1 files changed, 238 insertions, 34 deletions

diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 7da2ca24229d..448ddbe43335 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -43,6 +43,7 @@
 #include <linux/sh_intc.h>
 #include <linux/tca6416_keypad.h>
 #include <linux/usb/r8a66597.h>
+#include <linux/usb/renesas_usbhs.h>
 
 #include <video/sh_mobile_hdmi.h>
 #include <video/sh_mobile_lcdc.h>
@@ -143,7 +144,30 @@
  * open      | external VBUS | Function
  *
  * *1
- * CN31 is used as Host in Linux.
+ * CN31 is used as
+ * CONFIG_USB_R8A66597_HCD      Host
+ * CONFIG_USB_RENESAS_USBHS     Function
+ *
+ * CAUTION
+ *
+ * renesas_usbhs driver can use external interrupt mode
+ * (which come from USB-PHY) or autonomy mode (it use own interrupt)
+ * for detecting connection/disconnection when Function.
+ * USB will be power OFF while it has been disconnecting
+ * if external interrupt mode, and it is always power ON if autonomy mode,
+ *
+ * mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0",
+ * because Touchscreen is using IRQ7-PORT40.
+ * It is impossible to use IRQ7 demux on this board.
+ *
+ * We can use external interrupt mode USB-Function on "USB1".
+ * USB1 can become Host by r8a66597, and become Function by renesas_usbhs.
+ * But don't select both drivers in same time.
+ * These uses same IRQ number for request_irq(), and aren't supporting
+ * IRQF_SHARD / IORESOURCE_IRQ_SHAREABLE.
+ *
+ * Actually these are old/new version of USB driver.
+ * This mean its register will be broken if it supports SHARD IRQ,
  */
 
 /*
@@ -185,6 +209,7 @@
  * FIXME !!
  *
  * gpio_no_direction
+ * gpio_pull_down
  * are quick_hack.
  *
  * current gpio frame work doesn't have
@@ -196,6 +221,16 @@ static void __init gpio_no_direction(u32 addr)
         __raw_writeb(0x00, addr);
 }
 
+static void __init gpio_pull_down(u32 addr)
+{
+        u8 data = __raw_readb(addr);
+
+        data &= 0x0F;
+        data |= 0xA0;
+
+        __raw_writeb(data, addr);
+}
+
 /* MTD */
 static struct mtd_partition nor_flash_partitions[] = {
         {
@@ -458,12 +493,6 @@ static void __init hdmi_init_pm_clock(void)
                 goto out;
         }
 
-        ret = clk_enable(&sh7372_pllc2_clk);
-        if (ret < 0) {
-                pr_err("Cannot enable pllc2 clock\n");
-                goto out;
-        }
-
         pr_debug("PLLC2 set frequency %lu\n", rate);
 
         ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
@@ -515,6 +544,157 @@ static struct platform_device usb1_host_device = {
         .resource       = usb1_host_resources,
 };
 
+/* USB1 (Function) */
+#define USB_PHY_MODE            (1 << 4)
+#define USB_PHY_INT_EN          ((1 << 3) | (1 << 2))
+#define USB_PHY_ON              (1 << 1)
+#define USB_PHY_OFF             (1 << 0)
+#define USB_PHY_INT_CLR         (USB_PHY_ON | USB_PHY_OFF)
+
+struct usbhs_private {
+        unsigned int irq;
+        unsigned int usbphyaddr;
+        unsigned int usbcrcaddr;
+        struct renesas_usbhs_platform_info info;
+};
+
+#define usbhs_get_priv(pdev)                            \
+        container_of(renesas_usbhs_get_info(pdev),      \
+                     struct usbhs_private, info)
+
+#define usbhs_is_connected(priv)                        \
+        (!((1 << 7) & __raw_readw(priv->usbcrcaddr)))
+
+static int usbhs1_get_id(struct platform_device *pdev)
+{
+        return USBHS_GADGET;
+}
+
+static int usbhs1_get_vbus(struct platform_device *pdev)
+{
+        return usbhs_is_connected(usbhs_get_priv(pdev));
+}
+
+static irqreturn_t usbhs1_interrupt(int irq, void *data)
+{
+        struct platform_device *pdev = data;
+        struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+        dev_dbg(&pdev->dev, "%s\n", __func__);
+
+        renesas_usbhs_call_notify_hotplug(pdev);
+
+        /* clear status */
+        __raw_writew(__raw_readw(priv->usbphyaddr) | USB_PHY_INT_CLR,
+                     priv->usbphyaddr);
+
+        return IRQ_HANDLED;
+}
+
+static int usbhs1_hardware_init(struct platform_device *pdev)
+{
+        struct usbhs_private *priv = usbhs_get_priv(pdev);
+        int ret;
+
+        irq_set_irq_type(priv->irq, IRQ_TYPE_LEVEL_HIGH);
+
+        /* clear interrupt status */
+        __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);
+
+        ret = request_irq(priv->irq, usbhs1_interrupt, 0,
+                          dev_name(&pdev->dev), pdev);
+        if (ret) {
+                dev_err(&pdev->dev, "request_irq err\n");
+                return ret;
+        }
+
+        /* enable USB phy interrupt */
+        __raw_writew(USB_PHY_MODE | USB_PHY_INT_EN, priv->usbphyaddr);
+
+        return 0;
+}
+
+static void usbhs1_hardware_exit(struct platform_device *pdev)
+{
+        struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+        /* clear interrupt status */
+        __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);
+
+        free_irq(priv->irq, pdev);
+}
+
+static void usbhs1_phy_reset(struct platform_device *pdev)
+{
+        struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+        /* init phy */
+        __raw_writew(0x8a0a, priv->usbcrcaddr);
+}
+
+static u32 usbhs1_pipe_cfg[] = {
+        USB_ENDPOINT_XFER_CONTROL,
+        USB_ENDPOINT_XFER_ISOC,
+        USB_ENDPOINT_XFER_ISOC,
+        USB_ENDPOINT_XFER_BULK,
+        USB_ENDPOINT_XFER_BULK,
+        USB_ENDPOINT_XFER_BULK,
+        USB_ENDPOINT_XFER_INT,
+        USB_ENDPOINT_XFER_INT,
+        USB_ENDPOINT_XFER_INT,
+        USB_ENDPOINT_XFER_BULK,
+        USB_ENDPOINT_XFER_BULK,
+        USB_ENDPOINT_XFER_BULK,
+        USB_ENDPOINT_XFER_BULK,
+        USB_ENDPOINT_XFER_BULK,
+        USB_ENDPOINT_XFER_BULK,
+        USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usbhs_private usbhs1_private = {
+        .irq            = evt2irq(0x0300),      /* IRQ8 */
+        .usbphyaddr     = 0xE60581E2,           /* USBPHY1INTAP */
+        .usbcrcaddr     = 0xE6058130,           /* USBCR4 */
+        .info = {
+                .platform_callback = {
+                        .hardware_init  = usbhs1_hardware_init,
+                        .hardware_exit  = usbhs1_hardware_exit,
+                        .phy_reset      = usbhs1_phy_reset,
+                        .get_id         = usbhs1_get_id,
+                        .get_vbus       = usbhs1_get_vbus,
+                },
+                .driver_param = {
+                        .buswait_bwait  = 4,
+                        .pipe_type      = usbhs1_pipe_cfg,
+                        .pipe_size      = ARRAY_SIZE(usbhs1_pipe_cfg),
+                },
+        },
+};
+
+static struct resource usbhs1_resources[] = {
+        [0] = {
+                .name   = "USBHS",
+                .start  = 0xE68B0000,
+                .end    = 0xE68B00E6 - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = evt2irq(0x1ce0) /* USB1_USB1I0 */,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device usbhs1_device = {
+        .name   = "renesas_usbhs",
+        .id     = 1,
+        .dev = {
+                .platform_data          = &usbhs1_private.info,
+        },
+        .num_resources  = ARRAY_SIZE(usbhs1_resources),
+        .resource       = usbhs1_resources,
+};
+
+
 /* LED */
 static struct gpio_led mackerel_leds[] = {
         {
@@ -690,7 +870,15 @@ static struct resource sdhi0_resources[] = {
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
-                .start  = evt2irq(0x0e00) /* SDHI0 */,
+                .start  = evt2irq(0x0e00) /* SDHI0_SDHI0I0 */,
+                .flags  = IORESOURCE_IRQ,
+        },
+        [2] = {
+                .start  = evt2irq(0x0e20) /* SDHI0_SDHI0I1 */,
+                .flags  = IORESOURCE_IRQ,
+        },
+        [3] = {
+                .start  = evt2irq(0x0e40) /* SDHI0_SDHI0I2 */,
                 .flags  = IORESOURCE_IRQ,
         },
 };
@@ -705,7 +893,7 @@ static struct platform_device sdhi0_device = {
         },
 };
 
-#if !defined(CONFIG_MMC_SH_MMCIF)
+#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
 /* SDHI1 */
 static struct sh_mobile_sdhi_info sdhi1_info = {
         .dma_slave_tx   = SHDMA_SLAVE_SDHI1_TX,
@@ -725,7 +913,15 @@ static struct resource sdhi1_resources[] = {
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
-                .start  = evt2irq(0x0e80),
+                .start  = evt2irq(0x0e80), /* SDHI1_SDHI1I0 */
+                .flags  = IORESOURCE_IRQ,
+        },
+        [2] = {
+                .start  = evt2irq(0x0ea0), /* SDHI1_SDHI1I1 */
+                .flags  = IORESOURCE_IRQ,
+        },
+        [3] = {
+                .start  = evt2irq(0x0ec0), /* SDHI1_SDHI1I2 */
                 .flags  = IORESOURCE_IRQ,
         },
 };
@@ -768,7 +964,15 @@ static struct resource sdhi2_resources[] = {
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
-                .start  = evt2irq(0x1200),
+                .start  = evt2irq(0x1200), /* SDHI2_SDHI2I0 */
+                .flags  = IORESOURCE_IRQ,
+        },
+        [2] = {
+                .start  = evt2irq(0x1220), /* SDHI2_SDHI2I1 */
+                .flags  = IORESOURCE_IRQ,
+        },
+        [3] = {
+                .start  = evt2irq(0x1240), /* SDHI2_SDHI2I2 */
                 .flags  = IORESOURCE_IRQ,
         },
 };
@@ -803,6 +1007,15 @@ static struct resource sh_mmcif_resources[] = {
         },
 };
 
+static struct sh_mmcif_dma sh_mmcif_dma = {
+        .chan_priv_rx   = {
+                .slave_id       = SHDMA_SLAVE_MMCIF_RX,
+        },
+        .chan_priv_tx   = {
+                .slave_id       = SHDMA_SLAVE_MMCIF_TX,
+        },
+};
+
 static struct sh_mmcif_plat_data sh_mmcif_plat = {
         .sup_pclk       = 0,
         .ocr            = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
@@ -810,6 +1023,7 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = {
                           MMC_CAP_8_BIT_DATA |
                           MMC_CAP_NEEDS_POLL,
         .get_cd         = slot_cn7_get_cd,
+        .dma            = &sh_mmcif_dma,
 };
 
 static struct platform_device sh_mmcif_device = {
@@ -858,37 +1072,23 @@ static struct soc_camera_link camera_link = {
         .priv           = &camera_info,
 };
 
-static void dummy_release(struct device *dev)
+static struct platform_device *camera_device;
+
+static void mackerel_camera_release(struct device *dev)
 {
+        soc_camera_platform_release(&camera_device);
 }
 
-static struct platform_device camera_device = {
-        .name           = "soc_camera_platform",
-        .dev            = {
-                .platform_data  = &camera_info,
-                .release        = dummy_release,
-        },
-};
-
 static int mackerel_camera_add(struct soc_camera_link *icl,
                                struct device *dev)
 {
-        if (icl != &camera_link)
-                return -ENODEV;
-
-        camera_info.dev = dev;
-
-        return platform_device_register(&camera_device);
+        return soc_camera_platform_add(icl, dev, &camera_device, &camera_link,
+                                       mackerel_camera_release, 0);
 }
 
 static void mackerel_camera_del(struct soc_camera_link *icl)
 {
-        if (icl != &camera_link)
-                return;
-
-        platform_device_unregister(&camera_device);
-        memset(&camera_device.dev.kobj, 0,
-               sizeof(camera_device.dev.kobj));
+        soc_camera_platform_del(icl, camera_device, &camera_link);
 }
 
 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
@@ -935,12 +1135,13 @@ static struct platform_device *mackerel_devices[] __initdata = {
         &smc911x_device,
         &lcdc_device,
         &usb1_host_device,
+        &usbhs1_device,
         &leds_device,
         &fsi_device,
         &fsi_ak4643_device,
         &fsi_hdmi_device,
         &sdhi0_device,
-#if !defined(CONFIG_MMC_SH_MMCIF)
+#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
         &sdhi1_device,
 #endif
         &sdhi2_device,
@@ -1030,6 +1231,7 @@ static void __init mackerel_map_io(void)
 
 #define GPIO_PORT9CR    0xE6051009
 #define GPIO_PORT10CR   0xE605100A
+#define GPIO_PORT168CR  0xE60520A8
 #define SRCR4           0xe61580bc
 #define USCCR1          0xE6058144
 static void __init mackerel_init(void)
@@ -1088,6 +1290,7 @@ static void __init mackerel_init(void)
         gpio_request(GPIO_FN_OVCN_1_114, NULL);
         gpio_request(GPIO_FN_EXTLP_1,    NULL);
         gpio_request(GPIO_FN_OVCN2_1,    NULL);
+        gpio_pull_down(GPIO_PORT168CR);
 
         /* setup USB phy */
         __raw_writew(0x8a0a, 0xE6058130);       /* USBCR4 */
@@ -1140,7 +1343,7 @@ static void __init mackerel_init(void)
         gpio_request(GPIO_FN_SDHID0_1, NULL);
         gpio_request(GPIO_FN_SDHID0_0, NULL);
 
-#if !defined(CONFIG_MMC_SH_MMCIF)
+#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
         /* enable SDHI1 */
         gpio_request(GPIO_FN_SDHICMD1, NULL);
         gpio_request(GPIO_FN_SDHICLK1, NULL);
@@ -1216,6 +1419,7 @@ static void __init mackerel_init(void)
         platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices));
 
         hdmi_init_pm_clock();
+        sh7372_pm_init();
 }
 
 static void __init mackerel_timer_init(void)