1 files changed, 29 insertions, 0 deletions

diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index 5dd960d75174..91df678fb7f8 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -238,6 +238,18 @@ ad_select
 
         This option was added in bonding version 3.4.0.
 
+all_slaves_active
+
+        Specifies that duplicate frames (received on inactive ports) should be
+        dropped (0) or delivered (1).
+
+        Normally, bonding will drop duplicate frames (received on inactive
+        ports), which is desirable for most users. But there are some times
+        it is nice to allow duplicate frames to be delivered.
+
+        The default value is 0 (drop duplicate frames received on inactive
+        ports).
+
 arp_interval
 
         Specifies the ARP link monitoring frequency in milliseconds.
@@ -433,6 +445,23 @@ miimon
         determined.  See the High Availability section for additional
         information.  The default value is 0.
 
+min_links
+
+        Specifies the minimum number of links that must be active before
+        asserting carrier. It is similar to the Cisco EtherChannel min-links
+        feature. This allows setting the minimum number of member ports that
+        must be up (link-up state) before marking the bond device as up
+        (carrier on). This is useful for situations where higher level services
+        such as clustering want to ensure a minimum number of low bandwidth
+        links are active before switchover. This option only affect 802.3ad
+        mode.
+
+        The default value is 0. This will cause carrier to be asserted (for
+        802.3ad mode) whenever there is an active aggregator, regardless of the
+        number of available links in that aggregator. Note that, because an
+        aggregator cannot be active without at least one available link,
+        setting this option to 0 or to 1 has the exact same effect.
+
 mode
 
         Specifies one of the bonding policies. The default is