1 files changed, 71 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index f624dc85d441..02d23f15fd86 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -38,6 +38,57 @@
                 };
         };
 
+        /* HS USB Port 2 RESET */
+        hsusb2_reset: hsusb2_reset_reg {
+                compatible = "regulator-fixed";
+                regulator-name = "hsusb2_reset";
+                regulator-min-microvolt = <3300000>;
+                regulator-max-microvolt = <3300000>;
+                gpio = <&gpio5 19 0>;   /* gpio_147 */
+                startup-delay-us = <70000>;
+                enable-active-high;
+        };
+
+        /* HS USB Port 2 Power */
+        hsusb2_power: hsusb2_power_reg {
+                compatible = "regulator-fixed";
+                regulator-name = "hsusb2_vbus";
+                regulator-min-microvolt = <3300000>;
+                regulator-max-microvolt = <3300000>;
+                gpio = <&twl_gpio 18 0>;        /* GPIO LEDA */
+                startup-delay-us = <70000>;
+        };
+
+        /* HS USB Host PHY on PORT 2 */
+        hsusb2_phy: hsusb2_phy {
+                compatible = "usb-nop-xceiv";
+                reset-supply = <&hsusb2_reset>;
+                vcc-supply = <&hsusb2_power>;
+        };
+};
+
+&omap3_pmx_core {
+        pinctrl-names = "default";
+        pinctrl-0 = <
+                        &hsusbb2_pins
+        >;
+
+        hsusbb2_pins: pinmux_hsusbb2_pins {
+                pinctrl-single,pins = <
+                        0x5c0 0x3  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_clk OUTPUT */
+                        0x5c2 0x3  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_stp OUTPUT */
+                        0x5c4 0x10b  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dir INPUT | PULLDOWN */
+                        0x5c6 0x10b  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_nxt INPUT | PULLDOWN */
+                        0x5c8 0x10b  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat0 INPUT | PULLDOWN */
+                        0x5cA 0x10b  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat1 INPUT | PULLDOWN */
+                        0x1a4 0x10b  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat2 INPUT | PULLDOWN */
+                        0x1a6 0x10b  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat3 INPUT | PULLDOWN */
+                        0x1a8 0x10b  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat4 INPUT | PULLDOWN */
+                        0x1aa 0x10b  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat5 INPUT | PULLDOWN */
+                        0x1ac 0x10b  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat6 INPUT | PULLDOWN */
+                        0x1ae 0x10b  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat7 INPUT | PULLDOWN */
+                >;
+        };
 };
 
 &i2c1 {
@@ -65,3 +116,23 @@
 &mmc3 {
         status = "disabled";
 };
+
+&usbhshost {
+        port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+        phys = <0 &hsusb2_phy>;
+};
+
+&twl_gpio {
+        ti,use-leds;
+        /* pullups: BIT(1) */
+        ti,pullups = <0x000002>;
+        /*
+         * pulldowns:
+         * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
+         * BIT(15), BIT(16), BIT(17)
+         */
+        ti,pulldowns = <0x03a1c4>;
+};