1 files changed, 2 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
index f71f8083c2ae..63c659800c03 100644
--- a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
@@ -2,11 +2,12 @@ GPIO controlled regulators
 Required properties:
 - compatible            : Must be "regulator-gpio".
+- states                : Selection of available voltages and GPIO configs.
+                          if there are no states, then use a fixed regulator
 Optional properties:
 - enable-gpio           : GPIO to use to enable/disable the regulator.
 - gpios                 : GPIO group used to control voltage.
- states                : Selection of available voltages and GPIO configs.
 - startup-delay-us      : Startup time in microseconds.
 - enable-active-high    : Polarity of GPIO is active high (default is low).

diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt index f71f8083c2ae..63c659800c03 100644 --- a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
@@ -2,11 +2,12 @@ GPIO controlled regulators
2		2
3	Required properties:	3	Required properties:
4	- compatible : Must be "regulator-gpio".	4	- compatible : Must be "regulator-gpio".
		5	- states : Selection of available voltages and GPIO configs.
		6	if there are no states, then use a fixed regulator
5		7
6	Optional properties:	8	Optional properties:
7	- enable-gpio : GPIO to use to enable/disable the regulator.	9	- enable-gpio : GPIO to use to enable/disable the regulator.
8	- gpios : GPIO group used to control voltage.	10	- gpios : GPIO group used to control voltage.
9	- states : Selection of available voltages and GPIO configs.
10	- startup-delay-us : Startup time in microseconds.	11	- startup-delay-us : Startup time in microseconds.
11	- enable-active-high : Polarity of GPIO is active high (default is low).	12	- enable-active-high : Polarity of GPIO is active high (default is low).
12		13