diff options
Diffstat (limited to 'arch/alpha/include/asm/jensen.h')
-rw-r--r-- | arch/alpha/include/asm/jensen.h | 346 |
1 files changed, 346 insertions, 0 deletions
diff --git a/arch/alpha/include/asm/jensen.h b/arch/alpha/include/asm/jensen.h new file mode 100644 index 000000000000..964b06ead43b --- /dev/null +++ b/arch/alpha/include/asm/jensen.h | |||
@@ -0,0 +1,346 @@ | |||
1 | #ifndef __ALPHA_JENSEN_H | ||
2 | #define __ALPHA_JENSEN_H | ||
3 | |||
4 | #include <asm/compiler.h> | ||
5 | |||
6 | /* | ||
7 | * Defines for the AlphaPC EISA IO and memory address space. | ||
8 | */ | ||
9 | |||
10 | /* | ||
11 | * NOTE! The memory operations do not set any memory barriers, as it's | ||
12 | * not needed for cases like a frame buffer that is essentially memory-like. | ||
13 | * You need to do them by hand if the operations depend on ordering. | ||
14 | * | ||
15 | * Similarly, the port IO operations do a "mb" only after a write operation: | ||
16 | * if an mb is needed before (as in the case of doing memory mapped IO | ||
17 | * first, and then a port IO operation to the same device), it needs to be | ||
18 | * done by hand. | ||
19 | * | ||
20 | * After the above has bitten me 100 times, I'll give up and just do the | ||
21 | * mb all the time, but right now I'm hoping this will work out. Avoiding | ||
22 | * mb's may potentially be a noticeable speed improvement, but I can't | ||
23 | * honestly say I've tested it. | ||
24 | * | ||
25 | * Handling interrupts that need to do mb's to synchronize to non-interrupts | ||
26 | * is another fun race area. Don't do it (because if you do, I'll have to | ||
27 | * do *everything* with interrupts disabled, ugh). | ||
28 | */ | ||
29 | |||
30 | /* | ||
31 | * EISA Interrupt Acknowledge address | ||
32 | */ | ||
33 | #define EISA_INTA (IDENT_ADDR + 0x100000000UL) | ||
34 | |||
35 | /* | ||
36 | * FEPROM addresses | ||
37 | */ | ||
38 | #define EISA_FEPROM0 (IDENT_ADDR + 0x180000000UL) | ||
39 | #define EISA_FEPROM1 (IDENT_ADDR + 0x1A0000000UL) | ||
40 | |||
41 | /* | ||
42 | * VL82C106 base address | ||
43 | */ | ||
44 | #define EISA_VL82C106 (IDENT_ADDR + 0x1C0000000UL) | ||
45 | |||
46 | /* | ||
47 | * EISA "Host Address Extension" address (bits 25-31 of the EISA address) | ||
48 | */ | ||
49 | #define EISA_HAE (IDENT_ADDR + 0x1D0000000UL) | ||
50 | |||
51 | /* | ||
52 | * "SYSCTL" register address | ||
53 | */ | ||
54 | #define EISA_SYSCTL (IDENT_ADDR + 0x1E0000000UL) | ||
55 | |||
56 | /* | ||
57 | * "spare" register address | ||
58 | */ | ||
59 | #define EISA_SPARE (IDENT_ADDR + 0x1F0000000UL) | ||
60 | |||
61 | /* | ||
62 | * EISA memory address offset | ||
63 | */ | ||
64 | #define EISA_MEM (IDENT_ADDR + 0x200000000UL) | ||
65 | |||
66 | /* | ||
67 | * EISA IO address offset | ||
68 | */ | ||
69 | #define EISA_IO (IDENT_ADDR + 0x300000000UL) | ||
70 | |||
71 | |||
72 | #ifdef __KERNEL__ | ||
73 | |||
74 | #ifndef __EXTERN_INLINE | ||
75 | #define __EXTERN_INLINE extern inline | ||
76 | #define __IO_EXTERN_INLINE | ||
77 | #endif | ||
78 | |||
79 | /* | ||
80 | * Handle the "host address register". This needs to be set | ||
81 | * to the high 7 bits of the EISA address. This is also needed | ||
82 | * for EISA IO addresses, which are only 16 bits wide (the | ||
83 | * hae needs to be set to 0). | ||
84 | * | ||
85 | * HAE isn't needed for the local IO operations, though. | ||
86 | */ | ||
87 | |||
88 | #define JENSEN_HAE_ADDRESS EISA_HAE | ||
89 | #define JENSEN_HAE_MASK 0x1ffffff | ||
90 | |||
91 | __EXTERN_INLINE void jensen_set_hae(unsigned long addr) | ||
92 | { | ||
93 | /* hae on the Jensen is bits 31:25 shifted right */ | ||
94 | addr >>= 25; | ||
95 | if (addr != alpha_mv.hae_cache) | ||
96 | set_hae(addr); | ||
97 | } | ||
98 | |||
99 | #define vuip volatile unsigned int * | ||
100 | |||
101 | /* | ||
102 | * IO functions | ||
103 | * | ||
104 | * The "local" functions are those that don't go out to the EISA bus, | ||
105 | * but instead act on the VL82C106 chip directly.. This is mainly the | ||
106 | * keyboard, RTC, printer and first two serial lines.. | ||
107 | * | ||
108 | * The local stuff makes for some complications, but it seems to be | ||
109 | * gone in the PCI version. I hope I can get DEC suckered^H^H^H^H^H^H^H^H | ||
110 | * convinced that I need one of the newer machines. | ||
111 | */ | ||
112 | |||
113 | static inline unsigned int jensen_local_inb(unsigned long addr) | ||
114 | { | ||
115 | return 0xff & *(vuip)((addr << 9) + EISA_VL82C106); | ||
116 | } | ||
117 | |||
118 | static inline void jensen_local_outb(u8 b, unsigned long addr) | ||
119 | { | ||
120 | *(vuip)((addr << 9) + EISA_VL82C106) = b; | ||
121 | mb(); | ||
122 | } | ||
123 | |||
124 | static inline unsigned int jensen_bus_inb(unsigned long addr) | ||
125 | { | ||
126 | long result; | ||
127 | |||
128 | jensen_set_hae(0); | ||
129 | result = *(volatile int *)((addr << 7) + EISA_IO + 0x00); | ||
130 | return __kernel_extbl(result, addr & 3); | ||
131 | } | ||
132 | |||
133 | static inline void jensen_bus_outb(u8 b, unsigned long addr) | ||
134 | { | ||
135 | jensen_set_hae(0); | ||
136 | *(vuip)((addr << 7) + EISA_IO + 0x00) = b * 0x01010101; | ||
137 | mb(); | ||
138 | } | ||
139 | |||
140 | /* | ||
141 | * It seems gcc is not very good at optimizing away logical | ||
142 | * operations that result in operations across inline functions. | ||
143 | * Which is why this is a macro. | ||
144 | */ | ||
145 | |||
146 | #define jensen_is_local(addr) ( \ | ||
147 | /* keyboard */ (addr == 0x60 || addr == 0x64) || \ | ||
148 | /* RTC */ (addr == 0x170 || addr == 0x171) || \ | ||
149 | /* mb COM2 */ (addr >= 0x2f8 && addr <= 0x2ff) || \ | ||
150 | /* mb LPT1 */ (addr >= 0x3bc && addr <= 0x3be) || \ | ||
151 | /* mb COM2 */ (addr >= 0x3f8 && addr <= 0x3ff)) | ||
152 | |||
153 | __EXTERN_INLINE u8 jensen_inb(unsigned long addr) | ||
154 | { | ||
155 | if (jensen_is_local(addr)) | ||
156 | return jensen_local_inb(addr); | ||
157 | else | ||
158 | return jensen_bus_inb(addr); | ||
159 | } | ||
160 | |||
161 | __EXTERN_INLINE void jensen_outb(u8 b, unsigned long addr) | ||
162 | { | ||
163 | if (jensen_is_local(addr)) | ||
164 | jensen_local_outb(b, addr); | ||
165 | else | ||
166 | jensen_bus_outb(b, addr); | ||
167 | } | ||
168 | |||
169 | __EXTERN_INLINE u16 jensen_inw(unsigned long addr) | ||
170 | { | ||
171 | long result; | ||
172 | |||
173 | jensen_set_hae(0); | ||
174 | result = *(volatile int *) ((addr << 7) + EISA_IO + 0x20); | ||
175 | result >>= (addr & 3) * 8; | ||
176 | return 0xffffUL & result; | ||
177 | } | ||
178 | |||
179 | __EXTERN_INLINE u32 jensen_inl(unsigned long addr) | ||
180 | { | ||
181 | jensen_set_hae(0); | ||
182 | return *(vuip) ((addr << 7) + EISA_IO + 0x60); | ||
183 | } | ||
184 | |||
185 | __EXTERN_INLINE void jensen_outw(u16 b, unsigned long addr) | ||
186 | { | ||
187 | jensen_set_hae(0); | ||
188 | *(vuip) ((addr << 7) + EISA_IO + 0x20) = b * 0x00010001; | ||
189 | mb(); | ||
190 | } | ||
191 | |||
192 | __EXTERN_INLINE void jensen_outl(u32 b, unsigned long addr) | ||
193 | { | ||
194 | jensen_set_hae(0); | ||
195 | *(vuip) ((addr << 7) + EISA_IO + 0x60) = b; | ||
196 | mb(); | ||
197 | } | ||
198 | |||
199 | /* | ||
200 | * Memory functions. | ||
201 | */ | ||
202 | |||
203 | __EXTERN_INLINE u8 jensen_readb(const volatile void __iomem *xaddr) | ||
204 | { | ||
205 | unsigned long addr = (unsigned long) xaddr; | ||
206 | long result; | ||
207 | |||
208 | jensen_set_hae(addr); | ||
209 | addr &= JENSEN_HAE_MASK; | ||
210 | result = *(volatile int *) ((addr << 7) + EISA_MEM + 0x00); | ||
211 | result >>= (addr & 3) * 8; | ||
212 | return 0xffUL & result; | ||
213 | } | ||
214 | |||
215 | __EXTERN_INLINE u16 jensen_readw(const volatile void __iomem *xaddr) | ||
216 | { | ||
217 | unsigned long addr = (unsigned long) xaddr; | ||
218 | long result; | ||
219 | |||
220 | jensen_set_hae(addr); | ||
221 | addr &= JENSEN_HAE_MASK; | ||
222 | result = *(volatile int *) ((addr << 7) + EISA_MEM + 0x20); | ||
223 | result >>= (addr & 3) * 8; | ||
224 | return 0xffffUL & result; | ||
225 | } | ||
226 | |||
227 | __EXTERN_INLINE u32 jensen_readl(const volatile void __iomem *xaddr) | ||
228 | { | ||
229 | unsigned long addr = (unsigned long) xaddr; | ||
230 | jensen_set_hae(addr); | ||
231 | addr &= JENSEN_HAE_MASK; | ||
232 | return *(vuip) ((addr << 7) + EISA_MEM + 0x60); | ||
233 | } | ||
234 | |||
235 | __EXTERN_INLINE u64 jensen_readq(const volatile void __iomem *xaddr) | ||
236 | { | ||
237 | unsigned long addr = (unsigned long) xaddr; | ||
238 | unsigned long r0, r1; | ||
239 | |||
240 | jensen_set_hae(addr); | ||
241 | addr &= JENSEN_HAE_MASK; | ||
242 | addr = (addr << 7) + EISA_MEM + 0x60; | ||
243 | r0 = *(vuip) (addr); | ||
244 | r1 = *(vuip) (addr + (4 << 7)); | ||
245 | return r1 << 32 | r0; | ||
246 | } | ||
247 | |||
248 | __EXTERN_INLINE void jensen_writeb(u8 b, volatile void __iomem *xaddr) | ||
249 | { | ||
250 | unsigned long addr = (unsigned long) xaddr; | ||
251 | jensen_set_hae(addr); | ||
252 | addr &= JENSEN_HAE_MASK; | ||
253 | *(vuip) ((addr << 7) + EISA_MEM + 0x00) = b * 0x01010101; | ||
254 | } | ||
255 | |||
256 | __EXTERN_INLINE void jensen_writew(u16 b, volatile void __iomem *xaddr) | ||
257 | { | ||
258 | unsigned long addr = (unsigned long) xaddr; | ||
259 | jensen_set_hae(addr); | ||
260 | addr &= JENSEN_HAE_MASK; | ||
261 | *(vuip) ((addr << 7) + EISA_MEM + 0x20) = b * 0x00010001; | ||
262 | } | ||
263 | |||
264 | __EXTERN_INLINE void jensen_writel(u32 b, volatile void __iomem *xaddr) | ||
265 | { | ||
266 | unsigned long addr = (unsigned long) xaddr; | ||
267 | jensen_set_hae(addr); | ||
268 | addr &= JENSEN_HAE_MASK; | ||
269 | *(vuip) ((addr << 7) + EISA_MEM + 0x60) = b; | ||
270 | } | ||
271 | |||
272 | __EXTERN_INLINE void jensen_writeq(u64 b, volatile void __iomem *xaddr) | ||
273 | { | ||
274 | unsigned long addr = (unsigned long) xaddr; | ||
275 | jensen_set_hae(addr); | ||
276 | addr &= JENSEN_HAE_MASK; | ||
277 | addr = (addr << 7) + EISA_MEM + 0x60; | ||
278 | *(vuip) (addr) = b; | ||
279 | *(vuip) (addr + (4 << 7)) = b >> 32; | ||
280 | } | ||
281 | |||
282 | __EXTERN_INLINE void __iomem *jensen_ioportmap(unsigned long addr) | ||
283 | { | ||
284 | return (void __iomem *)addr; | ||
285 | } | ||
286 | |||
287 | __EXTERN_INLINE void __iomem *jensen_ioremap(unsigned long addr, | ||
288 | unsigned long size) | ||
289 | { | ||
290 | return (void __iomem *)(addr + 0x100000000ul); | ||
291 | } | ||
292 | |||
293 | __EXTERN_INLINE int jensen_is_ioaddr(unsigned long addr) | ||
294 | { | ||
295 | return (long)addr >= 0; | ||
296 | } | ||
297 | |||
298 | __EXTERN_INLINE int jensen_is_mmio(const volatile void __iomem *addr) | ||
299 | { | ||
300 | return (unsigned long)addr >= 0x100000000ul; | ||
301 | } | ||
302 | |||
303 | /* New-style ioread interface. All the routines are so ugly for Jensen | ||
304 | that it doesn't make sense to merge them. */ | ||
305 | |||
306 | #define IOPORT(OS, NS) \ | ||
307 | __EXTERN_INLINE unsigned int jensen_ioread##NS(void __iomem *xaddr) \ | ||
308 | { \ | ||
309 | if (jensen_is_mmio(xaddr)) \ | ||
310 | return jensen_read##OS(xaddr - 0x100000000ul); \ | ||
311 | else \ | ||
312 | return jensen_in##OS((unsigned long)xaddr); \ | ||
313 | } \ | ||
314 | __EXTERN_INLINE void jensen_iowrite##NS(u##NS b, void __iomem *xaddr) \ | ||
315 | { \ | ||
316 | if (jensen_is_mmio(xaddr)) \ | ||
317 | jensen_write##OS(b, xaddr - 0x100000000ul); \ | ||
318 | else \ | ||
319 | jensen_out##OS(b, (unsigned long)xaddr); \ | ||
320 | } | ||
321 | |||
322 | IOPORT(b, 8) | ||
323 | IOPORT(w, 16) | ||
324 | IOPORT(l, 32) | ||
325 | |||
326 | #undef IOPORT | ||
327 | |||
328 | #undef vuip | ||
329 | |||
330 | #undef __IO_PREFIX | ||
331 | #define __IO_PREFIX jensen | ||
332 | #define jensen_trivial_rw_bw 0 | ||
333 | #define jensen_trivial_rw_lq 0 | ||
334 | #define jensen_trivial_io_bw 0 | ||
335 | #define jensen_trivial_io_lq 0 | ||
336 | #define jensen_trivial_iounmap 1 | ||
337 | #include <asm/io_trivial.h> | ||
338 | |||
339 | #ifdef __IO_EXTERN_INLINE | ||
340 | #undef __EXTERN_INLINE | ||
341 | #undef __IO_EXTERN_INLINE | ||
342 | #endif | ||
343 | |||
344 | #endif /* __KERNEL__ */ | ||
345 | |||
346 | #endif /* __ALPHA_JENSEN_H */ | ||