1 files changed, 28 insertions, 2 deletions

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index ba670db1fd37..3a904de4313e 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -652,14 +652,17 @@ static void __init pm_errata_configure(void)
                 /* Enable the l2 cache toggling in sleep logic */
                 enable_omap3630_toggle_l2_on_restore();
                 if (omap_rev() < OMAP3630_REV_ES1_2)
-                        pm34xx_errata |= PM_SDRC_WAKEUP_ERRATUM_i583;
+                        pm34xx_errata |= (PM_SDRC_WAKEUP_ERRATUM_i583 |
+                                          PM_PER_MEMORIES_ERRATUM_i582);
+        } else if (cpu_is_omap34xx()) {
+                pm34xx_errata |= PM_PER_MEMORIES_ERRATUM_i582;
         }
 }
 
 int __init omap3_pm_init(void)
 {
         struct power_state *pwrst, *tmp;
-        struct clockdomain *neon_clkdm, *mpu_clkdm;
+        struct clockdomain *neon_clkdm, *mpu_clkdm, *per_clkdm, *wkup_clkdm;
         int ret;
 
         if (!omap3_has_io_chain_ctrl())
@@ -711,6 +714,8 @@ int __init omap3_pm_init(void)
 
         neon_clkdm = clkdm_lookup("neon_clkdm");
         mpu_clkdm = clkdm_lookup("mpu_clkdm");
+        per_clkdm = clkdm_lookup("per_clkdm");
+        wkup_clkdm = clkdm_lookup("wkup_clkdm");
 
 #ifdef CONFIG_SUSPEND
         omap_pm_suspend = omap3_pm_suspend;
@@ -727,6 +732,27 @@ int __init omap3_pm_init(void)
         if (IS_PM34XX_ERRATUM(PM_RTA_ERRATUM_i608))
                 omap3630_ctrl_disable_rta();
 
+        /*
+         * The UART3/4 FIFO and the sidetone memory in McBSP2/3 are
+         * not correctly reset when the PER powerdomain comes back
+         * from OFF or OSWR when the CORE powerdomain is kept active.
+         * See OMAP36xx Erratum i582 "PER Domain reset issue after
+         * Domain-OFF/OSWR Wakeup".  This wakeup dependency is not a
+         * complete workaround.  The kernel must also prevent the PER
+         * powerdomain from going to OSWR/OFF while the CORE
+         * powerdomain is not going to OSWR/OFF.  And if PER last
+         * power state was off while CORE last power state was ON, the
+         * UART3/4 and McBSP2/3 SIDETONE devices need to run a
+         * self-test using their loopback tests; if that fails, those
+         * devices are unusable until the PER/CORE can complete a transition
+         * from ON to OSWR/OFF and then back to ON.
+         *
+         * XXX Technically this workaround is only needed if off-mode
+         * or OSWR is enabled.
+         */
+        if (IS_PM34XX_ERRATUM(PM_PER_MEMORIES_ERRATUM_i582))
+                clkdm_add_wkdep(per_clkdm, wkup_clkdm);
+
         clkdm_add_wkdep(neon_clkdm, mpu_clkdm);
         if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
                 omap3_secure_ram_storage =