66 files changed, 315 insertions, 135 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a48aecc17eac..dfb0312f4e73 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1280,7 +1280,7 @@ config ARM_ERRATA_743622
        depends on CPU_V7
        help
          This option enables the workaround for the 743622 Cortex-A9
-          (r2p0..r2p2) erratum. Under very rare conditions, a faulty
+          (r2p*) erratum. Under very rare conditions, a faulty
          optimisation in the Cortex-A9 Store Buffer may lead to data
          corruption. This workaround sets a specific bit in the diagnostic
          register of the Cortex-A9 which disables the Store Buffer
diff --git a/arch/arm/boot/.gitignore b/arch/arm/boot/.gitignore
index ce1c5ff746e7..3c79f85975aa 100644
--- a/arch/arm/boot/.gitignore
+++ b/arch/arm/boot/.gitignore
@@ -3,3 +3,4 @@ zImage
 xipImage
 bootpImage
 uImage
+*.dtb
diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h
index b5a5be2536c1..90114faa9f3c 100644
--- a/arch/arm/include/asm/pmu.h
+++ b/arch/arm/include/asm/pmu.h
@@ -134,7 +134,7 @@ int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type);
 u64 armpmu_event_update(struct perf_event *event,
                        struct hw_perf_event *hwc,
-                        int idx, int overflow);
+                        int idx);
 int armpmu_event_set_period(struct perf_event *event,
                            struct hw_perf_event *hwc,
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index 4dd0edab6a65..1651d4950744 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -242,6 +242,7 @@ static void ecard_init_pgtables(struct mm_struct *mm)
        memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE));
+        vma.vm_flags = VM_EXEC;
        vma.vm_mm = mm;
        flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE);
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 5bb91bf3d47f..b2abfa18f137 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -180,7 +180,7 @@ armpmu_event_set_period(struct perf_event *event,
 u64
 armpmu_event_update(struct perf_event *event,
                    struct hw_perf_event *hwc,
-                    int idx, int overflow)
+                    int idx)
 {
        struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
        u64 delta, prev_raw_count, new_raw_count;
@@ -193,13 +193,7 @@ again:
                             new_raw_count) != prev_raw_count)
                goto again;
-        new_raw_count &= armpmu->max_period;
+        delta = (new_raw_count - prev_raw_count) & armpmu->max_period;
-        prev_raw_count &= armpmu->max_period;
-        if (overflow)
-                delta = armpmu->max_period - prev_raw_count + new_raw_count + 1;
-        else
-                delta = new_raw_count - prev_raw_count;
        local64_add(delta, &event->count);
        local64_sub(delta, &hwc->period_left);
@@ -216,7 +210,7 @@ armpmu_read(struct perf_event *event)
        if (hwc->idx < 0)
                return;
-        armpmu_event_update(event, hwc, hwc->idx, 0);
+        armpmu_event_update(event, hwc, hwc->idx);
 }
 static void
@@ -232,7 +226,7 @@ armpmu_stop(struct perf_event *event, int flags)
        if (!(hwc->state & PERF_HES_STOPPED)) {
                armpmu->disable(hwc, hwc->idx);
                barrier(); /* why? */
-                armpmu_event_update(event, hwc, hwc->idx, 0);
+                armpmu_event_update(event, hwc, hwc->idx);
                hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
        }
 }
@@ -518,7 +512,13 @@ __hw_perf_event_init(struct perf_event *event)
        hwc->config_base            |= (unsigned long)mapping;
        if (!hwc->sample_period) {
-                hwc->sample_period  = armpmu->max_period;
+                /*
+                 * For non-sampling runs, limit the sample_period to half
+                 * of the counter width. That way, the new counter value
+                 * is far less likely to overtake the previous one unless
+                 * you have some serious IRQ latency issues.
+                 */
+                hwc->sample_period  = armpmu->max_period >> 1;
                hwc->last_period    = hwc->sample_period;
                local64_set(&hwc->period_left, hwc->sample_period);
        }
@@ -680,6 +680,28 @@ static void __init cpu_pmu_init(struct arm_pmu *armpmu)
 }
 /*
+ * PMU hardware loses all context when a CPU goes offline.
+ * When a CPU is hotplugged back in, since some hardware registers are
+ * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading
+ * junk values out of them.
+ */
+static int __cpuinit pmu_cpu_notify(struct notifier_block *b,
+                                        unsigned long action, void *hcpu)
+{
+        if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING)
+                return NOTIFY_DONE;
+        if (cpu_pmu && cpu_pmu->reset)
+                cpu_pmu->reset(NULL);
+        return NOTIFY_OK;
+}
+static struct notifier_block __cpuinitdata pmu_cpu_notifier = {
+        .notifier_call = pmu_cpu_notify,
+};
+/*
 * CPU PMU identification and registration.
 */
 static int __init
@@ -730,6 +752,7 @@ init_hw_perf_events(void)
                pr_info("enabled with %s PMU driver, %d counters available\n",
                        cpu_pmu->name, cpu_pmu->num_events);
                cpu_pmu_init(cpu_pmu);
+                register_cpu_notifier(&pmu_cpu_notifier);
                armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW);
        } else {
                pr_info("no hardware support available\n");
diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c
index 533be9930ec2..b78af0cc6ef3 100644
--- a/arch/arm/kernel/perf_event_v6.c
+++ b/arch/arm/kernel/perf_event_v6.c
@@ -467,23 +467,6 @@ armv6pmu_enable_event(struct hw_perf_event *hwc,
        raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
-static int counter_is_active(unsigned long pmcr, int idx)
-{
-        unsigned long mask = 0;
-        if (idx == ARMV6_CYCLE_COUNTER)
-                mask = ARMV6_PMCR_CCOUNT_IEN;
-        else if (idx == ARMV6_COUNTER0)
-                mask = ARMV6_PMCR_COUNT0_IEN;
-        else if (idx == ARMV6_COUNTER1)
-                mask = ARMV6_PMCR_COUNT1_IEN;
-        if (mask)
-                return pmcr & mask;
-        WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-        return 0;
-}
 static irqreturn_t
 armv6pmu_handle_irq(int irq_num,
                    void *dev)
@@ -513,7 +496,8 @@ armv6pmu_handle_irq(int irq_num,
                struct perf_event *event = cpuc->events[idx];
                struct hw_perf_event *hwc;
-                if (!counter_is_active(pmcr, idx))
+                /* Ignore if we don't have an event. */
+                if (!event)
                        continue;
                /*
@@ -524,7 +508,7 @@ armv6pmu_handle_irq(int irq_num,
                        continue;
                hwc = &event->hw;
-                armpmu_event_update(event, hwc, idx, 1);
+                armpmu_event_update(event, hwc, idx);
                data.period = event->hw.last_period;
                if (!armpmu_event_set_period(event, hwc, idx))
                        continue;
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 6933244c68f9..4d7095af2ab3 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -809,6 +809,11 @@ static inline int armv7_pmnc_disable_intens(int idx)
        counter = ARMV7_IDX_TO_COUNTER(idx);
        asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter)));
+        isb();
+        /* Clear the overflow flag in case an interrupt is pending. */
+        asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (BIT(counter)));
+        isb();
        return idx;
 }
@@ -955,6 +960,10 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
                struct perf_event *event = cpuc->events[idx];
                struct hw_perf_event *hwc;
+                /* Ignore if we don't have an event. */
+                if (!event)
+                        continue;
                /*
                 * We have a single interrupt for all counters. Check that
                 * each counter has overflowed before we process it.
@@ -963,7 +972,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
                        continue;
                hwc = &event->hw;
-                armpmu_event_update(event, hwc, idx, 1);
+                armpmu_event_update(event, hwc, idx);
                data.period = event->hw.last_period;
                if (!armpmu_event_set_period(event, hwc, idx))
                        continue;
diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c
index 3b99d8269829..71a21e6712f5 100644
--- a/arch/arm/kernel/perf_event_xscale.c
+++ b/arch/arm/kernel/perf_event_xscale.c
@@ -255,11 +255,14 @@ xscale1pmu_handle_irq(int irq_num, void *dev)
                struct perf_event *event = cpuc->events[idx];
                struct hw_perf_event *hwc;
+                if (!event)
+                        continue;
                if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
                        continue;
                hwc = &event->hw;
-                armpmu_event_update(event, hwc, idx, 1);
+                armpmu_event_update(event, hwc, idx);
                data.period = event->hw.last_period;
                if (!armpmu_event_set_period(event, hwc, idx))
                        continue;
@@ -592,11 +595,14 @@ xscale2pmu_handle_irq(int irq_num, void *dev)
                struct perf_event *event = cpuc->events[idx];
                struct hw_perf_event *hwc;
-                if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx))
+                if (!event)
+                        continue;
+                if (!xscale2_pmnc_counter_has_overflowed(of_flags, idx))
                        continue;
                hwc = &event->hw;
-                armpmu_event_update(event, hwc, idx, 1);
+                armpmu_event_update(event, hwc, idx);
                data.period = event->hw.last_period;
                if (!armpmu_event_set_period(event, hwc, idx))
                        continue;
@@ -663,7 +669,7 @@ xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx)
 static void
 xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
 {
-        unsigned long flags, ien, evtsel;
+        unsigned long flags, ien, evtsel, of_flags;
        struct pmu_hw_events *events = cpu_pmu->get_hw_events();
        ien = xscale2pmu_read_int_enable();
@@ -672,26 +678,31 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
        switch (idx) {
        case XSCALE_CYCLE_COUNTER:
                ien &= ~XSCALE2_CCOUNT_INT_EN;
+                of_flags = XSCALE2_CCOUNT_OVERFLOW;
                break;
        case XSCALE_COUNTER0:
                ien &= ~XSCALE2_COUNT0_INT_EN;
                evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
                evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT;
+                of_flags = XSCALE2_COUNT0_OVERFLOW;
                break;
        case XSCALE_COUNTER1:
                ien &= ~XSCALE2_COUNT1_INT_EN;
                evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
                evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT;
+                of_flags = XSCALE2_COUNT1_OVERFLOW;
                break;
        case XSCALE_COUNTER2:
                ien &= ~XSCALE2_COUNT2_INT_EN;
                evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
                evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT;
+                of_flags = XSCALE2_COUNT2_OVERFLOW;
                break;
        case XSCALE_COUNTER3:
                ien &= ~XSCALE2_COUNT3_INT_EN;
                evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
                evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT;
+                of_flags = XSCALE2_COUNT3_OVERFLOW;
                break;
        default:
                WARN_ONCE(1, "invalid counter number (%d)\n", idx);
@@ -701,6 +712,7 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
        raw_spin_lock_irqsave(&events->pmu_lock, flags);
        xscale2pmu_write_event_select(evtsel);
        xscale2pmu_write_int_enable(ien);
+        xscale2pmu_write_overflow_flags(of_flags);
        raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index b7582dd10dc3..96e2adcd5a84 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -38,10 +38,6 @@
 #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
 static u64 hdmac_dmamask = DMA_BIT_MASK(32);
-static struct at_dma_platform_data atdma_pdata = {
-        .nr_channels    = 8,
-};
 static struct resource hdmac_resources[] = {
        [0] = {
                .start  = AT91SAM9G45_BASE_DMA,
@@ -56,12 +52,11 @@ static struct resource hdmac_resources[] = {
 };
 static struct platform_device at_hdmac_device = {
-        .name           = "at_hdmac",
+        .name           = "at91sam9g45_dma",
        .id             = -1,
        .dev            = {
                                .dma_mask               = &hdmac_dmamask,
                                .coherent_dma_mask      = DMA_BIT_MASK(32),
-                                .platform_data          = &atdma_pdata,
        },
        .resource       = hdmac_resources,
        .num_resources  = ARRAY_SIZE(hdmac_resources),
@@ -69,9 +64,15 @@ static struct platform_device at_hdmac_device = {
 void __init at91_add_device_hdmac(void)
 {
-        dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
+#if defined(CONFIG_OF)
-        dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask);
+        struct device_node *of_node =
-        platform_device_register(&at_hdmac_device);
+                of_find_node_by_name(NULL, "dma-controller");
+        if (of_node)
+                of_node_put(of_node);
+        else
+#endif
+                platform_device_register(&at_hdmac_device);
 }
 #else
 void __init at91_add_device_hdmac(void) {}
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 61908dce9784..9be71c11d0f0 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -33,10 +33,6 @@
 #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
 static u64 hdmac_dmamask = DMA_BIT_MASK(32);
-static struct at_dma_platform_data atdma_pdata = {
-        .nr_channels    = 2,
-};
 static struct resource hdmac_resources[] = {
        [0] = {
                .start  = AT91SAM9RL_BASE_DMA,
@@ -51,12 +47,11 @@ static struct resource hdmac_resources[] = {
 };
 static struct platform_device at_hdmac_device = {
-        .name           = "at_hdmac",
+        .name           = "at91sam9rl_dma",
        .id             = -1,
        .dev            = {
                                .dma_mask               = &hdmac_dmamask,
                                .coherent_dma_mask      = DMA_BIT_MASK(32),
-                                .platform_data          = &atdma_pdata,
        },
        .resource       = hdmac_resources,
        .num_resources  = ARRAY_SIZE(hdmac_resources),
@@ -64,7 +59,6 @@ static struct platform_device at_hdmac_device = {
 void __init at91_add_device_hdmac(void)
 {
-        dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
        platform_device_register(&at_hdmac_device);
 }
 #else
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index d5fb44f16d31..d67d0b4feb6f 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -34,6 +34,7 @@
 #include <mach/ep93xx_spi.h>
 #include <mach/gpio-ep93xx.h>
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
@@ -361,6 +362,7 @@ MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
        .atag_offset    = 0x100,
        .map_io         = vision_map_io,
        .init_irq       = ep93xx_init_irq,
+        .handle_irq     = vic_handle_irq,
        .timer          = &ep93xx_timer,
        .init_machine   = vision_init_machine,
        .restart        = ep93xx_restart,
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 0fc65ffde8ff..38939956c34f 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
+#include <linux/interrupt.h>
 #include <linux/fb.h>
 #include <linux/mfd/max8998.h>
 #include <linux/regulator/machine.h>
@@ -595,6 +596,7 @@ static struct mxt_platform_data qt602240_platform_data = {
        .threshold      = 0x28,
        .voltage        = 2800000,              /* 2.8V */
        .orient         = MXT_DIAGONAL,
+        .irqflags       = IRQF_TRIGGER_FALLING,
 };
 static struct i2c_board_info i2c3_devs[] __initdata = {
diff --git a/arch/arm/mach-lpc32xx/include/mach/irqs.h b/arch/arm/mach-lpc32xx/include/mach/irqs.h
index 2667f52e3b04..9e3b90df32e1 100644
--- a/arch/arm/mach-lpc32xx/include/mach/irqs.h
+++ b/arch/arm/mach-lpc32xx/include/mach/irqs.h
@@ -61,7 +61,7 @@
 */
 #define IRQ_LPC32XX_JTAG_COMM_TX        LPC32XX_SIC1_IRQ(1)
 #define IRQ_LPC32XX_JTAG_COMM_RX        LPC32XX_SIC1_IRQ(2)
-#define IRQ_LPC32XX_GPI_11              LPC32XX_SIC1_IRQ(4)
+#define IRQ_LPC32XX_GPI_28              LPC32XX_SIC1_IRQ(4)
 #define IRQ_LPC32XX_TS_P                LPC32XX_SIC1_IRQ(6)
 #define IRQ_LPC32XX_TS_IRQ              LPC32XX_SIC1_IRQ(7)
 #define IRQ_LPC32XX_TS_AUX              LPC32XX_SIC1_IRQ(8)
diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c
index 4eae566dfdc7..c74de01ab5b6 100644
--- a/arch/arm/mach-lpc32xx/irq.c
+++ b/arch/arm/mach-lpc32xx/irq.c
@@ -118,6 +118,10 @@ static const struct lpc32xx_event_info lpc32xx_events[NR_IRQS] = {
                .event_group = &lpc32xx_event_pin_regs,
                .mask = LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT,
        },
+        [IRQ_LPC32XX_GPI_28] = {
+                .event_group = &lpc32xx_event_pin_regs,
+                .mask = LPC32XX_CLKPWR_EXTSRC_GPI_28_BIT,
+        },
        [IRQ_LPC32XX_GPIO_00] = {
                .event_group = &lpc32xx_event_int_regs,
                .mask = LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT,
@@ -305,9 +309,18 @@ static int lpc32xx_irq_wake(struct irq_data *d, unsigned int state)
                if (state)
                        eventreg |= lpc32xx_events[d->irq].mask;
-                else
+                else {
                        eventreg &= ~lpc32xx_events[d->irq].mask;
+                        /*
+                         * When disabling the wakeup, clear the latched
+                         * event
+                         */
+                        __raw_writel(lpc32xx_events[d->irq].mask,
+                                lpc32xx_events[d->irq].
+                                event_group->rawstat_reg);
+                }
                __raw_writel(eventreg,
                        lpc32xx_events[d->irq].event_group->enab_reg);
@@ -380,13 +393,15 @@ void __init lpc32xx_init_irq(void)
        /* Setup SIC1 */
        __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE));
-        __raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE));
+        __raw_writel(SIC1_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE));
-        __raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE));
+        __raw_writel(SIC1_ATR_DEFAULT,
+                                LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE));
        /* Setup SIC2 */
        __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE));
-        __raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE));
+        __raw_writel(SIC2_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE));
-        __raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE));
+        __raw_writel(SIC2_ATR_DEFAULT,
+                                LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE));
        /* Configure supported IRQ's */
        for (i = 0; i < NR_IRQS; i++) {
diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c
index 429cfdbb2b3d..f2735281616a 100644
--- a/arch/arm/mach-lpc32xx/serial.c
+++ b/arch/arm/mach-lpc32xx/serial.c
@@ -88,6 +88,7 @@ struct uartinit {
        char *uart_ck_name;
        u32 ck_mode_mask;
        void __iomem *pdiv_clk_reg;
+        resource_size_t mapbase;
 };
 static struct uartinit uartinit_data[] __initdata = {
@@ -97,6 +98,7 @@ static struct uartinit uartinit_data[] __initdata = {
                .ck_mode_mask =
                        LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 5),
                .pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL,
+                .mapbase = LPC32XX_UART5_BASE,
        },
 #endif
 #ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
@@ -105,6 +107,7 @@ static struct uartinit uartinit_data[] __initdata = {
                .ck_mode_mask =
                        LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 3),
                .pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL,
+                .mapbase = LPC32XX_UART3_BASE,
        },
 #endif
 #ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
@@ -113,6 +116,7 @@ static struct uartinit uartinit_data[] __initdata = {
                .ck_mode_mask =
                        LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 4),
                .pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL,
+                .mapbase = LPC32XX_UART4_BASE,
        },
 #endif
 #ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
@@ -121,6 +125,7 @@ static struct uartinit uartinit_data[] __initdata = {
                .ck_mode_mask =
                        LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 6),
                .pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL,
+                .mapbase = LPC32XX_UART6_BASE,
        },
 #endif
 };
@@ -165,11 +170,24 @@ void __init lpc32xx_serial_init(void)
                /* pre-UART clock divider set to 1 */
                __raw_writel(0x0101, uartinit_data[i].pdiv_clk_reg);
+                /*
+                 * Force a flush of the RX FIFOs to work around a
+                 * HW bug
+                 */
+                puart = uartinit_data[i].mapbase;
+                __raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));
+                __raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart));
+                j = LPC32XX_SUART_FIFO_SIZE;
+                while (j--)
+                        tmp = __raw_readl(
+                                LPC32XX_UART_DLL_FIFO(puart));
+                __raw_writel(0, LPC32XX_UART_IIR_FCR(puart));
        }
        /* This needs to be done after all UART clocks are setup */
        __raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE);
-        for (i = 0; i < ARRAY_SIZE(uartinit_data) - 1; i++) {
+        for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) {
                /* Force a flush of the RX FIFOs to work around a HW bug */
                puart = serial_std_platform_data[i].mapbase;
                __raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 17cb76060125..3588a5584153 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -17,7 +17,6 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/interrupt.h>
-#include <linux/gpio.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 7bc17eaa12eb..ada1213982b4 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -24,7 +24,6 @@
 #include <mach/dma.h>
 #include <mach/devices.h>
 #include <mach/mfp.h>
-#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <mach/pxa168.h>
diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c
index 8e3b5af04a57..bc97170125bf 100644
--- a/arch/arm/mach-mmp/tavorevb.c
+++ b/arch/arm/mach-mmp/tavorevb.c
@@ -12,7 +12,6 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/smc91x.h>
-#include <linux/gpio.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 309369ea6978..be2002f42dea 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -416,13 +416,13 @@ static void __init innovator_init(void)
 #ifdef CONFIG_ARCH_OMAP15XX
        if (cpu_is_omap1510()) {
                omap1_usb_init(&innovator1510_usb_config);
-                innovator_config[1].data = &innovator1510_lcd_config;
+                innovator_config[0].data = &innovator1510_lcd_config;
        }
 #endif
 #ifdef CONFIG_ARCH_OMAP16XX
        if (cpu_is_omap1610()) {
                omap1_usb_init(&h2_usb_config);
-                innovator_config[1].data = &innovator1610_lcd_config;
+                innovator_config[0].data = &innovator1610_lcd_config;
        }
 #endif
        omap_board_config = innovator_config;
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index d965da45160e..e20c8ab80b0e 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -364,8 +364,8 @@ config OMAP3_SDRC_AC_TIMING
          going on could result in system crashes;
 config OMAP4_ERRATA_I688
-        bool "OMAP4 errata: Async Bridge Corruption (BROKEN)"
+        bool "OMAP4 errata: Async Bridge Corruption"
-        depends on ARCH_OMAP4 && BROKEN
+        depends on ARCH_OMAP4
        select ARCH_HAS_BARRIERS
        help
          If a data is stalled inside asynchronous bridge because of back
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 42a4d11fad23..672262717601 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -371,7 +371,11 @@ static void n8x0_mmc_callback(void *data, u8 card_mask)
        else
                *openp = 0;
+#ifdef CONFIG_MMC_OMAP
        omap_mmc_notify_cover_event(mmc_device, index, *openp);
+#else
+        pr_warn("MMC: notify cover event not available\n");
+#endif
 }
 static int n8x0_mmc_late_init(struct device *dev)
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index c775bead1497..c877236a8442 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -381,7 +381,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
        gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI");
        /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
-        gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+        gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1;
        platform_device_register(&leds_gpio);
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index febffde2ff10..7e9338e8d684 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -132,6 +132,7 @@ void omap3_map_io(void);
 void am33xx_map_io(void);
 void omap4_map_io(void);
 void ti81xx_map_io(void);
+void omap_barriers_init(void);
 /**
 * omap_test_timeout - busy-loop, testing a condition
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index cfdbb86bc84e..72e018b9b260 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -65,7 +65,6 @@ static int omap4_enter_idle(struct cpuidle_device *dev,
        struct timespec ts_preidle, ts_postidle, ts_idle;
        u32 cpu1_state;
        int idle_time;
-        int new_state_idx;
        int cpu_id = smp_processor_id();
        /* Used to keep track of the total time in idle */
@@ -84,8 +83,8 @@ static int omap4_enter_idle(struct cpuidle_device *dev,
         */
        cpu1_state = pwrdm_read_pwrst(cpu1_pd);
        if (cpu1_state != PWRDM_POWER_OFF) {
-                new_state_idx = drv->safe_state_index;
+                index = drv->safe_state_index;
-                cx = cpuidle_get_statedata(&dev->states_usage[new_state_idx]);
+                cx = cpuidle_get_statedata(&dev->states_usage[index]);
        }
        if (index > 0)
diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c
index 997033129d26..bbb870c04a5e 100644
--- a/arch/arm/mach-omap2/gpmc-smsc911x.c
+++ b/arch/arm/mach-omap2/gpmc-smsc911x.c
@@ -19,6 +19,8 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/smsc911x.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
 #include <plat/board.h>
 #include <plat/gpmc.h>
@@ -42,6 +44,50 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = {
        .flags          = SMSC911X_USE_16BIT,
 };
+static struct regulator_consumer_supply gpmc_smsc911x_supply[] = {
+        REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+        REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+/* Generic regulator definition to satisfy smsc911x */
+static struct regulator_init_data gpmc_smsc911x_reg_init_data = {
+        .constraints = {
+                .min_uV                 = 3300000,
+                .max_uV                 = 3300000,
+                .valid_modes_mask       = REGULATOR_MODE_NORMAL
+                                        | REGULATOR_MODE_STANDBY,
+                .valid_ops_mask         = REGULATOR_CHANGE_MODE
+                                        | REGULATOR_CHANGE_STATUS,
+        },
+        .num_consumer_supplies  = ARRAY_SIZE(gpmc_smsc911x_supply),
+        .consumer_supplies      = gpmc_smsc911x_supply,
+};
+static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = {
+        .supply_name            = "gpmc_smsc911x",
+        .microvolts             = 3300000,
+        .gpio                   = -EINVAL,
+        .startup_delay          = 0,
+        .enable_high            = 0,
+        .enabled_at_boot        = 1,
+        .init_data              = &gpmc_smsc911x_reg_init_data,
+};
+/*
+ * Platform device id of 42 is a temporary fix to avoid conflicts
+ * with other reg-fixed-voltage devices. The real fix should
+ * involve the driver core providing a way of dynamically
+ * assigning a unique id on registration for platform devices
+ * in the same name space.
+ */
+static struct platform_device gpmc_smsc911x_regulator = {
+        .name           = "reg-fixed-voltage",
+        .id             = 42,
+        .dev = {
+                .platform_data  = &gpmc_smsc911x_fixed_reg_data,
+        },
+};
 /*
 * Initialize smsc911x device connected to the GPMC. Note that we
 * assume that pin multiplexing is done in the board-*.c file,
@@ -55,6 +101,12 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
        gpmc_cfg = board_data;
+        ret = platform_device_register(&gpmc_smsc911x_regulator);
+        if (ret < 0) {
+                pr_err("Unable to register smsc911x regulators: %d\n", ret);
+                return;
+        }
        if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
                pr_err("Failed to request GPMC mem region\n");
                return;
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index b40c28895298..19dd1657245c 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -428,6 +428,7 @@ static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
        return 0;
 }
+static int omap_hsmmc_done;
 #define MAX_OMAP_MMC_HWMOD_NAME_LEN             16
 void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
@@ -491,6 +492,11 @@ void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
 {
        u32 reg;
+        if (omap_hsmmc_done)
+                return;
+        omap_hsmmc_done = 1;
        if (!cpu_is_omap44xx()) {
                if (cpu_is_omap2430()) {
                        control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 6c5826605eae..719ee423abe2 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -343,6 +343,7 @@ static void __init omap3_check_revision(const char **cpu_rev)
        case 0xb944:
                omap_revision = AM335X_REV_ES1_0;
                *cpu_rev = "1.0";
+                break;
        case 0xb8f2:
                switch (rev) {
                case 0:
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index eb50c29fb644..fb11b44fbdec 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -307,6 +307,7 @@ void __init omapam33xx_map_common_io(void)
 void __init omap44xx_map_common_io(void)
 {
        iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
+        omap_barriers_init();
 }
 #endif
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index a6db1e4f7b6e..415a6f1cf419 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -281,8 +281,16 @@ static struct omap_mbox mbox_iva_info = {
        .ops    = &omap2_mbox_ops,
        .priv   = &omap2_mbox_iva_priv,
 };
+#endif
-struct omap_mbox *omap2_mboxes[] = { &mbox_dsp_info, &mbox_iva_info, NULL };
+#ifdef CONFIG_ARCH_OMAP2
+struct omap_mbox *omap2_mboxes[] = {
+        &mbox_dsp_info,
+#ifdef CONFIG_SOC_OMAP2420
+        &mbox_iva_info,
+#endif
+        NULL
+};
 #endif
 #if defined(CONFIG_ARCH_OMAP4)
@@ -412,8 +420,7 @@ static void __exit omap2_mbox_exit(void)
        platform_driver_unregister(&omap2_mbox_driver);
 }
-/* must be ready before omap3isp is probed */
+module_init(omap2_mbox_init);
-subsys_initcall(omap2_mbox_init);
 module_exit(omap2_mbox_exit);
 MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index fb8bc9fa43b1..611a0e3d54ca 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -218,7 +218,7 @@ static int _omap_mux_get_by_name(struct omap_mux_partition *partition,
        return -ENODEV;
 }
-static int __init
+static int
 omap_mux_get_by_name(const char *muxname,
                        struct omap_mux_partition **found_partition,
                        struct omap_mux **found_mux)
diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
index b8822048e409..ac49384d0285 100644
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ b/arch/arm/mach-omap2/omap-iommu.c
@@ -150,7 +150,8 @@ err_out:
                platform_device_put(omap_iommu_pdev[i]);
        return err;
 }
-module_init(omap_iommu_init);
+/* must be ready before omap3isp is probed */
+subsys_initcall(omap_iommu_init);
 static void __exit omap_iommu_exit(void)
 {
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 40a8fbc07e4b..70de277f5c15 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -24,12 +24,14 @@
 #include <plat/irqs.h>
 #include <plat/sram.h>
+#include <plat/omap-secure.h>
 #include <mach/hardware.h>
 #include <mach/omap-wakeupgen.h>
 #include "common.h"
 #include "omap4-sar-layout.h"
+#include <linux/export.h>
 #ifdef CONFIG_CACHE_L2X0
 static void __iomem *l2cache_base;
@@ -43,6 +45,9 @@ static void __iomem *sar_ram_base;
 void __iomem *dram_sync, *sram_sync;
+static phys_addr_t paddr;
+static u32 size;
 void omap_bus_sync(void)
 {
        if (dram_sync && sram_sync) {
@@ -51,19 +56,22 @@ void omap_bus_sync(void)
                isb();
        }
 }
+EXPORT_SYMBOL(omap_bus_sync);
-static int __init omap_barriers_init(void)
+/* Steal one page physical memory for barrier implementation */
+int __init omap_barrier_reserve_memblock(void)
 {
-        struct map_desc dram_io_desc[1];
-        phys_addr_t paddr;
-        u32 size;
-        if (!cpu_is_omap44xx())
-                return -ENODEV;
        size = ALIGN(PAGE_SIZE, SZ_1M);
        paddr = arm_memblock_steal(size, SZ_1M);
+        return 0;
+}
+void __init omap_barriers_init(void)
+{
+        struct map_desc dram_io_desc[1];
        dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA;
        dram_io_desc[0].pfn = __phys_to_pfn(paddr);
        dram_io_desc[0].length = size;
@@ -75,9 +83,10 @@ static int __init omap_barriers_init(void)
        pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n",
                (long long) paddr, dram_io_desc[0].virtual);
-        return 0;
 }
-core_initcall(omap_barriers_init);
+#else
+void __init omap_barriers_init(void)
+{}
 #endif
 void __init gic_init_irq(void)
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 1881fe915149..5a65dd04aa38 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -174,14 +174,17 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
        freq = clk->rate;
        clk_put(clk);
+        rcu_read_lock();
        opp = opp_find_freq_ceil(dev, &freq);
        if (IS_ERR(opp)) {
+                rcu_read_unlock();
                pr_err("%s: unable to find boot up OPP for vdd_%s\n",
                        __func__, vdd_name);
                goto exit;
        }
        bootup_volt = opp_get_voltage(opp);
+        rcu_read_unlock();
        if (!bootup_volt) {
                pr_err("%s: unable to find voltage corresponding "
                        "to the bootup OPP for vdd_%s\n", __func__, vdd_name);
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 10b20c652e5d..4b57757bf9d1 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -270,7 +270,6 @@ static struct regulator_init_data omap4_vusb_idata = {
        .constraints = {
                .min_uV                 = 3300000,
                .max_uV                 = 3300000,
-                .apply_uV               = true,
                .valid_modes_mask       = REGULATOR_MODE_NORMAL
                                        | REGULATOR_MODE_STANDBY,
                .valid_ops_mask         = REGULATOR_CHANGE_MODE
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index 771dc781b746..f51348dafafd 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -486,7 +486,7 @@ static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 {
        struct omap_hwmod       *oh[2];
-        struct omap_device      *od;
+        struct platform_device  *pdev;
        int                     bus_id = -1;
        int                     i;
@@ -522,11 +522,11 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
                return;
        }
-        od = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
+        pdev = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
                                (void *)&usbhs_data, sizeof(usbhs_data),
                                omap_uhhtll_latency,
                                ARRAY_SIZE(omap_uhhtll_latency), false);
-        if (IS_ERR(od)) {
+        if (IS_ERR(pdev)) {
                pr_err("Could not build hwmod devices %s,%s\n",
                        USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME);
                return;
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 0d729e6619df..42d5cca66257 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -49,7 +49,6 @@ extern unsigned pxa3xx_get_clk_frequency_khz(int);
 #endif
 extern struct syscore_ops pxa_irq_syscore_ops;
-extern struct syscore_ops pxa_gpio_syscore_ops;
 extern struct syscore_ops pxa2xx_mfp_syscore_ops;
 extern struct syscore_ops pxa3xx_mfp_syscore_ops;
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index fb9b62dcf4ca..208eef1c0485 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -45,6 +45,7 @@
 #include <mach/hx4700.h>
 #include <mach/irda.h>
+#include <sound/ak4641.h>
 #include <video/platform_lcd.h>
 #include <video/w100fb.h>
@@ -765,6 +766,28 @@ static struct i2c_board_info __initdata pi2c_board_info[] = {
 };
 /*
+ * Asahi Kasei AK4641 on I2C
+ */
+static struct ak4641_platform_data ak4641_info = {
+        .gpio_power = GPIO27_HX4700_CODEC_ON,
+        .gpio_npdn  = GPIO109_HX4700_CODEC_nPDN,
+};
+static struct i2c_board_info i2c_board_info[] __initdata = {
+        {
+                I2C_BOARD_INFO("ak4641", 0x12),
+                .platform_data = &ak4641_info,
+        },
+};
+static struct platform_device audio = {
+        .name   = "hx4700-audio",
+        .id     = -1,
+};
+/*
 * PCMCIA
 */
@@ -790,6 +813,7 @@ static struct platform_device *devices[] __initdata = {
        &gpio_vbus,
        &power_supply,
        &strataflash,
+        &audio,
        &pcmcia,
 };
@@ -827,6 +851,7 @@ static void __init hx4700_init(void)
        pxa_set_ficp_info(&ficp_info);
        pxa27x_set_i2c_power_info(NULL);
        pxa_set_i2c_info(NULL);
+        i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info));
        i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info));
        pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
        spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index f14775536b83..29b62afc6f7c 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -226,6 +226,12 @@ static void __init pxa25x_mfp_init(void)
 {
        int i;
+        /* running before pxa_gpio_probe() */
+#ifdef CONFIG_CPU_PXA26x
+        pxa_last_gpio = 89;
+#else
+        pxa_last_gpio = 84;
+#endif
        for (i = 0; i <= pxa_last_gpio; i++)
                gpio_desc[i].valid = 1;
@@ -295,6 +301,7 @@ static void __init pxa27x_mfp_init(void)
 {
        int i, gpio;
+        pxa_last_gpio = 120;    /* running before pxa_gpio_probe() */
        for (i = 0; i <= pxa_last_gpio; i++) {
                /* skip GPIO2, 5, 6, 7, 8, they are not
                 * valid pins allow configuration
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 91e4f6c03766..3352b37b60cf 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -25,7 +25,6 @@
 #include <linux/suspend.h>
 #include <linux/syscore_ops.h>
 #include <linux/irq.h>
-#include <linux/gpio.h>
 #include <asm/mach/map.h>
 #include <asm/suspend.h>
@@ -209,6 +208,7 @@ static struct clk_lookup pxa25x_clkregs[] = {
        INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
        INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
        INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
+        INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
 };
 static struct clk_lookup pxa25x_hwuart_clkreg =
@@ -368,7 +368,6 @@ static int __init pxa25x_init(void)
                register_syscore_ops(&pxa_irq_syscore_ops);
                register_syscore_ops(&pxa2xx_mfp_syscore_ops);
-                register_syscore_ops(&pxa_gpio_syscore_ops);
                register_syscore_ops(&pxa2xx_clock_syscore_ops);
                ret = platform_add_devices(pxa25x_devices,
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index aed6cbcf3866..6bce78edce7a 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -22,7 +22,6 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/i2c/pxa-i2c.h>
-#include <linux/gpio.h>
 #include <asm/mach/map.h>
 #include <mach/hardware.h>
@@ -230,6 +229,7 @@ static struct clk_lookup pxa27x_clkregs[] = {
        INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
        INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
        INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
+        INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
 };
 #ifdef CONFIG_PM
@@ -456,7 +456,6 @@ static int __init pxa27x_init(void)
                register_syscore_ops(&pxa_irq_syscore_ops);
                register_syscore_ops(&pxa2xx_mfp_syscore_ops);
-                register_syscore_ops(&pxa_gpio_syscore_ops);
                register_syscore_ops(&pxa2xx_clock_syscore_ops);
                ret = platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 4f402afa6609..3918a672238e 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -462,7 +462,6 @@ static int __init pxa3xx_init(void)
                register_syscore_ops(&pxa_irq_syscore_ops);
                register_syscore_ops(&pxa3xx_mfp_syscore_ops);
-                register_syscore_ops(&pxa_gpio_syscore_ops);
                register_syscore_ops(&pxa3xx_clock_syscore_ops);
                ret = platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c
index d082a583df78..5ce434b95e87 100644
--- a/arch/arm/mach-pxa/pxa95x.c
+++ b/arch/arm/mach-pxa/pxa95x.c
@@ -283,7 +283,6 @@ static int __init pxa95x_init(void)
                        return ret;
                register_syscore_ops(&pxa_irq_syscore_ops);
-                register_syscore_ops(&pxa_gpio_syscore_ops);
                register_syscore_ops(&pxa3xx_clock_syscore_ops);
                ret = platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
index febc809ed5a6..5aded5e6148f 100644
--- a/arch/arm/mach-pxa/saarb.c
+++ b/arch/arm/mach-pxa/saarb.c
@@ -15,7 +15,6 @@
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
 #include <linux/mfd/88pm860x.h>
-#include <linux/gpio.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 8d5168d253a9..30989baf7f2a 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -168,6 +168,7 @@ struct battery_thresh sharpsl_battery_levels_noac[] = {
 #define MAXCTRL_SEL_SH   4
 #define MAXCTRL_STR      (1u << 7)
+extern int max1111_read_channel(int);
 /*
 * Read MAX1111 ADC
 */
@@ -177,8 +178,6 @@ int sharpsl_pm_pxa_read_max1111(int channel)
        if (machine_is_tosa())
            return 0;
-        extern int max1111_read_channel(int);
        /* max1111 accepts channels from 0-3, however,
         * it is encoded from 0-7 here in the code.
         */
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 34cbdac51525..438f02fe122a 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -172,10 +172,9 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm)
 static unsigned long spitz_charger_wakeup(void)
 {
        unsigned long ret;
-        ret = (!gpio_get_value(SPITZ_GPIO_KEY_INT)
+        ret = ((!gpio_get_value(SPITZ_GPIO_KEY_INT)
                << GPIO_bit(SPITZ_GPIO_KEY_INT))
-                | (!gpio_get_value(SPITZ_GPIO_SYNC)
+                | gpio_get_value(SPITZ_GPIO_SYNC));
-                << GPIO_bit(SPITZ_GPIO_SYNC));
        return ret;
 }
diff --git a/arch/arm/mach-s3c2440/common.h b/arch/arm/mach-s3c2440/common.h
index db8a98ac68c5..0c1eb1dfc534 100644
--- a/arch/arm/mach-s3c2440/common.h
+++ b/arch/arm/mach-s3c2440/common.h
@@ -12,6 +12,6 @@
 #ifndef __ARCH_ARM_MACH_S3C2440_COMMON_H
 #define __ARCH_ARM_MACH_S3C2440_COMMON_H
-void s3c2440_restart(char mode, const char *cmd);
+void s3c244x_restart(char mode, const char *cmd);
 #endif /* __ARCH_ARM_MACH_S3C2440_COMMON_H */
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 24569550de1a..19b577bc09b8 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -487,5 +487,5 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
        .init_machine   = anubis_init,
        .init_irq       = s3c24xx_init_irq,
        .timer          = &s3c24xx_timer,
-        .restart        = s3c2440_restart,
+        .restart        = s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index d6a9763110cd..d7ae49c90118 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -222,5 +222,5 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
        .init_machine   = at2440evb_init,
        .init_irq       = s3c24xx_init_irq,
        .timer          = &s3c24xx_timer,
-        .restart        = s3c2440_restart,
+        .restart        = s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index 5859e609d28c..9a4a5bc008e6 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -601,5 +601,5 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
        .init_irq       = s3c24xx_init_irq,
        .init_machine   = gta02_machine_init,
        .timer          = &s3c24xx_timer,
-        .restart        = s3c2440_restart,
+        .restart        = s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index adbbb85bc4cd..5d66fb218a41 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -701,5 +701,5 @@ MACHINE_START(MINI2440, "MINI2440")
        .init_machine   = mini2440_init,
        .init_irq       = s3c24xx_init_irq,
        .timer          = &s3c24xx_timer,
-        .restart        = s3c2440_restart,
+        .restart        = s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 40eaf844bc1f..5198e3e1c5be 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -158,5 +158,5 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
        .init_machine   = nexcoder_init,
        .init_irq       = s3c24xx_init_irq,
        .timer          = &s3c24xx_timer,
-        .restart        = s3c2440_restart,
+        .restart        = s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 4c480ef734f6..c5daeb612a88 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -436,5 +436,5 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
        .init_irq       = s3c24xx_init_irq,
        .init_machine   = osiris_init,
        .timer          = &s3c24xx_timer,
-        .restart        = s3c2440_restart,
+        .restart        = s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
index 80077f6472ee..6f68abf44fab 100644
--- a/arch/arm/mach-s3c2440/mach-rx1950.c
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -822,5 +822,5 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
        .init_irq = s3c24xx_init_irq,
        .init_machine = rx1950_init_machine,
        .timer = &s3c24xx_timer,
-        .restart        = s3c2440_restart,
+        .restart        = s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index 20103bafbd4b..56af35447598 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -213,5 +213,5 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
        .init_irq       = rx3715_init_irq,
        .init_machine   = rx3715_init_machine,
        .timer          = &s3c24xx_timer,
-        .restart        = s3c2440_restart,
+        .restart        = s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index 1deb60d12a60..83a1036d7dcb 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -183,5 +183,5 @@ MACHINE_START(S3C2440, "SMDK2440")
        .map_io         = smdk2440_map_io,
        .init_machine   = smdk2440_machine_init,
        .timer          = &s3c24xx_timer,
-        .restart        = s3c2440_restart,
+        .restart        = s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index 517623a09fc5..2b3dddb49af7 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -35,7 +35,6 @@
 #include <plat/cpu.h>
 #include <plat/s3c244x.h>
 #include <plat/pm.h>
-#include <plat/watchdog-reset.h>
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
@@ -74,15 +73,3 @@ void __init s3c2440_map_io(void)
        s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
        s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
 }
-void s3c2440_restart(char mode, const char *cmd)
-{
-        if (mode == 's') {
-                soft_restart(0);
-        }
-        arch_wdt_reset();
-        /* we'll take a jump through zero as a poor second */
-        soft_restart(0);
-}
diff --git a/arch/arm/mach-s3c2440/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c
index 36bc60f61d0a..d15852f642b7 100644
--- a/arch/arm/mach-s3c2440/s3c244x.c
+++ b/arch/arm/mach-s3c2440/s3c244x.c
@@ -46,6 +46,7 @@
 #include <plat/pm.h>
 #include <plat/pll.h>
 #include <plat/nand-core.h>
+#include <plat/watchdog-reset.h>
 static struct map_desc s3c244x_iodesc[] __initdata = {
        IODESC_ENT(CLKPWR),
@@ -196,3 +197,14 @@ struct syscore_ops s3c244x_pm_syscore_ops = {
        .suspend        = s3c244x_suspend,
        .resume         = s3c244x_resume,
 };
+void s3c244x_restart(char mode, const char *cmd)
+{
+        if (mode == 's')
+                soft_restart(0);
+        arch_wdt_reset();
+        /* we'll take a jump through zero as a poor second */
+        soft_restart(0);
+}
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 52af00446a63..c59e8b892d6b 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -5,7 +5,7 @@ config UX500_SOC_COMMON
        default y
        select ARM_GIC
        select HAS_MTU
-        select ARM_ERRATA_753970
+        select PL310_ERRATA_753970
        select ARM_ERRATA_754322
        select ARM_ERRATA_764369
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 9b3d0fbaee72..88c3ba151e87 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -7,7 +7,7 @@ config ARCH_VEXPRESS_CA9X4
        select ARM_GIC
        select ARM_ERRATA_720789
        select ARM_ERRATA_751472
-        select ARM_ERRATA_753970
+        select PL310_ERRATA_753970
        select HAVE_SMP
        select MIGHT_HAVE_CACHE_L2X0
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 0404ccbb8aa3..f1c8486f7501 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -230,9 +230,7 @@ __v7_setup:
        mcreq   p15, 0, r10, c15, c0, 1         @ write diagnostic register
 #endif
 #ifdef CONFIG_ARM_ERRATA_743622
-        teq     r6, #0x20                       @ present in r2p0
+        teq     r5, #0x00200000                 @ only present in r2p*
-        teqne   r6, #0x21                       @ present in r2p1
-        teqne   r6, #0x22                       @ present in r2p2
        mrceq   p15, 0, r10, c15, c0, 1         @ read diagnostic register
        orreq   r10, r10, #1 << 6               @ set bit #6
        mcreq   p15, 0, r10, c15, c0, 1         @ write diagnostic register
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 06383b51e655..4de7d1e79e73 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -69,6 +69,7 @@ void __init omap_reserve(void)
        omap_vram_reserve_sdram_memblock();
        omap_dsp_reserve_sdram_memblock();
        omap_secure_ram_reserve_memblock();
+        omap_barrier_reserve_memblock();
 }
 void __init omap_init_consistent_dma_size(void)
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index 2efd6454bce0..37bbbbb981b2 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -428,8 +428,16 @@
 #define OMAP_GPMC_NR_IRQS       8
 #define OMAP_GPMC_IRQ_END       (OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS)
+/* PRCM IRQ handler */
+#ifdef CONFIG_ARCH_OMAP2PLUS
+#define OMAP_PRCM_IRQ_BASE      (OMAP_GPMC_IRQ_END)
+#define OMAP_PRCM_NR_IRQS       64
+#define OMAP_PRCM_IRQ_END       (OMAP_PRCM_IRQ_BASE + OMAP_PRCM_NR_IRQS)
+#else
+#define OMAP_PRCM_IRQ_END       OMAP_GPMC_IRQ_END
+#endif
-#define NR_IRQS                 OMAP_GPMC_IRQ_END
+#define NR_IRQS                 OMAP_PRCM_IRQ_END
 #define OMAP_IRQ_BIT(irq)       (1 << ((irq) % 32))
diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h
index 3047ff923a63..8c7994ce9869 100644
--- a/arch/arm/plat-omap/include/plat/omap-secure.h
+++ b/arch/arm/plat-omap/include/plat/omap-secure.h
@@ -10,4 +10,10 @@ static inline void omap_secure_ram_reserve_memblock(void)
 { }
 #endif
+#ifdef CONFIG_OMAP4_ERRATA_I688
+extern int omap_barrier_reserve_memblock(void);
+#else
+static inline void omap_barrier_reserve_memblock(void)
+{ }
+#endif
 #endif /* __OMAP_SECURE_H__ */
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 9fe35348e03b..2bab4c99a234 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -1249,7 +1249,7 @@ static void s3c2410_dma_resume(void)
        struct s3c2410_dma_chan *cp = s3c2410_chans + dma_channels - 1;
        int channel;
-        for (channel = dma_channels - 1; channel >= 0; cp++, channel--)
+        for (channel = dma_channels - 1; channel >= 0; cp--, channel--)
                s3c2410_dma_resume_chan(cp);
 }
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index f10768e988d4..d21d744e4d99 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -1409,7 +1409,7 @@ void __init s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd)
 #ifdef CONFIG_S3C_DEV_USB_HSOTG
 static struct resource s3c_usb_hsotg_resources[] = {
-        [0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_16K),
+        [0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_128K),
        [1] = DEFINE_RES_IRQ(IRQ_OTG),
 };
diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c
index 0c77e4298675..abb5bdecd509 100644
--- a/arch/arm/plat-spear/time.c
+++ b/arch/arm/plat-spear/time.c
@@ -145,11 +145,13 @@ static void clockevent_set_mode(enum clock_event_mode mode,
 static int clockevent_next_event(unsigned long cycles,
                                 struct clock_event_device *clk_event_dev)
 {
-        u16 val;
+        u16 val = readw(gpt_base + CR(CLKEVT));
+        if (val & CTRL_ENABLE)
+                writew(val & ~CTRL_ENABLE, gpt_base + CR(CLKEVT));
        writew(cycles, gpt_base + LOAD(CLKEVT));
-        val = readw(gpt_base + CR(CLKEVT));
        val |= CTRL_ENABLE | CTRL_INT_ENABLE;
        writew(val, gpt_base + CR(CLKEVT));