1 files changed, 11 insertions, 14 deletions

diff --git a/Documentation/thinkpad-acpi.txt b/Documentation/thinkpad-acpi.txt
index 2d4803359a04..9e6b94face4b 100644
--- a/Documentation/thinkpad-acpi.txt
+++ b/Documentation/thinkpad-acpi.txt
@@ -138,7 +138,7 @@ Hot keys
 --------
 
 procfs: /proc/acpi/ibm/hotkey
-sysfs device attribute: hotkey/*
+sysfs device attribute: hotkey_*
 
 Without this driver, only the Fn-F4 key (sleep button) generates an
 ACPI event. With the driver loaded, the hotkey feature enabled and the
@@ -196,10 +196,7 @@ The following commands can be written to the /proc/acpi/ibm/hotkey file:
 
 sysfs notes:
 
-        The hot keys attributes are in a hotkey/ subdirectory off the
-        thinkpad device.
-
-        bios_enabled:
+        hotkey_bios_enabled:
                 Returns the status of the hot keys feature when
                 thinkpad-acpi was loaded.  Upon module unload, the hot
                 key feature status will be restored to this value.
@@ -207,19 +204,19 @@ sysfs notes:
                 0: hot keys were disabled
                 1: hot keys were enabled
 
-        bios_mask:
+        hotkey_bios_mask:
                 Returns the hot keys mask when thinkpad-acpi was loaded.
                 Upon module unload, the hot keys mask will be restored
                 to this value.
 
-        enable:
+        hotkey_enable:
                 Enables/disables the hot keys feature, and reports
                 current status of the hot keys feature.
 
                 0: disables the hot keys feature / feature disabled
                 1: enables the hot keys feature / feature enabled
 
-        mask:
+        hotkey_mask:
                 bit mask to enable ACPI event generation for each hot
                 key (see above).  Returns the current status of the hot
                 keys mask, and allows one to modify it.
@@ -229,7 +226,7 @@ Bluetooth
 ---------
 
 procfs: /proc/acpi/ibm/bluetooth
-sysfs device attribute: bluetooth/enable
+sysfs device attribute: bluetooth_enable
 
 This feature shows the presence and current state of a ThinkPad
 Bluetooth device in the internal ThinkPad CDC slot.
@@ -244,7 +241,7 @@ If Bluetooth is installed, the following commands can be used:
 Sysfs notes:
 
         If the Bluetooth CDC card is installed, it can be enabled /
-        disabled through the "bluetooth/enable" thinkpad-acpi device
+        disabled through the "bluetooth_enable" thinkpad-acpi device
         attribute, and its current status can also be queried.
 
         enable:
@@ -252,7 +249,7 @@ Sysfs notes:
                 1: enables Bluetooth / Bluetooth is enabled.
 
         Note: this interface will be probably be superseeded by the
-        generic rfkill class.
+        generic rfkill class, so it is NOT to be considered stable yet.
 
 Video output control -- /proc/acpi/ibm/video
 --------------------------------------------
@@ -898,7 +895,7 @@ EXPERIMENTAL: WAN
 -----------------
 
 procfs: /proc/acpi/ibm/wan
-sysfs device attribute: wwan/enable
+sysfs device attribute: wwan_enable
 
 This feature is marked EXPERIMENTAL because the implementation
 directly accesses hardware registers and may not work as expected. USE
@@ -921,7 +918,7 @@ If the W-WAN card is installed, the following commands can be used:
 Sysfs notes:
 
         If the W-WAN card is installed, it can be enabled /
-        disabled through the "wwan/enable" thinkpad-acpi device
+        disabled through the "wwan_enable" thinkpad-acpi device
         attribute, and its current status can also be queried.
 
         enable:
@@ -929,7 +926,7 @@ Sysfs notes:
                 1: enables WWAN card / WWAN card is enabled.
 
         Note: this interface will be probably be superseeded by the
-        generic rfkill class.
+        generic rfkill class, so it is NOT to be considered stable yet.
 
 Multiple Commands, Module Parameters
 ------------------------------------