aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/powerpc/4xx/emac.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/powerpc/4xx/emac.txt')
-rw-r--r--Documentation/devicetree/bindings/powerpc/4xx/emac.txt148
1 files changed, 148 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/powerpc/4xx/emac.txt b/Documentation/devicetree/bindings/powerpc/4xx/emac.txt
new file mode 100644
index 000000000000..2161334a7ca5
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/4xx/emac.txt
@@ -0,0 +1,148 @@
1 4xx/Axon EMAC ethernet nodes
2
3 The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
4 the Axon bridge. To operate this needs to interact with a ths
5 special McMAL DMA controller, and sometimes an RGMII or ZMII
6 interface. In addition to the nodes and properties described
7 below, the node for the OPB bus on which the EMAC sits must have a
8 correct clock-frequency property.
9
10 i) The EMAC node itself
11
12 Required properties:
13 - device_type : "network"
14
15 - compatible : compatible list, contains 2 entries, first is
16 "ibm,emac-CHIP" where CHIP is the host ASIC (440gx,
17 405gp, Axon) and second is either "ibm,emac" or
18 "ibm,emac4". For Axon, thus, we have: "ibm,emac-axon",
19 "ibm,emac4"
20 - interrupts : <interrupt mapping for EMAC IRQ and WOL IRQ>
21 - interrupt-parent : optional, if needed for interrupt mapping
22 - reg : <registers mapping>
23 - local-mac-address : 6 bytes, MAC address
24 - mal-device : phandle of the associated McMAL node
25 - mal-tx-channel : 1 cell, index of the tx channel on McMAL associated
26 with this EMAC
27 - mal-rx-channel : 1 cell, index of the rx channel on McMAL associated
28 with this EMAC
29 - cell-index : 1 cell, hardware index of the EMAC cell on a given
30 ASIC (typically 0x0 and 0x1 for EMAC0 and EMAC1 on
31 each Axon chip)
32 - max-frame-size : 1 cell, maximum frame size supported in bytes
33 - rx-fifo-size : 1 cell, Rx fifo size in bytes for 10 and 100 Mb/sec
34 operations.
35 For Axon, 2048
36 - tx-fifo-size : 1 cell, Tx fifo size in bytes for 10 and 100 Mb/sec
37 operations.
38 For Axon, 2048.
39 - fifo-entry-size : 1 cell, size of a fifo entry (used to calculate
40 thresholds).
41 For Axon, 0x00000010
42 - mal-burst-size : 1 cell, MAL burst size (used to calculate thresholds)
43 in bytes.
44 For Axon, 0x00000100 (I think ...)
45 - phy-mode : string, mode of operations of the PHY interface.
46 Supported values are: "mii", "rmii", "smii", "rgmii",
47 "tbi", "gmii", rtbi", "sgmii".
48 For Axon on CAB, it is "rgmii"
49 - mdio-device : 1 cell, required iff using shared MDIO registers
50 (440EP). phandle of the EMAC to use to drive the
51 MDIO lines for the PHY used by this EMAC.
52 - zmii-device : 1 cell, required iff connected to a ZMII. phandle of
53 the ZMII device node
54 - zmii-channel : 1 cell, required iff connected to a ZMII. Which ZMII
55 channel or 0xffffffff if ZMII is only used for MDIO.
56 - rgmii-device : 1 cell, required iff connected to an RGMII. phandle
57 of the RGMII device node.
58 For Axon: phandle of plb5/plb4/opb/rgmii
59 - rgmii-channel : 1 cell, required iff connected to an RGMII. Which
60 RGMII channel is used by this EMAC.
61 Fox Axon: present, whatever value is appropriate for each
62 EMAC, that is the content of the current (bogus) "phy-port"
63 property.
64
65 Optional properties:
66 - phy-address : 1 cell, optional, MDIO address of the PHY. If absent,
67 a search is performed.
68 - phy-map : 1 cell, optional, bitmap of addresses to probe the PHY
69 for, used if phy-address is absent. bit 0x00000001 is
70 MDIO address 0.
71 For Axon it can be absent, though my current driver
72 doesn't handle phy-address yet so for now, keep
73 0x00ffffff in it.
74 - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec
75 operations (if absent the value is the same as
76 rx-fifo-size). For Axon, either absent or 2048.
77 - tx-fifo-size-gige : 1 cell, Tx fifo size in bytes for 1000 Mb/sec
78 operations (if absent the value is the same as
79 tx-fifo-size). For Axon, either absent or 2048.
80 - tah-device : 1 cell, optional. If connected to a TAH engine for
81 offload, phandle of the TAH device node.
82 - tah-channel : 1 cell, optional. If appropriate, channel used on the
83 TAH engine.
84
85 Example:
86
87 EMAC0: ethernet@40000800 {
88 device_type = "network";
89 compatible = "ibm,emac-440gp", "ibm,emac";
90 interrupt-parent = <&UIC1>;
91 interrupts = <1c 4 1d 4>;
92 reg = <40000800 70>;
93 local-mac-address = [00 04 AC E3 1B 1E];
94 mal-device = <&MAL0>;
95 mal-tx-channel = <0 1>;
96 mal-rx-channel = <0>;
97 cell-index = <0>;
98 max-frame-size = <5dc>;
99 rx-fifo-size = <1000>;
100 tx-fifo-size = <800>;
101 phy-mode = "rmii";
102 phy-map = <00000001>;
103 zmii-device = <&ZMII0>;
104 zmii-channel = <0>;
105 };
106
107 ii) McMAL node
108
109 Required properties:
110 - device_type : "dma-controller"
111 - compatible : compatible list, containing 2 entries, first is
112 "ibm,mcmal-CHIP" where CHIP is the host ASIC (like
113 emac) and the second is either "ibm,mcmal" or
114 "ibm,mcmal2".
115 For Axon, "ibm,mcmal-axon","ibm,mcmal2"
116 - interrupts : <interrupt mapping for the MAL interrupts sources:
117 5 sources: tx_eob, rx_eob, serr, txde, rxde>.
118 For Axon: This is _different_ from the current
119 firmware. We use the "delayed" interrupts for txeob
120 and rxeob. Thus we end up with mapping those 5 MPIC
121 interrupts, all level positive sensitive: 10, 11, 32,
122 33, 34 (in decimal)
123 - dcr-reg : < DCR registers range >
124 - dcr-parent : if needed for dcr-reg
125 - num-tx-chans : 1 cell, number of Tx channels
126 - num-rx-chans : 1 cell, number of Rx channels
127
128 iii) ZMII node
129
130 Required properties:
131 - compatible : compatible list, containing 2 entries, first is
132 "ibm,zmii-CHIP" where CHIP is the host ASIC (like
133 EMAC) and the second is "ibm,zmii".
134 For Axon, there is no ZMII node.
135 - reg : <registers mapping>
136
137 iv) RGMII node
138
139 Required properties:
140 - compatible : compatible list, containing 2 entries, first is
141 "ibm,rgmii-CHIP" where CHIP is the host ASIC (like
142 EMAC) and the second is "ibm,rgmii".
143 For Axon, "ibm,rgmii-axon","ibm,rgmii"
144 - reg : <registers mapping>
145 - revision : as provided by the RGMII new version register if
146 available.
147 For Axon: 0x0000012a
148