7 files changed, 41 insertions, 14 deletions

diff --git a/Documentation/i2c/busses/i2c-diolan-u2c b/Documentation/i2c/busses/i2c-diolan-u2c
new file mode 100644
index 000000000000..30fe4bb9a069
--- /dev/null
+++ b/Documentation/i2c/busses/i2c-diolan-u2c
@@ -0,0 +1,26 @@
+Kernel driver i2c-diolan-u2c
+
+Supported adapters:
+  * Diolan U2C-12 I2C-USB adapter
+    Documentation:
+        http://www.diolan.com/i2c/u2c12.html
+
+Author: Guenter Roeck <guenter.roeck@ericsson.com>
+
+Description
+-----------
+
+This is the driver for the Diolan U2C-12 USB-I2C adapter.
+
+The Diolan U2C-12 I2C-USB Adapter provides a low cost solution to connect
+a computer to I2C slave devices using a USB interface. It also supports
+connectivity to SPI devices.
+
+This driver only supports the I2C interface of U2C-12. The driver does not use
+interrupts.
+
+
+Module parameters
+-----------------
+
+* frequency: I2C bus frequency
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index 93fe76e56522..6df69765ccb7 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -16,8 +16,9 @@ Supported adapters:
   * Intel EP80579 (Tolapai)
   * Intel 82801JI (ICH10)
   * Intel 5/3400 Series (PCH)
-  * Intel Cougar Point (PCH)
+  * Intel 6 Series (PCH)
   * Intel Patsburg (PCH)
+  * Intel DH89xxCC (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller
diff --git a/Documentation/i2c/busses/i2c-parport-light b/Documentation/i2c/busses/i2c-parport-light
index bdc9cbb2e0f2..c22ee063e1e5 100644
--- a/Documentation/i2c/busses/i2c-parport-light
+++ b/Documentation/i2c/busses/i2c-parport-light
@@ -4,7 +4,7 @@ Author: Jean Delvare <khali@linux-fr.org>
 
 This driver is a light version of i2c-parport. It doesn't depend        
 on the parport driver, and uses direct I/O access instead. This might be
-prefered on embedded systems where wasting memory for the clean but heavy
+preferred on embedded systems where wasting memory for the clean but heavy
 parport handling is not an option. The drawback is a reduced portability
 and the impossibility to daisy-chain other parallel port devices.                 
   
diff --git a/Documentation/i2c/busses/i2c-sis96x b/Documentation/i2c/busses/i2c-sis96x
index 70e6a0cc1e15..0b979f3252a4 100644
--- a/Documentation/i2c/busses/i2c-sis96x
+++ b/Documentation/i2c/busses/i2c-sis96x
@@ -35,7 +35,7 @@ or perhaps this...
 
 (kernel versions later than 2.4.18 may fill in the "Unknown"s)
 
-If you cant see it please look on quirk_sis_96x_smbus
+If you can't see it please look on quirk_sis_96x_smbus
 (drivers/pci/quirks.c) (also if southbridge detection fails)
 
 I suspect that this driver could be made to work for the following SiS
diff --git a/Documentation/i2c/busses/i2c-taos-evm b/Documentation/i2c/busses/i2c-taos-evm
index 9146e33be6dd..63f62bcbf592 100644
--- a/Documentation/i2c/busses/i2c-taos-evm
+++ b/Documentation/i2c/busses/i2c-taos-evm
@@ -13,7 +13,7 @@ Currently supported devices are:
 
 * TAOS TSL2550 EVM
 
-For addtional information on TAOS products, please see
+For additional information on TAOS products, please see
   http://www.taosinc.com/
 
 
diff --git a/Documentation/i2c/instantiating-devices b/Documentation/i2c/instantiating-devices
index 87da405a8597..9edb75d8c9b9 100644
--- a/Documentation/i2c/instantiating-devices
+++ b/Documentation/i2c/instantiating-devices
@@ -100,7 +100,7 @@ static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev)
         (...)
         i2c_adap = i2c_get_adapter(2);
         memset(&i2c_info, 0, sizeof(struct i2c_board_info));
-        strlcpy(i2c_info.name, "isp1301_pnx", I2C_NAME_SIZE);
+        strlcpy(i2c_info.type, "isp1301_pnx", I2C_NAME_SIZE);
         isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info,
                                                    normal_i2c, NULL);
         i2c_put_adapter(i2c_adap);
diff --git a/Documentation/i2c/upgrading-clients b/Documentation/i2c/upgrading-clients
index 9a45f9bb6a25..d6991625c407 100644
--- a/Documentation/i2c/upgrading-clients
+++ b/Documentation/i2c/upgrading-clients
@@ -61,7 +61,7 @@ static int example_attach(struct i2c_adapter *adap, int addr, int kind)
         return 0;
 }
 
-static int __devexit example_detach(struct i2c_client *client)
+static int example_detach(struct i2c_client *client)
 {
         struct example_state *state = i2c_get_clientdata(client);
 
@@ -81,7 +81,7 @@ static struct i2c_driver example_driver = {
                 .name           = "example",
         },
         .attach_adapter = example_attach_adapter,
-        .detach_client  = __devexit_p(example_detach),
+        .detach_client  = example_detach,
         .suspend        = example_suspend,
         .resume         = example_resume,
 };
@@ -93,7 +93,7 @@ Updating the client
 The new style binding model will check against a list of supported
 devices and their associated address supplied by the code registering
 the busses. This means that the driver .attach_adapter and
-.detach_adapter methods can be removed, along with the addr_data,
+.detach_client methods can be removed, along with the addr_data,
 as follows:
 
 - static struct i2c_driver example_driver;
@@ -110,14 +110,14 @@ as follows:
 
  static struct i2c_driver example_driver = {
 -       .attach_adapter = example_attach_adapter,
--       .detach_client  = __devexit_p(example_detach),
+-       .detach_client  = example_detach,
  }
 
 Add the probe and remove methods to the i2c_driver, as so:
 
  static struct i2c_driver example_driver = {
 +       .probe          = example_probe,
-+       .remove         = __devexit_p(example_remove),
++       .remove         = example_remove,
  }
 
 Change the example_attach method to accept the new parameters
@@ -199,8 +199,8 @@ to delete the i2c_detach_client call. It is possible that you
 can also remove the ret variable as it is not not needed for
 any of the core functions.
 
-- static int __devexit example_detach(struct i2c_client *client)
-+ static int __devexit example_remove(struct i2c_client *client)
+- static int example_detach(struct i2c_client *client)
++ static int example_remove(struct i2c_client *client)
 {
         struct example_state *state = i2c_get_clientdata(client);
 
@@ -253,7 +253,7 @@ static int example_probe(struct i2c_client *client,
         return 0;
 }
 
-static int __devexit example_remove(struct i2c_client *client)
+static int example_remove(struct i2c_client *client)
 {
         struct example_state *state = i2c_get_clientdata(client);
 
@@ -275,7 +275,7 @@ static struct i2c_driver example_driver = {
         },
         .id_table       = example_idtable,
         .probe          = example_probe,
-        .remove         = __devexit_p(example_remove),
+        .remove         = example_remove,
         .suspend        = example_suspend,
         .resume         = example_resume,
 };