170 files changed, 10308 insertions, 1151 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d953ed95701e..f1a3b10cfa9e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -518,6 +518,13 @@ config ARCH_S3C2410
           BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
           the Samsung SMDK2410 development board (and derivatives).
 
+config ARCH_S3C64XX
+        bool "Samsung S3C64XX"
+        select GENERIC_GPIO
+        select HAVE_CLK
+        help
+          Samsung S3C64XX series based systems
+
 config ARCH_SHARK
         bool "Shark"
         select CPU_SA110
@@ -621,6 +628,7 @@ source "arch/arm/mach-orion5x/Kconfig"
 source "arch/arm/mach-kirkwood/Kconfig"
 
 source "arch/arm/plat-s3c24xx/Kconfig"
+source "arch/arm/plat-s3c64xx/Kconfig"
 source "arch/arm/plat-s3c/Kconfig"
 
 if ARCH_S3C2410
@@ -632,6 +640,11 @@ source "arch/arm/mach-s3c2442/Kconfig"
 source "arch/arm/mach-s3c2443/Kconfig"
 endif
 
+if ARCH_S3C64XX
+source "arch/arm/mach-s3c6400/Kconfig"
+source "arch/arm/mach-s3c6410/Kconfig"
+endif
+
 source "arch/arm/mach-lh7a40x/Kconfig"
 
 source "arch/arm/mach-imx/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c8548a187413..24e0f0187697 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -121,7 +121,10 @@ endif
  machine-$(CONFIG_ARCH_OMAP3)      := omap2
     plat-$(CONFIG_ARCH_OMAP)       := omap
  machine-$(CONFIG_ARCH_S3C2410)    := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
+ machine-$(CONFIG_ARCH_S3C24A0)    := s3c24a0
     plat-$(CONFIG_PLAT_S3C24XX)    := s3c24xx s3c
+ machine-$(CONFIG_ARCH_S3C64XX)    := s3c6400 s3c6410
+    plat-$(CONFIG_PLAT_S3C64XX)    := s3c64xx s3c
  machine-$(CONFIG_ARCH_LH7A40X)    := lh7a40x
  machine-$(CONFIG_ARCH_VERSATILE)  := versatile
  machine-$(CONFIG_ARCH_IMX)        := imx
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index f1e4b8f60cab..ecf0bfbab107 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -69,12 +69,12 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
         /*
          * Make sure we clear all existing interrupts
          */
-        writel(0, base + VIC_VECT_ADDR);
+        writel(0, base + VIC_PL190_VECT_ADDR);
         for (i = 0; i < 19; i++) {
                 unsigned int value;
 
-                value = readl(base + VIC_VECT_ADDR);
-                writel(value, base + VIC_VECT_ADDR);
+                value = readl(base + VIC_PL190_VECT_ADDR);
+                writel(value, base + VIC_PL190_VECT_ADDR);
         }
 
         for (i = 0; i < 16; i++) {
@@ -82,7 +82,7 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
                 writel(VIC_VECT_CNTL_ENABLE | i, reg);
         }
 
-        writel(32, base + VIC_DEF_VECT_ADDR);
+        writel(32, base + VIC_PL190_DEF_VECT_ADDR);
 
         for (i = 0; i < 32; i++) {
                 unsigned int irq = irq_start + i;
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
new file mode 100644
index 000000000000..cf3c1b5d7048
--- /dev/null
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -0,0 +1,845 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.28-rc3
+# Mon Nov  3 10:10:30 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_MMU=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LSF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+CONFIG_ARCH_S3C64XX=y
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+CONFIG_PLAT_S3C64XX=y
+CONFIG_CPU_S3C6400_INIT=y
+CONFIG_CPU_S3C6400_CLOCK=y
+CONFIG_S3C64XX_SETUP_I2C0=y
+CONFIG_S3C64XX_SETUP_I2C1=y
+CONFIG_PLAT_S3C=y
+
+#
+# Boot options
+#
+CONFIG_S3C_BOOT_ERROR_RESET=y
+
+#
+# Power management
+#
+CONFIG_S3C_LOWLEVEL_UART_PORT=0
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_S3C_GPIO_CFG_S3C24XX=y
+CONFIG_S3C_GPIO_CFG_S3C64XX=y
+CONFIG_S3C_DEV_HSMMC=y
+CONFIG_S3C_DEV_HSMMC1=y
+CONFIG_S3C_DEV_I2C1=y
+CONFIG_CPU_S3C6410=y
+CONFIG_S3C6410_SETUP_SDHCI=y
+CONFIG_MACH_SMDK6410=y
+CONFIG_SMDK6410_SD_CH0=y
+# CONFIG_SMDK6410_SD_CH1 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_VIC=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/bin/bash initrd=0x51000000,4M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS=4
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_S3C6400=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_S3C2410=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+CONFIG_AT24=y
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_COMPAT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+CONFIG_MMC_DEBUG=y
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_S3C=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+CONFIG_DEBUG_S3C_PORT=y
+CONFIG_DEBUG_S3C_UART=0
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/include/asm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h
index 263f2c362a30..f87328d4a180 100644
--- a/arch/arm/include/asm/hardware/vic.h
+++ b/arch/arm/include/asm/hardware/vic.h
@@ -29,15 +29,17 @@
 #define VIC_INT_SOFT                    0x18
 #define VIC_INT_SOFT_CLEAR              0x1c
 #define VIC_PROTECT                     0x20
-#define VIC_VECT_ADDR                   0x30
-#define VIC_DEF_VECT_ADDR               0x34
+#define VIC_PL190_VECT_ADDR             0x30    /* PL190 only */
+#define VIC_PL190_DEF_VECT_ADDR         0x34    /* PL190 only */
 
-#define VIC_VECT_ADDR0                  0x100   /* 0 to 15 */
-#define VIC_VECT_CNTL0                  0x200   /* 0 to 15 */
+#define VIC_VECT_ADDR0                  0x100   /* 0 to 15 (0..31 PL192) */
+#define VIC_VECT_CNTL0                  0x200   /* 0 to 15 (0..31 PL192) */
 #define VIC_ITCR                        0x300   /* VIC test control register */
 
 #define VIC_VECT_CNTL_ENABLE            (1 << 5)
 
+#define VIC_PL192_VECT_ADDR             0xF00
+
 #ifndef __ASSEMBLY__
 void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources);
 #endif
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 7315569fbfd7..63a30d1dd425 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -33,11 +33,6 @@ config S3C2410_GPIO
         help
           GPIO code for S3C2410 and similar processors
 
-config S3C2410_CLOCK
-        bool
-        help
-          Clock code for the S3C2410, and similar processors
-
 config SIMTEC_NOR
         bool
         help
@@ -85,6 +80,7 @@ config ARCH_BAST
         select PM_SIMTEC if PM
         select SIMTEC_NOR
         select MACH_BAST_IDE
+        select S3C24XX_DCLK
         select ISA
         help
           Say Y here if you are using the Simtec Electronics EB2410ITX
@@ -122,6 +118,7 @@ config MACH_TCT_HAMMER
 config MACH_VR1000
         bool "Thorcom VR1000"
         select PM_SIMTEC if PM
+        select S3C24XX_DCLK
         select SIMTEC_NOR
         select MACH_BAST_IDE
         select CPU_S3C2410
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 00f31f8c4e78..fca02f82711c 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -15,7 +15,6 @@ obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_CPU_S3C2410_DMA)   += dma.o
 obj-$(CONFIG_S3C2410_PM)        += pm.o sleep.o
 obj-$(CONFIG_S3C2410_GPIO)      += gpio.o
-obj-$(CONFIG_S3C2410_CLOCK)     += clock.o
 
 # Machine support
 
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-core.h b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
new file mode 100644
index 000000000000..6c9fbb99ef14
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
@@ -0,0 +1,34 @@
+/* arch/arm/mach-s3c24100/include/mach/gpio-core.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C2410 - GPIO core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_CORE_H
+#define __ASM_ARCH_GPIO_CORE_H __FILE__
+
+#include <plat/gpio-core.h>
+#include <mach/regs-gpio.h>
+
+extern struct s3c_gpio_chip s3c24xx_gpios[];
+
+static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
+{
+        struct s3c_gpio_chip *chip;
+
+        if (pin > S3C2410_GPG10)
+                return NULL;
+
+        chip = &s3c24xx_gpios[pin/32];
+        return (S3C2410_GPIO_OFFSET(pin) > chip->chip.ngpio) ? chip : NULL;
+}
+
+#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h
index 3b52b86498a6..e0349af8a483 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
@@ -15,4 +15,10 @@
 #define gpio_set_value  __gpio_set_value
 #define gpio_cansleep   __gpio_cansleep
 
+/* some boards require extra gpio capacity to support external
+ * devices that need GPIO.
+ */
+
+#define ARCH_NR_GPIOS   (256 + CONFIG_S3C24XX_GPIO_EXTRA)
+
 #include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
index 950c71bf1489..9565903d490b 100644
--- a/arch/arm/mach-s3c2410/include/mach/irqs.h
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -134,6 +134,8 @@
 #define IRQ_S3C2443_HSMMC       S3C2410_IRQ(20)         /* IRQ_SDI */
 #define IRQ_S3C2443_NAND        S3C2410_IRQ(24)         /* reserved */
 
+#define IRQ_HSMMC0              IRQ_S3C2443_HSMMC
+
 #define IRQ_S3C2443_LCD1        S3C2410_IRQSUB(14)
 #define IRQ_S3C2443_LCD2        S3C2410_IRQSUB(15)
 #define IRQ_S3C2443_LCD3        S3C2410_IRQSUB(16)
@@ -160,6 +162,12 @@
 #define NR_IRQS (IRQ_S3C2440_AC97+1)
 #endif
 
+/* compatibility define. */
+#define IRQ_UART3               IRQ_S3C2443_UART3
+#define IRQ_S3CUART_RX3         IRQ_S3C2443_RX3
+#define IRQ_S3CUART_TX3         IRQ_S3C2443_TX3
+#define IRQ_S3CUART_ERR3        IRQ_S3C2443_ERR3
+
 /* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
 #define FIQ_START               IRQ_EINT0
 
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index 23c470c2e5b1..255fdfeaf957 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -13,34 +13,20 @@
 #ifndef __ASM_ARCH_MAP_H
 #define __ASM_ARCH_MAP_H
 
+#include <plat/map-base.h>
 #include <plat/map.h>
 
 #define S3C2410_ADDR(x)         S3C_ADDR(x)
 
-/* interrupt controller is the first thing we put in, to make
- * the assembly code for the irq detection easier
- */
-#define S3C24XX_VA_IRQ     S3C_VA_IRQ
-#define S3C2410_PA_IRQ     (0x4A000000)
-#define S3C24XX_SZ_IRQ     SZ_1M
-
-/* memory controller registers */
-#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
-#define S3C2410_PA_MEMCTRL (0x48000000)
-#define S3C24XX_SZ_MEMCTRL SZ_1M
-
 /* USB host controller */
 #define S3C2410_PA_USBHOST (0x49000000)
-#define S3C24XX_SZ_USBHOST SZ_1M
 
 /* DMA controller */
 #define S3C2410_PA_DMA     (0x4B000000)
 #define S3C24XX_SZ_DMA     SZ_1M
 
 /* Clock and Power management */
-#define S3C24XX_VA_CLKPWR  S3C_VA_SYS
 #define S3C2410_PA_CLKPWR  (0x4C000000)
-#define S3C24XX_SZ_CLKPWR  SZ_1M
 
 /* LCD controller */
 #define S3C2410_PA_LCD     (0x4D000000)
@@ -48,48 +34,12 @@
 
 /* NAND flash controller */
 #define S3C2410_PA_NAND    (0x4E000000)
-#define S3C24XX_SZ_NAND    SZ_1M
-
-/* UARTs */
-#define S3C24XX_VA_UART    S3C_VA_UART
-#define S3C2410_PA_UART    (0x50000000)
-#define S3C24XX_SZ_UART    SZ_1M
-
-/* Timers */
-#define S3C24XX_VA_TIMER   S3C_VA_TIMER
-#define S3C2410_PA_TIMER   (0x51000000)
-#define S3C24XX_SZ_TIMER   SZ_1M
-
-/* USB Device port */
-#define S3C2410_PA_USBDEV  (0x52000000)
-#define S3C24XX_SZ_USBDEV  SZ_1M
-
-/* Watchdog */
-#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
-#define S3C2410_PA_WATCHDOG (0x53000000)
-#define S3C24XX_SZ_WATCHDOG SZ_1M
 
 /* IIC hardware controller */
 #define S3C2410_PA_IIC     (0x54000000)
-#define S3C24XX_SZ_IIC     SZ_1M
 
 /* IIS controller */
 #define S3C2410_PA_IIS     (0x55000000)
-#define S3C24XX_SZ_IIS     SZ_1M
-
-/* GPIO ports */
-
-/* the calculation for the VA of this must ensure that
- * it is the same distance apart from the UART in the
- * phsyical address space, as the initial mapping for the IO
- * is done as a 1:1 maping. This puts it (currently) at
- * 0xFA800000, which is not in the way of any current mapping
- * by the base system.
-*/
-
-#define S3C2410_PA_GPIO    (0x56000000)
-#define S3C24XX_VA_GPIO    ((S3C2410_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
-#define S3C24XX_SZ_GPIO    SZ_1M
 
 /* RTC */
 #define S3C2410_PA_RTC     (0x57000000)
@@ -97,15 +47,12 @@
 
 /* ADC */
 #define S3C2410_PA_ADC     (0x58000000)
-#define S3C24XX_SZ_ADC     SZ_1M
 
 /* SPI */
 #define S3C2410_PA_SPI     (0x59000000)
-#define S3C24XX_SZ_SPI     SZ_1M
 
 /* SDI */
 #define S3C2410_PA_SDI     (0x5A000000)
-#define S3C24XX_SZ_SDI     SZ_1M
 
 /* CAMIF */
 #define S3C2440_PA_CAMIF   (0x4F000000)
@@ -120,13 +67,6 @@
 #define S3C2443_PA_HSMMC   (0x4A800000)
 #define S3C2443_SZ_HSMMC   (256)
 
-/* ISA style IO, for each machine to sort out mappings for, if it
- * implements it. We reserve two 16M regions for ISA.
- */
-
-#define S3C24XX_VA_ISA_WORD  S3C2410_ADDR(0x02000000)
-#define S3C24XX_VA_ISA_BYTE  S3C2410_ADDR(0x03000000)
-
 /* physical addresses of all the chip-select areas */
 
 #define S3C2410_CS0 (0x00000000)
@@ -152,27 +92,16 @@
 #define S3C24XX_PA_TIMER    S3C2410_PA_TIMER
 #define S3C24XX_PA_USBDEV   S3C2410_PA_USBDEV
 #define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
-#define S3C24XX_PA_IIC      S3C2410_PA_IIC
 #define S3C24XX_PA_IIS      S3C2410_PA_IIS
 #define S3C24XX_PA_GPIO     S3C2410_PA_GPIO
 #define S3C24XX_PA_RTC      S3C2410_PA_RTC
 #define S3C24XX_PA_ADC      S3C2410_PA_ADC
 #define S3C24XX_PA_SPI      S3C2410_PA_SPI
+#define S3C24XX_PA_SDI      S3C2410_PA_SDI
+#define S3C24XX_PA_NAND     S3C2410_PA_NAND
 
-/* deal with the registers that move under the 2412/2413 */
-
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
-#ifndef __ASSEMBLY__
-extern void __iomem *s3c24xx_va_gpio2;
-#endif
-#ifdef CONFIG_CPU_S3C2412_ONLY
-#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
-#else
-#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
-#endif
-#else
-#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
-#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
-#endif
+#define S3C_PA_IIC          S3C2410_PA_IIC
+#define S3C_PA_UART         S3C24XX_PA_UART
+#define S3C_PA_HSMMC0       S3C2443_PA_HSMMC
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
index b3f90aa78076..2a5d90e957fb 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
@@ -42,13 +42,6 @@
 #define S3C2410_CLKCON_IIS           (1<<17)
 #define S3C2410_CLKCON_SPI           (1<<18)
 
-#define S3C2410_PLLCON_MDIVSHIFT     12
-#define S3C2410_PLLCON_PDIVSHIFT     4
-#define S3C2410_PLLCON_SDIVSHIFT     0
-#define S3C2410_PLLCON_MDIVMASK      ((1<<(1+(19-12)))-1)
-#define S3C2410_PLLCON_PDIVMASK      ((1<<5)-1)
-#define S3C2410_PLLCON_SDIVMASK      3
-
 /* DCLKCON register addresses in gpio.h */
 
 #define S3C2410_DCLKCON_DCLK0EN      (1<<0)
@@ -76,32 +69,6 @@
 #define S3C2410_CLKSLOW_SLOWVAL(x)      (x)
 #define S3C2410_CLKSLOW_GET_SLOWVAL(x)  ((x) & 7)
 
-#ifndef __ASSEMBLY__
-
-#include <asm/div64.h>
-
-static inline unsigned int
-s3c2410_get_pll(unsigned int pllval, unsigned int baseclk)
-{
-        unsigned int mdiv, pdiv, sdiv;
-        uint64_t fvco;
-
-        mdiv = pllval >> S3C2410_PLLCON_MDIVSHIFT;
-        pdiv = pllval >> S3C2410_PLLCON_PDIVSHIFT;
-        sdiv = pllval >> S3C2410_PLLCON_SDIVSHIFT;
-
-        mdiv &= S3C2410_PLLCON_MDIVMASK;
-        pdiv &= S3C2410_PLLCON_PDIVMASK;
-        sdiv &= S3C2410_PLLCON_SDIVMASK;
-
-        fvco = (uint64_t)baseclk * (mdiv + 8);
-        do_div(fvco, (pdiv + 2) << sdiv);
-
-        return (unsigned int)fvco;
-}
-
-#endif /* __ASSEMBLY__ */
-
 #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
 
 /* extra registers */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index 528080ceac44..321077613067 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -1053,13 +1053,6 @@
 #define S3C24XX_EXTINT1    S3C24XX_GPIOREG2(0x8C)
 #define S3C24XX_EXTINT2    S3C24XX_GPIOREG2(0x90)
 
-/* values for S3C2410_EXTINT0/1/2 */
-#define S3C2410_EXTINT_LOWLEV    (0x00)
-#define S3C2410_EXTINT_HILEV     (0x01)
-#define S3C2410_EXTINT_FALLEDGE  (0x02)
-#define S3C2410_EXTINT_RISEEDGE  (0x04)
-#define S3C2410_EXTINT_BOTHEDGE  (0x06)
-
 /* interrupt filtering conrrol for EINT16..EINT23 */
 #define S3C2410_EINFLT0    S3C2410_GPIOREG(0x94)
 #define S3C2410_EINFLT1    S3C2410_GPIOREG(0x98)
diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h
index 46d46f5b99f2..774f3adfe8ad 100644
--- a/arch/arm/mach-s3c2410/include/mach/spi.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi.h
@@ -22,5 +22,12 @@ struct s3c2410_spi_info {
         void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
 };
 
+/* Standard setup / suspend routines for SPI GPIO pins. */
+
+extern void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
+                                                 int enable);
+
+extern void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
+                                              int enable);
 
 #endif /* __ASM_ARCH_SPI_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/tick.h b/arch/arm/mach-s3c2410/include/mach/tick.h
new file mode 100644
index 000000000000..544da41979db
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/tick.h
@@ -0,0 +1,15 @@
+/* linux/arch/arm/mach-s3c2410/include/mach/tick.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C2410 - timer tick support
+ */
+
+#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0))
+
+static inline int s3c24xx_ostimer_pending(void)
+{
+        return __raw_readl(S3C2410_SRCPND) & SRCPND_TIMER4;
+}
diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c2410/include/mach/uncompress.h
index ab39491beee2..c9432103750d 100644
--- a/arch/arm/mach-s3c2410/include/mach/uncompress.h
+++ b/arch/arm/mach-s3c2410/include/mach/uncompress.h
@@ -1,3 +1,4 @@
+
 /* arch/arm/mach-s3c2410/include/mach/uncompress.h
  *
  * Copyright (c) 2003, 2007 Simtec Electronics
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index d061fea01900..6d6995afeb43 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -52,6 +52,7 @@
 #include <mach/regs-lcd.h>
 #include <mach/regs-gpio.h>
 
+#include <plat/iic.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 
@@ -150,7 +151,7 @@ static struct platform_device *amlm5900_devices[] __initdata = {
 #endif
         &s3c_device_adc,
         &s3c_device_wdt,
-        &s3c_device_i2c,
+        &s3c_device_i2c0,
         &s3c_device_usb,
         &s3c_device_rtc,
         &s3c_device_usbgadget,
@@ -233,6 +234,7 @@ static void __init amlm5900_init(void)
 #ifdef CONFIG_FB_S3C2410
         s3c24xx_fb_set_platdata(&amlm5900_fb_info);
 #endif
+        s3c_i2c0_set_platdata(NULL);
         platform_add_devices(amlm5900_devices, ARRAY_SIZE(amlm5900_devices));
 }
 
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index c04c24444e0d..01bd76725b92 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -406,7 +406,7 @@ static struct platform_device bast_sio = {
  * standard 100KHz i2c bus frequency
 */
 
-static struct s3c2410_platform_i2c bast_i2c_info = {
+static struct s3c2410_platform_i2c __initdata bast_i2c_info = {
         .flags          = 0,
         .slave_addr     = 0x10,
         .bus_freq       = 100*1000,
@@ -553,7 +553,7 @@ static struct platform_device *bast_devices[] __initdata = {
         &s3c_device_usb,
         &s3c_device_lcd,
         &s3c_device_wdt,
-        &s3c_device_i2c,
+        &s3c_device_i2c0,
         &s3c_device_rtc,
         &s3c_device_nand,
         &bast_device_dm9k,
@@ -588,7 +588,8 @@ static void __init bast_map_io(void)
         s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
 
         s3c_device_nand.dev.platform_data = &bast_nand_info;
-        s3c_device_i2c.dev.platform_data = &bast_i2c_info;
+
+        s3c_i2c0_set_platdata(&bast_i2c_info);
 
         s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
         s3c24xx_init_clocks(0);
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 32d550fcff4d..821a1668c3ac 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -39,10 +39,12 @@
 #include <mach/h1940-latch.h>
 #include <mach/fb.h>
 #include <plat/udc.h>
+#include <plat/iic.h>
 
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/pll.h>
 #include <plat/pm.h>
 
 static struct map_desc h1940_iodesc[] __initdata = {
@@ -183,7 +185,7 @@ static struct platform_device *h1940_devices[] __initdata = {
         &s3c_device_usb,
         &s3c_device_lcd,
         &s3c_device_wdt,
-        &s3c_device_i2c,
+        &s3c_device_i2c0,
         &s3c_device_iis,
         &s3c_device_usbgadget,
         &s3c_device_leds,
@@ -215,6 +217,7 @@ static void __init h1940_init(void)
 
         s3c24xx_fb_set_platdata(&h1940_fb_info);
         s3c24xx_udc_set_platdata(&h1940_udc_cfg);
+        s3c_i2c0_set_platdata(NULL);
 
         /* Turn off suspend on both USB ports, and switch the
          * selectable USB port to USB device mode. */
@@ -223,10 +226,9 @@ static void __init h1940_init(void)
                               S3C2410_MISCCR_USBSUSPND0 |
                               S3C2410_MISCCR_USBSUSPND1, 0x0);
 
-        tmp = (
-                 0x78 << S3C2410_PLLCON_MDIVSHIFT)
-              | (0x02 << S3C2410_PLLCON_PDIVSHIFT)
-              | (0x03 << S3C2410_PLLCON_SDIVSHIFT);
+        tmp =   (0x78 << S3C24XX_PLLCON_MDIVSHIFT)
+              | (0x02 << S3C24XX_PLLCON_PDIVSHIFT)
+              | (0x03 << S3C24XX_PLLCON_SDIVSHIFT);
         writel(tmp, S3C2410_UPLLCON);
 
         platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 7a7c45d28fe7..05a5e877b49b 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -17,7 +17,6 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 
-#include <linux/delay.h>
 #include <linux/gpio_keys.h>
 #include <linux/init.h>
 #include <linux/input.h>
@@ -320,7 +319,7 @@ static struct s3c2410fb_mach_info n30_fb_info __initdata = {
 static struct platform_device *n30_devices[] __initdata = {
         &s3c_device_lcd,
         &s3c_device_wdt,
-        &s3c_device_i2c,
+        &s3c_device_i2c0,
         &s3c_device_iis,
         &s3c_device_usb,
         &s3c_device_usbgadget,
@@ -332,7 +331,7 @@ static struct platform_device *n30_devices[] __initdata = {
 static struct platform_device *n35_devices[] __initdata = {
         &s3c_device_lcd,
         &s3c_device_wdt,
-        &s3c_device_i2c,
+        &s3c_device_i2c0,
         &s3c_device_iis,
         &s3c_device_usbgadget,
         &n35_button_device,
@@ -501,7 +500,7 @@ static void __init n30_init_irq(void)
 static void __init n30_init(void)
 {
         s3c24xx_fb_set_platdata(&n30_fb_info);
-        s3c_device_i2c.dev.platform_data = &n30_i2ccfg;
+        s3c_device_i2c0.dev.platform_data = &n30_i2ccfg;
         s3c24xx_udc_set_platdata(&n30_udc_cfg);
 
         /* Turn off suspend on both USB ports, and switch the
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index d8255cf87e44..f6c7261a4a12 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -35,6 +35,7 @@
 #include <plat/s3c2410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
+#include <plat/iic.h>
 #include <plat/cpu.h>
 
 static struct map_desc otom11_iodesc[] __initdata = {
@@ -94,7 +95,7 @@ static struct platform_device *otom11_devices[] __initdata = {
         &s3c_device_usb,
         &s3c_device_lcd,
         &s3c_device_wdt,
-        &s3c_device_i2c,
+        &s3c_device_i2c0,
         &s3c_device_iis,
         &s3c_device_rtc,
         &otom_device_nor,
@@ -109,6 +110,7 @@ static void __init otom11_map_io(void)
 
 static void __init otom11_init(void)
 {
+        s3c_i2c0_set_platdata(NULL);
         platform_add_devices(otom11_devices, ARRAY_SIZE(otom11_devices));
 }
 
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index ef868472f6a4..9678a53ceeb1 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -54,6 +54,7 @@
 #include <plat/udc.h>
 #include <mach/spi.h>
 #include <mach/spi-gpio.h>
+#include <plat/iic.h>
 
 #include <plat/common-smdk.h>
 #include <plat/devs.h>
@@ -247,7 +248,7 @@ static struct platform_device *qt2410_devices[] __initdata = {
         &s3c_device_usb,
         &s3c_device_lcd,
         &s3c_device_wdt,
-        &s3c_device_i2c,
+        &s3c_device_i2c0,
         &s3c_device_iis,
         &s3c_device_sdi,
         &s3c_device_usbgadget,
@@ -349,6 +350,7 @@ static void __init qt2410_machine_init(void)
         s3c2410_gpio_setpin(S3C2410_GPB0, 1);
 
         s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
+        s3c_i2c0_set_platdata(NULL);
 
         s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT);
 
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index 152527bb2872..c49126ccb1d5 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -47,6 +47,7 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
+#include <plat/iic.h>
 
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -89,7 +90,7 @@ static struct platform_device *smdk2410_devices[] __initdata = {
         &s3c_device_usb,
         &s3c_device_lcd,
         &s3c_device_wdt,
-        &s3c_device_i2c,
+        &s3c_device_i2c0,
         &s3c_device_iis,
 };
 
@@ -102,6 +103,7 @@ static void __init smdk2410_map_io(void)
 
 static void __init smdk2410_init(void)
 {
+        s3c_i2c0_set_platdata(NULL);
         platform_add_devices(smdk2410_devices, ARRAY_SIZE(smdk2410_devices));
         smdk_machine_init();
 }
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index 309dcf4c870a..8fdb0430bd48 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -45,6 +45,7 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
+#include <plat/iic.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 
@@ -127,7 +128,7 @@ static struct s3c2410_uartcfg tct_hammer_uartcfgs[] = {
 static struct platform_device *tct_hammer_devices[] __initdata = {
         &s3c_device_adc,
         &s3c_device_wdt,
-        &s3c_device_i2c,
+        &s3c_device_i2c0,
         &s3c_device_usb,
         &s3c_device_rtc,
         &s3c_device_usbgadget,
@@ -146,6 +147,7 @@ static void __init tct_hammer_map_io(void)
 
 static void __init tct_hammer_init(void)
 {
+        s3c_i2c0_set_platdata(NULL);
         platform_add_devices(tct_hammer_devices, ARRAY_SIZE(tct_hammer_devices));
 }
 
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 941353af16dc..61a1ea9c5c5c 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -47,6 +47,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/iic.h>
 
 #include "usb-simtec.h"
 #include "nor-simtec.h"
@@ -334,7 +335,7 @@ static struct platform_device *vr1000_devices[] __initdata = {
         &s3c_device_usb,
         &s3c_device_lcd,
         &s3c_device_wdt,
-        &s3c_device_i2c,
+        &s3c_device_i2c0,
         &s3c_device_adc,
         &serial_device,
         &vr1000_dm9k0,
@@ -384,6 +385,7 @@ static void __init vr1000_map_io(void)
 
 static void __init vr1000_init(void)
 {
+        s3c_i2c0_set_platdata(NULL);
         platform_add_devices(vr1000_devices, ARRAY_SIZE(vr1000_devices));
 
         i2c_register_board_info(0, vr1000_i2c_devs,
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index ac79b536c4c3..feb141b1f915 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -16,6 +16,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/clk.h>
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
@@ -28,6 +29,8 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 
+#include <plat/cpu-freq.h>
+
 #include <mach/regs-clock.h>
 #include <plat/regs-serial.h>
 
@@ -35,6 +38,7 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/clock.h>
+#include <plat/pll.h>
 
 /* Initial IO mappings */
 
@@ -59,25 +63,28 @@ void __init s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no)
  * machine specific initialisation.
 */
 
-void __init s3c2410_map_io(struct map_desc *mach_desc, int mach_size)
+void __init s3c2410_map_io(void)
 {
-        /* register our io-tables */
-
         iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc));
-        iotable_init(mach_desc, mach_size);
 }
 
-void __init s3c2410_init_clocks(int xtal)
+void __init_or_cpufreq s3c2410_setup_clocks(void)
 {
+        struct clk *xtal_clk;
         unsigned long tmp;
+        unsigned long xtal;
         unsigned long fclk;
         unsigned long hclk;
         unsigned long pclk;
 
+        xtal_clk = clk_get(NULL, "xtal");
+        xtal = clk_get_rate(xtal_clk);
+        clk_put(xtal_clk);
+
         /* now we've got our machine bits initialised, work out what
          * clocks we've got */
 
-        fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal);
+        fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal);
 
         tmp = __raw_readl(S3C2410_CLKDIVN);
 
@@ -95,7 +102,13 @@ void __init s3c2410_init_clocks(int xtal)
          * console to use them
          */
 
-        s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
+        s3c24xx_setup_clocks(fclk, hclk, pclk);
+}
+
+void __init s3c2410_init_clocks(int xtal)
+{
+        s3c24xx_register_baseclocks(xtal);
+        s3c2410_setup_clocks();
         s3c2410_baseclk_add();
 }
 
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
index 96d9eb15424f..a037df5e1c2d 100644
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -93,12 +93,6 @@ static int s3c2412_upll_enable(struct clk *clk, int enable)
 
 /* clock selections */
 
-/* CPU EXTCLK input */
-static struct clk clk_ext = {
-        .name           = "extclk",
-        .id             = -1,
-};
-
 static struct clk clk_erefclk = {
         .name           = "erefclk",
         .id             = -1,
@@ -773,5 +767,6 @@ int __init s3c2412_baseclk_add(void)
                 s3c2412_clkcon_enable(clkp, 0);
         }
 
+        s3c_pwmclk_init();
         return 0;
 }
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 25ff1ec9f8ad..ecddbbb34832 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -17,7 +17,6 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/sysdev.h>
-#include <linux/delay.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
@@ -53,6 +52,7 @@
 #include <plat/cpu.h>
 #include <plat/pm.h>
 #include <plat/udc.h>
+#include <plat/iic.h>
 
 static struct map_desc jive_iodesc[] __initdata = {
 };
@@ -398,11 +398,12 @@ static struct s3c2410_spigpio_info jive_lcd_spi = {
         .bus_num        = 1,
         .pin_clk        = S3C2410_GPG8,
         .pin_mosi       = S3C2410_GPB8,
+        .num_chipselect = 1,
         .chip_select    = jive_lcd_spi_chipselect,
 };
 
 static struct platform_device jive_device_lcdspi = {
-        .name           = "s3c24xx-spi-gpio",
+        .name           = "spi_s3c24xx_gpio",
         .id             = 1,
         .num_resources  = 0,
         .dev.platform_data = &jive_lcd_spi,
@@ -419,11 +420,12 @@ static struct s3c2410_spigpio_info jive_wm8750_spi = {
         .bus_num        = 2,
         .pin_clk        = S3C2410_GPB4,
         .pin_mosi       = S3C2410_GPB9,
+        .num_chipselect = 1,
         .chip_select    = jive_wm8750_chipselect,
 };
 
 static struct platform_device jive_device_wm8750 = {
-        .name           = "s3c24xx-spi-gpio",
+        .name           = "spi_s3c24xx_gpio",
         .id             = 2,
         .num_resources  = 0,
         .dev.platform_data = &jive_wm8750_spi,
@@ -450,14 +452,14 @@ static struct spi_board_info __initdata jive_spi_devs[] = {
 
 /* I2C bus and device configuration. */
 
-static struct s3c2410_platform_i2c jive_i2c_cfg = {
+static struct s3c2410_platform_i2c jive_i2c_cfg __initdata = {
         .max_freq       = 80 * 1000,
         .bus_freq       = 50 * 1000,
         .flags          = S3C_IICFLG_FILTER,
         .sda_delay      = 2,
 };
 
-static struct i2c_board_info jive_i2c_devs[] = {
+static struct i2c_board_info jive_i2c_devs[] __initdata = {
         [0] = {
                 I2C_BOARD_INFO("lis302dl", 0x1c),
                 .irq    = IRQ_EINT14,
@@ -470,7 +472,7 @@ static struct platform_device *jive_devices[] __initdata = {
         &s3c_device_usb,
         &s3c_device_rtc,
         &s3c_device_wdt,
-        &s3c_device_i2c,
+        &s3c_device_i2c0,
         &s3c_device_lcd,
         &jive_device_lcdspi,
         &jive_device_wm8750,
@@ -663,7 +665,7 @@ static void __init jive_machine_init(void)
 
         spi_register_board_info(jive_spi_devs, ARRAY_SIZE(jive_spi_devs));
 
-        s3c_device_i2c.dev.platform_data = &jive_i2c_cfg;
+        s3c_i2c0_set_platdata(&jive_i2c_cfg);
         i2c_register_board_info(0, jive_i2c_devs, ARRAY_SIZE(jive_i2c_devs));
 
         pm_power_off = jive_power_off;
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 8fd17b8d5679..eba66aa6bd20 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -38,6 +38,7 @@
 
 #include <mach/idle.h>
 #include <plat/udc.h>
+#include <plat/iic.h>
 #include <mach/fb.h>
 
 #include <plat/s3c2410.h>
@@ -105,7 +106,7 @@ static struct platform_device *smdk2413_devices[] __initdata = {
         &s3c_device_usb,
         //&s3c_device_lcd,
         &s3c_device_wdt,
-        &s3c_device_i2c,
+        &s3c_device_i2c0,
         &s3c_device_iis,
         &s3c_device_usbgadget,
 };
@@ -142,6 +143,7 @@ static void __init smdk2413_machine_init(void)
 
 
         s3c24xx_udc_set_platdata(&smdk2413_udc_cfg);
+        s3c_i2c0_set_platdata(NULL);
 
         platform_add_devices(smdk2413_devices, ARRAY_SIZE(smdk2413_devices));
         smdk_machine_init();
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index da32a6cb17ae..11e8ad49fc7b 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -39,6 +39,7 @@
 #include <mach/idle.h>
 #include <mach/fb.h>
 
+#include <plat/iic.h>
 #include <plat/nand.h>
 
 #include <plat/s3c2410.h>
@@ -122,7 +123,7 @@ static struct s3c2410_platform_nand vstms_nand_info = {
 static struct platform_device *vstms_devices[] __initdata = {
         &s3c_device_usb,
         &s3c_device_wdt,
-        &s3c_device_i2c,
+        &s3c_device_i2c0,
         &s3c_device_iis,
         &s3c_device_rtc,
         &s3c_device_nand,
@@ -151,6 +152,7 @@ static void __init vstms_map_io(void)
 
 static void __init vstms_init(void)
 {
+        s3c_i2c0_set_platdata(NULL);
         platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices));
 }
 
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index a086818e117e..5b5aba69ec3f 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -16,6 +16,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
@@ -33,6 +34,8 @@
 #include <mach/reset.h>
 #include <mach/idle.h>
 
+#include <plat/cpu-freq.h>
+
 #include <mach/regs-clock.h>
 #include <plat/regs-serial.h>
 #include <mach/regs-power.h>
@@ -47,6 +50,7 @@
 #include <plat/devs.h>
 #include <plat/clock.h>
 #include <plat/pm.h>
+#include <plat/pll.h>
 
 #ifndef CONFIG_CPU_S3C2412_ONLY
 void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
@@ -136,7 +140,7 @@ static void s3c2412_hard_reset(void)
  * machine specific initialisation.
 */
 
-void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size)
+void __init s3c2412_map_io(void)
 {
         /* move base of IO */
 
@@ -153,20 +157,25 @@ void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size)
         /* register our io-tables */
 
         iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc));
-        iotable_init(mach_desc, mach_size);
 }
 
-void __init s3c2412_init_clocks(int xtal)
+void __init_or_cpufreq s3c2412_setup_clocks(void)
 {
+        struct clk *xtal_clk;
         unsigned long tmp;
+        unsigned long xtal;
         unsigned long fclk;
         unsigned long hclk;
         unsigned long pclk;
 
+        xtal_clk = clk_get(NULL, "xtal");
+        xtal = clk_get_rate(xtal_clk);
+        clk_put(xtal_clk);
+
         /* now we've got our machine bits initialised, work out what
          * clocks we've got */
 
-        fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal*2);
+        fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal * 2);
 
         clk_mpll.rate = fclk;
 
@@ -183,11 +192,17 @@ void __init s3c2412_init_clocks(int xtal)
         printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
                print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
 
+        s3c24xx_setup_clocks(fclk, hclk, pclk);
+}
+
+void __init s3c2412_init_clocks(int xtal)
+{
         /* initialise the clocks here, to allow other things like the
          * console to use them
          */
 
-        s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
+        s3c24xx_register_baseclocks(xtal);
+        s3c2412_setup_clocks();
         s3c2412_baseclk_add();
 }
 
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 0429d255b0d8..cde5ae9a4340 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -29,8 +29,10 @@ menu "S3C2440 Machines"
 config MACH_ANUBIS
         bool "Simtec Electronics ANUBIS"
         select CPU_S3C2440
+        select S3C24XX_DCLK
         select PM_SIMTEC if PM
         select HAVE_PATA_PLATFORM
+        select S3C24XX_GPIO_EXTRA64
         help
           Say Y here if you are using the Simtec Electronics ANUBIS
           development system
@@ -38,7 +40,9 @@ config MACH_ANUBIS
 config MACH_OSIRIS
         bool "Simtec IM2440D20 (OSIRIS) module"
         select CPU_S3C2440
+        select S3C24XX_DCLK
         select PM_SIMTEC if PM
+        select S3C24XX_GPIO_EXTRA128
         help
           Say Y here if you are using the Simtec IM2440D20 module, also
           known as the Osiris.
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 334379bdfc6e..b05d56e230a1 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -40,6 +40,7 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <plat/nand.h>
+#include <plat/iic.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -366,6 +367,8 @@ static struct sm501_initdata anubis_sm501_initdata = {
                 .mask   = 0,
         },
 
+        .devices        = SM501_USE_GPIO,
+
         /* set the SDRAM and bus clocks */
         .mclk           = 72 * MHZ,
         .m1xclk         = 144 * MHZ,
@@ -373,10 +376,12 @@ static struct sm501_initdata anubis_sm501_initdata = {
 
 static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = {
         [0] = {
+                .bus_num        = 1,
                 .pin_scl        = 44,
                 .pin_sda        = 45,
         },
         [1] = {
+                .bus_num        = 2,
                 .pin_scl        = 40,
                 .pin_sda        = 41,
         },
@@ -384,6 +389,7 @@ static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = {
 
 static struct sm501_platdata anubis_sm501_platdata = {
         .init           = &anubis_sm501_initdata,
+        .gpio_base      = -1,
         .gpio_i2c       = anubis_sm501_gpio_i2c,
         .gpio_i2c_nr    = ARRAY_SIZE(anubis_sm501_gpio_i2c),
 };
@@ -404,7 +410,7 @@ static struct platform_device *anubis_devices[] __initdata = {
         &s3c_device_usb,
         &s3c_device_wdt,
         &s3c_device_adc,
-        &s3c_device_i2c,
+        &s3c_device_i2c0,
         &s3c_device_rtc,
         &s3c_device_nand,
         &anubis_device_ide0,
@@ -468,6 +474,7 @@ static void __init anubis_map_io(void)
 
 static void __init anubis_init(void)
 {
+        s3c_i2c0_set_platdata(NULL);
         platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
 
         i2c_register_board_info(0, anubis_i2c_devs,
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index 07b42a0207d1..0a6d0a5d961b 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -28,6 +28,7 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
+#include <mach/fb.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
@@ -36,6 +37,7 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <plat/nand.h>
+#include <plat/iic.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -45,6 +47,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <asm/plat-s3c24xx/mci.h>
 
 static struct map_desc at2440evb_iodesc[] __initdata = {
         /* Nothing here */
@@ -162,19 +165,60 @@ static struct platform_device at2440evb_device_eth = {
         },
 };
 
+static struct s3c24xx_mci_pdata at2440evb_mci_pdata = {
+        .gpio_detect    = S3C2410_GPG10,
+};
+
+/* 7" LCD panel */
+
+static struct s3c2410fb_display at2440evb_lcd_cfg __initdata = {
+
+        .lcdcon5        = S3C2410_LCDCON5_FRM565 |
+                          S3C2410_LCDCON5_INVVLINE |
+                          S3C2410_LCDCON5_INVVFRAME |
+                          S3C2410_LCDCON5_PWREN |
+                          S3C2410_LCDCON5_HWSWP,
+
+        .type           = S3C2410_LCDCON1_TFT,
+
+        .width          = 800,
+        .height         = 480,
+
+        .pixclock       = 33333, /* HCLK 60 MHz, divisor 2 */
+        .xres           = 800,
+        .yres           = 480,
+        .bpp            = 16,
+        .left_margin    = 88,
+        .right_margin   = 40,
+        .hsync_len      = 128,
+        .upper_margin   = 32,
+        .lower_margin   = 11,
+        .vsync_len      = 2,
+};
+
+static struct s3c2410fb_mach_info at2440evb_fb_info __initdata = {
+        .displays       = &at2440evb_lcd_cfg,
+        .num_displays   = 1,
+        .default_display = 0,
+};
+
 static struct platform_device *at2440evb_devices[] __initdata = {
         &s3c_device_usb,
         &s3c_device_wdt,
         &s3c_device_adc,
-        &s3c_device_i2c,
+        &s3c_device_i2c0,
         &s3c_device_rtc,
         &s3c_device_nand,
+        &s3c_device_sdi,
+        &s3c_device_lcd,
         &at2440evb_device_eth,
 };
 
 static void __init at2440evb_map_io(void)
 {
         s3c_device_nand.dev.platform_data = &at2440evb_nand_info;
+        s3c_device_sdi.name = "s3c2440-sdi";
+        s3c_device_sdi.dev.platform_data = &at2440evb_mci_pdata;
 
         s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
         s3c24xx_init_clocks(16934400);
@@ -183,6 +227,9 @@ static void __init at2440evb_map_io(void)
 
 static void __init at2440evb_init(void)
 {
+        s3c24xx_fb_set_platdata(&at2440evb_fb_info);
+        s3c_i2c0_set_platdata(NULL);
+
         platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices));
 }
 
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index a546307fd53d..7aeaa972d7f5 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -37,6 +37,7 @@
 //#include <asm/debug-ll.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-serial.h>
+#include <plat/iic.h>
 
 #include <plat/s3c2410.h>
 #include <plat/s3c2440.h>
@@ -107,7 +108,7 @@ static struct platform_device *nexcoder_devices[] __initdata = {
         &s3c_device_usb,
         &s3c_device_lcd,
         &s3c_device_wdt,
-        &s3c_device_i2c,
+        &s3c_device_i2c0,
         &s3c_device_iis,
         &s3c_device_rtc,
         &s3c_device_camif,
@@ -142,6 +143,7 @@ static void __init nexcoder_map_io(void)
 
 static void __init nexcoder_init(void)
 {
+        s3c_i2c0_set_platdata(NULL);
         platform_add_devices(nexcoder_devices, ARRAY_SIZE(nexcoder_devices));
 };
 
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 884a3c7ae75f..41a00f57e5da 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -38,6 +38,7 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <plat/nand.h>
+#include <plat/iic.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -335,7 +336,7 @@ static struct i2c_board_info osiris_i2c_devs[] __initdata = {
 /* Standard Osiris devices */
 
 static struct platform_device *osiris_devices[] __initdata = {
-        &s3c_device_i2c,
+        &s3c_device_i2c0,
         &s3c_device_wdt,
         &s3c_device_nand,
         &osiris_pcmcia,
@@ -398,6 +399,8 @@ static void __init osiris_init(void)
         sysdev_class_register(&osiris_pm_sysclass);
         sysdev_register(&osiris_pm_sysdev);
 
+        s3c_i2c0_set_platdata(NULL);
+
         i2c_register_board_info(0, osiris_i2c_devs,
                                 ARRAY_SIZE(osiris_i2c_devs));
 
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index fbd081de592f..12d378f84ad2 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -179,7 +179,7 @@ static struct platform_device *rx3715_devices[] __initdata = {
         &s3c_device_usb,
         &s3c_device_lcd,
         &s3c_device_wdt,
-        &s3c_device_i2c,
+        &s3c_device_i2c0,
         &s3c_device_iis,
         &s3c_device_nand,
 };
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index fefeaaa4155f..db6eafbd4d90 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -37,6 +37,7 @@
 
 #include <mach/idle.h>
 #include <mach/fb.h>
+#include <plat/iic.h>
 
 #include <plat/s3c2410.h>
 #include <plat/s3c2440.h>
@@ -152,7 +153,7 @@ static struct platform_device *smdk2440_devices[] __initdata = {
         &s3c_device_usb,
         &s3c_device_lcd,
         &s3c_device_wdt,
-        &s3c_device_i2c,
+        &s3c_device_i2c0,
         &s3c_device_iis,
 };
 
@@ -166,6 +167,7 @@ static void __init smdk2440_map_io(void)
 static void __init smdk2440_machine_init(void)
 {
         s3c24xx_fb_set_platdata(&smdk2440_fb_info);
+        s3c_i2c0_set_platdata(NULL);
 
         platform_add_devices(smdk2440_devices, ARRAY_SIZE(smdk2440_devices));
         smdk_machine_init();
diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
index 14252f573754..212141baebec 100644
--- a/arch/arm/mach-s3c2443/Kconfig
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -24,6 +24,7 @@ config MACH_SMDK2443
         bool "SMDK2443"
         select CPU_S3C2443
         select MACH_SMDK
+        select S3C_DEV_HSMMC
         help
           Say Y here if you are using an SMDK2443
 
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index f854e7385e3c..2785d69c95b0 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -29,7 +29,6 @@
 #include <linux/sysdev.h>
 #include <linux/clk.h>
 #include <linux/mutex.h>
-#include <linux/delay.h>
 #include <linux/serial_core.h>
 #include <linux/io.h>
 
@@ -39,6 +38,8 @@
 
 #include <mach/regs-s3c2443-clock.h>
 
+#include <plat/cpu-freq.h>
+
 #include <plat/s3c2443.h>
 #include <plat/clock.h>
 #include <plat/cpu.h>
@@ -145,12 +146,6 @@ static unsigned long s3c2443_roundrate_clksrc256(struct clk *clk,
 
 /* clock selections */
 
-/* CPU EXTCLK input */
-static struct clk clk_ext = {
-        .name           = "ext",
-        .id             = -1,
-};
-
 static struct clk clk_mpllref = {
         .name           = "mpllref",
         .parent         = &clk_xtal,
@@ -165,14 +160,6 @@ static struct clk clk_mpll = {
 };
 #endif
 
-static struct clk clk_epllref;
-
-static struct clk clk_epll = {
-        .name           = "epll",
-        .parent         = &clk_epllref,
-        .id             = -1,
-};
-
 static struct clk clk_i2s_ext = {
         .name           = "i2s-ext",
         .id             = -1,
@@ -1011,22 +998,20 @@ static struct clk *clks[] __initdata = {
         &clk_prediv,
 };
 
-void __init s3c2443_init_clocks(int xtal)
+void __init_or_cpufreq s3c2443_setup_clocks(void)
 {
-        unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
         unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
         unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
+        struct clk *xtal_clk;
+        unsigned long xtal;
         unsigned long pll;
         unsigned long fclk;
         unsigned long hclk;
         unsigned long pclk;
-        struct clk *clkp;
-        int ret;
-        int ptr;
 
-        /* s3c2443 parents h and p clocks from prediv */
-        clk_h.parent = &clk_prediv;
-        clk_p.parent = &clk_prediv;
+        xtal_clk = clk_get(NULL, "xtal");
+        xtal = clk_get_rate(xtal_clk);
+        clk_put(xtal_clk);
 
         pll = s3c2443_get_mpll(mpllcon, xtal);
         clk_msysclk.rate = pll;
@@ -1036,13 +1021,29 @@ void __init s3c2443_init_clocks(int xtal)
         hclk /= s3c2443_get_hdiv(clkdiv0);
         pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
 
-        s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
+        s3c24xx_setup_clocks(fclk, hclk, pclk);
 
         printk("S3C2443: mpll %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
                (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on",
                print_mhz(pll), print_mhz(fclk),
                print_mhz(hclk), print_mhz(pclk));
 
+        s3c24xx_setup_clocks(fclk, hclk, pclk);
+}
+
+void __init s3c2443_init_clocks(int xtal)
+{
+        struct clk *clkp;
+        unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
+        int ret;
+        int ptr;
+
+        /* s3c2443 parents h and p clocks from prediv */
+        clk_h.parent = &clk_prediv;
+        clk_p.parent = &clk_prediv;
+
+        s3c24xx_register_baseclocks(xtal);
+        s3c2443_setup_clocks();
         s3c2443_clk_initparents();
 
         for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
@@ -1056,7 +1057,7 @@ void __init s3c2443_init_clocks(int xtal)
         }
 
         clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
-
+        clk_epll.parent = &clk_epllref;
         clk_usb_bus.parent = &clk_usb_bus_host;
 
         /* ensure usb bus clock is within correct rate of 48MHz */
@@ -1105,4 +1106,6 @@ void __init s3c2443_init_clocks(int xtal)
 
                 (clkp->enable)(clkp, 0);
         }
+
+        s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index a7fe65f3dcc1..039a46243105 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -37,6 +37,7 @@
 
 #include <mach/idle.h>
 #include <mach/fb.h>
+#include <plat/iic.h>
 
 #include <plat/s3c2410.h>
 #include <plat/s3c2440.h>
@@ -103,8 +104,8 @@ static struct s3c2410_uartcfg smdk2443_uartcfgs[] __initdata = {
 
 static struct platform_device *smdk2443_devices[] __initdata = {
         &s3c_device_wdt,
-        &s3c_device_i2c,
-        &s3c_device_hsmmc,
+        &s3c_device_i2c0,
+        &s3c_device_hsmmc0,
 };
 
 static void __init smdk2443_map_io(void)
@@ -116,6 +117,7 @@ static void __init smdk2443_map_io(void)
 
 static void __init smdk2443_machine_init(void)
 {
+        s3c_i2c0_set_platdata(NULL);
         platform_add_devices(smdk2443_devices, ARRAY_SIZE(smdk2443_devices));
         smdk_machine_init();
 }
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index bbeddf9ddcb1..ce2ec3298930 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -81,10 +81,9 @@ void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no)
  * machine specific initialisation.
  */
 
-void __init s3c2443_map_io(struct map_desc *mach_desc, int mach_size)
+void __init s3c2443_map_io(void)
 {
         iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
-        iotable_init(mach_desc, mach_size);
 }
 
 /* need to register class before we actually register the device, and
diff --git a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
new file mode 100644
index 000000000000..f0ef0ab475f6
--- /dev/null
+++ b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
@@ -0,0 +1,28 @@
+/* arch/arm/mach-s3c2410/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+        .macro addruart, rx
+                mrc     p15, 0, \rx, c1, c0
+                tst     \rx, #1
+                ldreq   \rx, = S3C24XX_PA_UART
+                ldrne   \rx, = S3C24XX_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+                add     \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
+#endif
+        .endm
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s3c24a0/include/mach/irqs.h b/arch/arm/mach-s3c24a0/include/mach/irqs.h
new file mode 100644
index 000000000000..ae8c0e359783
--- /dev/null
+++ b/arch/arm/mach-s3c24a0/include/mach/irqs.h
@@ -0,0 +1,115 @@
+/* linux/arch/arm/mach-s3c24a0/include/mach/irqs.h
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ *   Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+
+#ifndef __ASM_ARCH_24A0_IRQS_H
+#define __ASM_ARCH_24A0_IRQS_H __FILE__
+
+#define IRQ_EINT0t2     S3C2410_IRQ(0)  /* 16 */
+/* for generic entry-macro.S */
+#define IRQ_EINT0       IRQ_EINT0t2
+
+#define IRQ_EINT3t6     S3C2410_IRQ(1)
+#define IRQ_EINT7t10    S3C2410_IRQ(2)
+#define IRQ_EINT11t14   S3C2410_IRQ(3)
+#define IRQ_EINT15t18   S3C2410_IRQ(4)  /* 20 */
+#define IRQ_TICK        S3C2410_IRQ(5)
+#define IRQ_DCTQ        S3C2410_IRQ(6)
+#define IRQ_MC          S3C2410_IRQ(7)
+#define IRQ_ME          S3C2410_IRQ(8)  /* 24 */
+#define IRQ_KEYPAD      S3C2410_IRQ(9)
+#define IRQ_TIMER0      S3C2410_IRQ(10)
+#define IRQ_TIMER1      S3C2410_IRQ(11)
+#define IRQ_TIMER2      S3C2410_IRQ(12)
+#define IRQ_TIMER3_4    S3C2410_IRQ(13)
+#define IRQ_OS_TIMER    IRQ_TIMER3_4
+#define IRQ_LCD         S3C2410_IRQ(14)
+#define IRQ_CAM_C       S3C2410_IRQ(15)
+#define IRQ_WDT_BATFLT  S3C2410_IRQ(16) /* 32 */
+#define IRQ_UART0       S3C2410_IRQ(17)
+#define IRQ_CAM_P       S3C2410_IRQ(18)
+#define IRQ_MODEM       S3C2410_IRQ(19)
+#define IRQ_DMA         S3C2410_IRQ(20)
+#define IRQ_SDI         S3C2410_IRQ(21)
+#define IRQ_SPI0        S3C2410_IRQ(22)
+#define IRQ_UART1       S3C2410_IRQ(23)
+#define IRQ_AC97_NFLASH S3C2410_IRQ(24) /* 40 */
+#define IRQ_USBD        S3C2410_IRQ(25)
+#define IRQ_USBH        S3C2410_IRQ(26)
+#define IRQ_IIC         S3C2410_IRQ(27)
+#define IRQ_IRDA_MSTICK S3C2410_IRQ(28) /* 44 */
+#define IRQ_VLX_SPI1    S3C2410_IRQ(29)
+#define IRQ_RTC         S3C2410_IRQ(30) /* 46 */
+#define IRQ_ADC_PEN     S3C2410_IRQ(31)
+
+/* interrupts generated from the external interrupts sources */
+#define IRQ_EINT00      S3C2410_IRQ(32) /* 48 */
+#define IRQ_EINT1       S3C2410_IRQ(33)
+#define IRQ_EINT2       S3C2410_IRQ(34)
+#define IRQ_EINT3       S3C2410_IRQ(35)
+#define IRQ_EINT4       S3C2410_IRQ(36)
+#define IRQ_EINT5       S3C2410_IRQ(37)
+#define IRQ_EINT6       S3C2410_IRQ(38)
+#define IRQ_EINT7       S3C2410_IRQ(39)
+#define IRQ_EINT8       S3C2410_IRQ(40)
+#define IRQ_EINT9       S3C2410_IRQ(41)
+#define IRQ_EINT10      S3C2410_IRQ(42)
+#define IRQ_EINT11      S3C2410_IRQ(43)
+#define IRQ_EINT12      S3C2410_IRQ(44)
+#define IRQ_EINT13      S3C2410_IRQ(45)
+#define IRQ_EINT14      S3C2410_IRQ(46)
+#define IRQ_EINT15      S3C2410_IRQ(47)
+#define IRQ_EINT16      S3C2410_IRQ(48)
+#define IRQ_EINT17      S3C2410_IRQ(49)
+#define IRQ_EINT18      S3C2410_IRQ(50)
+
+/* SUB IRQS */
+#define IRQ_S3CUART_RX0         S3C2410_IRQ(51) /* 67 */
+#define IRQ_S3CUART_TX0         S3C2410_IRQ(52)
+#define IRQ_S3CUART_ERR0        S3C2410_IRQ(53)
+
+#define IRQ_S3CUART_RX1         S3C2410_IRQ(54)
+#define IRQ_S3CUART_TX1         S3C2410_IRQ(55)
+#define IRQ_S3CUART_ERR1        S3C2410_IRQ(56)
+
+#define IRQ_S3CUART_RX2         (0x0)
+#define IRQ_S3CUART_TX2         (0x0)
+#define IRQ_S3CUART_ERR2        (0x0)
+
+
+#define IRQ_IRDA        S3C2410_IRQ(57)
+#define IRQ_MSTICK      S3C2410_IRQ(58)
+#define IRQ_RESERVED0   S3C2410_IRQ(59)
+#define IRQ_RESERVED1   S3C2410_IRQ(60)
+#define IRQ_RESERVED2   S3C2410_IRQ(61)
+#define IRQ_TIMER3      S3C2410_IRQ(62)
+#define IRQ_TIMER4      S3C2410_IRQ(63)
+#define IRQ_WDT         S3C2410_IRQ(64)
+#define IRQ_BATFLT      S3C2410_IRQ(65)
+#define IRQ_POST        S3C2410_IRQ(66)
+#define IRQ_DISP_FIFO   S3C2410_IRQ(67)
+#define IRQ_PENUP       S3C2410_IRQ(68)
+#define IRQ_PENDN       S3C2410_IRQ(69)
+#define IRQ_ADC         S3C2410_IRQ(70)
+#define IRQ_DISP_FRAME  S3C2410_IRQ(71)
+#define IRQ_NFLASH      S3C2410_IRQ(72)
+#define IRQ_AC97        S3C2410_IRQ(73)
+#define IRQ_SPI1        S3C2410_IRQ(74)
+#define IRQ_VLX         S3C2410_IRQ(75)
+#define IRQ_DMA0        S3C2410_IRQ(76)
+#define IRQ_DMA1        S3C2410_IRQ(77)
+#define IRQ_DMA2        S3C2410_IRQ(78)
+#define IRQ_DMA3        S3C2410_IRQ(79)
+
+#define IRQ_TC          (0x0)
+
+#define NR_IRQS         (IRQ_DMA3+1)
+
+#endif /* __ASM_ARCH_24A0_IRQS_H */
diff --git a/arch/arm/mach-s3c24a0/include/mach/map.h b/arch/arm/mach-s3c24a0/include/mach/map.h
new file mode 100644
index 000000000000..a01132717e34
--- /dev/null
+++ b/arch/arm/mach-s3c24a0/include/mach/map.h
@@ -0,0 +1,85 @@
+/* linux/arch/arm/mach-s3c24a0/include/mach/map.h
+ *
+ * Copyright 2003,2007  Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24A0 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_24A0_MAP_H
+#define __ASM_ARCH_24A0_MAP_H __FILE__
+
+#include <plat/map-base.h>
+#include <plat/map.h>
+
+#define S3C24A0_PA_IO_BASE      (0x40000000)
+#define S3C24A0_PA_CLKPWR       (0x40000000)
+#define S3C24A0_PA_IRQ          (0x40200000)
+#define S3C24A0_PA_DMA          (0x40400000)
+#define S3C24A0_PA_MEMCTRL      (0x40C00000)
+#define S3C24A0_PA_NAND         (0x40C00000)
+#define S3C24A0_PA_SROM         (0x40C20000)
+#define S3C24A0_PA_SDRAM        (0x40C40000)
+#define S3C24A0_PA_BUSM         (0x40CE0000)
+#define S3C24A0_PA_USBHOST      (0x41000000)
+#define S3C24A0_PA_MODEMIF      (0x41180000)
+#define S3C24A0_PA_IRDA         (0x41800000)
+#define S3C24A0_PA_TIMER        (0x44000000)
+#define S3C24A0_PA_WATCHDOG     (0x44100000)
+#define S3C24A0_PA_RTC          (0x44200000)
+#define S3C24A0_PA_UART         (0x44400000)
+#define S3C24A0_PA_UART0        (S3C24A0_PA_UART)
+#define S3C24A0_PA_UART1        (S3C24A0_PA_UART + 0x4000)
+#define S3C24A0_PA_SPI          (0x44500000)
+#define S3C24A0_PA_IIC          (0x44600000)
+#define S3C24A0_PA_IIS          (0x44700000)
+#define S3C24A0_PA_GPIO         (0x44800000)
+#define S3C24A0_PA_KEYIF        (0x44900000)
+#define S3C24A0_PA_USBDEV       (0x44A00000)
+#define S3C24A0_PA_AC97         (0x45000000)
+#define S3C24A0_PA_ADC          (0x45800000)
+#define S3C24A0_PA_SDI          (0x46000000)
+#define S3C24A0_PA_MS           (0x46100000)
+#define S3C24A0_PA_LCD          (0x4A000000)
+#define S3C24A0_PA_VPOST        (0x4A100000)
+
+/* physical addresses of all the chip-select areas */
+
+#define S3C24A0_CS0     (0x00000000)
+#define S3C24A0_CS1     (0x04000000)
+#define S3C24A0_CS2     (0x08000000)
+#define S3C24A0_CS3     (0x0C000000)
+#define S3C24A0_CS4     (0x10000000)
+#define S3C24A0_CS5     (0x40000000)
+
+#define S3C24A0_SDRAM_PA        (S3C24A0_CS4)
+
+/* Use a single interface for common resources between S3C24XX cpus */
+
+#define S3C24XX_PA_IRQ          S3C24A0_PA_IRQ
+#define S3C24XX_PA_MEMCTRL      S3C24A0_PA_MEMCTRL
+#define S3C24XX_PA_USBHOST      S3C24A0_PA_USBHOST
+#define S3C24XX_PA_DMA          S3C24A0_PA_DMA
+#define S3C24XX_PA_CLKPWR       S3C24A0_PA_CLKPWR
+#define S3C24XX_PA_LCD          S3C24A0_PA_LCD
+#define S3C24XX_PA_UART         S3C24A0_PA_UART
+#define S3C24XX_PA_TIMER        S3C24A0_PA_TIMER
+#define S3C24XX_PA_USBDEV       S3C24A0_PA_USBDEV
+#define S3C24XX_PA_WATCHDOG     S3C24A0_PA_WATCHDOG
+#define S3C24XX_PA_IIS          S3C24A0_PA_IIS
+#define S3C24XX_PA_GPIO         S3C24A0_PA_GPIO
+#define S3C24XX_PA_RTC          S3C24A0_PA_RTC
+#define S3C24XX_PA_ADC          S3C24A0_PA_ADC
+#define S3C24XX_PA_SPI          S3C24A0_PA_SPI
+#define S3C24XX_PA_SDI          S3C24A0_PA_SDI
+#define S3C24XX_PA_NAND         S3C24A0_PA_NAND
+
+#define S3C_PA_UART             S3C24A0_PA_UART
+#define S3C_PA_IIC              S3C24A0_PA_IIC
+
+#endif /* __ASM_ARCH_24A0_MAP_H */
diff --git a/arch/arm/mach-s3c24a0/include/mach/memory.h b/arch/arm/mach-s3c24a0/include/mach/memory.h
new file mode 100644
index 000000000000..585211ca0187
--- /dev/null
+++ b/arch/arm/mach-s3c24a0/include/mach/memory.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s3c24a0/include/mach/memory.h
+ *  from linux/include/asm-arm/arch-rpc/memory.h
+ *
+ *  Copyright (C) 1996,1997,1998 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_24A0_MEMORY_H
+#define __ASM_ARCH_24A0_MEMORY_H __FILE__
+
+#define PHYS_OFFSET UL(0x10000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/arch/arm/mach-s3c24a0/include/mach/regs-clock.h b/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
new file mode 100644
index 000000000000..af2abd756c30
--- /dev/null
+++ b/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
@@ -0,0 +1,88 @@
+/* linux/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
+ *                    http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C24A0 clock register definitions
+*/
+
+#ifndef __ASM_ARCH_24A0_REGS_CLOCK_H
+#define __ASM_ARCH_24A0_REGS_CLOCK_H __FILE__
+
+#define S3C24A0_MPLLCON         S3C2410_CLKREG(0x10)
+#define S3C24A0_UPLLCON         S3C2410_CLKREG(0x14)
+#define S3C24A0_CLKCON          S3C2410_CLKREG(0x20)
+#define S3C24A0_CLKSRC          S3C2410_CLKREG(0x24)
+#define S3C24A0_CLKDIVN         S3C2410_CLKREG(0x28)
+
+/* CLKCON register bits */
+
+#define S3C24A0_CLKCON_VLX      (1<<29)
+#define S3C24A0_CLKCON_VPOST    (1<<28)
+#define S3C24A0_CLKCON_WDT      (1<<27) /* reserved */
+#define S3C24A0_CLKCON_MPEGDCTQ (1<<26)
+#define S3C24A0_CLKCON_VPOSTIF  (1<<25)
+#define S3C24A0_CLKCON_MPEG4IF  (1<<24)
+#define S3C24A0_CLKCON_CAM_UPLL (1<<23)
+#define S3C24A0_CLKCON_LCDC     (1<<22)
+#define S3C24A0_CLKCON_CAM_HCLK (1<<21)
+#define S3C24A0_CLKCON_MPEG4    (1<<20)
+#define S3C24A0_CLKCON_KEYPAD   (1<<19)
+#define S3C24A0_CLKCON_ADC      (1<<18)
+#define S3C24A0_CLKCON_SDI      (1<<17)
+#define S3C24A0_CLKCON_MS       (1<<16) /* memory stick */
+#define S3C24A0_CLKCON_USBD     (1<<15)
+#define S3C24A0_CLKCON_GPIO     (1<<14)
+#define S3C24A0_CLKCON_IIS      (1<<13)
+#define S3C24A0_CLKCON_IIC      (1<<12)
+#define S3C24A0_CLKCON_SPI      (1<<11)
+#define S3C24A0_CLKCON_UART1    (1<<10)
+#define S3C24A0_CLKCON_UART0    (1<<9)
+#define S3C24A0_CLKCON_PWMT     (1<<8)
+#define S3C24A0_CLKCON_USBH     (1<<7)
+#define S3C24A0_CLKCON_AC97     (1<<6)
+#define S3C24A0_CLKCON_IrDA     (1<<4)
+#define S3C24A0_CLKCON_IDLE     (1<<2)
+#define S3C24A0_CLKCON_MON      (1<<1)
+#define S3C24A0_CLKCON_STOP     (1<<0)
+
+/* CLKSRC register bits */
+
+#define S3C24A0_CLKSRC_OSC      (1<<8)  /* CLKSRC */
+#define S3C24A0_CLKSRC_UPLL     (1<<7)
+#define S3C24A0_CLKSRC_MPLL     (1<<5)
+#define S3C24A0_CLKSRC_EXT      (1<<4)
+
+/* Use a single interface with the common code, for s3c24xx */
+
+#define S3C2410_MPLLCON         S3C24A0_MPLLCON
+#define S3C2410_UPLLCON         S3C24A0_UPLLCON
+#define S3C2410_CLKCON          S3C24A0_CLKCON
+#define S3C2410_CLKSLOW         S3C24A0_CLKSRC
+#define S3C2410_CLKDIVN         S3C24A0_CLKDIVN
+
+#define S3C2410_CLKCON_IDLE     S3C24A0_CLKCON_IDLE
+#define S3C2410_CLKCON_POWER    S3C24A0_CLKCON_STOP
+#define S3C2410_CLKCON_LCDC     S3C24A0_CLKCON_LCDC
+#define S3C2410_CLKCON_USBH     S3C24A0_CLKCON_USBH
+#define S3C2410_CLKCON_USBD     S3C24A0_CLKCON_USBD
+#define S3C2410_CLKCON_PWMT     S3C24A0_CLKCON_PWMT
+#define S3C2410_CLKCON_SDI      S3C24A0_CLKCON_SDI
+#define S3C2410_CLKCON_UART0    S3C24A0_CLKCON_UART0
+#define S3C2410_CLKCON_UART1    S3C24A0_CLKCON_UART1
+#define S3C2410_CLKCON_GPIO     S3C24A0_CLKCON_GPIO
+#define S3C2410_CLKCON_ADC      S3C24A0_CLKCON_ADC
+#define S3C2410_CLKCON_IIC      S3C24A0_CLKCON_IIC
+#define S3C2410_CLKCON_IIS      S3C24A0_CLKCON_IIS
+#define S3C2410_CLKCON_SPI      S3C24A0_CLKCON_SPI
+
+#define S3C2410_CLKSLOW_UCLK_OFF        S3C24A0_CLKSRC_UPLL
+#define S3C2410_CLKSLOW_MPLL_OFF        S3C24A0_CLKSRC_MPLL
+#define S3C2410_CLKSLOW_SLOW            (0xFF)
+#define S3C2410_CLKSLOW_GET_SLOWVAL(x)  (0x1)
+
+#endif /* __ASM_ARCH_24A0_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s3c24a0/include/mach/regs-irq.h b/arch/arm/mach-s3c24a0/include/mach/regs-irq.h
new file mode 100644
index 000000000000..6086f6f189eb
--- /dev/null
+++ b/arch/arm/mach-s3c24a0/include/mach/regs-irq.h
@@ -0,0 +1,25 @@
+/* linux/arch/arm/mach-s3c24a0/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *                    http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+
+#ifndef ___ASM_ARCH_24A0_REGS_IRQ_H
+#define ___ASM_ARCH_24A0_REGS_IRQ_H __FILE__
+
+
+#define S3C2410_EINTMASK        S3C2410_EINTREG(0x034)
+#define S3C2410_EINTPEND        S3C2410_EINTREG(0X038)
+
+#define S3C24XX_EINTMASK        S3C24XX_EINTREG(0x034)
+#define S3C24XX_EINTPEND        S3C24XX_EINTREG(0X038)
+
+#endif /* __ASM_ARCH_24A0_REGS_IRQ_H */
+
+
+
diff --git a/arch/arm/mach-s3c24a0/include/mach/system.h b/arch/arm/mach-s3c24a0/include/mach/system.h
new file mode 100644
index 000000000000..bd1bd1957656
--- /dev/null
+++ b/arch/arm/mach-s3c24a0/include/mach/system.h
@@ -0,0 +1,25 @@
+/* linux/arch/arm/mach-s3c24a0/include/mach/system.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24A0 - System function defines and includes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+#include <mach/map.h>
+
+static void arch_idle(void)
+{
+        /* currently no specific idle support. */
+}
+
+void (*s3c24xx_reset_hook)(void);
+
+#include <asm/plat-s3c24xx/system-reset.h>
diff --git a/arch/arm/mach-s3c24a0/include/mach/tick.h b/arch/arm/mach-s3c24a0/include/mach/tick.h
new file mode 100644
index 000000000000..9dea8ba6fb72
--- /dev/null
+++ b/arch/arm/mach-s3c24a0/include/mach/tick.h
@@ -0,0 +1,15 @@
+/* linux/arch/arm/mach-s3c24a0/include/mach/tick.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C24A0 - timer tick support
+ */
+
+#define SUBSRC_TIMER4   (1 << (IRQ_TIMER4 - IRQ_S3CUART_RX0))
+
+static inline int s3c24xx_ostimer_pending(void)
+{
+        return __raw_readl(S3C2410_SUBSRCPND) & SUBSRC_TIMER4;
+}
diff --git a/arch/arm/mach-s3c24a0/include/mach/timex.h b/arch/arm/mach-s3c24a0/include/mach/timex.h
new file mode 100644
index 000000000000..98573424a016
--- /dev/null
+++ b/arch/arm/mach-s3c24a0/include/mach/timex.h
@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s3c24a0/include/mach/timex.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#define CLOCK_TICK_RATE 12000000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s3c24a0/include/mach/vmalloc.h b/arch/arm/mach-s3c24a0/include/mach/vmalloc.h
new file mode 100644
index 000000000000..4d4fe4849589
--- /dev/null
+++ b/arch/arm/mach-s3c24a0/include/mach/vmalloc.h
@@ -0,0 +1,17 @@
+/* linux/include/asm-arm/arch-s3c24ao/vmalloc.h
+ *
+ * Copyright 2008 Simtec Electronics <linux@simtec.co.uk>
+
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C24A0 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END       (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s3c6400/Kconfig b/arch/arm/mach-s3c6400/Kconfig
new file mode 100644
index 000000000000..6da82b5c09ba
--- /dev/null
+++ b/arch/arm/mach-s3c6400/Kconfig
@@ -0,0 +1,8 @@
+# arch/arm/mach-s3c6400/Kconfig
+#
+# Copyright 2008 Openmoko, Inc.
+#       Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
+#
+# Licensed under GPLv2
+
+# Currently nothing here, this will be added later
diff --git a/arch/arm/mach-s3c6400/Makefile b/arch/arm/mach-s3c6400/Makefile
new file mode 100644
index 000000000000..8f397db25b87
--- /dev/null
+++ b/arch/arm/mach-s3c6400/Makefile
@@ -0,0 +1,15 @@
+# arch/arm/mach-s3c6400/Makefile
+#
+# Copyright 2008 Openmoko, Inc.
+# Copyright 2008 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y                           :=
+obj-m                           :=
+obj-n                           :=
+obj-                            :=
+
+# Core support for S3C6400 system
+
+obj-n                           += blank.o
diff --git a/arch/arm/mach-s3c6400/Makefile.boot b/arch/arm/mach-s3c6400/Makefile.boot
new file mode 100644
index 000000000000..ba41fdc0a586
--- /dev/null
+++ b/arch/arm/mach-s3c6400/Makefile.boot
@@ -0,0 +1,2 @@
+   zreladdr-y   := 0x50008000
+params_phys-y   := 0x50000100
diff --git a/arch/arm/mach-s3c6400/include/mach/debug-macro.S b/arch/arm/mach-s3c6400/include/mach/debug-macro.S
new file mode 100644
index 000000000000..b18ac5266dfc
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/debug-macro.S
@@ -0,0 +1,39 @@
+/* arch/arm/mach-s3c6400/include/mach/debug-macro.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+        /* note, for the boot process to work we have to keep the UART
+         * virtual address aligned to an 1MiB boundary for the L1
+         * mapping the head code makes. We keep the UART virtual address
+         * aligned and add in the offset when we load the value here.
+         */
+
+        .macro addruart, rx
+                mrc     p15, 0, \rx, c1, c0
+                tst     \rx, #1
+                ldreq   \rx, = S3C_PA_UART
+                ldrne   \rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+#if CONFIG_DEBUG_S3C_UART != 0
+                add     \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
+        .endm
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s3c6400/include/mach/dma.h b/arch/arm/mach-s3c6400/include/mach/dma.h
new file mode 100644
index 000000000000..9771ac2cb07e
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/dma.h
@@ -0,0 +1,16 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/dma.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - DMA support
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/entry-macro.S b/arch/arm/mach-s3c6400/include/mach/entry-macro.S
new file mode 100644
index 000000000000..fbd90d2cf355
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/entry-macro.S
@@ -0,0 +1,44 @@
+/* arch/arm/mach-s3c6400/include/mach/entry-macro.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * Low-level IRQ helper macros for the Samsung S3C64XX series
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+#include <plat/irqs.h>
+
+        .macro  disable_fiq
+        .endm
+
+        .macro  get_irqnr_preamble, base, tmp
+        ldr     \base, =S3C_VA_VIC0
+        .endm
+
+        .macro  arch_ret_to_user, tmp1, tmp2
+        .endm
+
+        .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+        @ check the vic0
+        mov     \irqnr, # S3C_IRQ_OFFSET + 31
+        ldr     \irqstat, [ \base, # VIC_IRQ_STATUS ]
+        teq     \irqstat, #0
+
+        @ otherwise try vic1
+        addeq   \tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0)
+        addeq   \irqnr, \irqnr, #32
+        ldreq   \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+        teqeq   \irqstat, #0
+
+        clzne   \irqstat, \irqstat
+        subne   \irqnr, \irqnr, \irqstat
+        .endm
diff --git a/arch/arm/mach-s3c6400/include/mach/gpio-core.h b/arch/arm/mach-s3c6400/include/mach/gpio-core.h
new file mode 100644
index 000000000000..d89aae68b0a5
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/gpio-core.h
@@ -0,0 +1,21 @@
+/* arch/arm/mach-s3c6400/include/mach/gpio-core.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - GPIO core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_CORE_H
+#define __ASM_ARCH_GPIO_CORE_H __FILE__
+
+/* currently we just include the platform support */
+#include <plat/gpio-core.h>
+
+#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/gpio.h b/arch/arm/mach-s3c6400/include/mach/gpio.h
new file mode 100644
index 000000000000..e8e35e8fe731
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/gpio.h
@@ -0,0 +1,96 @@
+/* arch/arm/mach-s3c6400/include/mach/gpio.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C6400 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define gpio_get_value  __gpio_get_value
+#define gpio_set_value  __gpio_set_value
+#define gpio_cansleep   __gpio_cansleep
+#define gpio_to_irq     __gpio_to_irq
+
+/* GPIO bank sizes */
+#define S3C64XX_GPIO_A_NR       (8)
+#define S3C64XX_GPIO_B_NR       (7)
+#define S3C64XX_GPIO_C_NR       (8)
+#define S3C64XX_GPIO_D_NR       (5)
+#define S3C64XX_GPIO_E_NR       (5)
+#define S3C64XX_GPIO_F_NR       (16)
+#define S3C64XX_GPIO_G_NR       (7)
+#define S3C64XX_GPIO_H_NR       (10)
+#define S3C64XX_GPIO_I_NR       (16)
+#define S3C64XX_GPIO_J_NR       (12)
+#define S3C64XX_GPIO_K_NR       (16)
+#define S3C64XX_GPIO_L_NR       (15)
+#define S3C64XX_GPIO_M_NR       (6)
+#define S3C64XX_GPIO_N_NR       (16)
+#define S3C64XX_GPIO_O_NR       (16)
+#define S3C64XX_GPIO_P_NR       (15)
+#define S3C64XX_GPIO_Q_NR       (9)
+
+/* GPIO bank numbes */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S3C64XX_GPIO_NEXT(__gpio) \
+        ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s3c_gpio_number {
+        S3C64XX_GPIO_A_START = 0,
+        S3C64XX_GPIO_B_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_A),
+        S3C64XX_GPIO_C_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_B),
+        S3C64XX_GPIO_D_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_C),
+        S3C64XX_GPIO_E_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_D),
+        S3C64XX_GPIO_F_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_E),
+        S3C64XX_GPIO_G_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_F),
+        S3C64XX_GPIO_H_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_G),
+        S3C64XX_GPIO_I_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_H),
+        S3C64XX_GPIO_J_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_I),
+        S3C64XX_GPIO_K_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_J),
+        S3C64XX_GPIO_L_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_K),
+        S3C64XX_GPIO_M_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_L),
+        S3C64XX_GPIO_N_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_M),
+        S3C64XX_GPIO_O_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_N),
+        S3C64XX_GPIO_P_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_O),
+        S3C64XX_GPIO_Q_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_P),
+};
+
+/* S3C64XX GPIO number definitions. */
+
+#define S3C64XX_GPA(_nr)        (S3C64XX_GPIO_A_START + (_nr))
+#define S3C64XX_GPB(_nr)        (S3C64XX_GPIO_B_START + (_nr))
+#define S3C64XX_GPC(_nr)        (S3C64XX_GPIO_C_START + (_nr))
+#define S3C64XX_GPD(_nr)        (S3C64XX_GPIO_D_START + (_nr))
+#define S3C64XX_GPE(_nr)        (S3C64XX_GPIO_E_START + (_nr))
+#define S3C64XX_GPF(_nr)        (S3C64XX_GPIO_F_START + (_nr))
+#define S3C64XX_GPG(_nr)        (S3C64XX_GPIO_G_START + (_nr))
+#define S3C64XX_GPH(_nr)        (S3C64XX_GPIO_H_START + (_nr))
+#define S3C64XX_GPI(_nr)        (S3C64XX_GPIO_I_START + (_nr))
+#define S3C64XX_GPJ(_nr)        (S3C64XX_GPIO_J_START + (_nr))
+#define S3C64XX_GPK(_nr)        (S3C64XX_GPIO_K_START + (_nr))
+#define S3C64XX_GPL(_nr)        (S3C64XX_GPIO_L_START + (_nr))
+#define S3C64XX_GPM(_nr)        (S3C64XX_GPIO_M_START + (_nr))
+#define S3C64XX_GPN(_nr)        (S3C64XX_GPIO_N_START + (_nr))
+#define S3C64XX_GPO(_nr)        (S3C64XX_GPIO_O_START + (_nr))
+#define S3C64XX_GPP(_nr)        (S3C64XX_GPIO_P_START + (_nr))
+#define S3C64XX_GPQ(_nr)        (S3C64XX_GPIO_Q_START + (_nr))
+
+/* the end of the S3C64XX specific gpios */
+#define S3C64XX_GPIO_END        (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+#define S3C_GPIO_END            S3C64XX_GPIO_END
+
+/* define the number of gpios we need to the one after the GPQ() range */
+#define ARCH_NR_GPIOS   (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+
+#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s3c6400/include/mach/hardware.h b/arch/arm/mach-s3c6400/include/mach/hardware.h
new file mode 100644
index 000000000000..862d033e57a4
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/hardware.h
@@ -0,0 +1,16 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/hardware.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - Hardware support
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/irqs.h b/arch/arm/mach-s3c6400/include/mach/irqs.h
new file mode 100644
index 000000000000..b38c47cffc28
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/irqs.h
@@ -0,0 +1,20 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/irqs.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - IRQ definitions
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#ifndef __ASM_ARM_IRQ_H
+#error "Do not include this directly, instead #include <asm/irq.h>"
+#endif
+
+#include <plat/irqs.h>
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
new file mode 100644
index 000000000000..cff27d813fc6
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -0,0 +1,68 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/map.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+
+/* HSMMC units */
+#define S3C64XX_PA_HSMMC(x)     (0x7C200000 + ((x) * 0x100000))
+#define S3C64XX_PA_HSMMC0       S3C64XX_PA_HSMMC(0)
+#define S3C64XX_PA_HSMMC1       S3C64XX_PA_HSMMC(1)
+#define S3C64XX_PA_HSMMC2       S3C64XX_PA_HSMMC(2)
+
+#define S3C_PA_UART             (0x7F005000)
+#define S3C_PA_UART0            (S3C_PA_UART + 0x00)
+#define S3C_PA_UART1            (S3C_PA_UART + 0x400)
+#define S3C_PA_UART2            (S3C_PA_UART + 0x800)
+#define S3C_PA_UART3            (S3C_PA_UART + 0xC00)
+#define S3C_UART_OFFSET         (0x400)
+
+/* See notes on UART VA mapping in debug-macro.S */
+#define S3C_VA_UARTx(x) (S3C_VA_UART + (S3C_PA_UART & 0xfffff) + ((x) * S3C_UART_OFFSET))
+
+#define S3C_VA_UART0            S3C_VA_UARTx(0)
+#define S3C_VA_UART1            S3C_VA_UARTx(1)
+#define S3C_VA_UART2            S3C_VA_UARTx(2)
+#define S3C_VA_UART3            S3C_VA_UARTx(3)
+
+#define S3C64XX_PA_FB           (0x77100000)
+#define S3C64XX_PA_SYSCON       (0x7E00F000)
+#define S3C64XX_PA_TIMER        (0x7F006000)
+#define S3C64XX_PA_IIC0         (0x7F004000)
+#define S3C64XX_PA_IIC1         (0x7F00F000)
+
+#define S3C64XX_PA_GPIO         (0x7F008000)
+#define S3C64XX_VA_GPIO         S3C_ADDR(0x00500000)
+#define S3C64XX_SZ_GPIO         SZ_4K
+
+#define S3C64XX_PA_SDRAM        (0x50000000)
+#define S3C64XX_PA_VIC0         (0x71200000)
+#define S3C64XX_PA_VIC1         (0x71300000)
+
+/* place VICs close together */
+#define S3C_VA_VIC0             (S3C_VA_IRQ + 0x00)
+#define S3C_VA_VIC1             (S3C_VA_IRQ + 0x10000)
+
+/* compatibiltiy defines. */
+#define S3C_PA_TIMER            S3C64XX_PA_TIMER
+#define S3C_PA_HSMMC0           S3C64XX_PA_HSMMC0
+#define S3C_PA_HSMMC1           S3C64XX_PA_HSMMC1
+#define S3C_PA_HSMMC2           S3C64XX_PA_HSMMC2
+#define S3C_PA_IIC              S3C64XX_PA_IIC0
+#define S3C_PA_IIC1             S3C64XX_PA_IIC1
+#define S3C_PA_FB               S3C64XX_PA_FB
+
+#endif /* __ASM_ARCH_6400_MAP_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/memory.h b/arch/arm/mach-s3c6400/include/mach/memory.h
new file mode 100644
index 000000000000..a3ac84a65480
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/memory.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s3c6400/include/mach/memory.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET     UL(0x50000000)
+
+#endif
diff --git a/arch/arm/mach-s3c6400/include/mach/pwm-clock.h b/arch/arm/mach-s3c6400/include/mach/pwm-clock.h
new file mode 100644
index 000000000000..b25bedee0d52
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/pwm-clock.h
@@ -0,0 +1,56 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/pwm-clock.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64xx - pwm clock and timer support
+ */
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @tcfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+        return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+        return 1 << tcfg1;
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+        return 1;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+        return ilog2(div);
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
diff --git a/arch/arm/mach-s3c6400/include/mach/regs-fb.h b/arch/arm/mach-s3c6400/include/mach/regs-fb.h
new file mode 100644
index 000000000000..47019795ce06
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/regs-fb.h
@@ -0,0 +1,259 @@
+/* arch/arm/mach-s3c6400/include/mach/regs-fb.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - new-style framebuffer register definitions
+ *
+ * This is the register set for the new style framebuffer interface
+ * found from the S3C2443 onwards and specifically the S3C64XX series
+ * S3C6400 and S3C6410.
+ *
+ * The file contains the cpu specific items which change between whichever
+ * architecture is selected. See <plat/regs-fb.h> for the core definitions
+ * that are the same.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* include the core definitions here, in case we really do need to
+ * override them at a later date.
+*/
+
+#include <plat/regs-fb.h>
+
+#define S3C_FB_MAX_WIN (5)  /* number of hardware windows available. */
+#define VIDCON1_FSTATUS_EVEN    (1 << 15)
+
+/* Video timing controls */
+#define VIDTCON0                                (0x10)
+#define VIDTCON1                                (0x14)
+#define VIDTCON2                                (0x18)
+
+/* Window position controls */
+
+#define WINCON(_win)                            (0x20 + ((_win) * 4))
+
+/* OSD1 and OSD4 do not have register D */
+
+#define VIDOSD_A(_win)                          (0x40 + ((_win) * 16))
+#define VIDOSD_B(_win)                          (0x44 + ((_win) * 16))
+#define VIDOSD_C(_win)                          (0x48 + ((_win) * 16))
+#define VIDOSD_D(_win)                          (0x4C + ((_win) * 16))
+
+/* Video buffer addresses */
+
+#define VIDW_BUF_START(_buff)                   (0xA0 + ((_buff) * 8))
+#define VIDW_BUF_START1(_buff)                  (0xA4 + ((_buff) * 8))
+#define VIDW_BUF_END(_buff)                     (0xD0 + ((_buff) * 8))
+#define VIDW_BUF_END1(_buff)                    (0xD4 + ((_buff) * 8))
+#define VIDW_BUF_SIZE(_buff)                    (0x100 + ((_buff) * 4))
+
+#define VIDINTCON0                              (0x130)
+
+#define WxKEYCONy(_win, _con)                   ((0x140 + ((_win) * 8)) + ((_con) * 4))
+
+/* WINCONx */
+
+#define WINCONx_CSCWIDTH_MASK                   (0x3 << 26)
+#define WINCONx_CSCWIDTH_SHIFT                  (26)
+#define WINCONx_CSCWIDTH_WIDE                   (0x0 << 26)
+#define WINCONx_CSCWIDTH_NARROW                 (0x3 << 26)
+
+#define WINCONx_ENLOCAL                         (1 << 22)
+#define WINCONx_BUFSTATUS                       (1 << 21)
+#define WINCONx_BUFSEL                          (1 << 20)
+#define WINCONx_BUFAUTOEN                       (1 << 19)
+#define WINCONx_YCbCr                           (1 << 13)
+
+#define WINCON1_LOCALSEL_CAMIF                  (1 << 23)
+
+#define WINCON2_LOCALSEL_CAMIF                  (1 << 23)
+#define WINCON2_BLD_PIX                         (1 << 6)
+
+#define WINCON2_ALPHA_SEL                       (1 << 1)
+#define WINCON2_BPPMODE_MASK                    (0xf << 2)
+#define WINCON2_BPPMODE_SHIFT                   (2)
+#define WINCON2_BPPMODE_1BPP                    (0x0 << 2)
+#define WINCON2_BPPMODE_2BPP                    (0x1 << 2)
+#define WINCON2_BPPMODE_4BPP                    (0x2 << 2)
+#define WINCON2_BPPMODE_8BPP_1232               (0x4 << 2)
+#define WINCON2_BPPMODE_16BPP_565               (0x5 << 2)
+#define WINCON2_BPPMODE_16BPP_A1555             (0x6 << 2)
+#define WINCON2_BPPMODE_16BPP_I1555             (0x7 << 2)
+#define WINCON2_BPPMODE_18BPP_666               (0x8 << 2)
+#define WINCON2_BPPMODE_18BPP_A1665             (0x9 << 2)
+#define WINCON2_BPPMODE_19BPP_A1666             (0xa << 2)
+#define WINCON2_BPPMODE_24BPP_888               (0xb << 2)
+#define WINCON2_BPPMODE_24BPP_A1887             (0xc << 2)
+#define WINCON2_BPPMODE_25BPP_A1888             (0xd << 2)
+#define WINCON2_BPPMODE_28BPP_A4888             (0xd << 2)
+
+#define WINCON3_BLD_PIX                         (1 << 6)
+
+#define WINCON3_ALPHA_SEL                       (1 << 1)
+#define WINCON3_BPPMODE_MASK                    (0xf << 2)
+#define WINCON3_BPPMODE_SHIFT                   (2)
+#define WINCON3_BPPMODE_1BPP                    (0x0 << 2)
+#define WINCON3_BPPMODE_2BPP                    (0x1 << 2)
+#define WINCON3_BPPMODE_4BPP                    (0x2 << 2)
+#define WINCON3_BPPMODE_16BPP_565               (0x5 << 2)
+#define WINCON3_BPPMODE_16BPP_A1555             (0x6 << 2)
+#define WINCON3_BPPMODE_16BPP_I1555             (0x7 << 2)
+#define WINCON3_BPPMODE_18BPP_666               (0x8 << 2)
+#define WINCON3_BPPMODE_18BPP_A1665             (0x9 << 2)
+#define WINCON3_BPPMODE_19BPP_A1666             (0xa << 2)
+#define WINCON3_BPPMODE_24BPP_888               (0xb << 2)
+#define WINCON3_BPPMODE_24BPP_A1887             (0xc << 2)
+#define WINCON3_BPPMODE_25BPP_A1888             (0xd << 2)
+#define WINCON3_BPPMODE_28BPP_A4888             (0xd << 2)
+
+#define VIDINTCON0_FIFIOSEL_WINDOW2             (0x10 << 5)
+#define VIDINTCON0_FIFIOSEL_WINDOW3             (0x20 << 5)
+#define VIDINTCON0_FIFIOSEL_WINDOW4             (0x40 << 5)
+
+#define DITHMODE                                (0x170)
+#define WINxMAP(_win)                           (0x180 + ((_win) * 4))
+
+
+#define DITHMODE_R_POS_MASK                     (0x3 << 5)
+#define DITHMODE_R_POS_SHIFT                    (5)
+#define DITHMODE_R_POS_8BIT                     (0x0 << 5)
+#define DITHMODE_R_POS_6BIT                     (0x1 << 5)
+#define DITHMODE_R_POS_5BIT                     (0x2 << 5)
+
+#define DITHMODE_G_POS_MASK                     (0x3 << 3)
+#define DITHMODE_G_POS_SHIFT                    (3)
+#define DITHMODE_G_POS_8BIT                     (0x0 << 3)
+#define DITHMODE_G_POS_6BIT                     (0x1 << 3)
+#define DITHMODE_G_POS_5BIT                     (0x2 << 3)
+
+#define DITHMODE_B_POS_MASK                     (0x3 << 1)
+#define DITHMODE_B_POS_SHIFT                    (1)
+#define DITHMODE_B_POS_8BIT                     (0x0 << 1)
+#define DITHMODE_B_POS_6BIT                     (0x1 << 1)
+#define DITHMODE_B_POS_5BIT                     (0x2 << 1)
+
+#define DITHMODE_DITH_EN                        (1 << 0)
+
+#define WPALCON                                 (0x1A0)
+
+#define WPALCON_W4PAL_16BPP_A555                (1 << 8)
+#define WPALCON_W3PAL_16BPP_A555                (1 << 7)
+#define WPALCON_W2PAL_16BPP_A555                (1 << 6)
+
+/* Palette registers */
+
+#define WIN2_PAL(_entry)                        (0x300 + ((_entry) * 2))
+#define WIN3_PAL(_entry)                        (0x320 + ((_entry) * 2))
+#define WIN4_PAL(_entry)                        (0x340 + ((_entry) * 2))
+#define WIN0_PAL(_entry)                        (0x400 + ((_entry) * 4))
+#define WIN1_PAL(_entry)                        (0x800 + ((_entry) * 4))
+
+/* system specific implementation code for palette sizes, and other
+ * information that changes depending on which architecture is being
+ * compiled.
+*/
+
+/* return true if window _win has OSD register D */
+#define s3c_fb_has_osd_d(_win) ((_win) != 4 && (_win) != 0)
+
+static inline unsigned int s3c_fb_win_pal_size(unsigned int win)
+{
+        if (win < 2)
+                return 256;
+        if (win < 4)
+                return 16;
+        if (win == 4)
+                return 4;
+
+        BUG();  /* shouldn't get here */
+}
+
+static inline int s3c_fb_validate_win_bpp(unsigned int win, unsigned int bpp)
+{
+        /* all windows can do 1/2 bpp */
+
+        if ((bpp == 25 || bpp == 19) && win == 0)
+                return 0;       /* win 0 does not have 19 or 25bpp modes */
+
+        if (bpp == 4 && win == 4)
+                return 0;
+
+        if (bpp == 8 && (win >= 3))
+                return 0;       /* win 3/4 cannot do 8bpp in any mode */
+
+        return 1;
+}
+
+static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg)
+{
+        switch (window) {
+        case 0: return WIN0_PAL(reg);
+        case 1: return WIN1_PAL(reg);
+        case 2: return WIN2_PAL(reg);
+        case 3: return WIN3_PAL(reg);
+        case 4: return WIN4_PAL(reg);
+        }
+
+        BUG();
+}
+
+static inline int s3c_fb_pal_is16(unsigned int window)
+{
+        return window > 1;
+}
+
+struct s3c_fb_palette {
+        struct fb_bitfield      r;
+        struct fb_bitfield      g;
+        struct fb_bitfield      b;
+        struct fb_bitfield      a;
+};
+
+static inline void s3c_fb_init_palette(unsigned int window,
+                                       struct s3c_fb_palette *palette)
+{
+        if (window < 2) {
+                /* Windows 0/1 are 8/8/8 or A/8/8/8 */
+                palette->r.offset = 16;
+                palette->r.length = 8;
+                palette->g.offset = 8;
+                palette->g.length = 8;
+                palette->b.offset = 0;
+                palette->b.length = 8;
+        } else {
+                /* currently we assume RGB 5/6/5 */
+                palette->r.offset = 11;
+                palette->r.length = 5;
+                palette->g.offset = 5;
+                palette->g.length = 6;
+                palette->b.offset = 0;
+                palette->b.length = 5;
+        }
+}
+
+/* Notes on per-window bpp settings
+ *
+ * Value        Win0     Win1     Win2     Win3     Win 4
+ * 0000         1(P)     1(P)     1(P)     1(P)     1(P)
+ * 0001         2(P)     2(P)     2(P)     2(P)     2(P)
+ * 0010         4(P)     4(P)     4(P)     4(P)     -none-
+ * 0011         8(P)     8(P)     -none-   -none-   -none-
+ * 0100         -none-   8(A232)  8(A232)  -none-   -none-
+ * 0101         16(565)  16(565)  16(565)  16(565)   16(565)
+ * 0110         -none-   16(A555) 16(A555) 16(A555)  16(A555)
+ * 0111         16(I555) 16(I565) 16(I555) 16(I555)  16(I555)
+ * 1000         18(666)  18(666)  18(666)  18(666)   18(666)
+ * 1001         -none-   18(A665) 18(A665) 18(A665)  16(A665)
+ * 1010         -none-   19(A666) 19(A666) 19(A666)  19(A666)
+ * 1011         24(888)  24(888)  24(888)  24(888)   24(888)
+ * 1100         -none-   24(A887) 24(A887) 24(A887)  24(A887)
+ * 1101         -none-   25(A888) 25(A888) 25(A888)  25(A888)
+ * 1110         -none-   -none-   -none-   -none-    -none-
+ * 1111         -none-   -none-   -none-   -none-    -none-
+*/
diff --git a/arch/arm/mach-s3c6400/include/mach/regs-irq.h b/arch/arm/mach-s3c6400/include/mach/regs-irq.h
new file mode 100644
index 000000000000..bcce68a0bb75
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/regs-irq.h
@@ -0,0 +1,20 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/regs-irq.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <asm/hardware/vic.h>
+
+#endif /* __ASM_ARCH_6400_REGS_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/system.h b/arch/arm/mach-s3c6400/include/mach/system.h
new file mode 100644
index 000000000000..652bbc403f0b
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/system.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/system.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - system implementation
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+static void arch_idle(void)
+{
+        /* nothing here yet */
+}
+
+static void arch_reset(char mode)
+{
+        /* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/tick.h b/arch/arm/mach-s3c6400/include/mach/tick.h
new file mode 100644
index 000000000000..d9c0dc7014ec
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/tick.h
@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/tick.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - Timer tick support definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+/* note, the timer interrutps turn up in 2 places, the vic and then
+ * the timer block. We take the VIC as the base at the moment.
+ */
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+        u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS);
+        return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0));
+}
+
+#define TICK_MAX        (0xffffffff)
+
+#endif /* __ASM_ARCH_6400_TICK_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/uncompress.h b/arch/arm/mach-s3c6400/include/mach/uncompress.h
new file mode 100644
index 000000000000..c6a82a20bf2a
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/uncompress.h
@@ -0,0 +1,28 @@
+/* arch/arm/mach-s3c6400/include/mach/uncompress.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C6400 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+        /* we do not need to do any cpu detection here at the moment. */
+        fifo_mask = S3C2440_UFSTAT_TXMASK;
+        fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
new file mode 100644
index 000000000000..1d5010070027
--- /dev/null
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -0,0 +1,62 @@
+# arch/arm/mach-s3c6410/Kconfig
+#
+# Copyright 2008 Openmoko, Inc.
+# Copyright 2008 Simtec Electronics
+#
+# Licensed under GPLv2
+
+# Configuration options for the S3C6410 CPU
+
+config CPU_S3C6410
+        bool
+        select CPU_S3C6400_INIT
+        select CPU_S3C6400_CLOCK
+        help
+          Enable S3C6410 CPU support
+
+config S3C6410_SETUP_SDHCI
+        bool
+        help
+          Internal helper functions for S3C6410 based SDHCI systems
+
+config MACH_SMDK6410
+        bool "SMDK6410"
+        select CPU_S3C6410
+        select S3C_DEV_HSMMC
+        select S3C_DEV_HSMMC1
+        select S3C_DEV_I2C1
+        select S3C_DEV_FB
+        select S3C6410_SETUP_SDHCI
+        select S3C64XX_SETUP_I2C1
+        select S3C64XX_SETUP_FB_24BPP
+        help
+          Machine support for the Samsung SMDK6410
+
+# At least some of the SMDK6410s were shipped with the card detect
+# for the MMC/SD slots connected to the same input. This means that
+# either the boards need to be altered to have channel0 to an alternate
+# configuration or that only one slot can be used.
+
+choice
+        prompt "SMDK6410 MMC/SD slot setup"
+        depends on MACH_SMDK6410
+
+config SMDK6410_SD_CH0
+        bool "Use channel 0 only"
+        depends on MACH_SMDK6410
+        help
+          Select CON7 (channel 0) as the MMC/SD slot, as
+          at least some SMDK6410 boards come with the
+          resistors fitted so that the card detects for
+          channels 0 and 1 are the same.
+       
+config SMDK6410_SD_CH1
+        bool "Use channel 1 only"
+        depends on MACH_SMDK6410
+        help
+          Select CON6 (channel 1) as the MMC/SD slot, as
+          at least some SMDK6410 boards come with the
+          resistors fitted so that the card detects for
+          channels 0 and 1 are the same.
+
+endchoice
diff --git a/arch/arm/mach-s3c6410/Makefile b/arch/arm/mach-s3c6410/Makefile
new file mode 100644
index 000000000000..2cd4f189036b
--- /dev/null
+++ b/arch/arm/mach-s3c6410/Makefile
@@ -0,0 +1,23 @@
+# arch/arm/plat-s3c6410/Makefile
+#
+# Copyright 2008 Openmoko, Inc.
+# Copyright 2008 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y                           :=
+obj-m                           :=
+obj-n                           :=
+obj-                            :=
+
+# Core support for S3C6410 system
+
+obj-$(CONFIG_CPU_S3C6410)       += cpu.o
+
+# Helper and device support
+
+obj-$(CONFIG_S3C6410_SETUP_SDHCI)       += setup-sdhci.o
+
+# machine support
+
+obj-$(CONFIG_MACH_SMDK6410)     += mach-smdk6410.o
diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c6410/cpu.c
new file mode 100644
index 000000000000..6a73ca6b7a3a
--- /dev/null
+++ b/arch/arm/mach-s3c6410/cpu.c
@@ -0,0 +1,101 @@
+/* linux/arch/arm/mach-s3c6410/cpu.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/regs-serial.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/sdhci.h>
+#include <plat/iic-core.h>
+#include <plat/s3c6400.h>
+#include <plat/s3c6410.h>
+
+/* Initial IO mappings */
+
+static struct map_desc s3c6410_iodesc[] __initdata = {
+};
+
+/* s3c6410_map_io
+ *
+ * register the standard cpu IO areas
+*/
+
+void __init s3c6410_map_io(void)
+{
+        iotable_init(s3c6410_iodesc, ARRAY_SIZE(s3c6410_iodesc));
+
+        /* initialise device information early */
+        s3c6410_default_sdhci0();
+        s3c6410_default_sdhci1();
+
+        /* the i2c devices are directly compatible with s3c2440 */
+        s3c_i2c0_setname("s3c2440-i2c");
+        s3c_i2c1_setname("s3c2440-i2c");
+}
+
+void __init s3c6410_init_clocks(int xtal)
+{
+        printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
+        s3c24xx_register_baseclocks(xtal);
+        s3c64xx_register_clocks();
+        s3c6400_register_clocks();
+        s3c6400_setup_clocks();
+}
+
+void __init s3c6410_init_irq(void)
+{
+        /* VIC0 is missing IRQ7, VIC1 is fully populated. */
+        s3c64xx_init_irq(~0 & ~(1 << 7), ~0);
+}
+
+struct sysdev_class s3c6410_sysclass = {
+        .name   = "s3c6410-core",
+};
+
+static struct sys_device s3c6410_sysdev = {
+        .cls    = &s3c6410_sysclass,
+};
+
+static int __init s3c6410_core_init(void)
+{
+        return sysdev_class_register(&s3c6410_sysclass);
+}
+
+core_initcall(s3c6410_core_init);
+
+int __init s3c6410_init(void)
+{
+        printk("S3C6410: Initialising architecture\n");
+
+        return sysdev_register(&s3c6410_sysdev);
+}
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
new file mode 100644
index 000000000000..3c4d47145c83
--- /dev/null
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -0,0 +1,185 @@
+/* linux/arch/arm/mach-s3c6410/mach-smdk6410.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include <video/platform_lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+
+#include <plat/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = {
+        [0] = {
+                .hwport      = 0,
+                .flags       = 0,
+                .ucon        = 0x3c5,
+                .ulcon       = 0x03,
+                .ufcon       = 0x51,
+        },
+        [1] = {
+                .hwport      = 1,
+                .flags       = 0,
+                .ucon        = 0x3c5,
+                .ulcon       = 0x03,
+                .ufcon       = 0x51,
+        },
+};
+
+/* framebuffer and LCD setup. */
+
+/* GPF15 = LCD backlight control
+ * GPF13 => Panel power
+ * GPN5 = LCD nRESET signal
+ * PWM_TOUT1 => backlight brightness
+ */
+
+static void smdk6410_lcd_power_set(struct plat_lcd_data *pd,
+                                   unsigned int power)
+{
+        if (power) {
+                gpio_direction_output(S3C64XX_GPF(13), 1);
+                gpio_direction_output(S3C64XX_GPF(15), 1);
+
+                /* fire nRESET on power up */
+                gpio_direction_output(S3C64XX_GPN(5), 0);
+                msleep(10);
+                gpio_direction_output(S3C64XX_GPN(5), 1);
+                msleep(1);
+        } else {
+                gpio_direction_output(S3C64XX_GPF(15), 0);
+                gpio_direction_output(S3C64XX_GPF(13), 0);
+        }
+}
+
+static struct plat_lcd_data smdk6410_lcd_power_data = {
+        .set_power      = smdk6410_lcd_power_set,
+};
+
+static struct platform_device smdk6410_lcd_powerdev = {
+        .name                   = "platform-lcd",
+        .dev.parent             = &s3c_device_fb.dev,
+        .dev.platform_data      = &smdk6410_lcd_power_data,
+};
+
+static struct s3c_fb_pd_win smdk6410_fb_win0 = {
+        /* this is to ensure we use win0 */
+        .win_mode       = {
+                .pixclock       = 41094,
+                .left_margin    = 8,
+                .right_margin   = 13,
+                .upper_margin   = 7,
+                .lower_margin   = 5,
+                .hsync_len      = 3,
+                .vsync_len      = 1,
+                .xres           = 800,
+                .yres           = 480,
+        },
+        .max_bpp        = 32,
+        .default_bpp    = 16,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
+        .setup_gpio     = s3c64xx_fb_gpio_setup_24bpp,
+        .win[0]         = &smdk6410_fb_win0,
+        .vidcon0        = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+        .vidcon1        = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+struct map_desc smdk6410_iodesc[] = {};
+
+static struct platform_device *smdk6410_devices[] __initdata = {
+#ifdef CONFIG_SMDK6410_SD_CH0
+        &s3c_device_hsmmc0,
+#endif
+#ifdef CONFIG_SMDK6410_SD_CH1
+        &s3c_device_hsmmc1,
+#endif
+        &s3c_device_i2c0,
+        &s3c_device_i2c1,
+        &s3c_device_fb,
+        &smdk6410_lcd_powerdev,
+};
+
+static struct i2c_board_info i2c_devs0[] __initdata = {
+        { I2C_BOARD_INFO("24c08", 0x50), },
+        { I2C_BOARD_INFO("WM8580", 0X1b), },
+};
+
+static struct i2c_board_info i2c_devs1[] __initdata = {
+        { I2C_BOARD_INFO("24c128", 0x57), },    /* Samsung S524AD0XD1 */
+};
+
+static void __init smdk6410_map_io(void)
+{
+        s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
+        s3c24xx_init_clocks(12000000);
+        s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
+}
+
+static void __init smdk6410_machine_init(void)
+{
+        s3c_i2c0_set_platdata(NULL);
+        s3c_i2c1_set_platdata(NULL);
+        s3c_fb_set_platdata(&smdk6410_lcd_pdata);
+
+        i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
+        i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
+
+        platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
+}
+
+MACHINE_START(SMDK6410, "SMDK6410")
+        /* Maintainer: Ben Dooks <ben@fluff.org> */
+        .phys_io        = S3C_PA_UART & 0xfff00000,
+        .io_pg_offst    = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+        .boot_params    = S3C64XX_PA_SDRAM + 0x100,
+
+        .init_irq       = s3c6410_init_irq,
+        .map_io         = smdk6410_map_io,
+        .init_machine   = smdk6410_machine_init,
+        .timer          = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c6410/setup-sdhci.c b/arch/arm/mach-s3c6410/setup-sdhci.c
new file mode 100644
index 000000000000..0b5788bd5985
--- /dev/null
+++ b/arch/arm/mach-s3c6410/setup-sdhci.c
@@ -0,0 +1,102 @@
+/* linux/arch/arm/mach-s3c6410/setup-sdhci.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <mach/gpio.h>
+#include <plat/gpio-cfg.h>
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s3c6410_hsmmc_clksrcs[4] = {
+        [0] = "hsmmc",
+        [1] = "hsmmc",
+        [2] = "mmc_bus",
+        /* [3] = "48m", - note not succesfully used yet */
+};
+
+void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+        unsigned int gpio;
+        unsigned int end;
+
+        end = S3C64XX_GPG(2 + width);
+
+        /* Set all the necessary GPG pins to special-function 0 */
+        for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) {
+                s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+                s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+        }
+
+        s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+        s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
+}
+
+void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
+                                    void __iomem *r,
+                                    struct mmc_ios *ios,
+                                    struct mmc_card *card)
+{
+        u32 ctrl2, ctrl3;
+
+        /* don't need to alter anything acording to card-type */
+
+        writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
+
+        ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
+        ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+        ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+                  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+                  S3C_SDHCI_CTRL2_ENFBCLKRX |
+                  S3C_SDHCI_CTRL2_DFCNT_NONE |
+                  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+        if (ios->clock < 25 * 1000000)
+                ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+                         S3C_SDHCI_CTRL3_FCSEL2 |
+                         S3C_SDHCI_CTRL3_FCSEL1 |
+                         S3C_SDHCI_CTRL3_FCSEL0);
+        else
+                ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+        printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
+        writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+        writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}
+
+void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+        unsigned int gpio;
+        unsigned int end;
+
+        end = S3C64XX_GPH(2 + width);
+
+        /* Set all the necessary GPG pins to special-function 0 */
+        for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) {
+                s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+                s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+        }
+
+        s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+        s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
+}
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index 31656c33e05e..def0bb457ca3 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -6,8 +6,8 @@
 
 config PLAT_S3C
         bool
-        depends on ARCH_S3C2410
-        default y if ARCH_S3C2410
+        depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX
+        default y
         select NO_IOPORT
         help
           Base platform code for any Samsung S3C device
@@ -16,24 +16,24 @@ config PLAT_S3C
 
 config CPU_LLSERIAL_S3C2410_ONLY
         bool
-        depends on ARCH_S3C2410
+        depends on PLAT_S3C
         default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
 
 config CPU_LLSERIAL_S3C2440_ONLY
         bool
-        depends on ARCH_S3C2410
+        depends on PLAT_S3C
         default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
 
 config CPU_LLSERIAL_S3C2410
         bool
-        depends on ARCH_S3C2410
+        depends on PLAT_S3C
         help
           Selected if there is an S3C2410 (or register compatible) serial
           low-level implementation needed
 
 config CPU_LLSERIAL_S3C2440
         bool
-        depends on ARCH_S3C2410
+        depends on PLAT_S3C
         help
           Selected if there is an S3C2440 (or register compatible) serial
           low-level implementation needed
@@ -57,6 +57,14 @@ config S3C_BOOT_ERROR_RESET
           Say y here to use the watchdog to reset the system if the
           kernel decompressor detects an error during decompression.
 
+config S3C_BOOT_UART_FORCE_FIFO
+       bool "Force UART FIFO on during boot process"
+       depends on PLAT_S3C
+       default y
+       help
+         Say Y here to force the UART FIFOs on during the kernel
+         uncompressor
+
 comment "Power management"
 
 config S3C2410_PM_DEBUG
@@ -102,3 +110,73 @@ config S3C_LOWLEVEL_UART_PORT
           such as the `Uncompressing...` at start time. The value of
           this configuration should be between zero and two. The port
           must have been initialised by the boot-loader before use.
+
+# options for gpiolib support
+
+config S3C_GPIO_SPACE
+        int "Space between gpio banks"
+        default 0
+        help
+          Add a number of spare GPIO entries between each bank for debugging
+          purposes. This allows any problems where an counter overflows from
+          one bank to another to be caught, at the expense of using a little
+          more memory.
+
+config S3C_GPIO_TRACK
+        bool
+        help
+          Internal configuration option to enable the s3c specific gpio
+          chip tracking if the platform requires it.
+
+config S3C_GPIO_PULL_UPDOWN
+        bool
+        help
+          Internal configuration to enable the correct GPIO pull helper
+
+config S3C_GPIO_PULL_DOWN
+        bool
+        help
+          Internal configuration to enable the correct GPIO pull helper
+
+config S3C_GPIO_PULL_UP
+        bool
+        help
+          Internal configuration to enable the correct GPIO pull helper
+
+config S3C_GPIO_CFG_S3C24XX
+        bool
+        help
+          Internal configuration to enable S3C24XX style GPIO configuration
+          functions.
+
+config S3C_GPIO_CFG_S3C64XX
+        bool
+        help
+          Internal configuration to enable S3C64XX style GPIO configuration
+          functions.
+
+# device definitions to compile in
+
+config S3C_DEV_HSMMC
+        bool
+        depends on PLAT_S3C
+        help
+          Compile in platform device definitions for HSMMC code
+
+config S3C_DEV_HSMMC1
+        bool
+        depends on PLAT_S3C
+        help
+          Compile in platform device definitions for HSMMC channel 1
+
+config S3C_DEV_I2C1
+        bool
+        depends on PLAT_S3C
+        help
+          Compile in platform device definitions for I2C channel 1
+
+config S3C_DEV_FB
+        bool
+        depends on PLAT_S3C
+        help
+          Compile in platform device definition for framebuffer
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index f03d7b35ba37..39195f972d5e 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -1,3 +1,27 @@
-# dummy makefile, currently just including asm/arm/plat-s3c/include/plat
+# arch/arm/plat-s3c/Makefile
+#
+# Copyright 2008 Simtec Electronics
+#
+# Licensed under GPLv2
 
-obj-n   := dummy.o
+obj-y                           :=
+obj-m                           :=
+obj-n                           :=
+obj-                            :=
+
+# Core support for all Samsung SoCs
+
+obj-y                           +=  init.o
+obj-y                           += time.o
+obj-y                           += clock.o
+obj-y                           += pwm-clock.o
+obj-y                           += gpio.o
+obj-y                           += gpio-config.o
+
+# devices
+
+obj-$(CONFIG_S3C_DEV_HSMMC)     += dev-hsmmc.o
+obj-$(CONFIG_S3C_DEV_HSMMC1)    += dev-hsmmc1.o
+obj-y                           += dev-i2c0.o
+obj-$(CONFIG_S3C_DEV_I2C1)      += dev-i2c1.o
+obj-$(CONFIG_S3C_DEV_FB)        += dev-fb.o
diff --git a/arch/arm/plat-s3c/clock.c b/arch/arm/plat-s3c/clock.c
new file mode 100644
index 000000000000..b6be76e2fe51
--- /dev/null
+++ b/arch/arm/plat-s3c/clock.c
@@ -0,0 +1,368 @@
+/* linux/arch/arm/plat-s3c24xx/clock.c
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX Core clock control support
+ *
+ * Based on, and code from linux/arch/arm/mach-versatile/clock.c
+ **
+ **  Copyright (C) 2004 ARM Limited.
+ **  Written by Deep Blue Solutions Limited.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+
+#include <plat/clock.h>
+#include <plat/cpu.h>
+
+/* clock information */
+
+static LIST_HEAD(clocks);
+
+/* We originally used an mutex here, but some contexts (see resume)
+ * are calling functions such as clk_set_parent() with IRQs disabled
+ * causing an BUG to be triggered.
+ */
+DEFINE_SPINLOCK(clocks_lock);
+
+/* enable and disable calls for use with the clk struct */
+
+static int clk_null_enable(struct clk *clk, int enable)
+{
+        return 0;
+}
+
+/* Clock API calls */
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+        struct clk *p;
+        struct clk *clk = ERR_PTR(-ENOENT);
+        int idno;
+
+        if (dev == NULL || dev->bus != &platform_bus_type)
+                idno = -1;
+        else
+                idno = to_platform_device(dev)->id;
+
+        spin_lock(&clocks_lock);
+
+        list_for_each_entry(p, &clocks, list) {
+                if (p->id == idno &&
+                    strcmp(id, p->name) == 0 &&
+                    try_module_get(p->owner)) {
+                        clk = p;
+                        break;
+                }
+        }
+
+        /* check for the case where a device was supplied, but the
+         * clock that was being searched for is not device specific */
+
+        if (IS_ERR(clk)) {
+                list_for_each_entry(p, &clocks, list) {
+                        if (p->id == -1 && strcmp(id, p->name) == 0 &&
+                            try_module_get(p->owner)) {
+                                clk = p;
+                                break;
+                        }
+                }
+        }
+
+        spin_unlock(&clocks_lock);
+        return clk;
+}
+
+void clk_put(struct clk *clk)
+{
+        module_put(clk->owner);
+}
+
+int clk_enable(struct clk *clk)
+{
+        if (IS_ERR(clk) || clk == NULL)
+                return -EINVAL;
+
+        clk_enable(clk->parent);
+
+        spin_lock(&clocks_lock);
+
+        if ((clk->usage++) == 0)
+                (clk->enable)(clk, 1);
+
+        spin_unlock(&clocks_lock);
+        return 0;
+}
+
+void clk_disable(struct clk *clk)
+{
+        if (IS_ERR(clk) || clk == NULL)
+                return;
+
+        spin_lock(&clocks_lock);
+
+        if ((--clk->usage) == 0)
+                (clk->enable)(clk, 0);
+
+        spin_unlock(&clocks_lock);
+        clk_disable(clk->parent);
+}
+
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+        if (IS_ERR(clk))
+                return 0;
+
+        if (clk->rate != 0)
+                return clk->rate;
+
+        if (clk->get_rate != NULL)
+                return (clk->get_rate)(clk);
+
+        if (clk->parent != NULL)
+                return clk_get_rate(clk->parent);
+
+        return clk->rate;
+}
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+        if (!IS_ERR(clk) && clk->round_rate)
+                return (clk->round_rate)(clk, rate);
+
+        return rate;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+        int ret;
+
+        if (IS_ERR(clk))
+                return -EINVAL;
+
+        /* We do not default just do a clk->rate = rate as
+         * the clock may have been made this way by choice.
+         */
+
+        WARN_ON(clk->set_rate == NULL);
+
+        if (clk->set_rate == NULL)
+                return -EINVAL;
+
+        spin_lock(&clocks_lock);
+        ret = (clk->set_rate)(clk, rate);
+        spin_unlock(&clocks_lock);
+
+        return ret;
+}
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+        return clk->parent;
+}
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+        int ret = 0;
+
+        if (IS_ERR(clk))
+                return -EINVAL;
+
+        spin_lock(&clocks_lock);
+
+        if (clk->set_parent)
+                ret = (clk->set_parent)(clk, parent);
+
+        spin_unlock(&clocks_lock);
+
+        return ret;
+}
+
+EXPORT_SYMBOL(clk_get);
+EXPORT_SYMBOL(clk_put);
+EXPORT_SYMBOL(clk_enable);
+EXPORT_SYMBOL(clk_disable);
+EXPORT_SYMBOL(clk_get_rate);
+EXPORT_SYMBOL(clk_round_rate);
+EXPORT_SYMBOL(clk_set_rate);
+EXPORT_SYMBOL(clk_get_parent);
+EXPORT_SYMBOL(clk_set_parent);
+
+/* base clocks */
+
+static int clk_default_setrate(struct clk *clk, unsigned long rate)
+{
+        clk->rate = rate;
+        return 0;
+}
+
+struct clk clk_xtal = {
+        .name           = "xtal",
+        .id             = -1,
+        .rate           = 0,
+        .parent         = NULL,
+        .ctrlbit        = 0,
+};
+
+struct clk clk_ext = {
+        .name           = "ext",
+        .id             = -1,
+};
+
+struct clk clk_epll = {
+        .name           = "epll",
+        .id             = -1,
+};
+
+struct clk clk_mpll = {
+        .name           = "mpll",
+        .id             = -1,
+        .set_rate       = clk_default_setrate,
+};
+
+struct clk clk_upll = {
+        .name           = "upll",
+        .id             = -1,
+        .parent         = NULL,
+        .ctrlbit        = 0,
+};
+
+struct clk clk_f = {
+        .name           = "fclk",
+        .id             = -1,
+        .rate           = 0,
+        .parent         = &clk_mpll,
+        .ctrlbit        = 0,
+        .set_rate       = clk_default_setrate,
+};
+
+struct clk clk_h = {
+        .name           = "hclk",
+        .id             = -1,
+        .rate           = 0,
+        .parent         = NULL,
+        .ctrlbit        = 0,
+        .set_rate       = clk_default_setrate,
+};
+
+struct clk clk_p = {
+        .name           = "pclk",
+        .id             = -1,
+        .rate           = 0,
+        .parent         = NULL,
+        .ctrlbit        = 0,
+        .set_rate       = clk_default_setrate,
+};
+
+struct clk clk_usb_bus = {
+        .name           = "usb-bus",
+        .id             = -1,
+        .rate           = 0,
+        .parent         = &clk_upll,
+};
+
+
+
+struct clk s3c24xx_uclk = {
+        .name           = "uclk",
+        .id             = -1,
+};
+
+/* initialise the clock system */
+
+int s3c24xx_register_clock(struct clk *clk)
+{
+        clk->owner = THIS_MODULE;
+
+        if (clk->enable == NULL)
+                clk->enable = clk_null_enable;
+
+        /* add to the list of available clocks */
+
+        /* Quick check to see if this clock has already been registered. */
+        BUG_ON(clk->list.prev != clk->list.next);
+
+        spin_lock(&clocks_lock);
+        list_add(&clk->list, &clocks);
+        spin_unlock(&clocks_lock);
+
+        return 0;
+}
+
+int s3c24xx_register_clocks(struct clk **clks, int nr_clks)
+{
+        int fails = 0;
+
+        for (; nr_clks > 0; nr_clks--, clks++) {
+                if (s3c24xx_register_clock(*clks) < 0)
+                        fails++;
+        }
+
+        return fails;
+}
+
+/* initalise all the clocks */
+
+int __init s3c24xx_register_baseclocks(unsigned long xtal)
+{
+        printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n");
+
+        clk_xtal.rate = xtal;
+
+        /* register our clocks */
+
+        if (s3c24xx_register_clock(&clk_xtal) < 0)
+                printk(KERN_ERR "failed to register master xtal\n");
+
+        if (s3c24xx_register_clock(&clk_mpll) < 0)
+                printk(KERN_ERR "failed to register mpll clock\n");
+
+        if (s3c24xx_register_clock(&clk_upll) < 0)
+                printk(KERN_ERR "failed to register upll clock\n");
+
+        if (s3c24xx_register_clock(&clk_f) < 0)
+                printk(KERN_ERR "failed to register cpu fclk\n");
+
+        if (s3c24xx_register_clock(&clk_h) < 0)
+                printk(KERN_ERR "failed to register cpu hclk\n");
+
+        if (s3c24xx_register_clock(&clk_p) < 0)
+                printk(KERN_ERR "failed to register cpu pclk\n");
+
+        return 0;
+}
+
diff --git a/arch/arm/plat-s3c/dev-fb.c b/arch/arm/plat-s3c/dev-fb.c
new file mode 100644
index 000000000000..0454b8ec02e2
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-fb.c
@@ -0,0 +1,72 @@
+/* linux/arch/arm/plat-s3c/dev-fb.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for framebuffer device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+
+#include <mach/map.h>
+#include <mach/regs-fb.h>
+
+#include <plat/fb.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_fb_resource[] = {
+        [0] = {
+                .start = S3C_PA_FB,
+                .end   = S3C_PA_FB + SZ_16K - 1,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start = IRQ_LCD_VSYNC,
+                .end   = IRQ_LCD_VSYNC,
+                .flags = IORESOURCE_IRQ,
+        },
+        [2] = {
+                .start = IRQ_LCD_FIFO,
+                .end   = IRQ_LCD_FIFO,
+                .flags = IORESOURCE_IRQ,
+        },
+        [3] = {
+                .start = IRQ_LCD_SYSTEM,
+                .end   = IRQ_LCD_SYSTEM,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device s3c_device_fb = {
+        .name             = "s3c-fb",
+        .id               = -1,
+        .num_resources    = ARRAY_SIZE(s3c_fb_resource),
+        .resource         = s3c_fb_resource,
+        .dev.dma_mask     = &s3c_device_fb.dev.coherent_dma_mask,
+        .dev.coherent_dma_mask = 0xffffffffUL,
+};
+
+void __init s3c_fb_set_platdata(struct s3c_fb_platdata *pd)
+{
+        struct s3c_fb_platdata *npd;
+
+        if (!pd) {
+                printk(KERN_ERR "%s: no platform data\n", __func__);
+                return;
+        }
+
+        npd = kmemdup(pd, sizeof(struct s3c_fb_platdata), GFP_KERNEL);
+        if (!npd)
+                printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+
+        s3c_device_fb.dev.platform_data = npd;
+}
diff --git a/arch/arm/plat-s3c/dev-hsmmc.c b/arch/arm/plat-s3c/dev-hsmmc.c
new file mode 100644
index 000000000000..4c05b39810e2
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-hsmmc.c
@@ -0,0 +1,68 @@
+/* linux/arch/arm/plat-s3c/dev-hsmmc.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for hsmmc devices
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+
+#include <mach/map.h>
+#include <plat/sdhci.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define S3C_SZ_HSMMC    (0x1000)
+
+static struct resource s3c_hsmmc_resource[] = {
+        [0] = {
+                .start = S3C_PA_HSMMC0,
+                .end   = S3C_PA_HSMMC0 + S3C_SZ_HSMMC - 1,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start = IRQ_HSMMC0,
+                .end   = IRQ_HSMMC0,
+                .flags = IORESOURCE_IRQ,
+        }
+};
+
+static u64 s3c_device_hsmmc_dmamask = 0xffffffffUL;
+
+struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata = {
+        .max_width      = 4,
+        .host_caps      = (MMC_CAP_4_BIT_DATA |
+                           MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+};
+
+struct platform_device s3c_device_hsmmc0 = {
+        .name           = "s3c-sdhci",
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(s3c_hsmmc_resource),
+        .resource       = s3c_hsmmc_resource,
+        .dev            = {
+                .dma_mask               = &s3c_device_hsmmc_dmamask,
+                .coherent_dma_mask      = 0xffffffffUL,
+                .platform_data          = &s3c_hsmmc0_def_platdata,
+        },
+};
+
+void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+        struct s3c_sdhci_platdata *set = &s3c_hsmmc0_def_platdata;
+
+        set->max_width = pd->max_width;
+
+        if (pd->cfg_gpio)
+                set->cfg_gpio = pd->cfg_gpio;
+        if (pd->cfg_card)
+                set->cfg_card = pd->cfg_card;
+}
diff --git a/arch/arm/plat-s3c/dev-hsmmc1.c b/arch/arm/plat-s3c/dev-hsmmc1.c
new file mode 100644
index 000000000000..e49bc4cd0ee6
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-hsmmc1.c
@@ -0,0 +1,68 @@
+/* linux/arch/arm/plat-s3c/dev-hsmmc1.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for hsmmc device 1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+
+#include <mach/map.h>
+#include <plat/sdhci.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define S3C_SZ_HSMMC    (0x1000)
+
+static struct resource s3c_hsmmc1_resource[] = {
+        [0] = {
+                .start = S3C_PA_HSMMC1,
+                .end   = S3C_PA_HSMMC1 + S3C_SZ_HSMMC - 1,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start = IRQ_HSMMC1,
+                .end   = IRQ_HSMMC1,
+                .flags = IORESOURCE_IRQ,
+        }
+};
+
+static u64 s3c_device_hsmmc1_dmamask = 0xffffffffUL;
+
+struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata = {
+        .max_width      = 4,
+        .host_caps      = (MMC_CAP_4_BIT_DATA |
+                           MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+};
+
+struct platform_device s3c_device_hsmmc1 = {
+        .name           = "s3c-sdhci",
+        .id             = 1,
+        .num_resources  = ARRAY_SIZE(s3c_hsmmc1_resource),
+        .resource       = s3c_hsmmc1_resource,
+        .dev            = {
+                .dma_mask               = &s3c_device_hsmmc1_dmamask,
+                .coherent_dma_mask      = 0xffffffffUL,
+                .platform_data          = &s3c_hsmmc1_def_platdata,
+        },
+};
+
+void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+        struct s3c_sdhci_platdata *set = &s3c_hsmmc1_def_platdata;
+
+        set->max_width = pd->max_width;
+
+        if (pd->cfg_gpio)
+                set->cfg_gpio = pd->cfg_gpio;
+        if (pd->cfg_card)
+                set->cfg_card = pd->cfg_card;
+}
diff --git a/arch/arm/plat-s3c/dev-i2c0.c b/arch/arm/plat-s3c/dev-i2c0.c
new file mode 100644
index 000000000000..2c0128c77c6e
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-i2c0.c
@@ -0,0 +1,71 @@
+/* linux/arch/arm/plat-s3c/dev-i2c0.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for i2c device 0
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/map.h>
+
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_i2c_resource[] = {
+        [0] = {
+                .start = S3C_PA_IIC,
+                .end   = S3C_PA_IIC + SZ_4K - 1,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start = IRQ_IIC,
+                .end   = IRQ_IIC,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device s3c_device_i2c0 = {
+        .name             = "s3c2410-i2c",
+#ifdef CONFIG_S3C_DEV_I2C1
+        .id               = 0,
+#else
+        .id               = -1,
+#endif
+        .num_resources    = ARRAY_SIZE(s3c_i2c_resource),
+        .resource         = s3c_i2c_resource,
+};
+
+static struct s3c2410_platform_i2c default_i2c_data0 __initdata = {
+        .flags          = 0,
+        .slave_addr     = 0x10,
+        .bus_freq       = 100*1000,
+        .max_freq       = 400*1000,
+        .sda_delay      = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON,
+};
+
+void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+        struct s3c2410_platform_i2c *npd;
+
+        if (!pd)
+                pd = &default_i2c_data0;
+
+        npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+        if (!npd)
+                printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+        else if (!npd->cfg_gpio)
+                npd->cfg_gpio = s3c_i2c0_cfg_gpio;
+
+        s3c_device_i2c0.dev.platform_data = npd;
+}
diff --git a/arch/arm/plat-s3c/dev-i2c1.c b/arch/arm/plat-s3c/dev-i2c1.c
new file mode 100644
index 000000000000..9658fb0aec95
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-i2c1.c
@@ -0,0 +1,68 @@
+/* linux/arch/arm/plat-s3c/dev-i2c1.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for i2c device 1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/map.h>
+
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_i2c_resource[] = {
+        [0] = {
+                .start = S3C_PA_IIC1,
+                .end   = S3C_PA_IIC1 + SZ_4K - 1,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start = IRQ_IIC1,
+                .end   = IRQ_IIC1,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device s3c_device_i2c1 = {
+        .name             = "s3c2410-i2c",
+        .id               = 1,
+        .num_resources    = ARRAY_SIZE(s3c_i2c_resource),
+        .resource         = s3c_i2c_resource,
+};
+
+static struct s3c2410_platform_i2c default_i2c_data1 __initdata = {
+        .flags          = 0,
+        .bus_num        = 1,
+        .slave_addr     = 0x10,
+        .bus_freq       = 100*1000,
+        .max_freq       = 400*1000,
+        .sda_delay      = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON,
+};
+
+void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+        struct s3c2410_platform_i2c *npd;
+
+        if (!pd)
+                pd = &default_i2c_data1;
+
+        npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+        if (!npd)
+                printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+        else if (!npd->cfg_gpio)
+                npd->cfg_gpio = s3c_i2c1_cfg_gpio;
+
+        s3c_device_i2c1.dev.platform_data = npd;
+}
diff --git a/arch/arm/plat-s3c/gpio-config.c b/arch/arm/plat-s3c/gpio-config.c
new file mode 100644
index 000000000000..7642b975a998
--- /dev/null
+++ b/arch/arm/plat-s3c/gpio-config.c
@@ -0,0 +1,163 @@
+/* linux/arch/arm/plat-s3c/gpio-config.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C series GPIO configuration core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <mach/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+int s3c_gpio_cfgpin(unsigned int pin, unsigned int config)
+{
+        struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+        unsigned long flags;
+        int offset;
+        int ret;
+
+        if (!chip)
+                return -EINVAL;
+
+        offset = pin - chip->chip.base;
+
+        local_irq_save(flags);
+        ret = s3c_gpio_do_setcfg(chip, offset, config);
+        local_irq_restore(flags);
+
+        return ret;
+}
+
+int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull)
+{
+        struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+        unsigned long flags;
+        int offset, ret;
+
+        if (!chip)
+                return -EINVAL;
+
+        offset = pin - chip->chip.base;
+
+        local_irq_save(flags);
+        ret = s3c_gpio_do_setpull(chip, offset, pull);
+        local_irq_restore(flags);
+
+        return ret;
+}
+
+#ifdef CONFIG_S3C_GPIO_CFG_S3C24XX
+int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip,
+                                  unsigned int off, unsigned int cfg)
+{
+        void __iomem *reg = chip->base;
+        unsigned int shift = off;
+        u32 con;
+
+        if (s3c_gpio_is_cfg_special(cfg)) {
+                cfg &= 0xf;
+
+                /* Map output to 0, and SFN2 to 1 */
+                cfg -= 1;
+                if (cfg > 1)
+                        return -EINVAL;
+
+                cfg <<= shift;
+        }
+
+        con = __raw_readl(reg);
+        con &= ~(0x1 << shift);
+        con |= cfg;
+        __raw_writel(con, reg);
+
+        return 0;
+}
+
+int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip,
+                            unsigned int off, unsigned int cfg)
+{
+        void __iomem *reg = chip->base;
+        unsigned int shift = off * 2;
+        u32 con;
+
+        if (s3c_gpio_is_cfg_special(cfg)) {
+                cfg &= 0xf;
+                if (cfg > 3)
+                        return -EINVAL;
+
+                cfg <<= shift;
+        }
+
+        con = __raw_readl(reg);
+        con &= ~(0x3 << shift);
+        con |= cfg;
+        __raw_writel(con, reg);
+
+        return 0;
+}
+#endif
+
+#ifdef CONFIG_S3C_GPIO_CFG_S3C64XX
+int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
+                                 unsigned int off, unsigned int cfg)
+{
+        void __iomem *reg = chip->base;
+        unsigned int shift = (off & 7) * 4;
+        u32 con;
+
+        if (off < 8 && chip->chip.ngpio >= 8)
+                reg -= 4;
+
+        if (s3c_gpio_is_cfg_special(cfg)) {
+                cfg &= 0xf;
+                cfg <<= shift;
+        }
+
+        con = __raw_readl(reg);
+        con &= ~(0xf << shift);
+        con |= cfg;
+        __raw_writel(con, reg);
+
+        return 0;
+}
+#endif /* CONFIG_S3C_GPIO_CFG_S3C64XX */
+
+#ifdef CONFIG_S3C_GPIO_PULL_UPDOWN
+int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip,
+                            unsigned int off, s3c_gpio_pull_t pull)
+{
+        void __iomem *reg = chip->base + 0x08;
+        int shift = off * 2;
+        u32 pup;
+
+        pup = __raw_readl(reg);
+        pup &= ~(3 << shift);
+        pup |= pull << shift;
+        __raw_writel(pup, reg);
+
+        return 0;
+}
+
+s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
+                                        unsigned int off)
+{
+        void __iomem *reg = chip->base + 0x08;
+        int shift = off * 2;
+        u32 pup = __raw_readl(reg);
+
+        pup >>= shift;
+        pup &= 0x3;
+        return (__force s3c_gpio_pull_t)pup;
+}
+#endif
diff --git a/arch/arm/plat-s3c/gpio.c b/arch/arm/plat-s3c/gpio.c
new file mode 100644
index 000000000000..d71dd6d9ce5c
--- /dev/null
+++ b/arch/arm/plat-s3c/gpio.c
@@ -0,0 +1,147 @@
+/* linux/arch/arm/plat-s3c/gpio.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C series GPIO core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <plat/gpio-core.h>
+
+#ifdef CONFIG_S3C_GPIO_TRACK
+struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
+
+static __init void s3c_gpiolib_track(struct s3c_gpio_chip *chip)
+{
+        unsigned int gpn;
+        int i;
+
+        gpn = chip->chip.base;
+        for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
+                BUG_ON(gpn > ARRAY_SIZE(s3c_gpios));
+                s3c_gpios[gpn] = chip;
+        }
+}
+#endif /* CONFIG_S3C_GPIO_TRACK */
+
+/* Default routines for controlling GPIO, based on the original S3C24XX
+ * GPIO functions which deal with the case where each gpio bank of the
+ * chip is as following:
+ *
+ * base + 0x00: Control register, 2 bits per gpio
+ *              gpio n: 2 bits starting at (2*n)
+ *              00 = input, 01 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ *              bit n: data bit n
+*/
+
+static int s3c_gpiolib_input(struct gpio_chip *chip, unsigned offset)
+{
+        struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+        void __iomem *base = ourchip->base;
+        unsigned long flags;
+        unsigned long con;
+
+        local_irq_save(flags);
+
+        con = __raw_readl(base + 0x00);
+        con &= ~(3 << (offset * 2));
+
+        __raw_writel(con, base + 0x00);
+
+        local_irq_restore(flags);
+        return 0;
+}
+
+static int s3c_gpiolib_output(struct gpio_chip *chip,
+                              unsigned offset, int value)
+{
+        struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+        void __iomem *base = ourchip->base;
+        unsigned long flags;
+        unsigned long dat;
+        unsigned long con;
+
+        local_irq_save(flags);
+
+        dat = __raw_readl(base + 0x04);
+        dat &= ~(1 << offset);
+        if (value)
+                dat |= 1 << offset;
+        __raw_writel(dat, base + 0x04);
+
+        con = __raw_readl(base + 0x00);
+        con &= ~(3 << (offset * 2));
+        con |= 1 << (offset * 2);
+
+        __raw_writel(con, base + 0x00);
+        __raw_writel(dat, base + 0x04);
+
+        local_irq_restore(flags);
+        return 0;
+}
+
+static void s3c_gpiolib_set(struct gpio_chip *chip,
+                            unsigned offset, int value)
+{
+        struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+        void __iomem *base = ourchip->base;
+        unsigned long flags;
+        unsigned long dat;
+
+        local_irq_save(flags);
+
+        dat = __raw_readl(base + 0x04);
+        dat &= ~(1 << offset);
+        if (value)
+                dat |= 1 << offset;
+        __raw_writel(dat, base + 0x04);
+
+        local_irq_restore(flags);
+}
+
+static int s3c_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+{
+        struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+        unsigned long val;
+
+        val = __raw_readl(ourchip->base + 0x04);
+        val >>= offset;
+        val &= 1;
+
+        return val;
+}
+
+__init void s3c_gpiolib_add(struct s3c_gpio_chip *chip)
+{
+        struct gpio_chip *gc = &chip->chip;
+        int ret;
+
+        BUG_ON(!chip->base);
+        BUG_ON(!gc->label);
+        BUG_ON(!gc->ngpio);
+
+        if (!gc->direction_input)
+                gc->direction_input = s3c_gpiolib_input;
+        if (!gc->direction_output)
+                gc->direction_output = s3c_gpiolib_output;
+        if (!gc->set)
+                gc->set = s3c_gpiolib_set;
+        if (!gc->get)
+                gc->get = s3c_gpiolib_get;
+
+        /* gpiochip_add() prints own failure message on error. */
+        ret = gpiochip_add(gc);
+        if (ret >= 0)
+                s3c_gpiolib_track(chip);
+}
diff --git a/arch/arm/plat-s3c/include/mach/io.h b/arch/arm/plat-s3c/include/mach/io.h
new file mode 100644
index 000000000000..10d28d66ace3
--- /dev/null
+++ b/arch/arm/plat-s3c/include/mach/io.h
@@ -0,0 +1,18 @@
+/* arch/arm/plat-s3c/include/mach/io.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben-linux@fluff.org>
+ *
+ * Default IO routines for plat-s3c based systems, such as S3C24A0
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+/* No current ISA/PCI bus support. */
+#define __io(a)         ((void __iomem *)(a))
+#define __mem_pci(a)    (a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif
diff --git a/arch/arm/mach-s3c2410/include/mach/timex.h b/arch/arm/plat-s3c/include/mach/timex.h
index 2a425ed0a7e0..2a425ed0a7e0 100644
--- a/arch/arm/mach-s3c2410/include/mach/timex.h
+++ b/arch/arm/plat-s3c/include/mach/timex.h
diff --git a/arch/arm/mach-s3c2410/include/mach/vmalloc.h b/arch/arm/plat-s3c/include/mach/vmalloc.h
index 315b0078a34d..bfd2ca6e3074 100644
--- a/arch/arm/mach-s3c2410/include/mach/vmalloc.h
+++ b/arch/arm/plat-s3c/include/mach/vmalloc.h
@@ -1,4 +1,4 @@
-/* arch/arm/mach-s3c2410/include/mach/vmalloc.h
+/* arch/arm/plat-s3c/include/mach/vmalloc.h
  *
  * from arch/arm/mach-iop3xx/include/mach/vmalloc.h
  *
diff --git a/arch/arm/plat-s3c/include/plat/adc.h b/arch/arm/plat-s3c/include/plat/adc.h
new file mode 100644
index 000000000000..43df2a404b0b
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/adc.h
@@ -0,0 +1,29 @@
+/* arch/arm/plat-s3c/include/plat/adc.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *      http://armlinux.simnte.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX ADC driver information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_ADC_H
+#define __ASM_PLAT_ADC_H __FILE__
+
+struct s3c_adc_client;
+
+extern int s3c_adc_start(struct s3c_adc_client *client,
+                         unsigned int channel, unsigned int nr_samples);
+
+extern struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
+                                               void (*select)(unsigned selected),
+                                               void (*conv)(unsigned d0, unsigned d1),
+                                               unsigned int is_ts);
+
+extern void s3c_adc_release(struct s3c_adc_client *client);
+
+#endif /* __ASM_PLAT_ADC_H */
diff --git a/arch/arm/plat-s3c24xx/include/plat/clock.h b/arch/arm/plat-s3c/include/plat/clock.h
index 235b753cd877..a10622eed43a 100644
--- a/arch/arm/plat-s3c24xx/include/plat/clock.h
+++ b/arch/arm/plat-s3c/include/plat/clock.h
@@ -1,5 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/clock.h
- * linux/arch/arm/mach-s3c2410/clock.h
+/* linux/arch/arm/plat-s3c/include/plat/clock.h
  *
  * Copyright (c) 2004-2005 Simtec Electronics
  *      http://www.simtec.co.uk/products/SWLINUX/
@@ -10,6 +9,8 @@
  * published by the Free Software Foundation.
 */
 
+#include <linux/spinlock.h>
+
 struct clk {
         struct list_head      list;
         struct module        *owner;
@@ -44,21 +45,44 @@ extern struct clk clk_h;
 extern struct clk clk_p;
 extern struct clk clk_mpll;
 extern struct clk clk_upll;
+extern struct clk clk_epll;
 extern struct clk clk_xtal;
+extern struct clk clk_ext;
+
+/* S3C64XX specific clocks */
+extern struct clk clk_27m;
+extern struct clk clk_48m;
 
 /* exports for arch/arm/mach-s3c2410
  *
  * Please DO NOT use these outside of arch/arm/mach-s3c2410
 */
 
-extern struct mutex clocks_mutex;
+extern spinlock_t clocks_lock;
 
 extern int s3c2410_clkcon_enable(struct clk *clk, int enable);
 
 extern int s3c24xx_register_clock(struct clk *clk);
 extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks);
 
-extern int s3c24xx_setup_clocks(unsigned long xtal,
-                                unsigned long fclk,
-                                unsigned long hclk,
-                                unsigned long pclk);
+extern int s3c24xx_register_baseclocks(unsigned long xtal);
+
+extern void s3c64xx_register_clocks(void);
+
+extern void s3c24xx_setup_clocks(unsigned long fclk,
+                                 unsigned long hclk,
+                                 unsigned long pclk);
+
+extern void s3c2410_setup_clocks(void);
+extern void s3c2412_setup_clocks(void);
+extern void s3c244x_setup_clocks(void);
+extern void s3c2443_setup_clocks(void);
+
+/* S3C64XX specific functions and clocks */
+
+extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable);
+
+/* Init for pwm clock code */
+
+extern void s3c_pwmclk_init(void);
+
diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-s3c/include/plat/cpu-freq.h
new file mode 100644
index 000000000000..c86a13307e90
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/cpu-freq.h
@@ -0,0 +1,94 @@
+/* arch/arm/plat-s3c/include/plat/cpu-freq.h
+ *
+ * Copyright (c) 2006,2007 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C CPU frequency scaling support - driver and board
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/cpufreq.h>
+
+struct s3c_cpufreq_info;
+struct s3c_cpufreq_board;
+struct s3c_iotimings;
+
+struct s3c_freq {
+        unsigned long   fclk;
+        unsigned long   armclk;
+        unsigned long   hclk_tns;       /* in 10ths of ns */
+        unsigned long   hclk;
+        unsigned long   pclk;
+};
+
+/* wrapper 'struct cpufreq_freqs' so that any drivers receiving the
+ * notification can use this information that is not provided by just
+ * having the core frequency alone.
+ */
+
+struct s3c_cpufreq_freqs {
+        struct cpufreq_freqs    freqs;
+        struct s3c_freq         old;
+        struct s3c_freq         new;
+};
+
+#define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs)
+
+struct s3c_clkdivs {
+        int             p_divisor;      /* fclk / pclk */
+        int             h_divisor;      /* fclk / hclk */
+        int             arm_divisor;    /* not all cpus have this. */
+        unsigned char   dvs;            /* using dvs mode to arm. */
+};
+
+#define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s))
+
+struct s3c_pllval {
+        unsigned long           freq;
+        unsigned long           pll_reg;
+};
+
+struct s3c_cpufreq_config {
+        struct s3c_freq         freq;
+        struct s3c_pllval       pll;
+        struct s3c_clkdivs      divs;
+        struct s3c_cpufreq_info *info;  /* for core, not drivers */
+        struct s3c_cpufreq_board *board;
+};
+
+/* s3c_cpufreq_board
+ *
+ * per-board configuraton information, such as memory refresh and
+ * how to initialise IO timings.
+ */
+struct s3c_cpufreq_board {
+        unsigned int    refresh;        /* refresh period in ns */
+        unsigned int    auto_io:1;      /* automatically init io timings. */
+        unsigned int    need_io:1;      /* set if needs io timing support. */
+
+        /* any non-zero field in here is taken as an upper limit. */
+        struct s3c_freq max;    /* frequency limits */
+};
+
+/* Things depending on frequency scaling. */
+#ifdef CONFIG_CPU_FREQ_S3C
+#define __init_or_cpufreq
+#else
+#define __init_or_cpufreq __init
+#endif
+
+/* Board functions */
+
+#ifdef CONFIG_CPU_FREQ_S3C
+extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board);
+#else
+
+static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
+{
+        return 0;
+}
+#endif  /* CONFIG_CPU_FREQ_S3C */
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h
index 23e420e8bd5b..e62ae0fcfe56 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu.h
+++ b/arch/arm/plat-s3c/include/plat/cpu.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/cpu.h
+/* linux/arch/arm/plat-s3c/include/plat/cpu.h
  *
  * Copyright (c) 2004-2005 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>
@@ -18,7 +18,7 @@
 #define MHZ (1000*1000)
 #endif
 
-#define print_mhz(m) ((m) / MHZ), ((m / 1000) % 1000)
+#define print_mhz(m) ((m) / MHZ), (((m) / 1000) % 1000)
 
 /* forward declaration */
 struct s3c24xx_uart_resources;
@@ -26,11 +26,28 @@ struct platform_device;
 struct s3c2410_uartcfg;
 struct map_desc;
 
+/* per-cpu initialisation function table. */
+
+struct cpu_table {
+        unsigned long   idcode;
+        unsigned long   idmask;
+        void            (*map_io)(void);
+        void            (*init_uarts)(struct s3c2410_uartcfg *cfg, int no);
+        void            (*init_clocks)(int xtal);
+        int             (*init)(void);
+        const char      *name;
+};
+
+extern void s3c_init_cpu(unsigned long idcode,
+                         struct cpu_table *cpus, unsigned int cputab_size);
+
 /* core initialisation functions */
 
 extern void s3c24xx_init_irq(void);
+extern void s3c64xx_init_irq(u32 vic0, u32 vic1);
 
 extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
+extern void s3c64xx_init_io(struct map_desc *mach_desc, int size);
 
 extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 
diff --git a/arch/arm/plat-s3c/include/plat/debug-macro.S b/arch/arm/plat-s3c/include/plat/debug-macro.S
index 4aa7e2e6c001..3634d4e3708b 100644
--- a/arch/arm/plat-s3c/include/plat/debug-macro.S
+++ b/arch/arm/plat-s3c/include/plat/debug-macro.S
@@ -20,7 +20,7 @@
         .endm
 
 #ifndef fifo_level
-#define fifo_level fifo_level_s3c2410
+#define fifo_level fifo_level_s3c2440
 #endif
 
         .macro  fifo_full_s3c2440 rd, rx
diff --git a/arch/arm/plat-s3c24xx/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index badaac9d64a8..6b1b5231511c 100644
--- a/arch/arm/plat-s3c24xx/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -17,21 +17,26 @@ struct s3c24xx_uart_resources {
 };
 
 extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
+extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];
 
 extern struct platform_device *s3c24xx_uart_devs[];
 extern struct platform_device *s3c24xx_uart_src[];
 
 extern struct platform_device s3c_device_timer[];
 
+extern struct platform_device s3c_device_fb;
 extern struct platform_device s3c_device_usb;
 extern struct platform_device s3c_device_lcd;
 extern struct platform_device s3c_device_wdt;
-extern struct platform_device s3c_device_i2c;
+extern struct platform_device s3c_device_i2c0;
+extern struct platform_device s3c_device_i2c1;
 extern struct platform_device s3c_device_iis;
 extern struct platform_device s3c_device_rtc;
 extern struct platform_device s3c_device_adc;
 extern struct platform_device s3c_device_sdi;
-extern struct platform_device s3c_device_hsmmc;
+extern struct platform_device s3c_device_hsmmc0;
+extern struct platform_device s3c_device_hsmmc1;
+extern struct platform_device s3c_device_hsmmc2;
 
 extern struct platform_device s3c_device_spi0;
 extern struct platform_device s3c_device_spi1;
diff --git a/arch/arm/plat-s3c/include/plat/fb.h b/arch/arm/plat-s3c/include/plat/fb.h
new file mode 100644
index 000000000000..214ff561b0dd
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/fb.h
@@ -0,0 +1,73 @@
+/* linux/arch/arm/plat-s3c/include/plat/fb.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - FB platform data definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_S3C_FB_H
+#define __PLAT_S3C_FB_H __FILE__
+
+/**
+ * struct s3c_fb_pd_win - per window setup data
+ * @win_mode: The display parameters to initialise (not for window 0)
+ * @virtual_x: The virtual X size.
+ * @virtual_y: The virtual Y size.
+ */
+struct s3c_fb_pd_win {
+        struct fb_videomode     win_mode;
+
+        unsigned short          default_bpp;
+        unsigned short          max_bpp;
+        unsigned short          virtual_x;
+        unsigned short          virtual_y;
+};
+
+/**
+ * struct s3c_fb_platdata -  S3C driver platform specific information
+ * @setup_gpio: Setup the external GPIO pins to the right state to transfer
+ *              the data from the display system to the connected display
+ *              device.
+ * @vidcon0: The base vidcon0 values to control the panel data format.
+ * @vidcon1: The base vidcon1 values to control the panel data output.
+ * @win: The setup data for each hardware window, or NULL for unused.
+ * @display_mode: The LCD output display mode.
+ *
+ * The platform data supplies the video driver with all the information
+ * it requires to work with the display(s) attached to the machine. It
+ * controls the initial mode, the number of display windows (0 is always
+ * the base framebuffer) that are initialised etc.
+ *
+ */
+struct s3c_fb_platdata {
+        void    (*setup_gpio)(void);
+
+        struct s3c_fb_pd_win    *win[S3C_FB_MAX_WIN];
+
+        u32                      vidcon0;
+        u32                      vidcon1;
+};
+
+/**
+ * s3c_fb_set_platdata() - Setup the FB device with platform data.
+ * @pd: The platform data to set. The data is copied from the passed structure
+ *      so the machine data can mark the data __initdata so that any unused
+ *      machines will end up dumping their data at runtime.
+ */
+extern void s3c_fb_set_platdata(struct s3c_fb_platdata *pd);
+
+/**
+ * s3c64xx_fb_gpio_setup_24bpp() - S3C64XX setup function for 24bpp LCD
+ *
+ * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
+ */
+extern void s3c64xx_fb_gpio_setup_24bpp(void);
+
+#endif /* __PLAT_S3C_FB_H */
diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h
new file mode 100644
index 000000000000..652e2bbdaa20
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h
@@ -0,0 +1,176 @@
+/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg-helper.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - GPIO pin configuration helper definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* This is meant for core cpu support, machine or other driver files
+ * should not be including this header.
+ */
+
+#ifndef __PLAT_GPIO_CFG_HELPERS_H
+#define __PLAT_GPIO_CFG_HELPERS_H __FILE__
+
+/* As a note, all gpio configuration functions are entered exclusively, either
+ * with the relevant lock held or the system prevented from doing anything else
+ * by disabling interrupts.
+*/
+
+static inline int s3c_gpio_do_setcfg(struct s3c_gpio_chip *chip,
+                                     unsigned int off, unsigned int config)
+{
+        return (chip->config->set_config)(chip, off, config);
+}
+
+static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip,
+                                      unsigned int off, s3c_gpio_pull_t pull)
+{
+        return (chip->config->set_pull)(chip, off, pull);
+}
+
+/**
+ * s3c_gpio_setcfg_s3c24xx - S3C24XX style GPIO configuration.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register
+ * has two bits of configuration per gpio, which have the following
+ * functions:
+ *      00 = input
+ *      01 = output
+ *      1x = special function
+*/
+extern int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip,
+                                   unsigned int off, unsigned int cfg);
+
+/**
+ * s3c_gpio_setcfg_s3c24xx_a - S3C24XX style GPIO configuration (Bank A)
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register
+ * has one bit of configuration for the gpio, where setting the bit
+ * means the pin is in special function mode and unset means output.
+*/
+extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
+                                     unsigned int off, unsigned int cfg);
+
+/**
+ * s3c_gpio_setcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register has 4 bits
+ * of control per GPIO, generally in the form of:
+ *      0000 = Input
+ *      0001 = Output
+ *      others = Special functions (dependant on bank)
+ *
+ * Note, since the code to deal with the case where there are two control
+ * registers instead of one, we do not have a seperate set of functions for
+ * each case.
+*/
+extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
+                                        unsigned int off, unsigned int cfg);
+
+
+/* Pull-{up,down} resistor controls.
+ *
+ * S3C2410,S3C2440,S3C24A0 = Pull-UP,
+ * S3C2412,S3C2413 = Pull-Down
+ * S3C6400,S3C6410 = Pull-Both [None,Down,Up,Undef]
+ * S3C2443 = Pull-Both [not same as S3C6400]
+ */
+
+/**
+ * s3c_gpio_setpull_1up() - Pull configuration for choice of up or none.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @param: pull: The pull mode being requested.
+ *
+ * This is a helper function for the case where we have GPIOs with one
+ * bit configuring the presence of a pull-up resistor.
+ */
+extern int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
+                                unsigned int off, s3c_gpio_pull_t pull);
+
+/**
+ * s3c_gpio_setpull_1down() - Pull configuration for choice of down or none
+ * @chip: The gpio chip that is being configured
+ * @off: The offset for the GPIO being configured
+ * @param: pull: The pull mode being requested
+ *
+ * This is a helper function for the case where we have GPIOs with one
+ * bit configuring the presence of a pull-down resistor.
+ */
+extern int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip,
+                                  unsigned int off, s3c_gpio_pull_t pull);
+
+/**
+ * s3c_gpio_setpull_upown() - Pull configuration for choice of up, down or none
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @param: pull: The pull mode being requested.
+ *
+ * This is a helper function for the case where we have GPIOs with two
+ * bits configuring the presence of a pull resistor, in the following
+ * order:
+ *      00 = No pull resistor connected
+ *      01 = Pull-up resistor connected
+ *      10 = Pull-down resistor connected
+ */
+extern int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip,
+                                   unsigned int off, s3c_gpio_pull_t pull);
+
+
+/**
+ * s3c_gpio_getpull_updown() - Get configuration for choice of up, down or none
+ * @chip: The gpio chip that the GPIO pin belongs to
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-{up,down} resistor for the
+ * given GPIO in the same case as s3c_gpio_setpull_upown.
+*/
+extern s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
+                                               unsigned int off);
+
+/**
+ * s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @param: pull: The pull mode being requested.
+ *
+ * This is a helper function for the case where we have GPIOs with two
+ * bits configuring the presence of a pull resistor, in the following
+ * order:
+ *      00 = Pull-up resistor connected
+ *      10 = Pull-down resistor connected
+ *      x1 = No pull up resistor
+ */
+extern int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip,
+                                    unsigned int off, s3c_gpio_pull_t pull);
+
+/**
+ * s3c_gpio_getpull_s3c2443() - Get configuration for s3c2443 pull resistors
+ * @chip: The gpio chip that the GPIO pin belongs to.
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-{up,down} resistor for the
+ * given GPIO in the same case as s3c_gpio_setpull_upown.
+*/
+extern s3c_gpio_pull_t s3c_gpio_getpull_s3c24xx(struct s3c_gpio_chip *chip,
+                                                unsigned int off);
+
+#endif /* __PLAT_GPIO_CFG_HELPERS_H */
+
diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg.h b/arch/arm/plat-s3c/include/plat/gpio-cfg.h
new file mode 100644
index 000000000000..29cd6a86cade
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/gpio-cfg.h
@@ -0,0 +1,110 @@
+/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - GPIO pin configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* This file contains the necessary definitions to get the basic gpio
+ * pin configuration done such as setting a pin to input or output or
+ * changing the pull-{up,down} configurations.
+ */
+
+/* Note, this interface is being added to the s3c64xx arch first and will
+ * be added to the s3c24xx systems later.
+ */
+
+#ifndef __PLAT_GPIO_CFG_H
+#define __PLAT_GPIO_CFG_H __FILE__
+
+typedef unsigned int __bitwise__ s3c_gpio_pull_t;
+
+/* forward declaration if gpio-core.h hasn't been included */
+struct s3c_gpio_chip;
+
+/**
+ * struct s3c_gpio_cfg GPIO configuration
+ * @cfg_eint: Configuration setting when used for external interrupt source
+ * @get_pull: Read the current pull configuration for the GPIO
+ * @set_pull: Set the current pull configuraiton for the GPIO
+ * @set_config: Set the current configuration for the GPIO
+ * @get_config: Read the current configuration for the GPIO
+ *
+ * Each chip can have more than one type of GPIO bank available and some
+ * have different capabilites even when they have the same control register
+ * layouts. Provide an point to vector control routine and provide any
+ * per-bank configuration information that other systems such as the
+ * external interrupt code will need.
+ */
+struct s3c_gpio_cfg {
+        unsigned int    cfg_eint;
+
+        s3c_gpio_pull_t (*get_pull)(struct s3c_gpio_chip *chip, unsigned offs);
+        int             (*set_pull)(struct s3c_gpio_chip *chip, unsigned offs,
+                                    s3c_gpio_pull_t pull);
+
+        unsigned (*get_config)(struct s3c_gpio_chip *chip, unsigned offs);
+        int      (*set_config)(struct s3c_gpio_chip *chip, unsigned offs,
+                               unsigned config);
+};
+
+#define S3C_GPIO_SPECIAL_MARK   (0xfffffff0)
+#define S3C_GPIO_SPECIAL(x)     (S3C_GPIO_SPECIAL_MARK | (x))
+
+/* Defines for generic pin configurations */
+#define S3C_GPIO_INPUT  (S3C_GPIO_SPECIAL(0))
+#define S3C_GPIO_OUTPUT (S3C_GPIO_SPECIAL(1))
+#define S3C_GPIO_SFN(x) (S3C_GPIO_SPECIAL(x))
+
+#define s3c_gpio_is_cfg_special(_cfg) \
+        (((_cfg) & S3C_GPIO_SPECIAL_MARK) == S3C_GPIO_SPECIAL_MARK)
+
+/**
+ * s3c_gpio_cfgpin() - Change the GPIO function of a pin.
+ * @pin pin The pin number to configure.
+ * @pin to The configuration for the pin's function.
+ *
+ * Configure which function is actually connected to the external
+ * pin, such as an gpio input, output or some form of special function
+ * connected to an internal peripheral block.
+ */
+extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to);
+
+/* Define values for the pull-{up,down} available for each gpio pin.
+ *
+ * These values control the state of the weak pull-{up,down} resistors
+ * available on most pins on the S3C series. Not all chips support both
+ * up or down settings, and it may be dependant on the chip that is being
+ * used to whether the particular mode is available.
+ */
+#define S3C_GPIO_PULL_NONE      ((__force s3c_gpio_pull_t)0x00)
+#define S3C_GPIO_PULL_DOWN      ((__force s3c_gpio_pull_t)0x01)
+#define S3C_GPIO_PULL_UP        ((__force s3c_gpio_pull_t)0x02)
+
+/**
+ * s3c_gpio_setpull() - set the state of a gpio pin pull resistor
+ * @pin: The pin number to configure the pull resistor.
+ * @pull: The configuration for the pull resistor.
+ *
+ * This function sets the state of the pull-{up,down} resistor for the
+ * specified pin. It will return 0 if successfull, or a negative error
+ * code if the pin cannot support the requested pull setting.
+*/
+extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);
+
+/**
+ * s3c_gpio_getpull() - get the pull resistor state of a gpio pin
+ * @pin: The pin number to get the settings for
+ *
+ * Read the pull resistor value for the specified pin.
+*/
+extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
+
+#endif /* __PLAT_GPIO_CFG_H */
diff --git a/arch/arm/plat-s3c/include/plat/gpio-core.h b/arch/arm/plat-s3c/include/plat/gpio-core.h
new file mode 100644
index 000000000000..2fc60a580ac8
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/gpio-core.h
@@ -0,0 +1,77 @@
+/* linux/arch/arm/plat-s3c/include/plat/gpio-core.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - GPIO core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Define the core gpiolib support functions that the s3c platforms may
+ * need to extend or change depending on the hardware and the s3c chip
+ * selected at build or found at run time.
+ *
+ * These definitions are not intended for driver inclusion, there is
+ * nothing here that should not live outside the platform and core
+ * specific code.
+*/
+
+struct s3c_gpio_cfg;
+
+/**
+ * struct s3c_gpio_chip - wrapper for specific implementation of gpio
+ * @chip: The chip structure to be exported via gpiolib.
+ * @base: The base pointer to the gpio configuration registers.
+ * @config: special function and pull-resistor control information.
+ *
+ * This wrapper provides the necessary information for the Samsung
+ * specific gpios being registered with gpiolib.
+ */
+struct s3c_gpio_chip {
+        struct gpio_chip        chip;
+        struct s3c_gpio_cfg     *config;
+        void __iomem            *base;
+};
+
+static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc)
+{
+        return container_of(gpc, struct s3c_gpio_chip, chip);
+}
+
+/** s3c_gpiolib_add() - add the s3c specific version of a gpio_chip.
+ * @chip: The chip to register
+ *
+ * This is a wrapper to gpiochip_add() that takes our specific gpio chip
+ * information and makes the necessary alterations for the platform and
+ * notes the information for use with the configuration systems and any
+ * other parts of the system.
+ */
+extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip);
+
+/* CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios
+ * for use with the configuration calls, and other parts of the s3c gpiolib
+ * support code.
+ *
+ * Not all s3c support code will need this, as some configurations of cpu
+ * may only support one or two different configuration options and have an
+ * easy gpio to s3c_gpio_chip mapping function. If this is the case, then
+ * the machine support file should provide its own s3c_gpiolib_getchip()
+ * and any other necessary functions.
+ */
+
+#ifdef CONFIG_S3C_GPIO_TRACK
+extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
+
+static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip)
+{
+        return (chip < S3C_GPIO_END) ? s3c_gpios[chip] : NULL;
+}
+#else
+/* machine specific code should provide s3c_gpiolib_getchip */
+
+static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { }
+#endif
diff --git a/arch/arm/plat-s3c/include/plat/iic-core.h b/arch/arm/plat-s3c/include/plat/iic-core.h
new file mode 100644
index 000000000000..36397ca20962
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/iic-core.h
@@ -0,0 +1,35 @@
+/* arch/arm/mach-s3c2410/include/mach/iic-core.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - I2C Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_IIC_CORE_H
+#define __ASM_ARCH_IIC_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_i2c0_setname(char *name)
+{
+        /* currently this device is always compiled in */
+        s3c_device_i2c0.name = name;
+}
+
+static inline void s3c_i2c1_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_I2C1
+        s3c_device_i2c1.name = name;
+#endif
+}
+
+#endif /* __ASM_ARCH_IIC_H */
diff --git a/arch/arm/plat-s3c/include/plat/iic.h b/arch/arm/plat-s3c/include/plat/iic.h
index 5106acaa1d0e..dc1dfcb9bc6c 100644
--- a/arch/arm/plat-s3c/include/plat/iic.h
+++ b/arch/arm/plat-s3c/include/plat/iic.h
@@ -28,6 +28,30 @@ struct s3c2410_platform_i2c {
         unsigned long   max_freq;       /* max frequency for the bus */
         unsigned long   min_freq;       /* min frequency for the bus */
         unsigned int    sda_delay;      /* pclks (s3c2440 only) */
+
+        void    (*cfg_gpio)(struct platform_device *dev);
 };
 
+/**
+ * s3c_i2c0_set_platdata - set platform data for i2c0 device
+ * @i2c: The platform data to set, or NULL for default data.
+ *
+ * Register the given platform data for use with the i2c0 device. This
+ * call copies the platform data, so the caller can use __initdata for
+ * their copy.
+ *
+ * This call will set cfg_gpio if is null to the default platform
+ * implementation.
+ *
+ * Any user of s3c_device_i2c0 should call this, even if it is with
+ * NULL to ensure that the device is given the default platform data
+ * as the driver will no longer carry defaults.
+ */
+extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c);
+
+/* defined by architecture to configure gpio */
+extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c1_cfg_gpio(struct platform_device *dev);
+
 #endif /* __ASM_ARCH_IIC_H */
diff --git a/arch/arm/plat-s3c/include/plat/map.h b/arch/arm/plat-s3c/include/plat/map-base.h
index b84289d32a54..b84289d32a54 100644
--- a/arch/arm/plat-s3c/include/plat/map.h
+++ b/arch/arm/plat-s3c/include/plat/map-base.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-fb.h b/arch/arm/plat-s3c/include/plat/regs-fb.h
new file mode 100644
index 000000000000..e9ee599d430e
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/regs-fb.h
@@ -0,0 +1,366 @@
+/* arch/arm/plat-s3c/include/plat/regs-fb.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - new-style framebuffer register definitions
+ *
+ * This is the register set for the new style framebuffer interface
+ * found from the S3C2443 onwards into the S3C2416, S3C2450 and the
+ * S3C64XX series such as the S3C6400 and S3C6410.
+ *
+ * The file does not contain the cpu specific items which are based on
+ * whichever architecture is selected, it only contains the core of the
+ * register set. See <mach/regs-fb.h> to get the specifics.
+ *
+ * Note, we changed to using regs-fb.h as it avoids any clashes with
+ * the original regs-lcd.h so out of the way of regs-lcd.h as well as
+ * indicating the newer block is much more than just an LCD interface.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Please do not include this file directly, use <mach/regs-fb.h> to
+ * ensure all the localised SoC support is included as necessary.
+*/
+
+/* VIDCON0 */
+
+#define VIDCON0                                 (0x00)
+#define VIDCON0_INTERLACE                       (1 << 29)
+#define VIDCON0_VIDOUT_MASK                     (0x3 << 26)
+#define VIDCON0_VIDOUT_SHIFT                    (26)
+#define VIDCON0_VIDOUT_RGB                      (0x0 << 26)
+#define VIDCON0_VIDOUT_TV                       (0x1 << 26)
+#define VIDCON0_VIDOUT_I80_LDI0                 (0x2 << 26)
+#define VIDCON0_VIDOUT_I80_LDI1                 (0x3 << 26)
+
+#define VIDCON0_L1_DATA_MASK                    (0x7 << 23)
+#define VIDCON0_L1_DATA_SHIFT                   (23)
+#define VIDCON0_L1_DATA_16BPP                   (0x0 << 23)
+#define VIDCON0_L1_DATA_18BPP16                 (0x1 << 23)
+#define VIDCON0_L1_DATA_18BPP9                  (0x2 << 23)
+#define VIDCON0_L1_DATA_24BPP                   (0x3 << 23)
+#define VIDCON0_L1_DATA_18BPP                   (0x4 << 23)
+#define VIDCON0_L1_DATA_16BPP8                  (0x5 << 23)
+
+#define VIDCON0_L0_DATA_MASK                    (0x7 << 20)
+#define VIDCON0_L0_DATA_SHIFT                   (20)
+#define VIDCON0_L0_DATA_16BPP                   (0x0 << 20)
+#define VIDCON0_L0_DATA_18BPP16                 (0x1 << 20)
+#define VIDCON0_L0_DATA_18BPP9                  (0x2 << 20)
+#define VIDCON0_L0_DATA_24BPP                   (0x3 << 20)
+#define VIDCON0_L0_DATA_18BPP                   (0x4 << 20)
+#define VIDCON0_L0_DATA_16BPP8                  (0x5 << 20)
+
+#define VIDCON0_PNRMODE_MASK                    (0x3 << 17)
+#define VIDCON0_PNRMODE_SHIFT                   (17)
+#define VIDCON0_PNRMODE_RGB                     (0x0 << 17)
+#define VIDCON0_PNRMODE_BGR                     (0x1 << 17)
+#define VIDCON0_PNRMODE_SERIAL_RGB              (0x2 << 17)
+#define VIDCON0_PNRMODE_SERIAL_BGR              (0x3 << 17)
+
+#define VIDCON0_CLKVALUP                        (1 << 16)
+#define VIDCON0_CLKVAL_F_MASK                   (0xff << 6)
+#define VIDCON0_CLKVAL_F_SHIFT                  (6)
+#define VIDCON0_CLKVAL_F_LIMIT                  (0xff)
+#define VIDCON0_CLKVAL_F(_x)                    ((_x) << 6)
+#define VIDCON0_VLCKFREE                        (1 << 5)
+#define VIDCON0_CLKDIR                          (1 << 4)
+
+#define VIDCON0_CLKSEL_MASK                     (0x3 << 2)
+#define VIDCON0_CLKSEL_SHIFT                    (2)
+#define VIDCON0_CLKSEL_HCLK                     (0x0 << 2)
+#define VIDCON0_CLKSEL_LCD                      (0x1 << 2)
+#define VIDCON0_CLKSEL_27M                      (0x3 << 2)
+
+#define VIDCON0_ENVID                           (1 << 1)
+#define VIDCON0_ENVID_F                         (1 << 0)
+
+#define VIDCON1                                 (0x04)
+#define VIDCON1_LINECNT_MASK                    (0x7ff << 16)
+#define VIDCON1_LINECNT_SHIFT                   (16)
+#define VIDCON1_LINECNT_GET(_v)                 (((_v) >> 16) & 0x7ff)
+#define VIDCON1_VSTATUS_MASK                    (0x3 << 13)
+#define VIDCON1_VSTATUS_SHIFT                   (13)
+#define VIDCON1_VSTATUS_VSYNC                   (0x0 << 13)
+#define VIDCON1_VSTATUS_BACKPORCH               (0x1 << 13)
+#define VIDCON1_VSTATUS_ACTIVE                  (0x2 << 13)
+#define VIDCON1_VSTATUS_FRONTPORCH              (0x0 << 13)
+
+#define VIDCON1_INV_VCLK                        (1 << 7)
+#define VIDCON1_INV_HSYNC                       (1 << 6)
+#define VIDCON1_INV_VSYNC                       (1 << 5)
+#define VIDCON1_INV_VDEN                        (1 << 4)
+
+/* VIDCON2 */
+
+#define VIDCON2                                 (0x08)
+#define VIDCON2_EN601                           (1 << 23)
+#define VIDCON2_TVFMTSEL_SW                     (1 << 14)
+
+#define VIDCON2_TVFMTSEL1_MASK                  (0x3 << 12)
+#define VIDCON2_TVFMTSEL1_SHIFT                 (12)
+#define VIDCON2_TVFMTSEL1_RGB                   (0x0 << 12)
+#define VIDCON2_TVFMTSEL1_YUV422                (0x1 << 12)
+#define VIDCON2_TVFMTSEL1_YUV444                (0x2 << 12)
+
+#define VIDCON2_ORGYCbCr                        (1 << 8)
+#define VIDCON2_YUVORDCrCb                      (1 << 7)
+
+/* VIDTCON0 */
+
+#define VIDTCON0_VBPDE_MASK                     (0xff << 24)
+#define VIDTCON0_VBPDE_SHIFT                    (24)
+#define VIDTCON0_VBPDE_LIMIT                    (0xff)
+#define VIDTCON0_VBPDE(_x)                      ((_x) << 24)
+
+#define VIDTCON0_VBPD_MASK                      (0xff << 16)
+#define VIDTCON0_VBPD_SHIFT                     (16)
+#define VIDTCON0_VBPD_LIMIT                     (0xff)
+#define VIDTCON0_VBPD(_x)                       ((_x) << 16)
+
+#define VIDTCON0_VFPD_MASK                      (0xff << 8)
+#define VIDTCON0_VFPD_SHIFT                     (8)
+#define VIDTCON0_VFPD_LIMIT                     (0xff)
+#define VIDTCON0_VFPD(_x)                       ((_x) << 8)
+
+#define VIDTCON0_VSPW_MASK                      (0xff << 0)
+#define VIDTCON0_VSPW_SHIFT                     (0)
+#define VIDTCON0_VSPW_LIMIT                     (0xff)
+#define VIDTCON0_VSPW(_x)                       ((_x) << 0)
+
+/* VIDTCON1 */
+
+#define VIDTCON1_VFPDE_MASK                     (0xff << 24)
+#define VIDTCON1_VFPDE_SHIFT                    (24)
+#define VIDTCON1_VFPDE_LIMIT                    (0xff)
+#define VIDTCON1_VFPDE(_x)                      ((_x) << 24)
+
+#define VIDTCON1_HBPD_MASK                      (0xff << 16)
+#define VIDTCON1_HBPD_SHIFT                     (16)
+#define VIDTCON1_HBPD_LIMIT                     (0xff)
+#define VIDTCON1_HBPD(_x)                       ((_x) << 16)
+
+#define VIDTCON1_HFPD_MASK                      (0xff << 8)
+#define VIDTCON1_HFPD_SHIFT                     (8)
+#define VIDTCON1_HFPD_LIMIT                     (0xff)
+#define VIDTCON1_HFPD(_x)                       ((_x) << 8)
+
+#define VIDTCON1_HSPW_MASK                      (0xff << 0)
+#define VIDTCON1_HSPW_SHIFT                     (0)
+#define VIDTCON1_HSPW_LIMIT                     (0xff)
+#define VIDTCON1_HSPW(_x)                       ((_x) << 0)
+
+#define VIDTCON2                                (0x18)
+#define VIDTCON2_LINEVAL_MASK                   (0x7ff << 11)
+#define VIDTCON2_LINEVAL_SHIFT                  (11)
+#define VIDTCON2_LINEVAL_LIMIT                  (0x7ff)
+#define VIDTCON2_LINEVAL(_x)                    ((_x) << 11)
+
+#define VIDTCON2_HOZVAL_MASK                    (0x7ff << 0)
+#define VIDTCON2_HOZVAL_SHIFT                   (0)
+#define VIDTCON2_HOZVAL_LIMIT                   (0x7ff)
+#define VIDTCON2_HOZVAL(_x)                     ((_x) << 0)
+
+/* WINCONx */
+
+
+#define WINCONx_BITSWP                          (1 << 18)
+#define WINCONx_BYTSWP                          (1 << 17)
+#define WINCONx_HAWSWP                          (1 << 16)
+#define WINCONx_BURSTLEN_MASK                   (0x3 << 9)
+#define WINCONx_BURSTLEN_SHIFT                  (9)
+#define WINCONx_BURSTLEN_16WORD                 (0x0 << 9)
+#define WINCONx_BURSTLEN_8WORD                  (0x1 << 9)
+#define WINCONx_BURSTLEN_4WORD                  (0x2 << 9)
+
+#define WINCONx_ENWIN                           (1 << 0)
+#define WINCON0_BPPMODE_MASK                    (0xf << 2)
+#define WINCON0_BPPMODE_SHIFT                   (2)
+#define WINCON0_BPPMODE_1BPP                    (0x0 << 2)
+#define WINCON0_BPPMODE_2BPP                    (0x1 << 2)
+#define WINCON0_BPPMODE_4BPP                    (0x2 << 2)
+#define WINCON0_BPPMODE_8BPP_PALETTE            (0x3 << 2)
+#define WINCON0_BPPMODE_16BPP_565               (0x5 << 2)
+#define WINCON0_BPPMODE_16BPP_1555              (0x7 << 2)
+#define WINCON0_BPPMODE_18BPP_666               (0x8 << 2)
+#define WINCON0_BPPMODE_24BPP_888               (0xb << 2)
+
+#define WINCON1_BLD_PIX                         (1 << 6)
+
+#define WINCON1_ALPHA_SEL                       (1 << 1)
+#define WINCON1_BPPMODE_MASK                    (0xf << 2)
+#define WINCON1_BPPMODE_SHIFT                   (2)
+#define WINCON1_BPPMODE_1BPP                    (0x0 << 2)
+#define WINCON1_BPPMODE_2BPP                    (0x1 << 2)
+#define WINCON1_BPPMODE_4BPP                    (0x2 << 2)
+#define WINCON1_BPPMODE_8BPP_PALETTE            (0x3 << 2)
+#define WINCON1_BPPMODE_8BPP_1232               (0x4 << 2)
+#define WINCON1_BPPMODE_16BPP_565               (0x5 << 2)
+#define WINCON1_BPPMODE_16BPP_A1555             (0x6 << 2)
+#define WINCON1_BPPMODE_16BPP_I1555             (0x7 << 2)
+#define WINCON1_BPPMODE_18BPP_666               (0x8 << 2)
+#define WINCON1_BPPMODE_18BPP_A1665             (0x9 << 2)
+#define WINCON1_BPPMODE_19BPP_A1666             (0xa << 2)
+#define WINCON1_BPPMODE_24BPP_888               (0xb << 2)
+#define WINCON1_BPPMODE_24BPP_A1887             (0xc << 2)
+#define WINCON1_BPPMODE_25BPP_A1888             (0xd << 2)
+#define WINCON1_BPPMODE_28BPP_A4888             (0xd << 2)
+
+
+#define VIDOSDxA_TOPLEFT_X_MASK                 (0x7ff << 11)
+#define VIDOSDxA_TOPLEFT_X_SHIFT                (11)
+#define VIDOSDxA_TOPLEFT_X_LIMIT                (0x7ff)
+#define VIDOSDxA_TOPLEFT_X(_x)                  ((_x) << 11)
+
+#define VIDOSDxA_TOPLEFT_Y_MASK                 (0x7ff << 0)
+#define VIDOSDxA_TOPLEFT_Y_SHIFT                (0)
+#define VIDOSDxA_TOPLEFT_Y_LIMIT                (0x7ff)
+#define VIDOSDxA_TOPLEFT_Y(_x)                  ((_x) << 0)
+
+#define VIDOSDxB_BOTRIGHT_X_MASK                (0x7ff << 11)
+#define VIDOSDxB_BOTRIGHT_X_SHIFT               (11)
+#define VIDOSDxB_BOTRIGHT_X_LIMIT               (0x7ff)
+#define VIDOSDxB_BOTRIGHT_X(_x)                 ((_x) << 11)
+
+#define VIDOSDxB_BOTRIGHT_Y_MASK                (0x7ff << 0)
+#define VIDOSDxB_BOTRIGHT_Y_SHIFT               (0)
+#define VIDOSDxB_BOTRIGHT_Y_LIMIT               (0x7ff)
+#define VIDOSDxB_BOTRIGHT_Y(_x)                 ((_x) << 0)
+
+/* For VIDOSD[1..4]C */
+#define VIDISD14C_ALPHA0_R(_x)                  ((_x) << 20)
+#define VIDISD14C_ALPHA0_G_MASK                 (0xf << 16)
+#define VIDISD14C_ALPHA0_G_SHIFT                (16)
+#define VIDISD14C_ALPHA0_G_LIMIT                (0xf)
+#define VIDISD14C_ALPHA0_G(_x)                  ((_x) << 16)
+#define VIDISD14C_ALPHA0_B_MASK                 (0xf << 12)
+#define VIDISD14C_ALPHA0_B_SHIFT                (12)
+#define VIDISD14C_ALPHA0_B_LIMIT                (0xf)
+#define VIDISD14C_ALPHA0_B(_x)                  ((_x) << 12)
+#define VIDISD14C_ALPHA1_R_MASK                 (0xf << 8)
+#define VIDISD14C_ALPHA1_R_SHIFT                (8)
+#define VIDISD14C_ALPHA1_R_LIMIT                (0xf)
+#define VIDISD14C_ALPHA1_R(_x)                  ((_x) << 8)
+#define VIDISD14C_ALPHA1_G_MASK                 (0xf << 4)
+#define VIDISD14C_ALPHA1_G_SHIFT                (4)
+#define VIDISD14C_ALPHA1_G_LIMIT                (0xf)
+#define VIDISD14C_ALPHA1_G(_x)                  ((_x) << 4)
+#define VIDISD14C_ALPHA1_B_MASK                 (0xf << 0)
+#define VIDISD14C_ALPHA1_B_SHIFT                (0)
+#define VIDISD14C_ALPHA1_B_LIMIT                (0xf)
+#define VIDISD14C_ALPHA1_B(_x)                  ((_x) << 0)
+
+/* Video buffer addresses */
+#define VIDW_BUF_START(_buff)                   (0xA0 + ((_buff) * 8))
+#define VIDW_BUF_START1(_buff)                  (0xA4 + ((_buff) * 8))
+#define VIDW_BUF_END(_buff)                     (0xD0 + ((_buff) * 8))
+#define VIDW_BUF_END1(_buff)                    (0xD4 + ((_buff) * 8))
+#define VIDW_BUF_SIZE(_buff)                    (0x100 + ((_buff) * 4))
+
+#define VIDW_BUF_SIZE_OFFSET_MASK               (0x1fff << 13)
+#define VIDW_BUF_SIZE_OFFSET_SHIFT              (13)
+#define VIDW_BUF_SIZE_OFFSET_LIMIT              (0x1fff)
+#define VIDW_BUF_SIZE_OFFSET(_x)                ((_x) << 13)
+
+#define VIDW_BUF_SIZE_PAGEWIDTH_MASK            (0x1fff << 0)
+#define VIDW_BUF_SIZE_PAGEWIDTH_SHIFT           (0)
+#define VIDW_BUF_SIZE_PAGEWIDTH_LIMIT           (0x1fff)
+#define VIDW_BUF_SIZE_PAGEWIDTH(_x)             ((_x) << 0)
+
+/* Interrupt controls and status */
+
+#define VIDINTCON0_FIFOINTERVAL_MASK            (0x3f << 20)
+#define VIDINTCON0_FIFOINTERVAL_SHIFT           (20)
+#define VIDINTCON0_FIFOINTERVAL_LIMIT           (0x3f)
+#define VIDINTCON0_FIFOINTERVAL(_x)             ((_x) << 20)
+
+#define VIDINTCON0_INT_SYSMAINCON               (1 << 19)
+#define VIDINTCON0_INT_SYSSUBCON                (1 << 18)
+#define VIDINTCON0_INT_I80IFDONE                (1 << 17)
+
+#define VIDINTCON0_FRAMESEL0_MASK               (0x3 << 15)
+#define VIDINTCON0_FRAMESEL0_SHIFT              (15)
+#define VIDINTCON0_FRAMESEL0_BACKPORCH          (0x0 << 15)
+#define VIDINTCON0_FRAMESEL0_VSYNC              (0x1 << 15)
+#define VIDINTCON0_FRAMESEL0_ACTIVE             (0x2 << 15)
+#define VIDINTCON0_FRAMESEL0_FRONTPORCH         (0x3 << 15)
+
+#define VIDINTCON0_FRAMESEL1                    (1 << 14)
+#define VIDINTCON0_FRAMESEL1_NONE               (0x0 << 14)
+#define VIDINTCON0_FRAMESEL1_BACKPORCH          (0x1 << 14)
+#define VIDINTCON0_FRAMESEL1_VSYNC              (0x2 << 14)
+#define VIDINTCON0_FRAMESEL1_FRONTPORCH         (0x3 << 14)
+
+#define VIDINTCON0_INT_FRAME                    (1 << 12)
+#define VIDINTCON0_FIFIOSEL_MASK                (0x7f << 5)
+#define VIDINTCON0_FIFIOSEL_SHIFT               (5)
+#define VIDINTCON0_FIFIOSEL_WINDOW0             (0x1 << 5)
+#define VIDINTCON0_FIFIOSEL_WINDOW1             (0x2 << 5)
+
+#define VIDINTCON0_FIFOLEVEL_MASK               (0x7 << 2)
+#define VIDINTCON0_FIFOLEVEL_SHIFT              (2)
+#define VIDINTCON0_FIFOLEVEL_TO25PC             (0x0 << 2)
+#define VIDINTCON0_FIFOLEVEL_TO50PC             (0x1 << 2)
+#define VIDINTCON0_FIFOLEVEL_TO75PC             (0x2 << 2)
+#define VIDINTCON0_FIFOLEVEL_EMPTY              (0x3 << 2)
+#define VIDINTCON0_FIFOLEVEL_FULL               (0x4 << 2)
+
+#define VIDINTCON0_INT_FIFO_MASK                (0x3 << 0)
+#define VIDINTCON0_INT_FIFO_SHIFT               (0)
+#define VIDINTCON0_INT_ENABLE                   (1 << 0)
+
+#define VIDINTCON1                              (0x134)
+#define VIDINTCON1_INT_I180                     (1 << 2)
+#define VIDINTCON1_INT_FRAME                    (1 << 1)
+#define VIDINTCON1_INT_FIFO                     (1 << 0)
+
+/* Window colour-key control registers */
+
+#define WxKEYCON0_KEYBL_EN                      (1 << 26)
+#define WxKEYCON0_KEYEN_F                       (1 << 25)
+#define WxKEYCON0_DIRCON                        (1 << 24)
+#define WxKEYCON0_COMPKEY_MASK                  (0xffffff << 0)
+#define WxKEYCON0_COMPKEY_SHIFT                 (0)
+#define WxKEYCON0_COMPKEY_LIMIT                 (0xffffff)
+#define WxKEYCON0_COMPKEY(_x)                   ((_x) << 0)
+#define WxKEYCON1_COLVAL_MASK                   (0xffffff << 0)
+#define WxKEYCON1_COLVAL_SHIFT                  (0)
+#define WxKEYCON1_COLVAL_LIMIT                  (0xffffff)
+#define WxKEYCON1_COLVAL(_x)                    ((_x) << 0)
+
+
+/* Window blanking (MAP) */
+
+#define WINxMAP_MAP                             (1 << 24)
+#define WINxMAP_MAP_COLOUR_MASK                 (0xffffff << 0)
+#define WINxMAP_MAP_COLOUR_SHIFT                (0)
+#define WINxMAP_MAP_COLOUR_LIMIT                (0xffffff)
+#define WINxMAP_MAP_COLOUR(_x)                  ((_x) << 0)
+
+#define WPALCON_PAL_UPDATE                      (1 << 9)
+#define WPALCON_W1PAL_MASK                      (0x7 << 3)
+#define WPALCON_W1PAL_SHIFT                     (3)
+#define WPALCON_W1PAL_25BPP_A888                (0x0 << 3)
+#define WPALCON_W1PAL_24BPP                     (0x1 << 3)
+#define WPALCON_W1PAL_19BPP_A666                (0x2 << 3)
+#define WPALCON_W1PAL_18BPP_A665                (0x3 << 3)
+#define WPALCON_W1PAL_18BPP                     (0x4 << 3)
+#define WPALCON_W1PAL_16BPP_A555                (0x5 << 3)
+#define WPALCON_W1PAL_16BPP_565                 (0x6 << 3)
+
+#define WPALCON_W0PAL_MASK                      (0x7 << 0)
+#define WPALCON_W0PAL_SHIFT                     (0)
+#define WPALCON_W0PAL_25BPP_A888                (0x0 << 0)
+#define WPALCON_W0PAL_24BPP                     (0x1 << 0)
+#define WPALCON_W0PAL_19BPP_A666                (0x2 << 0)
+#define WPALCON_W0PAL_18BPP_A665                (0x3 << 0)
+#define WPALCON_W0PAL_18BPP                     (0x4 << 0)
+#define WPALCON_W0PAL_16BPP_A555                (0x5 << 0)
+#define WPALCON_W0PAL_16BPP_565                 (0x6 << 0)
+
diff --git a/arch/arm/plat-s3c/include/plat/regs-irqtype.h b/arch/arm/plat-s3c/include/plat/regs-irqtype.h
new file mode 100644
index 000000000000..c63cd3fc5ad3
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/regs-irqtype.h
@@ -0,0 +1,21 @@
+/* arch/arm/plat-s3c/include/plat/regs-irqtype.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C - IRQ detection types.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* values for S3C2410_EXTINT0/1/2 and other cpus in the series, including
+ * the S3C64XX
+*/
+#define S3C2410_EXTINT_LOWLEV    (0x00)
+#define S3C2410_EXTINT_HILEV     (0x01)
+#define S3C2410_EXTINT_FALLEDGE  (0x02)
+#define S3C2410_EXTINT_RISEEDGE  (0x04)
+#define S3C2410_EXTINT_BOTHEDGE  (0x06)
diff --git a/arch/arm/plat-s3c/include/plat/regs-sdhci.h b/arch/arm/plat-s3c/include/plat/regs-sdhci.h
new file mode 100644
index 000000000000..e34049ad44cc
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/regs-sdhci.h
@@ -0,0 +1,87 @@
+/* linux/arch/arm/plat-s3c/include/plat/regs-sdhci.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - SDHCI (HSMMC) register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_S3C_SDHCI_REGS_H
+#define __PLAT_S3C_SDHCI_REGS_H __FILE__
+
+#define S3C_SDHCI_CONTROL2                      (0x80)
+#define S3C_SDHCI_CONTROL3                      (0x84)
+#define S3C64XX_SDHCI_CONTROL4                  (0x8C)
+
+#define S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR       (1 << 31)
+#define S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK         (1 << 30)
+#define S3C_SDHCI_CTRL2_CDINVRXD3               (1 << 29)
+#define S3C_SDHCI_CTRL2_SLCARDOUT               (1 << 28)
+
+#define S3C_SDHCI_CTRL2_FLTCLKSEL_MASK          (0xf << 24)
+#define S3C_SDHCI_CTRL2_FLTCLKSEL_SHIFT         (24)
+#define S3C_SDHCI_CTRL2_FLTCLKSEL(_x)           ((_x) << 24)
+
+#define S3C_SDHCI_CTRL2_LVLDAT_MASK             (0xff << 16)
+#define S3C_SDHCI_CTRL2_LVLDAT_SHIFT            (16)
+#define S3C_SDHCI_CTRL2_LVLDAT(_x)              ((_x) << 16)
+
+#define S3C_SDHCI_CTRL2_ENFBCLKTX               (1 << 15)
+#define S3C_SDHCI_CTRL2_ENFBCLKRX               (1 << 14)
+#define S3C_SDHCI_CTRL2_SDCDSEL                 (1 << 13)
+#define S3C_SDHCI_CTRL2_SDSIGPC                 (1 << 12)
+#define S3C_SDHCI_CTRL2_ENBUSYCHKTXSTART        (1 << 11)
+
+#define S3C_SDHCI_CTRL2_DFCNT_MASK              (0x3 << 9)
+#define S3C_SDHCI_CTRL2_DFCNT_SHIFT             (9)
+#define S3C_SDHCI_CTRL2_DFCNT_NONE              (0x0 << 9)
+#define S3C_SDHCI_CTRL2_DFCNT_4SDCLK            (0x1 << 9)
+#define S3C_SDHCI_CTRL2_DFCNT_16SDCLK           (0x2 << 9)
+#define S3C_SDHCI_CTRL2_DFCNT_64SDCLK           (0x3 << 9)
+
+#define S3C_SDHCI_CTRL2_ENCLKOUTHOLD            (1 << 8)
+#define S3C_SDHCI_CTRL2_RWAITMODE               (1 << 7)
+#define S3C_SDHCI_CTRL2_DISBUFRD                (1 << 6)
+#define S3C_SDHCI_CTRL2_SELBASECLK_MASK         (0x3 << 4)
+#define S3C_SDHCI_CTRL2_SELBASECLK_SHIFT        (4)
+#define S3C_SDHCI_CTRL2_PWRSYNC                 (1 << 3)
+#define S3C_SDHCI_CTRL2_ENCLKOUTMSKCON          (1 << 1)
+#define S3C_SDHCI_CTRL2_HWINITFIN               (1 << 0)
+
+#define S3C_SDHCI_CTRL3_FCSEL3                  (1 << 31)
+#define S3C_SDHCI_CTRL3_FCSEL2                  (1 << 23)
+#define S3C_SDHCI_CTRL3_FCSEL1                  (1 << 15)
+#define S3C_SDHCI_CTRL3_FCSEL0                  (1 << 7)
+
+#define S3C_SDHCI_CTRL3_FIA3_MASK               (0x7f << 24)
+#define S3C_SDHCI_CTRL3_FIA3_SHIFT              (24)
+#define S3C_SDHCI_CTRL3_FIA3(_x)                ((_x) << 24)
+
+#define S3C_SDHCI_CTRL3_FIA2_MASK               (0x7f << 16)
+#define S3C_SDHCI_CTRL3_FIA2_SHIFT              (16)
+#define S3C_SDHCI_CTRL3_FIA2(_x)                ((_x) << 16)
+
+#define S3C_SDHCI_CTRL3_FIA1_MASK               (0x7f << 8)
+#define S3C_SDHCI_CTRL3_FIA1_SHIFT              (8)
+#define S3C_SDHCI_CTRL3_FIA1(_x)                ((_x) << 8)
+
+#define S3C_SDHCI_CTRL3_FIA0_MASK               (0x7f << 0)
+#define S3C_SDHCI_CTRL3_FIA0_SHIFT              (0)
+#define S3C_SDHCI_CTRL3_FIA0(_x)                ((_x) << 0)
+
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_MASK       (0x3 << 16)
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_SHIFT      (16)
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_2mA        (0x0 << 16)
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_4mA        (0x1 << 16)
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_7mA        (0x2 << 16)
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_9mA        (0x3 << 16)
+
+#define S3C64XX_SDHCI_CONTROL4_BUSY             (1)
+
+#endif /* __PLAT_S3C_SDHCI_REGS_H */
diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-s3c/include/plat/regs-serial.h
index a0daa647b92c..487d7d2a7e1d 100644
--- a/arch/arm/plat-s3c/include/plat/regs-serial.h
+++ b/arch/arm/plat-s3c/include/plat/regs-serial.h
@@ -77,6 +77,12 @@
 #define S3C2440_UCON_FCLK         (3<<10)
 #define S3C2443_UCON_EPLL         (3<<10)
 
+#define S3C6400_UCON_CLKMASK    (3<<10)
+#define S3C6400_UCON_PCLK       (0<<10)
+#define S3C6400_UCON_PCLK2      (2<<10)
+#define S3C6400_UCON_UCLK0      (1<<10)
+#define S3C6400_UCON_UCLK1      (3<<10)
+
 #define S3C2440_UCON2_FCLK_EN     (1<<15)
 #define S3C2440_UCON0_DIVMASK     (15 << 12)
 #define S3C2440_UCON1_DIVMASK     (15 << 12)
@@ -149,6 +155,14 @@
 #define S3C2410_UFSTAT_RXMASK     (15<<0)
 #define S3C2410_UFSTAT_RXSHIFT    (0)
 
+/* UFSTAT S3C24A0 */
+#define S3C24A0_UFSTAT_TXFULL     (1 << 14)
+#define S3C24A0_UFSTAT_RXFULL     (1 << 6)
+#define S3C24A0_UFSTAT_TXMASK     (63 << 8)
+#define S3C24A0_UFSTAT_TXSHIFT    (8)
+#define S3C24A0_UFSTAT_RXMASK     (63)
+#define S3C24A0_UFSTAT_RXSHIFT    (0)
+
 /* UFSTAT S3C2443 same as S3C2440 */
 #define S3C2440_UFSTAT_TXFULL     (1<<14)
 #define S3C2440_UFSTAT_RXFULL     (1<<6)
@@ -224,7 +238,7 @@ struct s3c2410_uartcfg {
  * or platform_add_device() before the console_initcall()
 */
 
-extern struct platform_device *s3c24xx_uart_devs[3];
+extern struct platform_device *s3c24xx_uart_devs[4];
 
 #endif /* __ASSEMBLY__ */
 
diff --git a/arch/arm/plat-s3c/include/plat/regs-timer.h b/arch/arm/plat-s3c/include/plat/regs-timer.h
index cc0eedd53e38..d097d92f8cc7 100644
--- a/arch/arm/plat-s3c/include/plat/regs-timer.h
+++ b/arch/arm/plat-s3c/include/plat/regs-timer.h
@@ -10,7 +10,6 @@
  * S3C2410 Timer configuration
 */
 
-
 #ifndef __ASM_ARCH_REGS_TIMER_H
 #define __ASM_ARCH_REGS_TIMER_H
 
@@ -21,6 +20,8 @@
 #define S3C2410_TCFG1         S3C_TIMERREG(0x04)
 #define S3C2410_TCON          S3C_TIMERREG(0x08)
 
+#define S3C64XX_TINT_CSTAT    S3C_TIMERREG(0x44)
+
 #define S3C2410_TCFG_PRESCALER0_MASK (255<<0)
 #define S3C2410_TCFG_PRESCALER1_MASK (255<<8)
 #define S3C2410_TCFG_PRESCALER1_SHIFT (8)
@@ -72,6 +73,14 @@
 #define S3C2410_TCFG1_MUX_TCLK    (4<<0)
 #define S3C2410_TCFG1_MUX_MASK    (15<<0)
 
+#define S3C64XX_TCFG1_MUX_DIV1    (0<<0)
+#define S3C64XX_TCFG1_MUX_DIV2    (1<<0)
+#define S3C64XX_TCFG1_MUX_DIV4    (2<<0)
+#define S3C64XX_TCFG1_MUX_DIV8    (3<<0)
+#define S3C64XX_TCFG1_MUX_DIV16   (4<<0)
+#define S3C64XX_TCFG1_MUX_TCLK    (5<<0)  /* 3 sets of TCLK */
+#define S3C64XX_TCFG1_MUX_MASK    (15<<0)
+
 #define S3C2410_TCFG1_SHIFT(x)    ((x) * 4)
 
 /* for each timer, we have an count buffer, an compare buffer and
diff --git a/arch/arm/plat-s3c/include/plat/sdhci.h b/arch/arm/plat-s3c/include/plat/sdhci.h
new file mode 100644
index 000000000000..c4ca3920ca4b
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/sdhci.h
@@ -0,0 +1,108 @@
+/* linux/arch/arm/plat-s3c/include/plat/sdhci.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - SDHCI (HSMMC) platform data definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_S3C_SDHCI_H
+#define __PLAT_S3C_SDHCI_H __FILE__
+
+struct platform_device;
+struct mmc_host;
+struct mmc_card;
+struct mmc_ios;
+
+/**
+ * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
+ * @max_width: The maximum number of data bits supported.
+ * @host_caps: Standard MMC host capabilities bit field.
+ * @cfg_gpio: Configure the GPIO for a specific card bit-width
+ * @cfg_card: Configure the interface for a specific card and speed. This
+ *            is necessary the controllers and/or GPIO blocks require the
+ *            changing of driver-strength and other controls dependant on
+ *            the card and speed of operation.
+ *
+ * Initialisation data specific to either the machine or the platform
+ * for the device driver to use or call-back when configuring gpio or
+ * card speed information.
+*/
+struct s3c_sdhci_platdata {
+        unsigned int    max_width;
+        unsigned int    host_caps;
+
+        char            **clocks;       /* set of clock sources */
+
+        void    (*cfg_gpio)(struct platform_device *dev, int width);
+        void    (*cfg_card)(struct platform_device *dev,
+                            void __iomem *regbase,
+                            struct mmc_ios *ios,
+                            struct mmc_card *card);
+};
+
+/**
+ * s3c_sdhci0_set_platdata - Set platform data for S3C SDHCI device.
+ * @pd: Platform data to register to device.
+ *
+ * Register the given platform data for use withe S3C SDHCI device.
+ * The call will copy the platform data, so the board definitions can
+ * make the structure itself __initdata.
+ */
+extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd);
+extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd);
+
+/* Default platform data, exported so that per-cpu initialisation can
+ * set the correct one when there are more than one cpu type selected.
+*/
+
+extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata;
+extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
+
+/* Helper function availablity */
+
+#ifdef CONFIG_S3C6410_SETUP_SDHCI
+extern char *s3c6410_hsmmc_clksrcs[4];
+
+extern void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+
+extern void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
+                                           void __iomem *r,
+                                           struct mmc_ios *ios,
+                                           struct mmc_card *card);
+
+#ifdef CONFIG_S3C_DEV_HSMMC
+static inline void s3c6410_default_sdhci0(void)
+{
+        s3c_hsmmc0_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
+        s3c_hsmmc0_def_platdata.cfg_gpio = s3c6410_setup_sdhci0_cfg_gpio;
+        s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s3c6410_default_sdhci0(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC */
+
+#ifdef CONFIG_S3C_DEV_HSMMC1
+static inline void s3c6410_default_sdhci1(void)
+{
+        s3c_hsmmc1_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
+        s3c_hsmmc1_def_platdata.cfg_gpio = s3c6410_setup_sdhci1_cfg_gpio;
+        s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s3c6410_default_sdhci1(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+#else
+static inline void s3c6410_default_sdhci0(void) { }
+static inline void s3c6410_default_sdhci1(void) { }
+#endif /* CONFIG_S3C6410_SETUP_SDHCI */
+
+#endif /* __PLAT_S3C_SDHCI_H */
diff --git a/arch/arm/plat-s3c/include/plat/uncompress.h b/arch/arm/plat-s3c/include/plat/uncompress.h
index 8a8a927292e0..6061de87f225 100644
--- a/arch/arm/plat-s3c/include/plat/uncompress.h
+++ b/arch/arm/plat-s3c/include/plat/uncompress.h
@@ -37,7 +37,7 @@ static void arch_detect_cpu(void);
 /* how many bytes we allow into the FIFO at a time in FIFO mode */
 #define FIFO_MAX         (14)
 
-#define uart_base S3C24XX_PA_UART + (0x4000*CONFIG_S3C_LOWLEVEL_UART_PORT)
+#define uart_base S3C_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT)
 
 static __inline__ void
 uart_wr(unsigned int reg, unsigned int val)
@@ -139,6 +139,28 @@ static void arch_decomp_error(const char *x)
 
 static void error(char *err);
 
+#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO
+static inline void arch_enable_uart_fifo(void)
+{
+        u32 fifocon = uart_rd(S3C2410_UFCON);
+
+        if (!(fifocon & S3C2410_UFCON_FIFOMODE)) {
+                fifocon |= S3C2410_UFCON_RESETBOTH;
+                uart_wr(S3C2410_UFCON, fifocon);
+
+                /* wait for fifo reset to complete */
+                while (1) {
+                        fifocon = uart_rd(S3C2410_UFCON);
+                        if (!(fifocon & S3C2410_UFCON_RESETBOTH))
+                                break;
+                }
+        }
+}
+#else
+#define arch_enable_uart_fifo() do { } while(0)
+#endif
+
+
 static void
 arch_decomp_setup(void)
 {
@@ -149,6 +171,12 @@ arch_decomp_setup(void)
 
         arch_detect_cpu();
         arch_decomp_wdog_start();
+
+        /* Enable the UART FIFOs if they where not enabled and our
+         * configuration says we should turn them on.
+         */
+
+        arch_enable_uart_fifo();
 }
 
 
diff --git a/arch/arm/plat-s3c/init.c b/arch/arm/plat-s3c/init.c
new file mode 100644
index 000000000000..6790edfaca6f
--- /dev/null
+++ b/arch/arm/plat-s3c/init.c
@@ -0,0 +1,160 @@
+/* linux/arch/arm/plat-s3c/init.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C series CPU initialisation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+
+#include <plat/regs-serial.h>
+
+static struct cpu_table *cpu;
+
+static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode,
+                                                struct cpu_table *tab,
+                                                unsigned int count)
+{
+        for (; count != 0; count--, tab++) {
+                if ((idcode & tab->idmask) == tab->idcode)
+                        return tab;
+        }
+
+        return NULL;
+}
+
+void __init s3c_init_cpu(unsigned long idcode,
+                         struct cpu_table *cputab, unsigned int cputab_size)
+{
+        cpu = s3c_lookup_cpu(idcode, cputab, cputab_size);
+
+        if (cpu == NULL) {
+                printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode);
+                panic("Unknown S3C24XX CPU");
+        }
+
+        printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
+
+        if (cpu->map_io == NULL || cpu->init == NULL) {
+                printk(KERN_ERR "CPU %s support not enabled\n", cpu->name);
+                panic("Unsupported Samsung CPU");
+        }
+
+        cpu->map_io();
+}
+
+/* s3c24xx_init_clocks
+ *
+ * Initialise the clock subsystem and associated information from the
+ * given master crystal value.
+ *
+ * xtal  = 0 -> use default PLL crystal value (normally 12MHz)
+ *      != 0 -> PLL crystal value in Hz
+*/
+
+void __init s3c24xx_init_clocks(int xtal)
+{
+        if (xtal == 0)
+                xtal = 12*1000*1000;
+
+        if (cpu == NULL)
+                panic("s3c24xx_init_clocks: no cpu setup?\n");
+
+        if (cpu->init_clocks == NULL)
+                panic("s3c24xx_init_clocks: cpu has no clock init\n");
+        else
+                (cpu->init_clocks)(xtal);
+}
+
+/* uart management */
+
+static int nr_uarts __initdata = 0;
+
+static struct s3c2410_uartcfg uart_cfgs[CONFIG_SERIAL_SAMSUNG_UARTS];
+
+/* s3c24xx_init_uartdevs
+ *
+ * copy the specified platform data and configuration into our central
+ * set of devices, before the data is thrown away after the init process.
+ *
+ * This also fills in the array passed to the serial driver for the
+ * early initialisation of the console.
+*/
+
+void __init s3c24xx_init_uartdevs(char *name,
+                                  struct s3c24xx_uart_resources *res,
+                                  struct s3c2410_uartcfg *cfg, int no)
+{
+        struct platform_device *platdev;
+        struct s3c2410_uartcfg *cfgptr = uart_cfgs;
+        struct s3c24xx_uart_resources *resp;
+        int uart;
+
+        memcpy(cfgptr, cfg, sizeof(struct s3c2410_uartcfg) * no);
+
+        for (uart = 0; uart < no; uart++, cfg++, cfgptr++) {
+                platdev = s3c24xx_uart_src[cfgptr->hwport];
+
+                resp = res + cfgptr->hwport;
+
+                s3c24xx_uart_devs[uart] = platdev;
+
+                platdev->name = name;
+                platdev->resource = resp->resources;
+                platdev->num_resources = resp->nr_resources;
+
+                platdev->dev.platform_data = cfgptr;
+        }
+
+        nr_uarts = no;
+}
+
+void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+        if (cpu == NULL)
+                return;
+
+        if (cpu->init_uarts == NULL) {
+                printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n");
+        } else
+                (cpu->init_uarts)(cfg, no);
+}
+
+static int __init s3c_arch_init(void)
+{
+        int ret;
+
+        // do the correct init for cpu
+
+        if (cpu == NULL)
+                panic("s3c_arch_init: NULL cpu\n");
+
+        ret = (cpu->init)();
+        if (ret != 0)
+                return ret;
+
+        ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts);
+        return ret;
+}
+
+arch_initcall(s3c_arch_init);
diff --git a/arch/arm/plat-s3c24xx/pwm-clock.c b/arch/arm/plat-s3c/pwm-clock.c
index 3fad68a1e6bc..a318215ab535 100644
--- a/arch/arm/plat-s3c24xx/pwm-clock.c
+++ b/arch/arm/plat-s3c/pwm-clock.c
@@ -14,20 +14,20 @@
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/errno.h>
+#include <linux/log2.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <mach/map.h>
 #include <asm/irq.h>
 
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
 #include <plat/clock.h>
 #include <plat/cpu.h>
 
 #include <plat/regs-timer.h>
+#include <mach/pwm-clock.h>
 
 /* Each of the timers 0 through 5 go through the following
  * clock tree, with the inputs depending on the timers.
@@ -73,11 +73,13 @@
  * tclk -------------------------/
 */
 
-static unsigned long clk_pwm_scaler_getrate(struct clk *clk)
+static struct clk clk_timer_scaler[];
+
+static unsigned long clk_pwm_scaler_get_rate(struct clk *clk)
 {
         unsigned long tcfg0 = __raw_readl(S3C2410_TCFG0);
 
-        if (clk->id == 1) {
+        if (clk == &clk_timer_scaler[1]) {
                 tcfg0 &= S3C2410_TCFG_PRESCALER1_MASK;
                 tcfg0 >>= S3C2410_TCFG_PRESCALER1_SHIFT;
         } else {
@@ -87,18 +89,61 @@ static unsigned long clk_pwm_scaler_getrate(struct clk *clk)
         return clk_get_rate(clk->parent) / (tcfg0 + 1);
 }
 
-/* TODO - add set rate calls. */
+static unsigned long clk_pwm_scaler_round_rate(struct clk *clk,
+                                               unsigned long rate)
+{
+        unsigned long parent_rate = clk_get_rate(clk->parent);
+        unsigned long divisor = parent_rate / rate;
+
+        if (divisor > 256)
+                divisor = 256;
+        else if (divisor < 2)
+                divisor = 2;
+
+        return parent_rate / divisor;
+}
+
+static int clk_pwm_scaler_set_rate(struct clk *clk, unsigned long rate)
+{
+        unsigned long round = clk_pwm_scaler_round_rate(clk, rate);
+        unsigned long tcfg0;
+        unsigned long divisor;
+        unsigned long flags;
+
+        divisor = clk_get_rate(clk->parent) / round;
+        divisor--;
+
+        local_irq_save(flags);
+        tcfg0 = __raw_readl(S3C2410_TCFG0);
+
+        if (clk == &clk_timer_scaler[1]) {
+                tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
+                tcfg0 |= divisor << S3C2410_TCFG_PRESCALER1_SHIFT;
+        } else {
+                tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK;
+                tcfg0 |= divisor;
+        }
+
+        __raw_writel(tcfg0, S3C2410_TCFG0);
+        local_irq_restore(flags);
+
+        return 0;
+}
 
 static struct clk clk_timer_scaler[] = {
         [0]     = {
                 .name           = "pwm-scaler0",
                 .id             = -1,
-                .get_rate       = clk_pwm_scaler_getrate,
+                .get_rate       = clk_pwm_scaler_get_rate,
+                .set_rate       = clk_pwm_scaler_set_rate,
+                .round_rate     = clk_pwm_scaler_round_rate,
         },
         [1]     = {
                 .name           = "pwm-scaler1",
                 .id             = -1,
-                .get_rate       = clk_pwm_scaler_getrate,
+                .get_rate       = clk_pwm_scaler_get_rate,
+                .set_rate       = clk_pwm_scaler_set_rate,
+                .round_rate     = clk_pwm_scaler_round_rate,
         },
 };
 
@@ -123,11 +168,6 @@ static inline struct pwm_tdiv_clk *to_tdiv(struct clk *clk)
         return container_of(clk, struct pwm_tdiv_clk, clk);
 }
 
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
-        return 1 << (1 + tcfg1);
-}
-
 static unsigned long clk_pwm_tdiv_get_rate(struct clk *clk)
 {
         unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
@@ -136,7 +176,7 @@ static unsigned long clk_pwm_tdiv_get_rate(struct clk *clk)
         tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
         tcfg1 &= S3C2410_TCFG1_MUX_MASK;
 
-        if (tcfg1 == S3C2410_TCFG1_MUX_TCLK)
+        if (pwm_cfg_src_is_tclk(tcfg1))
                 divisor = to_tdiv(clk)->divisor;
         else
                 divisor = tcfg_to_divisor(tcfg1);
@@ -153,7 +193,9 @@ static unsigned long clk_pwm_tdiv_round_rate(struct clk *clk,
         parent_rate = clk_get_rate(clk->parent);
         divisor = parent_rate / rate;
 
-        if (divisor <= 2)
+        if (divisor <= 1 && pwm_tdiv_has_div1())
+                divisor = 1;
+        else if (divisor <= 2)
                 divisor = 2;
         else if (divisor <= 4)
                 divisor = 4;
@@ -167,25 +209,7 @@ static unsigned long clk_pwm_tdiv_round_rate(struct clk *clk,
 
 static unsigned long clk_pwm_tdiv_bits(struct pwm_tdiv_clk *divclk)
 {
-        unsigned long bits;
-
-        switch (divclk->divisor) {
-        case 2:
-                bits = S3C2410_TCFG1_MUX_DIV2;
-                break;
-        case 4:
-                bits = S3C2410_TCFG1_MUX_DIV4;
-                break;
-        case 8:
-                bits = S3C2410_TCFG1_MUX_DIV8;
-                break;
-        case 16:
-        default:
-                bits = S3C2410_TCFG1_MUX_DIV16;
-                break;
-        }
-
-        return bits;
+        return pwm_tdiv_div_bits(divclk->divisor);
 }
 
 static void clk_pwm_tdiv_update(struct pwm_tdiv_clk *divclk)
@@ -226,7 +250,7 @@ static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate)
         /* Update the current MUX settings if we are currently
          * selected as the clock source for this clock. */
 
-        if (tcfg1 != S3C2410_TCFG1_MUX_TCLK)
+        if (!pwm_cfg_src_is_tclk(tcfg1))
                 clk_pwm_tdiv_update(divclk);
 
         return 0;
@@ -313,7 +337,7 @@ static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent)
         unsigned long shift = S3C2410_TCFG1_SHIFT(id);
 
         if (parent == s3c24xx_pwmclk_tclk(id))
-                bits = S3C2410_TCFG1_MUX_TCLK << shift;
+                bits = S3C_TCFG1_MUX_TCLK << shift;
         else if (parent == s3c24xx_pwmclk_tdiv(id))
                 bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift;
         else
@@ -375,7 +399,7 @@ static __init int clk_pwm_tin_register(struct clk *pwm)
         tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
         tcfg1 &= S3C2410_TCFG1_MUX_MASK;
 
-        if (tcfg1 == S3C2410_TCFG1_MUX_TCLK)
+        if (pwm_cfg_src_is_tclk(tcfg1))
                 parent = s3c24xx_pwmclk_tclk(id);
         else
                 parent = s3c24xx_pwmclk_tdiv(id);
@@ -383,7 +407,16 @@ static __init int clk_pwm_tin_register(struct clk *pwm)
         return clk_set_parent(pwm, parent);
 }
 
-static __init int s3c24xx_pwmclk_init(void)
+/**
+ * s3c_pwmclk_init() - initialise pwm clocks
+ *
+ * Initialise and register the clocks which provide the inputs for the
+ * pwm timer blocks.
+ *
+ * Note, this call is required by the time core, so must be called after
+ * the base clocks are added and before any of the initcalls are run.
+ */
+__init void s3c_pwmclk_init(void)
 {
         struct clk *clk_timers;
         unsigned int clk;
@@ -392,7 +425,7 @@ static __init int s3c24xx_pwmclk_init(void)
         clk_timers = clk_get(NULL, "timers");
         if (IS_ERR(clk_timers)) {
                 printk(KERN_ERR "%s: no parent clock\n", __func__);
-                return -EINVAL;
+                return;
         }
 
         for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++) {
@@ -400,7 +433,7 @@ static __init int s3c24xx_pwmclk_init(void)
                 ret = s3c24xx_register_clock(&clk_timer_scaler[clk]);
                 if (ret < 0) {
                         printk(KERN_ERR "error adding pwm scaler%d clock\n", clk);
-                        goto err;
+                        return;
                 }
         }
 
@@ -408,7 +441,7 @@ static __init int s3c24xx_pwmclk_init(void)
                 ret = s3c24xx_register_clock(&clk_timer_tclk[clk]);
                 if (ret < 0) {
                         printk(KERN_ERR "error adding pww tclk%d\n", clk);
-                        goto err;
+                        return;
                 }
         }
 
@@ -416,7 +449,7 @@ static __init int s3c24xx_pwmclk_init(void)
                 ret = clk_pwm_tdiv_register(clk);
                 if (ret < 0) {
                         printk(KERN_ERR "error adding pwm%d tdiv clock\n", clk);
-                        goto err;
+                        return;
                 }
         }
 
@@ -424,14 +457,7 @@ static __init int s3c24xx_pwmclk_init(void)
                 ret = clk_pwm_tin_register(&clk_tin[clk]);
                 if (ret < 0) {
                         printk(KERN_ERR "error adding pwm%d tin clock\n", clk);
-                        goto err;
+                        return;
                 }
         }
-
-        return 0;
-
- err:
-        return ret;
 }
-
-arch_initcall(s3c24xx_pwmclk_init);
diff --git a/arch/arm/plat-s3c24xx/time.c b/arch/arm/plat-s3c/time.c
index c51916236ac0..3b27b29da478 100644
--- a/arch/arm/plat-s3c24xx/time.c
+++ b/arch/arm/plat-s3c/time.c
@@ -26,6 +26,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/platform_device.h>
 
 #include <asm/system.h>
 #include <asm/leds.h>
@@ -36,6 +37,7 @@
 #include <plat/regs-timer.h>
 #include <mach/regs-irq.h>
 #include <asm/mach/time.h>
+#include <mach/tick.h>
 
 #include <plat/clock.h>
 #include <plat/cpu.h>
@@ -43,6 +45,10 @@
 static unsigned long timer_startval;
 static unsigned long timer_usec_ticks;
 
+#ifndef TICK_MAX
+#define TICK_MAX (0xffff)
+#endif
+
 #define TIMER_USEC_SHIFT 16
 
 /* we use the shifted arithmetic to work out the ratio of timer ticks
@@ -91,23 +97,19 @@ static inline unsigned long timer_ticks_to_usec(unsigned long ticks)
  * IRQs are disabled before entering here from do_gettimeofday()
  */
 
-#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0))
-
 static unsigned long s3c2410_gettimeoffset (void)
 {
         unsigned long tdone;
-        unsigned long irqpend;
         unsigned long tval;
 
         /* work out how many ticks have gone since last timer interrupt */
 
-        tval =  __raw_readl(S3C2410_TCNTO(4));
+        tval =  __raw_readl(S3C2410_TCNTO(4));
         tdone = timer_startval - tval;
 
         /* check to see if there is an interrupt pending */
 
-        irqpend = __raw_readl(S3C2410_SRCPND);
-        if (irqpend & SRCPND_TIMER4) {
+        if (s3c24xx_ostimer_pending()) {
                 /* re-read the timer, and try and fix up for the missed
                  * interrupt. Note, the interrupt may go off before the
                  * timer has re-loaded from wrapping.
@@ -144,7 +146,11 @@ static struct irqaction s3c2410_timer_irq = {
         machine_is_bast()       || \
         machine_is_vr1000()     || \
         machine_is_anubis()     || \
-        machine_is_osiris() )
+        machine_is_osiris())
+
+static struct clk *tin;
+static struct clk *tdiv;
+static struct clk *timerclk;
 
 /*
  * Set up timer interrupt, and return the current time in seconds.
@@ -159,13 +165,7 @@ static void s3c2410_timer_setup (void)
         unsigned long tcfg1;
         unsigned long tcfg0;
 
-        tcnt = 0xffff;  /* default value for tcnt */
-
-        /* read the current timer configuration bits */
-
-        tcon = __raw_readl(S3C2410_TCON);
-        tcfg1 = __raw_readl(S3C2410_TCFG1);
-        tcfg0 = __raw_readl(S3C2410_TCFG0);
+        tcnt = TICK_MAX;  /* default value for tcnt */
 
         /* configure the system for whichever machine is in use */
 
@@ -174,11 +174,13 @@ static void s3c2410_timer_setup (void)
                 timer_usec_ticks = timer_mask_usec_ticks(1, 12000000);
                 tcnt = 12000000 / HZ;
 
+                tcfg1 = __raw_readl(S3C2410_TCFG1);
                 tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK;
                 tcfg1 |= S3C2410_TCFG1_MUX4_TCLK1;
+                __raw_writel(tcfg1, S3C2410_TCFG1);
         } else {
                 unsigned long pclk;
-                struct clk *clk;
+                struct clk *tscaler;
 
                 /* for the h1940 (and others), we use the pclk from the core
                  * to generate the timer values. since values around 50 to
@@ -189,38 +191,34 @@ static void s3c2410_timer_setup (void)
                  * (8.45 ticks per usec)
                  */
 
-                /* this is used as default if no other timer can be found */
-
-                clk = clk_get(NULL, "timers");
-                if (IS_ERR(clk))
-                        panic("failed to get clock for system timer");
-
-                clk_enable(clk);
-
-                pclk = clk_get_rate(clk);
+                pclk = clk_get_rate(timerclk);
 
                 /* configure clock tick */
 
                 timer_usec_ticks = timer_mask_usec_ticks(6, pclk);
 
-                tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK;
-                tcfg1 |= S3C2410_TCFG1_MUX4_DIV2;
+                tscaler = clk_get_parent(tdiv);
 
-                tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
-                tcfg0 |= ((6 - 1) / 2) << S3C2410_TCFG_PRESCALER1_SHIFT;
+                clk_set_rate(tscaler, pclk / 3);
+                clk_set_rate(tdiv, pclk / 6);
+                clk_set_parent(tin, tdiv);
 
-                tcnt = (pclk / 6) / HZ;
+                tcnt = clk_get_rate(tin) / HZ;
         }
 
+        tcon = __raw_readl(S3C2410_TCON);
+        tcfg0 = __raw_readl(S3C2410_TCFG0);
+        tcfg1 = __raw_readl(S3C2410_TCFG1);
+
         /* timers reload after counting zero, so reduce the count by 1 */
 
         tcnt--;
 
-        printk("timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n",
+        printk(KERN_DEBUG "timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n",
                tcon, tcnt, tcfg0, tcfg1, timer_usec_ticks);
 
         /* check to see if timer is within 16bit range... */
-        if (tcnt > 0xffff) {
+        if (tcnt > TICK_MAX) {
                 panic("setup_timer: HZ is too small, cannot configure timer!");
                 return;
         }
@@ -247,8 +245,35 @@ static void s3c2410_timer_setup (void)
         __raw_writel(tcon, S3C2410_TCON);
 }
 
-static void __init s3c2410_timer_init (void)
+static void __init s3c2410_timer_resources(void)
+{
+        struct platform_device tmpdev;
+
+        tmpdev.dev.bus = &platform_bus_type;
+        tmpdev.id = 4;
+
+        timerclk = clk_get(NULL, "timers");
+        if (IS_ERR(timerclk))
+                panic("failed to get clock for system timer");
+
+        clk_enable(timerclk);
+
+        if (!use_tclk1_12()) {
+                tin = clk_get(&tmpdev.dev, "pwm-tin");
+                if (IS_ERR(tin))
+                        panic("failed to get pwm-tin clock for system timer");
+
+                tdiv = clk_get(&tmpdev.dev, "pwm-tdiv");
+                if (IS_ERR(tdiv))
+                        panic("failed to get pwm-tdiv clock for system timer");
+        }
+
+        clk_enable(tin);
+}
+
+static void __init s3c2410_timer_init(void)
 {
+        s3c2410_timer_resources();
         s3c2410_timer_setup();
         setup_irq(IRQ_TIMER4, &s3c2410_timer_irq);
 }
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 0af3872fb763..2c8a2f5d75ff 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -6,8 +6,8 @@
 
 config PLAT_S3C24XX
         bool
-        depends on ARCH_S3C2410
-        default y if ARCH_S3C2410
+        depends on ARCH_S3C2410 || ARCH_S3C24A0
+        default y
         select NO_IOPORT
         select ARCH_REQUIRE_GPIOLIB
         help
@@ -15,6 +15,19 @@ config PLAT_S3C24XX
 
 if PLAT_S3C24XX
 
+# code that is shared between a number of the s3c24xx implementations
+
+config S3C2410_CLOCK
+        bool
+        help
+          Clock code for the S3C2410, and similar processors which
+          is currently includes the S3C2410, S3C2440, S3C2442.
+
+config S3C24XX_DCLK
+        bool
+        help
+          Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
+
 config CPU_S3C244X
         bool
         depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
@@ -28,6 +41,27 @@ config S3C24XX_PWM
           Support for exporting the PWM timer blocks via the pwm device
           system.
 
+
+# gpio configurations
+
+config S3C24XX_GPIO_EXTRA
+        int
+        default 128 if S3C24XX_GPIO_EXTRA128
+        default 64 if S3C24XX_GPIO_EXTRA64
+        default 0
+
+config S3C24XX_GPIO_EXTRA64
+        bool
+        help
+          Add an extra 64 gpio numbers to the available GPIO pool. This is
+          available for boards that need extra gpios for external devices.
+
+config S3C24XX_GPIO_EXTRA128
+        bool
+        help
+          Add an extra 128 gpio numbers to the available GPIO pool. This is
+          available for boards that need extra gpios for external devices.
+
 config PM_SIMTEC
         bool
         help
@@ -49,6 +83,29 @@ config S3C2410_DMA_DEBUG
           Enable debugging output for the DMA code. This option sends info
           to the kernel log, at priority KERN_DEBUG.
 
+config S3C24XX_ADC
+        bool "ADC common driver support"
+        help
+          Core support for the ADC block found in the S3C24XX SoC systems
+          for drivers such as the touchscreen and hwmon to use to share
+          this resource.
+
+# SPI default pin configuration code
+
+config S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13
+        bool
+        help
+          SPI GPIO configuration code for BUS0 when connected to
+          GPE11, GPE12 and GPE13.
+
+config S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7
+        bool
+        help
+          SPI GPIO configuration code for BUS 1 when connected to
+          GPG5, GPG6 and GPG7.
+
+# common code for s3c24xx based machines, such as the SMDKs.
+
 config MACH_SMDK
         bool
         help
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index d82767b2b833..1e0767b266b8 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -17,9 +17,8 @@ obj-y				+= irq.o
 obj-y                           += devs.o
 obj-y                           += gpio.o
 obj-y                           += gpiolib.o
-obj-y                           += time.o
 obj-y                           += clock.o
-obj-y                           += pwm-clock.o
+obj-$(CONFIG_S3C24XX_DCLK)      += clock-dclk.o
 
 # Architecture dependant builds
 
@@ -30,5 +29,18 @@ obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
 obj-$(CONFIG_PM)                += pm.o
 obj-$(CONFIG_PM)                += sleep.o
 obj-$(CONFIG_HAVE_PWM)          += pwm.o
+obj-$(CONFIG_S3C2410_CLOCK)     += s3c2410-clock.o
 obj-$(CONFIG_S3C2410_DMA)       += dma.o
+obj-$(CONFIG_S3C24XX_ADC)       += adc.o
+
+# device specific setup and/or initialisation
+obj-$(CONFIG_ARCH_S3C2410)      += setup-i2c.o
+
+# SPI gpio central GPIO functions
+
+obj-$(CONFIG_S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13) += spi-bus0-gpe11_12_13.o
+obj-$(CONFIG_S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7)    += spi-bus1-gpg5_6_7.o
+
+# machine common support
+
 obj-$(CONFIG_MACH_SMDK)         += common-smdk.o
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
new file mode 100644
index 000000000000..9a5c767e0a42
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -0,0 +1,372 @@
+/* arch/arm/plat-s3c24xx/adc.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
+ *
+ * S3C24XX ADC device core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/list.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <plat/regs-adc.h>
+#include <plat/adc.h>
+
+/* This driver is designed to control the usage of the ADC block between
+ * the touchscreen and any other drivers that may need to use it, such as
+ * the hwmon driver.
+ *
+ * Priority will be given to the touchscreen driver, but as this itself is
+ * rate limited it should not starve other requests which are processed in
+ * order that they are received.
+ *
+ * Each user registers to get a client block which uniquely identifies it
+ * and stores information such as the necessary functions to callback when
+ * action is required.
+ */
+
+struct s3c_adc_client {
+        struct platform_device  *pdev;
+        struct list_head         pend;
+
+        unsigned int             nr_samples;
+        unsigned char            is_ts;
+        unsigned char            channel;
+
+        void    (*select_cb)(unsigned selected);
+        void    (*convert_cb)(unsigned val1, unsigned val2);
+};
+
+struct adc_device {
+        struct platform_device  *pdev;
+        struct platform_device  *owner;
+        struct clk              *clk;
+        struct s3c_adc_client   *cur;
+        struct s3c_adc_client   *ts_pend;
+        void __iomem            *regs;
+
+        unsigned int             prescale;
+
+        int                      irq;
+};
+
+static struct adc_device *adc_dev;
+
+static LIST_HEAD(adc_pending);
+
+#define adc_dbg(_adc, msg...) dev_dbg(&(_adc)->pdev->dev, msg)
+
+static inline void s3c_adc_convert(struct adc_device *adc)
+{
+        unsigned con = readl(adc->regs + S3C2410_ADCCON);
+
+        con |= S3C2410_ADCCON_ENABLE_START;
+        writel(con, adc->regs + S3C2410_ADCCON);
+}
+
+static inline void s3c_adc_select(struct adc_device *adc,
+                                  struct s3c_adc_client *client)
+{
+        unsigned con = readl(adc->regs + S3C2410_ADCCON);
+
+        client->select_cb(1);
+
+        con &= ~S3C2410_ADCCON_MUXMASK;
+        con &= ~S3C2410_ADCCON_STDBM;
+        con &= ~S3C2410_ADCCON_STARTMASK;
+
+        if (!client->is_ts)
+                con |= S3C2410_ADCCON_SELMUX(client->channel);
+
+        writel(con, adc->regs + S3C2410_ADCCON);
+}
+
+static void s3c_adc_dbgshow(struct adc_device *adc)
+{
+        adc_dbg(adc, "CON=%08x, TSC=%08x, DLY=%08x\n",
+                readl(adc->regs + S3C2410_ADCCON),
+                readl(adc->regs + S3C2410_ADCTSC),
+                readl(adc->regs + S3C2410_ADCDLY));
+}
+
+void s3c_adc_try(struct adc_device *adc)
+{
+        struct s3c_adc_client *next = adc->ts_pend;
+
+        if (!next && !list_empty(&adc_pending)) {
+                next = list_first_entry(&adc_pending,
+                                        struct s3c_adc_client, pend);
+                list_del(&next->pend);
+        } else
+                adc->ts_pend = NULL;
+
+        if (next) {
+                adc_dbg(adc, "new client is %p\n", next);
+                adc->cur = next;
+                s3c_adc_select(adc, next);
+                s3c_adc_convert(adc);
+                s3c_adc_dbgshow(adc);
+        }
+}
+
+int s3c_adc_start(struct s3c_adc_client *client,
+                  unsigned int channel, unsigned int nr_samples)
+{
+        struct adc_device *adc = adc_dev;
+        unsigned long flags;
+
+        if (!adc) {
+                printk(KERN_ERR "%s: failed to find adc\n", __func__);
+                return -EINVAL;
+        }
+
+        if (client->is_ts && adc->ts_pend)
+                return -EAGAIN;
+
+        local_irq_save(flags);
+
+        client->channel = channel;
+        client->nr_samples = nr_samples;
+
+        if (client->is_ts)
+                adc->ts_pend = client;
+        else
+                list_add_tail(&client->pend, &adc_pending);
+
+        if (!adc->cur)
+                s3c_adc_try(adc);
+        local_irq_restore(flags);
+
+        return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_adc_start);
+
+static void s3c_adc_default_select(unsigned select)
+{
+}
+
+struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
+                                        void (*select)(unsigned int selected),
+                                        void (*conv)(unsigned d0, unsigned d1),
+                                        unsigned int is_ts)
+{
+        struct s3c_adc_client *client;
+
+        WARN_ON(!pdev);
+        WARN_ON(!conv);
+
+        if (!select)
+                select = s3c_adc_default_select;
+
+        if (!conv || !pdev)
+                return ERR_PTR(-EINVAL);
+
+        client = kzalloc(sizeof(struct s3c_adc_client), GFP_KERNEL);
+        if (!client) {
+                dev_err(&pdev->dev, "no memory for adc client\n");
+                return ERR_PTR(-ENOMEM);
+        }
+
+        client->pdev = pdev;
+        client->is_ts = is_ts;
+        client->select_cb = select;
+        client->convert_cb = conv;
+
+        return client;
+}
+EXPORT_SYMBOL_GPL(s3c_adc_register);
+
+void s3c_adc_release(struct s3c_adc_client *client)
+{
+        /* We should really check that nothing is in progress. */
+        kfree(client);
+}
+EXPORT_SYMBOL_GPL(s3c_adc_release);
+
+static irqreturn_t s3c_adc_irq(int irq, void *pw)
+{
+        struct adc_device *adc = pw;
+        struct s3c_adc_client *client = adc->cur;
+        unsigned long flags;
+        unsigned data0, data1;
+
+        if (!client) {
+                dev_warn(&adc->pdev->dev, "%s: no adc pending\n", __func__);
+                return IRQ_HANDLED;
+        }
+
+        data0 = readl(adc->regs + S3C2410_ADCDAT0);
+        data1 = readl(adc->regs + S3C2410_ADCDAT1);
+        adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
+
+        (client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff);
+
+        if (--client->nr_samples > 0) {
+                /* fire another conversion for this */
+
+                client->select_cb(1);
+                s3c_adc_convert(adc);
+        } else {
+                local_irq_save(flags);
+                (client->select_cb)(0);
+                adc->cur = NULL;
+
+                s3c_adc_try(adc);
+                local_irq_restore(flags);
+        }
+
+        return IRQ_HANDLED;
+}
+
+static int s3c_adc_probe(struct platform_device *pdev)
+{
+        struct device *dev = &pdev->dev;
+        struct adc_device *adc;
+        struct resource *regs;
+        int ret;
+
+        adc = kzalloc(sizeof(struct adc_device), GFP_KERNEL);
+        if (adc == NULL) {
+                dev_err(dev, "failed to allocate adc_device\n");
+                return -ENOMEM;
+        }
+
+        adc->pdev = pdev;
+        adc->prescale = S3C2410_ADCCON_PRSCVL(49);
+
+        adc->irq = platform_get_irq(pdev, 1);
+        if (adc->irq <= 0) {
+                dev_err(dev, "failed to get adc irq\n");
+                ret = -ENOENT;
+                goto err_alloc;
+        }
+
+        ret = request_irq(adc->irq, s3c_adc_irq, 0, dev_name(dev), adc);
+        if (ret < 0) {
+                dev_err(dev, "failed to attach adc irq\n");
+                goto err_alloc;
+        }
+
+        adc->clk = clk_get(dev, "adc");
+        if (IS_ERR(adc->clk)) {
+                dev_err(dev, "failed to get adc clock\n");
+                ret = PTR_ERR(adc->clk);
+                goto err_irq;
+        }
+
+        regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (!regs) {
+                dev_err(dev, "failed to find registers\n");
+                ret = -ENXIO;
+                goto err_clk;
+        }
+
+        adc->regs = ioremap(regs->start, resource_size(regs));
+        if (!adc->regs) {
+                dev_err(dev, "failed to map registers\n");
+                ret = -ENXIO;
+                goto err_clk;
+        }
+
+        clk_enable(adc->clk);
+
+        writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
+               adc->regs + S3C2410_ADCCON);
+
+        dev_info(dev, "attached adc driver\n");
+
+        platform_set_drvdata(pdev, adc);
+        adc_dev = adc;
+
+        return 0;
+
+ err_clk:
+        clk_put(adc->clk);
+
+ err_irq:
+        free_irq(adc->irq, adc);
+
+ err_alloc:
+        kfree(adc);
+        return ret;
+}
+
+static int s3c_adc_remove(struct platform_device *pdev)
+{
+        struct adc_device *adc = platform_get_drvdata(pdev);
+
+        iounmap(adc->regs);
+        free_irq(adc->irq, adc);
+        clk_disable(adc->clk);
+        clk_put(adc->clk);
+        kfree(adc);
+
+        return 0;
+}
+
+#ifdef CONFIG_PM
+static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+        struct adc_device *adc = platform_get_drvdata(pdev);
+        u32 con;
+
+        con = readl(adc->regs + S3C2410_ADCCON);
+        con |= S3C2410_ADCCON_STDBM;
+        writel(con, adc->regs + S3C2410_ADCCON);
+
+        clk_disable(adc->clk);
+
+        return 0;
+}
+
+static int s3c_adc_resume(struct platform_device *pdev)
+{
+        struct adc_device *adc = platform_get_drvdata(pdev);
+
+        clk_enable(adc->clk);
+
+        writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
+               adc->regs + S3C2410_ADCCON);
+
+        return 0;
+}
+
+#else
+#define s3c_adc_suspend NULL
+#define s3c_adc_resume NULL
+#endif
+
+static struct platform_driver s3c_adc_driver = {
+        .driver         = {
+                .name   = "s3c24xx-adc",
+                .owner  = THIS_MODULE,
+        },
+        .probe          = s3c_adc_probe,
+        .remove         = __devexit_p(s3c_adc_remove),
+        .suspend        = s3c_adc_suspend,
+        .resume         = s3c_adc_resume,
+};
+
+static int __init adc_init(void)
+{
+        int ret;
+
+        ret = platform_driver_register(&s3c_adc_driver);
+        if (ret)
+                printk(KERN_ERR "%s: failed to add adc driver\n", __func__);
+
+        return ret;
+}
+
+arch_initcall(adc_init);
diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c
new file mode 100644
index 000000000000..5b75a797b5ab
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/clock-dclk.c
@@ -0,0 +1,194 @@
+/* linux/arch/arm/plat-s3c24xx/clock-dclk.c
+ *
+ * Copyright (c) 2004,2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C24XX - definitions for DCLK and CLKOUT registers
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/clock.h>
+#include <plat/cpu.h>
+
+/* clocks that could be registered by external code */
+
+static int s3c24xx_dclk_enable(struct clk *clk, int enable)
+{
+        unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON);
+
+        if (enable)
+                dclkcon |= clk->ctrlbit;
+        else
+                dclkcon &= ~clk->ctrlbit;
+
+        __raw_writel(dclkcon, S3C24XX_DCLKCON);
+
+        return 0;
+}
+
+static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
+{
+        unsigned long dclkcon;
+        unsigned int uclk;
+
+        if (parent == &clk_upll)
+                uclk = 1;
+        else if (parent == &clk_p)
+                uclk = 0;
+        else
+                return -EINVAL;
+
+        clk->parent = parent;
+
+        dclkcon = __raw_readl(S3C24XX_DCLKCON);
+
+        if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
+                if (uclk)
+                        dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
+                else
+                        dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
+        } else {
+                if (uclk)
+                        dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
+                else
+                        dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
+        }
+
+        __raw_writel(dclkcon, S3C24XX_DCLKCON);
+
+        return 0;
+}
+static unsigned long s3c24xx_calc_div(struct clk *clk, unsigned long rate)
+{
+        unsigned long div;
+
+        if ((rate == 0) || !clk->parent)
+                return 0;
+
+        div = clk_get_rate(clk->parent) / rate;
+        if (div < 2)
+                div = 2;
+        else if (div > 16)
+                div = 16;
+
+        return div;
+}
+
+static unsigned long s3c24xx_round_dclk_rate(struct clk *clk,
+        unsigned long rate)
+{
+        unsigned long div = s3c24xx_calc_div(clk, rate);
+
+        if (div == 0)
+                return 0;
+
+        return clk_get_rate(clk->parent) / div;
+}
+
+static int s3c24xx_set_dclk_rate(struct clk *clk, unsigned long rate)
+{
+        unsigned long mask, data, div = s3c24xx_calc_div(clk, rate);
+
+        if (div == 0)
+                return -EINVAL;
+
+        if (clk == &s3c24xx_dclk0) {
+                mask = S3C2410_DCLKCON_DCLK0_DIV_MASK |
+                        S3C2410_DCLKCON_DCLK0_CMP_MASK;
+                data = S3C2410_DCLKCON_DCLK0_DIV(div) |
+                        S3C2410_DCLKCON_DCLK0_CMP((div + 1) / 2);
+        } else if (clk == &s3c24xx_dclk1) {
+                mask = S3C2410_DCLKCON_DCLK1_DIV_MASK |
+                        S3C2410_DCLKCON_DCLK1_CMP_MASK;
+                data = S3C2410_DCLKCON_DCLK1_DIV(div) |
+                        S3C2410_DCLKCON_DCLK1_CMP((div + 1) / 2);
+        } else
+                return -EINVAL;
+
+        clk->rate = clk_get_rate(clk->parent) / div;
+        __raw_writel(((__raw_readl(S3C24XX_DCLKCON) & ~mask) | data),
+                S3C24XX_DCLKCON);
+        return clk->rate;
+}
+static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
+{
+        unsigned long mask;
+        unsigned long source;
+
+        /* calculate the MISCCR setting for the clock */
+
+        if (parent == &clk_xtal)
+                source = S3C2410_MISCCR_CLK0_MPLL;
+        else if (parent == &clk_upll)
+                source = S3C2410_MISCCR_CLK0_UPLL;
+        else if (parent == &clk_f)
+                source = S3C2410_MISCCR_CLK0_FCLK;
+        else if (parent == &clk_h)
+                source = S3C2410_MISCCR_CLK0_HCLK;
+        else if (parent == &clk_p)
+                source = S3C2410_MISCCR_CLK0_PCLK;
+        else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
+                source = S3C2410_MISCCR_CLK0_DCLK0;
+        else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
+                source = S3C2410_MISCCR_CLK0_DCLK0;
+        else
+                return -EINVAL;
+
+        clk->parent = parent;
+
+        if (clk == &s3c24xx_clkout0)
+                mask = S3C2410_MISCCR_CLK0_MASK;
+        else {
+                source <<= 4;
+                mask = S3C2410_MISCCR_CLK1_MASK;
+        }
+
+        s3c2410_modify_misccr(mask, source);
+        return 0;
+}
+
+/* external clock definitions */
+
+struct clk s3c24xx_dclk0 = {
+        .name           = "dclk0",
+        .id             = -1,
+        .ctrlbit        = S3C2410_DCLKCON_DCLK0EN,
+        .enable         = s3c24xx_dclk_enable,
+        .set_parent     = s3c24xx_dclk_setparent,
+        .set_rate       = s3c24xx_set_dclk_rate,
+        .round_rate     = s3c24xx_round_dclk_rate,
+};
+
+struct clk s3c24xx_dclk1 = {
+        .name           = "dclk1",
+        .id             = -1,
+        .ctrlbit        = S3C2410_DCLKCON_DCLK1EN,
+        .enable         = s3c24xx_dclk_enable,
+        .set_parent     = s3c24xx_dclk_setparent,
+        .set_rate       = s3c24xx_set_dclk_rate,
+        .round_rate     = s3c24xx_round_dclk_rate,
+};
+
+struct clk s3c24xx_clkout0 = {
+        .name           = "clkout0",
+        .id             = -1,
+        .set_parent     = s3c24xx_clkout_setparent,
+};
+
+struct clk s3c24xx_clkout1 = {
+        .name           = "clkout1",
+        .id             = -1,
+        .set_parent     = s3c24xx_clkout_setparent,
+};
diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
index a005ddbd9ef3..8474d05274bd 100644
--- a/arch/arm/plat-s3c24xx/clock.c
+++ b/arch/arm/plat-s3c24xx/clock.c
@@ -27,18 +27,8 @@
 */
 
 #include <linux/init.h>
-#include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/sysdev.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
 #include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -47,490 +37,23 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 
+#include <plat/cpu-freq.h>
+
 #include <plat/clock.h>
 #include <plat/cpu.h>
-
-/* clock information */
-
-static LIST_HEAD(clocks);
-
-DEFINE_MUTEX(clocks_mutex);
-
-/* enable and disable calls for use with the clk struct */
-
-static int clk_null_enable(struct clk *clk, int enable)
-{
-        return 0;
-}
-
-/* Clock API calls */
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-        struct clk *p;
-        struct clk *clk = ERR_PTR(-ENOENT);
-        int idno;
-
-        if (dev == NULL || dev->bus != &platform_bus_type)
-                idno = -1;
-        else
-                idno = to_platform_device(dev)->id;
-
-        mutex_lock(&clocks_mutex);
-
-        list_for_each_entry(p, &clocks, list) {
-                if (p->id == idno &&
-                    strcmp(id, p->name) == 0 &&
-                    try_module_get(p->owner)) {
-                        clk = p;
-                        break;
-                }
-        }
-
-        /* check for the case where a device was supplied, but the
-         * clock that was being searched for is not device specific */
-
-        if (IS_ERR(clk)) {
-                list_for_each_entry(p, &clocks, list) {
-                        if (p->id == -1 && strcmp(id, p->name) == 0 &&
-                            try_module_get(p->owner)) {
-                                clk = p;
-                                break;
-                        }
-                }
-        }
-
-        mutex_unlock(&clocks_mutex);
-        return clk;
-}
-
-void clk_put(struct clk *clk)
-{
-        module_put(clk->owner);
-}
-
-int clk_enable(struct clk *clk)
-{
-        if (IS_ERR(clk) || clk == NULL)
-                return -EINVAL;
-
-        clk_enable(clk->parent);
-
-        mutex_lock(&clocks_mutex);
-
-        if ((clk->usage++) == 0)
-                (clk->enable)(clk, 1);
-
-        mutex_unlock(&clocks_mutex);
-        return 0;
-}
-
-void clk_disable(struct clk *clk)
-{
-        if (IS_ERR(clk) || clk == NULL)
-                return;
-
-        mutex_lock(&clocks_mutex);
-
-        if ((--clk->usage) == 0)
-                (clk->enable)(clk, 0);
-
-        mutex_unlock(&clocks_mutex);
-        clk_disable(clk->parent);
-}
-
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-        if (IS_ERR(clk))
-                return 0;
-
-        if (clk->rate != 0)
-                return clk->rate;
-
-        if (clk->get_rate != NULL)
-                return (clk->get_rate)(clk);
-
-        if (clk->parent != NULL)
-                return clk_get_rate(clk->parent);
-
-        return clk->rate;
-}
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-        if (!IS_ERR(clk) && clk->round_rate)
-                return (clk->round_rate)(clk, rate);
-
-        return rate;
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-        int ret;
-
-        if (IS_ERR(clk))
-                return -EINVAL;
-
-        /* We do not default just do a clk->rate = rate as
-         * the clock may have been made this way by choice.
-         */
-
-        WARN_ON(clk->set_rate == NULL);
-
-        if (clk->set_rate == NULL)
-                return -EINVAL;
-
-        mutex_lock(&clocks_mutex);
-        ret = (clk->set_rate)(clk, rate);
-        mutex_unlock(&clocks_mutex);
-
-        return ret;
-}
-
-struct clk *clk_get_parent(struct clk *clk)
-{
-        return clk->parent;
-}
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-        int ret = 0;
-
-        if (IS_ERR(clk))
-                return -EINVAL;
-
-        mutex_lock(&clocks_mutex);
-
-        if (clk->set_parent)
-                ret = (clk->set_parent)(clk, parent);
-
-        mutex_unlock(&clocks_mutex);
-
-        return ret;
-}
-
-EXPORT_SYMBOL(clk_get);
-EXPORT_SYMBOL(clk_put);
-EXPORT_SYMBOL(clk_enable);
-EXPORT_SYMBOL(clk_disable);
-EXPORT_SYMBOL(clk_get_rate);
-EXPORT_SYMBOL(clk_round_rate);
-EXPORT_SYMBOL(clk_set_rate);
-EXPORT_SYMBOL(clk_get_parent);
-EXPORT_SYMBOL(clk_set_parent);
-
-/* base clocks */
-
-static int clk_default_setrate(struct clk *clk, unsigned long rate)
-{
-        clk->rate = rate;
-        return 0;
-}
-
-struct clk clk_xtal = {
-        .name           = "xtal",
-        .id             = -1,
-        .rate           = 0,
-        .parent         = NULL,
-        .ctrlbit        = 0,
-};
-
-struct clk clk_mpll = {
-        .name           = "mpll",
-        .id             = -1,
-        .set_rate       = clk_default_setrate,
-};
-
-struct clk clk_upll = {
-        .name           = "upll",
-        .id             = -1,
-        .parent         = NULL,
-        .ctrlbit        = 0,
-};
-
-struct clk clk_f = {
-        .name           = "fclk",
-        .id             = -1,
-        .rate           = 0,
-        .parent         = &clk_mpll,
-        .ctrlbit        = 0,
-        .set_rate       = clk_default_setrate,
-};
-
-struct clk clk_h = {
-        .name           = "hclk",
-        .id             = -1,
-        .rate           = 0,
-        .parent         = NULL,
-        .ctrlbit        = 0,
-        .set_rate       = clk_default_setrate,
-};
-
-struct clk clk_p = {
-        .name           = "pclk",
-        .id             = -1,
-        .rate           = 0,
-        .parent         = NULL,
-        .ctrlbit        = 0,
-        .set_rate       = clk_default_setrate,
-};
-
-struct clk clk_usb_bus = {
-        .name           = "usb-bus",
-        .id             = -1,
-        .rate           = 0,
-        .parent         = &clk_upll,
-};
-
-/* clocks that could be registered by external code */
-
-static int s3c24xx_dclk_enable(struct clk *clk, int enable)
-{
-        unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON);
-
-        if (enable)
-                dclkcon |= clk->ctrlbit;
-        else
-                dclkcon &= ~clk->ctrlbit;
-
-        __raw_writel(dclkcon, S3C24XX_DCLKCON);
-
-        return 0;
-}
-
-static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
-{
-        unsigned long dclkcon;
-        unsigned int uclk;
-
-        if (parent == &clk_upll)
-                uclk = 1;
-        else if (parent == &clk_p)
-                uclk = 0;
-        else
-                return -EINVAL;
-
-        clk->parent = parent;
-
-        dclkcon = __raw_readl(S3C24XX_DCLKCON);
-
-        if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
-                if (uclk)
-                        dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
-                else
-                        dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
-        } else {
-                if (uclk)
-                        dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
-                else
-                        dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
-        }
-
-        __raw_writel(dclkcon, S3C24XX_DCLKCON);
-
-        return 0;
-}
-
-static unsigned long s3c24xx_calc_div(struct clk *clk, unsigned long rate)
-{
-        unsigned long div;
-
-        if ((rate == 0) || !clk->parent)
-                return 0;
-
-        div = clk_get_rate(clk->parent) / rate;
-        if (div < 2)
-                div = 2;
-        else if (div > 16)
-                div = 16;
-
-        return div;
-}
-
-static unsigned long s3c24xx_round_dclk_rate(struct clk *clk,
-        unsigned long rate)
-{
-        unsigned long div = s3c24xx_calc_div(clk, rate);
-
-        if (div == 0)
-                return 0;
-
-        return clk_get_rate(clk->parent) / div;
-}
-
-static int s3c24xx_set_dclk_rate(struct clk *clk, unsigned long rate)
-{
-        unsigned long mask, data, div = s3c24xx_calc_div(clk, rate);
-
-        if (div == 0)
-                return -EINVAL;
-
-        if (clk == &s3c24xx_dclk0) {
-                mask = S3C2410_DCLKCON_DCLK0_DIV_MASK |
-                        S3C2410_DCLKCON_DCLK0_CMP_MASK;
-                data = S3C2410_DCLKCON_DCLK0_DIV(div) |
-                        S3C2410_DCLKCON_DCLK0_CMP((div + 1) / 2);
-        } else if (clk == &s3c24xx_dclk1) {
-                mask = S3C2410_DCLKCON_DCLK1_DIV_MASK |
-                        S3C2410_DCLKCON_DCLK1_CMP_MASK;
-                data = S3C2410_DCLKCON_DCLK1_DIV(div) |
-                        S3C2410_DCLKCON_DCLK1_CMP((div + 1) / 2);
-        } else
-                return -EINVAL;
-
-        clk->rate = clk_get_rate(clk->parent) / div;
-        __raw_writel(((__raw_readl(S3C24XX_DCLKCON) & ~mask) | data),
-                S3C24XX_DCLKCON);
-        return clk->rate;
-}
-
-static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
-{
-        unsigned long mask;
-        unsigned long source;
-
-        /* calculate the MISCCR setting for the clock */
-
-        if (parent == &clk_xtal)
-                source = S3C2410_MISCCR_CLK0_MPLL;
-        else if (parent == &clk_upll)
-                source = S3C2410_MISCCR_CLK0_UPLL;
-        else if (parent == &clk_f)
-                source = S3C2410_MISCCR_CLK0_FCLK;
-        else if (parent == &clk_h)
-                source = S3C2410_MISCCR_CLK0_HCLK;
-        else if (parent == &clk_p)
-                source = S3C2410_MISCCR_CLK0_PCLK;
-        else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
-                source = S3C2410_MISCCR_CLK0_DCLK0;
-        else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
-                source = S3C2410_MISCCR_CLK0_DCLK0;
-        else
-                return -EINVAL;
-
-        clk->parent = parent;
-
-        if (clk == &s3c24xx_clkout0)
-                mask = S3C2410_MISCCR_CLK0_MASK;
-        else {
-                source <<= 4;
-                mask = S3C2410_MISCCR_CLK1_MASK;
-        }
-
-        s3c2410_modify_misccr(mask, source);
-        return 0;
-}
-
-/* external clock definitions */
-
-struct clk s3c24xx_dclk0 = {
-        .name           = "dclk0",
-        .id             = -1,
-        .ctrlbit        = S3C2410_DCLKCON_DCLK0EN,
-        .enable         = s3c24xx_dclk_enable,
-        .set_parent     = s3c24xx_dclk_setparent,
-        .set_rate       = s3c24xx_set_dclk_rate,
-        .round_rate     = s3c24xx_round_dclk_rate,
-};
-
-struct clk s3c24xx_dclk1 = {
-        .name           = "dclk1",
-        .id             = -1,
-        .ctrlbit        = S3C2410_DCLKCON_DCLK1EN,
-        .enable         = s3c24xx_dclk_enable,
-        .set_parent     = s3c24xx_dclk_setparent,
-        .set_rate       = s3c24xx_set_dclk_rate,
-        .round_rate     = s3c24xx_round_dclk_rate,
-};
-
-struct clk s3c24xx_clkout0 = {
-        .name           = "clkout0",
-        .id             = -1,
-        .set_parent     = s3c24xx_clkout_setparent,
-};
-
-struct clk s3c24xx_clkout1 = {
-        .name           = "clkout1",
-        .id             = -1,
-        .set_parent     = s3c24xx_clkout_setparent,
-};
-
-struct clk s3c24xx_uclk = {
-        .name           = "uclk",
-        .id             = -1,
-};
-
-/* initialise the clock system */
-
-int s3c24xx_register_clock(struct clk *clk)
-{
-        clk->owner = THIS_MODULE;
-
-        if (clk->enable == NULL)
-                clk->enable = clk_null_enable;
-
-        /* add to the list of available clocks */
-
-        mutex_lock(&clocks_mutex);
-        list_add(&clk->list, &clocks);
-        mutex_unlock(&clocks_mutex);
-
-        return 0;
-}
-
-int s3c24xx_register_clocks(struct clk **clks, int nr_clks)
-{
-        int fails = 0;
-
-        for (; nr_clks > 0; nr_clks--, clks++) {
-                if (s3c24xx_register_clock(*clks) < 0)
-                        fails++;
-        }
-
-        return fails;
-}
+#include <plat/pll.h>
 
 /* initalise all the clocks */
 
-int __init s3c24xx_setup_clocks(unsigned long xtal,
-                                unsigned long fclk,
-                                unsigned long hclk,
-                                unsigned long pclk)
+void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
+                                           unsigned long hclk,
+                                           unsigned long pclk)
 {
-        printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n");
-
-        /* initialise the main system clocks */
-
-        clk_xtal.rate = xtal;
-        clk_upll.rate = s3c2410_get_pll(__raw_readl(S3C2410_UPLLCON), xtal);
+        clk_upll.rate = s3c24xx_get_pll(__raw_readl(S3C2410_UPLLCON),
+                                        clk_xtal.rate);
 
         clk_mpll.rate = fclk;
         clk_h.rate = hclk;
         clk_p.rate = pclk;
         clk_f.rate = fclk;
-
-        /* assume uart clocks are correctly setup */
-
-        /* register our clocks */
-
-        if (s3c24xx_register_clock(&clk_xtal) < 0)
-                printk(KERN_ERR "failed to register master xtal\n");
-
-        if (s3c24xx_register_clock(&clk_mpll) < 0)
-                printk(KERN_ERR "failed to register mpll clock\n");
-
-        if (s3c24xx_register_clock(&clk_upll) < 0)
-                printk(KERN_ERR "failed to register upll clock\n");
-
-        if (s3c24xx_register_clock(&clk_f) < 0)
-                printk(KERN_ERR "failed to register cpu fclk\n");
-
-        if (s3c24xx_register_clock(&clk_h) < 0)
-                printk(KERN_ERR "failed to register cpu hclk\n");
-
-        if (s3c24xx_register_clock(&clk_p) < 0)
-                printk(KERN_ERR "failed to register cpu pclk\n");
-
-        return 0;
 }
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 22a329513c0f..542062f8cbc1 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -30,7 +30,6 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/io.h>
-#include <linux/delay.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -55,16 +54,6 @@
 #include <plat/s3c2442.h>
 #include <plat/s3c2443.h>
 
-struct cpu_table {
-        unsigned long   idcode;
-        unsigned long   idmask;
-        void            (*map_io)(struct map_desc *mach_desc, int size);
-        void            (*init_uarts)(struct s3c2410_uartcfg *cfg, int no);
-        void            (*init_clocks)(int xtal);
-        int             (*init)(void);
-        const char      *name;
-};
-
 /* table of supported CPUs */
 
 static const char name_s3c2400[]  = "S3C2400";
@@ -169,23 +158,7 @@ static struct map_desc s3c_iodesc[] __initdata = {
         IODESC_ENT(UART)
 };
 
-static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode)
-{
-        struct cpu_table *tab;
-        int count;
-
-        tab = cpu_ids;
-        for (count = 0; count < ARRAY_SIZE(cpu_ids); count++, tab++) {
-                if ((idcode & tab->idmask) == tab->idcode)
-                        return tab;
-        }
-
-        return NULL;
-}
-
-/* cpu information */
-
-static struct cpu_table *cpu;
+/* read cpu identificaiton code */
 
 static unsigned long s3c24xx_read_idcode_v5(void)
 {
@@ -231,6 +204,7 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
         unsigned long idcode = 0x0;
 
         /* initialise the io descriptors we need for initialisation */
+        iotable_init(mach_desc, size);
         iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
 
         if (cpu_architecture() >= CPU_ARCH_ARMv5) {
@@ -239,117 +213,7 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
                 idcode = s3c24xx_read_idcode_v4();
         }
 
-        cpu = s3c_lookup_cpu(idcode);
-
-        if (cpu == NULL) {
-                printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode);
-                panic("Unknown S3C24XX CPU");
-        }
-
-        printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
-
-        if (cpu->map_io == NULL || cpu->init == NULL) {
-                printk(KERN_ERR "CPU %s support not enabled\n", cpu->name);
-                panic("Unsupported S3C24XX CPU");
-        }
-
         arm_pm_restart = s3c24xx_pm_restart;
 
-        (cpu->map_io)(mach_desc, size);
-}
-
-/* s3c24xx_init_clocks
- *
- * Initialise the clock subsystem and associated information from the
- * given master crystal value.
- *
- * xtal  = 0 -> use default PLL crystal value (normally 12MHz)
- *      != 0 -> PLL crystal value in Hz
-*/
-
-void __init s3c24xx_init_clocks(int xtal)
-{
-        if (xtal == 0)
-                xtal = 12*1000*1000;
-
-        if (cpu == NULL)
-                panic("s3c24xx_init_clocks: no cpu setup?\n");
-
-        if (cpu->init_clocks == NULL)
-                panic("s3c24xx_init_clocks: cpu has no clock init\n");
-        else
-                (cpu->init_clocks)(xtal);
+        s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
 }
-
-/* uart management */
-
-static int nr_uarts __initdata = 0;
-
-static struct s3c2410_uartcfg uart_cfgs[3];
-
-/* s3c24xx_init_uartdevs
- *
- * copy the specified platform data and configuration into our central
- * set of devices, before the data is thrown away after the init process.
- *
- * This also fills in the array passed to the serial driver for the
- * early initialisation of the console.
-*/
-
-void __init s3c24xx_init_uartdevs(char *name,
-                                  struct s3c24xx_uart_resources *res,
-                                  struct s3c2410_uartcfg *cfg, int no)
-{
-        struct platform_device *platdev;
-        struct s3c2410_uartcfg *cfgptr = uart_cfgs;
-        struct s3c24xx_uart_resources *resp;
-        int uart;
-
-        memcpy(cfgptr, cfg, sizeof(struct s3c2410_uartcfg) * no);
-
-        for (uart = 0; uart < no; uart++, cfg++, cfgptr++) {
-                platdev = s3c24xx_uart_src[cfgptr->hwport];
-
-                resp = res + cfgptr->hwport;
-
-                s3c24xx_uart_devs[uart] = platdev;
-
-                platdev->name = name;
-                platdev->resource = resp->resources;
-                platdev->num_resources = resp->nr_resources;
-
-                platdev->dev.platform_data = cfgptr;
-        }
-
-        nr_uarts = no;
-}
-
-void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-        if (cpu == NULL)
-                return;
-
-        if (cpu->init_uarts == NULL) {
-                printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n");
-        } else
-                (cpu->init_uarts)(cfg, no);
-}
-
-static int __init s3c_arch_init(void)
-{
-        int ret;
-
-        // do the correct init for cpu
-
-        if (cpu == NULL)
-                panic("s3c_arch_init: NULL cpu\n");
-
-        ret = (cpu->init)();
-        if (ret != 0)
-                return ret;
-
-        ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts);
-        return ret;
-}
-
-arch_initcall(s3c_arch_init);
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index adf535aaf43a..16ac01d9b8ab 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -76,6 +76,19 @@ static struct resource s3c2410_uart2_resource[] = {
         }
 };
 
+static struct resource s3c2410_uart3_resource[] = {
+        [0] = {
+                .start = S3C2443_PA_UART3,
+                .end   = S3C2443_PA_UART3 + 0x3fff,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start = IRQ_S3CUART_RX3,
+                .end   = IRQ_S3CUART_ERR3,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
 struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
         [0] = {
                 .resources      = s3c2410_uart0_resource,
@@ -89,6 +102,10 @@ struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
                 .resources      = s3c2410_uart2_resource,
                 .nr_resources   = ARRAY_SIZE(s3c2410_uart2_resource),
         },
+        [3] = {
+                .resources      = s3c2410_uart3_resource,
+                .nr_resources   = ARRAY_SIZE(s3c2410_uart3_resource),
+        },
 };
 
 /* yart devices */
@@ -105,13 +122,18 @@ static struct platform_device s3c24xx_uart_device2 = {
         .id             = 2,
 };
 
-struct platform_device *s3c24xx_uart_src[3] = {
+static struct platform_device s3c24xx_uart_device3 = {
+        .id             = 3,
+};
+
+struct platform_device *s3c24xx_uart_src[4] = {
         &s3c24xx_uart_device0,
         &s3c24xx_uart_device1,
         &s3c24xx_uart_device2,
+        &s3c24xx_uart_device3,
 };
 
-struct platform_device *s3c24xx_uart_devs[3] = {
+struct platform_device *s3c24xx_uart_devs[4] = {
 };
 
 /* USB Host Controller */
@@ -192,8 +214,8 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
 
 static struct resource s3c_nand_resource[] = {
         [0] = {
-                .start = S3C2410_PA_NAND,
-                .end   = S3C2410_PA_NAND + S3C24XX_SZ_NAND - 1,
+                .start = S3C24XX_PA_NAND,
+                .end   = S3C24XX_PA_NAND + S3C24XX_SZ_NAND - 1,
                 .flags = IORESOURCE_MEM,
         }
 };
@@ -271,31 +293,6 @@ struct platform_device s3c_device_wdt = {
 
 EXPORT_SYMBOL(s3c_device_wdt);
 
-/* I2C */
-
-static struct resource s3c_i2c_resource[] = {
-        [0] = {
-                .start = S3C24XX_PA_IIC,
-                .end   = S3C24XX_PA_IIC + S3C24XX_SZ_IIC - 1,
-                .flags = IORESOURCE_MEM,
-        },
-        [1] = {
-                .start = IRQ_IIC,
-                .end   = IRQ_IIC,
-                .flags = IORESOURCE_IRQ,
-        }
-
-};
-
-struct platform_device s3c_device_i2c = {
-        .name             = "s3c2410-i2c",
-        .id               = -1,
-        .num_resources    = ARRAY_SIZE(s3c_i2c_resource),
-        .resource         = s3c_i2c_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_i2c);
-
 /* IIS */
 
 static struct resource s3c_iis_resource[] = {
@@ -372,18 +369,26 @@ static struct resource s3c_adc_resource[] = {
 };
 
 struct platform_device s3c_device_adc = {
-        .name             = "s3c2410-adc",
+        .name             = "s3c24xx-adc",
         .id               = -1,
         .num_resources    = ARRAY_SIZE(s3c_adc_resource),
         .resource         = s3c_adc_resource,
 };
 
+/* HWMON */
+
+struct platform_device s3c_device_hwmon = {
+        .name           = "s3c24xx-hwmon",
+        .id             = -1,
+        .dev.parent     = &s3c_device_adc.dev,
+};
+
 /* SDI */
 
 static struct resource s3c_sdi_resource[] = {
         [0] = {
-                .start = S3C2410_PA_SDI,
-                .end   = S3C2410_PA_SDI + S3C24XX_SZ_SDI - 1,
+                .start = S3C24XX_PA_SDI,
+                .end   = S3C24XX_PA_SDI + S3C24XX_SZ_SDI - 1,
                 .flags = IORESOURCE_MEM,
         },
         [1] = {
@@ -403,36 +408,6 @@ struct platform_device s3c_device_sdi = {
 
 EXPORT_SYMBOL(s3c_device_sdi);
 
-/* High-speed MMC/SD */
-
-static struct resource s3c_hsmmc_resource[] = {
-        [0] = {
-                .start = S3C2443_PA_HSMMC,
-                .end   = S3C2443_PA_HSMMC + S3C2443_SZ_HSMMC - 1,
-                .flags = IORESOURCE_MEM,
-        },
-        [1] = {
-                .start = IRQ_S3C2443_HSMMC,
-                .end   = IRQ_S3C2443_HSMMC,
-                .flags = IORESOURCE_IRQ,
-        }
-};
-
-static u64 s3c_device_hsmmc_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_hsmmc = {
-        .name             = "s3c-sdhci",
-        .id               = -1,
-        .num_resources    = ARRAY_SIZE(s3c_hsmmc_resource),
-        .resource         = s3c_hsmmc_resource,
-        .dev              = {
-                .dma_mask = &s3c_device_hsmmc_dmamask,
-                .coherent_dma_mask = 0xffffffffUL
-        }
-};
-
-
-
 /* SPI (0) */
 
 static struct resource s3c_spi0_resource[] = {
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 63bb22b973e3..aee2aeb46c60 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -25,7 +25,6 @@
 #include <linux/sysdev.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
-#include <linux/delay.h>
 #include <linux/io.h>
 
 #include <asm/system.h>
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 3caec6bad3eb..f95c6c9d9f1a 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -19,104 +19,12 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
+#include <plat/gpio-core.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <mach/regs-gpio.h>
 
-struct s3c24xx_gpio_chip {
-        struct gpio_chip        chip;
-        void __iomem            *base;
-};
-
-static inline struct s3c24xx_gpio_chip *to_s3c_chip(struct gpio_chip *gpc)
-{
-        return container_of(gpc, struct s3c24xx_gpio_chip, chip);
-}
-
-/* these routines are exported for use by other parts of the platform
- * and system support, but are not intended to be used directly by the
- * drivers themsevles.
- */
-
-static int s3c24xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
-{
-        struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
-        void __iomem *base = ourchip->base;
-        unsigned long flags;
-        unsigned long con;
-
-        local_irq_save(flags);
-
-        con = __raw_readl(base + 0x00);
-        con &= ~(3 << (offset * 2));
-        con |= (S3C2410_GPIO_OUTPUT & 0xf) << (offset * 2);
-
-        __raw_writel(con, base + 0x00);
-
-        local_irq_restore(flags);
-        return 0;
-}
-
-static int s3c24xx_gpiolib_output(struct gpio_chip *chip,
-                                  unsigned offset, int value)
-{
-        struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
-        void __iomem *base = ourchip->base;
-        unsigned long flags;
-        unsigned long dat;
-        unsigned long con;
-
-        local_irq_save(flags);
-
-        dat = __raw_readl(base + 0x04);
-        dat &= ~(1 << offset);
-        if (value)
-                dat |= 1 << offset;
-        __raw_writel(dat, base + 0x04);
-
-        con = __raw_readl(base + 0x00);
-        con &= ~(3 << (offset * 2));
-        con |= (S3C2410_GPIO_OUTPUT & 0xf) << (offset * 2);
-
-        __raw_writel(con, base + 0x00);
-        __raw_writel(dat, base + 0x04);
-
-        local_irq_restore(flags);
-        return 0;
-}
-
-static void s3c24xx_gpiolib_set(struct gpio_chip *chip,
-                                unsigned offset, int value)
-{
-        struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
-        void __iomem *base = ourchip->base;
-        unsigned long flags;
-        unsigned long dat;
-
-        local_irq_save(flags);
-
-        dat = __raw_readl(base + 0x04);
-        dat &= ~(1 << offset);
-        if (value)
-                dat |= 1 << offset;
-        __raw_writel(dat, base + 0x04);
-
-        local_irq_restore(flags);
-}
-
-static int s3c24xx_gpiolib_get(struct gpio_chip *chip, unsigned offset)
-{
-        struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
-        unsigned long val;
-
-        val = __raw_readl(ourchip->base + 0x04);
-        val >>= offset;
-        val &= 1;
-
-        return val;
-}
-
 static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
 {
         return -EINVAL;
@@ -125,7 +33,7 @@ static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
 static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
                                         unsigned offset, int value)
 {
-        struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
+        struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
         void __iomem *base = ourchip->base;
         unsigned long flags;
         unsigned long dat;
@@ -151,7 +59,7 @@ static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
         return 0;
 }
 
-static struct s3c24xx_gpio_chip gpios[] = {
+struct s3c_gpio_chip s3c24xx_gpios[] = {
         [0] = {
                 .base   = S3C24XX_GPIO_BASE(S3C2410_GPA0),
                 .chip   = {
@@ -161,8 +69,6 @@ static struct s3c24xx_gpio_chip gpios[] = {
                         .ngpio                  = 24,
                         .direction_input        = s3c24xx_gpiolib_banka_input,
                         .direction_output       = s3c24xx_gpiolib_banka_output,
-                        .set                    = s3c24xx_gpiolib_set,
-                        .get                    = s3c24xx_gpiolib_get,
                 },
         },
         [1] = {
@@ -172,10 +78,6 @@ static struct s3c24xx_gpio_chip gpios[] = {
                         .owner                  = THIS_MODULE,
                         .label                  = "GPIOB",
                         .ngpio                  = 16,
-                        .direction_input        = s3c24xx_gpiolib_input,
-                        .direction_output       = s3c24xx_gpiolib_output,
-                        .set                    = s3c24xx_gpiolib_set,
-                        .get                    = s3c24xx_gpiolib_get,
                 },
         },
         [2] = {
@@ -185,10 +87,6 @@ static struct s3c24xx_gpio_chip gpios[] = {
                         .owner                  = THIS_MODULE,
                         .label                  = "GPIOC",
                         .ngpio                  = 16,
-                        .direction_input        = s3c24xx_gpiolib_input,
-                        .direction_output       = s3c24xx_gpiolib_output,
-                        .set                    = s3c24xx_gpiolib_set,
-                        .get                    = s3c24xx_gpiolib_get,
                 },
         },
         [3] = {
@@ -198,10 +96,6 @@ static struct s3c24xx_gpio_chip gpios[] = {
                         .owner                  = THIS_MODULE,
                         .label                  = "GPIOD",
                         .ngpio                  = 16,
-                        .direction_input        = s3c24xx_gpiolib_input,
-                        .direction_output       = s3c24xx_gpiolib_output,
-                        .set                    = s3c24xx_gpiolib_set,
-                        .get                    = s3c24xx_gpiolib_get,
                 },
         },
         [4] = {
@@ -211,10 +105,6 @@ static struct s3c24xx_gpio_chip gpios[] = {
                         .label                  = "GPIOE",
                         .owner                  = THIS_MODULE,
                         .ngpio                  = 16,
-                        .direction_input        = s3c24xx_gpiolib_input,
-                        .direction_output       = s3c24xx_gpiolib_output,
-                        .set                    = s3c24xx_gpiolib_set,
-                        .get                    = s3c24xx_gpiolib_get,
                 },
         },
         [5] = {
@@ -224,10 +114,6 @@ static struct s3c24xx_gpio_chip gpios[] = {
                         .owner                  = THIS_MODULE,
                         .label                  = "GPIOF",
                         .ngpio                  = 8,
-                        .direction_input        = s3c24xx_gpiolib_input,
-                        .direction_output       = s3c24xx_gpiolib_output,
-                        .set                    = s3c24xx_gpiolib_set,
-                        .get                    = s3c24xx_gpiolib_get,
                 },
         },
         [6] = {
@@ -237,21 +123,17 @@ static struct s3c24xx_gpio_chip gpios[] = {
                         .owner                  = THIS_MODULE,
                         .label                  = "GPIOG",
                         .ngpio                  = 10,
-                        .direction_input        = s3c24xx_gpiolib_input,
-                        .direction_output       = s3c24xx_gpiolib_output,
-                        .set                    = s3c24xx_gpiolib_set,
-                        .get                    = s3c24xx_gpiolib_get,
                 },
         },
 };
 
 static __init int s3c24xx_gpiolib_init(void)
 {
-        struct s3c24xx_gpio_chip *chip = gpios;
+        struct s3c_gpio_chip *chip = s3c24xx_gpios;
         int gpn;
 
-        for (gpn = 0; gpn < ARRAY_SIZE(gpios); gpn++, chip++)
-                gpiochip_add(&chip->chip);
+        for (gpn = 0; gpn < ARRAY_SIZE(s3c24xx_gpios); gpn++, chip++)
+                s3c_gpiolib_add(chip);
 
         return 0;
 }
diff --git a/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h b/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
new file mode 100644
index 000000000000..a087de21bc20
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
@@ -0,0 +1,55 @@
+/* linux/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C24xx - pwm clock and timer support
+ */
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @cfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+        return tcfg == S3C2410_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+        return 1 << (1 + tcfg1);
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+        return 0;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+        return ilog2(div) - 1;
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK
diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h
new file mode 100644
index 000000000000..fef8ea8b8e1e
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/map.h
@@ -0,0 +1,99 @@
+/* linux/include/asm-arm/plat-s3c24xx/map.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_S3C24XX_MAP_H
+#define __ASM_PLAT_S3C24XX_MAP_H
+
+/* interrupt controller is the first thing we put in, to make
+ * the assembly code for the irq detection easier
+ */
+#define S3C24XX_VA_IRQ     S3C_VA_IRQ
+#define S3C2410_PA_IRQ     (0x4A000000)
+#define S3C24XX_SZ_IRQ     SZ_1M
+
+/* memory controller registers */
+#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
+#define S3C2410_PA_MEMCTRL (0x48000000)
+#define S3C24XX_SZ_MEMCTRL SZ_1M
+
+/* UARTs */
+#define S3C24XX_VA_UART    S3C_VA_UART
+#define S3C2410_PA_UART    (0x50000000)
+#define S3C24XX_SZ_UART    SZ_1M
+#define S3C_UART_OFFSET    (0x4000)
+
+/* Timers */
+#define S3C24XX_VA_TIMER   S3C_VA_TIMER
+#define S3C2410_PA_TIMER   (0x51000000)
+#define S3C24XX_SZ_TIMER   SZ_1M
+
+/* Clock and Power management */
+#define S3C24XX_VA_CLKPWR  S3C_VA_SYS
+#define S3C24XX_SZ_CLKPWR  SZ_1M
+
+/* USB Device port */
+#define S3C2410_PA_USBDEV  (0x52000000)
+#define S3C24XX_SZ_USBDEV  SZ_1M
+
+/* Watchdog */
+#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
+#define S3C2410_PA_WATCHDOG (0x53000000)
+#define S3C24XX_SZ_WATCHDOG SZ_1M
+
+/* Standard size definitions for peripheral blocks. */
+
+#define S3C24XX_SZ_IIS          SZ_1M
+#define S3C24XX_SZ_ADC          SZ_1M
+#define S3C24XX_SZ_SPI          SZ_1M
+#define S3C24XX_SZ_SDI          SZ_1M
+#define S3C24XX_SZ_NAND         SZ_1M
+#define S3C24XX_SZ_USBHOST      SZ_1M
+
+/* GPIO ports */
+
+/* the calculation for the VA of this must ensure that
+ * it is the same distance apart from the UART in the
+ * phsyical address space, as the initial mapping for the IO
+ * is done as a 1:1 maping. This puts it (currently) at
+ * 0xFA800000, which is not in the way of any current mapping
+ * by the base system.
+*/
+
+#define S3C2410_PA_GPIO    (0x56000000)
+#define S3C24XX_VA_GPIO    ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
+#define S3C24XX_SZ_GPIO    SZ_1M
+
+
+/* ISA style IO, for each machine to sort out mappings for, if it
+ * implements it. We reserve two 16M regions for ISA.
+ */
+
+#define S3C24XX_VA_ISA_WORD  S3C2410_ADDR(0x02000000)
+#define S3C24XX_VA_ISA_BYTE  S3C2410_ADDR(0x03000000)
+
+/* deal with the registers that move under the 2412/2413 */
+
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+#ifndef __ASSEMBLY__
+extern void __iomem *s3c24xx_va_gpio2;
+#endif
+#ifdef CONFIG_CPU_S3C2412_ONLY
+#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
+#else
+#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
+#endif
+#else
+#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
+#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
+#endif
+
+#endif /* __ASM_PLAT_S3C24XX_MAP_H */
diff --git a/arch/arm/plat-s3c24xx/include/plat/pll.h b/arch/arm/plat-s3c24xx/include/plat/pll.h
new file mode 100644
index 000000000000..7ea8bffa7a9c
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/pll.h
@@ -0,0 +1,37 @@
+/* linux/arch/arm/plat-s3c24xx/include/plat/pll.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C24xx - common pll registers and code
+ */
+
+#define S3C24XX_PLLCON_MDIVSHIFT        12
+#define S3C24XX_PLLCON_PDIVSHIFT        4
+#define S3C24XX_PLLCON_SDIVSHIFT        0
+#define S3C24XX_PLLCON_MDIVMASK         ((1<<(1+(19-12)))-1)
+#define S3C24XX_PLLCON_PDIVMASK         ((1<<5)-1)
+#define S3C24XX_PLLCON_SDIVMASK         3
+
+#include <asm/div64.h>
+
+static inline unsigned int
+s3c24xx_get_pll(unsigned int pllval, unsigned int baseclk)
+{
+        unsigned int mdiv, pdiv, sdiv;
+        uint64_t fvco;
+
+        mdiv = pllval >> S3C24XX_PLLCON_MDIVSHIFT;
+        pdiv = pllval >> S3C24XX_PLLCON_PDIVSHIFT;
+        sdiv = pllval >> S3C24XX_PLLCON_SDIVSHIFT;
+
+        mdiv &= S3C24XX_PLLCON_MDIVMASK;
+        pdiv &= S3C24XX_PLLCON_PDIVMASK;
+        sdiv &= S3C24XX_PLLCON_SDIVMASK;
+
+        fvco = (uint64_t)baseclk * (mdiv + 8);
+        do_div(fvco, (pdiv + 2) << sdiv);
+
+        return (unsigned int)fvco;
+}
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2400.h b/arch/arm/plat-s3c24xx/include/plat/s3c2400.h
index 3a5a16821af8..b3feaea5c70b 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2400.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2400.h
@@ -17,7 +17,7 @@
 
 extern  int s3c2400_init(void);
 
-extern void s3c2400_map_io(struct map_desc *mach_desc, int size);
+extern void s3c2400_map_io(void);
 
 extern void s3c2400_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
index 3cd1ec677b3f..a9ac9e29759e 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
@@ -15,7 +15,7 @@
 
 extern  int s3c2410_init(void);
 
-extern void s3c2410_map_io(struct map_desc *mach_desc, int size);
+extern void s3c2410_map_io(void);
 
 extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2412.h b/arch/arm/plat-s3c24xx/include/plat/s3c2412.h
index 3ec97685e781..bb15d3b68be5 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2412.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2412.h
@@ -14,7 +14,7 @@
 
 extern  int s3c2412_init(void);
 
-extern void s3c2412_map_io(struct map_desc *mach_desc, int size);
+extern void s3c2412_map_io(void);
 
 extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h
index 11d83b5c84e6..815b107ed890 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h
@@ -16,7 +16,7 @@ struct s3c2410_uartcfg;
 
 extern  int s3c2443_init(void);
 
-extern void s3c2443_map_io(struct map_desc *mach_desc, int size);
+extern void s3c2443_map_io(void);
 
 extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index 963f7a4f26f2..0192ecdc1442 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -62,6 +62,7 @@
 
 #include <asm/mach/irq.h>
 
+#include <plat/regs-irqtype.h>
 #include <mach/regs-irq.h>
 #include <mach/regs-gpio.h>
 
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index 8efb57ad5019..34ef18e5b2a1 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -33,7 +33,6 @@
 #include <linux/interrupt.h>
 #include <linux/crc32.h>
 #include <linux/ioport.h>
-#include <linux/delay.h>
 #include <linux/serial_core.h>
 #include <linux/io.h>
 
@@ -76,11 +75,13 @@ static struct sleep_save core_save[] = {
         SAVE_ITEM(S3C2410_BANKCON4),
         SAVE_ITEM(S3C2410_BANKCON5),
 
+#ifndef CONFIG_CPU_FREQ
         SAVE_ITEM(S3C2410_CLKDIVN),
         SAVE_ITEM(S3C2410_MPLLCON),
+        SAVE_ITEM(S3C2410_REFRESH),
+#endif
         SAVE_ITEM(S3C2410_UPLLCON),
         SAVE_ITEM(S3C2410_CLKSLOW),
-        SAVE_ITEM(S3C2410_REFRESH),
 };
 
 static struct gpio_sleep {
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/plat-s3c24xx/s3c2410-clock.c
index 4e07943c1e29..b61bdb793734 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2410-clock.c
@@ -272,5 +272,6 @@ int __init s3c2410_baseclk_add(void)
                (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
                (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
 
+        s3c_pwmclk_init();
         return 0;
 }
diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c
index 7c09773ff9fc..dde41f171aff 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c
@@ -31,7 +31,6 @@
 #include <linux/sysdev.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
-#include <linux/mutex.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 
@@ -102,13 +101,13 @@ static int s3c244x_clk_add(struct sys_device *sysdev)
         if (clk_get_rate(clock_upll) > (94 * MHZ)) {
                 clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
 
-                mutex_lock(&clocks_mutex);
+                spin_lock(&clocks_lock);
 
                 clkdivn = __raw_readl(S3C2410_CLKDIVN);
                 clkdivn |= S3C2440_CLKDIVN_UCLK;
                 __raw_writel(clkdivn, S3C2410_CLKDIVN);
 
-                mutex_unlock(&clocks_mutex);
+                spin_unlock(&clocks_lock);
         }
 
         return 0;
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
index c0344fac4a94..c1de6bb0101b 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/plat-s3c24xx/s3c244x.c
@@ -29,6 +29,8 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 
+#include <plat/cpu-freq.h>
+
 #include <mach/regs-clock.h>
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
@@ -42,6 +44,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/pm.h>
+#include <plat/pll.h>
 
 static struct map_desc s3c244x_iodesc[] __initdata = {
         IODESC_ENT(CLKPWR),
@@ -56,32 +59,34 @@ void __init s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no)
         s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
 }
 
-void __init s3c244x_map_io(struct map_desc *mach_desc, int size)
+void __init s3c244x_map_io(void)
 {
         /* register our io-tables */
 
         iotable_init(s3c244x_iodesc, ARRAY_SIZE(s3c244x_iodesc));
-        iotable_init(mach_desc, size);
 
         /* rename any peripherals used differing from the s3c2410 */
 
         s3c_device_sdi.name  = "s3c2440-sdi";
-        s3c_device_i2c.name  = "s3c2440-i2c";
+        s3c_device_i2c0.name  = "s3c2440-i2c";
         s3c_device_nand.name = "s3c2440-nand";
         s3c_device_usbgadget.name = "s3c2440-usbgadget";
 }
 
-void __init s3c244x_init_clocks(int xtal)
+void __init_or_cpufreq s3c244x_setup_clocks(void)
 {
+        struct clk *xtal_clk;
         unsigned long clkdiv;
         unsigned long camdiv;
+        unsigned long xtal;
         unsigned long hclk, fclk, pclk;
         int hdiv = 1;
 
-        /* now we've got our machine bits initialised, work out what
-         * clocks we've got */
+        xtal_clk = clk_get(NULL, "xtal");
+        xtal = clk_get_rate(xtal_clk);
+        clk_put(xtal_clk);
 
-        fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2;
+        fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2;
 
         clkdiv = __raw_readl(S3C2410_CLKDIVN);
         camdiv = __raw_readl(S3C2440_CAMDIVN);
@@ -107,18 +112,24 @@ void __init s3c244x_init_clocks(int xtal)
         }
 
         hclk = fclk / hdiv;
-        pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN)? 2:1);
+        pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1);
 
         /* print brief summary of clocks, etc */
 
         printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
                print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
 
+        s3c24xx_setup_clocks(fclk, hclk, pclk);
+}
+
+void __init s3c244x_init_clocks(int xtal)
+{
         /* initialise the clocks here, to allow other things like the
          * console to use them, and to add new ones after the initialisation
          */
 
-        s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
+        s3c24xx_register_baseclocks(xtal);
+        s3c244x_setup_clocks();
         s3c2410_baseclk_add();
 }
 
diff --git a/arch/arm/plat-s3c24xx/s3c244x.h b/arch/arm/plat-s3c24xx/s3c244x.h
index f8ed17676a35..6aab5eaae2b4 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.h
+++ b/arch/arm/plat-s3c24xx/s3c244x.h
@@ -12,7 +12,7 @@
 
 #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
 
-extern void s3c244x_map_io(struct map_desc *mach_desc, int size);
+extern void s3c244x_map_io(void);
 
 extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 
diff --git a/arch/arm/plat-s3c24xx/setup-i2c.c b/arch/arm/plat-s3c24xx/setup-i2c.c
new file mode 100644
index 000000000000..d62b7e7fb355
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/setup-i2c.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/plat-s3c24xx/setup-i2c.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX Base setup for i2c device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+
+struct platform_device;
+
+#include <plat/iic.h>
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+        s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_IICSDA);
+        s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_IICSCL);
+}
diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
new file mode 100644
index 000000000000..8b403cbb53d2
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
@@ -0,0 +1,37 @@
+/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX SPI - gpio configuration for bus 0 on gpe11,12,13
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/kernel.h>
+
+#include <mach/hardware.h>
+
+#include <mach/spi.h>
+#include <mach/regs-gpio.h>
+
+void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
+                                          int enable)
+{
+        if (enable) {
+                s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPE13_SPICLK0);
+                s3c2410_gpio_cfgpin(S3C2410_GPE12, S3C2410_GPE12_SPIMOSI0);
+                s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPE11_SPIMISO0);
+                s3c2410_gpio_pullup(S3C2410_GPE11, 0);
+                s3c2410_gpio_pullup(S3C2410_GPE13, 0);
+        } else {
+                s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPIO_INPUT);
+                s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPIO_INPUT);
+                s3c2410_gpio_pullup(S3C2410_GPE11, 1);
+                s3c2410_gpio_pullup(S3C2410_GPE12, 1);
+                s3c2410_gpio_pullup(S3C2410_GPE13, 1);
+        }
+}
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
new file mode 100644
index 000000000000..8fccd4e549f0
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
@@ -0,0 +1,37 @@
+/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpg5_6_7.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX SPI - gpio configuration for bus 1 on gpg5,6,7
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/kernel.h>
+
+#include <mach/hardware.h>
+
+#include <mach/spi.h>
+#include <mach/regs-gpio.h>
+
+void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
+                                       int enable)
+{
+        if (enable) {
+                s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPG7_SPICLK1);
+                s3c2410_gpio_cfgpin(S3C2410_GPG6, S3C2410_GPG6_SPIMOSI1);
+                s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPG5_SPIMISO1);
+                s3c2410_gpio_pullup(S3C2410_GPG5, 0);
+                s3c2410_gpio_pullup(S3C2410_GPG6, 0);
+        } else {
+                s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPIO_INPUT);
+                s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPIO_INPUT);
+                s3c2410_gpio_pullup(S3C2410_GPG5, 1);
+                s3c2410_gpio_pullup(S3C2410_GPG6, 1);
+                s3c2410_gpio_pullup(S3C2410_GPG7, 1);
+        }
+}
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
new file mode 100644
index 000000000000..54375a00a7d2
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/Kconfig
@@ -0,0 +1,62 @@
+# arch/arm/plat-s3c64xx/Kconfig
+#
+# Copyright 2008 Openmoko, Inc.
+# Copyright 2008 Simtec Electronics
+#       Ben Dooks <ben@simtec.co.uk>
+#
+# Licensed under GPLv2
+
+config PLAT_S3C64XX
+        bool
+        depends on ARCH_S3C64XX
+        default y
+        select CPU_V6
+        select PLAT_S3C
+        select ARM_VIC
+        select NO_IOPORT
+        select ARCH_REQUIRE_GPIOLIB
+        select S3C_GPIO_TRACK
+        select S3C_GPIO_PULL_UPDOWN
+        select S3C_GPIO_CFG_S3C24XX
+        select S3C_GPIO_CFG_S3C64XX
+        help
+          Base platform code for any Samsung S3C64XX device
+
+if PLAT_S3C64XX
+
+# Configuration options shared by all S3C64XX implementations
+
+config CPU_S3C6400_INIT
+        bool
+        help
+          Common initialisation code for the S3C6400 that is shared
+          by other CPUs in the series, such as the S3C6410.
+
+config CPU_S3C6400_CLOCK
+        bool
+        help
+          Common clock support code for the S3C6400 that is shared
+          by other CPUs in the series, such as the S3C6410.
+
+# platform specific device setup
+
+config S3C64XX_SETUP_I2C0
+        bool
+        default y
+        help
+          Common setup code for i2c bus 0.
+
+          Note, currently since i2c0 is always compiled, this setup helper
+          is always compiled with it.
+
+config S3C64XX_SETUP_I2C1
+        bool
+        help
+          Common setup code for i2c bus 1.
+
+config S3C64XX_SETUP_FB_24BPP
+        bool
+        help
+          Common setup code for S3C64XX with an 24bpp RGB display helper.
+
+endif
diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile
new file mode 100644
index 000000000000..2e6d79bf8f33
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/Makefile
@@ -0,0 +1,31 @@
+# arch/arm/plat-s3c64xx/Makefile
+#
+# Copyright 2008 Openmoko, Inc.
+# Copyright 2008 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y                           :=
+obj-m                           :=
+obj-n                           := dummy.o
+obj-                            :=
+
+# Core files
+
+obj-y                           += dev-uart.o
+obj-y                           += cpu.o
+obj-y                           += irq.o
+obj-y                           += irq-eint.o
+obj-y                           += clock.o
+obj-y                           += gpiolib.o
+
+# CPU support
+
+obj-$(CONFIG_CPU_S3C6400_INIT)  += s3c6400-init.o
+obj-$(CONFIG_CPU_S3C6400_CLOCK) += s3c6400-clock.o
+
+# Device setup
+
+obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
+obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
diff --git a/arch/arm/plat-s3c64xx/clock.c b/arch/arm/plat-s3c64xx/clock.c
new file mode 100644
index 000000000000..136c982c68e1
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/clock.c
@@ -0,0 +1,281 @@
+/* linux/arch/arm/plat-s3c64xx/clock.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX Base clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/regs-sys.h>
+#include <plat/regs-clock.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+
+struct clk clk_27m = {
+        .name           = "clk_27m",
+        .id             = -1,
+        .rate           = 27000000,
+};
+
+static int clk_48m_ctrl(struct clk *clk, int enable)
+{
+        unsigned long flags;
+        u32 val;
+
+        /* can't rely on clock lock, this register has other usages */
+        local_irq_save(flags);
+
+        val = __raw_readl(S3C64XX_OTHERS);
+        if (enable)
+                val |= S3C64XX_OTHERS_USBMASK;
+        else
+                val &= ~S3C64XX_OTHERS_USBMASK;
+
+        __raw_writel(val, S3C64XX_OTHERS);
+        local_irq_restore(flags);
+
+        return 0;
+}
+
+struct clk clk_48m = {
+        .name           = "clk_48m",
+        .id             = -1,
+        .rate           = 48000000,
+        .enable         = clk_48m_ctrl,
+};
+
+static int inline s3c64xx_gate(void __iomem *reg,
+                                struct clk *clk,
+                                int enable)
+{
+        unsigned int ctrlbit = clk->ctrlbit;
+        u32 con;
+
+        con = __raw_readl(reg);
+
+        if (enable)
+                con |= ctrlbit;
+        else
+                con &= ~ctrlbit;
+
+        __raw_writel(con, reg);
+        return 0;
+}
+
+static int s3c64xx_pclk_ctrl(struct clk *clk, int enable)
+{
+        return s3c64xx_gate(S3C_PCLK_GATE, clk, enable);
+}
+
+static int s3c64xx_hclk_ctrl(struct clk *clk, int enable)
+{
+        return s3c64xx_gate(S3C_HCLK_GATE, clk, enable);
+}
+
+int s3c64xx_sclk_ctrl(struct clk *clk, int enable)
+{
+        return s3c64xx_gate(S3C_SCLK_GATE, clk, enable);
+}
+
+static struct clk init_clocks_disable[] = {
+        {
+                .name           = "nand",
+                .id             = -1,
+                .parent         = &clk_h,
+        }, {
+                .name           = "adc",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s3c64xx_pclk_ctrl,
+                .ctrlbit        = S3C_CLKCON_PCLK_TSADC,
+        }, {
+                .name           = "i2c",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s3c64xx_pclk_ctrl,
+                .ctrlbit        = S3C_CLKCON_PCLK_IIC,
+        }, {
+                .name           = "iis",
+                .id             = 0,
+                .parent         = &clk_p,
+                .enable         = s3c64xx_pclk_ctrl,
+                .ctrlbit        = S3C_CLKCON_PCLK_IIS0,
+        }, {
+                .name           = "iis",
+                .id             = 1,
+                .parent         = &clk_p,
+                .enable         = s3c64xx_pclk_ctrl,
+                .ctrlbit        = S3C_CLKCON_PCLK_IIS1,
+        }, {
+                .name           = "spi",
+                .id             = 0,
+                .parent         = &clk_p,
+                .enable         = s3c64xx_pclk_ctrl,
+                .ctrlbit        = S3C_CLKCON_PCLK_SPI0,
+        }, {
+                .name           = "spi",
+                .id             = 1,
+                .parent         = &clk_p,
+                .enable         = s3c64xx_pclk_ctrl,
+                .ctrlbit        = S3C_CLKCON_PCLK_SPI1,
+        }, {
+                .name           = "48m",
+                .id             = 0,
+                .parent         = &clk_48m,
+                .enable         = s3c64xx_sclk_ctrl,
+                .ctrlbit        = S3C_CLKCON_SCLK_MMC0_48,
+        }, {
+                .name           = "48m",
+                .id             = 1,
+                .parent         = &clk_48m,
+                .enable         = s3c64xx_sclk_ctrl,
+                .ctrlbit        = S3C_CLKCON_SCLK_MMC1_48,
+        }, {
+                .name           = "48m",
+                .id             = 2,
+                .parent         = &clk_48m,
+                .enable         = s3c64xx_sclk_ctrl,
+                .ctrlbit        = S3C_CLKCON_SCLK_MMC2_48,
+        },
+};
+
+static struct clk init_clocks[] = {
+        {
+                .name           = "lcd",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s3c64xx_hclk_ctrl,
+                .ctrlbit        = S3C_CLKCON_HCLK_LCD,
+        }, {
+                .name           = "gpio",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s3c64xx_pclk_ctrl,
+                .ctrlbit        = S3C_CLKCON_PCLK_GPIO,
+        }, {
+                .name           = "usb-host",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s3c64xx_hclk_ctrl,
+                .ctrlbit        = S3C_CLKCON_SCLK_UHOST,
+        }, {
+                .name           = "hsmmc",
+                .id             = 0,
+                .parent         = &clk_h,
+                .enable         = s3c64xx_hclk_ctrl,
+                .ctrlbit        = S3C_CLKCON_HCLK_HSMMC0,
+        }, {
+                .name           = "hsmmc",
+                .id             = 1,
+                .parent         = &clk_h,
+                .enable         = s3c64xx_hclk_ctrl,
+                .ctrlbit        = S3C_CLKCON_HCLK_HSMMC1,
+        }, {
+                .name           = "hsmmc",
+                .id             = 2,
+                .parent         = &clk_h,
+                .enable         = s3c64xx_hclk_ctrl,
+                .ctrlbit        = S3C_CLKCON_HCLK_HSMMC2,
+        }, {
+                .name           = "timers",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s3c64xx_pclk_ctrl,
+                .ctrlbit        = S3C_CLKCON_PCLK_PWM,
+        }, {
+                .name           = "uart",
+                .id             = 0,
+                .parent         = &clk_p,
+                .enable         = s3c64xx_pclk_ctrl,
+                .ctrlbit        = S3C_CLKCON_PCLK_UART0,
+        }, {
+                .name           = "uart",
+                .id             = 1,
+                .parent         = &clk_p,
+                .enable         = s3c64xx_pclk_ctrl,
+                .ctrlbit        = S3C_CLKCON_PCLK_UART1,
+        }, {
+                .name           = "uart",
+                .id             = 2,
+                .parent         = &clk_p,
+                .enable         = s3c64xx_pclk_ctrl,
+                .ctrlbit        = S3C_CLKCON_PCLK_UART2,
+        }, {
+                .name           = "uart",
+                .id             = 3,
+                .parent         = &clk_p,
+                .enable         = s3c64xx_pclk_ctrl,
+                .ctrlbit        = S3C_CLKCON_PCLK_UART3,
+        }, {
+                .name           = "rtc",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s3c64xx_pclk_ctrl,
+                .ctrlbit        = S3C_CLKCON_PCLK_RTC,
+        }, {
+                .name           = "watchdog",
+                .id             = -1,
+                .parent         = &clk_p,
+                .ctrlbit        = S3C_CLKCON_PCLK_WDT,
+        }, {
+                .name           = "ac97",
+                .id             = -1,
+                .parent         = &clk_p,
+                .ctrlbit        = S3C_CLKCON_PCLK_AC97,
+        }
+};
+
+static struct clk *clks[] __initdata = {
+        &clk_ext,
+        &clk_epll,
+        &clk_27m,
+        &clk_48m,
+};
+
+void s3c64xx_register_clocks(void)
+{
+        struct clk *clkp;
+        int ret;
+        int ptr;
+
+        s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+        clkp = init_clocks;
+        for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
+                ret = s3c24xx_register_clock(clkp);
+                if (ret < 0) {
+                        printk(KERN_ERR "Failed to register clock %s (%d)\n",
+                               clkp->name, ret);
+                }
+        }
+
+        clkp = init_clocks_disable;
+        for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+                ret = s3c24xx_register_clock(clkp);
+                if (ret < 0) {
+                        printk(KERN_ERR "Failed to register clock %s (%d)\n",
+                               clkp->name, ret);
+                }
+
+                (clkp->enable)(clkp, 0);
+        }
+
+        s3c_pwmclk_init();
+}
diff --git a/arch/arm/plat-s3c64xx/cpu.c b/arch/arm/plat-s3c64xx/cpu.c
new file mode 100644
index 000000000000..fbde183a4560
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/cpu.c
@@ -0,0 +1,114 @@
+/* linux/arch/arm/plat-s3c64xx/cpu.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX CPU Support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+
+#include <plat/s3c6400.h>
+#include <plat/s3c6410.h>
+
+/* table of supported CPUs */
+
+static const char name_s3c6400[] = "S3C6400";
+static const char name_s3c6410[] = "S3C6410";
+
+static struct cpu_table cpu_ids[] __initdata = {
+        {
+                .idcode         = 0x36400000,
+                .idmask         = 0xfffff000,
+                .map_io         = s3c6400_map_io,
+                .init_clocks    = s3c6400_init_clocks,
+                .init_uarts     = s3c6400_init_uarts,
+                .init           = s3c6400_init,
+                .name           = name_s3c6400,
+        }, {
+                .idcode         = 0x36410100,
+                .idmask         = 0xffffff00,
+                .map_io         = s3c6410_map_io,
+                .init_clocks    = s3c6410_init_clocks,
+                .init_uarts     = s3c6410_init_uarts,
+                .init           = s3c6410_init,
+                .name           = name_s3c6410,
+        },
+};
+
+/* minimal IO mapping */
+
+/* see notes on uart map in arch/arm/mach-s3c6400/include/mach/debug-macro.S */
+#define UART_OFFS (S3C_PA_UART & 0xfffff)
+
+static struct map_desc s3c_iodesc[] __initdata = {
+        {
+                .virtual        = (unsigned long)S3C_VA_SYS,
+                .pfn            = __phys_to_pfn(S3C64XX_PA_SYSCON),
+                .length         = SZ_4K,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = (unsigned long)(S3C_VA_UART + UART_OFFS),
+                .pfn            = __phys_to_pfn(S3C_PA_UART),
+                .length         = SZ_4K,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = (unsigned long)S3C_VA_VIC0,
+                .pfn            = __phys_to_pfn(S3C64XX_PA_VIC0),
+                .length         = SZ_16K,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = (unsigned long)S3C_VA_VIC1,
+                .pfn            = __phys_to_pfn(S3C64XX_PA_VIC1),
+                .length         = SZ_16K,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = (unsigned long)S3C_VA_TIMER,
+                .pfn            = __phys_to_pfn(S3C_PA_TIMER),
+                .length         = SZ_16K,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = (unsigned long)S3C64XX_VA_GPIO,
+                .pfn            = __phys_to_pfn(S3C64XX_PA_GPIO),
+                .length         = SZ_4K,
+                .type           = MT_DEVICE,
+        },
+};
+
+/* read cpu identification code */
+
+void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
+{
+        unsigned long idcode;
+
+        /* initialise the io descriptors we need for initialisation */
+        iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
+        iotable_init(mach_desc, size);
+
+        idcode = __raw_readl(S3C_VA_SYS + 0x118);
+        s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
diff --git a/arch/arm/plat-s3c64xx/dev-uart.c b/arch/arm/plat-s3c64xx/dev-uart.c
new file mode 100644
index 000000000000..62c11a6fc7ba
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/dev-uart.c
@@ -0,0 +1,176 @@
+/* linux/arch/arm/plat-s3c64xx/dev-uart.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * Base S3C64XX UART resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+/* Serial port registrations */
+
+/* 64xx uarts are closer together */
+
+static struct resource s3c64xx_uart0_resource[] = {
+        [0] = {
+                .start  = S3C_PA_UART0,
+                .end    = S3C_PA_UART0 + 0x100,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = IRQ_S3CUART_RX0,
+                .end    = IRQ_S3CUART_RX0,
+                .flags  = IORESOURCE_IRQ,
+        },
+        [2] = {
+                .start  = IRQ_S3CUART_TX0,
+                .end    = IRQ_S3CUART_TX0,
+                .flags  = IORESOURCE_IRQ,
+
+        },
+        [3] = {
+                .start  = IRQ_S3CUART_ERR0,
+                .end    = IRQ_S3CUART_ERR0,
+                .flags  = IORESOURCE_IRQ,
+        }
+};
+
+static struct resource s3c64xx_uart1_resource[] = {
+        [0] = {
+                .start = S3C_PA_UART1,
+                .end   = S3C_PA_UART1 + 0x100,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = IRQ_S3CUART_RX1,
+                .end    = IRQ_S3CUART_RX1,
+                .flags  = IORESOURCE_IRQ,
+        },
+        [2] = {
+                .start  = IRQ_S3CUART_TX1,
+                .end    = IRQ_S3CUART_TX1,
+                .flags  = IORESOURCE_IRQ,
+
+        },
+        [3] = {
+                .start  = IRQ_S3CUART_ERR1,
+                .end    = IRQ_S3CUART_ERR1,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct resource s3c6xx_uart2_resource[] = {
+        [0] = {
+                .start = S3C_PA_UART2,
+                .end   = S3C_PA_UART2 + 0x100,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = IRQ_S3CUART_RX2,
+                .end    = IRQ_S3CUART_RX2,
+                .flags  = IORESOURCE_IRQ,
+        },
+        [2] = {
+                .start  = IRQ_S3CUART_TX2,
+                .end    = IRQ_S3CUART_TX2,
+                .flags  = IORESOURCE_IRQ,
+
+        },
+        [3] = {
+                .start  = IRQ_S3CUART_ERR2,
+                .end    = IRQ_S3CUART_ERR2,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct resource s3c64xx_uart3_resource[] = {
+        [0] = {
+                .start = S3C_PA_UART3,
+                .end   = S3C_PA_UART3 + 0x100,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = IRQ_S3CUART_RX3,
+                .end    = IRQ_S3CUART_RX3,
+                .flags  = IORESOURCE_IRQ,
+        },
+        [2] = {
+                .start  = IRQ_S3CUART_TX3,
+                .end    = IRQ_S3CUART_TX3,
+                .flags  = IORESOURCE_IRQ,
+
+        },
+        [3] = {
+                .start  = IRQ_S3CUART_ERR3,
+                .end    = IRQ_S3CUART_ERR3,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+
+struct s3c24xx_uart_resources s3c64xx_uart_resources[] __initdata = {
+        [0] = {
+                .resources      = s3c64xx_uart0_resource,
+                .nr_resources   = ARRAY_SIZE(s3c64xx_uart0_resource),
+        },
+        [1] = {
+                .resources      = s3c64xx_uart1_resource,
+                .nr_resources   = ARRAY_SIZE(s3c64xx_uart1_resource),
+        },
+        [2] = {
+                .resources      = s3c6xx_uart2_resource,
+                .nr_resources   = ARRAY_SIZE(s3c6xx_uart2_resource),
+        },
+        [3] = {
+                .resources      = s3c64xx_uart3_resource,
+                .nr_resources   = ARRAY_SIZE(s3c64xx_uart3_resource),
+        },
+};
+
+/* uart devices */
+
+static struct platform_device s3c24xx_uart_device0 = {
+        .id             = 0,
+};
+
+static struct platform_device s3c24xx_uart_device1 = {
+        .id             = 1,
+};
+
+static struct platform_device s3c24xx_uart_device2 = {
+        .id             = 2,
+};
+
+static struct platform_device s3c24xx_uart_device3 = {
+        .id             = 3,
+};
+
+struct platform_device *s3c24xx_uart_src[4] = {
+        &s3c24xx_uart_device0,
+        &s3c24xx_uart_device1,
+        &s3c24xx_uart_device2,
+        &s3c24xx_uart_device3,
+};
+
+struct platform_device *s3c24xx_uart_devs[4] = {
+};
+
diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c
new file mode 100644
index 000000000000..cc62941d7b5c
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/gpiolib.c
@@ -0,0 +1,420 @@
+/* arch/arm/plat-s3c64xx/gpiolib.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - GPIOlib support 
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/gpio.h>
+#include <mach/gpio-core.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <plat/regs-gpio.h>
+
+/* GPIO bank summary:
+ *
+ * Bank GPIOs   Style   SlpCon  ExtInt Group
+ * A    8       4Bit    Yes     1
+ * B    7       4Bit    Yes     1
+ * C    8       4Bit    Yes     2
+ * D    5       4Bit    Yes     3
+ * E    5       4Bit    Yes     None
+ * F    16      2Bit    Yes     4 [1]
+ * G    7       4Bit    Yes     5
+ * H    10      4Bit[2] Yes     6
+ * I    16      2Bit    Yes     None
+ * J    12      2Bit    Yes     None
+ * K    16      4Bit[2] No      None
+ * L    15      4Bit[2] No      None
+ * M    6       4Bit    No      IRQ_EINT
+ * N    16      2Bit    No      IRQ_EINT
+ * O    16      2Bit    Yes     7
+ * P    15      2Bit    Yes     8
+ * Q    9       2Bit    Yes     9
+ *
+ * [1] BANKF pins 14,15 do not form part of the external interrupt sources
+ * [2] BANK has two control registers, GPxCON0 and GPxCON1
+ */
+
+#define OFF_GPCON       (0x00)
+#define OFF_GPDAT       (0x04)
+
+#define con_4bit_shift(__off) ((__off) * 4)
+
+#if 1
+#define gpio_dbg(x...) do { } while(0)
+#else
+#define gpio_dbg(x...) printk(KERN_DEBUG ## x)
+#endif
+
+/* The s3c64xx_gpiolib_4bit routines are to control the gpio banks where
+ * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
+ * following example:
+ *
+ * base + 0x00: Control register, 4 bits per gpio
+ *              gpio n: 4 bits starting at (4*n)
+ *              0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ *              bit n: data bit n
+ *
+ * Note, since the data register is one bit per gpio and is at base + 0x4
+ * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
+ * the output.
+*/
+
+static int s3c64xx_gpiolib_4bit_input(struct gpio_chip *chip, unsigned offset)
+{
+        struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+        void __iomem *base = ourchip->base;
+        unsigned long con;
+
+        con = __raw_readl(base + OFF_GPCON);
+        con &= ~(0xf << con_4bit_shift(offset));
+        __raw_writel(con, base + OFF_GPCON);
+
+        gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
+
+        return 0;
+}
+
+static int s3c64xx_gpiolib_4bit_output(struct gpio_chip *chip,
+                                       unsigned offset, int value)
+{
+        struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+        void __iomem *base = ourchip->base;
+        unsigned long con;
+        unsigned long dat;
+
+        con = __raw_readl(base + OFF_GPCON);
+        con &= ~(0xf << con_4bit_shift(offset));
+        con |= 0x1 << con_4bit_shift(offset);
+
+        dat = __raw_readl(base + OFF_GPDAT);
+        if (value)
+                dat |= 1 << offset;
+        else
+                dat &= ~(1 << offset);
+
+        __raw_writel(dat, base + OFF_GPDAT);
+        __raw_writel(con, base + OFF_GPCON);
+        __raw_writel(dat, base + OFF_GPDAT);
+
+        gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+        return 0;
+}
+
+/* The next set of routines are for the case where the GPIO configuration
+ * registers are 4 bits per GPIO but there is more than one register (the
+ * bank has more than 8 GPIOs.
+ *
+ * This case is the similar to the 4 bit case, but the registers are as
+ * follows:
+ *
+ * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
+ *              gpio n: 4 bits starting at (4*n)
+ *              0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
+ *              gpio n: 4 bits starting at (4*n)
+ *              0000 = input, 0001 = output, others mean special-function
+ * base + 0x08: Data register, 1 bit per gpio
+ *              bit n: data bit n
+ *
+ * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we
+ * store the 'base + 0x4' address so that these routines see the data
+ * register at ourchip->base + 0x04.
+*/
+
+static int s3c64xx_gpiolib_4bit2_input(struct gpio_chip *chip, unsigned offset)
+{
+        struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+        void __iomem *base = ourchip->base;
+        void __iomem *regcon = base;
+        unsigned long con;
+
+        if (offset > 7)
+                offset -= 8;
+        else
+                regcon -= 4;
+
+        con = __raw_readl(regcon);
+        con &= ~(0xf << con_4bit_shift(offset));
+        __raw_writel(con, regcon);
+
+        gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
+
+        return 0;
+
+}
+
+static int s3c64xx_gpiolib_4bit2_output(struct gpio_chip *chip,
+                                       unsigned offset, int value)
+{
+        struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+        void __iomem *base = ourchip->base;
+        void __iomem *regcon = base;
+        unsigned long con;
+        unsigned long dat;
+
+        if (offset > 7)
+                offset -= 8;
+        else
+                regcon -= 4;
+
+        con = __raw_readl(regcon);
+        con &= ~(0xf << con_4bit_shift(offset));
+        con |= 0x1 << con_4bit_shift(offset);
+
+        dat = __raw_readl(base + OFF_GPDAT);
+        if (value)
+                dat |= 1 << offset;
+        else
+                dat &= ~(1 << offset);
+
+        __raw_writel(dat, base + OFF_GPDAT);
+        __raw_writel(con, regcon);
+        __raw_writel(dat, base + OFF_GPDAT);
+
+        gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+        return 0;
+}
+
+static struct s3c_gpio_cfg gpio_4bit_cfg_noint = {
+        .set_config     = s3c_gpio_setcfg_s3c64xx_4bit,
+        .set_pull       = s3c_gpio_setpull_updown,
+        .get_pull       = s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = {
+        .cfg_eint       = 7,
+        .set_config     = s3c_gpio_setcfg_s3c64xx_4bit,
+        .set_pull       = s3c_gpio_setpull_updown,
+        .get_pull       = s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = {
+        .cfg_eint       = 3,
+        .set_config     = s3c_gpio_setcfg_s3c64xx_4bit,
+        .set_pull       = s3c_gpio_setpull_updown,
+        .get_pull       = s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_chip gpio_4bit[] = {
+        {
+                .base   = S3C64XX_GPA_BASE,
+                .config = &gpio_4bit_cfg_eint0111,
+                .chip   = {
+                        .base   = S3C64XX_GPA(0),
+                        .ngpio  = S3C64XX_GPIO_A_NR,
+                        .label  = "GPA",
+                },
+        }, {
+                .base   = S3C64XX_GPB_BASE,
+                .config = &gpio_4bit_cfg_eint0111,
+                .chip   = {
+                        .base   = S3C64XX_GPB(0),
+                        .ngpio  = S3C64XX_GPIO_B_NR,
+                        .label  = "GPB",
+                },
+        }, {
+                .base   = S3C64XX_GPC_BASE,
+                .config = &gpio_4bit_cfg_eint0111,
+                .chip   = {
+                        .base   = S3C64XX_GPC(0),
+                        .ngpio  = S3C64XX_GPIO_C_NR,
+                        .label  = "GPC",
+                },
+        }, {
+                .base   = S3C64XX_GPD_BASE,
+                .config = &gpio_4bit_cfg_eint0111,
+                .chip   = {
+                        .base   = S3C64XX_GPD(0),
+                        .ngpio  = S3C64XX_GPIO_D_NR,
+                        .label  = "GPD",
+                },
+        }, {
+                .base   = S3C64XX_GPE_BASE,
+                .config = &gpio_4bit_cfg_noint,
+                .chip   = {
+                        .base   = S3C64XX_GPE(0),
+                        .ngpio  = S3C64XX_GPIO_E_NR,
+                        .label  = "GPE",
+                },
+        }, {
+                .base   = S3C64XX_GPG_BASE,
+                .config = &gpio_4bit_cfg_eint0111,
+                .chip   = {
+                        .base   = S3C64XX_GPG(0),
+                        .ngpio  = S3C64XX_GPIO_G_NR,
+                        .label  = "GPG",
+                },
+        }, {
+                .base   = S3C64XX_GPM_BASE,
+                .config = &gpio_4bit_cfg_eint0011,
+                .chip   = {
+                        .base   = S3C64XX_GPM(0),
+                        .ngpio  = S3C64XX_GPIO_M_NR,
+                        .label  = "GPM",
+                },
+        },
+};
+
+static struct s3c_gpio_chip gpio_4bit2[] = {
+        {
+                .base   = S3C64XX_GPH_BASE + 0x4,
+                .config = &gpio_4bit_cfg_eint0111,
+                .chip   = {
+                        .base   = S3C64XX_GPH(0),
+                        .ngpio  = S3C64XX_GPIO_H_NR,
+                        .label  = "GPH",
+                },
+        }, {
+                .base   = S3C64XX_GPK_BASE + 0x4,
+                .config = &gpio_4bit_cfg_noint,
+                .chip   = {
+                        .base   = S3C64XX_GPK(0),
+                        .ngpio  = S3C64XX_GPIO_K_NR,
+                        .label  = "GPK",
+                },
+        }, {
+                .base   = S3C64XX_GPL_BASE + 0x4,
+                .config = &gpio_4bit_cfg_eint0011,
+                .chip   = {
+                        .base   = S3C64XX_GPL(0),
+                        .ngpio  = S3C64XX_GPIO_L_NR,
+                        .label  = "GPL",
+                },
+        },
+};
+
+static struct s3c_gpio_cfg gpio_2bit_cfg_noint = {
+        .set_config     = s3c_gpio_setcfg_s3c24xx,
+        .set_pull       = s3c_gpio_setpull_updown,
+        .get_pull       = s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = {
+        .cfg_eint       = 2,
+        .set_config     = s3c_gpio_setcfg_s3c24xx,
+        .set_pull       = s3c_gpio_setpull_updown,
+        .get_pull       = s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = {
+        .cfg_eint       = 3,
+        .set_config     = s3c_gpio_setcfg_s3c24xx,
+        .set_pull       = s3c_gpio_setpull_updown,
+        .get_pull       = s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_chip gpio_2bit[] = {
+        {
+                .base   = S3C64XX_GPF_BASE,
+                .config = &gpio_2bit_cfg_eint11,
+                .chip   = {
+                        .base   = S3C64XX_GPF(0),
+                        .ngpio  = S3C64XX_GPIO_F_NR,
+                        .label  = "GPF",
+                },
+        }, {
+                .base   = S3C64XX_GPI_BASE,
+                .config = &gpio_2bit_cfg_noint,
+                .chip   = {
+                        .base   = S3C64XX_GPI(0),
+                        .ngpio  = S3C64XX_GPIO_I_NR,
+                        .label  = "GPI",
+                },
+        }, {
+                .base   = S3C64XX_GPJ_BASE,
+                .config = &gpio_2bit_cfg_noint,
+                .chip   = {
+                        .base   = S3C64XX_GPJ(0),
+                        .ngpio  = S3C64XX_GPIO_J_NR,
+                        .label  = "GPJ",
+                },
+        }, {
+                .base   = S3C64XX_GPN_BASE,
+                .config = &gpio_2bit_cfg_eint10,
+                .chip   = {
+                        .base   = S3C64XX_GPN(0),
+                        .ngpio  = S3C64XX_GPIO_N_NR,
+                        .label  = "GPN",
+                },
+        }, {
+                .base   = S3C64XX_GPO_BASE,
+                .config = &gpio_2bit_cfg_eint11,
+                .chip   = {
+                        .base   = S3C64XX_GPO(0),
+                        .ngpio  = S3C64XX_GPIO_O_NR,
+                        .label  = "GPO",
+                },
+        }, {
+                .base   = S3C64XX_GPP_BASE,
+                .config = &gpio_2bit_cfg_eint11,
+                .chip   = {
+                        .base   = S3C64XX_GPP(0),
+                        .ngpio  = S3C64XX_GPIO_P_NR,
+                        .label  = "GPP",
+                },
+        }, {
+                .base   = S3C64XX_GPQ_BASE,
+                .config = &gpio_2bit_cfg_eint11,
+                .chip   = {
+                        .base   = S3C64XX_GPQ(0),
+                        .ngpio  = S3C64XX_GPIO_Q_NR,
+                        .label  = "GPQ",
+                },
+        },
+};
+
+static __init void s3c64xx_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
+{
+        chip->chip.direction_input = s3c64xx_gpiolib_4bit_input;
+        chip->chip.direction_output = s3c64xx_gpiolib_4bit_output;
+}
+
+static __init void s3c64xx_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
+{
+        chip->chip.direction_input = s3c64xx_gpiolib_4bit2_input;
+        chip->chip.direction_output = s3c64xx_gpiolib_4bit2_output;
+}
+
+static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
+                                       int nr_chips,
+                                       void (*fn)(struct s3c_gpio_chip *))
+{
+        for (; nr_chips > 0; nr_chips--, chips++) {
+                if (fn)
+                        (fn)(chips);
+                s3c_gpiolib_add(chips);
+        }
+}
+
+static __init int s3c64xx_gpiolib_init(void)
+{
+        s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit),
+                            s3c64xx_gpiolib_add_4bit);
+
+        s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
+                            s3c64xx_gpiolib_add_4bit2);
+
+        s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit), NULL);
+
+        return 0;
+}
+
+arch_initcall(s3c64xx_gpiolib_init);
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h
new file mode 100644
index 000000000000..9aa0e427d113
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h
@@ -0,0 +1,48 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank A register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPACON                  (S3C64XX_GPA_BASE + 0x00)
+#define S3C64XX_GPADAT                  (S3C64XX_GPA_BASE + 0x04)
+#define S3C64XX_GPAPUD                  (S3C64XX_GPA_BASE + 0x08)
+#define S3C64XX_GPACONSLP               (S3C64XX_GPA_BASE + 0x0c)
+#define S3C64XX_GPAPUDSLP               (S3C64XX_GPA_BASE + 0x10)
+
+#define S3C64XX_GPA_CONMASK(__gpio)     (0xf << ((__gpio) * 4))
+#define S3C64XX_GPA_INPUT(__gpio)       (0x0 << ((__gpio) * 4))
+#define S3C64XX_GPA_OUTPUT(__gpio)      (0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPA0_UART_RXD0          (0x02 << 0)
+#define S3C64XX_GPA0_EINT_G1_0          (0x07 << 0)
+
+#define S3C64XX_GPA1_UART_TXD0          (0x02 << 4)
+#define S3C64XX_GPA1_EINT_G1_1          (0x07 << 4)
+
+#define S3C64XX_GPA2_UART_nCTS0         (0x02 << 8)
+#define S3C64XX_GPA2_EINT_G1_2          (0x07 << 8)
+
+#define S3C64XX_GPA3_UART_nRTS0         (0x02 << 12)
+#define S3C64XX_GPA3_EINT_G1_3          (0x07 << 12)
+
+#define S3C64XX_GPA4_UART_RXD1          (0x02 << 16)
+#define S3C64XX_GPA4_EINT_G1_4          (0x07 << 16)
+
+#define S3C64XX_GPA5_UART_TXD1          (0x02 << 20)
+#define S3C64XX_GPA5_EINT_G1_5          (0x07 << 20)
+
+#define S3C64XX_GPA6_UART_nCTS1         (0x02 << 24)
+#define S3C64XX_GPA6_EINT_G1_6          (0x07 << 24)
+
+#define S3C64XX_GPA7_UART_nRTS1         (0x02 << 28)
+#define S3C64XX_GPA7_EINT_G1_7          (0x07 << 28)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h
new file mode 100644
index 000000000000..3933adb4d50a
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h
@@ -0,0 +1,60 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank B register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPBCON                  (S3C64XX_GPB_BASE + 0x00)
+#define S3C64XX_GPBDAT                  (S3C64XX_GPB_BASE + 0x04)
+#define S3C64XX_GPBPUD                  (S3C64XX_GPB_BASE + 0x08)
+#define S3C64XX_GPBCONSLP               (S3C64XX_GPB_BASE + 0x0c)
+#define S3C64XX_GPBPUDSLP               (S3C64XX_GPB_BASE + 0x10)
+
+#define S3C64XX_GPB_CONMASK(__gpio)     (0xf << ((__gpio) * 4))
+#define S3C64XX_GPB_INPUT(__gpio)       (0x0 << ((__gpio) * 4))
+#define S3C64XX_GPB_OUTPUT(__gpio)      (0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPB0_UART_RXD2          (0x02 << 0)
+#define S3C64XX_GPB0_EXTDMA_REQ         (0x03 << 0)
+#define S3C64XX_GPB0_IrDA_RXD           (0x04 << 0)
+#define S3C64XX_GPB0_ADDR_CF0           (0x05 << 0)
+#define S3C64XX_GPB0_EINT_G1_8          (0x07 << 0)
+
+#define S3C64XX_GPB1_UART_TXD2          (0x02 << 4)
+#define S3C64XX_GPB1_EXTDMA_ACK         (0x03 << 4)
+#define S3C64XX_GPB1_IrDA_TXD           (0x04 << 4)
+#define S3C64XX_GPB1_ADDR_CF1           (0x05 << 4)
+#define S3C64XX_GPB1_EINT_G1_9          (0x07 << 4)
+
+#define S3C64XX_GPB2_UART_RXD3          (0x02 << 8)
+#define S3C64XX_GPB2_IrDA_RXD           (0x03 << 8)
+#define S3C64XX_GPB2_EXTDMA_REQ         (0x04 << 8)
+#define S3C64XX_GPB2_ADDR_CF2           (0x05 << 8)
+#define S3C64XX_GPB2_I2C_SCL1           (0x06 << 8)
+#define S3C64XX_GPB2_EINT_G1_10         (0x07 << 8)
+
+#define S3C64XX_GPB3_UART_TXD3          (0x02 << 12)
+#define S3C64XX_GPB3_IrDA_TXD           (0x03 << 12)
+#define S3C64XX_GPB3_EXTDMA_ACK         (0x04 << 12)
+#define S3C64XX_GPB3_I2C_SDA1           (0x06 << 12)
+#define S3C64XX_GPB3_EINT_G1_11         (0x07 << 12)
+
+#define S3C64XX_GPB4_IrDA_SDBW          (0x02 << 16)
+#define S3C64XX_GPB4_CAM_FIELD          (0x03 << 16)
+#define S3C64XX_GPB4_CF_DATA_DIR        (0x04 << 16)
+#define S3C64XX_GPB4_EINT_G1_12         (0x07 << 16)
+
+#define S3C64XX_GPB5_I2C_SCL0           (0x02 << 20)
+#define S3C64XX_GPB5_EINT_G1_13         (0x07 << 20)
+
+#define S3C64XX_GPB6_I2C_SDA0           (0x02 << 24)
+#define S3C64XX_GPB6_EINT_G1_14         (0x07 << 24)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
new file mode 100644
index 000000000000..c47daf7e2723
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
@@ -0,0 +1,53 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank C register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPCCON                  (S3C64XX_GPC_BASE + 0x00)
+#define S3C64XX_GPCDAT                  (S3C64XX_GPC_BASE + 0x04)
+#define S3C64XX_GPCPUD                  (S3C64XX_GPC_BASE + 0x08)
+#define S3C64XX_GPCCONSLP               (S3C64XX_GPC_BASE + 0x0c)
+#define S3C64XX_GPCPUDSLP               (S3C64XX_GPC_BASE + 0x10)
+
+#define S3C64XX_GPC_CONMASK(__gpio)     (0xf << ((__gpio) * 4))
+#define S3C64XX_GPC_INPUT(__gpio)       (0x0 << ((__gpio) * 4))
+#define S3C64XX_GPC_OUTPUT(__gpio)      (0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPC0_SPI_MISO0          (0x02 << 0)
+#define S3C64XX_GPC0_EINT_G2_0          (0x07 << 0)
+
+#define S3C64XX_GPC1_SPI_CLKO           (0x02 << 4)
+#define S3C64XX_GPC1_EINT_G2_1          (0x07 << 4)
+
+#define S3C64XX_GPC2_SPI_MOSIO          (0x02 << 8)
+#define S3C64XX_GPC2_EINT_G2_2          (0x07 << 8)
+
+#define S3C64XX_GPC3_SPI_nCSO           (0x02 << 12)
+#define S3C64XX_GPC3_EINT_G2_3          (0x07 << 12)
+
+#define S3C64XX_GPC4_SPI_MISO1          (0x02 << 16)
+#define S3C64XX_GPC4_MMC2_CMD           (0x03 << 16)
+#define S3C64XX_GPC4_I2S0_V40_DO        (0x05 << 16)
+#define S3C64XX_GPC4_EINT_G2_4          (0x07 << 16)
+
+#define S3C64XX_GPC5_SPI_CLK1           (0x02 << 20)
+#define S3C64XX_GPC5_MMC2_CLK           (0x03 << 20)
+#define S3C64XX_GPC5_I2S1_V40_DO        (0x05 << 20)
+#define S3C64XX_GPC5_EINT_G2_5          (0x07 << 20)
+
+#define S3C64XX_GPC6_SPI_MOSI1          (0x02 << 24)
+#define S3C64XX_GPC6_EINT_G2_6          (0x07 << 24)
+
+#define S3C64XX_GPC7_SPI_nCS1           (0x02 << 28)
+#define S3C64XX_GPC7_I2S2_V40_DO        (0x05 << 28)
+#define S3C64XX_GPC7_EINT_G2_7          (0x07 << 28)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h
new file mode 100644
index 000000000000..6fe4a49c26f0
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h
@@ -0,0 +1,49 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank D register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPDCON                  (S3C64XX_GPD_BASE + 0x00)
+#define S3C64XX_GPDDAT                  (S3C64XX_GPD_BASE + 0x04)
+#define S3C64XX_GPDPUD                  (S3C64XX_GPD_BASE + 0x08)
+#define S3C64XX_GPDCONSLP               (S3C64XX_GPD_BASE + 0x0c)
+#define S3C64XX_GPDPUDSLP               (S3C64XX_GPD_BASE + 0x10)
+
+#define S3C64XX_GPD_CONMASK(__gpio)     (0xf << ((__gpio) * 4))
+#define S3C64XX_GPD_INPUT(__gpio)       (0x0 << ((__gpio) * 4))
+#define S3C64XX_GPD_OUTPUT(__gpio)      (0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPD0_PCM0_SCLK          (0x02 << 0)
+#define S3C64XX_GPD0_I2S0_CLK           (0x03 << 0)
+#define S3C64XX_GPD0_AC97_BITCLK        (0x04 << 0)
+#define S3C64XX_GPD0_EINT_G3_0          (0x07 << 0)
+
+#define S3C64XX_GPD1_PCM0_EXTCLK        (0x02 << 4)
+#define S3C64XX_GPD1_I2S0_CDCLK         (0x03 << 4)
+#define S3C64XX_GPD1_AC97_nRESET        (0x04 << 4)
+#define S3C64XX_GPD1_EINT_G3_1          (0x07 << 4)
+
+#define S3C64XX_GPD2_PCM0_FSYNC         (0x02 << 8)
+#define S3C64XX_GPD2_I2S0_LRCLK         (0x03 << 8)
+#define S3C64XX_GPD2_AC97_SYNC          (0x04 << 8)
+#define S3C64XX_GPD2_EINT_G3_2          (0x07 << 8)
+
+#define S3C64XX_GPD3_PCM0_SIN           (0x02 << 12)
+#define S3C64XX_GPD3_I2S0_DI            (0x03 << 12)
+#define S3C64XX_GPD3_AC97_SDI           (0x04 << 12)
+#define S3C64XX_GPD3_EINT_G3_3          (0x07 << 12)
+
+#define S3C64XX_GPD4_PCM0_SOUT          (0x02 << 16)
+#define S3C64XX_GPD4_I2S0_D0            (0x03 << 16)
+#define S3C64XX_GPD4_AC97_SDO           (0x04 << 16)
+#define S3C64XX_GPD4_EINT_G3_4          (0x07 << 16)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h
new file mode 100644
index 000000000000..7fcf3d8e0a48
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h
@@ -0,0 +1,44 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank E register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPECON                  (S3C64XX_GPE_BASE + 0x00)
+#define S3C64XX_GPEDAT                  (S3C64XX_GPE_BASE + 0x04)
+#define S3C64XX_GPEPUD                  (S3C64XX_GPE_BASE + 0x08)
+#define S3C64XX_GPECONSLP               (S3C64XX_GPE_BASE + 0x0c)
+#define S3C64XX_GPEPUDSLP               (S3C64XX_GPE_BASE + 0x10)
+
+#define S3C64XX_GPE_CONMASK(__gpio)     (0xf << ((__gpio) * 4))
+#define S3C64XX_GPE_INPUT(__gpio)       (0x0 << ((__gpio) * 4))
+#define S3C64XX_GPE_OUTPUT(__gpio)      (0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPE0_PCM1_SCLK          (0x02 << 0)
+#define S3C64XX_GPE0_I2S1_CLK           (0x03 << 0)
+#define S3C64XX_GPE0_AC97_BITCLK        (0x04 << 0)
+
+#define S3C64XX_GPE1_PCM1_EXTCLK        (0x02 << 4)
+#define S3C64XX_GPE1_I2S1_CDCLK         (0x03 << 4)
+#define S3C64XX_GPE1_AC97_nRESET        (0x04 << 4)
+
+#define S3C64XX_GPE2_PCM1_FSYNC         (0x02 << 8)
+#define S3C64XX_GPE2_I2S1_LRCLK         (0x03 << 8)
+#define S3C64XX_GPE2_AC97_SYNC          (0x04 << 8)
+
+#define S3C64XX_GPE3_PCM1_SIN           (0x02 << 12)
+#define S3C64XX_GPE3_I2S1_DI            (0x03 << 12)
+#define S3C64XX_GPE3_AC97_SDI           (0x04 << 12)
+
+#define S3C64XX_GPE4_PCM1_SOUT          (0x02 << 16)
+#define S3C64XX_GPE4_I2S1_D0            (0x03 << 16)
+#define S3C64XX_GPE4_AC97_SDO           (0x04 << 16)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h
new file mode 100644
index 000000000000..f3faff974a18
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h
@@ -0,0 +1,71 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank F register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPFCON                  (S3C64XX_GPF_BASE + 0x00)
+#define S3C64XX_GPFDAT                  (S3C64XX_GPF_BASE + 0x04)
+#define S3C64XX_GPFPUD                  (S3C64XX_GPF_BASE + 0x08)
+#define S3C64XX_GPFCONSLP               (S3C64XX_GPF_BASE + 0x0c)
+#define S3C64XX_GPFPUDSLP               (S3C64XX_GPF_BASE + 0x10)
+
+#define S3C64XX_GPF_CONMASK(__gpio)     (0x3 << ((__gpio) * 2))
+#define S3C64XX_GPF_INPUT(__gpio)       (0x0 << ((__gpio) * 2))
+#define S3C64XX_GPF_OUTPUT(__gpio)      (0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPF0_CAMIF_CLK          (0x02 << 0)
+#define S3C64XX_GPF0_EINT_G4_0          (0x03 << 0)
+
+#define S3C64XX_GPF1_CAMIF_HREF         (0x02 << 2)
+#define S3C64XX_GPF1_EINT_G4_1          (0x03 << 2)
+
+#define S3C64XX_GPF2_CAMIF_PCLK         (0x02 << 4)
+#define S3C64XX_GPF2_EINT_G4_2          (0x03 << 4)
+
+#define S3C64XX_GPF3_CAMIF_nRST         (0x02 << 6)
+#define S3C64XX_GPF3_EINT_G4_3          (0x03 << 6)
+
+#define S3C64XX_GPF4_CAMIF_VSYNC        (0x02 << 8)
+#define S3C64XX_GPF4_EINT_G4_4          (0x03 << 8)
+
+#define S3C64XX_GPF5_CAMIF_YDATA0       (0x02 << 10)
+#define S3C64XX_GPF5_EINT_G4_5          (0x03 << 10)
+
+#define S3C64XX_GPF6_CAMIF_YDATA1       (0x02 << 12)
+#define S3C64XX_GPF6_EINT_G4_6          (0x03 << 12)
+
+#define S3C64XX_GPF7_CAMIF_YDATA2       (0x02 << 14)
+#define S3C64XX_GPF7_EINT_G4_7          (0x03 << 14)
+
+#define S3C64XX_GPF8_CAMIF_YDATA3       (0x02 << 16)
+#define S3C64XX_GPF8_EINT_G4_8          (0x03 << 16)
+
+#define S3C64XX_GPF9_CAMIF_YDATA4       (0x02 << 18)
+#define S3C64XX_GPF9_EINT_G4_9          (0x03 << 18)
+
+#define S3C64XX_GPF10_CAMIF_YDATA5      (0x02 << 20)
+#define S3C64XX_GPF10_EINT_G4_10        (0x03 << 20)
+
+#define S3C64XX_GPF11_CAMIF_YDATA6      (0x02 << 22)
+#define S3C64XX_GPF11_EINT_G4_11        (0x03 << 22)
+
+#define S3C64XX_GPF12_CAMIF_YDATA7      (0x02 << 24)
+#define S3C64XX_GPF12_EINT_G4_12        (0x03 << 24)
+
+#define S3C64XX_GPF13_PWM_ECLK          (0x02 << 26)
+#define S3C64XX_GPF13_EINT_G4_13        (0x03 << 26)
+
+#define S3C64XX_GPF14_PWM_TOUT0         (0x02 << 28)
+#define S3C64XX_GPF14_CLKOUT0           (0x03 << 28)
+
+#define S3C64XX_GPF15_PWM_TOUT1         (0x02 << 30)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h
new file mode 100644
index 000000000000..35bbd2378e55
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h
@@ -0,0 +1,42 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank G register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPGCON                  (S3C64XX_GPG_BASE + 0x00)
+#define S3C64XX_GPGDAT                  (S3C64XX_GPG_BASE + 0x04)
+#define S3C64XX_GPGPUD                  (S3C64XX_GPG_BASE + 0x08)
+#define S3C64XX_GPGCONSLP               (S3C64XX_GPG_BASE + 0x0c)
+#define S3C64XX_GPGPUDSLP               (S3C64XX_GPG_BASE + 0x10)
+
+#define S3C64XX_GPG_CONMASK(__gpio)     (0xf << ((__gpio) * 4))
+#define S3C64XX_GPG_INPUT(__gpio)       (0x0 << ((__gpio) * 4))
+#define S3C64XX_GPG_OUTPUT(__gpio)      (0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPG0_MMC0_CLK           (0x02 << 0)
+#define S3C64XX_GPG0_EINT_G5_0          (0x07 << 0)
+
+#define S3C64XX_GPG1_MMC0_CMD           (0x02 << 4)
+#define S3C64XX_GPG1_EINT_G5_1          (0x07 << 4)
+
+#define S3C64XX_GPG2_MMC0_DATA0         (0x02 << 8)
+#define S3C64XX_GPG2_EINT_G5_2          (0x07 << 8)
+
+#define S3C64XX_GPG3_MMC0_DATA1         (0x02 << 12)
+#define S3C64XX_GPG3_EINT_G5_3          (0x07 << 12)
+
+#define S3C64XX_GPG4_MMC0_DATA2         (0x02 << 16)
+#define S3C64XX_GPG4_EINT_G5_4          (0x07 << 16)
+
+#define S3C64XX_GPG5_MMC0_DATA3         (0x02 << 20)
+#define S3C64XX_GPG5_EINT_G5_5          (0x07 << 20)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
new file mode 100644
index 000000000000..81549516572f
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
@@ -0,0 +1,74 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank H register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPHCON0                 (S3C64XX_GPH_BASE + 0x00)
+#define S3C64XX_GPHCON1                 (S3C64XX_GPH_BASE + 0x04)
+#define S3C64XX_GPHDAT                  (S3C64XX_GPH_BASE + 0x08)
+#define S3C64XX_GPHPUD                  (S3C64XX_GPH_BASE + 0x0c)
+#define S3C64XX_GPHCONSLP               (S3C64XX_GPH_BASE + 0x10)
+#define S3C64XX_GPHPUDSLP               (S3C64XX_GPH_BASE + 0x14)
+
+#define S3C64XX_GPH_CONMASK(__gpio)     (0xf << ((__gpio) * 4))
+#define S3C64XX_GPH_INPUT(__gpio)       (0x0 << ((__gpio) * 4))
+#define S3C64XX_GPH_OUTPUT(__gpio)      (0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPH0_MMC1_CLK           (0x02 << 0)
+#define S3C64XX_GPH0_KP_COL0            (0x04 << 0)
+#define S3C64XX_GPH0_EINT_G6_0          (0x07 << 0)
+
+#define S3C64XX_GPH1_MMC1_CMD           (0x02 << 4)
+#define S3C64XX_GPH1_KP_COL1            (0x04 << 4)
+#define S3C64XX_GPH1_EINT_G6_1          (0x07 << 4)
+
+#define S3C64XX_GPH2_MMC1_DATA0         (0x02 << 8)
+#define S3C64XX_GPH2_KP_COL2            (0x04 << 8)
+#define S3C64XX_GPH2_EINT_G6_2          (0x07 << 8)
+
+#define S3C64XX_GPH3_MMC1_DATA1         (0x02 << 12)
+#define S3C64XX_GPH3_KP_COL3            (0x04 << 12)
+#define S3C64XX_GPH3_EINT_G6_3          (0x07 << 12)
+
+#define S3C64XX_GPH4_MMC1_DATA2         (0x02 << 16)
+#define S3C64XX_GPH4_KP_COL4            (0x04 << 16)
+#define S3C64XX_GPH4_EINT_G6_4          (0x07 << 16)
+
+#define S3C64XX_GPH5_MMC1_DATA3         (0x02 << 20)
+#define S3C64XX_GPH5_KP_COL5            (0x04 << 20)
+#define S3C64XX_GPH5_EINT_G6_5          (0x07 << 20)
+
+#define S3C64XX_GPH6_MMC1_DATA4         (0x02 << 24)
+#define S3C64XX_GPH6_MMC2_DATA0         (0x03 << 24)
+#define S3C64XX_GPH6_KP_COL6            (0x04 << 24)
+#define S3C64XX_GPH6_I2S_V40_BCLK       (0x05 << 24)
+#define S3C64XX_GPH6_ADDR_CF0           (0x06 << 24)
+#define S3C64XX_GPH6_EINT_G6_6          (0x07 << 24)
+
+#define S3C64XX_GPH7_MMC1_DATA5         (0x02 << 28)
+#define S3C64XX_GPH7_MMC2_DATA1         (0x03 << 28)
+#define S3C64XX_GPH7_KP_COL7            (0x04 << 28)
+#define S3C64XX_GPH7_I2S_V40_CDCLK      (0x05 << 28)
+#define S3C64XX_GPH7_ADDR_CF1           (0x06 << 28)
+#define S3C64XX_GPH7_EINT_G6_7          (0x07 << 28)
+
+#define S3C64XX_GPH8_MMC1_DATA6         (0x02 << 32)
+#define S3C64XX_GPH8_MMC2_DATA2         (0x03 << 32)
+#define S3C64XX_GPH8_I2S_V40_LRCLK      (0x05 << 32)
+#define S3C64XX_GPH8_ADDR_CF2           (0x06 << 32)
+#define S3C64XX_GPH8_EINT_G6_8          (0x07 << 32)
+
+#define S3C64XX_GPH9_MMC1_DATA7         (0x02 << 36)
+#define S3C64XX_GPH9_MMC2_DATA3         (0x03 << 36)
+#define S3C64XX_GPH9_I2S_V40_DI         (0x05 << 36)
+#define S3C64XX_GPH9_EINT_G6_9          (0x07 << 36)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h
new file mode 100644
index 000000000000..ce9ebe335566
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h
@@ -0,0 +1,40 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank I register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPICON                  (S3C64XX_GPI_BASE + 0x00)
+#define S3C64XX_GPIDAT                  (S3C64XX_GPI_BASE + 0x04)
+#define S3C64XX_GPIPUD                  (S3C64XX_GPI_BASE + 0x08)
+#define S3C64XX_GPICONSLP               (S3C64XX_GPI_BASE + 0x0c)
+#define S3C64XX_GPIPUDSLP               (S3C64XX_GPI_BASE + 0x10)
+
+#define S3C64XX_GPI_CONMASK(__gpio)     (0x3 << ((__gpio) * 2))
+#define S3C64XX_GPI_INPUT(__gpio)       (0x0 << ((__gpio) * 2))
+#define S3C64XX_GPI_OUTPUT(__gpio)      (0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPI0_VD0                (0x02 << 0)
+#define S3C64XX_GPI1_VD1                (0x02 << 2)
+#define S3C64XX_GPI2_VD2                (0x02 << 4)
+#define S3C64XX_GPI3_VD3                (0x02 << 6)
+#define S3C64XX_GPI4_VD4                (0x02 << 8)
+#define S3C64XX_GPI5_VD5                (0x02 << 10)
+#define S3C64XX_GPI6_VD6                (0x02 << 12)
+#define S3C64XX_GPI7_VD7                (0x02 << 14)
+#define S3C64XX_GPI8_VD8                (0x02 << 16)
+#define S3C64XX_GPI9_VD9                (0x02 << 18)
+#define S3C64XX_GPI10_VD10              (0x02 << 20)
+#define S3C64XX_GPI11_VD11              (0x02 << 22)
+#define S3C64XX_GPI12_VD12              (0x02 << 24)
+#define S3C64XX_GPI13_VD13              (0x02 << 26)
+#define S3C64XX_GPI14_VD14              (0x02 << 28)
+#define S3C64XX_GPI15_VD15              (0x02 << 30)
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h
new file mode 100644
index 000000000000..21a906299d30
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h
@@ -0,0 +1,36 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank J register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPJCON                  (S3C64XX_GPJ_BASE + 0x00)
+#define S3C64XX_GPJDAT                  (S3C64XX_GPJ_BASE + 0x04)
+#define S3C64XX_GPJPUD                  (S3C64XX_GPJ_BASE + 0x08)
+#define S3C64XX_GPJCONSLP               (S3C64XX_GPJ_BASE + 0x0c)
+#define S3C64XX_GPJPUDSLP               (S3C64XX_GPJ_BASE + 0x10)
+
+#define S3C64XX_GPJ_CONMASK(__gpio)     (0x3 << ((__gpio) * 2))
+#define S3C64XX_GPJ_INPUT(__gpio)       (0x0 << ((__gpio) * 2))
+#define S3C64XX_GPJ_OUTPUT(__gpio)      (0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPJ0_VD16               (0x02 << 0)
+#define S3C64XX_GPJ1_VD17               (0x02 << 2)
+#define S3C64XX_GPJ2_VD18               (0x02 << 4)
+#define S3C64XX_GPJ3_VD19               (0x02 << 6)
+#define S3C64XX_GPJ4_VD20               (0x02 << 8)
+#define S3C64XX_GPJ5_VD21               (0x02 << 10)
+#define S3C64XX_GPJ6_VD22               (0x02 << 12)
+#define S3C64XX_GPJ7_VD23               (0x02 << 14)
+#define S3C64XX_GPJ8_LCD_HSYNC          (0x02 << 16)
+#define S3C64XX_GPJ9_LCD_VSYNC          (0x02 << 18)
+#define S3C64XX_GPJ10_LCD_VDEN          (0x02 << 20)
+#define S3C64XX_GPJ11_LCD_VCLK          (0x02 << 22)
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h
new file mode 100644
index 000000000000..569e76120881
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h
@@ -0,0 +1,54 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank N register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPNCON                  (S3C64XX_GPN_BASE + 0x00)
+#define S3C64XX_GPNDAT                  (S3C64XX_GPN_BASE + 0x04)
+#define S3C64XX_GPNPUD                  (S3C64XX_GPN_BASE + 0x08)
+
+#define S3C64XX_GPN_CONMASK(__gpio)     (0x3 << ((__gpio) * 2))
+#define S3C64XX_GPN_INPUT(__gpio)       (0x0 << ((__gpio) * 2))
+#define S3C64XX_GPN_OUTPUT(__gpio)      (0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPN0_EINT0              (0x02 << 0)
+#define S3C64XX_GPN0_KP_ROW0            (0x03 << 0)
+
+#define S3C64XX_GPN1_EINT1              (0x02 << 2)
+#define S3C64XX_GPN1_KP_ROW1            (0x03 << 2)
+
+#define S3C64XX_GPN2_EINT2              (0x02 << 4)
+#define S3C64XX_GPN2_KP_ROW2            (0x03 << 4)
+
+#define S3C64XX_GPN3_EINT3              (0x02 << 6)
+#define S3C64XX_GPN3_KP_ROW3            (0x03 << 6)
+
+#define S3C64XX_GPN4_EINT4              (0x02 << 8)
+#define S3C64XX_GPN4_KP_ROW4            (0x03 << 8)
+
+#define S3C64XX_GPN5_EINT5              (0x02 << 10)
+#define S3C64XX_GPN5_KP_ROW5            (0x03 << 10)
+
+#define S3C64XX_GPN6_EINT6              (0x02 << 12)
+#define S3C64XX_GPN6_KP_ROW6            (0x03 << 12)
+
+#define S3C64XX_GPN7_EINT7              (0x02 << 14)
+#define S3C64XX_GPN7_KP_ROW7            (0x03 << 14)
+
+#define S3C64XX_GPN8_EINT8              (0x02 << 16)
+#define S3C64XX_GPN9_EINT9              (0x02 << 18)
+#define S3C64XX_GPN10_EINT10            (0x02 << 20)
+#define S3C64XX_GPN11_EINT11            (0x02 << 22)
+#define S3C64XX_GPN12_EINT12            (0x02 << 24)
+#define S3C64XX_GPN13_EINT13            (0x02 << 26)
+#define S3C64XX_GPN14_EINT14            (0x02 << 28)
+#define S3C64XX_GPN15_EINT15            (0x02 << 30)
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h
new file mode 100644
index 000000000000..b09e12954b57
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h
@@ -0,0 +1,70 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank O register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPOCON                  (S3C64XX_GPO_BASE + 0x00)
+#define S3C64XX_GPODAT                  (S3C64XX_GPO_BASE + 0x04)
+#define S3C64XX_GPOPUD                  (S3C64XX_GPO_BASE + 0x08)
+#define S3C64XX_GPOCONSLP               (S3C64XX_GPO_BASE + 0x0c)
+#define S3C64XX_GPOPUDSLP               (S3C64XX_GPO_BASE + 0x10)
+
+#define S3C64XX_GPO_CONMASK(__gpio)     (0x3 << ((__gpio) * 2))
+#define S3C64XX_GPO_INPUT(__gpio)       (0x0 << ((__gpio) * 2))
+#define S3C64XX_GPO_OUTPUT(__gpio)      (0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPO0_MEM0_nCS2          (0x02 << 0)
+#define S3C64XX_GPO0_EINT_G7_0          (0x03 << 0)
+
+#define S3C64XX_GPO1_MEM0_nCS3          (0x02 << 2)
+#define S3C64XX_GPO1_EINT_G7_1          (0x03 << 2)
+
+#define S3C64XX_GPO2_MEM0_nCS4          (0x02 << 4)
+#define S3C64XX_GPO2_EINT_G7_2          (0x03 << 4)
+
+#define S3C64XX_GPO3_MEM0_nCS5          (0x02 << 6)
+#define S3C64XX_GPO3_EINT_G7_3          (0x03 << 6)
+
+#define S3C64XX_GPO4_EINT_G7_4          (0x03 << 8)
+
+#define S3C64XX_GPO5_EINT_G7_5          (0x03 << 10)
+
+#define S3C64XX_GPO6_MEM0_ADDR6         (0x02 << 12)
+#define S3C64XX_GPO6_EINT_G7_6          (0x03 << 12)
+
+#define S3C64XX_GPO7_MEM0_ADDR7         (0x02 << 14)
+#define S3C64XX_GPO7_EINT_G7_7          (0x03 << 14)
+
+#define S3C64XX_GPO8_MEM0_ADDR8         (0x02 << 16)
+#define S3C64XX_GPO8_EINT_G7_8          (0x03 << 16)
+
+#define S3C64XX_GPO9_MEM0_ADDR9         (0x02 << 18)
+#define S3C64XX_GPO9_EINT_G7_9          (0x03 << 18)
+
+#define S3C64XX_GPO10_MEM0_ADDR10       (0x02 << 20)
+#define S3C64XX_GPO10_EINT_G7_10        (0x03 << 20)
+
+#define S3C64XX_GPO11_MEM0_ADDR11       (0x02 << 22)
+#define S3C64XX_GPO11_EINT_G7_11        (0x03 << 22)
+
+#define S3C64XX_GPO12_MEM0_ADDR12       (0x02 << 24)
+#define S3C64XX_GPO12_EINT_G7_12        (0x03 << 24)
+
+#define S3C64XX_GPO13_MEM0_ADDR13       (0x02 << 26)
+#define S3C64XX_GPO13_EINT_G7_13        (0x03 << 26)
+
+#define S3C64XX_GPO14_MEM0_ADDR14       (0x02 << 28)
+#define S3C64XX_GPO14_EINT_G7_14        (0x03 << 28)
+
+#define S3C64XX_GPO15_MEM0_ADDR15       (0x02 << 30)
+#define S3C64XX_GPO15_EINT_G7_15        (0x03 << 30)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h
new file mode 100644
index 000000000000..92f00517926b
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h
@@ -0,0 +1,69 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank P register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPPCON                  (S3C64XX_GPP_BASE + 0x00)
+#define S3C64XX_GPPDAT                  (S3C64XX_GPP_BASE + 0x04)
+#define S3C64XX_GPPPUD                  (S3C64XX_GPP_BASE + 0x08)
+#define S3C64XX_GPPCONSLP               (S3C64XX_GPP_BASE + 0x0c)
+#define S3C64XX_GPPPUDSLP               (S3C64XX_GPP_BASE + 0x10)
+
+#define S3C64XX_GPP_CONMASK(__gpio)     (0x3 << ((__gpio) * 2))
+#define S3C64XX_GPP_INPUT(__gpio)       (0x0 << ((__gpio) * 2))
+#define S3C64XX_GPP_OUTPUT(__gpio)      (0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPP0_MEM0_ADDRV         (0x02 << 0)
+#define S3C64XX_GPP0_EINT_G8_0          (0x03 << 0)
+
+#define S3C64XX_GPP1_MEM0_SMCLK         (0x02 << 2)
+#define S3C64XX_GPP1_EINT_G8_1          (0x03 << 2)
+
+#define S3C64XX_GPP2_MEM0_nWAIT         (0x02 << 4)
+#define S3C64XX_GPP2_EINT_G8_2          (0x03 << 4)
+
+#define S3C64XX_GPP3_MEM0_RDY0_ALE      (0x02 << 6)
+#define S3C64XX_GPP3_EINT_G8_3          (0x03 << 6)
+
+#define S3C64XX_GPP4_MEM0_RDY1_CLE      (0x02 << 8)
+#define S3C64XX_GPP4_EINT_G8_4          (0x03 << 8)
+
+#define S3C64XX_GPP5_MEM0_INTsm0_FWE    (0x02 << 10)
+#define S3C64XX_GPP5_EINT_G8_5          (0x03 << 10)
+
+#define S3C64XX_GPP6_MEM0_(null)        (0x02 << 12)
+#define S3C64XX_GPP6_EINT_G8_6          (0x03 << 12)
+
+#define S3C64XX_GPP7_MEM0_INTsm1_FRE    (0x02 << 14)
+#define S3C64XX_GPP7_EINT_G8_7          (0x03 << 14)
+
+#define S3C64XX_GPP8_MEM0_RPn_RnB       (0x02 << 16)
+#define S3C64XX_GPP8_EINT_G8_8          (0x03 << 16)
+
+#define S3C64XX_GPP9_MEM0_ATA_RESET     (0x02 << 18)
+#define S3C64XX_GPP9_EINT_G8_9          (0x03 << 18)
+
+#define S3C64XX_GPP10_MEM0_ATA_INPACK   (0x02 << 20)
+#define S3C64XX_GPP10_EINT_G8_10        (0x03 << 20)
+
+#define S3C64XX_GPP11_MEM0_ATA_REG      (0x02 << 22)
+#define S3C64XX_GPP11_EINT_G8_11        (0x03 << 22)
+
+#define S3C64XX_GPP12_MEM0_ATA_WE       (0x02 << 24)
+#define S3C64XX_GPP12_EINT_G8_12        (0x03 << 24)
+
+#define S3C64XX_GPP13_MEM0_ATA_OE       (0x02 << 26)
+#define S3C64XX_GPP13_EINT_G8_13        (0x03 << 26)
+
+#define S3C64XX_GPP14_MEM0_ATA_CD       (0x02 << 28)
+#define S3C64XX_GPP14_EINT_G8_14        (0x03 << 28)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h
new file mode 100644
index 000000000000..565e60aaee47
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h
@@ -0,0 +1,46 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank Q register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPQCON                  (S3C64XX_GPQ_BASE + 0x00)
+#define S3C64XX_GPQDAT                  (S3C64XX_GPQ_BASE + 0x04)
+#define S3C64XX_GPQPUD                  (S3C64XX_GPQ_BASE + 0x08)
+#define S3C64XX_GPQCONSLP               (S3C64XX_GPQ_BASE + 0x0c)
+#define S3C64XX_GPQPUDSLP               (S3C64XX_GPQ_BASE + 0x10)
+
+#define S3C64XX_GPQ_CONMASK(__gpio)     (0x3 << ((__gpio) * 2))
+#define S3C64XX_GPQ_INPUT(__gpio)       (0x0 << ((__gpio) * 2))
+#define S3C64XX_GPQ_OUTPUT(__gpio)      (0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPQ0_MEM0_ADDR18_RAS    (0x02 << 0)
+#define S3C64XX_GPQ0_EINT_G9_0          (0x03 << 0)
+
+#define S3C64XX_GPQ1_MEM0_ADDR19_CAS    (0x02 << 2)
+#define S3C64XX_GPQ1_EINT_G9_1          (0x03 << 2)
+
+#define S3C64XX_GPQ2_EINT_G9_2          (0x03 << 4)
+
+#define S3C64XX_GPQ3_EINT_G9_3          (0x03 << 6)
+
+#define S3C64XX_GPQ4_EINT_G9_4          (0x03 << 8)
+
+#define S3C64XX_GPQ5_EINT_G9_5          (0x03 << 10)
+
+#define S3C64XX_GPQ6_EINT_G9_6          (0x03 << 12)
+
+#define S3C64XX_GPQ7_MEM0_ADDR17_WENDMC (0x02 << 14)
+#define S3C64XX_GPQ7_EINT_G9_7          (0x03 << 14)
+
+#define S3C64XX_GPQ8_MEM0_ADDR16_APDMC  (0x02 << 16)
+#define S3C64XX_GPQ8_EINT_G9_8          (0x03 << 16)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h
new file mode 100644
index 000000000000..02e8dd4c97d5
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/irqs.h
@@ -0,0 +1,201 @@
+/* linux/arch/arm/plat-s3c64xx/include/mach/irqs.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Common IRQ support
+ */
+
+#ifndef __ASM_PLAT_S3C64XX_IRQS_H
+#define __ASM_PLAT_S3C64XX_IRQS_H __FILE__
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ * note, since we're using the VICs, our start must be a
+ * mulitple of 32 to allow the common code to work
+ */
+
+#define S3C_IRQ_OFFSET  (32)
+
+#define S3C_IRQ(x)      ((x) + S3C_IRQ_OFFSET)
+
+#define S3C_VIC0_BASE   S3C_IRQ(0)
+#define S3C_VIC1_BASE   S3C_IRQ(32)
+
+/* UART interrupts, each UART has 4 intterupts per channel so
+ * use the space between the ISA and S3C main interrupts. Note, these
+ * are not in the same order as the S3C24XX series! */
+
+#define IRQ_S3CUART_BASE0       (16)
+#define IRQ_S3CUART_BASE1       (20)
+#define IRQ_S3CUART_BASE2       (24)
+#define IRQ_S3CUART_BASE3       (28)
+
+#define UART_IRQ_RXD            (0)
+#define UART_IRQ_ERR            (1)
+#define UART_IRQ_TXD            (2)
+#define UART_IRQ_MODEM          (3)
+
+#define IRQ_S3CUART_RX0         (IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX0         (IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR0        (IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX1         (IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX1         (IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR1        (IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX2         (IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX2         (IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR2        (IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX3         (IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX3         (IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR3        (IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
+
+/* VIC based IRQs */
+
+#define S3C64XX_IRQ_VIC0(x)     (S3C_VIC0_BASE + (x))
+#define S3C64XX_IRQ_VIC1(x)     (S3C_VIC1_BASE + (x))
+
+/* VIC0 */
+
+#define IRQ_EINT0_3             S3C64XX_IRQ_VIC0(0)
+#define IRQ_EINT4_11            S3C64XX_IRQ_VIC0(1)
+#define IRQ_RTC_TIC             S3C64XX_IRQ_VIC0(2)
+#define IRQ_CAMIF_C             S3C64XX_IRQ_VIC0(3)
+#define IRQ_CAMIF_P             S3C64XX_IRQ_VIC0(4)
+#define IRQ_CAMIF_MC            S3C64XX_IRQ_VIC0(5)
+#define IRQ_S3C6410_IIC1        S3C64XX_IRQ_VIC0(5)
+#define IRQ_S3C6410_IIS         S3C64XX_IRQ_VIC0(6)
+#define IRQ_S3C6400_CAMIF_MP    S3C64XX_IRQ_VIC0(6)
+#define IRQ_CAMIF_WE_C          S3C64XX_IRQ_VIC0(7)
+#define IRQ_S3C6410_G3D         S3C64XX_IRQ_VIC0(8)
+#define IRQ_S3C6400_CAMIF_WE_P  S3C64XX_IRQ_VIC0(8)
+#define IRQ_POST0               S3C64XX_IRQ_VIC0(9)
+#define IRQ_ROTATOR             S3C64XX_IRQ_VIC0(10)
+#define IRQ_2D                  S3C64XX_IRQ_VIC0(11)
+#define IRQ_TVENC               S3C64XX_IRQ_VIC0(12)
+#define IRQ_SCALER              S3C64XX_IRQ_VIC0(13)
+#define IRQ_BATF                S3C64XX_IRQ_VIC0(14)
+#define IRQ_JPEG                S3C64XX_IRQ_VIC0(15)
+#define IRQ_MFC                 S3C64XX_IRQ_VIC0(16)
+#define IRQ_SDMA0               S3C64XX_IRQ_VIC0(17)
+#define IRQ_SDMA1               S3C64XX_IRQ_VIC0(18)
+#define IRQ_ARM_DMAERR          S3C64XX_IRQ_VIC0(19)
+#define IRQ_ARM_DMA             S3C64XX_IRQ_VIC0(20)
+#define IRQ_ARM_DMAS            S3C64XX_IRQ_VIC0(21)
+#define IRQ_KEYPAD              S3C64XX_IRQ_VIC0(22)
+#define IRQ_TIMER0_VIC          S3C64XX_IRQ_VIC0(23)
+#define IRQ_TIMER1_VIC          S3C64XX_IRQ_VIC0(24)
+#define IRQ_TIMER2_VIC          S3C64XX_IRQ_VIC0(25)
+#define IRQ_WDT                 S3C64XX_IRQ_VIC0(26)
+#define IRQ_TIMER3_VIC          S3C64XX_IRQ_VIC0(27)
+#define IRQ_TIMER4_VIC          S3C64XX_IRQ_VIC0(28)
+#define IRQ_LCD_FIFO            S3C64XX_IRQ_VIC0(29)
+#define IRQ_LCD_VSYNC           S3C64XX_IRQ_VIC0(30)
+#define IRQ_LCD_SYSTEM          S3C64XX_IRQ_VIC0(31)
+
+/* VIC1 */
+
+#define IRQ_EINT12_19           S3C64XX_IRQ_VIC1(0)
+#define IRQ_EINT20_27           S3C64XX_IRQ_VIC1(1)
+#define IRQ_PCM0                S3C64XX_IRQ_VIC1(2)
+#define IRQ_PCM1                S3C64XX_IRQ_VIC1(3)
+#define IRQ_AC97                S3C64XX_IRQ_VIC1(4)
+#define IRQ_UART0               S3C64XX_IRQ_VIC1(5)
+#define IRQ_UART1               S3C64XX_IRQ_VIC1(6)
+#define IRQ_UART2               S3C64XX_IRQ_VIC1(7)
+#define IRQ_UART3               S3C64XX_IRQ_VIC1(8)
+#define IRQ_DMA0                S3C64XX_IRQ_VIC1(9)
+#define IRQ_DMA1                S3C64XX_IRQ_VIC1(10)
+#define IRQ_ONENAND0            S3C64XX_IRQ_VIC1(11)
+#define IRQ_ONENAND1            S3C64XX_IRQ_VIC1(12)
+#define IRQ_NFC                 S3C64XX_IRQ_VIC1(13)
+#define IRQ_CFCON               S3C64XX_IRQ_VIC1(14)
+#define IRQ_UHOST               S3C64XX_IRQ_VIC1(15)
+#define IRQ_SPI0                S3C64XX_IRQ_VIC1(16)
+#define IRQ_SPI1                S3C64XX_IRQ_VIC1(17)
+#define IRQ_IIC                 S3C64XX_IRQ_VIC1(18)
+#define IRQ_HSItx               S3C64XX_IRQ_VIC1(19)
+#define IRQ_HSIrx               S3C64XX_IRQ_VIC1(20)
+#define IRQ_RESERVED            S3C64XX_IRQ_VIC1(21)
+#define IRQ_MSM                 S3C64XX_IRQ_VIC1(22)
+#define IRQ_HOSTIF              S3C64XX_IRQ_VIC1(23)
+#define IRQ_HSMMC0              S3C64XX_IRQ_VIC1(24)
+#define IRQ_HSMMC1              S3C64XX_IRQ_VIC1(25)
+#define IRQ_HSMMC2              IRQ_SPI1        /* shared with SPI1 */
+#define IRQ_OTG                 S3C64XX_IRQ_VIC1(26)
+#define IRQ_IRDA                S3C64XX_IRQ_VIC1(27)
+#define IRQ_RTC_ALARM           S3C64XX_IRQ_VIC1(28)
+#define IRQ_SEC                 S3C64XX_IRQ_VIC1(29)
+#define IRQ_PENDN               S3C64XX_IRQ_VIC1(30)
+#define IRQ_TC                  IRQ_PENDN
+#define IRQ_ADC                 S3C64XX_IRQ_VIC1(31)
+
+#define S3C64XX_TIMER_IRQ(x)    S3C_IRQ(64 + (x))
+
+#define IRQ_TIMER0              S3C64XX_TIMER_IRQ(0)
+#define IRQ_TIMER1              S3C64XX_TIMER_IRQ(1)
+#define IRQ_TIMER2              S3C64XX_TIMER_IRQ(2)
+#define IRQ_TIMER3              S3C64XX_TIMER_IRQ(3)
+#define IRQ_TIMER4              S3C64XX_TIMER_IRQ(4)
+
+/* compatibility for device defines */
+
+#define IRQ_IIC1                IRQ_S3C6410_IIC1
+
+/* Since the IRQ_EINT(x) are a linear mapping on current s3c64xx series
+ * we just defined them as an IRQ_EINT(x) macro from S3C_IRQ_EINT_BASE
+ * which we place after the pair of VICs. */
+
+#define S3C_IRQ_EINT_BASE       S3C_IRQ(64+5)
+
+#define S3C_EINT(x)             ((x) + S3C_IRQ_EINT_BASE)
+#define IRQ_EINT(x)             S3C_EINT(x)
+
+/* Next the external interrupt groups. These are similar to the IRQ_EINT(x)
+ * that they are sourced from the GPIO pins but with a different scheme for
+ * priority and source indication.
+ *
+ * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO
+ * interrupts, but for historical reasons they are kept apart from these
+ * next interrupts.
+ *
+ * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the
+ * machine specific support files.
+ */
+
+#define IRQ_EINT_GROUP1_NR      (15)
+#define IRQ_EINT_GROUP2_NR      (8)
+#define IRQ_EINT_GROUP3_NR      (5)
+#define IRQ_EINT_GROUP4_NR      (14)
+#define IRQ_EINT_GROUP5_NR      (7)
+#define IRQ_EINT_GROUP6_NR      (10)
+#define IRQ_EINT_GROUP7_NR      (16)
+#define IRQ_EINT_GROUP8_NR      (15)
+#define IRQ_EINT_GROUP9_NR      (9)
+
+#define IRQ_EINT_GROUP_BASE     S3C_EINT(28)
+#define IRQ_EINT_GROUP1_BASE    (IRQ_EINT_GROUP_BASE + 0x00)
+#define IRQ_EINT_GROUP2_BASE    (IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR)
+#define IRQ_EINT_GROUP3_BASE    (IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR)
+#define IRQ_EINT_GROUP4_BASE    (IRQ_EINT_GROUP3_BASE + IRQ_EINT_GROUP3_NR)
+#define IRQ_EINT_GROUP5_BASE    (IRQ_EINT_GROUP4_BASE + IRQ_EINT_GROUP4_NR)
+#define IRQ_EINT_GROUP6_BASE    (IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR)
+#define IRQ_EINT_GROUP7_BASE    (IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR)
+#define IRQ_EINT_GROUP8_BASE    (IRQ_EINT_GROUP7_BASE + IRQ_EINT_GROUP7_NR)
+#define IRQ_EINT_GROUP9_BASE    (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR)
+
+#define IRQ_EINT_GROUP(group, no)       (IRQ_EINT_GROUP##group##__BASE + (x))
+
+/* Set the default NR_IRQS */
+
+#define NR_IRQS (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
+
+#endif /* __ASM_PLAT_S3C64XX_IRQS_H */
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/pll.h b/arch/arm/plat-s3c64xx/include/plat/pll.h
new file mode 100644
index 000000000000..90bbd72fdc4e
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/pll.h
@@ -0,0 +1,74 @@
+/* arch/arm/plat-s3c64xx/include/plat/pll.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX PLL code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C6400_PLL_MDIV_MASK   ((1 << (25-16+1)) - 1)
+#define S3C6400_PLL_PDIV_MASK   ((1 << (13-8+1)) - 1)
+#define S3C6400_PLL_SDIV_MASK   ((1 << (2-0+1)) - 1)
+#define S3C6400_PLL_MDIV_SHIFT  (16)
+#define S3C6400_PLL_PDIV_SHIFT  (8)
+#define S3C6400_PLL_SDIV_SHIFT  (0)
+
+#include <asm/div64.h>
+
+static inline unsigned long s3c6400_get_pll(unsigned long baseclk,
+                                            u32 pllcon)
+{
+        u32 mdiv, pdiv, sdiv;
+        u64 fvco = baseclk;
+
+        mdiv = (pllcon >> S3C6400_PLL_MDIV_SHIFT) & S3C6400_PLL_MDIV_MASK;
+        pdiv = (pllcon >> S3C6400_PLL_PDIV_SHIFT) & S3C6400_PLL_PDIV_MASK;
+        sdiv = (pllcon >> S3C6400_PLL_SDIV_SHIFT) & S3C6400_PLL_SDIV_MASK;
+
+        fvco *= mdiv;
+        do_div(fvco, (pdiv << sdiv));
+
+        return (unsigned long)fvco;
+}
+
+#define S3C6400_EPLL_MDIV_MASK  ((1 << (23-16)) - 1)
+#define S3C6400_EPLL_PDIV_MASK  ((1 << (13-8)) - 1)
+#define S3C6400_EPLL_SDIV_MASK  ((1 << (2-0)) - 1)
+#define S3C6400_EPLL_MDIV_SHIFT (16)
+#define S3C6400_EPLL_PDIV_SHIFT (8)
+#define S3C6400_EPLL_SDIV_SHIFT (0)
+#define S3C6400_EPLL_KDIV_MASK  (0xffff)
+
+static inline unsigned long s3c6400_get_epll(unsigned long baseclk)
+{
+        unsigned long result;
+        u32 epll0 = __raw_readl(S3C_EPLL_CON0);
+        u32 epll1 = __raw_readl(S3C_EPLL_CON1);
+        u32 mdiv, pdiv, sdiv, kdiv;
+        u64 tmp;
+
+        mdiv = (epll0 >> S3C6400_EPLL_MDIV_SHIFT) & S3C6400_EPLL_MDIV_MASK;
+        pdiv = (epll0 >> S3C6400_EPLL_PDIV_SHIFT) & S3C6400_EPLL_PDIV_MASK;
+        sdiv = (epll0 >> S3C6400_EPLL_SDIV_SHIFT) & S3C6400_EPLL_SDIV_MASK;
+        kdiv = epll1 & S3C6400_EPLL_KDIV_MASK;
+
+        /* We need to multiple baseclk by mdiv (the integer part) and kdiv
+         * which is in 2^16ths, so shift mdiv up (does not overflow) and
+         * add kdiv before multiplying. The use of tmp is to avoid any
+         * overflows before shifting bac down into result when multipling
+         * by the mdiv and kdiv pair.
+         */
+
+        tmp = baseclk;
+        tmp *= (mdiv << 16) + kdiv;
+        do_div(tmp, (pdiv << sdiv));
+        result = tmp >> 16;
+
+        return result;
+}
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
new file mode 100644
index 000000000000..b1082c163247
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
@@ -0,0 +1,224 @@
+/* arch/arm/plat-s3c64xx/include/plat/regs-clock.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_REGS_CLOCK_H
+#define __PLAT_REGS_CLOCK_H __FILE__
+
+#define S3C_CLKREG(x)           (S3C_VA_SYS + (x))
+
+#define S3C_APLL_LOCK           S3C_CLKREG(0x00)
+#define S3C_MPLL_LOCK           S3C_CLKREG(0x04)
+#define S3C_EPLL_LOCK           S3C_CLKREG(0x08)
+#define S3C_APLL_CON            S3C_CLKREG(0x0C)
+#define S3C_MPLL_CON            S3C_CLKREG(0x10)
+#define S3C_EPLL_CON0           S3C_CLKREG(0x14)
+#define S3C_EPLL_CON1           S3C_CLKREG(0x18)
+#define S3C_CLK_SRC             S3C_CLKREG(0x1C)
+#define S3C_CLK_DIV0            S3C_CLKREG(0x20)
+#define S3C_CLK_DIV1            S3C_CLKREG(0x24)
+#define S3C_CLK_DIV2            S3C_CLKREG(0x28)
+#define S3C_CLK_OUT             S3C_CLKREG(0x2C)
+#define S3C_HCLK_GATE           S3C_CLKREG(0x30)
+#define S3C_PCLK_GATE           S3C_CLKREG(0x34)
+#define S3C_SCLK_GATE           S3C_CLKREG(0x38)
+
+/* CLKDIV0 */
+#define S3C6400_CLKDIV0_MFC_MASK        (0xf << 28)
+#define S3C6400_CLKDIV0_MFC_SHIFT       (28)
+#define S3C6400_CLKDIV0_JPEG_MASK       (0xf << 24)
+#define S3C6400_CLKDIV0_JPEG_SHIFT      (24)
+#define S3C6400_CLKDIV0_CAM_MASK        (0xf << 20)
+#define S3C6400_CLKDIV0_CAM_SHIFT       (20)
+#define S3C6400_CLKDIV0_SECURITY_MASK   (0x3 << 18)
+#define S3C6400_CLKDIV0_SECURITY_SHIFT  (18)
+#define S3C6400_CLKDIV0_PCLK_MASK       (0xf << 12)
+#define S3C6400_CLKDIV0_PCLK_SHIFT      (12)
+#define S3C6400_CLKDIV0_HCLK2_MASK      (0x7 << 9)
+#define S3C6400_CLKDIV0_HCLK2_SHIFT     (9)
+#define S3C6400_CLKDIV0_HCLK_MASK       (0x1 << 8)
+#define S3C6400_CLKDIV0_HCLK_SHIFT      (8)
+#define S3C6400_CLKDIV0_MPLL_MASK       (0x1 << 4)
+#define S3C6400_CLKDIV0_MPLL_SHIFT      (4)
+#define S3C6400_CLKDIV0_ARM_MASK        (0x3 << 0)
+#define S3C6410_CLKDIV0_ARM_MASK        (0x7 << 0)
+#define S3C6400_CLKDIV0_ARM_SHIFT       (0)
+
+/* CLKDIV1 */
+#define S3C6410_CLKDIV1_FIMC_MASK       (0xf << 24)
+#define S3C6410_CLKDIV1_FIMC_SHIFT      (24)
+#define S3C6400_CLKDIV1_UHOST_MASK      (0xf << 20)
+#define S3C6400_CLKDIV1_UHOST_SHIFT     (20)
+#define S3C6400_CLKDIV1_SCALER_MASK     (0xf << 16)
+#define S3C6400_CLKDIV1_SCALER_SHIFT    (16)
+#define S3C6400_CLKDIV1_LCD_MASK        (0xf << 12)
+#define S3C6400_CLKDIV1_LCD_SHIFT       (12)
+#define S3C6400_CLKDIV1_MMC2_MASK       (0xf << 8)
+#define S3C6400_CLKDIV1_MMC2_SHIFT      (8)
+#define S3C6400_CLKDIV1_MMC1_MASK       (0xf << 4)
+#define S3C6400_CLKDIV1_MMC1_SHIFT      (4)
+#define S3C6400_CLKDIV1_MMC0_MASK       (0xf << 0)
+#define S3C6400_CLKDIV1_MMC0_SHIFT      (0)
+
+/* CLKDIV2 */
+#define S3C6410_CLKDIV2_AUDIO2_MASK     (0xf << 24)
+#define S3C6410_CLKDIV2_AUDIO2_SHIFT    (24)
+#define S3C6400_CLKDIV2_IRDA_MASK       (0xf << 20)
+#define S3C6400_CLKDIV2_IRDA_SHIFT      (20)
+#define S3C6400_CLKDIV2_UART_MASK       (0xf << 16)
+#define S3C6400_CLKDIV2_UART_SHIFT      (16)
+#define S3C6400_CLKDIV2_AUDIO1_MASK     (0xf << 12)
+#define S3C6400_CLKDIV2_AUDIO1_SHIFT    (12)
+#define S3C6400_CLKDIV2_AUDIO0_MASK     (0xf << 8)
+#define S3C6400_CLKDIV2_AUDIO0_SHIFT    (8)
+#define S3C6400_CLKDIV2_SPI1_MASK       (0xf << 4)
+#define S3C6400_CLKDIV2_SPI1_SHIFT      (4)
+#define S3C6400_CLKDIV2_SPI0_MASK       (0xf << 0)
+#define S3C6400_CLKDIV2_SPI0_SHIFT      (0)
+
+/* HCLK GATE Registers */
+#define S3C_CLKCON_HCLK_BUS     (1<<30)
+#define S3C_CLKCON_HCLK_SECUR   (1<<29)
+#define S3C_CLKCON_HCLK_SDMA1   (1<<28)
+#define S3C_CLKCON_HCLK_SDMA2   (1<<27)
+#define S3C_CLKCON_HCLK_UHOST   (1<<26)
+#define S3C_CLKCON_HCLK_IROM    (1<<25)
+#define S3C_CLKCON_HCLK_DDR1    (1<<24)
+#define S3C_CLKCON_HCLK_DDR0    (1<<23)
+#define S3C_CLKCON_HCLK_MEM1    (1<<22)
+#define S3C_CLKCON_HCLK_MEM0    (1<<21)
+#define S3C_CLKCON_HCLK_USB     (1<<20)
+#define S3C_CLKCON_HCLK_HSMMC2  (1<<19)
+#define S3C_CLKCON_HCLK_HSMMC1  (1<<18)
+#define S3C_CLKCON_HCLK_HSMMC0  (1<<17)
+#define S3C_CLKCON_HCLK_MDP     (1<<16)
+#define S3C_CLKCON_HCLK_DHOST   (1<<15)
+#define S3C_CLKCON_HCLK_IHOST   (1<<14)
+#define S3C_CLKCON_HCLK_DMA1    (1<<13)
+#define S3C_CLKCON_HCLK_DMA0    (1<<12)
+#define S3C_CLKCON_HCLK_JPEG    (1<<11)
+#define S3C_CLKCON_HCLK_CAMIF   (1<<10)
+#define S3C_CLKCON_HCLK_SCALER  (1<<9)
+#define S3C_CLKCON_HCLK_2D      (1<<8)
+#define S3C_CLKCON_HCLK_TV      (1<<7)
+#define S3C_CLKCON_HCLK_POST0   (1<<5)
+#define S3C_CLKCON_HCLK_ROT     (1<<4)
+#define S3C_CLKCON_HCLK_LCD     (1<<3)
+#define S3C_CLKCON_HCLK_TZIC    (1<<2)
+#define S3C_CLKCON_HCLK_INTC    (1<<1)
+#define S3C_CLKCON_HCLK_MFC     (1<<0)
+
+/* PCLK GATE Registers */
+#define S3C6410_CLKCON_PCLK_I2C1        (1<<27)
+#define S3C6410_CLKCON_PCLK_IIS2        (1<<26)
+#define S3C_CLKCON_PCLK_SKEY            (1<<24)
+#define S3C_CLKCON_PCLK_CHIPID          (1<<23)
+#define S3C_CLKCON_PCLK_SPI1            (1<<22)
+#define S3C_CLKCON_PCLK_SPI0            (1<<21)
+#define S3C_CLKCON_PCLK_HSIRX           (1<<20)
+#define S3C_CLKCON_PCLK_HSITX           (1<<19)
+#define S3C_CLKCON_PCLK_GPIO            (1<<18)
+#define S3C_CLKCON_PCLK_IIC             (1<<17)
+#define S3C_CLKCON_PCLK_IIS1            (1<<16)
+#define S3C_CLKCON_PCLK_IIS0            (1<<15)
+#define S3C_CLKCON_PCLK_AC97            (1<<14)
+#define S3C_CLKCON_PCLK_TZPC            (1<<13)
+#define S3C_CLKCON_PCLK_TSADC           (1<<12)
+#define S3C_CLKCON_PCLK_KEYPAD          (1<<11)
+#define S3C_CLKCON_PCLK_IRDA            (1<<10)
+#define S3C_CLKCON_PCLK_PCM1            (1<<9)
+#define S3C_CLKCON_PCLK_PCM0            (1<<8)
+#define S3C_CLKCON_PCLK_PWM             (1<<7)
+#define S3C_CLKCON_PCLK_RTC             (1<<6)
+#define S3C_CLKCON_PCLK_WDT             (1<<5)
+#define S3C_CLKCON_PCLK_UART3           (1<<4)
+#define S3C_CLKCON_PCLK_UART2           (1<<3)
+#define S3C_CLKCON_PCLK_UART1           (1<<2)
+#define S3C_CLKCON_PCLK_UART0           (1<<1)
+#define S3C_CLKCON_PCLK_MFC             (1<<0)
+
+/* SCLK GATE Registers */
+#define S3C_CLKCON_SCLK_UHOST           (1<<30)
+#define S3C_CLKCON_SCLK_MMC2_48         (1<<29)
+#define S3C_CLKCON_SCLK_MMC1_48         (1<<28)
+#define S3C_CLKCON_SCLK_MMC0_48         (1<<27)
+#define S3C_CLKCON_SCLK_MMC2            (1<<26)
+#define S3C_CLKCON_SCLK_MMC1            (1<<25)
+#define S3C_CLKCON_SCLK_MMC0            (1<<24)
+#define S3C_CLKCON_SCLK_SPI1_48         (1<<23)
+#define S3C_CLKCON_SCLK_SPI0_48         (1<<22)
+#define S3C_CLKCON_SCLK_SPI1            (1<<21)
+#define S3C_CLKCON_SCLK_SPI0            (1<<20)
+#define S3C_CLKCON_SCLK_DAC27           (1<<19)
+#define S3C_CLKCON_SCLK_TV27            (1<<18)
+#define S3C_CLKCON_SCLK_SCALER27        (1<<17)
+#define S3C_CLKCON_SCLK_SCALER          (1<<16)
+#define S3C_CLKCON_SCLK_LCD27           (1<<15)
+#define S3C_CLKCON_SCLK_LCD             (1<<14)
+#define S3C6400_CLKCON_SCLK_POST1_27    (1<<13)
+#define S3C6410_CLKCON_FIMC             (1<<13)
+#define S3C_CLKCON_SCLK_POST0_27        (1<<12)
+#define S3C6400_CLKCON_SCLK_POST1       (1<<11)
+#define S3C6410_CLKCON_SCLK_AUDIO2      (1<<11)
+#define S3C_CLKCON_SCLK_POST0           (1<<10)
+#define S3C_CLKCON_SCLK_AUDIO1          (1<<9)
+#define S3C_CLKCON_SCLK_AUDIO0          (1<<8)
+#define S3C_CLKCON_SCLK_SECUR           (1<<7)
+#define S3C_CLKCON_SCLK_IRDA            (1<<6)
+#define S3C_CLKCON_SCLK_UART            (1<<5)
+#define S3C_CLKCON_SCLK_ONENAND         (1<<4)
+#define S3C_CLKCON_SCLK_MFC             (1<<3)
+#define S3C_CLKCON_SCLK_CAM             (1<<2)
+#define S3C_CLKCON_SCLK_JPEG            (1<<1)
+
+/* CLKSRC */
+
+#define S3C6400_CLKSRC_APLL_MOUT        (1 << 0)
+#define S3C6400_CLKSRC_MPLL_MOUT        (1 << 1)
+#define S3C6400_CLKSRC_EPLL_MOUT        (1 << 2)
+#define S3C6400_CLKSRC_APLL_MOUT_SHIFT  (0)
+#define S3C6400_CLKSRC_MPLL_MOUT_SHIFT  (1)
+#define S3C6400_CLKSRC_EPLL_MOUT_SHIFT  (2)
+#define S3C6400_CLKSRC_MFC              (1 << 4)
+
+#define S3C6410_CLKSRC_TV27_MASK        (0x1 << 31)
+#define S3C6410_CLKSRC_TV27_SHIFT       (31)
+#define S3C6410_CLKSRC_DAC27_MASK       (0x1 << 30)
+#define S3C6410_CLKSRC_DAC27_SHIFT      (30)
+#define S3C6400_CLKSRC_SCALER_MASK      (0x3 << 28)
+#define S3C6400_CLKSRC_SCALER_SHIFT     (28)
+#define S3C6400_CLKSRC_LCD_MASK         (0x3 << 26)
+#define S3C6400_CLKSRC_LCD_SHIFT        (26)
+#define S3C6400_CLKSRC_IRDA_MASK        (0x3 << 24)
+#define S3C6400_CLKSRC_IRDA_SHIFT       (24)
+#define S3C6400_CLKSRC_MMC2_MASK        (0x3 << 22)
+#define S3C6400_CLKSRC_MMC2_SHIFT       (22)
+#define S3C6400_CLKSRC_MMC1_MASK        (0x3 << 20)
+#define S3C6400_CLKSRC_MMC1_SHIFT       (20)
+#define S3C6400_CLKSRC_MMC0_MASK        (0x3 << 18)
+#define S3C6400_CLKSRC_MMC0_SHIFT       (18)
+#define S3C6400_CLKSRC_SPI1_MASK        (0x3 << 16)
+#define S3C6400_CLKSRC_SPI1_SHIFT       (16)
+#define S3C6400_CLKSRC_SPI0_MASK        (0x3 << 14)
+#define S3C6400_CLKSRC_SPI0_SHIFT       (14)
+#define S3C6400_CLKSRC_UART_MASK        (0x1 << 13)
+#define S3C6400_CLKSRC_UART_SHIFT       (13)
+#define S3C6400_CLKSRC_AUDIO1_MASK      (0x7 << 10)
+#define S3C6400_CLKSRC_AUDIO1_SHIFT     (10)
+#define S3C6400_CLKSRC_AUDIO0_MASK      (0x7 << 7)
+#define S3C6400_CLKSRC_AUDIO0_SHIFT     (7)
+#define S3C6400_CLKSRC_UHOST_MASK       (0x3 << 5)
+#define S3C6400_CLKSRC_UHOST_SHIFT      (5)
+
+
+#endif /* _PLAT_REGS_CLOCK_H */
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h b/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h
new file mode 100644
index 000000000000..75b873d82808
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h
@@ -0,0 +1,35 @@
+/* linux/arch/arm/plat-s3c64xx/include/mach/regs-gpio.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - GPIO register definitions
+ */
+
+#ifndef __ASM_PLAT_S3C64XX_REGS_GPIO_H
+#define __ASM_PLAT_S3C64XX_REGS_GPIO_H __FILE__
+
+/* Base addresses for each of the banks */
+
+#define S3C64XX_GPA_BASE        (S3C64XX_VA_GPIO + 0x0000)
+#define S3C64XX_GPB_BASE        (S3C64XX_VA_GPIO + 0x0020)
+#define S3C64XX_GPC_BASE        (S3C64XX_VA_GPIO + 0x0040)
+#define S3C64XX_GPD_BASE        (S3C64XX_VA_GPIO + 0x0060)
+#define S3C64XX_GPE_BASE        (S3C64XX_VA_GPIO + 0x0080)
+#define S3C64XX_GPF_BASE        (S3C64XX_VA_GPIO + 0x00A0)
+#define S3C64XX_GPG_BASE        (S3C64XX_VA_GPIO + 0x00C0)
+#define S3C64XX_GPH_BASE        (S3C64XX_VA_GPIO + 0x00E0)
+#define S3C64XX_GPI_BASE        (S3C64XX_VA_GPIO + 0x0100)
+#define S3C64XX_GPJ_BASE        (S3C64XX_VA_GPIO + 0x0120)
+#define S3C64XX_GPK_BASE        (S3C64XX_VA_GPIO + 0x0800)
+#define S3C64XX_GPL_BASE        (S3C64XX_VA_GPIO + 0x0810)
+#define S3C64XX_GPM_BASE        (S3C64XX_VA_GPIO + 0x0820)
+#define S3C64XX_GPN_BASE        (S3C64XX_VA_GPIO + 0x0830)
+#define S3C64XX_GPO_BASE        (S3C64XX_VA_GPIO + 0x0140)
+#define S3C64XX_GPP_BASE        (S3C64XX_VA_GPIO + 0x0160)
+#define S3C64XX_GPQ_BASE        (S3C64XX_VA_GPIO + 0x0180)
+
+#endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_H */
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-sys.h b/arch/arm/plat-s3c64xx/include/plat/regs-sys.h
new file mode 100644
index 000000000000..d8ed82917096
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/regs-sys.h
@@ -0,0 +1,24 @@
+/* arch/arm/plat-s3c64xx/include/plat/regs-sys.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX system register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_REGS_SYS_H
+#define __PLAT_REGS_SYS_H __FILE__
+
+#define S3C_SYSREG(x)           (S3C_VA_SYS + (x))
+
+#define S3C64XX_OTHERS          S3C_SYSREG(0x900)
+
+#define S3C64XX_OTHERS_USBMASK  (1 << 16)
+
+#endif /* _PLAT_REGS_SYS_H */
diff --git a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h b/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
new file mode 100644
index 000000000000..571eaa2e54f1
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
@@ -0,0 +1,35 @@
+/* arch/arm/plat-s3c64xx/include/plat/s3c6400.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * Header file for s3c6400 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S3C6400 related SoCs */
+
+extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c6400_register_clocks(void);
+extern void s3c6400_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S3C6400
+
+extern  int s3c6400_init(void);
+extern void s3c6400_map_io(void);
+extern void s3c6400_init_clocks(int xtal);
+
+#define s3c6400_init_uarts s3c6400_common_init_uarts
+
+#else
+#define s3c6400_init_clocks NULL
+#define s3c6400_init_uarts NULL
+#define s3c6400_map_io NULL
+#define s3c6400_init NULL
+#endif
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/s3c6410.h b/arch/arm/plat-s3c64xx/include/plat/s3c6410.h
new file mode 100644
index 000000000000..50dcdd6f6800
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/s3c6410.h
@@ -0,0 +1,29 @@
+/* arch/arm/plat-s3c64xx/include/plat/s3c6410.h
+ *
+ * Copyright 2008 Openmoko,  Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * Header file for s3c6410 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C6410
+
+extern  int s3c6410_init(void);
+extern void s3c6410_init_irq(void);
+extern void s3c6410_map_io(void);
+extern void s3c6410_init_clocks(int xtal);
+
+#define s3c6410_init_uarts s3c6400_common_init_uarts
+
+#else
+#define s3c6410_init_clocks NULL
+#define s3c6410_init_uarts NULL
+#define s3c6410_map_io NULL
+#define s3c6410_init NULL
+#endif
diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c
new file mode 100644
index 000000000000..1f7cc0067f5c
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/irq-eint.c
@@ -0,0 +1,202 @@
+/* arch/arm/plat-s3c64xx/irq-eint.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Interrupt handling for IRQ_EINT(x)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/vic.h>
+
+#include <plat/regs-irqtype.h>
+
+#include <mach/map.h>
+#include <plat/cpu.h>
+
+/* GPIO is 0x7F008xxx, */
+#define S3C64XX_GPIOREG(x)      (S3C64XX_VA_GPIO + (x))
+
+#define S3C64XX_EINT0CON0       S3C64XX_GPIOREG(0x900)
+#define S3C64XX_EINT0CON1       S3C64XX_GPIOREG(0x904)
+#define S3C64XX_EINT0FLTCON0    S3C64XX_GPIOREG(0x910)
+#define S3C64XX_EINT0FLTCON1    S3C64XX_GPIOREG(0x914)
+#define S3C64XX_EINT0FLTCON2    S3C64XX_GPIOREG(0x918)
+#define S3C64XX_EINT0FLTCON3    S3C64XX_GPIOREG(0x91C)
+
+#define S3C64XX_EINT0MASK       S3C64XX_GPIOREG(0x920)
+#define S3C64XX_EINT0PEND       S3C64XX_GPIOREG(0x924)
+
+
+#define eint_offset(irq)        ((irq) - IRQ_EINT(0))
+#define eint_irq_to_bit(irq)    (1 << eint_offset(irq))
+
+static inline void s3c_irq_eint_mask(unsigned int irq)
+{
+        u32 mask;
+
+        mask = __raw_readl(S3C64XX_EINT0MASK);
+        mask |= eint_irq_to_bit(irq);
+        __raw_writel(mask, S3C64XX_EINT0MASK);
+}
+
+static void s3c_irq_eint_unmask(unsigned int irq)
+{
+        u32 mask;
+
+        mask = __raw_readl(S3C64XX_EINT0MASK);
+        mask |= eint_irq_to_bit(irq);
+        __raw_writel(mask, S3C64XX_EINT0MASK);
+}
+
+static inline void s3c_irq_eint_ack(unsigned int irq)
+{
+        __raw_writel(eint_irq_to_bit(irq), S3C64XX_EINT0PEND);
+}
+
+static void s3c_irq_eint_maskack(unsigned int irq)
+{
+        /* compiler should in-line these */
+        s3c_irq_eint_mask(irq);
+        s3c_irq_eint_ack(irq);
+}
+
+static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
+{
+        int offs = eint_offset(irq);
+        int shift;
+        u32 ctrl, mask;
+        u32 newvalue = 0;
+        void __iomem *reg;
+
+        if (offs > 27)
+                return -EINVAL;
+
+        if (offs <= 15)
+                reg = S3C64XX_EINT0CON0;
+        else
+                reg = S3C64XX_EINT0CON1;
+
+        switch (type) {
+        case IRQ_TYPE_NONE:
+                printk(KERN_WARNING "No edge setting!\n");
+                break;
+
+        case IRQ_TYPE_EDGE_RISING:
+                newvalue = S3C2410_EXTINT_RISEEDGE;
+                break;
+
+        case IRQ_TYPE_EDGE_FALLING:
+                newvalue = S3C2410_EXTINT_FALLEDGE;
+                break;
+
+        case IRQ_TYPE_EDGE_BOTH:
+                newvalue = S3C2410_EXTINT_BOTHEDGE;
+                break;
+
+        case IRQ_TYPE_LEVEL_LOW:
+                newvalue = S3C2410_EXTINT_LOWLEV;
+                break;
+
+        case IRQ_TYPE_LEVEL_HIGH:
+                newvalue = S3C2410_EXTINT_HILEV;
+                break;
+
+        default:
+                printk(KERN_ERR "No such irq type %d", type);
+                return -1;
+        }
+
+        shift = (offs / 2) * 4;
+        mask = 0x7 << shift;
+
+        ctrl = __raw_readl(reg);
+        ctrl &= ~mask;
+        ctrl |= newvalue << shift;
+        __raw_writel(ctrl, reg);
+
+        return 0;
+}
+
+static struct irq_chip s3c_irq_eint = {
+        .name           = "s3c-eint",
+        .mask           = s3c_irq_eint_mask,
+        .unmask         = s3c_irq_eint_unmask,
+        .mask_ack       = s3c_irq_eint_maskack,
+        .ack            = s3c_irq_eint_ack,
+        .set_type       = s3c_irq_eint_set_type,
+};
+
+/* s3c_irq_demux_eint
+ *
+ * This function demuxes the IRQ from the group0 external interrupts,
+ * from IRQ_EINT(0) to IRQ_EINT(27). It is designed to be inlined into
+ * the specific handlers s3c_irq_demux_eintX_Y.
+ */
+static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
+{
+        u32 status = __raw_readl(S3C64XX_EINT0PEND);
+        u32 mask = __raw_readl(S3C64XX_EINT0MASK);
+        unsigned int irq;
+
+        status &= ~mask;
+        status >>= start;
+        status &= (1 << (end - start + 1)) - 1;
+
+        for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
+                if (status & 1)
+                        generic_handle_irq(irq);
+
+                status >>= 1;
+        }
+}
+
+static void s3c_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
+{
+        s3c_irq_demux_eint(0, 3);
+}
+
+static void s3c_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc)
+{
+        s3c_irq_demux_eint(4, 11);
+}
+
+static void s3c_irq_demux_eint12_19(unsigned int irq, struct irq_desc *desc)
+{
+        s3c_irq_demux_eint(12, 19);
+}
+
+static void s3c_irq_demux_eint20_27(unsigned int irq, struct irq_desc *desc)
+{
+        s3c_irq_demux_eint(20, 27);
+}
+
+int __init s3c64xx_init_irq_eint(void)
+{
+        int irq;
+
+        for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
+                set_irq_chip(irq, &s3c_irq_eint);
+                set_irq_handler(irq, handle_level_irq);
+                set_irq_flags(irq, IRQF_VALID);
+        }
+
+        set_irq_chained_handler(IRQ_EINT0_3, s3c_irq_demux_eint0_3);
+        set_irq_chained_handler(IRQ_EINT4_11, s3c_irq_demux_eint4_11);
+        set_irq_chained_handler(IRQ_EINT12_19, s3c_irq_demux_eint12_19);
+        set_irq_chained_handler(IRQ_EINT20_27, s3c_irq_demux_eint20_27);
+
+        return 0;
+}
+
+arch_initcall(s3c64xx_init_irq_eint);
diff --git a/arch/arm/plat-s3c64xx/irq.c b/arch/arm/plat-s3c64xx/irq.c
new file mode 100644
index 000000000000..a94f1d5e819d
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/irq.c
@@ -0,0 +1,257 @@
+/* arch/arm/plat-s3c64xx/irq.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Interrupt handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+#include <plat/regs-timer.h>
+#include <plat/cpu.h>
+
+/* Timer interrupt handling */
+
+static void s3c_irq_demux_timer(unsigned int base_irq, unsigned int sub_irq)
+{
+        generic_handle_irq(sub_irq);
+}
+
+static void s3c_irq_demux_timer0(unsigned int irq, struct irq_desc *desc)
+{
+        s3c_irq_demux_timer(irq, IRQ_TIMER0);
+}
+
+static void s3c_irq_demux_timer1(unsigned int irq, struct irq_desc *desc)
+{
+        s3c_irq_demux_timer(irq, IRQ_TIMER1);
+}
+
+static void s3c_irq_demux_timer2(unsigned int irq, struct irq_desc *desc)
+{
+        s3c_irq_demux_timer(irq, IRQ_TIMER2);
+}
+
+static void s3c_irq_demux_timer3(unsigned int irq, struct irq_desc *desc)
+{
+        s3c_irq_demux_timer(irq, IRQ_TIMER3);
+}
+
+static void s3c_irq_demux_timer4(unsigned int irq, struct irq_desc *desc)
+{
+        s3c_irq_demux_timer(irq, IRQ_TIMER4);
+}
+
+/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
+
+static void s3c_irq_timer_mask(unsigned int irq)
+{
+        u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+        reg &= 0x1f;  /* mask out pending interrupts */
+        reg &= ~(1 << (irq - IRQ_TIMER0));
+        __raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static void s3c_irq_timer_unmask(unsigned int irq)
+{
+        u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+        reg &= 0x1f;  /* mask out pending interrupts */
+        reg |= 1 << (irq - IRQ_TIMER0);
+        __raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static void s3c_irq_timer_ack(unsigned int irq)
+{
+        u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+        reg &= 0x1f;
+        reg |= (1 << 5) << (irq - IRQ_TIMER0);
+        __raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static struct irq_chip s3c_irq_timer = {
+        .name           = "s3c-timer",
+        .mask           = s3c_irq_timer_mask,
+        .unmask         = s3c_irq_timer_unmask,
+        .ack            = s3c_irq_timer_ack,
+};
+
+struct uart_irq {
+        void __iomem    *regs;
+        unsigned int     base_irq;
+        unsigned int     parent_irq;
+};
+
+/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
+ * are consecutive when looking up the interrupt in the demux routines.
+ */
+static struct uart_irq uart_irqs[] = {
+        [0] = {
+                .regs           = S3C_VA_UART0,
+                .base_irq       = IRQ_S3CUART_BASE0,
+                .parent_irq     = IRQ_UART0,
+        },
+        [1] = {
+                .regs           = S3C_VA_UART1,
+                .base_irq       = IRQ_S3CUART_BASE1,
+                .parent_irq     = IRQ_UART1,
+        },
+        [2] = {
+                .regs           = S3C_VA_UART2,
+                .base_irq       = IRQ_S3CUART_BASE2,
+                .parent_irq     = IRQ_UART2,
+        },
+        [3] = {
+                .regs           = S3C_VA_UART3,
+                .base_irq       = IRQ_S3CUART_BASE3,
+                .parent_irq     = IRQ_UART3,
+        },
+};
+
+static inline void __iomem *s3c_irq_uart_base(unsigned int irq)
+{
+        struct uart_irq *uirq = get_irq_chip_data(irq);
+        return uirq->regs;
+}
+
+static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
+{
+        return irq & 3;
+}
+
+/* UART interrupt registers, not worth adding to seperate include header */
+#define S3C64XX_UINTP   0x30
+#define S3C64XX_UINTSP  0x34
+#define S3C64XX_UINTM   0x38
+
+static void s3c_irq_uart_mask(unsigned int irq)
+{
+        void __iomem *regs = s3c_irq_uart_base(irq);
+        unsigned int bit = s3c_irq_uart_bit(irq);
+        u32 reg;
+
+        reg = __raw_readl(regs + S3C64XX_UINTM);
+        reg |= (1 << bit);
+        __raw_writel(reg, regs + S3C64XX_UINTM);
+}
+
+static void s3c_irq_uart_maskack(unsigned int irq)
+{
+        void __iomem *regs = s3c_irq_uart_base(irq);
+        unsigned int bit = s3c_irq_uart_bit(irq);
+        u32 reg;
+
+        reg = __raw_readl(regs + S3C64XX_UINTM);
+        reg |= (1 << bit);
+        __raw_writel(reg, regs + S3C64XX_UINTM);
+        __raw_writel(1 << bit, regs + S3C64XX_UINTP);
+}
+
+static void s3c_irq_uart_unmask(unsigned int irq)
+{
+        void __iomem *regs = s3c_irq_uart_base(irq);
+        unsigned int bit = s3c_irq_uart_bit(irq);
+        u32 reg;
+
+        reg = __raw_readl(regs + S3C64XX_UINTM);
+        reg &= ~(1 << bit);
+        __raw_writel(reg, regs + S3C64XX_UINTM);
+}
+
+static void s3c_irq_uart_ack(unsigned int irq)
+{
+        void __iomem *regs = s3c_irq_uart_base(irq);
+        unsigned int bit = s3c_irq_uart_bit(irq);
+
+        __raw_writel(1 << bit, regs + S3C64XX_UINTP);
+}
+
+static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
+{
+        struct uart_irq *uirq = &uart_irqs[irq - IRQ_UART0];
+        u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
+        int base = uirq->base_irq;
+
+        if (pend & (1 << 0))
+                generic_handle_irq(base);
+        if (pend & (1 << 1))
+                generic_handle_irq(base + 1);
+        if (pend & (1 << 2))
+                generic_handle_irq(base + 2);
+        if (pend & (1 << 3))
+                generic_handle_irq(base + 3);
+}
+
+static struct irq_chip s3c_irq_uart = {
+        .name           = "s3c-uart",
+        .mask           = s3c_irq_uart_mask,
+        .unmask         = s3c_irq_uart_unmask,
+        .mask_ack       = s3c_irq_uart_maskack,
+        .ack            = s3c_irq_uart_ack,
+};
+
+static void __init s3c64xx_uart_irq(struct uart_irq *uirq)
+{
+        void *reg_base = uirq->regs;
+        unsigned int irq;
+        int offs;
+
+        /* mask all interrupts at the start. */
+        __raw_writel(0xf, reg_base + S3C64XX_UINTM);
+
+        for (offs = 0; offs < 3; offs++) {
+                irq = uirq->base_irq + offs;
+
+                set_irq_chip(irq, &s3c_irq_uart);
+                set_irq_chip_data(irq, uirq);
+                set_irq_handler(irq, handle_level_irq);
+                set_irq_flags(irq, IRQF_VALID);
+        }
+
+        set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
+}
+
+void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
+{
+        int uart, irq;
+
+        printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
+
+        /* initialise the pair of VICs */
+        vic_init(S3C_VA_VIC0, S3C_VIC0_BASE, vic0_valid);
+        vic_init(S3C_VA_VIC1, S3C_VIC1_BASE, vic1_valid);
+
+        /* add the timer sub-irqs */
+
+        set_irq_chained_handler(IRQ_TIMER0_VIC, s3c_irq_demux_timer0);
+        set_irq_chained_handler(IRQ_TIMER1_VIC, s3c_irq_demux_timer1);
+        set_irq_chained_handler(IRQ_TIMER2_VIC, s3c_irq_demux_timer2);
+        set_irq_chained_handler(IRQ_TIMER3_VIC, s3c_irq_demux_timer3);
+        set_irq_chained_handler(IRQ_TIMER4_VIC, s3c_irq_demux_timer4);
+
+        for (irq = IRQ_TIMER0; irq <= IRQ_TIMER4; irq++) {
+                set_irq_chip(irq, &s3c_irq_timer);
+                set_irq_handler(irq, handle_level_irq);
+                set_irq_flags(irq, IRQF_VALID);
+        }
+
+        for (uart = 0; uart < ARRAY_SIZE(uart_irqs); uart++)
+                s3c64xx_uart_irq(&uart_irqs[uart]);
+}
+
+
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
new file mode 100644
index 000000000000..8d9a0cada668
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -0,0 +1,655 @@
+/* linux/arch/arm/plat-s3c64xx/s3c6400-clock.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 based common clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/cpu-freq.h>
+
+#include <plat/regs-clock.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+
+/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
+ * ext_xtal_mux for want of an actual name from the manual.
+*/
+
+struct clk clk_ext_xtal_mux = {
+        .name           = "ext_xtal",
+        .id             = -1,
+};
+
+#define clk_fin_apll clk_ext_xtal_mux
+#define clk_fin_mpll clk_ext_xtal_mux
+#define clk_fin_epll clk_ext_xtal_mux
+
+#define clk_fout_mpll   clk_mpll
+
+struct clk_sources {
+        unsigned int    nr_sources;
+        struct clk      **sources;
+};
+
+struct clksrc_clk {
+        struct clk              clk;
+        unsigned int            mask;
+        unsigned int            shift;
+
+        struct clk_sources      *sources;
+
+        unsigned int            divider_shift;
+        void __iomem            *reg_divider;
+};
+
+struct clk clk_fout_apll = {
+        .name           = "fout_apll",
+        .id             = -1,
+};
+
+static struct clk *clk_src_apll_list[] = {
+        [0] = &clk_fin_apll,
+        [1] = &clk_fout_apll,
+};
+
+static struct clk_sources clk_src_apll = {
+        .sources        = clk_src_apll_list,
+        .nr_sources     = ARRAY_SIZE(clk_src_apll_list),
+};
+
+struct clksrc_clk clk_mout_apll = {
+        .clk    = {
+                .name           = "mout_apll",
+                .id             = -1,
+        },
+        .shift          = S3C6400_CLKSRC_APLL_MOUT_SHIFT,
+        .mask           = S3C6400_CLKSRC_APLL_MOUT,
+        .sources        = &clk_src_apll,
+};
+
+struct clk clk_fout_epll = {
+        .name           = "fout_epll",
+        .id             = -1,
+};
+
+static struct clk *clk_src_epll_list[] = {
+        [0] = &clk_fin_epll,
+        [1] = &clk_fout_epll,
+};
+
+static struct clk_sources clk_src_epll = {
+        .sources        = clk_src_epll_list,
+        .nr_sources     = ARRAY_SIZE(clk_src_epll_list),
+};
+
+struct clksrc_clk clk_mout_epll = {
+        .clk    = {
+                .name           = "mout_epll",
+                .id             = -1,
+        },
+        .shift          = S3C6400_CLKSRC_EPLL_MOUT_SHIFT,
+        .mask           = S3C6400_CLKSRC_EPLL_MOUT,
+        .sources        = &clk_src_epll,
+};
+
+static struct clk *clk_src_mpll_list[] = {
+        [0] = &clk_fin_mpll,
+        [1] = &clk_fout_mpll,
+};
+
+static struct clk_sources clk_src_mpll = {
+        .sources        = clk_src_mpll_list,
+        .nr_sources     = ARRAY_SIZE(clk_src_mpll_list),
+};
+
+struct clksrc_clk clk_mout_mpll = {
+        .clk = {
+                .name           = "mout_mpll",
+                .id             = -1,
+        },
+        .shift          = S3C6400_CLKSRC_MPLL_MOUT_SHIFT,
+        .mask           = S3C6400_CLKSRC_MPLL_MOUT,
+        .sources        = &clk_src_mpll,
+};
+
+static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
+{
+        unsigned long rate = clk_get_rate(clk->parent);
+
+        printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+        if (__raw_readl(S3C_CLK_DIV0) & S3C6400_CLKDIV0_MPLL_MASK)
+                rate /= 2;
+
+        return rate;
+}
+
+struct clk clk_dout_mpll = {
+        .name           = "dout_mpll",
+        .id             = -1,
+        .parent         = &clk_mout_mpll.clk,
+        .get_rate       = s3c64xx_clk_doutmpll_get_rate,
+};
+
+static struct clk *clkset_spi_mmc_list[] = {
+        &clk_mout_epll.clk,
+        &clk_dout_mpll,
+        &clk_fin_epll,
+        &clk_27m,
+};
+
+static struct clk_sources clkset_spi_mmc = {
+        .sources        = clkset_spi_mmc_list,
+        .nr_sources     = ARRAY_SIZE(clkset_spi_mmc_list),
+};
+
+static struct clk *clkset_irda_list[] = {
+        &clk_mout_epll.clk,
+        &clk_dout_mpll,
+        NULL,
+        &clk_27m,
+};
+
+static struct clk_sources clkset_irda = {
+        .sources        = clkset_irda_list,
+        .nr_sources     = ARRAY_SIZE(clkset_irda_list),
+};
+
+static struct clk *clkset_uart_list[] = {
+        &clk_mout_epll.clk,
+        &clk_dout_mpll,
+        NULL,
+        NULL
+};
+
+static struct clk_sources clkset_uart = {
+        .sources        = clkset_uart_list,
+        .nr_sources     = ARRAY_SIZE(clkset_uart_list),
+};
+
+static struct clk *clkset_uhost_list[] = {
+        &clk_mout_epll.clk,
+        &clk_dout_mpll,
+        &clk_fin_epll,
+        &clk_48m,
+};
+
+static struct clk_sources clkset_uhost = {
+        .sources        = clkset_uhost_list,
+        .nr_sources     = ARRAY_SIZE(clkset_uhost_list),
+};
+
+
+/* The peripheral clocks are all controlled via clocksource followed
+ * by an optional divider and gate stage. We currently roll this into
+ * one clock which hides the intermediate clock from the mux.
+ *
+ * Note, the JPEG clock can only be an even divider...
+ *
+ * The scaler and LCD clocks depend on the S3C64XX version, and also
+ * have a common parent divisor so are not included here.
+ */
+
+static inline struct clksrc_clk *to_clksrc(struct clk *clk)
+{
+        return container_of(clk, struct clksrc_clk, clk);
+}
+
+static unsigned long s3c64xx_getrate_clksrc(struct clk *clk)
+{
+        struct clksrc_clk *sclk = to_clksrc(clk);
+        unsigned long rate = clk_get_rate(clk->parent);
+        u32 clkdiv = __raw_readl(sclk->reg_divider);
+
+        clkdiv >>= sclk->divider_shift;
+        clkdiv &= 0xf;
+        clkdiv++;
+
+        rate /= clkdiv;
+        return rate;
+}
+
+static int s3c64xx_setrate_clksrc(struct clk *clk, unsigned long rate)
+{
+        struct clksrc_clk *sclk = to_clksrc(clk);
+        void __iomem *reg = sclk->reg_divider;
+        unsigned int div;
+        u32 val;
+
+        rate = clk_round_rate(clk, rate);
+        div = clk_get_rate(clk->parent) / rate;
+
+        val = __raw_readl(reg);
+        val &= ~sclk->mask;
+        val |= (rate - 1) << sclk->shift;
+        __raw_writel(val, reg);
+
+        return 0;
+}
+
+static int s3c64xx_setparent_clksrc(struct clk *clk, struct clk *parent)
+{
+        struct clksrc_clk *sclk = to_clksrc(clk);
+        struct clk_sources *srcs = sclk->sources;
+        u32 clksrc = __raw_readl(S3C_CLK_SRC);
+        int src_nr = -1;
+        int ptr;
+
+        for (ptr = 0; ptr < srcs->nr_sources; ptr++)
+                if (srcs->sources[ptr] == parent) {
+                        src_nr = ptr;
+                        break;
+                }
+
+        if (src_nr >= 0) {
+                clksrc &= ~sclk->mask;
+                clksrc |= src_nr << sclk->shift;
+
+                __raw_writel(clksrc, S3C_CLK_SRC);
+                return 0;
+        }
+
+        return -EINVAL;
+}
+
+static unsigned long s3c64xx_roundrate_clksrc(struct clk *clk,
+                                              unsigned long rate)
+{
+        unsigned long parent_rate = clk_get_rate(clk->parent);
+        int div;
+
+        if (rate > parent_rate)
+                rate = parent_rate;
+        else {
+                div = rate / parent_rate;
+
+                if (div == 0)
+                        div = 1;
+                if (div > 16)
+                        div = 16;
+
+                rate = parent_rate / div;
+        }
+
+        return rate;
+}
+
+static struct clksrc_clk clk_mmc0 = {
+        .clk    = {
+                .name           = "mmc_bus",
+                .id             = 0,
+                .ctrlbit        = S3C_CLKCON_SCLK_MMC0,
+                .enable         = s3c64xx_sclk_ctrl,
+                .set_parent     = s3c64xx_setparent_clksrc,
+                .get_rate       = s3c64xx_getrate_clksrc,
+                .set_rate       = s3c64xx_setrate_clksrc,
+                .round_rate     = s3c64xx_roundrate_clksrc,
+        },
+        .shift          = S3C6400_CLKSRC_MMC0_SHIFT,
+        .mask           = S3C6400_CLKSRC_MMC0_MASK,
+        .sources        = &clkset_spi_mmc,
+        .divider_shift  = S3C6400_CLKDIV1_MMC0_SHIFT,
+        .reg_divider    = S3C_CLK_DIV1,
+};
+
+static struct clksrc_clk clk_mmc1 = {
+        .clk    = {
+                .name           = "mmc_bus",
+                .id             = 1,
+                .ctrlbit        = S3C_CLKCON_SCLK_MMC1,
+                .enable         = s3c64xx_sclk_ctrl,
+                .get_rate       = s3c64xx_getrate_clksrc,
+                .set_rate       = s3c64xx_setrate_clksrc,
+                .set_parent     = s3c64xx_setparent_clksrc,
+                .round_rate     = s3c64xx_roundrate_clksrc,
+        },
+        .shift          = S3C6400_CLKSRC_MMC1_SHIFT,
+        .mask           = S3C6400_CLKSRC_MMC1_MASK,
+        .sources        = &clkset_spi_mmc,
+        .divider_shift  = S3C6400_CLKDIV1_MMC1_SHIFT,
+        .reg_divider    = S3C_CLK_DIV1,
+};
+
+static struct clksrc_clk clk_mmc2 = {
+        .clk    = {
+                .name           = "mmc_bus",
+                .id             = 2,
+                .ctrlbit        = S3C_CLKCON_SCLK_MMC2,
+                .enable         = s3c64xx_sclk_ctrl,
+                .get_rate       = s3c64xx_getrate_clksrc,
+                .set_rate       = s3c64xx_setrate_clksrc,
+                .set_parent     = s3c64xx_setparent_clksrc,
+                .round_rate     = s3c64xx_roundrate_clksrc,
+        },
+        .shift          = S3C6400_CLKSRC_MMC2_SHIFT,
+        .mask           = S3C6400_CLKSRC_MMC2_MASK,
+        .sources        = &clkset_spi_mmc,
+        .divider_shift  = S3C6400_CLKDIV1_MMC2_SHIFT,
+        .reg_divider    = S3C_CLK_DIV1,
+};
+
+static struct clksrc_clk clk_usbhost = {
+        .clk    = {
+                .name           = "usb-host-bus",
+                .id             = -1,
+                .ctrlbit        = S3C_CLKCON_SCLK_UHOST,
+                .enable         = s3c64xx_sclk_ctrl,
+                .set_parent     = s3c64xx_setparent_clksrc,
+                .get_rate       = s3c64xx_getrate_clksrc,
+                .set_rate       = s3c64xx_setrate_clksrc,
+                .round_rate     = s3c64xx_roundrate_clksrc,
+        },
+        .shift          = S3C6400_CLKSRC_UHOST_SHIFT,
+        .mask           = S3C6400_CLKSRC_UHOST_MASK,
+        .sources        = &clkset_uhost,
+        .divider_shift  = S3C6400_CLKDIV1_UHOST_SHIFT,
+        .reg_divider    = S3C_CLK_DIV1,
+};
+
+static struct clksrc_clk clk_uart_uclk1 = {
+        .clk    = {
+                .name           = "uclk1",
+                .id             = -1,
+                .ctrlbit        = S3C_CLKCON_SCLK_UART,
+                .enable         = s3c64xx_sclk_ctrl,
+                .set_parent     = s3c64xx_setparent_clksrc,
+                .get_rate       = s3c64xx_getrate_clksrc,
+                .set_rate       = s3c64xx_setrate_clksrc,
+                .round_rate     = s3c64xx_roundrate_clksrc,
+        },
+        .shift          = S3C6400_CLKSRC_UART_SHIFT,
+        .mask           = S3C6400_CLKSRC_UART_MASK,
+        .sources        = &clkset_uart,
+        .divider_shift  = S3C6400_CLKDIV2_UART_SHIFT,
+        .reg_divider    = S3C_CLK_DIV2,
+};
+
+/* Where does UCLK0 come from? */
+
+static struct clksrc_clk clk_spi0 = {
+        .clk    = {
+                .name           = "spi-bus",
+                .id             = 0,
+                .ctrlbit        = S3C_CLKCON_SCLK_SPI0,
+                .enable         = s3c64xx_sclk_ctrl,
+                .set_parent     = s3c64xx_setparent_clksrc,
+                .get_rate       = s3c64xx_getrate_clksrc,
+                .set_rate       = s3c64xx_setrate_clksrc,
+                .round_rate     = s3c64xx_roundrate_clksrc,
+        },
+        .shift          = S3C6400_CLKSRC_SPI0_SHIFT,
+        .mask           = S3C6400_CLKSRC_SPI0_MASK,
+        .sources        = &clkset_spi_mmc,
+        .divider_shift  = S3C6400_CLKDIV2_SPI0_SHIFT,
+        .reg_divider    = S3C_CLK_DIV2,
+};
+
+static struct clksrc_clk clk_spi1 = {
+        .clk    = {
+                .name           = "spi-bus",
+                .id             = 1,
+                .ctrlbit        = S3C_CLKCON_SCLK_SPI1,
+                .enable         = s3c64xx_sclk_ctrl,
+                .set_parent     = s3c64xx_setparent_clksrc,
+                .get_rate       = s3c64xx_getrate_clksrc,
+                .set_rate       = s3c64xx_setrate_clksrc,
+                .round_rate     = s3c64xx_roundrate_clksrc,
+        },
+        .shift          = S3C6400_CLKSRC_SPI1_SHIFT,
+        .mask           = S3C6400_CLKSRC_SPI1_MASK,
+        .sources        = &clkset_spi_mmc,
+        .divider_shift  = S3C6400_CLKDIV2_SPI1_SHIFT,
+        .reg_divider    = S3C_CLK_DIV2,
+};
+
+static struct clk clk_iis_cd0 = {
+        .name           = "iis_cdclk0",
+        .id             = -1,
+};
+
+static struct clk clk_iis_cd1 = {
+        .name           = "iis_cdclk1",
+        .id             = -1,
+};
+
+static struct clk clk_pcm_cd = {
+        .name           = "pcm_cdclk",
+        .id             = -1,
+};
+
+static struct clk *clkset_audio0_list[] = {
+        [0] = &clk_mout_epll.clk,
+        [1] = &clk_dout_mpll,
+        [2] = &clk_fin_epll,
+        [3] = &clk_iis_cd0,
+        [4] = &clk_pcm_cd,
+};
+
+static struct clk_sources clkset_audio0 = {
+        .sources        = clkset_audio0_list,
+        .nr_sources     = ARRAY_SIZE(clkset_audio0_list),
+};
+
+static struct clksrc_clk clk_audio0 = {
+        .clk    = {
+                .name           = "audio-bus",
+                .id             = 0,
+                .ctrlbit        = S3C_CLKCON_SCLK_AUDIO0,
+                .enable         = s3c64xx_sclk_ctrl,
+                .set_parent     = s3c64xx_setparent_clksrc,
+                .get_rate       = s3c64xx_getrate_clksrc,
+                .set_rate       = s3c64xx_setrate_clksrc,
+                .round_rate     = s3c64xx_roundrate_clksrc,
+        },
+        .shift          = S3C6400_CLKSRC_AUDIO0_SHIFT,
+        .mask           = S3C6400_CLKSRC_AUDIO0_MASK,
+        .sources        = &clkset_audio0,
+        .divider_shift  = S3C6400_CLKDIV2_AUDIO0_SHIFT,
+        .reg_divider    = S3C_CLK_DIV2,
+};
+
+static struct clk *clkset_audio1_list[] = {
+        [0] = &clk_mout_epll.clk,
+        [1] = &clk_dout_mpll,
+        [2] = &clk_fin_epll,
+        [3] = &clk_iis_cd1,
+        [4] = &clk_pcm_cd,
+};
+
+static struct clk_sources clkset_audio1 = {
+        .sources        = clkset_audio1_list,
+        .nr_sources     = ARRAY_SIZE(clkset_audio1_list),
+};
+
+static struct clksrc_clk clk_audio1 = {
+        .clk    = {
+                .name           = "audio-bus",
+                .id             = 1,
+                .ctrlbit        = S3C_CLKCON_SCLK_AUDIO1,
+                .enable         = s3c64xx_sclk_ctrl,
+                .set_parent     = s3c64xx_setparent_clksrc,
+                .get_rate       = s3c64xx_getrate_clksrc,
+                .set_rate       = s3c64xx_setrate_clksrc,
+                .round_rate     = s3c64xx_roundrate_clksrc,
+        },
+        .shift          = S3C6400_CLKSRC_AUDIO1_SHIFT,
+        .mask           = S3C6400_CLKSRC_AUDIO1_MASK,
+        .sources        = &clkset_audio1,
+        .divider_shift  = S3C6400_CLKDIV2_AUDIO1_SHIFT,
+        .reg_divider    = S3C_CLK_DIV2,
+};
+
+static struct clksrc_clk clk_irda = {
+        .clk    = {
+                .name           = "irda-bus",
+                .id             = 0,
+                .ctrlbit        = S3C_CLKCON_SCLK_IRDA,
+                .enable         = s3c64xx_sclk_ctrl,
+                .set_parent     = s3c64xx_setparent_clksrc,
+                .get_rate       = s3c64xx_getrate_clksrc,
+                .set_rate       = s3c64xx_setrate_clksrc,
+                .round_rate     = s3c64xx_roundrate_clksrc,
+        },
+        .shift          = S3C6400_CLKSRC_IRDA_SHIFT,
+        .mask           = S3C6400_CLKSRC_IRDA_MASK,
+        .sources        = &clkset_irda,
+        .divider_shift  = S3C6400_CLKDIV2_IRDA_SHIFT,
+        .reg_divider    = S3C_CLK_DIV2,
+};
+
+/* Clock initialisation code */
+
+static struct clksrc_clk *init_parents[] = {
+        &clk_mout_apll,
+        &clk_mout_epll,
+        &clk_mout_mpll,
+        &clk_mmc0,
+        &clk_mmc1,
+        &clk_mmc2,
+        &clk_usbhost,
+        &clk_uart_uclk1,
+        &clk_spi0,
+        &clk_spi1,
+        &clk_audio0,
+        &clk_audio1,
+        &clk_irda,
+};
+
+static void __init_or_cpufreq s3c6400_set_clksrc(struct clksrc_clk *clk)
+{
+        struct clk_sources *srcs = clk->sources;
+        u32 clksrc = __raw_readl(S3C_CLK_SRC);
+
+        clksrc &= clk->mask;
+        clksrc >>= clk->shift;
+
+        if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) {
+                printk(KERN_ERR "%s: bad source %d\n",
+                       clk->clk.name, clksrc);
+                return;
+        }
+
+        clk->clk.parent = srcs->sources[clksrc];
+
+        printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
+               clk->clk.name, clk->clk.parent->name, clksrc,
+               clk_get_rate(&clk->clk));
+}
+
+#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
+
+void __init_or_cpufreq s3c6400_setup_clocks(void)
+{
+        struct clk *xtal_clk;
+        unsigned long xtal;
+        unsigned long fclk;
+        unsigned long hclk;
+        unsigned long hclk2;
+        unsigned long pclk;
+        unsigned long epll;
+        unsigned long apll;
+        unsigned long mpll;
+        unsigned int ptr;
+        u32 clkdiv0;
+
+        printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+        clkdiv0 = __raw_readl(S3C_CLK_DIV0);
+        printk(KERN_DEBUG "%s: clkdiv0 = %08x\n", __func__, clkdiv0);
+
+        xtal_clk = clk_get(NULL, "xtal");
+        BUG_ON(IS_ERR(xtal_clk));
+
+        xtal = clk_get_rate(xtal_clk);
+        clk_put(xtal_clk);
+
+        printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+        epll = s3c6400_get_epll(xtal);
+        mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON));
+        apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON));
+
+        fclk = mpll;
+
+        printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n",
+               apll, mpll, epll);
+
+        hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
+        hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK);
+        pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK);
+
+        printk(KERN_INFO "S3C64XX: HCLK2=%ld, HCLK=%ld, PCLK=%ld\n",
+               hclk2, hclk, pclk);
+
+        clk_fout_mpll.rate = mpll;
+        clk_fout_epll.rate = epll;
+        clk_fout_apll.rate = apll;
+
+        clk_h.rate = hclk;
+        clk_p.rate = pclk;
+        clk_f.rate = fclk;
+
+        for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
+                s3c6400_set_clksrc(init_parents[ptr]);
+}
+
+static struct clk *clks[] __initdata = {
+        &clk_ext_xtal_mux,
+        &clk_iis_cd0,
+        &clk_iis_cd1,
+        &clk_pcm_cd,
+        &clk_mout_epll.clk,
+        &clk_fout_epll,
+        &clk_mout_mpll.clk,
+        &clk_dout_mpll,
+        &clk_mmc0.clk,
+        &clk_mmc1.clk,
+        &clk_mmc2.clk,
+        &clk_usbhost.clk,
+        &clk_uart_uclk1.clk,
+        &clk_spi0.clk,
+        &clk_spi1.clk,
+        &clk_audio0.clk,
+        &clk_audio1.clk,
+        &clk_irda.clk,
+};
+
+void __init s3c6400_register_clocks(void)
+{
+        struct clk *clkp;
+        int ret;
+        int ptr;
+
+        for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
+                clkp = clks[ptr];
+                ret = s3c24xx_register_clock(clkp);
+                if (ret < 0) {
+                        printk(KERN_ERR "Failed to register clock %s (%d)\n",
+                               clkp->name, ret);
+                }
+        }
+
+        clk_mpll.parent = &clk_mout_mpll.clk;
+        clk_epll.parent = &clk_mout_epll.clk;
+}
diff --git a/arch/arm/plat-s3c64xx/s3c6400-init.c b/arch/arm/plat-s3c64xx/s3c6400-init.c
new file mode 100644
index 000000000000..6c28f39df097
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/s3c6400-init.c
@@ -0,0 +1,29 @@
+/* linux/arch/arm/plat-s3c64xx/s3c6400-init.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - CPU initialisation (common with other S3C64XX chips)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s3c6400.h>
+#include <plat/s3c6410.h>
+
+/* uart registration process */
+
+void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+        s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
+}
diff --git a/arch/arm/plat-s3c64xx/setup-fb-24bpp.c b/arch/arm/plat-s3c64xx/setup-fb-24bpp.c
new file mode 100644
index 000000000000..8e28e448dd20
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/setup-fb-24bpp.c
@@ -0,0 +1,37 @@
+/* linux/arch/arm/plat-s3c64xx/setup-fb-24bpp.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * Base S3C64XX setup information for 24bpp LCD framebuffer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fb.h>
+
+#include <mach/regs-fb.h>
+#include <mach/gpio.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+
+extern void s3c64xx_fb_gpio_setup_24bpp(void)
+{
+        unsigned int gpio;
+
+        for (gpio = S3C64XX_GPI(0); gpio <= S3C64XX_GPI(15); gpio++) {
+                s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+                s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+        }
+
+        for (gpio = S3C64XX_GPJ(0); gpio <= S3C64XX_GPJ(11); gpio++) {
+                s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+                s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+        }
+}
diff --git a/arch/arm/plat-s3c64xx/setup-i2c0.c b/arch/arm/plat-s3c64xx/setup-i2c0.c
new file mode 100644
index 000000000000..364480763728
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/setup-i2c0.c
@@ -0,0 +1,31 @@
+/* linux/arch/arm/plat-s3c64xx/setup-i2c0.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * Base S3C64XX I2C bus 0 gpio configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <mach/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-bank-b.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+        s3c_gpio_cfgpin(S3C64XX_GPB(5), S3C64XX_GPB5_I2C_SCL0);
+        s3c_gpio_cfgpin(S3C64XX_GPB(6), S3C64XX_GPB6_I2C_SDA0);
+        s3c_gpio_setpull(S3C64XX_GPB(5), S3C_GPIO_PULL_UP);
+        s3c_gpio_setpull(S3C64XX_GPB(6), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/plat-s3c64xx/setup-i2c1.c b/arch/arm/plat-s3c64xx/setup-i2c1.c
new file mode 100644
index 000000000000..bbe229bd90ca
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/setup-i2c1.c
@@ -0,0 +1,31 @@
+/* linux/arch/arm/plat-s3c64xx/setup-i2c1.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * Base S3C64XX I2C bus 1 gpio configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <mach/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-bank-b.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+{
+        s3c_gpio_cfgpin(S3C64XX_GPB(2), S3C64XX_GPB2_I2C_SCL1);
+        s3c_gpio_cfgpin(S3C64XX_GPB(3), S3C64XX_GPB3_I2C_SDA1);
+        s3c_gpio_setpull(S3C64XX_GPB(2), S3C_GPIO_PULL_UP);
+        s3c_gpio_setpull(S3C64XX_GPB(3), S3C_GPIO_PULL_UP);
+}