aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/input
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/input')
-rw-r--r--Documentation/input/sentelic.txt475
1 files changed, 475 insertions, 0 deletions
diff --git a/Documentation/input/sentelic.txt b/Documentation/input/sentelic.txt
new file mode 100644
index 000000000000..f7160a2fb6a2
--- /dev/null
+++ b/Documentation/input/sentelic.txt
@@ -0,0 +1,475 @@
1Copyright (C) 2002-2008 Sentelic Corporation.
2Last update: Oct-31-2008
3
4==============================================================================
5* Finger Sensing Pad Intellimouse Mode(scrolling wheel, 4th and 5th buttons)
6==============================================================================
7A) MSID 4: Scrolling wheel mode plus Forward page(4th button) and Backward
8 page (5th button)
9@1. Set sample rate to 200;
10@2. Set sample rate to 200;
11@3. Set sample rate to 80;
12@4. Issuing the "Get device ID" command (0xF2) and waits for the response;
13@5. FSP will respond 0x04.
14
15Packet 1
16 Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
17BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
18 1 |Y|X|y|x|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 | | |B|F|W|W|W|W|
19 |---------------| |---------------| |---------------| |---------------|
20
21Byte 1: Bit7 => Y overflow
22 Bit6 => X overflow
23 Bit5 => Y sign bit
24 Bit4 => X sign bit
25 Bit3 => 1
26 Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
27 Bit1 => Right Button, 1 is pressed, 0 is not pressed.
28 Bit0 => Left Button, 1 is pressed, 0 is not pressed.
29Byte 2: X Movement(9-bit 2's complement integers)
30Byte 3: Y Movement(9-bit 2's complement integers)
31Byte 4: Bit3~Bit0 => the scrolling wheel's movement since the last data report.
32 valid values, -8 ~ +7
33 Bit4 => 1 = 4th mouse button is pressed, Forward one page.
34 0 = 4th mouse button is not pressed.
35 Bit5 => 1 = 5th mouse button is pressed, Backward one page.
36 0 = 5th mouse button is not pressed.
37
38B) MSID 6: Horizontal and Vertical scrolling.
39@ Set bit 1 in register 0x40 to 1
40
41# FSP replaces scrolling wheel's movement as 4 bits to show horizontal and
42 vertical scrolling.
43
44Packet 1
45 Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
46BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
47 1 |Y|X|y|x|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 | | |B|F|l|r|u|d|
48 |---------------| |---------------| |---------------| |---------------|
49
50Byte 1: Bit7 => Y overflow
51 Bit6 => X overflow
52 Bit5 => Y sign bit
53 Bit4 => X sign bit
54 Bit3 => 1
55 Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
56 Bit1 => Right Button, 1 is pressed, 0 is not pressed.
57 Bit0 => Left Button, 1 is pressed, 0 is not pressed.
58Byte 2: X Movement(9-bit 2's complement integers)
59Byte 3: Y Movement(9-bit 2's complement integers)
60Byte 4: Bit0 => the Vertical scrolling movement downward.
61 Bit1 => the Vertical scrolling movement upward.
62 Bit2 => the Vertical scrolling movement rightward.
63 Bit3 => the Vertical scrolling movement leftward.
64 Bit4 => 1 = 4th mouse button is pressed, Forward one page.
65 0 = 4th mouse button is not pressed.
66 Bit5 => 1 = 5th mouse button is pressed, Backward one page.
67 0 = 5th mouse button is not pressed.
68
69C) MSID 7:
70# FSP uses 2 packets(8 Bytes) data to represent Absolute Position
71 so we have PACKET NUMBER to identify packets.
72 If PACKET NUMBER is 0, the packet is Packet 1.
73 If PACKET NUMBER is 1, the packet is Packet 2.
74 Please count this number in program.
75
76# MSID6 special packet will be enable at the same time when enable MSID 7.
77
78==============================================================================
79* Absolute position for STL3886-G0.
80==============================================================================
81@ Set bit 2 or 3 in register 0x40 to 1
82@ Set bit 6 in register 0x40 to 1
83
84Packet 1 (ABSOLUTE POSITION)
85 Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
86BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
87 1 |0|1|V|1|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|d|u|X|X|Y|Y|
88 |---------------| |---------------| |---------------| |---------------|
89
90Byte 1: Bit7~Bit6 => 00, Normal data packet
91 => 01, Absolute coordination packet
92 => 10, Notify packet
93 Bit5 => valid bit
94 Bit4 => 1
95 Bit3 => 1
96 Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
97 Bit1 => Right Button, 1 is pressed, 0 is not pressed.
98 Bit0 => Left Button, 1 is pressed, 0 is not pressed.
99Byte 2: X coordinate (xpos[9:2])
100Byte 3: Y coordinate (ypos[9:2])
101Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
102 Bit3~Bit2 => X coordinate (ypos[1:0])
103 Bit4 => scroll up
104 Bit5 => scroll down
105 Bit6 => scroll left
106 Bit7 => scroll right
107
108Notify Packet for G0
109 Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
110BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
111 1 |1|0|0|1|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |M|M|M|M|M|M|M|M| 4 |0|0|0|0|0|0|0|0|
112 |---------------| |---------------| |---------------| |---------------|
113
114Byte 1: Bit7~Bit6 => 00, Normal data packet
115 => 01, Absolute coordination packet
116 => 10, Notify packet
117 Bit5 => 0
118 Bit4 => 1
119 Bit3 => 1
120 Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
121 Bit1 => Right Button, 1 is pressed, 0 is not pressed.
122 Bit0 => Left Button, 1 is pressed, 0 is not pressed.
123Byte 2: Message Type => 0x5A (Enable/Disable status packet)
124 Mode Type => 0xA5 (Normal/Icon mode status)
125Byte 3: Message Type => 0x00 (Disabled)
126 => 0x01 (Enabled)
127 Mode Type => 0x00 (Normal)
128 => 0x01 (Icon)
129Byte 4: Bit7~Bit0 => Don't Care
130
131==============================================================================
132* Absolute position for STL3888-A0.
133==============================================================================
134Packet 1 (ABSOLUTE POSITION)
135 Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
136BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
137 1 |0|1|V|A|1|L|0|1| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |x|x|y|y|X|X|Y|Y|
138 |---------------| |---------------| |---------------| |---------------|
139
140Byte 1: Bit7~Bit6 => 00, Normal data packet
141 => 01, Absolute coordination packet
142 => 10, Notify packet
143 Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
144 When both fingers are up, the last two reports have zero valid
145 bit.
146 Bit4 => arc
147 Bit3 => 1
148 Bit2 => Left Button, 1 is pressed, 0 is released.
149 Bit1 => 0
150 Bit0 => 1
151Byte 2: X coordinate (xpos[9:2])
152Byte 3: Y coordinate (ypos[9:2])
153Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
154 Bit3~Bit2 => X coordinate (ypos[1:0])
155 Bit5~Bit4 => y1_g
156 Bit7~Bit6 => x1_g
157
158Packet 2 (ABSOLUTE POSITION)
159 Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
160BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
161 1 |0|1|V|A|1|R|1|0| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |x|x|y|y|X|X|Y|Y|
162 |---------------| |---------------| |---------------| |---------------|
163
164Byte 1: Bit7~Bit6 => 00, Normal data packet
165 => 01, Absolute coordinates packet
166 => 10, Notify packet
167 Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
168 When both fingers are up, the last two reports have zero valid
169 bit.
170 Bit4 => arc
171 Bit3 => 1
172 Bit2 => Right Button, 1 is pressed, 0 is released.
173 Bit1 => 1
174 Bit0 => 0
175Byte 2: X coordinate (xpos[9:2])
176Byte 3: Y coordinate (ypos[9:2])
177Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
178 Bit3~Bit2 => X coordinate (ypos[1:0])
179 Bit5~Bit4 => y2_g
180 Bit7~Bit6 => x2_g
181
182Notify Packet for STL3888-A0
183 Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
184BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
185 1 |1|0|1|P|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |0|0|F|F|0|0|0|i| 4 |r|l|d|u|0|0|0|0|
186 |---------------| |---------------| |---------------| |---------------|
187
188Byte 1: Bit7~Bit6 => 00, Normal data packet
189 => 01, Absolute coordination packet
190 => 10, Notify packet
191 Bit5 => 1
192 Bit4 => when in absolute coordinates mode (valid when EN_PKT_GO is 1):
193 0: left button is generated by the on-pad command
194 1: left button is generated by the external button
195 Bit3 => 1
196 Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
197 Bit1 => Right Button, 1 is pressed, 0 is not pressed.
198 Bit0 => Left Button, 1 is pressed, 0 is not pressed.
199Byte 2: Message Type => 0xB7 (Multi Finger, Multi Coordinate mode)
200Byte 3: Bit7~Bit6 => Don't care
201 Bit5~Bit4 => Number of fingers
202 Bit3~Bit1 => Reserved
203 Bit0 => 1: enter gesture mode; 0: leaving gesture mode
204Byte 4: Bit7 => scroll right button
205 Bit6 => scroll left button
206 Bit5 => scroll down button
207 Bit4 => scroll up button
208 * Note that if gesture and additional button (Bit4~Bit7)
209 happen at the same time, the button information will not
210 be sent.
211 Bit3~Bit0 => Reserved
212
213Sample sequence of Multi-finger, Multi-coordinate mode:
214
215 notify packet (valid bit == 1), abs pkt 1, abs pkt 2, abs pkt 1,
216 abs pkt 2, ..., notify packet(valid bit == 0)
217
218==============================================================================
219* FSP Enable/Disable packet
220==============================================================================
221 Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
222BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
223 1 |Y|X|0|0|1|M|R|L| 2 |0|1|0|1|1|0|1|E| 3 | | | | | | | | | 4 | | | | | | | | |
224 |---------------| |---------------| |---------------| |---------------|
225
226FSP will send out enable/disable packet when FSP receive PS/2 enable/disable
227command. Host will receive the packet which Middle, Right, Left button will
228be set. The packet only use byte 0 and byte 1 as a pattern of original packet.
229Ignore the other bytes of the packet.
230
231Byte 1: Bit7 => 0, Y overflow
232 Bit6 => 0, X overflow
233 Bit5 => 0, Y sign bit
234 Bit4 => 0, X sign bit
235 Bit3 => 1
236 Bit2 => 1, Middle Button
237 Bit1 => 1, Right Button
238 Bit0 => 1, Left Button
239Byte 2: Bit7~1 => (0101101b)
240 Bit0 => 1 = Enable
241 0 = Disable
242Byte 3: Don't care
243Byte 4: Don't care (MOUSE ID 3, 4)
244Byte 5~8: Don't care (Absolute packet)
245
246==============================================================================
247* PS/2 Command Set
248==============================================================================
249
250FSP supports basic PS/2 commanding set and modes, refer to following URL for
251details about PS/2 commands:
252
253http://www.computer-engineering.org/index.php?title=PS/2_Mouse_Interface
254
255==============================================================================
256* Programming Sequence for Determining Packet Parsing Flow
257==============================================================================
2581. Identify FSP by reading device ID(0x00) and version(0x01) register
259
2602. Determine number of buttons by reading status2 (0x0b) register
261
262 buttons = reg[0x0b] & 0x30
263
264 if buttons == 0x30 or buttons == 0x20:
265 # two/four buttons
266 Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse'
267 section A for packet parsing detail(ignore byte 4, bit ~ 7)
268 elif buttons == 0x10:
269 # 6 buttons
270 Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse'
271 section B for packet parsing detail
272 elif buttons == 0x00:
273 # 6 buttons
274 Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse'
275 section A for packet parsing detail
276
277==============================================================================
278* Programming Sequence for Register Reading/Writing
279==============================================================================
280
281Register inversion requirement:
282
283 Following values needed to be inverted(the '~' operator in C) before being
284sent to FSP:
285
286 0xe9, 0xee, 0xf2 and 0xff.
287
288Register swapping requirement:
289
290 Following values needed to have their higher 4 bits and lower 4 bits being
291swapped before being sent to FSP:
292
293 10, 20, 40, 60, 80, 100 and 200.
294
295Register reading sequence:
296
297 1. send 0xf3 PS/2 command to FSP;
298
299 2. send 0x66 PS/2 command to FSP;
300
301 3. send 0x88 PS/2 command to FSP;
302
303 4. send 0xf3 PS/2 command to FSP;
304
305 5. if the register address being to read is not required to be
306 inverted(refer to the 'Register inversion requirement' section),
307 goto step 6
308
309 5a. send 0x68 PS/2 command to FSP;
310
311 5b. send the inverted register address to FSP and goto step 8;
312
313 6. if the register address being to read is not required to be
314 swapped(refer to the 'Register swapping requirement' section),
315 goto step 7
316
317 6a. send 0xcc PS/2 command to FSP;
318
319 6b. send the swapped register address to FSP and goto step 8;
320
321 7. send 0x66 PS/2 command to FSP;
322
323 7a. send the original register address to FSP and goto step 8;
324
325 8. send 0xe9(status request) PS/2 command to FSP;
326
327 9. the response read from FSP should be the requested register value.
328
329Register writing sequence:
330
331 1. send 0xf3 PS/2 command to FSP;
332
333 2. if the register address being to write is not required to be
334 inverted(refer to the 'Register inversion requirement' section),
335 goto step 3
336
337 2a. send 0x74 PS/2 command to FSP;
338
339 2b. send the inverted register address to FSP and goto step 5;
340
341 3. if the register address being to write is not required to be
342 swapped(refer to the 'Register swapping requirement' section),
343 goto step 4
344
345 3a. send 0x77 PS/2 command to FSP;
346
347 3b. send the swapped register address to FSP and goto step 5;
348
349 4. send 0x55 PS/2 command to FSP;
350
351 4a. send the register address to FSP and goto step 5;
352
353 5. send 0xf3 PS/2 command to FSP;
354
355 6. if the register value being to write is not required to be
356 inverted(refer to the 'Register inversion requirement' section),
357 goto step 7
358
359 6a. send 0x47 PS/2 command to FSP;
360
361 6b. send the inverted register value to FSP and goto step 9;
362
363 7. if the register value being to write is not required to be
364 swapped(refer to the 'Register swapping requirement' section),
365 goto step 8
366
367 7a. send 0x44 PS/2 command to FSP;
368
369 7b. send the swapped register value to FSP and goto step 9;
370
371 8. send 0x33 PS/2 command to FSP;
372
373 8a. send the register value to FSP;
374
375 9. the register writing sequence is completed.
376
377==============================================================================
378* Register Listing
379==============================================================================
380
381offset width default r/w name
3820x00 bit7~bit0 0x01 RO device ID
383
3840x01 bit7~bit0 0xc0 RW version ID
385
3860x02 bit7~bit0 0x01 RO vendor ID
387
3880x03 bit7~bit0 0x01 RO product ID
389
3900x04 bit3~bit0 0x01 RW revision ID
391
3920x0b RO test mode status 1
393 bit3 1 RO 0: rotate 180 degree, 1: no rotation
394
395 bit5~bit4 RO number of buttons
396 11 => 2, lbtn/rbtn
397 10 => 4, lbtn/rbtn/scru/scrd
398 01 => 6, lbtn/rbtn/scru/scrd/scrl/scrr
399 00 => 6, lbtn/rbtn/scru/scrd/fbtn/bbtn
400
4010x0f RW register file page control
402 bit0 0 RW 1 to enable page 1 register files
403
4040x10 RW system control 1
405 bit0 1 RW Reserved, must be 1
406 bit1 0 RW Reserved, must be 0
407 bit4 1 RW Reserved, must be 0
408 bit5 0 RW register clock gating enable
409 0: read only, 1: read/write enable
410 (Note that following registers does not require clock gating being
411 enabled prior to write: 05 06 07 08 09 0c 0f 10 11 12 16 17 18 23 2e
412 40 41 42 43.)
413
4140x31 RW on-pad command detection
415 bit7 0 RW on-pad command left button down tag
416 enable
417 0: disable, 1: enable
418
4190x34 RW on-pad command control 5
420 bit4~bit0 0x05 RW XLO in 0s/4/1, so 03h = 0010.1b = 2.5
421 (Note that position unit is in 0.5 scanline)
422
423 bit7 0 RW on-pad tap zone enable
424 0: disable, 1: enable
425
4260x35 RW on-pad command control 6
427 bit4~bit0 0x1d RW XHI in 0s/4/1, so 19h = 1100.1b = 12.5
428 (Note that position unit is in 0.5 scanline)
429
4300x36 RW on-pad command control 7
431 bit4~bit0 0x04 RW YLO in 0s/4/1, so 03h = 0010.1b = 2.5
432 (Note that position unit is in 0.5 scanline)
433
4340x37 RW on-pad command control 8
435 bit4~bit0 0x13 RW YHI in 0s/4/1, so 11h = 1000.1b = 8.5
436 (Note that position unit is in 0.5 scanline)
437
4380x40 RW system control 5
439 bit1 0 RW FSP Intellimouse mode enable
440 0: disable, 1: enable
441
442 bit2 0 RW movement + abs. coordinate mode enable
443 0: disable, 1: enable
444 (Note that this function has the functionality of bit 1 even when
445 bit 1 is not set. However, the format is different from that of bit 1.
446 In addition, when bit 1 and bit 2 are set at the same time, bit 2 will
447 override bit 1.)
448
449 bit3 0 RW abs. coordinate only mode enable
450 0: disable, 1: enable
451 (Note that this function has the functionality of bit 1 even when
452 bit 1 is not set. However, the format is different from that of bit 1.
453 In addition, when bit 1, bit 2 and bit 3 are set at the same time,
454 bit 3 will override bit 1 and 2.)
455
456 bit5 0 RW auto switch enable
457 0: disable, 1: enable
458
459 bit6 0 RW G0 abs. + notify packet format enable
460 0: disable, 1: enable
461 (Note that the absolute/relative coordinate output still depends on
462 bit 2 and 3. That is, if any of those bit is 1, host will receive
463 absolute coordinates; otherwise, host only receives packets with
464 relative coordinate.)
465
4660x43 RW on-pad control
467 bit0 0 RW on-pad control enable
468 0: disable, 1: enable
469 (Note that if this bit is cleared, bit 3/5 will be ineffective)
470
471 bit3 0 RW on-pad fix vertical scrolling enable
472 0: disable, 1: enable
473
474 bit5 0 RW on-pad fix horizontal scrolling enable
475 0: disable, 1: enable