aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/powerpc/4xx/ppc440spe-adma.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/powerpc/4xx/ppc440spe-adma.txt')
-rw-r--r--Documentation/devicetree/bindings/powerpc/4xx/ppc440spe-adma.txt93
1 files changed, 93 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/powerpc/4xx/ppc440spe-adma.txt b/Documentation/devicetree/bindings/powerpc/4xx/ppc440spe-adma.txt
new file mode 100644
index 000000000000..515ebcf1b97d
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/4xx/ppc440spe-adma.txt
@@ -0,0 +1,93 @@
1PPC440SPe DMA/XOR (DMA Controller and XOR Accelerator)
2
3Device nodes needed for operation of the ppc440spe-adma driver
4are specified hereby. These are I2O/DMA, DMA and XOR nodes
5for DMA engines and Memory Queue Module node. The latter is used
6by ADMA driver for configuration of RAID-6 H/W capabilities of
7the PPC440SPe. In addition to the nodes and properties described
8below, the ranges property of PLB node must specify ranges for
9DMA devices.
10
11 i) The I2O node
12
13 Required properties:
14
15 - compatible : "ibm,i2o-440spe";
16 - reg : <registers mapping>
17 - dcr-reg : <DCR registers range>
18
19 Example:
20
21 I2O: i2o@400100000 {
22 compatible = "ibm,i2o-440spe";
23 reg = <0x00000004 0x00100000 0x100>;
24 dcr-reg = <0x060 0x020>;
25 };
26
27
28 ii) The DMA node
29
30 Required properties:
31
32 - compatible : "ibm,dma-440spe";
33 - cell-index : 1 cell, hardware index of the DMA engine
34 (typically 0x0 and 0x1 for DMA0 and DMA1)
35 - reg : <registers mapping>
36 - dcr-reg : <DCR registers range>
37 - interrupts : <interrupt mapping for DMA0/1 interrupts sources:
38 2 sources: DMAx CS FIFO Needs Service IRQ (on UIC0)
39 and DMA Error IRQ (on UIC1). The latter is common
40 for both DMA engines>.
41 - interrupt-parent : needed for interrupt mapping
42
43 Example:
44
45 DMA0: dma0@400100100 {
46 compatible = "ibm,dma-440spe";
47 cell-index = <0>;
48 reg = <0x00000004 0x00100100 0x100>;
49 dcr-reg = <0x060 0x020>;
50 interrupt-parent = <&DMA0>;
51 interrupts = <0 1>;
52 #interrupt-cells = <1>;
53 #address-cells = <0>;
54 #size-cells = <0>;
55 interrupt-map = <
56 0 &UIC0 0x14 4
57 1 &UIC1 0x16 4>;
58 };
59
60
61 iii) XOR Accelerator node
62
63 Required properties:
64
65 - compatible : "amcc,xor-accelerator";
66 - reg : <registers mapping>
67 - interrupts : <interrupt mapping for XOR interrupt source>
68 - interrupt-parent : for interrupt mapping
69
70 Example:
71
72 xor-accel@400200000 {
73 compatible = "amcc,xor-accelerator";
74 reg = <0x00000004 0x00200000 0x400>;
75 interrupt-parent = <&UIC1>;
76 interrupts = <0x1f 4>;
77 };
78
79
80 iv) Memory Queue Module node
81
82 Required properties:
83
84 - compatible : "ibm,mq-440spe";
85 - dcr-reg : <DCR registers range>
86
87 Example:
88
89 MQ0: mq {
90 compatible = "ibm,mq-440spe";
91 dcr-reg = <0x040 0x020>;
92 };
93