166 files changed, 2660 insertions, 2686 deletions
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 64ba313724d2..ad81ece7f826 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -145,8 +145,8 @@ machine-$(CONFIG_ARCH_LOKI) 		:= loki
 machine-$(CONFIG_ARCH_MMP)              := mmp
 machine-$(CONFIG_ARCH_MSM)              := msm
 machine-$(CONFIG_ARCH_MV78XX0)          := mv78xx0
-machine-$(CONFIG_ARCH_MX1)              := mx1
+machine-$(CONFIG_ARCH_MX1)              := imx
-machine-$(CONFIG_ARCH_MX2)              := mx2
+machine-$(CONFIG_ARCH_MX2)              := imx
 machine-$(CONFIG_ARCH_MX25)             := mx25
 machine-$(CONFIG_ARCH_MX3)              := mx3
 machine-$(CONFIG_ARCH_MX5)              := mx5
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 9236475e7131..44cea2ddd22b 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,12 +1,14 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.34
-# Sat May 22 03:17:31 2010
+# Fri May 28 19:15:48 2010
 #
 CONFIG_ARM=y
 CONFIG_HAVE_PWM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_ARCH_USES_GETTIMEOFFSET=y
 CONFIG_HAVE_PROC_CPU=y
 CONFIG_NO_IOPORT=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -35,6 +37,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
 CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
@@ -186,9 +189,11 @@ CONFIG_MMU=y
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_BCMRING is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
 # CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
@@ -224,7 +229,7 @@ CONFIG_ARCH_S3C2410=y
 # CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_S5P6440 is not set
 # CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PC100 is not set
 # CONFIG_ARCH_S5PV210 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
@@ -233,6 +238,7 @@ CONFIG_ARCH_S3C2410=y
 # CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
 CONFIG_PLAT_SAMSUNG=y
 #
@@ -243,11 +249,18 @@ CONFIG_S3C_BOOT_ERROR_RESET=y
 CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
 CONFIG_S3C_LOWLEVEL_UART_PORT=0
 CONFIG_SAMSUNG_CLKSRC=y
+CONFIG_S3C_GPIO_CFG_S3C24XX=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_S3C_GPIO_PULL_UP=y
 CONFIG_SAMSUNG_GPIO_EXTRA=0
 CONFIG_S3C_GPIO_SPACE=0
 CONFIG_S3C_ADC=y
 CONFIG_S3C_DEV_HSMMC=y
+CONFIG_S3C_DEV_HSMMC1=y
+CONFIG_S3C_DEV_HWMON=y
+CONFIG_S3C_DEV_FB=y
 CONFIG_S3C_DEV_USB_HOST=y
+CONFIG_S3C_DEV_WDT=y
 CONFIG_S3C_DEV_NAND=y
 CONFIG_S3C_DMA=y
@@ -260,6 +273,7 @@ CONFIG_PLAT_S3C24XX=y
 CONFIG_CPU_LLSERIAL_S3C2410=y
 CONFIG_CPU_LLSERIAL_S3C2440=y
 CONFIG_S3C2410_CLOCK=y
+CONFIG_S3C2443_CLOCK=y
 CONFIG_S3C24XX_DCLK=y
 CONFIG_S3C24XX_PWM=y
 CONFIG_S3C24XX_GPIO_EXTRA=128
@@ -270,6 +284,7 @@ CONFIG_S3C2410_DMA=y
 # CONFIG_S3C2410_DMA_DEBUG is not set
 CONFIG_MACH_SMDK=y
 CONFIG_S3C24XX_SIMTEC_AUDIO=y
+CONFIG_S3C2410_SETUP_TS=y
 #
 # S3C2400 Machines
@@ -289,6 +304,7 @@ CONFIG_ARCH_H1940=y
 # CONFIG_H1940BT is not set
 CONFIG_PM_H1940=y
 CONFIG_MACH_N30=y
+CONFIG_MACH_N35=y
 CONFIG_ARCH_BAST=y
 CONFIG_MACH_OTOM=y
 CONFIG_MACH_AML_M5900=y
@@ -309,6 +325,13 @@ CONFIG_MACH_SMDK2413=y
 CONFIG_MACH_S3C2413=y
 CONFIG_MACH_SMDK2412=y
 CONFIG_MACH_VSTMS=y
+CONFIG_CPU_S3C2416=y
+CONFIG_S3C2416_DMA=y
+#
+# S3C2416 Machines
+#
+CONFIG_MACH_SMDK2416=y
 CONFIG_CPU_S3C2440=y
 CONFIG_CPU_S3C2442=y
 CONFIG_CPU_S3C244X=y
@@ -320,9 +343,9 @@ CONFIG_S3C2440_DMA=y
 # S3C2440 and S3C2442 Machines
 #
 CONFIG_MACH_ANUBIS=y
-# CONFIG_MACH_NEO1973_GTA02 is not set
+CONFIG_MACH_NEO1973_GTA02=y
 CONFIG_MACH_OSIRIS=y
-# CONFIG_MACH_OSIRIS_DVS is not set
+CONFIG_MACH_OSIRIS_DVS=m
 CONFIG_MACH_RX3715=y
 CONFIG_ARCH_S3C2440=y
 CONFIG_MACH_NEXCODER_2440=y
@@ -330,6 +353,7 @@ CONFIG_SMDK2440_CPU2440=y
 CONFIG_SMDK2440_CPU2442=y
 CONFIG_MACH_AT2440EVB=y
 CONFIG_MACH_MINI2440=y
+CONFIG_MACH_RX1950=y
 CONFIG_CPU_S3C2443=y
 CONFIG_S3C2443_DMA=y
@@ -410,6 +434,7 @@ CONFIG_ALIGNMENT_TRAP=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
+# CONFIG_CMDLINE_FORCE is not set
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
@@ -509,7 +534,9 @@ CONFIG_TCP_CONG_ILLINOIS=m
 # CONFIG_DEFAULT_BIC is not set
 CONFIG_DEFAULT_CUBIC=y
 # CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_HYBLA is not set
 # CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_VENO is not set
 # CONFIG_DEFAULT_WESTWOOD is not set
 # CONFIG_DEFAULT_RENO is not set
 CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -566,6 +593,16 @@ CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
 # CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+#
+# Xtables targets
+#
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 # CONFIG_NETFILTER_XT_TARGET_CT is not set
@@ -577,9 +614,14 @@ CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
 CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+# CONFIG_NETFILTER_XT_TARGET_TEE is not set
 # CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+#
+# Xtables matches
+#
 CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
@@ -598,6 +640,7 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
 CONFIG_NETFILTER_XT_MATCH_OWNER=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
@@ -605,7 +648,6 @@ CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -613,7 +655,6 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
 CONFIG_IP_VS=m
 # CONFIG_IP_VS_IPV6 is not set
 # CONFIG_IP_VS_DEBUG is not set
@@ -713,6 +754,7 @@ CONFIG_IP6_NF_RAW=m
 # CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+# CONFIG_L2TP is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
@@ -739,6 +781,7 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
+# CONFIG_BT_L2CAP_EXT_FEATURES is not set
 CONFIG_BT_SCO=m
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
@@ -775,6 +818,7 @@ CONFIG_CFG80211_WEXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
 CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
 CONFIG_MAC80211_RC_MINSTREL=y
 # CONFIG_MAC80211_RC_DEFAULT_PID is not set
 CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
@@ -785,6 +829,7 @@ CONFIG_MAC80211_LEDS=y
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
 #
 # Device Drivers
@@ -828,6 +873,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
 # CONFIG_MTD_OOPS is not set
 #
@@ -882,9 +928,12 @@ CONFIG_MTD_ROM=y
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_ECC=y
 # CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_SM_COMMON is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
 # CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_S3C2410=y
@@ -1149,6 +1198,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
 # CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_KEYBOARD_LM8323 is not set
 # CONFIG_KEYBOARD_MAX7359 is not set
@@ -1212,6 +1262,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_AD7879_SPI is not set
 # CONFIG_TOUCHSCREEN_AD7879 is not set
 # CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
 # CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_S3C2410 is not set
@@ -1248,6 +1299,7 @@ CONFIG_TOUCHSCREEN_USB_NEXIO=y
 # CONFIG_TOUCHSCREEN_TSC2007 is not set
 # CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
 CONFIG_INPUT_ATI_REMOTE=m
 CONFIG_INPUT_ATI_REMOTE2=m
 CONFIG_INPUT_KEYSPAN_REMOTE=m
@@ -1255,6 +1307,8 @@ CONFIG_INPUT_POWERMATE=m
 CONFIG_INPUT_YEALINK=m
 CONFIG_INPUT_CM109=m
 CONFIG_INPUT_UINPUT=m
+# CONFIG_INPUT_PCF50633_PMU is not set
+# CONFIG_INPUT_PCF8574 is not set
 CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
 #
@@ -1287,6 +1341,7 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_N_HDLC is not set
+# CONFIG_N_GSM is not set
 # CONFIG_RISCOM8 is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_STALDRV is not set
@@ -1324,6 +1379,8 @@ CONFIG_SERIAL_S3C2440=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -1439,7 +1496,16 @@ CONFIG_GPIOLIB=y
 # AC97 GPIO expanders:
 #
 # CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_APM_POWER is not set
+# CONFIG_TEST_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_CHARGER_PCF50633 is not set
 CONFIG_HWMON=y
 CONFIG_HWMON_VID=m
 # CONFIG_HWMON_DEBUG_CHIP is not set
@@ -1499,6 +1565,7 @@ CONFIG_SENSORS_LM85=m
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADS7871 is not set
 # CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
@@ -1555,7 +1622,7 @@ CONFIG_MFD_SM501=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_HTC_I2CPLD is not set
 # CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
+CONFIG_TPS65010=m
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_T7L66XB is not set
@@ -1568,8 +1635,10 @@ CONFIG_MFD_SM501=y
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
+CONFIG_MFD_PCF50633=y
 # CONFIG_MFD_MC13783 is not set
+# CONFIG_PCF50633_ADC is not set
+CONFIG_PCF50633_GPIO=y
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
 # CONFIG_AB4500_CORE is not set
@@ -1685,6 +1754,7 @@ CONFIG_SND_S3C24XX_SOC_I2S=y
 CONFIG_SND_S3C_I2SV2_SOC=m
 CONFIG_SND_S3C2412_SOC_I2S=m
 CONFIG_SND_S3C_SOC_AC97=m
+# CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753 is not set
 CONFIG_SND_S3C24XX_SOC_JIVE_WM8750=m
 CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=m
 CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=m
@@ -1836,10 +1906,12 @@ CONFIG_USB_SERIAL_PL2303=y
 # CONFIG_USB_SERIAL_TI is not set
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
+CONFIG_USB_SERIAL_WWAN=m
 CONFIG_USB_SERIAL_OPTION=m
 # CONFIG_USB_SERIAL_OMNINET is not set
 # CONFIG_USB_SERIAL_OPTICON is not set
 # CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
+# CONFIG_USB_SERIAL_ZIO is not set
 # CONFIG_USB_SERIAL_DEBUG is not set
 #
@@ -1991,6 +2063,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_DRV_PCF50633 is not set
 #
 # on-CPU RTC drivers
@@ -1999,10 +2072,6 @@ CONFIG_RTC_DRV_S3C=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
-#
-# TI VLYNQ
-#
 # CONFIG_STAGING is not set
 #
@@ -2274,6 +2343,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
@@ -2284,6 +2354,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index a3a9993e5cd0..2b642386f030 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -1,11 +1,14 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.34
-# Sat May 22 03:17:32 2010
+# Fri May 28 19:05:39 2010
 #
 CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_ARCH_USES_GETTIMEOFFSET=y
 CONFIG_HAVE_PROC_CPU=y
 CONFIG_NO_IOPORT=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -34,6 +37,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
 CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
@@ -179,9 +183,11 @@ CONFIG_MMU=y
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_BCMRING is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
 # CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
@@ -217,7 +223,7 @@ CONFIG_MMU=y
 CONFIG_ARCH_S3C64XX=y
 # CONFIG_ARCH_S5P6440 is not set
 # CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PC100 is not set
 # CONFIG_ARCH_S5PV210 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
@@ -226,6 +232,7 @@ CONFIG_ARCH_S3C64XX=y
 # CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
 CONFIG_PLAT_SAMSUNG=y
 #
@@ -247,11 +254,17 @@ CONFIG_S3C_GPIO_TRACK=y
 # CONFIG_S3C_ADC is not set
 CONFIG_S3C_DEV_HSMMC=y
 CONFIG_S3C_DEV_HSMMC1=y
+CONFIG_S3C_DEV_HSMMC2=y
+CONFIG_S3C_DEV_HWMON=y
 CONFIG_S3C_DEV_I2C1=y
 CONFIG_S3C_DEV_FB=y
 CONFIG_S3C_DEV_USB_HOST=y
 CONFIG_S3C_DEV_USB_HSOTG=y
+CONFIG_S3C_DEV_WDT=y
 CONFIG_S3C_DEV_NAND=y
+CONFIG_S3C_DEV_RTC=y
+CONFIG_SAMSUNG_DEV_ADC=y
+CONFIG_SAMSUNG_DEV_TS=y
 CONFIG_S3C_DMA=y
 #
@@ -260,7 +273,9 @@ CONFIG_S3C_DMA=y
 # CONFIG_SAMSUNG_PM_DEBUG is not set
 # CONFIG_S3C_PM_DEBUG_LED_SMDK is not set
 # CONFIG_SAMSUNG_PM_CHECK is not set
+CONFIG_SAMSUNG_WAKEMASK=y
 CONFIG_PLAT_S3C64XX=y
+CONFIG_CPU_S3C6400=y
 CONFIG_CPU_S3C6410=y
 CONFIG_S3C64XX_DMA=y
 CONFIG_S3C64XX_SETUP_SDHCI=y
@@ -268,15 +283,18 @@ CONFIG_S3C64XX_SETUP_I2C0=y
 CONFIG_S3C64XX_SETUP_I2C1=y
 CONFIG_S3C64XX_SETUP_FB_24BPP=y
 CONFIG_S3C64XX_SETUP_SDHCI_GPIO=y
-# CONFIG_MACH_SMDK6400 is not set
+CONFIG_MACH_SMDK6400=y
-# CONFIG_MACH_ANW6410 is not set
+CONFIG_MACH_ANW6410=y
 CONFIG_MACH_SMDK6410=y
 CONFIG_SMDK6410_SD_CH0=y
 # CONFIG_SMDK6410_SD_CH1 is not set
 # CONFIG_SMDK6410_WM1190_EV1 is not set
 # CONFIG_SMDK6410_WM1192_EV1 is not set
-# CONFIG_MACH_NCP is not set
+CONFIG_MACH_NCP=y
-# CONFIG_MACH_HMT is not set
+CONFIG_MACH_HMT=y
+CONFIG_MACH_SMARTQ=y
+CONFIG_MACH_SMARTQ5=y
+CONFIG_MACH_SMARTQ7=y
 #
 # Processor Type
@@ -302,6 +320,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
 CONFIG_CPU_HAS_PMU=y
 # CONFIG_ARM_ERRATA_411920 is not set
 CONFIG_ARM_VIC=y
@@ -352,6 +371,7 @@ CONFIG_ALIGNMENT_TRAP=y
 CONFIG_ZBOOT_ROM_TEXT=0
 CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/linuxrc initrd=0x51000000,6M ramdisk_size=6144"
+# CONFIG_CMDLINE_FORCE is not set
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
@@ -430,6 +450,7 @@ CONFIG_MTD=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
 # CONFIG_MTD_OOPS is not set
 #
@@ -460,6 +481,9 @@ CONFIG_MTD_CFI_I2=y
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -472,9 +496,12 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_ECC=y
 # CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_SM_COMMON is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
 # CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_S3C2410=y
@@ -483,6 +510,7 @@ CONFIG_MTD_NAND_S3C2410=y
 # CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 #
@@ -503,6 +531,7 @@ CONFIG_BLK_DEV_LOOP=y
 #
 # DRBD disabled because PROC_FS, INET or CONNECTOR not selected
 #
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
@@ -516,12 +545,14 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ISL29003 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
 #
 # EEPROM support
 #
 CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
 # CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
@@ -569,6 +600,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
 # CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
@@ -635,9 +667,12 @@ CONFIG_SERIAL_SAMSUNG_UARTS=4
 # CONFIG_SERIAL_SAMSUNG_DEBUG is not set
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
 CONFIG_SERIAL_S3C6400=y
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -673,6 +708,7 @@ CONFIG_I2C_S3C2410=y
 #
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
 #
 # Other I2C/SMBus bus drivers
@@ -682,7 +718,24 @@ CONFIG_I2C_S3C2410=y
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=m
+CONFIG_SPI_GPIO=m
+CONFIG_SPI_S3C64XX=m
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
 #
 # PPS support
@@ -714,6 +767,9 @@ CONFIG_GPIOLIB=y
 #
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
 #
 # AC97 GPIO expanders:
@@ -729,6 +785,7 @@ CONFIG_HWMON=y
 #
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -750,6 +807,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
 # CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
@@ -764,6 +822,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -775,6 +834,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADS7871 is not set
 # CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
@@ -788,9 +848,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
 # CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_HAVE_S3C2410_WATCHDOG=y
 CONFIG_SSB_POSSIBLE=y
 #
@@ -823,7 +885,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_AB4500_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
@@ -832,8 +897,47 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_S3C=y
+# CONFIG_FB_S3C_DEBUG_REGWRITE is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_L4F00242T03 is not set
+# CONFIG_LCD_LMS283GF05 is not set
+CONFIG_LCD_LTV350QV=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+CONFIG_BACKLIGHT_PWM=y
 #
 # Display device support
@@ -845,6 +949,8 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
 CONFIG_SOUND=y
 CONFIG_SOUND_OSS_CORE=y
 CONFIG_SOUND_OSS_CORE_PRECLAIM=y
@@ -873,10 +979,16 @@ CONFIG_SND_DRIVERS=y
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
 CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
+# CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=m
 CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_S3C24XX_SOC=m
 CONFIG_SND_S3C_SOC_AC97=m
+# CONFIG_SND_S3C64XX_SOC_WM8580 is not set
 CONFIG_SND_SOC_SMDK_WM9713=m
 CONFIG_SND_SOC_I2C_AND_SPI=m
 # CONFIG_SND_SOC_ALL_CODECS is not set
@@ -886,29 +998,197 @@ CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HIDRAW is not set
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
 # CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+# CONFIG_HID_CANDO is not set
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+# CONFIG_HID_PRODIKEYS is not set
+CONFIG_HID_CYPRESS=y
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EGALAX is not set
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
+CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT_KONE is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 #
-# Enable Host or Gadget support to see Inventra options
+# Miscellaneous USB options
 #
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 #
 # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+# CONFIG_USB_LIBUSUAL is not set
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+# CONFIG_USB_EZUSB is not set
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP210X is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QCAUX is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
+# CONFIG_USB_SERIAL_ZIO is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 #
 # OTG and related infrastructure
 #
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
 CONFIG_MMC_UNSAFE_RESUME=y
@@ -928,18 +1208,80 @@ CONFIG_MMC_SDHCI=y
 # CONFIG_MMC_SDHCI_PLTFM is not set
 CONFIG_MMC_SDHCI_S3C=y
 # CONFIG_MMC_SDHCI_S3C_DMA is not set
+# CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_S3C=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
-#
-# TI VLYNQ
-#
 # CONFIG_STAGING is not set
 #
@@ -1033,7 +1375,46 @@ CONFIG_ROMFS_ON_BLOCK=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 #
 # Kernel hacking
@@ -1096,6 +1477,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
@@ -1106,6 +1488,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
diff --git a/arch/arm/configs/s5p6440_defconfig b/arch/arm/configs/s5p6440_defconfig
index 619bfab3ab39..532e987beb4d 100644
--- a/arch/arm/configs/s5p6440_defconfig
+++ b/arch/arm/configs/s5p6440_defconfig
@@ -1,11 +1,13 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.34
-# Sat May 22 03:18:18 2010
+# Wed May 26 19:04:32 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_ARCH_USES_GETTIMEOFFSET=y
 CONFIG_HAVE_PROC_CPU=y
 CONFIG_NO_IOPORT=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -33,6 +35,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
 CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
@@ -178,9 +181,11 @@ CONFIG_MMU=y
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_BCMRING is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
 # CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
@@ -216,7 +221,7 @@ CONFIG_MMU=y
 # CONFIG_ARCH_S3C64XX is not set
 CONFIG_ARCH_S5P6440=y
 # CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PC100 is not set
 # CONFIG_ARCH_S5PV210 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
@@ -225,6 +230,7 @@ CONFIG_ARCH_S5P6440=y
 # CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
 CONFIG_PLAT_SAMSUNG=y
 #
@@ -240,10 +246,15 @@ CONFIG_SAMSUNG_GPIOLIB_4BIT=y
 CONFIG_S3C_GPIO_CFG_S3C24XX=y
 CONFIG_S3C_GPIO_CFG_S3C64XX=y
 CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_S5P_GPIO_DRVSTR=y
 CONFIG_SAMSUNG_GPIO_EXTRA=0
 CONFIG_S3C_GPIO_SPACE=0
 CONFIG_S3C_GPIO_TRACK=y
 # CONFIG_S3C_ADC is not set
+CONFIG_S3C_DEV_WDT=y
+CONFIG_SAMSUNG_DEV_ADC=y
+CONFIG_SAMSUNG_DEV_TS=y
+CONFIG_S3C_PL330_DMA=y
 #
 # Power management
@@ -276,10 +287,12 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
 CONFIG_CPU_HAS_PMU=y
 # CONFIG_ARM_ERRATA_411920 is not set
 CONFIG_ARM_VIC=y
 CONFIG_ARM_VIC_NR=2
+CONFIG_PL330=y
 #
 # Bus support
@@ -326,6 +339,7 @@ CONFIG_ALIGNMENT_TRAP=y
 CONFIG_ZBOOT_ROM_TEXT=0
 CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
+# CONFIG_CMDLINE_FORCE is not set
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
@@ -490,7 +504,9 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_AD7879 is not set
 # CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_S3C2410 is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
@@ -546,6 +562,8 @@ CONFIG_SERIAL_S3C6400=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -593,6 +611,7 @@ CONFIG_GPIOLIB=y
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_HAVE_S3C2410_WATCHDOG=y
 CONFIG_SSB_POSSIBLE=y
 #
@@ -649,10 +668,6 @@ CONFIG_RTC_LIB=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
-#
-# TI VLYNQ
-#
 # CONFIG_STAGING is not set
 #
@@ -850,6 +865,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
@@ -860,6 +876,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
diff --git a/arch/arm/configs/s5p6442_defconfig b/arch/arm/configs/s5p6442_defconfig
index d7ea27509cf4..068219b360f5 100644
--- a/arch/arm/configs/s5p6442_defconfig
+++ b/arch/arm/configs/s5p6442_defconfig
@@ -1,11 +1,13 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.34
-# Sat May 22 03:18:19 2010
+# Wed May 26 19:04:34 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_ARCH_USES_GETTIMEOFFSET=y
 CONFIG_HAVE_PROC_CPU=y
 CONFIG_NO_IOPORT=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -33,6 +35,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
 CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
@@ -178,9 +181,11 @@ CONFIG_MMU=y
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_BCMRING is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
 # CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
@@ -216,7 +221,7 @@ CONFIG_MMU=y
 # CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_S5P6440 is not set
 CONFIG_ARCH_S5P6442=y
-# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PC100 is not set
 # CONFIG_ARCH_S5PV210 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
@@ -225,6 +230,7 @@ CONFIG_ARCH_S5P6442=y
 # CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
 CONFIG_PLAT_SAMSUNG=y
 #
@@ -240,10 +246,12 @@ CONFIG_SAMSUNG_GPIOLIB_4BIT=y
 CONFIG_S3C_GPIO_CFG_S3C24XX=y
 CONFIG_S3C_GPIO_CFG_S3C64XX=y
 CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_S5P_GPIO_DRVSTR=y
 CONFIG_SAMSUNG_GPIO_EXTRA=0
 CONFIG_S3C_GPIO_SPACE=0
 CONFIG_S3C_GPIO_TRACK=y
 # CONFIG_S3C_ADC is not set
+CONFIG_S3C_PL330_DMA=y
 #
 # Power management
@@ -276,10 +284,12 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
 CONFIG_CPU_HAS_PMU=y
 # CONFIG_ARM_ERRATA_411920 is not set
 CONFIG_ARM_VIC=y
 CONFIG_ARM_VIC_NR=2
+CONFIG_PL330=y
 #
 # Bus support
@@ -326,6 +336,7 @@ CONFIG_ALIGNMENT_TRAP=y
 CONFIG_ZBOOT_ROM_TEXT=0
 CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
+# CONFIG_CMDLINE_FORCE is not set
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
@@ -471,6 +482,7 @@ CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_AD7879 is not set
 # CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
@@ -525,6 +537,8 @@ CONFIG_SERIAL_S5PV210=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -624,10 +638,6 @@ CONFIG_RTC_LIB=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
-#
-# TI VLYNQ
-#
 # CONFIG_STAGING is not set
 #
@@ -836,6 +846,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
@@ -846,6 +857,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
diff --git a/arch/arm/configs/s5pc100_defconfig b/arch/arm/configs/s5pc100_defconfig
index 2053be6c9af1..ebc6245b9fca 100644
--- a/arch/arm/configs/s5pc100_defconfig
+++ b/arch/arm/configs/s5pc100_defconfig
@@ -1,12 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
+# Linux kernel version: 2.6.34
-# Wed Jul  1 15:53:07 2009
+# Wed May 26 19:04:35 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
-CONFIG_MMU=y
+CONFIG_GENERIC_TIME=y
+CONFIG_ARCH_USES_GETTIMEOFFSET=y
+CONFIG_HAVE_PROC_CPU=y
 CONFIG_NO_IOPORT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
@@ -18,7 +20,9 @@ CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
@@ -31,6 +35,13 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 # CONFIG_SYSVIPC is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
@@ -38,14 +49,15 @@ CONFIG_SWAP=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
+CONFIG_TREE_RCU=y
-# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -59,6 +71,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -80,19 +93,21 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
@@ -122,25 +137,56 @@ CONFIG_LBDAF=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
 # CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
 # CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
@@ -156,6 +202,7 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
 # CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
@@ -164,39 +211,64 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
 CONFIG_ARCH_S5PC100=y
+# CONFIG_ARCH_S5PV210 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-CONFIG_PLAT_S3C=y
+# CONFIG_PLAT_SPEAR is not set
+CONFIG_PLAT_SAMSUNG=y
 #
 # Boot options
 #
 # CONFIG_S3C_BOOT_ERROR_RESET is not set
 CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+CONFIG_S3C_LOWLEVEL_UART_PORT=0
+CONFIG_SAMSUNG_CLKSRC=y
+CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
+CONFIG_SAMSUNG_IRQ_UART=y
+CONFIG_SAMSUNG_GPIOLIB_4BIT=y
+CONFIG_S3C_GPIO_CFG_S3C24XX=y
+CONFIG_S3C_GPIO_CFG_S3C64XX=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_S5P_GPIO_DRVSTR=y
+CONFIG_SAMSUNG_GPIO_EXTRA=0
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+# CONFIG_S3C_ADC is not set
+CONFIG_S3C_DEV_HSMMC=y
+CONFIG_S3C_DEV_HSMMC1=y
+CONFIG_S3C_DEV_HSMMC2=y
+CONFIG_S3C_DEV_I2C1=y
+CONFIG_S3C_DEV_FB=y
+CONFIG_S3C_PL330_DMA=y
 #
 # Power management
 #
-CONFIG_S3C_LOWLEVEL_UART_PORT=0
+CONFIG_PLAT_S5P=y
-CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S5P_EXT_INT=y
-CONFIG_S3C_GPIO_TRACK=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_PLAT_S5PC1XX=y
-CONFIG_CPU_S5PC100_INIT=y
-CONFIG_CPU_S5PC100_CLOCK=y
-CONFIG_S5PC100_SETUP_I2C0=y
 CONFIG_CPU_S5PC100=y
+CONFIG_S5PC100_SETUP_FB_24BPP=y
+CONFIG_S5PC100_SETUP_I2C1=y
+CONFIG_S5PC100_SETUP_SDHCI=y
+CONFIG_S5PC100_SETUP_SDHCI_GPIO=y
 CONFIG_MACH_SMDKC100=y
 #
@@ -206,7 +278,7 @@ CONFIG_CPU_32v6K=y
 CONFIG_CPU_V7=y
 CONFIG_CPU_32v7=y
 CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_PABRT_V7=y
 CONFIG_CPU_CACHE_V7=y
 CONFIG_CPU_CACHE_VIPT=y
 CONFIG_CPU_COPY_V6=y
@@ -224,11 +296,15 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
+CONFIG_CPU_HAS_PMU=y
 # CONFIG_ARM_ERRATA_430973 is not set
 # CONFIG_ARM_ERRATA_458693 is not set
 # CONFIG_ARM_ERRATA_460075 is not set
 CONFIG_ARM_VIC=y
 CONFIG_ARM_VIC_NR=2
+CONFIG_PL330=y
 #
 # Bus support
@@ -244,8 +320,11 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
+# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
@@ -258,12 +337,11 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_SPLIT_PTLOCK_CPUS=999999
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
+# CONFIG_KSM is not set
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
 # CONFIG_UACCESS_WITH_MEMCPY is not set
@@ -274,6 +352,7 @@ CONFIG_ALIGNMENT_TRAP=y
 CONFIG_ZBOOT_ROM_TEXT=0
 CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC2,115200 mem=128M"
+# CONFIG_CMDLINE_FORCE is not set
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
@@ -317,6 +396,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -331,6 +411,10 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
@@ -338,9 +422,12 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 #
@@ -350,18 +437,21 @@ CONFIG_EEPROM_AT24=y
 # CONFIG_EEPROM_LEGACY is not set
 # CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
+# CONFIG_PHONE is not set
 #
 # Input device support
@@ -369,6 +459,7 @@ CONFIG_HAVE_IDE=y
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 #
 # Userland interfaces
@@ -385,13 +476,19 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -399,6 +496,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
@@ -418,6 +516,7 @@ CONFIG_SERIO=y
 CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
 # CONFIG_GAMEPORT is not set
 #
@@ -444,11 +543,16 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS=3
+CONFIG_SERIAL_SAMSUNG_UARTS_4=y
+CONFIG_SERIAL_SAMSUNG_UARTS=4
 # CONFIG_SERIAL_SAMSUNG_DEBUG is not set
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_S3C6400=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -461,6 +565,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
@@ -471,9 +576,11 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 #
 # External I2C/SMBus adapter drivers
@@ -486,20 +593,15 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -508,13 +610,16 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 #
 # PCI GPIO expanders:
@@ -523,10 +628,19 @@ CONFIG_GPIOLIB=y
 #
 # SPI GPIO expanders:
 #
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -535,10 +649,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -549,6 +664,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -573,8 +689,10 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -584,9 +702,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
@@ -599,10 +716,12 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
@@ -610,10 +729,15 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 #
@@ -637,7 +761,6 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-CONFIG_HID_DEBUG=y
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
@@ -680,13 +803,12 @@ CONFIG_SDIO_UART=y
 CONFIG_MMC_SDHCI=y
 # CONFIG_MMC_SDHCI_PLTFM is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
@@ -710,6 +832,7 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -758,6 +881,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -772,7 +896,6 @@ CONFIG_ROMFS_BACKED_BY_BLOCK=y
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 #
 # Partition Types
@@ -789,6 +912,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -826,11 +950,13 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
@@ -839,6 +965,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
@@ -849,6 +976,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -857,8 +985,9 @@ CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
 # CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_PORT=y
+# CONFIG_OC_ETM is not set
 CONFIG_DEBUG_S3C_UART=0
 #
@@ -867,7 +996,11 @@ CONFIG_DEBUG_S3C_UART=0
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
 # CONFIG_BINARY_PRINTF is not set
@@ -884,8 +1017,10 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_DECOMPRESS_GZIP=y
 CONFIG_DECOMPRESS_BZIP2=y
 CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5pc110_defconfig b/arch/arm/configs/s5pc110_defconfig
index 796cb78498c3..c4de360b0f69 100644
--- a/arch/arm/configs/s5pc110_defconfig
+++ b/arch/arm/configs/s5pc110_defconfig
@@ -1,11 +1,13 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.34
-# Sat May 22 03:18:21 2010
+# Wed May 26 19:04:37 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_ARCH_USES_GETTIMEOFFSET=y
 CONFIG_HAVE_PROC_CPU=y
 CONFIG_NO_IOPORT=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -35,6 +37,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
 CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
@@ -180,9 +183,11 @@ CONFIG_MMU=y
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_BCMRING is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
 # CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
@@ -218,7 +223,7 @@ CONFIG_MMU=y
 # CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_S5P6440 is not set
 # CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PC100 is not set
 CONFIG_ARCH_S5PV210=y
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
@@ -227,6 +232,7 @@ CONFIG_ARCH_S5PV210=y
 # CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
 CONFIG_PLAT_SAMSUNG=y
 #
@@ -242,16 +248,22 @@ CONFIG_SAMSUNG_GPIOLIB_4BIT=y
 CONFIG_S3C_GPIO_CFG_S3C24XX=y
 CONFIG_S3C_GPIO_CFG_S3C64XX=y
 CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_S5P_GPIO_DRVSTR=y
 CONFIG_SAMSUNG_GPIO_EXTRA=0
 CONFIG_S3C_GPIO_SPACE=0
 CONFIG_S3C_GPIO_TRACK=y
 # CONFIG_S3C_ADC is not set
+CONFIG_S3C_DEV_WDT=y
+CONFIG_S3C_PL330_DMA=y
 #
 # Power management
 #
 CONFIG_PLAT_S5P=y
+CONFIG_S5P_EXT_INT=y
 CONFIG_CPU_S5PV210=y
+# CONFIG_MACH_AQUILA is not set
+# CONFIG_MACH_GONI is not set
 # CONFIG_MACH_SMDKV210 is not set
 CONFIG_MACH_SMDKC110=y
@@ -281,12 +293,14 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_HAS_TLS_REG=y
 CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
 CONFIG_CPU_HAS_PMU=y
 # CONFIG_ARM_ERRATA_430973 is not set
 # CONFIG_ARM_ERRATA_458693 is not set
 # CONFIG_ARM_ERRATA_460075 is not set
 CONFIG_ARM_VIC=y
 CONFIG_ARM_VIC_NR=2
+CONFIG_PL330=y
 #
 # Bus support
@@ -335,6 +349,7 @@ CONFIG_ALIGNMENT_TRAP=y
 CONFIG_ZBOOT_ROM_TEXT=0
 CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
+# CONFIG_CMDLINE_FORCE is not set
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
@@ -481,6 +496,7 @@ CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_AD7879 is not set
 # CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
@@ -536,6 +552,8 @@ CONFIG_SERIAL_S5PV210=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -583,6 +601,7 @@ CONFIG_GPIOLIB=y
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_HAVE_S3C2410_WATCHDOG=y
 CONFIG_SSB_POSSIBLE=y
 #
@@ -635,10 +654,6 @@ CONFIG_RTC_LIB=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
-#
-# TI VLYNQ
-#
 # CONFIG_STAGING is not set
 #
@@ -847,6 +862,8 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
@@ -857,6 +874,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig
index 6831dab97d96..e2f5bce29828 100644
--- a/arch/arm/configs/s5pv210_defconfig
+++ b/arch/arm/configs/s5pv210_defconfig
@@ -1,11 +1,13 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.34
-# Sat May 22 03:18:22 2010
+# Wed May 26 19:04:39 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_ARCH_USES_GETTIMEOFFSET=y
 CONFIG_HAVE_PROC_CPU=y
 CONFIG_NO_IOPORT=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -35,6 +37,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
 CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
@@ -180,9 +183,11 @@ CONFIG_MMU=y
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_BCMRING is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
 # CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
@@ -218,7 +223,7 @@ CONFIG_MMU=y
 # CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_S5P6440 is not set
 # CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PC100 is not set
 CONFIG_ARCH_S5PV210=y
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
@@ -227,6 +232,7 @@ CONFIG_ARCH_S5PV210=y
 # CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
 CONFIG_PLAT_SAMSUNG=y
 #
@@ -242,16 +248,24 @@ CONFIG_SAMSUNG_GPIOLIB_4BIT=y
 CONFIG_S3C_GPIO_CFG_S3C24XX=y
 CONFIG_S3C_GPIO_CFG_S3C64XX=y
 CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_S5P_GPIO_DRVSTR=y
 CONFIG_SAMSUNG_GPIO_EXTRA=0
 CONFIG_S3C_GPIO_SPACE=0
 CONFIG_S3C_GPIO_TRACK=y
 # CONFIG_S3C_ADC is not set
+CONFIG_S3C_DEV_WDT=y
+CONFIG_SAMSUNG_DEV_ADC=y
+CONFIG_SAMSUNG_DEV_TS=y
+CONFIG_S3C_PL330_DMA=y
 #
 # Power management
 #
 CONFIG_PLAT_S5P=y
+CONFIG_S5P_EXT_INT=y
 CONFIG_CPU_S5PV210=y
+# CONFIG_MACH_AQUILA is not set
+# CONFIG_MACH_GONI is not set
 CONFIG_MACH_SMDKV210=y
 # CONFIG_MACH_SMDKC110 is not set
@@ -281,12 +295,14 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_HAS_TLS_REG=y
 CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
 CONFIG_CPU_HAS_PMU=y
 # CONFIG_ARM_ERRATA_430973 is not set
 # CONFIG_ARM_ERRATA_458693 is not set
 # CONFIG_ARM_ERRATA_460075 is not set
 CONFIG_ARM_VIC=y
 CONFIG_ARM_VIC_NR=2
+CONFIG_PL330=y
 #
 # Bus support
@@ -335,6 +351,7 @@ CONFIG_ALIGNMENT_TRAP=y
 CONFIG_ZBOOT_ROM_TEXT=0
 CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
+# CONFIG_CMDLINE_FORCE is not set
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
@@ -481,7 +498,9 @@ CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_AD7879 is not set
 # CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_S3C2410 is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
@@ -536,6 +555,8 @@ CONFIG_SERIAL_S5PV210=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -583,6 +604,7 @@ CONFIG_GPIOLIB=y
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_HAVE_S3C2410_WATCHDOG=y
 CONFIG_SSB_POSSIBLE=y
 #
@@ -635,10 +657,6 @@ CONFIG_RTC_LIB=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
-#
-# TI VLYNQ
-#
 # CONFIG_STAGING is not set
 #
@@ -847,6 +865,8 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
@@ -857,6 +877,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
diff --git a/arch/arm/include/asm/scatterlist.h b/arch/arm/include/asm/scatterlist.h
index bcda59f39941..2f87870d9347 100644
--- a/arch/arm/include/asm/scatterlist.h
+++ b/arch/arm/include/asm/scatterlist.h
@@ -3,9 +3,6 @@
 #include <asm/memory.h>
 #include <asm/types.h>
 #include <asm-generic/scatterlist.h>
-#undef ARCH_HAS_SG_CHAIN
 #endif /* _ASMARM_SCATTERLIST_H */
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index abd04932917b..2ec3095ffb7b 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -17,6 +17,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
 #include <linux/i2c/pca953x.h>
+#include <linux/mfd/tps6507x.h>
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
@@ -24,6 +25,8 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/regulator/machine.h>
+#include <linux/mfd/tps6507x.h>
+#include <linux/input/tps6507x-ts.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -533,10 +536,24 @@ struct regulator_init_data tps65070_regulator_data[] = {
        },
 };
+static struct touchscreen_init_data tps6507x_touchscreen_data = {
+        .poll_period =  30,     /* ms between touch samples */
+        .min_pressure = 0x30,   /* minimum pressure to trigger touch */
+        .vref = 0,              /* turn off vref when not using A/D */
+        .vendor = 0,            /* /sys/class/input/input?/id/vendor */
+        .product = 65070,       /* /sys/class/input/input?/id/product */
+        .version = 0x100,       /* /sys/class/input/input?/id/version */
+};
+static struct tps6507x_board tps_board = {
+        .tps6507x_pmic_init_data = &tps65070_regulator_data[0],
+        .tps6507x_ts_init_data = &tps6507x_touchscreen_data,
+};
 static struct i2c_board_info __initdata da850evm_tps65070_info[] = {
        {
                I2C_BOARD_INFO("tps6507x", 0x48),
-                .platform_data = &tps65070_regulator_data[0],
+                .platform_data = &tps_board,
        },
 };
diff --git a/arch/arm/mach-davinci/include/mach/mmc.h b/arch/arm/mach-davinci/include/mach/mmc.h
index 5a85e24f3673..d4f1e9675069 100644
--- a/arch/arm/mach-davinci/include/mach/mmc.h
+++ b/arch/arm/mach-davinci/include/mach/mmc.h
@@ -22,6 +22,9 @@ struct davinci_mmc_config {
        /* Version of the MMC/SD controller */
        u8      version;
+        /* Number of sg segments */
+        u8      nr_sg;
 };
 void davinci_setup_mmc(int module, struct davinci_mmc_config *config);
diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-imx/Kconfig
index 3f756f4ad050..c5c0369bb481 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,42 +1,103 @@
+config IMX_HAVE_DMA_V1
+        bool
+if ARCH_MX1
+config SOC_IMX1
+        select CPU_ARM920T
+        select IMX_HAVE_DMA_V1
+        select IMX_HAVE_IOMUX_V1
+        bool
+comment "MX1 platforms:"
+config MACH_MXLADS
+        bool
+config ARCH_MX1ADS
+        bool "MX1ADS platform"
+        select MACH_MXLADS
+        select IMX_HAVE_PLATFORM_IMX_I2C
+        select IMX_HAVE_PLATFORM_IMX_UART
+        help
+          Say Y here if you are using Motorola MX1ADS/MXLADS boards
+config MACH_SCB9328
+        bool "Synertronixx scb9328"
+        select IMX_HAVE_PLATFORM_IMX_UART
+        help
+          Say Y here if you are using a Synertronixx scb9328 board
+endif
 if ARCH_MX2
+config SOC_IMX21
+        select CPU_ARM926T
+        select ARCH_MXC_AUDMUX_V1
+        select IMX_HAVE_DMA_V1
+        select IMX_HAVE_IOMUX_V1
+        bool
+config SOC_IMX27
+        select CPU_ARM926T
+        select ARCH_MXC_AUDMUX_V1
+        select IMX_HAVE_DMA_V1
+        select IMX_HAVE_IOMUX_V1
+        bool
 choice
        prompt "CPUs:"
        default MACH_MX21
 config MACH_MX21
        bool "i.MX21 support"
-        select ARCH_MXC_AUDMUX_V1
+        select SOC_IMX21
        help
          This enables support for Freescale's MX2 based i.MX21 processor.
 config MACH_MX27
        bool "i.MX27 support"
-        select ARCH_MXC_AUDMUX_V1
+        select SOC_IMX27
        help
          This enables support for Freescale's MX2 based i.MX27 processor.
 endchoice
-comment "MX2 platforms:"
+endif
+if MACH_MX21
+comment "MX21 platforms:"
 config MACH_MX21ADS
        bool "MX21ADS platform"
-        depends on MACH_MX21
+        select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_MXC_NAND
        help
          Include support for MX21ADS platform. This includes specific
          configurations for the board and its peripherals.
+endif
+if MACH_MX27
+comment "MX27 platforms:"
 config MACH_MX27ADS
        bool "MX27ADS platform"
-        depends on MACH_MX27
+        select IMX_HAVE_PLATFORM_IMX_I2C
+        select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_MXC_NAND
        help
          Include support for MX27ADS platform. This includes specific
          configurations for the board and its peripherals.
 config MACH_PCM038
        bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
-        depends on MACH_MX27
+        select IMX_HAVE_PLATFORM_IMX_I2C
+        select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_MXC_NAND
+        select IMX_HAVE_PLATFORM_SPI_IMX
        select MXC_ULPI if USB_ULPI
        help
          Include support for phyCORE-i.MX27 (aka pcm038) platform. This
@@ -58,8 +119,9 @@ endchoice
 config MACH_CPUIMX27
        bool "Eukrea CPUIMX27 module"
-        depends on MACH_MX27
+        select IMX_HAVE_PLATFORM_IMX_I2C
-        select MXC_ULPI if USB_ULPI
+        select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_MXC_NAND
        help
          Include support for Eukrea CPUIMX27 platform. This includes
          specific configurations for the module and its peripherals.
@@ -86,6 +148,8 @@ choice
 config MACH_EUKREA_MBIMX27_BASEBOARD
        prompt "Eukrea MBIMX27 development board"
        bool
+        select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_SPI_IMX
        help
          This adds board specific devices that can be found on Eukrea's
          MBIMX27 evaluation board.
@@ -94,21 +158,24 @@ endchoice
 config MACH_MX27_3DS
        bool "MX27PDK platform"
-        depends on MACH_MX27
+        select IMX_HAVE_PLATFORM_IMX_UART
        help
          Include support for MX27PDK platform. This includes specific
          configurations for the board and its peripherals.
 config MACH_IMX27LITE
        bool "LogicPD MX27 LITEKIT platform"
-        depends on MACH_MX27
+        select IMX_HAVE_PLATFORM_IMX_UART
        help
          Include support for MX27 LITEKIT platform. This includes specific
          configurations for the board and its peripherals.
 config MACH_PCA100
        bool "Phytec phyCARD-s (pca100)"
-        depends on MACH_MX27
+        select IMX_HAVE_PLATFORM_IMX_I2C
+        select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_MXC_NAND
+        select IMX_HAVE_PLATFORM_SPI_IMX
        select MXC_ULPI if USB_ULPI
        help
          Include support for phyCARD-s (aka pca100) platform. This
@@ -116,7 +183,9 @@ config MACH_PCA100
 config MACH_MXT_TD60
        bool "Maxtrack i-MXT TD60"
-        depends on MACH_MX27
+        select IMX_HAVE_PLATFORM_IMX_I2C
+        select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_MXC_NAND
        help
          Include support for i-MXT (aka td60) platform. This
          includes specific configurations for the module and its peripherals.
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-imx/Makefile
index 27d496c3e5cb..46a9fdfbbd15 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -4,14 +4,24 @@
 # Object file lists.
-obj-y   :=  devices.o serial.o
+obj-y   :=  devices.o
-obj-$(CONFIG_MACH_MX21) += clock_imx21.o mm-imx21.o
+obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o
-obj-$(CONFIG_MACH_MX27) += cpu_imx27.o pm-imx27.o
+obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o
-obj-$(CONFIG_MACH_MX27) += clock_imx27.o mm-imx27.o
+obj-$(CONFIG_MACH_MX21) += clock-imx21.o mm-imx21.o
+obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o
+obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o
+# Support for CMOS sensor interface
+obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
+obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
+obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
 obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
 obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
 obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
 obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
diff --git a/arch/arm/mach-mx2/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index e867398a8fdb..7988a85cf07d 100644
--- a/arch/arm/mach-mx2/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -1,3 +1,7 @@
+zreladdr-$(CONFIG_ARCH_MX1)     := 0x08008000
+params_phys-$(CONFIG_ARCH_MX1)  := 0x08000100
+initrd_phys-$(CONFIG_ARCH_MX1)  := 0x08800000
 zreladdr-$(CONFIG_MACH_MX21)    := 0xC0008000
 params_phys-$(CONFIG_MACH_MX21) := 0xC0000100
 initrd_phys-$(CONFIG_MACH_MX21) := 0xC0800000
diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-imx/clock-imx1.c
index 6cf2d4a7511d..c05096c38301 100644
--- a/arch/arm/mach-mx1/clock.c
+++ b/arch/arm/mach-imx/clock-imx1.c
@@ -2,18 +2,17 @@
 *  Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
 *
 * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
+ * it under the terms of the GNU General Public License version 2 as
- * the Free Software Foundation; either version 2 of the License, or
+ * published by the Free Software Foundation.
- * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
- * You should have received a copy of the GNU General Public License
+ * You should have received a copy of the GNU General Public License along
- * along with this program; if not, write to the Free Software
+ * with this program; if not, write to the Free Software Foundation, Inc.,
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
 */
 #include <linux/kernel.h>
@@ -29,7 +28,41 @@
 #include <mach/clock.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include "crm_regs.h"
+#define IO_ADDR_CCM(off)        (MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR + (off)))
+/* CCM register addresses */
+#define CCM_CSCR        IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0      IO_ADDR_CCM(0x4)
+#define CCM_SPCTL0      IO_ADDR_CCM(0xc)
+#define CCM_PCDR        IO_ADDR_CCM(0x20)
+#define CCM_CSCR_CLKO_OFFSET    29
+#define CCM_CSCR_CLKO_MASK      (0x7 << 29)
+#define CCM_CSCR_USB_OFFSET     26
+#define CCM_CSCR_USB_MASK       (0x7 << 26)
+#define CCM_CSCR_OSC_EN_SHIFT   17
+#define CCM_CSCR_SYSTEM_SEL     (1 << 16)
+#define CCM_CSCR_BCLK_OFFSET    10
+#define CCM_CSCR_BCLK_MASK      (0xf << 10)
+#define CCM_CSCR_PRESC          (1 << 15)
+#define CCM_PCDR_PCLK3_OFFSET   16
+#define CCM_PCDR_PCLK3_MASK     (0x7f << 16)
+#define CCM_PCDR_PCLK2_OFFSET   4
+#define CCM_PCDR_PCLK2_MASK     (0xf << 4)
+#define CCM_PCDR_PCLK1_OFFSET   0
+#define CCM_PCDR_PCLK1_MASK     0xf
+#define IO_ADDR_SCM(off)        (MX1_IO_ADDRESS(MX1_SCM_BASE_ADDR + (off)))
+/* SCM register addresses */
+#define SCM_GCCR        IO_ADDR_SCM(0xc)
+#define SCM_GCCR_DMA_CLK_EN_OFFSET      3
+#define SCM_GCCR_CSI_CLK_EN_OFFSET      2
+#define SCM_GCCR_MMA_CLK_EN_OFFSET      1
+#define SCM_GCCR_USBD_CLK_EN_OFFSET     0
 static int _clk_enable(struct clk *clk)
 {
@@ -596,7 +629,8 @@ int __init mx1_clocks_init(unsigned long fref)
        clk_enable(&hclk);
        clk_enable(&fclk);
-        mxc_timer_init(&gpt_clk, IO_ADDRESS(TIM1_BASE_ADDR), TIM1_INT);
+        mxc_timer_init(&gpt_clk, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR),
+                        MX1_TIM1_INT);
        return 0;
 }
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-imx/clock-imx21.c
index bb419ef4d133..bb419ef4d133 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-imx/clock-imx21.c
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-imx/clock-imx27.c
index 5a1aa15c8a16..5a1aa15c8a16 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-imx/clock-imx27.c
diff --git a/arch/arm/mach-mx2/cpu_imx27.c b/arch/arm/mach-imx/cpu-imx27.c
index d8d3b2d84dc5..d8d3b2d84dc5 100644
--- a/arch/arm/mach-mx2/cpu_imx27.c
+++ b/arch/arm/mach-imx/cpu-imx27.c
diff --git a/arch/arm/mach-imx/devices-imx1.h b/arch/arm/mach-imx/devices-imx1.h
new file mode 100644
index 000000000000..a8d94f078196
--- /dev/null
+++ b/arch/arm/mach-imx/devices-imx1.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx1.h>
+#include <mach/devices-common.h>
+#define imx1_add_i2c_imx(pdata)         \
+        imx_add_imx_i2c(0, MX1_I2C_BASE_ADDR, SZ_4K, MX1_INT_I2C, pdata)
+#define imx1_add_imx_uart0(pdata)       \
+        imx_add_imx_uart_3irq(0, MX1_UART1_BASE_ADDR, 0xd0, MX1_INT_UART1RX, MX1_INT_UART1TX, MX1_INT_UART1RTS, pdata)
+#define imx1_add_imx_uart1(pdata)       \
+        imx_add_imx_uart_3irq(0, MX1_UART2_BASE_ADDR, 0xd0, MX1_INT_UART2RX, MX1_INT_UART2TX, MX1_INT_UART2RTS, pdata)
diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h
new file mode 100644
index 000000000000..42788e99d127
--- /dev/null
+++ b/arch/arm/mach-imx/devices-imx21.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx21.h>
+#include <mach/devices-common.h>
+#define imx21_add_i2c_imx(pdata)        \
+        imx_add_imx_i2c(0, MX2x_I2C_BASE_ADDR, SZ_4K, MX2x_INT_I2C, pdata)
+#define imx21_add_imx_uart0(pdata)      \
+        imx_add_imx_uart_1irq(0, MX21_UART1_BASE_ADDR, SZ_4K, MX21_INT_UART1, pdata)
+#define imx21_add_imx_uart1(pdata)      \
+        imx_add_imx_uart_1irq(1, MX21_UART2_BASE_ADDR, SZ_4K, MX21_INT_UART2, pdata)
+#define imx21_add_imx_uart2(pdata)      \
+        imx_add_imx_uart_1irq(2, MX21_UART3_BASE_ADDR, SZ_4K, MX21_INT_UART3, pdata)
+#define imx21_add_imx_uart3(pdata)      \
+        imx_add_imx_uart_1irq(3, MX21_UART4_BASE_ADDR, SZ_4K, MX21_INT_UART4, pdata)
+#define imx21_add_mxc_nand(pdata)       \
+        imx_add_mxc_nand_v1(MX21_NFC_BASE_ADDR, MX21_INT_NANDFC, pdata)
+#define imx21_add_spi_imx0(pdata)       \
+        imx_add_spi_imx(0, MX21_CSPI1_BASE_ADDR, SZ_4K, MX21_INT_CSPI1, pdata)
+#define imx21_add_spi_imx1(pdata)       \
+        imx_add_spi_imx(1, MX21_CSPI2_BASE_ADDR, SZ_4K, MX21_INT_CSPI2, pdata)
diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h
new file mode 100644
index 000000000000..65e7bb7ec2e8
--- /dev/null
+++ b/arch/arm/mach-imx/devices-imx27.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx27.h>
+#include <mach/devices-common.h>
+#define imx27_add_i2c_imx0(pdata)       \
+        imx_add_imx_i2c(0, MX27_I2C1_BASE_ADDR, SZ_4K, MX27_INT_I2C1, pdata)
+#define imx27_add_i2c_imx1(pdata)       \
+        imx_add_imx_i2c(1, MX27_I2C2_BASE_ADDR, SZ_4K, MX27_INT_I2C2, pdata)
+#define imx27_add_imx_uart0(pdata)      \
+        imx_add_imx_uart_1irq(0, MX27_UART1_BASE_ADDR, SZ_4K, MX27_INT_UART1, pdata)
+#define imx27_add_imx_uart1(pdata)      \
+        imx_add_imx_uart_1irq(1, MX27_UART2_BASE_ADDR, SZ_4K, MX27_INT_UART2, pdata)
+#define imx27_add_imx_uart2(pdata)      \
+        imx_add_imx_uart_1irq(2, MX27_UART3_BASE_ADDR, SZ_4K, MX27_INT_UART3, pdata)
+#define imx27_add_imx_uart3(pdata)      \
+        imx_add_imx_uart_1irq(3, MX27_UART4_BASE_ADDR, SZ_4K, MX27_INT_UART4, pdata)
+#define imx27_add_imx_uart4(pdata)      \
+        imx_add_imx_uart_1irq(4, MX27_UART5_BASE_ADDR, SZ_4K, MX27_INT_UART5, pdata)
+#define imx27_add_imx_uart5(pdata)      \
+        imx_add_imx_uart_1irq(5, MX27_UART6_BASE_ADDR, SZ_4K, MX27_INT_UART6, pdata)
+#define imx27_add_mxc_nand(pdata)       \
+        imx_add_mxc_nand_v1(MX27_NFC_BASE_ADDR, MX27_INT_NANDFC, pdata)
+#define imx27_add_spi_imx0(pdata)       \
+        imx_add_spi_imx(0, MX27_CSPI1_BASE_ADDR, SZ_4K, MX27_INT_CSPI1, pdata)
+#define imx27_add_spi_imx1(pdata)       \
+        imx_add_spi_imx(1, MX27_CSPI2_BASE_ADDR, SZ_4K, MX27_INT_CSPI2, pdata)
+#define imx27_add_spi_imx2(pdata)       \
+        imx_add_spi_imx(2, MX27_CSPI3_BASE_ADDR, SZ_4K, MX27_INT_CSPI3, pdata)
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-imx/devices.c
index 28caa21cb56e..9c271a752b84 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-imx/devices.c
@@ -11,6 +11,9 @@
 *
 * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
 * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ * Copyright (c) 2008 Darius Augulis <darius.augulis@teltonika.lt>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
@@ -32,6 +35,7 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/dma-mapping.h>
+#include <linux/serial.h>
 #include <mach/irqs.h>
 #include <mach/hardware.h>
@@ -40,6 +44,150 @@
 #include "devices.h"
+#if defined(CONFIG_ARCH_MX1)
+static struct resource imx1_camera_resources[] = {
+        {
+                .start  = 0x00224000,
+                .end    = 0x00224010,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .start  = MX1_CSI_INT,
+                .end    = MX1_CSI_INT,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+static u64 imx1_camera_dmamask = DMA_BIT_MASK(32);
+struct platform_device imx1_camera_device = {
+        .name           = "mx1-camera",
+        .id             = 0, /* This is used to put cameras on this interface */
+        .dev            = {
+                .dma_mask = &imx1_camera_dmamask,
+                .coherent_dma_mask = DMA_BIT_MASK(32),
+        },
+        .resource       = imx1_camera_resources,
+        .num_resources  = ARRAY_SIZE(imx1_camera_resources),
+};
+static struct resource imx_rtc_resources[] = {
+        {
+                .start  = 0x00204000,
+                .end    = 0x00204024,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .start  = MX1_RTC_INT,
+                .end    = MX1_RTC_INT,
+                .flags  = IORESOURCE_IRQ,
+        }, {
+                .start  = MX1_RTC_SAMINT,
+                .end    = MX1_RTC_SAMINT,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+struct platform_device imx_rtc_device = {
+        .name           = "rtc-imx",
+        .id             = 0,
+        .resource       = imx_rtc_resources,
+        .num_resources  = ARRAY_SIZE(imx_rtc_resources),
+};
+static struct resource imx_wdt_resources[] = {
+        {
+                .start  = 0x00201000,
+                .end    = 0x00201008,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .start  = MX1_WDT_INT,
+                .end    = MX1_WDT_INT,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+struct platform_device imx_wdt_device = {
+        .name           = "imx-wdt",
+        .id             = 0,
+        .resource       = imx_wdt_resources,
+        .num_resources  = ARRAY_SIZE(imx_wdt_resources),
+};
+static struct resource imx_usb_resources[] = {
+        {
+                .start  = 0x00212000,
+                .end    = 0x00212148,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .start  = MX1_USBD_INT0,
+                .end    = MX1_USBD_INT0,
+                .flags  = IORESOURCE_IRQ,
+        }, {
+                .start  = MX1_USBD_INT1,
+                .end    = MX1_USBD_INT1,
+                .flags  = IORESOURCE_IRQ,
+        }, {
+                .start  = MX1_USBD_INT2,
+                .end    = MX1_USBD_INT2,
+                .flags  = IORESOURCE_IRQ,
+        }, {
+                .start  = MX1_USBD_INT3,
+                .end    = MX1_USBD_INT3,
+                .flags  = IORESOURCE_IRQ,
+        }, {
+                .start  = MX1_USBD_INT4,
+                .end    = MX1_USBD_INT4,
+                .flags  = IORESOURCE_IRQ,
+        }, {
+                .start  = MX1_USBD_INT5,
+                .end    = MX1_USBD_INT5,
+                .flags  = IORESOURCE_IRQ,
+        }, {
+                .start  = MX1_USBD_INT6,
+                .end    = MX1_USBD_INT6,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+struct platform_device imx_usb_device = {
+        .name           = "imx_udc",
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(imx_usb_resources),
+        .resource       = imx_usb_resources,
+};
+/* GPIO port description */
+static struct mxc_gpio_port imx_gpio_ports[] = {
+        {
+                .chip.label = "gpio-0",
+                .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR),
+                .irq = MX1_GPIO_INT_PORTA,
+                .virtual_irq_start = MXC_GPIO_IRQ_START,
+        }, {
+                .chip.label = "gpio-1",
+                .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x100),
+                .irq = MX1_GPIO_INT_PORTB,
+                .virtual_irq_start = MXC_GPIO_IRQ_START + 32,
+        }, {
+                .chip.label = "gpio-2",
+                .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x200),
+                .irq = MX1_GPIO_INT_PORTC,
+                .virtual_irq_start = MXC_GPIO_IRQ_START + 64,
+        }, {
+                .chip.label = "gpio-3",
+                .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x300),
+                .irq = MX1_GPIO_INT_PORTD,
+                .virtual_irq_start = MXC_GPIO_IRQ_START + 96,
+        }
+};
+int __init imx1_register_gpios(void)
+{
+        return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
+}
+#endif
+#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27)
 #ifdef CONFIG_MACH_MX27
 static struct resource mx27_camera_resources[] = {
        {
@@ -72,40 +220,6 @@ struct platform_device mx27_camera_device = {
 #endif
 /*
- * SPI master controller
- *
- * - i.MX1: 2 channel (slighly different register setting)
- * - i.MX21: 2 channel
- * - i.MX27: 3 channel
- */
-#define DEFINE_IMX_SPI_DEVICE(n, baseaddr, irq)                                 \
-        static struct resource mxc_spi_resources ## n[] = {                     \
-                {                                                               \
-                        .start = baseaddr,                                      \
-                        .end = baseaddr + SZ_4K - 1,                            \
-                        .flags = IORESOURCE_MEM,                                \
-                }, {                                                            \
-                        .start = irq,                                           \
-                        .end = irq,                                             \
-                        .flags = IORESOURCE_IRQ,                                \
-                },                                                              \
-        };                                                                      \
-                                                                                \
-        struct platform_device mxc_spi_device ## n = {                          \
-                .name = "spi_imx",                                              \
-                .id = n,                                                        \
-                .num_resources = ARRAY_SIZE(mxc_spi_resources ## n),            \
-                .resource = mxc_spi_resources ## n,                             \
-        }
-DEFINE_IMX_SPI_DEVICE(0, MX2x_CSPI1_BASE_ADDR, MX2x_INT_CSPI1);
-DEFINE_IMX_SPI_DEVICE(1, MX2x_CSPI2_BASE_ADDR, MX2x_INT_CSPI2);
-#ifdef CONFIG_MACH_MX27
-DEFINE_IMX_SPI_DEVICE(2, MX27_CSPI3_BASE_ADDR, MX27_INT_CSPI3);
-#endif
-/*
 * General Purpose Timer
 * - i.MX21: 3 timers
 * - i.MX27: 6 timers
@@ -171,34 +285,6 @@ struct platform_device mxc_w1_master_device = {
        .resource = mxc_w1_master_resources,
 };
-#define DEFINE_MXC_NAND_DEVICE(pfx, baseaddr, irq)                      \
-        static struct resource pfx ## _nand_resources[] = {             \
-                {                                                       \
-                        .start = baseaddr,                              \
-                        .end = baseaddr + SZ_4K - 1,                    \
-                        .flags = IORESOURCE_MEM,                        \
-                }, {                                                    \
-                        .start = irq,                                   \
-                        .end = irq,                                     \
-                        .flags = IORESOURCE_IRQ,                        \
-                },                                                      \
-        };                                                              \
-                                                                        \
-        struct platform_device pfx ## _nand_device = {                  \
-                .name = "mxc_nand",                                     \
-                .id = 0,                                                \
-                .num_resources = ARRAY_SIZE(pfx ## _nand_resources),    \
-                .resource = pfx ## _nand_resources,                     \
-        }
-#ifdef CONFIG_MACH_MX21
-DEFINE_MXC_NAND_DEVICE(imx21, MX21_NFC_BASE_ADDR, MX21_INT_NANDFC);
-#endif
-#ifdef CONFIG_MACH_MX27
-DEFINE_MXC_NAND_DEVICE(imx27, MX27_NFC_BASE_ADDR, MX27_INT_NANDFC);
-#endif
 /*
 * lcdc:
 * - i.MX1: the basic controller
@@ -249,32 +335,6 @@ struct platform_device mxc_fec_device = {
 };
 #endif
-#define DEFINE_IMX_I2C_DEVICE(n, baseaddr, irq)                         \
-        static struct resource mxc_i2c_resources ## n[] = {             \
-                {                                                       \
-                        .start = baseaddr,                              \
-                        .end = baseaddr + SZ_4K - 1,                    \
-                        .flags = IORESOURCE_MEM,                        \
-                }, {                                                    \
-                        .start = irq,                                   \
-                        .end = irq,                                     \
-                        .flags = IORESOURCE_IRQ,                        \
-                }                                                       \
-        };                                                              \
-                                                                        \
-        struct platform_device mxc_i2c_device ## n = {                  \
-                .name = "imx-i2c",                                      \
-                .id = n,                                                \
-                .num_resources = ARRAY_SIZE(mxc_i2c_resources ## n),    \
-                .resource = mxc_i2c_resources ## n,                     \
-        }
-DEFINE_IMX_I2C_DEVICE(0, MX2x_I2C_BASE_ADDR, MX2x_INT_I2C);
-#ifdef CONFIG_MACH_MX27
-DEFINE_IMX_I2C_DEVICE(1, MX27_I2C2_BASE_ADDR, MX27_INT_I2C2);
-#endif
 static struct resource mxc_pwm_resources[] = {
        {
                .start = MX2x_PWM_BASE_ADDR,
@@ -485,26 +545,21 @@ DEFINE_IMX_SSI_DEVICE(1, 2, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
 #ifdef CONFIG_MACH_MX21
 DEFINE_MXC_GPIO_PORTS(MX21, imx21);
+int __init imx21_register_gpios(void)
+{
+        return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports));
+}
 #endif
 #ifdef CONFIG_MACH_MX27
 DEFINE_MXC_GPIO_PORTS(MX27, imx27);
-#endif
-int __init mxc_register_gpios(void)
+int __init imx27_register_gpios(void)
 {
-#ifdef CONFIG_MACH_MX21
+        return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports));
-        if (cpu_is_mx21())
-                return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports));
-        else
-#endif
-#ifdef CONFIG_MACH_MX27
-        if (cpu_is_mx27())
-                return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports));
-        else
-#endif
-                return 0;
 }
+#endif
 #ifdef CONFIG_MACH_MX21
 static struct resource mx21_usbhc_resources[] = {
@@ -550,3 +605,5 @@ struct platform_device imx_kpp_device = {
        .num_resources = ARRAY_SIZE(imx_kpp_resources),
        .resource = imx_kpp_resources,
 };
+#endif
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-imx/devices.h
index aefc87a7609e..efd4527506a5 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-imx/devices.h
@@ -1,3 +1,11 @@
+#ifdef CONFIG_ARCH_MX1
+extern struct platform_device imx1_camera_device;
+extern struct platform_device imx_rtc_device;
+extern struct platform_device imx_wdt_device;
+extern struct platform_device imx_usb_device;
+#endif
+#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27)
 extern struct platform_device mxc_gpt1;
 extern struct platform_device mxc_gpt2;
 #ifdef CONFIG_MACH_MX27
@@ -6,26 +14,10 @@ extern struct platform_device mxc_gpt4;
 extern struct platform_device mxc_gpt5;
 #endif
 extern struct platform_device mxc_wdt;
-extern struct platform_device mxc_uart_device0;
-extern struct platform_device mxc_uart_device1;
-extern struct platform_device mxc_uart_device2;
-extern struct platform_device mxc_uart_device3;
-extern struct platform_device mxc_uart_device4;
-extern struct platform_device mxc_uart_device5;
 extern struct platform_device mxc_w1_master_device;
-#ifdef CONFIG_MACH_MX21
-extern struct platform_device imx21_nand_device;
-#endif
-#ifdef CONFIG_MACH_MX27
-extern struct platform_device imx27_nand_device;
-#endif
 extern struct platform_device mxc_fb_device;
 extern struct platform_device mxc_fec_device;
 extern struct platform_device mxc_pwm_device;
-extern struct platform_device mxc_i2c_device0;
-#ifdef CONFIG_MACH_MX27
-extern struct platform_device mxc_i2c_device1;
-#endif
 extern struct platform_device mxc_sdhc_device0;
 extern struct platform_device mxc_sdhc_device1;
 extern struct platform_device mxc_otg_udc_device;
@@ -33,12 +25,8 @@ extern struct platform_device mx27_camera_device;
 extern struct platform_device mxc_otg_host;
 extern struct platform_device mxc_usbh1;
 extern struct platform_device mxc_usbh2;
-extern struct platform_device mxc_spi_device0;
-extern struct platform_device mxc_spi_device1;
-#ifdef CONFIG_MACH_MX27
-extern struct platform_device mxc_spi_device2;
-#endif
 extern struct platform_device mx21_usbhc_device;
 extern struct platform_device imx_ssi_device0;
 extern struct platform_device imx_ssi_device1;
 extern struct platform_device imx_kpp_device;
+#endif
diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/mach-imx/dma-v1.c
index e16014b0d13c..fd1d9197d06e 100644
--- a/arch/arm/plat-mxc/dma-mx1-mx2.c
+++ b/arch/arm/mach-imx/dma-v1.c
@@ -1,5 +1,5 @@
 /*
- *  linux/arch/arm/plat-mxc/dma-mx1-mx2.c
+ *  linux/arch/arm/plat-mxc/dma-v1.c
 *
 *  i.MX DMA registration and IRQ dispatching
 *
@@ -34,7 +34,7 @@
 #include <asm/system.h>
 #include <asm/irq.h>
 #include <mach/hardware.h>
-#include <mach/dma-mx1-mx2.h>
+#include <mach/dma-v1.h>
 #define DMA_DCR     0x00                /* Control Register */
 #define DMA_DISR    0x04                /* Interrupt status Register */
diff --git a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
index d66a6c439583..27e7226ec9d4 100644
--- a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
@@ -35,11 +35,11 @@
 #include <mach/imxfb.h>
 #include <mach/hardware.h>
 #include <mach/mmc.h>
-#include <mach/imx-uart.h>
 #include <mach/spi.h>
 #include <mach/ssi.h>
 #include <mach/audmux.h>
+#include "devices-imx27.h"
 #include "devices.h"
 static int eukrea_mbimx27_pins[] = {
@@ -247,16 +247,8 @@ static struct platform_device eukrea_mbimx27_lcd_powerdev = {
        .dev.platform_data      = &eukrea_mbimx27_lcd_power_data,
 };
-static struct imxuart_platform_data uart_pdata[] = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
-        {
+        .flags = IMXUART_HAVE_RTSCTS,
-                .flags = IMXUART_HAVE_RTSCTS,
-        },
-        {
-                .flags = IMXUART_HAVE_RTSCTS,
-        },
-        {
-                .flags = IMXUART_HAVE_RTSCTS,
-        },
 };
 #if defined(CONFIG_TOUCHSCREEN_ADS7846) \
@@ -305,7 +297,7 @@ static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
 static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28};
-static struct spi_imx_master eukrea_mbimx27_spi_0_data = {
+static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = {
        .chipselect     = eukrea_mbimx27_spi_cs,
        .num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
 };
@@ -353,10 +345,10 @@ void __init eukrea_mbimx27_baseboard_init(void)
        );
 #endif
-        mxc_register_device(&mxc_uart_device1, &uart_pdata[0]);
+        imx27_add_imx_uart1(&uart_pdata);
-        mxc_register_device(&mxc_uart_device2, &uart_pdata[1]);
+        imx27_add_imx_uart2(&uart_pdata);
 #if !defined(MACH_EUKREA_CPUIMX27_USEUART4)
-        mxc_register_device(&mxc_uart_device3, &uart_pdata[2]);
+        imx27_add_imx_uart3(&uart_pdata);
 #endif
        mxc_register_device(&mxc_fb_device, &eukrea_mbimx27_fb_data);
@@ -377,7 +369,7 @@ void __init eukrea_mbimx27_baseboard_init(void)
 #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
        /* SPI_CS0 init */
        mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
-        mxc_register_device(&mxc_spi_device0, &eukrea_mbimx27_spi_0_data);
+        imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data);
        spi_register_board_info(eukrea_mbimx27_spi_board_info,
                        ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
 #endif
diff --git a/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h b/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h
new file mode 100644
index 000000000000..df5f522da6b3
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h
@@ -0,0 +1,10 @@
+#ifndef __MACH_DMA_MX1_MX2_H__
+#define __MACH_DMA_MX1_MX2_H__
+/*
+ * Don't use this header in new code, it will go away when all users are
+ * converted to mach/dma-v1.h
+ */
+#include <mach/dma-v1.h>
+#endif /* ifndef __MACH_DMA_MX1_MX2_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h b/arch/arm/mach-imx/include/mach/dma-v1.h
index 7c4870bd5a21..287431cc13e5 100644
--- a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
+++ b/arch/arm/mach-imx/include/mach/dma-v1.h
@@ -1,5 +1,5 @@
 /*
- *  linux/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
+ *  linux/arch/arm/mach-imx/include/mach/dma-v1.h
 *
 *  i.MX DMA registration and IRQ dispatching
 *
@@ -22,8 +22,10 @@
 * MA 02110-1301, USA.
 */
-#ifndef __ASM_ARCH_MXC_DMA_H
+#ifndef __MACH_DMA_V1_H__
-#define __ASM_ARCH_MXC_DMA_H
+#define __MACH_DMA_V1_H__
+#define imx_has_dma_v1()        (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
 #define IMX_DMA_CHANNELS  16
@@ -102,4 +104,4 @@ enum imx_dma_prio {
 int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio);
-#endif  /* _ASM_ARCH_MXC_DMA_H */
+#endif  /* __MACH_DMA_V1_H__ */
diff --git a/arch/arm/mach-mx2/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index 55291787d5d1..2a135449e52c 100644
--- a/arch/arm/mach-mx2/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -38,13 +38,12 @@
 #include <mach/board-eukrea_cpuimx27.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/i2c.h>
 #include <mach/iomux-mx27.h>
-#include <mach/imx-uart.h>
 #include <mach/mxc_nand.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
+#include "devices-imx27.h"
 #include "devices.h"
 static int eukrea_cpuimx27_pins[] = {
@@ -146,15 +145,12 @@ static struct platform_device eukrea_cpuimx27_nor_mtd_device = {
        .resource = &eukrea_cpuimx27_flash_resource,
 };
-static struct imxuart_platform_data uart_pdata[] = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
-        {
+        .flags = IMXUART_HAVE_RTSCTS,
-                .flags = IMXUART_HAVE_RTSCTS,
-        }, {
-                .flags = IMXUART_HAVE_RTSCTS,
-        },
 };
-static struct mxc_nand_platform_data eukrea_cpuimx27_nand_board_info = {
+static const struct mxc_nand_platform_data
+cpuimx27_nand_board_info __initconst = {
        .width = 1,
        .hw_ecc = 1,
 };
@@ -166,7 +162,7 @@ static struct platform_device *platform_devices[] __initdata = {
        &mxc_w1_master_device,
 };
-static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = {
+static const struct imxi2c_platform_data cpuimx27_i2c1_data __initconst = {
        .bitrate = 100000,
 };
@@ -256,15 +252,14 @@ static void __init eukrea_cpuimx27_init(void)
        mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
                ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
-        mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+        imx27_add_imx_uart0(&uart_pdata);
-        mxc_register_device(&imx27_nand_device,
+        imx27_add_mxc_nand(&cpuimx27_nand_board_info);
-                        &eukrea_cpuimx27_nand_board_info);
        i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
                                ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
-        mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx27_i2c_1_data);
+        imx27_add_i2c_imx1(&cpuimx27_i2c1_data);
        platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
@@ -274,7 +269,7 @@ static void __init eukrea_cpuimx27_init(void)
 #endif
 #if defined(MACH_EUKREA_CPUIMX27_USEUART4)
        /* in which case UART4 is also used for Bluetooth */
-        mxc_register_device(&mxc_uart_device3, &uart_pdata[1]);
+        imx27_add_imx_uart3(&uart_pdata);
 #endif
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
diff --git a/arch/arm/mach-mx2/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
index b5710bf18b96..22a2b5d91213 100644
--- a/arch/arm/mach-mx2/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -12,10 +12,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 #include <linux/platform_device.h>
@@ -26,10 +22,9 @@
 #include <asm/mach/map.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx27.h>
-#include <mach/board-mx27lite.h>
+#include "devices-imx27.h"
 #include "devices.h"
 static unsigned int mx27lite_pins[] = {
@@ -59,7 +54,7 @@ static unsigned int mx27lite_pins[] = {
        PF23_AIN_FEC_TX_EN,
 };
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
        .flags = IMXUART_HAVE_RTSCTS,
 };
@@ -71,7 +66,7 @@ static void __init mx27lite_init(void)
 {
        mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
                "imx27lite");
-        mxc_register_device(&mxc_uart_device0, &uart_pdata);
+        imx27_add_imx_uart0(&uart_pdata);
        platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
diff --git a/arch/arm/mach-mx1/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 51f3cfd83db2..77a760cfadc0 100644
--- a/arch/arm/mach-mx1/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -26,10 +26,10 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/i2c.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx1.h>
 #include <mach/irqs.h>
+#include "devices-imx1.h"
 #include "devices.h"
 static int mx1ads_pins[] = {
@@ -58,12 +58,12 @@ static int mx1ads_pins[] = {
 * UARTs platform data
 */
-static struct imxuart_platform_data uart_pdata[] = {
+static const struct imxuart_platform_data uart0_pdata __initconst = {
-        {
+        .flags = IMXUART_HAVE_RTSCTS,
-                .flags = IMXUART_HAVE_RTSCTS,
+};
-        }, {
+       
-                .flags = IMXUART_HAVE_RTSCTS,
+static const struct imxuart_platform_data uart1_pdata __initconst = {
-        },
+        .flags = IMXUART_HAVE_RTSCTS,
 };
 /*
@@ -75,8 +75,8 @@ static struct physmap_flash_data mx1ads_flash_data = {
 };
 static struct resource flash_resource = {
-        .start  = IMX_CS0_PHYS,
+        .start  = MX1_CS0_PHYS,
-        .end    = IMX_CS0_PHYS + SZ_32M - 1,
+        .end    = MX1_CS0_PHYS + SZ_32M - 1,
        .flags  = IORESOURCE_MEM,
 };
@@ -98,7 +98,7 @@ static struct pcf857x_platform_data pcf857x_data[] = {
        }
 };
-static struct imxi2c_platform_data mx1ads_i2c_data = {
+static const struct imxi2c_platform_data mx1ads_i2c_data __initconst = {
        .bitrate = 100000,
 };
@@ -121,8 +121,8 @@ static void __init mx1ads_init(void)
                ARRAY_SIZE(mx1ads_pins), "mx1ads");
        /* UART */
-        mxc_register_device(&imx_uart1_device, &uart_pdata[0]);
+        imx1_add_imx_uart0(&uart0_pdata);
-        mxc_register_device(&imx_uart2_device, &uart_pdata[1]);
+        imx1_add_imx_uart1(&uart1_pdata);
        /* Physmap flash */
        mxc_register_device(&flash_device, &mx1ads_flash_data);
@@ -131,7 +131,7 @@ static void __init mx1ads_init(void)
        i2c_register_board_info(0, mx1ads_i2c_devices,
                                ARRAY_SIZE(mx1ads_i2c_devices));
-        mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data);
+        imx1_add_i2c_imx(&mx1ads_i2c_data);
 }
 static void __init mx1ads_timer_init(void)
@@ -145,8 +145,8 @@ struct sys_timer mx1ads_timer = {
 MACHINE_START(MX1ADS, "Freescale MX1ADS")
        /* Maintainer: Sascha Hauer, Pengutronix */
-        .phys_io        = IMX_IO_PHYS,
+        .phys_io        = MX1_IO_BASE_ADDR,
-        .io_pg_offst    = (IMX_IO_BASE >> 18) & 0xfffc,
+        .io_pg_offst    = (MX1_IO_BASE_ADDR_VIRT >> 18) & 0xfffc,
        .boot_params    = MX1_PHYS_OFFSET + 0x100,
        .map_io         = mx1_map_io,
        .init_irq       = mx1_init_irq,
@@ -155,8 +155,8 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
 MACHINE_END
 MACHINE_START(MXLADS, "Freescale MXLADS")
-        .phys_io        = IMX_IO_PHYS,
+        .phys_io        = MX1_IO_BASE_ADDR,
-        .io_pg_offst    = (IMX_IO_BASE >> 18) & 0xfffc,
+        .io_pg_offst    = (MX1_IO_BASE_ADDR_VIRT >> 18) & 0xfffc,
        .boot_params    = MX1_PHYS_OFFSET + 0x100,
        .map_io         = mx1_map_io,
        .init_irq       = mx1_init_irq,
diff --git a/arch/arm/mach-mx2/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 113e58d7cb40..96d7f8189f32 100644
--- a/arch/arm/mach-mx2/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -12,10 +12,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 #include <linux/platform_device.h>
@@ -28,15 +24,49 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <mach/imx-uart.h>
 #include <mach/imxfb.h>
 #include <mach/iomux-mx21.h>
 #include <mach/mxc_nand.h>
 #include <mach/mmc.h>
-#include <mach/board-mx21ads.h>
+#include "devices-imx21.h"
 #include "devices.h"
+/*
+ * Memory-mapped I/O on MX21ADS base board
+ */
+#define MX21ADS_MMIO_BASE_ADDR   0xf5000000
+#define MX21ADS_MMIO_SIZE        SZ_16M
+#define MX21ADS_REG_ADDR(offset)    (void __force __iomem *) \
+                (MX21ADS_MMIO_BASE_ADDR + (offset))
+#define MX21ADS_CS8900A_IRQ         IRQ_GPIOE(11)
+#define MX21ADS_CS8900A_IOBASE_REG  MX21ADS_REG_ADDR(0x000000)
+#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
+#define MX21ADS_VERSION_REG         MX21ADS_REG_ADDR(0x400000)
+#define MX21ADS_IO_REG              MX21ADS_REG_ADDR(0x800000)
+/* MX21ADS_IO_REG bit definitions */
+#define MX21ADS_IO_SD_WP        0x0001 /* read */
+#define MX21ADS_IO_TP6          0x0001 /* write */
+#define MX21ADS_IO_SW_SEL       0x0002 /* read */
+#define MX21ADS_IO_TP7          0x0002 /* write */
+#define MX21ADS_IO_RESET_E_UART 0x0004
+#define MX21ADS_IO_RESET_BASE   0x0008
+#define MX21ADS_IO_CSI_CTL2     0x0010
+#define MX21ADS_IO_CSI_CTL1     0x0020
+#define MX21ADS_IO_CSI_CTL0     0x0040
+#define MX21ADS_IO_UART1_EN     0x0080
+#define MX21ADS_IO_UART4_EN     0x0100
+#define MX21ADS_IO_LCDON        0x0200
+#define MX21ADS_IO_IRDA_EN      0x0400
+#define MX21ADS_IO_IRDA_FIR_SEL 0x0800
+#define MX21ADS_IO_IRDA_MD0_B   0x1000
+#define MX21ADS_IO_IRDA_MD1     0x2000
+#define MX21ADS_IO_LED4_ON      0x4000
+#define MX21ADS_IO_LED3_ON      0x8000
 static unsigned int mx21ads_pins[] = {
        /* CS8900A */
@@ -133,14 +163,13 @@ static struct platform_device mx21ads_nor_mtd_device = {
        .resource = &mx21ads_flash_resource,
 };
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata_rts __initconst = {
        .flags = IMXUART_HAVE_RTSCTS,
 };
-static struct imxuart_platform_data uart_norts_pdata = {
+static const struct imxuart_platform_data uart_pdata_norts __initconst = {
 };
 static int mx21ads_fb_init(struct platform_device *pdev)
 {
        u16 tmp;
@@ -227,7 +256,8 @@ static struct imxmmc_platform_data mx21ads_sdhc_pdata = {
        .exit = mx21ads_sdhc_exit,
 };
-static struct mxc_nand_platform_data mx21ads_nand_board_info = {
+static const struct mxc_nand_platform_data
+mx21ads_nand_board_info __initconst = {
        .width = 1,
        .hw_ecc = 1,
 };
@@ -263,12 +293,12 @@ static void __init mx21ads_board_init(void)
        mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins),
                        "mx21ads");
-        mxc_register_device(&mxc_uart_device0, &uart_pdata);
+        imx21_add_imx_uart0(&uart_pdata_rts);
-        mxc_register_device(&mxc_uart_device2, &uart_norts_pdata);
+        imx21_add_imx_uart2(&uart_pdata_norts);
-        mxc_register_device(&mxc_uart_device3, &uart_pdata);
+        imx21_add_imx_uart3(&uart_pdata_rts);
        mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
        mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
-        mxc_register_device(&imx21_nand_device, &mx21ads_nand_board_info);
+        imx21_add_mxc_nand(&mx21ads_nand_board_info);
        platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
diff --git a/arch/arm/mach-mx2/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index b2f4e0db3fb3..e2a82bab012b 100644
--- a/arch/arm/mach-mx2/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -12,10 +12,12 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
+ */
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
+/*
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * This machine is known as:
+ *  - i.MX27 3-Stack Development System
+ *  - i.MX27 Platform Development Kit (i.MX27 PDK)
 */
 #include <linux/platform_device.h>
@@ -25,10 +27,9 @@
 #include <asm/mach/time.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx27.h>
-#include <mach/board-mx27pdk.h>
+#include "devices-imx27.h"
 #include "devices.h"
 static unsigned int mx27pdk_pins[] = {
@@ -58,7 +59,7 @@ static unsigned int mx27pdk_pins[] = {
        PF23_AIN_FEC_TX_EN,
 };
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
        .flags = IMXUART_HAVE_RTSCTS,
 };
@@ -70,7 +71,7 @@ static void __init mx27pdk_init(void)
 {
        mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
                "mx27pdk");
-        mxc_register_device(&mxc_uart_device0, &uart_pdata);
+        imx27_add_imx_uart0(&uart_pdata);
        platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
diff --git a/arch/arm/mach-mx2/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index 6ce323669e58..9c77da98a10e 100644
--- a/arch/arm/mach-mx2/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -12,10 +12,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 #include <linux/platform_device.h>
@@ -32,16 +28,44 @@
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
 #include <mach/gpio.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx27.h>
-#include <mach/board-mx27ads.h>
 #include <mach/mxc_nand.h>
-#include <mach/i2c.h>
 #include <mach/imxfb.h>
 #include <mach/mmc.h>
+#include "devices-imx27.h"
 #include "devices.h"
+/*
+ * Base address of PBC controller, CS4
+ */
+#define PBC_BASE_ADDRESS        0xf4300000
+#define PBC_REG_ADDR(offset)    (void __force __iomem *) \
+                (PBC_BASE_ADDRESS + (offset))
+/* When the PBC address connection is fixed in h/w, defined as 1 */
+#define PBC_ADDR_SH             0
+/* Offsets for the PBC Controller register */
+/*
+ * PBC Board version register offset
+ */
+#define PBC_VERSION_REG         PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 1 set address.
+ */
+#define PBC_BCTRL1_SET_REG      PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 1 clear address.
+ */
+#define PBC_BCTRL1_CLEAR_REG    PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH)
+/* PBC Board Control Register 1 bit definitions */
+#define PBC_BCTRL1_LCDON        0x0800  /* Enable the LCD */
+/* to determine the correct external crystal reference */
+#define CKIH_27MHZ_BIT_SET      (1 << 3)
 static unsigned int mx27ads_pins[] = {
        /* UART0 */
        PE12_PF_UART1_TXD,
@@ -141,7 +165,8 @@ static unsigned int mx27ads_pins[] = {
        PB9_PF_SD2_CLK,
 };
-static struct mxc_nand_platform_data mx27ads_nand_board_info = {
+static const struct mxc_nand_platform_data
+mx27ads_nand_board_info __initconst = {
        .width = 1,
        .hw_ecc = 1,
 };
@@ -168,7 +193,7 @@ static struct platform_device mx27ads_nor_mtd_device = {
        .resource = &mx27ads_flash_resource,
 };
-static struct imxi2c_platform_data mx27ads_i2c_data = {
+static const struct imxi2c_platform_data mx27ads_i2c1_data __initconst = {
        .bitrate = 100000,
 };
@@ -263,20 +288,8 @@ static struct platform_device *platform_devices[] __initdata = {
        &mxc_w1_master_device,
 };
-static struct imxuart_platform_data uart_pdata[] = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
-        {
+        .flags = IMXUART_HAVE_RTSCTS,
-                .flags = IMXUART_HAVE_RTSCTS,
-        }, {
-                .flags = IMXUART_HAVE_RTSCTS,
-        }, {
-                .flags = IMXUART_HAVE_RTSCTS,
-        }, {
-                .flags = IMXUART_HAVE_RTSCTS,
-        }, {
-                .flags = IMXUART_HAVE_RTSCTS,
-        }, {
-                .flags = IMXUART_HAVE_RTSCTS,
-        },
 };
 static void __init mx27ads_board_init(void)
@@ -284,18 +297,18 @@ static void __init mx27ads_board_init(void)
        mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
                        "mx27ads");
-        mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+        imx27_add_imx_uart0(&uart_pdata);
-        mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
+        imx27_add_imx_uart1(&uart_pdata);
-        mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
+        imx27_add_imx_uart2(&uart_pdata);
-        mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
+        imx27_add_imx_uart3(&uart_pdata);
-        mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
+        imx27_add_imx_uart4(&uart_pdata);
-        mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
+        imx27_add_imx_uart5(&uart_pdata);
-        mxc_register_device(&imx27_nand_device, &mx27ads_nand_board_info);
+        imx27_add_mxc_nand(&mx27ads_nand_board_info);
        /* only the i2c master 1 is used on this CPU card */
        i2c_register_board_info(1, mx27ads_i2c_devices,
                                ARRAY_SIZE(mx27ads_i2c_devices));
-        mxc_register_device(&mxc_i2c_device1, &mx27ads_i2c_data);
+        imx27_add_i2c_imx1(&mx27ads_i2c1_data);
        mxc_register_device(&mxc_fb_device, &mx27ads_fb_data);
        mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
        mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata);
@@ -342,4 +355,3 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
        .init_machine   = mx27ads_board_init,
        .timer          = &mx27ads_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index bc3855992677..a3a1e452d4c5 100644
--- a/arch/arm/mach-mx2/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -12,10 +12,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 #include <linux/platform_device.h>
@@ -32,14 +28,13 @@
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
 #include <linux/gpio.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx27.h>
 #include <mach/mxc_nand.h>
-#include <mach/i2c.h>
 #include <linux/i2c/pca953x.h>
 #include <mach/imxfb.h>
 #include <mach/mmc.h>
+#include "devices-imx27.h"
 #include "devices.h"
 static unsigned int mxt_td60_pins[] __initdata = {
@@ -128,12 +123,13 @@ static unsigned int mxt_td60_pins[] __initdata = {
        PB9_PF_SD2_CLK,
 };
-static struct mxc_nand_platform_data mxt_td60_nand_board_info = {
+static const struct mxc_nand_platform_data
+mxt_td60_nand_board_info __initconst = {
        .width = 1,
        .hw_ecc = 1,
 };
-static struct imxi2c_platform_data mxt_td60_i2c_data = {
+static const struct imxi2c_platform_data mxt_td60_i2c0_data __initconst = {
        .bitrate = 100000,
 };
@@ -173,7 +169,7 @@ static struct i2c_board_info mxt_td60_i2c_devices[] = {
        },
 };
-static struct imxi2c_platform_data mxt_td60_i2c2_data = {
+static const struct imxi2c_platform_data mxt_td60_i2c1_data __initconst = {
        .bitrate = 100000,
 };
@@ -239,14 +235,8 @@ static struct platform_device *platform_devices[] __initdata = {
        &mxc_fec_device,
 };
-static struct imxuart_platform_data uart_pdata[] = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
-        {
+        .flags = IMXUART_HAVE_RTSCTS,
-                .flags = IMXUART_HAVE_RTSCTS,
-        }, {
-                .flags = IMXUART_HAVE_RTSCTS,
-        }, {
-                .flags = IMXUART_HAVE_RTSCTS,
-        },
 };
 static void __init mxt_td60_board_init(void)
@@ -254,10 +244,10 @@ static void __init mxt_td60_board_init(void)
        mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins),
                        "MXT_TD60");
-        mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+        imx27_add_imx_uart0(&uart_pdata);
-        mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
+        imx27_add_imx_uart1(&uart_pdata);
-        mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
+        imx27_add_imx_uart2(&uart_pdata);
-        mxc_register_device(&imx27_nand_device, &mxt_td60_nand_board_info);
+        imx27_add_mxc_nand(&mxt_td60_nand_board_info);
        i2c_register_board_info(0, mxt_td60_i2c_devices,
                                ARRAY_SIZE(mxt_td60_i2c_devices));
@@ -265,8 +255,8 @@ static void __init mxt_td60_board_init(void)
        i2c_register_board_info(1, mxt_td60_i2c2_devices,
                                ARRAY_SIZE(mxt_td60_i2c2_devices));
-        mxc_register_device(&mxc_i2c_device0, &mxt_td60_i2c_data);
+        imx27_add_i2c_imx0(&mxt_td60_i2c0_data);
-        mxc_register_device(&mxc_i2c_device1, &mxt_td60_i2c2_data);
+        imx27_add_i2c_imx1(&mxt_td60_i2c1_data);
        mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data);
        mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
diff --git a/arch/arm/mach-mx2/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index 2164b7f96ef2..6c92deaf468f 100644
--- a/arch/arm/mach-mx2/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -36,12 +36,7 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx27.h>
-#include <mach/i2c.h>
 #include <asm/mach/time.h>
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-#include <mach/spi.h>
-#endif
-#include <mach/imx-uart.h>
 #include <mach/audmux.h>
 #include <mach/ssi.h>
 #include <mach/mxc_nand.h>
@@ -51,6 +46,7 @@
 #include <mach/ulpi.h>
 #include <mach/imxfb.h>
+#include "devices-imx27.h"
 #include "devices.h"
 #define OTG_PHY_CS_GPIO (GPIO_PORTB + 23)
@@ -166,11 +162,12 @@ static int pca100_pins[] = {
        GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN, /* GPIO2_IRQ */
 };
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
        .flags = IMXUART_HAVE_RTSCTS,
 };
-static struct mxc_nand_platform_data pca100_nand_board_info = {
+static const struct mxc_nand_platform_data
+pca100_nand_board_info __initconst = {
        .width = 1,
        .hw_ecc = 1,
 };
@@ -181,7 +178,7 @@ static struct platform_device *platform_devices[] __initdata = {
        &mxc_wdt,
 };
-static struct imxi2c_platform_data pca100_i2c_1_data = {
+static const struct imxi2c_platform_data pca100_i2c1_data __initconst = {
        .bitrate = 100000,
 };
@@ -224,7 +221,7 @@ static struct spi_board_info pca100_spi_board_info[] __initdata = {
 static int pca100_spi_cs[] = {SPI1_SS0, SPI1_SS1};
-static struct spi_imx_master pca100_spi_0_data = {
+static const struct spi_imx_master pca100_spi0_data __initconst = {
        .chipselect     = pca100_spi_cs,
        .num_chipselect = ARRAY_SIZE(pca100_spi_cs),
 };
@@ -394,24 +391,24 @@ static void __init pca100_init(void)
        mxc_register_device(&imx_ssi_device0, &pca100_ssi_pdata);
-        mxc_register_device(&mxc_uart_device0, &uart_pdata);
+        imx27_add_imx_uart0(&uart_pdata);
        mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
-        mxc_register_device(&imx27_nand_device, &pca100_nand_board_info);
+        imx27_add_mxc_nand(&pca100_nand_board_info);
        /* only the i2c master 1 is used on this CPU card */
        i2c_register_board_info(1, pca100_i2c_devices,
                                ARRAY_SIZE(pca100_i2c_devices));
-        mxc_register_device(&mxc_i2c_device1, &pca100_i2c_1_data);
+        imx27_add_i2c_imx1(&pca100_i2c1_data);
 #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
        mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN);
        mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN);
        spi_register_board_info(pca100_spi_board_info,
                                ARRAY_SIZE(pca100_spi_board_info));
-        mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data);
+        imx27_add_spi_imx0(&pca100_spi_0_data);
 #endif
        gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
diff --git a/arch/arm/mach-mx2/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 36c89431679a..9212e8f37001 100644
--- a/arch/arm/mach-mx2/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -35,14 +35,12 @@
 #include <mach/board-pcm038.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/i2c.h>
 #include <mach/iomux-mx27.h>
-#include <mach/imx-uart.h>
 #include <mach/mxc_nand.h>
-#include <mach/spi.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
+#include "devices-imx27.h"
 #include "devices.h"
 static int pcm038_pins[] = {
@@ -162,17 +160,12 @@ static struct platform_device pcm038_nor_mtd_device = {
        .resource = &pcm038_flash_resource,
 };
-static struct imxuart_platform_data uart_pdata[] = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
-        {
+        .flags = IMXUART_HAVE_RTSCTS,
-                .flags = IMXUART_HAVE_RTSCTS,
-        }, {
-                .flags = IMXUART_HAVE_RTSCTS,
-        }, {
-                .flags = IMXUART_HAVE_RTSCTS,
-        },
 };
-static struct mxc_nand_platform_data pcm038_nand_board_info = {
+static const struct mxc_nand_platform_data
+pcm038_nand_board_info __initconst = {
        .width = 1,
        .hw_ecc = 1,
 };
@@ -192,7 +185,7 @@ static void __init pcm038_init_sram(void)
        mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00);
 }
-static struct imxi2c_platform_data pcm038_i2c_1_data = {
+static const struct imxi2c_platform_data pcm038_i2c1_data __initconst = {
        .bitrate = 100000,
 };
@@ -215,7 +208,7 @@ static struct i2c_board_info pcm038_i2c_devices[] = {
 static int pcm038_spi_cs[] = {GPIO_PORTD + 28};
-static struct spi_imx_master pcm038_spi_0_data = {
+static const struct spi_imx_master pcm038_spi0_data __initconst = {
        .chipselect = pcm038_spi_cs,
        .num_chipselect = ARRAY_SIZE(pcm038_spi_cs),
 };
@@ -305,18 +298,18 @@ static void __init pcm038_init(void)
        pcm038_init_sram();
-        mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+        imx27_add_imx_uart0(&uart_pdata);
-        mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
+        imx27_add_imx_uart1(&uart_pdata);
-        mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
+        imx27_add_imx_uart2(&uart_pdata);
        mxc_gpio_mode(PE16_AF_OWIRE);
-        mxc_register_device(&imx27_nand_device, &pcm038_nand_board_info);
+        imx27_add_mxc_nand(&pcm038_nand_board_info);
        /* only the i2c master 1 is used on this CPU card */
        i2c_register_board_info(1, pcm038_i2c_devices,
                                ARRAY_SIZE(pcm038_i2c_devices));
-        mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
+        imx27_add_i2c_imx1(&pcm038_i2c1_data);
        /* PE18 for user-LED D40 */
        mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
@@ -326,7 +319,7 @@ static void __init pcm038_init(void)
        /* MC13783 IRQ */
        mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
-        mxc_register_device(&mxc_spi_device0, &pcm038_spi_0_data);
+        imx27_add_spi_imx0(&pcm038_spi0_data);
        spi_register_board_info(pcm038_spi_board_info,
                                ARRAY_SIZE(pcm038_spi_board_info));
diff --git a/arch/arm/mach-mx1/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index 7587a7a12460..88bf0d1e26e6 100644
--- a/arch/arm/mach-mx1/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -22,17 +22,17 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx1.h>
+#include "devices-imx1.h"
 #include "devices.h"
 /*
 * This scb9328 has a 32MiB flash
 */
 static struct resource flash_resource = {
-        .start  = IMX_CS0_PHYS,
+        .start  = MX1_CS0_PHYS,
-        .end    = IMX_CS0_PHYS + (32 * 1024 * 1024) - 1,
+        .end    = MX1_CS0_PHYS + (32 * 1024 * 1024) - 1,
        .flags  = IORESOURCE_MEM,
 };
@@ -70,13 +70,13 @@ static struct dm9000_plat_data dm9000_platdata = {
 static struct resource dm9000x_resources[] = {
        {
                .name   = "address area",
-                .start  = IMX_CS5_PHYS,
+                .start  = MX1_CS5_PHYS,
-                .end    = IMX_CS5_PHYS + 1,
+                .end    = MX1_CS5_PHYS + 1,
                .flags  = IORESOURCE_MEM,       /* address access */
        }, {
                .name   = "data area",
-                .start  = IMX_CS5_PHYS + 4,
+                .start  = MX1_CS5_PHYS + 4,
-                .end    = IMX_CS5_PHYS + 5,
+                .end    = MX1_CS5_PHYS + 5,
                .flags  = IORESOURCE_MEM,       /* data access */
        }, {
                .start  = IRQ_GPIOC(3),
@@ -108,14 +108,13 @@ static int uart1_mxc_init(struct platform_device *pdev)
                        ARRAY_SIZE(mxc_uart1_pins), "UART1");
 }
-static int uart1_mxc_exit(struct platform_device *pdev)
+static void uart1_mxc_exit(struct platform_device *pdev)
 {
        mxc_gpio_release_multiple_pins(mxc_uart1_pins,
                        ARRAY_SIZE(mxc_uart1_pins));
-        return 0;
 }
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
        .init = uart1_mxc_init,
        .exit = uart1_mxc_exit,
        .flags = IMXUART_HAVE_RTSCTS,
@@ -131,7 +130,7 @@ static struct platform_device *devices[] __initdata = {
 */
 static void __init scb9328_init(void)
 {
-        mxc_register_device(&imx_uart1_device, &uart_pdata);
+        imx1_add_imx_uart0(&uart_pdata);
        printk(KERN_INFO"Scb9328: Adding devices\n");
        platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-imx/mm-imx1.c
index 7f9fc1034c08..117ebf6bc951 100644
--- a/arch/arm/mach-mx1/generic.c
+++ b/arch/arm/mach-imx/mm-imx1.c
@@ -3,7 +3,7 @@
 *  Created: april 20th, 2004
 *  Copyright: Synertronixx GmbH
 *
- *  Common code for i.MX machines
+ *  Common code for i.MX1 machines
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@@ -14,11 +14,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
 */
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -31,23 +26,25 @@
 static struct map_desc imx_io_desc[] __initdata = {
        {
-                .virtual        = IMX_IO_BASE,
+                .virtual = MX1_IO_BASE_ADDR_VIRT,
-                .pfn            = __phys_to_pfn(IMX_IO_PHYS),
+                .pfn = __phys_to_pfn(MX1_IO_BASE_ADDR),
-                .length         = IMX_IO_SIZE,
+                .length = MX1_IO_SIZE,
-                .type           = MT_DEVICE
+                .type = MT_DEVICE
        }
 };
 void __init mx1_map_io(void)
 {
        mxc_set_cpu_type(MXC_CPU_MX1);
-        mxc_arch_reset_init(IO_ADDRESS(WDT_BASE_ADDR));
+        mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR));
        iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
 }
+int imx1_register_gpios(void);
 void __init mx1_init_irq(void)
 {
-        mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+        imx1_register_gpios();
+        mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR));
 }
diff --git a/arch/arm/mach-mx2/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c
index 64134314d012..68aa5d2ecdb1 100644
--- a/arch/arm/mach-mx2/mm-imx21.c
+++ b/arch/arm/mach-imx/mm-imx21.c
@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-mx2/mm-imx21.c
+ * arch/arm/mach-imx/mm-imx21.c
 *
 * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
 *
@@ -77,7 +77,10 @@ void __init mx21_map_io(void)
        iotable_init(imx21_io_desc, ARRAY_SIZE(imx21_io_desc));
 }
+int imx21_register_gpios(void);
 void __init mx21_init_irq(void)
 {
+        imx21_register_gpios();
        mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR));
 }
diff --git a/arch/arm/mach-mx2/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
index 3366ed44cfd5..bcedce9c87dd 100644
--- a/arch/arm/mach-mx2/mm-imx27.c
+++ b/arch/arm/mach-imx/mm-imx27.c
@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-mx2/mm-imx27.c
+ * arch/arm/mach-imx/mm-imx27.c
 *
 * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
 *
@@ -77,7 +77,10 @@ void __init mx27_map_io(void)
        iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc));
 }
+int imx27_register_gpios(void);
 void __init mx27_init_irq(void)
 {
+        imx27_register_gpios();
        mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR));
 }
diff --git a/arch/arm/mach-mx1/ksym_mx1.c b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c
index b09ee12a4ff0..b09ee12a4ff0 100644
--- a/arch/arm/mach-mx1/ksym_mx1.c
+++ b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c
diff --git a/arch/arm/mach-mx1/mx1_camera_fiq.S b/arch/arm/mach-imx/mx1-camera-fiq.S
index 9c69aa65bf17..9c69aa65bf17 100644
--- a/arch/arm/mach-mx1/mx1_camera_fiq.S
+++ b/arch/arm/mach-imx/mx1-camera-fiq.S
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c
index f490a406d57e..f490a406d57e 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-imx/pcm970-baseboard.c
diff --git a/arch/arm/mach-mx2/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c
index afc17ce0bb54..afc17ce0bb54 100644
--- a/arch/arm/mach-mx2/pm-imx27.c
+++ b/arch/arm/mach-imx/pm-imx27.c
diff --git a/arch/arm/mach-mx1/Kconfig b/arch/arm/mach-mx1/Kconfig
deleted file mode 100644
index eb7660f5d4b7..000000000000
--- a/arch/arm/mach-mx1/Kconfig
+++ /dev/null
@@ -1,19 +0,0 @@
-if ARCH_MX1
-comment "MX1 platforms:"
-config MACH_MXLADS
-        bool
-config ARCH_MX1ADS
-        bool "MX1ADS platform"
-        select MACH_MXLADS
-        help
-          Say Y here if you are using Motorola MX1ADS/MXLADS boards
-config MACH_SCB9328
-        bool "Synertronixx scb9328"
-        help
-          Say Y here if you are using a Synertronixx scb9328 board
-endif
diff --git a/arch/arm/mach-mx1/Makefile b/arch/arm/mach-mx1/Makefile
deleted file mode 100644
index fc2ddf82441b..000000000000
--- a/arch/arm/mach-mx1/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-# Object file lists.
-EXTRA_CFLAGS += -DIMX_NEEDS_DEPRECATED_SYMBOLS
-obj-y                   += generic.o clock.o devices.o
-# Support for CMOS sensor interface
-obj-$(CONFIG_MX1_VIDEO) += ksym_mx1.o mx1_camera_fiq.o
-# Specific board support
-obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
-obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
diff --git a/arch/arm/mach-mx1/Makefile.boot b/arch/arm/mach-mx1/Makefile.boot
deleted file mode 100644
index 8ed1492288a2..000000000000
--- a/arch/arm/mach-mx1/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-   zreladdr-y   := 0x08008000
-params_phys-y   := 0x08000100
-initrd_phys-y   := 0x08800000
diff --git a/arch/arm/mach-mx1/crm_regs.h b/arch/arm/mach-mx1/crm_regs.h
deleted file mode 100644
index 22e866ff0c09..000000000000
--- a/arch/arm/mach-mx1/crm_regs.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This file may be distributed under the terms of the GNU General
- * Public License, version 2.
- */
-#ifndef __ARCH_ARM_MACH_MX1_CRM_REGS_H__
-#define __ARCH_ARM_MACH_MX1_CRM_REGS_H__
-#define CCM_BASE        IO_ADDRESS(CCM_BASE_ADDR)
-#define SCM_BASE        IO_ADDRESS(SCM_BASE_ADDR)
-/* CCM register addresses */
-#define CCM_CSCR        (CCM_BASE + 0x0)
-#define CCM_MPCTL0      (CCM_BASE + 0x4)
-#define CCM_MPCTL1      (CCM_BASE + 0x8)
-#define CCM_SPCTL0      (CCM_BASE + 0xC)
-#define CCM_SPCTL1      (CCM_BASE + 0x10)
-#define CCM_PCDR        (CCM_BASE + 0x20)
-#define CCM_CSCR_CLKO_OFFSET    29
-#define CCM_CSCR_CLKO_MASK      (0x7 << 29)
-#define CCM_CSCR_USB_OFFSET     26
-#define CCM_CSCR_USB_MASK       (0x7 << 26)
-#define CCM_CSCR_SPLL_RESTART   (1 << 22)
-#define CCM_CSCR_MPLL_RESTART   (1 << 21)
-#define CCM_CSCR_OSC_EN_SHIFT   17
-#define CCM_CSCR_SYSTEM_SEL     (1 << 16)
-#define CCM_CSCR_BCLK_OFFSET    10
-#define CCM_CSCR_BCLK_MASK      (0xF << 10)
-#define CCM_CSCR_PRESC          (1 << 15)
-#define CCM_CSCR_SPEN           (1 << 1)
-#define CCM_CSCR_MPEN           (1 << 0)
-#define CCM_PCDR_PCLK3_OFFSET   16
-#define CCM_PCDR_PCLK3_MASK     (0x7F << 16)
-#define CCM_PCDR_PCLK2_OFFSET   4
-#define CCM_PCDR_PCLK2_MASK     (0xF << 4)
-#define CCM_PCDR_PCLK1_OFFSET   0
-#define CCM_PCDR_PCLK1_MASK     0xF
-/* SCM register addresses */
-#define SCM_SIDR        (SCM_BASE + 0x0)
-#define SCM_FMCR        (SCM_BASE + 0x4)
-#define SCM_GPCR        (SCM_BASE + 0x8)
-#define SCM_GCCR        (SCM_BASE + 0xC)
-#define SCM_GCCR_DMA_CLK_EN_OFFSET      3
-#define SCM_GCCR_CSI_CLK_EN_OFFSET      2
-#define SCM_GCCR_MMA_CLK_EN_OFFSET      1
-#define SCM_GCCR_USBD_CLK_EN_OFFSET     0
-#endif /* __ARCH_ARM_MACH_MX2_CRM_REGS_H__ */
diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c
deleted file mode 100644
index b6be29d1cb08..000000000000
--- a/arch/arm/mach-mx1/devices.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- * Copyright (c) 2008 Darius Augulis <darius.augulis@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include "devices.h"
-static struct resource imx_csi_resources[] = {
-        {
-                .start  = 0x00224000,
-                .end    = 0x00224010,
-                .flags  = IORESOURCE_MEM,
-        }, {
-                .start  = CSI_INT,
-                .end    = CSI_INT,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-static u64 imx_csi_dmamask = 0xffffffffUL;
-struct platform_device imx_csi_device = {
-        .name           = "mx1-camera",
-        .id             = 0, /* This is used to put cameras on this interface */
-        .dev            = {
-                .dma_mask = &imx_csi_dmamask,
-                .coherent_dma_mask = 0xffffffff,
-        },
-        .resource       = imx_csi_resources,
-        .num_resources  = ARRAY_SIZE(imx_csi_resources),
-};
-static struct resource imx_i2c_resources[] = {
-        {
-                .start  = 0x00217000,
-                .end    = 0x00217010,
-                .flags  = IORESOURCE_MEM,
-        }, {
-                .start  = I2C_INT,
-                .end    = I2C_INT,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-struct platform_device imx_i2c_device = {
-        .name           = "imx-i2c",
-        .id             = 0,
-        .resource       = imx_i2c_resources,
-        .num_resources  = ARRAY_SIZE(imx_i2c_resources),
-};
-static struct resource imx_uart1_resources[] = {
-        {
-                .start  = UART1_BASE_ADDR,
-                .end    = UART1_BASE_ADDR + 0xD0,
-                .flags  = IORESOURCE_MEM,
-        }, {
-                .start  = UART1_MINT_RX,
-                .end    = UART1_MINT_RX,
-                .flags  = IORESOURCE_IRQ,
-        }, {
-                .start  = UART1_MINT_TX,
-                .end    = UART1_MINT_TX,
-                .flags  = IORESOURCE_IRQ,
-        }, {
-                .start  = UART1_MINT_RTS,
-                .end    = UART1_MINT_RTS,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-struct platform_device imx_uart1_device = {
-        .name           = "imx-uart",
-        .id             = 0,
-        .num_resources  = ARRAY_SIZE(imx_uart1_resources),
-        .resource       = imx_uart1_resources,
-};
-static struct resource imx_uart2_resources[] = {
-        {
-                .start  = UART2_BASE_ADDR,
-                .end    = UART2_BASE_ADDR + 0xD0,
-                .flags  = IORESOURCE_MEM,
-        }, {
-                .start  = UART2_MINT_RX,
-                .end    = UART2_MINT_RX,
-                .flags  = IORESOURCE_IRQ,
-        }, {
-                .start  = UART2_MINT_TX,
-                .end    = UART2_MINT_TX,
-                .flags  = IORESOURCE_IRQ,
-        }, {
-                .start  = UART2_MINT_RTS,
-                .end    = UART2_MINT_RTS,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-struct platform_device imx_uart2_device = {
-        .name           = "imx-uart",
-        .id             = 1,
-        .num_resources  = ARRAY_SIZE(imx_uart2_resources),
-        .resource       = imx_uart2_resources,
-};
-static struct resource imx_rtc_resources[] = {
-        {
-                .start  = 0x00204000,
-                .end    = 0x00204024,
-                .flags  = IORESOURCE_MEM,
-        }, {
-                .start  = RTC_INT,
-                .end    = RTC_INT,
-                .flags  = IORESOURCE_IRQ,
-        }, {
-                .start  = RTC_SAMINT,
-                .end    = RTC_SAMINT,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-struct platform_device imx_rtc_device = {
-        .name           = "rtc-imx",
-        .id             = 0,
-        .resource       = imx_rtc_resources,
-        .num_resources  = ARRAY_SIZE(imx_rtc_resources),
-};
-static struct resource imx_wdt_resources[] = {
-        {
-                .start  = 0x00201000,
-                .end    = 0x00201008,
-                .flags  = IORESOURCE_MEM,
-        }, {
-                .start  = WDT_INT,
-                .end    = WDT_INT,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-struct platform_device imx_wdt_device = {
-        .name           = "imx-wdt",
-        .id             = 0,
-        .resource       = imx_wdt_resources,
-        .num_resources  = ARRAY_SIZE(imx_wdt_resources),
-};
-static struct resource imx_usb_resources[] = {
-        {
-                .start  = 0x00212000,
-                .end    = 0x00212148,
-                .flags  = IORESOURCE_MEM,
-        }, {
-                .start  = USBD_INT0,
-                .end    = USBD_INT0,
-                .flags  = IORESOURCE_IRQ,
-        }, {
-                .start  = USBD_INT1,
-                .end    = USBD_INT1,
-                .flags  = IORESOURCE_IRQ,
-        }, {
-                .start  = USBD_INT2,
-                .end    = USBD_INT2,
-                .flags  = IORESOURCE_IRQ,
-        }, {
-                .start  = USBD_INT3,
-                .end    = USBD_INT3,
-                .flags  = IORESOURCE_IRQ,
-        }, {
-                .start  = USBD_INT4,
-                .end    = USBD_INT4,
-                .flags  = IORESOURCE_IRQ,
-        }, {
-                .start  = USBD_INT5,
-                .end    = USBD_INT5,
-                .flags  = IORESOURCE_IRQ,
-        }, {
-                .start  = USBD_INT6,
-                .end    = USBD_INT6,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-struct platform_device imx_usb_device = {
-        .name           = "imx_udc",
-        .id             = 0,
-        .num_resources  = ARRAY_SIZE(imx_usb_resources),
-        .resource       = imx_usb_resources,
-};
-/* GPIO port description */
-static struct mxc_gpio_port imx_gpio_ports[] = {
-        {
-                .chip.label = "gpio-0",
-                .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR),
-                .irq = GPIO_INT_PORTA,
-                .virtual_irq_start = MXC_GPIO_IRQ_START,
-        }, {
-                .chip.label = "gpio-1",
-                .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
-                .irq = GPIO_INT_PORTB,
-                .virtual_irq_start = MXC_GPIO_IRQ_START + 32,
-        }, {
-                .chip.label = "gpio-2",
-                .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
-                .irq = GPIO_INT_PORTC,
-                .virtual_irq_start = MXC_GPIO_IRQ_START + 64,
-        }, {
-                .chip.label = "gpio-3",
-                .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
-                .irq = GPIO_INT_PORTD,
-                .virtual_irq_start = MXC_GPIO_IRQ_START + 96,
-        }
-};
-int __init mxc_register_gpios(void)
-{
-        return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
-}
diff --git a/arch/arm/mach-mx1/devices.h b/arch/arm/mach-mx1/devices.h
deleted file mode 100644
index 0da5d7cce3a2..000000000000
--- a/arch/arm/mach-mx1/devices.h
+++ /dev/null
@@ -1,7 +0,0 @@
-extern struct platform_device imx_csi_device;
-extern struct platform_device imx_i2c_device;
-extern struct platform_device imx_uart1_device;
-extern struct platform_device imx_uart2_device;
-extern struct platform_device imx_rtc_device;
-extern struct platform_device imx_wdt_device;
-extern struct platform_device imx_usb_device;
diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c
deleted file mode 100644
index 1c0c835b2252..000000000000
--- a/arch/arm/mach-mx2/serial.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <mach/hardware.h>
-#include <mach/imx-uart.h>
-#include "devices.h"
-static struct resource uart0[] = {
-        {
-                .start = MX2x_UART1_BASE_ADDR,
-                .end = MX2x_UART1_BASE_ADDR + 0x0B5,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = MX2x_INT_UART1,
-                .end = MX2x_INT_UART1,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-struct platform_device mxc_uart_device0 = {
-        .name = "imx-uart",
-        .id = 0,
-        .resource = uart0,
-        .num_resources = ARRAY_SIZE(uart0),
-};
-static struct resource uart1[] = {
-        {
-                .start = MX2x_UART2_BASE_ADDR,
-                .end = MX2x_UART2_BASE_ADDR + 0x0B5,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = MX2x_INT_UART2,
-                .end = MX2x_INT_UART2,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-struct platform_device mxc_uart_device1 = {
-        .name = "imx-uart",
-        .id = 1,
-        .resource = uart1,
-        .num_resources = ARRAY_SIZE(uart1),
-};
-static struct resource uart2[] = {
-        {
-                .start = MX2x_UART3_BASE_ADDR,
-                .end = MX2x_UART3_BASE_ADDR + 0x0B5,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = MX2x_INT_UART3,
-                .end = MX2x_INT_UART3,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-struct platform_device mxc_uart_device2 = {
-        .name = "imx-uart",
-        .id = 2,
-        .resource = uart2,
-        .num_resources = ARRAY_SIZE(uart2),
-};
-static struct resource uart3[] = {
-        {
-                .start = MX2x_UART4_BASE_ADDR,
-                .end = MX2x_UART4_BASE_ADDR + 0x0B5,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = MX2x_INT_UART4,
-                .end = MX2x_INT_UART4,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-struct platform_device mxc_uart_device3 = {
-        .name = "imx-uart",
-        .id = 3,
-        .resource = uart3,
-        .num_resources = ARRAY_SIZE(uart3),
-};
-#ifdef CONFIG_MACH_MX27
-static struct resource uart4[] = {
-        {
-                .start = MX27_UART5_BASE_ADDR,
-                .end = MX27_UART5_BASE_ADDR + 0x0B5,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = MX27_INT_UART5,
-                .end = MX27_INT_UART5,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-struct platform_device mxc_uart_device4 = {
-        .name = "imx-uart",
-        .id = 4,
-        .resource = uart4,
-        .num_resources = ARRAY_SIZE(uart4),
-};
-static struct resource uart5[] = {
-        {
-                .start = MX27_UART6_BASE_ADDR,
-                .end = MX27_UART6_BASE_ADDR + 0x0B5,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = MX27_INT_UART6,
-                .end = MX27_INT_UART6,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-struct platform_device mxc_uart_device5 = {
-        .name = "imx-uart",
-        .id = 5,
-        .resource = uart5,
-        .num_resources = ARRAY_SIZE(uart5),
-};
-#endif
diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig
index 3a6668eebf9a..67e0b54218ae 100644
--- a/arch/arm/mach-mx25/Kconfig
+++ b/arch/arm/mach-mx25/Kconfig
@@ -4,9 +4,14 @@ comment "MX25 platforms:"
 config MACH_MX25_3DS
        bool "Support MX25PDK (3DS) Platform"
+        select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_MXC_NAND
 config MACH_EUKREA_CPUIMX25
        bool "Support Eukrea CPUIMX25 Platform"
+        select IMX_HAVE_PLATFORM_IMX_I2C
+        select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_MXC_NAND
        select MXC_ULPI if USB_ULPI
 choice
diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile
index 83ab5d805104..87ffb9c2f90a 100644
--- a/arch/arm/mach-mx25/Makefile
+++ b/arch/arm/mach-mx25/Makefile
@@ -1,5 +1,5 @@
 obj-y                           := mm.o devices.o
 obj-$(CONFIG_ARCH_MX25)         += clock.o
-obj-$(CONFIG_MACH_MX25_3DS)     += mach-mx25pdk.o
+obj-$(CONFIG_MACH_MX25_3DS)     += mach-mx25_3ds.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX25)              += mach-cpuimx25.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD)     += eukrea_mbimxsd-baseboard.o
diff --git a/arch/arm/mach-mx25/devices-imx25.h b/arch/arm/mach-mx25/devices-imx25.h
new file mode 100644
index 000000000000..2025cb947fcf
--- /dev/null
+++ b/arch/arm/mach-mx25/devices-imx25.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx25.h>
+#include <mach/devices-common.h>
+#define imx25_add_imx_i2c0(pdata)       \
+        imx_add_imx_i2c(0, MX25_I2C1_BASE_ADDR, SZ_16K, MX25_INT_I2C1, pdata)
+#define imx25_add_imx_i2c1(pdata)       \
+        imx_add_imx_i2c(1, MX25_I2C2_BASE_ADDR, SZ_16K, MX25_INT_I2C2, pdata)
+#define imx25_add_imx_i2c2(pdata)       \
+        imx_add_imx_i2c(2, MX25_I2C3_BASE_ADDR, SZ_16K, MX25_INT_I2C3, pdata)
+#define imx25_add_imx_uart0(pdata)      \
+        imx_add_imx_uart_1irq(0, MX25_UART1_BASE_ADDR, SZ_16K, MX25_INT_UART1, pdata)
+#define imx25_add_imx_uart1(pdata)      \
+        imx_add_imx_uart_1irq(1, MX25_UART2_BASE_ADDR, SZ_16K, MX25_INT_UART2, pdata)
+#define imx25_add_imx_uart2(pdata)      \
+        imx_add_imx_uart_1irq(2, MX25_UART3_BASE_ADDR, SZ_16K, MX25_INT_UART3, pdata)
+#define imx25_add_imx_uart3(pdata)      \
+        imx_add_imx_uart_1irq(3, MX25_UART4_BASE_ADDR, SZ_16K, MX25_INT_UART4, pdata)
+#define imx25_add_imx_uart4(pdata)      \
+        imx_add_imx_uart_1irq(4, MX25_UART5_BASE_ADDR, SZ_16K, MX25_INT_UART5, pdata)
+#define imx25_add_mxc_nand(pdata)       \
+        imx_add_mxc_nand_v21(MX25_NFC_BASE_ADDR, MX25_INT_NANDFC, pdata)
+#define imx25_add_spi_imx0(pdata)       \
+        imx_add_spi_imx(0, MX25_CSPI1_BASE_ADDR, SZ_16K, MX25_INT_CSPI1, pdata)
+#define imx25_add_spi_imx1(pdata)       \
+        imx_add_spi_imx(1, MX25_CSPI2_BASE_ADDR, SZ_16K, MX25_INT_CSPI2, pdata)
+#define imx25_add_spi_imx2(pdata)       \
+        imx_add_spi_imx(2, MX25_CSPI3_BASE_ADDR, SZ_16K, MX25_INT_CSPI3, pdata)
diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
index 82d3e53f01f2..3468eb15b236 100644
--- a/arch/arm/mach-mx25/devices.c
+++ b/arch/arm/mach-mx25/devices.c
@@ -22,101 +22,6 @@
 #include <mach/mx25.h>
 #include <mach/irqs.h>
-static struct resource uart0[] = {
-        {
-                .start = 0x43f90000,
-                .end = 0x43f93fff,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = 45,
-                .end = 45,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-struct platform_device mxc_uart_device0 = {
-        .name = "imx-uart",
-        .id = 0,
-        .resource = uart0,
-        .num_resources = ARRAY_SIZE(uart0),
-};
-static struct resource uart1[] = {
-        {
-                .start = 0x43f94000,
-                .end = 0x43f97fff,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = 32,
-                .end = 32,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-struct platform_device mxc_uart_device1 = {
-        .name = "imx-uart",
-        .id = 1,
-        .resource = uart1,
-        .num_resources = ARRAY_SIZE(uart1),
-};
-static struct resource uart2[] = {
-        {
-                .start = 0x5000c000,
-                .end = 0x5000ffff,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = 18,
-                .end = 18,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-struct platform_device mxc_uart_device2 = {
-        .name = "imx-uart",
-        .id = 2,
-        .resource = uart2,
-        .num_resources = ARRAY_SIZE(uart2),
-};
-static struct resource uart3[] = {
-        {
-                .start = 0x50008000,
-                .end = 0x5000bfff,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = 5,
-                .end = 5,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-struct platform_device mxc_uart_device3 = {
-        .name = "imx-uart",
-        .id = 3,
-        .resource = uart3,
-        .num_resources = ARRAY_SIZE(uart3),
-};
-static struct resource uart4[] = {
-        {
-                .start = 0x5002c000,
-                .end = 0x5002ffff,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = 40,
-                .end = 40,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-struct platform_device mxc_uart_device4 = {
-        .name = "imx-uart",
-        .id = 4,
-        .resource = uart4,
-        .num_resources = ARRAY_SIZE(uart4),
-};
 static u64 otg_dmamask = DMA_BIT_MASK(32);
 static struct resource mxc_otg_resources[] = {
@@ -179,63 +84,6 @@ struct platform_device mxc_usbh2 = {
        .num_resources = ARRAY_SIZE(mxc_usbh2_resources),
 };
-static struct resource mxc_spi_resources0[] = {
-        {
-               .start = 0x43fa4000,
-               .end = 0x43fa7fff,
-               .flags = IORESOURCE_MEM,
-        }, {
-               .start = 14,
-               .end = 14,
-               .flags = IORESOURCE_IRQ,
-        },
-};
-struct platform_device mxc_spi_device0 = {
-        .name = "spi_imx",
-        .id = 0,
-        .num_resources = ARRAY_SIZE(mxc_spi_resources0),
-        .resource = mxc_spi_resources0,
-};
-static struct resource mxc_spi_resources1[] = {
-        {
-               .start = 0x50010000,
-               .end = 0x50013fff,
-               .flags = IORESOURCE_MEM,
-        }, {
-               .start = 13,
-               .end = 13,
-               .flags = IORESOURCE_IRQ,
-        },
-};
-struct platform_device mxc_spi_device1 = {
-        .name = "spi_imx",
-        .id = 1,
-        .num_resources = ARRAY_SIZE(mxc_spi_resources1),
-        .resource = mxc_spi_resources1,
-};
-static struct resource mxc_spi_resources2[] = {
-        {
-               .start = 0x50004000,
-               .end = 0x50007fff,
-               .flags = IORESOURCE_MEM,
-        }, {
-               .start = 0,
-               .end = 0,
-               .flags = IORESOURCE_IRQ,
-        },
-};
-struct platform_device mxc_spi_device2 = {
-        .name = "spi_imx",
-        .id = 2,
-        .num_resources = ARRAY_SIZE(mxc_spi_resources2),
-        .resource = mxc_spi_resources2,
-};
 static struct resource mxc_pwm_resources0[] = {
        {
                .start  = 0x53fe0000,
@@ -331,63 +179,6 @@ struct platform_device mxc_pwm_device3 = {
        .resource = mxc_pwm_resources3,
 };
-static struct resource mxc_i2c_1_resources[] = {
-        {
-                .start  = 0x43f80000,
-                .end    = 0x43f83fff,
-                .flags  = IORESOURCE_MEM,
-        }, {
-                .start  = 3,
-                .end    = 3,
-                .flags  = IORESOURCE_IRQ,
-        }
-};
-struct platform_device mxc_i2c_device0 = {
-        .name = "imx-i2c",
-        .id = 0,
-        .num_resources = ARRAY_SIZE(mxc_i2c_1_resources),
-        .resource = mxc_i2c_1_resources,
-};
-static struct resource mxc_i2c_2_resources[] = {
-        {
-                .start  = 0x43f98000,
-                .end    = 0x43f9bfff,
-                .flags  = IORESOURCE_MEM,
-        }, {
-                .start  = 4,
-                .end    = 4,
-                .flags  = IORESOURCE_IRQ,
-        }
-};
-struct platform_device mxc_i2c_device1 = {
-        .name = "imx-i2c",
-        .id = 1,
-        .num_resources = ARRAY_SIZE(mxc_i2c_2_resources),
-        .resource = mxc_i2c_2_resources,
-};
-static struct resource mxc_i2c_3_resources[] = {
-        {
-                .start  = 0x43f84000,
-                .end    = 0x43f87fff,
-                .flags  = IORESOURCE_MEM,
-        }, {
-                .start  = 10,
-                .end    = 10,
-                .flags  = IORESOURCE_IRQ,
-        }
-};
-struct platform_device mxc_i2c_device2 = {
-        .name = "imx-i2c",
-        .id = 2,
-        .num_resources = ARRAY_SIZE(mxc_i2c_3_resources),
-        .resource = mxc_i2c_3_resources,
-};
 static struct mxc_gpio_port imx_gpio_ports[] = {
        {
                .chip.label = "gpio-0",
@@ -412,7 +203,7 @@ static struct mxc_gpio_port imx_gpio_ports[] = {
        }
 };
-int __init mxc_register_gpios(void)
+int __init imx25_register_gpios(void)
 {
        return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
 }
@@ -437,26 +228,6 @@ struct platform_device mx25_fec_device = {
        .resource       = mx25_fec_resources,
 };
-static struct resource mxc_nand_resources[] = {
-        {
-                .start  = MX25_NFC_BASE_ADDR,
-                .end    = MX25_NFC_BASE_ADDR + 0x1fff,
-                .flags  = IORESOURCE_MEM,
-        },
-        {
-                .start  = MX25_INT_NANDFC,
-                .end    = MX25_INT_NANDFC,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-struct platform_device mxc_nand_device = {
-        .name           = "mxc_nand",
-        .id             = 0,
-        .num_resources  = ARRAY_SIZE(mxc_nand_resources),
-        .resource       = mxc_nand_resources,
-};
 static struct resource mx25_rtc_resources[] = {
        {
                .start  = MX25_DRYICE_BASE_ADDR,
diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h
index 00e29f57a596..4aceb68e35a7 100644
--- a/arch/arm/mach-mx25/devices.h
+++ b/arch/arm/mach-mx25/devices.h
@@ -1,24 +1,12 @@
-extern struct platform_device mxc_uart_device0;
-extern struct platform_device mxc_uart_device1;
-extern struct platform_device mxc_uart_device2;
-extern struct platform_device mxc_uart_device3;
-extern struct platform_device mxc_uart_device4;
 extern struct platform_device mxc_otg;
 extern struct platform_device otg_udc_device;
 extern struct platform_device mxc_usbh2;
-extern struct platform_device mxc_spi_device0;
-extern struct platform_device mxc_spi_device1;
-extern struct platform_device mxc_spi_device2;
 extern struct platform_device mxc_pwm_device0;
 extern struct platform_device mxc_pwm_device1;
 extern struct platform_device mxc_pwm_device2;
 extern struct platform_device mxc_pwm_device3;
 extern struct platform_device mxc_keypad_device;
-extern struct platform_device mxc_i2c_device0;
-extern struct platform_device mxc_i2c_device1;
-extern struct platform_device mxc_i2c_device2;
 extern struct platform_device mx25_fec_device;
-extern struct platform_device mxc_nand_device;
 extern struct platform_device mx25_rtc_device;
 extern struct platform_device mx25_fb_device;
 extern struct platform_device mxc_wdt;
diff --git a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
index e0f0dfda4d01..f07b1f95ac76 100644
--- a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
@@ -38,6 +38,7 @@
 #include <mach/ssi.h>
 #include <mach/audmux.h>
+#include "devices-imx25.h"
 #include "devices.h"
 static struct pad_desc eukrea_mbimxsd_pads[] = {
@@ -195,7 +196,7 @@ static struct platform_device *platform_devices[] __initdata = {
        &eukrea_mbimxsd_lcd_powerdev,
 };
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
        .flags = IMXUART_HAVE_RTSCTS,
 };
@@ -237,7 +238,7 @@ void __init eukrea_mbimxsd_baseboard_init(void)
        );
 #endif
-        mxc_register_device(&mxc_uart_device1, &uart_pdata);
+        imx25_add_imx_uart1(&uart_pdata);
        mxc_register_device(&mx25_fb_device, &eukrea_mximxsd_fb_pdata);
        mxc_register_device(&imx_ssi_device0, &eukrea_mbimxsd_ssi_pdata);
diff --git a/arch/arm/mach-mx25/mach-cpuimx25.c b/arch/arm/mach-mx25/mach-cpuimx25.c
index 4796484830a0..d39f9ccd4be0 100644
--- a/arch/arm/mach-mx25/mach-cpuimx25.c
+++ b/arch/arm/mach-mx25/mach-cpuimx25.c
@@ -37,18 +37,17 @@
 #include <asm/memory.h>
 #include <asm/mach/map.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
-#include <mach/i2c.h>
 #include <mach/mx25.h>
 #include <mach/mxc_nand.h>
 #include <mach/imxfb.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
+#include <mach/iomux-mx25.h>
+#include "devices-imx25.h"
 #include "devices.h"
-#include <mach/iomux-mx25.h>
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
        .flags = IMXUART_HAVE_RTSCTS,
 };
@@ -72,13 +71,15 @@ static struct fec_platform_data mx25_fec_pdata = {
        .phy    = PHY_INTERFACE_MODE_RMII,
 };
-static struct mxc_nand_platform_data eukrea_cpuimx25_nand_board_info = {
+static const struct mxc_nand_platform_data
+eukrea_cpuimx25_nand_board_info __initconst = {
        .width          = 1,
        .hw_ecc         = 1,
        .flash_bbt      = 1,
 };
-static struct imxi2c_platform_data eukrea_cpuimx25_i2c_1_data = {
+static const struct imxi2c_platform_data
+eukrea_cpuimx25_i2c0_data __initconst = {
        .bitrate = 100000,
 };
@@ -125,14 +126,14 @@ static void __init eukrea_cpuimx25_init(void)
                        ARRAY_SIZE(eukrea_cpuimx25_pads)))
                printk(KERN_ERR "error setting cpuimx25 pads !\n");
-        mxc_register_device(&mxc_uart_device0, &uart_pdata);
+        imx25_add_imx_uart0(&uart_pdata);
-        mxc_register_device(&mxc_nand_device, &eukrea_cpuimx25_nand_board_info);
+        imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info);
        mxc_register_device(&mx25_rtc_device, NULL);
        mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
        i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices,
                                ARRAY_SIZE(eukrea_cpuimx25_i2c_devices));
-        mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx25_i2c_1_data);
+        imx25_add_imx_i2c0(&eukrea_cpuimx25_i2c0_data);
 #if defined(CONFIG_USB_ULPI)
        if (otg_mode_host) {
diff --git a/arch/arm/mach-mx25/mach-mx25pdk.c b/arch/arm/mach-mx25/mach-mx25_3ds.c
index ba3fbef1c41f..62bc21f11a71 100644
--- a/arch/arm/mach-mx25/mach-mx25pdk.c
+++ b/arch/arm/mach-mx25/mach-mx25_3ds.c
@@ -16,6 +16,12 @@
 * Boston, MA  02110-1301, USA.
 */
+/*
+ * This machine is known as:
+ *  - i.MX25 3-Stack Development System
+ *  - i.MX25 Platform Development Kit (i.MX25 PDK)
+ */
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/delay.h>
@@ -33,14 +39,14 @@
 #include <asm/memory.h>
 #include <asm/mach/map.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/mx25.h>
-#include <mach/mxc_nand.h>
 #include <mach/imxfb.h>
-#include "devices.h"
 #include <mach/iomux-mx25.h>
-static struct imxuart_platform_data uart_pdata = {
+#include "devices-imx25.h"
+#include "devices.h"
+static const struct imxuart_platform_data uart_pdata __initconst = {
        .flags = IMXUART_HAVE_RTSCTS,
 };
@@ -114,7 +120,8 @@ static void __init mx25pdk_fec_reset(void)
        gpio_set_value(FEC_RESET_B_GPIO, 1);
 }
-static struct mxc_nand_platform_data mx25pdk_nand_board_info = {
+static const struct mxc_nand_platform_data
+mx25pdk_nand_board_info __initconst = {
        .width          = 1,
        .hw_ecc         = 1,
        .flash_bbt      = 1,
@@ -177,9 +184,9 @@ static void __init mx25pdk_init(void)
        mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
                        ARRAY_SIZE(mx25pdk_pads));
-        mxc_register_device(&mxc_uart_device0, &uart_pdata);
+        imx25_add_imx_uart0(&uart_pdata);
        mxc_register_device(&mxc_usbh2, NULL);
-        mxc_register_device(&mxc_nand_device, &mx25pdk_nand_board_info);
+        imx25_add_mxc_nand(&mx25pdk_nand_board_info);
        mxc_register_device(&mx25_rtc_device, NULL);
        mxc_register_device(&mx25_fb_device, &mx25pdk_fb_pdata);
        mxc_register_device(&mxc_wdt, NULL);
diff --git a/arch/arm/mach-mx25/mm.c b/arch/arm/mach-mx25/mm.c
index a7e587ff3e9e..593e14545f5a 100644
--- a/arch/arm/mach-mx25/mm.c
+++ b/arch/arm/mach-mx25/mm.c
@@ -14,10 +14,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 #include <linux/mm.h>
@@ -69,8 +65,11 @@ void __init mx25_map_io(void)
        iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
+int imx25_register_gpios(void);
 void __init mx25_init_irq(void)
 {
+        imx25_register_gpios();
        mxc_init_irq((void __iomem *)MX25_AVIC_BASE_ADDR_VIRT);
 }
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index b09e9a94adf1..a11112afde5e 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -15,6 +15,8 @@ comment "MX3 platforms:"
 config MACH_MX31ADS
        bool "Support MX31ADS platforms"
        select ARCH_MX31
+        select IMX_HAVE_PLATFORM_IMX_I2C
+        select IMX_HAVE_PLATFORM_IMX_UART
        default y
        help
          Include support for MX31ADS platform. This includes specific
@@ -34,6 +36,9 @@ config MACH_MX31ADS_WM1133_EV1
 config MACH_PCM037
        bool "Support Phytec pcm037 (i.MX31) platforms"
        select ARCH_MX31
+        select IMX_HAVE_PLATFORM_IMX_I2C
+        select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_MXC_NAND
        select MXC_ULPI if USB_ULPI
        help
          Include support for Phytec pcm037 platform. This includes
@@ -42,6 +47,7 @@ config MACH_PCM037
 config MACH_PCM037_EET
        bool "Support pcm037 EET board extensions"
        depends on MACH_PCM037
+        select IMX_HAVE_PLATFORM_SPI_IMX
        help
          Add support for PCM037 EET baseboard extensions. If you are using the
          OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
@@ -51,6 +57,9 @@ config MACH_MX31LITE
        bool "Support MX31 LITEKIT (LogicPD)"
        select ARCH_MX31
        select MXC_ULPI if USB_ULPI
+        select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_MXC_NAND
+        select IMX_HAVE_PLATFORM_SPI_IMX
        help
          Include support for MX31 LITEKIT platform. This includes specific
          configurations for the board and its peripherals.
@@ -58,6 +67,9 @@ config MACH_MX31LITE
 config MACH_MX31_3DS
        bool "Support MX31PDK (3DS)"
        select ARCH_MX31
+        select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_MXC_NAND
+        select IMX_HAVE_PLATFORM_SPI_IMX
        help
          Include support for MX31PDK (3DS) platform. This includes specific
          configurations for the board and its peripherals.
@@ -74,6 +86,9 @@ config MACH_MX31_3DS_MXC_NAND_USE_BBT
 config MACH_MX31MOBOARD
        bool "Support mx31moboard platforms (EPFL Mobots group)"
        select ARCH_MX31
+        select IMX_HAVE_PLATFORM_IMX_I2C
+        select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_SPI_IMX
        select MXC_ULPI if USB_ULPI
        help
          Include support for mx31moboard platform. This includes specific
@@ -82,6 +97,8 @@ config MACH_MX31MOBOARD
 config MACH_MX31LILLY
        bool "Support MX31 LILLY-1131 platforms (INCO startec)"
        select ARCH_MX31
+        select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_SPI_IMX
        select MXC_ULPI if USB_ULPI
        help
          Include support for mx31 based LILLY1131 modules. This includes
@@ -90,6 +107,7 @@ config MACH_MX31LILLY
 config MACH_QONG
        bool "Support Dave/DENX QongEVB-LITE platform"
        select ARCH_MX31
+        select IMX_HAVE_PLATFORM_IMX_UART
        help
          Include support for Dave/DENX QongEVB-LITE platform. This includes
          specific configurations for the board and its peripherals.
@@ -97,6 +115,9 @@ config MACH_QONG
 config MACH_PCM043
        bool "Support Phytec pcm043 (i.MX35) platforms"
        select ARCH_MX35
+        select IMX_HAVE_PLATFORM_IMX_I2C
+        select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_MXC_NAND
        select MXC_ULPI if USB_ULPI
        help
          Include support for Phytec pcm043 platform. This includes
@@ -105,6 +126,9 @@ config MACH_PCM043
 config MACH_ARMADILLO5X0
        bool "Support Atmark Armadillo-500 Development Base Board"
        select ARCH_MX31
+        select IMX_HAVE_PLATFORM_IMX_I2C
+        select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_MXC_NAND
        select MXC_ULPI if USB_ULPI
        help
          Include support for Atmark Armadillo-500 platform. This includes
@@ -113,6 +137,7 @@ config MACH_ARMADILLO5X0
 config MACH_MX35_3DS
        bool "Support MX35PDK platform"
        select ARCH_MX35
+        select IMX_HAVE_PLATFORM_IMX_UART
        default n
        help
          Include support for MX35PDK platform. This includes specific
@@ -121,6 +146,7 @@ config MACH_MX35_3DS
 config MACH_KZM_ARM11_01
        bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
        select ARCH_MX31
+        select IMX_HAVE_PLATFORM_IMX_UART
        help
          Include support for KZM-ARM11-01. This includes specific
          configurations for the board and its peripherals.
@@ -128,6 +154,9 @@ config MACH_KZM_ARM11_01
 config MACH_EUKREA_CPUIMX35
        bool "Support Eukrea CPUIMX35 Platform"
        select ARCH_MX35
+        select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_IMX_I2C
+        select IMX_HAVE_PLATFORM_MXC_NAND
        select MXC_ULPI if USB_ULPI
        help
          Include support for Eukrea CPUIMX35 platform. This includes
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index ef68ff55a7b6..54bc935acdc6 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -22,7 +22,7 @@ obj-$(CONFIG_MACH_MX31MOBOARD)	+= mach-mx31moboard.o mx31moboard-devboard.o \
 obj-$(CONFIG_MACH_QONG)         += mach-qong.o
 obj-$(CONFIG_MACH_PCM043)       += mach-pcm043.o
 obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
-obj-$(CONFIG_MACH_MX35_3DS)     += mach-mx35pdk.o
+obj-$(CONFIG_MACH_MX35_3DS)     += mach-mx35_3ds.o
 obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX35)      += mach-cpuimx35.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD)     += eukrea_mbimxsd-baseboard.o
diff --git a/arch/arm/mach-mx3/devices-imx31.h b/arch/arm/mach-mx3/devices-imx31.h
new file mode 100644
index 000000000000..3b1a44a20585
--- /dev/null
+++ b/arch/arm/mach-mx3/devices-imx31.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx31.h>
+#include <mach/devices-common.h>
+#define imx31_add_imx_i2c0(pdata)       \
+        imx_add_imx_i2c(0, MX31_I2C1_BASE_ADDR, SZ_4K, MX31_INT_I2C1, pdata)
+#define imx31_add_imx_i2c1(pdata)       \
+        imx_add_imx_i2c(1, MX31_I2C2_BASE_ADDR, SZ_4K, MX31_INT_I2C2, pdata)
+#define imx31_add_imx_i2c2(pdata)       \
+        imx_add_imx_i2c(2, MX31_I2C3_BASE_ADDR, SZ_4K, MX31_INT_I2C3, pdata)
+#define imx31_add_imx_uart0(pdata)      \
+        imx_add_imx_uart_1irq(0, MX31_UART1_BASE_ADDR, SZ_16K, MX31_INT_UART1, pdata)
+#define imx31_add_imx_uart1(pdata)      \
+        imx_add_imx_uart_1irq(1, MX31_UART2_BASE_ADDR, SZ_16K, MX31_INT_UART2, pdata)
+#define imx31_add_imx_uart2(pdata)      \
+        imx_add_imx_uart_1irq(2, MX31_UART3_BASE_ADDR, SZ_16K, MX31_INT_UART3, pdata)
+#define imx31_add_imx_uart3(pdata)      \
+        imx_add_imx_uart_1irq(3, MX31_UART4_BASE_ADDR, SZ_16K, MX31_INT_UART4, pdata)
+#define imx31_add_imx_uart4(pdata)      \
+        imx_add_imx_uart_1irq(4, MX31_UART5_BASE_ADDR, SZ_16K, MX31_INT_UART5, pdata)
+#define imx31_add_mxc_nand(pdata)       \
+        imx_add_mxc_nand_v1(MX31_NFC_BASE_ADDR, MX31_INT_NANDFC, pdata)
+#define imx31_add_spi_imx0(pdata)       \
+        imx_add_spi_imx(0, MX31_CSPI1_BASE_ADDR, SZ_4K, MX31_INT_CSPI1, pdata)
+#define imx31_add_spi_imx1(pdata)       \
+        imx_add_spi_imx(1, MX31_CSPI2_BASE_ADDR, SZ_4K, MX31_INT_CSPI2, pdata)
+#define imx31_add_spi_imx2(pdata)       \
+        imx_add_spi_imx(2, MX31_CSPI3_BASE_ADDR, SZ_4K, MX31_INT_CSPI3, pdata)
diff --git a/arch/arm/mach-mx3/devices-imx35.h b/arch/arm/mach-mx3/devices-imx35.h
new file mode 100644
index 000000000000..536d9b9a250b
--- /dev/null
+++ b/arch/arm/mach-mx3/devices-imx35.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx35.h>
+#include <mach/devices-common.h>
+#define imx35_add_imx_i2c0(pdata)       \
+        imx_add_imx_i2c(0, MX35_I2C1_BASE_ADDR, SZ_4K, MX35_INT_I2C1, pdata)
+#define imx35_add_imx_i2c1(pdata)       \
+        imx_add_imx_i2c(1, MX35_I2C2_BASE_ADDR, SZ_4K, MX35_INT_I2C2, pdata)
+#define imx35_add_imx_i2c2(pdata)       \
+        imx_add_imx_i2c(2, MX35_I2C3_BASE_ADDR, SZ_4K, MX35_INT_I2C3, pdata)
+#define imx35_add_imx_uart0(pdata)      \
+        imx_add_imx_uart_1irq(0, MX35_UART1_BASE_ADDR, SZ_16K, MX35_INT_UART1, pdata)
+#define imx35_add_imx_uart1(pdata)      \
+        imx_add_imx_uart_1irq(1, MX35_UART2_BASE_ADDR, SZ_16K, MX35_INT_UART2, pdata)
+#define imx35_add_imx_uart2(pdata)      \
+        imx_add_imx_uart_1irq(2, MX35_UART3_BASE_ADDR, SZ_16K, MX35_INT_UART3, pdata)
+#define imx35_add_mxc_nand(pdata)       \
+        imx_add_mxc_nand_v21(MX35_NFC_BASE_ADDR, MX35_INT_NANDFC, pdata)
+#define imx35_add_spi_imx0(pdata)       \
+        imx_add_spi_imx(0, MX35_CSPI1_BASE_ADDR, SZ_4K, MX35_INT_CSPI1, pdata)
+#define imx35_add_spi_imx1(pdata)       \
+        imx_add_spi_imx(1, MX35_CSPI2_BASE_ADDR, SZ_4K, MX35_INT_CSPI2, pdata)
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index db7acd6e9101..a4fd1a26fc91 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -25,108 +25,10 @@
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/mx3_camera.h>
 #include "devices.h"
-static struct resource uart0[] = {
-        {
-                .start = UART1_BASE_ADDR,
-                .end = UART1_BASE_ADDR + 0x0B5,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = MXC_INT_UART1,
-                .end = MXC_INT_UART1,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-struct platform_device mxc_uart_device0 = {
-        .name = "imx-uart",
-        .id = 0,
-        .resource = uart0,
-        .num_resources = ARRAY_SIZE(uart0),
-};
-static struct resource uart1[] = {
-        {
-                .start = UART2_BASE_ADDR,
-                .end = UART2_BASE_ADDR + 0x0B5,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = MXC_INT_UART2,
-                .end = MXC_INT_UART2,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-struct platform_device mxc_uart_device1 = {
-        .name = "imx-uart",
-        .id = 1,
-        .resource = uart1,
-        .num_resources = ARRAY_SIZE(uart1),
-};
-static struct resource uart2[] = {
-        {
-                .start = UART3_BASE_ADDR,
-                .end = UART3_BASE_ADDR + 0x0B5,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = MXC_INT_UART3,
-                .end = MXC_INT_UART3,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-struct platform_device mxc_uart_device2 = {
-        .name = "imx-uart",
-        .id = 2,
-        .resource = uart2,
-        .num_resources = ARRAY_SIZE(uart2),
-};
-#ifdef CONFIG_ARCH_MX31
-static struct resource uart3[] = {
-        {
-                .start = UART4_BASE_ADDR,
-                .end = UART4_BASE_ADDR + 0x0B5,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = MXC_INT_UART4,
-                .end = MXC_INT_UART4,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-struct platform_device mxc_uart_device3 = {
-        .name = "imx-uart",
-        .id = 3,
-        .resource = uart3,
-        .num_resources = ARRAY_SIZE(uart3),
-};
-static struct resource uart4[] = {
-        {
-                .start = UART5_BASE_ADDR,
-                .end = UART5_BASE_ADDR + 0x0B5,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = MXC_INT_UART5,
-                .end = MXC_INT_UART5,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-struct platform_device mxc_uart_device4 = {
-        .name = "imx-uart",
-        .id = 4,
-        .resource = uart4,
-        .num_resources = ARRAY_SIZE(uart4),
-};
-#endif /* CONFIG_ARCH_MX31 */
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
        {
@@ -147,7 +49,7 @@ static struct mxc_gpio_port imx_gpio_ports[] = {
        }
 };
-int __init mxc_register_gpios(void)
+int __init imx3x_register_gpios(void)
 {
        return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
 }
@@ -167,82 +69,6 @@ struct platform_device mxc_w1_master_device = {
        .resource = mxc_w1_master_resources,
 };
-static struct resource mxc_nand_resources[] = {
-        {
-                .start  = 0, /* runtime dependent */
-                .end    = 0,
-                .flags  = IORESOURCE_MEM,
-        }, {
-                .start  = MXC_INT_NANDFC,
-                .end    = MXC_INT_NANDFC,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-struct platform_device mxc_nand_device = {
-        .name = "mxc_nand",
-        .id = 0,
-        .num_resources = ARRAY_SIZE(mxc_nand_resources),
-        .resource = mxc_nand_resources,
-};
-static struct resource mxc_i2c0_resources[] = {
-        {
-                .start = I2C_BASE_ADDR,
-                .end = I2C_BASE_ADDR + SZ_4K - 1,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = MXC_INT_I2C,
-                .end = MXC_INT_I2C,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-struct platform_device mxc_i2c_device0 = {
-        .name = "imx-i2c",
-        .id = 0,
-        .num_resources = ARRAY_SIZE(mxc_i2c0_resources),
-        .resource = mxc_i2c0_resources,
-};
-static struct resource mxc_i2c1_resources[] = {
-        {
-                .start = I2C2_BASE_ADDR,
-                .end = I2C2_BASE_ADDR + SZ_4K - 1,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = MXC_INT_I2C2,
-                .end = MXC_INT_I2C2,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-struct platform_device mxc_i2c_device1 = {
-        .name = "imx-i2c",
-        .id = 1,
-        .num_resources = ARRAY_SIZE(mxc_i2c1_resources),
-        .resource = mxc_i2c1_resources,
-};
-static struct resource mxc_i2c2_resources[] = {
-        {
-                .start = I2C3_BASE_ADDR,
-                .end = I2C3_BASE_ADDR + SZ_4K - 1,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = MXC_INT_I2C3,
-                .end = MXC_INT_I2C3,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-struct platform_device mxc_i2c_device2 = {
-        .name = "imx-i2c",
-        .id = 2,
-        .num_resources = ARRAY_SIZE(mxc_i2c2_resources),
-        .resource = mxc_i2c2_resources,
-};
 #ifdef CONFIG_ARCH_MX31
 static struct resource mxcsdhc0_resources[] = {
        {
@@ -455,68 +281,7 @@ struct platform_device mxc_usbh2 = {
        .num_resources = ARRAY_SIZE(mxc_usbh2_resources),
 };
-/*
+#if defined(CONFIG_ARCH_MX35)
- * SPI master controller
- * 3 channels
- */
-static struct resource mxc_spi_0_resources[] = {
-        {
-               .start = CSPI1_BASE_ADDR,
-               .end = CSPI1_BASE_ADDR + SZ_4K - 1,
-               .flags = IORESOURCE_MEM,
-        }, {
-               .start = MXC_INT_CSPI1,
-               .end = MXC_INT_CSPI1,
-               .flags = IORESOURCE_IRQ,
-        },
-};
-static struct resource mxc_spi_1_resources[] = {
-        {
-                .start = CSPI2_BASE_ADDR,
-                .end = CSPI2_BASE_ADDR + SZ_4K - 1,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = MXC_INT_CSPI2,
-                .end = MXC_INT_CSPI2,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-static struct resource mxc_spi_2_resources[] = {
-        {
-                .start = CSPI3_BASE_ADDR,
-                .end = CSPI3_BASE_ADDR + SZ_4K - 1,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = MXC_INT_CSPI3,
-                .end = MXC_INT_CSPI3,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-struct platform_device mxc_spi_device0 = {
-        .name = "spi_imx",
-        .id = 0,
-        .num_resources = ARRAY_SIZE(mxc_spi_0_resources),
-        .resource = mxc_spi_0_resources,
-};
-struct platform_device mxc_spi_device1 = {
-        .name = "spi_imx",
-        .id = 1,
-        .num_resources = ARRAY_SIZE(mxc_spi_1_resources),
-        .resource = mxc_spi_1_resources,
-};
-struct platform_device mxc_spi_device2 = {
-        .name = "spi_imx",
-        .id = 2,
-        .num_resources = ARRAY_SIZE(mxc_spi_2_resources),
-        .resource = mxc_spi_2_resources,
-};
-#ifdef CONFIG_ARCH_MX35
 static struct resource mxc_fec_resources[] = {
        {
                .start  = MXC_FEC_BASE_ADDR,
@@ -628,16 +393,15 @@ struct platform_device imx_kpp_device = {
 static int __init mx3_devices_init(void)
 {
+#if defined(CONFIG_ARCH_MX31)
        if (cpu_is_mx31()) {
-                mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR;
-                mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff;
                imx_wdt_resources[0].start = MX31_WDOG_BASE_ADDR;
                imx_wdt_resources[0].end = MX31_WDOG_BASE_ADDR + 0x3fff;
                mxc_register_device(&mxc_rnga_device, NULL);
        }
+#endif
+#if defined(CONFIG_ARCH_MX35)
        if (cpu_is_mx35()) {
-                mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
-                mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0x1fff;
                otg_resources[0].start = MX35_OTG_BASE_ADDR;
                otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff;
                otg_resources[1].start = MXC_INT_USBOTG;
@@ -653,6 +417,7 @@ static int __init mx3_devices_init(void)
                imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR;
                imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff;
        }
+#endif
        return 0;
 }
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 2c3c8646a29e..e5535234839f 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -1,14 +1,4 @@
-extern struct platform_device mxc_uart_device0;
-extern struct platform_device mxc_uart_device1;
-extern struct platform_device mxc_uart_device2;
-extern struct platform_device mxc_uart_device3;
-extern struct platform_device mxc_uart_device4;
 extern struct platform_device mxc_w1_master_device;
-extern struct platform_device mxc_nand_device;
-extern struct platform_device mxc_i2c_device0;
-extern struct platform_device mxc_i2c_device1;
-extern struct platform_device mxc_i2c_device2;
 extern struct platform_device mx3_ipu;
 extern struct platform_device mx3_fb;
 extern struct platform_device mx3_camera;
@@ -20,9 +10,6 @@ extern struct platform_device mxc_otg_host;
 extern struct platform_device mxc_usbh1;
 extern struct platform_device mxc_usbh2;
 extern struct platform_device mxc_rnga_device;
-extern struct platform_device mxc_spi_device0;
-extern struct platform_device mxc_spi_device1;
-extern struct platform_device mxc_spi_device2;
 extern struct platform_device imx_ssi_device0;
 extern struct platform_device imx_ssi_device1;
 extern struct platform_device imx_ssi_device1;
diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
index 678597852443..368a603accfe 100644
--- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
@@ -46,6 +46,7 @@
 #include <mach/audmux.h>
 #include <mach/ssi.h>
+#include "devices-imx35.h"
 #include "devices.h"
 static const struct fb_videomode fb_modedb[] = {
@@ -196,7 +197,7 @@ static struct platform_device *platform_devices[] __initdata = {
        &eukrea_mbimxsd_lcd_powerdev,
 };
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
        .flags = IMXUART_HAVE_RTSCTS,
 };
@@ -238,7 +239,7 @@ void __init eukrea_mbimxsd_baseboard_init(void)
        );
 #endif
-        mxc_register_device(&mxc_uart_device1, &uart_pdata);
+        imx35_add_imx_uart1(&uart_pdata);
        mxc_register_device(&mx3_ipu, &mx3_ipu_data);
        mxc_register_device(&mx3_fb, &mx3fb_pdata);
diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c
index 5f72ec91af2d..96aadcadb4ff 100644
--- a/arch/arm/mach-mx3/mach-armadillo5x0.c
+++ b/arch/arm/mach-mx3/mach-armadillo5x0.c
@@ -48,16 +48,14 @@
 #include <asm/mach/map.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
-#include <mach/board-armadillo5x0.h>
 #include <mach/mmc.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
-#include <mach/mxc_nand.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
+#include "devices-imx31.h"
 #include "devices.h"
 #include "crm_regs.h"
@@ -301,7 +299,8 @@ static struct platform_device armadillo5x0_button_device = {
 /*
 * NAND Flash
 */
-static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = {
+static const struct mxc_nand_platform_data
+armadillo5x0_nand_board_info __initconst = {
        .width          = 1,
        .hw_ecc         = 1,
 };
@@ -493,13 +492,12 @@ static struct platform_device armadillo5x0_smc911x_device = {
 };
 /* UART device data */
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
        .flags = IMXUART_HAVE_RTSCTS,
 };
 static struct platform_device *devices[] __initdata = {
        &armadillo5x0_smc911x_device,
-        &mxc_i2c_device1,
        &armadillo5x0_button_device,
 };
@@ -512,10 +510,11 @@ static void __init armadillo5x0_init(void)
                        ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
        platform_add_devices(devices, ARRAY_SIZE(devices));
+        imx31_add_imx_i2c1(NULL);
        /* Register UART */
-        mxc_register_device(&mxc_uart_device0, &uart_pdata);
+        imx31_add_imx_uart0(&uart_pdata);
-        mxc_register_device(&mxc_uart_device1, &uart_pdata);
+        imx31_add_imx_uart1(&uart_pdata);
        /* SMSC9118 IRQ pin */
        gpio_direction_input(MX31_PIN_GPIO1_0);
@@ -532,7 +531,7 @@ static void __init armadillo5x0_init(void)
                            &armadillo5x0_nor_flash_pdata);
        /* Register NAND Flash */
-        mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata);
+        imx31_add_mxc_nand(&armadillo5x0_nand_board_info);
        /* set NAND page size to 2k if not configured via boot mode pins */
        __raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c
index 55caa5cb8bc7..4f6146d31328 100644
--- a/arch/arm/mach-mx3/mach-cpuimx35.c
+++ b/arch/arm/mach-mx3/mach-cpuimx35.c
@@ -40,20 +40,20 @@
 #include <mach/board-eukrea_cpuimx35.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
-#include <mach/i2c.h>
 #include <mach/iomux-mx35.h>
 #include <mach/mxc_nand.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
+#include "devices-imx35.h"
 #include "devices.h"
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
        .flags = IMXUART_HAVE_RTSCTS,
 };
-static struct imxi2c_platform_data eukrea_cpuimx35_i2c_1_data = {
+static const struct imxi2c_platform_data
+eukrea_cpuimx35_i2c0_data __initconst = {
        .bitrate = 50000,
 };
@@ -134,7 +134,8 @@ static struct pad_desc eukrea_cpuimx35_pads[] = {
        MX35_PAD_ATA_DA2__GPIO3_2,
 };
-static struct mxc_nand_platform_data pcm037_nand_board_info = {
+static const struct mxc_nand_platform_data
+eukrea_cpuimx35_nand_board_info __initconst = {
        .width          = 1,
        .hw_ecc         = 1,
        .flash_bbt      = 1,
@@ -181,12 +182,12 @@ static void __init mxc_board_init(void)
        platform_add_devices(devices, ARRAY_SIZE(devices));
-        mxc_register_device(&mxc_uart_device0, &uart_pdata);
+        imx35_add_imx_uart0(&uart_pdata);
-        mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
+        imx35_add_mxc_nand(&eukrea_cpuimx35_nand_board_info);
        i2c_register_board_info(0, eukrea_cpuimx35_i2c_devices,
                        ARRAY_SIZE(eukrea_cpuimx35_i2c_devices));
-        mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx35_i2c_1_data);
+        imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data);
 #if defined(CONFIG_USB_ULPI)
        if (otg_mode_host) {
diff --git a/arch/arm/mach-mx3/mach-kzm_arm11_01.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
index f085d5d1a6de..5b23e416d6c7 100644
--- a/arch/arm/mach-mx3/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
@@ -16,10 +16,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 #include <linux/gpio.h>
@@ -37,13 +33,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <mach/board-kzmarm11.h>
 #include <mach/clock.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/memory.h>
+#include "devices-imx31.h"
 #include "devices.h"
 #define KZM_ARM11_IO_ADDRESS(x) (                                       \
@@ -51,6 +46,23 @@
        IMX_IO_ADDRESS(x, MX31_CS5) ?:                                  \
        MX31_IO_ADDRESS(x))
+/*
+ *  KZM-ARM11-01 Board Control Registers on FPGA
+ */
+#define KZM_ARM11_CTL1          (MX31_CS4_BASE_ADDR + 0x1000)
+#define KZM_ARM11_CTL2          (MX31_CS4_BASE_ADDR + 0x1001)
+#define KZM_ARM11_RSW1          (MX31_CS4_BASE_ADDR + 0x1002)
+#define KZM_ARM11_BACK_LIGHT    (MX31_CS4_BASE_ADDR + 0x1004)
+#define KZM_ARM11_FPGA_REV      (MX31_CS4_BASE_ADDR + 0x1008)
+#define KZM_ARM11_7SEG_LED      (MX31_CS4_BASE_ADDR + 0x1010)
+#define KZM_ARM11_LEDS          (MX31_CS4_BASE_ADDR + 0x1020)
+#define KZM_ARM11_DIPSW2        (MX31_CS4_BASE_ADDR + 0x1003)
+/*
+ * External UART for touch panel on FPGA
+ */
+#define KZM_ARM11_16550         (MX31_CS4_BASE_ADDR + 0x1050)
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
 /*
 * KZM-ARM11-01 has an external UART on FPGA
@@ -173,15 +185,14 @@ static inline int kzm_init_smsc9118(void)
 #endif
 #if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
        .flags = IMXUART_HAVE_RTSCTS,
 };
 static void __init kzm_init_imx_uart(void)
 {
-        mxc_register_device(&mxc_uart_device0, &uart_pdata);
+        imx31_add_imx_uart0(&uart_pdata);
+        imx31_add_imx_uart1(&uart_pdata);
-        mxc_register_device(&mxc_uart_device1, &uart_pdata);
 }
 #else
 static inline void kzm_init_imx_uart(void)
diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
index 7e8d09ab9e6c..d4d9e7a1f735 100644
--- a/arch/arm/mach-mx3/mach-mx31_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -10,10 +10,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 #include <linux/delay.h>
@@ -37,19 +33,46 @@
 #include <asm/memory.h>
 #include <asm/mach/map.h>
 #include <mach/common.h>
-#include <mach/board-mx31_3ds.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
-#include <mach/mxc_nand.h>
-#include <mach/spi.h>
+#include "devices-imx31.h"
 #include "devices.h"
-/*!
+/* Definitions for components on the Debug board */
- * @file mx31_3ds.c
- *
+/* Base address of CPLD controller on the Debug board */
- * @brief This file contains the board-specific initialization routines.
+#define DEBUG_BASE_ADDRESS              CS5_IO_ADDRESS(MX3x_CS5_BASE_ADDR)
- *
- * @ingroup System
+/* LAN9217 ethernet base address */
+#define LAN9217_BASE_ADDR               MX3x_CS5_BASE_ADDR
+/* CPLD config and interrupt base address */
+#define CPLD_ADDR                       (DEBUG_BASE_ADDRESS + 0x20000)
+/* status, interrupt */
+#define CPLD_INT_STATUS_REG             (CPLD_ADDR + 0x10)
+#define CPLD_INT_MASK_REG               (CPLD_ADDR + 0x38)
+#define CPLD_INT_RESET_REG              (CPLD_ADDR + 0x20)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER1_REG          (CPLD_ADDR + 0x40)
+#define CPLD_MAGIC_NUMBER2_REG          (CPLD_ADDR + 0x48)
+/* CPLD code version */
+#define CPLD_CODE_VER_REG               (CPLD_ADDR + 0x50)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER3_REG          (CPLD_ADDR + 0x58)
+/* CPLD IRQ line for external uart, external ethernet etc */
+#define EXPIO_PARENT_INT        IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
+#define MXC_EXP_IO_BASE         (MXC_BOARD_IRQ_START)
+#define MXC_IRQ_TO_EXPIO(irq)   ((irq) - MXC_EXP_IO_BASE)
+#define EXPIO_INT_ENET          (MXC_EXP_IO_BASE + 0)
+#define MXC_MAX_EXP_IO_LINES    16
+/*
+ * This file contains the board-specific initialization routines.
 */
 static int mx31_3ds_pins[] = {
@@ -145,7 +168,7 @@ static int spi1_internal_chipselect[] = {
        MXC_SPI_CS(2),
 };
-static struct spi_imx_master spi1_pdata = {
+static const struct spi_imx_master spi1_pdata __initconst = {
        .chipselect     = spi1_internal_chipselect,
        .num_chipselect = ARRAY_SIZE(spi1_internal_chipselect),
 };
@@ -165,7 +188,8 @@ static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
 /*
 * NAND Flash
 */
-static struct mxc_nand_platform_data imx31_3ds_nand_flash_pdata = {
+static const struct mxc_nand_platform_data
+mx31_3ds_nand_board_info __initconst = {
        .width          = 1,
        .hw_ecc         = 1,
 #ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT
@@ -225,7 +249,7 @@ static struct fsl_usb2_platform_data usbotg_pdata = {
        .phy_mode       = FSL_USB2_PHY_ULPI,
 };
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
        .flags = IMXUART_HAVE_RTSCTS,
 };
@@ -407,10 +431,10 @@ static void __init mxc_board_init(void)
        mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
                                      "mx31_3ds");
-        mxc_register_device(&mxc_uart_device0, &uart_pdata);
+        imx31_add_imx_uart0(&uart_pdata);
-        mxc_register_device(&mxc_nand_device, &imx31_3ds_nand_flash_pdata);
+        imx31_add_mxc_nand(&mx31_3ds_nand_board_info);
-        mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+        imx31_add_spi_imx0(&spi1_pdata);
        spi_register_board_info(mx31_3ds_spi_devs,
                                                ARRAY_SIZE(mx31_3ds_spi_devs));
diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c
index b3d1a1895c20..94b3e7c42404 100644
--- a/arch/arm/mach-mx3/mach-mx31ads.c
+++ b/arch/arm/mach-mx3/mach-mx31ads.c
@@ -12,10 +12,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 #include <linux/types.h>
@@ -33,8 +29,6 @@
 #include <asm/memory.h>
 #include <asm/mach/map.h>
 #include <mach/common.h>
-#include <mach/board-mx31ads.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
@@ -43,14 +37,45 @@
 #include <linux/mfd/wm8350/pmic.h>
 #endif
+#include "devices-imx31.h"
 #include "devices.h"
-/*!
+/* Base address of PBC controller */
- * @file mx31ads.c
+#define PBC_BASE_ADDRESS        MX31_CS4_BASE_ADDR_VIRT
- *
+/* Offsets for the PBC Controller register */
- * @brief This file contains the board-specific initialization routines.
- *
+/* PBC Board interrupt status register */
- * @ingroup System
+#define PBC_INTSTATUS           0x000016
+/* PBC Board interrupt current status register */
+#define PBC_INTCURR_STATUS      0x000018
+/* PBC Interrupt mask register set address */
+#define PBC_INTMASK_SET         0x00001A
+/* PBC Interrupt mask register clear address */
+#define PBC_INTMASK_CLEAR       0x00001C
+/* External UART A */
+#define PBC_SC16C652_UARTA      0x010000
+/* External UART B */
+#define PBC_SC16C652_UARTB      0x010010
+#define PBC_INTSTATUS_REG       (PBC_INTSTATUS + PBC_BASE_ADDRESS)
+#define PBC_INTMASK_SET_REG     (PBC_INTMASK_SET + PBC_BASE_ADDRESS)
+#define PBC_INTMASK_CLEAR_REG   (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
+#define EXPIO_PARENT_INT        IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
+#define MXC_EXP_IO_BASE         (MXC_BOARD_IRQ_START)
+#define MXC_IRQ_TO_EXPIO(irq)   ((irq) - MXC_EXP_IO_BASE)
+#define EXPIO_INT_XUART_INTA    (MXC_EXP_IO_BASE + 10)
+#define EXPIO_INT_XUART_INTB    (MXC_EXP_IO_BASE + 11)
+#define MXC_MAX_EXP_IO_LINES    16
+/*
+ * This file contains the board-specific initialization routines.
 */
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
@@ -98,7 +123,7 @@ static inline int mxc_init_extuart(void)
 #endif
 #if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
        .flags = IMXUART_HAVE_RTSCTS,
 };
@@ -112,7 +137,7 @@ static unsigned int uart_pins[] = {
 static inline void mxc_init_imx_uart(void)
 {
        mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
-        mxc_register_device(&mxc_uart_device0, &uart_pdata);
+        imx31_add_imx_uart0(&uart_pdata);
 }
 #else /* !SERIAL_IMX */
 static inline void mxc_init_imx_uart(void)
@@ -475,7 +500,7 @@ static void mxc_init_i2c(void)
        mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1));
        mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1));
-        mxc_register_device(&mxc_i2c_device1, NULL);
+        imx31_add_imx_i2c1(NULL);
 }
 #else
 static void mxc_init_i2c(void)
diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c
index 46bf57c44372..84942cf41b63 100644
--- a/arch/arm/mach-mx3/mach-mx31lilly.c
+++ b/arch/arm/mach-mx3/mach-mx31lilly.c
@@ -18,10 +18,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 #include <linux/types.h>
@@ -46,10 +42,10 @@
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31lilly.h>
-#include <mach/spi.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
+#include "devices-imx31.h"
 #include "devices.h"
 /*
@@ -257,12 +253,12 @@ static int spi_internal_chipselect[] = {
        MXC_SPI_CS(2),
 };
-static struct spi_imx_master spi0_pdata = {
+static const struct spi_imx_master spi0_pdata __initconst = {
        .chipselect = spi_internal_chipselect,
        .num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
 };
-static struct spi_imx_master spi1_pdata = {
+static const struct spi_imx_master spi1_pdata __initconst = {
        .chipselect = spi_internal_chipselect,
        .num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
 };
@@ -315,8 +311,8 @@ static void __init mx31lilly_board_init(void)
        mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1");
        mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2");
-        mxc_register_device(&mxc_spi_device0, &spi0_pdata);
+        imx31_add_spi_imx0(&spi0_pdata);
-        mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+        imx31_add_spi_imx1(&spi1_pdata);
        spi_register_board_info(&mc13783_dev, 1);
        platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c
index 2b6d11400877..da236c497d2a 100644
--- a/arch/arm/mach-mx3/mach-mx31lite.c
+++ b/arch/arm/mach-mx3/mach-mx31lite.c
@@ -13,10 +13,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 #include <linux/types.h>
@@ -42,14 +38,12 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/board-mx31lite.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/irqs.h>
-#include <mach/mxc_nand.h>
-#include <mach/spi.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
+#include "devices-imx31.h"
 #include "devices.h"
 /*
@@ -69,7 +63,8 @@ static unsigned int mx31lite_pins[] = {
        MX31_PIN_CSPI2_SS2__SS2,
 };
-static struct mxc_nand_platform_data mx31lite_nand_board_info = {
+static const struct mxc_nand_platform_data
+mx31lite_nand_board_info __initconst  = {
        .width = 1,
        .hw_ecc = 1,
 };
@@ -112,7 +107,7 @@ static int spi_internal_chipselect[] = {
        MXC_SPI_CS(0),
 };
-static struct spi_imx_master spi1_pdata = {
+static const struct spi_imx_master spi1_pdata __initconst = {
        .chipselect     = spi_internal_chipselect,
        .num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
 };
@@ -253,9 +248,9 @@ static void __init mxc_board_init(void)
        /* NOR and NAND flash */
        platform_device_register(&physmap_flash_device);
-        mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info);
+        imx31_add_mxc_nand(&mx31lite_nand_board_info);
-        mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+        imx31_add_spi_imx1(&spi1_pdata);
        spi_register_board_info(&mc13783_spi_dev, 1);
 #if defined(CONFIG_USB_ULPI)
diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c
index 33a8d35498a7..67776bc61c33 100644
--- a/arch/arm/mach-mx3/mach-mx31moboard.c
+++ b/arch/arm/mach-mx3/mach-mx31moboard.c
@@ -10,10 +10,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 #include <linux/delay.h>
@@ -42,16 +38,15 @@
 #include <mach/board-mx31moboard.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/ipu.h>
-#include <mach/i2c.h>
 #include <mach/mmc.h>
 #include <mach/mxc_ehci.h>
 #include <mach/mx3_camera.h>
 #include <mach/spi.h>
 #include <mach/ulpi.h>
+#include "devices-imx31.h"
 #include "devices.h"
 static unsigned int moboard_pins[] = {
@@ -130,24 +125,36 @@ static struct platform_device mx31moboard_flash = {
 static int moboard_uart0_init(struct platform_device *pdev)
 {
-        gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
+        int ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
-        gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
+        if (ret)
-        return 0;
+                return ret;
+        ret = gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
+        if (ret)
+                gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));
+        return ret;
+}
+static void moboard_uart0_exit(struct platform_device *pdev)
+{
+        gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));
 }
-static struct imxuart_platform_data uart0_pdata = {
+static const struct imxuart_platform_data uart0_pdata __initconst = {
        .init = moboard_uart0_init,
+        .exit = moboard_uart0_exit,
 };
-static struct imxuart_platform_data uart4_pdata = {
+static const struct imxuart_platform_data uart4_pdata __initconst = {
        .flags = IMXUART_HAVE_RTSCTS,
 };
-static struct imxi2c_platform_data moboard_i2c0_pdata = {
+static const struct imxi2c_platform_data moboard_i2c0_data __initconst = {
        .bitrate = 400000,
 };
-static struct imxi2c_platform_data moboard_i2c1_pdata = {
+static const struct imxi2c_platform_data moboard_i2c1_data __initconst = {
        .bitrate = 100000,
 };
@@ -156,7 +163,7 @@ static int moboard_spi1_cs[] = {
        MXC_SPI_CS(2),
 };
-static struct spi_imx_master moboard_spi1_master = {
+static const struct spi_imx_master moboard_spi1_pdata __initconst = {
        .chipselect     = moboard_spi1_cs,
        .num_chipselect = ARRAY_SIZE(moboard_spi1_cs),
 };
@@ -220,11 +227,54 @@ static struct mc13783_regulator_init_data moboard_regulators[] = {
        },
 };
+static struct mc13783_led_platform_data moboard_led[] = {
+        {
+                .id = MC13783_LED_R1,
+                .name = "coreboard-led-4:red",
+                .max_current = 2,
+        },
+        {
+                .id = MC13783_LED_G1,
+                .name = "coreboard-led-4:green",
+                .max_current = 2,
+        },
+        {
+                .id = MC13783_LED_B1,
+                .name = "coreboard-led-4:blue",
+                .max_current = 2,
+        },
+        {
+                .id = MC13783_LED_R2,
+                .name = "coreboard-led-5:red",
+                .max_current = 3,
+        },
+        {
+                .id = MC13783_LED_G2,
+                .name = "coreboard-led-5:green",
+                .max_current = 3,
+        },
+        {
+                .id = MC13783_LED_B2,
+                .name = "coreboard-led-5:blue",
+                .max_current = 3,
+        },
+};
+static struct mc13783_leds_platform_data moboard_leds = {
+        .num_leds = ARRAY_SIZE(moboard_led),
+        .led = moboard_led,
+        .flags = MC13783_LED_SLEWLIMTC,
+        .abmode = MC13783_LED_AB_DISABLED,
+        .tc1_period = MC13783_LED_PERIOD_10MS,
+        .tc2_period = MC13783_LED_PERIOD_10MS,
+};
 static struct mc13783_platform_data moboard_pmic = {
        .regulators = moboard_regulators,
        .num_regulators = ARRAY_SIZE(moboard_regulators),
+        .leds = &moboard_leds,
        .flags = MC13783_USE_REGULATOR | MC13783_USE_RTC |
-                MC13783_USE_ADC,
+                MC13783_USE_ADC | MC13783_USE_LED,
 };
 static struct spi_board_info moboard_spi_board_info[] __initdata = {
@@ -243,7 +293,7 @@ static int moboard_spi2_cs[] = {
        MXC_SPI_CS(1),
 };
-static struct spi_imx_master moboard_spi2_master = {
+static const struct spi_imx_master moboard_spi2_pdata __initconst = {
        .chipselect     = moboard_spi2_cs,
        .num_chipselect = ARRAY_SIZE(moboard_spi2_cs),
 };
@@ -456,15 +506,14 @@ static void __init mxc_board_init(void)
        platform_add_devices(devices, ARRAY_SIZE(devices));
-        mxc_register_device(&mxc_uart_device0, &uart0_pdata);
+        imx31_add_imx_uart0(&uart0_pdata);
+        imx31_add_imx_uart4(&uart4_pdata);
-        mxc_register_device(&mxc_uart_device4, &uart4_pdata);
-        mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
+        imx31_add_imx_i2c0(&moboard_i2c0_data);
-        mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
+        imx31_add_imx_i2c1(&moboard_i2c1_data);
-        mxc_register_device(&mxc_spi_device1, &moboard_spi1_master);
+        imx31_add_spi_imx1(&moboard_spi1_pdata);
-        mxc_register_device(&mxc_spi_device2, &moboard_spi2_master);
+        imx31_add_spi_imx2(&moboard_spi2_pdata);
        gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
        gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
diff --git a/arch/arm/mach-mx3/mach-mx35pdk.c b/arch/arm/mach-mx3/mach-mx35_3ds.c
index bcac84d4dca4..1c30d7212f17 100644
--- a/arch/arm/mach-mx3/mach-mx35pdk.c
+++ b/arch/arm/mach-mx3/mach-mx35_3ds.c
@@ -12,10 +12,12 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
+ */
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
+/*
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * This machine is known as:
+ *  - i.MX35 3-Stack Development System
+ *  - i.MX35 Platform Development Kit (i.MX35 PDK)
 */
 #include <linux/types.h>
@@ -32,12 +34,12 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx35.h>
+#include "devices-imx35.h"
 #include "devices.h"
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
        .flags = IMXUART_HAVE_RTSCTS,
 };
@@ -90,7 +92,7 @@ static void __init mxc_board_init(void)
        platform_add_devices(devices, ARRAY_SIZE(devices));
-        mxc_register_device(&mxc_uart_device0, &uart_pdata);
+        imx35_add_imx_uart0(&uart_pdata);
        mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c
index bb6c056854e9..8a292dd1a714 100644
--- a/arch/arm/mach-mx3/mach-pcm037.c
+++ b/arch/arm/mach-mx3/mach-pcm037.c
@@ -10,10 +10,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 #include <linux/types.h>
@@ -43,20 +39,17 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <mach/board-pcm037.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/i2c.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/ipu.h>
 #include <mach/mmc.h>
 #include <mach/mx3_camera.h>
 #include <mach/mx3fb.h>
-#include <mach/mxc_nand.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
+#include "devices-imx31.h"
 #include "devices.h"
 #include "pcm037.h"
@@ -225,7 +218,7 @@ static struct platform_device pcm037_flash = {
        .num_resources = 1,
 };
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
        .flags = IMXUART_HAVE_RTSCTS,
 };
@@ -279,16 +272,17 @@ static struct platform_device pcm037_sram_device = {
        .resource = &pcm038_sram_resource,
 };
-static struct mxc_nand_platform_data pcm037_nand_board_info = {
+static const struct mxc_nand_platform_data
+pcm037_nand_board_info __initconst = {
        .width = 1,
        .hw_ecc = 1,
 };
-static struct imxi2c_platform_data pcm037_i2c_1_data = {
+static const struct imxi2c_platform_data pcm037_i2c1_data __initconst = {
        .bitrate = 100000,
 };
-static struct imxi2c_platform_data pcm037_i2c_2_data = {
+static const struct imxi2c_platform_data pcm037_i2c2_data __initconst = {
        .bitrate = 20000,
 };
@@ -615,9 +609,10 @@ static void __init mxc_board_init(void)
        platform_add_devices(devices, ARRAY_SIZE(devices));
-        mxc_register_device(&mxc_uart_device0, &uart_pdata);
+        imx31_add_imx_uart0(&uart_pdata);
-        mxc_register_device(&mxc_uart_device1, &uart_pdata);
+        /* XXX: should't this have .flags = 0 (i.e. no RTSCTS) on PCM037_EET? */
-        mxc_register_device(&mxc_uart_device2, &uart_pdata);
+        imx31_add_imx_uart1(&uart_pdata);
+        imx31_add_imx_uart2(&uart_pdata);
        mxc_register_device(&mxc_w1_master_device, NULL);
@@ -635,10 +630,10 @@ static void __init mxc_board_init(void)
        i2c_register_board_info(1, pcm037_i2c_devices,
                        ARRAY_SIZE(pcm037_i2c_devices));
-        mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data);
+        imx31_add_imx_i2c1(&pcm037_i2c1_data);
-        mxc_register_device(&mxc_i2c_device2, &pcm037_i2c_2_data);
+        imx31_add_imx_i2c2(&pcm037_i2c2_data);
-        mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
+        imx31_add_mxc_nand(&pcm037_nand_board_info);
        mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
        mxc_register_device(&mx3_ipu, &mx3_ipu_data);
        mxc_register_device(&mx3_fb, &mx3fb_pdata);
diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c
index 8d386000fc40..c8b98218efee 100644
--- a/arch/arm/mach-mx3/mach-pcm037_eet.c
+++ b/arch/arm/mach-mx3/mach-pcm037_eet.c
@@ -13,9 +13,6 @@
 #include <linux/spi/spi.h>
 #include <mach/common.h>
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-#include <mach/spi.h>
-#endif
 #include <mach/iomux-mx3.h>
 #include <asm/mach-types.h>
@@ -64,7 +61,7 @@ static struct spi_board_info pcm037_spi_dev[] = {
 #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
 static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
-struct spi_imx_master pcm037_spi1_master = {
+static const struct spi_imx_master pcm037_spi1_pdata __initconst = {
        .chipselect = pcm037_spi1_cs,
        .num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
 };
@@ -184,7 +181,7 @@ static int eet_init_devices(void)
        /* SPI */
        spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
 #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-        mxc_register_device(&mxc_spi_device0, &pcm037_spi1_master);
+        imx35_add_spi_imx0(&pcm037_spi1_pdata);
 #endif
        platform_device_register(&pcm037_gpio_keys_device);
diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
index 8071b7281c4b..b92f624c755e 100644
--- a/arch/arm/mach-mx3/mach-pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -10,10 +10,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 #include <linux/types.h>
@@ -40,19 +36,15 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
-#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
-#include <mach/i2c.h>
-#endif
 #include <mach/iomux-mx35.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
-#include <mach/mxc_nand.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 #include <mach/audmux.h>
 #include <mach/ssi.h>
+#include "devices-imx35.h"
 #include "devices.h"
 static const struct fb_videomode fb_modedb[] = {
@@ -122,12 +114,12 @@ static struct platform_device pcm043_flash = {
        .num_resources = 1,
 };
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
        .flags = IMXUART_HAVE_RTSCTS,
 };
 #if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
-static struct imxi2c_platform_data pcm043_i2c_1_data = {
+static const struct imxi2c_platform_data pcm043_i2c0_data __initconst = {
        .bitrate = 50000,
 };
@@ -304,7 +296,8 @@ static struct imx_ssi_platform_data pcm043_ssi_pdata = {
        .flags = IMX_SSI_USE_AC97,
 };
-static struct mxc_nand_platform_data pcm037_nand_board_info = {
+static const struct mxc_nand_platform_data
+pcm037_nand_board_info __initconst = {
        .width = 1,
        .hw_ecc = 1,
 };
@@ -363,17 +356,17 @@ static void __init mxc_board_init(void)
        platform_add_devices(devices, ARRAY_SIZE(devices));
-        mxc_register_device(&mxc_uart_device0, &uart_pdata);
+        imx35_add_imx_uart0(&uart_pdata);
-        mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
+        imx35_add_mxc_nand(&pcm037_nand_board_info);
        mxc_register_device(&imx_ssi_device0, &pcm043_ssi_pdata);
-        mxc_register_device(&mxc_uart_device1, &uart_pdata);
+        imx35_add_imx_uart1(&uart_pdata);
 #if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
        i2c_register_board_info(0, pcm043_i2c_devices,
                        ARRAY_SIZE(pcm043_i2c_devices));
-        mxc_register_device(&mxc_i2c_device0, &pcm043_i2c_1_data);
+        imx35_add_imx_i2c0(&pcm043_i2c0_data);
 #endif
        mxc_register_device(&mx3_ipu, &mx3_ipu_data);
diff --git a/arch/arm/mach-mx3/mach-qong.c b/arch/arm/mach-mx3/mach-qong.c
index e5b5b8323a17..d44ac70222a5 100644
--- a/arch/arm/mach-mx3/mach-qong.c
+++ b/arch/arm/mach-mx3/mach-qong.c
@@ -10,10 +10,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 #include <linux/types.h>
@@ -34,9 +30,9 @@
 #include <mach/common.h>
 #include <asm/page.h>
 #include <asm/setup.h>
-#include <mach/board-qong.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+#include "devices-imx31.h"
 #include "devices.h"
 /* FPGA defines */
@@ -62,7 +58,7 @@
 * This file contains the board-specific initialization routines.
 */
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
        .flags = IMXUART_HAVE_RTSCTS,
 };
@@ -73,11 +69,11 @@ static int uart_pins[] = {
        MX31_PIN_RXD1__RXD1
 };
-static inline void mxc_init_imx_uart(void)
+static inline void __init mxc_init_imx_uart(void)
 {
        mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins),
                        "uart-0");
-        mxc_register_device(&mxc_uart_device0, &uart_pdata);
+        imx31_add_imx_uart0(&uart_pdata);
 }
 static struct resource dnet_resources[] = {
@@ -116,7 +112,7 @@ static struct physmap_flash_data qong_flash_data = {
 static struct resource qong_flash_resource = {
        .start = MX31_CS0_BASE_ADDR,
-        .end = MX31_CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
+        .end = MX31_CS0_BASE_ADDR + SZ_128M - 1,
        .flags = IORESOURCE_MEM,
 };
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 6858a4f9806c..a378fba49a8b 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -14,10 +14,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 #include <linux/mm.h>
@@ -97,8 +93,11 @@ void __init mx35_map_io(void)
 }
 #endif
+int imx3x_register_gpios(void);
 void __init mx31_init_irq(void)
 {
+        imx3x_register_gpios();
        mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
 }
diff --git a/arch/arm/mach-mx3/mx31lilly-db.c b/arch/arm/mach-mx3/mx31lilly-db.c
index 7aebd74a12e8..827fd3c80201 100644
--- a/arch/arm/mach-mx3/mx31lilly-db.c
+++ b/arch/arm/mach-mx3/mx31lilly-db.c
@@ -18,10 +18,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 #include <linux/kernel.h>
@@ -36,13 +32,13 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31lilly.h>
 #include <mach/mmc.h>
 #include <mach/mx3fb.h>
 #include <mach/ipu.h>
+#include "devices-imx31.h"
 #include "devices.h"
 /*
@@ -96,7 +92,7 @@ static unsigned int lilly_db_board_pins[] __initdata = {
 };
 /* UART */
-static struct imxuart_platform_data uart_pdata __initdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
        .flags = IMXUART_HAVE_RTSCTS,
 };
@@ -217,9 +213,9 @@ void __init mx31lilly_db_init(void)
        mxc_iomux_setup_multiple_pins(lilly_db_board_pins,
                                        ARRAY_SIZE(lilly_db_board_pins),
                                        "development board pins");
-        mxc_register_device(&mxc_uart_device0, &uart_pdata);
+        imx31_add_imx_uart0(&uart_pdata);
-        mxc_register_device(&mxc_uart_device1, &uart_pdata);
+        imx31_add_imx_uart1(&uart_pdata);
-        mxc_register_device(&mxc_uart_device2, &uart_pdata);
+        imx31_add_imx_uart2(&uart_pdata);
        mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
        mx31lilly_init_fb();
 }
diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c
index 5f05bfbec380..7b0e74e275ba 100644
--- a/arch/arm/mach-mx3/mx31lite-db.c
+++ b/arch/arm/mach-mx3/mx31lite-db.c
@@ -18,10 +18,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 #include <linux/kernel.h>
@@ -37,12 +33,11 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31lite.h>
 #include <mach/mmc.h>
-#include <mach/spi.h>
+#include "devices-imx31.h"
 #include "devices.h"
 /*
@@ -76,7 +71,7 @@ static unsigned int litekit_db_board_pins[] __initdata = {
 };
 /* UART */
-static struct imxuart_platform_data uart_pdata __initdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
        .flags = IMXUART_HAVE_RTSCTS,
 };
@@ -161,7 +156,7 @@ static int spi_internal_chipselect[] = {
        MXC_SPI_CS(2),
 };
-static struct spi_imx_master spi0_pdata = {
+static const struct spi_imx_master spi0_pdata __initconst = {
        .chipselect     = spi_internal_chipselect,
        .num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
 };
@@ -201,9 +196,9 @@ void __init mx31lite_db_init(void)
        mxc_iomux_setup_multiple_pins(litekit_db_board_pins,
                                        ARRAY_SIZE(litekit_db_board_pins),
                                        "development board pins");
-        mxc_register_device(&mxc_uart_device0, &uart_pdata);
+        imx31_add_imx_uart0(&uart_pdata);
        mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
-        mxc_register_device(&mxc_spi_device0, &spi0_pdata);
+        imx31_add_spi_imx0(&spi0_pdata);
        platform_device_register(&litekit_led_device);
        mxc_register_device(&imx_wdt_device0, NULL);
        mxc_register_device(&imx_rtc_device0, NULL);
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 582299cb2c08..fc395a7a8599 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -10,10 +10,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 #include <linux/gpio.h>
@@ -27,13 +23,13 @@
 #include <linux/usb/otg.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/hardware.h>
 #include <mach/mmc.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
+#include "devices-imx31.h"
 #include "devices.h"
 static unsigned int devboard_pins[] = {
@@ -56,7 +52,7 @@ static unsigned int devboard_pins[] = {
        MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
 };
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
        .flags = IMXUART_HAVE_RTSCTS,
 };
@@ -230,7 +226,7 @@ void __init mx31moboard_devboard_init(void)
        mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins),
                "devboard");
-        mxc_register_device(&mxc_uart_device1, &uart_pdata);
+        imx31_add_imx_uart1(&uart_pdata);
        mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 4930f8c27e66..0551eb39d97e 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -10,10 +10,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 #include <linux/delay.h>
diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c
index 293eea6d9d97..40c3e7564cb6 100644
--- a/arch/arm/mach-mx3/mx31moboard-smartbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c
@@ -10,10 +10,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 #include <linux/delay.h>
@@ -30,7 +26,6 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31moboard.h>
 #include <mach/mxc_ehci.h>
@@ -38,6 +33,7 @@
 #include <media/soc_camera.h>
+#include "devices-imx31.h"
 #include "devices.h"
 static unsigned int smartbot_pins[] = {
@@ -59,7 +55,7 @@ static unsigned int smartbot_pins[] = {
        MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
 };
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
        .flags = IMXUART_HAVE_RTSCTS,
 };
@@ -183,8 +179,7 @@ void __init mx31moboard_smartbot_init(int board)
        mxc_iomux_setup_multiple_pins(smartbot_pins, ARRAY_SIZE(smartbot_pins),
                "smartbot");
-        mxc_register_device(&mxc_uart_device1, &uart_pdata);
+        imx31_add_imx_uart1(&uart_pdata);
        switch (board) {
        case MX31SMARTBOT:
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
index ede4fcbc7e80..fa118646c99e 100644
--- a/arch/arm/mach-mx5/devices.c
+++ b/arch/arm/mach-mx5/devices.c
@@ -253,7 +253,7 @@ static struct mxc_gpio_port mxc_gpio_ports[] = {
        },
 };
-int __init mxc_register_gpios(void)
+int __init imx51_register_gpios(void)
 {
        return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
 }
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
index b7677ef80cc4..2f79722508cf 100644
--- a/arch/arm/mach-mx5/mm.c
+++ b/arch/arm/mach-mx5/mm.c
@@ -65,6 +65,8 @@ void __init mx51_map_io(void)
        iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
+int imx51_register_gpios(void);
 void __init mx51_init_irq(void)
 {
        unsigned long tzic_addr;
@@ -79,5 +81,6 @@ void __init mx51_init_irq(void)
        if (!tzic_virt)
                panic("unable to map TZIC interrupt controller\n");
+        imx51_register_gpios();
        tzic_init_irq(tzic_virt);
 }
diff --git a/arch/arm/mach-mxc91231/crm_regs.h b/arch/arm/mach-mxc91231/crm_regs.h
index ce4f59058189..b989baccd675 100644
--- a/arch/arm/mach-mxc91231/crm_regs.h
+++ b/arch/arm/mach-mxc91231/crm_regs.h
@@ -11,11 +11,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
 */
 #ifndef _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_
diff --git a/arch/arm/mach-mxc91231/devices.c b/arch/arm/mach-mxc91231/devices.c
index 353bd977b393..027af4f0d18a 100644
--- a/arch/arm/mach-mxc91231/devices.c
+++ b/arch/arm/mach-mxc91231/devices.c
@@ -135,7 +135,7 @@ static struct mxc_gpio_port mxc_gpio_ports[] = {
        },
 };
-int __init mxc_register_gpios(void)
+int __init mxc91231_register_gpios(void)
 {
        return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
 }
diff --git a/arch/arm/mach-mxc91231/mm.c b/arch/arm/mach-mxc91231/mm.c
index 6becda3ff331..aeccfd755fee 100644
--- a/arch/arm/mach-mxc91231/mm.c
+++ b/arch/arm/mach-mxc91231/mm.c
@@ -15,11 +15,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
 */
 #include <linux/mm.h>
@@ -88,7 +83,10 @@ void __init mxc91231_map_io(void)
        iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
+int mxc91231_register_gpios(void);
 void __init mxc91231_init_irq(void)
 {
+        mxc91231_register_gpios();
        mxc_init_irq(MXC91231_IO_ADDRESS(MXC91231_AVIC_BASE_ADDR));
 }
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index e7d629b3c76a..f474a80b8867 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -137,9 +137,7 @@ static void ads7846_dev_init(void)
        }
        gpio_direction_input(ts_gpio);
+        gpio_set_debounce(ts_gpio, 310);
-        omap_set_gpio_debounce(ts_gpio, 1);
-        omap_set_gpio_debounce_time(ts_gpio, 0xa);
 }
 static int ads7846_get_pendown_state(void)
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 5fcb52e71298..fefd7e6e9779 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -209,8 +209,7 @@ static void ads7846_dev_init(void)
        }
        gpio_direction_input(ts_gpio);
-        omap_set_gpio_debounce(ts_gpio, 1);
+        gpio_set_debounce(ts_gpio, 310);
-        omap_set_gpio_debounce_time(ts_gpio, 0xa);
 }
 static int ads7846_get_pendown_state(void)
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 81bba194b030..b95261013812 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -579,9 +579,7 @@ static void ads7846_dev_init(void)
                printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
        gpio_direction_input(OMAP3_EVM_TS_GPIO);
+        gpio_set_debounce(OMAP3_EVM_TS_GPIO, 310);
-        omap_set_gpio_debounce(OMAP3_EVM_TS_GPIO, 1);
-        omap_set_gpio_debounce_time(OMAP3_EVM_TS_GPIO, 0xa);
 }
 static int ads7846_get_pendown_state(void)
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 395d049bf010..db06dc910ba7 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -130,8 +130,8 @@ static struct platform_device pandora_keys_gpio = {
 static void __init pandora_keys_gpio_init(void)
 {
        /* set debounce time for GPIO banks 4 and 6 */
-        omap_set_gpio_debounce_time(32 * 3, GPIO_DEBOUNCE_TIME);
+        gpio_set_debounce(32 * 3, GPIO_DEBOUNCE_TIME);
-        omap_set_gpio_debounce_time(32 * 5, GPIO_DEBOUNCE_TIME);
+        gpio_set_debounce(32 * 5, GPIO_DEBOUNCE_TIME);
 }
 static int board_keymap[] = {
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 2504d41f923e..2f5f8233dd5b 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -328,8 +328,7 @@ static void __init omap3_ads7846_init(void)
        }
        gpio_direction_input(OMAP3_TS_GPIO);
-        omap_set_gpio_debounce(OMAP3_TS_GPIO, 1);
+        gpio_set_debounce(OMAP3_TS_GPIO, 310);
-        omap_set_gpio_debounce_time(OMAP3_TS_GPIO, 0xa);
 }
 static struct ads7846_platform_data ads7846_config = {
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 685f34a9634b..fe0de1698edc 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -240,22 +240,23 @@ error_fail:
 #define ORION_BLINK_HALF_PERIOD 100 /* ms */
-static int dns323_gpio_blink_set(unsigned gpio,
+static int dns323_gpio_blink_set(unsigned gpio, int state,
        unsigned long *delay_on, unsigned long *delay_off)
 {
-        static int value = 0;
-        if (!*delay_on && !*delay_off)
+        if (delay_on && delay_off && !*delay_on && !*delay_off)
                *delay_on = *delay_off = ORION_BLINK_HALF_PERIOD;
-        if (ORION_BLINK_HALF_PERIOD == *delay_on
+        switch(state) {
-            && ORION_BLINK_HALF_PERIOD == *delay_off) {
+        case GPIO_LED_NO_BLINK_LOW:
-                value = !value;
+        case GPIO_LED_NO_BLINK_HIGH:
-                orion_gpio_set_blink(gpio, value);
+                orion_gpio_set_blink(gpio, 0);
-                return 0;
+                gpio_set_value(gpio, state);
+                break;
+        case GPIO_LED_BLINK:
+                orion_gpio_set_blink(gpio, 1);
        }
+        return 0;
-        return -EINVAL;
 }
 static struct gpio_led dns323_leds[] = {
@@ -263,6 +264,7 @@ static struct gpio_led dns323_leds[] = {
                .name = "power:blue",
                .gpio = DNS323_GPIO_LED_POWER2,
                .default_trigger = "timer",
+                .active_low = 1,
        }, {
                .name = "right:amber",
                .gpio = DNS323_GPIO_LED_RIGHT_AMBER,
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index 45799c608d8f..9e39faa283b9 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -49,7 +49,6 @@
 #include <linux/io.h>
 #include <linux/i2c.h>
-#include <linux/backlight.h>
 #include <linux/regulator/machine.h>
 #include <linux/mfd/pcf50633/core.h>
@@ -57,6 +56,7 @@
 #include <linux/mfd/pcf50633/adc.h>
 #include <linux/mfd/pcf50633/gpio.h>
 #include <linux/mfd/pcf50633/pmic.h>
+#include <linux/mfd/pcf50633/backlight.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -254,6 +254,12 @@ static char *gta02_batteries[] = {
        "battery",
 };
+static struct pcf50633_bl_platform_data gta02_backlight_data = {
+        .default_brightness = 0x3f,
+        .default_brightness_limit = 0,
+        .ramp_time = 5,
+};
 struct pcf50633_platform_data gta02_pcf_pdata = {
        .resumers = {
                [0] =   PCF50633_INT1_USBINS |
@@ -271,6 +277,8 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
        .charger_reference_current_ma = 1000,
+        .backlight_data = &gta02_backlight_data,
        .reg_init_data = {
                [PCF50633_REGULATOR_AUTO] = {
                        .constraints = {
@@ -478,71 +486,6 @@ static struct s3c2410_udc_mach_info gta02_udc_cfg = {
 };
-static void gta02_bl_set_intensity(int intensity)
-{
-        struct pcf50633 *pcf = gta02_pcf;
-        int old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
-        /* We map 8-bit intensity to 6-bit intensity in hardware. */
-        intensity >>= 2;
-        /*
-         * This can happen during, eg, print of panic on blanked console,
-         * but we can't service i2c without interrupts active, so abort.
-         */
-        if (in_atomic()) {
-                printk(KERN_ERR "gta02_bl_set_intensity called while atomic\n");
-                return;
-        }
-        old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
-        if (intensity == old_intensity)
-                return;
-        /* We can't do this anywhere else. */
-        pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 5);
-        if (!(pcf50633_reg_read(pcf, PCF50633_REG_LEDENA) & 3))
-                old_intensity = 0;
-        /*
-         * The PCF50633 cannot handle LEDOUT = 0 (datasheet p60)
-         * if seen, you have to re-enable the LED unit.
-         */
-        if (!intensity || !old_intensity)
-                pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0);
-        /* Illegal to set LEDOUT to 0. */
-        if (!intensity)
-                pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f, 2);
-        else
-                pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f,
-                                          intensity);
-        if (intensity)
-                pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 2);
-}
-static struct generic_bl_info gta02_bl_info = {
-        .name                   = "gta02-bl",
-        .max_intensity          = 0xff,
-        .default_intensity      = 0xff,
-        .set_bl_intensity       = gta02_bl_set_intensity,
-};
-static struct platform_device gta02_bl_dev = {
-        .name                   = "generic-bl",
-        .id                     = 1,
-        .dev = {
-                .platform_data = &gta02_bl_info,
-        },
-};
 /* USB */
 static struct s3c2410_hcd_info gta02_usb_info __initdata = {
        .port[0]        = {
@@ -579,7 +522,6 @@ static struct platform_device *gta02_devices[] __initdata = {
 /* These guys DO need to be children of PMU. */
 static struct platform_device *gta02_devices_pmu_children[] = {
-        &gta02_bl_dev,
 };
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index 7a4138beb665..fbd85a9b7bbf 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -259,6 +259,12 @@ static struct clk init_clocks[] = {
                .enable         = s3c64xx_hclk_ctrl,
                .ctrlbit        = S3C_CLKCON_HCLK_HSMMC2,
        }, {
+                .name           = "otg",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s3c64xx_hclk_ctrl,
+                .ctrlbit        = S3C_CLKCON_HCLK_USB,
+        }, {
                .name           = "timers",
                .id             = -1,
                .parent         = &clk_p,
diff --git a/arch/arm/mach-s5p6440/include/mach/irqs.h b/arch/arm/mach-s5p6440/include/mach/irqs.h
index a4b9b40d18f2..911854d9ad42 100644
--- a/arch/arm/mach-s5p6440/include/mach/irqs.h
+++ b/arch/arm/mach-s5p6440/include/mach/irqs.h
@@ -72,7 +72,14 @@
 #define S5P_IRQ_EINT_BASE       (S5P_IRQ_VIC1(31) + 6)
 #define S5P_EINT(x)             ((x) + S5P_IRQ_EINT_BASE)
-#define IRQ_EINT(x)             S5P_EINT(x)
+#define S5P_EINT_BASE1          (S5P_IRQ_EINT_BASE)
+/*
+ * S5P6440 has 0-15 external interrupts in group 0. Only these can be used
+ * to wake up from sleep. If request is beyond this range, by mistake, a large
+ * return value for an irq number should be indication of something amiss.
+ */
+#define S5P_EINT_BASE2          (0xf0000000)
 /*
 * Next the external interrupt groups. These are similar to the IRQ_EINT(x)
diff --git a/arch/arm/mach-s5p6442/include/mach/irqs.h b/arch/arm/mach-s5p6442/include/mach/irqs.h
index da665809f6e4..02c23749c023 100644
--- a/arch/arm/mach-s5p6442/include/mach/irqs.h
+++ b/arch/arm/mach-s5p6442/include/mach/irqs.h
@@ -77,8 +77,9 @@
 #define S5P_IRQ_EINT_BASE       (IRQ_VIC_END + 1)
-#define IRQ_EINT(x)             ((x) < 16 ? S5P_IRQ_VIC0(x) : \
+#define S5P_EINT_BASE1          (S5P_IRQ_VIC0(0))
-                                        (S5P_IRQ_EINT_BASE + (x)-16))
+#define S5P_EINT_BASE2          (S5P_IRQ_EINT_BASE)
 /* Set the default NR_IRQS */
 #define NR_IRQS                 (IRQ_EINT(31) + 1)
diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
index 15066df3ced9..28aa551dc3a8 100644
--- a/arch/arm/mach-s5pc100/include/mach/irqs.h
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -100,9 +100,6 @@
 #define S5P_EINT_BASE1          (S5P_IRQ_VIC0(0))
 #define S5P_EINT_BASE2          (IRQ_VIC_END + 1)
-#define IRQ_EINT(x)             ((x) < 16 ? S5P_IRQ_VIC0(x) : \
-                                 (S5P_EINT_BASE2 + (x) - 16))
 #define S3C_IRQ_GPIO_BASE       (IRQ_EINT(31) + 1)
 #define S3C_IRQ_GPIO(x)         (S3C_IRQ_GPIO_BASE + (x))
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
index 763edebdd577..dd6295e1251d 100644
--- a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
@@ -60,12 +60,9 @@
 #define S5PC100EINT30PEND               (S5P_VA_GPIO + 0xF40)
 #define S5P_EINT_PEND(x)                (S5PC100EINT30PEND + ((x) * 0x4))
-#define eint_offset(irq) ((irq) < IRQ_EINT16_31 ? ((irq) - IRQ_EINT(0)) : \
+#define EINT_REG_NR(x)                  (EINT_OFFSET(x) >> 3)
-                          (((irq) - S5P_EINT_BASE2)))
-#define EINT_REG_NR(x)                  (eint_offset(x) >> 3)
+#define eint_irq_to_bit(irq)            (1 << (EINT_OFFSET(irq) & 0x7))
-#define eint_irq_to_bit(irq)            (1 << (eint_offset(irq) & 0x7))
 /* values for S5P_EXTINT0 */
 #define S5P_EXTINT_LOWLEV               (0x00)
diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h
index 92fc6c7fc064..96895378ea27 100644
--- a/arch/arm/mach-s5pv210/include/mach/irqs.h
+++ b/arch/arm/mach-s5pv210/include/mach/irqs.h
@@ -118,22 +118,12 @@
 #define IRQ_MDNIE3              S5P_IRQ_VIC3(8)
 #define IRQ_VIC_END             S5P_IRQ_VIC3(31)
-#define S5P_EINT_16_31_BASE     (IRQ_VIC_END + 1)
+#define S5P_EINT_BASE1          (S5P_IRQ_VIC0(0))
+#define S5P_EINT_BASE2          (IRQ_VIC_END + 1)
-#define EINT_MODE               S3C_GPIO_SFN(0xf)
-#define IRQ_EINT(x)             ((x) < 16 ? ((x) + S5P_IRQ_VIC0(0)) \
-                                        : ((x) + S5P_EINT_16_31_BASE))
 /* Set the default NR_IRQS */
 #define NR_IRQS                 (IRQ_EINT(31) + 1)
-#define EINT_GPIO_0(x)          S5PV210_GPH0(x)
-#define EINT_GPIO_1(x)          S5PV210_GPH1(x)
-#define EINT_GPIO_2(x)          S5PV210_GPH2(x)
-#define EINT_GPIO_3(x)          S5PV210_GPH3(x)
 /* Compatibility */
 #define IRQ_LCD_FIFO            IRQ_LCD0
 #define IRQ_LCD_VSYNC           IRQ_LCD1
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
index 6d068091c36c..49e029b4978a 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
@@ -27,12 +27,9 @@
 #define S5PV210_EINT30PEND              (S5P_VA_GPIO + 0xF40)
 #define S5P_EINT_PEND(x)                (S5PV210_EINT30PEND + ((x) * 0x4))
-#define eint_offset(irq)        ((irq) < IRQ_EINT16_31 ? ((irq) - IRQ_EINT(0)) \
+#define EINT_REG_NR(x)                  (EINT_OFFSET(x) >> 3)
-                                                : ((irq) - S5P_EINT_16_31_BASE))
-#define EINT_REG_NR(x)                  (eint_offset(x) >> 3)
+#define eint_irq_to_bit(irq)            (1 << (EINT_OFFSET(irq) & 0x7))
-#define eint_irq_to_bit(irq)            (1 << (eint_offset(irq) & 0x7))
 /* values for S5P_EXTINT0 */
 #define S5P_EXTINT_LOWLEV               (0x00)
@@ -41,4 +38,11 @@
 #define S5P_EXTINT_RISEEDGE             (0x03)
 #define S5P_EXTINT_BOTHEDGE             (0x04)
+#define EINT_MODE               S3C_GPIO_SFN(0xf)
+#define EINT_GPIO_0(x)          S5PV210_GPH0(x)
+#define EINT_GPIO_1(x)          S5PV210_GPH1(x)
+#define EINT_GPIO_2(x)          S5PV210_GPH2(x)
+#define EINT_GPIO_3(x)          S5PV210_GPH3(x)
 #endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c
index c73ed06b6065..f0394baa11fa 100644
--- a/arch/arm/mach-u300/i2c.c
+++ b/arch/arm/mach-u300/i2c.c
@@ -9,7 +9,7 @@
 */
 #include <linux/kernel.h>
 #include <linux/i2c.h>
-#include <linux/mfd/ab3100.h>
+#include <linux/mfd/abx500.h>
 #include <linux/regulator/machine.h>
 #include <linux/amba/bus.h>
 #include <mach/irqs.h>
@@ -46,6 +46,7 @@
 /* BUCK SLEEP 0xAC: 1.05V, Not used, SLEEP_A and B, Not used */
 #define BUCK_SLEEP_SETTING      0xAC
+#ifdef CONFIG_AB3100_CORE
 static struct regulator_consumer_supply supply_ldo_c[] = {
        {
                .dev_name = "ab3100-codec",
@@ -253,14 +254,68 @@ static struct ab3100_platform_data ab3100_plf_data = {
                LDO_D_SETTING,
        },
 };
+#endif
+#ifdef CONFIG_AB3550_CORE
+static struct abx500_init_settings ab3550_init_settings[] = {
+        {
+                .bank = 0,
+                .reg = AB3550_IMR1,
+                .setting = 0xff
+        },
+        {
+                .bank = 0,
+                .reg = AB3550_IMR2,
+                .setting = 0xff
+        },
+        {
+                .bank = 0,
+                .reg = AB3550_IMR3,
+                .setting = 0xff
+        },
+        {
+                .bank = 0,
+                .reg = AB3550_IMR4,
+                .setting = 0xff
+        },
+        {
+                .bank = 0,
+                .reg = AB3550_IMR5,
+                /* The two most significant bits are not used */
+                .setting = 0x3f
+        },
+};
+static struct ab3550_platform_data ab3550_plf_data = {
+        .irq = {
+                .base = IRQ_AB3550_BASE,
+                .count = (IRQ_AB3550_END - IRQ_AB3550_BASE + 1),
+        },
+        .dev_data = {
+        },
+        .init_settings = ab3550_init_settings,
+        .init_settings_sz = ARRAY_SIZE(ab3550_init_settings),
+};
+#endif
 static struct i2c_board_info __initdata bus0_i2c_board_info[] = {
+#if defined(CONFIG_AB3550_CORE)
+        {
+                .type = "ab3550",
+                .addr = 0x4A,
+                .irq = IRQ_U300_IRQ0_EXT,
+                .platform_data = &ab3550_plf_data,
+        },
+#elif defined(CONFIG_AB3100_CORE)
        {
                .type = "ab3100",
                .addr = 0x48,
                .irq = IRQ_U300_IRQ0_EXT,
                .platform_data = &ab3100_plf_data,
        },
+#else
+        { },
+#endif
 };
 static struct i2c_board_info __initdata bus1_i2c_board_info[] = {
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
index a6867b12773e..09b1b28fa8fd 100644
--- a/arch/arm/mach-u300/include/mach/irqs.h
+++ b/arch/arm/mach-u300/include/mach/irqs.h
@@ -109,6 +109,13 @@
 #define U300_NR_IRQS                    48
 #endif
+#ifdef CONFIG_AB3550_CORE
+#define IRQ_AB3550_BASE                 (U300_NR_IRQS)
+#define IRQ_AB3550_END                  (IRQ_AB3550_BASE + 37)
+#define NR_IRQS                         (IRQ_AB3550_END + 1)
+#else
 #define NR_IRQS U300_NR_IRQS
+#endif
 #endif
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 072196c57263..bb8d7b771817 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -50,7 +50,7 @@ struct pl022_config_chip ab4500_chip_info = {
 static struct spi_board_info u8500_spi_devices[] = {
        {
-                .modalias = "ab4500",
+                .modalias = "ab8500",
                .controller_data = &ab4500_chip_info,
                .max_speed_hz = 12000000,
                .bus_num = 0,
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index 1b2c9890e8b4..6544855af2f1 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -411,7 +411,7 @@ static struct clk_lookup u8500_common_clks[] = {
        CLK(apetraceclk,        "apetrace",     NULL),
        CLK(mcdeclk,    "mcde",         NULL),
        CLK(ipi2clk,    "ipi2",         NULL),
-        CLK(dmaclk,     "dma40",        NULL),
+        CLK(dmaclk,     "dma40.0",      NULL),
        CLK(b2r2clk,    "b2r2",         NULL),
        CLK(tvclk,      "tv",           NULL),
 };
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index d04299f3b6b5..f21c444edd99 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -32,6 +32,7 @@ static struct platform_device *platform_devs[] __initdata = {
        &u8500_gpio_devs[6],
        &u8500_gpio_devs[7],
        &u8500_gpio_devs[8],
+        &u8500_dma40_device,
 };
 /* minimum static i/o mapping required to boot U8500 platforms */
@@ -71,6 +72,9 @@ void __init u8500_init_devices(void)
 {
        ux500_init_devices();
+        if (cpu_is_u8500ed())
+                dma40_u8500ed_fixup();
        /* Register the platform devices */
        platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 20334236afce..822903421943 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -12,9 +12,13 @@
 #include <linux/gpio.h>
 #include <linux/amba/bus.h>
+#include <plat/ste_dma40.h>
 #include <mach/hardware.h>
 #include <mach/setup.h>
+#include "ste-dma40-db8500.h"
 static struct nmk_gpio_platform_data u8500_gpio_data[] = {
        GPIO_DATA("GPIO-0-31", 0),
        GPIO_DATA("GPIO-32-63", 32), /* 37..63 not routed to pin */
@@ -105,3 +109,108 @@ struct platform_device u8500_i2c4_device = {
        .resource       = u8500_i2c4_resources,
        .num_resources  = ARRAY_SIZE(u8500_i2c4_resources),
 };
+static struct resource dma40_resources[] = {
+        [0] = {
+                .start = U8500_DMA_BASE,
+                .end = U8500_DMA_BASE + SZ_4K - 1,
+                .flags = IORESOURCE_MEM,
+                .name = "base",
+        },
+        [1] = {
+                .start = U8500_DMA_LCPA_BASE,
+                .end = U8500_DMA_LCPA_BASE + SZ_4K - 1,
+                .flags = IORESOURCE_MEM,
+                .name = "lcpa",
+        },
+        [2] = {
+                .start = U8500_DMA_LCLA_BASE,
+                .end = U8500_DMA_LCLA_BASE + 16 * 1024 - 1,
+                .flags = IORESOURCE_MEM,
+                .name = "lcla",
+        },
+        [3] = {
+                .start = IRQ_DMA,
+                .end = IRQ_DMA,
+                .flags = IORESOURCE_IRQ}
+};
+/* Default configuration for physcial memcpy */
+struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
+        .channel_type = (STEDMA40_CHANNEL_IN_PHY_MODE |
+                         STEDMA40_LOW_PRIORITY_CHANNEL |
+                         STEDMA40_PCHAN_BASIC_MODE),
+        .dir = STEDMA40_MEM_TO_MEM,
+        .src_info.endianess = STEDMA40_LITTLE_ENDIAN,
+        .src_info.data_width = STEDMA40_BYTE_WIDTH,
+        .src_info.psize = STEDMA40_PSIZE_PHY_1,
+        .dst_info.endianess = STEDMA40_LITTLE_ENDIAN,
+        .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+        .dst_info.psize = STEDMA40_PSIZE_PHY_1,
+};
+/* Default configuration for logical memcpy */
+struct stedma40_chan_cfg dma40_memcpy_conf_log = {
+        .channel_type = (STEDMA40_CHANNEL_IN_LOG_MODE |
+                         STEDMA40_LOW_PRIORITY_CHANNEL |
+                         STEDMA40_LCHAN_SRC_LOG_DST_LOG |
+                         STEDMA40_NO_TIM_FOR_LINK),
+        .dir = STEDMA40_MEM_TO_MEM,
+        .src_info.endianess = STEDMA40_LITTLE_ENDIAN,
+        .src_info.data_width = STEDMA40_BYTE_WIDTH,
+        .src_info.psize = STEDMA40_PSIZE_LOG_1,
+        .dst_info.endianess = STEDMA40_LITTLE_ENDIAN,
+        .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+        .dst_info.psize = STEDMA40_PSIZE_LOG_1,
+};
+/*
+ * Mapping between destination event lines and physical device address.
+ * The event line is tied to a device and therefor the address is constant.
+ */
+static const dma_addr_t dma40_tx_map[STEDMA40_NR_DEV];
+/* Mapping between source event lines and physical device address */
+static const dma_addr_t dma40_rx_map[STEDMA40_NR_DEV];
+/* Reserved event lines for memcpy only */
+static int dma40_memcpy_event[] = {
+        STEDMA40_MEMCPY_TX_1,
+        STEDMA40_MEMCPY_TX_2,
+        STEDMA40_MEMCPY_TX_3,
+        STEDMA40_MEMCPY_TX_4,
+};
+static struct stedma40_platform_data dma40_plat_data = {
+        .dev_len = STEDMA40_NR_DEV,
+        .dev_rx = dma40_rx_map,
+        .dev_tx = dma40_tx_map,
+        .memcpy = dma40_memcpy_event,
+        .memcpy_len = ARRAY_SIZE(dma40_memcpy_event),
+        .memcpy_conf_phy = &dma40_memcpy_conf_phy,
+        .memcpy_conf_log = &dma40_memcpy_conf_log,
+        .llis_per_log = 8,
+};
+struct platform_device u8500_dma40_device = {
+        .dev = {
+                .platform_data = &dma40_plat_data,
+        },
+        .name = "dma40",
+        .id = 0,
+        .num_resources = ARRAY_SIZE(dma40_resources),
+        .resource = dma40_resources
+};
+void dma40_u8500ed_fixup(void)
+{
+        dma40_plat_data.memcpy = NULL;
+        dma40_plat_data.memcpy_len = 0;
+        dma40_resources[0].start = U8500_DMA_BASE_ED;
+        dma40_resources[0].end = U8500_DMA_BASE_ED + SZ_4K - 1;
+}
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h
index 9169e1e382a3..85fc6a80b386 100644
--- a/arch/arm/mach-ux500/include/mach/db8500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h
@@ -7,6 +7,18 @@
 #ifndef __MACH_DB8500_REGS_H
 #define __MACH_DB8500_REGS_H
+/* Base address and bank offsets for ESRAM */
+#define U8500_ESRAM_BASE        0x40000000
+#define U8500_ESRAM_BANK_SIZE   0x00020000
+#define U8500_ESRAM_BANK0       U8500_ESRAM_BASE
+#define U8500_ESRAM_BANK1       (U8500_ESRAM_BASE + U8500_ESRAM_BANK_SIZE)
+#define U8500_ESRAM_BANK2       (U8500_ESRAM_BANK1 + U8500_ESRAM_BANK_SIZE)
+#define U8500_ESRAM_BANK3       (U8500_ESRAM_BANK2 + U8500_ESRAM_BANK_SIZE)
+#define U8500_ESRAM_BANK4       (U8500_ESRAM_BANK3 + U8500_ESRAM_BANK_SIZE)
+/* Use bank 4 for DMA LCLA and LCPA */
+#define U8500_DMA_LCLA_BASE     U8500_ESRAM_BANK4
+#define U8500_DMA_LCPA_BASE     (U8500_ESRAM_BANK4 + 0x4000)
 #define U8500_PER3_BASE         0x80000000
 #define U8500_STM_BASE          0x80100000
 #define U8500_STM_REG_BASE      (U8500_STM_BASE + 0xF000)
diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h
index 0422af00a56e..c2b2f2574947 100644
--- a/arch/arm/mach-ux500/include/mach/devices.h
+++ b/arch/arm/mach-ux500/include/mach/devices.h
@@ -25,5 +25,8 @@ extern struct platform_device ux500_i2c3_device;
 extern struct platform_device u8500_i2c0_device;
 extern struct platform_device u8500_i2c4_device;
+extern struct platform_device u8500_dma40_device;
+void dma40_u8500ed_fixup(void);
 #endif
diff --git a/arch/arm/mach-ux500/ste-dma40-db8500.h b/arch/arm/mach-ux500/ste-dma40-db8500.h
new file mode 100644
index 000000000000..e7016278dfa9
--- /dev/null
+++ b/arch/arm/mach-ux500/ste-dma40-db8500.h
@@ -0,0 +1,154 @@
+/*
+ * arch/arm/mach-ux500/ste_dma40_db8500.h
+ * DB8500-SoC-specific configuration for DMA40
+ *
+ * Copyright (C) ST-Ericsson 2007-2010
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Per Friden <per.friden@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ */
+#ifndef STE_DMA40_DB8500_H
+#define STE_DMA40_DB8500_H
+#define STEDMA40_NR_DEV 64
+enum dma_src_dev_type {
+        STEDMA40_DEV_SPI0_RX = 0,
+        STEDMA40_DEV_SD_MMC0_RX = 1,
+        STEDMA40_DEV_SD_MMC1_RX = 2,
+        STEDMA40_DEV_SD_MMC2_RX = 3,
+        STEDMA40_DEV_I2C1_RX = 4,
+        STEDMA40_DEV_I2C3_RX = 5,
+        STEDMA40_DEV_I2C2_RX = 6,
+        STEDMA40_DEV_I2C4_RX = 7, /* Only on V1 */
+        STEDMA40_DEV_SSP0_RX = 8,
+        STEDMA40_DEV_SSP1_RX = 9,
+        STEDMA40_DEV_MCDE_RX = 10,
+        STEDMA40_DEV_UART2_RX = 11,
+        STEDMA40_DEV_UART1_RX = 12,
+        STEDMA40_DEV_UART0_RX = 13,
+        STEDMA40_DEV_MSP2_RX = 14,
+        STEDMA40_DEV_I2C0_RX = 15,
+        STEDMA40_DEV_USB_OTG_IEP_8 = 16,
+        STEDMA40_DEV_USB_OTG_IEP_1_9 = 17,
+        STEDMA40_DEV_USB_OTG_IEP_2_10 = 18,
+        STEDMA40_DEV_USB_OTG_IEP_3_11 = 19,
+        STEDMA40_DEV_SLIM0_CH0_RX_HSI_RX_CH0 = 20,
+        STEDMA40_DEV_SLIM0_CH1_RX_HSI_RX_CH1 = 21,
+        STEDMA40_DEV_SLIM0_CH2_RX_HSI_RX_CH2 = 22,
+        STEDMA40_DEV_SLIM0_CH3_RX_HSI_RX_CH3 = 23,
+        STEDMA40_DEV_SRC_SXA0_RX_TX = 24,
+        STEDMA40_DEV_SRC_SXA1_RX_TX = 25,
+        STEDMA40_DEV_SRC_SXA2_RX_TX = 26,
+        STEDMA40_DEV_SRC_SXA3_RX_TX = 27,
+        STEDMA40_DEV_SD_MM2_RX = 28,
+        STEDMA40_DEV_SD_MM0_RX = 29,
+        STEDMA40_DEV_MSP1_RX = 30,
+        /*
+         * This channel is either SlimBus or MSP,
+         * never both at the same time.
+         */
+        STEDMA40_SLIM0_CH0_RX = 31,
+        STEDMA40_DEV_MSP0_RX = 31,
+        STEDMA40_DEV_SD_MM1_RX = 32,
+        STEDMA40_DEV_SPI2_RX = 33,
+        STEDMA40_DEV_I2C3_RX2 = 34,
+        STEDMA40_DEV_SPI1_RX = 35,
+        STEDMA40_DEV_USB_OTG_IEP_4_12 = 36,
+        STEDMA40_DEV_USB_OTG_IEP_5_13 = 37,
+        STEDMA40_DEV_USB_OTG_IEP_6_14 = 38,
+        STEDMA40_DEV_USB_OTG_IEP_7_15 = 39,
+        STEDMA40_DEV_SPI3_RX = 40,
+        STEDMA40_DEV_SD_MM3_RX = 41,
+        STEDMA40_DEV_SD_MM4_RX = 42,
+        STEDMA40_DEV_SD_MM5_RX = 43,
+        STEDMA40_DEV_SRC_SXA4_RX_TX = 44,
+        STEDMA40_DEV_SRC_SXA5_RX_TX = 45,
+        STEDMA40_DEV_SRC_SXA6_RX_TX = 46,
+        STEDMA40_DEV_SRC_SXA7_RX_TX = 47,
+        STEDMA40_DEV_CAC1_RX = 48,
+        /* RX channels 49 and 50 are unused */
+        STEDMA40_DEV_MSHC_RX = 51,
+        STEDMA40_DEV_SLIM1_CH0_RX_HSI_RX_CH4 = 52,
+        STEDMA40_DEV_SLIM1_CH1_RX_HSI_RX_CH5 = 53,
+        STEDMA40_DEV_SLIM1_CH2_RX_HSI_RX_CH6 = 54,
+        STEDMA40_DEV_SLIM1_CH3_RX_HSI_RX_CH7 = 55,
+        /* RX channels 56 thru 60 are unused */
+        STEDMA40_DEV_CAC0_RX = 61,
+        /* RX channels 62 and 63 are unused */
+};
+enum dma_dest_dev_type {
+        STEDMA40_DEV_SPI0_TX = 0,
+        STEDMA40_DEV_SD_MMC0_TX = 1,
+        STEDMA40_DEV_SD_MMC1_TX = 2,
+        STEDMA40_DEV_SD_MMC2_TX = 3,
+        STEDMA40_DEV_I2C1_TX = 4,
+        STEDMA40_DEV_I2C3_TX = 5,
+        STEDMA40_DEV_I2C2_TX = 6,
+        STEDMA50_DEV_I2C4_TX = 7, /* Only on V1 */
+        STEDMA40_DEV_SSP0_TX = 8,
+        STEDMA40_DEV_SSP1_TX = 9,
+        /* TX channel 10 is unused */
+        STEDMA40_DEV_UART2_TX = 11,
+        STEDMA40_DEV_UART1_TX = 12,
+        STEDMA40_DEV_UART0_TX= 13,
+        STEDMA40_DEV_MSP2_TX = 14,
+        STEDMA40_DEV_I2C0_TX = 15,
+        STEDMA40_DEV_USB_OTG_OEP_8 = 16,
+        STEDMA40_DEV_USB_OTG_OEP_1_9 = 17,
+        STEDMA40_DEV_USB_OTG_OEP_2_10= 18,
+        STEDMA40_DEV_USB_OTG_OEP_3_11 = 19,
+        STEDMA40_DEV_SLIM0_CH0_TX_HSI_TX_CH0 = 20,
+        STEDMA40_DEV_SLIM0_CH1_TX_HSI_TX_CH1 = 21,
+        STEDMA40_DEV_SLIM0_CH2_TX_HSI_TX_CH2 = 22,
+        STEDMA40_DEV_SLIM0_CH3_TX_HSI_TX_CH3 = 23,
+        STEDMA40_DEV_DST_SXA0_RX_TX = 24,
+        STEDMA40_DEV_DST_SXA1_RX_TX = 25,
+        STEDMA40_DEV_DST_SXA2_RX_TX = 26,
+        STEDMA40_DEV_DST_SXA3_RX_TX = 27,
+        STEDMA40_DEV_SD_MM2_TX = 28,
+        STEDMA40_DEV_SD_MM0_TX = 29,
+        STEDMA40_DEV_MSP1_TX = 30,
+        /*
+         * This channel is either SlimBus or MSP,
+         * never both at the same time.
+         */
+        STEDMA40_SLIM0_CH0_TX = 31,
+        STEDMA40_DEV_MSP0_TX = 31,
+        STEDMA40_DEV_SD_MM1_TX = 32,
+        STEDMA40_DEV_SPI2_TX = 33,
+        /* Secondary I2C3 channel */
+        STEDMA40_DEV_I2C3_TX2 = 34,
+        STEDMA40_DEV_SPI1_TX = 35,
+        STEDMA40_DEV_USB_OTG_OEP_4_12 = 36,
+        STEDMA40_DEV_USB_OTG_OEP_5_13 = 37,
+        STEDMA40_DEV_USB_OTG_OEP_6_14 = 38,
+        STEDMA40_DEV_USB_OTG_OEP_7_15 = 39,
+        STEDMA40_DEV_SPI3_TX = 40,
+        STEDMA40_DEV_SD_MM3_TX = 41,
+        STEDMA40_DEV_SD_MM4_TX = 42,
+        STEDMA40_DEV_SD_MM5_TX = 43,
+        STEDMA40_DEV_DST_SXA4_RX_TX = 44,
+        STEDMA40_DEV_DST_SXA5_RX_TX = 45,
+        STEDMA40_DEV_DST_SXA6_RX_TX = 46,
+        STEDMA40_DEV_DST_SXA7_RX_TX = 47,
+        STEDMA40_DEV_CAC1_TX = 48,
+        STEDMA40_DEV_CAC1_TX_HAC1_TX = 49,
+        STEDMA40_DEV_HAC1_TX = 50,
+        STEDMA40_MEMXCPY_TX_0 = 51,
+        STEDMA40_DEV_SLIM1_CH0_TX_HSI_TX_CH4 = 52,
+        STEDMA40_DEV_SLIM1_CH1_TX_HSI_TX_CH5 = 53,
+        STEDMA40_DEV_SLIM1_CH2_TX_HSI_TX_CH6 = 54,
+        STEDMA40_DEV_SLIM1_CH3_TX_HSI_TX_CH7 = 55,
+        STEDMA40_MEMCPY_TX_1 = 56,
+        STEDMA40_MEMCPY_TX_2 = 57,
+        STEDMA40_MEMCPY_TX_3 = 58,
+        STEDMA40_MEMCPY_TX_4 = 59,
+        STEDMA40_MEMCPY_TX_5 = 60,
+        STEDMA40_DEV_CAC0_TX = 61,
+        STEDMA40_DEV_CAC0_TX_HAC0_TX = 62,
+        STEDMA40_DEV_HAC0_TX = 63,
+};
+#endif
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 902ba9e42c5b..20b2e79e54f2 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -1,5 +1,7 @@
 if ARCH_MXC
+source "arch/arm/plat-mxc/devices/Kconfig"
 menu "Freescale MXC Implementations"
 choice
@@ -8,15 +10,12 @@ choice
 config ARCH_MX1
        bool "MX1-based"
-        select CPU_ARM920T
+        select SOC_IMX1
-        select IMX_HAVE_IOMUX_V1
        help
          This enables support for systems based on the Freescale i.MX1 family
 config ARCH_MX2
        bool "MX2-based"
-        select CPU_ARM926T
-        select IMX_HAVE_IOMUX_V1
        help
          This enables support for systems based on the Freescale i.MX2 family
@@ -49,8 +48,7 @@ config ARCH_MX5
 endchoice
-source "arch/arm/mach-mx1/Kconfig"
+source "arch/arm/mach-imx/Kconfig"
-source "arch/arm/mach-mx2/Kconfig"
 source "arch/arm/mach-mx3/Kconfig"
 source "arch/arm/mach-mx25/Kconfig"
 source "arch/arm/mach-mxc91231/Kconfig"
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 895bc3c5e0c0..c7506a80eb31 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -8,8 +8,6 @@ obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o
 # MX51 uses the TZIC interrupt controller, older platforms use AVIC (irq.o)
 obj-$(CONFIG_MXC_TZIC) += tzic.o
-obj-$(CONFIG_ARCH_MX1) += dma-mx1-mx2.o
-obj-$(CONFIG_ARCH_MX2) += dma-mx1-mx2.o
 obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
 obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
 obj-$(CONFIG_MXC_PWM)  += pwm.o
@@ -21,3 +19,5 @@ ifdef CONFIG_SND_IMX_SOC
 obj-y += ssi-fiq.o
 obj-y += ssi-fiq-ksym.o
 endif
+obj-y += devices/
diff --git a/arch/arm/plat-mxc/audmux-v1.c b/arch/arm/plat-mxc/audmux-v1.c
index b62917ca3f95..1180bef7664b 100644
--- a/arch/arm/plat-mxc/audmux-v1.c
+++ b/arch/arm/plat-mxc/audmux-v1.c
@@ -13,10 +13,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 #include <linux/module.h>
diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c
index ab94d78a927f..f9e7cdbd0005 100644
--- a/arch/arm/plat-mxc/audmux-v2.c
+++ b/arch/arm/plat-mxc/audmux-v2.c
@@ -13,10 +13,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 #include <linux/module.h>
diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c
index 56f2fb5cc456..735776d84956 100644
--- a/arch/arm/plat-mxc/devices.c
+++ b/arch/arm/plat-mxc/devices.c
@@ -18,6 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/err.h>
 #include <linux/platform_device.h>
 #include <mach/common.h>
@@ -35,3 +36,35 @@ int __init mxc_register_device(struct platform_device *pdev, void *data)
        return ret;
 }
+struct platform_device *__init imx_add_platform_device(const char *name, int id,
+                const struct resource *res, unsigned int num_resources,
+                const void *data, size_t size_data)
+{
+        int ret = -ENOMEM;
+        struct platform_device *pdev;
+        pdev = platform_device_alloc(name, id);
+        if (!pdev)
+                goto err;
+        if (res) {
+                ret = platform_device_add_resources(pdev, res, num_resources);
+                if (ret)
+                        goto err;
+        }
+        if (data) {
+                ret = platform_device_add_data(pdev, data, size_data);
+                if (ret)
+                        goto err;
+        }
+        ret = platform_device_add(pdev);
+        if (ret) {
+err:
+                platform_device_put(pdev);
+                return ERR_PTR(ret);
+        }
+        return pdev;
+}
diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig
new file mode 100644
index 000000000000..09230f8c802a
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/Kconfig
@@ -0,0 +1,11 @@
+config IMX_HAVE_PLATFORM_IMX_I2C
+        bool
+config IMX_HAVE_PLATFORM_IMX_UART
+        bool
+config IMX_HAVE_PLATFORM_MXC_NAND
+        bool
+config IMX_HAVE_PLATFORM_SPI_IMX
+        bool
diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile
new file mode 100644
index 000000000000..5ecbb244d210
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) +=  platform-spi_imx.o
diff --git a/arch/arm/plat-mxc/devices/platform-imx-i2c.c b/arch/arm/plat-mxc/devices/platform-imx-i2c.c
new file mode 100644
index 000000000000..d0af9f7d8aed
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-imx-i2c.c
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/devices-common.h>
+struct platform_device *__init imx_add_imx_i2c(int id,
+                resource_size_t iobase, resource_size_t iosize, int irq,
+                const struct imxi2c_platform_data *pdata)
+{
+        struct resource res[] = {
+                {
+                        .start = iobase,
+                        .end = iobase + iosize - 1,
+                        .flags = IORESOURCE_MEM,
+                }, {
+                        .start = irq,
+                        .end = irq,
+                        .flags = IORESOURCE_IRQ,
+                },
+        };
+        return imx_add_platform_device("imx-i2c", id, res, ARRAY_SIZE(res),
+                        pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/plat-mxc/devices/platform-imx-uart.c
new file mode 100644
index 000000000000..fa3dff1433e8
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-imx-uart.c
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/devices-common.h>
+struct platform_device *__init imx_add_imx_uart_3irq(int id,
+                resource_size_t iobase, resource_size_t iosize,
+                resource_size_t irqrx, resource_size_t irqtx,
+                resource_size_t irqrts,
+                const struct imxuart_platform_data *pdata)
+{
+        struct resource res[] = {
+                {
+                        .start = iobase,
+                        .end = iobase + iosize - 1,
+                        .flags = IORESOURCE_MEM,
+                }, {
+                        .start = irqrx,
+                        .end = irqrx,
+                        .flags = IORESOURCE_IRQ,
+                }, {
+                        .start = irqtx,
+                        .end = irqtx,
+                        .flags = IORESOURCE_IRQ,
+                }, {
+                        .start = irqrts,
+                        .end = irqrx,
+                        .flags = IORESOURCE_IRQ,
+                },
+        };
+        return imx_add_platform_device("imx-uart", id, res, ARRAY_SIZE(res),
+                        pdata, sizeof(*pdata));
+}
+struct platform_device *__init imx_add_imx_uart_1irq(int id,
+                resource_size_t iobase, resource_size_t iosize,
+                resource_size_t irq,
+                const struct imxuart_platform_data *pdata)
+{
+        struct resource res[] = {
+                {
+                        .start = iobase,
+                        .end = iobase + iosize - 1,
+                        .flags = IORESOURCE_MEM,
+                }, {
+                        .start = irq,
+                        .end = irq,
+                        .flags = IORESOURCE_IRQ,
+                },
+        };
+        return imx_add_platform_device("imx-uart", id, res, ARRAY_SIZE(res),
+                        pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-mxc_nand.c b/arch/arm/plat-mxc/devices/platform-mxc_nand.c
new file mode 100644
index 000000000000..1c286418d123
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-mxc_nand.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+#include <mach/devices-common.h>
+static struct platform_device *__init imx_add_mxc_nand(resource_size_t iobase,
+                int irq, const struct mxc_nand_platform_data *pdata,
+                resource_size_t iosize)
+{
+        static int id = 0;
+        
+        struct resource res[] = {
+                {
+                        .start = iobase,
+                        .end = iobase + iosize - 1,
+                        .flags = IORESOURCE_MEM,
+                }, {
+                        .start = irq,
+                        .end = irq,
+                        .flags = IORESOURCE_IRQ,
+                },
+        };
+        return imx_add_platform_device("mxc_nand", id++, res, ARRAY_SIZE(res),
+                        pdata, sizeof(*pdata));
+}
+struct platform_device *__init imx_add_mxc_nand_v1(resource_size_t iobase,
+                int irq, const struct mxc_nand_platform_data *pdata)
+{
+        return imx_add_mxc_nand(iobase, irq, pdata, SZ_4K);
+}
+struct platform_device *__init imx_add_mxc_nand_v21(resource_size_t iobase,
+                int irq, const struct mxc_nand_platform_data *pdata)
+{
+        return imx_add_mxc_nand(iobase, irq, pdata, SZ_8K);
+}
diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c
new file mode 100644
index 000000000000..2831a6d3eb4b
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+#include <mach/devices-common.h>
+struct platform_device *__init imx_add_spi_imx(int id,
+                resource_size_t iobase, resource_size_t iosize, int irq,
+                const struct spi_imx_master *pdata)
+{
+        struct resource res[] = {
+                {
+                        .start = iobase,
+                        .end = iobase + iosize - 1,
+                        .flags = IORESOURCE_MEM,
+                }, {
+                        .start = irq,
+                        .end = irq,
+                        .flags = IORESOURCE_IRQ,
+                },
+        };
+        return imx_add_platform_device("spi_imx", id, res, ARRAY_SIZE(res),
+                        pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c
index 618479258bb6..35a064ff02ba 100644
--- a/arch/arm/plat-mxc/ehci.c
+++ b/arch/arm/plat-mxc/ehci.c
@@ -11,10 +11,6 @@
 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
 * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 #include <linux/platform_device.h>
diff --git a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
deleted file mode 100644
index 0376c133c9f4..000000000000
--- a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>.
- * All Rights Reserved.
- */
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
-#define __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
index a1fd5830af48..45b2fb8bed61 100644
--- a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
+++ b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
@@ -25,7 +25,7 @@
 #ifndef __ASSEMBLY__
 /*
 * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
+ * its own devices, it calls the baseboard's init function.
 * TODO: Add your own baseboard init function and call it from
 * inside eukrea_cpuimx27_init().
 *
diff --git a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
deleted file mode 100644
index 93cc66f104c7..000000000000
--- a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  Copyright (C) 2009  Yoichi Yuasa <yuasa@linux-mips.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-#ifndef __ARM_ARCH_BOARD_KZM_ARM11_H
-#define __ARM_ARCH_BOARD_KZM_ARM11_H
-/*
- *  KZM-ARM11-01 Board Control Registers on FPGA
- */
-#define KZM_ARM11_CTL1          (MX31_CS4_BASE_ADDR + 0x1000)
-#define KZM_ARM11_CTL2          (MX31_CS4_BASE_ADDR + 0x1001)
-#define KZM_ARM11_RSW1          (MX31_CS4_BASE_ADDR + 0x1002)
-#define KZM_ARM11_BACK_LIGHT    (MX31_CS4_BASE_ADDR + 0x1004)
-#define KZM_ARM11_FPGA_REV      (MX31_CS4_BASE_ADDR + 0x1008)
-#define KZM_ARM11_7SEG_LED      (MX31_CS4_BASE_ADDR + 0x1010)
-#define KZM_ARM11_LEDS          (MX31_CS4_BASE_ADDR + 0x1020)
-#define KZM_ARM11_DIPSW2        (MX31_CS4_BASE_ADDR + 0x1003)
-/*
- * External UART for touch panel on FPGA
- */
-#define KZM_ARM11_16550         (MX31_CS4_BASE_ADDR + 0x1050)
-#endif /* __ARM_ARCH_BOARD_KZM_ARM11_H */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx21ads.h b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
deleted file mode 100644
index 0cf4fa29510c..000000000000
--- a/arch/arm/plat-mxc/include/mach/board-mx21ads.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_ARCH_MXC_BOARD_MX21ADS_H__
-#define __ASM_ARCH_MXC_BOARD_MX21ADS_H__
-/*
- * Memory-mapped I/O on MX21ADS base board
- */
-#define MX21ADS_MMIO_BASE_ADDR   0xF5000000
-#define MX21ADS_MMIO_SIZE        SZ_16M
-#define MX21ADS_REG_ADDR(offset)    (void __force __iomem *) \
-                (MX21ADS_MMIO_BASE_ADDR + (offset))
-#define MX21ADS_CS8900A_IRQ         IRQ_GPIOE(11)
-#define MX21ADS_CS8900A_IOBASE_REG  MX21ADS_REG_ADDR(0x000000)
-#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
-#define MX21ADS_VERSION_REG         MX21ADS_REG_ADDR(0x400000)
-#define MX21ADS_IO_REG              MX21ADS_REG_ADDR(0x800000)
-/* MX21ADS_IO_REG bit definitions */
-#define MX21ADS_IO_SD_WP        0x0001 /* read */
-#define MX21ADS_IO_TP6          0x0001 /* write */
-#define MX21ADS_IO_SW_SEL       0x0002 /* read */
-#define MX21ADS_IO_TP7          0x0002 /* write */
-#define MX21ADS_IO_RESET_E_UART 0x0004
-#define MX21ADS_IO_RESET_BASE   0x0008
-#define MX21ADS_IO_CSI_CTL2     0x0010
-#define MX21ADS_IO_CSI_CTL1     0x0020
-#define MX21ADS_IO_CSI_CTL0     0x0040
-#define MX21ADS_IO_UART1_EN     0x0080
-#define MX21ADS_IO_UART4_EN     0x0100
-#define MX21ADS_IO_LCDON        0x0200
-#define MX21ADS_IO_IRDA_EN      0x0400
-#define MX21ADS_IO_IRDA_FIR_SEL 0x0800
-#define MX21ADS_IO_IRDA_MD0_B   0x1000
-#define MX21ADS_IO_IRDA_MD1     0x2000
-#define MX21ADS_IO_LED4_ON      0x4000
-#define MX21ADS_IO_LED3_ON      0x8000
-#endif                          /* __ASM_ARCH_MXC_BOARD_MX21ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
deleted file mode 100644
index 7776d230327f..000000000000
--- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h
+++ /dev/null
@@ -1,344 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_ARCH_MXC_BOARD_MX27ADS_H__
-#define __ASM_ARCH_MXC_BOARD_MX27ADS_H__
-/* external interrupt multiplexer */
-#define MXC_EXP_IO_BASE         (MXC_BOARD_IRQ_START)
-#define MXC_VIRTUAL_INTS_BASE   (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES)
-#define MXC_SDIO1_CARD_IRQ      MXC_VIRTUAL_INTS_BASE
-#define MXC_SDIO2_CARD_IRQ      (MXC_VIRTUAL_INTS_BASE + 1)
-#define MXC_SDIO3_CARD_IRQ      (MXC_VIRTUAL_INTS_BASE + 2)
-#define MXC_MAX_BOARD_INTS      (MXC_MAX_EXP_IO_LINES + \
-                                MXC_MAX_VIRTUAL_INTS)
-/*
- * @name Memory Size parameters
- */
-/*
- * Size of SDRAM memory
- */
-#define SDRAM_MEM_SIZE          SZ_128M
-/*
- * PBC Controller parameters
- */
-/*
- * Base address of PBC controller, CS4
- */
-#define PBC_BASE_ADDRESS        0xf4300000
-#define PBC_REG_ADDR(offset)    (void __force __iomem *) \
-                (PBC_BASE_ADDRESS + (offset))
-/*
- * PBC Interupt name definitions
- */
-#define PBC_GPIO1_0  0
-#define PBC_GPIO1_1  1
-#define PBC_GPIO1_2  2
-#define PBC_GPIO1_3  3
-#define PBC_GPIO1_4  4
-#define PBC_GPIO1_5  5
-#define PBC_INTR_MAX_NUM 6
-#define PBC_INTR_SHARED_MAX_NUM 8
-/* When the PBC address connection is fixed in h/w, defined as 1 */
-#define PBC_ADDR_SH             0
-/* Offsets for the PBC Controller register */
-/*
- * PBC Board version register offset
- */
-#define PBC_VERSION_REG         PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 1 set address.
- */
-#define PBC_BCTRL1_SET_REG      PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 1 clear address.
- */
-#define PBC_BCTRL1_CLEAR_REG    PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH)
-/*
- * PBC Board control register 2 set address.
- */
-#define PBC_BCTRL2_SET_REG      PBC_REG_ADDR(0x00010 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 2 clear address.
- */
-#define PBC_BCTRL2_CLEAR_REG    PBC_REG_ADDR(0x00014 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 3 set address.
- */
-#define PBC_BCTRL3_SET_REG      PBC_REG_ADDR(0x00018 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 3 clear address.
- */
-#define PBC_BCTRL3_CLEAR_REG    PBC_REG_ADDR(0x0001C >> PBC_ADDR_SH)
-/*
- * PBC Board control register 3 set address.
- */
-#define PBC_BCTRL4_SET_REG      PBC_REG_ADDR(0x00020 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 4 clear address.
- */
-#define PBC_BCTRL4_CLEAR_REG    PBC_REG_ADDR(0x00024 >> PBC_ADDR_SH)
-/*PBC_ADDR_SH
- * PBC Board status register 1.
- */
-#define PBC_BSTAT1_REG          PBC_REG_ADDR(0x00028 >> PBC_ADDR_SH)
-/*
- * PBC Board interrupt status register.
- */
-#define PBC_INTSTATUS_REG       PBC_REG_ADDR(0x0002C >> PBC_ADDR_SH)
-/*
- * PBC Board interrupt current status register.
- */
-#define PBC_INTCURR_STATUS_REG  PBC_REG_ADDR(0x00034 >> PBC_ADDR_SH)
-/*
- * PBC Interrupt mask register set address.
- */
-#define PBC_INTMASK_SET_REG     PBC_REG_ADDR(0x00038 >> PBC_ADDR_SH)
-/*
- * PBC Interrupt mask register clear address.
- */
-#define PBC_INTMASK_CLEAR_REG   PBC_REG_ADDR(0x0003C >> PBC_ADDR_SH)
-/*
- * External UART A.
- */
-#define PBC_SC16C652_UARTA_REG  PBC_REG_ADDR(0x20000 >> PBC_ADDR_SH)
-/*
- * UART 4 Expanding Signal Status.
- */
-#define PBC_UART_STATUS_REG     PBC_REG_ADDR(0x22000 >> PBC_ADDR_SH)
-/*
- * UART 4 Expanding Signal Control Set.
- */
-#define PBC_UCTRL_SET_REG       PBC_REG_ADDR(0x24000 >> PBC_ADDR_SH)
-/*
- * UART 4 Expanding Signal Control Clear.
- */
-#define PBC_UCTRL_CLR_REG       PBC_REG_ADDR(0x26000 >> PBC_ADDR_SH)
-/*
- * Ethernet Controller IO base address.
- */
-#define PBC_CS8900A_IOBASE_REG  PBC_REG_ADDR(0x40000 >> PBC_ADDR_SH)
-/*
- * Ethernet Controller Memory base address.
- */
-#define PBC_CS8900A_MEMBASE_REG PBC_REG_ADDR(0x42000 >> PBC_ADDR_SH)
-/*
- * Ethernet Controller DMA base address.
- */
-#define PBC_CS8900A_DMABASE_REG PBC_REG_ADDR(0x44000 >> PBC_ADDR_SH)
-/* PBC Board Version Register bit definition */
-#define PBC_VERSION_ADS         0x8000  /* Bit15=1 means version for ads */
-#define PBC_VERSION_EVB_REVB    0x4000  /* BIT14=1 means version for evb revb */
-/* PBC Board Control Register 1 bit definitions */
-#define PBC_BCTRL1_ERST         0x0001  /* Ethernet Reset */
-#define PBC_BCTRL1_URST         0x0002  /* Reset External UART controller */
-#define PBC_BCTRL1_FRST         0x0004  /* FEC Reset */
-#define PBC_BCTRL1_ESLEEP       0x0010  /* Enable ethernet Sleep */
-#define PBC_BCTRL1_LCDON        0x0800  /* Enable the LCD */
-/* PBC Board Control Register 2 bit definitions */
-#define PBC_BCTRL2_VCC_EN       0x0004  /*   Enable VCC */
-#define PBC_BCTRL2_VPP_EN       0x0008  /*   Enable Vpp */
-#define PBC_BCTRL2_ATAFEC_EN    0X0010
-#define PBC_BCTRL2_ATAFEC_SEL   0X0020
-#define PBC_BCTRL2_ATA_EN       0X0040
-#define PBC_BCTRL2_IRDA_SD      0X0080
-#define PBC_BCTRL2_IRDA_EN      0X0100
-#define PBC_BCTRL2_CCTL10       0X0200
-#define PBC_BCTRL2_CCTL11       0X0400
-/* PBC Board Control Register 3 bit definitions */
-#define PBC_BCTRL3_HSH_EN       0X0020
-#define PBC_BCTRL3_FSH_MOD      0X0040
-#define PBC_BCTRL3_OTG_HS_EN    0X0080
-#define PBC_BCTRL3_OTG_VBUS_EN  0X0100
-#define PBC_BCTRL3_FSH_VBUS_EN  0X0200
-#define PBC_BCTRL3_USB_OTG_ON   0X0800
-#define PBC_BCTRL3_USB_FSH_ON   0X1000
-/* PBC Board Control Register 4 bit definitions */
-#define PBC_BCTRL4_REGEN_SEL    0X0001
-#define PBC_BCTRL4_USER_OFF     0X0002
-#define PBC_BCTRL4_VIB_EN       0X0004
-#define PBC_BCTRL4_PWRGT1_EN    0X0008
-#define PBC_BCTRL4_PWRGT2_EN    0X0010
-#define PBC_BCTRL4_STDBY_PRI    0X0020
-#ifndef __ASSEMBLY__
-/*
- * Enumerations for SD cards and memory stick card. This corresponds to
- * the card EN bits in the IMR: SD1_EN | MS_EN | SD3_EN | SD2_EN.
- */
-enum mxc_card_no {
-        MXC_CARD_SD2 = 0,
-        MXC_CARD_SD3,
-        MXC_CARD_MS,
-        MXC_CARD_SD1,
-        MXC_CARD_MIN = MXC_CARD_SD2,
-        MXC_CARD_MAX = MXC_CARD_SD1,
-};
-#endif
-#define MXC_CPLD_VER_1_50       0x01
-/*
- * PBC BSTAT Register bit definitions
- */
-#define PBC_BSTAT_PRI_INT       0X0001
-#define PBC_BSTAT_USB_BYP       0X0002
-#define PBC_BSTAT_ATA_IOCS16    0X0004
-#define PBC_BSTAT_ATA_CBLID     0X0008
-#define PBC_BSTAT_ATA_DASP      0X0010
-#define PBC_BSTAT_PWR_RDY       0X0020
-#define PBC_BSTAT_SD3_WP        0X0100
-#define PBC_BSTAT_SD2_WP        0X0200
-#define PBC_BSTAT_SD1_WP        0X0400
-#define PBC_BSTAT_SD3_DET       0X0800
-#define PBC_BSTAT_SD2_DET       0X1000
-#define PBC_BSTAT_SD1_DET       0X2000
-#define PBC_BSTAT_MS_DET        0X4000
-#define PBC_BSTAT_SD3_DET_BIT   11
-#define PBC_BSTAT_SD2_DET_BIT   12
-#define PBC_BSTAT_SD1_DET_BIT   13
-#define PBC_BSTAT_MS_DET_BIT    14
-#define MXC_BSTAT_BIT(n)        ((n == MXC_CARD_SD2) ? PBC_BSTAT_SD2_DET : \
-                                 ((n == MXC_CARD_SD3) ? PBC_BSTAT_SD3_DET : \
-                                 ((n == MXC_CARD_SD1) ? PBC_BSTAT_SD1_DET : \
-                                 ((n == MXC_CARD_MS) ? PBC_BSTAT_MS_DET : \
-                                        0x0))))
-/*
- * PBC UART Control Register bit definitions
- */
-#define PBC_UCTRL_DCE_DCD       0X0001
-#define PBC_UCTRL_DCE_DSR       0X0002
-#define PBC_UCTRL_DCE_RI        0X0004
-#define PBC_UCTRL_DTE_DTR       0X0100
-/*
- * PBC UART Status Register bit definitions
- */
-#define PBC_USTAT_DTE_DCD       0X0001
-#define PBC_USTAT_DTE_DSR       0X0002
-#define PBC_USTAT_DTE_RI        0X0004
-#define PBC_USTAT_DCE_DTR       0X0100
-/*
- * PBC Interupt mask register bit definitions
- */
-#define PBC_INTR_SD3_R_EN_BIT   4
-#define PBC_INTR_SD2_R_EN_BIT   0
-#define PBC_INTR_SD1_R_EN_BIT   6
-#define PBC_INTR_MS_R_EN_BIT    5
-#define PBC_INTR_SD3_EN_BIT     13
-#define PBC_INTR_SD2_EN_BIT     12
-#define PBC_INTR_MS_EN_BIT      14
-#define PBC_INTR_SD1_EN_BIT     15
-#define PBC_INTR_SD2_R_EN       0x0001
-#define PBC_INTR_LOW_BAT        0X0002
-#define PBC_INTR_OTG_FSOVER     0X0004
-#define PBC_INTR_FSH_OVER       0X0008
-#define PBC_INTR_SD3_R_EN       0x0010
-#define PBC_INTR_MS_R_EN        0x0020
-#define PBC_INTR_SD1_R_EN       0x0040
-#define PBC_INTR_FEC_INT        0X0080
-#define PBC_INTR_ENET_INT       0X0100
-#define PBC_INTR_OTGFS_INT      0X0200
-#define PBC_INTR_XUART_INT      0X0400
-#define PBC_INTR_CCTL12         0X0800
-#define PBC_INTR_SD2_EN         0x1000
-#define PBC_INTR_SD3_EN         0x2000
-#define PBC_INTR_MS_EN          0x4000
-#define PBC_INTR_SD1_EN         0x8000
-/* For interrupts like xuart, enet etc */
-#define EXPIO_PARENT_INT        IOMUX_TO_IRQ(MX27_PIN_TIN)
-#define MXC_MAX_EXP_IO_LINES    16
-/*
- * This corresponds to PBC_INTMASK_SET_REG at offset 0x38.
- *
- */
-#define EXPIO_INT_LOW_BAT       (MXC_EXP_IO_BASE + 1)
-#define EXPIO_INT_OTG_FS_OVR    (MXC_EXP_IO_BASE + 2)
-#define EXPIO_INT_FSH_OVR       (MXC_EXP_IO_BASE + 3)
-#define EXPIO_INT_RES4          (MXC_EXP_IO_BASE + 4)
-#define EXPIO_INT_RES5          (MXC_EXP_IO_BASE + 5)
-#define EXPIO_INT_RES6          (MXC_EXP_IO_BASE + 6)
-#define EXPIO_INT_FEC           (MXC_EXP_IO_BASE + 7)
-#define EXPIO_INT_ENET_INT      (MXC_EXP_IO_BASE + 8)
-#define EXPIO_INT_OTG_FS_INT    (MXC_EXP_IO_BASE + 9)
-#define EXPIO_INT_XUART_INTA    (MXC_EXP_IO_BASE + 10)
-#define EXPIO_INT_CCTL12_INT    (MXC_EXP_IO_BASE + 11)
-#define EXPIO_INT_SD2_EN        (MXC_EXP_IO_BASE + 12)
-#define EXPIO_INT_SD3_EN        (MXC_EXP_IO_BASE + 13)
-#define EXPIO_INT_MS_EN         (MXC_EXP_IO_BASE + 14)
-#define EXPIO_INT_SD1_EN        (MXC_EXP_IO_BASE + 15)
-/*
- * This is System IRQ used by CS8900A for interrupt generation
- * taken from platform.h
- */
-#define CS8900AIRQ              EXPIO_INT_ENET_INT
-/* This is I/O Base address used to access registers of CS8900A on MXC ADS */
-#define CS8900A_BASE_ADDRESS    (PBC_CS8900A_IOBASE_REG + 0x300)
-#define MXC_PMIC_INT_LINE       IOMUX_TO_IRQ(MX27_PIN_TOUT)
-/*
-* This is used to detect if the CPLD version is for mx27 evb board rev-a
-*/
-#define PBC_CPLD_VERSION_IS_REVA() \
-        ((__raw_readw(PBC_VERSION_REG) & \
-        (PBC_VERSION_ADS | PBC_VERSION_EVB_REVB))\
-        == 0)
-/* This is used to active or inactive ata signal in CPLD .
- *  It is dependent with hardware
- */
-#define PBC_ATA_SIGNAL_ACTIVE() \
-        __raw_writew(           \
-                PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \
-                PBC_BCTRL2_CLEAR_REG)
-#define PBC_ATA_SIGNAL_INACTIVE() \
-        __raw_writew(  \
-                PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \
-                PBC_BCTRL2_SET_REG)
-#define MXC_BD_LED1             (1 << 5)
-#define MXC_BD_LED2             (1 << 6)
-#define MXC_BD_LED_ON(led) \
-        __raw_writew(led, PBC_BCTRL1_SET_REG)
-#define MXC_BD_LED_OFF(led) \
-        __raw_writew(led, PBC_BCTRL1_CLEAR_REG)
-/* to determine the correct external crystal reference */
-#define CKIH_27MHZ_BIT_SET      (1 << 3)
-#endif                          /* __ASM_ARCH_MXC_BOARD_MX27ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27lite.h b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
deleted file mode 100644
index ea87551d2736..000000000000
--- a/arch/arm/plat-mxc/include/mach/board-mx27lite.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_MXC_BOARD_MX27LITE_H__
-#define __ASM_ARCH_MXC_BOARD_MX27LITE_H__
-#endif /* __ASM_ARCH_MXC_BOARD_MX27LITE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
deleted file mode 100644
index fec1bcfa9164..000000000000
--- a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_MXC_BOARD_MX27PDK_H__
-#define __ASM_ARCH_MXC_BOARD_MX27PDK_H__
-#endif /* __ASM_ARCH_MXC_BOARD_MX27PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h b/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h
deleted file mode 100644
index da92933a233b..000000000000
--- a/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_MXC_BOARD_MX31_3DS_H__
-#define __ASM_ARCH_MXC_BOARD_MX31_3DS_H__
-/* Definitions for components on the Debug board */
-/* Base address of CPLD controller on the Debug board */
-#define DEBUG_BASE_ADDRESS              CS5_IO_ADDRESS(CS5_BASE_ADDR)
-/* LAN9217 ethernet base address */
-#define LAN9217_BASE_ADDR               CS5_BASE_ADDR
-/* CPLD config and interrupt base address */
-#define CPLD_ADDR                       (DEBUG_BASE_ADDRESS + 0x20000)
-/* LED switchs */
-#define CPLD_LED_REG                    (CPLD_ADDR + 0x00)
-/* buttons */
-#define CPLD_SWITCH_BUTTONS_REG (EXPIO_ADDR + 0x08)
-/* status, interrupt */
-#define CPLD_INT_STATUS_REG             (CPLD_ADDR + 0x10)
-#define CPLD_INT_MASK_REG               (CPLD_ADDR + 0x38)
-#define CPLD_INT_RESET_REG              (CPLD_ADDR + 0x20)
-/* magic word for debug CPLD */
-#define CPLD_MAGIC_NUMBER1_REG          (CPLD_ADDR + 0x40)
-#define CPLD_MAGIC_NUMBER2_REG          (CPLD_ADDR + 0x48)
-/* CPLD code version */
-#define CPLD_CODE_VER_REG               (CPLD_ADDR + 0x50)
-/* magic word for debug CPLD */
-#define CPLD_MAGIC_NUMBER3_REG          (CPLD_ADDR + 0x58)
-/* module reset register */
-#define CPLD_MODULE_RESET_REG           (CPLD_ADDR + 0x60)
-/* CPU ID and Personality ID */
-#define CPLD_MCU_BOARD_ID_REG           (CPLD_ADDR + 0x68)
-/* CPLD IRQ line for external uart, external ethernet etc */
-#define EXPIO_PARENT_INT        IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
-#define MXC_EXP_IO_BASE         (MXC_BOARD_IRQ_START)
-#define MXC_IRQ_TO_EXPIO(irq)   ((irq) - MXC_EXP_IO_BASE)
-#define EXPIO_INT_ENET          (MXC_EXP_IO_BASE + 0)
-#define EXPIO_INT_XUART_A       (MXC_EXP_IO_BASE + 1)
-#define EXPIO_INT_XUART_B       (MXC_EXP_IO_BASE + 2)
-#define EXPIO_INT_BUTTON_A      (MXC_EXP_IO_BASE + 3)
-#define EXPIO_INT_BUTTON_B      (MXC_EXP_IO_BASE + 4)
-#define MXC_MAX_EXP_IO_LINES    16
-#endif /* __ASM_ARCH_MXC_BOARD_MX31_3DS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
deleted file mode 100644
index 095a199591c6..000000000000
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__
-#define __ASM_ARCH_MXC_BOARD_MX31ADS_H__
-#include <mach/hardware.h>
-/* Base address of PBC controller */
-#define PBC_BASE_ADDRESS        MX31_CS4_BASE_ADDR_VIRT
-/* Offsets for the PBC Controller register */
-/* PBC Board status register offset */
-#define PBC_BSTAT               0x000002
-/* PBC Board control register 1 set address */
-#define PBC_BCTRL1_SET          0x000004
-/* PBC Board control register 1 clear address */
-#define PBC_BCTRL1_CLEAR        0x000006
-/* PBC Board control register 2 set address */
-#define PBC_BCTRL2_SET          0x000008
-/* PBC Board control register 2 clear address */
-#define PBC_BCTRL2_CLEAR        0x00000A
-/* PBC Board control register 3 set address */
-#define PBC_BCTRL3_SET          0x00000C
-/* PBC Board control register 3 clear address */
-#define PBC_BCTRL3_CLEAR        0x00000E
-/* PBC Board control register 4 set address */
-#define PBC_BCTRL4_SET          0x000010
-/* PBC Board control register 4 clear address */
-#define PBC_BCTRL4_CLEAR        0x000012
-/* PBC Board status register 1 */
-#define PBC_BSTAT1              0x000014
-/* PBC Board interrupt status register */
-#define PBC_INTSTATUS           0x000016
-/* PBC Board interrupt current status register */
-#define PBC_INTCURR_STATUS      0x000018
-/* PBC Interrupt mask register set address */
-#define PBC_INTMASK_SET         0x00001A
-/* PBC Interrupt mask register clear address */
-#define PBC_INTMASK_CLEAR       0x00001C
-/* External UART A */
-#define PBC_SC16C652_UARTA      0x010000
-/* External UART B */
-#define PBC_SC16C652_UARTB      0x010010
-/* Ethernet Controller IO base address */
-#define PBC_CS8900A_IOBASE      0x020000
-/* Ethernet Controller Memory base address */
-#define PBC_CS8900A_MEMBASE     0x021000
-/* Ethernet Controller DMA base address */
-#define PBC_CS8900A_DMABASE     0x022000
-/* External chip select 0 */
-#define PBC_XCS0                0x040000
-/* LCD Display enable */
-#define PBC_LCD_EN_B            0x060000
-/* Code test debug enable */
-#define PBC_CODE_B              0x070000
-/* PSRAM memory select */
-#define PBC_PSRAM_B             0x5000000
-#define PBC_INTSTATUS_REG       (PBC_INTSTATUS + PBC_BASE_ADDRESS)
-#define PBC_INTCURR_STATUS_REG  (PBC_INTCURR_STATUS + PBC_BASE_ADDRESS)
-#define PBC_INTMASK_SET_REG     (PBC_INTMASK_SET + PBC_BASE_ADDRESS)
-#define PBC_INTMASK_CLEAR_REG   (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
-#define EXPIO_PARENT_INT        IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
-#define MXC_EXP_IO_BASE         (MXC_BOARD_IRQ_START)
-#define MXC_IRQ_TO_EXPIO(irq)   ((irq) - MXC_EXP_IO_BASE)
-#define EXPIO_INT_LOW_BAT       (MXC_EXP_IO_BASE + 0)
-#define EXPIO_INT_PB_IRQ        (MXC_EXP_IO_BASE + 1)
-#define EXPIO_INT_OTG_FS_OVR    (MXC_EXP_IO_BASE + 2)
-#define EXPIO_INT_FSH_OVR       (MXC_EXP_IO_BASE + 3)
-#define EXPIO_INT_RES4          (MXC_EXP_IO_BASE + 4)
-#define EXPIO_INT_RES5          (MXC_EXP_IO_BASE + 5)
-#define EXPIO_INT_RES6          (MXC_EXP_IO_BASE + 6)
-#define EXPIO_INT_RES7          (MXC_EXP_IO_BASE + 7)
-#define EXPIO_INT_ENET_INT      (MXC_EXP_IO_BASE + 8)
-#define EXPIO_INT_OTG_FS_INT    (MXC_EXP_IO_BASE + 9)
-#define EXPIO_INT_XUART_INTA    (MXC_EXP_IO_BASE + 10)
-#define EXPIO_INT_XUART_INTB    (MXC_EXP_IO_BASE + 11)
-#define EXPIO_INT_SYNTH_IRQ     (MXC_EXP_IO_BASE + 12)
-#define EXPIO_INT_CE_INT1       (MXC_EXP_IO_BASE + 13)
-#define EXPIO_INT_CE_INT2       (MXC_EXP_IO_BASE + 14)
-#define EXPIO_INT_RES15         (MXC_EXP_IO_BASE + 15)
-#define MXC_MAX_EXP_IO_LINES    16
-#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
index eb5a5024622e..0df71bfefbb1 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
@@ -31,7 +31,7 @@ enum mx31lilly_boards {
 /*
 * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
+ * its own devices, it calls the baseboard's init function.
 */
 extern void mx31lilly_db_init(void);
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index 2b2da0367578..c1ad0ae807cc 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -32,7 +32,7 @@ enum mx31lite_boards {
 /*
 * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
+ * its own devices, it calls the baseboard's init function.
 */
 extern void mx31lite_db_init(void);
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
index 36ff3cedee1a..de14543891cf 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
@@ -31,7 +31,7 @@ enum mx31moboard_boards {
 /*
 * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
+ * its own devices, it calls the baseboard's init function.
 */
 extern void mx31moboard_devboard_init(void);
diff --git a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
deleted file mode 100644
index 383f1c04df06..000000000000
--- a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MXC_BOARD_MX35PDK_H__
-#define __ASM_ARCH_MXC_BOARD_MX35PDK_H__
-#endif /* __ASM_ARCH_MXC_BOARD_MX35PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm037.h b/arch/arm/plat-mxc/include/mach/board-pcm037.h
deleted file mode 100644
index 13411709b13a..000000000000
--- a/arch/arm/plat-mxc/include/mach/board-pcm037.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  Copyright (C) 2008 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__
-#define __ASM_ARCH_MXC_BOARD_PCM037_H__
-#endif /* __ASM_ARCH_MXC_BOARD_PCM037_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h
index 410f9786ed22..6f371e35753d 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm038.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm038.h
@@ -22,7 +22,7 @@
 #ifndef __ASSEMBLY__
 /*
 * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
+ * its own devices, it calls the baseboard's init function.
 * TODO: Add your own baseboard init function and call it from
 * inside pcm038_init().
 *
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm043.h b/arch/arm/plat-mxc/include/mach/board-pcm043.h
deleted file mode 100644
index 1ac4e1682e5c..000000000000
--- a/arch/arm/plat-mxc/include/mach/board-pcm043.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  Copyright (C) 2008 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MXC_BOARD_PCM043_H__
-#define __ASM_ARCH_MXC_BOARD_PCM043_H__
-#endif /* __ASM_ARCH_MXC_BOARD_PCM043_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-qong.h b/arch/arm/plat-mxc/include/mach/board-qong.h
deleted file mode 100644
index 6d88c7af4b23..000000000000
--- a/arch/arm/plat-mxc/include/mach/board-qong.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
- */
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_MXC_BOARD_QONG_H__
-#define __ASM_ARCH_MXC_BOARD_QONG_H__
-/* NOR FLASH */
-#define QONG_NOR_SIZE           (128*1024*1024)
-#endif /* __ASM_ARCH_MXC_BOARD_QONG_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
new file mode 100644
index 000000000000..05c8d3f0a08f
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+struct platform_device *imx_add_platform_device(const char *name, int id,
+                const struct resource *res, unsigned int num_resources,
+                const void *data, size_t size_data);
+#include <mach/i2c.h>
+struct platform_device *__init imx_add_imx_i2c(int id,
+                resource_size_t iobase, resource_size_t iosize, int irq,
+                const struct imxi2c_platform_data *pdata);
+#include <mach/imx-uart.h>
+struct platform_device *__init imx_add_imx_uart_3irq(int id,
+                resource_size_t iobase, resource_size_t iosize,
+                resource_size_t irqrx, resource_size_t irqtx,
+                resource_size_t irqrts,
+                const struct imxuart_platform_data *pdata);
+struct platform_device *__init imx_add_imx_uart_1irq(int id,
+                resource_size_t iobase, resource_size_t iosize,
+                resource_size_t irq,
+                const struct imxuart_platform_data *pdata);
+#include <mach/mxc_nand.h>
+struct platform_device *__init imx_add_mxc_nand_v1(resource_size_t iobase,
+                int irq, const struct mxc_nand_platform_data *pdata);
+struct platform_device *__init imx_add_mxc_nand_v21(resource_size_t iobase,
+                int irq, const struct mxc_nand_platform_data *pdata);
+#include <mach/spi.h>
+struct platform_device *__init imx_add_spi_imx(int id,
+                resource_size_t iobase, resource_size_t iosize, int irq,
+                const struct spi_imx_master *pdata);
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
index 3887f3fe29d4..15d59510f597 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
@@ -12,10 +12,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 #ifndef __MACH_IOMUX_MXC91231_H__
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index 5eba7e6785de..641b24618239 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -91,24 +91,24 @@
 #define MX1_SIM_DATA_INT        16
 #define MX1_RTC_INT             17
 #define MX1_RTC_SAMINT          18
-#define MX1_UART2_MINT_PFERR    19
+#define MX1_INT_UART2PFERR      19
-#define MX1_UART2_MINT_RTS      20
+#define MX1_INT_UART2RTS        20
-#define MX1_UART2_MINT_DTR      21
+#define MX1_INT_UART2DTR        21
-#define MX1_UART2_MINT_UARTC    22
+#define MX1_INT_UART2UARTC      22
-#define MX1_UART2_MINT_TX       23
+#define MX1_INT_UART2TX         23
-#define MX1_UART2_MINT_RX       24
+#define MX1_INT_UART2RX         24
-#define MX1_UART1_MINT_PFERR    25
+#define MX1_INT_UART1PFERR      25
-#define MX1_UART1_MINT_RTS      26
+#define MX1_INT_UART1RTS        26
-#define MX1_UART1_MINT_DTR      27
+#define MX1_INT_UART1DTR        27
-#define MX1_UART1_MINT_UARTC    28
+#define MX1_INT_UART1UARTC      28
-#define MX1_UART1_MINT_TX       29
+#define MX1_INT_UART1TX         29
-#define MX1_UART1_MINT_RX       30
+#define MX1_INT_UART1RX         30
 #define MX1_VOICE_DAC_INT       31
 #define MX1_VOICE_ADC_INT       32
 #define MX1_PEN_DATA_INT        33
 #define MX1_PWM_INT             34
 #define MX1_SDHC_INT            35
-#define MX1_I2C_INT             39
+#define MX1_INT_I2C             39
 #define MX1_CSPI_INT            41
 #define MX1_SSI_TX_INT          42
 #define MX1_SSI_TX_ERR_INT      43
@@ -245,7 +245,7 @@
 #define PEN_DATA_INT MX1_PEN_DATA_INT
 #define PWM_INT MX1_PWM_INT
 #define SDHC_INT MX1_SDHC_INT
-#define I2C_INT MX1_I2C_INT
+#define I2C_INT MX1_INT_I2C
 #define CSPI_INT MX1_CSPI_INT
 #define SSI_TX_INT MX1_SSI_TX_INT
 #define SSI_TX_ERR_INT MX1_SSI_TX_ERR_INT
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
index 7516f2949afe..2f2aad1032c1 100644
--- a/arch/arm/plat-mxc/include/mach/mx25.h
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -11,6 +11,10 @@
 #define MX25_AVIC_BASE_ADDR_VIRT        0xfc400000
 #define MX25_AVIC_SIZE                  SZ_1M
+#define MX25_I2C1_BASE_ADDR             (MX25_AIPS1_BASE_ADDR + 0x80000)
+#define MX25_I2C3_BASE_ADDR             (MX25_AIPS1_BASE_ADDR + 0x84000)
+#define MX25_I2C2_BASE_ADDR             (MX25_AIPS1_BASE_ADDR + 0x98000)
+#define MX25_CSPI1_BASE_ADDR            (MX25_AIPS1_BASE_ADDR + 0xa4000)
 #define MX25_IOMUXC_BASE_ADDR           (MX25_AIPS1_BASE_ADDR + 0xac000)
 #define MX25_CRM_BASE_ADDR              (MX25_AIPS2_BASE_ADDR + 0x80000)
@@ -30,7 +34,12 @@
 #define MX25_UART1_BASE_ADDR            0x43f90000
 #define MX25_UART2_BASE_ADDR            0x43f94000
 #define MX25_AUDMUX_BASE_ADDR           0x43fb0000
+#define MX25_UART3_BASE_ADDR            0x5000c000
+#define MX25_UART4_BASE_ADDR            0x50008000
+#define MX25_UART5_BASE_ADDR            0x5002c000
+#define MX25_CSPI3_BASE_ADDR            0x50004000
+#define MX25_CSPI2_BASE_ADDR            0x50010000
 #define MX25_FEC_BASE_ADDR              0x50038000
 #define MX25_SSI2_BASE_ADDR             0x50014000
 #define MX25_SSI1_BASE_ADDR             0x50034000
@@ -41,14 +50,25 @@
 #define MX25_OTG_BASE_ADDR              0x53ff4000
 #define MX25_CSI_BASE_ADDR              0x53ff8000
-#define MX25_INT_SSI2   11
+#define MX25_INT_CSPI3          0
-#define MX25_INT_SSI1   12
+#define MX25_INT_I2C1           3
-#define MX25_INT_CSI    17
+#define MX25_INT_I2C2           4
-#define MX25_INT_DRYICE 25
+#define MX25_INT_UART4          5
-#define MX25_INT_NANDFC 33
+#define MX25_INT_I2C3           10
-#define MX25_INT_LCDC   39
+#define MX25_INT_SSI2           11
-#define MX25_INT_KPP    24
+#define MX25_INT_SSI1           12
-#define MX25_INT_FEC    57
+#define MX25_INT_CSPI2          13
+#define MX25_INT_CSPI1          14
+#define MX25_INT_CSI            17
+#define MX25_INT_UART3          18
+#define MX25_INT_KPP            24
+#define MX25_INT_DRYICE         25
+#define MX25_INT_UART2          32
+#define MX25_INT_NANDFC         33
+#define MX25_INT_LCDC           39
+#define MX25_INT_UART5          40
+#define MX25_INT_UART1          45
+#define MX25_INT_FEC            57
 #if defined(IMX_NEEDS_DEPRECATED_SYMBOLS)
 #define UART1_BASE_ADDR                 MX25_UART1_BASE_ADDR
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index bae9cd75beee..a8ab2e02a8ca 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -48,7 +48,7 @@
 #define MX27_CSPI2_BASE_ADDR                    (MX27_AIPI_BASE_ADDR + 0x0f000)
 #define MX27_SSI1_BASE_ADDR                     (MX27_AIPI_BASE_ADDR + 0x10000)
 #define MX27_SSI2_BASE_ADDR                     (MX27_AIPI_BASE_ADDR + 0x11000)
-#define MX27_I2C_BASE_ADDR                      (MX27_AIPI_BASE_ADDR + 0x12000)
+#define MX27_I2C1_BASE_ADDR                     (MX27_AIPI_BASE_ADDR + 0x12000)
 #define MX27_SDHC1_BASE_ADDR                    (MX27_AIPI_BASE_ADDR + 0x13000)
 #define MX27_SDHC2_BASE_ADDR                    (MX27_AIPI_BASE_ADDR + 0x14000)
 #define MX27_GPIO_BASE_ADDR                     (MX27_AIPI_BASE_ADDR + 0x15000)
@@ -150,7 +150,7 @@ static inline void mx27_setup_weimcs(size_t cs,
 #define MX27_INT_SDHC3          9
 #define MX27_INT_SDHC2          10
 #define MX27_INT_SDHC1          11
-#define MX27_INT_I2C            12
+#define MX27_INT_I2C1           12
 #define MX27_INT_SSI2           13
 #define MX27_INT_SSI1           14
 #define MX27_INT_CSPI2          15
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index fb90e119c2b5..afee3ab9d62e 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -23,7 +23,7 @@
 #define MX31_ETB_SLOT4_BASE_ADDR                (MX31_AIPS1_BASE_ADDR + 0x10000)
 #define MX31_ETB_SLOT5_BASE_ADDR                (MX31_AIPS1_BASE_ADDR + 0x14000)
 #define MX31_ECT_CTIO_BASE_ADDR                 (MX31_AIPS1_BASE_ADDR + 0x18000)
-#define MX31_I2C_BASE_ADDR                      (MX31_AIPS1_BASE_ADDR + 0x80000)
+#define MX31_I2C1_BASE_ADDR                     (MX31_AIPS1_BASE_ADDR + 0x80000)
 #define MX31_I2C3_BASE_ADDR                     (MX31_AIPS1_BASE_ADDR + 0x84000)
 #define MX31_OTG_BASE_ADDR                      (MX31_AIPS1_BASE_ADDR + 0x88000)
 #define MX31_ATA_BASE_ADDR                      (MX31_AIPS1_BASE_ADDR + 0x8c000)
@@ -145,7 +145,7 @@ static inline void mx31_setup_weimcs(size_t cs,
 #define MX31_INT_FIRI           7
 #define MX31_INT_MMC_SDHC2      8
 #define MX31_INT_MMC_SDHC1      9
-#define MX31_INT_I2C            10
+#define MX31_INT_I2C1           10
 #define MX31_INT_SSI2           11
 #define MX31_INT_SSI1           12
 #define MX31_INT_CSPI2          13
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
index 526a55842ae5..cda60c715127 100644
--- a/arch/arm/plat-mxc/include/mach/mx35.h
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -18,7 +18,7 @@
 #define MX35_ETB_SLOT4_BASE_ADDR                (MX35_AIPS1_BASE_ADDR + 0x10000)
 #define MX35_ETB_SLOT5_BASE_ADDR                (MX35_AIPS1_BASE_ADDR + 0x14000)
 #define MX35_ECT_CTIO_BASE_ADDR                 (MX35_AIPS1_BASE_ADDR + 0x18000)
-#define MX35_I2C_BASE_ADDR                      (MX35_AIPS1_BASE_ADDR + 0x80000)
+#define MX35_I2C1_BASE_ADDR                     (MX35_AIPS1_BASE_ADDR + 0x80000)
 #define MX35_I2C3_BASE_ADDR                     (MX35_AIPS1_BASE_ADDR + 0x84000)
 #define MX35_UART1_BASE_ADDR                    (MX35_AIPS1_BASE_ADDR + 0x90000)
 #define MX35_UART2_BASE_ADDR                    (MX35_AIPS1_BASE_ADDR + 0x94000)
@@ -123,7 +123,7 @@
 #define MX35_INT_MMC_SDHC1      7
 #define MX35_INT_MMC_SDHC2      8
 #define MX35_INT_MMC_SDHC3      9
-#define MX35_INT_I2C            10
+#define MX35_INT_I2C1           10
 #define MX35_INT_SSI1           11
 #define MX35_INT_SSI2           12
 #define MX35_INT_CSPI2          13
diff --git a/arch/arm/plat-mxc/include/mach/mx3_camera.h b/arch/arm/plat-mxc/include/mach/mx3_camera.h
index 36d7ff27b5e2..f226ee3777e1 100644
--- a/arch/arm/plat-mxc/include/mach/mx3_camera.h
+++ b/arch/arm/plat-mxc/include/mach/mx3_camera.h
@@ -12,10 +12,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 #ifndef _MX3_CAMERA_H_
diff --git a/arch/arm/plat-mxc/include/mach/mxc91231.h b/arch/arm/plat-mxc/include/mach/mxc91231.h
index 5182b986b785..0ca3101ebf36 100644
--- a/arch/arm/plat-mxc/include/mach/mxc91231.h
+++ b/arch/arm/plat-mxc/include/mach/mxc91231.h
@@ -13,10 +13,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 #ifndef __MACH_MXC91231_H__
 #define __MACH_MXC91231_H__
diff --git a/arch/arm/plat-mxc/include/mach/mxc_nand.h b/arch/arm/plat-mxc/include/mach/mxc_nand.h
index 2d74748c5db7..04c0d060d814 100644
--- a/arch/arm/plat-mxc/include/mach/mxc_nand.h
+++ b/arch/arm/plat-mxc/include/mach/mxc_nand.h
@@ -23,9 +23,9 @@
 #include <linux/mtd/partitions.h>
 struct mxc_nand_platform_data {
-        int width;      /* data bus width in bytes */
+        unsigned int width;     /* data bus width in bytes */
-        int hw_ecc:1;   /* 0 if supress hardware ECC */
+        unsigned int hw_ecc:1;  /* 0 if supress hardware ECC */
-        int flash_bbt:1; /* set to 1 to use a flash based bbt */
+        unsigned int flash_bbt:1; /* set to 1 to use a flash based bbt */
        struct mtd_partition *parts;    /* partition table */
        int nr_parts;                   /* size of parts */
 };
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index ef00199568de..4acd1143a9bd 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -12,10 +12,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 #ifndef __ASM_ARCH_MXC_SYSTEM_H__
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
index 024416ed11cd..2d9624697cc9 100644
--- a/arch/arm/plat-mxc/include/mach/timex.h
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -11,10 +11,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 #ifndef __ASM_ARCH_MXC_TIMEX_H__
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index b6d3d0fddc48..d9bd37e4667a 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -13,10 +13,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 #ifndef __ASM_ARCH_MXC_UNCOMPRESS_H__
 #define __ASM_ARCH_MXC_UNCOMPRESS_H__
diff --git a/arch/arm/plat-mxc/include/mach/vmalloc.h b/arch/arm/plat-mxc/include/mach/vmalloc.h
index 44243a278434..ef6379c474be 100644
--- a/arch/arm/plat-mxc/include/mach/vmalloc.h
+++ b/arch/arm/plat-mxc/include/mach/vmalloc.h
@@ -11,10 +11,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 #ifndef __ASM_ARCH_MXC_VMALLOC_H__
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 778ddfe57d89..7331f2ace5fe 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -142,9 +142,6 @@ void __init mxc_init_irq(void __iomem *irqbase)
        for (i = 0; i < 8; i++)
                __raw_writel(0, avic_base + AVIC_NIPRIORITY(i));
-        /* init architectures chained interrupt handler */
-        mxc_register_gpios();
 #ifdef CONFIG_FIQ
        /* Initialize FIQ */
        init_FIQ();
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 97f42799fa58..925bce4607e7 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -14,10 +14,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 #include <linux/kernel.h>
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
index 9b86d2a60d43..b3da9aad4295 100644
--- a/arch/arm/plat-mxc/tzic.c
+++ b/arch/arm/plat-mxc/tzic.c
@@ -145,8 +145,6 @@ void __init tzic_init_irq(void __iomem *irqbase)
                set_irq_handler(i, handle_level_irq);
                set_irq_flags(i, IRQF_VALID);
        }
-        mxc_register_gpios();
        pr_info("TrustZone Interrupt Controller (TZIC) initialized\n");
 }
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index dc2ac42d6319..393e9219a5b6 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -624,79 +624,58 @@ do {	\
        __raw_writel(l, base + reg); \
 } while(0)
-void omap_set_gpio_debounce(int gpio, int enable)
+/**
+ * _set_gpio_debounce - low level gpio debounce time
+ * @bank: the gpio bank we're acting upon
+ * @gpio: the gpio number on this @gpio
+ * @debounce: debounce time to use
+ *
+ * OMAP's debounce time is in 31us steps so we need
+ * to convert and round up to the closest unit.
+ */
+static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
+                unsigned debounce)
 {
-        struct gpio_bank *bank;
+        void __iomem            *reg = bank->base;
-        void __iomem *reg;
+        u32                     val;
-        unsigned long flags;
+        u32                     l;
-        u32 val, l = 1 << get_gpio_index(gpio);
+        if (debounce < 32)
+                debounce = 0x01;
+        else if (debounce > 7936)
+                debounce = 0xff;
+        else
+                debounce = (debounce / 0x1f) - 1;
-        if (cpu_class_is_omap1())
+        l = 1 << get_gpio_index(gpio);
-                return;
-        bank = get_gpio_bank(gpio);
+        if (cpu_is_omap44xx())
-        reg = bank->base;
+                reg += OMAP4_GPIO_DEBOUNCINGTIME;
+        else
+                reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
+        __raw_writel(debounce, reg);
+        reg = bank->base;
        if (cpu_is_omap44xx())
                reg += OMAP4_GPIO_DEBOUNCENABLE;
        else
                reg += OMAP24XX_GPIO_DEBOUNCE_EN;
-        if (!(bank->mod_usage & l)) {
-                printk(KERN_ERR "GPIO %d not requested\n", gpio);
-                return;
-        }
-        spin_lock_irqsave(&bank->lock, flags);
        val = __raw_readl(reg);
-        if (enable && !(val & l))
+        if (debounce) {
                val |= l;
-        else if (!enable && (val & l))
+                if (cpu_is_omap34xx() || cpu_is_omap44xx())
-                val &= ~l;
-        else
-                goto done;
-        if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
-                bank->dbck_enable_mask = val;
-                if (enable)
                        clk_enable(bank->dbck);
-                else
+        } else {
+                val &= ~l;
+                if (cpu_is_omap34xx() || cpu_is_omap44xx())
                        clk_disable(bank->dbck);
        }
        __raw_writel(val, reg);
-done:
-        spin_unlock_irqrestore(&bank->lock, flags);
 }
-EXPORT_SYMBOL(omap_set_gpio_debounce);
-void omap_set_gpio_debounce_time(int gpio, int enc_time)
-{
-        struct gpio_bank *bank;
-        void __iomem *reg;
-        if (cpu_class_is_omap1())
-                return;
-        bank = get_gpio_bank(gpio);
-        reg = bank->base;
-        if (!bank->mod_usage) {
-                printk(KERN_ERR "GPIO not requested\n");
-                return;
-        }
-        enc_time &= 0xff;
-        if (cpu_is_omap44xx())
-                reg += OMAP4_GPIO_DEBOUNCINGTIME;
-        else
-                reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
-        __raw_writel(enc_time, reg);
-}
-EXPORT_SYMBOL(omap_set_gpio_debounce_time);
 #ifdef CONFIG_ARCH_OMAP2PLUS
 static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
@@ -1656,6 +1635,20 @@ static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
        return 0;
 }
+static int gpio_debounce(struct gpio_chip *chip, unsigned offset,
+                unsigned debounce)
+{
+        struct gpio_bank *bank;
+        unsigned long flags;
+        bank = container_of(chip, struct gpio_bank, chip);
+        spin_lock_irqsave(&bank->lock, flags);
+        _set_gpio_debounce(bank, offset, debounce);
+        spin_unlock_irqrestore(&bank->lock, flags);
+        return 0;
+}
 static void gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 {
        struct gpio_bank *bank;
@@ -1909,6 +1902,7 @@ static int __init _omap_gpio_init(void)
                bank->chip.direction_input = gpio_input;
                bank->chip.get = gpio_get;
                bank->chip.direction_output = gpio_output;
+                bank->chip.set_debounce = gpio_debounce;
                bank->chip.set = gpio_set;
                bank->chip.to_irq = gpio_2irq;
                if (bank_is_mpuio(bank)) {
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 5cb2dd1da632..11d6a1bbd90d 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -29,3 +29,4 @@ config S5P_EXT_INT
        bool
        help
          Use the external interrupts (other than GPIO interrupts.)
+          Note: Do not choose this for S5P6440.
diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c
index 24a931fd8d3b..b5e255265f20 100644
--- a/arch/arm/plat-s5p/clock.c
+++ b/arch/arm/plat-s5p/clock.c
@@ -148,6 +148,7 @@ static struct clk *s5p_clks[] __initdata = {
        &clk_fout_vpll,
        &clk_arm,
        &clk_vpll,
+        &clk_xusbxti,
 };
 void __init s5p_register_clocks(unsigned long xtal_freq)
diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h
index 9ff3d718be39..3fb3a3a17465 100644
--- a/arch/arm/plat-s5p/include/plat/irqs.h
+++ b/arch/arm/plat-s5p/include/plat/irqs.h
@@ -87,4 +87,11 @@
 #define IRQ_TIMER3              S5P_TIMER_IRQ(3)
 #define IRQ_TIMER4              S5P_TIMER_IRQ(4)
+#define IRQ_EINT(x)             ((x) < 16 ? ((x) + S5P_EINT_BASE1) \
+                                        : ((x) - 16 + S5P_EINT_BASE2))
+#define EINT_OFFSET(irq)        ((irq) < S5P_EINT_BASE2 ? \
+                                                ((irq) - S5P_EINT_BASE1) : \
+                                                ((irq) + 16 - S5P_EINT_BASE2))
 #endif /* __ASM_PLAT_S5P_IRQS_H */
diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-s5p/irq-eint.c
index eaa70aa0127b..e56c8075df97 100644
--- a/arch/arm/plat-s5p/irq-eint.c
+++ b/arch/arm/plat-s5p/irq-eint.c
@@ -60,7 +60,7 @@ static void s5p_irq_eint_maskack(unsigned int irq)
 static int s5p_irq_eint_set_type(unsigned int irq, unsigned int type)
 {
-        int offs = eint_offset(irq);
+        int offs = EINT_OFFSET(irq);
        int shift;
        u32 ctrl, mask;
        u32 newvalue = 0;
@@ -139,17 +139,16 @@ static struct irq_chip s5p_irq_eint = {
 */
 static inline void s5p_irq_demux_eint(unsigned int start)
 {
-        u32 status;
+        u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
        u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
        unsigned int irq;
-        status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
        status &= ~mask;
        status &= 0xff;
        while (status) {
-                irq = fls(status);
+                irq = fls(status) - 1;
-                generic_handle_irq(irq - 1 + start);
+                generic_handle_irq(irq + start);
                status &= ~(1 << irq);
        }
 }
@@ -162,12 +161,18 @@ static void s5p_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
 static inline void s5p_irq_vic_eint_mask(unsigned int irq)
 {
+        void __iomem *base = get_irq_chip_data(irq);
        s5p_irq_eint_mask(irq);
+        writel(1 << EINT_OFFSET(irq), base + VIC_INT_ENABLE_CLEAR);
 }
 static void s5p_irq_vic_eint_unmask(unsigned int irq)
 {
+        void __iomem *base = get_irq_chip_data(irq);
        s5p_irq_eint_unmask(irq);
+        writel(1 << EINT_OFFSET(irq), base + VIC_INT_ENABLE);
 }
 static inline void s5p_irq_vic_eint_ack(unsigned int irq)
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
index 34efdd2b032c..db4112c6f2be 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
@@ -43,6 +43,11 @@ struct s3c_gpio_chip;
 * layouts. Provide an point to vector control routine and provide any
 * per-bank configuration information that other systems such as the
 * external interrupt code will need.
+ *
+ * @sa s3c_gpio_cfgpin
+ * @sa s3c_gpio_getcfg
+ * @sa s3c_gpio_setpull
+ * @sa s3c_gpio_getpull
 */
 struct s3c_gpio_cfg {
        unsigned int    cfg_eint;
@@ -70,11 +75,25 @@ struct s3c_gpio_cfg {
 /**
 * s3c_gpio_cfgpin() - Change the GPIO function of a pin.
 * @pin pin The pin number to configure.
- * @pin to The configuration for the pin's function.
+ * @to to The configuration for the pin's function.
 *
 * Configure which function is actually connected to the external
 * pin, such as an gpio input, output or some form of special function
 * connected to an internal peripheral block.
+ *
+ * The @to parameter can be one of the generic S3C_GPIO_INPUT, S3C_GPIO_OUTPUT
+ * or S3C_GPIO_SFN() to indicate one of the possible values that the helper
+ * will then generate the correct bit mask and shift for the configuration.
+ *
+ * If a bank of GPIOs all needs to be set to special-function 2, then
+ * the following code will work:
+ *
+ *      for (gpio = start; gpio < end; gpio++)
+ *              s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ *
+ * The @to parameter can also be a specific value already shifted to the
+ * correct position in the control register, although these are discouraged
+ * in newer kernels and are only being kept for compatibility.
 */
 extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to);
@@ -108,6 +127,8 @@ extern unsigned s3c_gpio_getcfg(unsigned int pin);
 * This function sets the state of the pull-{up,down} resistor for the
 * specified pin. It will return 0 if successfull, or a negative error
 * code if the pin cannot support the requested pull setting.
+ *
+ * @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP.
 */
 extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);