aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/mach-kirkwood/Kconfig14
-rw-r--r--arch/arm/mach-kirkwood/Makefile2
-rw-r--r--arch/arm/mach-kirkwood/sheevaplug-setup.c161
3 files changed, 0 insertions, 177 deletions
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 4bf2737e6cee..329c9ce4f959 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -12,13 +12,6 @@ config MACH_D2NET_V2
12 Say 'Y' here if you want your kernel to support the 12 Say 'Y' here if you want your kernel to support the
13 LaCie d2 Network v2 NAS. 13 LaCie d2 Network v2 NAS.
14 14
15config MACH_ESATA_SHEEVAPLUG
16 bool "Marvell eSATA SheevaPlug Reference Board"
17 select KIRKWOOD_LEGACY
18 help
19 Say 'Y' here if you want your kernel to support the
20 Marvell eSATA SheevaPlug Reference Board.
21
22config MACH_INETSPACE_V2 15config MACH_INETSPACE_V2
23 bool "LaCie Internet Space v2 NAS Board" 16 bool "LaCie Internet Space v2 NAS Board"
24 select KIRKWOOD_LEGACY 17 select KIRKWOOD_LEGACY
@@ -100,13 +93,6 @@ config MACH_RD88F6281
100 Say 'Y' here if you want your kernel to support the 93 Say 'Y' here if you want your kernel to support the
101 Marvell RD-88F6281 Reference Board. 94 Marvell RD-88F6281 Reference Board.
102 95
103config MACH_SHEEVAPLUG
104 bool "Marvell SheevaPlug Reference Board"
105 select KIRKWOOD_LEGACY
106 help
107 Say 'Y' here if you want your kernel to support the
108 Marvell SheevaPlug Reference Board.
109
110config MACH_T5325 96config MACH_T5325
111 bool "HP t5325 Thin Client" 97 bool "HP t5325 Thin Client"
112 select KIRKWOOD_LEGACY 98 select KIRKWOOD_LEGACY
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 3c748ea1585b..4bd5602d1932 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -1,7 +1,6 @@
1obj-y += common.o pcie.o 1obj-y += common.o pcie.o
2obj-$(CONFIG_KIRKWOOD_LEGACY) += irq.o mpp.o 2obj-$(CONFIG_KIRKWOOD_LEGACY) += irq.o mpp.o
3obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o 3obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o
4obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o
5obj-$(CONFIG_MACH_INETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o 4obj-$(CONFIG_MACH_INETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o
6obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o 5obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o
7obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o 6obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
@@ -11,7 +10,6 @@ obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o
11obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o 10obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o
12obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o 11obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o
13obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o 12obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
14obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
15obj-$(CONFIG_MACH_T5325) += t5325-setup.o 13obj-$(CONFIG_MACH_T5325) += t5325-setup.o
16obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o 14obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
17obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o 15obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
deleted file mode 100644
index 55b68fa39f45..000000000000
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ /dev/null
@@ -1,161 +0,0 @@
1/*
2 * arch/arm/mach-kirkwood/sheevaplug-setup.c
3 *
4 * Marvell SheevaPlug Reference Board Setup
5 *
6 * This file is licensed under the terms of the GNU General Public
7 * License version 2. This program is licensed "as is" without any
8 * warranty of any kind, whether express or implied.
9 */
10
11#include <linux/kernel.h>
12#include <linux/init.h>
13#include <linux/platform_device.h>
14#include <linux/ata_platform.h>
15#include <linux/mtd/partitions.h>
16#include <linux/mv643xx_eth.h>
17#include <linux/gpio.h>
18#include <linux/leds.h>
19#include <asm/mach-types.h>
20#include <asm/mach/arch.h>
21#include <mach/kirkwood.h>
22#include <linux/platform_data/mmc-mvsdio.h>
23#include "common.h"
24#include "mpp.h"
25
26static struct mtd_partition sheevaplug_nand_parts[] = {
27 {
28 .name = "u-boot",
29 .offset = 0,
30 .size = SZ_1M
31 }, {
32 .name = "uImage",
33 .offset = MTDPART_OFS_NXTBLK,
34 .size = SZ_4M
35 }, {
36 .name = "root",
37 .offset = MTDPART_OFS_NXTBLK,
38 .size = MTDPART_SIZ_FULL
39 },
40};
41
42static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
43 .phy_addr = MV643XX_ETH_PHY_ADDR(0),
44};
45
46static struct mv_sata_platform_data sheeva_esata_sata_data = {
47 .n_ports = 2,
48};
49
50static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
51 /* unfortunately the CD signal has not been connected */
52};
53
54static struct mvsdio_platform_data sheeva_esata_mvsdio_data = {
55 .gpio_write_protect = 44, /* MPP44 used as SD write protect */
56 .gpio_card_detect = 47, /* MPP47 used as SD card detect */
57};
58
59static struct gpio_led sheevaplug_led_pins[] = {
60 {
61 .name = "plug:red:misc",
62 .default_trigger = "none",
63 .gpio = 46,
64 .active_low = 1,
65 },
66 {
67 .name = "plug:green:health",
68 .default_trigger = "default-on",
69 .gpio = 49,
70 .active_low = 1,
71 },
72};
73
74static struct gpio_led_platform_data sheevaplug_led_data = {
75 .leds = sheevaplug_led_pins,
76 .num_leds = ARRAY_SIZE(sheevaplug_led_pins),
77};
78
79static struct platform_device sheevaplug_leds = {
80 .name = "leds-gpio",
81 .id = -1,
82 .dev = {
83 .platform_data = &sheevaplug_led_data,
84 }
85};
86
87static unsigned int sheevaplug_mpp_config[] __initdata = {
88 MPP29_GPIO, /* USB Power Enable */
89 MPP46_GPIO, /* LED Red */
90 MPP49_GPIO, /* LED */
91 0
92};
93
94static unsigned int sheeva_esata_mpp_config[] __initdata = {
95 MPP29_GPIO, /* USB Power Enable */
96 MPP44_GPIO, /* SD Write Protect */
97 MPP47_GPIO, /* SD Card Detect */
98 MPP49_GPIO, /* LED Green */
99 0
100};
101
102static void __init sheevaplug_init(void)
103{
104 /*
105 * Basic setup. Needs to be called early.
106 */
107 kirkwood_init();
108
109 /* setup gpio pin select */
110 if (machine_is_esata_sheevaplug())
111 kirkwood_mpp_conf(sheeva_esata_mpp_config);
112 else
113 kirkwood_mpp_conf(sheevaplug_mpp_config);
114
115 kirkwood_uart0_init();
116 kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25);
117
118 if (gpio_request(29, "USB Power Enable") != 0 ||
119 gpio_direction_output(29, 1) != 0)
120 pr_err("can't set up GPIO 29 (USB Power Enable)\n");
121 kirkwood_ehci_init();
122
123 kirkwood_ge00_init(&sheevaplug_ge00_data);
124
125 /* honor lower power consumption for plugs with out eSATA */
126 if (machine_is_esata_sheevaplug())
127 kirkwood_sata_init(&sheeva_esata_sata_data);
128
129 /* enable sd wp and sd cd on plugs with esata */
130 if (machine_is_esata_sheevaplug())
131 kirkwood_sdio_init(&sheeva_esata_mvsdio_data);
132 else
133 kirkwood_sdio_init(&sheevaplug_mvsdio_data);
134
135 platform_device_register(&sheevaplug_leds);
136}
137
138#ifdef CONFIG_MACH_SHEEVAPLUG
139MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
140 /* Maintainer: shadi Ammouri <shadi@marvell.com> */
141 .atag_offset = 0x100,
142 .init_machine = sheevaplug_init,
143 .map_io = kirkwood_map_io,
144 .init_early = kirkwood_init_early,
145 .init_irq = kirkwood_init_irq,
146 .init_time = kirkwood_timer_init,
147 .restart = kirkwood_restart,
148MACHINE_END
149#endif
150
151#ifdef CONFIG_MACH_ESATA_SHEEVAPLUG
152MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
153 .atag_offset = 0x100,
154 .init_machine = sheevaplug_init,
155 .map_io = kirkwood_map_io,
156 .init_early = kirkwood_init_early,
157 .init_irq = kirkwood_init_irq,
158 .init_time = kirkwood_timer_init,
159 .restart = kirkwood_restart,
160MACHINE_END
161#endif
generated by cgit v1.2.2 (git 2.25.0) at 2025-06-09 09:44:36 -0400