1 files changed, 165 insertions, 0 deletions

diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
new file mode 100644
index 000000000000..44cdd80ea107
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -0,0 +1,165 @@
+# Copyright 2008 Openmoko, Inc.
+#       Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
+#
+# Licensed under GPLv2
+
+# temporary until we can eliminate all drivers using it.
+config PLAT_S3C64XX
+        bool
+        depends on ARCH_S3C64XX
+        default y
+        help
+          Base platform code for any Samsung S3C64XX device
+
+
+# Configuration options for the S3C6410 CPU
+
+config CPU_S3C6400
+        bool
+        help
+          Enable S3C6400 CPU support
+
+config CPU_S3C6410
+        bool
+        help
+          Enable S3C6410 CPU support
+
+config S3C64XX_DMA
+        bool "S3C64XX DMA"
+        select S3C_DMA
+
+config S3C64XX_SETUP_SDHCI
+        select S3C64XX_SETUP_SDHCI_GPIO
+        bool
+        help
+          Internal configuration for default SDHCI setup for S3C6400 and
+          S3C6410 SoCs.
+
+# platform specific device setup
+
+config S3C64XX_SETUP_I2C0
+        bool
+        default y
+        help
+          Common setup code for i2c bus 0.
+
+          Note, currently since i2c0 is always compiled, this setup helper
+          is always compiled with it.
+
+config S3C64XX_SETUP_I2C1
+        bool
+        help
+          Common setup code for i2c bus 1.
+
+config S3C64XX_SETUP_FB_24BPP
+        bool
+        help
+          Common setup code for S3C64XX with an 24bpp RGB display helper.
+
+config S3C64XX_SETUP_SDHCI_GPIO
+        bool
+        help
+          Common setup code for S3C64XX SDHCI GPIO configurations
+
+# S36400 Macchine support
+
+config MACH_SMDK6400
+       bool "SMDK6400"
+        select CPU_S3C6400
+        select S3C_DEV_HSMMC
+        select S3C_DEV_NAND
+        select S3C64XX_SETUP_SDHCI
+        help
+          Machine support for the Samsung SMDK6400
+
+# S3C6410 machine support
+
+config MACH_ANW6410
+        bool "A&W6410"
+        select CPU_S3C6410
+        select S3C_DEV_FB
+        select S3C64XX_SETUP_FB_24BPP
+        help
+          Machine support for the A&W6410
+
+config MACH_SMDK6410
+        bool "SMDK6410"
+        select CPU_S3C6410
+        select S3C_DEV_HSMMC
+        select S3C_DEV_HSMMC1
+        select S3C_DEV_I2C1
+        select S3C_DEV_FB
+        select S3C_DEV_USB_HOST
+        select S3C_DEV_USB_HSOTG
+        select S3C64XX_SETUP_SDHCI
+        select S3C64XX_SETUP_I2C1
+        select S3C64XX_SETUP_FB_24BPP
+        help
+          Machine support for the Samsung SMDK6410
+
+# At least some of the SMDK6410s were shipped with the card detect
+# for the MMC/SD slots connected to the same input. This means that
+# either the boards need to be altered to have channel0 to an alternate
+# configuration or that only one slot can be used.
+
+choice
+        prompt "SMDK6410 MMC/SD slot setup"
+        depends on MACH_SMDK6410
+
+config SMDK6410_SD_CH0
+        bool "Use channel 0 only"
+        depends on MACH_SMDK6410
+        help
+          Select CON7 (channel 0) as the MMC/SD slot, as
+          at least some SMDK6410 boards come with the
+          resistors fitted so that the card detects for
+          channels 0 and 1 are the same.
+
+config SMDK6410_SD_CH1
+        bool "Use channel 1 only"
+        depends on MACH_SMDK6410
+        help
+          Select CON6 (channel 1) as the MMC/SD slot, as
+          at least some SMDK6410 boards come with the
+          resistors fitted so that the card detects for
+          channels 0 and 1 are the same.
+
+endchoice
+
+config SMDK6410_WM1190_EV1
+        bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
+        depends on MACH_SMDK6410
+        select REGULATOR
+        select REGULATOR_WM8350
+        select S3C24XX_GPIO_EXTRA64
+        select MFD_WM8350_I2C
+        select MFD_WM8350_CONFIG_MODE_0
+        select MFD_WM8350_CONFIG_MODE_3
+        select MFD_WM8352_CONFIG_MODE_0
+        help
+          The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
+          and audio daughtercard for the Samsung SMDK6410 reference
+          platform.  Enabling this option will build support for this
+          module into the kernel.  The presence of the module will be
+          detected at runtime so the the resulting kernel can be used
+          with or without the 1190-EV1 fitted.
+
+config MACH_NCP
+        bool "NCP"
+        select CPU_S3C6410
+        select S3C_DEV_I2C1
+        select S3C_DEV_HSMMC1
+        select S3C64XX_SETUP_I2C1
+        help
+          Machine support for the Samsung NCP
+
+config MACH_HMT
+        bool "Airgoo HMT"
+        select CPU_S3C6410
+        select S3C_DEV_FB
+        select S3C_DEV_NAND
+        select S3C_DEV_USB_HOST
+        select S3C64XX_SETUP_FB_24BPP
+        select HAVE_PWM
+        help
+          Machine support for the Airgoo HMT