                        /* Clear it */
+                        wrmsr(msr, 0UL, 0UL);
+                        /* Serialize */
+                        wmb();
+                        add_taint(TAINT_MACHINE_CHECK);
+                }
+        }
+        mcgstl &= ~(1<<2);
+        wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth);
+}
+
+
+void __init intel_p4_mcheck_init(struct cpuinfo_x86 *c)
+{
+        u32 l, h;
+        int i;
+        
+        machine_check_vector = intel_machine_check;
+        wmb();
+
+        printk (KERN_INFO "Intel machine check architecture supported.\n");
+        rdmsr (MSR_IA32_MCG_CAP, l, h);
+        if (l & (1<<8)) /* Control register present ? */
+                wrmsr (MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
+        nr_mce_banks = l & 0xff;
+
+        for (i=0; i<nr_mce_banks; i++) {
+                wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
+                wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
+        }
+
+        set_in_cr4 (X86_CR4_MCE);
+        printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
+                smp_processor_id());
+
+        /* Check for P4/Xeon extended MCE MSRs */
+        rdmsr (MSR_IA32_MCG_CAP, l, h);
+        if (l & (1<<9)) {/* MCG_EXT_P */
+                mce_num_extended_msrs = (l >> 16) & 0xff;
+                printk (KERN_INFO "CPU%d: Intel P4/Xeon Extended MCE MSRs (%d)"
+                                " available\n",
+                        smp_processor_id(), mce_num_extended_msrs);
+
+#ifdef CONFIG_X86_MCE_P4THERMAL
+                /* Check for P4/Xeon Thermal monitor */
+                intel_init_thermal(c);
+#endif
+        }
+}
diff --git a/arch/i386/kernel/cpu/mcheck/p5.c b/arch/i386/kernel/cpu/mcheck/p5.c
new file mode 100644
index 000000000000..c45a1b485c80
--- /dev/null
+++ b/arch/i386/kernel/cpu/mcheck/p5.c
@@ -0,0 +1,54 @@
+/*
+ * P5 specific Machine Check Exception Reporting
+ * (C) Copyright 2002 Alan Cox <alan@redhat.com>
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+
+#include <asm/processor.h> 
+#include <asm/system.h>
+#include <asm/msr.h>
+
+#include "mce.h"
+
+/* Machine check handler for Pentium class Intel */
+static fastcall void pentium_machine_check(struct pt_regs * regs, long error_code)
+{
+        u32 loaddr, hi, lotype;
+        rdmsr(MSR_IA32_P5_MC_ADDR, loaddr, hi);
+        rdmsr(MSR_IA32_P5_MC_TYPE, lotype, hi);
+        printk(KERN_EMERG "CPU#%d: Machine Check Exception:  0x%8X (type 0x%8X).\n", smp_processor_id(), loaddr, lotype);
+        if(lotype&(1<<5))
+                printk(KERN_EMERG "CPU#%d: Possible thermal failure (CPU on fire ?).\n", smp_processor_id());
+        add_taint(TAINT_MACHINE_CHECK);
+}
+
+/* Set up machine check reporting for processors with Intel style MCE */
+void __init intel_p5_mcheck_init(struct cpuinfo_x86 *c)
+{
+        u32 l, h;
+        
+        /*Check for MCE support */
+        if( !cpu_has(c, X86_FEATURE_MCE) )
+                return; 
+
+        /* Default P5 to off as its often misconnected */
+        if(mce_disabled != -1)
+                return;
+        machine_check_vector = pentium_machine_check;
+        wmb();
+
+        /* Read registers before enabling */
+        rdmsr(MSR_IA32_P5_MC_ADDR, l, h);
+        rdmsr(MSR_IA32_P5_MC_TYPE, l, h);
+        printk(KERN_INFO "Intel old style machine check architecture supported.\n");
+
+        /* Enable MCE */
+        set_in_cr4(X86_CR4_MCE);
+        printk(KERN_INFO "Intel old style machine check reporting enabled on CPU#%d.\n", smp_processor_id());
+}
diff --git a/arch/i386/kernel/cpu/mcheck/p6.c b/arch/i386/kernel/cpu/mcheck/p6.c
new file mode 100644
index 000000000000..46640f8c2494
--- /dev/null
+++ b/arch/i386/kernel/cpu/mcheck/p6.c
@@ -0,0 +1,115 @@
+/*
+ * P6 specific Machine Check Exception Reporting
+ * (C) Copyright 2002 Alan Cox <alan@redhat.com>
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+
+#include <asm/processor.h> 
+#include <asm/system.h>
+#include <asm/msr.h>
+
+#include "mce.h"
+
+/* Machine Check Handler For PII/PIII */
+static fastcall void intel_machine_check(struct pt_regs * regs, long error_code)
+{
+        int recover=1;
+        u32 alow, ahigh, high, low;
+        u32 mcgstl, mcgsth;
+        int i;
+
+        rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
+        if (mcgstl & (1<<0))    /* Recoverable ? */
+                recover=0;
+
+        printk (KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
+                smp_processor_id(), mcgsth, mcgstl);
+
+        for (i=0; i<nr_mce_banks; i++) {
+                rdmsr (MSR_IA32_MC0_STATUS+i*4,low, high);
+                if (high & (1<<31)) {
+                        if (high & (1<<29))
+                                recover |= 1;
+                        if (high & (1<<25))
+                                recover |= 2;
+                        printk (KERN_EMERG "Bank %d: %08x%08x", i, high, low);
+                        high &= ~(1<<31);
+                        if (high & (1<<27)) {
+                                rdmsr (MSR_IA32_MC0_MISC+i*4, alow, ahigh);
+                                printk ("[%08x%08x]", ahigh, alow);
+                        }
+                        if (high & (1<<26)) {
+                                rdmsr (MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
+                                printk (" at %08x%08x", ahigh, alow);
+                        }
+                        printk ("\n");
+                }
+        }
+
+        if (recover & 2)
+                panic ("CPU context corrupt");
+        if (recover & 1)
+                panic ("Unable to continue");
+
+        printk (KERN_EMERG "Attempting to continue.\n");
+        /* 
+         * Do not clear the MSR_IA32_MCi_STATUS if the error is not 
+         * recoverable/continuable.This will allow BIOS to look at the MSRs
+         * for errors if the OS could not log the error.
+         */
+        for (i=0; i<nr_mce_banks; i++) {
+                unsigned int msr;
+                msr = MSR_IA32_MC0_STATUS+i*4;
+                rdmsr (msr,low, high);
+                if (high & (1<<31)) {
+                        /* Clear it */
+                        wrmsr (msr, 0UL, 0UL);
+                        /* Serialize */
+                        wmb();
+                        add_taint(TAINT_MACHINE_CHECK);
+                }
+        }
+        mcgstl &= ~(1<<2);
+        wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth);
+}
+
+/* Set up machine check reporting for processors with Intel style MCE */
+void __init intel_p6_mcheck_init(struct cpuinfo_x86 *c)
+{
+        u32 l, h;
+        int i;
+        
+        /* Check for MCE support */
+        if (!cpu_has(c, X86_FEATURE_MCE))
+                return;
+
+        /* Check for PPro style MCA */
+        if (!cpu_has(c, X86_FEATURE_MCA))
+                return;
+
+        /* Ok machine check is available */
+        machine_check_vector = intel_machine_check;
+        wmb();
+
+        printk (KERN_INFO "Intel machine check architecture supported.\n");
+        rdmsr (MSR_IA32_MCG_CAP, l, h);
+        if (l & (1<<8)) /* Control register present ? */
+                wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
+        nr_mce_banks = l & 0xff;
+
+        /* Don't enable bank 0 on intel P6 cores, it goes bang quickly. */
+        for (i=1; i<nr_mce_banks; i++) {
+                wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
+                wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
+        }
+
+        set_in_cr4 (X86_CR4_MCE);
+        printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
+                smp_processor_id());
+}
diff --git a/arch/i386/kernel/cpu/mcheck/winchip.c b/arch/i386/kernel/cpu/mcheck/winchip.c
new file mode 100644
index 000000000000..753fa7acb984
--- /dev/null
+++ b/arch/i386/kernel/cpu/mcheck/winchip.c
@@ -0,0 +1,37 @@
+/*
+ * IDT Winchip specific Machine Check Exception Reporting
+ * (C) Copyright 2002 Alan Cox <alan@redhat.com>
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <asm/processor.h> 
+#include <asm/system.h>
+#include <asm/msr.h>
+
+#include "mce.h"
+
+/* Machine check handler for WinChip C6 */
+static fastcall void winchip_machine_check(struct pt_regs * regs, long error_code)
+{
+        printk(KERN_EMERG "CPU0: Machine Check Exception.\n");
+        add_taint(TAINT_MACHINE_CHECK);
+}
+
+/* Set up machine check reporting on the Winchip C6 series */
+void __init winchip_mcheck_init(struct cpuinfo_x86 *c)
+{
+        u32 lo, hi;
+        machine_check_vector = winchip_machine_check;
+        wmb();
+        rdmsr(MSR_IDT_FCR1, lo, hi);
+        lo|= (1<<2);    /* Enable EIERRINT (int 18 MCE) */
+        lo&= ~(1<<4);   /* Enable MCE */
+        wrmsr(MSR_IDT_FCR1, lo, hi);
+        set_in_cr4(X86_CR4_MCE);
+        printk(KERN_INFO "Winchip machine check reporting enabled on CPU#0.\n");
+}
diff --git a/arch/i386/kernel/cpu/mtrr/Makefile b/arch/i386/kernel/cpu/mtrr/Makefile
new file mode 100644
index 000000000000..a25b701ab84e
--- /dev/null
+++ b/arch/i386/kernel/cpu/mtrr/Makefile
@@ -0,0 +1,5 @@
+obj-y           := main.o if.o generic.o state.o
+obj-y           += amd.o
+obj-y           += cyrix.o
+obj-y           += centaur.o
+
diff --git a/arch/i386/kernel/cpu/mtrr/amd.c b/arch/i386/kernel/cpu/mtrr/amd.c
new file mode 100644
index 000000000000..1a1e04b6fd00
--- /dev/null
+++ b/arch/i386/kernel/cpu/mtrr/amd.c
@@ -0,0 +1,121 @@
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <asm/mtrr.h>
+#include <asm/msr.h>
+
+#include "mtrr.h"
+
+static void
+amd_get_mtrr(unsigned int reg, unsigned long *base,
+             unsigned int *size, mtrr_type * type)
+{
+        unsigned long low, high;
+
+        rdmsr(MSR_K6_UWCCR, low, high);
+        /*  Upper dword is region 1, lower is region 0  */
+        if (reg == 1)
+                low = high;
+        /*  The base masks off on the right alignment  */
+        *base = (low & 0xFFFE0000) >> PAGE_SHIFT;
+        *type = 0;
+        if (low & 1)
+                *type = MTRR_TYPE_UNCACHABLE;
+        if (low & 2)
+                *type = MTRR_TYPE_WRCOMB;
+        if (!(low & 3)) {
+                *size = 0;
+                return;
+        }
+        /*
+         *  This needs a little explaining. The size is stored as an
+         *  inverted mask of bits of 128K granularity 15 bits long offset
+         *  2 bits
+         *
+         *  So to get a size we do invert the mask and add 1 to the lowest
+         *  mask bit (4 as its 2 bits in). This gives us a size we then shift
+         *  to turn into 128K blocks
+         *
+         *  eg              111 1111 1111 1100      is 512K
+         *
+         *  invert          000 0000 0000 0011
+         *  +1              000 0000 0000 0100
+         *  *128K   ...
+         */
+        low = (~low) & 0x1FFFC;
+        *size = (low + 4) << (15 - PAGE_SHIFT);
+        return;
+}
+
+static void amd_set_mtrr(unsigned int reg, unsigned long base,
+                         unsigned long size, mtrr_type type)
+/*  [SUMMARY] Set variable MTRR register on the local CPU.
+    <reg> The register to set.
+    <base> The base address of the region.
+    <size> The size of the region. If this is 0 the region is disabled.
+    <type> The type of the region.
+    <do_safe> If TRUE, do the change safely. If FALSE, safety measures should
+    be done externally.
+    [RETURNS] Nothing.
+*/
+{
+        u32 regs[2];
+
+        /*
+         *  Low is MTRR0 , High MTRR 1
+         */
+        rdmsr(MSR_K6_UWCCR, regs[0], regs[1]);
+        /*
+         *  Blank to disable
+         */
+        if (size == 0)
+                regs[reg] = 0;
+        else
+                /* Set the register to the base, the type (off by one) and an
+                   inverted bitmask of the size The size is the only odd
+                   bit. We are fed say 512K We invert this and we get 111 1111
+                   1111 1011 but if you subtract one and invert you get the   
+                   desired 111 1111 1111 1100 mask
+
+                   But ~(x - 1) == ~x + 1 == -x. Two's complement rocks!  */
+                regs[reg] = (-size >> (15 - PAGE_SHIFT) & 0x0001FFFC)
+                    | (base << PAGE_SHIFT) | (type + 1);
+
+        /*
+         *  The writeback rule is quite specific. See the manual. Its
+         *  disable local interrupts, write back the cache, set the mtrr
+         */
+        wbinvd();
+        wrmsr(MSR_K6_UWCCR, regs[0], regs[1]);
+}
+
+static int amd_validate_add_page(unsigned long base, unsigned long size, unsigned int type)
+{
+        /* Apply the K6 block alignment and size rules
+           In order
+           o Uncached or gathering only
+           o 128K or bigger block
+           o Power of 2 block
+           o base suitably aligned to the power
+        */
+        if (type > MTRR_TYPE_WRCOMB || size < (1 << (17 - PAGE_SHIFT))
+            || (size & ~(size - 1)) - size || (base & (size - 1)))
+                return -EINVAL;
+        return 0;
+}
+
+static struct mtrr_ops amd_mtrr_ops = {
+        .vendor            = X86_VENDOR_AMD,
+        .set               = amd_set_mtrr,
+        .get               = amd_get_mtrr,
+        .get_free_region   = generic_get_free_region,
+        .validate_add_page = amd_validate_add_page,
+        .have_wrcomb       = positive_have_wrcomb,
+};
+
+int __init amd_init_mtrr(void)
+{
+        set_mtrr_ops(&amd_mtrr_ops);
+        return 0;
+}
+
+//arch_initcall(amd_mtrr_init);
diff --git a/arch/i386/kernel/cpu/mtrr/centaur.c b/arch/i386/kernel/cpu/mtrr/centaur.c
new file mode 100644
index 000000000000..33f00ac314ef
--- /dev/null
+++ b/arch/i386/kernel/cpu/mtrr/centaur.c
@@ -0,0 +1,223 @@
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <asm/mtrr.h>
+#include <asm/msr.h>
+#include "mtrr.h"
+
+static struct {
+        unsigned long high;
+        unsigned long low;
+} centaur_mcr[8];
+
+static u8 centaur_mcr_reserved;
+static u8 centaur_mcr_type;     /* 0 for winchip, 1 for winchip2 */
+
+/*
+ *      Report boot time MCR setups 
+ */
+
+static int
+centaur_get_free_region(unsigned long base, unsigned long size)
+/*  [SUMMARY] Get a free MTRR.
+    <base> The starting (base) address of the region.
+    <size> The size (in bytes) of the region.
+    [RETURNS] The index of the region on success, else -1 on error.
+*/
+{
+        int i, max;
+        mtrr_type ltype;
+        unsigned long lbase;
+        unsigned int lsize;
+
+        max = num_var_ranges;
+        for (i = 0; i < max; ++i) {
+                if (centaur_mcr_reserved & (1 << i))
+                        continue;
+                mtrr_if->get(i, &lbase, &lsize, &ltype);
+                if (lsize == 0)
+                        return i;
+        }
+        return -ENOSPC;
+}
+
+void
+mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi)
+{
+        centaur_mcr[mcr].low = lo;
+        centaur_mcr[mcr].high = hi;
+}
+
+static void
+centaur_get_mcr(unsigned int reg, unsigned long *base,
+                unsigned int *size, mtrr_type * type)
+{
+        *base = centaur_mcr[reg].high >> PAGE_SHIFT;
+        *size = -(centaur_mcr[reg].low & 0xfffff000) >> PAGE_SHIFT;
+        *type = MTRR_TYPE_WRCOMB;       /*  If it is there, it is write-combining  */
+        if (centaur_mcr_type == 1 && ((centaur_mcr[reg].low & 31) & 2))
+                *type = MTRR_TYPE_UNCACHABLE;
+        if (centaur_mcr_type == 1 && (centaur_mcr[reg].low & 31) == 25)
+                *type = MTRR_TYPE_WRBACK;
+        if (centaur_mcr_type == 0 && (centaur_mcr[reg].low & 31) == 31)
+                *type = MTRR_TYPE_WRBACK;
+
+}
+
+static void centaur_set_mcr(unsigned int reg, unsigned long base,
+                            unsigned long size, mtrr_type type)
+{
+        unsigned long low, high;
+
+        if (size == 0) {
+                /*  Disable  */
+                high = low = 0;
+        } else {
+                high = base << PAGE_SHIFT;
+                if (centaur_mcr_type == 0)
+                        low = -size << PAGE_SHIFT | 0x1f;       /* only support write-combining... */
+                else {
+                        if (type == MTRR_TYPE_UNCACHABLE)
+                                low = -size << PAGE_SHIFT | 0x02;       /* NC */
+                        else
+                                low = -size << PAGE_SHIFT | 0x09;       /* WWO,WC */
+                }
+        }
+        centaur_mcr[reg].high = high;
+        centaur_mcr[reg].low = low;
+        wrmsr(MSR_IDT_MCR0 + reg, low, high);
+}
+
+#if 0
+/*
+ *      Initialise the later (saner) Winchip MCR variant. In this version
+ *      the BIOS can pass us the registers it has used (but not their values)
+ *      and the control register is read/write
+ */
+
+static void __init
+centaur_mcr1_init(void)
+{
+        unsigned i;
+        u32 lo, hi;
+
+        /* Unfortunately, MCR's are read-only, so there is no way to
+         * find out what the bios might have done.
+         */
+
+        rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+        if (((lo >> 17) & 7) == 1) {    /* Type 1 Winchip2 MCR */
+                lo &= ~0x1C0;   /* clear key */
+                lo |= 0x040;    /* set key to 1 */
+                wrmsr(MSR_IDT_MCR_CTRL, lo, hi);        /* unlock MCR */
+        }
+
+        centaur_mcr_type = 1;
+
+        /*
+         *  Clear any unconfigured MCR's.
+         */
+
+        for (i = 0; i < 8; ++i) {
+                if (centaur_mcr[i].high == 0 && centaur_mcr[i].low == 0) {
+                        if (!(lo & (1 << (9 + i))))
+                                wrmsr(MSR_IDT_MCR0 + i, 0, 0);
+                        else
+                                /*
+                                 *      If the BIOS set up an MCR we cannot see it
+                                 *      but we don't wish to obliterate it
+                                 */
+                                centaur_mcr_reserved |= (1 << i);
+                }
+        }
+        /*  
+         *  Throw the main write-combining switch... 
+         *  However if OOSTORE is enabled then people have already done far
+         *  cleverer things and we should behave. 
+         */
+
+        lo |= 15;               /* Write combine enables */
+        wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+}
+
+/*
+ *      Initialise the original winchip with read only MCR registers
+ *      no used bitmask for the BIOS to pass on and write only control
+ */
+
+static void __init
+centaur_mcr0_init(void)
+{
+        unsigned i;
+
+        /* Unfortunately, MCR's are read-only, so there is no way to
+         * find out what the bios might have done.
+         */
+
+        /* Clear any unconfigured MCR's.
+         * This way we are sure that the centaur_mcr array contains the actual
+         * values. The disadvantage is that any BIOS tweaks are thus undone.
+         *
+         */
+        for (i = 0; i < 8; ++i) {
+                if (centaur_mcr[i].high == 0 && centaur_mcr[i].low == 0)
+                        wrmsr(MSR_IDT_MCR0 + i, 0, 0);
+        }
+
+        wrmsr(MSR_IDT_MCR_CTRL, 0x01F0001F, 0); /* Write only */
+}
+
+/*
+ *      Initialise Winchip series MCR registers
+ */
+
+static void __init
+centaur_mcr_init(void)
+{
+        struct set_mtrr_context ctxt;
+
+        set_mtrr_prepare_save(&ctxt);
+        set_mtrr_cache_disable(&ctxt);
+
+        if (boot_cpu_data.x86_model == 4)
+                centaur_mcr0_init();
+        else if (boot_cpu_data.x86_model == 8 || boot_cpu_data.x86_model == 9)
+                centaur_mcr1_init();
+
+        set_mtrr_done(&ctxt);
+}
+#endif
+
+static int centaur_validate_add_page(unsigned long base, 
+                                     unsigned long size, unsigned int type)
+{
+        /*
+         *  FIXME: Winchip2 supports uncached
+         */
+        if (type != MTRR_TYPE_WRCOMB && 
+            (centaur_mcr_type == 0 || type != MTRR_TYPE_UNCACHABLE)) {
+                printk(KERN_WARNING
+                       "mtrr: only write-combining%s supported\n",
+                       centaur_mcr_type ? " and uncacheable are"
+                       : " is");
+                return -EINVAL;
+        }
+        return 0;
+}
+
+static struct mtrr_ops centaur_mtrr_ops = {
+        .vendor            = X86_VENDOR_CENTAUR,
+//      .init              = centaur_mcr_init,
+        .set               = centaur_set_mcr,
+        .get               = centaur_get_mcr,
+        .get_free_region   = centaur_get_free_region,
+        .validate_add_page = centaur_validate_add_page,
+        .have_wrcomb       = positive_have_wrcomb,
+};
+
+int __init centaur_init_mtrr(void)
+{
+        set_mtrr_ops(&centaur_mtrr_ops);
+        return 0;
+}
+
+//arch_initcall(centaur_init_mtrr);
diff --git a/arch/i386/kernel/cpu/mtrr/changelog b/arch/i386/kernel/cpu/mtrr/changelog
new file mode 100644
index 000000000000..af1368535955
--- /dev/null
+++ b/arch/i386/kernel/cpu/mtrr/changelog
@@ -0,0 +1,229 @@
+    ChangeLog
+
+    Prehistory Martin Tischhäuser <martin@ikcbarka.fzk.de>
+               Initial register-setting code (from proform-1.0).
+    19971216   Richard Gooch <rgooch@atnf.csiro.au>
+               Original version for /proc/mtrr interface, SMP-safe.
+  v1.0
+    19971217   Richard Gooch <rgooch@atnf.csiro.au>
+               Bug fix for ioctls()'s.
+               Added sample code in Documentation/mtrr.txt
+  v1.1
+    19971218   Richard Gooch <rgooch@atnf.csiro.au>
+               Disallow overlapping regions.
+    19971219   Jens Maurer <jmaurer@menuett.rhein-main.de>
+               Register-setting fixups.
+  v1.2
+    19971222   Richard Gooch <rgooch@atnf.csiro.au>
+               Fixups for kernel 2.1.75.
+  v1.3
+    19971229   David Wragg <dpw@doc.ic.ac.uk>
+               Register-setting fixups and conformity with Intel conventions.
+    19971229   Richard Gooch <rgooch@atnf.csiro.au>
+               Cosmetic changes and wrote this ChangeLog ;-)
+    19980106   Richard Gooch <rgooch@atnf.csiro.au>
+               Fixups for kernel 2.1.78.
+  v1.4
+    19980119   David Wragg <dpw@doc.ic.ac.uk>
+               Included passive-release enable code (elsewhere in PCI setup).
+  v1.5
+    19980131   Richard Gooch <rgooch@atnf.csiro.au>
+               Replaced global kernel lock with private spinlock.
+  v1.6
+    19980201   Richard Gooch <rgooch@atnf.csiro.au>
+               Added wait for other CPUs to complete changes.
+  v1.7
+    19980202   Richard Gooch <rgooch@atnf.csiro.au>
+               Bug fix in definition of <set_mtrr> for UP.
+  v1.8
+    19980319   Richard Gooch <rgooch@atnf.csiro.au>
+               Fixups for kernel 2.1.90.
+    19980323   Richard Gooch <rgooch@atnf.csiro.au>
+               Move SMP BIOS fixup before secondary CPUs call <calibrate_delay>
+  v1.9
+    19980325   Richard Gooch <rgooch@atnf.csiro.au>
+               Fixed test for overlapping regions: confused by adjacent regions
+    19980326   Richard Gooch <rgooch@atnf.csiro.au>
+               Added wbinvd in <set_mtrr_prepare>.
+    19980401   Richard Gooch <rgooch@atnf.csiro.au>
+               Bug fix for non-SMP compilation.
+    19980418   David Wragg <dpw@doc.ic.ac.uk>
+               Fixed-MTRR synchronisation for SMP and use atomic operations
+               instead of spinlocks.
+    19980418   Richard Gooch <rgooch@atnf.csiro.au>
+               Differentiate different MTRR register classes for BIOS fixup.
+  v1.10
+    19980419   David Wragg <dpw@doc.ic.ac.uk>
+               Bug fix in variable MTRR synchronisation.
+  v1.11
+    19980419   Richard Gooch <rgooch@atnf.csiro.au>
+               Fixups for kernel 2.1.97.
+  v1.12
+    19980421   Richard Gooch <rgooch@atnf.csiro.au>
+               Safer synchronisation across CPUs when changing MTRRs.
+  v1.13
+    19980423   Richard Gooch <rgooch@atnf.csiro.au>
+               Bugfix for SMP systems without MTRR support.
+  v1.14
+    19980427   Richard Gooch <rgooch@atnf.csiro.au>
+               Trap calls to <mtrr_add> and <mtrr_del> on non-MTRR machines.
+  v1.15
+    19980427   Richard Gooch <rgooch@atnf.csiro.au>
+               Use atomic bitops for setting SMP change mask.
+  v1.16
+    19980428   Richard Gooch <rgooch@atnf.csiro.au>
+               Removed spurious diagnostic message.
+  v1.17
+    19980429   Richard Gooch <rgooch@atnf.csiro.au>
+               Moved register-setting macros into this file.
+               Moved setup code from init/main.c to i386-specific areas.
+  v1.18
+    19980502   Richard Gooch <rgooch@atnf.csiro.au>
+               Moved MTRR detection outside conditionals in <mtrr_init>.
+  v1.19
+    19980502   Richard Gooch <rgooch@atnf.csiro.au>
+               Documentation improvement: mention Pentium II and AGP.
+  v1.20
+    19980521   Richard Gooch <rgooch@atnf.csiro.au>
+               Only manipulate interrupt enable flag on local CPU.
+               Allow enclosed uncachable regions.
+  v1.21
+    19980611   Richard Gooch <rgooch@atnf.csiro.au>
+               Always define <main_lock>.
+  v1.22
+    19980901   Richard Gooch <rgooch@atnf.csiro.au>
+               Removed module support in order to tidy up code.
+               Added sanity check for <mtrr_add>/<mtrr_del> before <mtrr_init>.
+               Created addition queue for prior to SMP commence.
+  v1.23
+    19980902   Richard Gooch <rgooch@atnf.csiro.au>
+               Ported patch to kernel 2.1.120-pre3.
+  v1.24
+    19980910   Richard Gooch <rgooch@atnf.csiro.au>
+               Removed sanity checks and addition queue: Linus prefers an OOPS.
+  v1.25
+    19981001   Richard Gooch <rgooch@atnf.csiro.au>
+               Fixed harmless compiler warning in include/asm-i386/mtrr.h
+               Fixed version numbering and history for v1.23 -> v1.24.
+  v1.26
+    19990118   Richard Gooch <rgooch@atnf.csiro.au>
+               Added devfs support.
+  v1.27
+    19990123   Richard Gooch <rgooch@atnf.csiro.au>
+               Changed locking to spin with reschedule.
+               Made use of new <smp_call_function>.
+  v1.28
+    19990201   Zoltán Böszörményi <zboszor@mail.externet.hu>
+               Extended the driver to be able to use Cyrix style ARRs.
+    19990204   Richard Gooch <rgooch@atnf.csiro.au>
+               Restructured Cyrix support.
+  v1.29
+    19990204   Zoltán Böszörményi <zboszor@mail.externet.hu>
+               Refined ARR support: enable MAPEN in set_mtrr_prepare()
+               and disable MAPEN in set_mtrr_done().
+    19990205   Richard Gooch <rgooch@atnf.csiro.au>
+               Minor cleanups.
+  v1.30
+    19990208   Zoltán Böszörményi <zboszor@mail.externet.hu>
+               Protect plain 6x86s (and other processors without the
+               Page Global Enable feature) against accessing CR4 in
+               set_mtrr_prepare() and set_mtrr_done().
+    19990210   Richard Gooch <rgooch@atnf.csiro.au>
+               Turned <set_mtrr_up> and <get_mtrr> into function pointers.
+  v1.31
+    19990212   Zoltán Böszörményi <zboszor@mail.externet.hu>
+               Major rewrite of cyrix_arr_init(): do not touch ARRs,
+               leave them as the BIOS have set them up.
+               Enable usage of all 8 ARRs.
+               Avoid multiplications by 3 everywhere and other
+               code clean ups/speed ups.
+    19990213   Zoltán Böszörményi <zboszor@mail.externet.hu>
+               Set up other Cyrix processors identical to the boot cpu.
+               Since Cyrix don't support Intel APIC, this is l'art pour l'art.
+               Weigh ARRs by size:
+               If size <= 32M is given, set up ARR# we were given.
+               If size >  32M is given, set up ARR7 only if it is free,
+               fail otherwise.
+    19990214   Zoltán Böszörményi <zboszor@mail.externet.hu>
+               Also check for size >= 256K if we are to set up ARR7,
+               mtrr_add() returns the value it gets from set_mtrr()
+    19990218   Zoltán Böszörményi <zboszor@mail.externet.hu>
+               Remove Cyrix "coma bug" workaround from here.
+               Moved to linux/arch/i386/kernel/setup.c and
+               linux/include/asm-i386/bugs.h
+    19990228   Richard Gooch <rgooch@atnf.csiro.au>
+               Added MTRRIOC_KILL_ENTRY ioctl(2)
+               Trap for counter underflow in <mtrr_file_del>.
+               Trap for 4 MiB aligned regions for PPro, stepping <= 7.
+    19990301   Richard Gooch <rgooch@atnf.csiro.au>
+               Created <get_free_region> hook.
+    19990305   Richard Gooch <rgooch@atnf.csiro.au>
+               Temporarily disable AMD support now MTRR capability flag is set.
+  v1.32
+    19990308   Zoltán Böszörményi <zboszor@mail.externet.hu>
+               Adjust my changes (19990212-19990218) to Richard Gooch's
+               latest changes. (19990228-19990305)
+  v1.33
+    19990309   Richard Gooch <rgooch@atnf.csiro.au>
+               Fixed typo in <printk> message.
+    19990310   Richard Gooch <rgooch@atnf.csiro.au>
+               Support K6-II/III based on Alan Cox's <alan@redhat.com> patches.
+  v1.34
+    19990511   Bart Hartgers <bart@etpmod.phys.tue.nl>
+               Support Centaur C6 MCR's.
+    19990512   Richard Gooch <rgooch@atnf.csiro.au>
+               Minor cleanups.
+  v1.35
+    19990707   Zoltán Böszörményi <zboszor@mail.externet.hu>
+               Check whether ARR3 is protected in cyrix_get_free_region()
+               and mtrr_del(). The code won't attempt to delete or change it
+               from now on if the BIOS protected ARR3. It silently skips ARR3
+               in cyrix_get_free_region() or returns with an error code from
+               mtrr_del().
+    19990711   Zoltán Böszörményi <zboszor@mail.externet.hu>
+               Reset some bits in the CCRs in cyrix_arr_init() to disable SMM
+               if ARR3 isn't protected. This is needed because if SMM is active
+               and ARR3 isn't protected then deleting and setting ARR3 again
+               may lock up the processor. With SMM entirely disabled, it does
+               not happen.
+    19990812   Zoltán Böszörményi <zboszor@mail.externet.hu>
+               Rearrange switch() statements so the driver accomodates to
+               the fact that the AMD Athlon handles its MTRRs the same way
+               as Intel does.
+    19990814   Zoltán Böszörményi <zboszor@mail.externet.hu>
+               Double check for Intel in mtrr_add()'s big switch() because
+               that revision check is only valid for Intel CPUs.
+    19990819   Alan Cox <alan@redhat.com>
+               Tested Zoltan's changes on a pre production Athlon - 100%
+               success.
+    19991008   Manfred Spraul <manfreds@colorfullife.com>
+               replaced spin_lock_reschedule() with a normal semaphore.
+  v1.36
+    20000221   Richard Gooch <rgooch@atnf.csiro.au>
+               Compile fix if procfs and devfs not enabled.
+               Formatting changes.
+  v1.37
+    20001109   H. Peter Anvin <hpa@zytor.com>
+               Use the new centralized CPU feature detects.
+
+  v1.38
+    20010309   Dave Jones <davej@suse.de>
+               Add support for Cyrix III.
+
+  v1.39
+    20010312   Dave Jones <davej@suse.de>
+               Ugh, I broke AMD support.
+               Reworked fix by Troels Walsted Hansen <troels@thule.no>
+
+  v1.40
+    20010327   Dave Jones <davej@suse.de>
+               Adapted Cyrix III support to include VIA C3.
+
+  v2.0
+    20020306   Patrick Mochel <mochel@osdl.org>
+               Split mtrr.c -> mtrr/*.c
+               Converted to Linux Kernel Coding Style
+               Fixed several minor nits in form
+               Moved some SMP-only functions out, so they can be used
+                for power management in the future.
+               TODO: Fix user interface cruft.
diff --git a/arch/i386/kernel/cpu/mtrr/cyrix.c b/arch/i386/kernel/cpu/mtrr/cyrix.c
new file mode 100644
index 000000000000..933b0dd62f48
--- /dev/null
+++ b/arch/i386/kernel/cpu/mtrr/cyrix.c
@@ -0,0 +1,364 @@
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <asm/mtrr.h>
+#include <asm/msr.h>
+#include <asm/io.h>
+#include "mtrr.h"
+
+int arr3_protected;
+
+static void
+cyrix_get_arr(unsigned int reg, unsigned long *base,
+              unsigned int *size, mtrr_type * type)
+{
+        unsigned long flags;
+        unsigned char arr, ccr3, rcr, shift;
+
+        arr = CX86_ARR_BASE + (reg << 1) + reg; /* avoid multiplication by 3 */
+
+        /* Save flags and disable interrupts */
+        local_irq_save(flags);
+
+        ccr3 = getCx86(CX86_CCR3);
+        setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);       /* enable MAPEN */
+        ((unsigned char *) base)[3] = getCx86(arr);
+        ((unsigned char *) base)[2] = getCx86(arr + 1);
+        ((unsigned char *) base)[1] = getCx86(arr + 2);
+        rcr = getCx86(CX86_RCR_BASE + reg);
+        setCx86(CX86_CCR3, ccr3);       /* disable MAPEN */
+
+        /* Enable interrupts if it was enabled previously */
+        local_irq_restore(flags);
+        shift = ((unsigned char *) base)[1] & 0x0f;
+        *base >>= PAGE_SHIFT;
+
+        /* Power of two, at least 4K on ARR0-ARR6, 256K on ARR7
+         * Note: shift==0xf means 4G, this is unsupported.
+         */
+        if (shift)
+                *size = (reg < 7 ? 0x1UL : 0x40UL) << (shift - 1);
+        else
+                *size = 0;
+
+        /* Bit 0 is Cache Enable on ARR7, Cache Disable on ARR0-ARR6 */
+        if (reg < 7) {
+                switch (rcr) {
+                case 1:
+                        *type = MTRR_TYPE_UNCACHABLE;
+                        break;
+                case 8:
+                        *type = MTRR_TYPE_WRBACK;
+                        break;
+                case 9:
+                        *type = MTRR_TYPE_WRCOMB;
+                        break;
+                case 24:
+                default:
+                        *type = MTRR_TYPE_WRTHROUGH;
+                        break;
+                }
+        } else {
+                switch (rcr) {
+                case 0:
+                        *type = MTRR_TYPE_UNCACHABLE;
+                        break;
+                case 8:
+                        *type = MTRR_TYPE_WRCOMB;
+                        break;
+                case 9:
+                        *type = MTRR_TYPE_WRBACK;
+                        break;
+                case 25:
+                default:
+                        *type = MTRR_TYPE_WRTHROUGH;
+                        break;
+                }
+        }
+}
+
+static int
+cyrix_get_free_region(unsigned long base, unsigned long size)
+/*  [SUMMARY] Get a free ARR.
+    <base> The starting (base) address of the region.
+    <size> The size (in bytes) of the region.
+    [RETURNS] The index of the region on success, else -1 on error.
+*/
+{
+        int i;
+        mtrr_type ltype;
+        unsigned long lbase;
+        unsigned int  lsize;
+
+        /* If we are to set up a region >32M then look at ARR7 immediately */
+        if (size > 0x2000) {
+                cyrix_get_arr(7, &lbase, &lsize, &ltype);
+                if (lsize == 0)
+                        return 7;
+                /*  Else try ARR0-ARR6 first  */
+        } else {
+                for (i = 0; i < 7; i++) {
+                        cyrix_get_arr(i, &lbase, &lsize, &ltype);
+                        if ((i == 3) && arr3_protected)
+                                continue;
+                        if (lsize == 0)
+                                return i;
+                }
+                /* ARR0-ARR6 isn't free, try ARR7 but its size must be at least 256K */
+                cyrix_get_arr(i, &lbase, &lsize, &ltype);
+                if ((lsize == 0) && (size >= 0x40))
+                        return i;
+        }
+        return -ENOSPC;
+}
+
+static u32 cr4 = 0;
+static u32 ccr3;
+
+static void prepare_set(void)
+{
+        u32 cr0;
+
+        /*  Save value of CR4 and clear Page Global Enable (bit 7)  */
+        if ( cpu_has_pge ) {
+                cr4 = read_cr4();
+                write_cr4(cr4 & (unsigned char) ~(1 << 7));
+        }
+
+        /*  Disable and flush caches. Note that wbinvd flushes the TLBs as
+            a side-effect  */
+        cr0 = read_cr0() | 0x40000000;
+        wbinvd();
+        write_cr0(cr0);
+        wbinvd();
+
+        /* Cyrix ARRs - everything else were excluded at the top */
+        ccr3 = getCx86(CX86_CCR3);
+
+        /* Cyrix ARRs - everything else were excluded at the top */
+        setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);
+
+}
+
+static void post_set(void)
+{
+        /*  Flush caches and TLBs  */
+        wbinvd();
+
+        /* Cyrix ARRs - everything else was excluded at the top */
+        setCx86(CX86_CCR3, ccr3);
+                
+        /*  Enable caches  */
+        write_cr0(read_cr0() & 0xbfffffff);
+
+        /*  Restore value of CR4  */
+        if ( cpu_has_pge )
+                write_cr4(cr4);
+}
+
+static void cyrix_set_arr(unsigned int reg, unsigned long base,
+                          unsigned long size, mtrr_type type)
+{
+        unsigned char arr, arr_type, arr_size;
+
+        arr = CX86_ARR_BASE + (reg << 1) + reg; /* avoid multiplication by 3 */
+
+        /* count down from 32M (ARR0-ARR6) or from 2G (ARR7) */
+        if (reg >= 7)
+                size >>= 6;
+
+        size &= 0x7fff;         /* make sure arr_size <= 14 */
+        for (arr_size = 0; size; arr_size++, size >>= 1) ;
+
+        if (reg < 7) {
+                switch (type) {
+                case MTRR_TYPE_UNCACHABLE:
+                        arr_type = 1;
+                        break;
+                case MTRR_TYPE_WRCOMB:
+                        arr_type = 9;
+                        break;
+                case MTRR_TYPE_WRTHROUGH:
+                        arr_type = 24;
+                        break;
+                default:
+                        arr_type = 8;
+                        break;
+                }
+        } else {
+                switch (type) {
+                case MTRR_TYPE_UNCACHABLE:
+                        arr_type = 0;
+                        break;
+                case MTRR_TYPE_WRCOMB:
+                        arr_type = 8;
+                        break;
+                case MTRR_TYPE_WRTHROUGH:
+                        arr_type = 25;
+                        break;
+                default:
+                        arr_type = 9;
+                        break;
+                }
+        }
+
+        prepare_set();
+
+        base <<= PAGE_SHIFT;
+        setCx86(arr, ((unsigned char *) &base)[3]);
+        setCx86(arr + 1, ((unsigned char *) &base)[2]);
+        setCx86(arr + 2, (((unsigned char *) &base)[1]) | arr_size);
+        setCx86(CX86_RCR_BASE + reg, arr_type);
+
+        post_set();
+}
+
+typedef struct {
+        unsigned long base;
+        unsigned int size;
+        mtrr_type type;
+} arr_state_t;
+
+static arr_state_t arr_state[8] __initdata = {
+        {0UL, 0UL, 0UL}, {0UL, 0UL, 0UL}, {0UL, 0UL, 0UL}, {0UL, 0UL, 0UL},
+        {0UL, 0UL, 0UL}, {0UL, 0UL, 0UL}, {0UL, 0UL, 0UL}, {0UL, 0UL, 0UL}
+};
+
+static unsigned char ccr_state[7] __initdata = { 0, 0, 0, 0, 0, 0, 0 };
+
+static void cyrix_set_all(void)
+{
+        int i;
+
+        prepare_set();
+
+        /* the CCRs are not contiguous */
+        for (i = 0; i < 4; i++)
+                setCx86(CX86_CCR0 + i, ccr_state[i]);
+        for (; i < 7; i++)
+                setCx86(CX86_CCR4 + i, ccr_state[i]);
+        for (i = 0; i < 8; i++)
+                cyrix_set_arr(i, arr_state[i].base, 
+                              arr_state[i].size, arr_state[i].type);
+
+        post_set();
+}
+
+#if 0
+/*
+ * On Cyrix 6x86(MX) and M II the ARR3 is special: it has connection
+ * with the SMM (System Management Mode) mode. So we need the following:
+ * Check whether SMI_LOCK (CCR3 bit 0) is set
+ *   if it is set, write a warning message: ARR3 cannot be changed!
+ *     (it cannot be changed until the next processor reset)
+ *   if it is reset, then we can change it, set all the needed bits:
+ *   - disable access to SMM memory through ARR3 range (CCR1 bit 7 reset)
+ *   - disable access to SMM memory (CCR1 bit 2 reset)
+ *   - disable SMM mode (CCR1 bit 1 reset)
+ *   - disable write protection of ARR3 (CCR6 bit 1 reset)
+ *   - (maybe) disable ARR3
+ * Just to be sure, we enable ARR usage by the processor (CCR5 bit 5 set)
+ */
+static void __init
+cyrix_arr_init(void)
+{
+        struct set_mtrr_context ctxt;
+        unsigned char ccr[7];
+        int ccrc[7] = { 0, 0, 0, 0, 0, 0, 0 };
+#ifdef CONFIG_SMP
+        int i;
+#endif
+
+        /* flush cache and enable MAPEN */
+        set_mtrr_prepare_save(&ctxt);
+        set_mtrr_cache_disable(&ctxt);
+
+        /* Save all CCRs locally */
+        ccr[0] = getCx86(CX86_CCR0);
+        ccr[1] = getCx86(CX86_CCR1);
+        ccr[2] = getCx86(CX86_CCR2);
+        ccr[3] = ctxt.ccr3;
+        ccr[4] = getCx86(CX86_CCR4);
+        ccr[5] = getCx86(CX86_CCR5);
+        ccr[6] = getCx86(CX86_CCR6);
+
+        if (ccr[3] & 1) {
+                ccrc[3] = 1;
+                arr3_protected = 1;
+        } else {
+                /* Disable SMM mode (bit 1), access to SMM memory (bit 2) and
+                 * access to SMM memory through ARR3 (bit 7).
+                 */
+                if (ccr[1] & 0x80) {
+                        ccr[1] &= 0x7f;
+                        ccrc[1] |= 0x80;
+                }
+                if (ccr[1] & 0x04) {
+                        ccr[1] &= 0xfb;
+                        ccrc[1] |= 0x04;
+                }
+                if (ccr[1] & 0x02) {
+                        ccr[1] &= 0xfd;
+                        ccrc[1] |= 0x02;
+                }
+                arr3_protected = 0;
+                if (ccr[6] & 0x02) {
+                        ccr[6] &= 0xfd;
+                        ccrc[6] = 1;    /* Disable write protection of ARR3 */
+                        setCx86(CX86_CCR6, ccr[6]);
+                }
+                /* Disable ARR3. This is safe now that we disabled SMM. */
+                /* cyrix_set_arr_up (3, 0, 0, 0, FALSE); */
+        }
+        /* If we changed CCR1 in memory, change it in the processor, too. */
+        if (ccrc[1])
+                setCx86(CX86_CCR1, ccr[1]);
+
+        /* Enable ARR usage by the processor */
+        if (!(ccr[5] & 0x20)) {
+                ccr[5] |= 0x20;
+                ccrc[5] = 1;
+                setCx86(CX86_CCR5, ccr[5]);
+        }
+#ifdef CONFIG_SMP
+        for (i = 0; i < 7; i++)
+                ccr_state[i] = ccr[i];
+        for (i = 0; i < 8; i++)
+                cyrix_get_arr(i,
+                              &arr_state[i].base, &arr_state[i].size,
+                              &arr_state[i].type);
+#endif
+
+        set_mtrr_done(&ctxt);   /* flush cache and disable MAPEN */
+
+        if (ccrc[5])
+                printk(KERN_INFO "mtrr: ARR usage was not enabled, enabled manually\n");
+        if (ccrc[3])
+                printk(KERN_INFO "mtrr: ARR3 cannot be changed\n");
+/*
+    if ( ccrc[1] & 0x80) printk ("mtrr: SMM memory access through ARR3 disabled\n");
+    if ( ccrc[1] & 0x04) printk ("mtrr: SMM memory access disabled\n");
+    if ( ccrc[1] & 0x02) printk ("mtrr: SMM mode disabled\n");
+*/
+        if (ccrc[6])
+                printk(KERN_INFO "mtrr: ARR3 was write protected, unprotected\n");
+}
+#endif
+
+static struct mtrr_ops cyrix_mtrr_ops = {
+        .vendor            = X86_VENDOR_CYRIX,
+//      .init              = cyrix_arr_init,
+        .set_all           = cyrix_set_all,
+        .set               = cyrix_set_arr,
+        .get               = cyrix_get_arr,
+        .get_free_region   = cyrix_get_free_region,
+        .validate_add_page = generic_validate_add_page,
+        .have_wrcomb       = positive_have_wrcomb,
+};
+
+int __init cyrix_init_mtrr(void)
+{
+        set_mtrr_ops(&cyrix_mtrr_ops);
+        return 0;
+}
+
+//arch_initcall(cyrix_init_mtrr);
diff --git a/arch/i386/kernel/cpu/mtrr/generic.c b/arch/i386/kernel/cpu/mtrr/generic.c
new file mode 100644
index 000000000000..a4cce454d09b
--- /dev/null
+++ b/arch/i386/kernel/cpu/mtrr/generic.c
@@ -0,0 +1,417 @@
+/* This only handles 32bit MTRR on 32bit hosts. This is strictly wrong
+   because MTRRs can span upto 40 bits (36bits on most modern x86) */ 
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <asm/io.h>
+#include <asm/mtrr.h>
+#include <asm/msr.h>
+#include <asm/system.h>
+#include <asm/cpufeature.h>
+#include <asm/tlbflush.h>
+#include "mtrr.h"
+
+struct mtrr_state {
+        struct mtrr_var_range *var_ranges;
+        mtrr_type fixed_ranges[NUM_FIXED_RANGES];
+        unsigned char enabled;
+        mtrr_type def_type;
+};
+
+static unsigned long smp_changes_mask;
+static struct mtrr_state mtrr_state = {};
+
+/*  Get the MSR pair relating to a var range  */
+static void __init
+get_mtrr_var_range(unsigned int index, struct mtrr_var_range *vr)
+{
+        rdmsr(MTRRphysBase_MSR(index), vr->base_lo, vr->base_hi);
+        rdmsr(MTRRphysMask_MSR(index), vr->mask_lo, vr->mask_hi);
+}
+
+static void __init
+get_fixed_ranges(mtrr_type * frs)
+{
+        unsigned int *p = (unsigned int *) frs;
+        int i;
+
+        rdmsr(MTRRfix64K_00000_MSR, p[0], p[1]);
+
+        for (i = 0; i < 2; i++)
+                rdmsr(MTRRfix16K_80000_MSR + i, p[2 + i * 2], p[3 + i * 2]);
+        for (i = 0; i < 8; i++)
+                rdmsr(MTRRfix4K_C0000_MSR + i, p[6 + i * 2], p[7 + i * 2]);
+}
+
+/*  Grab all of the MTRR state for this CPU into *state  */
+void __init get_mtrr_state(void)
+{
+        unsigned int i;
+        struct mtrr_var_range *vrs;
+        unsigned lo, dummy;
+
+        if (!mtrr_state.var_ranges) {
+                mtrr_state.var_ranges = kmalloc(num_var_ranges * sizeof (struct mtrr_var_range), 
+                                                GFP_KERNEL);
+                if (!mtrr_state.var_ranges)
+                        return;
+        } 
+        vrs = mtrr_state.var_ranges;
+
+        for (i = 0; i < num_var_ranges; i++)
+                get_mtrr_var_range(i, &vrs[i]);
+        get_fixed_ranges(mtrr_state.fixed_ranges);
+
+        rdmsr(MTRRdefType_MSR, lo, dummy);
+        mtrr_state.def_type = (lo & 0xff);
+        mtrr_state.enabled = (lo & 0xc00) >> 10;
+}
+
+/*  Free resources associated with a struct mtrr_state  */
+void __init finalize_mtrr_state(void)
+{
+        if (mtrr_state.var_ranges)
+                kfree(mtrr_state.var_ranges);
+        mtrr_state.var_ranges = NULL;
+}
+
+/*  Some BIOS's are fucked and don't set all MTRRs the same!  */
+void __init mtrr_state_warn(void)
+{
+        unsigned long mask = smp_changes_mask;
+
+        if (!mask)
+                return;
+        if (mask & MTRR_CHANGE_MASK_FIXED)
+                printk(KERN_WARNING "mtrr: your CPUs had inconsistent fixed MTRR settings\n");
+        if (mask & MTRR_CHANGE_MASK_VARIABLE)
+                printk(KERN_WARNING "mtrr: your CPUs had inconsistent variable MTRR settings\n");
+        if (mask & MTRR_CHANGE_MASK_DEFTYPE)
+                printk(KERN_WARNING "mtrr: your CPUs had inconsistent MTRRdefType settings\n");
+        printk(KERN_INFO "mtrr: probably your BIOS does not setup all CPUs.\n");
+        printk(KERN_INFO "mtrr: corrected configuration.\n");
+}
+
+/* Doesn't attempt to pass an error out to MTRR users
+   because it's quite complicated in some cases and probably not
+   worth it because the best error handling is to ignore it. */
+void mtrr_wrmsr(unsigned msr, unsigned a, unsigned b)
+{
+        if (wrmsr_safe(msr, a, b) < 0)
+                printk(KERN_ERR
+                        "MTRR: CPU %u: Writing MSR %x to %x:%x failed\n",
+                        smp_processor_id(), msr, a, b);
+}
+
+int generic_get_free_region(unsigned long base, unsigned long size)
+/*  [SUMMARY] Get a free MTRR.
+    <base> The starting (base) address of the region.
+    <size> The size (in bytes) of the region.
+    [RETURNS] The index of the region on success, else -1 on error.
+*/
+{
+        int i, max;
+        mtrr_type ltype;
+        unsigned long lbase;
+        unsigned lsize;
+
+        max = num_var_ranges;
+        for (i = 0; i < max; ++i) {
+                mtrr_if->get(i, &lbase, &lsize, &ltype);
+                if (lsize == 0)
+                        return i;
+        }
+        return -ENOSPC;
+}
+
+void generic_get_mtrr(unsigned int reg, unsigned long *base,
+                      unsigned int *size, mtrr_type * type)
+{
+        unsigned int mask_lo, mask_hi, base_lo, base_hi;
+
+        rdmsr(MTRRphysMask_MSR(reg), mask_lo, mask_hi);
+        if ((mask_lo & 0x800) == 0) {
+                /*  Invalid (i.e. free) range  */
+                *base = 0;
+                *size = 0;
+                *type = 0;
+                return;
+        }
+
+        rdmsr(MTRRphysBase_MSR(reg), base_lo, base_hi);
+
+        /* Work out the shifted address mask. */
+        mask_lo = size_or_mask | mask_hi << (32 - PAGE_SHIFT)
+            | mask_lo >> PAGE_SHIFT;
+
+        /* This works correctly if size is a power of two, i.e. a
+           contiguous range. */
+        *size = -mask_lo;
+        *base = base_hi << (32 - PAGE_SHIFT) | base_lo >> PAGE_SHIFT;
+        *type = base_lo & 0xff;
+}
+
+static int set_fixed_ranges(mtrr_type * frs)
+{
+        unsigned int *p = (unsigned int *) frs;
+        int changed = FALSE;
+        int i;
+        unsigned int lo, hi;
+
+        rdmsr(MTRRfix64K_00000_MSR, lo, hi);
+        if (p[0] != lo || p[1] != hi) {
+                mtrr_wrmsr(MTRRfix64K_00000_MSR, p[0], p[1]);
+                changed = TRUE;
+        }
+
+        for (i = 0; i < 2; i++) {
+                rdmsr(MTRRfix16K_80000_MSR + i, lo, hi);
+                if (p[2 + i * 2] != lo || p[3 + i * 2] != hi) {
+                        mtrr_wrmsr(MTRRfix16K_80000_MSR + i, p[2 + i * 2],
+                              p[3 + i * 2]);
+                        changed = TRUE;
+                }
+        }
+
+        for (i = 0; i < 8; i++) {
+                rdmsr(MTRRfix4K_C0000_MSR + i, lo, hi);
+                if (p[6 + i * 2] != lo || p[7 + i * 2] != hi) {
+                        mtrr_wrmsr(MTRRfix4K_C0000_MSR + i, p[6 + i * 2],
+                              p[7 + i * 2]);
+                        changed = TRUE;
+                }
+        }
+        return changed;
+}
+
+/*  Set the MSR pair relating to a var range. Returns TRUE if
+    changes are made  */
+static int set_mtrr_var_ranges(unsigned int index, struct mtrr_var_range *vr)
+{
+        unsigned int lo, hi;
+        int changed = FALSE;
+
+        rdmsr(MTRRphysBase_MSR(index), lo, hi);
+        if ((vr->base_lo & 0xfffff0ffUL) != (lo & 0xfffff0ffUL)
+            || (vr->base_hi & 0xfUL) != (hi & 0xfUL)) {
+                mtrr_wrmsr(MTRRphysBase_MSR(index), vr->base_lo, vr->base_hi);
+                changed = TRUE;
+        }
+
+        rdmsr(MTRRphysMask_MSR(index), lo, hi);
+
+        if ((vr->mask_lo & 0xfffff800UL) != (lo & 0xfffff800UL)
+            || (vr->mask_hi & 0xfUL) != (hi & 0xfUL)) {
+                mtrr_wrmsr(MTRRphysMask_MSR(index), vr->mask_lo, vr->mask_hi);
+                changed = TRUE;
+        }
+        return changed;
+}
+
+static unsigned long set_mtrr_state(u32 deftype_lo, u32 deftype_hi)
+/*  [SUMMARY] Set the MTRR state for this CPU.
+    <state> The MTRR state information to read.
+    <ctxt> Some relevant CPU context.
+    [NOTE] The CPU must already be in a safe state for MTRR changes.
+    [RETURNS] 0 if no changes made, else a mask indication what was changed.
+*/
+{
+        unsigned int i;
+        unsigned long change_mask = 0;
+
+        for (i = 0; i < num_var_ranges; i++)
+                if (set_mtrr_var_ranges(i, &mtrr_state.var_ranges[i]))
+                        change_mask |= MTRR_CHANGE_MASK_VARIABLE;
+
+        if (set_fixed_ranges(mtrr_state.fixed_ranges))
+                change_mask |= MTRR_CHANGE_MASK_FIXED;
+
+        /*  Set_mtrr_restore restores the old value of MTRRdefType,
+           so to set it we fiddle with the saved value  */
+        if ((deftype_lo & 0xff) != mtrr_state.def_type
+            || ((deftype_lo & 0xc00) >> 10) != mtrr_state.enabled) {
+                deftype_lo |= (mtrr_state.def_type | mtrr_state.enabled << 10);
+                change_mask |= MTRR_CHANGE_MASK_DEFTYPE;
+        }
+
+        return change_mask;
+}
+
+
+static unsigned long cr4 = 0;
+static u32 deftype_lo, deftype_hi;
+static DEFINE_SPINLOCK(set_atomicity_lock);
+
+/*
+ * Since we are disabling the cache don't allow any interrupts - they
+ * would run extremely slow and would only increase the pain.  The caller must
+ * ensure that local interrupts are disabled and are reenabled after post_set()
+ * has been called.
+ */
+
+static void prepare_set(void)
+{
+        unsigned long cr0;
+
+        /*  Note that this is not ideal, since the cache is only flushed/disabled
+           for this CPU while the MTRRs are changed, but changing this requires
+           more invasive changes to the way the kernel boots  */
+
+        spin_lock(&set_atomicity_lock);
+
+        /*  Enter the no-fill (CD=1, NW=0) cache mode and flush caches. */
+        cr0 = read_cr0() | 0x40000000;  /* set CD flag */
+        write_cr0(cr0);
+        wbinvd();
+
+        /*  Save value of CR4 and clear Page Global Enable (bit 7)  */
+        if ( cpu_has_pge ) {
+                cr4 = read_cr4();
+                write_cr4(cr4 & ~X86_CR4_PGE);
+        }
+
+        /* Flush all TLBs via a mov %cr3, %reg; mov %reg, %cr3 */
+        __flush_tlb();
+
+        /*  Save MTRR state */
+        rdmsr(MTRRdefType_MSR, deftype_lo, deftype_hi);
+
+        /*  Disable MTRRs, and set the default type to uncached  */
+        mtrr_wrmsr(MTRRdefType_MSR, deftype_lo & 0xf300UL, deftype_hi);
+}
+
+static void post_set(void)
+{
+        /*  Flush TLBs (no need to flush caches - they are disabled)  */
+        __flush_tlb();
+
+        /* Intel (P6) standard MTRRs */
+        mtrr_wrmsr(MTRRdefType_MSR, deftype_lo, deftype_hi);
+                
+        /*  Enable caches  */
+        write_cr0(read_cr0() & 0xbfffffff);
+
+        /*  Restore value of CR4  */
+        if ( cpu_has_pge )
+                write_cr4(cr4);
+        spin_unlock(&set_atomicity_lock);
+}
+
+static void generic_set_all(void)
+{
+        unsigned long mask, count;
+        unsigned long flags;
+
+        local_irq_save(flags);
+        prepare_set();
+
+        /* Actually set the state */
+        mask = set_mtrr_state(deftype_lo,deftype_hi);
+
+        post_set();
+        local_irq_restore(flags);
+
+        /*  Use the atomic bitops to update the global mask  */
+        for (count = 0; count < sizeof mask * 8; ++count) {
+                if (mask & 0x01)
+                        set_bit(count, &smp_changes_mask);
+                mask >>= 1;
+        }
+        
+}
+
+static void generic_set_mtrr(unsigned int reg, unsigned long base,
+                             unsigned long size, mtrr_type type)
+/*  [SUMMARY] Set variable MTRR register on the local CPU.
+    <reg> The register to set.
+    <base> The base address of the region.
+    <size> The size of the region. If this is 0 the region is disabled.
+    <type> The type of the region.
+    <do_safe> If TRUE, do the change safely. If FALSE, safety measures should
+    be done externally.
+    [RETURNS] Nothing.
+*/
+{
+        unsigned long flags;
+
+        local_irq_save(flags);
+        prepare_set();
+
+        if (size == 0) {
+                /* The invalid bit is kept in the mask, so we simply clear the
+                   relevant mask register to disable a range. */
+                mtrr_wrmsr(MTRRphysMask_MSR(reg), 0, 0);
+        } else {
+                mtrr_wrmsr(MTRRphysBase_MSR(reg), base << PAGE_SHIFT | type,
+                      (base & size_and_mask) >> (32 - PAGE_SHIFT));
+                mtrr_wrmsr(MTRRphysMask_MSR(reg), -size << PAGE_SHIFT | 0x800,
+                      (-size & size_and_mask) >> (32 - PAGE_SHIFT));
+        }
+
+        post_set();
+        local_irq_restore(flags);
+}
+
+int generic_validate_add_page(unsigned long base, unsigned long size, unsigned int type)
+{
+        unsigned long lbase, last;
+
+        /*  For Intel PPro stepping <= 7, must be 4 MiB aligned 
+            and not touch 0x70000000->0x7003FFFF */
+        if (is_cpu(INTEL) && boot_cpu_data.x86 == 6 &&
+            boot_cpu_data.x86_model == 1 &&
+            boot_cpu_data.x86_mask <= 7) {
+                if (base & ((1 << (22 - PAGE_SHIFT)) - 1)) {
+                        printk(KERN_WARNING "mtrr: base(0x%lx000) is not 4 MiB aligned\n", base);
+                        return -EINVAL;
+                }
+                if (!(base + size < 0x70000000 || base > 0x7003FFFF) &&
+                    (type == MTRR_TYPE_WRCOMB
+                     || type == MTRR_TYPE_WRBACK)) {
+                        printk(KERN_WARNING "mtrr: writable mtrr between 0x70000000 and 0x7003FFFF may hang the CPU.\n");
+                        return -EINVAL;
+                }
+        }
+
+        if (base + size < 0x100) {
+                printk(KERN_WARNING "mtrr: cannot set region below 1 MiB (0x%lx000,0x%lx000)\n",
+                       base, size);
+                return -EINVAL;
+        }
+        /*  Check upper bits of base and last are equal and lower bits are 0
+            for base and 1 for last  */
+        last = base + size - 1;
+        for (lbase = base; !(lbase & 1) && (last & 1);
+             lbase = lbase >> 1, last = last >> 1) ;
+        if (lbase != last) {
+                printk(KERN_WARNING "mtrr: base(0x%lx000) is not aligned on a size(0x%lx000) boundary\n",
+                       base, size);
+                return -EINVAL;
+        }
+        return 0;
+}
+
+
+static int generic_have_wrcomb(void)
+{
+        unsigned long config, dummy;
+        rdmsr(MTRRcap_MSR, config, dummy);
+        return (config & (1 << 10));
+}
+
+int positive_have_wrcomb(void)
+{
+        return 1;
+}
+
+/* generic structure...
+ */
+struct mtrr_ops generic_mtrr_ops = {
+        .use_intel_if      = 1,
+        .set_all           = generic_set_all,
+        .get               = generic_get_mtrr,
+        .get_free_region   = generic_get_free_region,
+        .set               = generic_set_mtrr,
+        .validate_add_page = generic_validate_add_page,
+        .have_wrcomb       = generic_have_wrcomb,
+};
diff --git a/arch/i386/kernel/cpu/mtrr/if.c b/arch/i386/kernel/cpu/mtrr/if.c
new file mode 100644
index 000000000000..1923e0aed26a
--- /dev/null
+++ b/arch/i386/kernel/cpu/mtrr/if.c
@@ -0,0 +1,374 @@
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+#include <linux/ctype.h>
+#include <linux/module.h>
+#include <linux/seq_file.h>
+#include <asm/uaccess.h>
+
+#define LINE_SIZE 80
+
+#include <asm/mtrr.h>
+#include "mtrr.h"
+
+/* RED-PEN: this is accessed without any locking */
+extern unsigned int *usage_table;
+
+
+#define FILE_FCOUNT(f) (((struct seq_file *)((f)->private_data))->private)
+
+static char *mtrr_strings[MTRR_NUM_TYPES] =
+{
+    "uncachable",               /* 0 */
+    "write-combining",          /* 1 */
+    "?",                        /* 2 */
+    "?",                        /* 3 */
+    "write-through",            /* 4 */
+    "write-protect",            /* 5 */
+    "write-back",               /* 6 */
+};
+
+char *mtrr_attrib_to_str(int x)
+{
+        return (x <= 6) ? mtrr_strings[x] : "?";
+}
+
+#ifdef CONFIG_PROC_FS
+
+static int
+mtrr_file_add(unsigned long base, unsigned long size,
+              unsigned int type, char increment, struct file *file, int page)
+{
+        int reg, max;
+        unsigned int *fcount = FILE_FCOUNT(file); 
+
+        max = num_var_ranges;
+        if (fcount == NULL) {
+                fcount = kmalloc(max * sizeof *fcount, GFP_KERNEL);
+                if (!fcount)
+                        return -ENOMEM;
+                memset(fcount, 0, max * sizeof *fcount);
+                FILE_FCOUNT(file) = fcount;
+        }
+        if (!page) {
+                if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1)))
+                        return -EINVAL;
+                base >>= PAGE_SHIFT;
+                size >>= PAGE_SHIFT;
+        }
+        reg = mtrr_add_page(base, size, type, 1);
+        if (reg >= 0)
+                ++fcount[reg];
+        return reg;
+}
+
+static int
+mtrr_file_del(unsigned long base, unsigned long size,
+              struct file *file, int page)
+{
+        int reg;
+        unsigned int *fcount = FILE_FCOUNT(file);
+
+        if (!page) {
+                if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1)))
+                        return -EINVAL;
+                base >>= PAGE_SHIFT;
+                size >>= PAGE_SHIFT;
+        }
+        reg = mtrr_del_page(-1, base, size);
+        if (reg < 0)
+                return reg;
+        if (fcount == NULL)
+                return reg;
+        if (fcount[reg] < 1)
+                return -EINVAL;
+        --fcount[reg];
+        return reg;
+}
+
+/* RED-PEN: seq_file can seek now. this is ignored. */
+static ssize_t
+mtrr_write(struct file *file, const char __user *buf, size_t len, loff_t * ppos)
+/*  Format of control line:
+    "base=%Lx size=%Lx type=%s"     OR:
+    "disable=%d"
+*/
+{
+        int i, err;
+        unsigned long reg;
+        unsigned long long base, size;
+        char *ptr;
+        char line[LINE_SIZE];
+        size_t linelen;
+
+        if (!capable(CAP_SYS_ADMIN))
+                return -EPERM;
+        if (!len)
+                return -EINVAL;
+        memset(line, 0, LINE_SIZE);
+        if (len > LINE_SIZE)
+                len = LINE_SIZE;
+        if (copy_from_user(line, buf, len - 1))
+                return -EFAULT;
+        linelen = strlen(line);
+        ptr = line + linelen - 1;
+        if (linelen && *ptr == '\n')
+                *ptr = '\0';
+        if (!strncmp(line, "disable=", 8)) {
+                reg = simple_strtoul(line + 8, &ptr, 0);
+                err = mtrr_del_page(reg, 0, 0);
+                if (err < 0)
+                        return err;
+                return len;
+        }
+        if (strncmp(line, "base=", 5))
+                return -EINVAL;
+        base = simple_strtoull(line + 5, &ptr, 0);
+        for (; isspace(*ptr); ++ptr) ;
+        if (strncmp(ptr, "size=", 5))
+                return -EINVAL;
+        size = simple_strtoull(ptr + 5, &ptr, 0);
+        if ((base & 0xfff) || (size & 0xfff))
+                return -EINVAL;
+        for (; isspace(*ptr); ++ptr) ;
+        if (strncmp(ptr, "type=", 5))
+                return -EINVAL;
+        ptr += 5;
+        for (; isspace(*ptr); ++ptr) ;
+        for (i = 0; i < MTRR_NUM_TYPES; ++i) {
+                if (strcmp(ptr, mtrr_strings[i]))
+                        continue;
+                base >>= PAGE_SHIFT;
+                size >>= PAGE_SHIFT;
+                err =
+                    mtrr_add_page((unsigned long) base, (unsigned long) size, i,
+                                  1);
+                if (err < 0)
+                        return err;
+                return len;
+        }
+        return -EINVAL;
+}
+
+static int
+mtrr_ioctl(struct inode *inode, struct file *file,
+           unsigned int cmd, unsigned long __arg)
+{
+        int err;
+        mtrr_type type;
+        struct mtrr_sentry sentry;
+        struct mtrr_gentry gentry;
+        void __user *arg = (void __user *) __arg;
+
+        switch (cmd) {
+        default:
+                return -ENOTTY;
+        case MTRRIOC_ADD_ENTRY:
+                if (!capable(CAP_SYS_ADMIN))
+                        return -EPERM;
+                if (copy_from_user(&sentry, arg, sizeof sentry))
+                        return -EFAULT;
+                err =
+                    mtrr_file_add(sentry.base, sentry.size, sentry.type, 1,
+                                  file, 0);
+                if (err < 0)
+                        return err;
+                break;
+        case MTRRIOC_SET_ENTRY:
+                if (!capable(CAP_SYS_ADMIN))
+                        return -EPERM;
+                if (copy_from_user(&sentry, arg, sizeof sentry))
+                        return -EFAULT;
+                err = mtrr_add(sentry.base, sentry.size, sentry.type, 0);
+                if (err < 0)
+                        return err;
+                break;
+        case MTRRIOC_DEL_ENTRY:
+                if (!capable(CAP_SYS_ADMIN))
+                        return -EPERM;
+                if (copy_from_user(&sentry, arg, sizeof sentry))
+                        return -EFAULT;
+                err = mtrr_file_del(sentry.base, sentry.size, file, 0);
+                if (err < 0)
+                        return err;
+                break;
+        case MTRRIOC_KILL_ENTRY:
+                if (!capable(CAP_SYS_ADMIN))
+                        return -EPERM;
+                if (copy_from_user(&sentry, arg, sizeof sentry))
+                        return -EFAULT;
+                err = mtrr_del(-1, sentry.base, sentry.size);
+                if (err < 0)
+                        return err;
+                break;
+        case MTRRIOC_GET_ENTRY:
+                if (copy_from_user(&gentry, arg, sizeof gentry))
+                        return -EFAULT;
+                if (gentry.regnum >= num_var_ranges)
+                        return -EINVAL;
+                mtrr_if->get(gentry.regnum, &gentry.base, &gentry.size, &type);
+
+                /* Hide entries that go above 4GB */
+                if (gentry.base + gentry.size > 0x100000
+                    || gentry.size == 0x100000)
+                        gentry.base = gentry.size = gentry.type = 0;
+                else {
+                        gentry.base <<= PAGE_SHIFT;
+                        gentry.size <<= PAGE_SHIFT;
+                        gentry.type = type;
+                }
+
+                if (copy_to_user(arg, &gentry, sizeof gentry))
+                        return -EFAULT;
+                break;
+        case MTRRIOC_ADD_PAGE_ENTRY:
+                if (!capable(CAP_SYS_ADMIN))
+                        return -EPERM;
+                if (copy_from_user(&sentry, arg, sizeof sentry))
+                        return -EFAULT;
+                err =
+                    mtrr_file_add(sentry.base, sentry.size, sentry.type, 1,
+                                  file, 1);
+                if (err < 0)
+                        return err;
+                break;
+        case MTRRIOC_SET_PAGE_ENTRY:
+                if (!capable(CAP_SYS_ADMIN))
+                        return -EPERM;
+                if (copy_from_user(&sentry, arg, sizeof sentry))
+                        return -EFAULT;
+                err = mtrr_add_page(sentry.base, sentry.size, sentry.type, 0);
+                if (err < 0)
+                        return err;
+                break;
+        case MTRRIOC_DEL_PAGE_ENTRY:
+                if (!capable(CAP_SYS_ADMIN))
+                        return -EPERM;
+                if (copy_from_user(&sentry, arg, sizeof sentry))
+                        return -EFAULT;
+                err = mtrr_file_del(sentry.base, sentry.size, file, 1);
+                if (err < 0)
+                        return err;
+                break;
+        case MTRRIOC_KILL_PAGE_ENTRY:
+                if (!capable(CAP_SYS_ADMIN))
+                        return -EPERM;
+                if (copy_from_user(&sentry, arg, sizeof sentry))
+                        return -EFAULT;
+                err = mtrr_del_page(-1, sentry.base, sentry.size);
+                if (err < 0)
+                        return err;
+                break;
+        case MTRRIOC_GET_PAGE_ENTRY:
+                if (copy_from_user(&gentry, arg, sizeof gentry))
+                        return -EFAULT;
+                if (gentry.regnum >= num_var_ranges)
+                        return -EINVAL;
+                mtrr_if->get(gentry.regnum, &gentry.base, &gentry.size, &type);
+                gentry.type = type;
+
+                if (copy_to_user(arg, &gentry, sizeof gentry))
+                        return -EFAULT;
+                break;
+        }
+        return 0;
+}
+
+static int
+mtrr_close(struct inode *ino, struct file *file)
+{
+        int i, max;
+        unsigned int *fcount = FILE_FCOUNT(file);
+
+        if (fcount != NULL) {
+                max = num_var_ranges;
+                for (i = 0; i < max; ++i) {
+                        while (fcount[i] > 0) {
+                                mtrr_del(i, 0, 0);
+                                --fcount[i];
+                        }
+                }
+                kfree(fcount);
+                FILE_FCOUNT(file) = NULL;
+        }
+        return single_release(ino, file);
+}
+
+static int mtrr_seq_show(struct seq_file *seq, void *offset);
+
+static int mtrr_open(struct inode *inode, struct file *file)
+{
+        if (!mtrr_if) 
+                return -EIO;
+        if (!mtrr_if->get) 
+                return -ENXIO; 
+        return single_open(file, mtrr_seq_show, NULL);
+}
+
+static struct file_operations mtrr_fops = {
+        .owner   = THIS_MODULE,
+        .open    = mtrr_open, 
+        .read    = seq_read,
+        .llseek  = seq_lseek,
+        .write   = mtrr_write,
+        .ioctl   = mtrr_ioctl,
+        .release = mtrr_close,
+};
+
+
+static struct proc_dir_entry *proc_root_mtrr;
+
+
+static int mtrr_seq_show(struct seq_file *seq, void *offset)
+{
+        char factor;
+        int i, max, len;
+        mtrr_type type;
+        unsigned long base;
+        unsigned int size;
+
+        len = 0;
+        max = num_var_ranges;
+        for (i = 0; i < max; i++) {
+                mtrr_if->get(i, &base, &size, &type);
+                if (size == 0)
+                        usage_table[i] = 0;
+                else {
+                        if (size < (0x100000 >> PAGE_SHIFT)) {
+                                /* less than 1MB */
+                                factor = 'K';
+                                size <<= PAGE_SHIFT - 10;
+                        } else {
+                                factor = 'M';
+                                size >>= 20 - PAGE_SHIFT;
+                        }
+                        /* RED-PEN: base can be > 32bit */ 
+                        len += seq_printf(seq, 
+                                   "reg%02i: base=0x%05lx000 (%4liMB), size=%4i%cB: %s, count=%d\n",
+                             i, base, base >> (20 - PAGE_SHIFT), size, factor,
+                             mtrr_attrib_to_str(type), usage_table[i]);
+                }
+        }
+        return 0;
+}
+
+static int __init mtrr_if_init(void)
+{
+        struct cpuinfo_x86 *c = &boot_cpu_data;
+
+        if ((!cpu_has(c, X86_FEATURE_MTRR)) &&
+            (!cpu_has(c, X86_FEATURE_K6_MTRR)) &&
+            (!cpu_has(c, X86_FEATURE_CYRIX_ARR)) &&
+            (!cpu_has(c, X86_FEATURE_CENTAUR_MCR)))
+                return -ENODEV;
+
+        proc_root_mtrr =
+            create_proc_entry("mtrr", S_IWUSR | S_IRUGO, &proc_root);
+        if (proc_root_mtrr) {
+                proc_root_mtrr->owner = THIS_MODULE;
+                proc_root_mtrr->proc_fops = &mtrr_fops;
+        }
+        return 0;
+}
+
+arch_initcall(mtrr_if_init);
+#endif                  /*  CONFIG_PROC_FS  */
diff --git a/arch/i386/kernel/cpu/mtrr/main.c b/arch/i386/kernel/cpu/mtrr/main.c
new file mode 100644
index 000000000000..8f67b490a7fd
--- /dev/null
+++ b/arch/i386/kernel/cpu/mtrr/main.c
@@ -0,0 +1,693 @@
+/*  Generic MTRR (Memory Type Range Register) driver.
+
+    Copyright (C) 1997-2000  Richard Gooch
+    Copyright (c) 2002       Patrick Mochel
+
+    This library is free software; you can redistribute it and/or
+    modify it under the terms of the GNU Library General Public
+    License as published by the Free Software Foundation; either
+    version 2 of the License, or (at your option) any later version.
+
+    This library is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    Library General Public License for more details.
+
+    You should have received a copy of the GNU Library General Public
+    License along with this library; if not, write to the Free
+    Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+    Richard Gooch may be reached by email at  rgooch@atnf.csiro.au
+    The postal address is:
+      Richard Gooch, c/o ATNF, P. O. Box 76, Epping, N.S.W., 2121, Australia.
+
+    Source: "Pentium Pro Family Developer's Manual, Volume 3:
+    Operating System Writer's Guide" (Intel document number 242692),
+    section 11.11.7
+
+    This was cleaned and made readable by Patrick Mochel <mochel@osdl.org> 
+    on 6-7 March 2002. 
+    Source: Intel Architecture Software Developers Manual, Volume 3: 
+    System Programming Guide; Section 9.11. (1997 edition - PPro).
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/smp.h>
+#include <linux/cpu.h>
+
+#include <asm/mtrr.h>
+
+#include <asm/uaccess.h>
+#include <asm/processor.h>
+#include <asm/msr.h>
+#include "mtrr.h"
+
+#define MTRR_VERSION            "2.0 (20020519)"
+
+u32 num_var_ranges = 0;
+
+unsigned int *usage_table;
+static DECLARE_MUTEX(main_lock);
+
+u32 size_or_mask, size_and_mask;
+
+static struct mtrr_ops * mtrr_ops[X86_VENDOR_NUM] = {};
+
+struct mtrr_ops * mtrr_if = NULL;
+
+static void set_mtrr(unsigned int reg, unsigned long base,
+                     unsigned long size, mtrr_type type);
+
+extern int arr3_protected;
+
+void set_mtrr_ops(struct mtrr_ops * ops)
+{
+        if (ops->vendor && ops->vendor < X86_VENDOR_NUM)
+                mtrr_ops[ops->vendor] = ops;
+}
+
+/*  Returns non-zero if we have the write-combining memory type  */
+static int have_wrcomb(void)
+{
+        struct pci_dev *dev;
+        
+        if ((dev = pci_get_class(PCI_CLASS_BRIDGE_HOST << 8, NULL)) != NULL) {
+                /* ServerWorks LE chipsets have problems with write-combining 
+                   Don't allow it and leave room for other chipsets to be tagged */
+                if (dev->vendor == PCI_VENDOR_ID_SERVERWORKS &&
+                    dev->device == PCI_DEVICE_ID_SERVERWORKS_LE) {
+                        printk(KERN_INFO "mtrr: Serverworks LE detected. Write-combining disabled.\n");
+                        pci_dev_put(dev);
+                        return 0;
+                }
+                /* Intel 450NX errata # 23. Non ascending cachline evictions to
+                   write combining memory may resulting in data corruption */
+                if (dev->vendor == PCI_VENDOR_ID_INTEL &&
+                    dev->device == PCI_DEVICE_ID_INTEL_82451NX) {
+                        printk(KERN_INFO "mtrr: Intel 450NX MMC detected. Write-combining disabled.\n");
+                        pci_dev_put(dev);
+                        return 0;
+                }
+                pci_dev_put(dev);
+        }               
+        return (mtrr_if->have_wrcomb ? mtrr_if->have_wrcomb() : 0);
+}
+
+/*  This function returns the number of variable MTRRs  */
+static void __init set_num_var_ranges(void)
+{
+        unsigned long config = 0, dummy;
+
+        if (use_intel()) {
+                rdmsr(MTRRcap_MSR, config, dummy);
+        } else if (is_cpu(AMD))
+                config = 2;
+        else if (is_cpu(CYRIX) || is_cpu(CENTAUR))
+                config = 8;
+        num_var_ranges = config & 0xff;
+}
+
+static void __init init_table(void)
+{
+        int i, max;
+
+        max = num_var_ranges;
+        if ((usage_table = kmalloc(max * sizeof *usage_table, GFP_KERNEL))
+            == NULL) {
+                printk(KERN_ERR "mtrr: could not allocate\n");
+                return;
+        }
+        for (i = 0; i < max; i++)
+                usage_table[i] = 1;
+}
+
+struct set_mtrr_data {
+        atomic_t        count;
+        atomic_t        gate;
+        unsigned long   smp_base;
+        unsigned long   smp_size;
+        unsigned int    smp_reg;
+        mtrr_type       smp_type;
+};
+
+#ifdef CONFIG_SMP
+
+static void ipi_handler(void *info)
+/*  [SUMMARY] Synchronisation handler. Executed by "other" CPUs.
+    [RETURNS] Nothing.
+*/
+{
+        struct set_mtrr_data *data = info;
+        unsigned long flags;
+
+        local_irq_save(flags);
+
+        atomic_dec(&data->count);
+        while(!atomic_read(&data->gate))
+                cpu_relax();
+
+        /*  The master has cleared me to execute  */
+        if (data->smp_reg != ~0U) 
+                mtrr_if->set(data->smp_reg, data->smp_base, 
+                             data->smp_size, data->smp_type);
+        else
+                mtrr_if->set_all();
+
+        atomic_dec(&data->count);
+        while(atomic_read(&data->gate))
+                cpu_relax();
+
+        atomic_dec(&data->count);
+        local_irq_restore(flags);
+}
+
+#endif
+
+/**
+ * set_mtrr - update mtrrs on all processors
+ * @reg:        mtrr in question
+ * @base:       mtrr base
+ * @size:       mtrr size
+ * @type:       mtrr type
+ *
+ * This is kinda tricky, but fortunately, Intel spelled it out for us cleanly:
+ * 
+ * 1. Send IPI to do the following:
+ * 2. Disable Interrupts
+ * 3. Wait for all procs to do so 
+ * 4. Enter no-fill cache mode
+ * 5. Flush caches
+ * 6. Clear PGE bit
+ * 7. Flush all TLBs
+ * 8. Disable all range registers
+ * 9. Update the MTRRs
+ * 10. Enable all range registers
+ * 11. Flush all TLBs and caches again
+ * 12. Enter normal cache mode and reenable caching
+ * 13. Set PGE 
+ * 14. Wait for buddies to catch up
+ * 15. Enable interrupts.
+ * 
+ * What does that mean for us? Well, first we set data.count to the number
+ * of CPUs. As each CPU disables interrupts, it'll decrement it once. We wait
+ * until it hits 0 and proceed. We set the data.gate flag and reset data.count.
+ * Meanwhile, they are waiting for that flag to be set. Once it's set, each 
+ * CPU goes through the transition of updating MTRRs. The CPU vendors may each do it 
+ * differently, so we call mtrr_if->set() callback and let them take care of it.
+ * When they're done, they again decrement data->count and wait for data.gate to 
+ * be reset. 
+ * When we finish, we wait for data.count to hit 0 and toggle the data.gate flag.
+ * Everyone then enables interrupts and we all continue on.
+ *
+ * Note that the mechanism is the same for UP systems, too; all the SMP stuff
+ * becomes nops.
+ */
+static void set_mtrr(unsigned int reg, unsigned long base,
+                     unsigned long size, mtrr_type type)
+{
+        struct set_mtrr_data data;
+        unsigned long flags;
+
+        data.smp_reg = reg;
+        data.smp_base = base;
+        data.smp_size = size;
+        data.smp_type = type;
+        atomic_set(&data.count, num_booting_cpus() - 1);
+        atomic_set(&data.gate,0);
+
+        /*  Start the ball rolling on other CPUs  */
+        if (smp_call_function(ipi_handler, &data, 1, 0) != 0)
+                panic("mtrr: timed out waiting for other CPUs\n");
+
+        local_irq_save(flags);
+
+        while(atomic_read(&data.count))
+                cpu_relax();
+
+        /* ok, reset count and toggle gate */
+        atomic_set(&data.count, num_booting_cpus() - 1);
+        atomic_set(&data.gate,1);
+
+        /* do our MTRR business */
+
+        /* HACK!
+         * We use this same function to initialize the mtrrs on boot.
+         * The state of the boot cpu's mtrrs has been saved, and we want
+         * to replicate across all the APs. 
+         * If we're doing that @reg is set to something special...
+         */
+        if (reg != ~0U) 
+                mtrr_if->set(reg,base,size,type);
+
+        /* wait for the others */
+        while(atomic_read(&data.count))
+                cpu_relax();
+
+        atomic_set(&data.count, num_booting_cpus() - 1);
+        atomic_set(&data.gate,0);
+
+        /*
+         * Wait here for everyone to have seen the gate change
+         * So we're the last ones to touch 'data'
+         */
+        while(atomic_read(&data.count))
+                cpu_relax();
+
+        local_irq_restore(flags);
+}
+
+/**
+ *      mtrr_add_page - Add a memory type region
+ *      @base: Physical base address of region in pages (4 KB)
+ *      @size: Physical size of region in pages (4 KB)
+ *      @type: Type of MTRR desired
+ *      @increment: If this is true do usage counting on the region
+ *
+ *      Memory type region registers control the caching on newer Intel and
+ *      non Intel processors. This function allows drivers to request an
+ *      MTRR is added. The details and hardware specifics of each processor's
+ *      implementation are hidden from the caller, but nevertheless the 
+ *      caller should expect to need to provide a power of two size on an
+ *      equivalent power of two boundary.
+ *
+ *      If the region cannot be added either because all regions are in use
+ *      or the CPU cannot support it a negative value is returned. On success
+ *      the register number for this entry is returned, but should be treated
+ *      as a cookie only.
+ *
+ *      On a multiprocessor machine the changes are made to all processors.
+ *      This is required on x86 by the Intel processors.
+ *
+ *      The available types are
+ *
+ *      %MTRR_TYPE_UNCACHABLE   -       No caching
+ *
+ *      %MTRR_TYPE_WRBACK       -       Write data back in bursts whenever
+ *
+ *      %MTRR_TYPE_WRCOMB       -       Write data back soon but allow bursts
+ *
+ *      %MTRR_TYPE_WRTHROUGH    -       Cache reads but not writes
+ *
+ *      BUGS: Needs a quiet flag for the cases where drivers do not mind
+ *      failures and do not wish system log messages to be sent.
+ */
+
+int mtrr_add_page(unsigned long base, unsigned long size, 
+                  unsigned int type, char increment)
+{
+        int i;
+        mtrr_type ltype;
+        unsigned long lbase;
+        unsigned int lsize;
+        int error;
+
+        if (!mtrr_if)
+                return -ENXIO;
+                
+        if ((error = mtrr_if->validate_add_page(base,size,type)))
+                return error;
+
+        if (type >= MTRR_NUM_TYPES) {
+                printk(KERN_WARNING "mtrr: type: %u invalid\n", type);
+                return -EINVAL;
+        }
+
+        /*  If the type is WC, check that this processor supports it  */
+        if ((type == MTRR_TYPE_WRCOMB) && !have_wrcomb()) {
+                printk(KERN_WARNING
+                       "mtrr: your processor doesn't support write-combining\n");
+                return -ENOSYS;
+        }
+
+        if (base & size_or_mask || size & size_or_mask) {
+                printk(KERN_WARNING "mtrr: base or size exceeds the MTRR width\n");
+                return -EINVAL;
+        }
+
+        error = -EINVAL;
+
+        /*  Search for existing MTRR  */
+        down(&main_lock);
+        for (i = 0; i < num_var_ranges; ++i) {
+                mtrr_if->get(i, &lbase, &lsize, &ltype);
+                if (base >= lbase + lsize)
+                        continue;
+                if ((base < lbase) && (base + size <= lbase))
+                        continue;
+                /*  At this point we know there is some kind of overlap/enclosure  */
+                if ((base < lbase) || (base + size > lbase + lsize)) {
+                        printk(KERN_WARNING
+                               "mtrr: 0x%lx000,0x%lx000 overlaps existing"
+                               " 0x%lx000,0x%x000\n", base, size, lbase,
+                               lsize);
+                        goto out;
+                }
+                /*  New region is enclosed by an existing region  */
+                if (ltype != type) {
+                        if (type == MTRR_TYPE_UNCACHABLE)
+                                continue;
+                        printk (KERN_WARNING "mtrr: type mismatch for %lx000,%lx000 old: %s new: %s\n",
+                             base, size, mtrr_attrib_to_str(ltype),
+                             mtrr_attrib_to_str(type));
+                        goto out;
+                }
+                if (increment)
+                        ++usage_table[i];
+                error = i;
+                goto out;
+        }
+        /*  Search for an empty MTRR  */
+        i = mtrr_if->get_free_region(base, size);
+        if (i >= 0) {
+                set_mtrr(i, base, size, type);
+                usage_table[i] = 1;
+        } else
+                printk(KERN_INFO "mtrr: no more MTRRs available\n");
+        error = i;
+ out:
+        up(&main_lock);
+        return error;
+}
+
+/**
+ *      mtrr_add - Add a memory type region
+ *      @base: Physical base address of region
+ *      @size: Physical size of region
+ *      @type: Type of MTRR desired
+ *      @increment: If this is true do usage counting on the region
+ *
+ *      Memory type region registers control the caching on newer Intel and
+ *      non Intel processors. This function allows drivers to request an
+ *      MTRR is added. The details and hardware specifics of each processor's
+ *      implementation are hidden from the caller, but nevertheless the 
+ *      caller should expect to need to provide a power of two size on an
+ *      equivalent power of two boundary.
+ *
+ *      If the region cannot be added either because all regions are in use
+ *      or the CPU cannot support it a negative value is returned. On success
+ *      the register number for this entry is returned, but should be treated
+ *      as a cookie only.
+ *
+ *      On a multiprocessor machine the changes are made to all processors.
+ *      This is required on x86 by the Intel processors.
+ *
+ *      The available types are
+ *
+ *      %MTRR_TYPE_UNCACHABLE   -       No caching
+ *
+ *      %MTRR_TYPE_WRBACK       -       Write data back in bursts whenever
+ *
+ *      %MTRR_TYPE_WRCOMB       -       Write data back soon but allow bursts
+ *
+ *      %MTRR_TYPE_WRTHROUGH    -       Cache reads but not writes
+ *
+ *      BUGS: Needs a quiet flag for the cases where drivers do not mind
+ *      failures and do not wish system log messages to be sent.
+ */
+
+int
+mtrr_add(unsigned long base, unsigned long size, unsigned int type,
+         char increment)
+{
+        if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1))) {
+                printk(KERN_WARNING "mtrr: size and base must be multiples of 4 kiB\n");
+                printk(KERN_DEBUG "mtrr: size: 0x%lx  base: 0x%lx\n", size, base);
+                return -EINVAL;
+        }
+        return mtrr_add_page(base >> PAGE_SHIFT, size >> PAGE_SHIFT, type,
+                             increment);
+}
+
+/**
+ *      mtrr_del_page - delete a memory type region
+ *      @reg: Register returned by mtrr_add
+ *      @base: Physical base address
+ *      @size: Size of region
+ *
+ *      If register is supplied then base and size are ignored. This is
+ *      how drivers should call it.
+ *
+ *      Releases an MTRR region. If the usage count drops to zero the 
+ *      register is freed and the region returns to default state.
+ *      On success the register is returned, on failure a negative error
+ *      code.
+ */
+
+int mtrr_del_page(int reg, unsigned long base, unsigned long size)
+{
+        int i, max;
+        mtrr_type ltype;
+        unsigned long lbase;
+        unsigned int lsize;
+        int error = -EINVAL;
+
+        if (!mtrr_if)
+                return -ENXIO;
+
+        max = num_var_ranges;
+        down(&main_lock);
+        if (reg < 0) {
+                /*  Search for existing MTRR  */
+                for (i = 0; i < max; ++i) {
+                        mtrr_if->get(i, &lbase, &lsize, &ltype);
+                        if (lbase == base && lsize == size) {
+                                reg = i;
+                                break;
+                        }
+                }
+                if (reg < 0) {
+                        printk(KERN_DEBUG "mtrr: no MTRR for %lx000,%lx000 found\n", base,
+                               size);
+                        goto out;
+                }
+        }
+        if (reg >= max) {
+                printk(KERN_WARNING "mtrr: register: %d too big\n", reg);
+                goto out;
+        }
+        if (is_cpu(CYRIX) && !use_intel()) {
+                if ((reg == 3) && arr3_protected) {
+                        printk(KERN_WARNING "mtrr: ARR3 cannot be changed\n");
+                        goto out;
+                }
+        }
+        mtrr_if->get(reg, &lbase, &lsize, &ltype);
+        if (lsize < 1) {
+                printk(KERN_WARNING "mtrr: MTRR %d not used\n", reg);
+                goto out;
+        }
+        if (usage_table[reg] < 1) {
+                printk(KERN_WARNING "mtrr: reg: %d has count=0\n", reg);
+                goto out;
+        }
+        if (--usage_table[reg] < 1)
+                set_mtrr(reg, 0, 0, 0);
+        error = reg;
+ out:
+        up(&main_lock);
+        return error;
+}
+/**
+ *      mtrr_del - delete a memory type region
+ *      @reg: Register returned by mtrr_add
+ *      @base: Physical base address
+ *      @size: Size of region
+ *
+ *      If register is supplied then base and size are ignored. This is
+ *      how drivers should call it.
+ *
+ *      Releases an MTRR region. If the usage count drops to zero the 
+ *      register is freed and the region returns to default state.
+ *      On success the register is returned, on failure a negative error
+ *      code.
+ */
+
+int
+mtrr_del(int reg, unsigned long base, unsigned long size)
+{
+        if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1))) {
+                printk(KERN_INFO "mtrr: size and base must be multiples of 4 kiB\n");
+                printk(KERN_DEBUG "mtrr: size: 0x%lx  base: 0x%lx\n", size, base);
+                return -EINVAL;
+        }
+        return mtrr_del_page(reg, base >> PAGE_SHIFT, size >> PAGE_SHIFT);
+}
+
+EXPORT_SYMBOL(mtrr_add);
+EXPORT_SYMBOL(mtrr_del);
+
+/* HACK ALERT!
+ * These should be called implicitly, but we can't yet until all the initcall
+ * stuff is done...
+ */
+extern void amd_init_mtrr(void);
+extern void cyrix_init_mtrr(void);
+extern void centaur_init_mtrr(void);
+
+static void __init init_ifs(void)
+{
+        amd_init_mtrr();
+        cyrix_init_mtrr();
+        centaur_init_mtrr();
+}
+
+static void __init init_other_cpus(void)
+{
+        if (use_intel())
+                get_mtrr_state();
+
+        /* bring up the other processors */
+        set_mtrr(~0U,0,0,0);
+
+        if (use_intel()) {
+                finalize_mtrr_state();
+                mtrr_state_warn();
+        }
+}
+
+
+struct mtrr_value {
+        mtrr_type       ltype;
+        unsigned long   lbase;
+        unsigned int    lsize;
+};
+
+static struct mtrr_value * mtrr_state;
+
+static int mtrr_save(struct sys_device * sysdev, u32 state)
+{
+        int i;
+        int size = num_var_ranges * sizeof(struct mtrr_value);
+
+        mtrr_state = kmalloc(size,GFP_ATOMIC);
+        if (mtrr_state)
+                memset(mtrr_state,0,size);
+        else
+                return -ENOMEM;
+
+        for (i = 0; i < num_var_ranges; i++) {
+                mtrr_if->get(i,
+                             &mtrr_state[i].lbase,
+                             &mtrr_state[i].lsize,
+                             &mtrr_state[i].ltype);
+        }
+        return 0;
+}
+
+static int mtrr_restore(struct sys_device * sysdev)
+{
+        int i;
+
+        for (i = 0; i < num_var_ranges; i++) {
+                if (mtrr_state[i].lsize) 
+                        set_mtrr(i,
+                                 mtrr_state[i].lbase,
+                                 mtrr_state[i].lsize,
+                                 mtrr_state[i].ltype);
+        }
+        kfree(mtrr_state);
+        return 0;
+}
+
+
+
+static struct sysdev_driver mtrr_sysdev_driver = {
+        .suspend        = mtrr_save,
+        .resume         = mtrr_restore,
+};
+
+
+/**
+ * mtrr_init - initialize mtrrs on the boot CPU
+ *
+ * This needs to be called early; before any of the other CPUs are 
+ * initialized (i.e. before smp_init()).
+ * 
+ */
+static int __init mtrr_init(void)
+{
+        init_ifs();
+
+        if (cpu_has_mtrr) {
+                mtrr_if = &generic_mtrr_ops;
+                size_or_mask = 0xff000000;      /* 36 bits */
+                size_and_mask = 0x00f00000;
+                        
+                switch (boot_cpu_data.x86_vendor) {
+                case X86_VENDOR_AMD:
+                        /* The original Athlon docs said that
+                           total addressable memory is 44 bits wide.
+                           It was not really clear whether its MTRRs
+                           follow this or not. (Read: 44 or 36 bits).
+                           However, "x86-64_overview.pdf" explicitly
+                           states that "previous implementations support
+                           36 bit MTRRs" and also provides a way to
+                           query the width (in bits) of the physical
+                           addressable memory on the Hammer family.
+                         */
+                        if (boot_cpu_data.x86 == 15
+                            && (cpuid_eax(0x80000000) >= 0x80000008)) {
+                                u32 phys_addr;
+                                phys_addr = cpuid_eax(0x80000008) & 0xff;
+                                size_or_mask =
+                                    ~((1 << (phys_addr - PAGE_SHIFT)) - 1);
+                                size_and_mask = ~size_or_mask & 0xfff00000;
+                        }
+                        /* Athlon MTRRs use an Intel-compatible interface for 
+                         * getting and setting */
+                        break;
+                case X86_VENDOR_CENTAUR:
+                        if (boot_cpu_data.x86 == 6) {
+                                /* VIA Cyrix family have Intel style MTRRs, but don't support PAE */
+                                size_or_mask = 0xfff00000;      /* 32 bits */
+                                size_and_mask = 0;
+                        }
+                        break;
+                
+                default:
+                        break;
+                }
+        } else {
+                switch (boot_cpu_data.x86_vendor) {
+                case X86_VENDOR_AMD:
+                        if (cpu_has_k6_mtrr) {
+                                /* Pre-Athlon (K6) AMD CPU MTRRs */
+                                mtrr_if = mtrr_ops[X86_VENDOR_AMD];
+                                size_or_mask = 0xfff00000;      /* 32 bits */
+                                size_and_mask = 0;
+                        }
+                        break;
+                case X86_VENDOR_CENTAUR:
+                        if (cpu_has_centaur_mcr) {
+                                mtrr_if = mtrr_ops[X86_VENDOR_CENTAUR];
+                                size_or_mask = 0xfff00000;      /* 32 bits */
+                                size_and_mask = 0;
+                        }
+                        break;
+                case X86_VENDOR_CYRIX:
+                        if (cpu_has_cyrix_arr) {
+                                mtrr_if = mtrr_ops[X86_VENDOR_CYRIX];
+                                size_or_mask = 0xfff00000;      /* 32 bits */
+                                size_and_mask = 0;
+                        }
+                        break;
+                default:
+                        break;
+                }
+        }
+        printk(KERN_INFO "mtrr: v%s\n",MTRR_VERSION);
+
+        if (mtrr_if) {
+                set_num_var_ranges();
+                init_table();
+                init_other_cpus();
+
+                return sysdev_driver_register(&cpu_sysdev_class,
+                                              &mtrr_sysdev_driver);
+        }
+        return -ENXIO;
+}
+
+subsys_initcall(mtrr_init);
diff --git a/arch/i386/kernel/cpu/mtrr/mtrr.h b/arch/i386/kernel/cpu/mtrr/mtrr.h
new file mode 100644
index 000000000000..de1351245599
--- /dev/null
+++ b/arch/i386/kernel/cpu/mtrr/mtrr.h
@@ -0,0 +1,98 @@
+/*
+ * local mtrr defines.
+ */
+
+#ifndef TRUE
+#define TRUE  1
+#define FALSE 0
+#endif
+
+#define MTRRcap_MSR     0x0fe
+#define MTRRdefType_MSR 0x2ff
+
+#define MTRRphysBase_MSR(reg) (0x200 + 2 * (reg))
+#define MTRRphysMask_MSR(reg) (0x200 + 2 * (reg) + 1)
+
+#define NUM_FIXED_RANGES 88
+#define MTRRfix64K_00000_MSR 0x250
+#define MTRRfix16K_80000_MSR 0x258
+#define MTRRfix16K_A0000_MSR 0x259
+#define MTRRfix4K_C0000_MSR 0x268
+#define MTRRfix4K_C8000_MSR 0x269
+#define MTRRfix4K_D0000_MSR 0x26a
+#define MTRRfix4K_D8000_MSR 0x26b
+#define MTRRfix4K_E0000_MSR 0x26c
+#define MTRRfix4K_E8000_MSR 0x26d
+#define MTRRfix4K_F0000_MSR 0x26e
+#define MTRRfix4K_F8000_MSR 0x26f
+
+#define MTRR_CHANGE_MASK_FIXED     0x01
+#define MTRR_CHANGE_MASK_VARIABLE  0x02
+#define MTRR_CHANGE_MASK_DEFTYPE   0x04
+
+/* In the Intel processor's MTRR interface, the MTRR type is always held in
+   an 8 bit field: */
+typedef u8 mtrr_type;
+
+struct mtrr_ops {
+        u32     vendor;
+        u32     use_intel_if;
+//      void    (*init)(void);
+        void    (*set)(unsigned int reg, unsigned long base,
+                       unsigned long size, mtrr_type type);
+        void    (*set_all)(void);
+
+        void    (*get)(unsigned int reg, unsigned long *base,
+                       unsigned int *size, mtrr_type * type);
+        int     (*get_free_region) (unsigned long base, unsigned long size);
+
+        int     (*validate_add_page)(unsigned long base, unsigned long size,
+                                     unsigned int type);
+        int     (*have_wrcomb)(void);
+};
+
+extern int generic_get_free_region(unsigned long base, unsigned long size);
+extern int generic_validate_add_page(unsigned long base, unsigned long size,
+                                     unsigned int type);
+
+extern struct mtrr_ops generic_mtrr_ops;
+
+extern int positive_have_wrcomb(void);
+
+/* library functions for processor-specific routines */
+struct set_mtrr_context {
+        unsigned long flags;
+        unsigned long deftype_lo;
+        unsigned long deftype_hi;
+        unsigned long cr4val;
+        unsigned long ccr3;
+};
+
+struct mtrr_var_range {
+        unsigned long base_lo;
+        unsigned long base_hi;
+        unsigned long mask_lo;
+        unsigned long mask_hi;
+};
+
+void set_mtrr_done(struct set_mtrr_context *ctxt);
+void set_mtrr_cache_disable(struct set_mtrr_context *ctxt);
+void set_mtrr_prepare_save(struct set_mtrr_context *ctxt);
+
+void get_mtrr_state(void);
+
+extern void set_mtrr_ops(struct mtrr_ops * ops);
+
+extern u32 size_or_mask, size_and_mask;
+extern struct mtrr_ops * mtrr_if;
+
+#define is_cpu(vnd)     (mtrr_if && mtrr_if->vendor == X86_VENDOR_##vnd)
+#define use_intel()     (mtrr_if && mtrr_if->use_intel_if == 1)
+
+extern unsigned int num_var_ranges;
+
+void finalize_mtrr_state(void);
+void mtrr_state_warn(void);
+char *mtrr_attrib_to_str(int x);
+void mtrr_wrmsr(unsigned, unsigned, unsigned);
+
diff --git a/arch/i386/kernel/cpu/mtrr/state.c b/arch/i386/kernel/cpu/mtrr/state.c
new file mode 100644
index 000000000000..f62ecd15811a
--- /dev/null
+++ b/arch/i386/kernel/cpu/mtrr/state.c
@@ -0,0 +1,78 @@
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/mtrr.h>
+#include <asm/msr.h>
+#include "mtrr.h"
+
+
+/*  Put the processor into a state where MTRRs can be safely set  */
+void set_mtrr_prepare_save(struct set_mtrr_context *ctxt)
+{
+        unsigned int cr0;
+
+        /*  Disable interrupts locally  */
+        local_irq_save(ctxt->flags);
+
+        if (use_intel() || is_cpu(CYRIX)) {
+
+                /*  Save value of CR4 and clear Page Global Enable (bit 7)  */
+                if ( cpu_has_pge ) {
+                        ctxt->cr4val = read_cr4();
+                        write_cr4(ctxt->cr4val & (unsigned char) ~(1 << 7));
+                }
+
+                /*  Disable and flush caches. Note that wbinvd flushes the TLBs as
+                    a side-effect  */
+                cr0 = read_cr0() | 0x40000000;
+                wbinvd();
+                write_cr0(cr0);
+                wbinvd();
+
+                if (use_intel())
+                        /*  Save MTRR state */
+                        rdmsr(MTRRdefType_MSR, ctxt->deftype_lo, ctxt->deftype_hi);
+                else
+                        /* Cyrix ARRs - everything else were excluded at the top */
+                        ctxt->ccr3 = getCx86(CX86_CCR3);
+        }
+}
+
+void set_mtrr_cache_disable(struct set_mtrr_context *ctxt)
+{
+        if (use_intel()) 
+                /*  Disable MTRRs, and set the default type to uncached  */
+                mtrr_wrmsr(MTRRdefType_MSR, ctxt->deftype_lo & 0xf300UL,
+                      ctxt->deftype_hi);
+        else if (is_cpu(CYRIX))
+                /* Cyrix ARRs - everything else were excluded at the top */
+                setCx86(CX86_CCR3, (ctxt->ccr3 & 0x0f) | 0x10);
+}
+
+/*  Restore the processor after a set_mtrr_prepare  */
+void set_mtrr_done(struct set_mtrr_context *ctxt)
+{
+        if (use_intel() || is_cpu(CYRIX)) {
+
+                /*  Flush caches and TLBs  */
+                wbinvd();
+
+                /*  Restore MTRRdefType  */
+                if (use_intel())
+                        /* Intel (P6) standard MTRRs */
+                        mtrr_wrmsr(MTRRdefType_MSR, ctxt->deftype_lo, ctxt->deftype_hi);
+                else
+                        /* Cyrix ARRs - everything else was excluded at the top */
+                        setCx86(CX86_CCR3, ctxt->ccr3);
+                
+                /*  Enable caches  */
+                write_cr0(read_cr0() & 0xbfffffff);
+
+                /*  Restore value of CR4  */
+                if ( cpu_has_pge )
+                        write_cr4(ctxt->cr4val);
+        }
+        /*  Re-enable interrupts locally (if enabled previously)  */
+        local_irq_restore(ctxt->flags);
+}
+
diff --git a/arch/i386/kernel/cpu/nexgen.c b/arch/i386/kernel/cpu/nexgen.c
new file mode 100644
index 000000000000..30898a260a5c
--- /dev/null
+++ b/arch/i386/kernel/cpu/nexgen.c
@@ -0,0 +1,63 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <asm/processor.h>
+
+#include "cpu.h"
+
+/*
+ *      Detect a NexGen CPU running without BIOS hypercode new enough
+ *      to have CPUID. (Thanks to Herbert Oppmann)
+ */
+ 
+static int __init deep_magic_nexgen_probe(void)
+{
+        int ret;
+        
+        __asm__ __volatile__ (
+                "       movw    $0x5555, %%ax\n"
+                "       xorw    %%dx,%%dx\n"
+                "       movw    $2, %%cx\n"
+                "       divw    %%cx\n"
+                "       movl    $0, %%eax\n"
+                "       jnz     1f\n"
+                "       movl    $1, %%eax\n"
+                "1:\n" 
+                : "=a" (ret) : : "cx", "dx" );
+        return  ret;
+}
+
+static void __init init_nexgen(struct cpuinfo_x86 * c)
+{
+        c->x86_cache_size = 256; /* A few had 1 MB... */
+}
+
+static void __init nexgen_identify(struct cpuinfo_x86 * c)
+{
+        /* Detect NexGen with old hypercode */
+        if ( deep_magic_nexgen_probe() ) {
+                strcpy(c->x86_vendor_id, "NexGenDriven");
+        }
+        generic_identify(c);
+}
+
+static struct cpu_dev nexgen_cpu_dev __initdata = {
+        .c_vendor       = "Nexgen",
+        .c_ident        = { "NexGenDriven" },
+        .c_models = {
+                        { .vendor = X86_VENDOR_NEXGEN,
+                          .family = 5,
+                          .model_names = { [1] = "Nx586" }
+                        },
+        },
+        .c_init         = init_nexgen,
+        .c_identify     = nexgen_identify,
+};
+
+int __init nexgen_init_cpu(void)
+{
+        cpu_devs[X86_VENDOR_NEXGEN] = &nexgen_cpu_dev;
+        return 0;
+}
+
+//early_arch_initcall(nexgen_init_cpu);
diff --git a/arch/i386/kernel/cpu/proc.c b/arch/i386/kernel/cpu/proc.c
new file mode 100644
index 000000000000..c8d83fdc237a
--- /dev/null
+++ b/arch/i386/kernel/cpu/proc.c
@@ -0,0 +1,149 @@
+#include <linux/smp.h>
+#include <linux/timex.h>
+#include <linux/string.h>
+#include <asm/semaphore.h>
+#include <linux/seq_file.h>
+
+/*
+ *      Get CPU information for use by the procfs.
+ */
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+        /* 
+         * These flag bits must match the definitions in <asm/cpufeature.h>.
+         * NULL means this bit is undefined or reserved; either way it doesn't
+         * have meaning as far as Linux is concerned.  Note that it's important
+         * to realize there is a difference between this table and CPUID -- if
+         * applications want to get the raw CPUID data, they should access
+         * /dev/cpu/<cpu_nr>/cpuid instead.
+         */
+        static char *x86_cap_flags[] = {
+                /* Intel-defined */
+                "fpu", "vme", "de", "pse", "tsc", "msr", "pae", "mce",
+                "cx8", "apic", NULL, "sep", "mtrr", "pge", "mca", "cmov",
+                "pat", "pse36", "pn", "clflush", NULL, "dts", "acpi", "mmx",
+                "fxsr", "sse", "sse2", "ss", "ht", "tm", "ia64", "pbe",
+
+                /* AMD-defined */
+                "pni", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+                NULL, NULL, NULL, "syscall", NULL, NULL, NULL, NULL,
+                NULL, NULL, NULL, "mp", "nx", NULL, "mmxext", NULL,
+                NULL, "fxsr_opt", NULL, NULL, NULL, "lm", "3dnowext", "3dnow",
+
+                /* Transmeta-defined */
+                "recovery", "longrun", NULL, "lrti", NULL, NULL, NULL, NULL,
+                NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+                NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+                NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+
+                /* Other (Linux-defined) */
+                "cxmmx", "k6_mtrr", "cyrix_arr", "centaur_mcr",
+                NULL, NULL, NULL, NULL,
+                NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+                NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+                NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+
+                /* Intel-defined (#2) */
+                "pni", NULL, NULL, "monitor", "ds_cpl", NULL, NULL, "est",
+                "tm2", NULL, "cid", NULL, NULL, "cx16", "xtpr", NULL,
+                NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+                NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+
+                /* VIA/Cyrix/Centaur-defined */
+                NULL, NULL, "rng", "rng_en", NULL, NULL, "ace", "ace_en",
+                NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+                NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+                NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+
+                /* AMD-defined (#2) */
+                "lahf_lm", "cmp_legacy", NULL, NULL, NULL, NULL, NULL, NULL,
+                NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+                NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+                NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+        };
+        struct cpuinfo_x86 *c = v;
+        int i, n = c - cpu_data;
+        int fpu_exception;
+
+#ifdef CONFIG_SMP
+        if (!cpu_online(n))
+                return 0;
+#endif
+        seq_printf(m, "processor\t: %d\n"
+                "vendor_id\t: %s\n"
+                "cpu family\t: %d\n"
+                "model\t\t: %d\n"
+                "model name\t: %s\n",
+                n,
+                c->x86_vendor_id[0] ? c->x86_vendor_id : "unknown",
+                c->x86,
+                c->x86_model,
+                c->x86_model_id[0] ? c->x86_model_id : "unknown");
+
+        if (c->x86_mask || c->cpuid_level >= 0)
+                seq_printf(m, "stepping\t: %d\n", c->x86_mask);
+        else
+                seq_printf(m, "stepping\t: unknown\n");
+
+        if ( cpu_has(c, X86_FEATURE_TSC) ) {
+                seq_printf(m, "cpu MHz\t\t: %lu.%03lu\n",
+                        cpu_khz / 1000, (cpu_khz % 1000));
+        }
+
+        /* Cache size */
+        if (c->x86_cache_size >= 0)
+                seq_printf(m, "cache size\t: %d KB\n", c->x86_cache_size);
+#ifdef CONFIG_X86_HT
+        seq_printf(m, "physical id\t: %d\n", phys_proc_id[n]);
+        seq_printf(m, "siblings\t: %d\n", c->x86_num_cores * smp_num_siblings);
+#endif
+        
+        /* We use exception 16 if we have hardware math and we've either seen it or the CPU claims it is internal */
+        fpu_exception = c->hard_math && (ignore_fpu_irq || cpu_has_fpu);
+        seq_printf(m, "fdiv_bug\t: %s\n"
+                        "hlt_bug\t\t: %s\n"
+                        "f00f_bug\t: %s\n"
+                        "coma_bug\t: %s\n"
+                        "fpu\t\t: %s\n"
+                        "fpu_exception\t: %s\n"
+                        "cpuid level\t: %d\n"
+                        "wp\t\t: %s\n"
+                        "flags\t\t:",
+                     c->fdiv_bug ? "yes" : "no",
+                     c->hlt_works_ok ? "no" : "yes",
+                     c->f00f_bug ? "yes" : "no",
+                     c->coma_bug ? "yes" : "no",
+                     c->hard_math ? "yes" : "no",
+                     fpu_exception ? "yes" : "no",
+                     c->cpuid_level,
+                     c->wp_works_ok ? "yes" : "no");
+
+        for ( i = 0 ; i < 32*NCAPINTS ; i++ )
+                if ( test_bit(i, c->x86_capability) &&
+                     x86_cap_flags[i] != NULL )
+                        seq_printf(m, " %s", x86_cap_flags[i]);
+
+        seq_printf(m, "\nbogomips\t: %lu.%02lu\n\n",
+                     c->loops_per_jiffy/(500000/HZ),
+                     (c->loops_per_jiffy/(5000/HZ)) % 100);
+        return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+        return *pos < NR_CPUS ? cpu_data + *pos : NULL;
+}
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+        ++*pos;
+        return c_start(m, pos);
+}
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+struct seq_operations cpuinfo_op = {
+        .start  = c_start,
+        .next   = c_next,
+        .stop   = c_stop,
+        .show   = show_cpuinfo,
+};
diff --git a/arch/i386/kernel/cpu/rise.c b/arch/i386/kernel/cpu/rise.c
new file mode 100644
index 000000000000..8602425628ca
--- /dev/null
+++ b/arch/i386/kernel/cpu/rise.c
@@ -0,0 +1,53 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <asm/processor.h>
+
+#include "cpu.h"
+
+static void __init init_rise(struct cpuinfo_x86 *c)
+{
+        printk("CPU: Rise iDragon");
+        if (c->x86_model > 2)
+                printk(" II");
+        printk("\n");
+
+        /* Unhide possibly hidden capability flags
+           The mp6 iDragon family don't have MSRs.
+           We switch on extra features with this cpuid weirdness: */
+        __asm__ (
+                "movl $0x6363452a, %%eax\n\t"
+                "movl $0x3231206c, %%ecx\n\t"
+                "movl $0x2a32313a, %%edx\n\t"
+                "cpuid\n\t"
+                "movl $0x63634523, %%eax\n\t"
+                "movl $0x32315f6c, %%ecx\n\t"
+                "movl $0x2333313a, %%edx\n\t"
+                "cpuid\n\t" : : : "eax", "ebx", "ecx", "edx"
+        );
+        set_bit(X86_FEATURE_CX8, c->x86_capability);
+}
+
+static struct cpu_dev rise_cpu_dev __initdata = {
+        .c_vendor       = "Rise",
+        .c_ident        = { "RiseRiseRise" },
+        .c_models = {
+                { .vendor = X86_VENDOR_RISE, .family = 5, .model_names = 
+                  { 
+                          [0] = "iDragon", 
+                          [2] = "iDragon", 
+                          [8] = "iDragon II", 
+                          [9] = "iDragon II"
+                  }
+                },
+        },
+        .c_init         = init_rise,
+};
+
+int __init rise_init_cpu(void)
+{
+        cpu_devs[X86_VENDOR_RISE] = &rise_cpu_dev;
+        return 0;
+}
+
+//early_arch_initcall(rise_init_cpu);
diff --git a/arch/i386/kernel/cpu/transmeta.c b/arch/i386/kernel/cpu/transmeta.c
new file mode 100644
index 000000000000..f57e5ee94943
--- /dev/null
+++ b/arch/i386/kernel/cpu/transmeta.c
@@ -0,0 +1,107 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/processor.h>
+#include <asm/msr.h>
+#include "cpu.h"
+
+static void __init init_transmeta(struct cpuinfo_x86 *c)
+{
+        unsigned int cap_mask, uk, max, dummy;
+        unsigned int cms_rev1, cms_rev2;
+        unsigned int cpu_rev, cpu_freq, cpu_flags, new_cpu_rev;
+        char cpu_info[65];
+
+        get_model_name(c);      /* Same as AMD/Cyrix */
+        display_cacheinfo(c);
+
+        /* Print CMS and CPU revision */
+        max = cpuid_eax(0x80860000);
+        cpu_rev = 0;
+        if ( max >= 0x80860001 ) {
+                cpuid(0x80860001, &dummy, &cpu_rev, &cpu_freq, &cpu_flags); 
+                if (cpu_rev != 0x02000000) {
+                        printk(KERN_INFO "CPU: Processor revision %u.%u.%u.%u, %u MHz\n",
+                                (cpu_rev >> 24) & 0xff,
+                                (cpu_rev >> 16) & 0xff,
+                                (cpu_rev >> 8) & 0xff,
+                                cpu_rev & 0xff,
+                                cpu_freq);
+                }
+        }
+        if ( max >= 0x80860002 ) {
+                cpuid(0x80860002, &new_cpu_rev, &cms_rev1, &cms_rev2, &dummy);
+                if (cpu_rev == 0x02000000) {
+                        printk(KERN_INFO "CPU: Processor revision %08X, %u MHz\n",
+                                new_cpu_rev, cpu_freq);
+                }
+                printk(KERN_INFO "CPU: Code Morphing Software revision %u.%u.%u-%u-%u\n",
+                       (cms_rev1 >> 24) & 0xff,
+                       (cms_rev1 >> 16) & 0xff,
+                       (cms_rev1 >> 8) & 0xff,
+                       cms_rev1 & 0xff,
+                       cms_rev2);
+        }
+        if ( max >= 0x80860006 ) {
+                cpuid(0x80860003,
+                      (void *)&cpu_info[0],
+                      (void *)&cpu_info[4],
+                      (void *)&cpu_info[8],
+                      (void *)&cpu_info[12]);
+                cpuid(0x80860004,
+                      (void *)&cpu_info[16],
+                      (void *)&cpu_info[20],
+                      (void *)&cpu_info[24],
+                      (void *)&cpu_info[28]);
+                cpuid(0x80860005,
+                      (void *)&cpu_info[32],
+                      (void *)&cpu_info[36],
+                      (void *)&cpu_info[40],
+                      (void *)&cpu_info[44]);
+                cpuid(0x80860006,
+                      (void *)&cpu_info[48],
+                      (void *)&cpu_info[52],
+                      (void *)&cpu_info[56],
+                      (void *)&cpu_info[60]);
+                cpu_info[64] = '\0';
+                printk(KERN_INFO "CPU: %s\n", cpu_info);
+        }
+
+        /* Unhide possibly hidden capability flags */
+        rdmsr(0x80860004, cap_mask, uk);
+        wrmsr(0x80860004, ~0, uk);
+        c->x86_capability[0] = cpuid_edx(0x00000001);
+        wrmsr(0x80860004, cap_mask, uk);
+        
+        /* If we can run i686 user-space code, call us an i686 */
+#define USER686 (X86_FEATURE_TSC|X86_FEATURE_CX8|X86_FEATURE_CMOV)
+        if ( c->x86 == 5 && (c->x86_capability[0] & USER686) == USER686 )
+                c->x86 = 6;
+}
+
+static void transmeta_identify(struct cpuinfo_x86 * c)
+{
+        u32 xlvl;
+        generic_identify(c);
+
+        /* Transmeta-defined flags: level 0x80860001 */
+        xlvl = cpuid_eax(0x80860000);
+        if ( (xlvl & 0xffff0000) == 0x80860000 ) {
+                if (  xlvl >= 0x80860001 )
+                        c->x86_capability[2] = cpuid_edx(0x80860001);
+        }
+}
+
+static struct cpu_dev transmeta_cpu_dev __initdata = {
+        .c_vendor       = "Transmeta",
+        .c_ident        = { "GenuineTMx86", "TransmetaCPU" },
+        .c_init         = init_transmeta,
+        .c_identify     = transmeta_identify,
+};
+
+int __init transmeta_init_cpu(void)
+{
+        cpu_devs[X86_VENDOR_TRANSMETA] = &transmeta_cpu_dev;
+        return 0;
+}
+
+//early_arch_initcall(transmeta_init_cpu);
diff --git a/arch/i386/kernel/cpu/umc.c b/arch/i386/kernel/cpu/umc.c
new file mode 100644
index 000000000000..264fcad559d5
--- /dev/null
+++ b/arch/i386/kernel/cpu/umc.c
@@ -0,0 +1,33 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/processor.h>
+#include "cpu.h"
+
+/* UMC chips appear to be only either 386 or 486, so no special init takes place.
+ */
+static void __init init_umc(struct cpuinfo_x86 * c)
+{
+
+}
+
+static struct cpu_dev umc_cpu_dev __initdata = {
+        .c_vendor       = "UMC",
+        .c_ident        = { "UMC UMC UMC" },
+        .c_models = {
+                { .vendor = X86_VENDOR_UMC, .family = 4, .model_names =
+                  { 
+                          [1] = "U5D", 
+                          [2] = "U5S", 
+                  }
+                },
+        },
+        .c_init         = init_umc,
+};
+
+int __init umc_init_cpu(void)
+{
+        cpu_devs[X86_VENDOR_UMC] = &umc_cpu_dev;
+        return 0;
+}
+
+//early_arch_initcall(umc_init_cpu);