44 files changed, 341 insertions, 222 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 233a222752c0..4f8760d7b7a7 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -688,6 +688,7 @@ config ARCH_DAVINCI
         select HAVE_IDE
         select COMMON_CLKDEV
         select GENERIC_ALLOCATOR
+        select ARCH_HAS_HOLES_MEMORYMODEL
         help
           Support for TI's DaVinci platform.
 
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index a9b650dcc172..077ecf4fecda 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -236,6 +236,7 @@ static struct vpfe_subdev_info vpfe_sub_devs[] = {
 
 static struct vpfe_config vpfe_cfg = {
         .num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+        .i2c_adapter_id = 1,
         .sub_devs = vpfe_sub_devs,
         .card_name = "DM355 EVM",
         .ccdc = "DM355 CCDC",
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 289fe1b7d25a..b476395d2cd4 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -192,7 +192,11 @@ static struct davinci_i2c_platform_data i2c_pdata = {
         .bus_delay      = 0     /* usec */,
 };
 
-#ifdef CONFIG_KEYBOARD_DAVINCI
+static int dm365evm_keyscan_enable(struct device *dev)
+{
+        return davinci_cfg_reg(DM365_KEYSCAN);
+}
+
 static unsigned short dm365evm_keymap[] = {
         KEY_KP2,
         KEY_LEFT,
@@ -214,6 +218,7 @@ static unsigned short dm365evm_keymap[] = {
 };
 
 static struct davinci_ks_platform_data dm365evm_ks_data = {
+        .device_enable  = dm365evm_keyscan_enable,
         .keymap         = dm365evm_keymap,
         .keymapsize     = ARRAY_SIZE(dm365evm_keymap),
         .rep            = 1,
@@ -222,7 +227,6 @@ static struct davinci_ks_platform_data dm365evm_ks_data = {
         .interval       = 0x2,
         .matrix_type    = DAVINCI_KEYSCAN_MATRIX_4X4,
 };
-#endif
 
 static int cpld_mmc_get_cd(int module)
 {
@@ -511,10 +515,7 @@ static __init void dm365_evm_init(void)
 
         dm365_init_asp(&dm365_evm_snd_data);
         dm365_init_rtc();
-
-#ifdef CONFIG_KEYBOARD_DAVINCI
         dm365_init_ks(&dm365evm_ks_data);
-#endif
 }
 
 static __init void dm365_evm_irq_init(void)
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index fd0398bc6db3..e9612cf727b7 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -247,6 +247,7 @@ static struct vpfe_subdev_info vpfe_sub_devs[] = {
 
 static struct vpfe_config vpfe_cfg = {
         .num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+        .i2c_adapter_id = 1,
         .sub_devs = vpfe_sub_devs,
         .card_name = "DM6446 EVM",
         .ccdc = "DM6446 CCDC",
diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c
index 52b287cf3a42..37311d1830eb 100644
--- a/arch/arm/mach-davinci/cp_intc.c
+++ b/arch/arm/mach-davinci/cp_intc.c
@@ -81,12 +81,23 @@ static int cp_intc_set_irq_type(unsigned int irq, unsigned int flow_type)
         return 0;
 }
 
+/*
+ * Faking this allows us to to work with suspend functions of
+ * generic drivers which call {enable|disable}_irq_wake for
+ * wake up interrupt sources (eg RTC on DA850).
+ */
+static int cp_intc_set_wake(unsigned int irq, unsigned int on)
+{
+        return 0;
+}
+
 static struct irq_chip cp_intc_irq_chip = {
         .name           = "cp_intc",
         .ack            = cp_intc_ack_irq,
         .mask           = cp_intc_mask_irq,
         .unmask         = cp_intc_unmask_irq,
         .set_type       = cp_intc_set_irq_type,
+        .set_wake       = cp_intc_set_wake,
 };
 
 void __init cp_intc_init(void __iomem *base, unsigned short num_irq,
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index dd2d32c4ce86..a5105f03fd86 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -481,11 +481,18 @@ static struct platform_device da8xx_rtc_device = {
 
 int da8xx_register_rtc(void)
 {
+        int ret;
+
         /* Unlock the rtc's registers */
         __raw_writel(0x83e70b13, IO_ADDRESS(DA8XX_RTC_BASE + 0x6c));
         __raw_writel(0x95a4f1e0, IO_ADDRESS(DA8XX_RTC_BASE + 0x70));
 
-        return platform_device_register(&da8xx_rtc_device);
+        ret = platform_device_register(&da8xx_rtc_device);
+        if (!ret)
+                /* Atleast on DA850, RTC is a wakeup source */
+                device_init_wakeup(&da8xx_rtc_device.dev, true);
+
+        return ret;
 }
 
 static struct resource da8xx_cpuidle_resources[] = {
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 2ec619ec1657..f53735cb922e 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -993,7 +993,6 @@ void __init dm365_init_asp(struct snd_platform_data *pdata)
 
 void __init dm365_init_ks(struct davinci_ks_platform_data *pdata)
 {
-        davinci_cfg_reg(DM365_KEYSCAN);
         dm365_ks_device.dev.platform_data = pdata;
         platform_device_register(&dm365_ks_device);
 }
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index 8f49b2b12608..b22dec4abf78 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -24,8 +24,6 @@
 
 #include "common.h"
 
-#define ARRAY_AND_SIZE(x)       (x), ARRAY_SIZE(x)
-
 static unsigned long ttc_dkb_pin_config[] __initdata = {
         /* UART2 */
         GPIO47_UART2_RXD,
diff --git a/arch/arm/mach-mx2/mxt_td60.c b/arch/arm/mach-mx2/mxt_td60.c
index 03dbbdc98955..8bcc1a5b8829 100644
--- a/arch/arm/mach-mx2/mxt_td60.c
+++ b/arch/arm/mach-mx2/mxt_td60.c
@@ -58,21 +58,6 @@ static unsigned int mxt_td60_pins[] __initdata = {
         PE9_PF_UART3_RXD,
         PE10_PF_UART3_CTS,
         PE11_PF_UART3_RTS,
-        /* UART3 */
-        PB26_AF_UART4_RTS,
-        PB28_AF_UART4_TXD,
-        PB29_AF_UART4_CTS,
-        PB31_AF_UART4_RXD,
-        /* UART4 */
-        PB18_AF_UART5_TXD,
-        PB19_AF_UART5_RXD,
-        PB20_AF_UART5_CTS,
-        PB21_AF_UART5_RTS,
-        /* UART5 */
-        PB10_AF_UART6_TXD,
-        PB12_AF_UART6_CTS,
-        PB11_AF_UART6_RXD,
-        PB13_AF_UART6_RTS,
         /* FEC */
         PD0_AIN_FEC_TXD0,
         PD1_AIN_FEC_TXD1,
@@ -261,12 +246,6 @@ static struct imxuart_platform_data uart_pdata[] = {
                 .flags = IMXUART_HAVE_RTSCTS,
         }, {
                 .flags = IMXUART_HAVE_RTSCTS,
-        }, {
-                .flags = IMXUART_HAVE_RTSCTS,
-        }, {
-                .flags = IMXUART_HAVE_RTSCTS,
-        }, {
-                .flags = IMXUART_HAVE_RTSCTS,
         },
 };
 
@@ -278,9 +257,6 @@ static void __init mxt_td60_board_init(void)
         mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
         mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
         mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
-        mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
-        mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
-        mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
         mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info);
 
         i2c_register_board_info(0, mxt_td60_i2c_devices,
diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c
index ef26951a5275..6e838b857712 100644
--- a/arch/arm/mach-mx25/clock.c
+++ b/arch/arm/mach-mx25/clock.c
@@ -173,6 +173,7 @@ DEFINE_CLOCK(pwm4_clk,	 0, CCM_CGCR2,  2, get_rate_ipg, NULL);
 DEFINE_CLOCK(kpp_clk,    0, CCM_CGCR1, 28, get_rate_ipg, NULL);
 DEFINE_CLOCK(tsc_clk,    0, CCM_CGCR2, 13, get_rate_ipg, NULL);
 DEFINE_CLOCK(i2c_clk,    0, CCM_CGCR0,  6, get_rate_i2c, NULL);
+DEFINE_CLOCK(fec_clk,    0, CCM_CGCR0, 23, get_rate_ipg, NULL);
 
 #define _REGISTER_CLOCK(d, n, c)        \
         {                               \
@@ -204,6 +205,7 @@ static struct clk_lookup lookups[] = {
         _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
         _REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
         _REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
+        _REGISTER_CLOCK("fec.0", NULL, fec_clk)
 };
 
 int __init mx25_clocks_init(unsigned long fref)
diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
index 63511de3a559..9fdeea1c083b 100644
--- a/arch/arm/mach-mx25/devices.c
+++ b/arch/arm/mach-mx25/devices.c
@@ -419,3 +419,22 @@ int __init mxc_register_gpios(void)
         return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
 }
 
+static struct resource mx25_fec_resources[] = {
+        {
+                .start  = MX25_FEC_BASE_ADDR,
+                .end    = MX25_FEC_BASE_ADDR + 0xfff,
+                .flags  = IORESOURCE_MEM,
+        },
+        {
+                .start  = MX25_INT_FEC,
+                .end    = MX25_INT_FEC,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device mx25_fec_device = {
+        .name   = "fec",
+        .id     = 0,
+        .num_resources  = ARRAY_SIZE(mx25_fec_resources),
+        .resource       = mx25_fec_resources,
+};
diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h
index fe6bf88ad1dd..fe5420fcd11f 100644
--- a/arch/arm/mach-mx25/devices.h
+++ b/arch/arm/mach-mx25/devices.h
@@ -17,3 +17,4 @@ extern struct platform_device mxc_keypad_device;
 extern struct platform_device mxc_i2c_device0;
 extern struct platform_device mxc_i2c_device1;
 extern struct platform_device mxc_i2c_device2;
+extern struct platform_device mx25_fec_device;
diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c
index d23ae571c03f..921bc99ea231 100644
--- a/arch/arm/mach-mx25/mx25pdk.c
+++ b/arch/arm/mach-mx25/mx25pdk.c
@@ -18,10 +18,11 @@
 
 #include <linux/types.h>
 #include <linux/init.h>
+#include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
-#include <linux/smsc911x.h>
+#include <linux/fec.h>
 #include <linux/platform_device.h>
 
 #include <mach/hardware.h>
@@ -35,16 +36,57 @@
 #include <mach/mx25.h>
 #include <mach/mxc_nand.h>
 #include "devices.h"
-#include <mach/iomux-v3.h>
+#include <mach/iomux.h>
 
 static struct imxuart_platform_data uart_pdata = {
         .flags = IMXUART_HAVE_RTSCTS,
 };
 
+static struct pad_desc mx25pdk_pads[] = {
+        MX25_PAD_FEC_MDC__FEC_MDC,
+        MX25_PAD_FEC_MDIO__FEC_MDIO,
+        MX25_PAD_FEC_TDATA0__FEC_TDATA0,
+        MX25_PAD_FEC_TDATA1__FEC_TDATA1,
+        MX25_PAD_FEC_TX_EN__FEC_TX_EN,
+        MX25_PAD_FEC_RDATA0__FEC_RDATA0,
+        MX25_PAD_FEC_RDATA1__FEC_RDATA1,
+        MX25_PAD_FEC_RX_DV__FEC_RX_DV,
+        MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
+        MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
+        MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
+};
+
+static struct fec_platform_data mx25_fec_pdata = {
+        .phy    = PHY_INTERFACE_MODE_RMII,
+};
+
+#define FEC_ENABLE_GPIO         35
+#define FEC_RESET_B_GPIO        104
+
+static void __init mx25pdk_fec_reset(void)
+{
+        gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable");
+        gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset");
+
+        gpio_direction_output(FEC_ENABLE_GPIO, 0);  /* drop PHY power */
+        gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */
+        udelay(2);
+
+        /* turn on PHY power and lift reset */
+        gpio_set_value(FEC_ENABLE_GPIO, 1);
+        gpio_set_value(FEC_RESET_B_GPIO, 1);
+}
+
 static void __init mx25pdk_init(void)
 {
+        mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
+                        ARRAY_SIZE(mx25pdk_pads));
+
         mxc_register_device(&mxc_uart_device0, &uart_pdata);
         mxc_register_device(&mxc_usbh2, NULL);
+
+        mx25pdk_fec_reset();
+        mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
 }
 
 static void __init mx25pdk_timer_init(void)
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index ea8ed109a7c2..28294416b0af 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -49,6 +49,7 @@ config MACH_PCM037_EET
 config MACH_MX31LITE
         bool "Support MX31 LITEKIT (LogicPD)"
         select ARCH_MX31
+        select MXC_ULPI if USB_ULPI
         help
           Include support for MX31 LITEKIT platform. This includes specific
           configurations for the board and its peripherals.
@@ -63,7 +64,7 @@ config MACH_MX31_3DS
 config MACH_MX31MOBOARD
         bool "Support mx31moboard platforms (EPFL Mobots group)"
         select ARCH_MX31
-        select MXC_ULPI
+        select MXC_ULPI if USB_ULPI
         help
           Include support for mx31moboard platform. This includes specific
           configurations for the board and its peripherals.
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index bedf5b8d976a..6858a4f9806c 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -65,6 +65,11 @@ static struct map_desc mxc_io_desc[] __initdata = {
                 .pfn            = __phys_to_pfn(AIPS2_BASE_ADDR),
                 .length         = AIPS2_SIZE,
                 .type           = MT_DEVICE_NONSHARED
+        }, {
+                .virtual = SPBA0_BASE_ADDR_VIRT,
+                .pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
+                .length = SPBA0_SIZE,
+                .type = MT_DEVICE_NONSHARED
         },
 };
 
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 0497c152be18..3e7bafa2ddbb 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -494,11 +494,6 @@ static void mxc_init_i2c(void)
  */
 static struct map_desc mx31ads_io_desc[] __initdata = {
         {
-                .virtual        = SPBA0_BASE_ADDR_VIRT,
-                .pfn            = __phys_to_pfn(SPBA0_BASE_ADDR),
-                .length         = SPBA0_SIZE,
-                .type           = MT_DEVICE_NONSHARED
-        }, {
                 .virtual        = CS4_BASE_ADDR_VIRT,
                 .pfn            = __phys_to_pfn(CS4_BASE_ADDR),
                 .length         = CS4_SIZE / 2,
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index def6b6736594..789b20d1730f 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -135,6 +135,7 @@ static struct spi_board_info mc13783_spi_dev __initdata = {
  * USB
  */
 
+#if defined(CONFIG_USB_ULPI)
 #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
                         PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
 
@@ -180,6 +181,7 @@ static struct mxc_usbh_platform_data usbh2_pdata = {
         .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
         .flags  = MXC_EHCI_POWER_PINS_ENABLED,
 };
+#endif
 
 /*
  * NOR flash
@@ -212,11 +214,6 @@ static struct platform_device physmap_flash_device = {
  */
 static struct map_desc mx31lite_io_desc[] __initdata = {
         {
-                .virtual = SPBA0_BASE_ADDR_VIRT,
-                .pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
-                .length = SPBA0_SIZE,
-                .type = MT_DEVICE_NONSHARED
-        }, {
                 .virtual = CS4_BASE_ADDR_VIRT,
                 .pfn = __phys_to_pfn(CS4_BASE_ADDR),
                 .length = CS4_SIZE,
@@ -261,11 +258,13 @@ static void __init mxc_board_init(void)
         mxc_register_device(&mxc_spi_device1, &spi1_pdata);
         spi_register_board_info(&mc13783_spi_dev, 1);
 
+#if defined(CONFIG_USB_ULPI)
         /* USB */
         usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
                                 USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
 
         mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
 
         /* SMSC9117 IRQ pin */
         ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 8fc624f141cb..438428eaf769 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -179,7 +179,7 @@ static int __init devboard_usbh1_init(void)
 
         usbh1_pdata.otg = otg;
 
-        return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
+        return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
 }
 
 /*
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 85184a35e674..1f44b9ccbb0f 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -294,7 +294,7 @@ static int __init marxbot_usbh1_init(void)
 
         usbh1_pdata.otg = otg;
 
-        return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
+        return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
 }
 
 /*
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index b70529145936..cfd605d078ec 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -346,6 +346,8 @@ static struct fsl_usb2_platform_data usb_pdata = {
         .phy_mode       = FSL_USB2_PHY_ULPI,
 };
 
+#if defined(CONFIG_USB_ULPI)
+
 #define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
 
 static int moboard_usbh2_hw_init(struct platform_device *pdev)
@@ -392,8 +394,11 @@ static int __init moboard_usbh2_init(void)
         usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
                         USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
 
-        return mxc_register_device(&mx31_usbh2, &usbh2_pdata);
+        return mxc_register_device(&mxc_usbh2, &usbh2_pdata);
 }
+#else
+static inline int moboard_usbh2_init(void) { return 0; }
+#endif
 
 
 static struct gpio_led mx31moboard_leds[] = {
diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c
index 0f7a2f06bc2d..18715f1aa7eb 100644
--- a/arch/arm/mach-mx3/mx31pdk.c
+++ b/arch/arm/mach-mx3/mx31pdk.c
@@ -211,11 +211,6 @@ static int __init mx31pdk_init_expio(void)
  */
 static struct map_desc mx31pdk_io_desc[] __initdata = {
         {
-                .virtual = SPBA0_BASE_ADDR_VIRT,
-                .pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
-                .length = SPBA0_SIZE,
-                .type = MT_DEVICE_NONSHARED,
-        }, {
                 .virtual = CS5_BASE_ADDR_VIRT,
                 .pfn = __phys_to_pfn(CS5_BASE_ADDR),
                 .length = CS5_SIZE,
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index 6cbaabedf386..5be396917c99 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -322,16 +322,25 @@ static int pcm037_camera_power(struct device *dev, int on)
         return 0;
 }
 
-static struct i2c_board_info pcm037_i2c_2_devices[] = {
+static struct i2c_board_info pcm037_i2c_camera[] = {
         {
                 I2C_BOARD_INFO("mt9t031", 0x5d),
+        }, {
+                I2C_BOARD_INFO("mt9v022", 0x48),
         },
 };
 
-static struct soc_camera_link iclink = {
+static struct soc_camera_link iclink_mt9v022 = {
+        .bus_id         = 0,            /* Must match with the camera ID */
+        .board_info     = &pcm037_i2c_camera[1],
+        .i2c_adapter_id = 2,
+        .module_name    = "mt9v022",
+};
+
+static struct soc_camera_link iclink_mt9t031 = {
         .bus_id         = 0,            /* Must match with the camera ID */
         .power          = pcm037_camera_power,
-        .board_info     = &pcm037_i2c_2_devices[0],
+        .board_info     = &pcm037_i2c_camera[0],
         .i2c_adapter_id = 2,
         .module_name    = "mt9t031",
 };
@@ -345,11 +354,19 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
         }
 };
 
-static struct platform_device pcm037_camera = {
+static struct platform_device pcm037_mt9t031 = {
         .name   = "soc-camera-pdrv",
         .id     = 0,
         .dev    = {
-                .platform_data = &iclink,
+                .platform_data = &iclink_mt9t031,
+        },
+};
+
+static struct platform_device pcm037_mt9v022 = {
+        .name   = "soc-camera-pdrv",
+        .id     = 1,
+        .dev    = {
+                .platform_data = &iclink_mt9v022,
         },
 };
 
@@ -449,7 +466,8 @@ static int __init pcm037_camera_alloc_dma(const size_t buf_size)
 static struct platform_device *devices[] __initdata = {
         &pcm037_flash,
         &pcm037_sram_device,
-        &pcm037_camera,
+        &pcm037_mt9t031,
+        &pcm037_mt9v022,
 };
 
 static struct ipu_platform_data mx3_ipu_data = {
@@ -599,7 +617,7 @@ static void __init mxc_board_init(void)
         if (!ret)
                 gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
         else
-                iclink.power = NULL;
+                iclink_mt9t031.power = NULL;
 
         if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
                 mxc_register_device(&mx3_camera, &camera_pdata);
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 8a0837ea0294..dee92182749b 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -37,6 +37,8 @@ config MACH_ZYLONITE320
 config MACH_LITTLETON
         bool "PXA3xx Form Factor Platform (aka Littleton)"
         select PXA3xx
+        select CPU_PXA300
+        select CPU_PXA310
         select PXA_SSP
 
 config MACH_TAVOREVB
diff --git a/arch/arm/mach-pxa/include/mach/zylonite.h b/arch/arm/mach-pxa/include/mach/zylonite.h
index bf6785adccf4..9edf645368d6 100644
--- a/arch/arm/mach-pxa/include/mach/zylonite.h
+++ b/arch/arm/mach-pxa/include/mach/zylonite.h
@@ -8,13 +8,6 @@
 /* the following variables are processor specific and initialized
  * by the corresponding zylonite_pxa3xx_init()
  */
-struct platform_mmc_slot {
-        int gpio_cd;
-        int gpio_wp;
-};
-
-extern struct platform_mmc_slot zylonite_mmc_slot[];
-
 extern int gpio_eth_irq;
 extern int gpio_debug_led1;
 extern int gpio_debug_led2;
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index f28c1715b910..fa527b258d61 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -110,6 +110,12 @@ static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
         GPIO7_MMC1_CLK,
         GPIO8_MMC1_CMD,
         GPIO15_GPIO, /* card detect */
+
+        /* UART3 */
+        GPIO107_UART3_CTS,
+        GPIO108_UART3_RTS,
+        GPIO109_UART3_TXD,
+        GPIO110_UART3_RXD,
 };
 
 static struct resource smc91x_resources[] = {
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index e5eeb3a62d01..c2b938a4d5c9 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -293,7 +293,7 @@ static struct pxamci_platform_data poodle_mci_platform_data = {
         .init                   = poodle_mci_init,
         .setpower               = poodle_mci_setpower,
         .exit                   = poodle_mci_exit,
-        .gpio_card_detect       = POODLE_IRQ_GPIO_nSD_DETECT,
+        .gpio_card_detect       = POODLE_GPIO_nSD_DETECT,
         .gpio_card_ro           = POODLE_GPIO_nSD_WP,
         .gpio_power             = -1,
 };
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 5b986a8bd9e6..75f2a37f945d 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -25,6 +25,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
+#include <linux/apm-emulation.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -626,8 +627,27 @@ static void zeus_power_off(void)
         pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP);
 }
 
-int zeus_get_pcb_info(struct i2c_client *client, unsigned gpio,
-                      unsigned ngpio, void *context)
+#ifdef CONFIG_APM_EMULATION
+static void zeus_get_power_status(struct apm_power_info *info)
+{
+        /* Power supply is always present */
+        info->ac_line_status    = APM_AC_ONLINE;
+        info->battery_status    = APM_BATTERY_STATUS_NOT_PRESENT;
+        info->battery_flag      = APM_BATTERY_FLAG_NOT_PRESENT;
+}
+
+static inline void zeus_setup_apm(void)
+{
+        apm_get_power_status = zeus_get_power_status;
+}
+#else
+static inline void zeus_setup_apm(void)
+{
+}
+#endif
+
+static int zeus_get_pcb_info(struct i2c_client *client, unsigned gpio,
+                             unsigned ngpio, void *context)
 {
         int i;
         u8 pcb_info = 0;
@@ -726,9 +746,18 @@ static mfp_cfg_t zeus_pin_config[] __initdata = {
         GPIO99_GPIO,            /* CF RDY */
 };
 
+/*
+ * DM9k MSCx settings:  SRAM, 16 bits
+ *                      17 cycles delay first access
+ *                       5 cycles delay next access
+ *                      13 cycles recovery time
+ *                      faster device
+ */
+#define DM9K_MSC_VALUE          0xe4c9
+
 static void __init zeus_init(void)
 {
-        u16 dm9000_msc = 0xe279;
+        u16 dm9000_msc = DM9K_MSC_VALUE;
 
         system_rev = __raw_readw(ZEUS_CPLD_VERSION);
         pr_info("Zeus CPLD V%dI%d\n", (system_rev & 0xf0) >> 4, (system_rev & 0x0f));
@@ -738,6 +767,7 @@ static void __init zeus_init(void)
         MSC1 = (MSC1 & 0xffff0000) | dm9000_msc;
 
         pm_power_off = zeus_power_off;
+        zeus_setup_apm();
 
         pxa2xx_mfp_config(ARRAY_AND_SIZE(zeus_pin_config));
 
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index b66e9e2d06e7..2b4043c04d0c 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -36,9 +36,6 @@
 #include "devices.h"
 #include "generic.h"
 
-#define MAX_SLOTS       3
-struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS];
-
 int gpio_eth_irq;
 int gpio_debug_led1;
 int gpio_debug_led2;
@@ -220,84 +217,28 @@ static inline void zylonite_init_lcd(void) {}
 #endif
 
 #if defined(CONFIG_MMC)
-static int zylonite_mci_ro(struct device *dev)
-{
-        struct platform_device *pdev = to_platform_device(dev);
-
-        return gpio_get_value(zylonite_mmc_slot[pdev->id].gpio_wp);
-}
-
-static int zylonite_mci_init(struct device *dev,
-                             irq_handler_t zylonite_detect_int,
-                             void *data)
-{
-        struct platform_device *pdev = to_platform_device(dev);
-        int err, cd_irq, gpio_cd, gpio_wp;
-
-        cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd);
-        gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd;
-        gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp;
-
-        /*
-         * setup GPIO for Zylonite MMC controller
-         */
-        err = gpio_request(gpio_cd, "mmc card detect");
-        if (err)
-                goto err_request_cd;
-        gpio_direction_input(gpio_cd);
-
-        err = gpio_request(gpio_wp, "mmc write protect");
-        if (err)
-                goto err_request_wp;
-        gpio_direction_input(gpio_wp);
-
-        err = request_irq(cd_irq, zylonite_detect_int,
-                          IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-                          "MMC card detect", data);
-        if (err) {
-                printk(KERN_ERR "%s: MMC/SD/SDIO: "
-                                "can't request card detect IRQ\n", __func__);
-                goto err_request_irq;
-        }
-
-        return 0;
-
-err_request_irq:
-        gpio_free(gpio_wp);
-err_request_wp:
-        gpio_free(gpio_cd);
-err_request_cd:
-        return err;
-}
-
-static void zylonite_mci_exit(struct device *dev, void *data)
-{
-        struct platform_device *pdev = to_platform_device(dev);
-        int cd_irq, gpio_cd, gpio_wp;
-
-        cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd);
-        gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd;
-        gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp;
-
-        free_irq(cd_irq, data);
-        gpio_free(gpio_cd);
-        gpio_free(gpio_wp);
-}
-
 static struct pxamci_platform_data zylonite_mci_platform_data = {
         .detect_delay   = 20,
         .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
-        .init           = zylonite_mci_init,
-        .exit           = zylonite_mci_exit,
-        .get_ro         = zylonite_mci_ro,
-        .gpio_card_detect = -1,
-        .gpio_card_ro   = -1,
+        .gpio_card_detect = EXT_GPIO(0),
+        .gpio_card_ro   = EXT_GPIO(2),
         .gpio_power     = -1,
 };
 
 static struct pxamci_platform_data zylonite_mci2_platform_data = {
         .detect_delay   = 20,
         .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
+        .gpio_card_detect = EXT_GPIO(1),
+        .gpio_card_ro   = EXT_GPIO(3),
+        .gpio_power     = -1,
+};
+
+static struct pxamci_platform_data zylonite_mci3_platform_data = {
+        .detect_delay   = 20,
+        .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
+        .gpio_card_detect = EXT_GPIO(30),
+        .gpio_card_ro   = EXT_GPIO(31),
+        .gpio_power     = -1,
 };
 
 static void __init zylonite_init_mmc(void)
@@ -305,7 +246,7 @@ static void __init zylonite_init_mmc(void)
         pxa_set_mci_info(&zylonite_mci_platform_data);
         pxa3xx_set_mci2_info(&zylonite_mci2_platform_data);
         if (cpu_is_pxa310())
-                pxa3xx_set_mci3_info(&zylonite_mci_platform_data);
+                pxa3xx_set_mci3_info(&zylonite_mci3_platform_data);
 }
 #else
 static inline void zylonite_init_mmc(void) {}
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 84095440a878..3aa73b3e33f2 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -129,8 +129,8 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
         GPIO22_I2C_SDA,
 
         /* GPIO */
-        GPIO18_GPIO,    /* GPIO Expander #0 INT_N */
-        GPIO19_GPIO,    /* GPIO Expander #1 INT_N */
+        GPIO18_GPIO | MFP_PULL_HIGH,    /* GPIO Expander #0 INT_N */
+        GPIO19_GPIO | MFP_PULL_HIGH,    /* GPIO Expander #1 INT_N */
 };
 
 static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
@@ -258,10 +258,6 @@ void __init zylonite_pxa300_init(void)
                 /* detect LCD panel */
                 zylonite_detect_lcd_panel();
 
-                /* MMC card detect & write protect for controller 0 */
-                zylonite_mmc_slot[0].gpio_cd  = EXT_GPIO(0);
-                zylonite_mmc_slot[0].gpio_wp  = EXT_GPIO(2);
-
                 /* WM9713 IRQ */
                 wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO26);
 
@@ -276,10 +272,6 @@ void __init zylonite_pxa300_init(void)
         if (cpu_is_pxa310()) {
                 pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa310_mfp_cfg));
                 gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO102);
-
-                /* MMC card detect & write protect for controller 2 */
-                zylonite_mmc_slot[2].gpio_cd = EXT_GPIO(30);
-                zylonite_mmc_slot[2].gpio_wp = EXT_GPIO(31);
         }
 
         /* GPIOs for Debug LEDs */
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 60d08f23f5e4..9942bac4cf7d 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -209,10 +209,6 @@ void __init zylonite_pxa320_init(void)
                 gpio_debug_led1 = mfp_to_gpio(MFP_PIN_GPIO1_2);
                 gpio_debug_led2 = mfp_to_gpio(MFP_PIN_GPIO4_2);
 
-                /* MMC card detect & write protect for controller 0 */
-                zylonite_mmc_slot[0].gpio_cd  = mfp_to_gpio(MFP_PIN_GPIO1);
-                zylonite_mmc_slot[0].gpio_wp  = mfp_to_gpio(MFP_PIN_GPIO5);
-
                 /* WM9713 IRQ */
                 wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO15);
         }
diff --git a/arch/arm/mach-s3c2410/include/mach/ts.h b/arch/arm/mach-s3c2410/include/mach/ts.h
new file mode 100644
index 000000000000..dc361700d695
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/ts.h
@@ -0,0 +1,21 @@
+/* linux/include/asm/arch-s3c2410/ts.h
+ *
+ * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_TS_H
+#define __ASM_ARM_TS_H
+
+struct s3c2410_ts_mach_info {
+       int             delay;
+       int             presc;
+       int             oversampling_shift;
+};
+
+extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *);
+
+#endif /* __ASM_ARM_TS_H */
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 4c79ac8a6c33..97162fdd0590 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -279,6 +279,7 @@ static struct s3c2410_nand_set __initdata bast_nand_sets[] = {
                 .name           = "SmartMedia",
                 .nr_chips       = 1,
                 .nr_map         = smartmedia_map,
+                .options        = NAND_SCAN_SILENT_NODEV,
                 .nr_partitions  = ARRAY_SIZE(bast_default_nand_part),
                 .partitions     = bast_default_nand_part,
         },
@@ -293,6 +294,7 @@ static struct s3c2410_nand_set __initdata bast_nand_sets[] = {
                 .name           = "chip1",
                 .nr_chips       = 1,
                 .nr_map         = chip1_map,
+                .options        = NAND_SCAN_SILENT_NODEV,
                 .nr_partitions  = ARRAY_SIZE(bast_default_nand_part),
                 .partitions     = bast_default_nand_part,
         },
@@ -300,6 +302,7 @@ static struct s3c2410_nand_set __initdata bast_nand_sets[] = {
                 .name           = "chip2",
                 .nr_chips       = 1,
                 .nr_map         = chip2_map,
+                .options        = NAND_SCAN_SILENT_NODEV,
                 .nr_partitions  = ARRAY_SIZE(bast_default_nand_part),
                 .partitions     = bast_default_nand_part,
         }
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 49053254c98d..1e34abe1a19e 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -46,6 +46,7 @@
 #include <mach/h1940.h>
 #include <mach/h1940-latch.h>
 #include <mach/fb.h>
+#include <mach/ts.h>
 #include <plat/udc.h>
 #include <plat/iic.h>
 
@@ -140,6 +141,11 @@ static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
         .vbus_pin_inverted      = 1,
 };
 
+static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = {
+                .delay = 10000,
+                .presc = 49,
+                .oversampling_shift = 2,
+};
 
 /**
  * Set lcd on or off
@@ -265,6 +271,7 @@ static struct platform_device h1940_lcd_powerdev = {
 };
 
 static struct platform_device *h1940_devices[] __initdata = {
+        &s3c_device_ts,
         &s3c_device_usb,
         &s3c_device_lcd,
         &s3c_device_wdt,
@@ -305,6 +312,7 @@ static void __init h1940_init(void)
 
         s3c24xx_fb_set_platdata(&h1940_fb_info);
         s3c24xx_udc_set_platdata(&h1940_udc_cfg);
+        s3c24xx_ts_set_platdata(&h1940_ts_cfg);
         s3c_i2c0_set_platdata(NULL);
 
         s3c_device_sdi.dev.platform_data = &h1940_mmc_cfg;
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 015dfb2a80da..f35371db33f5 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -208,6 +208,7 @@ static struct s3c2410_nand_set __initdata osiris_nand_sets[] = {
                 .name           = "External",
                 .nr_chips       = 1,
                 .nr_map         = external_map,
+                .options        = NAND_SCAN_SILENT_NODEV,
                 .nr_partitions  = ARRAY_SIZE(osiris_default_nand_part),
                 .partitions     = osiris_default_nand_part,
         },
@@ -222,6 +223,7 @@ static struct s3c2410_nand_set __initdata osiris_nand_sets[] = {
                 .name           = "chip1",
                 .nr_chips       = 1,
                 .nr_map         = chip1_map,
+                .options        = NAND_SCAN_SILENT_NODEV,
                 .nr_partitions  = ARRAY_SIZE(osiris_default_nand_part),
                 .partitions     = osiris_default_nand_part,
         },
diff --git a/arch/arm/mach-w90x900/include/mach/system.h b/arch/arm/mach-w90x900/include/mach/system.h
index 940640066857..ce228bdc66dd 100644
--- a/arch/arm/mach-w90x900/include/mach/system.h
+++ b/arch/arm/mach-w90x900/include/mach/system.h
@@ -15,7 +15,15 @@
  *
  */
 
+#include <linux/io.h>
 #include <asm/proc-fns.h>
+#include <mach/map.h>
+#include <mach/regs-timer.h>
+
+#define WTCR    (TMR_BA + 0x1C)
+#define WTCLK   (1 << 10)
+#define WTE     (1 << 7)
+#define WTRE    (1 << 1)
 
 static void arch_idle(void)
 {
@@ -23,6 +31,11 @@ static void arch_idle(void)
 
 static void arch_reset(char mode, const char *cmd)
 {
-        cpu_reset(0);
+        if (mode == 's') {
+                /* Jump into ROM at address 0 */
+                cpu_reset(0);
+        } else {
+                __raw_writel(WTE | WTRE | WTCLK, WTCR);
+        }
 }
 
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index 4128af870b41..b80f769bc135 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -42,7 +42,10 @@
 #define TICKS_PER_SEC   100
 #define PRESCALE        0x63 /* Divider = prescale + 1 */
 
-unsigned int timer0_load;
+#define TDR_SHIFT       24
+#define TDR_MASK        ((1 << TDR_SHIFT) - 1)
+
+static unsigned int timer0_load;
 
 static void nuc900_clockevent_setmode(enum clock_event_mode mode,
                 struct clock_event_device *clk)
@@ -88,7 +91,7 @@ static int nuc900_clockevent_setnextevent(unsigned long evt,
 static struct clock_event_device nuc900_clockevent_device = {
         .name           = "nuc900-timer0",
         .shift          = 32,
-        .features       = CLOCK_EVT_MODE_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+        .features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
         .set_mode       = nuc900_clockevent_setmode,
         .set_next_event = nuc900_clockevent_setnextevent,
         .rating         = 300,
@@ -112,8 +115,23 @@ static struct irqaction nuc900_timer0_irq = {
         .handler        = nuc900_timer0_interrupt,
 };
 
-static void __init nuc900_clockevents_init(unsigned int rate)
+static void __init nuc900_clockevents_init(void)
 {
+        unsigned int rate;
+        struct clk *clk = clk_get(NULL, "timer0");
+
+        BUG_ON(IS_ERR(clk));
+
+        __raw_writel(0x00, REG_TCSR0);
+
+        clk_enable(clk);
+        rate = clk_get_rate(clk) / (PRESCALE + 1);
+
+        timer0_load = (rate / TICKS_PER_SEC);
+
+        __raw_writel(RESETINT, REG_TISR);
+        setup_irq(IRQ_TIMER0, &nuc900_timer0_irq);
+
         nuc900_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC,
                                         nuc900_clockevent_device.shift);
         nuc900_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff,
@@ -127,26 +145,35 @@ static void __init nuc900_clockevents_init(unsigned int rate)
 
 static cycle_t nuc900_get_cycles(struct clocksource *cs)
 {
-        return ~__raw_readl(REG_TDR1);
+        return (~__raw_readl(REG_TDR1)) & TDR_MASK;
 }
 
 static struct clocksource clocksource_nuc900 = {
         .name   = "nuc900-timer1",
         .rating = 200,
         .read   = nuc900_get_cycles,
-        .mask   = CLOCKSOURCE_MASK(32),
-        .shift  = 20,
+        .mask   = CLOCKSOURCE_MASK(TDR_SHIFT),
+        .shift  = 10,
         .flags  = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static void __init nuc900_clocksource_init(unsigned int rate)
+static void __init nuc900_clocksource_init(void)
 {
         unsigned int val;
+        unsigned int rate;
+        struct clk *clk = clk_get(NULL, "timer1");
+
+        BUG_ON(IS_ERR(clk));
+
+        __raw_writel(0x00, REG_TCSR1);
+
+        clk_enable(clk);
+        rate = clk_get_rate(clk) / (PRESCALE + 1);
 
         __raw_writel(0xffffffff, REG_TICR1);
 
         val = __raw_readl(REG_TCSR1);
-        val |= (COUNTEN | PERIOD);
+        val |= (COUNTEN | PERIOD | PRESCALE);
         __raw_writel(val, REG_TCSR1);
 
         clocksource_nuc900.mult =
@@ -156,25 +183,8 @@ static void __init nuc900_clocksource_init(unsigned int rate)
 
 static void __init nuc900_timer_init(void)
 {
-        struct clk *ck_ext = clk_get(NULL, "ext");
-        unsigned int    rate;
-
-        BUG_ON(IS_ERR(ck_ext));
-
-        rate = clk_get_rate(ck_ext);
-        clk_put(ck_ext);
-        rate = rate / (PRESCALE + 0x01);
-
-         /* set a known state */
-        __raw_writel(0x00, REG_TCSR0);
-        __raw_writel(0x00, REG_TCSR1);
-        __raw_writel(RESETINT, REG_TISR);
-        timer0_load = (rate / TICKS_PER_SEC);
-
-        setup_irq(IRQ_TIMER0, &nuc900_timer0_irq);
-
-        nuc900_clocksource_init(rate);
-        nuc900_clockevents_init(rate);
+        nuc900_clocksource_init();
+        nuc900_clockevents_init();
 }
 
 struct sys_timer nuc900_timer = {
diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S
index a26a605b73bd..0cb1848bd876 100644
--- a/arch/arm/mm/tlb-v7.S
+++ b/arch/arm/mm/tlb-v7.S
@@ -40,7 +40,6 @@ ENTRY(v7wbi_flush_user_tlb_range)
         asid    r3, r3                          @ mask ASID
         orr     r0, r3, r0, lsl #PAGE_SHIFT     @ Create initial MVA
         mov     r1, r1, lsl #PAGE_SHIFT
-        vma_vm_flags r2, r2                     @ get vma->vm_flags
 1:
 #ifdef CONFIG_SMP
         mcr     p15, 0, r0, c8, c3, 1           @ TLB invalidate U MVA (shareable) 
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
index 810c47f56e77..9af494f0ab3d 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
@@ -58,19 +58,19 @@
 
 #define MX25_PAD_A18__A18               IOMUX_PAD(0x23c, 0x020, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_A18__GPIO_2_4          IOMUX_PAD(0x23c, 0x020, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A18__FEC_COL           IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTL)
+#define MX25_PAD_A18__FEC_COL           IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_A19__A19               IOMUX_PAD(0x240, 0x024, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A19__FEC_RX_ER         IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTL)
+#define MX25_PAD_A19__FEC_RX_ER         IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTRL)
 #define MX25_PAD_A19__GPIO_2_5          IOMUX_PAD(0x240, 0x024, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_A20__A20               IOMUX_PAD(0x244, 0x028, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_A20__GPIO_2_6          IOMUX_PAD(0x244, 0x028, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A20__FEC_RDATA2        IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTL)
+#define MX25_PAD_A20__FEC_RDATA2        IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_A21__A21               IOMUX_PAD(0x248, 0x02c, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_A21__GPIO_2_7          IOMUX_PAD(0x248, 0x02c, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A21__FEC_RDATA3        IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTL)
+#define MX25_PAD_A21__FEC_RDATA3        IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_A22__A22               IOMUX_PAD(0x000, 0x030, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_A22__GPIO_2_8          IOMUX_PAD(0x000, 0x030, 0x15, 0, 0, NO_PAD_CTRL)
@@ -80,11 +80,11 @@
 
 #define MX25_PAD_A24__A24               IOMUX_PAD(0x250, 0x038, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_A24__GPIO_2_10         IOMUX_PAD(0x250, 0x038, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A24__FEC_RX_CLK        IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTL)
+#define MX25_PAD_A24__FEC_RX_CLK        IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_A25__A25               IOMUX_PAD(0x254, 0x03c, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_A25__GPIO_2_11         IOMUX_PAD(0x254, 0x03c, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A25__FEC_CRS           IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTL)
+#define MX25_PAD_A25__FEC_CRS           IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_EB0__EB0               IOMUX_PAD(0x258, 0x040, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_EB0__AUD4_TXD          IOMUX_PAD(0x258, 0x040, 0x14, 0x464, 0, NO_PAD_CTRL)
@@ -112,7 +112,7 @@
 #define MX25_PAD_CS5__UART5_RTS         IOMUX_PAD(0x268, 0x058, 0x13, 0x574, 0, NO_PAD_CTRL)
 #define MX25_PAD_CS5__GPIO_3_21         IOMUX_PAD(0x268, 0x058, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_NF_CE0__NF_CE0         IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_NF_CE0__NF_CE0         IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_NF_CE0__GPIO_3_22      IOMUX_PAD(0x26c, 0x05c, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_ECB__ECB               IOMUX_PAD(0x270, 0x060, 0x10, 0, 0, NO_PAD_CTRL)
@@ -229,28 +229,28 @@
 #define MX25_PAD_LD7__GPIO_1_21         IOMUX_PAD(0x2dc, 0x0e4, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_LD8__LD8               IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD8__FEC_TX_ERR        IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_LD8__FEC_TX_ERR        IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_LD9__LD9               IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD9__FEC_COL           IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTL)
+#define MX25_PAD_LD9__FEC_COL           IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_LD10__LD10             IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD10__FEC_RX_ER        IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTL)
+#define MX25_PAD_LD10__FEC_RX_ER        IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_LD11__LD11             IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD11__FEC_RDATA2       IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTL)
+#define MX25_PAD_LD11__FEC_RDATA2       IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_LD12__LD12             IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD12__FEC_RDATA3       IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTL)
+#define MX25_PAD_LD12__FEC_RDATA3       IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_LD13__LD13             IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD13__FEC_TDATA2       IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_LD13__FEC_TDATA2       IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_LD14__LD14             IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD14__FEC_TDATA3       IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_LD14__FEC_TDATA3       IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_LD15__LD15             IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD15__FEC_RX_CLK       IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTL)
+#define MX25_PAD_LD15__FEC_RX_CLK       IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_HSYNC__HSYNC           IOMUX_PAD(0x300, 0x108, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_HSYNC__GPIO_1_22       IOMUX_PAD(0x300, 0x108, 0x15, 0, 0, NO_PAD_CTRL)
@@ -265,7 +265,7 @@
 #define MX25_PAD_OE_ACD__GPIO_1_25      IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_CONTRAST__CONTRAST     IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CONTRAST__FEC_CRS      IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTL)
+#define MX25_PAD_CONTRAST__FEC_CRS      IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_PWM__PWM               IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_PWM__GPIO_1_26         IOMUX_PAD(0x314, 0x11c, 0x15, 0, 0, NO_PAD_CTRL)
@@ -354,19 +354,19 @@
 #define MX25_PAD_UART2_TXD__GPIO_4_27   IOMUX_PAD(0x37c, 0x184, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_UART2_RTS__UART2_RTS   IOMUX_PAD(0x380, 0x188, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_UART2_RTS__FEC_COL     IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTL)
+#define MX25_PAD_UART2_RTS__FEC_COL     IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTRL)
 #define MX25_PAD_UART2_RTS__GPIO_4_28   IOMUX_PAD(0x380, 0x188, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_UART2_CTS__FEC_RX_ER   IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTL)
+#define MX25_PAD_UART2_CTS__FEC_RX_ER   IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTRL)
 #define MX25_PAD_UART2_CTS__UART2_CTS   IOMUX_PAD(0x384, 0x18c, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_UART2_CTS__GPIO_4_29   IOMUX_PAD(0x384, 0x18c, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_SD1_CMD__SD1_CMD       IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_CMD__FEC_RDATA2    IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_CMD__FEC_RDATA2    IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTRL)
 #define MX25_PAD_SD1_CMD__GPIO_2_23     IOMUX_PAD(0x388, 0x190, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_SD1_CLK__SD1_CLK       IOMUX_PAD(0x38c, 0x194, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_CLK__FEC_RDATA3    IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_CLK__FEC_RDATA3    IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTRL)
 #define MX25_PAD_SD1_CLK__GPIO_2_24     IOMUX_PAD(0x38c, 0x194, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_SD1_DATA0__SD1_DATA0   IOMUX_PAD(0x390, 0x198, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
@@ -377,11 +377,11 @@
 #define MX25_PAD_SD1_DATA1__GPIO_2_26   IOMUX_PAD(0x394, 0x19c, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_SD1_DATA2__SD1_DATA2   IOMUX_PAD(0x398, 0x1a0, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_DATA2__FEC_RX_CLK  IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_DATA2__FEC_RX_CLK  IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTRL)
 #define MX25_PAD_SD1_DATA2__GPIO_2_27   IOMUX_PAD(0x398, 0x1a0, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_SD1_DATA3__SD1_DATA3   IOMUX_PAD(0x39c, 0x1a4, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_DATA3__FEC_CRS     IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_DATA3__FEC_CRS     IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTRL)
 #define MX25_PAD_SD1_DATA3__GPIO_2_28   IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_KPP_ROW0__KPP_ROW0     IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, PAD_CTL_PKE)
@@ -410,7 +410,7 @@
 #define MX25_PAD_KPP_COL3__KPP_COL3     IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
 #define MX25_PAD_KPP_COL3__GPIO_3_4     IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_MDC__FEC_MDC       IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_MDC__FEC_MDC       IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_FEC_MDC__AUD4_TXD      IOMUX_PAD(0x3c0, 0x1c8, 0x12, 0x464, 1, NO_PAD_CTRL)
 #define MX25_PAD_FEC_MDC__GPIO_3_5      IOMUX_PAD(0x3c0, 0x1c8, 0x15, 0, 0, NO_PAD_CTRL)
 
@@ -418,23 +418,23 @@
 #define MX25_PAD_FEC_MDIO__AUD4_RXD     IOMUX_PAD(0x3c4, 0x1cc, 0x12, 0x460, 1, NO_PAD_CTRL)
 #define MX25_PAD_FEC_MDIO__GPIO_3_6     IOMUX_PAD(0x3c4, 0x1cc, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_FEC_TDATA0__GPIO_3_7   IOMUX_PAD(0x3c8, 0x1d0, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_FEC_TDATA1__AUD4_TXFS  IOMUX_PAD(0x3cc, 0x1d4, 0x12, 0x474, 1, NO_PAD_CTRL)
 #define MX25_PAD_FEC_TDATA1__GPIO_3_8   IOMUX_PAD(0x3cc, 0x1d4, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_TX_EN__FEC_TX_EN   IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TX_EN__FEC_TX_EN   IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_FEC_TX_EN__GPIO_3_9    IOMUX_PAD(0x3d0, 0x1d8, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
 #define MX25_PAD_FEC_RDATA0__GPIO_3_10  IOMUX_PAD(0x3d4, 0x1dc, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
 #define MX25_PAD_FEC_RDATA1__GPIO_3_11  IOMUX_PAD(0x3d8, 0x1e0, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_RX_DV__FEC_RX_DV   IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RX_DV__FEC_RX_DV   IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
 #define MX25_PAD_FEC_RX_DV__CAN2_RX     IOMUX_PAD(0x3dc, 0x1e4, 0x14, 0x484, 0, PAD_CTL_PUS_22K_UP)
 #define MX25_PAD_FEC_RX_DV__GPIO_3_12   IOMUX_PAD(0x3dc, 0x1e4, 0x15, 0, 0, NO_PAD_CTRL)
 
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
index 91e738144804..854e2dc58481 100644
--- a/arch/arm/plat-mxc/include/mach/mx25.h
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -41,4 +41,8 @@
 #define UART1_BASE_ADDR                 0x43f90000
 #define UART2_BASE_ADDR                 0x43f94000
 
+#define MX25_FEC_BASE_ADDR              0x50038000
+
+#define MX25_INT_FEC    57
+
 #endif /* __MACH_MX25_H__ */
diff --git a/arch/arm/plat-pxa/pwm.c b/arch/arm/plat-pxa/pwm.c
index a9eabdcfa163..51dc5c8106c0 100644
--- a/arch/arm/plat-pxa/pwm.c
+++ b/arch/arm/plat-pxa/pwm.c
@@ -204,14 +204,14 @@ static int __devinit pwm_probe(struct platform_device *pdev)
                 goto err_free_clk;
         }
 
-        r = request_mem_region(r->start, r->end - r->start + 1, pdev->name);
+        r = request_mem_region(r->start, resource_size(r), pdev->name);
         if (r == NULL) {
                 dev_err(&pdev->dev, "failed to request memory resource\n");
                 ret = -EBUSY;
                 goto err_free_clk;
         }
 
-        pwm->mmio_base = ioremap(r->start, r->end - r->start + 1);
+        pwm->mmio_base = ioremap(r->start, resource_size(r));
         if (pwm->mmio_base == NULL) {
                 dev_err(&pdev->dev, "failed to ioremap() registers\n");
                 ret = -ENODEV;
@@ -241,7 +241,7 @@ static int __devinit pwm_probe(struct platform_device *pdev)
         return 0;
 
 err_free_mem:
-        release_mem_region(r->start, r->end - r->start + 1);
+        release_mem_region(r->start, resource_size(r));
 err_free_clk:
         clk_put(pwm->clk);
 err_free:
@@ -271,7 +271,7 @@ static int __devexit pwm_remove(struct platform_device *pdev)
         iounmap(pwm->mmio_base);
 
         r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-        release_mem_region(r->start, r->end - r->start + 1);
+        release_mem_region(r->start, resource_size(r));
 
         clk_put(pwm->clk);
         kfree(pwm);
diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-s3c/dev-nand.c
index e771e77dcd54..84808ccda70e 100644
--- a/arch/arm/plat-s3c/dev-nand.c
+++ b/arch/arm/plat-s3c/dev-nand.c
@@ -114,7 +114,7 @@ void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand)
                 
                 for (i = 0; i < npd->nr_sets; i++) {
                         ret = s3c_nand_copy_set(to);
-                        if (!ret) {
+                        if (ret) {
                                 printk(KERN_ERR "%s: failed to copy set %d\n",
                                 __func__, i);
                                 return;
@@ -122,6 +122,8 @@ void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand)
                         to++;
                 }
         }
+
+        s3c_device_nand.dev.platform_data = npd;
 }
 
 EXPORT_SYMBOL_GPL(s3c_nand_set_platdata);
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 932cbbbb4273..c1c20b023917 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -31,6 +31,7 @@ extern struct platform_device s3c64xx_device_iisv4;
 extern struct platform_device s3c64xx_device_pcm0;
 extern struct platform_device s3c64xx_device_pcm1;
 
+extern struct platform_device s3c_device_ts;
 extern struct platform_device s3c_device_fb;
 extern struct platform_device s3c_device_usb;
 extern struct platform_device s3c_device_lcd;
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index f52a92ce8dda..7f686a31e672 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -37,6 +37,8 @@
 #include <plat/cpu.h>
 #include <plat/regs-spi.h>
 
+#include <mach/ts.h>
+
 /* Serial port registrations */
 
 static struct resource s3c2410_uart0_resource[] = {
@@ -182,6 +184,22 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
         }
 }
 
+/* Touchscreen */
+struct platform_device s3c_device_ts = {
+        .name             = "s3c2410-ts",
+        .id               = -1,
+};
+EXPORT_SYMBOL(s3c_device_ts);
+
+static struct s3c2410_ts_mach_info s3c2410ts_info;
+
+void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_info)
+{
+        memcpy(&s3c2410ts_info, hard_s3c2410ts_info, sizeof(struct s3c2410_ts_mach_info));
+        s3c_device_ts.dev.platform_data = &s3c2410ts_info;
+}
+EXPORT_SYMBOL(s3c24xx_ts_set_platdata);
+
 /* USB Device (Gadget)*/
 
 static struct resource s3c_usbgadget_resource[] = {
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
index 1364317d421e..12623a474b54 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/plat-s3c24xx/s3c244x.c
@@ -70,6 +70,7 @@ void __init s3c244x_map_io(void)
         s3c_device_sdi.name  = "s3c2440-sdi";
         s3c_device_i2c0.name  = "s3c2440-i2c";
         s3c_device_nand.name = "s3c2440-nand";
+        s3c_device_ts.name = "s3c2440-ts";
         s3c_device_usbgadget.name = "s3c2440-usbgadget";
 }