diff options
Diffstat (limited to 'Documentation/devicetree/bindings/dma/img-mdc-dma.txt')
-rw-r--r-- | Documentation/devicetree/bindings/dma/img-mdc-dma.txt | 57 |
1 files changed, 57 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/dma/img-mdc-dma.txt b/Documentation/devicetree/bindings/dma/img-mdc-dma.txt new file mode 100644 index 000000000000..28c1341db346 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/img-mdc-dma.txt | |||
@@ -0,0 +1,57 @@ | |||
1 | * IMG Multi-threaded DMA Controller (MDC) | ||
2 | |||
3 | Required properties: | ||
4 | - compatible: Must be "img,pistachio-mdc-dma". | ||
5 | - reg: Must contain the base address and length of the MDC registers. | ||
6 | - interrupts: Must contain all the per-channel DMA interrupts. | ||
7 | - clocks: Must contain an entry for each entry in clock-names. | ||
8 | See ../clock/clock-bindings.txt for details. | ||
9 | - clock-names: Must include the following entries: | ||
10 | - sys: MDC system interface clock. | ||
11 | - img,cr-periph: Must contain a phandle to the peripheral control syscon | ||
12 | node which contains the DMA request to channel mapping registers. | ||
13 | - img,max-burst-multiplier: Must be the maximum supported burst size multiplier. | ||
14 | The maximum burst size is this value multiplied by the hardware-reported bus | ||
15 | width. | ||
16 | - #dma-cells: Must be 3: | ||
17 | - The first cell is the peripheral's DMA request line. | ||
18 | - The second cell is a bitmap specifying to which channels the DMA request | ||
19 | line may be mapped (i.e. bit N set indicates channel N is usable). | ||
20 | - The third cell is the thread ID to be used by the channel. | ||
21 | |||
22 | Optional properties: | ||
23 | - dma-channels: Number of supported DMA channels, up to 32. If not specified | ||
24 | the number reported by the hardware is used. | ||
25 | |||
26 | Example: | ||
27 | |||
28 | mdc: dma-controller@18143000 { | ||
29 | compatible = "img,pistachio-mdc-dma"; | ||
30 | reg = <0x18143000 0x1000>; | ||
31 | interrupts = <GIC_SHARED 27 IRQ_TYPE_LEVEL_HIGH>, | ||
32 | <GIC_SHARED 28 IRQ_TYPE_LEVEL_HIGH>, | ||
33 | <GIC_SHARED 29 IRQ_TYPE_LEVEL_HIGH>, | ||
34 | <GIC_SHARED 30 IRQ_TYPE_LEVEL_HIGH>, | ||
35 | <GIC_SHARED 31 IRQ_TYPE_LEVEL_HIGH>, | ||
36 | <GIC_SHARED 32 IRQ_TYPE_LEVEL_HIGH>, | ||
37 | <GIC_SHARED 33 IRQ_TYPE_LEVEL_HIGH>, | ||
38 | <GIC_SHARED 34 IRQ_TYPE_LEVEL_HIGH>, | ||
39 | <GIC_SHARED 35 IRQ_TYPE_LEVEL_HIGH>, | ||
40 | <GIC_SHARED 36 IRQ_TYPE_LEVEL_HIGH>, | ||
41 | <GIC_SHARED 37 IRQ_TYPE_LEVEL_HIGH>, | ||
42 | <GIC_SHARED 38 IRQ_TYPE_LEVEL_HIGH>; | ||
43 | clocks = <&system_clk>; | ||
44 | clock-names = "sys"; | ||
45 | |||
46 | img,max-burst-multiplier = <16>; | ||
47 | img,cr-periph = <&cr_periph>; | ||
48 | |||
49 | #dma-cells = <3>; | ||
50 | }; | ||
51 | |||
52 | spi@18100f00 { | ||
53 | ... | ||
54 | dmas = <&mdc 9 0xffffffff 0>, <&mdc 10 0xffffffff 0>; | ||
55 | dma-names = "tx", "rx"; | ||
56 | ... | ||
57 | }; | ||