1 files changed, 276 insertions, 0 deletions

diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
new file mode 100644
index 000000000000..8e569be6e2c7
--- /dev/null
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -0,0 +1,276 @@
+/*
+ * arch/arm/mach-orion5x/ls_hgl-setup.c
+ *
+ * Maintainer: Zhu Qingsen <zhuqs@cn.fujitsu.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/system.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * Linkstation LS-HGL Info
+ ****************************************************************************/
+
+/*
+ * 256K NOR flash Device bus boot chip select
+ */
+
+#define LS_HGL_NOR_BOOT_BASE    0xf4000000
+#define LS_HGL_NOR_BOOT_SIZE    SZ_256K
+
+/*****************************************************************************
+ * 256KB NOR Flash on BOOT Device
+ ****************************************************************************/
+
+static struct physmap_flash_data ls_hgl_nor_flash_data = {
+        .width          = 1,
+};
+
+static struct resource ls_hgl_nor_flash_resource = {
+        .flags  = IORESOURCE_MEM,
+        .start  = LS_HGL_NOR_BOOT_BASE,
+        .end    = LS_HGL_NOR_BOOT_BASE + LS_HGL_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device ls_hgl_nor_flash = {
+        .name                   = "physmap-flash",
+        .id                     = 0,
+        .dev            = {
+                .platform_data  = &ls_hgl_nor_flash_data,
+        },
+        .num_resources          = 1,
+        .resource               = &ls_hgl_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data ls_hgl_eth_data = {
+        .phy_addr       = 8,
+};
+
+/*****************************************************************************
+ * RTC 5C372a on I2C bus
+ ****************************************************************************/
+
+static struct i2c_board_info __initdata ls_hgl_i2c_rtc = {
+        I2C_BOARD_INFO("rs5c372a", 0x32),
+};
+
+/*****************************************************************************
+ * LEDs attached to GPIO
+ ****************************************************************************/
+
+#define LS_HGL_GPIO_LED_ALARM   2
+#define LS_HGL_GPIO_LED_INFO    3
+#define LS_HGL_GPIO_LED_FUNC    17
+#define LS_HGL_GPIO_LED_PWR     0
+
+
+static struct gpio_led ls_hgl_led_pins[] = {
+        {
+                .name      = "alarm:red",
+                .gpio      = LS_HGL_GPIO_LED_ALARM,
+                .active_low     = 1,
+        }, {
+                .name      = "info:amber",
+                .gpio      = LS_HGL_GPIO_LED_INFO,
+                .active_low     = 1,
+        }, {
+                .name      = "func:blue:top",
+                .gpio      = LS_HGL_GPIO_LED_FUNC,
+                .active_low     = 1,
+        }, {
+                .name      = "power:blue:bottom",
+                .gpio      = LS_HGL_GPIO_LED_PWR,
+        },
+};
+
+static struct gpio_led_platform_data ls_hgl_led_data = {
+        .leds      = ls_hgl_led_pins,
+        .num_leds       = ARRAY_SIZE(ls_hgl_led_pins),
+};
+
+static struct platform_device ls_hgl_leds = {
+        .name   = "leds-gpio",
+        .id     = -1,
+        .dev    = {
+                .platform_data  = &ls_hgl_led_data,
+        },
+};
+
+/****************************************************************************
+ * GPIO Attached Keys
+ ****************************************************************************/
+#define LS_HGL_GPIO_KEY_FUNC       15
+#define LS_HGL_GPIO_KEY_POWER      8
+#define LS_HGL_GPIO_KEY_AUTOPOWER  10
+
+#define LS_HGL_SW_POWER     0x00
+#define LS_HGL_SW_AUTOPOWER 0x01
+
+static struct gpio_keys_button ls_hgl_buttons[] = {
+        {
+                .code      = KEY_OPTION,
+                .gpio      = LS_HGL_GPIO_KEY_FUNC,
+                .desc      = "Function Button",
+                .active_low     = 1,
+        }, {
+                .type           = EV_SW,
+                .code      = LS_HGL_SW_POWER,
+                .gpio      = LS_HGL_GPIO_KEY_POWER,
+                .desc      = "Power-on Switch",
+                .active_low     = 1,
+        }, {
+                .type           = EV_SW,
+                .code      = LS_HGL_SW_AUTOPOWER,
+                .gpio      = LS_HGL_GPIO_KEY_AUTOPOWER,
+                .desc      = "Power-auto Switch",
+                .active_low     = 1,
+        },
+};
+
+static struct gpio_keys_platform_data ls_hgl_button_data = {
+        .buttons        = ls_hgl_buttons,
+        .nbuttons       = ARRAY_SIZE(ls_hgl_buttons),
+};
+
+static struct platform_device ls_hgl_button_device = {
+        .name      = "gpio-keys",
+        .id          = -1,
+        .num_resources  = 0,
+        .dev        = {
+                .platform_data  = &ls_hgl_button_data,
+        },
+};
+
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct mv_sata_platform_data ls_hgl_sata_data = {
+        .n_ports        = 2,
+};
+
+
+/*****************************************************************************
+ * Linkstation LS-HGL specific power off method: reboot
+ ****************************************************************************/
+/*
+ * On the Linkstation LS-HGL, the shutdown process is following:
+ * - Userland monitors key events until the power switch goes to off position
+ * - The board reboots
+ * - U-boot starts and goes into an idle mode waiting for the user
+ *   to move the switch to ON position
+ */
+
+static void ls_hgl_power_off(void)
+{
+        arm_machine_restart('h', NULL);
+}
+
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+#define LS_HGL_GPIO_USB_POWER   9
+#define LS_HGL_GPIO_AUTO_POWER  10
+#define LS_HGL_GPIO_POWER           8
+
+#define LS_HGL_GPIO_HDD_POWER   1
+
+static struct orion5x_mpp_mode ls_hgl_mpp_modes[] __initdata = {
+        {  0, MPP_GPIO }, /* LED_PWR */
+        {  1, MPP_GPIO }, /* HDD_PWR */
+        {  2, MPP_GPIO }, /* LED_ALARM */
+        {  3, MPP_GPIO }, /* LED_INFO */
+        {  4, MPP_UNUSED },
+        {  5, MPP_UNUSED },
+        {  6, MPP_GPIO }, /* FAN_LCK */
+        {  7, MPP_GPIO }, /* INIT */
+        {  8, MPP_GPIO }, /* POWER */
+        {  9, MPP_GPIO }, /* USB_PWR */
+        { 10, MPP_GPIO }, /* AUTO_POWER */
+        { 11, MPP_UNUSED }, /* LED_ETH (dummy) */
+        { 12, MPP_UNUSED },
+        { 13, MPP_UNUSED },
+        { 14, MPP_UNUSED },
+        { 15, MPP_GPIO }, /* FUNC */
+        { 16, MPP_UNUSED },
+        { 17, MPP_GPIO }, /* LED_FUNC */
+        { 18, MPP_UNUSED },
+        { 19, MPP_UNUSED },
+        { -1 },
+};
+
+static void __init ls_hgl_init(void)
+{
+        /*
+         * Setup basic Orion functions. Need to be called early.
+         */
+        orion5x_init();
+
+        orion5x_mpp_conf(ls_hgl_mpp_modes);
+
+        /*
+         * Configure peripherals.
+         */
+        orion5x_ehci0_init();
+        orion5x_ehci1_init();
+        orion5x_eth_init(&ls_hgl_eth_data);
+        orion5x_i2c_init();
+        orion5x_sata_init(&ls_hgl_sata_data);
+        orion5x_uart0_init();
+        orion5x_xor_init();
+
+        orion5x_setup_dev_boot_win(LS_HGL_NOR_BOOT_BASE,
+                                   LS_HGL_NOR_BOOT_SIZE);
+        platform_device_register(&ls_hgl_nor_flash);
+
+        platform_device_register(&ls_hgl_button_device);
+
+        platform_device_register(&ls_hgl_leds);
+
+        i2c_register_board_info(0, &ls_hgl_i2c_rtc, 1);
+
+        /* enable USB power */
+        gpio_set_value(LS_HGL_GPIO_USB_POWER, 1);
+
+        /* register power-off method */
+        pm_power_off = ls_hgl_power_off;
+
+        pr_info("%s: finished\n", __func__);
+}
+
+MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL")
+        /* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */
+        .phys_io        = ORION5X_REGS_PHYS_BASE,
+        .io_pg_offst    = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+        .boot_params    = 0x00000100,
+        .init_machine   = ls_hgl_init,
+        .map_io         = orion5x_map_io,
+        .init_irq       = orion5x_init_irq,
+        .timer          = &orion5x_timer,
+        .fixup          = tag_fixup_mem32,
+MACHINE_END