diff options
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/configs/neocore926_defconfig | 1302 | ||||
-rw-r--r-- | arch/arm/mach-at91/Kconfig | 8 | ||||
-rw-r--r-- | arch/arm/mach-at91/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/mach-at91/board-neocore926.c | 397 |
4 files changed, 1707 insertions, 1 deletions
diff --git a/arch/arm/configs/neocore926_defconfig b/arch/arm/configs/neocore926_defconfig new file mode 100644 index 000000000000..325f1e105f69 --- /dev/null +++ b/arch/arm/configs/neocore926_defconfig | |||
@@ -0,0 +1,1302 @@ | |||
1 | # | ||
2 | # Automatically generated make config: don't edit | ||
3 | # Linux kernel version: 2.6.27-rc1 | ||
4 | # Tue Jul 29 10:46:54 2008 | ||
5 | # | ||
6 | CONFIG_ARM=y | ||
7 | CONFIG_SYS_SUPPORTS_APM_EMULATION=y | ||
8 | CONFIG_GENERIC_GPIO=y | ||
9 | CONFIG_GENERIC_TIME=y | ||
10 | CONFIG_GENERIC_CLOCKEVENTS=y | ||
11 | CONFIG_MMU=y | ||
12 | # CONFIG_NO_IOPORT is not set | ||
13 | CONFIG_GENERIC_HARDIRQS=y | ||
14 | CONFIG_STACKTRACE_SUPPORT=y | ||
15 | CONFIG_HAVE_LATENCYTOP_SUPPORT=y | ||
16 | CONFIG_LOCKDEP_SUPPORT=y | ||
17 | CONFIG_TRACE_IRQFLAGS_SUPPORT=y | ||
18 | CONFIG_HARDIRQS_SW_RESEND=y | ||
19 | CONFIG_GENERIC_IRQ_PROBE=y | ||
20 | CONFIG_RWSEM_GENERIC_SPINLOCK=y | ||
21 | # CONFIG_ARCH_HAS_ILOG2_U32 is not set | ||
22 | # CONFIG_ARCH_HAS_ILOG2_U64 is not set | ||
23 | CONFIG_GENERIC_HWEIGHT=y | ||
24 | CONFIG_GENERIC_CALIBRATE_DELAY=y | ||
25 | CONFIG_ARCH_SUPPORTS_AOUT=y | ||
26 | CONFIG_ZONE_DMA=y | ||
27 | CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y | ||
28 | CONFIG_VECTORS_BASE=0xffff0000 | ||
29 | CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" | ||
30 | |||
31 | # | ||
32 | # General setup | ||
33 | # | ||
34 | CONFIG_EXPERIMENTAL=y | ||
35 | CONFIG_BROKEN_ON_SMP=y | ||
36 | CONFIG_INIT_ENV_ARG_LIMIT=32 | ||
37 | CONFIG_LOCALVERSION="" | ||
38 | # CONFIG_LOCALVERSION_AUTO is not set | ||
39 | # CONFIG_SWAP is not set | ||
40 | CONFIG_SYSVIPC=y | ||
41 | CONFIG_SYSVIPC_SYSCTL=y | ||
42 | # CONFIG_POSIX_MQUEUE is not set | ||
43 | # CONFIG_BSD_PROCESS_ACCT is not set | ||
44 | # CONFIG_TASKSTATS is not set | ||
45 | # CONFIG_AUDIT is not set | ||
46 | # CONFIG_IKCONFIG is not set | ||
47 | CONFIG_LOG_BUF_SHIFT=17 | ||
48 | # CONFIG_CGROUPS is not set | ||
49 | # CONFIG_GROUP_SCHED is not set | ||
50 | # CONFIG_SYSFS_DEPRECATED_V2 is not set | ||
51 | # CONFIG_RELAY is not set | ||
52 | CONFIG_NAMESPACES=y | ||
53 | # CONFIG_UTS_NS is not set | ||
54 | # CONFIG_IPC_NS is not set | ||
55 | # CONFIG_USER_NS is not set | ||
56 | # CONFIG_PID_NS is not set | ||
57 | CONFIG_BLK_DEV_INITRD=y | ||
58 | CONFIG_INITRAMFS_SOURCE="" | ||
59 | CONFIG_CC_OPTIMIZE_FOR_SIZE=y | ||
60 | CONFIG_SYSCTL=y | ||
61 | # CONFIG_EMBEDDED is not set | ||
62 | CONFIG_UID16=y | ||
63 | CONFIG_SYSCTL_SYSCALL=y | ||
64 | CONFIG_SYSCTL_SYSCALL_CHECK=y | ||
65 | CONFIG_KALLSYMS=y | ||
66 | # CONFIG_KALLSYMS_EXTRA_PASS is not set | ||
67 | CONFIG_HOTPLUG=y | ||
68 | CONFIG_PRINTK=y | ||
69 | CONFIG_BUG=y | ||
70 | CONFIG_ELF_CORE=y | ||
71 | # CONFIG_COMPAT_BRK is not set | ||
72 | CONFIG_BASE_FULL=y | ||
73 | CONFIG_FUTEX=y | ||
74 | CONFIG_ANON_INODES=y | ||
75 | CONFIG_EPOLL=y | ||
76 | CONFIG_SIGNALFD=y | ||
77 | CONFIG_TIMERFD=y | ||
78 | CONFIG_EVENTFD=y | ||
79 | CONFIG_SHMEM=y | ||
80 | CONFIG_VM_EVENT_COUNTERS=y | ||
81 | CONFIG_SLUB_DEBUG=y | ||
82 | # CONFIG_SLAB is not set | ||
83 | CONFIG_SLUB=y | ||
84 | # CONFIG_SLOB is not set | ||
85 | # CONFIG_PROFILING is not set | ||
86 | # CONFIG_MARKERS is not set | ||
87 | CONFIG_HAVE_OPROFILE=y | ||
88 | # CONFIG_KPROBES is not set | ||
89 | # CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set | ||
90 | # CONFIG_HAVE_IOREMAP_PROT is not set | ||
91 | CONFIG_HAVE_KPROBES=y | ||
92 | CONFIG_HAVE_KRETPROBES=y | ||
93 | # CONFIG_HAVE_ARCH_TRACEHOOK is not set | ||
94 | # CONFIG_HAVE_DMA_ATTRS is not set | ||
95 | # CONFIG_USE_GENERIC_SMP_HELPERS is not set | ||
96 | CONFIG_HAVE_CLK=y | ||
97 | CONFIG_PROC_PAGE_MONITOR=y | ||
98 | CONFIG_HAVE_GENERIC_DMA_COHERENT=y | ||
99 | CONFIG_SLABINFO=y | ||
100 | CONFIG_RT_MUTEXES=y | ||
101 | # CONFIG_TINY_SHMEM is not set | ||
102 | CONFIG_BASE_SMALL=0 | ||
103 | CONFIG_MODULES=y | ||
104 | # CONFIG_MODULE_FORCE_LOAD is not set | ||
105 | CONFIG_MODULE_UNLOAD=y | ||
106 | # CONFIG_MODULE_FORCE_UNLOAD is not set | ||
107 | # CONFIG_MODVERSIONS is not set | ||
108 | # CONFIG_MODULE_SRCVERSION_ALL is not set | ||
109 | CONFIG_KMOD=y | ||
110 | CONFIG_BLOCK=y | ||
111 | # CONFIG_LBD is not set | ||
112 | # CONFIG_BLK_DEV_IO_TRACE is not set | ||
113 | # CONFIG_LSF is not set | ||
114 | # CONFIG_BLK_DEV_BSG is not set | ||
115 | # CONFIG_BLK_DEV_INTEGRITY is not set | ||
116 | |||
117 | # | ||
118 | # IO Schedulers | ||
119 | # | ||
120 | CONFIG_IOSCHED_NOOP=y | ||
121 | # CONFIG_IOSCHED_AS is not set | ||
122 | # CONFIG_IOSCHED_DEADLINE is not set | ||
123 | # CONFIG_IOSCHED_CFQ is not set | ||
124 | # CONFIG_DEFAULT_AS is not set | ||
125 | # CONFIG_DEFAULT_DEADLINE is not set | ||
126 | # CONFIG_DEFAULT_CFQ is not set | ||
127 | CONFIG_DEFAULT_NOOP=y | ||
128 | CONFIG_DEFAULT_IOSCHED="noop" | ||
129 | CONFIG_CLASSIC_RCU=y | ||
130 | |||
131 | # | ||
132 | # System Type | ||
133 | # | ||
134 | # CONFIG_ARCH_AAEC2000 is not set | ||
135 | # CONFIG_ARCH_INTEGRATOR is not set | ||
136 | # CONFIG_ARCH_REALVIEW is not set | ||
137 | # CONFIG_ARCH_VERSATILE is not set | ||
138 | CONFIG_ARCH_AT91=y | ||
139 | # CONFIG_ARCH_CLPS7500 is not set | ||
140 | # CONFIG_ARCH_CLPS711X is not set | ||
141 | # CONFIG_ARCH_EBSA110 is not set | ||
142 | # CONFIG_ARCH_EP93XX is not set | ||
143 | # CONFIG_ARCH_FOOTBRIDGE is not set | ||
144 | # CONFIG_ARCH_NETX is not set | ||
145 | # CONFIG_ARCH_H720X is not set | ||
146 | # CONFIG_ARCH_IMX is not set | ||
147 | # CONFIG_ARCH_IOP13XX is not set | ||
148 | # CONFIG_ARCH_IOP32X is not set | ||
149 | # CONFIG_ARCH_IOP33X is not set | ||
150 | # CONFIG_ARCH_IXP23XX is not set | ||
151 | # CONFIG_ARCH_IXP2000 is not set | ||
152 | # CONFIG_ARCH_IXP4XX is not set | ||
153 | # CONFIG_ARCH_L7200 is not set | ||
154 | # CONFIG_ARCH_KIRKWOOD is not set | ||
155 | # CONFIG_ARCH_KS8695 is not set | ||
156 | # CONFIG_ARCH_NS9XXX is not set | ||
157 | # CONFIG_ARCH_LOKI is not set | ||
158 | # CONFIG_ARCH_MV78XX0 is not set | ||
159 | # CONFIG_ARCH_MXC is not set | ||
160 | # CONFIG_ARCH_ORION5X is not set | ||
161 | # CONFIG_ARCH_PNX4008 is not set | ||
162 | # CONFIG_ARCH_PXA is not set | ||
163 | # CONFIG_ARCH_RPC is not set | ||
164 | # CONFIG_ARCH_SA1100 is not set | ||
165 | # CONFIG_ARCH_S3C2410 is not set | ||
166 | # CONFIG_ARCH_SHARK is not set | ||
167 | # CONFIG_ARCH_LH7A40X is not set | ||
168 | # CONFIG_ARCH_DAVINCI is not set | ||
169 | # CONFIG_ARCH_OMAP is not set | ||
170 | # CONFIG_ARCH_MSM7X00A is not set | ||
171 | |||
172 | # | ||
173 | # Boot options | ||
174 | # | ||
175 | |||
176 | # | ||
177 | # Power management | ||
178 | # | ||
179 | |||
180 | # | ||
181 | # Atmel AT91 System-on-Chip | ||
182 | # | ||
183 | # CONFIG_ARCH_AT91RM9200 is not set | ||
184 | # CONFIG_ARCH_AT91SAM9260 is not set | ||
185 | # CONFIG_ARCH_AT91SAM9261 is not set | ||
186 | CONFIG_ARCH_AT91SAM9263=y | ||
187 | # CONFIG_ARCH_AT91SAM9RL is not set | ||
188 | # CONFIG_ARCH_AT91SAM9G20 is not set | ||
189 | # CONFIG_ARCH_AT91CAP9 is not set | ||
190 | # CONFIG_ARCH_AT91X40 is not set | ||
191 | CONFIG_AT91_PMC_UNIT=y | ||
192 | |||
193 | # | ||
194 | # AT91SAM9263 Board Type | ||
195 | # | ||
196 | # CONFIG_MACH_AT91SAM9263EK is not set | ||
197 | # CONFIG_MACH_USB_A9263 is not set | ||
198 | CONFIG_MACH_NEOCORE926=y | ||
199 | |||
200 | # | ||
201 | # AT91 Board Options | ||
202 | # | ||
203 | CONFIG_MTD_AT91_DATAFLASH_CARD=y | ||
204 | |||
205 | # | ||
206 | # AT91 Feature Selections | ||
207 | # | ||
208 | # CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set | ||
209 | CONFIG_AT91_TIMER_HZ=100 | ||
210 | CONFIG_AT91_EARLY_DBGU=y | ||
211 | # CONFIG_AT91_EARLY_USART0 is not set | ||
212 | # CONFIG_AT91_EARLY_USART1 is not set | ||
213 | # CONFIG_AT91_EARLY_USART2 is not set | ||
214 | # CONFIG_AT91_EARLY_USART3 is not set | ||
215 | # CONFIG_AT91_EARLY_USART4 is not set | ||
216 | # CONFIG_AT91_EARLY_USART5 is not set | ||
217 | |||
218 | # | ||
219 | # Processor Type | ||
220 | # | ||
221 | CONFIG_CPU_32=y | ||
222 | CONFIG_CPU_ARM926T=y | ||
223 | CONFIG_CPU_32v5=y | ||
224 | CONFIG_CPU_ABRT_EV5TJ=y | ||
225 | CONFIG_CPU_PABRT_NOIFAR=y | ||
226 | CONFIG_CPU_CACHE_VIVT=y | ||
227 | CONFIG_CPU_COPY_V4WB=y | ||
228 | CONFIG_CPU_TLB_V4WBI=y | ||
229 | CONFIG_CPU_CP15=y | ||
230 | CONFIG_CPU_CP15_MMU=y | ||
231 | |||
232 | # | ||
233 | # Processor Features | ||
234 | # | ||
235 | CONFIG_ARM_THUMB=y | ||
236 | # CONFIG_CPU_ICACHE_DISABLE is not set | ||
237 | # CONFIG_CPU_DCACHE_DISABLE is not set | ||
238 | # CONFIG_CPU_DCACHE_WRITETHROUGH is not set | ||
239 | # CONFIG_CPU_CACHE_ROUND_ROBIN is not set | ||
240 | # CONFIG_OUTER_CACHE is not set | ||
241 | |||
242 | # | ||
243 | # Bus support | ||
244 | # | ||
245 | # CONFIG_PCI_SYSCALL is not set | ||
246 | # CONFIG_ARCH_SUPPORTS_MSI is not set | ||
247 | # CONFIG_PCCARD is not set | ||
248 | |||
249 | # | ||
250 | # Kernel Features | ||
251 | # | ||
252 | # CONFIG_TICK_ONESHOT is not set | ||
253 | # CONFIG_NO_HZ is not set | ||
254 | # CONFIG_HIGH_RES_TIMERS is not set | ||
255 | CONFIG_GENERIC_CLOCKEVENTS_BUILD=y | ||
256 | # CONFIG_PREEMPT is not set | ||
257 | CONFIG_HZ=100 | ||
258 | # CONFIG_AEABI is not set | ||
259 | # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set | ||
260 | CONFIG_SELECT_MEMORY_MODEL=y | ||
261 | CONFIG_FLATMEM_MANUAL=y | ||
262 | # CONFIG_DISCONTIGMEM_MANUAL is not set | ||
263 | # CONFIG_SPARSEMEM_MANUAL is not set | ||
264 | CONFIG_FLATMEM=y | ||
265 | CONFIG_FLAT_NODE_MEM_MAP=y | ||
266 | # CONFIG_SPARSEMEM_STATIC is not set | ||
267 | # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set | ||
268 | CONFIG_PAGEFLAGS_EXTENDED=y | ||
269 | CONFIG_SPLIT_PTLOCK_CPUS=4096 | ||
270 | # CONFIG_RESOURCES_64BIT is not set | ||
271 | CONFIG_ZONE_DMA_FLAG=1 | ||
272 | CONFIG_BOUNCE=y | ||
273 | CONFIG_VIRT_TO_BUS=y | ||
274 | # CONFIG_LEDS is not set | ||
275 | CONFIG_ALIGNMENT_TRAP=y | ||
276 | |||
277 | # | ||
278 | # Boot options | ||
279 | # | ||
280 | CONFIG_ZBOOT_ROM_TEXT=0x0 | ||
281 | CONFIG_ZBOOT_ROM_BSS=0x0 | ||
282 | CONFIG_CMDLINE="" | ||
283 | # CONFIG_XIP_KERNEL is not set | ||
284 | # CONFIG_KEXEC is not set | ||
285 | |||
286 | # | ||
287 | # Floating point emulation | ||
288 | # | ||
289 | |||
290 | # | ||
291 | # At least one emulation must be selected | ||
292 | # | ||
293 | CONFIG_FPE_NWFPE=y | ||
294 | # CONFIG_FPE_NWFPE_XP is not set | ||
295 | # CONFIG_FPE_FASTFPE is not set | ||
296 | # CONFIG_VFP is not set | ||
297 | |||
298 | # | ||
299 | # Userspace binary formats | ||
300 | # | ||
301 | CONFIG_BINFMT_ELF=y | ||
302 | # CONFIG_BINFMT_AOUT is not set | ||
303 | # CONFIG_BINFMT_MISC is not set | ||
304 | # CONFIG_ARTHUR is not set | ||
305 | |||
306 | # | ||
307 | # Power management options | ||
308 | # | ||
309 | # CONFIG_PM is not set | ||
310 | CONFIG_ARCH_SUSPEND_POSSIBLE=y | ||
311 | |||
312 | # | ||
313 | # Networking | ||
314 | # | ||
315 | CONFIG_NET=y | ||
316 | |||
317 | # | ||
318 | # Networking options | ||
319 | # | ||
320 | CONFIG_PACKET=y | ||
321 | # CONFIG_PACKET_MMAP is not set | ||
322 | CONFIG_UNIX=y | ||
323 | CONFIG_XFRM=y | ||
324 | # CONFIG_XFRM_USER is not set | ||
325 | # CONFIG_XFRM_SUB_POLICY is not set | ||
326 | # CONFIG_XFRM_MIGRATE is not set | ||
327 | # CONFIG_XFRM_STATISTICS is not set | ||
328 | CONFIG_NET_KEY=y | ||
329 | # CONFIG_NET_KEY_MIGRATE is not set | ||
330 | CONFIG_INET=y | ||
331 | # CONFIG_IP_MULTICAST is not set | ||
332 | # CONFIG_IP_ADVANCED_ROUTER is not set | ||
333 | CONFIG_IP_FIB_HASH=y | ||
334 | CONFIG_IP_PNP=y | ||
335 | CONFIG_IP_PNP_DHCP=y | ||
336 | CONFIG_IP_PNP_BOOTP=y | ||
337 | CONFIG_IP_PNP_RARP=y | ||
338 | CONFIG_NET_IPIP=y | ||
339 | # CONFIG_NET_IPGRE is not set | ||
340 | # CONFIG_ARPD is not set | ||
341 | # CONFIG_SYN_COOKIES is not set | ||
342 | # CONFIG_INET_AH is not set | ||
343 | # CONFIG_INET_ESP is not set | ||
344 | # CONFIG_INET_IPCOMP is not set | ||
345 | # CONFIG_INET_XFRM_TUNNEL is not set | ||
346 | CONFIG_INET_TUNNEL=y | ||
347 | CONFIG_INET_XFRM_MODE_TRANSPORT=y | ||
348 | CONFIG_INET_XFRM_MODE_TUNNEL=y | ||
349 | CONFIG_INET_XFRM_MODE_BEET=y | ||
350 | # CONFIG_INET_LRO is not set | ||
351 | CONFIG_INET_DIAG=y | ||
352 | CONFIG_INET_TCP_DIAG=y | ||
353 | # CONFIG_TCP_CONG_ADVANCED is not set | ||
354 | CONFIG_TCP_CONG_CUBIC=y | ||
355 | CONFIG_DEFAULT_TCP_CONG="cubic" | ||
356 | # CONFIG_TCP_MD5SIG is not set | ||
357 | CONFIG_IPV6=y | ||
358 | # CONFIG_IPV6_PRIVACY is not set | ||
359 | # CONFIG_IPV6_ROUTER_PREF is not set | ||
360 | # CONFIG_IPV6_OPTIMISTIC_DAD is not set | ||
361 | # CONFIG_INET6_AH is not set | ||
362 | # CONFIG_INET6_ESP is not set | ||
363 | # CONFIG_INET6_IPCOMP is not set | ||
364 | # CONFIG_IPV6_MIP6 is not set | ||
365 | # CONFIG_INET6_XFRM_TUNNEL is not set | ||
366 | # CONFIG_INET6_TUNNEL is not set | ||
367 | CONFIG_INET6_XFRM_MODE_TRANSPORT=y | ||
368 | CONFIG_INET6_XFRM_MODE_TUNNEL=y | ||
369 | CONFIG_INET6_XFRM_MODE_BEET=y | ||
370 | # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set | ||
371 | CONFIG_IPV6_SIT=y | ||
372 | CONFIG_IPV6_NDISC_NODETYPE=y | ||
373 | # CONFIG_IPV6_TUNNEL is not set | ||
374 | # CONFIG_IPV6_MULTIPLE_TABLES is not set | ||
375 | # CONFIG_IPV6_MROUTE is not set | ||
376 | # CONFIG_NETWORK_SECMARK is not set | ||
377 | # CONFIG_NETFILTER is not set | ||
378 | # CONFIG_IP_DCCP is not set | ||
379 | # CONFIG_IP_SCTP is not set | ||
380 | # CONFIG_TIPC is not set | ||
381 | # CONFIG_ATM is not set | ||
382 | # CONFIG_BRIDGE is not set | ||
383 | # CONFIG_VLAN_8021Q is not set | ||
384 | # CONFIG_DECNET is not set | ||
385 | # CONFIG_LLC2 is not set | ||
386 | # CONFIG_IPX is not set | ||
387 | # CONFIG_ATALK is not set | ||
388 | # CONFIG_X25 is not set | ||
389 | # CONFIG_LAPB is not set | ||
390 | # CONFIG_ECONET is not set | ||
391 | # CONFIG_WAN_ROUTER is not set | ||
392 | # CONFIG_NET_SCHED is not set | ||
393 | |||
394 | # | ||
395 | # Network testing | ||
396 | # | ||
397 | # CONFIG_NET_PKTGEN is not set | ||
398 | # CONFIG_HAMRADIO is not set | ||
399 | # CONFIG_CAN is not set | ||
400 | # CONFIG_IRDA is not set | ||
401 | # CONFIG_BT is not set | ||
402 | # CONFIG_AF_RXRPC is not set | ||
403 | |||
404 | # | ||
405 | # Wireless | ||
406 | # | ||
407 | # CONFIG_CFG80211 is not set | ||
408 | # CONFIG_WIRELESS_EXT is not set | ||
409 | # CONFIG_MAC80211 is not set | ||
410 | # CONFIG_IEEE80211 is not set | ||
411 | # CONFIG_RFKILL is not set | ||
412 | # CONFIG_NET_9P is not set | ||
413 | |||
414 | # | ||
415 | # Device Drivers | ||
416 | # | ||
417 | |||
418 | # | ||
419 | # Generic Driver Options | ||
420 | # | ||
421 | CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" | ||
422 | CONFIG_STANDALONE=y | ||
423 | # CONFIG_PREVENT_FIRMWARE_BUILD is not set | ||
424 | CONFIG_FW_LOADER=y | ||
425 | CONFIG_FIRMWARE_IN_KERNEL=y | ||
426 | CONFIG_EXTRA_FIRMWARE="" | ||
427 | # CONFIG_SYS_HYPERVISOR is not set | ||
428 | # CONFIG_CONNECTOR is not set | ||
429 | CONFIG_MTD=y | ||
430 | # CONFIG_MTD_DEBUG is not set | ||
431 | # CONFIG_MTD_CONCAT is not set | ||
432 | CONFIG_MTD_PARTITIONS=y | ||
433 | # CONFIG_MTD_REDBOOT_PARTS is not set | ||
434 | # CONFIG_MTD_CMDLINE_PARTS is not set | ||
435 | # CONFIG_MTD_AFS_PARTS is not set | ||
436 | # CONFIG_MTD_AR7_PARTS is not set | ||
437 | |||
438 | # | ||
439 | # User Modules And Translation Layers | ||
440 | # | ||
441 | CONFIG_MTD_CHAR=y | ||
442 | CONFIG_MTD_BLKDEVS=y | ||
443 | CONFIG_MTD_BLOCK=y | ||
444 | # CONFIG_FTL is not set | ||
445 | CONFIG_NFTL=y | ||
446 | CONFIG_NFTL_RW=y | ||
447 | # CONFIG_INFTL is not set | ||
448 | # CONFIG_RFD_FTL is not set | ||
449 | # CONFIG_SSFDC is not set | ||
450 | # CONFIG_MTD_OOPS is not set | ||
451 | |||
452 | # | ||
453 | # RAM/ROM/Flash chip drivers | ||
454 | # | ||
455 | # CONFIG_MTD_CFI is not set | ||
456 | # CONFIG_MTD_JEDECPROBE is not set | ||
457 | CONFIG_MTD_MAP_BANK_WIDTH_1=y | ||
458 | CONFIG_MTD_MAP_BANK_WIDTH_2=y | ||
459 | CONFIG_MTD_MAP_BANK_WIDTH_4=y | ||
460 | # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set | ||
461 | # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set | ||
462 | # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set | ||
463 | CONFIG_MTD_CFI_I1=y | ||
464 | CONFIG_MTD_CFI_I2=y | ||
465 | # CONFIG_MTD_CFI_I4 is not set | ||
466 | # CONFIG_MTD_CFI_I8 is not set | ||
467 | # CONFIG_MTD_RAM is not set | ||
468 | # CONFIG_MTD_ROM is not set | ||
469 | # CONFIG_MTD_ABSENT is not set | ||
470 | |||
471 | # | ||
472 | # Mapping drivers for chip access | ||
473 | # | ||
474 | # CONFIG_MTD_COMPLEX_MAPPINGS is not set | ||
475 | # CONFIG_MTD_PLATRAM is not set | ||
476 | |||
477 | # | ||
478 | # Self-contained MTD device drivers | ||
479 | # | ||
480 | # CONFIG_MTD_DATAFLASH is not set | ||
481 | # CONFIG_MTD_M25P80 is not set | ||
482 | # CONFIG_MTD_SLRAM is not set | ||
483 | # CONFIG_MTD_PHRAM is not set | ||
484 | # CONFIG_MTD_MTDRAM is not set | ||
485 | CONFIG_MTD_BLOCK2MTD=y | ||
486 | |||
487 | # | ||
488 | # Disk-On-Chip Device Drivers | ||
489 | # | ||
490 | # CONFIG_MTD_DOC2000 is not set | ||
491 | # CONFIG_MTD_DOC2001 is not set | ||
492 | # CONFIG_MTD_DOC2001PLUS is not set | ||
493 | CONFIG_MTD_NAND=y | ||
494 | CONFIG_MTD_NAND_VERIFY_WRITE=y | ||
495 | CONFIG_MTD_NAND_ECC_SMC=y | ||
496 | # CONFIG_MTD_NAND_MUSEUM_IDS is not set | ||
497 | CONFIG_MTD_NAND_IDS=y | ||
498 | # CONFIG_MTD_NAND_DISKONCHIP is not set | ||
499 | CONFIG_MTD_NAND_ATMEL=y | ||
500 | CONFIG_MTD_NAND_ATMEL_ECC_HW=y | ||
501 | # CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set | ||
502 | # CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set | ||
503 | # CONFIG_MTD_NAND_NANDSIM is not set | ||
504 | CONFIG_MTD_NAND_PLATFORM=y | ||
505 | # CONFIG_MTD_ALAUDA is not set | ||
506 | # CONFIG_MTD_ONENAND is not set | ||
507 | |||
508 | # | ||
509 | # UBI - Unsorted block images | ||
510 | # | ||
511 | # CONFIG_MTD_UBI is not set | ||
512 | # CONFIG_PARPORT is not set | ||
513 | CONFIG_BLK_DEV=y | ||
514 | # CONFIG_BLK_DEV_COW_COMMON is not set | ||
515 | CONFIG_BLK_DEV_LOOP=y | ||
516 | # CONFIG_BLK_DEV_CRYPTOLOOP is not set | ||
517 | CONFIG_BLK_DEV_NBD=y | ||
518 | # CONFIG_BLK_DEV_UB is not set | ||
519 | # CONFIG_BLK_DEV_RAM is not set | ||
520 | # CONFIG_CDROM_PKTCDVD is not set | ||
521 | # CONFIG_ATA_OVER_ETH is not set | ||
522 | CONFIG_MISC_DEVICES=y | ||
523 | CONFIG_ATMEL_PWM=y | ||
524 | CONFIG_ATMEL_TCLIB=y | ||
525 | CONFIG_ATMEL_TCB_CLKSRC=y | ||
526 | CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 | ||
527 | # CONFIG_EEPROM_93CX6 is not set | ||
528 | # CONFIG_ATMEL_SSC is not set | ||
529 | # CONFIG_ENCLOSURE_SERVICES is not set | ||
530 | CONFIG_HAVE_IDE=y | ||
531 | # CONFIG_IDE is not set | ||
532 | |||
533 | # | ||
534 | # SCSI device support | ||
535 | # | ||
536 | # CONFIG_RAID_ATTRS is not set | ||
537 | CONFIG_SCSI=y | ||
538 | CONFIG_SCSI_DMA=y | ||
539 | # CONFIG_SCSI_TGT is not set | ||
540 | # CONFIG_SCSI_NETLINK is not set | ||
541 | CONFIG_SCSI_PROC_FS=y | ||
542 | |||
543 | # | ||
544 | # SCSI support type (disk, tape, CD-ROM) | ||
545 | # | ||
546 | # CONFIG_BLK_DEV_SD is not set | ||
547 | # CONFIG_CHR_DEV_ST is not set | ||
548 | # CONFIG_CHR_DEV_OSST is not set | ||
549 | # CONFIG_BLK_DEV_SR is not set | ||
550 | CONFIG_CHR_DEV_SG=y | ||
551 | # CONFIG_CHR_DEV_SCH is not set | ||
552 | |||
553 | # | ||
554 | # Some SCSI devices (e.g. CD jukebox) support multiple LUNs | ||
555 | # | ||
556 | # CONFIG_SCSI_MULTI_LUN is not set | ||
557 | # CONFIG_SCSI_CONSTANTS is not set | ||
558 | # CONFIG_SCSI_LOGGING is not set | ||
559 | # CONFIG_SCSI_SCAN_ASYNC is not set | ||
560 | CONFIG_SCSI_WAIT_SCAN=m | ||
561 | |||
562 | # | ||
563 | # SCSI Transports | ||
564 | # | ||
565 | # CONFIG_SCSI_SPI_ATTRS is not set | ||
566 | # CONFIG_SCSI_FC_ATTRS is not set | ||
567 | # CONFIG_SCSI_ISCSI_ATTRS is not set | ||
568 | # CONFIG_SCSI_SAS_LIBSAS is not set | ||
569 | # CONFIG_SCSI_SRP_ATTRS is not set | ||
570 | CONFIG_SCSI_LOWLEVEL=y | ||
571 | # CONFIG_ISCSI_TCP is not set | ||
572 | # CONFIG_SCSI_DEBUG is not set | ||
573 | # CONFIG_SCSI_DH is not set | ||
574 | # CONFIG_ATA is not set | ||
575 | # CONFIG_MD is not set | ||
576 | CONFIG_NETDEVICES=y | ||
577 | # CONFIG_DUMMY is not set | ||
578 | # CONFIG_BONDING is not set | ||
579 | # CONFIG_MACVLAN is not set | ||
580 | # CONFIG_EQUALIZER is not set | ||
581 | # CONFIG_TUN is not set | ||
582 | # CONFIG_VETH is not set | ||
583 | CONFIG_PHYLIB=y | ||
584 | |||
585 | # | ||
586 | # MII PHY device drivers | ||
587 | # | ||
588 | # CONFIG_MARVELL_PHY is not set | ||
589 | # CONFIG_DAVICOM_PHY is not set | ||
590 | # CONFIG_QSEMI_PHY is not set | ||
591 | # CONFIG_LXT_PHY is not set | ||
592 | # CONFIG_CICADA_PHY is not set | ||
593 | # CONFIG_VITESSE_PHY is not set | ||
594 | CONFIG_SMSC_PHY=y | ||
595 | # CONFIG_BROADCOM_PHY is not set | ||
596 | # CONFIG_ICPLUS_PHY is not set | ||
597 | # CONFIG_REALTEK_PHY is not set | ||
598 | # CONFIG_FIXED_PHY is not set | ||
599 | # CONFIG_MDIO_BITBANG is not set | ||
600 | CONFIG_NET_ETHERNET=y | ||
601 | # CONFIG_MII is not set | ||
602 | CONFIG_MACB=y | ||
603 | # CONFIG_AX88796 is not set | ||
604 | # CONFIG_SMC91X is not set | ||
605 | # CONFIG_DM9000 is not set | ||
606 | # CONFIG_ENC28J60 is not set | ||
607 | # CONFIG_IBM_NEW_EMAC_ZMII is not set | ||
608 | # CONFIG_IBM_NEW_EMAC_RGMII is not set | ||
609 | # CONFIG_IBM_NEW_EMAC_TAH is not set | ||
610 | # CONFIG_IBM_NEW_EMAC_EMAC4 is not set | ||
611 | # CONFIG_B44 is not set | ||
612 | # CONFIG_NETDEV_1000 is not set | ||
613 | # CONFIG_NETDEV_10000 is not set | ||
614 | |||
615 | # | ||
616 | # Wireless LAN | ||
617 | # | ||
618 | # CONFIG_WLAN_PRE80211 is not set | ||
619 | # CONFIG_WLAN_80211 is not set | ||
620 | # CONFIG_IWLWIFI_LEDS is not set | ||
621 | |||
622 | # | ||
623 | # USB Network Adapters | ||
624 | # | ||
625 | # CONFIG_USB_CATC is not set | ||
626 | # CONFIG_USB_KAWETH is not set | ||
627 | # CONFIG_USB_PEGASUS is not set | ||
628 | # CONFIG_USB_RTL8150 is not set | ||
629 | # CONFIG_USB_USBNET is not set | ||
630 | # CONFIG_WAN is not set | ||
631 | # CONFIG_PPP is not set | ||
632 | # CONFIG_SLIP is not set | ||
633 | # CONFIG_NETCONSOLE is not set | ||
634 | # CONFIG_NETPOLL is not set | ||
635 | # CONFIG_NET_POLL_CONTROLLER is not set | ||
636 | # CONFIG_ISDN is not set | ||
637 | |||
638 | # | ||
639 | # Input device support | ||
640 | # | ||
641 | CONFIG_INPUT=y | ||
642 | # CONFIG_INPUT_FF_MEMLESS is not set | ||
643 | # CONFIG_INPUT_POLLDEV is not set | ||
644 | |||
645 | # | ||
646 | # Userland interfaces | ||
647 | # | ||
648 | CONFIG_INPUT_MOUSEDEV=y | ||
649 | # CONFIG_INPUT_MOUSEDEV_PSAUX is not set | ||
650 | CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 | ||
651 | CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 | ||
652 | # CONFIG_INPUT_JOYDEV is not set | ||
653 | CONFIG_INPUT_EVDEV=y | ||
654 | # CONFIG_INPUT_EVBUG is not set | ||
655 | |||
656 | # | ||
657 | # Input Device Drivers | ||
658 | # | ||
659 | CONFIG_INPUT_KEYBOARD=y | ||
660 | CONFIG_KEYBOARD_ATKBD=y | ||
661 | # CONFIG_KEYBOARD_SUNKBD is not set | ||
662 | # CONFIG_KEYBOARD_LKKBD is not set | ||
663 | # CONFIG_KEYBOARD_XTKBD is not set | ||
664 | # CONFIG_KEYBOARD_NEWTON is not set | ||
665 | # CONFIG_KEYBOARD_STOWAWAY is not set | ||
666 | # CONFIG_KEYBOARD_GPIO is not set | ||
667 | CONFIG_INPUT_MOUSE=y | ||
668 | CONFIG_MOUSE_PS2=y | ||
669 | CONFIG_MOUSE_PS2_ALPS=y | ||
670 | CONFIG_MOUSE_PS2_LOGIPS2PP=y | ||
671 | CONFIG_MOUSE_PS2_SYNAPTICS=y | ||
672 | CONFIG_MOUSE_PS2_LIFEBOOK=y | ||
673 | CONFIG_MOUSE_PS2_TRACKPOINT=y | ||
674 | # CONFIG_MOUSE_PS2_TOUCHKIT is not set | ||
675 | # CONFIG_MOUSE_SERIAL is not set | ||
676 | # CONFIG_MOUSE_APPLETOUCH is not set | ||
677 | # CONFIG_MOUSE_VSXXXAA is not set | ||
678 | # CONFIG_MOUSE_GPIO is not set | ||
679 | # CONFIG_INPUT_JOYSTICK is not set | ||
680 | # CONFIG_INPUT_TABLET is not set | ||
681 | CONFIG_INPUT_TOUCHSCREEN=y | ||
682 | CONFIG_TOUCHSCREEN_ADS7846=y | ||
683 | # CONFIG_TOUCHSCREEN_FUJITSU is not set | ||
684 | # CONFIG_TOUCHSCREEN_GUNZE is not set | ||
685 | # CONFIG_TOUCHSCREEN_ELO is not set | ||
686 | # CONFIG_TOUCHSCREEN_MTOUCH is not set | ||
687 | # CONFIG_TOUCHSCREEN_INEXIO is not set | ||
688 | # CONFIG_TOUCHSCREEN_MK712 is not set | ||
689 | # CONFIG_TOUCHSCREEN_PENMOUNT is not set | ||
690 | # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set | ||
691 | # CONFIG_TOUCHSCREEN_TOUCHWIN is not set | ||
692 | # CONFIG_TOUCHSCREEN_UCB1400 is not set | ||
693 | # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set | ||
694 | # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set | ||
695 | # CONFIG_INPUT_MISC is not set | ||
696 | |||
697 | # | ||
698 | # Hardware I/O ports | ||
699 | # | ||
700 | CONFIG_SERIO=y | ||
701 | CONFIG_SERIO_SERPORT=y | ||
702 | CONFIG_SERIO_LIBPS2=y | ||
703 | # CONFIG_SERIO_RAW is not set | ||
704 | # CONFIG_GAMEPORT is not set | ||
705 | |||
706 | # | ||
707 | # Character devices | ||
708 | # | ||
709 | CONFIG_VT=y | ||
710 | CONFIG_CONSOLE_TRANSLATIONS=y | ||
711 | CONFIG_VT_CONSOLE=y | ||
712 | CONFIG_HW_CONSOLE=y | ||
713 | CONFIG_VT_HW_CONSOLE_BINDING=y | ||
714 | # CONFIG_DEVKMEM is not set | ||
715 | CONFIG_SERIAL_NONSTANDARD=y | ||
716 | # CONFIG_N_HDLC is not set | ||
717 | # CONFIG_RISCOM8 is not set | ||
718 | # CONFIG_SPECIALIX is not set | ||
719 | # CONFIG_RIO is not set | ||
720 | # CONFIG_STALDRV is not set | ||
721 | |||
722 | # | ||
723 | # Serial drivers | ||
724 | # | ||
725 | # CONFIG_SERIAL_8250 is not set | ||
726 | |||
727 | # | ||
728 | # Non-8250 serial port support | ||
729 | # | ||
730 | CONFIG_SERIAL_ATMEL=y | ||
731 | CONFIG_SERIAL_ATMEL_CONSOLE=y | ||
732 | # CONFIG_SERIAL_ATMEL_PDC is not set | ||
733 | # CONFIG_SERIAL_ATMEL_TTYAT is not set | ||
734 | CONFIG_SERIAL_CORE=y | ||
735 | CONFIG_SERIAL_CORE_CONSOLE=y | ||
736 | CONFIG_UNIX98_PTYS=y | ||
737 | CONFIG_LEGACY_PTYS=y | ||
738 | CONFIG_LEGACY_PTY_COUNT=256 | ||
739 | # CONFIG_IPMI_HANDLER is not set | ||
740 | # CONFIG_HW_RANDOM is not set | ||
741 | # CONFIG_NVRAM is not set | ||
742 | # CONFIG_R3964 is not set | ||
743 | # CONFIG_RAW_DRIVER is not set | ||
744 | # CONFIG_TCG_TPM is not set | ||
745 | CONFIG_I2C=y | ||
746 | CONFIG_I2C_BOARDINFO=y | ||
747 | CONFIG_I2C_CHARDEV=y | ||
748 | |||
749 | # | ||
750 | # I2C Hardware Bus support | ||
751 | # | ||
752 | |||
753 | # | ||
754 | # I2C system bus drivers (mostly embedded / system-on-chip) | ||
755 | # | ||
756 | # CONFIG_I2C_GPIO is not set | ||
757 | # CONFIG_I2C_OCORES is not set | ||
758 | # CONFIG_I2C_SIMTEC is not set | ||
759 | |||
760 | # | ||
761 | # External I2C/SMBus adapter drivers | ||
762 | # | ||
763 | # CONFIG_I2C_PARPORT_LIGHT is not set | ||
764 | # CONFIG_I2C_TAOS_EVM is not set | ||
765 | # CONFIG_I2C_TINY_USB is not set | ||
766 | |||
767 | # | ||
768 | # Other I2C/SMBus bus drivers | ||
769 | # | ||
770 | # CONFIG_I2C_PCA_PLATFORM is not set | ||
771 | # CONFIG_I2C_STUB is not set | ||
772 | |||
773 | # | ||
774 | # Miscellaneous I2C Chip support | ||
775 | # | ||
776 | # CONFIG_DS1682 is not set | ||
777 | # CONFIG_AT24 is not set | ||
778 | # CONFIG_SENSORS_EEPROM is not set | ||
779 | # CONFIG_SENSORS_PCF8574 is not set | ||
780 | # CONFIG_PCF8575 is not set | ||
781 | # CONFIG_SENSORS_PCA9539 is not set | ||
782 | # CONFIG_SENSORS_PCF8591 is not set | ||
783 | # CONFIG_SENSORS_MAX6875 is not set | ||
784 | # CONFIG_SENSORS_TSL2550 is not set | ||
785 | # CONFIG_I2C_DEBUG_CORE is not set | ||
786 | # CONFIG_I2C_DEBUG_ALGO is not set | ||
787 | # CONFIG_I2C_DEBUG_BUS is not set | ||
788 | # CONFIG_I2C_DEBUG_CHIP is not set | ||
789 | CONFIG_SPI=y | ||
790 | CONFIG_SPI_MASTER=y | ||
791 | |||
792 | # | ||
793 | # SPI Master Controller Drivers | ||
794 | # | ||
795 | CONFIG_SPI_ATMEL=y | ||
796 | # CONFIG_SPI_BITBANG is not set | ||
797 | |||
798 | # | ||
799 | # SPI Protocol Masters | ||
800 | # | ||
801 | # CONFIG_SPI_AT25 is not set | ||
802 | # CONFIG_SPI_SPIDEV is not set | ||
803 | # CONFIG_SPI_TLE62X0 is not set | ||
804 | # CONFIG_W1 is not set | ||
805 | # CONFIG_POWER_SUPPLY is not set | ||
806 | # CONFIG_HWMON is not set | ||
807 | # CONFIG_WATCHDOG is not set | ||
808 | |||
809 | # | ||
810 | # Sonics Silicon Backplane | ||
811 | # | ||
812 | CONFIG_SSB_POSSIBLE=y | ||
813 | # CONFIG_SSB is not set | ||
814 | |||
815 | # | ||
816 | # Multifunction device drivers | ||
817 | # | ||
818 | # CONFIG_MFD_CORE is not set | ||
819 | # CONFIG_MFD_SM501 is not set | ||
820 | # CONFIG_HTC_PASIC3 is not set | ||
821 | |||
822 | # | ||
823 | # Multimedia devices | ||
824 | # | ||
825 | |||
826 | # | ||
827 | # Multimedia core support | ||
828 | # | ||
829 | # CONFIG_VIDEO_DEV is not set | ||
830 | # CONFIG_DVB_CORE is not set | ||
831 | # CONFIG_VIDEO_MEDIA is not set | ||
832 | |||
833 | # | ||
834 | # Multimedia drivers | ||
835 | # | ||
836 | # CONFIG_DAB is not set | ||
837 | |||
838 | # | ||
839 | # Graphics support | ||
840 | # | ||
841 | # CONFIG_VGASTATE is not set | ||
842 | CONFIG_VIDEO_OUTPUT_CONTROL=y | ||
843 | CONFIG_FB=y | ||
844 | # CONFIG_FIRMWARE_EDID is not set | ||
845 | # CONFIG_FB_DDC is not set | ||
846 | CONFIG_FB_CFB_FILLRECT=y | ||
847 | CONFIG_FB_CFB_COPYAREA=y | ||
848 | CONFIG_FB_CFB_IMAGEBLIT=y | ||
849 | # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set | ||
850 | # CONFIG_FB_SYS_FILLRECT is not set | ||
851 | # CONFIG_FB_SYS_COPYAREA is not set | ||
852 | # CONFIG_FB_SYS_IMAGEBLIT is not set | ||
853 | # CONFIG_FB_FOREIGN_ENDIAN is not set | ||
854 | # CONFIG_FB_SYS_FOPS is not set | ||
855 | # CONFIG_FB_SVGALIB is not set | ||
856 | # CONFIG_FB_MACMODES is not set | ||
857 | # CONFIG_FB_BACKLIGHT is not set | ||
858 | # CONFIG_FB_MODE_HELPERS is not set | ||
859 | # CONFIG_FB_TILEBLITTING is not set | ||
860 | |||
861 | # | ||
862 | # Frame buffer hardware drivers | ||
863 | # | ||
864 | # CONFIG_FB_S1D13XXX is not set | ||
865 | CONFIG_FB_ATMEL=y | ||
866 | # CONFIG_FB_VIRTUAL is not set | ||
867 | CONFIG_BACKLIGHT_LCD_SUPPORT=y | ||
868 | CONFIG_LCD_CLASS_DEVICE=y | ||
869 | # CONFIG_LCD_LTV350QV is not set | ||
870 | # CONFIG_LCD_ILI9320 is not set | ||
871 | # CONFIG_LCD_VGG2432A4 is not set | ||
872 | # CONFIG_LCD_PLATFORM is not set | ||
873 | CONFIG_BACKLIGHT_CLASS_DEVICE=y | ||
874 | CONFIG_BACKLIGHT_ATMEL_LCDC=y | ||
875 | # CONFIG_BACKLIGHT_ATMEL_PWM is not set | ||
876 | # CONFIG_BACKLIGHT_CORGI is not set | ||
877 | |||
878 | # | ||
879 | # Display device support | ||
880 | # | ||
881 | # CONFIG_DISPLAY_SUPPORT is not set | ||
882 | |||
883 | # | ||
884 | # Console display driver support | ||
885 | # | ||
886 | # CONFIG_VGA_CONSOLE is not set | ||
887 | CONFIG_DUMMY_CONSOLE=y | ||
888 | CONFIG_FRAMEBUFFER_CONSOLE=y | ||
889 | CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y | ||
890 | # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set | ||
891 | # CONFIG_FONTS is not set | ||
892 | CONFIG_FONT_8x8=y | ||
893 | CONFIG_FONT_8x16=y | ||
894 | CONFIG_LOGO=y | ||
895 | CONFIG_LOGO_LINUX_MONO=y | ||
896 | CONFIG_LOGO_LINUX_VGA16=y | ||
897 | CONFIG_LOGO_LINUX_CLUT224=y | ||
898 | # CONFIG_SOUND is not set | ||
899 | CONFIG_HID_SUPPORT=y | ||
900 | CONFIG_HID=y | ||
901 | CONFIG_HID_DEBUG=y | ||
902 | # CONFIG_HIDRAW is not set | ||
903 | |||
904 | # | ||
905 | # USB Input Devices | ||
906 | # | ||
907 | CONFIG_USB_HID=y | ||
908 | # CONFIG_USB_HIDINPUT_POWERBOOK is not set | ||
909 | # CONFIG_HID_FF is not set | ||
910 | # CONFIG_USB_HIDDEV is not set | ||
911 | CONFIG_USB_SUPPORT=y | ||
912 | CONFIG_USB_ARCH_HAS_HCD=y | ||
913 | CONFIG_USB_ARCH_HAS_OHCI=y | ||
914 | # CONFIG_USB_ARCH_HAS_EHCI is not set | ||
915 | CONFIG_USB=y | ||
916 | # CONFIG_USB_DEBUG is not set | ||
917 | # CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set | ||
918 | |||
919 | # | ||
920 | # Miscellaneous USB options | ||
921 | # | ||
922 | CONFIG_USB_DEVICEFS=y | ||
923 | CONFIG_USB_DEVICE_CLASS=y | ||
924 | # CONFIG_USB_DYNAMIC_MINORS is not set | ||
925 | # CONFIG_USB_OTG is not set | ||
926 | |||
927 | # | ||
928 | # USB Host Controller Drivers | ||
929 | # | ||
930 | # CONFIG_USB_C67X00_HCD is not set | ||
931 | # CONFIG_USB_ISP116X_HCD is not set | ||
932 | # CONFIG_USB_ISP1760_HCD is not set | ||
933 | CONFIG_USB_OHCI_HCD=y | ||
934 | # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set | ||
935 | # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set | ||
936 | CONFIG_USB_OHCI_LITTLE_ENDIAN=y | ||
937 | # CONFIG_USB_SL811_HCD is not set | ||
938 | # CONFIG_USB_R8A66597_HCD is not set | ||
939 | |||
940 | # | ||
941 | # USB Device Class drivers | ||
942 | # | ||
943 | # CONFIG_USB_ACM is not set | ||
944 | # CONFIG_USB_PRINTER is not set | ||
945 | # CONFIG_USB_WDM is not set | ||
946 | |||
947 | # | ||
948 | # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' | ||
949 | # | ||
950 | |||
951 | # | ||
952 | # may also be needed; see USB_STORAGE Help for more information | ||
953 | # | ||
954 | CONFIG_USB_STORAGE=y | ||
955 | # CONFIG_USB_STORAGE_DEBUG is not set | ||
956 | # CONFIG_USB_STORAGE_DATAFAB is not set | ||
957 | # CONFIG_USB_STORAGE_FREECOM is not set | ||
958 | # CONFIG_USB_STORAGE_ISD200 is not set | ||
959 | # CONFIG_USB_STORAGE_DPCM is not set | ||
960 | # CONFIG_USB_STORAGE_USBAT is not set | ||
961 | # CONFIG_USB_STORAGE_SDDR09 is not set | ||
962 | # CONFIG_USB_STORAGE_SDDR55 is not set | ||
963 | # CONFIG_USB_STORAGE_JUMPSHOT is not set | ||
964 | # CONFIG_USB_STORAGE_ALAUDA is not set | ||
965 | # CONFIG_USB_STORAGE_ONETOUCH is not set | ||
966 | # CONFIG_USB_STORAGE_KARMA is not set | ||
967 | # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set | ||
968 | # CONFIG_USB_LIBUSUAL is not set | ||
969 | |||
970 | # | ||
971 | # USB Imaging devices | ||
972 | # | ||
973 | # CONFIG_USB_MDC800 is not set | ||
974 | # CONFIG_USB_MICROTEK is not set | ||
975 | CONFIG_USB_MON=y | ||
976 | |||
977 | # | ||
978 | # USB port drivers | ||
979 | # | ||
980 | # CONFIG_USB_SERIAL is not set | ||
981 | |||
982 | # | ||
983 | # USB Miscellaneous drivers | ||
984 | # | ||
985 | # CONFIG_USB_EMI62 is not set | ||
986 | # CONFIG_USB_EMI26 is not set | ||
987 | # CONFIG_USB_ADUTUX is not set | ||
988 | # CONFIG_USB_AUERSWALD is not set | ||
989 | # CONFIG_USB_RIO500 is not set | ||
990 | # CONFIG_USB_LEGOTOWER is not set | ||
991 | # CONFIG_USB_LCD is not set | ||
992 | # CONFIG_USB_BERRY_CHARGE is not set | ||
993 | # CONFIG_USB_LED is not set | ||
994 | # CONFIG_USB_CYPRESS_CY7C63 is not set | ||
995 | # CONFIG_USB_CYTHERM is not set | ||
996 | # CONFIG_USB_PHIDGET is not set | ||
997 | # CONFIG_USB_IDMOUSE is not set | ||
998 | # CONFIG_USB_FTDI_ELAN is not set | ||
999 | # CONFIG_USB_APPLEDISPLAY is not set | ||
1000 | # CONFIG_USB_LD is not set | ||
1001 | # CONFIG_USB_TRANCEVIBRATOR is not set | ||
1002 | # CONFIG_USB_IOWARRIOR is not set | ||
1003 | # CONFIG_USB_TEST is not set | ||
1004 | # CONFIG_USB_ISIGHTFW is not set | ||
1005 | # CONFIG_USB_GADGET is not set | ||
1006 | CONFIG_MMC=y | ||
1007 | # CONFIG_MMC_DEBUG is not set | ||
1008 | # CONFIG_MMC_UNSAFE_RESUME is not set | ||
1009 | |||
1010 | # | ||
1011 | # MMC/SD Card Drivers | ||
1012 | # | ||
1013 | CONFIG_MMC_BLOCK=y | ||
1014 | CONFIG_MMC_BLOCK_BOUNCE=y | ||
1015 | CONFIG_SDIO_UART=y | ||
1016 | # CONFIG_MMC_TEST is not set | ||
1017 | |||
1018 | # | ||
1019 | # MMC/SD Host Controller Drivers | ||
1020 | # | ||
1021 | # CONFIG_MMC_SDHCI is not set | ||
1022 | CONFIG_MMC_AT91=y | ||
1023 | # CONFIG_MMC_SPI is not set | ||
1024 | # CONFIG_NEW_LEDS is not set | ||
1025 | CONFIG_RTC_LIB=y | ||
1026 | # CONFIG_RTC_CLASS is not set | ||
1027 | # CONFIG_DMADEVICES is not set | ||
1028 | # CONFIG_UIO is not set | ||
1029 | |||
1030 | # | ||
1031 | # File systems | ||
1032 | # | ||
1033 | CONFIG_EXT2_FS=y | ||
1034 | # CONFIG_EXT2_FS_XATTR is not set | ||
1035 | # CONFIG_EXT2_FS_XIP is not set | ||
1036 | # CONFIG_EXT3_FS is not set | ||
1037 | # CONFIG_EXT4DEV_FS is not set | ||
1038 | # CONFIG_REISERFS_FS is not set | ||
1039 | # CONFIG_JFS_FS is not set | ||
1040 | # CONFIG_FS_POSIX_ACL is not set | ||
1041 | # CONFIG_XFS_FS is not set | ||
1042 | # CONFIG_OCFS2_FS is not set | ||
1043 | # CONFIG_DNOTIFY is not set | ||
1044 | # CONFIG_INOTIFY is not set | ||
1045 | # CONFIG_QUOTA is not set | ||
1046 | CONFIG_AUTOFS_FS=y | ||
1047 | # CONFIG_AUTOFS4_FS is not set | ||
1048 | # CONFIG_FUSE_FS is not set | ||
1049 | |||
1050 | # | ||
1051 | # CD-ROM/DVD Filesystems | ||
1052 | # | ||
1053 | # CONFIG_ISO9660_FS is not set | ||
1054 | # CONFIG_UDF_FS is not set | ||
1055 | |||
1056 | # | ||
1057 | # DOS/FAT/NT Filesystems | ||
1058 | # | ||
1059 | CONFIG_FAT_FS=y | ||
1060 | # CONFIG_MSDOS_FS is not set | ||
1061 | CONFIG_VFAT_FS=y | ||
1062 | CONFIG_FAT_DEFAULT_CODEPAGE=437 | ||
1063 | CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" | ||
1064 | # CONFIG_NTFS_FS is not set | ||
1065 | |||
1066 | # | ||
1067 | # Pseudo filesystems | ||
1068 | # | ||
1069 | CONFIG_PROC_FS=y | ||
1070 | CONFIG_PROC_SYSCTL=y | ||
1071 | CONFIG_SYSFS=y | ||
1072 | CONFIG_TMPFS=y | ||
1073 | # CONFIG_TMPFS_POSIX_ACL is not set | ||
1074 | # CONFIG_HUGETLB_PAGE is not set | ||
1075 | # CONFIG_CONFIGFS_FS is not set | ||
1076 | |||
1077 | # | ||
1078 | # Miscellaneous filesystems | ||
1079 | # | ||
1080 | # CONFIG_ADFS_FS is not set | ||
1081 | # CONFIG_AFFS_FS is not set | ||
1082 | # CONFIG_HFS_FS is not set | ||
1083 | # CONFIG_HFSPLUS_FS is not set | ||
1084 | # CONFIG_BEFS_FS is not set | ||
1085 | # CONFIG_BFS_FS is not set | ||
1086 | # CONFIG_EFS_FS is not set | ||
1087 | CONFIG_JFFS2_FS=y | ||
1088 | CONFIG_JFFS2_FS_DEBUG=0 | ||
1089 | CONFIG_JFFS2_FS_WRITEBUFFER=y | ||
1090 | CONFIG_JFFS2_FS_WBUF_VERIFY=y | ||
1091 | # CONFIG_JFFS2_SUMMARY is not set | ||
1092 | # CONFIG_JFFS2_FS_XATTR is not set | ||
1093 | # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set | ||
1094 | CONFIG_JFFS2_ZLIB=y | ||
1095 | # CONFIG_JFFS2_LZO is not set | ||
1096 | CONFIG_JFFS2_RTIME=y | ||
1097 | # CONFIG_JFFS2_RUBIN is not set | ||
1098 | # CONFIG_CRAMFS is not set | ||
1099 | # CONFIG_VXFS_FS is not set | ||
1100 | # CONFIG_MINIX_FS is not set | ||
1101 | # CONFIG_OMFS_FS is not set | ||
1102 | # CONFIG_HPFS_FS is not set | ||
1103 | # CONFIG_QNX4FS_FS is not set | ||
1104 | # CONFIG_ROMFS_FS is not set | ||
1105 | # CONFIG_SYSV_FS is not set | ||
1106 | # CONFIG_UFS_FS is not set | ||
1107 | CONFIG_NETWORK_FILESYSTEMS=y | ||
1108 | CONFIG_NFS_FS=y | ||
1109 | # CONFIG_NFS_V3 is not set | ||
1110 | # CONFIG_NFS_V4 is not set | ||
1111 | CONFIG_ROOT_NFS=y | ||
1112 | # CONFIG_NFSD is not set | ||
1113 | CONFIG_LOCKD=y | ||
1114 | CONFIG_NFS_COMMON=y | ||
1115 | CONFIG_SUNRPC=y | ||
1116 | # CONFIG_RPCSEC_GSS_KRB5 is not set | ||
1117 | # CONFIG_RPCSEC_GSS_SPKM3 is not set | ||
1118 | # CONFIG_SMB_FS is not set | ||
1119 | # CONFIG_CIFS is not set | ||
1120 | # CONFIG_NCP_FS is not set | ||
1121 | # CONFIG_CODA_FS is not set | ||
1122 | # CONFIG_AFS_FS is not set | ||
1123 | |||
1124 | # | ||
1125 | # Partition Types | ||
1126 | # | ||
1127 | # CONFIG_PARTITION_ADVANCED is not set | ||
1128 | CONFIG_MSDOS_PARTITION=y | ||
1129 | CONFIG_NLS=y | ||
1130 | CONFIG_NLS_DEFAULT="iso8859-1" | ||
1131 | # CONFIG_NLS_CODEPAGE_437 is not set | ||
1132 | # CONFIG_NLS_CODEPAGE_737 is not set | ||
1133 | # CONFIG_NLS_CODEPAGE_775 is not set | ||
1134 | # CONFIG_NLS_CODEPAGE_850 is not set | ||
1135 | # CONFIG_NLS_CODEPAGE_852 is not set | ||
1136 | # CONFIG_NLS_CODEPAGE_855 is not set | ||
1137 | # CONFIG_NLS_CODEPAGE_857 is not set | ||
1138 | # CONFIG_NLS_CODEPAGE_860 is not set | ||
1139 | # CONFIG_NLS_CODEPAGE_861 is not set | ||
1140 | # CONFIG_NLS_CODEPAGE_862 is not set | ||
1141 | # CONFIG_NLS_CODEPAGE_863 is not set | ||
1142 | # CONFIG_NLS_CODEPAGE_864 is not set | ||
1143 | # CONFIG_NLS_CODEPAGE_865 is not set | ||
1144 | # CONFIG_NLS_CODEPAGE_866 is not set | ||
1145 | # CONFIG_NLS_CODEPAGE_869 is not set | ||
1146 | # CONFIG_NLS_CODEPAGE_936 is not set | ||
1147 | # CONFIG_NLS_CODEPAGE_950 is not set | ||
1148 | # CONFIG_NLS_CODEPAGE_932 is not set | ||
1149 | # CONFIG_NLS_CODEPAGE_949 is not set | ||
1150 | # CONFIG_NLS_CODEPAGE_874 is not set | ||
1151 | # CONFIG_NLS_ISO8859_8 is not set | ||
1152 | # CONFIG_NLS_CODEPAGE_1250 is not set | ||
1153 | # CONFIG_NLS_CODEPAGE_1251 is not set | ||
1154 | # CONFIG_NLS_ASCII is not set | ||
1155 | # CONFIG_NLS_ISO8859_1 is not set | ||
1156 | # CONFIG_NLS_ISO8859_2 is not set | ||
1157 | # CONFIG_NLS_ISO8859_3 is not set | ||
1158 | # CONFIG_NLS_ISO8859_4 is not set | ||
1159 | # CONFIG_NLS_ISO8859_5 is not set | ||
1160 | # CONFIG_NLS_ISO8859_6 is not set | ||
1161 | # CONFIG_NLS_ISO8859_7 is not set | ||
1162 | # CONFIG_NLS_ISO8859_9 is not set | ||
1163 | # CONFIG_NLS_ISO8859_13 is not set | ||
1164 | # CONFIG_NLS_ISO8859_14 is not set | ||
1165 | # CONFIG_NLS_ISO8859_15 is not set | ||
1166 | # CONFIG_NLS_KOI8_R is not set | ||
1167 | # CONFIG_NLS_KOI8_U is not set | ||
1168 | # CONFIG_NLS_UTF8 is not set | ||
1169 | # CONFIG_DLM is not set | ||
1170 | |||
1171 | # | ||
1172 | # Kernel hacking | ||
1173 | # | ||
1174 | # CONFIG_PRINTK_TIME is not set | ||
1175 | # CONFIG_ENABLE_WARN_DEPRECATED is not set | ||
1176 | # CONFIG_ENABLE_MUST_CHECK is not set | ||
1177 | CONFIG_FRAME_WARN=1024 | ||
1178 | # CONFIG_MAGIC_SYSRQ is not set | ||
1179 | # CONFIG_UNUSED_SYMBOLS is not set | ||
1180 | # CONFIG_DEBUG_FS is not set | ||
1181 | # CONFIG_HEADERS_CHECK is not set | ||
1182 | # CONFIG_DEBUG_KERNEL is not set | ||
1183 | # CONFIG_SLUB_DEBUG_ON is not set | ||
1184 | # CONFIG_SLUB_STATS is not set | ||
1185 | CONFIG_DEBUG_BUGVERBOSE=y | ||
1186 | CONFIG_DEBUG_MEMORY_INIT=y | ||
1187 | CONFIG_FRAME_POINTER=y | ||
1188 | # CONFIG_LATENCYTOP is not set | ||
1189 | CONFIG_HAVE_FTRACE=y | ||
1190 | CONFIG_HAVE_DYNAMIC_FTRACE=y | ||
1191 | # CONFIG_FTRACE is not set | ||
1192 | # CONFIG_IRQSOFF_TRACER is not set | ||
1193 | # CONFIG_SCHED_TRACER is not set | ||
1194 | # CONFIG_CONTEXT_SWITCH_TRACER is not set | ||
1195 | # CONFIG_SAMPLES is not set | ||
1196 | CONFIG_HAVE_ARCH_KGDB=y | ||
1197 | # CONFIG_DEBUG_USER is not set | ||
1198 | |||
1199 | # | ||
1200 | # Security options | ||
1201 | # | ||
1202 | # CONFIG_KEYS is not set | ||
1203 | # CONFIG_SECURITY is not set | ||
1204 | # CONFIG_SECURITY_FILE_CAPABILITIES is not set | ||
1205 | CONFIG_CRYPTO=y | ||
1206 | |||
1207 | # | ||
1208 | # Crypto core or helper | ||
1209 | # | ||
1210 | # CONFIG_CRYPTO_MANAGER is not set | ||
1211 | # CONFIG_CRYPTO_GF128MUL is not set | ||
1212 | # CONFIG_CRYPTO_NULL is not set | ||
1213 | # CONFIG_CRYPTO_CRYPTD is not set | ||
1214 | # CONFIG_CRYPTO_AUTHENC is not set | ||
1215 | # CONFIG_CRYPTO_TEST is not set | ||
1216 | |||
1217 | # | ||
1218 | # Authenticated Encryption with Associated Data | ||
1219 | # | ||
1220 | # CONFIG_CRYPTO_CCM is not set | ||
1221 | # CONFIG_CRYPTO_GCM is not set | ||
1222 | # CONFIG_CRYPTO_SEQIV is not set | ||
1223 | |||
1224 | # | ||
1225 | # Block modes | ||
1226 | # | ||
1227 | # CONFIG_CRYPTO_CBC is not set | ||
1228 | # CONFIG_CRYPTO_CTR is not set | ||
1229 | # CONFIG_CRYPTO_CTS is not set | ||
1230 | # CONFIG_CRYPTO_ECB is not set | ||
1231 | # CONFIG_CRYPTO_LRW is not set | ||
1232 | # CONFIG_CRYPTO_PCBC is not set | ||
1233 | # CONFIG_CRYPTO_XTS is not set | ||
1234 | |||
1235 | # | ||
1236 | # Hash modes | ||
1237 | # | ||
1238 | # CONFIG_CRYPTO_HMAC is not set | ||
1239 | # CONFIG_CRYPTO_XCBC is not set | ||
1240 | |||
1241 | # | ||
1242 | # Digest | ||
1243 | # | ||
1244 | # CONFIG_CRYPTO_CRC32C is not set | ||
1245 | # CONFIG_CRYPTO_MD4 is not set | ||
1246 | # CONFIG_CRYPTO_MD5 is not set | ||
1247 | # CONFIG_CRYPTO_MICHAEL_MIC is not set | ||
1248 | # CONFIG_CRYPTO_RMD128 is not set | ||
1249 | # CONFIG_CRYPTO_RMD160 is not set | ||
1250 | # CONFIG_CRYPTO_RMD256 is not set | ||
1251 | # CONFIG_CRYPTO_RMD320 is not set | ||
1252 | # CONFIG_CRYPTO_SHA1 is not set | ||
1253 | # CONFIG_CRYPTO_SHA256 is not set | ||
1254 | # CONFIG_CRYPTO_SHA512 is not set | ||
1255 | # CONFIG_CRYPTO_TGR192 is not set | ||
1256 | # CONFIG_CRYPTO_WP512 is not set | ||
1257 | |||
1258 | # | ||
1259 | # Ciphers | ||
1260 | # | ||
1261 | # CONFIG_CRYPTO_AES is not set | ||
1262 | # CONFIG_CRYPTO_ANUBIS is not set | ||
1263 | # CONFIG_CRYPTO_ARC4 is not set | ||
1264 | # CONFIG_CRYPTO_BLOWFISH is not set | ||
1265 | # CONFIG_CRYPTO_CAMELLIA is not set | ||
1266 | # CONFIG_CRYPTO_CAST5 is not set | ||
1267 | # CONFIG_CRYPTO_CAST6 is not set | ||
1268 | # CONFIG_CRYPTO_DES is not set | ||
1269 | # CONFIG_CRYPTO_FCRYPT is not set | ||
1270 | # CONFIG_CRYPTO_KHAZAD is not set | ||
1271 | # CONFIG_CRYPTO_SALSA20 is not set | ||
1272 | # CONFIG_CRYPTO_SEED is not set | ||
1273 | # CONFIG_CRYPTO_SERPENT is not set | ||
1274 | # CONFIG_CRYPTO_TEA is not set | ||
1275 | # CONFIG_CRYPTO_TWOFISH is not set | ||
1276 | |||
1277 | # | ||
1278 | # Compression | ||
1279 | # | ||
1280 | # CONFIG_CRYPTO_DEFLATE is not set | ||
1281 | # CONFIG_CRYPTO_LZO is not set | ||
1282 | # CONFIG_CRYPTO_HW is not set | ||
1283 | |||
1284 | # | ||
1285 | # Library routines | ||
1286 | # | ||
1287 | CONFIG_BITREVERSE=y | ||
1288 | # CONFIG_GENERIC_FIND_FIRST_BIT is not set | ||
1289 | # CONFIG_GENERIC_FIND_NEXT_BIT is not set | ||
1290 | # CONFIG_CRC_CCITT is not set | ||
1291 | # CONFIG_CRC16 is not set | ||
1292 | # CONFIG_CRC_T10DIF is not set | ||
1293 | # CONFIG_CRC_ITU_T is not set | ||
1294 | CONFIG_CRC32=y | ||
1295 | # CONFIG_CRC7 is not set | ||
1296 | # CONFIG_LIBCRC32C is not set | ||
1297 | CONFIG_ZLIB_INFLATE=y | ||
1298 | CONFIG_ZLIB_DEFLATE=y | ||
1299 | CONFIG_PLIST=y | ||
1300 | CONFIG_HAS_IOMEM=y | ||
1301 | CONFIG_HAS_IOPORT=y | ||
1302 | CONFIG_HAS_DMA=y | ||
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 95dc71aaa668..323b47f2b52f 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig | |||
@@ -242,6 +242,12 @@ config MACH_USB_A9263 | |||
242 | Select this if you are using a Calao Systems USB-A9263. | 242 | Select this if you are using a Calao Systems USB-A9263. |
243 | <http://www.calao-systems.com> | 243 | <http://www.calao-systems.com> |
244 | 244 | ||
245 | config MACH_NEOCORE926 | ||
246 | bool "Adeneo NEOCORE926" | ||
247 | depends on ARCH_AT91SAM9263 | ||
248 | help | ||
249 | Select this if you are using the Adeneo Neocore 926 board. | ||
250 | |||
245 | endif | 251 | endif |
246 | 252 | ||
247 | # ---------------------------------------------------------- | 253 | # ---------------------------------------------------------- |
@@ -309,7 +315,7 @@ comment "AT91 Board Options" | |||
309 | 315 | ||
310 | config MTD_AT91_DATAFLASH_CARD | 316 | config MTD_AT91_DATAFLASH_CARD |
311 | bool "Enable DataFlash Card support" | 317 | bool "Enable DataFlash Card support" |
312 | depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK) | 318 | depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926) |
313 | help | 319 | help |
314 | Enable support for the DataFlash card. | 320 | Enable support for the DataFlash card. |
315 | 321 | ||
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index f430a64e8610..c69ff237fd14 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile | |||
@@ -47,6 +47,7 @@ obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o | |||
47 | # AT91SAM9263 board-specific support | 47 | # AT91SAM9263 board-specific support |
48 | obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o | 48 | obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o |
49 | obj-$(CONFIG_MACH_USB_A9263) += board-usb-a9263.o | 49 | obj-$(CONFIG_MACH_USB_A9263) += board-usb-a9263.o |
50 | obj-$(CONFIG_MACH_NEOCORE926) += board-neocore926.o | ||
50 | 51 | ||
51 | # AT91SAM9RL board-specific support | 52 | # AT91SAM9RL board-specific support |
52 | obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o | 53 | obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o |
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c new file mode 100644 index 000000000000..9ba7ba2cc3b1 --- /dev/null +++ b/arch/arm/mach-at91/board-neocore926.c | |||
@@ -0,0 +1,397 @@ | |||
1 | /* | ||
2 | * linux/arch/arm/mach-at91/board-neocore926.c | ||
3 | * | ||
4 | * Copyright (C) 2005 SAN People | ||
5 | * Copyright (C) 2007 Atmel Corporation | ||
6 | * Copyright (C) 2008 ADENEO. | ||
7 | * | ||
8 | * This program is free software; you can redistribute it and/or modify | ||
9 | * it under the terms of the GNU General Public License as published by | ||
10 | * the Free Software Foundation; either version 2 of the License, or | ||
11 | * (at your option) any later version. | ||
12 | * | ||
13 | * This program is distributed in the hope that it will be useful, | ||
14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
16 | * GNU General Public License for more details. | ||
17 | * | ||
18 | * You should have received a copy of the GNU General Public License | ||
19 | * along with this program; if not, write to the Free Software | ||
20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | ||
21 | */ | ||
22 | |||
23 | #include <linux/types.h> | ||
24 | #include <linux/init.h> | ||
25 | #include <linux/mm.h> | ||
26 | #include <linux/module.h> | ||
27 | #include <linux/platform_device.h> | ||
28 | #include <linux/spi/spi.h> | ||
29 | #include <linux/spi/ads7846.h> | ||
30 | #include <linux/fb.h> | ||
31 | #include <linux/gpio_keys.h> | ||
32 | #include <linux/input.h> | ||
33 | |||
34 | #include <video/atmel_lcdc.h> | ||
35 | |||
36 | #include <asm/setup.h> | ||
37 | #include <asm/mach-types.h> | ||
38 | #include <asm/irq.h> | ||
39 | #include <asm/sizes.h> | ||
40 | |||
41 | #include <asm/mach/arch.h> | ||
42 | #include <asm/mach/map.h> | ||
43 | #include <asm/mach/irq.h> | ||
44 | |||
45 | #include <mach/hardware.h> | ||
46 | #include <mach/board.h> | ||
47 | #include <mach/gpio.h> | ||
48 | #include <mach/at91sam9_smc.h> | ||
49 | |||
50 | #include "sam9_smc.h" | ||
51 | #include "generic.h" | ||
52 | |||
53 | |||
54 | static void __init neocore926_map_io(void) | ||
55 | { | ||
56 | /* Initialize processor: 20 MHz crystal */ | ||
57 | at91sam9263_initialize(20000000); | ||
58 | |||
59 | /* DGBU on ttyS0. (Rx & Tx only) */ | ||
60 | at91_register_uart(0, 0, 0); | ||
61 | |||
62 | /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */ | ||
63 | at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); | ||
64 | |||
65 | /* set serial console to ttyS0 (ie, DBGU) */ | ||
66 | at91_set_serial_console(0); | ||
67 | } | ||
68 | |||
69 | static void __init neocore926_init_irq(void) | ||
70 | { | ||
71 | at91sam9263_init_interrupts(NULL); | ||
72 | } | ||
73 | |||
74 | |||
75 | /* | ||
76 | * USB Host port | ||
77 | */ | ||
78 | static struct at91_usbh_data __initdata neocore926_usbh_data = { | ||
79 | .ports = 2, | ||
80 | .vbus_pin = { AT91_PIN_PA24, AT91_PIN_PA21 }, | ||
81 | }; | ||
82 | |||
83 | /* | ||
84 | * USB Device port | ||
85 | */ | ||
86 | static struct at91_udc_data __initdata neocore926_udc_data = { | ||
87 | .vbus_pin = AT91_PIN_PA25, | ||
88 | .pullup_pin = 0, /* pull-up driven by UDC */ | ||
89 | }; | ||
90 | |||
91 | |||
92 | /* | ||
93 | * ADS7846 Touchscreen | ||
94 | */ | ||
95 | #if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) | ||
96 | static int ads7843_pendown_state(void) | ||
97 | { | ||
98 | return !at91_get_gpio_value(AT91_PIN_PA15); /* Touchscreen PENIRQ */ | ||
99 | } | ||
100 | |||
101 | static struct ads7846_platform_data ads_info = { | ||
102 | .model = 7843, | ||
103 | .x_min = 150, | ||
104 | .x_max = 3830, | ||
105 | .y_min = 190, | ||
106 | .y_max = 3830, | ||
107 | .vref_delay_usecs = 100, | ||
108 | .x_plate_ohms = 450, | ||
109 | .y_plate_ohms = 250, | ||
110 | .pressure_max = 15000, | ||
111 | .debounce_max = 1, | ||
112 | .debounce_rep = 0, | ||
113 | .debounce_tol = (~0), | ||
114 | .get_pendown_state = ads7843_pendown_state, | ||
115 | }; | ||
116 | |||
117 | static void __init neocore926_add_device_ts(void) | ||
118 | { | ||
119 | at91_set_B_periph(AT91_PIN_PA15, 1); /* External IRQ1, with pullup */ | ||
120 | at91_set_gpio_input(AT91_PIN_PC13, 1); /* Touchscreen BUSY signal */ | ||
121 | } | ||
122 | #else | ||
123 | static void __init neocore926_add_device_ts(void) {} | ||
124 | #endif | ||
125 | |||
126 | /* | ||
127 | * SPI devices. | ||
128 | */ | ||
129 | static struct spi_board_info neocore926_spi_devices[] = { | ||
130 | #if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) | ||
131 | { /* DataFlash card */ | ||
132 | .modalias = "mtd_dataflash", | ||
133 | .chip_select = 0, | ||
134 | .max_speed_hz = 15 * 1000 * 1000, | ||
135 | .bus_num = 0, | ||
136 | }, | ||
137 | #endif | ||
138 | #if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) | ||
139 | { | ||
140 | .modalias = "ads7846", | ||
141 | .chip_select = 1, | ||
142 | .max_speed_hz = 125000 * 16, | ||
143 | .bus_num = 0, | ||
144 | .platform_data = &ads_info, | ||
145 | .irq = AT91SAM9263_ID_IRQ1, | ||
146 | }, | ||
147 | #endif | ||
148 | }; | ||
149 | |||
150 | |||
151 | /* | ||
152 | * MCI (SD/MMC) | ||
153 | */ | ||
154 | static struct at91_mmc_data __initdata neocore926_mmc_data = { | ||
155 | .wire4 = 1, | ||
156 | .det_pin = AT91_PIN_PE18, | ||
157 | .wp_pin = AT91_PIN_PE19, | ||
158 | }; | ||
159 | |||
160 | |||
161 | /* | ||
162 | * MACB Ethernet device | ||
163 | */ | ||
164 | static struct at91_eth_data __initdata neocore926_macb_data = { | ||
165 | .phy_irq_pin = AT91_PIN_PE31, | ||
166 | .is_rmii = 1, | ||
167 | }; | ||
168 | |||
169 | |||
170 | /* | ||
171 | * NAND flash | ||
172 | */ | ||
173 | static struct mtd_partition __initdata neocore926_nand_partition[] = { | ||
174 | { | ||
175 | .name = "Linux Kernel", /* "Partition 1", */ | ||
176 | .offset = 0, | ||
177 | .size = SZ_8M, | ||
178 | }, | ||
179 | { | ||
180 | .name = "Filesystem", /* "Partition 2", */ | ||
181 | .offset = MTDPART_OFS_NXTBLK, | ||
182 | .size = SZ_32M, | ||
183 | }, | ||
184 | { | ||
185 | .name = "Free", /* "Partition 3", */ | ||
186 | .offset = MTDPART_OFS_NXTBLK, | ||
187 | .size = MTDPART_SIZ_FULL, | ||
188 | }, | ||
189 | }; | ||
190 | |||
191 | static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) | ||
192 | { | ||
193 | *num_partitions = ARRAY_SIZE(neocore926_nand_partition); | ||
194 | return neocore926_nand_partition; | ||
195 | } | ||
196 | |||
197 | static struct atmel_nand_data __initdata neocore926_nand_data = { | ||
198 | .ale = 21, | ||
199 | .cle = 22, | ||
200 | .rdy_pin = AT91_PIN_PB19, | ||
201 | .rdy_pin_active_low = 1, | ||
202 | .enable_pin = AT91_PIN_PD15, | ||
203 | .partition_info = nand_partitions, | ||
204 | }; | ||
205 | |||
206 | static struct sam9_smc_config __initdata neocore926_nand_smc_config = { | ||
207 | .ncs_read_setup = 0, | ||
208 | .nrd_setup = 1, | ||
209 | .ncs_write_setup = 0, | ||
210 | .nwe_setup = 1, | ||
211 | |||
212 | .ncs_read_pulse = 4, | ||
213 | .nrd_pulse = 4, | ||
214 | .ncs_write_pulse = 4, | ||
215 | .nwe_pulse = 4, | ||
216 | |||
217 | .read_cycle = 6, | ||
218 | .write_cycle = 6, | ||
219 | |||
220 | .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, | ||
221 | .tdf_cycles = 2, | ||
222 | }; | ||
223 | |||
224 | static void __init neocore926_add_device_nand(void) | ||
225 | { | ||
226 | /* configure chip-select 3 (NAND) */ | ||
227 | sam9_smc_configure(3, &neocore926_nand_smc_config); | ||
228 | |||
229 | at91_add_device_nand(&neocore926_nand_data); | ||
230 | } | ||
231 | |||
232 | |||
233 | /* | ||
234 | * LCD Controller | ||
235 | */ | ||
236 | #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) | ||
237 | static struct fb_videomode at91_tft_vga_modes[] = { | ||
238 | { | ||
239 | .name = "TX09D50VM1CCA @ 60", | ||
240 | .refresh = 60, | ||
241 | .xres = 240, .yres = 320, | ||
242 | .pixclock = KHZ2PICOS(5000), | ||
243 | |||
244 | .left_margin = 1, .right_margin = 33, | ||
245 | .upper_margin = 1, .lower_margin = 0, | ||
246 | .hsync_len = 5, .vsync_len = 1, | ||
247 | |||
248 | .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | ||
249 | .vmode = FB_VMODE_NONINTERLACED, | ||
250 | }, | ||
251 | }; | ||
252 | |||
253 | static struct fb_monspecs at91fb_default_monspecs = { | ||
254 | .manufacturer = "HIT", | ||
255 | .monitor = "TX09D70VM1CCA", | ||
256 | |||
257 | .modedb = at91_tft_vga_modes, | ||
258 | .modedb_len = ARRAY_SIZE(at91_tft_vga_modes), | ||
259 | .hfmin = 15000, | ||
260 | .hfmax = 64000, | ||
261 | .vfmin = 50, | ||
262 | .vfmax = 150, | ||
263 | }; | ||
264 | |||
265 | #define AT91SAM9263_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ | ||
266 | | ATMEL_LCDC_DISTYPE_TFT \ | ||
267 | | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE) | ||
268 | |||
269 | static void at91_lcdc_power_control(int on) | ||
270 | { | ||
271 | at91_set_gpio_value(AT91_PIN_PA30, on); | ||
272 | } | ||
273 | |||
274 | /* Driver datas */ | ||
275 | static struct atmel_lcdfb_info __initdata neocore926_lcdc_data = { | ||
276 | .lcdcon_is_backlight = true, | ||
277 | .default_bpp = 16, | ||
278 | .default_dmacon = ATMEL_LCDC_DMAEN, | ||
279 | .default_lcdcon2 = AT91SAM9263_DEFAULT_LCDCON2, | ||
280 | .default_monspecs = &at91fb_default_monspecs, | ||
281 | .atmel_lcdfb_power_control = at91_lcdc_power_control, | ||
282 | .guard_time = 1, | ||
283 | .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB555, | ||
284 | }; | ||
285 | |||
286 | #else | ||
287 | static struct atmel_lcdfb_info __initdata neocore926_lcdc_data; | ||
288 | #endif | ||
289 | |||
290 | |||
291 | /* | ||
292 | * GPIO Buttons | ||
293 | */ | ||
294 | #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) | ||
295 | static struct gpio_keys_button neocore926_buttons[] = { | ||
296 | { /* BP1, "leftclic" */ | ||
297 | .code = BTN_LEFT, | ||
298 | .gpio = AT91_PIN_PC5, | ||
299 | .active_low = 1, | ||
300 | .desc = "left_click", | ||
301 | .wakeup = 1, | ||
302 | }, | ||
303 | { /* BP2, "rightclic" */ | ||
304 | .code = BTN_RIGHT, | ||
305 | .gpio = AT91_PIN_PC4, | ||
306 | .active_low = 1, | ||
307 | .desc = "right_click", | ||
308 | .wakeup = 1, | ||
309 | }, | ||
310 | }; | ||
311 | |||
312 | static struct gpio_keys_platform_data neocore926_button_data = { | ||
313 | .buttons = neocore926_buttons, | ||
314 | .nbuttons = ARRAY_SIZE(neocore926_buttons), | ||
315 | }; | ||
316 | |||
317 | static struct platform_device neocore926_button_device = { | ||
318 | .name = "gpio-keys", | ||
319 | .id = -1, | ||
320 | .num_resources = 0, | ||
321 | .dev = { | ||
322 | .platform_data = &neocore926_button_data, | ||
323 | } | ||
324 | }; | ||
325 | |||
326 | static void __init neocore926_add_device_buttons(void) | ||
327 | { | ||
328 | at91_set_GPIO_periph(AT91_PIN_PC5, 0); /* left button */ | ||
329 | at91_set_deglitch(AT91_PIN_PC5, 1); | ||
330 | at91_set_GPIO_periph(AT91_PIN_PC4, 0); /* right button */ | ||
331 | at91_set_deglitch(AT91_PIN_PC4, 1); | ||
332 | |||
333 | platform_device_register(&neocore926_button_device); | ||
334 | } | ||
335 | #else | ||
336 | static void __init neocore926_add_device_buttons(void) {} | ||
337 | #endif | ||
338 | |||
339 | |||
340 | /* | ||
341 | * AC97 | ||
342 | */ | ||
343 | static struct atmel_ac97_data neocore926_ac97_data = { | ||
344 | .reset_pin = AT91_PIN_PA13, | ||
345 | }; | ||
346 | |||
347 | |||
348 | static void __init neocore926_board_init(void) | ||
349 | { | ||
350 | /* Serial */ | ||
351 | at91_add_device_serial(); | ||
352 | |||
353 | /* USB Host */ | ||
354 | at91_add_device_usbh(&neocore926_usbh_data); | ||
355 | |||
356 | /* USB Device */ | ||
357 | at91_add_device_udc(&neocore926_udc_data); | ||
358 | |||
359 | /* SPI */ | ||
360 | at91_set_gpio_output(AT91_PIN_PE20, 1); /* select spi0 clock */ | ||
361 | at91_add_device_spi(neocore926_spi_devices, ARRAY_SIZE(neocore926_spi_devices)); | ||
362 | |||
363 | /* Touchscreen */ | ||
364 | neocore926_add_device_ts(); | ||
365 | |||
366 | /* MMC */ | ||
367 | at91_add_device_mmc(1, &neocore926_mmc_data); | ||
368 | |||
369 | /* Ethernet */ | ||
370 | at91_add_device_eth(&neocore926_macb_data); | ||
371 | |||
372 | /* NAND */ | ||
373 | neocore926_add_device_nand(); | ||
374 | |||
375 | /* I2C */ | ||
376 | at91_add_device_i2c(NULL, 0); | ||
377 | |||
378 | /* LCD Controller */ | ||
379 | at91_add_device_lcdc(&neocore926_lcdc_data); | ||
380 | |||
381 | /* Push Buttons */ | ||
382 | neocore926_add_device_buttons(); | ||
383 | |||
384 | /* AC97 */ | ||
385 | at91_add_device_ac97(&neocore926_ac97_data); | ||
386 | } | ||
387 | |||
388 | MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926") | ||
389 | /* Maintainer: ADENEO */ | ||
390 | .phys_io = AT91_BASE_SYS, | ||
391 | .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, | ||
392 | .boot_params = AT91_SDRAM_BASE + 0x100, | ||
393 | .timer = &at91sam926x_timer, | ||
394 | .map_io = neocore926_map_io, | ||
395 | .init_irq = neocore926_init_irq, | ||
396 | .init_machine = neocore926_board_init, | ||
397 | MACHINE_END | ||