diff options
Diffstat (limited to 'arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c')
-rw-r--r-- | arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c | 147 |
1 files changed, 147 insertions, 0 deletions
diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c new file mode 100644 index 000000000000..384e6e934b87 --- /dev/null +++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c | |||
@@ -0,0 +1,147 @@ | |||
1 | /* | ||
2 | * R-Car Generation 2 da9063/da9210 regulator quirk | ||
3 | * | ||
4 | * The r8a7790/lager and r8a7791/koelsch development boards have da9063 and | ||
5 | * da9210 regulators. Both regulators have their interrupt request lines tied | ||
6 | * to the same interrupt pin (IRQ2) on the SoC. | ||
7 | * | ||
8 | * After cold boot or da9063-induced restart, both the da9063 and da9210 seem | ||
9 | * to assert their interrupt request lines. Hence as soon as one driver | ||
10 | * requests this irq, it gets stuck in an interrupt storm, as it only manages | ||
11 | * to deassert its own interrupt request line, and the other driver hasn't | ||
12 | * installed an interrupt handler yet. | ||
13 | * | ||
14 | * To handle this, install a quirk that masks the interrupts in both the | ||
15 | * da9063 and da9210. This quirk has to run after the i2c master driver has | ||
16 | * been initialized, but before the i2c slave drivers are initialized. | ||
17 | * | ||
18 | * Copyright (C) 2015 Glider bvba | ||
19 | * | ||
20 | * This program is free software; you can redistribute it and/or modify | ||
21 | * it under the terms of the GNU General Public License as published by | ||
22 | * the Free Software Foundation; version 2 of the License. | ||
23 | * | ||
24 | * This program is distributed in the hope that it will be useful, | ||
25 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
26 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
27 | * GNU General Public License for more details. | ||
28 | */ | ||
29 | |||
30 | #include <linux/device.h> | ||
31 | #include <linux/i2c.h> | ||
32 | #include <linux/init.h> | ||
33 | #include <linux/io.h> | ||
34 | #include <linux/notifier.h> | ||
35 | #include <linux/of.h> | ||
36 | #include <linux/mfd/da9063/registers.h> | ||
37 | |||
38 | |||
39 | #define IRQC_BASE 0xe61c0000 | ||
40 | #define IRQC_MONITOR 0x104 /* IRQn Signal Level Monitor Register */ | ||
41 | |||
42 | #define REGULATOR_IRQ_MASK BIT(2) /* IRQ2, active low */ | ||
43 | |||
44 | static void __iomem *irqc; | ||
45 | |||
46 | static const u8 da9063_mask_regs[] = { | ||
47 | DA9063_REG_IRQ_MASK_A, | ||
48 | DA9063_REG_IRQ_MASK_B, | ||
49 | DA9063_REG_IRQ_MASK_C, | ||
50 | DA9063_REG_IRQ_MASK_D, | ||
51 | }; | ||
52 | |||
53 | /* DA9210 System Control and Event Registers */ | ||
54 | #define DA9210_REG_MASK_A 0x54 | ||
55 | #define DA9210_REG_MASK_B 0x55 | ||
56 | |||
57 | static const u8 da9210_mask_regs[] = { | ||
58 | DA9210_REG_MASK_A, | ||
59 | DA9210_REG_MASK_B, | ||
60 | }; | ||
61 | |||
62 | static void da9xxx_mask_irqs(struct i2c_client *client, const u8 regs[], | ||
63 | unsigned int nregs) | ||
64 | { | ||
65 | unsigned int i; | ||
66 | |||
67 | dev_info(&client->dev, "Masking %s interrupt sources\n", client->name); | ||
68 | |||
69 | for (i = 0; i < nregs; i++) { | ||
70 | int error = i2c_smbus_write_byte_data(client, regs[i], ~0); | ||
71 | if (error) { | ||
72 | dev_err(&client->dev, "i2c error %d\n", error); | ||
73 | return; | ||
74 | } | ||
75 | } | ||
76 | } | ||
77 | |||
78 | static int regulator_quirk_notify(struct notifier_block *nb, | ||
79 | unsigned long action, void *data) | ||
80 | { | ||
81 | struct device *dev = data; | ||
82 | struct i2c_client *client; | ||
83 | u32 mon; | ||
84 | |||
85 | mon = ioread32(irqc + IRQC_MONITOR); | ||
86 | dev_dbg(dev, "%s: %ld, IRQC_MONITOR = 0x%x\n", __func__, action, mon); | ||
87 | if (mon & REGULATOR_IRQ_MASK) | ||
88 | goto remove; | ||
89 | |||
90 | if (action != BUS_NOTIFY_ADD_DEVICE || dev->type == &i2c_adapter_type) | ||
91 | return 0; | ||
92 | |||
93 | client = to_i2c_client(dev); | ||
94 | dev_dbg(dev, "Detected %s\n", client->name); | ||
95 | |||
96 | if ((client->addr == 0x58 && !strcmp(client->name, "da9063"))) | ||
97 | da9xxx_mask_irqs(client, da9063_mask_regs, | ||
98 | ARRAY_SIZE(da9063_mask_regs)); | ||
99 | else if (client->addr == 0x68 && !strcmp(client->name, "da9210")) | ||
100 | da9xxx_mask_irqs(client, da9210_mask_regs, | ||
101 | ARRAY_SIZE(da9210_mask_regs)); | ||
102 | |||
103 | mon = ioread32(irqc + IRQC_MONITOR); | ||
104 | if (mon & REGULATOR_IRQ_MASK) | ||
105 | goto remove; | ||
106 | |||
107 | return 0; | ||
108 | |||
109 | remove: | ||
110 | dev_info(dev, "IRQ2 is not asserted, removing quirk\n"); | ||
111 | |||
112 | bus_unregister_notifier(&i2c_bus_type, nb); | ||
113 | iounmap(irqc); | ||
114 | return 0; | ||
115 | } | ||
116 | |||
117 | static struct notifier_block regulator_quirk_nb = { | ||
118 | .notifier_call = regulator_quirk_notify | ||
119 | }; | ||
120 | |||
121 | static int __init rcar_gen2_regulator_quirk(void) | ||
122 | { | ||
123 | u32 mon; | ||
124 | |||
125 | if (!of_machine_is_compatible("renesas,koelsch") && | ||
126 | !of_machine_is_compatible("renesas,lager")) | ||
127 | return -ENODEV; | ||
128 | |||
129 | irqc = ioremap(IRQC_BASE, PAGE_SIZE); | ||
130 | if (!irqc) | ||
131 | return -ENOMEM; | ||
132 | |||
133 | mon = ioread32(irqc + IRQC_MONITOR); | ||
134 | if (mon & REGULATOR_IRQ_MASK) { | ||
135 | pr_debug("%s: IRQ2 is not asserted, not installing quirk\n", | ||
136 | __func__); | ||
137 | iounmap(irqc); | ||
138 | return 0; | ||
139 | } | ||
140 | |||
141 | pr_info("IRQ2 is asserted, installing da9063/da9210 regulator quirk\n"); | ||
142 | |||
143 | bus_register_notifier(&i2c_bus_type, ®ulator_quirk_nb); | ||
144 | return 0; | ||
145 | } | ||
146 | |||
147 | arch_initcall(rcar_gen2_regulator_quirk); | ||