7 files changed, 231 insertions, 16 deletions

diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index fcb587f825cc..cac83a694880 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -18,12 +18,14 @@
 #include <linux/amba/pl022.h>
 #include <linux/spi/spi.h>
 #include <linux/mfd/ab8500.h>
+#include <linux/input/matrix_keypad.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #include <plat/pincfg.h>
 #include <plat/i2c.h>
+#include <plat/ske.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
@@ -49,6 +51,24 @@ static pin_cfg_t mop500_pins[] = {
         GPIO11_I2C2_SCL,
         GPIO229_I2C3_SDA,
         GPIO230_I2C3_SCL,
+
+        /* SKE keypad */
+        GPIO153_KP_I7,
+        GPIO154_KP_I6,
+        GPIO155_KP_I5,
+        GPIO156_KP_I4,
+        GPIO157_KP_O7,
+        GPIO158_KP_O6,
+        GPIO159_KP_O5,
+        GPIO160_KP_O4,
+        GPIO161_KP_I3,
+        GPIO162_KP_I2,
+        GPIO163_KP_I1,
+        GPIO164_KP_I0,
+        GPIO165_KP_O3,
+        GPIO166_KP_O2,
+        GPIO167_KP_O1,
+        GPIO168_KP_O0,
 };
 
 static void ab4500_spi_cs_control(u32 command)
@@ -148,12 +168,120 @@ static struct amba_device *amba_devs[] __initdata = {
         &u8500_ssp0_device,
 };
 
+static const unsigned int ux500_keymap[] = {
+        KEY(2, 5, KEY_END),
+        KEY(4, 1, KEY_POWER),
+        KEY(3, 5, KEY_VOLUMEDOWN),
+        KEY(1, 3, KEY_3),
+        KEY(5, 2, KEY_RIGHT),
+        KEY(5, 0, KEY_9),
+
+        KEY(0, 5, KEY_MENU),
+        KEY(7, 6, KEY_ENTER),
+        KEY(4, 5, KEY_0),
+        KEY(6, 7, KEY_2),
+        KEY(3, 4, KEY_UP),
+        KEY(3, 3, KEY_DOWN),
+
+        KEY(6, 4, KEY_SEND),
+        KEY(6, 2, KEY_BACK),
+        KEY(4, 2, KEY_VOLUMEUP),
+        KEY(5, 5, KEY_1),
+        KEY(4, 3, KEY_LEFT),
+        KEY(3, 2, KEY_7),
+};
+
+static const struct matrix_keymap_data ux500_keymap_data = {
+        .keymap         = ux500_keymap,
+        .keymap_size    = ARRAY_SIZE(ux500_keymap),
+};
+
+/*
+ * Nomadik SKE keypad
+ */
+#define ROW_PIN_I0      164
+#define ROW_PIN_I1      163
+#define ROW_PIN_I2      162
+#define ROW_PIN_I3      161
+#define ROW_PIN_I4      156
+#define ROW_PIN_I5      155
+#define ROW_PIN_I6      154
+#define ROW_PIN_I7      153
+#define COL_PIN_O0      168
+#define COL_PIN_O1      167
+#define COL_PIN_O2      166
+#define COL_PIN_O3      165
+#define COL_PIN_O4      160
+#define COL_PIN_O5      159
+#define COL_PIN_O6      158
+#define COL_PIN_O7      157
+
+#define SKE_KPD_MAX_ROWS        8
+#define SKE_KPD_MAX_COLS        8
+
+static int ske_kp_rows[] = {
+        ROW_PIN_I0, ROW_PIN_I1, ROW_PIN_I2, ROW_PIN_I3,
+        ROW_PIN_I4, ROW_PIN_I5, ROW_PIN_I6, ROW_PIN_I7,
+};
+
+/*
+ * ske_set_gpio_row: request and set gpio rows
+ */
+static int ske_set_gpio_row(int gpio)
+{
+        int ret;
+
+        ret = gpio_request(gpio, "ske-kp");
+        if (ret < 0) {
+                pr_err("ske_set_gpio_row: gpio request failed\n");
+                return ret;
+        }
+
+        ret = gpio_direction_output(gpio, 1);
+        if (ret < 0) {
+                pr_err("ske_set_gpio_row: gpio direction failed\n");
+                gpio_free(gpio);
+        }
+
+        return ret;
+}
+
+/*
+ * ske_kp_init - enable the gpio configuration
+ */
+static int ske_kp_init(void)
+{
+        int ret, i;
+
+        for (i = 0; i < SKE_KPD_MAX_ROWS; i++) {
+                ret = ske_set_gpio_row(ske_kp_rows[i]);
+                if (ret < 0) {
+                        pr_err("ske_kp_init: failed init\n");
+                        return ret;
+                }
+        }
+
+        return 0;
+}
+
+static struct ske_keypad_platform_data ske_keypad_board = {
+        .init           = ske_kp_init,
+        .keymap_data    = &ux500_keymap_data,
+        .no_autorepeat  = true,
+        .krow           = SKE_KPD_MAX_ROWS,     /* 8x8 matrix */
+        .kcol           = SKE_KPD_MAX_COLS,
+        .debounce_ms    = 40,                   /* in millsecs */
+};
+
+
+
 /* add any platform devices here - TODO */
 static struct platform_device *platform_devs[] __initdata = {
         &u8500_i2c0_device,
         &ux500_i2c1_device,
         &ux500_i2c2_device,
         &ux500_i2c3_device,
+        &ux500_ske_keypad_device,
 };
 
 static void __init u8500_init_machine(void)
@@ -168,6 +296,7 @@ static void __init u8500_init_machine(void)
         ux500_i2c1_device.dev.platform_data = &u8500_i2c1_data;
         ux500_i2c2_device.dev.platform_data = &u8500_i2c2_data;
         ux500_i2c3_device.dev.platform_data = &u8500_i2c3_data;
+        ux500_ske_keypad_device.dev.platform_data = &ske_keypad_board;
 
         u8500_ssp0_device.dev.platform_data = &ssp0_platform_data;
 
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index d8ab7f184fe4..1675047daf20 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -477,6 +477,7 @@ static struct clk_lookup u8500_common_clks[] = {
         CLK(sdi5,       "sdi5",         NULL),
         CLK(uart2,      "uart2",        NULL),
         CLK(ske,        "ske",          NULL),
+        CLK(ske,        "nmk-ske-keypad",       NULL),
         CLK(sdi2,       "sdi2",         NULL),
         CLK(i2c0,       "nmk-i2c.0",    NULL),
         CLK(fsmc,       "fsmc",         NULL),
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 40032fecbc16..cbbe69a76a7c 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -292,3 +292,23 @@ void dma40_u8500ed_fixup(void)
         dma40_resources[1].start = U8500_DMA_LCPA_BASE_ED;
         dma40_resources[1].end = U8500_DMA_LCPA_BASE_ED + 2 * SZ_1K - 1;
 }
+
+struct resource keypad_resources[] = {
+        [0] = {
+                .start = U8500_SKE_BASE,
+                .end = U8500_SKE_BASE + SZ_4K - 1,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start = IRQ_DB8500_KB,
+                .end = IRQ_DB8500_KB,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device ux500_ske_keypad_device = {
+        .name = "nmk-ske-keypad",
+        .id = -1,
+        .num_resources = ARRAY_SIZE(keypad_resources),
+        .resource = keypad_resources,
+};
diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h
index 33a120c2e82e..b91a4d1211a2 100644
--- a/arch/arm/mach-ux500/include/mach/devices.h
+++ b/arch/arm/mach-ux500/include/mach/devices.h
@@ -26,6 +26,7 @@ extern struct platform_device ux500_i2c3_device;
 extern struct platform_device u8500_i2c0_device;
 extern struct platform_device u8500_i2c4_device;
 extern struct platform_device u8500_dma40_device;
+extern struct platform_device ux500_ske_keypad_device;
 
 extern struct amba_device u8500_sdi0_device;
 extern struct amba_device u8500_sdi1_device;
diff --git a/arch/arm/mach-ux500/pins-db8500.h b/arch/arm/mach-ux500/pins-db8500.h
index 66f8761cc823..f923764ee16c 100644
--- a/arch/arm/mach-ux500/pins-db8500.h
+++ b/arch/arm/mach-ux500/pins-db8500.h
@@ -459,82 +459,82 @@
 #define GPIO152_KP_O9           PIN_CFG(152, ALT_C)
 
 #define GPIO153_GPIO            PIN_CFG(153, GPIO)
-#define GPIO153_KP_I7           PIN_CFG(153, ALT_A)
+#define GPIO153_KP_I7           PIN_CFG_PULL(153, ALT_A, DOWN)
 #define GPIO153_LCD_D24         PIN_CFG(153, ALT_B)
 #define GPIO153_U2_RXD          PIN_CFG(153, ALT_C)
 
 #define GPIO154_GPIO            PIN_CFG(154, GPIO)
-#define GPIO154_KP_I6           PIN_CFG(154, ALT_A)
+#define GPIO154_KP_I6           PIN_CFG_PULL(154, ALT_A, DOWN)
 #define GPIO154_LCD_D25         PIN_CFG(154, ALT_B)
 #define GPIO154_U2_TXD          PIN_CFG(154, ALT_C)
 
 #define GPIO155_GPIO            PIN_CFG(155, GPIO)
-#define GPIO155_KP_I5           PIN_CFG(155, ALT_A)
+#define GPIO155_KP_I5           PIN_CFG_PULL(155, ALT_A, DOWN)
 #define GPIO155_LCD_D26         PIN_CFG(155, ALT_B)
 #define GPIO155_STMAPE_CLK      PIN_CFG(155, ALT_C)
 
 #define GPIO156_GPIO            PIN_CFG(156, GPIO)
-#define GPIO156_KP_I4           PIN_CFG(156, ALT_A)
+#define GPIO156_KP_I4           PIN_CFG_PULL(156, ALT_A, DOWN)
 #define GPIO156_LCD_D27         PIN_CFG(156, ALT_B)
 #define GPIO156_STMAPE_DAT3     PIN_CFG(156, ALT_C)
 
 #define GPIO157_GPIO            PIN_CFG(157, GPIO)
-#define GPIO157_KP_O7           PIN_CFG(157, ALT_A)
+#define GPIO157_KP_O7           PIN_CFG_PULL(157, ALT_A, UP)
 #define GPIO157_LCD_D28         PIN_CFG(157, ALT_B)
 #define GPIO157_STMAPE_DAT2     PIN_CFG(157, ALT_C)
 
 #define GPIO158_GPIO            PIN_CFG(158, GPIO)
-#define GPIO158_KP_O6           PIN_CFG(158, ALT_A)
+#define GPIO158_KP_O6           PIN_CFG_PULL(158, ALT_A, UP)
 #define GPIO158_LCD_D29         PIN_CFG(158, ALT_B)
 #define GPIO158_STMAPE_DAT1     PIN_CFG(158, ALT_C)
 
 #define GPIO159_GPIO            PIN_CFG(159, GPIO)
-#define GPIO159_KP_O5           PIN_CFG(159, ALT_A)
+#define GPIO159_KP_O5           PIN_CFG_PULL(159, ALT_A, UP)
 #define GPIO159_LCD_D30         PIN_CFG(159, ALT_B)
 #define GPIO159_STMAPE_DAT0     PIN_CFG(159, ALT_C)
 
 #define GPIO160_GPIO            PIN_CFG(160, GPIO)
-#define GPIO160_KP_O4           PIN_CFG(160, ALT_A)
+#define GPIO160_KP_O4           PIN_CFG_PULL(160, ALT_A, UP)
 #define GPIO160_LCD_D31         PIN_CFG(160, ALT_B)
 #define GPIO160_NONE            PIN_CFG(160, ALT_C)
 
 #define GPIO161_GPIO            PIN_CFG(161, GPIO)
-#define GPIO161_KP_I3           PIN_CFG(161, ALT_A)
+#define GPIO161_KP_I3           PIN_CFG_PULL(161, ALT_A, DOWN)
 #define GPIO161_LCD_D32         PIN_CFG(161, ALT_B)
 #define GPIO161_UARTMOD_RXD     PIN_CFG(161, ALT_C)
 
 #define GPIO162_GPIO            PIN_CFG(162, GPIO)
-#define GPIO162_KP_I2           PIN_CFG(162, ALT_A)
+#define GPIO162_KP_I2           PIN_CFG_PULL(162, ALT_A, DOWN)
 #define GPIO162_LCD_D33         PIN_CFG(162, ALT_B)
 #define GPIO162_UARTMOD_TXD     PIN_CFG(162, ALT_C)
 
 #define GPIO163_GPIO            PIN_CFG(163, GPIO)
-#define GPIO163_KP_I1           PIN_CFG(163, ALT_A)
+#define GPIO163_KP_I1           PIN_CFG_PULL(163, ALT_A, DOWN)
 #define GPIO163_LCD_D34         PIN_CFG(163, ALT_B)
 #define GPIO163_STMMOD_CLK      PIN_CFG(163, ALT_C)
 
 #define GPIO164_GPIO            PIN_CFG(164, GPIO)
-#define GPIO164_KP_I0           PIN_CFG(164, ALT_A)
+#define GPIO164_KP_I0           PIN_CFG_PULL(164, ALT_A, UP)
 #define GPIO164_LCD_D35         PIN_CFG(164, ALT_B)
 #define GPIO164_STMMOD_DAT3     PIN_CFG(164, ALT_C)
 
 #define GPIO165_GPIO            PIN_CFG(165, GPIO)
-#define GPIO165_KP_O3           PIN_CFG(165, ALT_A)
+#define GPIO165_KP_O3           PIN_CFG_PULL(165, ALT_A, UP)
 #define GPIO165_LCD_D36         PIN_CFG(165, ALT_B)
 #define GPIO165_STMMOD_DAT2     PIN_CFG(165, ALT_C)
 
 #define GPIO166_GPIO            PIN_CFG(166, GPIO)
-#define GPIO166_KP_O2           PIN_CFG(166, ALT_A)
+#define GPIO166_KP_O2           PIN_CFG_PULL(166, ALT_A, UP)
 #define GPIO166_LCD_D37         PIN_CFG(166, ALT_B)
 #define GPIO166_STMMOD_DAT1     PIN_CFG(166, ALT_C)
 
 #define GPIO167_GPIO            PIN_CFG(167, GPIO)
-#define GPIO167_KP_O1           PIN_CFG(167, ALT_A)
+#define GPIO167_KP_O1           PIN_CFG_PULL(167, ALT_A, UP)
 #define GPIO167_LCD_D38         PIN_CFG(167, ALT_B)
 #define GPIO167_STMMOD_DAT0     PIN_CFG(167, ALT_C)
 
 #define GPIO168_GPIO            PIN_CFG(168, GPIO)
-#define GPIO168_KP_O0           PIN_CFG(168, ALT_A)
+#define GPIO168_KP_O0           PIN_CFG_PULL(168, ALT_A, UP)
 #define GPIO168_LCD_D39         PIN_CFG(168, ALT_B)
 #define GPIO168_NONE            PIN_CFG(168, ALT_C)
 
diff --git a/arch/arm/plat-nomadik/include/plat/ske.h b/arch/arm/plat-nomadik/include/plat/ske.h
new file mode 100644
index 000000000000..31382fbc07dc
--- /dev/null
+++ b/arch/arm/plat-nomadik/include/plat/ske.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com>
+ *
+ * ux500 Scroll key and Keypad Encoder (SKE) header
+ */
+
+#ifndef __SKE_H
+#define __SKE_H
+
+#include <linux/input/matrix_keypad.h>
+
+/* register definitions for SKE peripheral */
+#define SKE_CR          0x00
+#define SKE_VAL0        0x04
+#define SKE_VAL1        0x08
+#define SKE_DBCR        0x0C
+#define SKE_IMSC        0x10
+#define SKE_RIS         0x14
+#define SKE_MIS         0x18
+#define SKE_ICR         0x1C
+
+/*
+ * Keypad module
+ */
+
+/**
+ * struct keypad_platform_data - structure for platform specific data
+ * @init:       pointer to keypad init function
+ * @exit:       pointer to keypad deinitialisation function
+ * @keymap_data: matrix scan code table for keycodes
+ * @krow:       maximum number of rows
+ * @kcol:       maximum number of columns
+ * @debounce_ms: platform specific debounce time
+ * @no_autorepeat: flag for auto repetition
+ * @wakeup_enable: allow waking up the system
+ */
+struct ske_keypad_platform_data {
+        int (*init)(void);
+        int (*exit)(void);
+        const struct matrix_keymap_data *keymap_data;
+        u8 krow;
+        u8 kcol;
+        u8 debounce_ms;
+        bool no_autorepeat;
+        bool wakeup_enable;
+};
+#endif  /*__SKE_KPD_H*/
diff --git a/arch/arm/plat-omap/include/plat/omap4-keypad.h b/arch/arm/plat-omap/include/plat/omap4-keypad.h
new file mode 100644
index 000000000000..2b1d9bc1eebb
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap4-keypad.h
@@ -0,0 +1,14 @@
+#ifndef ARCH_ARM_PLAT_OMAP4_KEYPAD_H
+#define ARCH_ARM_PLAT_OMAP4_KEYPAD_H
+
+#include <linux/input/matrix_keypad.h>
+
+struct omap4_keypad_platform_data {
+        const struct matrix_keymap_data *keymap_data;
+
+        u8 rows;
+        u8 cols;
+};
+
+extern int omap4_keyboard_init(struct omap4_keypad_platform_data *);
+#endif