1 files changed, 155 insertions, 0 deletions

diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
new file mode 100644
index 000000000000..61e5e583603b
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
@@ -0,0 +1,155 @@
+/*
+ * arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
+ *
+ * Buffalo WXL (Terastation Duo) Setup routines
+ *
+ * sebastien requiem <sebastien@requiem.fr>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/i2c.h>
+#include <mach/mv78xx0.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include "common.h"
+#include "mpp.h"
+
+
+/* This arch has 2 Giga Ethernet */
+
+static struct mv643xx_eth_platform_data db78x00_ge00_data = {
+        .phy_addr       = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv643xx_eth_platform_data db78x00_ge01_data = {
+        .phy_addr       = MV643XX_ETH_PHY_ADDR(8),
+};
+
+
+/* 2 SATA controller supporting HotPlug */
+
+static struct mv_sata_platform_data db78x00_sata_data = {
+        .n_ports        = 2,
+};
+
+static struct i2c_board_info __initdata db78x00_i2c_rtc = {
+        I2C_BOARD_INFO("ds1338", 0x68),
+};
+
+
+static unsigned int wxl_mpp_config[] __initdata = {
+        MPP0_GE1_TXCLK,
+        MPP1_GE1_TXCTL,
+        MPP2_GE1_RXCTL,
+        MPP3_GE1_RXCLK,
+        MPP4_GE1_TXD0,
+        MPP5_GE1_TXD1,
+        MPP6_GE1_TXD2,
+        MPP7_GE1_TXD3,
+        MPP8_GE1_RXD0,
+        MPP9_GE1_RXD1,
+        MPP10_GE1_RXD2,
+        MPP11_GE1_RXD3,
+        MPP12_GPIO,
+        MPP13_SYSRST_OUTn,
+        MPP14_SATA1_ACTn,
+        MPP15_SATA0_ACTn,
+        MPP16_GPIO,
+        MPP17_GPIO,
+        MPP18_GPIO,
+        MPP19_GPIO,
+        MPP20_GPIO,
+        MPP21_GPIO,
+        MPP22_GPIO,
+        MPP23_GPIO,
+        MPP24_UA2_TXD,
+        MPP25_UA2_RXD,
+        MPP26_UA2_CTSn,
+        MPP27_UA2_RTSn,
+        MPP28_GPIO,
+        MPP29_SYSRST_OUTn,
+        MPP30_GPIO,
+        MPP31_GPIO,
+        MPP32_GPIO,
+        MPP33_GPIO,
+        MPP34_GPIO,
+        MPP35_GPIO,
+        MPP36_GPIO,
+        MPP37_GPIO,
+        MPP38_GPIO,
+        MPP39_GPIO,
+        MPP40_UNUSED,
+        MPP41_UNUSED,
+        MPP42_UNUSED,
+        MPP43_UNUSED,
+        MPP44_UNUSED,
+        MPP45_UNUSED,
+        MPP46_UNUSED,
+        MPP47_UNUSED,
+        MPP48_SATA1_ACTn,
+        MPP49_SATA0_ACTn,
+        0
+};
+
+
+static void __init wxl_init(void)
+{
+        /*
+         * Basic MV78xx0 setup. Needs to be called early.
+         */
+        mv78xx0_init();
+        mv78xx0_mpp_conf(wxl_mpp_config);
+
+        /*
+         * Partition on-chip peripherals between the two CPU cores.
+         */
+        mv78xx0_ehci0_init();
+        mv78xx0_ehci1_init();
+        mv78xx0_ehci2_init();
+        mv78xx0_ge00_init(&db78x00_ge00_data);
+        mv78xx0_ge01_init(&db78x00_ge01_data);
+        mv78xx0_sata_init(&db78x00_sata_data);
+        mv78xx0_uart0_init();
+        mv78xx0_uart1_init();
+        mv78xx0_uart2_init();
+        mv78xx0_uart3_init();
+        mv78xx0_i2c_init();
+        i2c_register_board_info(0, &db78x00_i2c_rtc, 1);
+}
+
+static int __init wxl_pci_init(void)
+{
+        if (machine_is_terastation_wxl()) {
+                /*
+                 * Assign the x16 PCIe slot on the board to CPU core
+                 * #0, and let CPU core #1 have the four x1 slots.
+                 */
+                if (mv78xx0_core_index() == 0)
+                        mv78xx0_pcie_init(0, 1);
+                else
+                        mv78xx0_pcie_init(1, 0);
+        }
+
+        return 0;
+}
+subsys_initcall(wxl_pci_init);
+
+MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL")
+        /* Maintainer: Sebastien Requiem <sebastien@requiem.fr> */
+        .phys_io        = MV78XX0_REGS_PHYS_BASE,
+        .io_pg_offst    = ((MV78XX0_REGS_VIRT_BASE) >> 18) & 0xfffc,
+        .boot_params    = 0x00000100,
+        .init_machine   = wxl_init,
+        .map_io         = mv78xx0_map_io,
+        .init_irq       = mv78xx0_init_irq,
+        .timer          = &mv78xx0_timer,
+MACHINE_END