87 files changed, 2631 insertions, 4621 deletions

diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.txt
new file mode 100644
index 000000000000..2c28f1d12f45
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.txt
@@ -0,0 +1,11 @@
+Altera SOCFPGA Clock Manager
+
+Required properties:
+- compatible : "altr,clk-mgr"
+- reg : Should contain base address and length for Clock Manager
+
+Example:
+         clkmgr@ffd04000 {
+                compatible = "altr,clk-mgr";
+                reg = <0xffd04000 0x1000>;
+        };
diff --git a/Documentation/devicetree/bindings/arm/atmel-adc.txt b/Documentation/devicetree/bindings/arm/atmel-adc.txt
index c63097d6afeb..16769d9cedd6 100644
--- a/Documentation/devicetree/bindings/arm/atmel-adc.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-adc.txt
@@ -14,9 +14,19 @@ Required properties:
   - atmel,adc-status-register: Offset of the Interrupt Status Register
   - atmel,adc-trigger-register: Offset of the Trigger Register
   - atmel,adc-vref: Reference voltage in millivolts for the conversions
+  - atmel,adc-res: List of resolution in bits supported by the ADC. List size
+                   must be two at least.
+  - atmel,adc-res-names: Contains one identifier string for each resolution
+                         in atmel,adc-res property. "lowres" and "highres"
+                         identifiers are required.
 
 Optional properties:
   - atmel,adc-use-external: Boolean to enable of external triggers
+  - atmel,adc-use-res: String corresponding to an identifier from
+                       atmel,adc-res-names property. If not specified, the highest
+                       resolution will be used.
+  - atmel,adc-sleep-mode: Boolean to enable sleep mode when no conversion
+  - atmel,adc-sample-hold-time: Sample and Hold Time in microseconds
  
 Optional trigger Nodes:
   - Required properties:
@@ -40,6 +50,9 @@ adc0: adc@fffb0000 {
         atmel,adc-trigger-register = <0x08>;
         atmel,adc-use-external;
         atmel,adc-vref = <3300>;
+        atmel,adc-res = <8 10>;
+        atmel,adc-res-names = "lowres", "highres";
+        atmel,adc-use-res = "lowres";
 
         trigger@0 {
                 trigger-name = "external-rising";
diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm,kona-timer.txt b/Documentation/devicetree/bindings/arm/bcm/bcm,kona-timer.txt
new file mode 100644
index 000000000000..59fa6e68d4f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/bcm,kona-timer.txt
@@ -0,0 +1,19 @@
+Broadcom Kona Family timer
+-----------------------------------------------------
+This timer is used in the following Broadcom SoCs:
+ BCM11130, BCM11140, BCM11351, BCM28145, BCM28155
+
+Required properties:
+- compatible : "bcm,kona-timer"
+- reg : Register range for the timer
+- interrupts : interrupt for the timer
+- clock-frequency: frequency that the clock operates
+
+Example:
+        timer@35006000 {
+                compatible = "bcm,kona-timer";
+                reg = <0x35006000 0x1000>;
+                interrupts = <0x0 7 0x4>;
+                clock-frequency = <32768>;
+        };
+
diff --git a/Documentation/devicetree/bindings/arm/msm/ssbi.txt b/Documentation/devicetree/bindings/arm/msm/ssbi.txt
new file mode 100644
index 000000000000..54fd5ced3401
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/msm/ssbi.txt
@@ -0,0 +1,18 @@
+* Qualcomm SSBI
+
+Some Qualcomm MSM devices contain a point-to-point serial bus used to
+communicate with a limited range of devices (mostly power management
+chips).
+
+These require the following properties:
+
+- compatible: "qcom,ssbi"
+
+- qcom,controller-type
+  indicates the SSBI bus variant the controller should use to talk
+  with the slave device.  This should be one of "ssbi", "ssbi2", or
+  "pmic-arbiter".  The type chosen is determined by the attached
+  slave.
+
+The slave device should be the single child node of the ssbi device
+with a compatible field.
diff --git a/Documentation/devicetree/bindings/arm/msm/timer.txt b/Documentation/devicetree/bindings/arm/msm/timer.txt
index 8c5907b9cae8..c6ef8f13dc7e 100644
--- a/Documentation/devicetree/bindings/arm/msm/timer.txt
+++ b/Documentation/devicetree/bindings/arm/msm/timer.txt
@@ -3,36 +3,35 @@
 Properties:
 
 - compatible : Should at least contain "qcom,msm-timer". More specific
-  properties such as "qcom,msm-gpt" and "qcom,msm-dgt" specify a general
-  purpose timer and a debug timer respectively.
+               properties specify which subsystem the timers are paired with.
 
-- interrupts : Interrupt indicating a match event.
+               "qcom,kpss-timer" - krait subsystem
+               "qcom,scss-timer" - scorpion subsystem
 
-- reg : Specifies the base address of the timer registers. The second region
-  specifies an optional register used to configure the clock divider.
+- interrupts : Interrupts for the the debug timer, the first general purpose
+               timer, and optionally a second general purpose timer in that
+               order.
 
-- clock-frequency : The frequency of the timer in Hz.
+- reg : Specifies the base address of the timer registers.
+
+- clock-frequency : The frequency of the debug timer and the general purpose
+                    timer(s) in Hz in that order.
 
 Optional:
 
 - cpu-offset : per-cpu offset used when the timer is accessed without the
-  CPU remapping facilities. The offset is cpu-offset * cpu-nr.
+               CPU remapping facilities. The offset is
+               cpu-offset + (0x10000 * cpu-nr).
 
 Example:
 
-       timer@200a004 {
-               compatible = "qcom,msm-gpt", "qcom,msm-timer";
-               interrupts = <1 2 0x301>;
-               reg = <0x0200a004 0x10>;
-               clock-frequency = <32768>;
-               cpu-offset = <0x40000>;
-       };
-
-       timer@200a024 {
-               compatible = "qcom,msm-dgt", "qcom,msm-timer";
-               interrupts = <1 3 0x301>;
-               reg = <0x0200a024 0x10>,
-                     <0x0200a034 0x4>;
-               clock-frequency = <6750000>;
+       timer@200a000 {
+               compatible = "qcom,scss-timer", "qcom,msm-timer";
+               interrupts = <1 1 0x301>,
+                            <1 2 0x301>,
+                            <1 3 0x301>;
+               reg = <0x0200a000 0x100>;
+               clock-frequency = <19200000>,
+                                 <32768>;
                cpu-offset = <0x40000>;
        };
diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
new file mode 100644
index 000000000000..47ada1dff216
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
@@ -0,0 +1,60 @@
+Samsung Exynos Analog to Digital Converter bindings
+
+The devicetree bindings are for the new ADC driver written for
+Exynos4 and upward SoCs from Samsung.
+
+New driver handles the following
+1. Supports ADC IF found on EXYNOS4412/EXYNOS5250
+   and future SoCs from Samsung
+2. Add ADC driver under iio/adc framework
+3. Also adds the Documentation for device tree bindings
+
+Required properties:
+- compatible:           Must be "samsung,exynos-adc-v1"
+                                for exynos4412/5250 controllers.
+                        Must be "samsung,exynos-adc-v2" for
+                                future controllers.
+- reg:                  Contains ADC register address range (base address and
+                        length) and the address of the phy enable register.
+- interrupts:           Contains the interrupt information for the timer. The
+                        format is being dependent on which interrupt controller
+                        the Samsung device uses.
+- #io-channel-cells = <1>; As ADC has multiple outputs
+- clocks                From common clock binding: handle to adc clock.
+- clock-names           From common clock binding: Shall be "adc".
+- vdd-supply            VDD input supply.
+
+Note: child nodes can be added for auto probing from device tree.
+
+Example: adding device info in dtsi file
+
+adc: adc@12D10000 {
+        compatible = "samsung,exynos-adc-v1";
+        reg = <0x12D10000 0x100>, <0x10040718 0x4>;
+        interrupts = <0 106 0>;
+        #io-channel-cells = <1>;
+        io-channel-ranges;
+
+        clocks = <&clock 303>;
+        clock-names = "adc";
+
+        vdd-supply = <&buck5_reg>;
+};
+
+
+Example: Adding child nodes in dts file
+
+adc@12D10000 {
+
+        /* NTC thermistor is a hwmon device */
+        ncp15wb473@0 {
+                compatible = "ntc,ncp15wb473";
+                pullup-uV = <1800000>;
+                pullup-ohm = <47000>;
+                pulldown-ohm = <0>;
+                io-channels = <&adc 4>;
+        };
+};
+
+Note: Does not apply to ADC driver under arch/arm/plat-samsung/
+Note: The child node can be added under the adc node or separately.
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
index b5846e21cc2e..1608a54e90e1 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
@@ -1,19 +1,84 @@
 NVIDIA Tegra Power Management Controller (PMC)
 
-Properties:
+The PMC block interacts with an external Power Management Unit. The PMC
+mostly controls the entry and exit of the system from different sleep
+modes. It provides power-gating controllers for SoC and CPU power-islands.
+
+Required properties:
 - name : Should be pmc
 - compatible : Should contain "nvidia,tegra<chip>-pmc".
 - reg : Offset and length of the register set for the device
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names : Must include the following entries:
+  "pclk" (The Tegra clock of that name),
+  "clk32k_in" (The 32KHz clock input to Tegra).
+
+Optional properties:
 - nvidia,invert-interrupt : If present, inverts the PMU interrupt signal.
   The PMU is an external Power Management Unit, whose interrupt output
   signal is fed into the PMC. This signal is optionally inverted, and then
   fed into the ARM GIC. The PMC is not involved in the detection or
   handling of this interrupt signal, merely its inversion.
+- nvidia,suspend-mode : The suspend mode that the platform should use.
+  Valid values are 0, 1 and 2:
+  0 (LP0): CPU + Core voltage off and DRAM in self-refresh
+  1 (LP1): CPU voltage off and DRAM in self-refresh
+  2 (LP2): CPU voltage off
+- nvidia,core-power-req-active-high : Boolean, core power request active-high
+- nvidia,sys-clock-req-active-high : Boolean, system clock request active-high
+- nvidia,combined-power-req : Boolean, combined power request for CPU & Core
+- nvidia,cpu-pwr-good-en : Boolean, CPU power good signal (from PMIC to PMC)
+                           is enabled.
+
+Required properties when nvidia,suspend-mode is specified:
+- nvidia,cpu-pwr-good-time : CPU power good time in uS.
+- nvidia,cpu-pwr-off-time : CPU power off time in uS.
+- nvidia,core-pwr-good-time : <Oscillator-stable-time Power-stable-time>
+                              Core power good time in uS.
+- nvidia,core-pwr-off-time : Core power off time in uS.
+
+Required properties when nvidia,suspend-mode=<0>:
+- nvidia,lp0-vec : <start length> Starting address and length of LP0 vector
+  The LP0 vector contains the warm boot code that is executed by AVP when
+  resuming from the LP0 state. The AVP (Audio-Video Processor) is an ARM7
+  processor and always being the first boot processor when chip is power on
+  or resume from deep sleep mode. When the system is resumed from the deep
+  sleep mode, the warm boot code will restore some PLLs, clocks and then
+  bring up CPU0 for resuming the system.
 
 Example:
 
+/ SoC dts including file
 pmc@7000f400 {
         compatible = "nvidia,tegra20-pmc";
         reg = <0x7000e400 0x400>;
+        clocks = <&tegra_car 110>, <&clk32k_in>;
+        clock-names = "pclk", "clk32k_in";
         nvidia,invert-interrupt;
+        nvidia,suspend-mode = <1>;
+        nvidia,cpu-pwr-good-time = <2000>;
+        nvidia,cpu-pwr-off-time = <100>;
+        nvidia,core-pwr-good-time = <3845 3845>;
+        nvidia,core-pwr-off-time = <458>;
+        nvidia,core-power-req-active-high;
+        nvidia,sys-clock-req-active-high;
+        nvidia,lp0-vec = <0xbdffd000 0x2000>;
+};
+
+/ Tegra board dts file
+{
+        ...
+        clocks {
+                compatible = "simple-bus";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                clk32k_in: clock {
+                        compatible = "fixed-clock";
+                        reg=<0>;
+                        #clock-cells = <0>;
+                        clock-frequency = <32768>;
+                };
+        };
+        ...
 };
diff --git a/Documentation/devicetree/bindings/ata/imx-pata.txt b/Documentation/devicetree/bindings/ata/imx-pata.txt
new file mode 100644
index 000000000000..e38d73414b0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/imx-pata.txt
@@ -0,0 +1,17 @@
+* Freescale i.MX PATA Controller
+
+Required properties:
+- compatible: "fsl,imx27-pata"
+- reg: Address range of the PATA Controller
+- interrupts: The interrupt of the PATA Controller
+- clocks: the clocks for the PATA Controller
+
+Example:
+
+        pata: pata@83fe0000 {
+                compatible = "fsl,imx51-pata", "fsl,imx27-pata";
+                reg = <0x83fe0000 0x4000>;
+                interrupts = <70>;
+                clocks = <&clks 161>;
+                status = "disabled";
+        };
diff --git a/Documentation/devicetree/bindings/clock/altr_socfpga.txt b/Documentation/devicetree/bindings/clock/altr_socfpga.txt
new file mode 100644
index 000000000000..bd0c8416a5c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/altr_socfpga.txt
@@ -0,0 +1,18 @@
+Device Tree Clock bindings for Altera's SoCFPGA platform
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+        "altr,socfpga-pll-clock" - for a PLL clock
+        "altr,socfpga-perip-clock" - The peripheral clock divided from the
+                PLL clock.
+- reg : shall be the control register offset from CLOCK_MANAGER's base for the clock.
+- clocks : shall be the input parent clock phandle for the clock. This is
+        either an oscillator or a pll output.
+- #clock-cells : from common clock binding, shall be set to 0.
+
+Optional properties:
+- fixed-divider : If clocks have a fixed divider value, use this property.
diff --git a/Documentation/devicetree/bindings/clock/axi-clkgen.txt b/Documentation/devicetree/bindings/clock/axi-clkgen.txt
new file mode 100644
index 000000000000..028b493e97ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/axi-clkgen.txt
@@ -0,0 +1,22 @@
+Binding for the axi-clkgen clock generator
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "adi,axi-clkgen".
+- #clock-cells : from common clock binding; Should always be set to 0.
+- reg : Address and length of the axi-clkgen register set.
+- clocks : Phandle and clock specifier for the parent clock.
+
+Optional properties:
+- clock-output-names : From common clock binding.
+
+Example:
+        clock@0xff000000 {
+                compatible = "adi,axi-clkgen";
+                #clock-cells = <0>;
+                reg = <0xff000000 0x1000>;
+                clocks = <&osc 1>;
+        };
diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/fixed-factor-clock.txt
new file mode 100644
index 000000000000..5757f9abfc26
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fixed-factor-clock.txt
@@ -0,0 +1,24 @@
+Binding for simple fixed factor rate clock sources.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "fixed-factor-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clock-div: fixed divider.
+- clock-mult: fixed multiplier.
+- clocks: parent clock.
+
+Optional properties:
+- clock-output-names : From common clock binding.
+
+Example:
+        clock {
+                compatible = "fixed-factor-clock";
+                clocks = <&parentclk>;
+                #clock-cells = <0>;
+                div = <2>;
+                mult = <1>;
+        };
diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.txt b/Documentation/devicetree/bindings/clock/imx27-clock.txt
new file mode 100644
index 000000000000..ab1a56e9de9d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx27-clock.txt
@@ -0,0 +1,117 @@
+* Clock bindings for Freescale i.MX27
+
+Required properties:
+- compatible: Should be "fsl,imx27-ccm"
+- reg: Address and length of the register set
+- interrupts: Should contain CCM interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  The following is a full list of i.MX27
+clocks and IDs.
+
+        Clock               ID
+        -----------------------
+        dummy                0
+        ckih                 1
+        ckil                 2
+        mpll                 3
+        spll                 4
+        mpll_main2           5
+        ahb                  6
+        ipg                  7
+        nfc_div              8
+        per1_div             9
+        per2_div             10
+        per3_div             11
+        per4_div             12
+        vpu_sel              13
+        vpu_div              14
+        usb_div              15
+        cpu_sel              16
+        clko_sel             17
+        cpu_div              18
+        clko_div             19
+        ssi1_sel             20
+        ssi2_sel             21
+        ssi1_div             22
+        ssi2_div             23
+        clko_en              24
+        ssi2_ipg_gate        25
+        ssi1_ipg_gate        26
+        slcdc_ipg_gate       27
+        sdhc3_ipg_gate       28
+        sdhc2_ipg_gate       29
+        sdhc1_ipg_gate       30
+        scc_ipg_gate         31
+        sahara_ipg_gate      32
+        rtc_ipg_gate         33
+        pwm_ipg_gate         34
+        owire_ipg_gate       35
+        lcdc_ipg_gate        36
+        kpp_ipg_gate         37
+        iim_ipg_gate         38
+        i2c2_ipg_gate        39
+        i2c1_ipg_gate        40
+        gpt6_ipg_gate        41
+        gpt5_ipg_gate        42
+        gpt4_ipg_gate        43
+        gpt3_ipg_gate        44
+        gpt2_ipg_gate        45
+        gpt1_ipg_gate        46
+        gpio_ipg_gate        47
+        fec_ipg_gate         48
+        emma_ipg_gate        49
+        dma_ipg_gate         50
+        cspi3_ipg_gate       51
+        cspi2_ipg_gate       52
+        cspi1_ipg_gate       53
+        nfc_baud_gate        54
+        ssi2_baud_gate       55
+        ssi1_baud_gate       56
+        vpu_baud_gate        57
+        per4_gate            58
+        per3_gate            59
+        per2_gate            60
+        per1_gate            61
+        usb_ahb_gate         62
+        slcdc_ahb_gate       63
+        sahara_ahb_gate      64
+        lcdc_ahb_gate        65
+        vpu_ahb_gate         66
+        fec_ahb_gate         67
+        emma_ahb_gate        68
+        emi_ahb_gate         69
+        dma_ahb_gate         70
+        csi_ahb_gate         71
+        brom_ahb_gate        72
+        ata_ahb_gate         73
+        wdog_ipg_gate        74
+        usb_ipg_gate         75
+        uart6_ipg_gate       76
+        uart5_ipg_gate       77
+        uart4_ipg_gate       78
+        uart3_ipg_gate       79
+        uart2_ipg_gate       80
+        uart1_ipg_gate       81
+        ckih_div1p5          82
+        fpm                  83
+        mpll_osc_sel         84
+        mpll_sel             85
+
+Examples:
+
+clks: ccm@10027000{
+        compatible = "fsl,imx27-ccm";
+        reg = <0x10027000 0x1000>;
+        #clock-cells = <1>;
+};
+
+uart1: serial@1000a000 {
+        compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+        reg = <0x1000a000 0x1000>;
+        interrupts = <20>;
+        clocks = <&clks 81>, <&clks 61>;
+        clock-names = "ipg", "per";
+        status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.txt b/Documentation/devicetree/bindings/clock/silabs,si5351.txt
new file mode 100644
index 000000000000..cc374651662c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/silabs,si5351.txt
@@ -0,0 +1,114 @@
+Binding for Silicon Labs Si5351a/b/c programmable i2c clock generator.
+
+Reference
+[1] Si5351A/B/C Data Sheet
+    http://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf
+
+The Si5351a/b/c are programmable i2c clock generators with upto 8 output
+clocks. Si5351a also has a reduced pin-count package (MSOP10) where only
+3 output clocks are accessible. The internal structure of the clock
+generators can be found in [1].
+
+==I2C device node==
+
+Required properties:
+- compatible: shall be one of "silabs,si5351{a,a-msop,b,c}".
+- reg: i2c device address, shall be 0x60 or 0x61.
+- #clock-cells: from common clock binding; shall be set to 1.
+- clocks: from common clock binding; list of parent clock
+  handles, shall be xtal reference clock or xtal and clkin for
+  si5351c only.
+- #address-cells: shall be set to 1.
+- #size-cells: shall be set to 0.
+
+Optional properties:
+- silabs,pll-source: pair of (number, source) for each pll. Allows
+  to overwrite clock source of pll A (number=0) or B (number=1).
+
+==Child nodes==
+
+Each of the clock outputs can be overwritten individually by
+using a child node to the I2C device node. If a child node for a clock
+output is not set, the eeprom configuration is not overwritten.
+
+Required child node properties:
+- reg: number of clock output.
+
+Optional child node properties:
+- silabs,clock-source: source clock of the output divider stage N, shall be
+  0 = multisynth N
+  1 = multisynth 0 for output clocks 0-3, else multisynth4
+  2 = xtal
+  3 = clkin (si5351c only)
+- silabs,drive-strength: output drive strength in mA, shall be one of {2,4,6,8}.
+- silabs,multisynth-source: source pll A(0) or B(1) of corresponding multisynth
+  divider.
+- silabs,pll-master: boolean, multisynth can change pll frequency.
+
+==Example==
+
+/* 25MHz reference crystal */
+ref25: ref25M {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <25000000>;
+};
+
+i2c-master-node {
+
+        /* Si5351a msop10 i2c clock generator */
+        si5351a: clock-generator@60 {
+                compatible = "silabs,si5351a-msop";
+                reg = <0x60>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+                #clock-cells = <1>;
+
+                /* connect xtal input to 25MHz reference */
+                clocks = <&ref25>;
+
+                /* connect xtal input as source of pll0 and pll1 */
+                silabs,pll-source = <0 0>, <1 0>;
+
+                /*
+                 * overwrite clkout0 configuration with:
+                 * - 8mA output drive strength
+                 * - pll0 as clock source of multisynth0
+                 * - multisynth0 as clock source of output divider
+                 * - multisynth0 can change pll0
+                 * - set initial clock frequency of 74.25MHz
+                 */
+                clkout0 {
+                        reg = <0>;
+                        silabs,drive-strength = <8>;
+                        silabs,multisynth-source = <0>;
+                        silabs,clock-source = <0>;
+                        silabs,pll-master;
+                        clock-frequency = <74250000>;
+                };
+
+                /*
+                 * overwrite clkout1 configuration with:
+                 * - 4mA output drive strength
+                 * - pll1 as clock source of multisynth1
+                 * - multisynth1 as clock source of output divider
+                 * - multisynth1 can change pll1
+                 */
+                clkout1 {
+                        reg = <1>;
+                        silabs,drive-strength = <4>;
+                        silabs,multisynth-source = <1>;
+                        silabs,clock-source = <0>;
+                        pll-master;
+                };
+
+                /*
+                 * overwrite clkout2 configuration with:
+                 * - xtal as clock source of output divider
+                 */
+                clkout2 {
+                        reg = <2>;
+                        silabs,clock-source = <2>;
+                };
+        };
+};
diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
new file mode 100644
index 000000000000..729f52426fe1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -0,0 +1,151 @@
+Device Tree Clock bindings for arch-sunxi
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+        "allwinner,sun4i-osc-clk" - for a gatable oscillator
+        "allwinner,sun4i-pll1-clk" - for the main PLL clock
+        "allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock
+        "allwinner,sun4i-axi-clk" - for the AXI clock
+        "allwinner,sun4i-axi-gates-clk" - for the AXI gates
+        "allwinner,sun4i-ahb-clk" - for the AHB clock
+        "allwinner,sun4i-ahb-gates-clk" - for the AHB gates
+        "allwinner,sun4i-apb0-clk" - for the APB0 clock
+        "allwinner,sun4i-apb0-gates-clk" - for the APB0 gates
+        "allwinner,sun4i-apb1-clk" - for the APB1 clock
+        "allwinner,sun4i-apb1-mux-clk" - for the APB1 clock muxing
+        "allwinner,sun4i-apb1-gates-clk" - for the APB1 gates
+
+Required properties for all clocks:
+- reg : shall be the control register address for the clock.
+- clocks : shall be the input parent clock(s) phandle for the clock
+- #clock-cells : from common clock binding; shall be set to 0 except for
+        "allwinner,sun4i-*-gates-clk" where it shall be set to 1
+
+Additionally, "allwinner,sun4i-*-gates-clk" clocks require:
+- clock-output-names : the corresponding gate names that the clock controls
+
+For example:
+
+osc24M: osc24M@01c20050 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-osc-clk";
+        reg = <0x01c20050 0x4>;
+        clocks = <&osc24M_fixed>;
+};
+
+pll1: pll1@01c20000 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-pll1-clk";
+        reg = <0x01c20000 0x4>;
+        clocks = <&osc24M>;
+};
+
+cpu: cpu@01c20054 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-cpu-clk";
+        reg = <0x01c20054 0x4>;
+        clocks = <&osc32k>, <&osc24M>, <&pll1>;
+};
+
+
+
+Gate clock outputs
+
+The "allwinner,sun4i-*-gates-clk" clocks provide several gatable outputs;
+their corresponding offsets as present on sun4i are listed below. Note that
+some of these gates are not present on sun5i.
+
+  * AXI gates ("allwinner,sun4i-axi-gates-clk")
+
+    DRAM                                                                0
+
+  * AHB gates ("allwinner,sun4i-ahb-gates-clk")
+
+    USB0                                                                0
+    EHCI0                                                               1
+    OHCI0                                                               2*
+    EHCI1                                                               3
+    OHCI1                                                               4*
+    SS                                                                  5
+    DMA                                                                 6
+    BIST                                                                7
+    MMC0                                                                8
+    MMC1                                                                9
+    MMC2                                                                10
+    MMC3                                                                11
+    MS                                                                  12**
+    NAND                                                                13
+    SDRAM                                                               14
+
+    ACE                                                                 16
+    EMAC                                                                17
+    TS                                                                  18
+
+    SPI0                                                                20
+    SPI1                                                                21
+    SPI2                                                                22
+    SPI3                                                                23
+    PATA                                                                24
+    SATA                                                                25**
+    GPS                                                                 26*
+
+    VE                                                                  32
+    TVD                                                                 33
+    TVE0                                                                34
+    TVE1                                                                35
+    LCD0                                                                36
+    LCD1                                                                37
+
+    CSI0                                                                40
+    CSI1                                                                41
+
+    HDMI                                                                43
+    DE_BE0                                                              44
+    DE_BE1                                                              45
+    DE_FE0                                                              46
+    DE_FE1                                                              47
+
+    MP                                                                  50
+
+    MALI400                                                             52
+
+  * APB0 gates ("allwinner,sun4i-apb0-gates-clk")
+
+    CODEC                                                               0
+    SPDIF                                                               1*
+    AC97                                                                2
+    IIS                                                                 3
+
+    PIO                                                                 5
+    IR0                                                                 6
+    IR1                                                                 7
+
+    KEYPAD                                                              10
+
+  * APB1 gates ("allwinner,sun4i-apb1-gates-clk")
+
+    I2C0                                                                0
+    I2C1                                                                1
+    I2C2                                                                2
+
+    CAN                                                                 4
+    SCR                                                                 5
+    PS20                                                                6
+    PS21                                                                7
+
+    UART0                                                               16
+    UART1                                                               17
+    UART2                                                               18
+    UART3                                                               19
+    UART4                                                               20
+    UART5                                                               21
+    UART6                                                               22
+    UART7                                                               23
+
+Notation:
+ [*]:  The datasheet didn't mention these, but they are present on AW code
+ [**]: The datasheet had this marked as "NC" but they are used on AW code
diff --git a/Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt b/Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt
new file mode 100644
index 000000000000..0715695e94a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt
@@ -0,0 +1,65 @@
+Generic ARM big LITTLE cpufreq driver's DT glue
+-----------------------------------------------
+
+This is DT specific glue layer for generic cpufreq driver for big LITTLE
+systems.
+
+Both required and optional properties listed below must be defined
+under node /cpus/cpu@x. Where x is the first cpu inside a cluster.
+
+FIXME: Cpus should boot in the order specified in DT and all cpus for a cluster
+must be present contiguously. Generic DT driver will check only node 'x' for
+cpu:x.
+
+Required properties:
+- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt
+  for details
+
+Optional properties:
+- clock-latency: Specify the possible maximum transition latency for clock,
+  in unit of nanoseconds.
+
+Examples:
+
+cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+                compatible = "arm,cortex-a15";
+                reg = <0>;
+                next-level-cache = <&L2>;
+                operating-points = <
+                        /* kHz    uV */
+                        792000  1100000
+                        396000  950000
+                        198000  850000
+                >;
+                clock-latency = <61036>; /* two CLK32 periods */
+        };
+
+        cpu@1 {
+                compatible = "arm,cortex-a15";
+                reg = <1>;
+                next-level-cache = <&L2>;
+        };
+
+        cpu@100 {
+                compatible = "arm,cortex-a7";
+                reg = <100>;
+                next-level-cache = <&L2>;
+                operating-points = <
+                        /* kHz    uV */
+                        792000  950000
+                        396000  750000
+                        198000  450000
+                >;
+                clock-latency = <61036>; /* two CLK32 periods */
+        };
+
+        cpu@101 {
+                compatible = "arm,cortex-a7";
+                reg = <101>;
+                next-level-cache = <&L2>;
+        };
+};
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
index 4416ccc33472..051f764bedb8 100644
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
@@ -32,7 +32,7 @@ cpus {
                         396000  950000
                         198000  850000
                 >;
-                transition-latency = <61036>; /* two CLK32 periods */
+                clock-latency = <61036>; /* two CLK32 periods */
         };
 
         cpu@1 {
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-exynos5440.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-exynos5440.txt
new file mode 100644
index 000000000000..caff1a57436f
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-exynos5440.txt
@@ -0,0 +1,28 @@
+
+Exynos5440 cpufreq driver
+-------------------
+
+Exynos5440 SoC cpufreq driver for CPU frequency scaling.
+
+Required properties:
+- interrupts: Interrupt to know the completion of cpu frequency change.
+- operating-points: Table of frequencies and voltage CPU could be transitioned into,
+        in the decreasing order. Frequency should be in KHz units and voltage
+        should be in microvolts.
+
+Optional properties:
+- clock-latency: Clock monitor latency in microsecond.
+
+All the required listed above must be defined under node cpufreq.
+
+Example:
+--------
+        cpufreq@160000 {
+                compatible = "samsung,exynos5440-cpufreq";
+                reg = <0x160000 0x1000>;
+                interrupts = <0 57 0>;
+                operating-points = <
+                                1000000 975000
+                                800000  925000>;
+                clock-latency = <100000>;
+        };
diff --git a/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt b/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt
new file mode 100644
index 000000000000..5c65eccd0e56
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt
@@ -0,0 +1,15 @@
+Freescale SAHARA Cryptographic Accelerator included in some i.MX chips.
+Currently only i.MX27 is supported.
+
+Required properties:
+- compatible : Should be "fsl,<soc>-sahara"
+- reg : Should contain SAHARA registers location and length
+- interrupts : Should contain SAHARA interrupt number
+
+Example:
+
+sah@10025000 {
+        compatible = "fsl,imx27-sahara";
+        reg = < 0x10025000 0x800>;
+        interrupts = <75>;
+};
diff --git a/Documentation/devicetree/bindings/drm/exynos/g2d.txt b/Documentation/devicetree/bindings/drm/exynos/g2d.txt
deleted file mode 100644
index 1eb124d35a99..000000000000
--- a/Documentation/devicetree/bindings/drm/exynos/g2d.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Samsung 2D Graphic Accelerator using DRM frame work
-
-Samsung FIMG2D is a graphics 2D accelerator which supports Bit Block Transfer.
-We set the drawing-context registers for configuring rendering parameters and
-then start rendering.
-This driver is for SOCs which contain G2D IPs with version 4.1.
-
-Required properties:
-        -compatible:
-                should be "samsung,exynos-g2d-41".
-        -reg:
-                physical base address of the controller and length
-                of memory mapped region.
-        -interrupts:
-                interrupt combiner values.
-
-Example:
-        g2d {
-                compatible = "samsung,exynos-g2d-41";
-                reg = <0x10850000 0x1000>;
-                interrupts = <0 91 0>;
-        };
diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt
index a33628759d36..d933af370697 100644
--- a/Documentation/devicetree/bindings/gpio/gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio.txt
@@ -98,7 +98,7 @@ announce the pinrange to the pin ctrl subsystem. For example,
                 compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
                 reg = <0x1460 0x18>;
                 gpio-controller;
-                gpio-ranges = <&pinctrl1 20 10>, <&pinctrl2 50 20>;
+                gpio-ranges = <&pinctrl1 0 20 10>, <&pinctrl2 10 50 20>;
 
     }
 
@@ -107,8 +107,8 @@ where,
 
    Next values specify the base pin and number of pins for the range
    handled by 'qe_pio_e' gpio. In the given example from base pin 20 to
-   pin 29 under pinctrl1 and pin 50 to pin 69 under pinctrl2 is handled
-   by this gpio controller.
+   pin 29 under pinctrl1 with gpio offset 0 and pin 50 to pin 69 under
+   pinctrl2 with gpio offset 10 is handled by this gpio controller.
 
 The pinctrl node must have "#gpio-range-cells" property to show number of
 arguments to pass with phandle from gpio controllers node.
diff --git a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
new file mode 100644
index 000000000000..c6f66674f19c
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
@@ -0,0 +1,29 @@
+NTC Thermistor hwmon sensors
+-------------------------------
+
+Requires node properties:
+- "compatible" value : one of
+        "ntc,ncp15wb473"
+        "ntc,ncp18wb473"
+        "ntc,ncp21wb473"
+        "ntc,ncp03wb473"
+        "ntc,ncp15wl333"
+- "pullup-uv"   Pull up voltage in micro volts
+- "pullup-ohm"  Pull up resistor value in ohms
+- "pulldown-ohm" Pull down resistor value in ohms
+- "connected-positive" Always ON, If not specified.
+                Status change is possible.
+- "io-channels" Channel node of ADC to be used for
+                conversion.
+
+Read more about iio bindings at
+        Documentation/devicetree/bindings/iio/iio-bindings.txt
+
+Example:
+        ncp15wb473@0 {
+                compatible = "ntc,ncp15wb473";
+                pullup-uv = <1800000>;
+                pullup-ohm = <47000>;
+                pulldown-ohm = <0>;
+                io-channels = <&adc 3>;
+        };
diff --git a/Documentation/devicetree/bindings/hwrng/timeriomem_rng.txt b/Documentation/devicetree/bindings/hwrng/timeriomem_rng.txt
new file mode 100644
index 000000000000..6616d15866a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwrng/timeriomem_rng.txt
@@ -0,0 +1,18 @@
+HWRNG support for the timeriomem_rng driver
+
+Required properties:
+- compatible : "timeriomem_rng"
+- reg : base address to sample from
+- period : wait time in microseconds to use between samples
+
+N.B. currently 'reg' must be four bytes wide and aligned
+
+Example:
+
+hwrng@44 {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "timeriomem_rng";
+        reg = <0x44 0x04>;
+        period = <1000000>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt b/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt
new file mode 100644
index 000000000000..1ac8ea8ade1d
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt
@@ -0,0 +1,80 @@
+GPIO-based I2C Arbitration Using a Challenge & Response Mechanism
+=================================================================
+This uses GPIO lines and a challenge & response mechanism to arbitrate who is
+the master of an I2C bus in a multimaster situation.
+
+In many cases using GPIOs to arbitrate is not needed and a design can use
+the standard I2C multi-master rules.  Using GPIOs is generally useful in
+the case where there is a device on the bus that has errata and/or bugs
+that makes standard multimaster mode not feasible.
+
+
+Algorithm:
+
+All masters on the bus have a 'bus claim' line which is an output that the
+others can see. These are all active low with pull-ups enabled.  We'll
+describe these lines as:
+
+- OUR_CLAIM: output from us signaling to other hosts that we want the bus
+- THEIR_CLAIMS: output from others signaling that they want the bus
+
+The basic algorithm is to assert your line when you want the bus, then make
+sure that the other side doesn't want it also.  A detailed explanation is best
+done with an example.
+
+Let's say we want to claim the bus.  We:
+1. Assert OUR_CLAIM.
+2. Waits a little bit for the other sides to notice (slew time, say 10
+   microseconds).
+3. Check THEIR_CLAIMS.  If none are asserted then the we have the bus and we are
+   done.
+4. Otherwise, wait for a few milliseconds and see if THEIR_CLAIMS are released.
+5. If not, back off, release the claim and wait for a few more milliseconds.
+6. Go back to 1 (until retry time has expired).
+
+
+Required properties:
+- compatible: i2c-arb-gpio-challenge
+- our-claim-gpio: The GPIO that we use to claim the bus.
+- their-claim-gpios: The GPIOs that the other sides use to claim the bus.
+  Note that some implementations may only support a single other master.
+- Standard I2C mux properties. See mux.txt in this directory.
+- Single I2C child bus node at reg 0. See mux.txt in this directory.
+
+Optional properties:
+- slew-delay-us: microseconds to wait for a GPIO to go high. Default is 10 us.
+- wait-retry-us: we'll attempt another claim after this many microseconds.
+    Default is 3000 us.
+- wait-free-us: we'll give up after this many microseconds. Default is 50000 us.
+
+
+Example:
+        i2c@12CA0000 {
+                compatible = "acme,some-i2c-device";
+                #address-cells = <1>;
+                #size-cells = <0>;
+        };
+
+        i2c-arbitrator {
+                compatible = "i2c-arb-gpio-challenge";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                i2c-parent = <&{/i2c@12CA0000}>;
+
+                our-claim-gpio = <&gpf0 3 1>;
+                their-claim-gpios = <&gpe0 4 1>;
+                slew-delay-us = <10>;
+                wait-retry-us = <3000>;
+                wait-free-us = <50000>;
+
+                i2c@0 {
+                        reg = <0>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        i2c@52 {
+                                // Normal I2C device
+                        };
+                };
+        };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
index f98d4c5b5cca..296eb4536129 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
@@ -26,7 +26,7 @@ Required for all cases except "samsung,s3c2440-hdmiphy-i2c":
     - pinctrl-names: Should contain only one value - "default".
 
 Optional properties:
-  - samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not
+  - samsung,i2c-slave-addr: Slave address in multi-master environment. If not
     specified, default value is 0.
   - samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not
     specified, the default value in Hz is 100000.
diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index 446859fcdca4..ad6a73852f08 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -35,6 +35,8 @@ fsl,mc13892		MC13892: Power Management Integrated Circuit (PMIC) for i.MX35/51
 fsl,mma8450             MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer
 fsl,mpr121              MPR121: Proximity Capacitive Touch Sensor Controller
 fsl,sgtl5000            SGTL5000: Ultra Low-Power Audio Codec
+infineon,slb9635tt      Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz)
+infineon,slb9645tt      Infineon SLB9645 I2C TPM (new protocol, max 400khz)
 maxim,ds1050            5 Bit Programmable, Pulse-Width Modulator
 maxim,max1237           Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs
 maxim,max6625           9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface
diff --git a/Documentation/devicetree/bindings/iio/iio-bindings.txt b/Documentation/devicetree/bindings/iio/iio-bindings.txt
new file mode 100644
index 000000000000..0b447d9ad196
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/iio-bindings.txt
@@ -0,0 +1,97 @@
+This binding is derived from clock bindings, and based on suggestions
+from Lars-Peter Clausen [1].
+
+Sources of IIO channels can be represented by any node in the device
+tree. Those nodes are designated as IIO providers. IIO consumer
+nodes use a phandle and IIO specifier pair to connect IIO provider
+outputs to IIO inputs. Similar to the gpio specifiers, an IIO
+specifier is an array of one or more cells identifying the IIO
+output on a device. The length of an IIO specifier is defined by the
+value of a #io-channel-cells property in the IIO provider node.
+
+[1] http://marc.info/?l=linux-iio&m=135902119507483&w=2
+
+==IIO providers==
+
+Required properties:
+#io-channel-cells: Number of cells in an IIO specifier; Typically 0 for nodes
+                   with a single IIO output and 1 for nodes with multiple
+                   IIO outputs.
+
+Example for a simple configuration with no trigger:
+
+        adc: voltage-sensor@35 {
+                compatible = "maxim,max1139";
+                reg = <0x35>;
+                #io-channel-cells = <1>;
+        };
+
+Example for a configuration with trigger:
+
+        adc@35 {
+                compatible = "some-vendor,some-adc";
+                reg = <0x35>;
+
+                adc1: iio-device@0 {
+                        #io-channel-cells = <1>;
+                        /* other properties */
+                };
+                adc2: iio-device@1 {
+                        #io-channel-cells = <1>;
+                        /* other properties */
+                };
+        };
+
+==IIO consumers==
+
+Required properties:
+io-channels:    List of phandle and IIO specifier pairs, one pair
+                for each IIO input to the device. Note: if the
+                IIO provider specifies '0' for #io-channel-cells,
+                then only the phandle portion of the pair will appear.
+
+Optional properties:
+io-channel-names:
+                List of IIO input name strings sorted in the same
+                order as the io-channels property. Consumers drivers
+                will use io-channel-names to match IIO input names
+                with IIO specifiers.
+io-channel-ranges:
+                Empty property indicating that child nodes can inherit named
+                IIO channels from this node. Useful for bus nodes to provide
+                and IIO channel to their children.
+
+For example:
+
+        device {
+                io-channels = <&adc 1>, <&ref 0>;
+                io-channel-names = "vcc", "vdd";
+        };
+
+This represents a device with two IIO inputs, named "vcc" and "vdd".
+The vcc channel is connected to output 1 of the &adc device, and the
+vdd channel is connected to output 0 of the &ref device.
+
+==Example==
+
+        adc: max1139@35 {
+                compatible = "maxim,max1139";
+                reg = <0x35>;
+                #io-channel-cells = <1>;
+        };
+
+        ...
+
+        iio_hwmon {
+                compatible = "iio-hwmon";
+                io-channels = <&adc 0>, <&adc 1>, <&adc 2>,
+                        <&adc 3>, <&adc 4>, <&adc 5>,
+                        <&adc 6>, <&adc 7>, <&adc 8>,
+                        <&adc 9>;
+        };
+
+        some_consumer {
+                compatible = "some-consumer";
+                io-channels = <&adc 10>, <&adc 11>;
+                io-channel-names = "adc1", "adc2";
+        };
diff --git a/Documentation/devicetree/bindings/input/ps2keyb-mouse-apbps2.txt b/Documentation/devicetree/bindings/input/ps2keyb-mouse-apbps2.txt
new file mode 100644
index 000000000000..3029c5694cf6
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ps2keyb-mouse-apbps2.txt
@@ -0,0 +1,16 @@
+Aeroflex Gaisler APBPS2 PS/2 Core, supporting Keyboard or Mouse.
+
+The APBPS2 PS/2 core is available in the GRLIB VHDL IP core library.
+
+Note: In the ordinary environment for the APBPS2 core, a LEON SPARC system,
+these properties are built from information in the AMBA plug&play and from
+bootloader settings.
+
+Required properties:
+
+- name : Should be "GAISLER_APBPS2" or "01_060"
+- reg : Address and length of the register set for the device
+- interrupts : Interrupt numbers for this device
+
+For further information look in the documentation for the GLIB IP core library:
+http://www.gaisler.com/products/grlib/grip.pdf
diff --git a/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt
new file mode 100644
index 000000000000..f40f21c642b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt
@@ -0,0 +1,30 @@
+* AUO in-cell touchscreen controller using Pixcir sensors
+
+Required properties:
+- compatible: must be "auo,auo_pixcir_ts"
+- reg: I2C address of the chip
+- interrupts: interrupt to which the chip is connected
+- gpios: gpios the chip is connected to
+  first one is the interrupt gpio and second one the reset gpio
+- x-size: horizontal resolution of touchscreen
+- y-size: vertical resolution of touchscreen
+
+Example:
+
+        i2c@00000000 {
+                /* ... */
+
+                auo_pixcir_ts@5c {
+                        compatible = "auo,auo_pixcir_ts";
+                        reg = <0x5c>;
+                        interrupts = <2 0>;
+
+                        gpios = <&gpf 2 0 2>, /* INT */
+                                <&gpf 5 1 0>; /* RST */
+
+                        x-size = <800>;
+                        y-size = <600>;
+                };
+
+                /* ... */
+        };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt b/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt
new file mode 100644
index 000000000000..64ad48b824a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt
@@ -0,0 +1,24 @@
+* Sitronix st1232 touchscreen controller
+
+Required properties:
+- compatible: must be "sitronix,st1232"
+- reg: I2C address of the chip
+- interrupts: interrupt to which the chip is connected
+
+Optional properties:
+- gpios: a phandle to the reset GPIO
+
+Example:
+
+        i2c@00000000 {
+                /* ... */
+
+                touchscreen@55 {
+                        compatible = "sitronix,st1232";
+                        reg = <0x55>;
+                        interrupts = <2 0>;
+                        gpios = <&gpio1 166 0>;
+                };
+
+                /* ... */
+        };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt
index 7f9fb85f5456..e7f4dc14eff2 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-ic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt
@@ -2,7 +2,7 @@ Allwinner Sunxi Interrupt Controller
 
 Required properties:
 
-- compatible : should be "allwinner,sunxi-ic"
+- compatible : should be "allwinner,sun4i-ic"
 - reg : Specifies base physical address and size of the registers.
 - interrupt-controller : Identifies the node as an interrupt controller
 - #interrupt-cells : Specifies the number of cells needed to encode an
@@ -97,7 +97,7 @@ The interrupt sources are as follows:
 Example:
 
 intc: interrupt-controller {
-        compatible = "allwinner,sunxi-ic";
+        compatible = "allwinner,sun4i-ic";
         reg = <0x01c20400 0x400>;
         interrupt-controller;
         #interrupt-cells = <2>;
diff --git a/Documentation/devicetree/bindings/leds/tca6507.txt b/Documentation/devicetree/bindings/leds/tca6507.txt
index 2b6693b972fb..80ff3dfb1f32 100644
--- a/Documentation/devicetree/bindings/leds/tca6507.txt
+++ b/Documentation/devicetree/bindings/leds/tca6507.txt
@@ -1,4 +1,4 @@
-LEDs conected to tca6507
+LEDs connected to tca6507
 
 Required properties:
 - compatible : should be : "ti,tca6507".
diff --git a/Documentation/devicetree/bindings/marvell.txt b/Documentation/devicetree/bindings/marvell.txt
index f1533d91953a..f7a0da6b4022 100644
--- a/Documentation/devicetree/bindings/marvell.txt
+++ b/Documentation/devicetree/bindings/marvell.txt
@@ -115,6 +115,9 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd.
      - compatible : "marvell,mv64360-eth-block"
      - reg : Offset and length of the register set for this block
 
+   Optional properties:
+     - clocks : Phandle to the clock control device and gate bit
+
    Example Discovery Ethernet block node:
      ethernet-block@2000 {
              #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/media/coda.txt b/Documentation/devicetree/bindings/media/coda.txt
new file mode 100644
index 000000000000..2865d04e4030
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/coda.txt
@@ -0,0 +1,30 @@
+Chips&Media Coda multi-standard codec IP
+========================================
+
+Coda codec IPs are present in i.MX SoCs in various versions,
+called VPU (Video Processing Unit).
+
+Required properties:
+- compatible : should be "fsl,<chip>-src" for i.MX SoCs:
+  (a) "fsl,imx27-vpu" for CodaDx6 present in i.MX27
+  (b) "fsl,imx53-vpu" for CODA7541 present in i.MX53
+  (c) "fsl,imx6q-vpu" for CODA960 present in i.MX6q
+- reg: should be register base and length as documented in the
+  SoC reference manual
+- interrupts : Should contain the VPU interrupt. For CODA960,
+  a second interrupt is needed for the MJPEG unit.
+- clocks : Should contain the ahb and per clocks, in the order
+  determined by the clock-names property.
+- clock-names : Should be "ahb", "per"
+- iram : phandle pointing to the SRAM device node
+
+Example:
+
+vpu: vpu@63ff4000 {
+        compatible = "fsl,imx53-vpu";
+        reg = <0x63ff4000 0x1000>;
+        interrupts = <9>;
+        clocks = <&clks 63>, <&clks 63>;
+        clock-names = "ahb", "per";
+        iram = <&ocram>;
+};
diff --git a/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt b/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt
new file mode 100644
index 000000000000..3f62adfb3e0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt
@@ -0,0 +1,14 @@
+Exynos4x12/Exynos5 SoC series camera host interface (FIMC-LITE)
+
+Required properties:
+
+- compatible    : should be "samsung,exynos4212-fimc" for Exynos4212 and
+                  Exynos4412 SoCs;
+- reg           : physical base address and size of the device memory mapped
+                  registers;
+- interrupts    : should contain FIMC-LITE interrupt;
+- clocks        : FIMC LITE gate clock should be specified in this property.
+- clock-names   : should contain "flite" entry.
+
+Each FIMC device should have an alias in the aliases node, in the form of
+fimc-lite<n>, where <n> is an integer specifying the IP block instance.
diff --git a/Documentation/devicetree/bindings/media/exynos4-fimc-is.txt b/Documentation/devicetree/bindings/media/exynos4-fimc-is.txt
new file mode 100644
index 000000000000..55c9ad6f9599
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/exynos4-fimc-is.txt
@@ -0,0 +1,49 @@
+Exynos4x12 SoC series Imaging Subsystem (FIMC-IS)
+
+The FIMC-IS is a subsystem for processing image signal from an image sensor.
+The Exynos4x12 SoC series FIMC-IS V1.5 comprises of a dedicated ARM Cortex-A5
+processor, ISP, DRC and FD IP blocks and peripheral devices such as UART, I2C
+and SPI bus controllers, PWM and ADC.
+
+fimc-is node
+------------
+
+Required properties:
+- compatible    : should be "samsung,exynos4212-fimc-is" for Exynos4212 and
+                  Exynos4412 SoCs;
+- reg           : physical base address and length of the registers set;
+- interrupts    : must contain two FIMC-IS interrupts, in order: ISP0, ISP1;
+- clocks        : list of clock specifiers, corresponding to entries in
+                  clock-names property;
+- clock-names   : must contain "ppmuispx", "ppmuispx", "lite0", "lite1"
+                  "mpll", "sysreg", "isp", "drc", "fd", "mcuisp", "uart",
+                  "ispdiv0", "ispdiv1", "mcuispdiv0", "mcuispdiv1", "aclk200",
+                  "div_aclk200", "aclk400mcuisp", "div_aclk400mcuisp" entries,
+                  matching entries in the clocks property.
+pmu subnode
+-----------
+
+Required properties:
+ - reg : must contain PMU physical base address and size of the register set.
+
+The following are the FIMC-IS peripheral device nodes and can be specified
+either standalone or as the fimc-is node child nodes.
+
+i2c-isp (ISP I2C bus controller) nodes
+------------------------------------------
+
+Required properties:
+
+- compatible    : should be "samsung,exynos4212-i2c-isp" for Exynos4212 and
+                  Exynos4412 SoCs;
+- reg           : physical base address and length of the registers set;
+- clocks        : must contain gate clock specifier for this controller;
+- clock-names   : must contain "i2c_isp" entry.
+
+For the above nodes it is required to specify a pinctrl state named "default",
+according to the pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt.
+
+Device tree nodes of the image sensors' controlled directly by the FIMC-IS
+firmware must be child nodes of their corresponding ISP I2C bus controller node.
+The data link of these image sensors must be specified using the common video
+interfaces bindings, defined in video-interfaces.txt.
diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt
new file mode 100644
index 000000000000..51c776b7f7a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt
@@ -0,0 +1,197 @@
+Samsung S5P/EXYNOS SoC Camera Subsystem (FIMC)
+----------------------------------------------
+
+The S5P/Exynos SoC Camera subsystem comprises of multiple sub-devices
+represented by separate device tree nodes. Currently this includes: FIMC (in
+the S5P SoCs series known as CAMIF), MIPI CSIS, FIMC-LITE and FIMC-IS (ISP).
+
+The sub-subdevices are defined as child nodes of the common 'camera' node which
+also includes common properties of the whole subsystem not really specific to
+any single sub-device, like common camera port pins or the CAMCLK clock outputs
+for external image sensors attached to an SoC.
+
+Common 'camera' node
+--------------------
+
+Required properties:
+
+- compatible    : must be "samsung,fimc", "simple-bus"
+- clocks        : list of clock specifiers, corresponding to entries in
+                  the clock-names property;
+- clock-names   : must contain "sclk_cam0", "sclk_cam1", "pxl_async0",
+                  "pxl_async1" entries, matching entries in the clocks property.
+
+The pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt must be used
+to define a required pinctrl state named "default" and optional pinctrl states:
+"idle", "active-a", active-b". These optional states can be used to switch the
+camera port pinmux at runtime. The "idle" state should configure both the camera
+ports A and B into high impedance state, especially the CAMCLK clock output
+should be inactive. For the "active-a" state the camera port A must be activated
+and the port B deactivated and for the state "active-b" it should be the other
+way around.
+
+The 'camera' node must include at least one 'fimc' child node.
+
+'fimc' device nodes
+-------------------
+
+Required properties:
+
+- compatible: "samsung,s5pv210-fimc" for S5PV210, "samsung,exynos4210-fimc"
+  for Exynos4210 and "samsung,exynos4212-fimc" for Exynos4x12 SoCs;
+- reg: physical base address and length of the registers set for the device;
+- interrupts: should contain FIMC interrupt;
+- clocks: list of clock specifiers, must contain an entry for each required
+  entry in clock-names;
+- clock-names: must contain "fimc", "sclk_fimc" entries.
+- samsung,pix-limits: an array of maximum supported image sizes in pixels, for
+  details refer to Table 2-1 in the S5PV210 SoC User Manual; The meaning of
+  each cell is as follows:
+  0 - scaler input horizontal size,
+  1 - input horizontal size for the scaler bypassed,
+  2 - REAL_WIDTH without input rotation,
+  3 - REAL_HEIGHT with input rotation,
+- samsung,sysreg: a phandle to the SYSREG node.
+
+Each FIMC device should have an alias in the aliases node, in the form of
+fimc<n>, where <n> is an integer specifying the IP block instance.
+
+Optional properties:
+
+- clock-frequency: maximum FIMC local clock (LCLK) frequency;
+- samsung,min-pix-sizes: an array specyfing minimum image size in pixels at
+  the FIMC input and output DMA, in the first and second cell respectively.
+  Default value when this property is not present is <16 16>;
+- samsung,min-pix-alignment: minimum supported image height alignment (first
+  cell) and the horizontal image offset (second cell). The values are in pixels
+  and default to <2 1> when this property is not present;
+- samsung,mainscaler-ext: a boolean property indicating whether the FIMC IP
+  supports extended image size and has CIEXTEN register;
+- samsung,rotators: a bitmask specifying whether this IP has the input and
+  the output rotator. Bits 4 and 0 correspond to input and output rotator
+  respectively. If a rotator is present its corresponding bit should be set.
+  Default value when this property is not specified is 0x11.
+- samsung,cam-if: a bolean property indicating whether the IP block includes
+  the camera input interface.
+- samsung,isp-wb: this property must be present if the IP block has the ISP
+  writeback input.
+- samsung,lcd-wb: this property must be present if the IP block has the LCD
+  writeback input.
+
+
+'parallel-ports' node
+---------------------
+
+This node should contain child 'port' nodes specifying active parallel video
+input ports. It includes camera A and camera B inputs. 'reg' property in the
+port nodes specifies data input - 0, 1 indicates input A, B respectively.
+
+Optional properties
+
+- samsung,camclk-out : specifies clock output for remote sensor,
+                       0 - CAM_A_CLKOUT, 1 - CAM_B_CLKOUT;
+
+Image sensor nodes
+------------------
+
+The sensor device nodes should be added to their control bus controller (e.g.
+I2C0) nodes and linked to a port node in the csis or the parallel-ports node,
+using the common video interfaces bindings, defined in video-interfaces.txt.
+The implementation of this bindings requires clock-frequency property to be
+present in the sensor device nodes.
+
+Example:
+
+        aliases {
+                fimc0 = &fimc_0;
+        };
+
+        /* Parallel bus IF sensor */
+        i2c_0: i2c@13860000 {
+                s5k6aa: sensor@3c {
+                        compatible = "samsung,s5k6aafx";
+                        reg = <0x3c>;
+                        vddio-supply = <...>;
+
+                        clock-frequency = <24000000>;
+                        clocks = <...>;
+                        clock-names = "mclk";
+
+                        port {
+                                s5k6aa_ep: endpoint {
+                                        remote-endpoint = <&fimc0_ep>;
+                                        bus-width = <8>;
+                                        hsync-active = <0>;
+                                        vsync-active = <1>;
+                                        pclk-sample = <1>;
+                                };
+                        };
+                };
+        };
+
+        /* MIPI CSI-2 bus IF sensor */
+        s5c73m3: sensor@0x1a {
+                compatible = "samsung,s5c73m3";
+                reg = <0x1a>;
+                vddio-supply = <...>;
+
+                clock-frequency = <24000000>;
+                clocks = <...>;
+                clock-names = "mclk";
+
+                port {
+                        s5c73m3_1: endpoint {
+                                data-lanes = <1 2 3 4>;
+                                remote-endpoint = <&csis0_ep>;
+                        };
+                };
+        };
+
+        camera {
+                compatible = "samsung,fimc", "simple-bus";
+                #address-cells = <1>;
+                #size-cells = <1>;
+                status = "okay";
+
+                pinctrl-names = "default";
+                pinctrl-0 = <&cam_port_a_clk_active>;
+
+                /* parallel camera ports */
+                parallel-ports {
+                        /* camera A input */
+                        port@0 {
+                                reg = <0>;
+                                fimc0_ep: endpoint {
+                                        remote-endpoint = <&s5k6aa_ep>;
+                                        bus-width = <8>;
+                                        hsync-active = <0>;
+                                        vsync-active = <1>;
+                                        pclk-sample = <1>;
+                                };
+                        };
+                };
+
+                fimc_0: fimc@11800000 {
+                        compatible = "samsung,exynos4210-fimc";
+                        reg = <0x11800000 0x1000>;
+                        interrupts = <0 85 0>;
+                        status = "okay";
+                };
+
+                csis_0: csis@11880000 {
+                        compatible = "samsung,exynos4210-csis";
+                        reg = <0x11880000 0x1000>;
+                        interrupts = <0 78 0>;
+                        /* camera C input */
+                        port@3 {
+                                reg = <3>;
+                                csis0_ep: endpoint {
+                                        remote-endpoint = <&s5c73m3_ep>;
+                                        data-lanes = <1 2 3 4>;
+                                        samsung,csis-hs-settle = <12>;
+                                };
+                        };
+                };
+        };
+
+The MIPI-CSIS device binding is defined in samsung-mipi-csis.txt.
diff --git a/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt b/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt
new file mode 100644
index 000000000000..5f8e28e2484f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt
@@ -0,0 +1,81 @@
+Samsung S5P/EXYNOS SoC series MIPI CSI-2 receiver (MIPI CSIS)
+-------------------------------------------------------------
+
+Required properties:
+
+- compatible      : "samsung,s5pv210-csis" for S5PV210 (S5PC110),
+                    "samsung,exynos4210-csis" for Exynos4210 (S5PC210),
+                    "samsung,exynos4212-csis" for Exynos4212/Exynos4412
+                    SoC series;
+- reg             : offset and length of the register set for the device;
+- interrupts      : should contain MIPI CSIS interrupt; the format of the
+                    interrupt specifier depends on the interrupt controller;
+- bus-width       : maximum number of data lanes supported (SoC specific);
+- vddio-supply    : MIPI CSIS I/O and PLL voltage supply (e.g. 1.8V);
+- vddcore-supply  : MIPI CSIS Core voltage supply (e.g. 1.1V);
+- clocks          : list of clock specifiers, corresponding to entries in
+                    clock-names property;
+- clock-names     : must contain "csis", "sclk_csis" entries, matching entries
+                    in the clocks property.
+
+Optional properties:
+
+- clock-frequency : The IP's main (system bus) clock frequency in Hz, default
+                    value when this property is not specified is 166 MHz;
+- samsung,csis-wclk : CSI-2 wrapper clock selection. If this property is present
+                    external clock from CMU will be used, or the bus clock if
+                    if it's not specified.
+
+The device node should contain one 'port' child node with one child 'endpoint'
+node, according to the bindings defined in Documentation/devicetree/bindings/
+media/video-interfaces.txt. The following are properties specific to those nodes.
+
+port node
+---------
+
+- reg             : (required) must be 3 for camera C input (CSIS0) or 4 for
+                    camera D input (CSIS1);
+
+endpoint node
+-------------
+
+- data-lanes      : (required) an array specifying active physical MIPI-CSI2
+                    data input lanes and their mapping to logical lanes; the
+                    array's content is unused, only its length is meaningful;
+
+- samsung,csis-hs-settle : (optional) differential receiver (HS-RX) settle time;
+
+
+Example:
+
+        reg0: regulator@0 {
+        };
+
+        reg1: regulator@1 {
+        };
+
+/* SoC properties */
+
+        csis_0: csis@11880000 {
+                compatible = "samsung,exynos4210-csis";
+                reg = <0x11880000 0x1000>;
+                interrupts = <0 78 0>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+        };
+
+/* Board properties */
+
+        csis_0: csis@11880000 {
+                clock-frequency = <166000000>;
+                vddio-supply = <&reg0>;
+                vddcore-supply = <&reg1>;
+                port {
+                        reg = <3>; /* 3 - CSIS0, 4 - CSIS1 */
+                        csis0_ep: endpoint {
+                                remote-endpoint = <...>;
+                                data-lanes = <1>, <2>;
+                                samsung,csis-hs-settle = <12>;
+                        };
+                };
+        };
diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt
new file mode 100644
index 000000000000..e022d2dc4962
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/video-interfaces.txt
@@ -0,0 +1,228 @@
+Common bindings for video receiver and transmitter interfaces
+
+General concept
+---------------
+
+Video data pipelines usually consist of external devices, e.g. camera sensors,
+controlled over an I2C, SPI or UART bus, and SoC internal IP blocks, including
+video DMA engines and video data processors.
+
+SoC internal blocks are described by DT nodes, placed similarly to other SoC
+blocks.  External devices are represented as child nodes of their respective
+bus controller nodes, e.g. I2C.
+
+Data interfaces on all video devices are described by their child 'port' nodes.
+Configuration of a port depends on other devices participating in the data
+transfer and is described by 'endpoint' subnodes.
+
+device {
+        ...
+        ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                        ...
+                        endpoint@0 { ... };
+                        endpoint@1 { ... };
+                };
+                port@1 { ... };
+        };
+};
+
+If a port can be configured to work with more than one remote device on the same
+bus, an 'endpoint' child node must be provided for each of them.  If more than
+one port is present in a device node or there is more than one endpoint at a
+port, or port node needs to be associated with a selected hardware interface,
+a common scheme using '#address-cells', '#size-cells' and 'reg' properties is
+used.
+
+All 'port' nodes can be grouped under optional 'ports' node, which allows to
+specify #address-cells, #size-cells properties independently for the 'port'
+and 'endpoint' nodes and any child device nodes a device might have.
+
+Two 'endpoint' nodes are linked with each other through their 'remote-endpoint'
+phandles.  An endpoint subnode of a device contains all properties needed for
+configuration of this device for data exchange with other device.  In most
+cases properties at the peer 'endpoint' nodes will be identical, however they
+might need to be different when there is any signal modifications on the bus
+between two devices, e.g. there are logic signal inverters on the lines.
+
+It is allowed for multiple endpoints at a port to be active simultaneously,
+where supported by a device.  For example, in case where a data interface of
+a device is partitioned into multiple data busses, e.g. 16-bit input port
+divided into two separate ITU-R BT.656 8-bit busses.  In such case bus-width
+and data-shift properties can be used to assign physical data lines to each
+endpoint node (logical bus).
+
+
+Required properties
+-------------------
+
+If there is more than one 'port' or more than one 'endpoint' node or 'reg'
+property is present in port and/or endpoint nodes the following properties
+are required in a relevant parent node:
+
+ - #address-cells : number of cells required to define port/endpoint
+                    identifier, should be 1.
+ - #size-cells    : should be zero.
+
+Optional endpoint properties
+----------------------------
+
+- remote-endpoint: phandle to an 'endpoint' subnode of a remote device node.
+- slave-mode: a boolean property indicating that the link is run in slave mode.
+  The default when this property is not specified is master mode. In the slave
+  mode horizontal and vertical synchronization signals are provided to the
+  slave device (data source) by the master device (data sink). In the master
+  mode the data source device is also the source of the synchronization signals.
+- bus-width: number of data lines actively used, valid for the parallel busses.
+- data-shift: on the parallel data busses, if bus-width is used to specify the
+  number of data lines, data-shift can be used to specify which data lines are
+  used, e.g. "bus-width=<8>; data-shift=<2>;" means, that lines 9:2 are used.
+- hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
+- vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively.
+  Note, that if HSYNC and VSYNC polarities are not specified, embedded
+  synchronization may be required, where supported.
+- data-active: similar to HSYNC and VSYNC, specifies data line polarity.
+- field-even-active: field signal level during the even field data transmission.
+- pclk-sample: sample data on rising (1) or falling (0) edge of the pixel clock
+  signal.
+- data-lanes: an array of physical data lane indexes. Position of an entry
+  determines the logical lane number, while the value of an entry indicates
+  physical lane, e.g. for 2-lane MIPI CSI-2 bus we could have
+  "data-lanes = <1 2>;", assuming the clock lane is on hardware lane 0.
+  This property is valid for serial busses only (e.g. MIPI CSI-2).
+- clock-lanes: an array of physical clock lane indexes. Position of an entry
+  determines the logical lane number, while the value of an entry indicates
+  physical lane, e.g. for a MIPI CSI-2 bus we could have "clock-lanes = <0>;",
+  which places the clock lane on hardware lane 0. This property is valid for
+  serial busses only (e.g. MIPI CSI-2). Note that for the MIPI CSI-2 bus this
+  array contains only one entry.
+- clock-noncontinuous: a boolean property to allow MIPI CSI-2 non-continuous
+  clock mode.
+
+
+Example
+-------
+
+The example snippet below describes two data pipelines.  ov772x and imx074 are
+camera sensors with a parallel and serial (MIPI CSI-2) video bus respectively.
+Both sensors are on the I2C control bus corresponding to the i2c0 controller
+node.  ov772x sensor is linked directly to the ceu0 video host interface.
+imx074 is linked to ceu0 through the MIPI CSI-2 receiver (csi2). ceu0 has a
+(single) DMA engine writing captured data to memory.  ceu0 node has a single
+'port' node which may indicate that at any time only one of the following data
+pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
+
+        ceu0: ceu@0xfe910000 {
+                compatible = "renesas,sh-mobile-ceu";
+                reg = <0xfe910000 0xa0>;
+                interrupts = <0x880>;
+
+                mclk: master_clock {
+                        compatible = "renesas,ceu-clock";
+                        #clock-cells = <1>;
+                        clock-frequency = <50000000>;   /* Max clock frequency */
+                        clock-output-names = "mclk";
+                };
+
+                port {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        /* Parallel bus endpoint */
+                        ceu0_1: endpoint@1 {
+                                reg = <1>;              /* Local endpoint # */
+                                remote = <&ov772x_1_1>; /* Remote phandle */
+                                bus-width = <8>;        /* Used data lines */
+                                data-shift = <2>;       /* Lines 9:2 are used */
+
+                                /* If hsync-active/vsync-active are missing,
+                                   embedded BT.656 sync is used */
+                                hsync-active = <0>;     /* Active low */
+                                vsync-active = <0>;     /* Active low */
+                                data-active = <1>;      /* Active high */
+                                pclk-sample = <1>;      /* Rising */
+                        };
+
+                        /* MIPI CSI-2 bus endpoint */
+                        ceu0_0: endpoint@0 {
+                                reg = <0>;
+                                remote = <&csi2_2>;
+                        };
+                };
+        };
+
+        i2c0: i2c@0xfff20000 {
+                ...
+                ov772x_1: camera@0x21 {
+                        compatible = "omnivision,ov772x";
+                        reg = <0x21>;
+                        vddio-supply = <&regulator1>;
+                        vddcore-supply = <&regulator2>;
+
+                        clock-frequency = <20000000>;
+                        clocks = <&mclk 0>;
+                        clock-names = "xclk";
+
+                        port {
+                                /* With 1 endpoint per port no need for addresses. */
+                                ov772x_1_1: endpoint {
+                                        bus-width = <8>;
+                                        remote-endpoint = <&ceu0_1>;
+                                        hsync-active = <1>;
+                                        vsync-active = <0>; /* Who came up with an
+                                                               inverter here ?... */
+                                        data-active = <1>;
+                                        pclk-sample = <1>;
+                                };
+                        };
+                };
+
+                imx074: camera@0x1a {
+                        compatible = "sony,imx074";
+                        reg = <0x1a>;
+                        vddio-supply = <&regulator1>;
+                        vddcore-supply = <&regulator2>;
+
+                        clock-frequency = <30000000>;   /* Shared clock with ov772x_1 */
+                        clocks = <&mclk 0>;
+                        clock-names = "sysclk";         /* Assuming this is the
+                                                           name in the datasheet */
+                        port {
+                                imx074_1: endpoint {
+                                        clock-lanes = <0>;
+                                        data-lanes = <1 2>;
+                                        remote-endpoint = <&csi2_1>;
+                                };
+                        };
+                };
+        };
+
+        csi2: csi2@0xffc90000 {
+                compatible = "renesas,sh-mobile-csi2";
+                reg = <0xffc90000 0x1000>;
+                interrupts = <0x17a0>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@1 {
+                        compatible = "renesas,csi2c";   /* One of CSI2I and CSI2C. */
+                        reg = <1>;                      /* CSI-2 PHY #1 of 2: PHY_S,
+                                                           PHY_M has port address 0,
+                                                           is unused. */
+                        csi2_1: endpoint {
+                                clock-lanes = <0>;
+                                data-lanes = <2 1>;
+                                remote-endpoint = <&imx074_1>;
+                        };
+                };
+                port@2 {
+                        reg = <2>;                      /* port 2: link to the CEU */
+
+                        csi2_2: endpoint {
+                                remote-endpoint = <&ceu0_0>;
+                        };
+                };
+        };
diff --git a/Documentation/devicetree/bindings/metag/meta-intc.txt b/Documentation/devicetree/bindings/metag/meta-intc.txt
index 8c47dcbfabc6..80994adab392 100644
--- a/Documentation/devicetree/bindings/metag/meta-intc.txt
+++ b/Documentation/devicetree/bindings/metag/meta-intc.txt
@@ -12,7 +12,7 @@ Required properties:
       handle 32 interrupt sources).
 
     - interrupt-controller: The presence of this property identifies the node
-      as an interupt controller. No property value shall be defined.
+      as an interrupt controller. No property value shall be defined.
 
     - #interrupt-cells: Specifies the number of cells needed to encode an
       interrupt source. The type shall be a <u32> and the value shall be 2.
diff --git a/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
index baf07987ae68..abd9e3cb2db7 100644
--- a/Documentation/devicetree/bindings/mfd/mc13xxx.txt
+++ b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
@@ -10,10 +10,40 @@ Optional properties:
 - fsl,mc13xxx-uses-touch : Indicate the touchscreen controller is being used
 
 Sub-nodes:
-- regulators : Contain the regulator nodes.  The MC13892 regulators are
-  bound using their names as listed below with their registers and bits
-  for enabling.
+- regulators : Contain the regulator nodes. The regulators are bound using
+  their names as listed below with their registers and bits for enabling.
 
+MC13783 regulators:
+    sw1a      : regulator SW1A      (register 24, bit 0)
+    sw1b      : regulator SW1B      (register 25, bit 0)
+    sw2a      : regulator SW2A      (register 26, bit 0)
+    sw2b      : regulator SW2B      (register 27, bit 0)
+    sw3       : regulator SW3       (register 29, bit 20)
+    vaudio    : regulator VAUDIO    (register 32, bit 0)
+    viohi     : regulator VIOHI     (register 32, bit 3)
+    violo     : regulator VIOLO     (register 32, bit 6)
+    vdig      : regulator VDIG      (register 32, bit 9)
+    vgen      : regulator VGEN      (register 32, bit 12)
+    vrfdig    : regulator VRFDIG    (register 32, bit 15)
+    vrfref    : regulator VRFREF    (register 32, bit 18)
+    vrfcp     : regulator VRFCP     (register 32, bit 21)
+    vsim      : regulator VSIM      (register 33, bit 0)
+    vesim     : regulator VESIM     (register 33, bit 3)
+    vcam      : regulator VCAM      (register 33, bit 6)
+    vrfbg     : regulator VRFBG     (register 33, bit 9)
+    vvib      : regulator VVIB      (register 33, bit 11)
+    vrf1      : regulator VRF1      (register 33, bit 12)
+    vrf2      : regulator VRF2      (register 33, bit 15)
+    vmmc1     : regulator VMMC1     (register 33, bit 18)
+    vmmc2     : regulator VMMC2     (register 33, bit 21)
+    gpo1      : regulator GPO1      (register 34, bit 6)
+    gpo2      : regulator GPO2      (register 34, bit 8)
+    gpo3      : regulator GPO3      (register 34, bit 10)
+    gpo4      : regulator GPO4      (register 34, bit 12)
+    pwgt1spi  : regulator PWGT1SPI  (register 34, bit 15)
+    pwgt2spi  : regulator PWGT2SPI  (register 34, bit 16)
+
+MC13892 regulators:
     vcoincell : regulator VCOINCELL (register 13, bit 23)
     sw1       : regulator SW1       (register 24, bit 0)
     sw2       : regulator SW2       (register 25, bit 0)
diff --git a/Documentation/devicetree/bindings/misc/sram.txt b/Documentation/devicetree/bindings/misc/sram.txt
new file mode 100644
index 000000000000..4d0a00e453a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/sram.txt
@@ -0,0 +1,16 @@
+Generic on-chip SRAM
+
+Simple IO memory regions to be managed by the genalloc API.
+
+Required properties:
+
+- compatible : mmio-sram
+
+- reg : SRAM iomem address range
+
+Example:
+
+sram: sram@5c000000 {
+        compatible = "mmio-sram";
+        reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */
+};
diff --git a/Documentation/devicetree/bindings/mmc/davinci_mmc.txt b/Documentation/devicetree/bindings/mmc/davinci_mmc.txt
new file mode 100644
index 000000000000..e5a0140b2381
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/davinci_mmc.txt
@@ -0,0 +1,33 @@
+* TI Highspeed MMC host controller for DaVinci
+
+The Highspeed MMC Host Controller on TI DaVinci family
+provides an interface for MMC, SD and SDIO types of memory cards.
+
+This file documents the properties used by the davinci_mmc driver.
+
+Required properties:
+- compatible:
+ Should be "ti,da830-mmc": for da830, da850, dm365
+ Should be "ti,dm355-mmc": for dm355, dm644x
+
+Optional properties:
+- bus-width: Number of data lines, can be <1>, <4>, or <8>, default <1>
+- max-frequency: Maximum operating clock frequency, default 25MHz.
+- dmas: List of DMA specifiers with the controller specific format
+        as described in the generic DMA client binding. A tx and rx
+        specifier is required.
+- dma-names: RX and TX  DMA request names. These strings correspond
+        1:1 with the DMA specifiers listed in dmas.
+
+Example:
+mmc0: mmc@1c40000 {
+        compatible = "ti,da830-mmc",
+        reg = <0x40000 0x1000>;
+        interrupts = <16>;
+        status = "okay";
+        bus-width = <4>;
+        max-frequency = <50000000>;
+        dmas = <&edma 16
+                &edma 17>;
+        dma-names = "rx", "tx";
+};
diff --git a/Documentation/devicetree/bindings/net/can/atmel-can.txt b/Documentation/devicetree/bindings/net/can/atmel-can.txt
new file mode 100644
index 000000000000..72cf0c5daff4
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/atmel-can.txt
@@ -0,0 +1,14 @@
+* AT91 CAN *
+
+Required properties:
+  - compatible: Should be "atmel,at91sam9263-can" or "atmel,at91sam9x5-can"
+  - reg: Should contain CAN controller registers location and length
+  - interrupts: Should contain IRQ line for the CAN controller
+
+Example:
+
+        can0: can@f000c000 {
+                compatbile = "atmel,at91sam9x5-can";
+                reg = <0xf000c000 0x300>;
+                interrupts = <40 4 5>
+        };
diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index ecfdf756d10f..4f2ca6b4a182 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -15,16 +15,22 @@ Required properties:
 - mac_control           : Specifies Default MAC control register content
                           for the specific platform
 - slaves                : Specifies number for slaves
-- cpts_active_slave     : Specifies the slave to use for time stamping
+- active_slave          : Specifies the slave to use for time stamping,
+                          ethtool and SIOCGMIIPHY
 - cpts_clock_mult       : Numerator to convert input clock ticks into nanoseconds
 - cpts_clock_shift      : Denominator to convert input clock ticks into nanoseconds
-- phy_id                : Specifies slave phy id
-- mac-address           : Specifies slave MAC address
 
 Optional properties:
 - ti,hwmods             : Must be "cpgmac0"
 - no_bd_ram             : Must be 0 or 1
 - dual_emac             : Specifies Switch to act as Dual EMAC
+
+Slave Properties:
+Required properties:
+- phy_id                : Specifies slave phy id
+- mac-address           : Specifies slave MAC address
+
+Optional properties:
 - dual_emac_res_vlan    : Specifies VID to be used to segregate the ports
 
 Note: "ti,hwmods" field is used to fetch the base address and irq
@@ -47,7 +53,7 @@ Examples:
                 rx_descs = <64>;
                 mac_control = <0x20>;
                 slaves = <2>;
-                cpts_active_slave = <0>;
+                active_slave = <0>;
                 cpts_clock_mult = <0x80000000>;
                 cpts_clock_shift = <29>;
                 cpsw_emac0: slave@0 {
@@ -73,7 +79,7 @@ Examples:
                 rx_descs = <64>;
                 mac_control = <0x20>;
                 slaves = <2>;
-                cpts_active_slave = <0>;
+                active_slave = <0>;
                 cpts_clock_mult = <0x80000000>;
                 cpts_clock_shift = <29>;
                 cpsw_emac0: slave@0 {
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt
new file mode 100644
index 000000000000..49f4f7ae3f51
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt
@@ -0,0 +1,91 @@
+Marvell Distributed Switch Architecture Device Tree Bindings
+------------------------------------------------------------
+
+Required properties:
+- compatible            : Should be "marvell,dsa"
+- #address-cells        : Must be 2, first cell is the address on the MDIO bus
+                          and second cell is the address in the switch tree.
+                          Second cell is used only when cascading/chaining.
+- #size-cells           : Must be 0
+- dsa,ethernet          : Should be a phandle to a valid Ethernet device node
+- dsa,mii-bus           : Should be a phandle to a valid MDIO bus device node
+
+Optionnal properties:
+- interrupts            : property with a value describing the switch
+                          interrupt number (not supported by the driver)
+
+A DSA node can contain multiple switch chips which are therefore child nodes of
+the parent DSA node. The maximum number of allowed child nodes is 4
+(DSA_MAX_SWITCHES).
+Each of these switch child nodes should have the following required properties:
+
+- reg                   : Describes the switch address on the MII bus
+- #address-cells        : Must be 1
+- #size-cells           : Must be 0
+
+A switch may have multiple "port" children nodes
+
+Each port children node must have the following mandatory properties:
+- reg                   : Describes the port address in the switch
+- label                 : Describes the label associated with this port, special
+                          labels are "cpu" to indicate a CPU port and "dsa" to
+                          indicate an uplink/downlink port.
+
+Note that a port labelled "dsa" will imply checking for the uplink phandle
+described below.
+
+Optionnal property:
+- link                  : Should be a phandle to another switch's DSA port.
+                          This property is only used when switches are being
+                          chained/cascaded together.
+
+Example:
+
+        dsa@0 {
+                compatible = "marvell,dsa";
+                #address-cells = <2>;
+                #size-cells = <0>;
+
+                interrupts = <10>;
+                dsa,ethernet = <&ethernet0>;
+                dsa,mii-bus = <&mii_bus0>;
+
+                switch@0 {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        reg = <16 0>;   /* MDIO address 16, switch 0 in tree */
+
+                        port@0 {
+                                reg = <0>;
+                                label = "lan1";
+                        };
+
+                        port@1 {
+                                reg = <1>;
+                                label = "lan2";
+                        };
+
+                        port@5 {
+                                reg = <5>;
+                                label = "cpu";
+                        };
+
+                        switch0uplink: port@6 {
+                                reg = <6>;
+                                label = "dsa";
+                                link = <&switch1uplink>;
+                        };
+                };
+
+                switch@1 {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        reg = <17 1>;   /* MDIO address 17, switch 1 in tree */
+
+                        switch1uplink: port@0 {
+                                reg = <0>;
+                                label = "dsa";
+                                link = <&switch0uplink>;
+                        };
+                };
+        };
diff --git a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt
index 34e7aafa321c..9417e54c26c0 100644
--- a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt
+++ b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt
@@ -9,6 +9,10 @@ Required properties:
 - compatible: "marvell,orion-mdio"
 - reg: address and length of the SMI register
 
+Optional properties:
+- interrupts: interrupt line number for the SMI error/done interrupt
+- clocks: Phandle to the clock control device and gate bit
+
 The child nodes of the MDIO driver are the individual PHY devices
 connected to this MDIO bus. They must have a "reg" property given the
 PHY address on the MDIO bus.
diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
index bc50899e0c81..648d60eb9fd8 100644
--- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
@@ -1,6 +1,6 @@
 * Atmel AT91 Pinmux Controller
 
-The AT91 Pinmux Controler, enables the IC
+The AT91 Pinmux Controller, enables the IC
 to share one PAD to several functional blocks. The sharing is done by
 multiplexing the PAD input/output signals. For each PAD there are up to
 8 muxing options (called periph modes). Since different modules require
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
index 8edc20e1b09e..2569866c692f 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
@@ -5,7 +5,7 @@ controller, and pinmux/control device.
 
 Required properties:
 - compatible: "brcm,bcm2835-gpio"
-- reg: Should contain the physical address of the GPIO module's registes.
+- reg: Should contain the physical address of the GPIO module's registers.
 - gpio-controller: Marks the device node as a GPIO controller.
 - #gpio-cells : Should be two. The first cell is the pin number and the
   second cell is used to specify optional parameters:
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
index ab19e6bc7d3b..bcfdab5d442e 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
@@ -24,9 +24,9 @@ Required properties for iomux controller:
 Required properties for pin configuration node:
 - fsl,pins: two integers array, represents a group of pins mux and config
   setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
-  pin working on a specific function, CONFIG is the pad setting value like
-  pull-up on this pin. Please refer to fsl,<soc>-pinctrl.txt for the valid
-  pins and functions of each SoC.
+  pin working on a specific function, which consists of a tuple of
+  <mux_reg conf_reg input_reg mux_val input_val>.  CONFIG is the pad setting
+  value like pull-up on this pin.
 
 Bits used for CONFIG:
 NO_PAD_CTL(1 << 31): indicate this pin does not need config.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.txt
index 1183f1a3be33..c083dfd25db9 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.txt
@@ -29,956 +29,5 @@ PAD_CTL_DSE_MAX			(2 << 1)
 PAD_CTL_SRE_FAST                (1 << 0)
 PAD_CTL_SRE_SLOW                (0 << 0)
 
-See below for available PIN_FUNC_ID for imx35:
-0 MX35_PAD_CAPTURE__GPT_CAPIN1
-1 MX35_PAD_CAPTURE__GPT_CMPOUT2
-2 MX35_PAD_CAPTURE__CSPI2_SS1
-3 MX35_PAD_CAPTURE__EPIT1_EPITO
-4 MX35_PAD_CAPTURE__CCM_CLK32K
-5 MX35_PAD_CAPTURE__GPIO1_4
-6 MX35_PAD_COMPARE__GPT_CMPOUT1
-7 MX35_PAD_COMPARE__GPT_CAPIN2
-8 MX35_PAD_COMPARE__GPT_CMPOUT3
-9 MX35_PAD_COMPARE__EPIT2_EPITO
-10 MX35_PAD_COMPARE__GPIO1_5
-11 MX35_PAD_COMPARE__SDMA_EXTDMA_2
-12 MX35_PAD_WDOG_RST__WDOG_WDOG_B
-13 MX35_PAD_WDOG_RST__IPU_FLASH_STROBE
-14 MX35_PAD_WDOG_RST__GPIO1_6
-15 MX35_PAD_GPIO1_0__GPIO1_0
-16 MX35_PAD_GPIO1_0__CCM_PMIC_RDY
-17 MX35_PAD_GPIO1_0__OWIRE_LINE
-18 MX35_PAD_GPIO1_0__SDMA_EXTDMA_0
-19 MX35_PAD_GPIO1_1__GPIO1_1
-20 MX35_PAD_GPIO1_1__PWM_PWMO
-21 MX35_PAD_GPIO1_1__CSPI1_SS2
-22 MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT
-23 MX35_PAD_GPIO1_1__SDMA_EXTDMA_1
-24 MX35_PAD_GPIO2_0__GPIO2_0
-25 MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK
-26 MX35_PAD_GPIO3_0__GPIO3_0
-27 MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK
-28 MX35_PAD_RESET_IN_B__CCM_RESET_IN_B
-29 MX35_PAD_POR_B__CCM_POR_B
-30 MX35_PAD_CLKO__CCM_CLKO
-31 MX35_PAD_CLKO__GPIO1_8
-32 MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0
-33 MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1
-34 MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0
-35 MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1
-36 MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26
-37 MX35_PAD_VSTBY__CCM_VSTBY
-38 MX35_PAD_VSTBY__GPIO1_7
-39 MX35_PAD_A0__EMI_EIM_DA_L_0
-40 MX35_PAD_A1__EMI_EIM_DA_L_1
-41 MX35_PAD_A2__EMI_EIM_DA_L_2
-42 MX35_PAD_A3__EMI_EIM_DA_L_3
-43 MX35_PAD_A4__EMI_EIM_DA_L_4
-44 MX35_PAD_A5__EMI_EIM_DA_L_5
-45 MX35_PAD_A6__EMI_EIM_DA_L_6
-46 MX35_PAD_A7__EMI_EIM_DA_L_7
-47 MX35_PAD_A8__EMI_EIM_DA_H_8
-48 MX35_PAD_A9__EMI_EIM_DA_H_9
-49 MX35_PAD_A10__EMI_EIM_DA_H_10
-50 MX35_PAD_MA10__EMI_MA10
-51 MX35_PAD_A11__EMI_EIM_DA_H_11
-52 MX35_PAD_A12__EMI_EIM_DA_H_12
-53 MX35_PAD_A13__EMI_EIM_DA_H_13
-54 MX35_PAD_A14__EMI_EIM_DA_H2_14
-55 MX35_PAD_A15__EMI_EIM_DA_H2_15
-56 MX35_PAD_A16__EMI_EIM_A_16
-57 MX35_PAD_A17__EMI_EIM_A_17
-58 MX35_PAD_A18__EMI_EIM_A_18
-59 MX35_PAD_A19__EMI_EIM_A_19
-60 MX35_PAD_A20__EMI_EIM_A_20
-61 MX35_PAD_A21__EMI_EIM_A_21
-62 MX35_PAD_A22__EMI_EIM_A_22
-63 MX35_PAD_A23__EMI_EIM_A_23
-64 MX35_PAD_A24__EMI_EIM_A_24
-65 MX35_PAD_A25__EMI_EIM_A_25
-66 MX35_PAD_SDBA1__EMI_EIM_SDBA1
-67 MX35_PAD_SDBA0__EMI_EIM_SDBA0
-68 MX35_PAD_SD0__EMI_DRAM_D_0
-69 MX35_PAD_SD1__EMI_DRAM_D_1
-70 MX35_PAD_SD2__EMI_DRAM_D_2
-71 MX35_PAD_SD3__EMI_DRAM_D_3
-72 MX35_PAD_SD4__EMI_DRAM_D_4
-73 MX35_PAD_SD5__EMI_DRAM_D_5
-74 MX35_PAD_SD6__EMI_DRAM_D_6
-75 MX35_PAD_SD7__EMI_DRAM_D_7
-76 MX35_PAD_SD8__EMI_DRAM_D_8
-77 MX35_PAD_SD9__EMI_DRAM_D_9
-78 MX35_PAD_SD10__EMI_DRAM_D_10
-79 MX35_PAD_SD11__EMI_DRAM_D_11
-80 MX35_PAD_SD12__EMI_DRAM_D_12
-81 MX35_PAD_SD13__EMI_DRAM_D_13
-82 MX35_PAD_SD14__EMI_DRAM_D_14
-83 MX35_PAD_SD15__EMI_DRAM_D_15
-84 MX35_PAD_SD16__EMI_DRAM_D_16
-85 MX35_PAD_SD17__EMI_DRAM_D_17
-86 MX35_PAD_SD18__EMI_DRAM_D_18
-87 MX35_PAD_SD19__EMI_DRAM_D_19
-88 MX35_PAD_SD20__EMI_DRAM_D_20
-89 MX35_PAD_SD21__EMI_DRAM_D_21
-90 MX35_PAD_SD22__EMI_DRAM_D_22
-91 MX35_PAD_SD23__EMI_DRAM_D_23
-92 MX35_PAD_SD24__EMI_DRAM_D_24
-93 MX35_PAD_SD25__EMI_DRAM_D_25
-94 MX35_PAD_SD26__EMI_DRAM_D_26
-95 MX35_PAD_SD27__EMI_DRAM_D_27
-96 MX35_PAD_SD28__EMI_DRAM_D_28
-97 MX35_PAD_SD29__EMI_DRAM_D_29
-98 MX35_PAD_SD30__EMI_DRAM_D_30
-99 MX35_PAD_SD31__EMI_DRAM_D_31
-100 MX35_PAD_DQM0__EMI_DRAM_DQM_0
-101 MX35_PAD_DQM1__EMI_DRAM_DQM_1
-102 MX35_PAD_DQM2__EMI_DRAM_DQM_2
-103 MX35_PAD_DQM3__EMI_DRAM_DQM_3
-104 MX35_PAD_EB0__EMI_EIM_EB0_B
-105 MX35_PAD_EB1__EMI_EIM_EB1_B
-106 MX35_PAD_OE__EMI_EIM_OE
-107 MX35_PAD_CS0__EMI_EIM_CS0
-108 MX35_PAD_CS1__EMI_EIM_CS1
-109 MX35_PAD_CS1__EMI_NANDF_CE3
-110 MX35_PAD_CS2__EMI_EIM_CS2
-111 MX35_PAD_CS3__EMI_EIM_CS3
-112 MX35_PAD_CS4__EMI_EIM_CS4
-113 MX35_PAD_CS4__EMI_DTACK_B
-114 MX35_PAD_CS4__EMI_NANDF_CE1
-115 MX35_PAD_CS4__GPIO1_20
-116 MX35_PAD_CS5__EMI_EIM_CS5
-117 MX35_PAD_CS5__CSPI2_SS2
-118 MX35_PAD_CS5__CSPI1_SS2
-119 MX35_PAD_CS5__EMI_NANDF_CE2
-120 MX35_PAD_CS5__GPIO1_21
-121 MX35_PAD_NF_CE0__EMI_NANDF_CE0
-122 MX35_PAD_NF_CE0__GPIO1_22
-123 MX35_PAD_ECB__EMI_EIM_ECB
-124 MX35_PAD_LBA__EMI_EIM_LBA
-125 MX35_PAD_BCLK__EMI_EIM_BCLK
-126 MX35_PAD_RW__EMI_EIM_RW
-127 MX35_PAD_RAS__EMI_DRAM_RAS
-128 MX35_PAD_CAS__EMI_DRAM_CAS
-129 MX35_PAD_SDWE__EMI_DRAM_SDWE
-130 MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0
-131 MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1
-132 MX35_PAD_SDCLK__EMI_DRAM_SDCLK
-133 MX35_PAD_SDQS0__EMI_DRAM_SDQS_0
-134 MX35_PAD_SDQS1__EMI_DRAM_SDQS_1
-135 MX35_PAD_SDQS2__EMI_DRAM_SDQS_2
-136 MX35_PAD_SDQS3__EMI_DRAM_SDQS_3
-137 MX35_PAD_NFWE_B__EMI_NANDF_WE_B
-138 MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3
-139 MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC
-140 MX35_PAD_NFWE_B__GPIO2_18
-141 MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0
-142 MX35_PAD_NFRE_B__EMI_NANDF_RE_B
-143 MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR
-144 MX35_PAD_NFRE_B__IPU_DISPB_BCLK
-145 MX35_PAD_NFRE_B__GPIO2_19
-146 MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1
-147 MX35_PAD_NFALE__EMI_NANDF_ALE
-148 MX35_PAD_NFALE__USB_TOP_USBH2_STP
-149 MX35_PAD_NFALE__IPU_DISPB_CS0
-150 MX35_PAD_NFALE__GPIO2_20
-151 MX35_PAD_NFALE__ARM11P_TOP_TRACE_2
-152 MX35_PAD_NFCLE__EMI_NANDF_CLE
-153 MX35_PAD_NFCLE__USB_TOP_USBH2_NXT
-154 MX35_PAD_NFCLE__IPU_DISPB_PAR_RS
-155 MX35_PAD_NFCLE__GPIO2_21
-156 MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3
-157 MX35_PAD_NFWP_B__EMI_NANDF_WP_B
-158 MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7
-159 MX35_PAD_NFWP_B__IPU_DISPB_WR
-160 MX35_PAD_NFWP_B__GPIO2_22
-161 MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL
-162 MX35_PAD_NFRB__EMI_NANDF_RB
-163 MX35_PAD_NFRB__IPU_DISPB_RD
-164 MX35_PAD_NFRB__GPIO2_23
-165 MX35_PAD_NFRB__ARM11P_TOP_TRCLK
-166 MX35_PAD_D15__EMI_EIM_D_15
-167 MX35_PAD_D14__EMI_EIM_D_14
-168 MX35_PAD_D13__EMI_EIM_D_13
-169 MX35_PAD_D12__EMI_EIM_D_12
-170 MX35_PAD_D11__EMI_EIM_D_11
-171 MX35_PAD_D10__EMI_EIM_D_10
-172 MX35_PAD_D9__EMI_EIM_D_9
-173 MX35_PAD_D8__EMI_EIM_D_8
-174 MX35_PAD_D7__EMI_EIM_D_7
-175 MX35_PAD_D6__EMI_EIM_D_6
-176 MX35_PAD_D5__EMI_EIM_D_5
-177 MX35_PAD_D4__EMI_EIM_D_4
-178 MX35_PAD_D3__EMI_EIM_D_3
-179 MX35_PAD_D2__EMI_EIM_D_2
-180 MX35_PAD_D1__EMI_EIM_D_1
-181 MX35_PAD_D0__EMI_EIM_D_0
-182 MX35_PAD_CSI_D8__IPU_CSI_D_8
-183 MX35_PAD_CSI_D8__KPP_COL_0
-184 MX35_PAD_CSI_D8__GPIO1_20
-185 MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13
-186 MX35_PAD_CSI_D9__IPU_CSI_D_9
-187 MX35_PAD_CSI_D9__KPP_COL_1
-188 MX35_PAD_CSI_D9__GPIO1_21
-189 MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14
-190 MX35_PAD_CSI_D10__IPU_CSI_D_10
-191 MX35_PAD_CSI_D10__KPP_COL_2
-192 MX35_PAD_CSI_D10__GPIO1_22
-193 MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15
-194 MX35_PAD_CSI_D11__IPU_CSI_D_11
-195 MX35_PAD_CSI_D11__KPP_COL_3
-196 MX35_PAD_CSI_D11__GPIO1_23
-197 MX35_PAD_CSI_D12__IPU_CSI_D_12
-198 MX35_PAD_CSI_D12__KPP_ROW_0
-199 MX35_PAD_CSI_D12__GPIO1_24
-200 MX35_PAD_CSI_D13__IPU_CSI_D_13
-201 MX35_PAD_CSI_D13__KPP_ROW_1
-202 MX35_PAD_CSI_D13__GPIO1_25
-203 MX35_PAD_CSI_D14__IPU_CSI_D_14
-204 MX35_PAD_CSI_D14__KPP_ROW_2
-205 MX35_PAD_CSI_D14__GPIO1_26
-206 MX35_PAD_CSI_D15__IPU_CSI_D_15
-207 MX35_PAD_CSI_D15__KPP_ROW_3
-208 MX35_PAD_CSI_D15__GPIO1_27
-209 MX35_PAD_CSI_MCLK__IPU_CSI_MCLK
-210 MX35_PAD_CSI_MCLK__GPIO1_28
-211 MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC
-212 MX35_PAD_CSI_VSYNC__GPIO1_29
-213 MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC
-214 MX35_PAD_CSI_HSYNC__GPIO1_30
-215 MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK
-216 MX35_PAD_CSI_PIXCLK__GPIO1_31
-217 MX35_PAD_I2C1_CLK__I2C1_SCL
-218 MX35_PAD_I2C1_CLK__GPIO2_24
-219 MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK
-220 MX35_PAD_I2C1_DAT__I2C1_SDA
-221 MX35_PAD_I2C1_DAT__GPIO2_25
-222 MX35_PAD_I2C2_CLK__I2C2_SCL
-223 MX35_PAD_I2C2_CLK__CAN1_TXCAN
-224 MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR
-225 MX35_PAD_I2C2_CLK__GPIO2_26
-226 MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2
-227 MX35_PAD_I2C2_DAT__I2C2_SDA
-228 MX35_PAD_I2C2_DAT__CAN1_RXCAN
-229 MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC
-230 MX35_PAD_I2C2_DAT__GPIO2_27
-231 MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3
-232 MX35_PAD_STXD4__AUDMUX_AUD4_TXD
-233 MX35_PAD_STXD4__GPIO2_28
-234 MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0
-235 MX35_PAD_SRXD4__AUDMUX_AUD4_RXD
-236 MX35_PAD_SRXD4__GPIO2_29
-237 MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1
-238 MX35_PAD_SCK4__AUDMUX_AUD4_TXC
-239 MX35_PAD_SCK4__GPIO2_30
-240 MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2
-241 MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS
-242 MX35_PAD_STXFS4__GPIO2_31
-243 MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3
-244 MX35_PAD_STXD5__AUDMUX_AUD5_TXD
-245 MX35_PAD_STXD5__SPDIF_SPDIF_OUT1
-246 MX35_PAD_STXD5__CSPI2_MOSI
-247 MX35_PAD_STXD5__GPIO1_0
-248 MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4
-249 MX35_PAD_SRXD5__AUDMUX_AUD5_RXD
-250 MX35_PAD_SRXD5__SPDIF_SPDIF_IN1
-251 MX35_PAD_SRXD5__CSPI2_MISO
-252 MX35_PAD_SRXD5__GPIO1_1
-253 MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5
-254 MX35_PAD_SCK5__AUDMUX_AUD5_TXC
-255 MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK
-256 MX35_PAD_SCK5__CSPI2_SCLK
-257 MX35_PAD_SCK5__GPIO1_2
-258 MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6
-259 MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS
-260 MX35_PAD_STXFS5__CSPI2_RDY
-261 MX35_PAD_STXFS5__GPIO1_3
-262 MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7
-263 MX35_PAD_SCKR__ESAI_SCKR
-264 MX35_PAD_SCKR__GPIO1_4
-265 MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10
-266 MX35_PAD_FSR__ESAI_FSR
-267 MX35_PAD_FSR__GPIO1_5
-268 MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11
-269 MX35_PAD_HCKR__ESAI_HCKR
-270 MX35_PAD_HCKR__AUDMUX_AUD5_RXFS
-271 MX35_PAD_HCKR__CSPI2_SS0
-272 MX35_PAD_HCKR__IPU_FLASH_STROBE
-273 MX35_PAD_HCKR__GPIO1_6
-274 MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12
-275 MX35_PAD_SCKT__ESAI_SCKT
-276 MX35_PAD_SCKT__GPIO1_7
-277 MX35_PAD_SCKT__IPU_CSI_D_0
-278 MX35_PAD_SCKT__KPP_ROW_2
-279 MX35_PAD_FST__ESAI_FST
-280 MX35_PAD_FST__GPIO1_8
-281 MX35_PAD_FST__IPU_CSI_D_1
-282 MX35_PAD_FST__KPP_ROW_3
-283 MX35_PAD_HCKT__ESAI_HCKT
-284 MX35_PAD_HCKT__AUDMUX_AUD5_RXC
-285 MX35_PAD_HCKT__GPIO1_9
-286 MX35_PAD_HCKT__IPU_CSI_D_2
-287 MX35_PAD_HCKT__KPP_COL_3
-288 MX35_PAD_TX5_RX0__ESAI_TX5_RX0
-289 MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC
-290 MX35_PAD_TX5_RX0__CSPI2_SS2
-291 MX35_PAD_TX5_RX0__CAN2_TXCAN
-292 MX35_PAD_TX5_RX0__UART2_DTR
-293 MX35_PAD_TX5_RX0__GPIO1_10
-294 MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0
-295 MX35_PAD_TX4_RX1__ESAI_TX4_RX1
-296 MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS
-297 MX35_PAD_TX4_RX1__CSPI2_SS3
-298 MX35_PAD_TX4_RX1__CAN2_RXCAN
-299 MX35_PAD_TX4_RX1__UART2_DSR
-300 MX35_PAD_TX4_RX1__GPIO1_11
-301 MX35_PAD_TX4_RX1__IPU_CSI_D_3
-302 MX35_PAD_TX4_RX1__KPP_ROW_0
-303 MX35_PAD_TX3_RX2__ESAI_TX3_RX2
-304 MX35_PAD_TX3_RX2__I2C3_SCL
-305 MX35_PAD_TX3_RX2__EMI_NANDF_CE1
-306 MX35_PAD_TX3_RX2__GPIO1_12
-307 MX35_PAD_TX3_RX2__IPU_CSI_D_4
-308 MX35_PAD_TX3_RX2__KPP_ROW_1
-309 MX35_PAD_TX2_RX3__ESAI_TX2_RX3
-310 MX35_PAD_TX2_RX3__I2C3_SDA
-311 MX35_PAD_TX2_RX3__EMI_NANDF_CE2
-312 MX35_PAD_TX2_RX3__GPIO1_13
-313 MX35_PAD_TX2_RX3__IPU_CSI_D_5
-314 MX35_PAD_TX2_RX3__KPP_COL_0
-315 MX35_PAD_TX1__ESAI_TX1
-316 MX35_PAD_TX1__CCM_PMIC_RDY
-317 MX35_PAD_TX1__CSPI1_SS2
-318 MX35_PAD_TX1__EMI_NANDF_CE3
-319 MX35_PAD_TX1__UART2_RI
-320 MX35_PAD_TX1__GPIO1_14
-321 MX35_PAD_TX1__IPU_CSI_D_6
-322 MX35_PAD_TX1__KPP_COL_1
-323 MX35_PAD_TX0__ESAI_TX0
-324 MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK
-325 MX35_PAD_TX0__CSPI1_SS3
-326 MX35_PAD_TX0__EMI_DTACK_B
-327 MX35_PAD_TX0__UART2_DCD
-328 MX35_PAD_TX0__GPIO1_15
-329 MX35_PAD_TX0__IPU_CSI_D_7
-330 MX35_PAD_TX0__KPP_COL_2
-331 MX35_PAD_CSPI1_MOSI__CSPI1_MOSI
-332 MX35_PAD_CSPI1_MOSI__GPIO1_16
-333 MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2
-334 MX35_PAD_CSPI1_MISO__CSPI1_MISO
-335 MX35_PAD_CSPI1_MISO__GPIO1_17
-336 MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3
-337 MX35_PAD_CSPI1_SS0__CSPI1_SS0
-338 MX35_PAD_CSPI1_SS0__OWIRE_LINE
-339 MX35_PAD_CSPI1_SS0__CSPI2_SS3
-340 MX35_PAD_CSPI1_SS0__GPIO1_18
-341 MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4
-342 MX35_PAD_CSPI1_SS1__CSPI1_SS1
-343 MX35_PAD_CSPI1_SS1__PWM_PWMO
-344 MX35_PAD_CSPI1_SS1__CCM_CLK32K
-345 MX35_PAD_CSPI1_SS1__GPIO1_19
-346 MX35_PAD_CSPI1_SS1__IPU_DIAGB_29
-347 MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5
-348 MX35_PAD_CSPI1_SCLK__CSPI1_SCLK
-349 MX35_PAD_CSPI1_SCLK__GPIO3_4
-350 MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30
-351 MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1
-352 MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY
-353 MX35_PAD_CSPI1_SPI_RDY__GPIO3_5
-354 MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31
-355 MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2
-356 MX35_PAD_RXD1__UART1_RXD_MUX
-357 MX35_PAD_RXD1__CSPI2_MOSI
-358 MX35_PAD_RXD1__KPP_COL_4
-359 MX35_PAD_RXD1__GPIO3_6
-360 MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16
-361 MX35_PAD_TXD1__UART1_TXD_MUX
-362 MX35_PAD_TXD1__CSPI2_MISO
-363 MX35_PAD_TXD1__KPP_COL_5
-364 MX35_PAD_TXD1__GPIO3_7
-365 MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17
-366 MX35_PAD_RTS1__UART1_RTS
-367 MX35_PAD_RTS1__CSPI2_SCLK
-368 MX35_PAD_RTS1__I2C3_SCL
-369 MX35_PAD_RTS1__IPU_CSI_D_0
-370 MX35_PAD_RTS1__KPP_COL_6
-371 MX35_PAD_RTS1__GPIO3_8
-372 MX35_PAD_RTS1__EMI_NANDF_CE1
-373 MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18
-374 MX35_PAD_CTS1__UART1_CTS
-375 MX35_PAD_CTS1__CSPI2_RDY
-376 MX35_PAD_CTS1__I2C3_SDA
-377 MX35_PAD_CTS1__IPU_CSI_D_1
-378 MX35_PAD_CTS1__KPP_COL_7
-379 MX35_PAD_CTS1__GPIO3_9
-380 MX35_PAD_CTS1__EMI_NANDF_CE2
-381 MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19
-382 MX35_PAD_RXD2__UART2_RXD_MUX
-383 MX35_PAD_RXD2__KPP_ROW_4
-384 MX35_PAD_RXD2__GPIO3_10
-385 MX35_PAD_TXD2__UART2_TXD_MUX
-386 MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK
-387 MX35_PAD_TXD2__KPP_ROW_5
-388 MX35_PAD_TXD2__GPIO3_11
-389 MX35_PAD_RTS2__UART2_RTS
-390 MX35_PAD_RTS2__SPDIF_SPDIF_IN1
-391 MX35_PAD_RTS2__CAN2_RXCAN
-392 MX35_PAD_RTS2__IPU_CSI_D_2
-393 MX35_PAD_RTS2__KPP_ROW_6
-394 MX35_PAD_RTS2__GPIO3_12
-395 MX35_PAD_RTS2__AUDMUX_AUD5_RXC
-396 MX35_PAD_RTS2__UART3_RXD_MUX
-397 MX35_PAD_CTS2__UART2_CTS
-398 MX35_PAD_CTS2__SPDIF_SPDIF_OUT1
-399 MX35_PAD_CTS2__CAN2_TXCAN
-400 MX35_PAD_CTS2__IPU_CSI_D_3
-401 MX35_PAD_CTS2__KPP_ROW_7
-402 MX35_PAD_CTS2__GPIO3_13
-403 MX35_PAD_CTS2__AUDMUX_AUD5_RXFS
-404 MX35_PAD_CTS2__UART3_TXD_MUX
-405 MX35_PAD_RTCK__ARM11P_TOP_RTCK
-406 MX35_PAD_TCK__SJC_TCK
-407 MX35_PAD_TMS__SJC_TMS
-408 MX35_PAD_TDI__SJC_TDI
-409 MX35_PAD_TDO__SJC_TDO
-410 MX35_PAD_TRSTB__SJC_TRSTB
-411 MX35_PAD_DE_B__SJC_DE_B
-412 MX35_PAD_SJC_MOD__SJC_MOD
-413 MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR
-414 MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR
-415 MX35_PAD_USBOTG_PWR__GPIO3_14
-416 MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC
-417 MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC
-418 MX35_PAD_USBOTG_OC__GPIO3_15
-419 MX35_PAD_LD0__IPU_DISPB_DAT_0
-420 MX35_PAD_LD0__GPIO2_0
-421 MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0
-422 MX35_PAD_LD1__IPU_DISPB_DAT_1
-423 MX35_PAD_LD1__GPIO2_1
-424 MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1
-425 MX35_PAD_LD2__IPU_DISPB_DAT_2
-426 MX35_PAD_LD2__GPIO2_2
-427 MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2
-428 MX35_PAD_LD3__IPU_DISPB_DAT_3
-429 MX35_PAD_LD3__GPIO2_3
-430 MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3
-431 MX35_PAD_LD4__IPU_DISPB_DAT_4
-432 MX35_PAD_LD4__GPIO2_4
-433 MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4
-434 MX35_PAD_LD5__IPU_DISPB_DAT_5
-435 MX35_PAD_LD5__GPIO2_5
-436 MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5
-437 MX35_PAD_LD6__IPU_DISPB_DAT_6
-438 MX35_PAD_LD6__GPIO2_6
-439 MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6
-440 MX35_PAD_LD7__IPU_DISPB_DAT_7
-441 MX35_PAD_LD7__GPIO2_7
-442 MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7
-443 MX35_PAD_LD8__IPU_DISPB_DAT_8
-444 MX35_PAD_LD8__GPIO2_8
-445 MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8
-446 MX35_PAD_LD9__IPU_DISPB_DAT_9
-447 MX35_PAD_LD9__GPIO2_9
-448 MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9
-449 MX35_PAD_LD10__IPU_DISPB_DAT_10
-450 MX35_PAD_LD10__GPIO2_10
-451 MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10
-452 MX35_PAD_LD11__IPU_DISPB_DAT_11
-453 MX35_PAD_LD11__GPIO2_11
-454 MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11
-455 MX35_PAD_LD11__ARM11P_TOP_TRACE_4
-456 MX35_PAD_LD12__IPU_DISPB_DAT_12
-457 MX35_PAD_LD12__GPIO2_12
-458 MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12
-459 MX35_PAD_LD12__ARM11P_TOP_TRACE_5
-460 MX35_PAD_LD13__IPU_DISPB_DAT_13
-461 MX35_PAD_LD13__GPIO2_13
-462 MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13
-463 MX35_PAD_LD13__ARM11P_TOP_TRACE_6
-464 MX35_PAD_LD14__IPU_DISPB_DAT_14
-465 MX35_PAD_LD14__GPIO2_14
-466 MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0
-467 MX35_PAD_LD14__ARM11P_TOP_TRACE_7
-468 MX35_PAD_LD15__IPU_DISPB_DAT_15
-469 MX35_PAD_LD15__GPIO2_15
-470 MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1
-471 MX35_PAD_LD15__ARM11P_TOP_TRACE_8
-472 MX35_PAD_LD16__IPU_DISPB_DAT_16
-473 MX35_PAD_LD16__IPU_DISPB_D12_VSYNC
-474 MX35_PAD_LD16__GPIO2_16
-475 MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2
-476 MX35_PAD_LD16__ARM11P_TOP_TRACE_9
-477 MX35_PAD_LD17__IPU_DISPB_DAT_17
-478 MX35_PAD_LD17__IPU_DISPB_CS2
-479 MX35_PAD_LD17__GPIO2_17
-480 MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3
-481 MX35_PAD_LD17__ARM11P_TOP_TRACE_10
-482 MX35_PAD_LD18__IPU_DISPB_DAT_18
-483 MX35_PAD_LD18__IPU_DISPB_D0_VSYNC
-484 MX35_PAD_LD18__IPU_DISPB_D12_VSYNC
-485 MX35_PAD_LD18__ESDHC3_CMD
-486 MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3
-487 MX35_PAD_LD18__GPIO3_24
-488 MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4
-489 MX35_PAD_LD18__ARM11P_TOP_TRACE_11
-490 MX35_PAD_LD19__IPU_DISPB_DAT_19
-491 MX35_PAD_LD19__IPU_DISPB_BCLK
-492 MX35_PAD_LD19__IPU_DISPB_CS1
-493 MX35_PAD_LD19__ESDHC3_CLK
-494 MX35_PAD_LD19__USB_TOP_USBOTG_DIR
-495 MX35_PAD_LD19__GPIO3_25
-496 MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5
-497 MX35_PAD_LD19__ARM11P_TOP_TRACE_12
-498 MX35_PAD_LD20__IPU_DISPB_DAT_20
-499 MX35_PAD_LD20__IPU_DISPB_CS0
-500 MX35_PAD_LD20__IPU_DISPB_SD_CLK
-501 MX35_PAD_LD20__ESDHC3_DAT0
-502 MX35_PAD_LD20__GPIO3_26
-503 MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3
-504 MX35_PAD_LD20__ARM11P_TOP_TRACE_13
-505 MX35_PAD_LD21__IPU_DISPB_DAT_21
-506 MX35_PAD_LD21__IPU_DISPB_PAR_RS
-507 MX35_PAD_LD21__IPU_DISPB_SER_RS
-508 MX35_PAD_LD21__ESDHC3_DAT1
-509 MX35_PAD_LD21__USB_TOP_USBOTG_STP
-510 MX35_PAD_LD21__GPIO3_27
-511 MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL
-512 MX35_PAD_LD21__ARM11P_TOP_TRACE_14
-513 MX35_PAD_LD22__IPU_DISPB_DAT_22
-514 MX35_PAD_LD22__IPU_DISPB_WR
-515 MX35_PAD_LD22__IPU_DISPB_SD_D_I
-516 MX35_PAD_LD22__ESDHC3_DAT2
-517 MX35_PAD_LD22__USB_TOP_USBOTG_NXT
-518 MX35_PAD_LD22__GPIO3_28
-519 MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR
-520 MX35_PAD_LD22__ARM11P_TOP_TRCTL
-521 MX35_PAD_LD23__IPU_DISPB_DAT_23
-522 MX35_PAD_LD23__IPU_DISPB_RD
-523 MX35_PAD_LD23__IPU_DISPB_SD_D_IO
-524 MX35_PAD_LD23__ESDHC3_DAT3
-525 MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7
-526 MX35_PAD_LD23__GPIO3_29
-527 MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS
-528 MX35_PAD_LD23__ARM11P_TOP_TRCLK
-529 MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC
-530 MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO
-531 MX35_PAD_D3_HSYNC__GPIO3_30
-532 MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE
-533 MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15
-534 MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK
-535 MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK
-536 MX35_PAD_D3_FPSHIFT__GPIO3_31
-537 MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0
-538 MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16
-539 MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY
-540 MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O
-541 MX35_PAD_D3_DRDY__GPIO1_0
-542 MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1
-543 MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17
-544 MX35_PAD_CONTRAST__IPU_DISPB_CONTR
-545 MX35_PAD_CONTRAST__GPIO1_1
-546 MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2
-547 MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18
-548 MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC
-549 MX35_PAD_D3_VSYNC__IPU_DISPB_CS1
-550 MX35_PAD_D3_VSYNC__GPIO1_2
-551 MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD
-552 MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19
-553 MX35_PAD_D3_REV__IPU_DISPB_D3_REV
-554 MX35_PAD_D3_REV__IPU_DISPB_SER_RS
-555 MX35_PAD_D3_REV__GPIO1_3
-556 MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB
-557 MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20
-558 MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS
-559 MX35_PAD_D3_CLS__IPU_DISPB_CS2
-560 MX35_PAD_D3_CLS__GPIO1_4
-561 MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0
-562 MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21
-563 MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL
-564 MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC
-565 MX35_PAD_D3_SPL__GPIO1_5
-566 MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1
-567 MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22
-568 MX35_PAD_SD1_CMD__ESDHC1_CMD
-569 MX35_PAD_SD1_CMD__MSHC_SCLK
-570 MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC
-571 MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4
-572 MX35_PAD_SD1_CMD__GPIO1_6
-573 MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL
-574 MX35_PAD_SD1_CLK__ESDHC1_CLK
-575 MX35_PAD_SD1_CLK__MSHC_BS
-576 MX35_PAD_SD1_CLK__IPU_DISPB_BCLK
-577 MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5
-578 MX35_PAD_SD1_CLK__GPIO1_7
-579 MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK
-580 MX35_PAD_SD1_DATA0__ESDHC1_DAT0
-581 MX35_PAD_SD1_DATA0__MSHC_DATA_0
-582 MX35_PAD_SD1_DATA0__IPU_DISPB_CS0
-583 MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6
-584 MX35_PAD_SD1_DATA0__GPIO1_8
-585 MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23
-586 MX35_PAD_SD1_DATA1__ESDHC1_DAT1
-587 MX35_PAD_SD1_DATA1__MSHC_DATA_1
-588 MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS
-589 MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0
-590 MX35_PAD_SD1_DATA1__GPIO1_9
-591 MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24
-592 MX35_PAD_SD1_DATA2__ESDHC1_DAT2
-593 MX35_PAD_SD1_DATA2__MSHC_DATA_2
-594 MX35_PAD_SD1_DATA2__IPU_DISPB_WR
-595 MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1
-596 MX35_PAD_SD1_DATA2__GPIO1_10
-597 MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25
-598 MX35_PAD_SD1_DATA3__ESDHC1_DAT3
-599 MX35_PAD_SD1_DATA3__MSHC_DATA_3
-600 MX35_PAD_SD1_DATA3__IPU_DISPB_RD
-601 MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2
-602 MX35_PAD_SD1_DATA3__GPIO1_11
-603 MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26
-604 MX35_PAD_SD2_CMD__ESDHC2_CMD
-605 MX35_PAD_SD2_CMD__I2C3_SCL
-606 MX35_PAD_SD2_CMD__ESDHC1_DAT4
-607 MX35_PAD_SD2_CMD__IPU_CSI_D_2
-608 MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4
-609 MX35_PAD_SD2_CMD__GPIO2_0
-610 MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1
-611 MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC
-612 MX35_PAD_SD2_CLK__ESDHC2_CLK
-613 MX35_PAD_SD2_CLK__I2C3_SDA
-614 MX35_PAD_SD2_CLK__ESDHC1_DAT5
-615 MX35_PAD_SD2_CLK__IPU_CSI_D_3
-616 MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5
-617 MX35_PAD_SD2_CLK__GPIO2_1
-618 MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1
-619 MX35_PAD_SD2_CLK__IPU_DISPB_CS2
-620 MX35_PAD_SD2_DATA0__ESDHC2_DAT0
-621 MX35_PAD_SD2_DATA0__UART3_RXD_MUX
-622 MX35_PAD_SD2_DATA0__ESDHC1_DAT6
-623 MX35_PAD_SD2_DATA0__IPU_CSI_D_4
-624 MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6
-625 MX35_PAD_SD2_DATA0__GPIO2_2
-626 MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK
-627 MX35_PAD_SD2_DATA1__ESDHC2_DAT1
-628 MX35_PAD_SD2_DATA1__UART3_TXD_MUX
-629 MX35_PAD_SD2_DATA1__ESDHC1_DAT7
-630 MX35_PAD_SD2_DATA1__IPU_CSI_D_5
-631 MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0
-632 MX35_PAD_SD2_DATA1__GPIO2_3
-633 MX35_PAD_SD2_DATA2__ESDHC2_DAT2
-634 MX35_PAD_SD2_DATA2__UART3_RTS
-635 MX35_PAD_SD2_DATA2__CAN1_RXCAN
-636 MX35_PAD_SD2_DATA2__IPU_CSI_D_6
-637 MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1
-638 MX35_PAD_SD2_DATA2__GPIO2_4
-639 MX35_PAD_SD2_DATA3__ESDHC2_DAT3
-640 MX35_PAD_SD2_DATA3__UART3_CTS
-641 MX35_PAD_SD2_DATA3__CAN1_TXCAN
-642 MX35_PAD_SD2_DATA3__IPU_CSI_D_7
-643 MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2
-644 MX35_PAD_SD2_DATA3__GPIO2_5
-645 MX35_PAD_ATA_CS0__ATA_CS0
-646 MX35_PAD_ATA_CS0__CSPI1_SS3
-647 MX35_PAD_ATA_CS0__IPU_DISPB_CS1
-648 MX35_PAD_ATA_CS0__GPIO2_6
-649 MX35_PAD_ATA_CS0__IPU_DIAGB_0
-650 MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0
-651 MX35_PAD_ATA_CS1__ATA_CS1
-652 MX35_PAD_ATA_CS1__IPU_DISPB_CS2
-653 MX35_PAD_ATA_CS1__CSPI2_SS0
-654 MX35_PAD_ATA_CS1__GPIO2_7
-655 MX35_PAD_ATA_CS1__IPU_DIAGB_1
-656 MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1
-657 MX35_PAD_ATA_DIOR__ATA_DIOR
-658 MX35_PAD_ATA_DIOR__ESDHC3_DAT0
-659 MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR
-660 MX35_PAD_ATA_DIOR__IPU_DISPB_BE0
-661 MX35_PAD_ATA_DIOR__CSPI2_SS1
-662 MX35_PAD_ATA_DIOR__GPIO2_8
-663 MX35_PAD_ATA_DIOR__IPU_DIAGB_2
-664 MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2
-665 MX35_PAD_ATA_DIOW__ATA_DIOW
-666 MX35_PAD_ATA_DIOW__ESDHC3_DAT1
-667 MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP
-668 MX35_PAD_ATA_DIOW__IPU_DISPB_BE1
-669 MX35_PAD_ATA_DIOW__CSPI2_MOSI
-670 MX35_PAD_ATA_DIOW__GPIO2_9
-671 MX35_PAD_ATA_DIOW__IPU_DIAGB_3
-672 MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3
-673 MX35_PAD_ATA_DMACK__ATA_DMACK
-674 MX35_PAD_ATA_DMACK__ESDHC3_DAT2
-675 MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT
-676 MX35_PAD_ATA_DMACK__CSPI2_MISO
-677 MX35_PAD_ATA_DMACK__GPIO2_10
-678 MX35_PAD_ATA_DMACK__IPU_DIAGB_4
-679 MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0
-680 MX35_PAD_ATA_RESET_B__ATA_RESET_B
-681 MX35_PAD_ATA_RESET_B__ESDHC3_DAT3
-682 MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0
-683 MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O
-684 MX35_PAD_ATA_RESET_B__CSPI2_RDY
-685 MX35_PAD_ATA_RESET_B__GPIO2_11
-686 MX35_PAD_ATA_RESET_B__IPU_DIAGB_5
-687 MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1
-688 MX35_PAD_ATA_IORDY__ATA_IORDY
-689 MX35_PAD_ATA_IORDY__ESDHC3_DAT4
-690 MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1
-691 MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO
-692 MX35_PAD_ATA_IORDY__ESDHC2_DAT4
-693 MX35_PAD_ATA_IORDY__GPIO2_12
-694 MX35_PAD_ATA_IORDY__IPU_DIAGB_6
-695 MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2
-696 MX35_PAD_ATA_DATA0__ATA_DATA_0
-697 MX35_PAD_ATA_DATA0__ESDHC3_DAT5
-698 MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2
-699 MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC
-700 MX35_PAD_ATA_DATA0__ESDHC2_DAT5
-701 MX35_PAD_ATA_DATA0__GPIO2_13
-702 MX35_PAD_ATA_DATA0__IPU_DIAGB_7
-703 MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3
-704 MX35_PAD_ATA_DATA1__ATA_DATA_1
-705 MX35_PAD_ATA_DATA1__ESDHC3_DAT6
-706 MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3
-707 MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK
-708 MX35_PAD_ATA_DATA1__ESDHC2_DAT6
-709 MX35_PAD_ATA_DATA1__GPIO2_14
-710 MX35_PAD_ATA_DATA1__IPU_DIAGB_8
-711 MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27
-712 MX35_PAD_ATA_DATA2__ATA_DATA_2
-713 MX35_PAD_ATA_DATA2__ESDHC3_DAT7
-714 MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4
-715 MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS
-716 MX35_PAD_ATA_DATA2__ESDHC2_DAT7
-717 MX35_PAD_ATA_DATA2__GPIO2_15
-718 MX35_PAD_ATA_DATA2__IPU_DIAGB_9
-719 MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28
-720 MX35_PAD_ATA_DATA3__ATA_DATA_3
-721 MX35_PAD_ATA_DATA3__ESDHC3_CLK
-722 MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5
-723 MX35_PAD_ATA_DATA3__CSPI2_SCLK
-724 MX35_PAD_ATA_DATA3__GPIO2_16
-725 MX35_PAD_ATA_DATA3__IPU_DIAGB_10
-726 MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29
-727 MX35_PAD_ATA_DATA4__ATA_DATA_4
-728 MX35_PAD_ATA_DATA4__ESDHC3_CMD
-729 MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6
-730 MX35_PAD_ATA_DATA4__GPIO2_17
-731 MX35_PAD_ATA_DATA4__IPU_DIAGB_11
-732 MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30
-733 MX35_PAD_ATA_DATA5__ATA_DATA_5
-734 MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7
-735 MX35_PAD_ATA_DATA5__GPIO2_18
-736 MX35_PAD_ATA_DATA5__IPU_DIAGB_12
-737 MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31
-738 MX35_PAD_ATA_DATA6__ATA_DATA_6
-739 MX35_PAD_ATA_DATA6__CAN1_TXCAN
-740 MX35_PAD_ATA_DATA6__UART1_DTR
-741 MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD
-742 MX35_PAD_ATA_DATA6__GPIO2_19
-743 MX35_PAD_ATA_DATA6__IPU_DIAGB_13
-744 MX35_PAD_ATA_DATA7__ATA_DATA_7
-745 MX35_PAD_ATA_DATA7__CAN1_RXCAN
-746 MX35_PAD_ATA_DATA7__UART1_DSR
-747 MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD
-748 MX35_PAD_ATA_DATA7__GPIO2_20
-749 MX35_PAD_ATA_DATA7__IPU_DIAGB_14
-750 MX35_PAD_ATA_DATA8__ATA_DATA_8
-751 MX35_PAD_ATA_DATA8__UART3_RTS
-752 MX35_PAD_ATA_DATA8__UART1_RI
-753 MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC
-754 MX35_PAD_ATA_DATA8__GPIO2_21
-755 MX35_PAD_ATA_DATA8__IPU_DIAGB_15
-756 MX35_PAD_ATA_DATA9__ATA_DATA_9
-757 MX35_PAD_ATA_DATA9__UART3_CTS
-758 MX35_PAD_ATA_DATA9__UART1_DCD
-759 MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS
-760 MX35_PAD_ATA_DATA9__GPIO2_22
-761 MX35_PAD_ATA_DATA9__IPU_DIAGB_16
-762 MX35_PAD_ATA_DATA10__ATA_DATA_10
-763 MX35_PAD_ATA_DATA10__UART3_RXD_MUX
-764 MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC
-765 MX35_PAD_ATA_DATA10__GPIO2_23
-766 MX35_PAD_ATA_DATA10__IPU_DIAGB_17
-767 MX35_PAD_ATA_DATA11__ATA_DATA_11
-768 MX35_PAD_ATA_DATA11__UART3_TXD_MUX
-769 MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS
-770 MX35_PAD_ATA_DATA11__GPIO2_24
-771 MX35_PAD_ATA_DATA11__IPU_DIAGB_18
-772 MX35_PAD_ATA_DATA12__ATA_DATA_12
-773 MX35_PAD_ATA_DATA12__I2C3_SCL
-774 MX35_PAD_ATA_DATA12__GPIO2_25
-775 MX35_PAD_ATA_DATA12__IPU_DIAGB_19
-776 MX35_PAD_ATA_DATA13__ATA_DATA_13
-777 MX35_PAD_ATA_DATA13__I2C3_SDA
-778 MX35_PAD_ATA_DATA13__GPIO2_26
-779 MX35_PAD_ATA_DATA13__IPU_DIAGB_20
-780 MX35_PAD_ATA_DATA14__ATA_DATA_14
-781 MX35_PAD_ATA_DATA14__IPU_CSI_D_0
-782 MX35_PAD_ATA_DATA14__KPP_ROW_0
-783 MX35_PAD_ATA_DATA14__GPIO2_27
-784 MX35_PAD_ATA_DATA14__IPU_DIAGB_21
-785 MX35_PAD_ATA_DATA15__ATA_DATA_15
-786 MX35_PAD_ATA_DATA15__IPU_CSI_D_1
-787 MX35_PAD_ATA_DATA15__KPP_ROW_1
-788 MX35_PAD_ATA_DATA15__GPIO2_28
-789 MX35_PAD_ATA_DATA15__IPU_DIAGB_22
-790 MX35_PAD_ATA_INTRQ__ATA_INTRQ
-791 MX35_PAD_ATA_INTRQ__IPU_CSI_D_2
-792 MX35_PAD_ATA_INTRQ__KPP_ROW_2
-793 MX35_PAD_ATA_INTRQ__GPIO2_29
-794 MX35_PAD_ATA_INTRQ__IPU_DIAGB_23
-795 MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN
-796 MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3
-797 MX35_PAD_ATA_BUFF_EN__KPP_ROW_3
-798 MX35_PAD_ATA_BUFF_EN__GPIO2_30
-799 MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24
-800 MX35_PAD_ATA_DMARQ__ATA_DMARQ
-801 MX35_PAD_ATA_DMARQ__IPU_CSI_D_4
-802 MX35_PAD_ATA_DMARQ__KPP_COL_0
-803 MX35_PAD_ATA_DMARQ__GPIO2_31
-804 MX35_PAD_ATA_DMARQ__IPU_DIAGB_25
-805 MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4
-806 MX35_PAD_ATA_DA0__ATA_DA_0
-807 MX35_PAD_ATA_DA0__IPU_CSI_D_5
-808 MX35_PAD_ATA_DA0__KPP_COL_1
-809 MX35_PAD_ATA_DA0__GPIO3_0
-810 MX35_PAD_ATA_DA0__IPU_DIAGB_26
-811 MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5
-812 MX35_PAD_ATA_DA1__ATA_DA_1
-813 MX35_PAD_ATA_DA1__IPU_CSI_D_6
-814 MX35_PAD_ATA_DA1__KPP_COL_2
-815 MX35_PAD_ATA_DA1__GPIO3_1
-816 MX35_PAD_ATA_DA1__IPU_DIAGB_27
-817 MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6
-818 MX35_PAD_ATA_DA2__ATA_DA_2
-819 MX35_PAD_ATA_DA2__IPU_CSI_D_7
-820 MX35_PAD_ATA_DA2__KPP_COL_3
-821 MX35_PAD_ATA_DA2__GPIO3_2
-822 MX35_PAD_ATA_DA2__IPU_DIAGB_28
-823 MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7
-824 MX35_PAD_MLB_CLK__MLB_MLBCLK
-825 MX35_PAD_MLB_CLK__GPIO3_3
-826 MX35_PAD_MLB_DAT__MLB_MLBDAT
-827 MX35_PAD_MLB_DAT__GPIO3_4
-828 MX35_PAD_MLB_SIG__MLB_MLBSIG
-829 MX35_PAD_MLB_SIG__GPIO3_5
-830 MX35_PAD_FEC_TX_CLK__FEC_TX_CLK
-831 MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4
-832 MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX
-833 MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR
-834 MX35_PAD_FEC_TX_CLK__CSPI2_MOSI
-835 MX35_PAD_FEC_TX_CLK__GPIO3_6
-836 MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC
-837 MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0
-838 MX35_PAD_FEC_RX_CLK__FEC_RX_CLK
-839 MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5
-840 MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX
-841 MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP
-842 MX35_PAD_FEC_RX_CLK__CSPI2_MISO
-843 MX35_PAD_FEC_RX_CLK__GPIO3_7
-844 MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I
-845 MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1
-846 MX35_PAD_FEC_RX_DV__FEC_RX_DV
-847 MX35_PAD_FEC_RX_DV__ESDHC1_DAT6
-848 MX35_PAD_FEC_RX_DV__UART3_RTS
-849 MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT
-850 MX35_PAD_FEC_RX_DV__CSPI2_SCLK
-851 MX35_PAD_FEC_RX_DV__GPIO3_8
-852 MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK
-853 MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2
-854 MX35_PAD_FEC_COL__FEC_COL
-855 MX35_PAD_FEC_COL__ESDHC1_DAT7
-856 MX35_PAD_FEC_COL__UART3_CTS
-857 MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0
-858 MX35_PAD_FEC_COL__CSPI2_RDY
-859 MX35_PAD_FEC_COL__GPIO3_9
-860 MX35_PAD_FEC_COL__IPU_DISPB_SER_RS
-861 MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3
-862 MX35_PAD_FEC_RDATA0__FEC_RDATA_0
-863 MX35_PAD_FEC_RDATA0__PWM_PWMO
-864 MX35_PAD_FEC_RDATA0__UART3_DTR
-865 MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1
-866 MX35_PAD_FEC_RDATA0__CSPI2_SS0
-867 MX35_PAD_FEC_RDATA0__GPIO3_10
-868 MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1
-869 MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4
-870 MX35_PAD_FEC_TDATA0__FEC_TDATA_0
-871 MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1
-872 MX35_PAD_FEC_TDATA0__UART3_DSR
-873 MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2
-874 MX35_PAD_FEC_TDATA0__CSPI2_SS1
-875 MX35_PAD_FEC_TDATA0__GPIO3_11
-876 MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0
-877 MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5
-878 MX35_PAD_FEC_TX_EN__FEC_TX_EN
-879 MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1
-880 MX35_PAD_FEC_TX_EN__UART3_RI
-881 MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3
-882 MX35_PAD_FEC_TX_EN__GPIO3_12
-883 MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS
-884 MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6
-885 MX35_PAD_FEC_MDC__FEC_MDC
-886 MX35_PAD_FEC_MDC__CAN2_TXCAN
-887 MX35_PAD_FEC_MDC__UART3_DCD
-888 MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4
-889 MX35_PAD_FEC_MDC__GPIO3_13
-890 MX35_PAD_FEC_MDC__IPU_DISPB_WR
-891 MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7
-892 MX35_PAD_FEC_MDIO__FEC_MDIO
-893 MX35_PAD_FEC_MDIO__CAN2_RXCAN
-894 MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5
-895 MX35_PAD_FEC_MDIO__GPIO3_14
-896 MX35_PAD_FEC_MDIO__IPU_DISPB_RD
-897 MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8
-898 MX35_PAD_FEC_TX_ERR__FEC_TX_ERR
-899 MX35_PAD_FEC_TX_ERR__OWIRE_LINE
-900 MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK
-901 MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6
-902 MX35_PAD_FEC_TX_ERR__GPIO3_15
-903 MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC
-904 MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9
-905 MX35_PAD_FEC_RX_ERR__FEC_RX_ERR
-906 MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0
-907 MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7
-908 MX35_PAD_FEC_RX_ERR__KPP_COL_4
-909 MX35_PAD_FEC_RX_ERR__GPIO3_16
-910 MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO
-911 MX35_PAD_FEC_CRS__FEC_CRS
-912 MX35_PAD_FEC_CRS__IPU_CSI_D_1
-913 MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR
-914 MX35_PAD_FEC_CRS__KPP_COL_5
-915 MX35_PAD_FEC_CRS__GPIO3_17
-916 MX35_PAD_FEC_CRS__IPU_FLASH_STROBE
-917 MX35_PAD_FEC_RDATA1__FEC_RDATA_1
-918 MX35_PAD_FEC_RDATA1__IPU_CSI_D_2
-919 MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC
-920 MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC
-921 MX35_PAD_FEC_RDATA1__KPP_COL_6
-922 MX35_PAD_FEC_RDATA1__GPIO3_18
-923 MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0
-924 MX35_PAD_FEC_TDATA1__FEC_TDATA_1
-925 MX35_PAD_FEC_TDATA1__IPU_CSI_D_3
-926 MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS
-927 MX35_PAD_FEC_TDATA1__KPP_COL_7
-928 MX35_PAD_FEC_TDATA1__GPIO3_19
-929 MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1
-930 MX35_PAD_FEC_RDATA2__FEC_RDATA_2
-931 MX35_PAD_FEC_RDATA2__IPU_CSI_D_4
-932 MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD
-933 MX35_PAD_FEC_RDATA2__KPP_ROW_4
-934 MX35_PAD_FEC_RDATA2__GPIO3_20
-935 MX35_PAD_FEC_TDATA2__FEC_TDATA_2
-936 MX35_PAD_FEC_TDATA2__IPU_CSI_D_5
-937 MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD
-938 MX35_PAD_FEC_TDATA2__KPP_ROW_5
-939 MX35_PAD_FEC_TDATA2__GPIO3_21
-940 MX35_PAD_FEC_RDATA3__FEC_RDATA_3
-941 MX35_PAD_FEC_RDATA3__IPU_CSI_D_6
-942 MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC
-943 MX35_PAD_FEC_RDATA3__KPP_ROW_6
-944 MX35_PAD_FEC_RDATA3__GPIO3_22
-945 MX35_PAD_FEC_TDATA3__FEC_TDATA_3
-946 MX35_PAD_FEC_TDATA3__IPU_CSI_D_7
-947 MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS
-948 MX35_PAD_FEC_TDATA3__KPP_ROW_7
-949 MX35_PAD_FEC_TDATA3__GPIO3_23
-950 MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK
-951 MX35_PAD_TEST_MODE__TCU_TEST_MODE
+Refer to imx35-pinfunc.h in device tree source folder for all available
+imx35 PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx51-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx51-pinctrl.txt
index b96fa4c31745..4d1408fcc99c 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx51-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx51-pinctrl.txt
@@ -28,760 +28,5 @@ PAD_CTL_DSE_MAX			(3 << 1)
 PAD_CTL_SRE_FAST                (1 << 0)
 PAD_CTL_SRE_SLOW                (0 << 0)
 
-See below for available PIN_FUNC_ID for imx51:
-MX51_PAD_EIM_D16__AUD4_RXFS                     0
-MX51_PAD_EIM_D16__AUD5_TXD                      1
-MX51_PAD_EIM_D16__EIM_D16                       2
-MX51_PAD_EIM_D16__GPIO2_0                       3
-MX51_PAD_EIM_D16__I2C1_SDA                      4
-MX51_PAD_EIM_D16__UART2_CTS                     5
-MX51_PAD_EIM_D16__USBH2_DATA0                   6
-MX51_PAD_EIM_D17__AUD5_RXD                      7
-MX51_PAD_EIM_D17__EIM_D17                       8
-MX51_PAD_EIM_D17__GPIO2_1                       9
-MX51_PAD_EIM_D17__UART2_RXD                     10
-MX51_PAD_EIM_D17__UART3_CTS                     11
-MX51_PAD_EIM_D17__USBH2_DATA1                   12
-MX51_PAD_EIM_D18__AUD5_TXC                      13
-MX51_PAD_EIM_D18__EIM_D18                       14
-MX51_PAD_EIM_D18__GPIO2_2                       15
-MX51_PAD_EIM_D18__UART2_TXD                     16
-MX51_PAD_EIM_D18__UART3_RTS                     17
-MX51_PAD_EIM_D18__USBH2_DATA2                   18
-MX51_PAD_EIM_D19__AUD4_RXC                      19
-MX51_PAD_EIM_D19__AUD5_TXFS                     20
-MX51_PAD_EIM_D19__EIM_D19                       21
-MX51_PAD_EIM_D19__GPIO2_3                       22
-MX51_PAD_EIM_D19__I2C1_SCL                      23
-MX51_PAD_EIM_D19__UART2_RTS                     24
-MX51_PAD_EIM_D19__USBH2_DATA3                   25
-MX51_PAD_EIM_D20__AUD4_TXD                      26
-MX51_PAD_EIM_D20__EIM_D20                       27
-MX51_PAD_EIM_D20__GPIO2_4                       28
-MX51_PAD_EIM_D20__SRTC_ALARM_DEB                29
-MX51_PAD_EIM_D20__USBH2_DATA4                   30
-MX51_PAD_EIM_D21__AUD4_RXD                      31
-MX51_PAD_EIM_D21__EIM_D21                       32
-MX51_PAD_EIM_D21__GPIO2_5                       33
-MX51_PAD_EIM_D21__SRTC_ALARM_DEB                34
-MX51_PAD_EIM_D21__USBH2_DATA5                   35
-MX51_PAD_EIM_D22__AUD4_TXC                      36
-MX51_PAD_EIM_D22__EIM_D22                       37
-MX51_PAD_EIM_D22__GPIO2_6                       38
-MX51_PAD_EIM_D22__USBH2_DATA6                   39
-MX51_PAD_EIM_D23__AUD4_TXFS                     40
-MX51_PAD_EIM_D23__EIM_D23                       41
-MX51_PAD_EIM_D23__GPIO2_7                       42
-MX51_PAD_EIM_D23__SPDIF_OUT1                    43
-MX51_PAD_EIM_D23__USBH2_DATA7                   44
-MX51_PAD_EIM_D24__AUD6_RXFS                     45
-MX51_PAD_EIM_D24__EIM_D24                       46
-MX51_PAD_EIM_D24__GPIO2_8                       47
-MX51_PAD_EIM_D24__I2C2_SDA                      48
-MX51_PAD_EIM_D24__UART3_CTS                     49
-MX51_PAD_EIM_D24__USBOTG_DATA0                  50
-MX51_PAD_EIM_D25__EIM_D25                       51
-MX51_PAD_EIM_D25__KEY_COL6                      52
-MX51_PAD_EIM_D25__UART2_CTS                     53
-MX51_PAD_EIM_D25__UART3_RXD                     54
-MX51_PAD_EIM_D25__USBOTG_DATA1                  55
-MX51_PAD_EIM_D26__EIM_D26                       56
-MX51_PAD_EIM_D26__KEY_COL7                      57
-MX51_PAD_EIM_D26__UART2_RTS                     58
-MX51_PAD_EIM_D26__UART3_TXD                     59
-MX51_PAD_EIM_D26__USBOTG_DATA2                  60
-MX51_PAD_EIM_D27__AUD6_RXC                      61
-MX51_PAD_EIM_D27__EIM_D27                       62
-MX51_PAD_EIM_D27__GPIO2_9                       63
-MX51_PAD_EIM_D27__I2C2_SCL                      64
-MX51_PAD_EIM_D27__UART3_RTS                     65
-MX51_PAD_EIM_D27__USBOTG_DATA3                  66
-MX51_PAD_EIM_D28__AUD6_TXD                      67
-MX51_PAD_EIM_D28__EIM_D28                       68
-MX51_PAD_EIM_D28__KEY_ROW4                      69
-MX51_PAD_EIM_D28__USBOTG_DATA4                  70
-MX51_PAD_EIM_D29__AUD6_RXD                      71
-MX51_PAD_EIM_D29__EIM_D29                       72
-MX51_PAD_EIM_D29__KEY_ROW5                      73
-MX51_PAD_EIM_D29__USBOTG_DATA5                  74
-MX51_PAD_EIM_D30__AUD6_TXC                      75
-MX51_PAD_EIM_D30__EIM_D30                       76
-MX51_PAD_EIM_D30__KEY_ROW6                      77
-MX51_PAD_EIM_D30__USBOTG_DATA6                  78
-MX51_PAD_EIM_D31__AUD6_TXFS                     79
-MX51_PAD_EIM_D31__EIM_D31                       80
-MX51_PAD_EIM_D31__KEY_ROW7                      81
-MX51_PAD_EIM_D31__USBOTG_DATA7                  82
-MX51_PAD_EIM_A16__EIM_A16                       83
-MX51_PAD_EIM_A16__GPIO2_10                      84
-MX51_PAD_EIM_A16__OSC_FREQ_SEL0                 85
-MX51_PAD_EIM_A17__EIM_A17                       86
-MX51_PAD_EIM_A17__GPIO2_11                      87
-MX51_PAD_EIM_A17__OSC_FREQ_SEL1                 88
-MX51_PAD_EIM_A18__BOOT_LPB0                     89
-MX51_PAD_EIM_A18__EIM_A18                       90
-MX51_PAD_EIM_A18__GPIO2_12                      91
-MX51_PAD_EIM_A19__BOOT_LPB1                     92
-MX51_PAD_EIM_A19__EIM_A19                       93
-MX51_PAD_EIM_A19__GPIO2_13                      94
-MX51_PAD_EIM_A20__BOOT_UART_SRC0                95
-MX51_PAD_EIM_A20__EIM_A20                       96
-MX51_PAD_EIM_A20__GPIO2_14                      97
-MX51_PAD_EIM_A21__BOOT_UART_SRC1                98
-MX51_PAD_EIM_A21__EIM_A21                       99
-MX51_PAD_EIM_A21__GPIO2_15                      100
-MX51_PAD_EIM_A22__EIM_A22                       101
-MX51_PAD_EIM_A22__GPIO2_16                      102
-MX51_PAD_EIM_A23__BOOT_HPN_EN                   103
-MX51_PAD_EIM_A23__EIM_A23                       104
-MX51_PAD_EIM_A23__GPIO2_17                      105
-MX51_PAD_EIM_A24__EIM_A24                       106
-MX51_PAD_EIM_A24__GPIO2_18                      107
-MX51_PAD_EIM_A24__USBH2_CLK                     108
-MX51_PAD_EIM_A25__DISP1_PIN4                    109
-MX51_PAD_EIM_A25__EIM_A25                       110
-MX51_PAD_EIM_A25__GPIO2_19                      111
-MX51_PAD_EIM_A25__USBH2_DIR                     112
-MX51_PAD_EIM_A26__CSI1_DATA_EN                  113
-MX51_PAD_EIM_A26__DISP2_EXT_CLK                 114
-MX51_PAD_EIM_A26__EIM_A26                       115
-MX51_PAD_EIM_A26__GPIO2_20                      116
-MX51_PAD_EIM_A26__USBH2_STP                     117
-MX51_PAD_EIM_A27__CSI2_DATA_EN                  118
-MX51_PAD_EIM_A27__DISP1_PIN1                    119
-MX51_PAD_EIM_A27__EIM_A27                       120
-MX51_PAD_EIM_A27__GPIO2_21                      121
-MX51_PAD_EIM_A27__USBH2_NXT                     122
-MX51_PAD_EIM_EB0__EIM_EB0                       123
-MX51_PAD_EIM_EB1__EIM_EB1                       124
-MX51_PAD_EIM_EB2__AUD5_RXFS                     125
-MX51_PAD_EIM_EB2__CSI1_D2                       126
-MX51_PAD_EIM_EB2__EIM_EB2                       127
-MX51_PAD_EIM_EB2__FEC_MDIO                      128
-MX51_PAD_EIM_EB2__GPIO2_22                      129
-MX51_PAD_EIM_EB2__GPT_CMPOUT1                   130
-MX51_PAD_EIM_EB3__AUD5_RXC                      131
-MX51_PAD_EIM_EB3__CSI1_D3                       132
-MX51_PAD_EIM_EB3__EIM_EB3                       133
-MX51_PAD_EIM_EB3__FEC_RDATA1                    134
-MX51_PAD_EIM_EB3__GPIO2_23                      135
-MX51_PAD_EIM_EB3__GPT_CMPOUT2                   136
-MX51_PAD_EIM_OE__EIM_OE                         137
-MX51_PAD_EIM_OE__GPIO2_24                       138
-MX51_PAD_EIM_CS0__EIM_CS0                       139
-MX51_PAD_EIM_CS0__GPIO2_25                      140
-MX51_PAD_EIM_CS1__EIM_CS1                       141
-MX51_PAD_EIM_CS1__GPIO2_26                      142
-MX51_PAD_EIM_CS2__AUD5_TXD                      143
-MX51_PAD_EIM_CS2__CSI1_D4                       144
-MX51_PAD_EIM_CS2__EIM_CS2                       145
-MX51_PAD_EIM_CS2__FEC_RDATA2                    146
-MX51_PAD_EIM_CS2__GPIO2_27                      147
-MX51_PAD_EIM_CS2__USBOTG_STP                    148
-MX51_PAD_EIM_CS3__AUD5_RXD                      149
-MX51_PAD_EIM_CS3__CSI1_D5                       150
-MX51_PAD_EIM_CS3__EIM_CS3                       151
-MX51_PAD_EIM_CS3__FEC_RDATA3                    152
-MX51_PAD_EIM_CS3__GPIO2_28                      153
-MX51_PAD_EIM_CS3__USBOTG_NXT                    154
-MX51_PAD_EIM_CS4__AUD5_TXC                      155
-MX51_PAD_EIM_CS4__CSI1_D6                       156
-MX51_PAD_EIM_CS4__EIM_CS4                       157
-MX51_PAD_EIM_CS4__FEC_RX_ER                     158
-MX51_PAD_EIM_CS4__GPIO2_29                      159
-MX51_PAD_EIM_CS4__USBOTG_CLK                    160
-MX51_PAD_EIM_CS5__AUD5_TXFS                     161
-MX51_PAD_EIM_CS5__CSI1_D7                       162
-MX51_PAD_EIM_CS5__DISP1_EXT_CLK                 163
-MX51_PAD_EIM_CS5__EIM_CS5                       164
-MX51_PAD_EIM_CS5__FEC_CRS                       165
-MX51_PAD_EIM_CS5__GPIO2_30                      166
-MX51_PAD_EIM_CS5__USBOTG_DIR                    167
-MX51_PAD_EIM_DTACK__EIM_DTACK                   168
-MX51_PAD_EIM_DTACK__GPIO2_31                    169
-MX51_PAD_EIM_LBA__EIM_LBA                       170
-MX51_PAD_EIM_LBA__GPIO3_1                       171
-MX51_PAD_EIM_CRE__EIM_CRE                       172
-MX51_PAD_EIM_CRE__GPIO3_2                       173
-MX51_PAD_DRAM_CS1__DRAM_CS1                     174
-MX51_PAD_NANDF_WE_B__GPIO3_3                    175
-MX51_PAD_NANDF_WE_B__NANDF_WE_B                 176
-MX51_PAD_NANDF_WE_B__PATA_DIOW                  177
-MX51_PAD_NANDF_WE_B__SD3_DATA0                  178
-MX51_PAD_NANDF_RE_B__GPIO3_4                    179
-MX51_PAD_NANDF_RE_B__NANDF_RE_B                 180
-MX51_PAD_NANDF_RE_B__PATA_DIOR                  181
-MX51_PAD_NANDF_RE_B__SD3_DATA1                  182
-MX51_PAD_NANDF_ALE__GPIO3_5                     183
-MX51_PAD_NANDF_ALE__NANDF_ALE                   184
-MX51_PAD_NANDF_ALE__PATA_BUFFER_EN              185
-MX51_PAD_NANDF_CLE__GPIO3_6                     186
-MX51_PAD_NANDF_CLE__NANDF_CLE                   187
-MX51_PAD_NANDF_CLE__PATA_RESET_B                188
-MX51_PAD_NANDF_WP_B__GPIO3_7                    189
-MX51_PAD_NANDF_WP_B__NANDF_WP_B                 190
-MX51_PAD_NANDF_WP_B__PATA_DMACK                 191
-MX51_PAD_NANDF_WP_B__SD3_DATA2                  192
-MX51_PAD_NANDF_RB0__ECSPI2_SS1                  193
-MX51_PAD_NANDF_RB0__GPIO3_8                     194
-MX51_PAD_NANDF_RB0__NANDF_RB0                   195
-MX51_PAD_NANDF_RB0__PATA_DMARQ                  196
-MX51_PAD_NANDF_RB0__SD3_DATA3                   197
-MX51_PAD_NANDF_RB1__CSPI_MOSI                   198
-MX51_PAD_NANDF_RB1__ECSPI2_RDY                  199
-MX51_PAD_NANDF_RB1__GPIO3_9                     200
-MX51_PAD_NANDF_RB1__NANDF_RB1                   201
-MX51_PAD_NANDF_RB1__PATA_IORDY                  202
-MX51_PAD_NANDF_RB1__SD4_CMD                     203
-MX51_PAD_NANDF_RB2__DISP2_WAIT                  204
-MX51_PAD_NANDF_RB2__ECSPI2_SCLK                 205
-MX51_PAD_NANDF_RB2__FEC_COL                     206
-MX51_PAD_NANDF_RB2__GPIO3_10                    207
-MX51_PAD_NANDF_RB2__NANDF_RB2                   208
-MX51_PAD_NANDF_RB2__USBH3_H3_DP                 209
-MX51_PAD_NANDF_RB2__USBH3_NXT                   210
-MX51_PAD_NANDF_RB3__DISP1_WAIT                  211
-MX51_PAD_NANDF_RB3__ECSPI2_MISO                 212
-MX51_PAD_NANDF_RB3__FEC_RX_CLK                  213
-MX51_PAD_NANDF_RB3__GPIO3_11                    214
-MX51_PAD_NANDF_RB3__NANDF_RB3                   215
-MX51_PAD_NANDF_RB3__USBH3_CLK                   216
-MX51_PAD_NANDF_RB3__USBH3_H3_DM                 217
-MX51_PAD_GPIO_NAND__GPIO_NAND                   218
-MX51_PAD_GPIO_NAND__PATA_INTRQ                  219
-MX51_PAD_NANDF_CS0__GPIO3_16                    220
-MX51_PAD_NANDF_CS0__NANDF_CS0                   221
-MX51_PAD_NANDF_CS1__GPIO3_17                    222
-MX51_PAD_NANDF_CS1__NANDF_CS1                   223
-MX51_PAD_NANDF_CS2__CSPI_SCLK                   224
-MX51_PAD_NANDF_CS2__FEC_TX_ER                   225
-MX51_PAD_NANDF_CS2__GPIO3_18                    226
-MX51_PAD_NANDF_CS2__NANDF_CS2                   227
-MX51_PAD_NANDF_CS2__PATA_CS_0                   228
-MX51_PAD_NANDF_CS2__SD4_CLK                     229
-MX51_PAD_NANDF_CS2__USBH3_H1_DP                 230
-MX51_PAD_NANDF_CS3__FEC_MDC                     231
-MX51_PAD_NANDF_CS3__GPIO3_19                    232
-MX51_PAD_NANDF_CS3__NANDF_CS3                   233
-MX51_PAD_NANDF_CS3__PATA_CS_1                   234
-MX51_PAD_NANDF_CS3__SD4_DAT0                    235
-MX51_PAD_NANDF_CS3__USBH3_H1_DM                 236
-MX51_PAD_NANDF_CS4__FEC_TDATA1                  237
-MX51_PAD_NANDF_CS4__GPIO3_20                    238
-MX51_PAD_NANDF_CS4__NANDF_CS4                   239
-MX51_PAD_NANDF_CS4__PATA_DA_0                   240
-MX51_PAD_NANDF_CS4__SD4_DAT1                    241
-MX51_PAD_NANDF_CS4__USBH3_STP                   242
-MX51_PAD_NANDF_CS5__FEC_TDATA2                  243
-MX51_PAD_NANDF_CS5__GPIO3_21                    244
-MX51_PAD_NANDF_CS5__NANDF_CS5                   245
-MX51_PAD_NANDF_CS5__PATA_DA_1                   246
-MX51_PAD_NANDF_CS5__SD4_DAT2                    247
-MX51_PAD_NANDF_CS5__USBH3_DIR                   248
-MX51_PAD_NANDF_CS6__CSPI_SS3                    249
-MX51_PAD_NANDF_CS6__FEC_TDATA3                  250
-MX51_PAD_NANDF_CS6__GPIO3_22                    251
-MX51_PAD_NANDF_CS6__NANDF_CS6                   252
-MX51_PAD_NANDF_CS6__PATA_DA_2                   253
-MX51_PAD_NANDF_CS6__SD4_DAT3                    254
-MX51_PAD_NANDF_CS7__FEC_TX_EN                   255
-MX51_PAD_NANDF_CS7__GPIO3_23                    256
-MX51_PAD_NANDF_CS7__NANDF_CS7                   257
-MX51_PAD_NANDF_CS7__SD3_CLK                     258
-MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0              259
-MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK              260
-MX51_PAD_NANDF_RDY_INT__GPIO3_24                261
-MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT           262
-MX51_PAD_NANDF_RDY_INT__SD3_CMD                 263
-MX51_PAD_NANDF_D15__ECSPI2_MOSI                 264
-MX51_PAD_NANDF_D15__GPIO3_25                    265
-MX51_PAD_NANDF_D15__NANDF_D15                   266
-MX51_PAD_NANDF_D15__PATA_DATA15                 267
-MX51_PAD_NANDF_D15__SD3_DAT7                    268
-MX51_PAD_NANDF_D14__ECSPI2_SS3                  269
-MX51_PAD_NANDF_D14__GPIO3_26                    270
-MX51_PAD_NANDF_D14__NANDF_D14                   271
-MX51_PAD_NANDF_D14__PATA_DATA14                 272
-MX51_PAD_NANDF_D14__SD3_DAT6                    273
-MX51_PAD_NANDF_D13__ECSPI2_SS2                  274
-MX51_PAD_NANDF_D13__GPIO3_27                    275
-MX51_PAD_NANDF_D13__NANDF_D13                   276
-MX51_PAD_NANDF_D13__PATA_DATA13                 277
-MX51_PAD_NANDF_D13__SD3_DAT5                    278
-MX51_PAD_NANDF_D12__ECSPI2_SS1                  279
-MX51_PAD_NANDF_D12__GPIO3_28                    280
-MX51_PAD_NANDF_D12__NANDF_D12                   281
-MX51_PAD_NANDF_D12__PATA_DATA12                 282
-MX51_PAD_NANDF_D12__SD3_DAT4                    283
-MX51_PAD_NANDF_D11__FEC_RX_DV                   284
-MX51_PAD_NANDF_D11__GPIO3_29                    285
-MX51_PAD_NANDF_D11__NANDF_D11                   286
-MX51_PAD_NANDF_D11__PATA_DATA11                 287
-MX51_PAD_NANDF_D11__SD3_DATA3                   288
-MX51_PAD_NANDF_D10__GPIO3_30                    289
-MX51_PAD_NANDF_D10__NANDF_D10                   290
-MX51_PAD_NANDF_D10__PATA_DATA10                 291
-MX51_PAD_NANDF_D10__SD3_DATA2                   292
-MX51_PAD_NANDF_D9__FEC_RDATA0                   293
-MX51_PAD_NANDF_D9__GPIO3_31                     294
-MX51_PAD_NANDF_D9__NANDF_D9                     295
-MX51_PAD_NANDF_D9__PATA_DATA9                   296
-MX51_PAD_NANDF_D9__SD3_DATA1                    297
-MX51_PAD_NANDF_D8__FEC_TDATA0                   298
-MX51_PAD_NANDF_D8__GPIO4_0                      299
-MX51_PAD_NANDF_D8__NANDF_D8                     300
-MX51_PAD_NANDF_D8__PATA_DATA8                   301
-MX51_PAD_NANDF_D8__SD3_DATA0                    302
-MX51_PAD_NANDF_D7__GPIO4_1                      303
-MX51_PAD_NANDF_D7__NANDF_D7                     304
-MX51_PAD_NANDF_D7__PATA_DATA7                   305
-MX51_PAD_NANDF_D7__USBH3_DATA0                  306
-MX51_PAD_NANDF_D6__GPIO4_2                      307
-MX51_PAD_NANDF_D6__NANDF_D6                     308
-MX51_PAD_NANDF_D6__PATA_DATA6                   309
-MX51_PAD_NANDF_D6__SD4_LCTL                     310
-MX51_PAD_NANDF_D6__USBH3_DATA1                  311
-MX51_PAD_NANDF_D5__GPIO4_3                      312
-MX51_PAD_NANDF_D5__NANDF_D5                     313
-MX51_PAD_NANDF_D5__PATA_DATA5                   314
-MX51_PAD_NANDF_D5__SD4_WP                       315
-MX51_PAD_NANDF_D5__USBH3_DATA2                  316
-MX51_PAD_NANDF_D4__GPIO4_4                      317
-MX51_PAD_NANDF_D4__NANDF_D4                     318
-MX51_PAD_NANDF_D4__PATA_DATA4                   319
-MX51_PAD_NANDF_D4__SD4_CD                       320
-MX51_PAD_NANDF_D4__USBH3_DATA3                  321
-MX51_PAD_NANDF_D3__GPIO4_5                      322
-MX51_PAD_NANDF_D3__NANDF_D3                     323
-MX51_PAD_NANDF_D3__PATA_DATA3                   324
-MX51_PAD_NANDF_D3__SD4_DAT4                     325
-MX51_PAD_NANDF_D3__USBH3_DATA4                  326
-MX51_PAD_NANDF_D2__GPIO4_6                      327
-MX51_PAD_NANDF_D2__NANDF_D2                     328
-MX51_PAD_NANDF_D2__PATA_DATA2                   329
-MX51_PAD_NANDF_D2__SD4_DAT5                     330
-MX51_PAD_NANDF_D2__USBH3_DATA5                  331
-MX51_PAD_NANDF_D1__GPIO4_7                      332
-MX51_PAD_NANDF_D1__NANDF_D1                     333
-MX51_PAD_NANDF_D1__PATA_DATA1                   334
-MX51_PAD_NANDF_D1__SD4_DAT6                     335
-MX51_PAD_NANDF_D1__USBH3_DATA6                  336
-MX51_PAD_NANDF_D0__GPIO4_8                      337
-MX51_PAD_NANDF_D0__NANDF_D0                     338
-MX51_PAD_NANDF_D0__PATA_DATA0                   339
-MX51_PAD_NANDF_D0__SD4_DAT7                     340
-MX51_PAD_NANDF_D0__USBH3_DATA7                  341
-MX51_PAD_CSI1_D8__CSI1_D8                       342
-MX51_PAD_CSI1_D8__GPIO3_12                      343
-MX51_PAD_CSI1_D9__CSI1_D9                       344
-MX51_PAD_CSI1_D9__GPIO3_13                      345
-MX51_PAD_CSI1_D10__CSI1_D10                     346
-MX51_PAD_CSI1_D11__CSI1_D11                     347
-MX51_PAD_CSI1_D12__CSI1_D12                     348
-MX51_PAD_CSI1_D13__CSI1_D13                     349
-MX51_PAD_CSI1_D14__CSI1_D14                     350
-MX51_PAD_CSI1_D15__CSI1_D15                     351
-MX51_PAD_CSI1_D16__CSI1_D16                     352
-MX51_PAD_CSI1_D17__CSI1_D17                     353
-MX51_PAD_CSI1_D18__CSI1_D18                     354
-MX51_PAD_CSI1_D19__CSI1_D19                     355
-MX51_PAD_CSI1_VSYNC__CSI1_VSYNC                 356
-MX51_PAD_CSI1_VSYNC__GPIO3_14                   357
-MX51_PAD_CSI1_HSYNC__CSI1_HSYNC                 358
-MX51_PAD_CSI1_HSYNC__GPIO3_15                   359
-MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK               360
-MX51_PAD_CSI1_MCLK__CSI1_MCLK                   361
-MX51_PAD_CSI2_D12__CSI2_D12                     362
-MX51_PAD_CSI2_D12__GPIO4_9                      363
-MX51_PAD_CSI2_D13__CSI2_D13                     364
-MX51_PAD_CSI2_D13__GPIO4_10                     365
-MX51_PAD_CSI2_D14__CSI2_D14                     366
-MX51_PAD_CSI2_D15__CSI2_D15                     367
-MX51_PAD_CSI2_D16__CSI2_D16                     368
-MX51_PAD_CSI2_D17__CSI2_D17                     369
-MX51_PAD_CSI2_D18__CSI2_D18                     370
-MX51_PAD_CSI2_D18__GPIO4_11                     371
-MX51_PAD_CSI2_D19__CSI2_D19                     372
-MX51_PAD_CSI2_D19__GPIO4_12                     373
-MX51_PAD_CSI2_VSYNC__CSI2_VSYNC                 374
-MX51_PAD_CSI2_VSYNC__GPIO4_13                   375
-MX51_PAD_CSI2_HSYNC__CSI2_HSYNC                 376
-MX51_PAD_CSI2_HSYNC__GPIO4_14                   377
-MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK               378
-MX51_PAD_CSI2_PIXCLK__GPIO4_15                  379
-MX51_PAD_I2C1_CLK__GPIO4_16                     380
-MX51_PAD_I2C1_CLK__I2C1_CLK                     381
-MX51_PAD_I2C1_DAT__GPIO4_17                     382
-MX51_PAD_I2C1_DAT__I2C1_DAT                     383
-MX51_PAD_AUD3_BB_TXD__AUD3_TXD                  384
-MX51_PAD_AUD3_BB_TXD__GPIO4_18                  385
-MX51_PAD_AUD3_BB_RXD__AUD3_RXD                  386
-MX51_PAD_AUD3_BB_RXD__GPIO4_19                  387
-MX51_PAD_AUD3_BB_RXD__UART3_RXD                 388
-MX51_PAD_AUD3_BB_CK__AUD3_TXC                   389
-MX51_PAD_AUD3_BB_CK__GPIO4_20                   390
-MX51_PAD_AUD3_BB_FS__AUD3_TXFS                  391
-MX51_PAD_AUD3_BB_FS__GPIO4_21                   392
-MX51_PAD_AUD3_BB_FS__UART3_TXD                  393
-MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI                394
-MX51_PAD_CSPI1_MOSI__GPIO4_22                   395
-MX51_PAD_CSPI1_MOSI__I2C1_SDA                   396
-MX51_PAD_CSPI1_MISO__AUD4_RXD                   397
-MX51_PAD_CSPI1_MISO__ECSPI1_MISO                398
-MX51_PAD_CSPI1_MISO__GPIO4_23                   399
-MX51_PAD_CSPI1_SS0__AUD4_TXC                    400
-MX51_PAD_CSPI1_SS0__ECSPI1_SS0                  401
-MX51_PAD_CSPI1_SS0__GPIO4_24                    402
-MX51_PAD_CSPI1_SS1__AUD4_TXD                    403
-MX51_PAD_CSPI1_SS1__ECSPI1_SS1                  404
-MX51_PAD_CSPI1_SS1__GPIO4_25                    405
-MX51_PAD_CSPI1_RDY__AUD4_TXFS                   406
-MX51_PAD_CSPI1_RDY__ECSPI1_RDY                  407
-MX51_PAD_CSPI1_RDY__GPIO4_26                    408
-MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK                409
-MX51_PAD_CSPI1_SCLK__GPIO4_27                   410
-MX51_PAD_CSPI1_SCLK__I2C1_SCL                   411
-MX51_PAD_UART1_RXD__GPIO4_28                    412
-MX51_PAD_UART1_RXD__UART1_RXD                   413
-MX51_PAD_UART1_TXD__GPIO4_29                    414
-MX51_PAD_UART1_TXD__PWM2_PWMO                   415
-MX51_PAD_UART1_TXD__UART1_TXD                   416
-MX51_PAD_UART1_RTS__GPIO4_30                    417
-MX51_PAD_UART1_RTS__UART1_RTS                   418
-MX51_PAD_UART1_CTS__GPIO4_31                    419
-MX51_PAD_UART1_CTS__UART1_CTS                   420
-MX51_PAD_UART2_RXD__FIRI_TXD                    421
-MX51_PAD_UART2_RXD__GPIO1_20                    422
-MX51_PAD_UART2_RXD__UART2_RXD                   423
-MX51_PAD_UART2_TXD__FIRI_RXD                    424
-MX51_PAD_UART2_TXD__GPIO1_21                    425
-MX51_PAD_UART2_TXD__UART2_TXD                   426
-MX51_PAD_UART3_RXD__CSI1_D0                     427
-MX51_PAD_UART3_RXD__GPIO1_22                    428
-MX51_PAD_UART3_RXD__UART1_DTR                   429
-MX51_PAD_UART3_RXD__UART3_RXD                   430
-MX51_PAD_UART3_TXD__CSI1_D1                     431
-MX51_PAD_UART3_TXD__GPIO1_23                    432
-MX51_PAD_UART3_TXD__UART1_DSR                   433
-MX51_PAD_UART3_TXD__UART3_TXD                   434
-MX51_PAD_OWIRE_LINE__GPIO1_24                   435
-MX51_PAD_OWIRE_LINE__OWIRE_LINE                 436
-MX51_PAD_OWIRE_LINE__SPDIF_OUT                  437
-MX51_PAD_KEY_ROW0__KEY_ROW0                     438
-MX51_PAD_KEY_ROW1__KEY_ROW1                     439
-MX51_PAD_KEY_ROW2__KEY_ROW2                     440
-MX51_PAD_KEY_ROW3__KEY_ROW3                     441
-MX51_PAD_KEY_COL0__KEY_COL0                     442
-MX51_PAD_KEY_COL0__PLL1_BYP                     443
-MX51_PAD_KEY_COL1__KEY_COL1                     444
-MX51_PAD_KEY_COL1__PLL2_BYP                     445
-MX51_PAD_KEY_COL2__KEY_COL2                     446
-MX51_PAD_KEY_COL2__PLL3_BYP                     447
-MX51_PAD_KEY_COL3__KEY_COL3                     448
-MX51_PAD_KEY_COL4__I2C2_SCL                     449
-MX51_PAD_KEY_COL4__KEY_COL4                     450
-MX51_PAD_KEY_COL4__SPDIF_OUT1                   451
-MX51_PAD_KEY_COL4__UART1_RI                     452
-MX51_PAD_KEY_COL4__UART3_RTS                    453
-MX51_PAD_KEY_COL5__I2C2_SDA                     454
-MX51_PAD_KEY_COL5__KEY_COL5                     455
-MX51_PAD_KEY_COL5__UART1_DCD                    456
-MX51_PAD_KEY_COL5__UART3_CTS                    457
-MX51_PAD_USBH1_CLK__CSPI_SCLK                   458
-MX51_PAD_USBH1_CLK__GPIO1_25                    459
-MX51_PAD_USBH1_CLK__I2C2_SCL                    460
-MX51_PAD_USBH1_CLK__USBH1_CLK                   461
-MX51_PAD_USBH1_DIR__CSPI_MOSI                   462
-MX51_PAD_USBH1_DIR__GPIO1_26                    463
-MX51_PAD_USBH1_DIR__I2C2_SDA                    464
-MX51_PAD_USBH1_DIR__USBH1_DIR                   465
-MX51_PAD_USBH1_STP__CSPI_RDY                    466
-MX51_PAD_USBH1_STP__GPIO1_27                    467
-MX51_PAD_USBH1_STP__UART3_RXD                   468
-MX51_PAD_USBH1_STP__USBH1_STP                   469
-MX51_PAD_USBH1_NXT__CSPI_MISO                   470
-MX51_PAD_USBH1_NXT__GPIO1_28                    471
-MX51_PAD_USBH1_NXT__UART3_TXD                   472
-MX51_PAD_USBH1_NXT__USBH1_NXT                   473
-MX51_PAD_USBH1_DATA0__GPIO1_11                  474
-MX51_PAD_USBH1_DATA0__UART2_CTS                 475
-MX51_PAD_USBH1_DATA0__USBH1_DATA0               476
-MX51_PAD_USBH1_DATA1__GPIO1_12                  477
-MX51_PAD_USBH1_DATA1__UART2_RXD                 478
-MX51_PAD_USBH1_DATA1__USBH1_DATA1               479
-MX51_PAD_USBH1_DATA2__GPIO1_13                  480
-MX51_PAD_USBH1_DATA2__UART2_TXD                 481
-MX51_PAD_USBH1_DATA2__USBH1_DATA2               482
-MX51_PAD_USBH1_DATA3__GPIO1_14                  483
-MX51_PAD_USBH1_DATA3__UART2_RTS                 484
-MX51_PAD_USBH1_DATA3__USBH1_DATA3               485
-MX51_PAD_USBH1_DATA4__CSPI_SS0                  486
-MX51_PAD_USBH1_DATA4__GPIO1_15                  487
-MX51_PAD_USBH1_DATA4__USBH1_DATA4               488
-MX51_PAD_USBH1_DATA5__CSPI_SS1                  489
-MX51_PAD_USBH1_DATA5__GPIO1_16                  490
-MX51_PAD_USBH1_DATA5__USBH1_DATA5               491
-MX51_PAD_USBH1_DATA6__CSPI_SS3                  492
-MX51_PAD_USBH1_DATA6__GPIO1_17                  493
-MX51_PAD_USBH1_DATA6__USBH1_DATA6               494
-MX51_PAD_USBH1_DATA7__ECSPI1_SS3                495
-MX51_PAD_USBH1_DATA7__ECSPI2_SS3                496
-MX51_PAD_USBH1_DATA7__GPIO1_18                  497
-MX51_PAD_USBH1_DATA7__USBH1_DATA7               498
-MX51_PAD_DI1_PIN11__DI1_PIN11                   499
-MX51_PAD_DI1_PIN11__ECSPI1_SS2                  500
-MX51_PAD_DI1_PIN11__GPIO3_0                     501
-MX51_PAD_DI1_PIN12__DI1_PIN12                   502
-MX51_PAD_DI1_PIN12__GPIO3_1                     503
-MX51_PAD_DI1_PIN13__DI1_PIN13                   504
-MX51_PAD_DI1_PIN13__GPIO3_2                     505
-MX51_PAD_DI1_D0_CS__DI1_D0_CS                   506
-MX51_PAD_DI1_D0_CS__GPIO3_3                     507
-MX51_PAD_DI1_D1_CS__DI1_D1_CS                   508
-MX51_PAD_DI1_D1_CS__DISP1_PIN14                 509
-MX51_PAD_DI1_D1_CS__DISP1_PIN5                  510
-MX51_PAD_DI1_D1_CS__GPIO3_4                     511
-MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1             512
-MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN         513
-MX51_PAD_DISPB2_SER_DIN__GPIO3_5                514
-MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6             515
-MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO         516
-MX51_PAD_DISPB2_SER_DIO__GPIO3_6                517
-MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17            518
-MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7             519
-MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK         520
-MX51_PAD_DISPB2_SER_CLK__GPIO3_7                521
-MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK           522
-MX51_PAD_DISPB2_SER_RS__DISP1_PIN16             523
-MX51_PAD_DISPB2_SER_RS__DISP1_PIN8              524
-MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS           525
-MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS           526
-MX51_PAD_DISPB2_SER_RS__GPIO3_8                 527
-MX51_PAD_DISP1_DAT0__DISP1_DAT0                 528
-MX51_PAD_DISP1_DAT1__DISP1_DAT1                 529
-MX51_PAD_DISP1_DAT2__DISP1_DAT2                 530
-MX51_PAD_DISP1_DAT3__DISP1_DAT3                 531
-MX51_PAD_DISP1_DAT4__DISP1_DAT4                 532
-MX51_PAD_DISP1_DAT5__DISP1_DAT5                 533
-MX51_PAD_DISP1_DAT6__BOOT_USB_SRC               534
-MX51_PAD_DISP1_DAT6__DISP1_DAT6                 535
-MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG            536
-MX51_PAD_DISP1_DAT7__DISP1_DAT7                 537
-MX51_PAD_DISP1_DAT8__BOOT_SRC0                  538
-MX51_PAD_DISP1_DAT8__DISP1_DAT8                 539
-MX51_PAD_DISP1_DAT9__BOOT_SRC1                  540
-MX51_PAD_DISP1_DAT9__DISP1_DAT9                 541
-MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE           542
-MX51_PAD_DISP1_DAT10__DISP1_DAT10               543
-MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2            544
-MX51_PAD_DISP1_DAT11__DISP1_DAT11               545
-MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL              546
-MX51_PAD_DISP1_DAT12__DISP1_DAT12               547
-MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0             548
-MX51_PAD_DISP1_DAT13__DISP1_DAT13               549
-MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1             550
-MX51_PAD_DISP1_DAT14__DISP1_DAT14               551
-MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH            552
-MX51_PAD_DISP1_DAT15__DISP1_DAT15               553
-MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0           554
-MX51_PAD_DISP1_DAT16__DISP1_DAT16               555
-MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1           556
-MX51_PAD_DISP1_DAT17__DISP1_DAT17               557
-MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0          558
-MX51_PAD_DISP1_DAT18__DISP1_DAT18               559
-MX51_PAD_DISP1_DAT18__DISP2_PIN11               560
-MX51_PAD_DISP1_DAT18__DISP2_PIN5                561
-MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1          562
-MX51_PAD_DISP1_DAT19__DISP1_DAT19               563
-MX51_PAD_DISP1_DAT19__DISP2_PIN12               564
-MX51_PAD_DISP1_DAT19__DISP2_PIN6                565
-MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0            566
-MX51_PAD_DISP1_DAT20__DISP1_DAT20               567
-MX51_PAD_DISP1_DAT20__DISP2_PIN13               568
-MX51_PAD_DISP1_DAT20__DISP2_PIN7                569
-MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1            570
-MX51_PAD_DISP1_DAT21__DISP1_DAT21               571
-MX51_PAD_DISP1_DAT21__DISP2_PIN14               572
-MX51_PAD_DISP1_DAT21__DISP2_PIN8                573
-MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0            574
-MX51_PAD_DISP1_DAT22__DISP1_DAT22               575
-MX51_PAD_DISP1_DAT22__DISP2_D0_CS               576
-MX51_PAD_DISP1_DAT22__DISP2_DAT16               577
-MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1            578
-MX51_PAD_DISP1_DAT23__DISP1_DAT23               579
-MX51_PAD_DISP1_DAT23__DISP2_D1_CS               580
-MX51_PAD_DISP1_DAT23__DISP2_DAT17               581
-MX51_PAD_DISP1_DAT23__DISP2_SER_CS              582
-MX51_PAD_DI1_PIN3__DI1_PIN3                     583
-MX51_PAD_DI1_PIN2__DI1_PIN2                     584
-MX51_PAD_DI_GP2__DISP1_SER_CLK                  585
-MX51_PAD_DI_GP2__DISP2_WAIT                     586
-MX51_PAD_DI_GP3__CSI1_DATA_EN                   587
-MX51_PAD_DI_GP3__DISP1_SER_DIO                  588
-MX51_PAD_DI_GP3__FEC_TX_ER                      589
-MX51_PAD_DI2_PIN4__CSI2_DATA_EN                 590
-MX51_PAD_DI2_PIN4__DI2_PIN4                     591
-MX51_PAD_DI2_PIN4__FEC_CRS                      592
-MX51_PAD_DI2_PIN2__DI2_PIN2                     593
-MX51_PAD_DI2_PIN2__FEC_MDC                      594
-MX51_PAD_DI2_PIN3__DI2_PIN3                     595
-MX51_PAD_DI2_PIN3__FEC_MDIO                     596
-MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK             597
-MX51_PAD_DI2_DISP_CLK__FEC_RDATA1               598
-MX51_PAD_DI_GP4__DI2_PIN15                      599
-MX51_PAD_DI_GP4__DISP1_SER_DIN                  600
-MX51_PAD_DI_GP4__DISP2_PIN1                     601
-MX51_PAD_DI_GP4__FEC_RDATA2                     602
-MX51_PAD_DISP2_DAT0__DISP2_DAT0                 603
-MX51_PAD_DISP2_DAT0__FEC_RDATA3                 604
-MX51_PAD_DISP2_DAT0__KEY_COL6                   605
-MX51_PAD_DISP2_DAT0__UART3_RXD                  606
-MX51_PAD_DISP2_DAT0__USBH3_CLK                  607
-MX51_PAD_DISP2_DAT1__DISP2_DAT1                 608
-MX51_PAD_DISP2_DAT1__FEC_RX_ER                  609
-MX51_PAD_DISP2_DAT1__KEY_COL7                   610
-MX51_PAD_DISP2_DAT1__UART3_TXD                  611
-MX51_PAD_DISP2_DAT1__USBH3_DIR                  612
-MX51_PAD_DISP2_DAT2__DISP2_DAT2                 613
-MX51_PAD_DISP2_DAT3__DISP2_DAT3                 614
-MX51_PAD_DISP2_DAT4__DISP2_DAT4                 615
-MX51_PAD_DISP2_DAT5__DISP2_DAT5                 616
-MX51_PAD_DISP2_DAT6__DISP2_DAT6                 617
-MX51_PAD_DISP2_DAT6__FEC_TDATA1                 618
-MX51_PAD_DISP2_DAT6__GPIO1_19                   619
-MX51_PAD_DISP2_DAT6__KEY_ROW4                   620
-MX51_PAD_DISP2_DAT6__USBH3_STP                  621
-MX51_PAD_DISP2_DAT7__DISP2_DAT7                 622
-MX51_PAD_DISP2_DAT7__FEC_TDATA2                 623
-MX51_PAD_DISP2_DAT7__GPIO1_29                   624
-MX51_PAD_DISP2_DAT7__KEY_ROW5                   625
-MX51_PAD_DISP2_DAT7__USBH3_NXT                  626
-MX51_PAD_DISP2_DAT8__DISP2_DAT8                 627
-MX51_PAD_DISP2_DAT8__FEC_TDATA3                 628
-MX51_PAD_DISP2_DAT8__GPIO1_30                   629
-MX51_PAD_DISP2_DAT8__KEY_ROW6                   630
-MX51_PAD_DISP2_DAT8__USBH3_DATA0                631
-MX51_PAD_DISP2_DAT9__AUD6_RXC                   632
-MX51_PAD_DISP2_DAT9__DISP2_DAT9                 633
-MX51_PAD_DISP2_DAT9__FEC_TX_EN                  634
-MX51_PAD_DISP2_DAT9__GPIO1_31                   635
-MX51_PAD_DISP2_DAT9__USBH3_DATA1                636
-MX51_PAD_DISP2_DAT10__DISP2_DAT10               637
-MX51_PAD_DISP2_DAT10__DISP2_SER_CS              638
-MX51_PAD_DISP2_DAT10__FEC_COL                   639
-MX51_PAD_DISP2_DAT10__KEY_ROW7                  640
-MX51_PAD_DISP2_DAT10__USBH3_DATA2               641
-MX51_PAD_DISP2_DAT11__AUD6_TXD                  642
-MX51_PAD_DISP2_DAT11__DISP2_DAT11               643
-MX51_PAD_DISP2_DAT11__FEC_RX_CLK                644
-MX51_PAD_DISP2_DAT11__GPIO1_10                  645
-MX51_PAD_DISP2_DAT11__USBH3_DATA3               646
-MX51_PAD_DISP2_DAT12__AUD6_RXD                  647
-MX51_PAD_DISP2_DAT12__DISP2_DAT12               648
-MX51_PAD_DISP2_DAT12__FEC_RX_DV                 649
-MX51_PAD_DISP2_DAT12__USBH3_DATA4               650
-MX51_PAD_DISP2_DAT13__AUD6_TXC                  651
-MX51_PAD_DISP2_DAT13__DISP2_DAT13               652
-MX51_PAD_DISP2_DAT13__FEC_TX_CLK                653
-MX51_PAD_DISP2_DAT13__USBH3_DATA5               654
-MX51_PAD_DISP2_DAT14__AUD6_TXFS                 655
-MX51_PAD_DISP2_DAT14__DISP2_DAT14               656
-MX51_PAD_DISP2_DAT14__FEC_RDATA0                657
-MX51_PAD_DISP2_DAT14__USBH3_DATA6               658
-MX51_PAD_DISP2_DAT15__AUD6_RXFS                 659
-MX51_PAD_DISP2_DAT15__DISP1_SER_CS              660
-MX51_PAD_DISP2_DAT15__DISP2_DAT15               661
-MX51_PAD_DISP2_DAT15__FEC_TDATA0                662
-MX51_PAD_DISP2_DAT15__USBH3_DATA7               663
-MX51_PAD_SD1_CMD__AUD5_RXFS                     664
-MX51_PAD_SD1_CMD__CSPI_MOSI                     665
-MX51_PAD_SD1_CMD__SD1_CMD                       666
-MX51_PAD_SD1_CLK__AUD5_RXC                      667
-MX51_PAD_SD1_CLK__CSPI_SCLK                     668
-MX51_PAD_SD1_CLK__SD1_CLK                       669
-MX51_PAD_SD1_DATA0__AUD5_TXD                    670
-MX51_PAD_SD1_DATA0__CSPI_MISO                   671
-MX51_PAD_SD1_DATA0__SD1_DATA0                   672
-MX51_PAD_EIM_DA0__EIM_DA0                       673
-MX51_PAD_EIM_DA1__EIM_DA1                       674
-MX51_PAD_EIM_DA2__EIM_DA2                       675
-MX51_PAD_EIM_DA3__EIM_DA3                       676
-MX51_PAD_SD1_DATA1__AUD5_RXD                    677
-MX51_PAD_SD1_DATA1__SD1_DATA1                   678
-MX51_PAD_EIM_DA4__EIM_DA4                       679
-MX51_PAD_EIM_DA5__EIM_DA5                       680
-MX51_PAD_EIM_DA6__EIM_DA6                       681
-MX51_PAD_EIM_DA7__EIM_DA7                       682
-MX51_PAD_SD1_DATA2__AUD5_TXC                    683
-MX51_PAD_SD1_DATA2__SD1_DATA2                   684
-MX51_PAD_EIM_DA10__EIM_DA10                     685
-MX51_PAD_EIM_DA11__EIM_DA11                     686
-MX51_PAD_EIM_DA8__EIM_DA8                       687
-MX51_PAD_EIM_DA9__EIM_DA9                       688
-MX51_PAD_SD1_DATA3__AUD5_TXFS                   689
-MX51_PAD_SD1_DATA3__CSPI_SS1                    690
-MX51_PAD_SD1_DATA3__SD1_DATA3                   691
-MX51_PAD_GPIO1_0__CSPI_SS2                      692
-MX51_PAD_GPIO1_0__GPIO1_0                       693
-MX51_PAD_GPIO1_0__SD1_CD                        694
-MX51_PAD_GPIO1_1__CSPI_MISO                     695
-MX51_PAD_GPIO1_1__GPIO1_1                       696
-MX51_PAD_GPIO1_1__SD1_WP                        697
-MX51_PAD_EIM_DA12__EIM_DA12                     698
-MX51_PAD_EIM_DA13__EIM_DA13                     699
-MX51_PAD_EIM_DA14__EIM_DA14                     700
-MX51_PAD_EIM_DA15__EIM_DA15                     701
-MX51_PAD_SD2_CMD__CSPI_MOSI                     702
-MX51_PAD_SD2_CMD__I2C1_SCL                      703
-MX51_PAD_SD2_CMD__SD2_CMD                       704
-MX51_PAD_SD2_CLK__CSPI_SCLK                     705
-MX51_PAD_SD2_CLK__I2C1_SDA                      706
-MX51_PAD_SD2_CLK__SD2_CLK                       707
-MX51_PAD_SD2_DATA0__CSPI_MISO                   708
-MX51_PAD_SD2_DATA0__SD1_DAT4                    709
-MX51_PAD_SD2_DATA0__SD2_DATA0                   710
-MX51_PAD_SD2_DATA1__SD1_DAT5                    711
-MX51_PAD_SD2_DATA1__SD2_DATA1                   712
-MX51_PAD_SD2_DATA1__USBH3_H2_DP                 713
-MX51_PAD_SD2_DATA2__SD1_DAT6                    714
-MX51_PAD_SD2_DATA2__SD2_DATA2                   715
-MX51_PAD_SD2_DATA2__USBH3_H2_DM                 716
-MX51_PAD_SD2_DATA3__CSPI_SS2                    717
-MX51_PAD_SD2_DATA3__SD1_DAT7                    718
-MX51_PAD_SD2_DATA3__SD2_DATA3                   719
-MX51_PAD_GPIO1_2__CCM_OUT_2                     720
-MX51_PAD_GPIO1_2__GPIO1_2                       721
-MX51_PAD_GPIO1_2__I2C2_SCL                      722
-MX51_PAD_GPIO1_2__PLL1_BYP                      723
-MX51_PAD_GPIO1_2__PWM1_PWMO                     724
-MX51_PAD_GPIO1_3__GPIO1_3                       725
-MX51_PAD_GPIO1_3__I2C2_SDA                      726
-MX51_PAD_GPIO1_3__PLL2_BYP                      727
-MX51_PAD_GPIO1_3__PWM2_PWMO                     728
-MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ             729
-MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B           730
-MX51_PAD_GPIO1_4__DISP2_EXT_CLK                 731
-MX51_PAD_GPIO1_4__EIM_RDY                       732
-MX51_PAD_GPIO1_4__GPIO1_4                       733
-MX51_PAD_GPIO1_4__WDOG1_WDOG_B                  734
-MX51_PAD_GPIO1_5__CSI2_MCLK                     735
-MX51_PAD_GPIO1_5__DISP2_PIN16                   736
-MX51_PAD_GPIO1_5__GPIO1_5                       737
-MX51_PAD_GPIO1_5__WDOG2_WDOG_B                  738
-MX51_PAD_GPIO1_6__DISP2_PIN17                   739
-MX51_PAD_GPIO1_6__GPIO1_6                       740
-MX51_PAD_GPIO1_6__REF_EN_B                      741
-MX51_PAD_GPIO1_7__CCM_OUT_0                     742
-MX51_PAD_GPIO1_7__GPIO1_7                       743
-MX51_PAD_GPIO1_7__SD2_WP                        744
-MX51_PAD_GPIO1_7__SPDIF_OUT1                    745
-MX51_PAD_GPIO1_8__CSI2_DATA_EN                  746
-MX51_PAD_GPIO1_8__GPIO1_8                       747
-MX51_PAD_GPIO1_8__SD2_CD                        748
-MX51_PAD_GPIO1_8__USBH3_PWR                     749
-MX51_PAD_GPIO1_9__CCM_OUT_1                     750
-MX51_PAD_GPIO1_9__DISP2_D1_CS                   751
-MX51_PAD_GPIO1_9__DISP2_SER_CS                  752
-MX51_PAD_GPIO1_9__GPIO1_9                       753
-MX51_PAD_GPIO1_9__SD2_LCTL                      754
-MX51_PAD_GPIO1_9__USBH3_OC                      755
+Refer to imx51-pinfunc.h in device tree source folder for all available
+imx51 PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx53-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx53-pinctrl.txt
index ca85ca432ef0..25dcb77cfaf7 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx53-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx53-pinctrl.txt
@@ -28,1175 +28,5 @@ PAD_CTL_DSE_MAX			(3 << 1)
 PAD_CTL_SRE_FAST                (1 << 0)
 PAD_CTL_SRE_SLOW                (0 << 0)
 
-See below for available PIN_FUNC_ID for imx53:
-MX53_PAD_GPIO_19__KPP_COL_5                             0
-MX53_PAD_GPIO_19__GPIO4_5                               1
-MX53_PAD_GPIO_19__CCM_CLKO                              2
-MX53_PAD_GPIO_19__SPDIF_OUT1                            3
-MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2                  4
-MX53_PAD_GPIO_19__ECSPI1_RDY                            5
-MX53_PAD_GPIO_19__FEC_TDATA_3                           6
-MX53_PAD_GPIO_19__SRC_INT_BOOT                          7
-MX53_PAD_KEY_COL0__KPP_COL_0                            8
-MX53_PAD_KEY_COL0__GPIO4_6                              9
-MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC                      10
-MX53_PAD_KEY_COL0__UART4_TXD_MUX                        11
-MX53_PAD_KEY_COL0__ECSPI1_SCLK                          12
-MX53_PAD_KEY_COL0__FEC_RDATA_3                          13
-MX53_PAD_KEY_COL0__SRC_ANY_PU_RST                       14
-MX53_PAD_KEY_ROW0__KPP_ROW_0                            15
-MX53_PAD_KEY_ROW0__GPIO4_7                              16
-MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD                      17
-MX53_PAD_KEY_ROW0__UART4_RXD_MUX                        18
-MX53_PAD_KEY_ROW0__ECSPI1_MOSI                          19
-MX53_PAD_KEY_ROW0__FEC_TX_ER                            20
-MX53_PAD_KEY_COL1__KPP_COL_1                            21
-MX53_PAD_KEY_COL1__GPIO4_8                              22
-MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS                     23
-MX53_PAD_KEY_COL1__UART5_TXD_MUX                        24
-MX53_PAD_KEY_COL1__ECSPI1_MISO                          25
-MX53_PAD_KEY_COL1__FEC_RX_CLK                           26
-MX53_PAD_KEY_COL1__USBPHY1_TXREADY                      27
-MX53_PAD_KEY_ROW1__KPP_ROW_1                            28
-MX53_PAD_KEY_ROW1__GPIO4_9                              29
-MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD                      30
-MX53_PAD_KEY_ROW1__UART5_RXD_MUX                        31
-MX53_PAD_KEY_ROW1__ECSPI1_SS0                           32
-MX53_PAD_KEY_ROW1__FEC_COL                              33
-MX53_PAD_KEY_ROW1__USBPHY1_RXVALID                      34
-MX53_PAD_KEY_COL2__KPP_COL_2                            35
-MX53_PAD_KEY_COL2__GPIO4_10                             36
-MX53_PAD_KEY_COL2__CAN1_TXCAN                           37
-MX53_PAD_KEY_COL2__FEC_MDIO                             38
-MX53_PAD_KEY_COL2__ECSPI1_SS1                           39
-MX53_PAD_KEY_COL2__FEC_RDATA_2                          40
-MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE                     41
-MX53_PAD_KEY_ROW2__KPP_ROW_2                            42
-MX53_PAD_KEY_ROW2__GPIO4_11                             43
-MX53_PAD_KEY_ROW2__CAN1_RXCAN                           44
-MX53_PAD_KEY_ROW2__FEC_MDC                              45
-MX53_PAD_KEY_ROW2__ECSPI1_SS2                           46
-MX53_PAD_KEY_ROW2__FEC_TDATA_2                          47
-MX53_PAD_KEY_ROW2__USBPHY1_RXERROR                      48
-MX53_PAD_KEY_COL3__KPP_COL_3                            49
-MX53_PAD_KEY_COL3__GPIO4_12                             50
-MX53_PAD_KEY_COL3__USBOH3_H2_DP                         51
-MX53_PAD_KEY_COL3__SPDIF_IN1                            52
-MX53_PAD_KEY_COL3__I2C2_SCL                             53
-MX53_PAD_KEY_COL3__ECSPI1_SS3                           54
-MX53_PAD_KEY_COL3__FEC_CRS                              55
-MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK                     56
-MX53_PAD_KEY_ROW3__KPP_ROW_3                            57
-MX53_PAD_KEY_ROW3__GPIO4_13                             58
-MX53_PAD_KEY_ROW3__USBOH3_H2_DM                         59
-MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK                     60
-MX53_PAD_KEY_ROW3__I2C2_SDA                             61
-MX53_PAD_KEY_ROW3__OSC32K_32K_OUT                       62
-MX53_PAD_KEY_ROW3__CCM_PLL4_BYP                         63
-MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0                  64
-MX53_PAD_KEY_COL4__KPP_COL_4                            65
-MX53_PAD_KEY_COL4__GPIO4_14                             66
-MX53_PAD_KEY_COL4__CAN2_TXCAN                           67
-MX53_PAD_KEY_COL4__IPU_SISG_4                           68
-MX53_PAD_KEY_COL4__UART5_RTS                            69
-MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC                     70
-MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1                  71
-MX53_PAD_KEY_ROW4__KPP_ROW_4                            72
-MX53_PAD_KEY_ROW4__GPIO4_15                             73
-MX53_PAD_KEY_ROW4__CAN2_RXCAN                           74
-MX53_PAD_KEY_ROW4__IPU_SISG_5                           75
-MX53_PAD_KEY_ROW4__UART5_CTS                            76
-MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR                    77
-MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID                    78
-MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK                 79
-MX53_PAD_DI0_DISP_CLK__GPIO4_16                         80
-MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR                 81
-MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0          82
-MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0                  83
-MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID                   84
-MX53_PAD_DI0_PIN15__IPU_DI0_PIN15                       85
-MX53_PAD_DI0_PIN15__GPIO4_17                            86
-MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC                     87
-MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1             88
-MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1                     89
-MX53_PAD_DI0_PIN15__USBPHY1_BVALID                      90
-MX53_PAD_DI0_PIN2__IPU_DI0_PIN2                         91
-MX53_PAD_DI0_PIN2__GPIO4_18                             92
-MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD                      93
-MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2              94
-MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2                      95
-MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION                   96
-MX53_PAD_DI0_PIN3__IPU_DI0_PIN3                         97
-MX53_PAD_DI0_PIN3__GPIO4_19                             98
-MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS                     99
-MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3              100
-MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3                      101
-MX53_PAD_DI0_PIN3__USBPHY1_IDDIG                        102
-MX53_PAD_DI0_PIN4__IPU_DI0_PIN4                         103
-MX53_PAD_DI0_PIN4__GPIO4_20                             104
-MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD                      105
-MX53_PAD_DI0_PIN4__ESDHC1_WP                            106
-MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD                     107
-MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4                      108
-MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT               109
-MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0                    110
-MX53_PAD_DISP0_DAT0__GPIO4_21                           111
-MX53_PAD_DISP0_DAT0__CSPI_SCLK                          112
-MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0                113
-MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN                114
-MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5                    115
-MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY                    116
-MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1                    117
-MX53_PAD_DISP0_DAT1__GPIO4_22                           118
-MX53_PAD_DISP0_DAT1__CSPI_MOSI                          119
-MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1                120
-MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL       121
-MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6                    122
-MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID                    123
-MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2                    124
-MX53_PAD_DISP0_DAT2__GPIO4_23                           125
-MX53_PAD_DISP0_DAT2__CSPI_MISO                          126
-MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2                127
-MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE                    128
-MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7                    129
-MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE                   130
-MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3                    131
-MX53_PAD_DISP0_DAT3__GPIO4_24                           132
-MX53_PAD_DISP0_DAT3__CSPI_SS0                           133
-MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3                134
-MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR               135
-MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8                    136
-MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR                    137
-MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4                    138
-MX53_PAD_DISP0_DAT4__GPIO4_25                           139
-MX53_PAD_DISP0_DAT4__CSPI_SS1                           140
-MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4                141
-MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB                 142
-MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9                    143
-MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK                   144
-MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5                    145
-MX53_PAD_DISP0_DAT5__GPIO4_26                           146
-MX53_PAD_DISP0_DAT5__CSPI_SS2                           147
-MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5                148
-MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS           149
-MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10                   150
-MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0                151
-MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6                    152
-MX53_PAD_DISP0_DAT6__GPIO4_27                           153
-MX53_PAD_DISP0_DAT6__CSPI_SS3                           154
-MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6                155
-MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE          156
-MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11                   157
-MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1                158
-MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7                    159
-MX53_PAD_DISP0_DAT7__GPIO4_28                           160
-MX53_PAD_DISP0_DAT7__CSPI_RDY                           161
-MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7                162
-MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0         163
-MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12                   164
-MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID                  165
-MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8                    166
-MX53_PAD_DISP0_DAT8__GPIO4_29                           167
-MX53_PAD_DISP0_DAT8__PWM1_PWMO                          168
-MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B                       169
-MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1         170
-MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13                   171
-MX53_PAD_DISP0_DAT8__USBPHY2_AVALID                     172
-MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9                    173
-MX53_PAD_DISP0_DAT9__GPIO4_30                           174
-MX53_PAD_DISP0_DAT9__PWM2_PWMO                          175
-MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B                       176
-MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2         177
-MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14                   178
-MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0                  179
-MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10                  180
-MX53_PAD_DISP0_DAT10__GPIO4_31                          181
-MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP                  182
-MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3        183
-MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15                  184
-MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1                 185
-MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11                  186
-MX53_PAD_DISP0_DAT11__GPIO5_5                           187
-MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT                  188
-MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4        189
-MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16                  190
-MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2                 191
-MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12                  192
-MX53_PAD_DISP0_DAT12__GPIO5_6                           193
-MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK                  194
-MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5        195
-MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17                  196
-MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3                 197
-MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13                  198
-MX53_PAD_DISP0_DAT13__GPIO5_7                           199
-MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS                  200
-MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0        201
-MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18                  202
-MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4                 203
-MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14                  204
-MX53_PAD_DISP0_DAT14__GPIO5_8                           205
-MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC                   206
-MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1        207
-MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19                  208
-MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5                 209
-MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15                  210
-MX53_PAD_DISP0_DAT15__GPIO5_9                           211
-MX53_PAD_DISP0_DAT15__ECSPI1_SS1                        212
-MX53_PAD_DISP0_DAT15__ECSPI2_SS1                        213
-MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2        214
-MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20                  215
-MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6                 216
-MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16                  217
-MX53_PAD_DISP0_DAT16__GPIO5_10                          218
-MX53_PAD_DISP0_DAT16__ECSPI2_MOSI                       219
-MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC                   220
-MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0                  221
-MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3        222
-MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21                  223
-MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7                 224
-MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17                  225
-MX53_PAD_DISP0_DAT17__GPIO5_11                          226
-MX53_PAD_DISP0_DAT17__ECSPI2_MISO                       227
-MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD                   228
-MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1                  229
-MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4        230
-MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22                  231
-MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18                  232
-MX53_PAD_DISP0_DAT18__GPIO5_12                          233
-MX53_PAD_DISP0_DAT18__ECSPI2_SS0                        234
-MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS                  235
-MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS                  236
-MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5        237
-MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23                  238
-MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2                     239
-MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19                  240
-MX53_PAD_DISP0_DAT19__GPIO5_13                          241
-MX53_PAD_DISP0_DAT19__ECSPI2_SCLK                       242
-MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD                   243
-MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC                   244
-MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6        245
-MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24                  246
-MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3                     247
-MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20                  248
-MX53_PAD_DISP0_DAT20__GPIO5_14                          249
-MX53_PAD_DISP0_DAT20__ECSPI1_SCLK                       250
-MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC                   251
-MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7        252
-MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25                  253
-MX53_PAD_DISP0_DAT20__SATA_PHY_TDI                      254
-MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21                  255
-MX53_PAD_DISP0_DAT21__GPIO5_15                          256
-MX53_PAD_DISP0_DAT21__ECSPI1_MOSI                       257
-MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD                   258
-MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0           259
-MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26                  260
-MX53_PAD_DISP0_DAT21__SATA_PHY_TDO                      261
-MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22                  262
-MX53_PAD_DISP0_DAT22__GPIO5_16                          263
-MX53_PAD_DISP0_DAT22__ECSPI1_MISO                       264
-MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS                  265
-MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1           266
-MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27                  267
-MX53_PAD_DISP0_DAT22__SATA_PHY_TCK                      268
-MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23                  269
-MX53_PAD_DISP0_DAT23__GPIO5_17                          270
-MX53_PAD_DISP0_DAT23__ECSPI1_SS0                        271
-MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD                   272
-MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2           273
-MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28                  274
-MX53_PAD_DISP0_DAT23__SATA_PHY_TMS                      275
-MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK                   276
-MX53_PAD_CSI0_PIXCLK__GPIO5_18                          277
-MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0                   278
-MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29                  279
-MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC                      280
-MX53_PAD_CSI0_MCLK__GPIO5_19                            281
-MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK                       282
-MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1                     283
-MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30                    284
-MX53_PAD_CSI0_MCLK__TPIU_TRCTL                          285
-MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN                 286
-MX53_PAD_CSI0_DATA_EN__GPIO5_20                         287
-MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2                  288
-MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31                 289
-MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK                       290
-MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC                     291
-MX53_PAD_CSI0_VSYNC__GPIO5_21                           292
-MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3                    293
-MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32                   294
-MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0                       295
-MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4                        296
-MX53_PAD_CSI0_DAT4__GPIO5_22                            297
-MX53_PAD_CSI0_DAT4__KPP_COL_5                           298
-MX53_PAD_CSI0_DAT4__ECSPI1_SCLK                         299
-MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP                    300
-MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC                     301
-MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33                    302
-MX53_PAD_CSI0_DAT4__TPIU_TRACE_1                        303
-MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5                        304
-MX53_PAD_CSI0_DAT5__GPIO5_23                            305
-MX53_PAD_CSI0_DAT5__KPP_ROW_5                           306
-MX53_PAD_CSI0_DAT5__ECSPI1_MOSI                         307
-MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT                    308
-MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD                     309
-MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34                    310
-MX53_PAD_CSI0_DAT5__TPIU_TRACE_2                        311
-MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6                        312
-MX53_PAD_CSI0_DAT6__GPIO5_24                            313
-MX53_PAD_CSI0_DAT6__KPP_COL_6                           314
-MX53_PAD_CSI0_DAT6__ECSPI1_MISO                         315
-MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK                    316
-MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS                    317
-MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35                    318
-MX53_PAD_CSI0_DAT6__TPIU_TRACE_3                        319
-MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7                        320
-MX53_PAD_CSI0_DAT7__GPIO5_25                            321
-MX53_PAD_CSI0_DAT7__KPP_ROW_6                           322
-MX53_PAD_CSI0_DAT7__ECSPI1_SS0                          323
-MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR                    324
-MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD                     325
-MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36                    326
-MX53_PAD_CSI0_DAT7__TPIU_TRACE_4                        327
-MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8                        328
-MX53_PAD_CSI0_DAT8__GPIO5_26                            329
-MX53_PAD_CSI0_DAT8__KPP_COL_7                           330
-MX53_PAD_CSI0_DAT8__ECSPI2_SCLK                         331
-MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC                     332
-MX53_PAD_CSI0_DAT8__I2C1_SDA                            333
-MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37                    334
-MX53_PAD_CSI0_DAT8__TPIU_TRACE_5                        335
-MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9                        336
-MX53_PAD_CSI0_DAT9__GPIO5_27                            337
-MX53_PAD_CSI0_DAT9__KPP_ROW_7                           338
-MX53_PAD_CSI0_DAT9__ECSPI2_MOSI                         339
-MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR                    340
-MX53_PAD_CSI0_DAT9__I2C1_SCL                            341
-MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38                    342
-MX53_PAD_CSI0_DAT9__TPIU_TRACE_6                        343
-MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10                      344
-MX53_PAD_CSI0_DAT10__GPIO5_28                           345
-MX53_PAD_CSI0_DAT10__UART1_TXD_MUX                      346
-MX53_PAD_CSI0_DAT10__ECSPI2_MISO                        347
-MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC                    348
-MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4                    349
-MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39                   350
-MX53_PAD_CSI0_DAT10__TPIU_TRACE_7                       351
-MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11                      352
-MX53_PAD_CSI0_DAT11__GPIO5_29                           353
-MX53_PAD_CSI0_DAT11__UART1_RXD_MUX                      354
-MX53_PAD_CSI0_DAT11__ECSPI2_SS0                         355
-MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS                   356
-MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5                    357
-MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40                   358
-MX53_PAD_CSI0_DAT11__TPIU_TRACE_8                       359
-MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12                      360
-MX53_PAD_CSI0_DAT12__GPIO5_30                           361
-MX53_PAD_CSI0_DAT12__UART4_TXD_MUX                      362
-MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0                363
-MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6                    364
-MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41                   365
-MX53_PAD_CSI0_DAT12__TPIU_TRACE_9                       366
-MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13                      367
-MX53_PAD_CSI0_DAT13__GPIO5_31                           368
-MX53_PAD_CSI0_DAT13__UART4_RXD_MUX                      369
-MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1                370
-MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7                    371
-MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42                   372
-MX53_PAD_CSI0_DAT13__TPIU_TRACE_10                      373
-MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14                      374
-MX53_PAD_CSI0_DAT14__GPIO6_0                            375
-MX53_PAD_CSI0_DAT14__UART5_TXD_MUX                      376
-MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2                377
-MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8                    378
-MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43                   379
-MX53_PAD_CSI0_DAT14__TPIU_TRACE_11                      380
-MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15                      381
-MX53_PAD_CSI0_DAT15__GPIO6_1                            382
-MX53_PAD_CSI0_DAT15__UART5_RXD_MUX                      383
-MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3                384
-MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9                    385
-MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44                   386
-MX53_PAD_CSI0_DAT15__TPIU_TRACE_12                      387
-MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16                      388
-MX53_PAD_CSI0_DAT16__GPIO6_2                            389
-MX53_PAD_CSI0_DAT16__UART4_RTS                          390
-MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4                391
-MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10                   392
-MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45                   393
-MX53_PAD_CSI0_DAT16__TPIU_TRACE_13                      394
-MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17                      395
-MX53_PAD_CSI0_DAT17__GPIO6_3                            396
-MX53_PAD_CSI0_DAT17__UART4_CTS                          397
-MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5                398
-MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11                   399
-MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46                   400
-MX53_PAD_CSI0_DAT17__TPIU_TRACE_14                      401
-MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18                      402
-MX53_PAD_CSI0_DAT18__GPIO6_4                            403
-MX53_PAD_CSI0_DAT18__UART5_RTS                          404
-MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6                405
-MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12                   406
-MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47                   407
-MX53_PAD_CSI0_DAT18__TPIU_TRACE_15                      408
-MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19                      409
-MX53_PAD_CSI0_DAT19__GPIO6_5                            410
-MX53_PAD_CSI0_DAT19__UART5_CTS                          411
-MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7                412
-MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13                   413
-MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48                   414
-MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK                     415
-MX53_PAD_EIM_A25__EMI_WEIM_A_25                         416
-MX53_PAD_EIM_A25__GPIO5_2                               417
-MX53_PAD_EIM_A25__ECSPI2_RDY                            418
-MX53_PAD_EIM_A25__IPU_DI1_PIN12                         419
-MX53_PAD_EIM_A25__CSPI_SS1                              420
-MX53_PAD_EIM_A25__IPU_DI0_D1_CS                         421
-MX53_PAD_EIM_A25__USBPHY1_BISTOK                        422
-MX53_PAD_EIM_EB2__EMI_WEIM_EB_2                         423
-MX53_PAD_EIM_EB2__GPIO2_30                              424
-MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK                       425
-MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS                      426
-MX53_PAD_EIM_EB2__ECSPI1_SS0                            427
-MX53_PAD_EIM_EB2__I2C2_SCL                              428
-MX53_PAD_EIM_D16__EMI_WEIM_D_16                         429
-MX53_PAD_EIM_D16__GPIO3_16                              430
-MX53_PAD_EIM_D16__IPU_DI0_PIN5                          431
-MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK                    432
-MX53_PAD_EIM_D16__ECSPI1_SCLK                           433
-MX53_PAD_EIM_D16__I2C2_SDA                              434
-MX53_PAD_EIM_D17__EMI_WEIM_D_17                         435
-MX53_PAD_EIM_D17__GPIO3_17                              436
-MX53_PAD_EIM_D17__IPU_DI0_PIN6                          437
-MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN                    438
-MX53_PAD_EIM_D17__ECSPI1_MISO                           439
-MX53_PAD_EIM_D17__I2C3_SCL                              440
-MX53_PAD_EIM_D18__EMI_WEIM_D_18                         441
-MX53_PAD_EIM_D18__GPIO3_18                              442
-MX53_PAD_EIM_D18__IPU_DI0_PIN7                          443
-MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO                    444
-MX53_PAD_EIM_D18__ECSPI1_MOSI                           445
-MX53_PAD_EIM_D18__I2C3_SDA                              446
-MX53_PAD_EIM_D18__IPU_DI1_D0_CS                         447
-MX53_PAD_EIM_D19__EMI_WEIM_D_19                         448
-MX53_PAD_EIM_D19__GPIO3_19                              449
-MX53_PAD_EIM_D19__IPU_DI0_PIN8                          450
-MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS                     451
-MX53_PAD_EIM_D19__ECSPI1_SS1                            452
-MX53_PAD_EIM_D19__EPIT1_EPITO                           453
-MX53_PAD_EIM_D19__UART1_CTS                             454
-MX53_PAD_EIM_D19__USBOH3_USBH2_OC                       455
-MX53_PAD_EIM_D20__EMI_WEIM_D_20                         456
-MX53_PAD_EIM_D20__GPIO3_20                              457
-MX53_PAD_EIM_D20__IPU_DI0_PIN16                         458
-MX53_PAD_EIM_D20__IPU_SER_DISP0_CS                      459
-MX53_PAD_EIM_D20__CSPI_SS0                              460
-MX53_PAD_EIM_D20__EPIT2_EPITO                           461
-MX53_PAD_EIM_D20__UART1_RTS                             462
-MX53_PAD_EIM_D20__USBOH3_USBH2_PWR                      463
-MX53_PAD_EIM_D21__EMI_WEIM_D_21                         464
-MX53_PAD_EIM_D21__GPIO3_21                              465
-MX53_PAD_EIM_D21__IPU_DI0_PIN17                         466
-MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK                    467
-MX53_PAD_EIM_D21__CSPI_SCLK                             468
-MX53_PAD_EIM_D21__I2C1_SCL                              469
-MX53_PAD_EIM_D21__USBOH3_USBOTG_OC                      470
-MX53_PAD_EIM_D22__EMI_WEIM_D_22                         471
-MX53_PAD_EIM_D22__GPIO3_22                              472
-MX53_PAD_EIM_D22__IPU_DI0_PIN1                          473
-MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN                    474
-MX53_PAD_EIM_D22__CSPI_MISO                             475
-MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR                     476
-MX53_PAD_EIM_D23__EMI_WEIM_D_23                         477
-MX53_PAD_EIM_D23__GPIO3_23                              478
-MX53_PAD_EIM_D23__UART3_CTS                             479
-MX53_PAD_EIM_D23__UART1_DCD                             480
-MX53_PAD_EIM_D23__IPU_DI0_D0_CS                         481
-MX53_PAD_EIM_D23__IPU_DI1_PIN2                          482
-MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN                      483
-MX53_PAD_EIM_D23__IPU_DI1_PIN14                         484
-MX53_PAD_EIM_EB3__EMI_WEIM_EB_3                         485
-MX53_PAD_EIM_EB3__GPIO2_31                              486
-MX53_PAD_EIM_EB3__UART3_RTS                             487
-MX53_PAD_EIM_EB3__UART1_RI                              488
-MX53_PAD_EIM_EB3__IPU_DI1_PIN3                          489
-MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC                        490
-MX53_PAD_EIM_EB3__IPU_DI1_PIN16                         491
-MX53_PAD_EIM_D24__EMI_WEIM_D_24                         492
-MX53_PAD_EIM_D24__GPIO3_24                              493
-MX53_PAD_EIM_D24__UART3_TXD_MUX                         494
-MX53_PAD_EIM_D24__ECSPI1_SS2                            495
-MX53_PAD_EIM_D24__CSPI_SS2                              496
-MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS                      497
-MX53_PAD_EIM_D24__ECSPI2_SS2                            498
-MX53_PAD_EIM_D24__UART1_DTR                             499
-MX53_PAD_EIM_D25__EMI_WEIM_D_25                         500
-MX53_PAD_EIM_D25__GPIO3_25                              501
-MX53_PAD_EIM_D25__UART3_RXD_MUX                         502
-MX53_PAD_EIM_D25__ECSPI1_SS3                            503
-MX53_PAD_EIM_D25__CSPI_SS3                              504
-MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC                       505
-MX53_PAD_EIM_D25__ECSPI2_SS3                            506
-MX53_PAD_EIM_D25__UART1_DSR                             507
-MX53_PAD_EIM_D26__EMI_WEIM_D_26                         508
-MX53_PAD_EIM_D26__GPIO3_26                              509
-MX53_PAD_EIM_D26__UART2_TXD_MUX                         510
-MX53_PAD_EIM_D26__FIRI_RXD                              511
-MX53_PAD_EIM_D26__IPU_CSI0_D_1                          512
-MX53_PAD_EIM_D26__IPU_DI1_PIN11                         513
-MX53_PAD_EIM_D26__IPU_SISG_2                            514
-MX53_PAD_EIM_D26__IPU_DISP1_DAT_22                      515
-MX53_PAD_EIM_D27__EMI_WEIM_D_27                         516
-MX53_PAD_EIM_D27__GPIO3_27                              517
-MX53_PAD_EIM_D27__UART2_RXD_MUX                         518
-MX53_PAD_EIM_D27__FIRI_TXD                              519
-MX53_PAD_EIM_D27__IPU_CSI0_D_0                          520
-MX53_PAD_EIM_D27__IPU_DI1_PIN13                         521
-MX53_PAD_EIM_D27__IPU_SISG_3                            522
-MX53_PAD_EIM_D27__IPU_DISP1_DAT_23                      523
-MX53_PAD_EIM_D28__EMI_WEIM_D_28                         524
-MX53_PAD_EIM_D28__GPIO3_28                              525
-MX53_PAD_EIM_D28__UART2_CTS                             526
-MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO                    527
-MX53_PAD_EIM_D28__CSPI_MOSI                             528
-MX53_PAD_EIM_D28__I2C1_SDA                              529
-MX53_PAD_EIM_D28__IPU_EXT_TRIG                          530
-MX53_PAD_EIM_D28__IPU_DI0_PIN13                         531
-MX53_PAD_EIM_D29__EMI_WEIM_D_29                         532
-MX53_PAD_EIM_D29__GPIO3_29                              533
-MX53_PAD_EIM_D29__UART2_RTS                             534
-MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS                     535
-MX53_PAD_EIM_D29__CSPI_SS0                              536
-MX53_PAD_EIM_D29__IPU_DI1_PIN15                         537
-MX53_PAD_EIM_D29__IPU_CSI1_VSYNC                        538
-MX53_PAD_EIM_D29__IPU_DI0_PIN14                         539
-MX53_PAD_EIM_D30__EMI_WEIM_D_30                         540
-MX53_PAD_EIM_D30__GPIO3_30                              541
-MX53_PAD_EIM_D30__UART3_CTS                             542
-MX53_PAD_EIM_D30__IPU_CSI0_D_3                          543
-MX53_PAD_EIM_D30__IPU_DI0_PIN11                         544
-MX53_PAD_EIM_D30__IPU_DISP1_DAT_21                      545
-MX53_PAD_EIM_D30__USBOH3_USBH1_OC                       546
-MX53_PAD_EIM_D30__USBOH3_USBH2_OC                       547
-MX53_PAD_EIM_D31__EMI_WEIM_D_31                         548
-MX53_PAD_EIM_D31__GPIO3_31                              549
-MX53_PAD_EIM_D31__UART3_RTS                             550
-MX53_PAD_EIM_D31__IPU_CSI0_D_2                          551
-MX53_PAD_EIM_D31__IPU_DI0_PIN12                         552
-MX53_PAD_EIM_D31__IPU_DISP1_DAT_20                      553
-MX53_PAD_EIM_D31__USBOH3_USBH1_PWR                      554
-MX53_PAD_EIM_D31__USBOH3_USBH2_PWR                      555
-MX53_PAD_EIM_A24__EMI_WEIM_A_24                         556
-MX53_PAD_EIM_A24__GPIO5_4                               557
-MX53_PAD_EIM_A24__IPU_DISP1_DAT_19                      558
-MX53_PAD_EIM_A24__IPU_CSI1_D_19                         559
-MX53_PAD_EIM_A24__IPU_SISG_2                            560
-MX53_PAD_EIM_A24__USBPHY2_BVALID                        561
-MX53_PAD_EIM_A23__EMI_WEIM_A_23                         562
-MX53_PAD_EIM_A23__GPIO6_6                               563
-MX53_PAD_EIM_A23__IPU_DISP1_DAT_18                      564
-MX53_PAD_EIM_A23__IPU_CSI1_D_18                         565
-MX53_PAD_EIM_A23__IPU_SISG_3                            566
-MX53_PAD_EIM_A23__USBPHY2_ENDSESSION                    567
-MX53_PAD_EIM_A22__EMI_WEIM_A_22                         568
-MX53_PAD_EIM_A22__GPIO2_16                              569
-MX53_PAD_EIM_A22__IPU_DISP1_DAT_17                      570
-MX53_PAD_EIM_A22__IPU_CSI1_D_17                         571
-MX53_PAD_EIM_A22__SRC_BT_CFG1_7                         572
-MX53_PAD_EIM_A21__EMI_WEIM_A_21                         573
-MX53_PAD_EIM_A21__GPIO2_17                              574
-MX53_PAD_EIM_A21__IPU_DISP1_DAT_16                      575
-MX53_PAD_EIM_A21__IPU_CSI1_D_16                         576
-MX53_PAD_EIM_A21__SRC_BT_CFG1_6                         577
-MX53_PAD_EIM_A20__EMI_WEIM_A_20                         578
-MX53_PAD_EIM_A20__GPIO2_18                              579
-MX53_PAD_EIM_A20__IPU_DISP1_DAT_15                      580
-MX53_PAD_EIM_A20__IPU_CSI1_D_15                         581
-MX53_PAD_EIM_A20__SRC_BT_CFG1_5                         582
-MX53_PAD_EIM_A19__EMI_WEIM_A_19                         583
-MX53_PAD_EIM_A19__GPIO2_19                              584
-MX53_PAD_EIM_A19__IPU_DISP1_DAT_14                      585
-MX53_PAD_EIM_A19__IPU_CSI1_D_14                         586
-MX53_PAD_EIM_A19__SRC_BT_CFG1_4                         587
-MX53_PAD_EIM_A18__EMI_WEIM_A_18                         588
-MX53_PAD_EIM_A18__GPIO2_20                              589
-MX53_PAD_EIM_A18__IPU_DISP1_DAT_13                      590
-MX53_PAD_EIM_A18__IPU_CSI1_D_13                         591
-MX53_PAD_EIM_A18__SRC_BT_CFG1_3                         592
-MX53_PAD_EIM_A17__EMI_WEIM_A_17                         593
-MX53_PAD_EIM_A17__GPIO2_21                              594
-MX53_PAD_EIM_A17__IPU_DISP1_DAT_12                      595
-MX53_PAD_EIM_A17__IPU_CSI1_D_12                         596
-MX53_PAD_EIM_A17__SRC_BT_CFG1_2                         597
-MX53_PAD_EIM_A16__EMI_WEIM_A_16                         598
-MX53_PAD_EIM_A16__GPIO2_22                              599
-MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK                      600
-MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK                       601
-MX53_PAD_EIM_A16__SRC_BT_CFG1_1                         602
-MX53_PAD_EIM_CS0__EMI_WEIM_CS_0                         603
-MX53_PAD_EIM_CS0__GPIO2_23                              604
-MX53_PAD_EIM_CS0__ECSPI2_SCLK                           605
-MX53_PAD_EIM_CS0__IPU_DI1_PIN5                          606
-MX53_PAD_EIM_CS1__EMI_WEIM_CS_1                         607
-MX53_PAD_EIM_CS1__GPIO2_24                              608
-MX53_PAD_EIM_CS1__ECSPI2_MOSI                           609
-MX53_PAD_EIM_CS1__IPU_DI1_PIN6                          610
-MX53_PAD_EIM_OE__EMI_WEIM_OE                            611
-MX53_PAD_EIM_OE__GPIO2_25                               612
-MX53_PAD_EIM_OE__ECSPI2_MISO                            613
-MX53_PAD_EIM_OE__IPU_DI1_PIN7                           614
-MX53_PAD_EIM_OE__USBPHY2_IDDIG                          615
-MX53_PAD_EIM_RW__EMI_WEIM_RW                            616
-MX53_PAD_EIM_RW__GPIO2_26                               617
-MX53_PAD_EIM_RW__ECSPI2_SS0                             618
-MX53_PAD_EIM_RW__IPU_DI1_PIN8                           619
-MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT                 620
-MX53_PAD_EIM_LBA__EMI_WEIM_LBA                          621
-MX53_PAD_EIM_LBA__GPIO2_27                              622
-MX53_PAD_EIM_LBA__ECSPI2_SS1                            623
-MX53_PAD_EIM_LBA__IPU_DI1_PIN17                         624
-MX53_PAD_EIM_LBA__SRC_BT_CFG1_0                         625
-MX53_PAD_EIM_EB0__EMI_WEIM_EB_0                         626
-MX53_PAD_EIM_EB0__GPIO2_28                              627
-MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11                      628
-MX53_PAD_EIM_EB0__IPU_CSI1_D_11                         629
-MX53_PAD_EIM_EB0__GPC_PMIC_RDY                          630
-MX53_PAD_EIM_EB0__SRC_BT_CFG2_7                         631
-MX53_PAD_EIM_EB1__EMI_WEIM_EB_1                         632
-MX53_PAD_EIM_EB1__GPIO2_29                              633
-MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10                      634
-MX53_PAD_EIM_EB1__IPU_CSI1_D_10                         635
-MX53_PAD_EIM_EB1__SRC_BT_CFG2_6                         636
-MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0                    637
-MX53_PAD_EIM_DA0__GPIO3_0                               638
-MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9                       639
-MX53_PAD_EIM_DA0__IPU_CSI1_D_9                          640
-MX53_PAD_EIM_DA0__SRC_BT_CFG2_5                         641
-MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1                    642
-MX53_PAD_EIM_DA1__GPIO3_1                               643
-MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8                       644
-MX53_PAD_EIM_DA1__IPU_CSI1_D_8                          645
-MX53_PAD_EIM_DA1__SRC_BT_CFG2_4                         646
-MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2                    647
-MX53_PAD_EIM_DA2__GPIO3_2                               648
-MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7                       649
-MX53_PAD_EIM_DA2__IPU_CSI1_D_7                          650
-MX53_PAD_EIM_DA2__SRC_BT_CFG2_3                         651
-MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3                    652
-MX53_PAD_EIM_DA3__GPIO3_3                               653
-MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6                       654
-MX53_PAD_EIM_DA3__IPU_CSI1_D_6                          655
-MX53_PAD_EIM_DA3__SRC_BT_CFG2_2                         656
-MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4                    657
-MX53_PAD_EIM_DA4__GPIO3_4                               658
-MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5                       659
-MX53_PAD_EIM_DA4__IPU_CSI1_D_5                          660
-MX53_PAD_EIM_DA4__SRC_BT_CFG3_7                         661
-MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5                    662
-MX53_PAD_EIM_DA5__GPIO3_5                               663
-MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4                       664
-MX53_PAD_EIM_DA5__IPU_CSI1_D_4                          665
-MX53_PAD_EIM_DA5__SRC_BT_CFG3_6                         666
-MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6                    667
-MX53_PAD_EIM_DA6__GPIO3_6                               668
-MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3                       669
-MX53_PAD_EIM_DA6__IPU_CSI1_D_3                          670
-MX53_PAD_EIM_DA6__SRC_BT_CFG3_5                         671
-MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7                    672
-MX53_PAD_EIM_DA7__GPIO3_7                               673
-MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2                       674
-MX53_PAD_EIM_DA7__IPU_CSI1_D_2                          675
-MX53_PAD_EIM_DA7__SRC_BT_CFG3_4                         676
-MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8                    677
-MX53_PAD_EIM_DA8__GPIO3_8                               678
-MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1                       679
-MX53_PAD_EIM_DA8__IPU_CSI1_D_1                          680
-MX53_PAD_EIM_DA8__SRC_BT_CFG3_3                         681
-MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9                    682
-MX53_PAD_EIM_DA9__GPIO3_9                               683
-MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0                       684
-MX53_PAD_EIM_DA9__IPU_CSI1_D_0                          685
-MX53_PAD_EIM_DA9__SRC_BT_CFG3_2                         686
-MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10                  687
-MX53_PAD_EIM_DA10__GPIO3_10                             688
-MX53_PAD_EIM_DA10__IPU_DI1_PIN15                        689
-MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN                     690
-MX53_PAD_EIM_DA10__SRC_BT_CFG3_1                        691
-MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11                  692
-MX53_PAD_EIM_DA11__GPIO3_11                             693
-MX53_PAD_EIM_DA11__IPU_DI1_PIN2                         694
-MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC                       695
-MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12                  696
-MX53_PAD_EIM_DA12__GPIO3_12                             697
-MX53_PAD_EIM_DA12__IPU_DI1_PIN3                         698
-MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC                       699
-MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13                  700
-MX53_PAD_EIM_DA13__GPIO3_13                             701
-MX53_PAD_EIM_DA13__IPU_DI1_D0_CS                        702
-MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK                      703
-MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14                  704
-MX53_PAD_EIM_DA14__GPIO3_14                             705
-MX53_PAD_EIM_DA14__IPU_DI1_D1_CS                        706
-MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK                      707
-MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15                  708
-MX53_PAD_EIM_DA15__GPIO3_15                             709
-MX53_PAD_EIM_DA15__IPU_DI1_PIN1                         710
-MX53_PAD_EIM_DA15__IPU_DI1_PIN4                         711
-MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B                     712
-MX53_PAD_NANDF_WE_B__GPIO6_12                           713
-MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B                     714
-MX53_PAD_NANDF_RE_B__GPIO6_13                           715
-MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT                        716
-MX53_PAD_EIM_WAIT__GPIO5_0                              717
-MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B                     718
-MX53_PAD_LVDS1_TX3_P__GPIO6_22                          719
-MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3                     720
-MX53_PAD_LVDS1_TX2_P__GPIO6_24                          721
-MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2                     722
-MX53_PAD_LVDS1_CLK_P__GPIO6_26                          723
-MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK                     724
-MX53_PAD_LVDS1_TX1_P__GPIO6_28                          725
-MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1                     726
-MX53_PAD_LVDS1_TX0_P__GPIO6_30                          727
-MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0                     728
-MX53_PAD_LVDS0_TX3_P__GPIO7_22                          729
-MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3                     730
-MX53_PAD_LVDS0_CLK_P__GPIO7_24                          731
-MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK                     732
-MX53_PAD_LVDS0_TX2_P__GPIO7_26                          733
-MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2                     734
-MX53_PAD_LVDS0_TX1_P__GPIO7_28                          735
-MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1                     736
-MX53_PAD_LVDS0_TX0_P__GPIO7_30                          737
-MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0                     738
-MX53_PAD_GPIO_10__GPIO4_0                               739
-MX53_PAD_GPIO_10__OSC32k_32K_OUT                        740
-MX53_PAD_GPIO_11__GPIO4_1                               741
-MX53_PAD_GPIO_12__GPIO4_2                               742
-MX53_PAD_GPIO_13__GPIO4_3                               743
-MX53_PAD_GPIO_14__GPIO4_4                               744
-MX53_PAD_NANDF_CLE__EMI_NANDF_CLE                       745
-MX53_PAD_NANDF_CLE__GPIO6_7                             746
-MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0                   747
-MX53_PAD_NANDF_ALE__EMI_NANDF_ALE                       748
-MX53_PAD_NANDF_ALE__GPIO6_8                             749
-MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1                   750
-MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B                     751
-MX53_PAD_NANDF_WP_B__GPIO6_9                            752
-MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2                  753
-MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0                      754
-MX53_PAD_NANDF_RB0__GPIO6_10                            755
-MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3                   756
-MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0                      757
-MX53_PAD_NANDF_CS0__GPIO6_11                            758
-MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4                   759
-MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1                      760
-MX53_PAD_NANDF_CS1__GPIO6_14                            761
-MX53_PAD_NANDF_CS1__MLB_MLBCLK                          762
-MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5                   763
-MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2                      764
-MX53_PAD_NANDF_CS2__GPIO6_15                            765
-MX53_PAD_NANDF_CS2__IPU_SISG_0                          766
-MX53_PAD_NANDF_CS2__ESAI1_TX0                           767
-MX53_PAD_NANDF_CS2__EMI_WEIM_CRE                        768
-MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK                       769
-MX53_PAD_NANDF_CS2__MLB_MLBSIG                          770
-MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6                   771
-MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3                      772
-MX53_PAD_NANDF_CS3__GPIO6_16                            773
-MX53_PAD_NANDF_CS3__IPU_SISG_1                          774
-MX53_PAD_NANDF_CS3__ESAI1_TX1                           775
-MX53_PAD_NANDF_CS3__EMI_WEIM_A_26                       776
-MX53_PAD_NANDF_CS3__MLB_MLBDAT                          777
-MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7                   778
-MX53_PAD_FEC_MDIO__FEC_MDIO                             779
-MX53_PAD_FEC_MDIO__GPIO1_22                             780
-MX53_PAD_FEC_MDIO__ESAI1_SCKR                           781
-MX53_PAD_FEC_MDIO__FEC_COL                              782
-MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2                       783
-MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3              784
-MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49                     785
-MX53_PAD_FEC_REF_CLK__FEC_TX_CLK                        786
-MX53_PAD_FEC_REF_CLK__GPIO1_23                          787
-MX53_PAD_FEC_REF_CLK__ESAI1_FSR                         788
-MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4           789
-MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50                  790
-MX53_PAD_FEC_RX_ER__FEC_RX_ER                           791
-MX53_PAD_FEC_RX_ER__GPIO1_24                            792
-MX53_PAD_FEC_RX_ER__ESAI1_HCKR                          793
-MX53_PAD_FEC_RX_ER__FEC_RX_CLK                          794
-MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3                      795
-MX53_PAD_FEC_CRS_DV__FEC_RX_DV                          796
-MX53_PAD_FEC_CRS_DV__GPIO1_25                           797
-MX53_PAD_FEC_CRS_DV__ESAI1_SCKT                         798
-MX53_PAD_FEC_RXD1__FEC_RDATA_1                          799
-MX53_PAD_FEC_RXD1__GPIO1_26                             800
-MX53_PAD_FEC_RXD1__ESAI1_FST                            801
-MX53_PAD_FEC_RXD1__MLB_MLBSIG                           802
-MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1                       803
-MX53_PAD_FEC_RXD0__FEC_RDATA_0                          804
-MX53_PAD_FEC_RXD0__GPIO1_27                             805
-MX53_PAD_FEC_RXD0__ESAI1_HCKT                           806
-MX53_PAD_FEC_RXD0__OSC32k_32K_OUT                       807
-MX53_PAD_FEC_TX_EN__FEC_TX_EN                           808
-MX53_PAD_FEC_TX_EN__GPIO1_28                            809
-MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2                       810
-MX53_PAD_FEC_TXD1__FEC_TDATA_1                          811
-MX53_PAD_FEC_TXD1__GPIO1_29                             812
-MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3                        813
-MX53_PAD_FEC_TXD1__MLB_MLBCLK                           814
-MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK                  815
-MX53_PAD_FEC_TXD0__FEC_TDATA_0                          816
-MX53_PAD_FEC_TXD0__GPIO1_30                             817
-MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1                        818
-MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0                    819
-MX53_PAD_FEC_MDC__FEC_MDC                               820
-MX53_PAD_FEC_MDC__GPIO1_31                              821
-MX53_PAD_FEC_MDC__ESAI1_TX5_RX0                         822
-MX53_PAD_FEC_MDC__MLB_MLBDAT                            823
-MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG                824
-MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1                     825
-MX53_PAD_PATA_DIOW__PATA_DIOW                           826
-MX53_PAD_PATA_DIOW__GPIO6_17                            827
-MX53_PAD_PATA_DIOW__UART1_TXD_MUX                       828
-MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2                   829
-MX53_PAD_PATA_DMACK__PATA_DMACK                         830
-MX53_PAD_PATA_DMACK__GPIO6_18                           831
-MX53_PAD_PATA_DMACK__UART1_RXD_MUX                      832
-MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3                  833
-MX53_PAD_PATA_DMARQ__PATA_DMARQ                         834
-MX53_PAD_PATA_DMARQ__GPIO7_0                            835
-MX53_PAD_PATA_DMARQ__UART2_TXD_MUX                      836
-MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0                      837
-MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4                  838
-MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN                 839
-MX53_PAD_PATA_BUFFER_EN__GPIO7_1                        840
-MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX                  841
-MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1                  842
-MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5              843
-MX53_PAD_PATA_INTRQ__PATA_INTRQ                         844
-MX53_PAD_PATA_INTRQ__GPIO7_2                            845
-MX53_PAD_PATA_INTRQ__UART2_CTS                          846
-MX53_PAD_PATA_INTRQ__CAN1_TXCAN                         847
-MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2                      848
-MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6                  849
-MX53_PAD_PATA_DIOR__PATA_DIOR                           850
-MX53_PAD_PATA_DIOR__GPIO7_3                             851
-MX53_PAD_PATA_DIOR__UART2_RTS                           852
-MX53_PAD_PATA_DIOR__CAN1_RXCAN                          853
-MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7                   854
-MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B                855
-MX53_PAD_PATA_RESET_B__GPIO7_4                          856
-MX53_PAD_PATA_RESET_B__ESDHC3_CMD                       857
-MX53_PAD_PATA_RESET_B__UART1_CTS                        858
-MX53_PAD_PATA_RESET_B__CAN2_TXCAN                       859
-MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0                860
-MX53_PAD_PATA_IORDY__PATA_IORDY                         861
-MX53_PAD_PATA_IORDY__GPIO7_5                            862
-MX53_PAD_PATA_IORDY__ESDHC3_CLK                         863
-MX53_PAD_PATA_IORDY__UART1_RTS                          864
-MX53_PAD_PATA_IORDY__CAN2_RXCAN                         865
-MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1                  866
-MX53_PAD_PATA_DA_0__PATA_DA_0                           867
-MX53_PAD_PATA_DA_0__GPIO7_6                             868
-MX53_PAD_PATA_DA_0__ESDHC3_RST                          869
-MX53_PAD_PATA_DA_0__OWIRE_LINE                          870
-MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2                   871
-MX53_PAD_PATA_DA_1__PATA_DA_1                           872
-MX53_PAD_PATA_DA_1__GPIO7_7                             873
-MX53_PAD_PATA_DA_1__ESDHC4_CMD                          874
-MX53_PAD_PATA_DA_1__UART3_CTS                           875
-MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3                   876
-MX53_PAD_PATA_DA_2__PATA_DA_2                           877
-MX53_PAD_PATA_DA_2__GPIO7_8                             878
-MX53_PAD_PATA_DA_2__ESDHC4_CLK                          879
-MX53_PAD_PATA_DA_2__UART3_RTS                           880
-MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4                   881
-MX53_PAD_PATA_CS_0__PATA_CS_0                           882
-MX53_PAD_PATA_CS_0__GPIO7_9                             883
-MX53_PAD_PATA_CS_0__UART3_TXD_MUX                       884
-MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5                   885
-MX53_PAD_PATA_CS_1__PATA_CS_1                           886
-MX53_PAD_PATA_CS_1__GPIO7_10                            887
-MX53_PAD_PATA_CS_1__UART3_RXD_MUX                       888
-MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6                   889
-MX53_PAD_PATA_DATA0__PATA_DATA_0                        890
-MX53_PAD_PATA_DATA0__GPIO2_0                            891
-MX53_PAD_PATA_DATA0__EMI_NANDF_D_0                      892
-MX53_PAD_PATA_DATA0__ESDHC3_DAT4                        893
-MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0              894
-MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0                     895
-MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7                  896
-MX53_PAD_PATA_DATA1__PATA_DATA_1                        897
-MX53_PAD_PATA_DATA1__GPIO2_1                            898
-MX53_PAD_PATA_DATA1__EMI_NANDF_D_1                      899
-MX53_PAD_PATA_DATA1__ESDHC3_DAT5                        900
-MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1              901
-MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1                     902
-MX53_PAD_PATA_DATA2__PATA_DATA_2                        903
-MX53_PAD_PATA_DATA2__GPIO2_2                            904
-MX53_PAD_PATA_DATA2__EMI_NANDF_D_2                      905
-MX53_PAD_PATA_DATA2__ESDHC3_DAT6                        906
-MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2              907
-MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2                     908
-MX53_PAD_PATA_DATA3__PATA_DATA_3                        909
-MX53_PAD_PATA_DATA3__GPIO2_3                            910
-MX53_PAD_PATA_DATA3__EMI_NANDF_D_3                      911
-MX53_PAD_PATA_DATA3__ESDHC3_DAT7                        912
-MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3              913
-MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3                     914
-MX53_PAD_PATA_DATA4__PATA_DATA_4                        915
-MX53_PAD_PATA_DATA4__GPIO2_4                            916
-MX53_PAD_PATA_DATA4__EMI_NANDF_D_4                      917
-MX53_PAD_PATA_DATA4__ESDHC4_DAT4                        918
-MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4              919
-MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4                     920
-MX53_PAD_PATA_DATA5__PATA_DATA_5                        921
-MX53_PAD_PATA_DATA5__GPIO2_5                            922
-MX53_PAD_PATA_DATA5__EMI_NANDF_D_5                      923
-MX53_PAD_PATA_DATA5__ESDHC4_DAT5                        924
-MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5              925
-MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5                     926
-MX53_PAD_PATA_DATA6__PATA_DATA_6                        927
-MX53_PAD_PATA_DATA6__GPIO2_6                            928
-MX53_PAD_PATA_DATA6__EMI_NANDF_D_6                      929
-MX53_PAD_PATA_DATA6__ESDHC4_DAT6                        930
-MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6              931
-MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6                     932
-MX53_PAD_PATA_DATA7__PATA_DATA_7                        933
-MX53_PAD_PATA_DATA7__GPIO2_7                            934
-MX53_PAD_PATA_DATA7__EMI_NANDF_D_7                      935
-MX53_PAD_PATA_DATA7__ESDHC4_DAT7                        936
-MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7              937
-MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7                     938
-MX53_PAD_PATA_DATA8__PATA_DATA_8                        939
-MX53_PAD_PATA_DATA8__GPIO2_8                            940
-MX53_PAD_PATA_DATA8__ESDHC1_DAT4                        941
-MX53_PAD_PATA_DATA8__EMI_NANDF_D_8                      942
-MX53_PAD_PATA_DATA8__ESDHC3_DAT0                        943
-MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8              944
-MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8                     945
-MX53_PAD_PATA_DATA9__PATA_DATA_9                        946
-MX53_PAD_PATA_DATA9__GPIO2_9                            947
-MX53_PAD_PATA_DATA9__ESDHC1_DAT5                        948
-MX53_PAD_PATA_DATA9__EMI_NANDF_D_9                      949
-MX53_PAD_PATA_DATA9__ESDHC3_DAT1                        950
-MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9              951
-MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9                     952
-MX53_PAD_PATA_DATA10__PATA_DATA_10                      953
-MX53_PAD_PATA_DATA10__GPIO2_10                          954
-MX53_PAD_PATA_DATA10__ESDHC1_DAT6                       955
-MX53_PAD_PATA_DATA10__EMI_NANDF_D_10                    956
-MX53_PAD_PATA_DATA10__ESDHC3_DAT2                       957
-MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10            958
-MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10                   959
-MX53_PAD_PATA_DATA11__PATA_DATA_11                      960
-MX53_PAD_PATA_DATA11__GPIO2_11                          961
-MX53_PAD_PATA_DATA11__ESDHC1_DAT7                       962
-MX53_PAD_PATA_DATA11__EMI_NANDF_D_11                    963
-MX53_PAD_PATA_DATA11__ESDHC3_DAT3                       964
-MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11            965
-MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11                   966
-MX53_PAD_PATA_DATA12__PATA_DATA_12                      967
-MX53_PAD_PATA_DATA12__GPIO2_12                          968
-MX53_PAD_PATA_DATA12__ESDHC2_DAT4                       969
-MX53_PAD_PATA_DATA12__EMI_NANDF_D_12                    970
-MX53_PAD_PATA_DATA12__ESDHC4_DAT0                       971
-MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12            972
-MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12                   973
-MX53_PAD_PATA_DATA13__PATA_DATA_13                      974
-MX53_PAD_PATA_DATA13__GPIO2_13                          975
-MX53_PAD_PATA_DATA13__ESDHC2_DAT5                       976
-MX53_PAD_PATA_DATA13__EMI_NANDF_D_13                    977
-MX53_PAD_PATA_DATA13__ESDHC4_DAT1                       978
-MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13            979
-MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13                   980
-MX53_PAD_PATA_DATA14__PATA_DATA_14                      981
-MX53_PAD_PATA_DATA14__GPIO2_14                          982
-MX53_PAD_PATA_DATA14__ESDHC2_DAT6                       983
-MX53_PAD_PATA_DATA14__EMI_NANDF_D_14                    984
-MX53_PAD_PATA_DATA14__ESDHC4_DAT2                       985
-MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14            986
-MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14                   987
-MX53_PAD_PATA_DATA15__PATA_DATA_15                      988
-MX53_PAD_PATA_DATA15__GPIO2_15                          989
-MX53_PAD_PATA_DATA15__ESDHC2_DAT7                       990
-MX53_PAD_PATA_DATA15__EMI_NANDF_D_15                    991
-MX53_PAD_PATA_DATA15__ESDHC4_DAT3                       992
-MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15            993
-MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15                   994
-MX53_PAD_SD1_DATA0__ESDHC1_DAT0                         995
-MX53_PAD_SD1_DATA0__GPIO1_16                            996
-MX53_PAD_SD1_DATA0__GPT_CAPIN1                          997
-MX53_PAD_SD1_DATA0__CSPI_MISO                           998
-MX53_PAD_SD1_DATA0__CCM_PLL3_BYP                        999
-MX53_PAD_SD1_DATA1__ESDHC1_DAT1                         1000
-MX53_PAD_SD1_DATA1__GPIO1_17                            1001
-MX53_PAD_SD1_DATA1__GPT_CAPIN2                          1002
-MX53_PAD_SD1_DATA1__CSPI_SS0                            1003
-MX53_PAD_SD1_DATA1__CCM_PLL4_BYP                        1004
-MX53_PAD_SD1_CMD__ESDHC1_CMD                            1005
-MX53_PAD_SD1_CMD__GPIO1_18                              1006
-MX53_PAD_SD1_CMD__GPT_CMPOUT1                           1007
-MX53_PAD_SD1_CMD__CSPI_MOSI                             1008
-MX53_PAD_SD1_CMD__CCM_PLL1_BYP                          1009
-MX53_PAD_SD1_DATA2__ESDHC1_DAT2                         1010
-MX53_PAD_SD1_DATA2__GPIO1_19                            1011
-MX53_PAD_SD1_DATA2__GPT_CMPOUT2                         1012
-MX53_PAD_SD1_DATA2__PWM2_PWMO                           1013
-MX53_PAD_SD1_DATA2__WDOG1_WDOG_B                        1014
-MX53_PAD_SD1_DATA2__CSPI_SS1                            1015
-MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB                1016
-MX53_PAD_SD1_DATA2__CCM_PLL2_BYP                        1017
-MX53_PAD_SD1_CLK__ESDHC1_CLK                            1018
-MX53_PAD_SD1_CLK__GPIO1_20                              1019
-MX53_PAD_SD1_CLK__OSC32k_32K_OUT                        1020
-MX53_PAD_SD1_CLK__GPT_CLKIN                             1021
-MX53_PAD_SD1_CLK__CSPI_SCLK                             1022
-MX53_PAD_SD1_CLK__SATA_PHY_DTB_0                        1023
-MX53_PAD_SD1_DATA3__ESDHC1_DAT3                         1024
-MX53_PAD_SD1_DATA3__GPIO1_21                            1025
-MX53_PAD_SD1_DATA3__GPT_CMPOUT3                         1026
-MX53_PAD_SD1_DATA3__PWM1_PWMO                           1027
-MX53_PAD_SD1_DATA3__WDOG2_WDOG_B                        1028
-MX53_PAD_SD1_DATA3__CSPI_SS2                            1029
-MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB                1030
-MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1                      1031
-MX53_PAD_SD2_CLK__ESDHC2_CLK                            1032
-MX53_PAD_SD2_CLK__GPIO1_10                              1033
-MX53_PAD_SD2_CLK__KPP_COL_5                             1034
-MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS                      1035
-MX53_PAD_SD2_CLK__CSPI_SCLK                             1036
-MX53_PAD_SD2_CLK__SCC_RANDOM_V                          1037
-MX53_PAD_SD2_CMD__ESDHC2_CMD                            1038
-MX53_PAD_SD2_CMD__GPIO1_11                              1039
-MX53_PAD_SD2_CMD__KPP_ROW_5                             1040
-MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC                       1041
-MX53_PAD_SD2_CMD__CSPI_MOSI                             1042
-MX53_PAD_SD2_CMD__SCC_RANDOM                            1043
-MX53_PAD_SD2_DATA3__ESDHC2_DAT3                         1044
-MX53_PAD_SD2_DATA3__GPIO1_12                            1045
-MX53_PAD_SD2_DATA3__KPP_COL_6                           1046
-MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC                     1047
-MX53_PAD_SD2_DATA3__CSPI_SS2                            1048
-MX53_PAD_SD2_DATA3__SJC_DONE                            1049
-MX53_PAD_SD2_DATA2__ESDHC2_DAT2                         1050
-MX53_PAD_SD2_DATA2__GPIO1_13                            1051
-MX53_PAD_SD2_DATA2__KPP_ROW_6                           1052
-MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD                     1053
-MX53_PAD_SD2_DATA2__CSPI_SS1                            1054
-MX53_PAD_SD2_DATA2__SJC_FAIL                            1055
-MX53_PAD_SD2_DATA1__ESDHC2_DAT1                         1056
-MX53_PAD_SD2_DATA1__GPIO1_14                            1057
-MX53_PAD_SD2_DATA1__KPP_COL_7                           1058
-MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS                    1059
-MX53_PAD_SD2_DATA1__CSPI_SS0                            1060
-MX53_PAD_SD2_DATA1__RTIC_SEC_VIO                        1061
-MX53_PAD_SD2_DATA0__ESDHC2_DAT0                         1062
-MX53_PAD_SD2_DATA0__GPIO1_15                            1063
-MX53_PAD_SD2_DATA0__KPP_ROW_7                           1064
-MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD                     1065
-MX53_PAD_SD2_DATA0__CSPI_MISO                           1066
-MX53_PAD_SD2_DATA0__RTIC_DONE_INT                       1067
-MX53_PAD_GPIO_0__CCM_CLKO                               1068
-MX53_PAD_GPIO_0__GPIO1_0                                1069
-MX53_PAD_GPIO_0__KPP_COL_5                              1070
-MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK                       1071
-MX53_PAD_GPIO_0__EPIT1_EPITO                            1072
-MX53_PAD_GPIO_0__SRTC_ALARM_DEB                         1073
-MX53_PAD_GPIO_0__USBOH3_USBH1_PWR                       1074
-MX53_PAD_GPIO_0__CSU_TD                                 1075
-MX53_PAD_GPIO_1__ESAI1_SCKR                             1076
-MX53_PAD_GPIO_1__GPIO1_1                                1077
-MX53_PAD_GPIO_1__KPP_ROW_5                              1078
-MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK                       1079
-MX53_PAD_GPIO_1__PWM2_PWMO                              1080
-MX53_PAD_GPIO_1__WDOG2_WDOG_B                           1081
-MX53_PAD_GPIO_1__ESDHC1_CD                              1082
-MX53_PAD_GPIO_1__SRC_TESTER_ACK                         1083
-MX53_PAD_GPIO_9__ESAI1_FSR                              1084
-MX53_PAD_GPIO_9__GPIO1_9                                1085
-MX53_PAD_GPIO_9__KPP_COL_6                              1086
-MX53_PAD_GPIO_9__CCM_REF_EN_B                           1087
-MX53_PAD_GPIO_9__PWM1_PWMO                              1088
-MX53_PAD_GPIO_9__WDOG1_WDOG_B                           1089
-MX53_PAD_GPIO_9__ESDHC1_WP                              1090
-MX53_PAD_GPIO_9__SCC_FAIL_STATE                         1091
-MX53_PAD_GPIO_3__ESAI1_HCKR                             1092
-MX53_PAD_GPIO_3__GPIO1_3                                1093
-MX53_PAD_GPIO_3__I2C3_SCL                               1094
-MX53_PAD_GPIO_3__DPLLIP1_TOG_EN                         1095
-MX53_PAD_GPIO_3__CCM_CLKO2                              1096
-MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0             1097
-MX53_PAD_GPIO_3__USBOH3_USBH1_OC                        1098
-MX53_PAD_GPIO_3__MLB_MLBCLK                             1099
-MX53_PAD_GPIO_6__ESAI1_SCKT                             1100
-MX53_PAD_GPIO_6__GPIO1_6                                1101
-MX53_PAD_GPIO_6__I2C3_SDA                               1102
-MX53_PAD_GPIO_6__CCM_CCM_OUT_0                          1103
-MX53_PAD_GPIO_6__CSU_CSU_INT_DEB                        1104
-MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1             1105
-MX53_PAD_GPIO_6__ESDHC2_LCTL                            1106
-MX53_PAD_GPIO_6__MLB_MLBSIG                             1107
-MX53_PAD_GPIO_2__ESAI1_FST                              1108
-MX53_PAD_GPIO_2__GPIO1_2                                1109
-MX53_PAD_GPIO_2__KPP_ROW_6                              1110
-MX53_PAD_GPIO_2__CCM_CCM_OUT_1                          1111
-MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0                    1112
-MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2             1113
-MX53_PAD_GPIO_2__ESDHC2_WP                              1114
-MX53_PAD_GPIO_2__MLB_MLBDAT                             1115
-MX53_PAD_GPIO_4__ESAI1_HCKT                             1116
-MX53_PAD_GPIO_4__GPIO1_4                                1117
-MX53_PAD_GPIO_4__KPP_COL_7                              1118
-MX53_PAD_GPIO_4__CCM_CCM_OUT_2                          1119
-MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1                    1120
-MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3             1121
-MX53_PAD_GPIO_4__ESDHC2_CD                              1122
-MX53_PAD_GPIO_4__SCC_SEC_STATE                          1123
-MX53_PAD_GPIO_5__ESAI1_TX2_RX3                          1124
-MX53_PAD_GPIO_5__GPIO1_5                                1125
-MX53_PAD_GPIO_5__KPP_ROW_7                              1126
-MX53_PAD_GPIO_5__CCM_CLKO                               1127
-MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2                    1128
-MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4             1129
-MX53_PAD_GPIO_5__I2C3_SCL                               1130
-MX53_PAD_GPIO_5__CCM_PLL1_BYP                           1131
-MX53_PAD_GPIO_7__ESAI1_TX4_RX1                          1132
-MX53_PAD_GPIO_7__GPIO1_7                                1133
-MX53_PAD_GPIO_7__EPIT1_EPITO                            1134
-MX53_PAD_GPIO_7__CAN1_TXCAN                             1135
-MX53_PAD_GPIO_7__UART2_TXD_MUX                          1136
-MX53_PAD_GPIO_7__FIRI_RXD                               1137
-MX53_PAD_GPIO_7__SPDIF_PLOCK                            1138
-MX53_PAD_GPIO_7__CCM_PLL2_BYP                           1139
-MX53_PAD_GPIO_8__ESAI1_TX5_RX0                          1140
-MX53_PAD_GPIO_8__GPIO1_8                                1141
-MX53_PAD_GPIO_8__EPIT2_EPITO                            1142
-MX53_PAD_GPIO_8__CAN1_RXCAN                             1143
-MX53_PAD_GPIO_8__UART2_RXD_MUX                          1144
-MX53_PAD_GPIO_8__FIRI_TXD                               1145
-MX53_PAD_GPIO_8__SPDIF_SRCLK                            1146
-MX53_PAD_GPIO_8__CCM_PLL3_BYP                           1147
-MX53_PAD_GPIO_16__ESAI1_TX3_RX2                         1148
-MX53_PAD_GPIO_16__GPIO7_11                              1149
-MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT                      1150
-MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1                  1151
-MX53_PAD_GPIO_16__SPDIF_IN1                             1152
-MX53_PAD_GPIO_16__I2C3_SDA                              1153
-MX53_PAD_GPIO_16__SJC_DE_B                              1154
-MX53_PAD_GPIO_17__ESAI1_TX0                             1155
-MX53_PAD_GPIO_17__GPIO7_12                              1156
-MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0                      1157
-MX53_PAD_GPIO_17__GPC_PMIC_RDY                          1158
-MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG                   1159
-MX53_PAD_GPIO_17__SPDIF_OUT1                            1160
-MX53_PAD_GPIO_17__IPU_SNOOP2                            1161
-MX53_PAD_GPIO_17__SJC_JTAG_ACT                          1162
-MX53_PAD_GPIO_18__ESAI1_TX1                             1163
-MX53_PAD_GPIO_18__GPIO7_13                              1164
-MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1                      1165
-MX53_PAD_GPIO_18__OWIRE_LINE                            1166
-MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG                1167
-MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK                      1168
-MX53_PAD_GPIO_18__ESDHC1_LCTL                           1169
-MX53_PAD_GPIO_18__SRC_SYSTEM_RST                        1170
+Refer to imx53-pinfunc.h in device tree source folder for all available
+imx53 PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6dl-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6dl-pinctrl.txt
new file mode 100644
index 000000000000..0ac5bee87505
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6dl-pinctrl.txt
@@ -0,0 +1,38 @@
+* Freescale IMX6 DualLite/Solo IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx6dl-iomuxc"
+- fsl,pins: two integers array, represents a group of pins mux and config
+  setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
+  pin working on a specific function, CONFIG is the pad setting value like
+  pull-up for this pin. Please refer to imx6dl datasheet for the valid pad
+  config settings.
+
+CONFIG bits definition:
+PAD_CTL_HYS                     (1 << 16)
+PAD_CTL_PUS_100K_DOWN           (0 << 14)
+PAD_CTL_PUS_47K_UP              (1 << 14)
+PAD_CTL_PUS_100K_UP             (2 << 14)
+PAD_CTL_PUS_22K_UP              (3 << 14)
+PAD_CTL_PUE                     (1 << 13)
+PAD_CTL_PKE                     (1 << 12)
+PAD_CTL_ODE                     (1 << 11)
+PAD_CTL_SPEED_LOW               (1 << 6)
+PAD_CTL_SPEED_MED               (2 << 6)
+PAD_CTL_SPEED_HIGH              (3 << 6)
+PAD_CTL_DSE_DISABLE             (0 << 3)
+PAD_CTL_DSE_240ohm              (1 << 3)
+PAD_CTL_DSE_120ohm              (2 << 3)
+PAD_CTL_DSE_80ohm               (3 << 3)
+PAD_CTL_DSE_60ohm               (4 << 3)
+PAD_CTL_DSE_48ohm               (5 << 3)
+PAD_CTL_DSE_40ohm               (6 << 3)
+PAD_CTL_DSE_34ohm               (7 << 3)
+PAD_CTL_SRE_FAST                (1 << 0)
+PAD_CTL_SRE_SLOW                (0 << 0)
+
+Refer to imx6dl-pinfunc.h in device tree source folder for all available
+imx6dl PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt
index a4119f6422d9..546610cf2ae7 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt
@@ -34,1597 +34,5 @@ PAD_CTL_DSE_34ohm               (7 << 3)
 PAD_CTL_SRE_FAST                (1 << 0)
 PAD_CTL_SRE_SLOW                (0 << 0)
 
-See below for available PIN_FUNC_ID for imx6q:
-MX6Q_PAD_SD2_DAT1__USDHC2_DAT1                  0
-MX6Q_PAD_SD2_DAT1__ECSPI5_SS0                   1
-MX6Q_PAD_SD2_DAT1__WEIM_WEIM_CS_2               2
-MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS             3
-MX6Q_PAD_SD2_DAT1__KPP_COL_7                    4
-MX6Q_PAD_SD2_DAT1__GPIO_1_14                    5
-MX6Q_PAD_SD2_DAT1__CCM_WAIT                     6
-MX6Q_PAD_SD2_DAT1__ANATOP_TESTO_0               7
-MX6Q_PAD_SD2_DAT2__USDHC2_DAT2                  8
-MX6Q_PAD_SD2_DAT2__ECSPI5_SS1                   9
-MX6Q_PAD_SD2_DAT2__WEIM_WEIM_CS_3               10
-MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD              11
-MX6Q_PAD_SD2_DAT2__KPP_ROW_6                    12
-MX6Q_PAD_SD2_DAT2__GPIO_1_13                    13
-MX6Q_PAD_SD2_DAT2__CCM_STOP                     14
-MX6Q_PAD_SD2_DAT2__ANATOP_TESTO_1               15
-MX6Q_PAD_SD2_DAT0__USDHC2_DAT0                  16
-MX6Q_PAD_SD2_DAT0__ECSPI5_MISO                  17
-MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD              18
-MX6Q_PAD_SD2_DAT0__KPP_ROW_7                    19
-MX6Q_PAD_SD2_DAT0__GPIO_1_15                    20
-MX6Q_PAD_SD2_DAT0__DCIC2_DCIC_OUT               21
-MX6Q_PAD_SD2_DAT0__TESTO_2                      22
-MX6Q_PAD_RGMII_TXC__USBOH3_H2_DATA              23
-MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC              24
-MX6Q_PAD_RGMII_TXC__SPDIF_SPDIF_EXTCLK          25
-MX6Q_PAD_RGMII_TXC__GPIO_6_19                   26
-MX6Q_PAD_RGMII_TXC__MIPI_CORE_DPHY_IN_0         27
-MX6Q_PAD_RGMII_TXC__ANATOP_24M_OUT              28
-MX6Q_PAD_RGMII_TD0__MIPI_HSI_CRL_TX_RDY         29
-MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0              30
-MX6Q_PAD_RGMII_TD0__GPIO_6_20                   31
-MX6Q_PAD_RGMII_TD0__MIPI_CORE_DPHY_IN_1         32
-MX6Q_PAD_RGMII_TD1__MIPI_HSI_CRL_RX_FLG         33
-MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1              34
-MX6Q_PAD_RGMII_TD1__GPIO_6_21                   35
-MX6Q_PAD_RGMII_TD1__MIPI_CORE_DPHY_IN_2         36
-MX6Q_PAD_RGMII_TD1__CCM_PLL3_BYP                37
-MX6Q_PAD_RGMII_TD2__MIPI_HSI_CRL_RX_DTA         38
-MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2              39
-MX6Q_PAD_RGMII_TD2__GPIO_6_22                   40
-MX6Q_PAD_RGMII_TD2__MIPI_CORE_DPHY_IN_3         41
-MX6Q_PAD_RGMII_TD2__CCM_PLL2_BYP                42
-MX6Q_PAD_RGMII_TD3__MIPI_HSI_CRL_RX_WAK         43
-MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3              44
-MX6Q_PAD_RGMII_TD3__GPIO_6_23                   45
-MX6Q_PAD_RGMII_TD3__MIPI_CORE_DPHY_IN_4         46
-MX6Q_PAD_RGMII_RX_CTL__USBOH3_H3_DATA           47
-MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL             48
-MX6Q_PAD_RGMII_RX_CTL__GPIO_6_24                49
-MX6Q_PAD_RGMII_RX_CTL__MIPI_DPHY_IN_5           50
-MX6Q_PAD_RGMII_RD0__MIPI_HSI_CRL_RX_RDY         51
-MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0              52
-MX6Q_PAD_RGMII_RD0__GPIO_6_25                   53
-MX6Q_PAD_RGMII_RD0__MIPI_CORE_DPHY_IN_6         54
-MX6Q_PAD_RGMII_TX_CTL__USBOH3_H2_STROBE         55
-MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL             56
-MX6Q_PAD_RGMII_TX_CTL__GPIO_6_26                57
-MX6Q_PAD_RGMII_TX_CTL__CORE_DPHY_IN_7           58
-MX6Q_PAD_RGMII_TX_CTL__ANATOP_REF_OUT           59
-MX6Q_PAD_RGMII_RD1__MIPI_HSI_CTRL_TX_FL         60
-MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1              61
-MX6Q_PAD_RGMII_RD1__GPIO_6_27                   62
-MX6Q_PAD_RGMII_RD1__CORE_DPHY_TEST_IN_8         63
-MX6Q_PAD_RGMII_RD1__SJC_FAIL                    64
-MX6Q_PAD_RGMII_RD2__MIPI_HSI_CRL_TX_DTA         65
-MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2              66
-MX6Q_PAD_RGMII_RD2__GPIO_6_28                   67
-MX6Q_PAD_RGMII_RD2__MIPI_CORE_DPHY_IN_9         68
-MX6Q_PAD_RGMII_RD3__MIPI_HSI_CRL_TX_WAK         69
-MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3              70
-MX6Q_PAD_RGMII_RD3__GPIO_6_29                   71
-MX6Q_PAD_RGMII_RD3__MIPI_CORE_DPHY_IN10         72
-MX6Q_PAD_RGMII_RXC__USBOH3_H3_STROBE            73
-MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC              74
-MX6Q_PAD_RGMII_RXC__GPIO_6_30                   75
-MX6Q_PAD_RGMII_RXC__MIPI_CORE_DPHY_IN11         76
-MX6Q_PAD_EIM_A25__WEIM_WEIM_A_25                77
-MX6Q_PAD_EIM_A25__ECSPI4_SS1                    78
-MX6Q_PAD_EIM_A25__ECSPI2_RDY                    79
-MX6Q_PAD_EIM_A25__IPU1_DI1_PIN12                80
-MX6Q_PAD_EIM_A25__IPU1_DI0_D1_CS                81
-MX6Q_PAD_EIM_A25__GPIO_5_2                      82
-MX6Q_PAD_EIM_A25__HDMI_TX_CEC_LINE              83
-MX6Q_PAD_EIM_A25__PL301_PER1_HBURST_0           84
-MX6Q_PAD_EIM_EB2__WEIM_WEIM_EB_2                85
-MX6Q_PAD_EIM_EB2__ECSPI1_SS0                    86
-MX6Q_PAD_EIM_EB2__CCM_DI1_EXT_CLK               87
-MX6Q_PAD_EIM_EB2__IPU2_CSI1_D_19                88
-MX6Q_PAD_EIM_EB2__HDMI_TX_DDC_SCL               89
-MX6Q_PAD_EIM_EB2__GPIO_2_30                     90
-MX6Q_PAD_EIM_EB2__I2C2_SCL                      91
-MX6Q_PAD_EIM_EB2__SRC_BT_CFG_30                 92
-MX6Q_PAD_EIM_D16__WEIM_WEIM_D_16                93
-MX6Q_PAD_EIM_D16__ECSPI1_SCLK                   94
-MX6Q_PAD_EIM_D16__IPU1_DI0_PIN5                 95
-MX6Q_PAD_EIM_D16__IPU2_CSI1_D_18                96
-MX6Q_PAD_EIM_D16__HDMI_TX_DDC_SDA               97
-MX6Q_PAD_EIM_D16__GPIO_3_16                     98
-MX6Q_PAD_EIM_D16__I2C2_SDA                      99
-MX6Q_PAD_EIM_D17__WEIM_WEIM_D_17                100
-MX6Q_PAD_EIM_D17__ECSPI1_MISO                   101
-MX6Q_PAD_EIM_D17__IPU1_DI0_PIN6                 102
-MX6Q_PAD_EIM_D17__IPU2_CSI1_PIXCLK              103
-MX6Q_PAD_EIM_D17__DCIC1_DCIC_OUT                104
-MX6Q_PAD_EIM_D17__GPIO_3_17                     105
-MX6Q_PAD_EIM_D17__I2C3_SCL                      106
-MX6Q_PAD_EIM_D17__PL301_PER1_HBURST_1           107
-MX6Q_PAD_EIM_D18__WEIM_WEIM_D_18                108
-MX6Q_PAD_EIM_D18__ECSPI1_MOSI                   109
-MX6Q_PAD_EIM_D18__IPU1_DI0_PIN7                 110
-MX6Q_PAD_EIM_D18__IPU2_CSI1_D_17                111
-MX6Q_PAD_EIM_D18__IPU1_DI1_D0_CS                112
-MX6Q_PAD_EIM_D18__GPIO_3_18                     113
-MX6Q_PAD_EIM_D18__I2C3_SDA                      114
-MX6Q_PAD_EIM_D18__PL301_PER1_HBURST_2           115
-MX6Q_PAD_EIM_D19__WEIM_WEIM_D_19                116
-MX6Q_PAD_EIM_D19__ECSPI1_SS1                    117
-MX6Q_PAD_EIM_D19__IPU1_DI0_PIN8                 118
-MX6Q_PAD_EIM_D19__IPU2_CSI1_D_16                119
-MX6Q_PAD_EIM_D19__UART1_CTS                     120
-MX6Q_PAD_EIM_D19__GPIO_3_19                     121
-MX6Q_PAD_EIM_D19__EPIT1_EPITO                   122
-MX6Q_PAD_EIM_D19__PL301_PER1_HRESP              123
-MX6Q_PAD_EIM_D20__WEIM_WEIM_D_20                124
-MX6Q_PAD_EIM_D20__ECSPI4_SS0                    125
-MX6Q_PAD_EIM_D20__IPU1_DI0_PIN16                126
-MX6Q_PAD_EIM_D20__IPU2_CSI1_D_15                127
-MX6Q_PAD_EIM_D20__UART1_RTS                     128
-MX6Q_PAD_EIM_D20__GPIO_3_20                     129
-MX6Q_PAD_EIM_D20__EPIT2_EPITO                   130
-MX6Q_PAD_EIM_D21__WEIM_WEIM_D_21                131
-MX6Q_PAD_EIM_D21__ECSPI4_SCLK                   132
-MX6Q_PAD_EIM_D21__IPU1_DI0_PIN17                133
-MX6Q_PAD_EIM_D21__IPU2_CSI1_D_11                134
-MX6Q_PAD_EIM_D21__USBOH3_USBOTG_OC              135
-MX6Q_PAD_EIM_D21__GPIO_3_21                     136
-MX6Q_PAD_EIM_D21__I2C1_SCL                      137
-MX6Q_PAD_EIM_D21__SPDIF_IN1                     138
-MX6Q_PAD_EIM_D22__WEIM_WEIM_D_22                139
-MX6Q_PAD_EIM_D22__ECSPI4_MISO                   140
-MX6Q_PAD_EIM_D22__IPU1_DI0_PIN1                 141
-MX6Q_PAD_EIM_D22__IPU2_CSI1_D_10                142
-MX6Q_PAD_EIM_D22__USBOH3_USBOTG_PWR             143
-MX6Q_PAD_EIM_D22__GPIO_3_22                     144
-MX6Q_PAD_EIM_D22__SPDIF_OUT1                    145
-MX6Q_PAD_EIM_D22__PL301_PER1_HWRITE             146
-MX6Q_PAD_EIM_D23__WEIM_WEIM_D_23                147
-MX6Q_PAD_EIM_D23__IPU1_DI0_D0_CS                148
-MX6Q_PAD_EIM_D23__UART3_CTS                     149
-MX6Q_PAD_EIM_D23__UART1_DCD                     150
-MX6Q_PAD_EIM_D23__IPU2_CSI1_DATA_EN             151
-MX6Q_PAD_EIM_D23__GPIO_3_23                     152
-MX6Q_PAD_EIM_D23__IPU1_DI1_PIN2                 153
-MX6Q_PAD_EIM_D23__IPU1_DI1_PIN14                154
-MX6Q_PAD_EIM_EB3__WEIM_WEIM_EB_3                155
-MX6Q_PAD_EIM_EB3__ECSPI4_RDY                    156
-MX6Q_PAD_EIM_EB3__UART3_RTS                     157
-MX6Q_PAD_EIM_EB3__UART1_RI                      158
-MX6Q_PAD_EIM_EB3__IPU2_CSI1_HSYNC               159
-MX6Q_PAD_EIM_EB3__GPIO_2_31                     160
-MX6Q_PAD_EIM_EB3__IPU1_DI1_PIN3                 161
-MX6Q_PAD_EIM_EB3__SRC_BT_CFG_31                 162
-MX6Q_PAD_EIM_D24__WEIM_WEIM_D_24                163
-MX6Q_PAD_EIM_D24__ECSPI4_SS2                    164
-MX6Q_PAD_EIM_D24__UART3_TXD                     165
-MX6Q_PAD_EIM_D24__ECSPI1_SS2                    166
-MX6Q_PAD_EIM_D24__ECSPI2_SS2                    167
-MX6Q_PAD_EIM_D24__GPIO_3_24                     168
-MX6Q_PAD_EIM_D24__AUDMUX_AUD5_RXFS              169
-MX6Q_PAD_EIM_D24__UART1_DTR                     170
-MX6Q_PAD_EIM_D25__WEIM_WEIM_D_25                171
-MX6Q_PAD_EIM_D25__ECSPI4_SS3                    172
-MX6Q_PAD_EIM_D25__UART3_RXD                     173
-MX6Q_PAD_EIM_D25__ECSPI1_SS3                    174
-MX6Q_PAD_EIM_D25__ECSPI2_SS3                    175
-MX6Q_PAD_EIM_D25__GPIO_3_25                     176
-MX6Q_PAD_EIM_D25__AUDMUX_AUD5_RXC               177
-MX6Q_PAD_EIM_D25__UART1_DSR                     178
-MX6Q_PAD_EIM_D26__WEIM_WEIM_D_26                179
-MX6Q_PAD_EIM_D26__IPU1_DI1_PIN11                180
-MX6Q_PAD_EIM_D26__IPU1_CSI0_D_1                 181
-MX6Q_PAD_EIM_D26__IPU2_CSI1_D_14                182
-MX6Q_PAD_EIM_D26__UART2_TXD                     183
-MX6Q_PAD_EIM_D26__GPIO_3_26                     184
-MX6Q_PAD_EIM_D26__IPU1_SISG_2                   185
-MX6Q_PAD_EIM_D26__IPU1_DISP1_DAT_22             186
-MX6Q_PAD_EIM_D27__WEIM_WEIM_D_27                187
-MX6Q_PAD_EIM_D27__IPU1_DI1_PIN13                188
-MX6Q_PAD_EIM_D27__IPU1_CSI0_D_0                 189
-MX6Q_PAD_EIM_D27__IPU2_CSI1_D_13                190
-MX6Q_PAD_EIM_D27__UART2_RXD                     191
-MX6Q_PAD_EIM_D27__GPIO_3_27                     192
-MX6Q_PAD_EIM_D27__IPU1_SISG_3                   193
-MX6Q_PAD_EIM_D27__IPU1_DISP1_DAT_23             194
-MX6Q_PAD_EIM_D28__WEIM_WEIM_D_28                195
-MX6Q_PAD_EIM_D28__I2C1_SDA                      196
-MX6Q_PAD_EIM_D28__ECSPI4_MOSI                   197
-MX6Q_PAD_EIM_D28__IPU2_CSI1_D_12                198
-MX6Q_PAD_EIM_D28__UART2_CTS                     199
-MX6Q_PAD_EIM_D28__GPIO_3_28                     200
-MX6Q_PAD_EIM_D28__IPU1_EXT_TRIG                 201
-MX6Q_PAD_EIM_D28__IPU1_DI0_PIN13                202
-MX6Q_PAD_EIM_D29__WEIM_WEIM_D_29                203
-MX6Q_PAD_EIM_D29__IPU1_DI1_PIN15                204
-MX6Q_PAD_EIM_D29__ECSPI4_SS0                    205
-MX6Q_PAD_EIM_D29__UART2_RTS                     206
-MX6Q_PAD_EIM_D29__GPIO_3_29                     207
-MX6Q_PAD_EIM_D29__IPU2_CSI1_VSYNC               208
-MX6Q_PAD_EIM_D29__IPU1_DI0_PIN14                209
-MX6Q_PAD_EIM_D30__WEIM_WEIM_D_30                210
-MX6Q_PAD_EIM_D30__IPU1_DISP1_DAT_21             211
-MX6Q_PAD_EIM_D30__IPU1_DI0_PIN11                212
-MX6Q_PAD_EIM_D30__IPU1_CSI0_D_3                 213
-MX6Q_PAD_EIM_D30__UART3_CTS                     214
-MX6Q_PAD_EIM_D30__GPIO_3_30                     215
-MX6Q_PAD_EIM_D30__USBOH3_USBH1_OC               216
-MX6Q_PAD_EIM_D30__PL301_PER1_HPROT_0            217
-MX6Q_PAD_EIM_D31__WEIM_WEIM_D_31                218
-MX6Q_PAD_EIM_D31__IPU1_DISP1_DAT_20             219
-MX6Q_PAD_EIM_D31__IPU1_DI0_PIN12                220
-MX6Q_PAD_EIM_D31__IPU1_CSI0_D_2                 221
-MX6Q_PAD_EIM_D31__UART3_RTS                     222
-MX6Q_PAD_EIM_D31__GPIO_3_31                     223
-MX6Q_PAD_EIM_D31__USBOH3_USBH1_PWR              224
-MX6Q_PAD_EIM_D31__PL301_PER1_HPROT_1            225
-MX6Q_PAD_EIM_A24__WEIM_WEIM_A_24                226
-MX6Q_PAD_EIM_A24__IPU1_DISP1_DAT_19             227
-MX6Q_PAD_EIM_A24__IPU2_CSI1_D_19                228
-MX6Q_PAD_EIM_A24__IPU2_SISG_2                   229
-MX6Q_PAD_EIM_A24__IPU1_SISG_2                   230
-MX6Q_PAD_EIM_A24__GPIO_5_4                      231
-MX6Q_PAD_EIM_A24__PL301_PER1_HPROT_2            232
-MX6Q_PAD_EIM_A24__SRC_BT_CFG_24                 233
-MX6Q_PAD_EIM_A23__WEIM_WEIM_A_23                234
-MX6Q_PAD_EIM_A23__IPU1_DISP1_DAT_18             235
-MX6Q_PAD_EIM_A23__IPU2_CSI1_D_18                236
-MX6Q_PAD_EIM_A23__IPU2_SISG_3                   237
-MX6Q_PAD_EIM_A23__IPU1_SISG_3                   238
-MX6Q_PAD_EIM_A23__GPIO_6_6                      239
-MX6Q_PAD_EIM_A23__PL301_PER1_HPROT_3            240
-MX6Q_PAD_EIM_A23__SRC_BT_CFG_23                 241
-MX6Q_PAD_EIM_A22__WEIM_WEIM_A_22                242
-MX6Q_PAD_EIM_A22__IPU1_DISP1_DAT_17             243
-MX6Q_PAD_EIM_A22__IPU2_CSI1_D_17                244
-MX6Q_PAD_EIM_A22__GPIO_2_16                     245
-MX6Q_PAD_EIM_A22__TPSMP_HDATA_0                 246
-MX6Q_PAD_EIM_A22__SRC_BT_CFG_22                 247
-MX6Q_PAD_EIM_A21__WEIM_WEIM_A_21                248
-MX6Q_PAD_EIM_A21__IPU1_DISP1_DAT_16             249
-MX6Q_PAD_EIM_A21__IPU2_CSI1_D_16                250
-MX6Q_PAD_EIM_A21__RESERVED_RESERVED             251
-MX6Q_PAD_EIM_A21__MIPI_CORE_DPHY_OUT_18         252
-MX6Q_PAD_EIM_A21__GPIO_2_17                     253
-MX6Q_PAD_EIM_A21__TPSMP_HDATA_1                 254
-MX6Q_PAD_EIM_A21__SRC_BT_CFG_21                 255
-MX6Q_PAD_EIM_A20__WEIM_WEIM_A_20                256
-MX6Q_PAD_EIM_A20__IPU1_DISP1_DAT_15             257
-MX6Q_PAD_EIM_A20__IPU2_CSI1_D_15                258
-MX6Q_PAD_EIM_A20__RESERVED_RESERVED             259
-MX6Q_PAD_EIM_A20__MIPI_CORE_DPHY_OUT_19         260
-MX6Q_PAD_EIM_A20__GPIO_2_18                     261
-MX6Q_PAD_EIM_A20__TPSMP_HDATA_2                 262
-MX6Q_PAD_EIM_A20__SRC_BT_CFG_20                 263
-MX6Q_PAD_EIM_A19__WEIM_WEIM_A_19                264
-MX6Q_PAD_EIM_A19__IPU1_DISP1_DAT_14             265
-MX6Q_PAD_EIM_A19__IPU2_CSI1_D_14                266
-MX6Q_PAD_EIM_A19__RESERVED_RESERVED             267
-MX6Q_PAD_EIM_A19__MIPI_CORE_DPHY_OUT_20         268
-MX6Q_PAD_EIM_A19__GPIO_2_19                     269
-MX6Q_PAD_EIM_A19__TPSMP_HDATA_3                 270
-MX6Q_PAD_EIM_A19__SRC_BT_CFG_19                 271
-MX6Q_PAD_EIM_A18__WEIM_WEIM_A_18                272
-MX6Q_PAD_EIM_A18__IPU1_DISP1_DAT_13             273
-MX6Q_PAD_EIM_A18__IPU2_CSI1_D_13                274
-MX6Q_PAD_EIM_A18__RESERVED_RESERVED             275
-MX6Q_PAD_EIM_A18__MIPI_CORE_DPHY_OUT_21         276
-MX6Q_PAD_EIM_A18__GPIO_2_20                     277
-MX6Q_PAD_EIM_A18__TPSMP_HDATA_4                 278
-MX6Q_PAD_EIM_A18__SRC_BT_CFG_18                 279
-MX6Q_PAD_EIM_A17__WEIM_WEIM_A_17                280
-MX6Q_PAD_EIM_A17__IPU1_DISP1_DAT_12             281
-MX6Q_PAD_EIM_A17__IPU2_CSI1_D_12                282
-MX6Q_PAD_EIM_A17__RESERVED_RESERVED             283
-MX6Q_PAD_EIM_A17__MIPI_CORE_DPHY_OUT_22         284
-MX6Q_PAD_EIM_A17__GPIO_2_21                     285
-MX6Q_PAD_EIM_A17__TPSMP_HDATA_5                 286
-MX6Q_PAD_EIM_A17__SRC_BT_CFG_17                 287
-MX6Q_PAD_EIM_A16__WEIM_WEIM_A_16                288
-MX6Q_PAD_EIM_A16__IPU1_DI1_DISP_CLK             289
-MX6Q_PAD_EIM_A16__IPU2_CSI1_PIXCLK              290
-MX6Q_PAD_EIM_A16__MIPI_CORE_DPHY_OUT_23         291
-MX6Q_PAD_EIM_A16__GPIO_2_22                     292
-MX6Q_PAD_EIM_A16__TPSMP_HDATA_6                 293
-MX6Q_PAD_EIM_A16__SRC_BT_CFG_16                 294
-MX6Q_PAD_EIM_CS0__WEIM_WEIM_CS_0                295
-MX6Q_PAD_EIM_CS0__IPU1_DI1_PIN5                 296
-MX6Q_PAD_EIM_CS0__ECSPI2_SCLK                   297
-MX6Q_PAD_EIM_CS0__MIPI_CORE_DPHY_OUT_24         298
-MX6Q_PAD_EIM_CS0__GPIO_2_23                     299
-MX6Q_PAD_EIM_CS0__TPSMP_HDATA_7                 300
-MX6Q_PAD_EIM_CS1__WEIM_WEIM_CS_1                301
-MX6Q_PAD_EIM_CS1__IPU1_DI1_PIN6                 302
-MX6Q_PAD_EIM_CS1__ECSPI2_MOSI                   303
-MX6Q_PAD_EIM_CS1__MIPI_CORE_DPHY_OUT_25         304
-MX6Q_PAD_EIM_CS1__GPIO_2_24                     305
-MX6Q_PAD_EIM_CS1__TPSMP_HDATA_8                 306
-MX6Q_PAD_EIM_OE__WEIM_WEIM_OE                   307
-MX6Q_PAD_EIM_OE__IPU1_DI1_PIN7                  308
-MX6Q_PAD_EIM_OE__ECSPI2_MISO                    309
-MX6Q_PAD_EIM_OE__MIPI_CORE_DPHY_OUT_26          310
-MX6Q_PAD_EIM_OE__GPIO_2_25                      311
-MX6Q_PAD_EIM_OE__TPSMP_HDATA_9                  312
-MX6Q_PAD_EIM_RW__WEIM_WEIM_RW                   313
-MX6Q_PAD_EIM_RW__IPU1_DI1_PIN8                  314
-MX6Q_PAD_EIM_RW__ECSPI2_SS0                     315
-MX6Q_PAD_EIM_RW__MIPI_CORE_DPHY_OUT_27          316
-MX6Q_PAD_EIM_RW__GPIO_2_26                      317
-MX6Q_PAD_EIM_RW__TPSMP_HDATA_10                 318
-MX6Q_PAD_EIM_RW__SRC_BT_CFG_29                  319
-MX6Q_PAD_EIM_LBA__WEIM_WEIM_LBA                 320
-MX6Q_PAD_EIM_LBA__IPU1_DI1_PIN17                321
-MX6Q_PAD_EIM_LBA__ECSPI2_SS1                    322
-MX6Q_PAD_EIM_LBA__GPIO_2_27                     323
-MX6Q_PAD_EIM_LBA__TPSMP_HDATA_11                324
-MX6Q_PAD_EIM_LBA__SRC_BT_CFG_26                 325
-MX6Q_PAD_EIM_EB0__WEIM_WEIM_EB_0                326
-MX6Q_PAD_EIM_EB0__IPU1_DISP1_DAT_11             327
-MX6Q_PAD_EIM_EB0__IPU2_CSI1_D_11                328
-MX6Q_PAD_EIM_EB0__MIPI_CORE_DPHY_OUT_0          329
-MX6Q_PAD_EIM_EB0__CCM_PMIC_RDY                  330
-MX6Q_PAD_EIM_EB0__GPIO_2_28                     331
-MX6Q_PAD_EIM_EB0__TPSMP_HDATA_12                332
-MX6Q_PAD_EIM_EB0__SRC_BT_CFG_27                 333
-MX6Q_PAD_EIM_EB1__WEIM_WEIM_EB_1                334
-MX6Q_PAD_EIM_EB1__IPU1_DISP1_DAT_10             335
-MX6Q_PAD_EIM_EB1__IPU2_CSI1_D_10                336
-MX6Q_PAD_EIM_EB1__MIPI_CORE_DPHY__OUT_1         337
-MX6Q_PAD_EIM_EB1__GPIO_2_29                     338
-MX6Q_PAD_EIM_EB1__TPSMP_HDATA_13                339
-MX6Q_PAD_EIM_EB1__SRC_BT_CFG_28                 340
-MX6Q_PAD_EIM_DA0__WEIM_WEIM_DA_A_0              341
-MX6Q_PAD_EIM_DA0__IPU1_DISP1_DAT_9              342
-MX6Q_PAD_EIM_DA0__IPU2_CSI1_D_9                 343
-MX6Q_PAD_EIM_DA0__MIPI_CORE_DPHY__OUT_2         344
-MX6Q_PAD_EIM_DA0__GPIO_3_0                      345
-MX6Q_PAD_EIM_DA0__TPSMP_HDATA_14                346
-MX6Q_PAD_EIM_DA0__SRC_BT_CFG_0                  347
-MX6Q_PAD_EIM_DA1__WEIM_WEIM_DA_A_1              348
-MX6Q_PAD_EIM_DA1__IPU1_DISP1_DAT_8              349
-MX6Q_PAD_EIM_DA1__IPU2_CSI1_D_8                 350
-MX6Q_PAD_EIM_DA1__MIPI_CORE_DPHY_OUT_3          351
-MX6Q_PAD_EIM_DA1__USBPHY1_TX_LS_MODE            352
-MX6Q_PAD_EIM_DA1__GPIO_3_1                      353
-MX6Q_PAD_EIM_DA1__TPSMP_HDATA_15                354
-MX6Q_PAD_EIM_DA1__SRC_BT_CFG_1                  355
-MX6Q_PAD_EIM_DA2__WEIM_WEIM_DA_A_2              356
-MX6Q_PAD_EIM_DA2__IPU1_DISP1_DAT_7              357
-MX6Q_PAD_EIM_DA2__IPU2_CSI1_D_7                 358
-MX6Q_PAD_EIM_DA2__MIPI_CORE_DPHY_OUT_4          359
-MX6Q_PAD_EIM_DA2__USBPHY1_TX_HS_MODE            360
-MX6Q_PAD_EIM_DA2__GPIO_3_2                      361
-MX6Q_PAD_EIM_DA2__TPSMP_HDATA_16                362
-MX6Q_PAD_EIM_DA2__SRC_BT_CFG_2                  363
-MX6Q_PAD_EIM_DA3__WEIM_WEIM_DA_A_3              364
-MX6Q_PAD_EIM_DA3__IPU1_DISP1_DAT_6              365
-MX6Q_PAD_EIM_DA3__IPU2_CSI1_D_6                 366
-MX6Q_PAD_EIM_DA3__MIPI_CORE_DPHY_OUT_5          367
-MX6Q_PAD_EIM_DA3__USBPHY1_TX_HIZ                368
-MX6Q_PAD_EIM_DA3__GPIO_3_3                      369
-MX6Q_PAD_EIM_DA3__TPSMP_HDATA_17                370
-MX6Q_PAD_EIM_DA3__SRC_BT_CFG_3                  371
-MX6Q_PAD_EIM_DA4__WEIM_WEIM_DA_A_4              372
-MX6Q_PAD_EIM_DA4__IPU1_DISP1_DAT_5              373
-MX6Q_PAD_EIM_DA4__IPU2_CSI1_D_5                 374
-MX6Q_PAD_EIM_DA4__MIPI_CORE_DPHY_OUT_6          375
-MX6Q_PAD_EIM_DA4__ANATOP_USBPHY1_TX_EN          376
-MX6Q_PAD_EIM_DA4__GPIO_3_4                      377
-MX6Q_PAD_EIM_DA4__TPSMP_HDATA_18                378
-MX6Q_PAD_EIM_DA4__SRC_BT_CFG_4                  379
-MX6Q_PAD_EIM_DA5__WEIM_WEIM_DA_A_5              380
-MX6Q_PAD_EIM_DA5__IPU1_DISP1_DAT_4              381
-MX6Q_PAD_EIM_DA5__IPU2_CSI1_D_4                 382
-MX6Q_PAD_EIM_DA5__MIPI_CORE_DPHY_OUT_7          383
-MX6Q_PAD_EIM_DA5__ANATOP_USBPHY1_TX_DP          384
-MX6Q_PAD_EIM_DA5__GPIO_3_5                      385
-MX6Q_PAD_EIM_DA5__TPSMP_HDATA_19                386
-MX6Q_PAD_EIM_DA5__SRC_BT_CFG_5                  387
-MX6Q_PAD_EIM_DA6__WEIM_WEIM_DA_A_6              388
-MX6Q_PAD_EIM_DA6__IPU1_DISP1_DAT_3              389
-MX6Q_PAD_EIM_DA6__IPU2_CSI1_D_3                 390
-MX6Q_PAD_EIM_DA6__MIPI_CORE_DPHY_OUT_8          391
-MX6Q_PAD_EIM_DA6__ANATOP_USBPHY1_TX_DN          392
-MX6Q_PAD_EIM_DA6__GPIO_3_6                      393
-MX6Q_PAD_EIM_DA6__TPSMP_HDATA_20                394
-MX6Q_PAD_EIM_DA6__SRC_BT_CFG_6                  395
-MX6Q_PAD_EIM_DA7__WEIM_WEIM_DA_A_7              396
-MX6Q_PAD_EIM_DA7__IPU1_DISP1_DAT_2              397
-MX6Q_PAD_EIM_DA7__IPU2_CSI1_D_2                 398
-MX6Q_PAD_EIM_DA7__MIPI_CORE_DPHY_OUT_9          399
-MX6Q_PAD_EIM_DA7__GPIO_3_7                      400
-MX6Q_PAD_EIM_DA7__TPSMP_HDATA_21                401
-MX6Q_PAD_EIM_DA7__SRC_BT_CFG_7                  402
-MX6Q_PAD_EIM_DA8__WEIM_WEIM_DA_A_8              403
-MX6Q_PAD_EIM_DA8__IPU1_DISP1_DAT_1              404
-MX6Q_PAD_EIM_DA8__IPU2_CSI1_D_1                 405
-MX6Q_PAD_EIM_DA8__MIPI_CORE_DPHY_OUT_10         406
-MX6Q_PAD_EIM_DA8__GPIO_3_8                      407
-MX6Q_PAD_EIM_DA8__TPSMP_HDATA_22                408
-MX6Q_PAD_EIM_DA8__SRC_BT_CFG_8                  409
-MX6Q_PAD_EIM_DA9__WEIM_WEIM_DA_A_9              410
-MX6Q_PAD_EIM_DA9__IPU1_DISP1_DAT_0              411
-MX6Q_PAD_EIM_DA9__IPU2_CSI1_D_0                 412
-MX6Q_PAD_EIM_DA9__MIPI_CORE_DPHY_OUT_11         413
-MX6Q_PAD_EIM_DA9__GPIO_3_9                      414
-MX6Q_PAD_EIM_DA9__TPSMP_HDATA_23                415
-MX6Q_PAD_EIM_DA9__SRC_BT_CFG_9                  416
-MX6Q_PAD_EIM_DA10__WEIM_WEIM_DA_A_10            417
-MX6Q_PAD_EIM_DA10__IPU1_DI1_PIN15               418
-MX6Q_PAD_EIM_DA10__IPU2_CSI1_DATA_EN            419
-MX6Q_PAD_EIM_DA10__MIPI_CORE_DPHY_OUT12         420
-MX6Q_PAD_EIM_DA10__GPIO_3_10                    421
-MX6Q_PAD_EIM_DA10__TPSMP_HDATA_24               422
-MX6Q_PAD_EIM_DA10__SRC_BT_CFG_10                423
-MX6Q_PAD_EIM_DA11__WEIM_WEIM_DA_A_11            424
-MX6Q_PAD_EIM_DA11__IPU1_DI1_PIN2                425
-MX6Q_PAD_EIM_DA11__IPU2_CSI1_HSYNC              426
-MX6Q_PAD_EIM_DA11__MIPI_CORE_DPHY_OUT13         427
-MX6Q_PAD_EIM_DA11__SDMA_DBG_EVT_CHN_6           428
-MX6Q_PAD_EIM_DA11__GPIO_3_11                    429
-MX6Q_PAD_EIM_DA11__TPSMP_HDATA_25               430
-MX6Q_PAD_EIM_DA11__SRC_BT_CFG_11                431
-MX6Q_PAD_EIM_DA12__WEIM_WEIM_DA_A_12            432
-MX6Q_PAD_EIM_DA12__IPU1_DI1_PIN3                433
-MX6Q_PAD_EIM_DA12__IPU2_CSI1_VSYNC              434
-MX6Q_PAD_EIM_DA12__MIPI_CORE_DPHY_OUT14         435
-MX6Q_PAD_EIM_DA12__SDMA_DEBUG_EVT_CHN_3         436
-MX6Q_PAD_EIM_DA12__GPIO_3_12                    437
-MX6Q_PAD_EIM_DA12__TPSMP_HDATA_26               438
-MX6Q_PAD_EIM_DA12__SRC_BT_CFG_12                439
-MX6Q_PAD_EIM_DA13__WEIM_WEIM_DA_A_13            440
-MX6Q_PAD_EIM_DA13__IPU1_DI1_D0_CS               441
-MX6Q_PAD_EIM_DA13__CCM_DI1_EXT_CLK              442
-MX6Q_PAD_EIM_DA13__MIPI_CORE_DPHY_OUT15         443
-MX6Q_PAD_EIM_DA13__SDMA_DEBUG_EVT_CHN_4         444
-MX6Q_PAD_EIM_DA13__GPIO_3_13                    445
-MX6Q_PAD_EIM_DA13__TPSMP_HDATA_27               446
-MX6Q_PAD_EIM_DA13__SRC_BT_CFG_13                447
-MX6Q_PAD_EIM_DA14__WEIM_WEIM_DA_A_14            448
-MX6Q_PAD_EIM_DA14__IPU1_DI1_D1_CS               449
-MX6Q_PAD_EIM_DA14__CCM_DI0_EXT_CLK              450
-MX6Q_PAD_EIM_DA14__MIPI_CORE_DPHY_OUT16         451
-MX6Q_PAD_EIM_DA14__SDMA_DEBUG_EVT_CHN_5         452
-MX6Q_PAD_EIM_DA14__GPIO_3_14                    453
-MX6Q_PAD_EIM_DA14__TPSMP_HDATA_28               454
-MX6Q_PAD_EIM_DA14__SRC_BT_CFG_14                455
-MX6Q_PAD_EIM_DA15__WEIM_WEIM_DA_A_15            456
-MX6Q_PAD_EIM_DA15__IPU1_DI1_PIN1                457
-MX6Q_PAD_EIM_DA15__IPU1_DI1_PIN4                458
-MX6Q_PAD_EIM_DA15__MIPI_CORE_DPHY_OUT17         459
-MX6Q_PAD_EIM_DA15__GPIO_3_15                    460
-MX6Q_PAD_EIM_DA15__TPSMP_HDATA_29               461
-MX6Q_PAD_EIM_DA15__SRC_BT_CFG_15                462
-MX6Q_PAD_EIM_WAIT__WEIM_WEIM_WAIT               463
-MX6Q_PAD_EIM_WAIT__WEIM_WEIM_DTACK_B            464
-MX6Q_PAD_EIM_WAIT__GPIO_5_0                     465
-MX6Q_PAD_EIM_WAIT__TPSMP_HDATA_30               466
-MX6Q_PAD_EIM_WAIT__SRC_BT_CFG_25                467
-MX6Q_PAD_EIM_BCLK__WEIM_WEIM_BCLK               468
-MX6Q_PAD_EIM_BCLK__IPU1_DI1_PIN16               469
-MX6Q_PAD_EIM_BCLK__GPIO_6_31                    470
-MX6Q_PAD_EIM_BCLK__TPSMP_HDATA_31               471
-MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DSP_CLK         472
-MX6Q_PAD_DI0_DISP_CLK__IPU2_DI0_DSP_CLK         473
-MX6Q_PAD_DI0_DISP_CLK__MIPI_CR_DPY_OT28         474
-MX6Q_PAD_DI0_DISP_CLK__SDMA_DBG_CR_STA0         475
-MX6Q_PAD_DI0_DISP_CLK__GPIO_4_16                476
-MX6Q_PAD_DI0_DISP_CLK__MMDC_DEBUG_0             477
-MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15              478
-MX6Q_PAD_DI0_PIN15__IPU2_DI0_PIN15              479
-MX6Q_PAD_DI0_PIN15__AUDMUX_AUD6_TXC             480
-MX6Q_PAD_DI0_PIN15__MIPI_CR_DPHY_OUT_29         481
-MX6Q_PAD_DI0_PIN15__SDMA_DBG_CORE_STA_1         482
-MX6Q_PAD_DI0_PIN15__GPIO_4_17                   483
-MX6Q_PAD_DI0_PIN15__MMDC_MMDC_DEBUG_1           484
-MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN2                485
-MX6Q_PAD_DI0_PIN2__IPU2_DI0_PIN2                486
-MX6Q_PAD_DI0_PIN2__AUDMUX_AUD6_TXD              487
-MX6Q_PAD_DI0_PIN2__MIPI_CR_DPHY_OUT_30          488
-MX6Q_PAD_DI0_PIN2__SDMA_DBG_CORE_STA_2          489
-MX6Q_PAD_DI0_PIN2__GPIO_4_18                    490
-MX6Q_PAD_DI0_PIN2__MMDC_DEBUG_2                 491
-MX6Q_PAD_DI0_PIN2__PL301_PER1_HADDR_9           492
-MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN3                493
-MX6Q_PAD_DI0_PIN3__IPU2_DI0_PIN3                494
-MX6Q_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS             495
-MX6Q_PAD_DI0_PIN3__MIPI_CORE_DPHY_OUT31         496
-MX6Q_PAD_DI0_PIN3__SDMA_DBG_CORE_STA_3          497
-MX6Q_PAD_DI0_PIN3__GPIO_4_19                    498
-MX6Q_PAD_DI0_PIN3__MMDC_MMDC_DEBUG_3            499
-MX6Q_PAD_DI0_PIN3__PL301_PER1_HADDR_10          500
-MX6Q_PAD_DI0_PIN4__IPU1_DI0_PIN4                501
-MX6Q_PAD_DI0_PIN4__IPU2_DI0_PIN4                502
-MX6Q_PAD_DI0_PIN4__AUDMUX_AUD6_RXD              503
-MX6Q_PAD_DI0_PIN4__USDHC1_WP                    504
-MX6Q_PAD_DI0_PIN4__SDMA_DEBUG_YIELD             505
-MX6Q_PAD_DI0_PIN4__GPIO_4_20                    506
-MX6Q_PAD_DI0_PIN4__MMDC_MMDC_DEBUG_4            507
-MX6Q_PAD_DI0_PIN4__PL301_PER1_HADDR_11          508
-MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0           509
-MX6Q_PAD_DISP0_DAT0__IPU2_DISP0_DAT_0           510
-MX6Q_PAD_DISP0_DAT0__ECSPI3_SCLK                511
-MX6Q_PAD_DISP0_DAT0__USDHC1_USDHC_DBG_0         512
-MX6Q_PAD_DISP0_DAT0__SDMA_DBG_CORE_RUN          513
-MX6Q_PAD_DISP0_DAT0__GPIO_4_21                  514
-MX6Q_PAD_DISP0_DAT0__MMDC_MMDC_DEBUG_5          515
-MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1           516
-MX6Q_PAD_DISP0_DAT1__IPU2_DISP0_DAT_1           517
-MX6Q_PAD_DISP0_DAT1__ECSPI3_MOSI                518
-MX6Q_PAD_DISP0_DAT1__USDHC1_USDHC_DBG_1         519
-MX6Q_PAD_DISP0_DAT1__SDMA_DBG_EVT_CHNSL         520
-MX6Q_PAD_DISP0_DAT1__GPIO_4_22                  521
-MX6Q_PAD_DISP0_DAT1__MMDC_DEBUG_6               522
-MX6Q_PAD_DISP0_DAT1__PL301_PER1_HADR_12         523
-MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2           524
-MX6Q_PAD_DISP0_DAT2__IPU2_DISP0_DAT_2           525
-MX6Q_PAD_DISP0_DAT2__ECSPI3_MISO                526
-MX6Q_PAD_DISP0_DAT2__USDHC1_USDHC_DBG_2         527
-MX6Q_PAD_DISP0_DAT2__SDMA_DEBUG_MODE            528
-MX6Q_PAD_DISP0_DAT2__GPIO_4_23                  529
-MX6Q_PAD_DISP0_DAT2__MMDC_DEBUG_7               530
-MX6Q_PAD_DISP0_DAT2__PL301_PER1_HADR_13         531
-MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3           532
-MX6Q_PAD_DISP0_DAT3__IPU2_DISP0_DAT_3           533
-MX6Q_PAD_DISP0_DAT3__ECSPI3_SS0                 534
-MX6Q_PAD_DISP0_DAT3__USDHC1_USDHC_DBG_3         535
-MX6Q_PAD_DISP0_DAT3__SDMA_DBG_BUS_ERROR         536
-MX6Q_PAD_DISP0_DAT3__GPIO_4_24                  537
-MX6Q_PAD_DISP0_DAT3__MMDC_MMDC_DBG_8            538
-MX6Q_PAD_DISP0_DAT3__PL301_PER1_HADR_14         539
-MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4           540
-MX6Q_PAD_DISP0_DAT4__IPU2_DISP0_DAT_4           541
-MX6Q_PAD_DISP0_DAT4__ECSPI3_SS1                 542
-MX6Q_PAD_DISP0_DAT4__USDHC1_USDHC_DBG_4         543
-MX6Q_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB         544
-MX6Q_PAD_DISP0_DAT4__GPIO_4_25                  545
-MX6Q_PAD_DISP0_DAT4__MMDC_MMDC_DEBUG_9          546
-MX6Q_PAD_DISP0_DAT4__PL301_PER1_HADR_15         547
-MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5           548
-MX6Q_PAD_DISP0_DAT5__IPU2_DISP0_DAT_5           549
-MX6Q_PAD_DISP0_DAT5__ECSPI3_SS2                 550
-MX6Q_PAD_DISP0_DAT5__AUDMUX_AUD6_RXFS           551
-MX6Q_PAD_DISP0_DAT5__SDMA_DBG_MCH_DMBUS         552
-MX6Q_PAD_DISP0_DAT5__GPIO_4_26                  553
-MX6Q_PAD_DISP0_DAT5__MMDC_DEBUG_10              554
-MX6Q_PAD_DISP0_DAT5__PL301_PER1_HADR_16         555
-MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6           556
-MX6Q_PAD_DISP0_DAT6__IPU2_DISP0_DAT_6           557
-MX6Q_PAD_DISP0_DAT6__ECSPI3_SS3                 558
-MX6Q_PAD_DISP0_DAT6__AUDMUX_AUD6_RXC            559
-MX6Q_PAD_DISP0_DAT6__SDMA_DBG_RTBUF_WRT         560
-MX6Q_PAD_DISP0_DAT6__GPIO_4_27                  561
-MX6Q_PAD_DISP0_DAT6__MMDC_DEBUG_11              562
-MX6Q_PAD_DISP0_DAT6__PL301_PER1_HADR_17         563
-MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7           564
-MX6Q_PAD_DISP0_DAT7__IPU2_DISP0_DAT_7           565
-MX6Q_PAD_DISP0_DAT7__ECSPI3_RDY                 566
-MX6Q_PAD_DISP0_DAT7__USDHC1_USDHC_DBG_5         567
-MX6Q_PAD_DISP0_DAT7__SDMA_DBG_EVT_CHN_0         568
-MX6Q_PAD_DISP0_DAT7__GPIO_4_28                  569
-MX6Q_PAD_DISP0_DAT7__MMDC_DEBUG_12              570
-MX6Q_PAD_DISP0_DAT7__PL301_PER1_HADR_18         571
-MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8           572
-MX6Q_PAD_DISP0_DAT8__IPU2_DISP0_DAT_8           573
-MX6Q_PAD_DISP0_DAT8__PWM1_PWMO                  574
-MX6Q_PAD_DISP0_DAT8__WDOG1_WDOG_B               575
-MX6Q_PAD_DISP0_DAT8__SDMA_DBG_EVT_CHN_1         576
-MX6Q_PAD_DISP0_DAT8__GPIO_4_29                  577
-MX6Q_PAD_DISP0_DAT8__MMDC_DEBUG_13              578
-MX6Q_PAD_DISP0_DAT8__PL301_PER1_HADR_19         579
-MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9           580
-MX6Q_PAD_DISP0_DAT9__IPU2_DISP0_DAT_9           581
-MX6Q_PAD_DISP0_DAT9__PWM2_PWMO                  582
-MX6Q_PAD_DISP0_DAT9__WDOG2_WDOG_B               583
-MX6Q_PAD_DISP0_DAT9__SDMA_DBG_EVT_CHN_2         584
-MX6Q_PAD_DISP0_DAT9__GPIO_4_30                  585
-MX6Q_PAD_DISP0_DAT9__MMDC_DEBUG_14              586
-MX6Q_PAD_DISP0_DAT9__PL301_PER1_HADR_20         587
-MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10         588
-MX6Q_PAD_DISP0_DAT10__IPU2_DISP0_DAT_10         589
-MX6Q_PAD_DISP0_DAT10__USDHC1_DBG_6              590
-MX6Q_PAD_DISP0_DAT10__SDMA_DBG_EVT_CHN3         591
-MX6Q_PAD_DISP0_DAT10__GPIO_4_31                 592
-MX6Q_PAD_DISP0_DAT10__MMDC_DEBUG_15             593
-MX6Q_PAD_DISP0_DAT10__PL301_PER1_HADR21         594
-MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11         595
-MX6Q_PAD_DISP0_DAT11__IPU2_DISP0_DAT_11         596
-MX6Q_PAD_DISP0_DAT11__USDHC1_USDHC_DBG7         597
-MX6Q_PAD_DISP0_DAT11__SDMA_DBG_EVT_CHN4         598
-MX6Q_PAD_DISP0_DAT11__GPIO_5_5                  599
-MX6Q_PAD_DISP0_DAT11__MMDC_DEBUG_16             600
-MX6Q_PAD_DISP0_DAT11__PL301_PER1_HADR22         601
-MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12         602
-MX6Q_PAD_DISP0_DAT12__IPU2_DISP0_DAT_12         603
-MX6Q_PAD_DISP0_DAT12__RESERVED_RESERVED         604
-MX6Q_PAD_DISP0_DAT12__SDMA_DBG_EVT_CHN5         605
-MX6Q_PAD_DISP0_DAT12__GPIO_5_6                  606
-MX6Q_PAD_DISP0_DAT12__MMDC_DEBUG_17             607
-MX6Q_PAD_DISP0_DAT12__PL301_PER1_HADR23         608
-MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13         609
-MX6Q_PAD_DISP0_DAT13__IPU2_DISP0_DAT_13         610
-MX6Q_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS          611
-MX6Q_PAD_DISP0_DAT13__SDMA_DBG_EVT_CHN0         612
-MX6Q_PAD_DISP0_DAT13__GPIO_5_7                  613
-MX6Q_PAD_DISP0_DAT13__MMDC_DEBUG_18             614
-MX6Q_PAD_DISP0_DAT13__PL301_PER1_HADR24         615
-MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14         616
-MX6Q_PAD_DISP0_DAT14__IPU2_DISP0_DAT_14         617
-MX6Q_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC           618
-MX6Q_PAD_DISP0_DAT14__SDMA_DBG_EVT_CHN1         619
-MX6Q_PAD_DISP0_DAT14__GPIO_5_8                  620
-MX6Q_PAD_DISP0_DAT14__MMDC_DEBUG_19             621
-MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15         622
-MX6Q_PAD_DISP0_DAT15__IPU2_DISP0_DAT_15         623
-MX6Q_PAD_DISP0_DAT15__ECSPI1_SS1                624
-MX6Q_PAD_DISP0_DAT15__ECSPI2_SS1                625
-MX6Q_PAD_DISP0_DAT15__SDMA_DBG_EVT_CHN2         626
-MX6Q_PAD_DISP0_DAT15__GPIO_5_9                  627
-MX6Q_PAD_DISP0_DAT15__MMDC_DEBUG_20             628
-MX6Q_PAD_DISP0_DAT15__PL301_PER1_HADR25         629
-MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16         630
-MX6Q_PAD_DISP0_DAT16__IPU2_DISP0_DAT_16         631
-MX6Q_PAD_DISP0_DAT16__ECSPI2_MOSI               632
-MX6Q_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC           633
-MX6Q_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0          634
-MX6Q_PAD_DISP0_DAT16__GPIO_5_10                 635
-MX6Q_PAD_DISP0_DAT16__MMDC_DEBUG_21             636
-MX6Q_PAD_DISP0_DAT16__PL301_PER1_HADR26         637
-MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17         638
-MX6Q_PAD_DISP0_DAT17__IPU2_DISP0_DAT_17         639
-MX6Q_PAD_DISP0_DAT17__ECSPI2_MISO               640
-MX6Q_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD           641
-MX6Q_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1          642
-MX6Q_PAD_DISP0_DAT17__GPIO_5_11                 643
-MX6Q_PAD_DISP0_DAT17__MMDC_DEBUG_22             644
-MX6Q_PAD_DISP0_DAT17__PL301_PER1_HADR27         645
-MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18         646
-MX6Q_PAD_DISP0_DAT18__IPU2_DISP0_DAT_18         647
-MX6Q_PAD_DISP0_DAT18__ECSPI2_SS0                648
-MX6Q_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS          649
-MX6Q_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS          650
-MX6Q_PAD_DISP0_DAT18__GPIO_5_12                 651
-MX6Q_PAD_DISP0_DAT18__MMDC_DEBUG_23             652
-MX6Q_PAD_DISP0_DAT18__WEIM_WEIM_CS_2            653
-MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19         654
-MX6Q_PAD_DISP0_DAT19__IPU2_DISP0_DAT_19         655
-MX6Q_PAD_DISP0_DAT19__ECSPI2_SCLK               656
-MX6Q_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD           657
-MX6Q_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC           658
-MX6Q_PAD_DISP0_DAT19__GPIO_5_13                 659
-MX6Q_PAD_DISP0_DAT19__MMDC_DEBUG_24             660
-MX6Q_PAD_DISP0_DAT19__WEIM_WEIM_CS_3            661
-MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20         662
-MX6Q_PAD_DISP0_DAT20__IPU2_DISP0_DAT_20         663
-MX6Q_PAD_DISP0_DAT20__ECSPI1_SCLK               664
-MX6Q_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC           665
-MX6Q_PAD_DISP0_DAT20__SDMA_DBG_EVT_CHN7         666
-MX6Q_PAD_DISP0_DAT20__GPIO_5_14                 667
-MX6Q_PAD_DISP0_DAT20__MMDC_DEBUG_25             668
-MX6Q_PAD_DISP0_DAT20__PL301_PER1_HADR28         669
-MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21         670
-MX6Q_PAD_DISP0_DAT21__IPU2_DISP0_DAT_21         671
-MX6Q_PAD_DISP0_DAT21__ECSPI1_MOSI               672
-MX6Q_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD           673
-MX6Q_PAD_DISP0_DAT21__SDMA_DBG_BUS_DEV0         674
-MX6Q_PAD_DISP0_DAT21__GPIO_5_15                 675
-MX6Q_PAD_DISP0_DAT21__MMDC_DEBUG_26             676
-MX6Q_PAD_DISP0_DAT21__PL301_PER1_HADR29         677
-MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22         678
-MX6Q_PAD_DISP0_DAT22__IPU2_DISP0_DAT_22         679
-MX6Q_PAD_DISP0_DAT22__ECSPI1_MISO               680
-MX6Q_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS          681
-MX6Q_PAD_DISP0_DAT22__SDMA_DBG_BUS_DEV1         682
-MX6Q_PAD_DISP0_DAT22__GPIO_5_16                 683
-MX6Q_PAD_DISP0_DAT22__MMDC_DEBUG_27             684
-MX6Q_PAD_DISP0_DAT22__PL301_PER1_HADR30         685
-MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23         686
-MX6Q_PAD_DISP0_DAT23__IPU2_DISP0_DAT_23         687
-MX6Q_PAD_DISP0_DAT23__ECSPI1_SS0                688
-MX6Q_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD           689
-MX6Q_PAD_DISP0_DAT23__SDMA_DBG_BUS_DEV2         690
-MX6Q_PAD_DISP0_DAT23__GPIO_5_17                 691
-MX6Q_PAD_DISP0_DAT23__MMDC_DEBUG_28             692
-MX6Q_PAD_DISP0_DAT23__PL301_PER1_HADR31         693
-MX6Q_PAD_ENET_MDIO__RESERVED_RESERVED           694
-MX6Q_PAD_ENET_MDIO__ENET_MDIO                   695
-MX6Q_PAD_ENET_MDIO__ESAI1_SCKR                  696
-MX6Q_PAD_ENET_MDIO__SDMA_DEBUG_BUS_DEV3         697
-MX6Q_PAD_ENET_MDIO__ENET_1588_EVT1_OUT          698
-MX6Q_PAD_ENET_MDIO__GPIO_1_22                   699
-MX6Q_PAD_ENET_MDIO__SPDIF_PLOCK                 700
-MX6Q_PAD_ENET_REF_CLK__RESERVED_RSRVED          701
-MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK              702
-MX6Q_PAD_ENET_REF_CLK__ESAI1_FSR                703
-MX6Q_PAD_ENET_REF_CLK__SDMA_DBGBUS_DEV4         704
-MX6Q_PAD_ENET_REF_CLK__GPIO_1_23                705
-MX6Q_PAD_ENET_REF_CLK__SPDIF_SRCLK              706
-MX6Q_PAD_ENET_REF_CLK__USBPHY1_RX_SQH           707
-MX6Q_PAD_ENET_RX_ER__ENET_RX_ER                 708
-MX6Q_PAD_ENET_RX_ER__ESAI1_HCKR                 709
-MX6Q_PAD_ENET_RX_ER__SPDIF_IN1                  710
-MX6Q_PAD_ENET_RX_ER__ENET_1588_EVT2_OUT         711
-MX6Q_PAD_ENET_RX_ER__GPIO_1_24                  712
-MX6Q_PAD_ENET_RX_ER__PHY_TDI                    713
-MX6Q_PAD_ENET_RX_ER__USBPHY1_RX_HS_RXD          714
-MX6Q_PAD_ENET_CRS_DV__RESERVED_RSRVED           715
-MX6Q_PAD_ENET_CRS_DV__ENET_RX_EN                716
-MX6Q_PAD_ENET_CRS_DV__ESAI1_SCKT                717
-MX6Q_PAD_ENET_CRS_DV__SPDIF_EXTCLK              718
-MX6Q_PAD_ENET_CRS_DV__GPIO_1_25                 719
-MX6Q_PAD_ENET_CRS_DV__PHY_TDO                   720
-MX6Q_PAD_ENET_CRS_DV__USBPHY1_RX_FS_RXD         721
-MX6Q_PAD_ENET_RXD1__MLB_MLBSIG                  722
-MX6Q_PAD_ENET_RXD1__ENET_RDATA_1                723
-MX6Q_PAD_ENET_RXD1__ESAI1_FST                   724
-MX6Q_PAD_ENET_RXD1__ENET_1588_EVT3_OUT          725
-MX6Q_PAD_ENET_RXD1__GPIO_1_26                   726
-MX6Q_PAD_ENET_RXD1__PHY_TCK                     727
-MX6Q_PAD_ENET_RXD1__USBPHY1_RX_DISCON           728
-MX6Q_PAD_ENET_RXD0__OSC32K_32K_OUT              729
-MX6Q_PAD_ENET_RXD0__ENET_RDATA_0                730
-MX6Q_PAD_ENET_RXD0__ESAI1_HCKT                  731
-MX6Q_PAD_ENET_RXD0__SPDIF_OUT1                  732
-MX6Q_PAD_ENET_RXD0__GPIO_1_27                   733
-MX6Q_PAD_ENET_RXD0__PHY_TMS                     734
-MX6Q_PAD_ENET_RXD0__USBPHY1_PLL_CK20DIV         735
-MX6Q_PAD_ENET_TX_EN__RESERVED_RSRVED            736
-MX6Q_PAD_ENET_TX_EN__ENET_TX_EN                 737
-MX6Q_PAD_ENET_TX_EN__ESAI1_TX3_RX2              738
-MX6Q_PAD_ENET_TX_EN__GPIO_1_28                  739
-MX6Q_PAD_ENET_TX_EN__SATA_PHY_TDI               740
-MX6Q_PAD_ENET_TX_EN__USBPHY2_RX_SQH             741
-MX6Q_PAD_ENET_TXD1__MLB_MLBCLK                  742
-MX6Q_PAD_ENET_TXD1__ENET_TDATA_1                743
-MX6Q_PAD_ENET_TXD1__ESAI1_TX2_RX3               744
-MX6Q_PAD_ENET_TXD1__ENET_1588_EVENT0_IN         745
-MX6Q_PAD_ENET_TXD1__GPIO_1_29                   746
-MX6Q_PAD_ENET_TXD1__SATA_PHY_TDO                747
-MX6Q_PAD_ENET_TXD1__USBPHY2_RX_HS_RXD           748
-MX6Q_PAD_ENET_TXD0__RESERVED_RSRVED             749
-MX6Q_PAD_ENET_TXD0__ENET_TDATA_0                750
-MX6Q_PAD_ENET_TXD0__ESAI1_TX4_RX1               751
-MX6Q_PAD_ENET_TXD0__GPIO_1_30                   752
-MX6Q_PAD_ENET_TXD0__SATA_PHY_TCK                753
-MX6Q_PAD_ENET_TXD0__USBPHY2_RX_FS_RXD           754
-MX6Q_PAD_ENET_MDC__MLB_MLBDAT                   755
-MX6Q_PAD_ENET_MDC__ENET_MDC                     756
-MX6Q_PAD_ENET_MDC__ESAI1_TX5_RX0                757
-MX6Q_PAD_ENET_MDC__ENET_1588_EVENT1_IN          758
-MX6Q_PAD_ENET_MDC__GPIO_1_31                    759
-MX6Q_PAD_ENET_MDC__SATA_PHY_TMS                 760
-MX6Q_PAD_ENET_MDC__USBPHY2_RX_DISCON            761
-MX6Q_PAD_DRAM_D40__MMDC_DRAM_D_40               762
-MX6Q_PAD_DRAM_D41__MMDC_DRAM_D_41               763
-MX6Q_PAD_DRAM_D42__MMDC_DRAM_D_42               764
-MX6Q_PAD_DRAM_D43__MMDC_DRAM_D_43               765
-MX6Q_PAD_DRAM_D44__MMDC_DRAM_D_44               766
-MX6Q_PAD_DRAM_D45__MMDC_DRAM_D_45               767
-MX6Q_PAD_DRAM_D46__MMDC_DRAM_D_46               768
-MX6Q_PAD_DRAM_D47__MMDC_DRAM_D_47               769
-MX6Q_PAD_DRAM_SDQS5__MMDC_DRAM_SDQS_5           770
-MX6Q_PAD_DRAM_DQM5__MMDC_DRAM_DQM_5             771
-MX6Q_PAD_DRAM_D32__MMDC_DRAM_D_32               772
-MX6Q_PAD_DRAM_D33__MMDC_DRAM_D_33               773
-MX6Q_PAD_DRAM_D34__MMDC_DRAM_D_34               774
-MX6Q_PAD_DRAM_D35__MMDC_DRAM_D_35               775
-MX6Q_PAD_DRAM_D36__MMDC_DRAM_D_36               776
-MX6Q_PAD_DRAM_D37__MMDC_DRAM_D_37               777
-MX6Q_PAD_DRAM_D38__MMDC_DRAM_D_38               778
-MX6Q_PAD_DRAM_D39__MMDC_DRAM_D_39               779
-MX6Q_PAD_DRAM_DQM4__MMDC_DRAM_DQM_4             780
-MX6Q_PAD_DRAM_SDQS4__MMDC_DRAM_SDQS_4           781
-MX6Q_PAD_DRAM_D24__MMDC_DRAM_D_24               782
-MX6Q_PAD_DRAM_D25__MMDC_DRAM_D_25               783
-MX6Q_PAD_DRAM_D26__MMDC_DRAM_D_26               784
-MX6Q_PAD_DRAM_D27__MMDC_DRAM_D_27               785
-MX6Q_PAD_DRAM_D28__MMDC_DRAM_D_28               786
-MX6Q_PAD_DRAM_D29__MMDC_DRAM_D_29               787
-MX6Q_PAD_DRAM_SDQS3__MMDC_DRAM_SDQS_3           788
-MX6Q_PAD_DRAM_D30__MMDC_DRAM_D_30               789
-MX6Q_PAD_DRAM_D31__MMDC_DRAM_D_31               790
-MX6Q_PAD_DRAM_DQM3__MMDC_DRAM_DQM_3             791
-MX6Q_PAD_DRAM_D16__MMDC_DRAM_D_16               792
-MX6Q_PAD_DRAM_D17__MMDC_DRAM_D_17               793
-MX6Q_PAD_DRAM_D18__MMDC_DRAM_D_18               794
-MX6Q_PAD_DRAM_D19__MMDC_DRAM_D_19               795
-MX6Q_PAD_DRAM_D20__MMDC_DRAM_D_20               796
-MX6Q_PAD_DRAM_D21__MMDC_DRAM_D_21               797
-MX6Q_PAD_DRAM_D22__MMDC_DRAM_D_22               798
-MX6Q_PAD_DRAM_SDQS2__MMDC_DRAM_SDQS_2           799
-MX6Q_PAD_DRAM_D23__MMDC_DRAM_D_23               800
-MX6Q_PAD_DRAM_DQM2__MMDC_DRAM_DQM_2             801
-MX6Q_PAD_DRAM_A0__MMDC_DRAM_A_0                 802
-MX6Q_PAD_DRAM_A1__MMDC_DRAM_A_1                 803
-MX6Q_PAD_DRAM_A2__MMDC_DRAM_A_2                 804
-MX6Q_PAD_DRAM_A3__MMDC_DRAM_A_3                 805
-MX6Q_PAD_DRAM_A4__MMDC_DRAM_A_4                 806
-MX6Q_PAD_DRAM_A5__MMDC_DRAM_A_5                 807
-MX6Q_PAD_DRAM_A6__MMDC_DRAM_A_6                 808
-MX6Q_PAD_DRAM_A7__MMDC_DRAM_A_7                 809
-MX6Q_PAD_DRAM_A8__MMDC_DRAM_A_8                 810
-MX6Q_PAD_DRAM_A9__MMDC_DRAM_A_9                 811
-MX6Q_PAD_DRAM_A10__MMDC_DRAM_A_10               812
-MX6Q_PAD_DRAM_A11__MMDC_DRAM_A_11               813
-MX6Q_PAD_DRAM_A12__MMDC_DRAM_A_12               814
-MX6Q_PAD_DRAM_A13__MMDC_DRAM_A_13               815
-MX6Q_PAD_DRAM_A14__MMDC_DRAM_A_14               816
-MX6Q_PAD_DRAM_A15__MMDC_DRAM_A_15               817
-MX6Q_PAD_DRAM_CAS__MMDC_DRAM_CAS                818
-MX6Q_PAD_DRAM_CS0__MMDC_DRAM_CS_0               819
-MX6Q_PAD_DRAM_CS1__MMDC_DRAM_CS_1               820
-MX6Q_PAD_DRAM_RAS__MMDC_DRAM_RAS                821
-MX6Q_PAD_DRAM_RESET__MMDC_DRAM_RESET            822
-MX6Q_PAD_DRAM_SDBA0__MMDC_DRAM_SDBA_0           823
-MX6Q_PAD_DRAM_SDBA1__MMDC_DRAM_SDBA_1           824
-MX6Q_PAD_DRAM_SDCLK_0__MMDC_DRAM_SDCLK0         825
-MX6Q_PAD_DRAM_SDBA2__MMDC_DRAM_SDBA_2           826
-MX6Q_PAD_DRAM_SDCKE0__MMDC_DRAM_SDCKE_0         827
-MX6Q_PAD_DRAM_SDCLK_1__MMDC_DRAM_SDCLK1         828
-MX6Q_PAD_DRAM_SDCKE1__MMDC_DRAM_SDCKE_1         829
-MX6Q_PAD_DRAM_SDODT0__MMDC_DRAM_ODT_0           830
-MX6Q_PAD_DRAM_SDODT1__MMDC_DRAM_ODT_1           831
-MX6Q_PAD_DRAM_SDWE__MMDC_DRAM_SDWE              832
-MX6Q_PAD_DRAM_D0__MMDC_DRAM_D_0                 833
-MX6Q_PAD_DRAM_D1__MMDC_DRAM_D_1                 834
-MX6Q_PAD_DRAM_D2__MMDC_DRAM_D_2                 835
-MX6Q_PAD_DRAM_D3__MMDC_DRAM_D_3                 836
-MX6Q_PAD_DRAM_D4__MMDC_DRAM_D_4                 837
-MX6Q_PAD_DRAM_D5__MMDC_DRAM_D_5                 838
-MX6Q_PAD_DRAM_SDQS0__MMDC_DRAM_SDQS_0           839
-MX6Q_PAD_DRAM_D6__MMDC_DRAM_D_6                 840
-MX6Q_PAD_DRAM_D7__MMDC_DRAM_D_7                 841
-MX6Q_PAD_DRAM_DQM0__MMDC_DRAM_DQM_0             842
-MX6Q_PAD_DRAM_D8__MMDC_DRAM_D_8                 843
-MX6Q_PAD_DRAM_D9__MMDC_DRAM_D_9                 844
-MX6Q_PAD_DRAM_D10__MMDC_DRAM_D_10               845
-MX6Q_PAD_DRAM_D11__MMDC_DRAM_D_11               846
-MX6Q_PAD_DRAM_D12__MMDC_DRAM_D_12               847
-MX6Q_PAD_DRAM_D13__MMDC_DRAM_D_13               848
-MX6Q_PAD_DRAM_D14__MMDC_DRAM_D_14               849
-MX6Q_PAD_DRAM_SDQS1__MMDC_DRAM_SDQS_1           850
-MX6Q_PAD_DRAM_D15__MMDC_DRAM_D_15               851
-MX6Q_PAD_DRAM_DQM1__MMDC_DRAM_DQM_1             852
-MX6Q_PAD_DRAM_D48__MMDC_DRAM_D_48               853
-MX6Q_PAD_DRAM_D49__MMDC_DRAM_D_49               854
-MX6Q_PAD_DRAM_D50__MMDC_DRAM_D_50               855
-MX6Q_PAD_DRAM_D51__MMDC_DRAM_D_51               856
-MX6Q_PAD_DRAM_D52__MMDC_DRAM_D_52               857
-MX6Q_PAD_DRAM_D53__MMDC_DRAM_D_53               858
-MX6Q_PAD_DRAM_D54__MMDC_DRAM_D_54               859
-MX6Q_PAD_DRAM_D55__MMDC_DRAM_D_55               860
-MX6Q_PAD_DRAM_SDQS6__MMDC_DRAM_SDQS_6           861
-MX6Q_PAD_DRAM_DQM6__MMDC_DRAM_DQM_6             862
-MX6Q_PAD_DRAM_D56__MMDC_DRAM_D_56               863
-MX6Q_PAD_DRAM_SDQS7__MMDC_DRAM_SDQS_7           864
-MX6Q_PAD_DRAM_D57__MMDC_DRAM_D_57               865
-MX6Q_PAD_DRAM_D58__MMDC_DRAM_D_58               866
-MX6Q_PAD_DRAM_D59__MMDC_DRAM_D_59               867
-MX6Q_PAD_DRAM_D60__MMDC_DRAM_D_60               868
-MX6Q_PAD_DRAM_DQM7__MMDC_DRAM_DQM_7             869
-MX6Q_PAD_DRAM_D61__MMDC_DRAM_D_61               870
-MX6Q_PAD_DRAM_D62__MMDC_DRAM_D_62               871
-MX6Q_PAD_DRAM_D63__MMDC_DRAM_D_63               872
-MX6Q_PAD_KEY_COL0__ECSPI1_SCLK                  873
-MX6Q_PAD_KEY_COL0__ENET_RDATA_3                 874
-MX6Q_PAD_KEY_COL0__AUDMUX_AUD5_TXC              875
-MX6Q_PAD_KEY_COL0__KPP_COL_0                    876
-MX6Q_PAD_KEY_COL0__UART4_TXD                    877
-MX6Q_PAD_KEY_COL0__GPIO_4_6                     878
-MX6Q_PAD_KEY_COL0__DCIC1_DCIC_OUT               879
-MX6Q_PAD_KEY_COL0__SRC_ANY_PU_RST               880
-MX6Q_PAD_KEY_ROW0__ECSPI1_MOSI                  881
-MX6Q_PAD_KEY_ROW0__ENET_TDATA_3                 882
-MX6Q_PAD_KEY_ROW0__AUDMUX_AUD5_TXD              883
-MX6Q_PAD_KEY_ROW0__KPP_ROW_0                    884
-MX6Q_PAD_KEY_ROW0__UART4_RXD                    885
-MX6Q_PAD_KEY_ROW0__GPIO_4_7                     886
-MX6Q_PAD_KEY_ROW0__DCIC2_DCIC_OUT               887
-MX6Q_PAD_KEY_ROW0__PL301_PER1_HADR_0            888
-MX6Q_PAD_KEY_COL1__ECSPI1_MISO                  889
-MX6Q_PAD_KEY_COL1__ENET_MDIO                    890
-MX6Q_PAD_KEY_COL1__AUDMUX_AUD5_TXFS             891
-MX6Q_PAD_KEY_COL1__KPP_COL_1                    892
-MX6Q_PAD_KEY_COL1__UART5_TXD                    893
-MX6Q_PAD_KEY_COL1__GPIO_4_8                     894
-MX6Q_PAD_KEY_COL1__USDHC1_VSELECT               895
-MX6Q_PAD_KEY_COL1__PL301MX_PER1_HADR_1          896
-MX6Q_PAD_KEY_ROW1__ECSPI1_SS0                   897
-MX6Q_PAD_KEY_ROW1__ENET_COL                     898
-MX6Q_PAD_KEY_ROW1__AUDMUX_AUD5_RXD              899
-MX6Q_PAD_KEY_ROW1__KPP_ROW_1                    900
-MX6Q_PAD_KEY_ROW1__UART5_RXD                    901
-MX6Q_PAD_KEY_ROW1__GPIO_4_9                     902
-MX6Q_PAD_KEY_ROW1__USDHC2_VSELECT               903
-MX6Q_PAD_KEY_ROW1__PL301_PER1_HADDR_2           904
-MX6Q_PAD_KEY_COL2__ECSPI1_SS1                   905
-MX6Q_PAD_KEY_COL2__ENET_RDATA_2                 906
-MX6Q_PAD_KEY_COL2__CAN1_TXCAN                   907
-MX6Q_PAD_KEY_COL2__KPP_COL_2                    908
-MX6Q_PAD_KEY_COL2__ENET_MDC                     909
-MX6Q_PAD_KEY_COL2__GPIO_4_10                    910
-MX6Q_PAD_KEY_COL2__USBOH3_H1_PWRCTL_WKP         911
-MX6Q_PAD_KEY_COL2__PL301_PER1_HADDR_3           912
-MX6Q_PAD_KEY_ROW2__ECSPI1_SS2                   913
-MX6Q_PAD_KEY_ROW2__ENET_TDATA_2                 914
-MX6Q_PAD_KEY_ROW2__CAN1_RXCAN                   915
-MX6Q_PAD_KEY_ROW2__KPP_ROW_2                    916
-MX6Q_PAD_KEY_ROW2__USDHC2_VSELECT               917
-MX6Q_PAD_KEY_ROW2__GPIO_4_11                    918
-MX6Q_PAD_KEY_ROW2__HDMI_TX_CEC_LINE             919
-MX6Q_PAD_KEY_ROW2__PL301_PER1_HADR_4            920
-MX6Q_PAD_KEY_COL3__ECSPI1_SS3                   921
-MX6Q_PAD_KEY_COL3__ENET_CRS                     922
-MX6Q_PAD_KEY_COL3__HDMI_TX_DDC_SCL              923
-MX6Q_PAD_KEY_COL3__KPP_COL_3                    924
-MX6Q_PAD_KEY_COL3__I2C2_SCL                     925
-MX6Q_PAD_KEY_COL3__GPIO_4_12                    926
-MX6Q_PAD_KEY_COL3__SPDIF_IN1                    927
-MX6Q_PAD_KEY_COL3__PL301_PER1_HADR_5            928
-MX6Q_PAD_KEY_ROW3__OSC32K_32K_OUT               929
-MX6Q_PAD_KEY_ROW3__ASRC_ASRC_EXT_CLK            930
-MX6Q_PAD_KEY_ROW3__HDMI_TX_DDC_SDA              931
-MX6Q_PAD_KEY_ROW3__KPP_ROW_3                    932
-MX6Q_PAD_KEY_ROW3__I2C2_SDA                     933
-MX6Q_PAD_KEY_ROW3__GPIO_4_13                    934
-MX6Q_PAD_KEY_ROW3__USDHC1_VSELECT               935
-MX6Q_PAD_KEY_ROW3__PL301_PER1_HADR_6            936
-MX6Q_PAD_KEY_COL4__CAN2_TXCAN                   937
-MX6Q_PAD_KEY_COL4__IPU1_SISG_4                  938
-MX6Q_PAD_KEY_COL4__USBOH3_USBOTG_OC             939
-MX6Q_PAD_KEY_COL4__KPP_COL_4                    940
-MX6Q_PAD_KEY_COL4__UART5_RTS                    941
-MX6Q_PAD_KEY_COL4__GPIO_4_14                    942
-MX6Q_PAD_KEY_COL4__MMDC_DEBUG_49                943
-MX6Q_PAD_KEY_COL4__PL301_PER1_HADDR_7           944
-MX6Q_PAD_KEY_ROW4__CAN2_RXCAN                   945
-MX6Q_PAD_KEY_ROW4__IPU1_SISG_5                  946
-MX6Q_PAD_KEY_ROW4__USBOH3_USBOTG_PWR            947
-MX6Q_PAD_KEY_ROW4__KPP_ROW_4                    948
-MX6Q_PAD_KEY_ROW4__UART5_CTS                    949
-MX6Q_PAD_KEY_ROW4__GPIO_4_15                    950
-MX6Q_PAD_KEY_ROW4__MMDC_DEBUG_50                951
-MX6Q_PAD_KEY_ROW4__PL301_PER1_HADR_8            952
-MX6Q_PAD_GPIO_0__CCM_CLKO                       953
-MX6Q_PAD_GPIO_0__KPP_COL_5                      954
-MX6Q_PAD_GPIO_0__ASRC_ASRC_EXT_CLK              955
-MX6Q_PAD_GPIO_0__EPIT1_EPITO                    956
-MX6Q_PAD_GPIO_0__GPIO_1_0                       957
-MX6Q_PAD_GPIO_0__USBOH3_USBH1_PWR               958
-MX6Q_PAD_GPIO_0__SNVS_HP_WRAP_SNVS_VIO5         959
-MX6Q_PAD_GPIO_1__ESAI1_SCKR                     960
-MX6Q_PAD_GPIO_1__WDOG2_WDOG_B                   961
-MX6Q_PAD_GPIO_1__KPP_ROW_5                      962
-MX6Q_PAD_GPIO_1__PWM2_PWMO                      963
-MX6Q_PAD_GPIO_1__GPIO_1_1                       964
-MX6Q_PAD_GPIO_1__USDHC1_CD                      965
-MX6Q_PAD_GPIO_1__SRC_TESTER_ACK                 966
-MX6Q_PAD_GPIO_9__ESAI1_FSR                      967
-MX6Q_PAD_GPIO_9__WDOG1_WDOG_B                   968
-MX6Q_PAD_GPIO_9__KPP_COL_6                      969
-MX6Q_PAD_GPIO_9__CCM_REF_EN_B                   970
-MX6Q_PAD_GPIO_9__PWM1_PWMO                      971
-MX6Q_PAD_GPIO_9__GPIO_1_9                       972
-MX6Q_PAD_GPIO_9__USDHC1_WP                      973
-MX6Q_PAD_GPIO_9__SRC_EARLY_RST                  974
-MX6Q_PAD_GPIO_3__ESAI1_HCKR                     975
-MX6Q_PAD_GPIO_3__OBSERVE_MUX_INT_OUT0           976
-MX6Q_PAD_GPIO_3__I2C3_SCL                       977
-MX6Q_PAD_GPIO_3__ANATOP_24M_OUT                 978
-MX6Q_PAD_GPIO_3__CCM_CLKO2                      979
-MX6Q_PAD_GPIO_3__GPIO_1_3                       980
-MX6Q_PAD_GPIO_3__USBOH3_USBH1_OC                981
-MX6Q_PAD_GPIO_3__MLB_MLBCLK                     982
-MX6Q_PAD_GPIO_6__ESAI1_SCKT                     983
-MX6Q_PAD_GPIO_6__OBSERVE_MUX_INT_OUT1           984
-MX6Q_PAD_GPIO_6__I2C3_SDA                       985
-MX6Q_PAD_GPIO_6__CCM_CCM_OUT_0                  986
-MX6Q_PAD_GPIO_6__CSU_CSU_INT_DEB                987
-MX6Q_PAD_GPIO_6__GPIO_1_6                       988
-MX6Q_PAD_GPIO_6__USDHC2_LCTL                    989
-MX6Q_PAD_GPIO_6__MLB_MLBSIG                     990
-MX6Q_PAD_GPIO_2__ESAI1_FST                      991
-MX6Q_PAD_GPIO_2__OBSERVE_MUX_INT_OUT2           992
-MX6Q_PAD_GPIO_2__KPP_ROW_6                      993
-MX6Q_PAD_GPIO_2__CCM_CCM_OUT_1                  994
-MX6Q_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0            995
-MX6Q_PAD_GPIO_2__GPIO_1_2                       996
-MX6Q_PAD_GPIO_2__USDHC2_WP                      997
-MX6Q_PAD_GPIO_2__MLB_MLBDAT                     998
-MX6Q_PAD_GPIO_4__ESAI1_HCKT                     999
-MX6Q_PAD_GPIO_4__OBSERVE_MUX_INT_OUT3           1000
-MX6Q_PAD_GPIO_4__KPP_COL_7                      1001
-MX6Q_PAD_GPIO_4__CCM_CCM_OUT_2                  1002
-MX6Q_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1            1003
-MX6Q_PAD_GPIO_4__GPIO_1_4                       1004
-MX6Q_PAD_GPIO_4__USDHC2_CD                      1005
-MX6Q_PAD_GPIO_4__OCOTP_CRL_WRAR_FUSE_LA         1006
-MX6Q_PAD_GPIO_5__ESAI1_TX2_RX3                  1007
-MX6Q_PAD_GPIO_5__OBSERVE_MUX_INT_OUT4           1008
-MX6Q_PAD_GPIO_5__KPP_ROW_7                      1009
-MX6Q_PAD_GPIO_5__CCM_CLKO                       1010
-MX6Q_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2            1011
-MX6Q_PAD_GPIO_5__GPIO_1_5                       1012
-MX6Q_PAD_GPIO_5__I2C3_SCL                       1013
-MX6Q_PAD_GPIO_5__CHEETAH_EVENTI                 1014
-MX6Q_PAD_GPIO_7__ESAI1_TX4_RX1                  1015
-MX6Q_PAD_GPIO_7__ECSPI5_RDY                     1016
-MX6Q_PAD_GPIO_7__EPIT1_EPITO                    1017
-MX6Q_PAD_GPIO_7__CAN1_TXCAN                     1018
-MX6Q_PAD_GPIO_7__UART2_TXD                      1019
-MX6Q_PAD_GPIO_7__GPIO_1_7                       1020
-MX6Q_PAD_GPIO_7__SPDIF_PLOCK                    1021
-MX6Q_PAD_GPIO_7__USBOH3_OTGUSB_HST_MODE         1022
-MX6Q_PAD_GPIO_8__ESAI1_TX5_RX0                  1023
-MX6Q_PAD_GPIO_8__ANATOP_ANATOP_32K_OUT          1024
-MX6Q_PAD_GPIO_8__EPIT2_EPITO                    1025
-MX6Q_PAD_GPIO_8__CAN1_RXCAN                     1026
-MX6Q_PAD_GPIO_8__UART2_RXD                      1027
-MX6Q_PAD_GPIO_8__GPIO_1_8                       1028
-MX6Q_PAD_GPIO_8__SPDIF_SRCLK                    1029
-MX6Q_PAD_GPIO_8__USBOH3_OTG_PWRCTL_WAK          1030
-MX6Q_PAD_GPIO_16__ESAI1_TX3_RX2                 1031
-MX6Q_PAD_GPIO_16__ENET_1588_EVENT2_IN           1032
-MX6Q_PAD_GPIO_16__ENET_ETHERNET_REF_OUT         1033
-MX6Q_PAD_GPIO_16__USDHC1_LCTL                   1034
-MX6Q_PAD_GPIO_16__SPDIF_IN1                     1035
-MX6Q_PAD_GPIO_16__GPIO_7_11                     1036
-MX6Q_PAD_GPIO_16__I2C3_SDA                      1037
-MX6Q_PAD_GPIO_16__SJC_DE_B                      1038
-MX6Q_PAD_GPIO_17__ESAI1_TX0                     1039
-MX6Q_PAD_GPIO_17__ENET_1588_EVENT3_IN           1040
-MX6Q_PAD_GPIO_17__CCM_PMIC_RDY                  1041
-MX6Q_PAD_GPIO_17__SDMA_SDMA_EXT_EVENT_0         1042
-MX6Q_PAD_GPIO_17__SPDIF_OUT1                    1043
-MX6Q_PAD_GPIO_17__GPIO_7_12                     1044
-MX6Q_PAD_GPIO_17__SJC_JTAG_ACT                  1045
-MX6Q_PAD_GPIO_18__ESAI1_TX1                     1046
-MX6Q_PAD_GPIO_18__ENET_RX_CLK                   1047
-MX6Q_PAD_GPIO_18__USDHC3_VSELECT                1048
-MX6Q_PAD_GPIO_18__SDMA_SDMA_EXT_EVENT_1         1049
-MX6Q_PAD_GPIO_18__ASRC_ASRC_EXT_CLK             1050
-MX6Q_PAD_GPIO_18__GPIO_7_13                     1051
-MX6Q_PAD_GPIO_18__SNVS_HP_WRA_SNVS_VIO5         1052
-MX6Q_PAD_GPIO_18__SRC_SYSTEM_RST                1053
-MX6Q_PAD_GPIO_19__KPP_COL_5                     1054
-MX6Q_PAD_GPIO_19__ENET_1588_EVENT0_OUT          1055
-MX6Q_PAD_GPIO_19__SPDIF_OUT1                    1056
-MX6Q_PAD_GPIO_19__CCM_CLKO                      1057
-MX6Q_PAD_GPIO_19__ECSPI1_RDY                    1058
-MX6Q_PAD_GPIO_19__GPIO_4_5                      1059
-MX6Q_PAD_GPIO_19__ENET_TX_ER                    1060
-MX6Q_PAD_GPIO_19__SRC_INT_BOOT                  1061
-MX6Q_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK          1062
-MX6Q_PAD_CSI0_PIXCLK__PCIE_CTRL_MUX_12          1063
-MX6Q_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0           1064
-MX6Q_PAD_CSI0_PIXCLK__GPIO_5_18                 1065
-MX6Q_PAD_CSI0_PIXCLK___MMDC_DEBUG_29            1066
-MX6Q_PAD_CSI0_PIXCLK__CHEETAH_EVENTO            1067
-MX6Q_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC             1068
-MX6Q_PAD_CSI0_MCLK__PCIE_CTRL_MUX_13            1069
-MX6Q_PAD_CSI0_MCLK__CCM_CLKO                    1070
-MX6Q_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1             1071
-MX6Q_PAD_CSI0_MCLK__GPIO_5_19                   1072
-MX6Q_PAD_CSI0_MCLK__MMDC_MMDC_DEBUG_30          1073
-MX6Q_PAD_CSI0_MCLK__CHEETAH_TRCTL               1074
-MX6Q_PAD_CSI0_DATA_EN__IPU1_CSI0_DA_EN          1075
-MX6Q_PAD_CSI0_DATA_EN__WEIM_WEIM_D_0            1076
-MX6Q_PAD_CSI0_DATA_EN__PCIE_CTRL_MUX_14         1077
-MX6Q_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2          1078
-MX6Q_PAD_CSI0_DATA_EN__GPIO_5_20                1079
-MX6Q_PAD_CSI0_DATA_EN__MMDC_DEBUG_31            1080
-MX6Q_PAD_CSI0_DATA_EN__CHEETAH_TRCLK            1081
-MX6Q_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC            1082
-MX6Q_PAD_CSI0_VSYNC__WEIM_WEIM_D_1              1083
-MX6Q_PAD_CSI0_VSYNC__PCIE_CTRL_MUX_15           1084
-MX6Q_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3            1085
-MX6Q_PAD_CSI0_VSYNC__GPIO_5_21                  1086
-MX6Q_PAD_CSI0_VSYNC__MMDC_DEBUG_32              1087
-MX6Q_PAD_CSI0_VSYNC__CHEETAH_TRACE_0            1088
-MX6Q_PAD_CSI0_DAT4__IPU1_CSI0_D_4               1089
-MX6Q_PAD_CSI0_DAT4__WEIM_WEIM_D_2               1090
-MX6Q_PAD_CSI0_DAT4__ECSPI1_SCLK                 1091
-MX6Q_PAD_CSI0_DAT4__KPP_COL_5                   1092
-MX6Q_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC             1093
-MX6Q_PAD_CSI0_DAT4__GPIO_5_22                   1094
-MX6Q_PAD_CSI0_DAT4__MMDC_DEBUG_43               1095
-MX6Q_PAD_CSI0_DAT4__CHEETAH_TRACE_1             1096
-MX6Q_PAD_CSI0_DAT5__IPU1_CSI0_D_5               1097
-MX6Q_PAD_CSI0_DAT5__WEIM_WEIM_D_3               1098
-MX6Q_PAD_CSI0_DAT5__ECSPI1_MOSI                 1099
-MX6Q_PAD_CSI0_DAT5__KPP_ROW_5                   1100
-MX6Q_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD             1101
-MX6Q_PAD_CSI0_DAT5__GPIO_5_23                   1102
-MX6Q_PAD_CSI0_DAT5__MMDC_MMDC_DEBUG_44          1103
-MX6Q_PAD_CSI0_DAT5__CHEETAH_TRACE_2             1104
-MX6Q_PAD_CSI0_DAT6__IPU1_CSI0_D_6               1105
-MX6Q_PAD_CSI0_DAT6__WEIM_WEIM_D_4               1106
-MX6Q_PAD_CSI0_DAT6__ECSPI1_MISO                 1107
-MX6Q_PAD_CSI0_DAT6__KPP_COL_6                   1108
-MX6Q_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS            1109
-MX6Q_PAD_CSI0_DAT6__GPIO_5_24                   1110
-MX6Q_PAD_CSI0_DAT6__MMDC_MMDC_DEBUG_45          1111
-MX6Q_PAD_CSI0_DAT6__CHEETAH_TRACE_3             1112
-MX6Q_PAD_CSI0_DAT7__IPU1_CSI0_D_7               1113
-MX6Q_PAD_CSI0_DAT7__WEIM_WEIM_D_5               1114
-MX6Q_PAD_CSI0_DAT7__ECSPI1_SS0                  1115
-MX6Q_PAD_CSI0_DAT7__KPP_ROW_6                   1116
-MX6Q_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD             1117
-MX6Q_PAD_CSI0_DAT7__GPIO_5_25                   1118
-MX6Q_PAD_CSI0_DAT7__MMDC_MMDC_DEBUG_46          1119
-MX6Q_PAD_CSI0_DAT7__CHEETAH_TRACE_4             1120
-MX6Q_PAD_CSI0_DAT8__IPU1_CSI0_D_8               1121
-MX6Q_PAD_CSI0_DAT8__WEIM_WEIM_D_6               1122
-MX6Q_PAD_CSI0_DAT8__ECSPI2_SCLK                 1123
-MX6Q_PAD_CSI0_DAT8__KPP_COL_7                   1124
-MX6Q_PAD_CSI0_DAT8__I2C1_SDA                    1125
-MX6Q_PAD_CSI0_DAT8__GPIO_5_26                   1126
-MX6Q_PAD_CSI0_DAT8__MMDC_MMDC_DEBUG_47          1127
-MX6Q_PAD_CSI0_DAT8__CHEETAH_TRACE_5             1128
-MX6Q_PAD_CSI0_DAT9__IPU1_CSI0_D_9               1129
-MX6Q_PAD_CSI0_DAT9__WEIM_WEIM_D_7               1130
-MX6Q_PAD_CSI0_DAT9__ECSPI2_MOSI                 1131
-MX6Q_PAD_CSI0_DAT9__KPP_ROW_7                   1132
-MX6Q_PAD_CSI0_DAT9__I2C1_SCL                    1133
-MX6Q_PAD_CSI0_DAT9__GPIO_5_27                   1134
-MX6Q_PAD_CSI0_DAT9__MMDC_MMDC_DEBUG_48          1135
-MX6Q_PAD_CSI0_DAT9__CHEETAH_TRACE_6             1136
-MX6Q_PAD_CSI0_DAT10__IPU1_CSI0_D_10             1137
-MX6Q_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC            1138
-MX6Q_PAD_CSI0_DAT10__ECSPI2_MISO                1139
-MX6Q_PAD_CSI0_DAT10__UART1_TXD                  1140
-MX6Q_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4            1141
-MX6Q_PAD_CSI0_DAT10__GPIO_5_28                  1142
-MX6Q_PAD_CSI0_DAT10__MMDC_MMDC_DEBUG_33         1143
-MX6Q_PAD_CSI0_DAT10__CHEETAH_TRACE_7            1144
-MX6Q_PAD_CSI0_DAT11__IPU1_CSI0_D_11             1145
-MX6Q_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS           1146
-MX6Q_PAD_CSI0_DAT11__ECSPI2_SS0                 1147
-MX6Q_PAD_CSI0_DAT11__UART1_RXD                  1148
-MX6Q_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5            1149
-MX6Q_PAD_CSI0_DAT11__GPIO_5_29                  1150
-MX6Q_PAD_CSI0_DAT11__MMDC_MMDC_DEBUG_34         1151
-MX6Q_PAD_CSI0_DAT11__CHEETAH_TRACE_8            1152
-MX6Q_PAD_CSI0_DAT12__IPU1_CSI0_D_12             1153
-MX6Q_PAD_CSI0_DAT12__WEIM_WEIM_D_8              1154
-MX6Q_PAD_CSI0_DAT12__PCIE_CTRL_MUX_16           1155
-MX6Q_PAD_CSI0_DAT12__UART4_TXD                  1156
-MX6Q_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6            1157
-MX6Q_PAD_CSI0_DAT12__GPIO_5_30                  1158
-MX6Q_PAD_CSI0_DAT12__MMDC_MMDC_DEBUG_35         1159
-MX6Q_PAD_CSI0_DAT12__CHEETAH_TRACE_9            1160
-MX6Q_PAD_CSI0_DAT13__IPU1_CSI0_D_13             1161
-MX6Q_PAD_CSI0_DAT13__WEIM_WEIM_D_9              1162
-MX6Q_PAD_CSI0_DAT13__PCIE_CTRL_MUX_17           1163
-MX6Q_PAD_CSI0_DAT13__UART4_RXD                  1164
-MX6Q_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7            1165
-MX6Q_PAD_CSI0_DAT13__GPIO_5_31                  1166
-MX6Q_PAD_CSI0_DAT13__MMDC_MMDC_DEBUG_36         1167
-MX6Q_PAD_CSI0_DAT13__CHEETAH_TRACE_10           1168
-MX6Q_PAD_CSI0_DAT14__IPU1_CSI0_D_14             1169
-MX6Q_PAD_CSI0_DAT14__WEIM_WEIM_D_10             1170
-MX6Q_PAD_CSI0_DAT14__PCIE_CTRL_MUX_18           1171
-MX6Q_PAD_CSI0_DAT14__UART5_TXD                  1172
-MX6Q_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8            1173
-MX6Q_PAD_CSI0_DAT14__GPIO_6_0                   1174
-MX6Q_PAD_CSI0_DAT14__MMDC_MMDC_DEBUG_37         1175
-MX6Q_PAD_CSI0_DAT14__CHEETAH_TRACE_11           1176
-MX6Q_PAD_CSI0_DAT15__IPU1_CSI0_D_15             1177
-MX6Q_PAD_CSI0_DAT15__WEIM_WEIM_D_11             1178
-MX6Q_PAD_CSI0_DAT15__PCIE_CTRL_MUX_19           1179
-MX6Q_PAD_CSI0_DAT15__UART5_RXD                  1180
-MX6Q_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9            1181
-MX6Q_PAD_CSI0_DAT15__GPIO_6_1                   1182
-MX6Q_PAD_CSI0_DAT15__MMDC_MMDC_DEBUG_38         1183
-MX6Q_PAD_CSI0_DAT15__CHEETAH_TRACE_12           1184
-MX6Q_PAD_CSI0_DAT16__IPU1_CSI0_D_16             1185
-MX6Q_PAD_CSI0_DAT16__WEIM_WEIM_D_12             1186
-MX6Q_PAD_CSI0_DAT16__PCIE_CTRL_MUX_20           1187
-MX6Q_PAD_CSI0_DAT16__UART4_RTS                  1188
-MX6Q_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10           1189
-MX6Q_PAD_CSI0_DAT16__GPIO_6_2                   1190
-MX6Q_PAD_CSI0_DAT16__MMDC_MMDC_DEBUG_39         1191
-MX6Q_PAD_CSI0_DAT16__CHEETAH_TRACE_13           1192
-MX6Q_PAD_CSI0_DAT17__IPU1_CSI0_D_17             1193
-MX6Q_PAD_CSI0_DAT17__WEIM_WEIM_D_13             1194
-MX6Q_PAD_CSI0_DAT17__PCIE_CTRL_MUX_21           1195
-MX6Q_PAD_CSI0_DAT17__UART4_CTS                  1196
-MX6Q_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11           1197
-MX6Q_PAD_CSI0_DAT17__GPIO_6_3                   1198
-MX6Q_PAD_CSI0_DAT17__MMDC_MMDC_DEBUG_40         1199
-MX6Q_PAD_CSI0_DAT17__CHEETAH_TRACE_14           1200
-MX6Q_PAD_CSI0_DAT18__IPU1_CSI0_D_18             1201
-MX6Q_PAD_CSI0_DAT18__WEIM_WEIM_D_14             1202
-MX6Q_PAD_CSI0_DAT18__PCIE_CTRL_MUX_22           1203
-MX6Q_PAD_CSI0_DAT18__UART5_RTS                  1204
-MX6Q_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12           1205
-MX6Q_PAD_CSI0_DAT18__GPIO_6_4                   1206
-MX6Q_PAD_CSI0_DAT18__MMDC_MMDC_DEBUG_41         1207
-MX6Q_PAD_CSI0_DAT18__CHEETAH_TRACE_15           1208
-MX6Q_PAD_CSI0_DAT19__IPU1_CSI0_D_19             1209
-MX6Q_PAD_CSI0_DAT19__WEIM_WEIM_D_15             1210
-MX6Q_PAD_CSI0_DAT19__PCIE_CTRL_MUX_23           1211
-MX6Q_PAD_CSI0_DAT19__UART5_CTS                  1212
-MX6Q_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13           1213
-MX6Q_PAD_CSI0_DAT19__GPIO_6_5                   1214
-MX6Q_PAD_CSI0_DAT19__MMDC_MMDC_DEBUG_42         1215
-MX6Q_PAD_CSI0_DAT19__ANATOP_TESTO_9             1216
-MX6Q_PAD_JTAG_TMS__SJC_TMS                      1217
-MX6Q_PAD_JTAG_MOD__SJC_MOD                      1218
-MX6Q_PAD_JTAG_TRSTB__SJC_TRSTB                  1219
-MX6Q_PAD_JTAG_TDI__SJC_TDI                      1220
-MX6Q_PAD_JTAG_TCK__SJC_TCK                      1221
-MX6Q_PAD_JTAG_TDO__SJC_TDO                      1222
-MX6Q_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3             1223
-MX6Q_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2             1224
-MX6Q_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK             1225
-MX6Q_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1             1226
-MX6Q_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0             1227
-MX6Q_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3             1228
-MX6Q_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK             1229
-MX6Q_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2             1230
-MX6Q_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1             1231
-MX6Q_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0             1232
-MX6Q_PAD_TAMPER__SNVS_LP_WRAP_SNVS_TD1          1233
-MX6Q_PAD_PMIC_ON_REQ__SNVS_LPWRAP_WKALM         1234
-MX6Q_PAD_PMIC_STBY_REQ__CCM_PMIC_STBYRQ         1235
-MX6Q_PAD_POR_B__SRC_POR_B                       1236
-MX6Q_PAD_BOOT_MODE1__SRC_BOOT_MODE_1            1237
-MX6Q_PAD_RESET_IN_B__SRC_RESET_B                1238
-MX6Q_PAD_BOOT_MODE0__SRC_BOOT_MODE_0            1239
-MX6Q_PAD_TEST_MODE__TCU_TEST_MODE               1240
-MX6Q_PAD_SD3_DAT7__USDHC3_DAT7                  1241
-MX6Q_PAD_SD3_DAT7__UART1_TXD                    1242
-MX6Q_PAD_SD3_DAT7__PCIE_CTRL_MUX_24             1243
-MX6Q_PAD_SD3_DAT7__USBOH3_UH3_DFD_OUT_0         1244
-MX6Q_PAD_SD3_DAT7__USBOH3_UH2_DFD_OUT_0         1245
-MX6Q_PAD_SD3_DAT7__GPIO_6_17                    1246
-MX6Q_PAD_SD3_DAT7__MIPI_CORE_DPHY_IN_12         1247
-MX6Q_PAD_SD3_DAT7__USBPHY2_CLK20DIV             1248
-MX6Q_PAD_SD3_DAT6__USDHC3_DAT6                  1249
-MX6Q_PAD_SD3_DAT6__UART1_RXD                    1250
-MX6Q_PAD_SD3_DAT6__PCIE_CTRL_MUX_25             1251
-MX6Q_PAD_SD3_DAT6__USBOH3_UH3_DFD_OUT_1         1252
-MX6Q_PAD_SD3_DAT6__USBOH3_UH2_DFD_OUT_1         1253
-MX6Q_PAD_SD3_DAT6__GPIO_6_18                    1254
-MX6Q_PAD_SD3_DAT6__MIPI_CORE_DPHY_IN_13         1255
-MX6Q_PAD_SD3_DAT6__ANATOP_TESTO_10              1256
-MX6Q_PAD_SD3_DAT5__USDHC3_DAT5                  1257
-MX6Q_PAD_SD3_DAT5__UART2_TXD                    1258
-MX6Q_PAD_SD3_DAT5__PCIE_CTRL_MUX_26             1259
-MX6Q_PAD_SD3_DAT5__USBOH3_UH3_DFD_OUT_2         1260
-MX6Q_PAD_SD3_DAT5__USBOH3_UH2_DFD_OUT_2         1261
-MX6Q_PAD_SD3_DAT5__GPIO_7_0                     1262
-MX6Q_PAD_SD3_DAT5__MIPI_CORE_DPHY_IN_14         1263
-MX6Q_PAD_SD3_DAT5__ANATOP_TESTO_11              1264
-MX6Q_PAD_SD3_DAT4__USDHC3_DAT4                  1265
-MX6Q_PAD_SD3_DAT4__UART2_RXD                    1266
-MX6Q_PAD_SD3_DAT4__PCIE_CTRL_MUX_27             1267
-MX6Q_PAD_SD3_DAT4__USBOH3_UH3_DFD_OUT_3         1268
-MX6Q_PAD_SD3_DAT4__USBOH3_UH2_DFD_OUT_3         1269
-MX6Q_PAD_SD3_DAT4__GPIO_7_1                     1270
-MX6Q_PAD_SD3_DAT4__MIPI_CORE_DPHY_IN_15         1271
-MX6Q_PAD_SD3_DAT4__ANATOP_TESTO_12              1272
-MX6Q_PAD_SD3_CMD__USDHC3_CMD                    1273
-MX6Q_PAD_SD3_CMD__UART2_CTS                     1274
-MX6Q_PAD_SD3_CMD__CAN1_TXCAN                    1275
-MX6Q_PAD_SD3_CMD__USBOH3_UH3_DFD_OUT_4          1276
-MX6Q_PAD_SD3_CMD__USBOH3_UH2_DFD_OUT_4          1277
-MX6Q_PAD_SD3_CMD__GPIO_7_2                      1278
-MX6Q_PAD_SD3_CMD__MIPI_CORE_DPHY_IN_16          1279
-MX6Q_PAD_SD3_CMD__ANATOP_TESTO_13               1280
-MX6Q_PAD_SD3_CLK__USDHC3_CLK                    1281
-MX6Q_PAD_SD3_CLK__UART2_RTS                     1282
-MX6Q_PAD_SD3_CLK__CAN1_RXCAN                    1283
-MX6Q_PAD_SD3_CLK__USBOH3_UH3_DFD_OUT_5          1284
-MX6Q_PAD_SD3_CLK__USBOH3_UH2_DFD_OUT_5          1285
-MX6Q_PAD_SD3_CLK__GPIO_7_3                      1286
-MX6Q_PAD_SD3_CLK__MIPI_CORE_DPHY_IN_17          1287
-MX6Q_PAD_SD3_CLK__ANATOP_TESTO_14               1288
-MX6Q_PAD_SD3_DAT0__USDHC3_DAT0                  1289
-MX6Q_PAD_SD3_DAT0__UART1_CTS                    1290
-MX6Q_PAD_SD3_DAT0__CAN2_TXCAN                   1291
-MX6Q_PAD_SD3_DAT0__USBOH3_UH3_DFD_OUT_6         1292
-MX6Q_PAD_SD3_DAT0__USBOH3_UH2_DFD_OUT_6         1293
-MX6Q_PAD_SD3_DAT0__GPIO_7_4                     1294
-MX6Q_PAD_SD3_DAT0__MIPI_CORE_DPHY_IN_18         1295
-MX6Q_PAD_SD3_DAT0__ANATOP_TESTO_15              1296
-MX6Q_PAD_SD3_DAT1__USDHC3_DAT1                  1297
-MX6Q_PAD_SD3_DAT1__UART1_RTS                    1298
-MX6Q_PAD_SD3_DAT1__CAN2_RXCAN                   1299
-MX6Q_PAD_SD3_DAT1__USBOH3_UH3_DFD_OUT_7         1300
-MX6Q_PAD_SD3_DAT1__USBOH3_UH2_DFD_OUT_7         1301
-MX6Q_PAD_SD3_DAT1__GPIO_7_5                     1302
-MX6Q_PAD_SD3_DAT1__MIPI_CORE_DPHY_IN_19         1303
-MX6Q_PAD_SD3_DAT1__ANATOP_TESTI_0               1304
-MX6Q_PAD_SD3_DAT2__USDHC3_DAT2                  1305
-MX6Q_PAD_SD3_DAT2__PCIE_CTRL_MUX_28             1306
-MX6Q_PAD_SD3_DAT2__USBOH3_UH3_DFD_OUT_8         1307
-MX6Q_PAD_SD3_DAT2__USBOH3_UH2_DFD_OUT_8         1308
-MX6Q_PAD_SD3_DAT2__GPIO_7_6                     1309
-MX6Q_PAD_SD3_DAT2__MIPI_CORE_DPHY_IN_20         1310
-MX6Q_PAD_SD3_DAT2__ANATOP_TESTI_1               1311
-MX6Q_PAD_SD3_DAT3__USDHC3_DAT3                  1312
-MX6Q_PAD_SD3_DAT3__UART3_CTS                    1313
-MX6Q_PAD_SD3_DAT3__PCIE_CTRL_MUX_29             1314
-MX6Q_PAD_SD3_DAT3__USBOH3_UH3_DFD_OUT_9         1315
-MX6Q_PAD_SD3_DAT3__USBOH3_UH2_DFD_OUT_9         1316
-MX6Q_PAD_SD3_DAT3__GPIO_7_7                     1317
-MX6Q_PAD_SD3_DAT3__MIPI_CORE_DPHY_IN_21         1318
-MX6Q_PAD_SD3_DAT3__ANATOP_TESTI_2               1319
-MX6Q_PAD_SD3_RST__USDHC3_RST                    1320
-MX6Q_PAD_SD3_RST__UART3_RTS                     1321
-MX6Q_PAD_SD3_RST__PCIE_CTRL_MUX_30              1322
-MX6Q_PAD_SD3_RST__USBOH3_UH3_DFD_OUT_10         1323
-MX6Q_PAD_SD3_RST__USBOH3_UH2_DFD_OUT_10         1324
-MX6Q_PAD_SD3_RST__GPIO_7_8                      1325
-MX6Q_PAD_SD3_RST__MIPI_CORE_DPHY_IN_22          1326
-MX6Q_PAD_SD3_RST__ANATOP_ANATOP_TESTI_3         1327
-MX6Q_PAD_NANDF_CLE__RAWNAND_CLE                 1328
-MX6Q_PAD_NANDF_CLE__IPU2_SISG_4                 1329
-MX6Q_PAD_NANDF_CLE__PCIE_CTRL_MUX_31            1330
-MX6Q_PAD_NANDF_CLE__USBOH3_UH3_DFD_OT11         1331
-MX6Q_PAD_NANDF_CLE__USBOH3_UH2_DFD_OT11         1332
-MX6Q_PAD_NANDF_CLE__GPIO_6_7                    1333
-MX6Q_PAD_NANDF_CLE__MIPI_CORE_DPHY_IN23         1334
-MX6Q_PAD_NANDF_CLE__TPSMP_HTRANS_0              1335
-MX6Q_PAD_NANDF_ALE__RAWNAND_ALE                 1336
-MX6Q_PAD_NANDF_ALE__USDHC4_RST                  1337
-MX6Q_PAD_NANDF_ALE__PCIE_CTRL_MUX_0             1338
-MX6Q_PAD_NANDF_ALE__USBOH3_UH3_DFD_OT12         1339
-MX6Q_PAD_NANDF_ALE__USBOH3_UH2_DFD_OT12         1340
-MX6Q_PAD_NANDF_ALE__GPIO_6_8                    1341
-MX6Q_PAD_NANDF_ALE__MIPI_CR_DPHY_IN_24          1342
-MX6Q_PAD_NANDF_ALE__TPSMP_HTRANS_1              1343
-MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN             1344
-MX6Q_PAD_NANDF_WP_B__IPU2_SISG_5                1345
-MX6Q_PAD_NANDF_WP_B__PCIE_CTRL__MUX_1           1346
-MX6Q_PAD_NANDF_WP_B__USBOH3_UH3_DFDOT13         1347
-MX6Q_PAD_NANDF_WP_B__USBOH3_UH2_DFDOT13         1348
-MX6Q_PAD_NANDF_WP_B__GPIO_6_9                   1349
-MX6Q_PAD_NANDF_WP_B__MIPI_CR_DPHY_OUT32         1350
-MX6Q_PAD_NANDF_WP_B__PL301_PER1_HSIZE_0         1351
-MX6Q_PAD_NANDF_RB0__RAWNAND_READY0              1352
-MX6Q_PAD_NANDF_RB0__IPU2_DI0_PIN1               1353
-MX6Q_PAD_NANDF_RB0__PCIE_CTRL_MUX_2             1354
-MX6Q_PAD_NANDF_RB0__USBOH3_UH3_DFD_OT14         1355
-MX6Q_PAD_NANDF_RB0__USBOH3_UH2_DFD_OT14         1356
-MX6Q_PAD_NANDF_RB0__GPIO_6_10                   1357
-MX6Q_PAD_NANDF_RB0__MIPI_CR_DPHY_OUT_33         1358
-MX6Q_PAD_NANDF_RB0__PL301_PER1_HSIZE_1          1359
-MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N                1360
-MX6Q_PAD_NANDF_CS0__USBOH3_UH3_DFD_OT15         1361
-MX6Q_PAD_NANDF_CS0__USBOH3_UH2_DFD_OT15         1362
-MX6Q_PAD_NANDF_CS0__GPIO_6_11                   1363
-MX6Q_PAD_NANDF_CS0__PL301_PER1_HSIZE_2          1364
-MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N                1365
-MX6Q_PAD_NANDF_CS1__USDHC4_VSELECT              1366
-MX6Q_PAD_NANDF_CS1__USDHC3_VSELECT              1367
-MX6Q_PAD_NANDF_CS1__PCIE_CTRL_MUX_3             1368
-MX6Q_PAD_NANDF_CS1__GPIO_6_14                   1369
-MX6Q_PAD_NANDF_CS1__PL301_PER1_HRDYOUT          1370
-MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N                1371
-MX6Q_PAD_NANDF_CS2__IPU1_SISG_0                 1372
-MX6Q_PAD_NANDF_CS2__ESAI1_TX0                   1373
-MX6Q_PAD_NANDF_CS2__WEIM_WEIM_CRE               1374
-MX6Q_PAD_NANDF_CS2__CCM_CLKO2                   1375
-MX6Q_PAD_NANDF_CS2__GPIO_6_15                   1376
-MX6Q_PAD_NANDF_CS2__IPU2_SISG_0                 1377
-MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N                1378
-MX6Q_PAD_NANDF_CS3__IPU1_SISG_1                 1379
-MX6Q_PAD_NANDF_CS3__ESAI1_TX1                   1380
-MX6Q_PAD_NANDF_CS3__WEIM_WEIM_A_26              1381
-MX6Q_PAD_NANDF_CS3__PCIE_CTRL_MUX_4             1382
-MX6Q_PAD_NANDF_CS3__GPIO_6_16                   1383
-MX6Q_PAD_NANDF_CS3__IPU2_SISG_1                 1384
-MX6Q_PAD_NANDF_CS3__TPSMP_CLK                   1385
-MX6Q_PAD_SD4_CMD__USDHC4_CMD                    1386
-MX6Q_PAD_SD4_CMD__RAWNAND_RDN                   1387
-MX6Q_PAD_SD4_CMD__UART3_TXD                     1388
-MX6Q_PAD_SD4_CMD__PCIE_CTRL_MUX_5               1389
-MX6Q_PAD_SD4_CMD__GPIO_7_9                      1390
-MX6Q_PAD_SD4_CMD__TPSMP_HDATA_DIR               1391
-MX6Q_PAD_SD4_CLK__USDHC4_CLK                    1392
-MX6Q_PAD_SD4_CLK__RAWNAND_WRN                   1393
-MX6Q_PAD_SD4_CLK__UART3_RXD                     1394
-MX6Q_PAD_SD4_CLK__PCIE_CTRL_MUX_6               1395
-MX6Q_PAD_SD4_CLK__GPIO_7_10                     1396
-MX6Q_PAD_NANDF_D0__RAWNAND_D0                   1397
-MX6Q_PAD_NANDF_D0__USDHC1_DAT4                  1398
-MX6Q_PAD_NANDF_D0__GPU3D_GPU_DBG_OUT_0          1399
-MX6Q_PAD_NANDF_D0__USBOH3_UH2_DFD_OUT16         1400
-MX6Q_PAD_NANDF_D0__USBOH3_UH3_DFD_OUT16         1401
-MX6Q_PAD_NANDF_D0__GPIO_2_0                     1402
-MX6Q_PAD_NANDF_D0__IPU1_IPU_DIAG_BUS_0          1403
-MX6Q_PAD_NANDF_D0__IPU2_IPU_DIAG_BUS_0          1404
-MX6Q_PAD_NANDF_D1__RAWNAND_D1                   1405
-MX6Q_PAD_NANDF_D1__USDHC1_DAT5                  1406
-MX6Q_PAD_NANDF_D1__GPU3D_GPU_DEBUG_OUT1         1407
-MX6Q_PAD_NANDF_D1__USBOH3_UH2_DFD_OUT17         1408
-MX6Q_PAD_NANDF_D1__USBOH3_UH3_DFD_OUT17         1409
-MX6Q_PAD_NANDF_D1__GPIO_2_1                     1410
-MX6Q_PAD_NANDF_D1__IPU1_IPU_DIAG_BUS_1          1411
-MX6Q_PAD_NANDF_D1__IPU2_IPU_DIAG_BUS_1          1412
-MX6Q_PAD_NANDF_D2__RAWNAND_D2                   1413
-MX6Q_PAD_NANDF_D2__USDHC1_DAT6                  1414
-MX6Q_PAD_NANDF_D2__GPU3D_GPU_DBG_OUT_2          1415
-MX6Q_PAD_NANDF_D2__USBOH3_UH2_DFD_OUT18         1416
-MX6Q_PAD_NANDF_D2__USBOH3_UH3_DFD_OUT18         1417
-MX6Q_PAD_NANDF_D2__GPIO_2_2                     1418
-MX6Q_PAD_NANDF_D2__IPU1_IPU_DIAG_BUS_2          1419
-MX6Q_PAD_NANDF_D2__IPU2_IPU_DIAG_BUS_2          1420
-MX6Q_PAD_NANDF_D3__RAWNAND_D3                   1421
-MX6Q_PAD_NANDF_D3__USDHC1_DAT7                  1422
-MX6Q_PAD_NANDF_D3__GPU3D_GPU_DBG_OUT_3          1423
-MX6Q_PAD_NANDF_D3__USBOH3_UH2_DFD_OUT19         1424
-MX6Q_PAD_NANDF_D3__USBOH3_UH3_DFD_OUT19         1425
-MX6Q_PAD_NANDF_D3__GPIO_2_3                     1426
-MX6Q_PAD_NANDF_D3__IPU1_IPU_DIAG_BUS_3          1427
-MX6Q_PAD_NANDF_D3__IPU2_IPU_DIAG_BUS_3          1428
-MX6Q_PAD_NANDF_D4__RAWNAND_D4                   1429
-MX6Q_PAD_NANDF_D4__USDHC2_DAT4                  1430
-MX6Q_PAD_NANDF_D4__GPU3D_GPU_DBG_OUT_4          1431
-MX6Q_PAD_NANDF_D4__USBOH3_UH2_DFD_OUT20         1432
-MX6Q_PAD_NANDF_D4__USBOH3_UH3_DFD_OUT20         1433
-MX6Q_PAD_NANDF_D4__GPIO_2_4                     1434
-MX6Q_PAD_NANDF_D4__IPU1_IPU_DIAG_BUS_4          1435
-MX6Q_PAD_NANDF_D4__IPU2_IPU_DIAG_BUS_4          1436
-MX6Q_PAD_NANDF_D5__RAWNAND_D5                   1437
-MX6Q_PAD_NANDF_D5__USDHC2_DAT5                  1438
-MX6Q_PAD_NANDF_D5__GPU3D_GPU_DBG_OUT_5          1439
-MX6Q_PAD_NANDF_D5__USBOH3_UH2_DFD_OUT21         1440
-MX6Q_PAD_NANDF_D5__USBOH3_UH3_DFD_OUT21         1441
-MX6Q_PAD_NANDF_D5__GPIO_2_5                     1442
-MX6Q_PAD_NANDF_D5__IPU1_IPU_DIAG_BUS_5          1443
-MX6Q_PAD_NANDF_D5__IPU2_IPU_DIAG_BUS_5          1444
-MX6Q_PAD_NANDF_D6__RAWNAND_D6                   1445
-MX6Q_PAD_NANDF_D6__USDHC2_DAT6                  1446
-MX6Q_PAD_NANDF_D6__GPU3D_GPU_DBG_OUT_6          1447
-MX6Q_PAD_NANDF_D6__USBOH3_UH2_DFD_OUT22         1448
-MX6Q_PAD_NANDF_D6__USBOH3_UH3_DFD_OUT22         1449
-MX6Q_PAD_NANDF_D6__GPIO_2_6                     1450
-MX6Q_PAD_NANDF_D6__IPU1_IPU_DIAG_BUS_6          1451
-MX6Q_PAD_NANDF_D6__IPU2_IPU_DIAG_BUS_6          1452
-MX6Q_PAD_NANDF_D7__RAWNAND_D7                   1453
-MX6Q_PAD_NANDF_D7__USDHC2_DAT7                  1454
-MX6Q_PAD_NANDF_D7__GPU3D_GPU_DBG_OUT_7          1455
-MX6Q_PAD_NANDF_D7__USBOH3_UH2_DFD_OUT23         1456
-MX6Q_PAD_NANDF_D7__USBOH3_UH3_DFD_OUT23         1457
-MX6Q_PAD_NANDF_D7__GPIO_2_7                     1458
-MX6Q_PAD_NANDF_D7__IPU1_IPU_DIAG_BUS_7          1459
-MX6Q_PAD_NANDF_D7__IPU2_IPU_DIAG_BUS_7          1460
-MX6Q_PAD_SD4_DAT0__RAWNAND_D8                   1461
-MX6Q_PAD_SD4_DAT0__USDHC4_DAT0                  1462
-MX6Q_PAD_SD4_DAT0__RAWNAND_DQS                  1463
-MX6Q_PAD_SD4_DAT0__USBOH3_UH2_DFD_OUT24         1464
-MX6Q_PAD_SD4_DAT0__USBOH3_UH3_DFD_OUT24         1465
-MX6Q_PAD_SD4_DAT0__GPIO_2_8                     1466
-MX6Q_PAD_SD4_DAT0__IPU1_IPU_DIAG_BUS_8          1467
-MX6Q_PAD_SD4_DAT0__IPU2_IPU_DIAG_BUS_8          1468
-MX6Q_PAD_SD4_DAT1__RAWNAND_D9                   1469
-MX6Q_PAD_SD4_DAT1__USDHC4_DAT1                  1470
-MX6Q_PAD_SD4_DAT1__PWM3_PWMO                    1471
-MX6Q_PAD_SD4_DAT1__USBOH3_UH2_DFD_OUT25         1472
-MX6Q_PAD_SD4_DAT1__USBOH3_UH3_DFD_OUT25         1473
-MX6Q_PAD_SD4_DAT1__GPIO_2_9                     1474
-MX6Q_PAD_SD4_DAT1__IPU1_IPU_DIAG_BUS_9          1475
-MX6Q_PAD_SD4_DAT1__IPU2_IPU_DIAG_BUS_9          1476
-MX6Q_PAD_SD4_DAT2__RAWNAND_D10                  1477
-MX6Q_PAD_SD4_DAT2__USDHC4_DAT2                  1478
-MX6Q_PAD_SD4_DAT2__PWM4_PWMO                    1479
-MX6Q_PAD_SD4_DAT2__USBOH3_UH2_DFD_OUT26         1480
-MX6Q_PAD_SD4_DAT2__USBOH3_UH3_DFD_OUT26         1481
-MX6Q_PAD_SD4_DAT2__GPIO_2_10                    1482
-MX6Q_PAD_SD4_DAT2__IPU1_IPU_DIAG_BUS_10         1483
-MX6Q_PAD_SD4_DAT2__IPU2_IPU_DIAG_BUS_10         1484
-MX6Q_PAD_SD4_DAT3__RAWNAND_D11                  1485
-MX6Q_PAD_SD4_DAT3__USDHC4_DAT3                  1486
-MX6Q_PAD_SD4_DAT3__USBOH3_UH2_DFD_OUT27         1487
-MX6Q_PAD_SD4_DAT3__USBOH3_UH3_DFD_OUT27         1488
-MX6Q_PAD_SD4_DAT3__GPIO_2_11                    1489
-MX6Q_PAD_SD4_DAT3__IPU1_IPU_DIAG_BUS_11         1490
-MX6Q_PAD_SD4_DAT3__IPU2_IPU_DIAG_BUS_11         1491
-MX6Q_PAD_SD4_DAT4__RAWNAND_D12                  1492
-MX6Q_PAD_SD4_DAT4__USDHC4_DAT4                  1493
-MX6Q_PAD_SD4_DAT4__UART2_RXD                    1494
-MX6Q_PAD_SD4_DAT4__USBOH3_UH2_DFD_OUT28         1495
-MX6Q_PAD_SD4_DAT4__USBOH3_UH3_DFD_OUT28         1496
-MX6Q_PAD_SD4_DAT4__GPIO_2_12                    1497
-MX6Q_PAD_SD4_DAT4__IPU1_IPU_DIAG_BUS_12         1498
-MX6Q_PAD_SD4_DAT4__IPU2_IPU_DIAG_BUS_12         1499
-MX6Q_PAD_SD4_DAT5__RAWNAND_D13                  1500
-MX6Q_PAD_SD4_DAT5__USDHC4_DAT5                  1501
-MX6Q_PAD_SD4_DAT5__UART2_RTS                    1502
-MX6Q_PAD_SD4_DAT5__USBOH3_UH2_DFD_OUT29         1503
-MX6Q_PAD_SD4_DAT5__USBOH3_UH3_DFD_OUT29         1504
-MX6Q_PAD_SD4_DAT5__GPIO_2_13                    1505
-MX6Q_PAD_SD4_DAT5__IPU1_IPU_DIAG_BUS_13         1506
-MX6Q_PAD_SD4_DAT5__IPU2_IPU_DIAG_BUS_13         1507
-MX6Q_PAD_SD4_DAT6__RAWNAND_D14                  1508
-MX6Q_PAD_SD4_DAT6__USDHC4_DAT6                  1509
-MX6Q_PAD_SD4_DAT6__UART2_CTS                    1510
-MX6Q_PAD_SD4_DAT6__USBOH3_UH2_DFD_OUT30         1511
-MX6Q_PAD_SD4_DAT6__USBOH3_UH3_DFD_OUT30         1512
-MX6Q_PAD_SD4_DAT6__GPIO_2_14                    1513
-MX6Q_PAD_SD4_DAT6__IPU1_IPU_DIAG_BUS_14         1514
-MX6Q_PAD_SD4_DAT6__IPU2_IPU_DIAG_BUS_14         1515
-MX6Q_PAD_SD4_DAT7__RAWNAND_D15                  1516
-MX6Q_PAD_SD4_DAT7__USDHC4_DAT7                  1517
-MX6Q_PAD_SD4_DAT7__UART2_TXD                    1518
-MX6Q_PAD_SD4_DAT7__USBOH3_UH2_DFD_OUT31         1519
-MX6Q_PAD_SD4_DAT7__USBOH3_UH3_DFD_OUT31         1520
-MX6Q_PAD_SD4_DAT7__GPIO_2_15                    1521
-MX6Q_PAD_SD4_DAT7__IPU1_IPU_DIAG_BUS_15         1522
-MX6Q_PAD_SD4_DAT7__IPU2_IPU_DIAG_BUS_15         1523
-MX6Q_PAD_SD1_DAT1__USDHC1_DAT1                  1524
-MX6Q_PAD_SD1_DAT1__ECSPI5_SS0                   1525
-MX6Q_PAD_SD1_DAT1__PWM3_PWMO                    1526
-MX6Q_PAD_SD1_DAT1__GPT_CAPIN2                   1527
-MX6Q_PAD_SD1_DAT1__PCIE_CTRL_MUX_7              1528
-MX6Q_PAD_SD1_DAT1__GPIO_1_17                    1529
-MX6Q_PAD_SD1_DAT1__HDMI_TX_OPHYDTB_0            1530
-MX6Q_PAD_SD1_DAT1__ANATOP_TESTO_8               1531
-MX6Q_PAD_SD1_DAT0__USDHC1_DAT0                  1532
-MX6Q_PAD_SD1_DAT0__ECSPI5_MISO                  1533
-MX6Q_PAD_SD1_DAT0__CAAM_WRAP_RNG_OSCOBS         1534
-MX6Q_PAD_SD1_DAT0__GPT_CAPIN1                   1535
-MX6Q_PAD_SD1_DAT0__PCIE_CTRL_MUX_8              1536
-MX6Q_PAD_SD1_DAT0__GPIO_1_16                    1537
-MX6Q_PAD_SD1_DAT0__HDMI_TX_OPHYDTB_1            1538
-MX6Q_PAD_SD1_DAT0__ANATOP_TESTO_7               1539
-MX6Q_PAD_SD1_DAT3__USDHC1_DAT3                  1540
-MX6Q_PAD_SD1_DAT3__ECSPI5_SS2                   1541
-MX6Q_PAD_SD1_DAT3__GPT_CMPOUT3                  1542
-MX6Q_PAD_SD1_DAT3__PWM1_PWMO                    1543
-MX6Q_PAD_SD1_DAT3__WDOG2_WDOG_B                 1544
-MX6Q_PAD_SD1_DAT3__GPIO_1_21                    1545
-MX6Q_PAD_SD1_DAT3__WDOG2_WDOG_RST_B_DEB         1546
-MX6Q_PAD_SD1_DAT3__ANATOP_TESTO_6               1547
-MX6Q_PAD_SD1_CMD__USDHC1_CMD                    1548
-MX6Q_PAD_SD1_CMD__ECSPI5_MOSI                   1549
-MX6Q_PAD_SD1_CMD__PWM4_PWMO                     1550
-MX6Q_PAD_SD1_CMD__GPT_CMPOUT1                   1551
-MX6Q_PAD_SD1_CMD__GPIO_1_18                     1552
-MX6Q_PAD_SD1_CMD__ANATOP_TESTO_5                1553
-MX6Q_PAD_SD1_DAT2__USDHC1_DAT2                  1554
-MX6Q_PAD_SD1_DAT2__ECSPI5_SS1                   1555
-MX6Q_PAD_SD1_DAT2__GPT_CMPOUT2                  1556
-MX6Q_PAD_SD1_DAT2__PWM2_PWMO                    1557
-MX6Q_PAD_SD1_DAT2__WDOG1_WDOG_B                 1558
-MX6Q_PAD_SD1_DAT2__GPIO_1_19                    1559
-MX6Q_PAD_SD1_DAT2__WDOG1_WDOG_RST_B_DEB         1560
-MX6Q_PAD_SD1_DAT2__ANATOP_TESTO_4               1561
-MX6Q_PAD_SD1_CLK__USDHC1_CLK                    1562
-MX6Q_PAD_SD1_CLK__ECSPI5_SCLK                   1563
-MX6Q_PAD_SD1_CLK__OSC32K_32K_OUT                1564
-MX6Q_PAD_SD1_CLK__GPT_CLKIN                     1565
-MX6Q_PAD_SD1_CLK__GPIO_1_20                     1566
-MX6Q_PAD_SD1_CLK__PHY_DTB_0                     1567
-MX6Q_PAD_SD1_CLK__SATA_PHY_DTB_0                1568
-MX6Q_PAD_SD2_CLK__USDHC2_CLK                    1569
-MX6Q_PAD_SD2_CLK__ECSPI5_SCLK                   1570
-MX6Q_PAD_SD2_CLK__KPP_COL_5                     1571
-MX6Q_PAD_SD2_CLK__AUDMUX_AUD4_RXFS              1572
-MX6Q_PAD_SD2_CLK__PCIE_CTRL_MUX_9               1573
-MX6Q_PAD_SD2_CLK__GPIO_1_10                     1574
-MX6Q_PAD_SD2_CLK__PHY_DTB_1                     1575
-MX6Q_PAD_SD2_CLK__SATA_PHY_DTB_1                1576
-MX6Q_PAD_SD2_CMD__USDHC2_CMD                    1577
-MX6Q_PAD_SD2_CMD__ECSPI5_MOSI                   1578
-MX6Q_PAD_SD2_CMD__KPP_ROW_5                     1579
-MX6Q_PAD_SD2_CMD__AUDMUX_AUD4_RXC               1580
-MX6Q_PAD_SD2_CMD__PCIE_CTRL_MUX_10              1581
-MX6Q_PAD_SD2_CMD__GPIO_1_11                     1582
-MX6Q_PAD_SD2_DAT3__USDHC2_DAT3                  1583
-MX6Q_PAD_SD2_DAT3__ECSPI5_SS3                   1584
-MX6Q_PAD_SD2_DAT3__KPP_COL_6                    1585
-MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC              1586
-MX6Q_PAD_SD2_DAT3__PCIE_CTRL_MUX_11             1587
-MX6Q_PAD_SD2_DAT3__GPIO_1_12                    1588
-MX6Q_PAD_SD2_DAT3__SJC_DONE                     1589
-MX6Q_PAD_SD2_DAT3__ANATOP_TESTO_3               1590
-MX6Q_PAD_ENET_RX_ER__ANATOP_USBOTG_ID           1591
-MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID               1592
+Refer to imx6q-pinfunc.h in device tree source folder for all available
+imx6q PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6sl-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sl-pinctrl.txt
new file mode 100644
index 000000000000..e5f6d1f065a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sl-pinctrl.txt
@@ -0,0 +1,39 @@
+* Freescale IMX6 SoloLite IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx6sl-iomuxc"
+- fsl,pins: two integers array, represents a group of pins mux and config
+  setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
+  pin working on a specific function, CONFIG is the pad setting value like
+  pull-up for this pin. Please refer to imx6sl datasheet for the valid pad
+  config settings.
+
+CONFIG bits definition:
+PAD_CTL_LVE                     (1 << 22)
+PAD_CTL_HYS                     (1 << 16)
+PAD_CTL_PUS_100K_DOWN           (0 << 14)
+PAD_CTL_PUS_47K_UP              (1 << 14)
+PAD_CTL_PUS_100K_UP             (2 << 14)
+PAD_CTL_PUS_22K_UP              (3 << 14)
+PAD_CTL_PUE                     (1 << 13)
+PAD_CTL_PKE                     (1 << 12)
+PAD_CTL_ODE                     (1 << 11)
+PAD_CTL_SPEED_LOW               (1 << 6)
+PAD_CTL_SPEED_MED               (2 << 6)
+PAD_CTL_SPEED_HIGH              (3 << 6)
+PAD_CTL_DSE_DISABLE             (0 << 3)
+PAD_CTL_DSE_240ohm              (1 << 3)
+PAD_CTL_DSE_120ohm              (2 << 3)
+PAD_CTL_DSE_80ohm               (3 << 3)
+PAD_CTL_DSE_60ohm               (4 << 3)
+PAD_CTL_DSE_48ohm               (5 << 3)
+PAD_CTL_DSE_40ohm               (6 << 3)
+PAD_CTL_DSE_34ohm               (7 << 3)
+PAD_CTL_SRE_FAST                (1 << 0)
+PAD_CTL_SRE_SLOW                (0 << 0)
+
+Refer to imx6sl-pinfunc.h in device tree source folder for all available
+imx6sl PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
index 2c81e45f1374..08f0c3d01575 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
@@ -1,7 +1,9 @@
 One-register-per-pin type device tree based pinctrl driver
 
 Required properties:
-- compatible : "pinctrl-single"
+- compatible : "pinctrl-single" or "pinconf-single".
+  "pinctrl-single" means that pinconf isn't supported.
+  "pinconf-single" means that generic pinconf is supported.
 
 - reg : offset and length of the register set for the mux registers
 
@@ -14,9 +16,61 @@ Optional properties:
 - pinctrl-single,function-off : function off mode for disabled state if
   available and same for all registers; if not specified, disabling of
   pin functions is ignored
+
 - pinctrl-single,bit-per-mux : boolean to indicate that one register controls
   more than one pin
 
+- pinctrl-single,drive-strength : array of value that are used to configure
+  drive strength in the pinmux register. They're value of drive strength
+  current and drive strength mask.
+
+                /* drive strength current, mask */
+                pinctrl-single,power-source = <0x30 0xf0>;
+
+- pinctrl-single,bias-pullup : array of value that are used to configure the
+  input bias pullup in the pinmux register.
+
+                /* input, enabled pullup bits, disabled pullup bits, mask */
+                pinctrl-single,bias-pullup = <0 1 0 1>;
+
+- pinctrl-single,bias-pulldown : array of value that are used to configure the
+  input bias pulldown in the pinmux register.
+
+                /* input, enabled pulldown bits, disabled pulldown bits, mask */
+                pinctrl-single,bias-pulldown = <2 2 0 2>;
+
+  * Two bits to control input bias pullup and pulldown: User should use
+    pinctrl-single,bias-pullup & pinctrl-single,bias-pulldown. One bit means
+    pullup, and the other one bit means pulldown.
+  * Three bits to control input bias enable, pullup and pulldown. User should
+    use pinctrl-single,bias-pullup & pinctrl-single,bias-pulldown. Input bias
+    enable bit should be included in pullup or pulldown bits.
+  * Although driver could set PIN_CONFIG_BIAS_DISABLE, there's no property as
+    pinctrl-single,bias-disable. Because pinctrl single driver could implement
+    it by calling pulldown, pullup disabled.
+
+- pinctrl-single,input-schmitt : array of value that are used to configure
+  input schmitt in the pinmux register. In some silicons, there're two input
+  schmitt value (rising-edge & falling-edge) in the pinmux register.
+
+                /* input schmitt value, mask */
+                pinctrl-single,input-schmitt = <0x30 0x70>;
+
+- pinctrl-single,input-schmitt-enable : array of value that are used to
+  configure input schmitt enable or disable in the pinmux register.
+
+                /* input, enable bits, disable bits, mask */
+                pinctrl-single,input-schmitt-enable = <0x30 0x40 0 0x70>;
+
+- pinctrl-single,gpio-range : list of value that are used to configure a GPIO
+  range. They're value of subnode phandle, pin base in pinctrl device, pin
+  number in this range, GPIO function value of this GPIO range.
+  The number of parameters is depend on #pinctrl-single,gpio-range-cells
+  property.
+
+                /* pin base, nr pins & gpio function */
+                pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1>;
+
 This driver assumes that there is only one register for each pin (unless the
 pinctrl-single,bit-per-mux is set), and uses the common pinctrl bindings as
 specified in the pinctrl-bindings.txt document in this directory.
@@ -42,6 +96,20 @@ Where 0xdc is the offset from the pinctrl register base address for the
 device pinctrl register, 0x18 is the desired value, and 0xff is the sub mask to
 be used when applying this change to the register.
 
+
+Optional sub-node: In case some pins could be configured as GPIO in the pinmux
+register, those pins could be defined as a GPIO range. This sub-node is required
+by pinctrl-single,gpio-range property.
+
+Required properties in sub-node:
+- #pinctrl-single,gpio-range-cells : the number of parameters after phandle in
+  pinctrl-single,gpio-range property.
+
+        range: gpio-range {
+                #pinctrl-single,gpio-range-cells = <3>;
+        };
+
+
 Example:
 
 /* SoC common file */
@@ -58,7 +126,7 @@ pmx_core: pinmux@4a100040 {
 
 /* second controller instance for pins in wkup domain */
 pmx_wkup: pinmux@4a31e040 {
-        compatible = "pinctrl-single;
+        compatible = "pinctrl-single";
         reg = <0x4a31e040 0x0038>;
         #address-cells = <1>;
         #size-cells = <0>;
@@ -76,6 +144,29 @@ control_devconf0: pinmux@48002274 {
         pinctrl-single,function-mask = <0x5F>;
 };
 
+/* third controller instance for pins in gpio domain */
+pmx_gpio: pinmux@d401e000 {
+        compatible = "pinconf-single";
+        reg = <0xd401e000 0x0330>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        pinctrl-single,register-width = <32>;
+        pinctrl-single,function-mask = <7>;
+
+        /* sparse GPIO range could be supported */
+        pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1
+                                &range 12 1 0 &range 13 29 1
+                                &range 43 1 0 &range 44 49 1
+                                &range 94 1 1 &range 96 2 1>;
+
+        range: gpio-range {
+                #pinctrl-single,gpio-range-cells = <3>;
+        };
+};
+
+
 /* board specific .dts file */
 
 &pmx_core {
@@ -96,6 +187,15 @@ control_devconf0: pinmux@48002274 {
                 >;
         };
 
+        uart0_pins: pinmux_uart0_pins {
+                pinctrl-single,pins = <
+                        0x208 0         /* UART0_RXD (IOCFG138) */
+                        0x20c 0         /* UART0_TXD (IOCFG139) */
+                >;
+                pinctrl-single,bias-pulldown = <0 2 2>;
+                pinctrl-single,bias-pullup = <0 1 1>;
+        };
+
         /* map uart2 pins */
         uart2_pins: pinmux_uart2_pins {
                 pinctrl-single,pins = <
@@ -122,6 +222,11 @@ control_devconf0: pinmux@48002274 {
 
 };
 
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pins>;
+};
+
 &uart2 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart2_pins>;
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
index 4598a47aa0cd..c70fca146e91 100644
--- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
@@ -7,6 +7,7 @@ on-chip controllers onto these pads.
 
 Required Properties:
 - compatible: should be one of the following.
+  - "samsung,s3c64xx-pinctrl": for S3C64xx-compatible pin-controller,
   - "samsung,exynos4210-pinctrl": for Exynos4210 compatible pin-controller.
   - "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller.
   - "samsung,exynos5250-pinctrl": for Exynos5250 compatible pin-controller.
@@ -105,6 +106,8 @@ B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
 
    - compatible: identifies the type of the external wakeup interrupt controller
      The possible values are:
+     - samsung,s3c64xx-wakeup-eint: represents wakeup interrupt controller
+       found on Samsung S3C64xx SoCs,
      - samsung,exynos4210-wakeup-eint: represents wakeup interrupt controller
        found on Samsung Exynos4210 SoC.
    - interrupt-parent: phandle of the interrupt parent to which the external
diff --git a/Documentation/devicetree/bindings/power_supply/power_supply.txt b/Documentation/devicetree/bindings/power_supply/power_supply.txt
new file mode 100644
index 000000000000..8391bfa0edac
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/power_supply.txt
@@ -0,0 +1,23 @@
+Power Supply Core Support
+
+Optional Properties:
+ - power-supplies : This property is added to a supply in order to list the
+   devices which supply it power, referenced by their phandles.
+
+Example:
+
+        usb-charger: power@e {
+                compatible = "some,usb-charger";
+                ...
+        };
+
+        ac-charger: power@c {
+                compatible = "some,ac-charger";
+                ...
+        };
+
+        battery@b {
+                compatible = "some,battery";
+                ...
+                power-supplies = <&usb-charger>, <&ac-charger>;
+        };
diff --git a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
index 9a599d27bd75..0347d8350d94 100644
--- a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
+++ b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
@@ -2,7 +2,7 @@
 
 QNAP NAS devices have a microcontroller controlling the main power
 supply. This microcontroller is connected to UART1 of the Kirkwood and
-Orion5x SoCs. Sending the charactor 'A', at 19200 baud, tells the
+Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the
 microcontroller to turn the power off. This driver adds a handler to
 pm_power_off which is called to turn the power off.
 
diff --git a/Documentation/devicetree/bindings/power_supply/tps65090.txt b/Documentation/devicetree/bindings/power_supply/tps65090.txt
new file mode 100644
index 000000000000..8e5e0d3910df
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/tps65090.txt
@@ -0,0 +1,17 @@
+TPS65090 Frontend PMU with Switchmode Charger
+
+Required Properties:
+-compatible: "ti,tps65090-charger"
+
+Optional Properties:
+-ti,enable-low-current-chrg: Enables charging when a low current is detected
+ while the default logic is to stop charging.
+
+This node is a subnode of the tps65090 PMIC.
+
+Example:
+
+        tps65090-charger {
+                compatible = "ti,tps65090-charger";
+                ti,enable-low-current-chrg;
+        };
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt
new file mode 100644
index 000000000000..922c30ad90d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt
@@ -0,0 +1,22 @@
+===================================================================
+Power Architecture CPU Binding
+Copyright 2013 Freescale Semiconductor Inc.
+
+Power Architecture CPUs in Freescale SOCs are represented in device trees as
+per the definition in ePAPR.
+
+In addition to the ePAPR definitions, the properties defined below may be
+present on CPU nodes.
+
+PROPERTIES
+
+   - fsl,eref-*
+        Usage: optional
+        Value type: <empty>
+        Definition: The EREF (EREF: A Programmer.s Reference Manual for
+        Freescale Power Architecture) defines the architecture for Freescale
+        Power CPUs.  The EREF defines some architecture categories not defined
+        by the Power ISA.  For these EREF-specific categories, the existence of
+        a property named fsl,eref-[CAT], where [CAT] is the abbreviated category
+        name with all uppercase letters converted to lowercase, indicates that
+        the category is supported by the implementation.
diff --git a/Documentation/devicetree/bindings/regulator/max8952.txt b/Documentation/devicetree/bindings/regulator/max8952.txt
new file mode 100644
index 000000000000..866fcdd0f4eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max8952.txt
@@ -0,0 +1,52 @@
+Maxim MAX8952 voltage regulator
+
+Required properties:
+- compatible: must be equal to "maxim,max8952"
+- reg: I2C slave address, usually 0x60
+- max8952,dvs-mode-microvolt: array of 4 integer values defining DVS voltages
+  in microvolts. All values must be from range <770000, 1400000>
+- any required generic properties defined in regulator.txt
+
+Optional properties:
+- max8952,vid-gpios: array of two GPIO pins used for DVS voltage selection
+- max8952,en-gpio: GPIO used to control enable status of regulator
+- max8952,default-mode: index of default DVS voltage, from <0, 3> range
+- max8952,sync-freq: sync frequency, must be one of following values:
+    - 0: 26 MHz
+    - 1: 13 MHz
+    - 2: 19.2 MHz
+  Defaults to 26 MHz if not specified.
+- max8952,ramp-speed: voltage ramp speed, must be one of following values:
+    - 0: 32mV/us
+    - 1: 16mV/us
+    - 2: 8mV/us
+    - 3: 4mV/us
+    - 4: 2mV/us
+    - 5: 1mV/us
+    - 6: 0.5mV/us
+    - 7: 0.25mV/us
+  Defaults to 32mV/us if not specified.
+- any available generic properties defined in regulator.txt
+
+Example:
+
+        vdd_arm_reg: pmic@60 {
+                compatible = "maxim,max8952";
+                reg = <0x60>;
+
+                /* max8952-specific properties */
+                max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>;
+                max8952,en-gpio = <&gpx0 1 0>;
+                max8952,default-mode = <0>;
+                max8952,dvs-mode-microvolt = <1250000>, <1200000>,
+                                                <1050000>, <950000>;
+                max8952,sync-freq = <0>;
+                max8952,ramp-speed = <0>;
+
+                /* generic regulator properties */
+                regulator-name = "vdd_arm";
+                regulator-min-microvolt = <770000>;
+                regulator-max-microvolt = <1400000>;
+                regulator-always-on;
+                regulator-boot-on;
+        };
diff --git a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
index 9fd69a18b0ba..9e5e51d78868 100644
--- a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
@@ -28,7 +28,7 @@ Required properties:
     safe operating voltage).
 
     If either of the 'max8997,pmic-buck[1/2/5]-uses-gpio-dvs' optional
-    property is specified, then all the eigth voltage values for the
+    property is specified, then all the eight voltage values for the
     'max8997,pmic-buck[1/2/5]-dvs-voltage' should be specified.
 
 Optional properties:
diff --git a/Documentation/devicetree/bindings/rng/brcm,bcm2835.txt b/Documentation/devicetree/bindings/rng/brcm,bcm2835.txt
new file mode 100644
index 000000000000..07ccdaa68324
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/brcm,bcm2835.txt
@@ -0,0 +1,13 @@
+BCM2835 Random number generator
+
+Required properties:
+
+- compatible : should be "brcm,bcm2835-rng"
+- reg : Specifies base physical address and size of the registers.
+
+Example:
+
+rng {
+        compatible = "brcm,bcm2835-rng";
+        reg = <0x7e104000 0x10>;
+};
diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt
new file mode 100644
index 000000000000..2a3feabd3b22
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt
@@ -0,0 +1,15 @@
+Atmel AT91RM9200 Real Time Clock
+
+Required properties:
+- compatible: should be: "atmel,at91rm9200-rtc"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: rtc alarm/event interrupt
+
+Example:
+
+rtc@fffffe00 {
+        compatible = "atmel,at91rm9200-rtc";
+        reg = <0xfffffe00 0x100>;
+        interrupts = <1 4 7>;
+};
diff --git a/Documentation/devicetree/bindings/serio/snps-arc_ps2.txt b/Documentation/devicetree/bindings/serio/snps-arc_ps2.txt
new file mode 100644
index 000000000000..38c2f21e8044
--- /dev/null
+++ b/Documentation/devicetree/bindings/serio/snps-arc_ps2.txt
@@ -0,0 +1,16 @@
+* ARC PS/2 driver: PS/2 block used in some ARC FPGA's & nSIM OSCI model
+
+Required properties:
+- compatible            : "snps,arc_ps2"
+- reg                   : offset and length (always 0x14) of registers
+- interrupts            : interrupt
+- interrupt-names       : name of interrupt, must be "arc_ps2_irq"
+
+Example:
+
+serio@c9000400 {
+        compatible = "snps,arc_ps2";
+        reg = <0xc9000400 0x14>;
+        interrupts = <13>;
+        interrupt-names = "arc_ps2_irq";
+}
diff --git a/Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.txt b/Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.txt
new file mode 100644
index 000000000000..8bf89c643640
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.txt
@@ -0,0 +1,22 @@
+Broadcom BCM2835 SPI0 controller
+
+The BCM2835 contains two forms of SPI master controller, one known simply as
+SPI0, and the other known as the "Universal SPI Master"; part of the
+auxilliary block. This binding applies to the SPI0 controller.
+
+Required properties:
+- compatible: Should be "brcm,bcm2835-spi".
+- reg: Should contain register location and length.
+- interrupts: Should contain interrupt.
+- clocks: The clock feeding the SPI controller.
+
+Example:
+
+spi@20204000 {
+        compatible = "brcm,bcm2835-spi";
+        reg = <0x7e204000 0x1000>;
+        interrupts = <2 22>;
+        clocks = <&clk_spi>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+};
diff --git a/Documentation/devicetree/bindings/spi/fsl-spi.txt b/Documentation/devicetree/bindings/spi/fsl-spi.txt
index 777abd7399d5..b032dd76e9d2 100644
--- a/Documentation/devicetree/bindings/spi/fsl-spi.txt
+++ b/Documentation/devicetree/bindings/spi/fsl-spi.txt
@@ -4,7 +4,7 @@ Required properties:
 - cell-index : QE SPI subblock index.
                 0: QE subblock SPI1
                 1: QE subblock SPI2
-- compatible : should be "fsl,spi".
+- compatible : should be "fsl,spi" or "aeroflexgaisler,spictrl".
 - mode : the SPI operation mode, it can be "cpu" or "cpu-qe".
 - reg : Offset and length of the register set for the device
 - interrupts : <a b> where a is the interrupt number and b is a
@@ -14,6 +14,7 @@ Required properties:
   controller you have.
 - interrupt-parent : the phandle for the interrupt controller that
   services interrupts for this device.
+- clock-frequency : input clock frequency to non FSL_SOC cores
 
 Optional properties:
 - gpios : specifies the gpio pins to be used for chipselects.
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
new file mode 100644
index 000000000000..91ff771c7e77
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
@@ -0,0 +1,26 @@
+NVIDIA Tegra114 SPI controller.
+
+Required properties:
+- compatible : should be "nvidia,tegra114-spi".
+- reg: Should contain SPI registers location and length.
+- interrupts: Should contain SPI interrupts.
+- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
+  request selector for this SPI controller.
+- This is also require clock named "spi" as per binding document
+  Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Recommended properties:
+- spi-max-frequency: Definition as per
+                     Documentation/devicetree/bindings/spi/spi-bus.txt
+Example:
+
+spi@7000d600 {
+        compatible = "nvidia,tegra114-spi";
+        reg = <0x7000d600 0x200>;
+        interrupts = <0 82 0x04>;
+        nvidia,dma-request-selector = <&apbdma 16>;
+        spi-max-frequency = <25000000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/spi/spi-samsung.txt b/Documentation/devicetree/bindings/spi/spi-samsung.txt
index a15ffeddfba4..86aa061f069f 100644
--- a/Documentation/devicetree/bindings/spi/spi-samsung.txt
+++ b/Documentation/devicetree/bindings/spi/spi-samsung.txt
@@ -31,9 +31,6 @@ Required Board Specific Properties:
 
 - #address-cells: should be 1.
 - #size-cells: should be 0.
-- gpios: The gpio specifier for clock, mosi and miso interface lines (in the
-  order specified). The format of the gpio specifier depends on the gpio
-  controller.
 
 Optional Board Specific Properties:
 
@@ -86,9 +83,8 @@ Example:
         spi_0: spi@12d20000 {
                 #address-cells = <1>;
                 #size-cells = <0>;
-                gpios = <&gpa2 4 2 3 0>,
-                        <&gpa2 6 2 3 0>,
-                        <&gpa2 7 2 3 0>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&spi0_bus>;
 
                 w25q80bw@0 {
                         #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/staging/dwc2.txt b/Documentation/devicetree/bindings/staging/dwc2.txt
new file mode 100644
index 000000000000..1a1b7cfa4845
--- /dev/null
+++ b/Documentation/devicetree/bindings/staging/dwc2.txt
@@ -0,0 +1,15 @@
+Platform DesignWare HS OTG USB 2.0 controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "snps,dwc2"
+- reg : Should contain 1 register range (address and length)
+- interrupts : Should contain 1 interrupt
+
+Example:
+
+        usb@101c0000 {
+                compatible = "ralink,rt3050-usb, snps,dwc2";
+                reg = <0x101c0000 40000>;
+                interrupts = <18>;
+        };
diff --git a/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt b/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
index 07654f0338b6..8071ac20d4b3 100644
--- a/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
+++ b/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
@@ -26,7 +26,7 @@ Required properties:
 - crtc: the crtc this display is connected to, see below
 Optional properties:
 - interface_pix_fmt: How this display is connected to the
-  crtc. Currently supported types: "rgb24", "rgb565"
+  crtc. Currently supported types: "rgb24", "rgb565", "bgr666"
 - edid: verbatim EDID data block describing attached display.
 - ddc: phandle describing the i2c bus handling the display data
   channel
diff --git a/Documentation/devicetree/bindings/timer/allwinner,sunxi-timer.txt b/Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt
index 0c7b64e95a61..48aeb7884ed3 100644
--- a/Documentation/devicetree/bindings/timer/allwinner,sunxi-timer.txt
+++ b/Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt
@@ -2,7 +2,7 @@ Allwinner A1X SoCs Timer Controller
 
 Required properties:
 
-- compatible : should be "allwinner,sunxi-timer"
+- compatible : should be "allwinner,sun4i-timer"
 - reg : Specifies base physical address and size of the registers.
 - interrupts : The interrupt of the first timer
 - clocks: phandle to the source clock (usually a 24 MHz fixed clock)
@@ -10,7 +10,7 @@ Required properties:
 Example:
 
 timer {
-        compatible = "allwinner,sunxi-timer";
+        compatible = "allwinner,sun4i-timer";
         reg = <0x01c20c00 0x400>;
         interrupts = <22>;
         clocks = <&osc>;
diff --git a/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt b/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt
new file mode 100644
index 000000000000..9809b11f7180
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt
@@ -0,0 +1,18 @@
+Freescale i.MX General Purpose Timer (GPT)
+
+Required properties:
+
+- compatible : should be "fsl,<soc>-gpt"
+- reg : Specifies base physical address and size of the registers.
+- interrupts : A list of 4 interrupts; one per timer channel.
+- clocks : The clocks provided by the SoC to drive the timer.
+
+Example:
+
+gpt1: timer@10003000 {
+        compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+        reg = <0x10003000 0x1000>;
+        interrupts = <26>;
+        clocks = <&clks 46>, <&clks 61>;
+        clock-names = "ipg", "per";
+};
diff --git a/Documentation/devicetree/bindings/tty/serial/of-serial.txt b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
index 8f01cb190f25..1928a3e83cd0 100644
--- a/Documentation/devicetree/bindings/tty/serial/of-serial.txt
+++ b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
@@ -33,6 +33,10 @@ Optional properties:
   RTAS and should not be registered.
 - no-loopback-test: set to indicate that the port does not implements loopback
   test mode
+- fifo-size: the fifo size of the UART.
+- auto-flow-control: one way to enable automatic flow control support. The
+  driver is allowed to detect support for the capability even without this
+  property.
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
index 5778b9c83bd8..1c04a4c9515f 100644
--- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
+++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
@@ -11,6 +11,7 @@ Optional properties:
   that indicate usb controller index
 - vbus-supply: regulator for vbus
 - disable-over-current: disable over current detect
+- external-vbus-divider: enables off-chip resistor divider for Vbus
 
 Examples:
 usb@02184000 { /* USB OTG */
@@ -20,4 +21,5 @@ usb@02184000 { /* USB OTG */
         fsl,usbphy = <&usbphy1>;
         fsl,usbmisc = <&usbmisc 0>;
         disable-over-current;
+        external-vbus-divider;
 };
diff --git a/Documentation/devicetree/bindings/usb/ehci-omap.txt b/Documentation/devicetree/bindings/usb/ehci-omap.txt
new file mode 100644
index 000000000000..485a9a1efa7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ehci-omap.txt
@@ -0,0 +1,32 @@
+OMAP HS USB EHCI controller
+
+This device is usually the child of the omap-usb-host
+Documentation/devicetree/bindings/mfd/omap-usb-host.txt
+
+Required properties:
+
+- compatible: should be "ti,ehci-omap"
+- reg: should contain one register range i.e. start and length
+- interrupts: description of the interrupt line
+
+Optional properties:
+
+- phys: list of phandles to PHY nodes.
+  This property is required if at least one of the ports are in
+  PHY mode i.e. OMAP_EHCI_PORT_MODE_PHY
+
+To specify the port mode, see
+Documentation/devicetree/bindings/mfd/omap-usb-host.txt
+
+Example for OMAP4:
+
+usbhsehci: ehci@4a064c00 {
+        compatible = "ti,ehci-omap", "usb-ehci";
+        reg = <0x4a064c00 0x400>;
+        interrupts = <0 77 0x4>;
+};
+
+&usbhsehci {
+        phys = <&hsusb1_phy 0 &hsusb3_phy>;
+};
+
diff --git a/Documentation/devicetree/bindings/usb/ohci-omap3.txt b/Documentation/devicetree/bindings/usb/ohci-omap3.txt
new file mode 100644
index 000000000000..14ab42812a8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ohci-omap3.txt
@@ -0,0 +1,15 @@
+OMAP HS USB OHCI controller (OMAP3 and later)
+
+Required properties:
+
+- compatible: should be "ti,ohci-omap3"
+- reg: should contain one register range i.e. start and length
+- interrupts: description of the interrupt line
+
+Example for OMAP4:
+
+usbhsohci: ohci@4a064800 {
+        compatible = "ti,ohci-omap3", "usb-ohci";
+        reg = <0x4a064800 0x400>;
+        interrupts = <0 76 0x4>;
+};
diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
index 1ef0ce71f8fa..662f0f1d2315 100644
--- a/Documentation/devicetree/bindings/usb/omap-usb.txt
+++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
@@ -8,10 +8,10 @@ OMAP MUSB GLUE
    and disconnect.
  - multipoint : Should be "1" indicating the musb controller supports
    multipoint. This is a MUSB configuration-specific setting.
- - num_eps : Specifies the number of endpoints. This is also a
+ - num-eps : Specifies the number of endpoints. This is also a
    MUSB configuration-specific setting. Should be set to "16"
- - ram_bits : Specifies the ram address size. Should be set to "12"
- - interface_type : This is a board specific setting to describe the type of
+ - ram-bits : Specifies the ram address size. Should be set to "12"
+ - interface-type : This is a board specific setting to describe the type of
    interface between the controller and the phy. It should be "0" or "1"
    specifying ULPI and UTMI respectively.
  - mode : Should be "3" to represent OTG. "1" signifies HOST and "2"
@@ -29,18 +29,46 @@ usb_otg_hs: usb_otg_hs@4a0ab000 {
         ti,hwmods = "usb_otg_hs";
         ti,has-mailbox;
         multipoint = <1>;
-        num_eps = <16>;
-        ram_bits = <12>;
+        num-eps = <16>;
+        ram-bits = <12>;
         ctrl-module = <&omap_control_usb>;
 };
 
 Board specific device node entry
 &usb_otg_hs {
-        interface_type = <1>;
+        interface-type = <1>;
         mode = <3>;
         power = <50>;
 };
 
+OMAP DWC3 GLUE
+ - compatible : Should be "ti,dwc3"
+ - ti,hwmods : Should be "usb_otg_ss"
+ - reg : Address and length of the register set for the device.
+ - interrupts : The irq number of this device that is used to interrupt the
+   MPU
+ - #address-cells, #size-cells : Must be present if the device has sub-nodes
+ - utmi-mode : controls the source of UTMI/PIPE status for VBUS and OTG ID.
+   It should be set to "1" for HW mode and "2" for SW mode.
+ - ranges: the child address space are mapped 1:1 onto the parent address space
+
+Sub-nodes:
+The dwc3 core should be added as subnode to omap dwc3 glue.
+- dwc3 :
+   The binding details of dwc3 can be found in:
+   Documentation/devicetree/bindings/usb/dwc3.txt
+
+omap_dwc3 {
+        compatible = "ti,dwc3";
+        ti,hwmods = "usb_otg_ss";
+        reg = <0x4a020000 0x1ff>;
+        interrupts = <0 93 4>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        utmi-mode = <2>;
+        ranges;
+};
+
 OMAP CONTROL USB
 
 Required properties:
diff --git a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
index 033194934f64..33fd3543f3f8 100644
--- a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
+++ b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
@@ -1,20 +1,25 @@
-* Samsung's usb phy transceiver
+SAMSUNG USB-PHY controllers
 
-The Samsung's phy transceiver is used for controlling usb phy for
-s3c-hsotg as well as ehci-s5p and ohci-exynos usb controllers
-across Samsung SOCs.
+** Samsung's usb 2.0 phy transceiver
+
+The Samsung's usb 2.0 phy transceiver is used for controlling
+usb 2.0 phy for s3c-hsotg as well as ehci-s5p and ohci-exynos
+usb controllers across Samsung SOCs.
 TODO: Adding the PHY binding with controller(s) according to the under
-developement generic PHY driver.
+development generic PHY driver.
 
 Required properties:
 
 Exynos4210:
-- compatible : should be "samsung,exynos4210-usbphy"
+- compatible : should be "samsung,exynos4210-usb2phy"
 - reg : base physical address of the phy registers and length of memory mapped
         region.
+- clocks: Clock IDs array as required by the controller.
+- clock-names: names of clock correseponding IDs clock property as requested
+               by the controller driver.
 
 Exynos5250:
-- compatible : should be "samsung,exynos5250-usbphy"
+- compatible : should be "samsung,exynos5250-usb2phy"
 - reg : base physical address of the phy registers and length of memory mapped
         region.
 
@@ -44,12 +49,69 @@ Example:
         usbphy@125B0000 {
                 #address-cells = <1>;
                 #size-cells = <1>;
-                compatible = "samsung,exynos4210-usbphy";
+                compatible = "samsung,exynos4210-usb2phy";
                 reg = <0x125B0000 0x100>;
                 ranges;
 
+                clocks = <&clock 2>, <&clock 305>;
+                clock-names = "xusbxti", "otg";
+
                 usbphy-sys {
                         /* USB device and host PHY_CONTROL registers */
                         reg = <0x10020704 0x8>;
                 };
         };
+
+
+** Samsung's usb 3.0 phy transceiver
+
+Starting exynso5250, Samsung's SoC have usb 3.0 phy transceiver
+which is used for controlling usb 3.0 phy for dwc3-exynos usb 3.0
+controllers across Samsung SOCs.
+
+Required properties:
+
+Exynos5250:
+- compatible : should be "samsung,exynos5250-usb3phy"
+- reg : base physical address of the phy registers and length of memory mapped
+        region.
+- clocks: Clock IDs array as required by the controller.
+- clock-names: names of clocks correseponding to IDs in the clock property
+               as requested by the controller driver.
+
+Optional properties:
+- #address-cells: should be '1' when usbphy node has a child node with 'reg'
+                  property.
+- #size-cells: should be '1' when usbphy node has a child node with 'reg'
+               property.
+- ranges: allows valid translation between child's address space and parent's
+          address space.
+
+- The child node 'usbphy-sys' to the node 'usbphy' is for the system controller
+  interface for usb-phy. It should provide the following information required by
+  usb-phy controller to control phy.
+  - reg : base physical address of PHY_CONTROL registers.
+          The size of this register is the total sum of size of all PHY_CONTROL
+          registers that the SoC has. For example, the size will be
+          '0x4' in case we have only one PHY_CONTROL register (e.g.
+          OTHERS register in S3C64XX or USB_PHY_CONTROL register in S5PV210)
+          and, '0x8' in case we have two PHY_CONTROL registers (e.g.
+          USBDEVICE_PHY_CONTROL and USBHOST_PHY_CONTROL registers in exynos4x).
+          and so on.
+
+Example:
+        usbphy@12100000 {
+                compatible = "samsung,exynos5250-usb3phy";
+                reg = <0x12100000 0x100>;
+                #address-cells = <1>;
+                #size-cells = <1>;
+                ranges;
+
+                clocks = <&clock 1>, <&clock 286>;
+                clock-names = "ext_xtal", "usbdrd30";
+
+                usbphy-sys {
+                        /* USB device and host PHY_CONTROL registers */
+                        reg = <0x10040704 0x8>;
+                };
+        };
diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
new file mode 100644
index 000000000000..d7e272671c7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
@@ -0,0 +1,34 @@
+USB NOP PHY
+
+Required properties:
+- compatible: should be usb-nop-xceiv
+
+Optional properties:
+- clocks: phandle to the PHY clock. Use as per Documentation/devicetree
+  /bindings/clock/clock-bindings.txt
+  This property is required if clock-frequency is specified.
+
+- clock-names: Should be "main_clk"
+
+- clock-frequency: the clock frequency (in Hz) that the PHY clock must
+  be configured to.
+
+- vcc-supply: phandle to the regulator that provides RESET to the PHY.
+
+- reset-supply: phandle to the regulator that provides power to the PHY.
+
+Example:
+
+        hsusb1_phy {
+                compatible = "usb-nop-xceiv";
+                clock-frequency = <19200000>;
+                clocks = <&osc 0>;
+                clock-names = "main_clk";
+                vcc-supply = <&hsusb1_vcc_regulator>;
+                reset-supply = <&hsusb1_reset_regulator>;
+        };
+
+hsusb1_phy is a NOP USB PHY device that gets its clock from an oscillator
+and expects that clock to be configured to 19.2MHz by the NOP PHY driver.
+hsusb1_vcc_regulator provides power to the PHY and hsusb1_reset_regulator
+controls RESET.
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 19e1ef73ab0d..4d1919bf2332 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -5,6 +5,7 @@ using them to avoid name-space collisions.
 
 ad      Avionic Design GmbH
 adi     Analog Devices, Inc.
+aeroflexgaisler Aeroflex Gaisler AB
 ak      Asahi Kasei Corp.
 amcc    Applied Micro Circuits Corporation (APM, formally AMCC)
 apm     Applied Micro Circuits Corporation (APM)
@@ -48,6 +49,7 @@ samsung	Samsung Semiconductor
 sbs     Smart Battery System
 schindler       Schindler
 sil     Silicon Image
+silabs  Silicon Laboratories
 simtek
 sirf    SiRF Technology, Inc.
 snps    Synopsys, Inc.
diff --git a/Documentation/devicetree/bindings/video/backlight/lp855x.txt b/Documentation/devicetree/bindings/video/backlight/lp855x.txt
new file mode 100644
index 000000000000..1482103d288f
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/backlight/lp855x.txt
@@ -0,0 +1,41 @@
+lp855x bindings
+
+Required properties:
+  - compatible: "ti,lp8550", "ti,lp8551", "ti,lp8552", "ti,lp8553",
+                "ti,lp8556", "ti,lp8557"
+  - reg: I2C slave address (u8)
+  - dev-ctrl: Value of DEVICE CONTROL register (u8). It depends on the device.
+
+Optional properties:
+  - bl-name: Backlight device name (string)
+  - init-brt: Initial value of backlight brightness (u8)
+  - pwm-period: PWM period value. Set only PWM input mode used (u32)
+  - rom-addr: Register address of ROM area to be updated (u8)
+  - rom-val: Register value to be updated (u8)
+
+Example:
+
+        /* LP8556 */
+        backlight@2c {
+                compatible = "ti,lp8556";
+                reg = <0x2c>;
+
+                bl-name = "lcd-bl";
+                dev-ctrl = /bits/ 8 <0x85>;
+                init-brt = /bits/ 8 <0x10>;
+        };
+
+        /* LP8557 */
+        backlight@2c {
+                compatible = "ti,lp8557";
+                reg = <0x2c>;
+
+                dev-ctrl = /bits/ 8 <0x41>;
+                init-brt = /bits/ 8 <0x0a>;
+
+                /* 4V OV, 4 output LED string enabled */
+                rom_14h {
+                        rom-addr = /bits/ 8 <0x14>;
+                        rom-val = /bits/ 8 <0xcf>;
+                };
+        };
diff --git a/Documentation/devicetree/bindings/video/backlight/tps65217-backlight.txt b/Documentation/devicetree/bindings/video/backlight/tps65217-backlight.txt
new file mode 100644
index 000000000000..5fb9279ac287
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/backlight/tps65217-backlight.txt
@@ -0,0 +1,27 @@
+TPS65217 family of regulators
+
+The TPS65217 chip contains a boost converter and current sinks which can be
+used to drive LEDs for use as backlights.
+
+Required properties:
+- compatible: "ti,tps65217"
+- reg: I2C slave address
+- backlight: node for specifying WLED1 and WLED2 lines in TPS65217
+- isel: selection bit, valid values: 1 for ISEL1 (low-level) and 2 for ISEL2 (high-level)
+- fdim: PWM dimming frequency, valid values: 100, 200, 500, 1000
+- default-brightness: valid values: 0-100
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+        tps: tps@24 {
+                reg = <0x24>;
+                compatible = "ti,tps65217";
+                backlight {
+                        isel = <1>;  /* 1 - ISET1, 2 ISET2 */
+                        fdim = <100>; /* TPS65217_BL_FDIM_100HZ */
+                        default-brightness = <50>;
+                };
+        };
+
diff --git a/Documentation/devicetree/bindings/video/via,vt8500-fb.txt b/Documentation/devicetree/bindings/video/via,vt8500-fb.txt
index c870b6478ec8..2871e218a0fb 100644
--- a/Documentation/devicetree/bindings/video/via,vt8500-fb.txt
+++ b/Documentation/devicetree/bindings/video/via,vt8500-fb.txt
@@ -5,58 +5,32 @@ Required properties:
 - compatible : "via,vt8500-fb"
 - reg : Should contain 1 register ranges(address and length)
 - interrupts : framebuffer controller interrupt
-- display: a phandle pointing to the display node
+- bits-per-pixel : bit depth of framebuffer (16 or 32)
 
-Required nodes:
-- display: a display node is required to initialize the lcd panel
-        This should be in the board dts.
-- default-mode: a videomode within the display with timing parameters
-        as specified below.
+Required subnodes:
+- display-timings: see display-timing.txt for information
 
 Example:
 
-        fb@d800e400 {
+        fb@d8050800 {
                 compatible = "via,vt8500-fb";
                 reg = <0xd800e400 0x400>;
                 interrupts = <12>;
-                display = <&display>;
-                default-mode = <&mode0>;
-        };
-
-VIA VT8500 Display
------------------------------------------------------
-Required properties (as per of_videomode_helper):
-
- - hactive, vactive: Display resolution
- - hfront-porch, hback-porch, hsync-len: Horizontal Display timing parameters
-   in pixels
-   vfront-porch, vback-porch, vsync-len: Vertical display timing parameters in
-   lines
- - clock: displayclock in Hz
- - bpp: lcd panel bit-depth.
-        <16> for RGB565, <32> for RGB888
-
-Optional properties (as per of_videomode_helper):
- - width-mm, height-mm: Display dimensions in mm
- - hsync-active-high (bool): Hsync pulse is active high
- - vsync-active-high (bool): Vsync pulse is active high
- - interlaced (bool): This is an interlaced mode
- - doublescan (bool): This is a doublescan mode
+                bits-per-pixel = <16>;
 
-Example:
-        display: display@0 {
-                modes {
-                        mode0: mode@0 {
+                display-timings {
+                        native-mode = <&timing0>;
+                        timing0: 800x480 {
+                                clock-frequency = <0>; /* unused but required */
                                 hactive = <800>;
                                 vactive = <480>;
-                                hback-porch = <88>;
                                 hfront-porch = <40>;
+                                hback-porch = <88>;
                                 hsync-len = <0>;
                                 vback-porch = <32>;
                                 vfront-porch = <11>;
                                 vsync-len = <1>;
-                                clock = <0>;    /* unused but required */
-                                bpp = <16>;     /* non-standard but required */
                         };
                 };
         };
+
diff --git a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
index 3d325e1d11ee..0bcadb2840a5 100644
--- a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
+++ b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
@@ -4,20 +4,30 @@ Wondermedia WM8505 Framebuffer
 Required properties:
 - compatible : "wm,wm8505-fb"
 - reg : Should contain 1 register ranges(address and length)
-- via,display: a phandle pointing to the display node
+- bits-per-pixel : bit depth of framebuffer (16 or 32)
 
-Required nodes:
-- display: a display node is required to initialize the lcd panel
-        This should be in the board dts. See definition in
-        Documentation/devicetree/bindings/video/via,vt8500-fb.txt
-- default-mode: a videomode node as specified in
-        Documentation/devicetree/bindings/video/via,vt8500-fb.txt
+Required subnodes:
+- display-timings: see display-timing.txt for information
 
 Example:
 
-        fb@d8050800 {
+        fb@d8051700 {
                 compatible = "wm,wm8505-fb";
-                reg = <0xd8050800 0x200>;
-                display = <&display>;
-                default-mode = <&mode0>;
+                reg = <0xd8051700 0x200>;
+                bits-per-pixel = <16>;
+
+                display-timings {
+                        native-mode = <&timing0>;
+                        timing0: 800x480 {
+                                clock-frequency = <0>; /* unused but required */
+                                hactive = <800>;
+                                vactive = <480>;
+                                hfront-porch = <40>;
+                                hback-porch = <88>;
+                                hsync-len = <0>;
+                                vback-porch = <32>;
+                                vfront-porch = <11>;
+                                vsync-len = <1>;
+                        };
+                };
         };
diff --git a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt b/Documentation/devicetree/bindings/watchdog/sun4i-wdt.txt
index 0b2717775600..ecd650adff31 100644
--- a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/sun4i-wdt.txt
@@ -1,13 +1,13 @@
-Allwinner sunXi Watchdog timer
+Allwinner sun4i Watchdog timer
 
 Required properties:
 
-- compatible : should be "allwinner,sunxi-wdt"
+- compatible : should be "allwinner,sun4i-wdt"
 - reg : Specifies base physical address and size of the registers.
 
 Example:
 
 wdt: watchdog@01c20c90 {
-        compatible = "allwinner,sunxi-wdt";
+        compatible = "allwinner,sun4i-wdt";
         reg = <0x01c20c90 0x10>;
 };