diff options
Diffstat (limited to 'arch/arm/mach-omap1/board-voiceblue.c')
| -rw-r--r-- | arch/arm/mach-omap1/board-voiceblue.c | 257 |
1 files changed, 257 insertions, 0 deletions
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c new file mode 100644 index 000000000000..e42281988990 --- /dev/null +++ b/arch/arm/mach-omap1/board-voiceblue.c | |||
| @@ -0,0 +1,257 @@ | |||
| 1 | /* | ||
| 2 | * linux/arch/arm/mach-omap1/board-voiceblue.c | ||
| 3 | * | ||
| 4 | * Modified from board-generic.c | ||
| 5 | * | ||
| 6 | * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz> | ||
| 7 | * | ||
| 8 | * Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway). | ||
| 9 | * | ||
| 10 | * This program is free software; you can redistribute it and/or modify | ||
| 11 | * it under the terms of the GNU General Public License version 2 as | ||
| 12 | * published by the Free Software Foundation. | ||
| 13 | */ | ||
| 14 | |||
| 15 | #include <linux/delay.h> | ||
| 16 | #include <linux/device.h> | ||
| 17 | #include <linux/interrupt.h> | ||
| 18 | #include <linux/init.h> | ||
| 19 | #include <linux/kernel.h> | ||
| 20 | #include <linux/notifier.h> | ||
| 21 | #include <linux/reboot.h> | ||
| 22 | #include <linux/serial_8250.h> | ||
| 23 | #include <linux/serial_reg.h> | ||
| 24 | |||
| 25 | #include <asm/hardware.h> | ||
| 26 | #include <asm/mach-types.h> | ||
| 27 | #include <asm/mach/arch.h> | ||
| 28 | #include <asm/mach/map.h> | ||
| 29 | |||
| 30 | #include <asm/arch/gpio.h> | ||
| 31 | #include <asm/arch/tc.h> | ||
| 32 | #include <asm/arch/mux.h> | ||
| 33 | #include <asm/arch/usb.h> | ||
| 34 | #include <asm/arch/common.h> | ||
| 35 | |||
| 36 | extern void omap_init_time(void); | ||
| 37 | extern int omap_gpio_init(void); | ||
| 38 | |||
| 39 | static struct plat_serial8250_port voiceblue_ports[] = { | ||
| 40 | { | ||
| 41 | .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000), | ||
| 42 | .irq = OMAP_GPIO_IRQ(12), | ||
| 43 | .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, | ||
| 44 | .iotype = UPIO_MEM, | ||
| 45 | .regshift = 1, | ||
| 46 | .uartclk = 3686400, | ||
| 47 | }, | ||
| 48 | { | ||
| 49 | .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x50000), | ||
| 50 | .irq = OMAP_GPIO_IRQ(13), | ||
| 51 | .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, | ||
| 52 | .iotype = UPIO_MEM, | ||
| 53 | .regshift = 1, | ||
| 54 | .uartclk = 3686400, | ||
| 55 | }, | ||
| 56 | { | ||
| 57 | .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x60000), | ||
| 58 | .irq = OMAP_GPIO_IRQ(14), | ||
| 59 | .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, | ||
| 60 | .iotype = UPIO_MEM, | ||
| 61 | .regshift = 1, | ||
| 62 | .uartclk = 3686400, | ||
| 63 | }, | ||
| 64 | { | ||
| 65 | .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x70000), | ||
| 66 | .irq = OMAP_GPIO_IRQ(15), | ||
| 67 | .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, | ||
| 68 | .iotype = UPIO_MEM, | ||
| 69 | .regshift = 1, | ||
| 70 | .uartclk = 3686400, | ||
| 71 | }, | ||
| 72 | { }, | ||
| 73 | }; | ||
| 74 | |||
| 75 | static struct platform_device serial_device = { | ||
| 76 | .name = "serial8250", | ||
| 77 | .id = 1, | ||
| 78 | .dev = { | ||
| 79 | .platform_data = voiceblue_ports, | ||
| 80 | }, | ||
| 81 | }; | ||
| 82 | |||
| 83 | static int __init ext_uart_init(void) | ||
| 84 | { | ||
| 85 | return platform_device_register(&serial_device); | ||
| 86 | } | ||
| 87 | arch_initcall(ext_uart_init); | ||
| 88 | |||
| 89 | static struct resource voiceblue_smc91x_resources[] = { | ||
| 90 | [0] = { | ||
| 91 | .start = OMAP_CS2_PHYS + 0x300, | ||
| 92 | .end = OMAP_CS2_PHYS + 0x300 + 16, | ||
| 93 | .flags = IORESOURCE_MEM, | ||
| 94 | }, | ||
| 95 | [1] = { | ||
| 96 | .start = OMAP_GPIO_IRQ(8), | ||
| 97 | .end = OMAP_GPIO_IRQ(8), | ||
| 98 | .flags = IORESOURCE_IRQ, | ||
| 99 | }, | ||
| 100 | }; | ||
| 101 | |||
| 102 | static struct platform_device voiceblue_smc91x_device = { | ||
| 103 | .name = "smc91x", | ||
| 104 | .id = 0, | ||
| 105 | .num_resources = ARRAY_SIZE(voiceblue_smc91x_resources), | ||
| 106 | .resource = voiceblue_smc91x_resources, | ||
| 107 | }; | ||
| 108 | |||
| 109 | static struct platform_device *voiceblue_devices[] __initdata = { | ||
| 110 | &voiceblue_smc91x_device, | ||
| 111 | }; | ||
| 112 | |||
| 113 | static struct omap_usb_config voiceblue_usb_config __initdata = { | ||
| 114 | .hmc_mode = 3, | ||
| 115 | .register_host = 1, | ||
| 116 | .register_dev = 1, | ||
| 117 | .pins[0] = 2, | ||
| 118 | .pins[1] = 6, | ||
| 119 | .pins[2] = 6, | ||
| 120 | }; | ||
| 121 | |||
| 122 | static struct omap_board_config_kernel voiceblue_config[] = { | ||
| 123 | { OMAP_TAG_USB, &voiceblue_usb_config }, | ||
| 124 | }; | ||
| 125 | |||
| 126 | static void __init voiceblue_init_irq(void) | ||
| 127 | { | ||
| 128 | omap_init_irq(); | ||
| 129 | omap_gpio_init(); | ||
| 130 | } | ||
| 131 | |||
| 132 | static void __init voiceblue_init(void) | ||
| 133 | { | ||
| 134 | /* There is a good chance board is going up, so enable Power LED | ||
| 135 | * (it is connected through invertor) */ | ||
| 136 | omap_writeb(0x00, OMAP_LPG1_LCR); | ||
| 137 | /* Watchdog */ | ||
| 138 | omap_request_gpio(0); | ||
| 139 | /* smc91x reset */ | ||
| 140 | omap_request_gpio(7); | ||
| 141 | omap_set_gpio_direction(7, 0); | ||
| 142 | omap_set_gpio_dataout(7, 1); | ||
| 143 | udelay(2); /* wait at least 100ns */ | ||
| 144 | omap_set_gpio_dataout(7, 0); | ||
| 145 | mdelay(50); /* 50ms until PHY ready */ | ||
| 146 | /* smc91x interrupt pin */ | ||
| 147 | omap_request_gpio(8); | ||
| 148 | omap_set_gpio_edge_ctrl(8, OMAP_GPIO_RISING_EDGE); | ||
| 149 | /* 16C554 reset*/ | ||
| 150 | omap_request_gpio(6); | ||
| 151 | omap_set_gpio_direction(6, 0); | ||
| 152 | omap_set_gpio_dataout(6, 0); | ||
| 153 | /* 16C554 interrupt pins */ | ||
| 154 | omap_request_gpio(12); | ||
| 155 | omap_request_gpio(13); | ||
| 156 | omap_request_gpio(14); | ||
| 157 | omap_request_gpio(15); | ||
| 158 | omap_set_gpio_edge_ctrl(12, OMAP_GPIO_RISING_EDGE); | ||
| 159 | omap_set_gpio_edge_ctrl(13, OMAP_GPIO_RISING_EDGE); | ||
| 160 | omap_set_gpio_edge_ctrl(14, OMAP_GPIO_RISING_EDGE); | ||
| 161 | omap_set_gpio_edge_ctrl(15, OMAP_GPIO_RISING_EDGE); | ||
| 162 | |||
| 163 | platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); | ||
| 164 | omap_board_config = voiceblue_config; | ||
| 165 | omap_board_config_size = ARRAY_SIZE(voiceblue_config); | ||
| 166 | } | ||
| 167 | |||
| 168 | static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1}; | ||
| 169 | |||
| 170 | static void __init voiceblue_map_io(void) | ||
| 171 | { | ||
| 172 | omap_map_common_io(); | ||
| 173 | omap_serial_init(omap_serial_ports); | ||
| 174 | } | ||
| 175 | |||
| 176 | #define MACHINE_PANICED 1 | ||
| 177 | #define MACHINE_REBOOTING 2 | ||
| 178 | #define MACHINE_REBOOT 4 | ||
| 179 | static unsigned long machine_state; | ||
| 180 | |||
| 181 | static int panic_event(struct notifier_block *this, unsigned long event, | ||
| 182 | void *ptr) | ||
| 183 | { | ||
| 184 | if (test_and_set_bit(MACHINE_PANICED, &machine_state)) | ||
| 185 | return NOTIFY_DONE; | ||
| 186 | |||
| 187 | /* Flash Power LED | ||
| 188 | * (TODO: Enable clock right way (enabled in bootloader already)) */ | ||
| 189 | omap_writeb(0x78, OMAP_LPG1_LCR); | ||
| 190 | |||
| 191 | return NOTIFY_DONE; | ||
| 192 | } | ||
| 193 | |||
| 194 | static struct notifier_block panic_block = { | ||
| 195 | .notifier_call = panic_event, | ||
| 196 | }; | ||
| 197 | |||
| 198 | static int __init setup_notifier(void) | ||
| 199 | { | ||
| 200 | /* Setup panic notifier */ | ||
| 201 | notifier_chain_register(&panic_notifier_list, &panic_block); | ||
| 202 | |||
| 203 | return 0; | ||
| 204 | } | ||
| 205 | |||
| 206 | postcore_initcall(setup_notifier); | ||
| 207 | |||
| 208 | static int wdt_gpio_state; | ||
| 209 | |||
| 210 | void voiceblue_wdt_enable(void) | ||
| 211 | { | ||
| 212 | omap_set_gpio_direction(0, 0); | ||
| 213 | omap_set_gpio_dataout(0, 0); | ||
| 214 | omap_set_gpio_dataout(0, 1); | ||
| 215 | omap_set_gpio_dataout(0, 0); | ||
| 216 | wdt_gpio_state = 0; | ||
| 217 | } | ||
| 218 | |||
| 219 | void voiceblue_wdt_disable(void) | ||
| 220 | { | ||
| 221 | omap_set_gpio_dataout(0, 0); | ||
| 222 | omap_set_gpio_dataout(0, 1); | ||
| 223 | omap_set_gpio_dataout(0, 0); | ||
| 224 | omap_set_gpio_direction(0, 1); | ||
| 225 | } | ||
| 226 | |||
| 227 | void voiceblue_wdt_ping(void) | ||
| 228 | { | ||
| 229 | if (test_bit(MACHINE_REBOOT, &machine_state)) | ||
| 230 | return; | ||
| 231 | |||
| 232 | wdt_gpio_state = !wdt_gpio_state; | ||
| 233 | omap_set_gpio_dataout(0, wdt_gpio_state); | ||
| 234 | } | ||
| 235 | |||
| 236 | void voiceblue_reset(void) | ||
| 237 | { | ||
| 238 | set_bit(MACHINE_REBOOT, &machine_state); | ||
| 239 | voiceblue_wdt_enable(); | ||
| 240 | while (1) ; | ||
| 241 | } | ||
| 242 | |||
| 243 | EXPORT_SYMBOL(voiceblue_wdt_enable); | ||
| 244 | EXPORT_SYMBOL(voiceblue_wdt_disable); | ||
| 245 | EXPORT_SYMBOL(voiceblue_wdt_ping); | ||
| 246 | |||
| 247 | MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") | ||
| 248 | /* Maintainer: Ladislav Michl <michl@2n.cz> */ | ||
| 249 | .phys_ram = 0x10000000, | ||
| 250 | .phys_io = 0xfff00000, | ||
| 251 | .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, | ||
| 252 | .boot_params = 0x10000100, | ||
| 253 | .map_io = voiceblue_map_io, | ||
| 254 | .init_irq = voiceblue_init_irq, | ||
| 255 | .init_machine = voiceblue_init, | ||
| 256 | .timer = &omap_timer, | ||
| 257 | MACHINE_END | ||
