1 files changed, 27 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
index 25da82a03110..e8e781656b3f 100644
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
@@ -12,6 +12,19 @@
                 pinctrl-0 = <&pinctrl_cubox_i_ir>;
         };
 
+        pwmleds {
+                compatible = "pwm-leds";
+                pinctrl-names = "default";
+                pinctrl-0 = <&pinctrl_cubox_i_pwm1>;
+
+                front {
+                        active-low;
+                        label = "imx6:red:front";
+                        max-brightness = <248>;
+                        pwms = <&pwm1 0 50000>;
+                };
+        };
+
         regulators {
                 compatible = "simple-bus";
 
@@ -109,6 +122,10 @@
                         >;
                 };
 
+                pinctrl_cubox_i_pwm1: cubox-i-pwm1-front-led {
+                        fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0>;
+                };
+
                 pinctrl_cubox_i_spdif: cubox-i-spdif {
                         fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
                 };
@@ -117,6 +134,14 @@
                         fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>;
                 };
 
+                pinctrl_cubox_i_usbotg_id: cubox-i-usbotg-id {
+                        /*
+                         * The Cubox-i pulls this low, but as it's pointless
+                         * leaving it as a pull-up, even if it is just 10uA.
+                         */
+                        fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
+                };
+
                 pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus {
                         fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x4001b0b0>;
                 };
@@ -153,6 +178,8 @@
 };
 
 &usbotg {
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_cubox_i_usbotg_id>;
         vbus-supply = <&reg_usbotg_vbus>;
         status = "okay";
 };