8 files changed, 799 insertions, 7 deletions

diff --git a/Documentation/leds/00-INDEX b/Documentation/leds/00-INDEX
index 5246090ef15c..1ecd1596633e 100644
--- a/Documentation/leds/00-INDEX
+++ b/Documentation/leds/00-INDEX
@@ -6,6 +6,8 @@ leds-lp5521.txt
         - notes on how to use the leds-lp5521 driver.
 leds-lp5523.txt
         - notes on how to use the leds-lp5523 driver.
+leds-lp5562.txt
+        - notes on how to use the leds-lp5562 driver.
 leds-lp55xx.txt
         - description about lp55xx common driver.
 leds-lm3556.txt
diff --git a/Documentation/leds/leds-lp5562.txt b/Documentation/leds/leds-lp5562.txt
new file mode 100644
index 000000000000..96061000dd93
--- /dev/null
+++ b/Documentation/leds/leds-lp5562.txt
@@ -0,0 +1,135 @@
+Kernel driver for LP5562
+========================
+
+* TI LP5562 LED Driver
+
+Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+
+Description
+
+  LP5562 can drive up to 4 channels. R/G/B and White.
+  LEDs can be controlled directly via the led class control interface.
+
+  All four channels can be also controlled using the engine micro programs.
+  LP5562 has the internal program memory for running various LED patterns.
+  For the details, please refer to 'firmware' section in leds-lp55xx.txt
+
+Device attribute: engine_mux
+
+  3 Engines are allocated in LP5562, but the number of channel is 4.
+  Therefore each channel should be mapped to the engine number.
+  Value : RGB or W
+
+  This attribute is used for programming LED data with the firmware interface.
+  Unlike the LP5521/LP5523/55231, LP5562 has unique feature for the engine mux,
+  so additional sysfs is required.
+
+  LED Map
+  Red   ... Engine 1 (fixed)
+  Green ... Engine 2 (fixed)
+  Blue  ... Engine 3 (fixed)
+  White ... Engine 1 or 2 or 3 (selective)
+
+How to load the program data using engine_mux
+
+  Before loading the LP5562 program data, engine_mux should be written between
+  the engine selection and loading the firmware.
+  Engine mux has two different mode, RGB and W.
+  RGB is used for loading RGB program data, W is used for W program data.
+
+  For example, run blinking green channel pattern,
+  echo 2 > /sys/bus/i2c/devices/xxxx/select_engine     # 2 is for green channel
+  echo "RGB" > /sys/bus/i2c/devices/xxxx/engine_mux    # engine mux for RGB
+  echo 1 > /sys/class/firmware/lp5562/loading
+  echo "4000600040FF6000" > /sys/class/firmware/lp5562/data
+  echo 0 > /sys/class/firmware/lp5562/loading
+  echo 1 > /sys/bus/i2c/devices/xxxx/run_engine
+
+  To run a blinking white pattern,
+  echo 1 or 2 or 3 > /sys/bus/i2c/devices/xxxx/select_engine
+  echo "W" > /sys/bus/i2c/devices/xxxx/engine_mux
+  echo 1 > /sys/class/firmware/lp5562/loading
+  echo "4000600040FF6000" > /sys/class/firmware/lp5562/data
+  echo 0 > /sys/class/firmware/lp5562/loading
+  echo 1 > /sys/bus/i2c/devices/xxxx/run_engine
+
+How to load the predefined patterns
+
+  Please refer to 'leds-lp55xx.txt"
+
+Setting Current of Each Channel
+
+  Like LP5521 and LP5523/55231, LP5562 provides LED current settings.
+  The 'led_current' and 'max_current' are used.
+
+(Example of Platform data)
+
+To configure the platform specific data, lp55xx_platform_data structure is used.
+
+static struct lp55xx_led_config lp5562_led_config[] = {
+        {
+                .name           = "R",
+                .chan_nr        = 0,
+                .led_current    = 20,
+                .max_current    = 40,
+        },
+        {
+                .name           = "G",
+                .chan_nr        = 1,
+                .led_current    = 20,
+                .max_current    = 40,
+        },
+        {
+                .name           = "B",
+                .chan_nr        = 2,
+                .led_current    = 20,
+                .max_current    = 40,
+        },
+        {
+                .name           = "W",
+                .chan_nr        = 3,
+                .led_current    = 20,
+                .max_current    = 40,
+        },
+};
+
+static int lp5562_setup(void)
+{
+        /* setup HW resources */
+}
+
+static void lp5562_release(void)
+{
+        /* Release HW resources */
+}
+
+static void lp5562_enable(bool state)
+{
+        /* Control of chip enable signal */
+}
+
+static struct lp55xx_platform_data lp5562_platform_data = {
+        .led_config     = lp5562_led_config,
+        .num_channels   = ARRAY_SIZE(lp5562_led_config),
+        .setup_resources   = lp5562_setup,
+        .release_resources = lp5562_release,
+        .enable            = lp5562_enable,
+};
+
+If the current is set to 0 in the platform data, that channel is
+disabled and it is not visible in the sysfs.
+
+The 'update_config' : CONFIG register (ADDR 08h)
+This value is platform-specific data.
+If update_config is not defined, the CONFIG register is set with
+'LP5562_PWRSAVE_EN | LP5562_CLK_AUTO'.
+(Enable auto-powersave, set automatic clock source selection)
+
+#define LP5562_CONFIGS  (LP5562_PWM_HF | LP5562_PWRSAVE_EN | \
+                         LP5562_CLK_SRC_EXT)
+
+static struct lp55xx_platform_data lp5562_pdata = {
+        .led_config = lp5562_led_config,
+        .num_channels = ARRAY_SIZE(lp5562_led_config),
+        .update_config = LP5562_CONFIGS,
+};
diff --git a/Documentation/leds/leds-lp55xx.txt b/Documentation/leds/leds-lp55xx.txt
index ced41868d2d1..eec8fa2ffe4e 100644
--- a/Documentation/leds/leds-lp55xx.txt
+++ b/Documentation/leds/leds-lp55xx.txt
@@ -5,7 +5,7 @@ Authors: Milo(Woogyom) Kim <milo.kim@ti.com>
 
 Description
 -----------
-LP5521, LP5523/55231 have common features as below.
+LP5521, LP5523/55231 and LP5562 have common features as below.
 
   Register access via the I2C
   Device initialization/deinitialization
@@ -116,3 +116,47 @@ To support this, 'run_engine' and 'firmware_cb' are configurable in each driver.
 run_engine  : Control the selected engine
 firmware_cb : The callback function after loading the firmware is done.
               Chip specific commands for loading and updating program memory.
+
+( Predefined pattern data )
+
+Without the firmware interface, LP55xx driver provides another method for
+loading a LED pattern. That is 'predefined' pattern.
+A predefined pattern is defined in the platform data and load it(or them)
+via the sysfs if needed.
+To use the predefined pattern concept, 'patterns' and 'num_patterns' should be
+configured.
+
+  Example of predefined pattern data:
+
+  /* mode_1: blinking data */
+  static const u8 mode_1[] = {
+                0x40, 0x00, 0x60, 0x00, 0x40, 0xFF, 0x60, 0x00,
+                };
+
+  /* mode_2: always on */
+  static const u8 mode_2[] = { 0x40, 0xFF, };
+
+  struct lp55xx_predef_pattern board_led_patterns[] = {
+        {
+                .r = mode_1,
+                .size_r = ARRAY_SIZE(mode_1),
+        },
+        {
+                .b = mode_2,
+                .size_b = ARRAY_SIZE(mode_2),
+        },
+  }
+
+  struct lp55xx_platform_data lp5562_pdata = {
+  ...
+        .patterns      = board_led_patterns,
+        .num_patterns  = ARRAY_SIZE(board_led_patterns),
+  };
+
+Then, mode_1 and mode_2 can be run via through the sysfs.
+
+  echo 1 > /sys/bus/i2c/devices/xxxx/led_pattern    # red blinking LED pattern
+  echo 2 > /sys/bus/i2c/devices/xxxx/led_pattern    # blue LED always on
+
+To stop running pattern,
+  echo 0 > /sys/bus/i2c/devices/xxxx/led_pattern
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index ec50824c02ec..c7f755034375 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -194,8 +194,8 @@ config LEDS_LP3944
           module will be called leds-lp3944.
 
 config LEDS_LP55XX_COMMON
-        tristate "Common Driver for TI/National LP5521 and LP5523/55231"
-        depends on LEDS_LP5521 || LEDS_LP5523
+        tristate "Common Driver for TI/National LP5521, LP5523/55231 and LP5562"
+        depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562
         select FW_LOADER
         help
           This option supports common operations for LP5521 and LP5523/55231
@@ -222,6 +222,16 @@ config LEDS_LP5523
           Driver provides direct control via LED class and interface for
           programming the engines.
 
+config LEDS_LP5562
+        tristate "LED Support for TI LP5562 LED driver chip"
+        depends on LEDS_CLASS && I2C
+        select LEDS_LP55XX_COMMON
+        help
+          If you say yes here you get support for TI LP5562 LED driver.
+          It is 4 channels chip with programmable engines.
+          Driver provides direct control via LED class and interface for
+          programming the engines.
+
 config LEDS_LP8788
         tristate "LED support for the TI LP8788 PMIC"
         depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 215e7e3b6173..ab8f5c549ad3 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_LEDS_LP3944)		+= leds-lp3944.o
 obj-$(CONFIG_LEDS_LP55XX_COMMON)        += leds-lp55xx-common.o
 obj-$(CONFIG_LEDS_LP5521)               += leds-lp5521.o
 obj-$(CONFIG_LEDS_LP5523)               += leds-lp5523.o
+obj-$(CONFIG_LEDS_LP5562)               += leds-lp5562.o
 obj-$(CONFIG_LEDS_LP8788)               += leds-lp8788.o
 obj-$(CONFIG_LEDS_TCA6507)              += leds-tca6507.o
 obj-$(CONFIG_LEDS_CLEVO_MAIL)           += leds-clevo-mail.o
diff --git a/drivers/leds/leds-lp5562.c b/drivers/leds/leds-lp5562.c
new file mode 100644
index 000000000000..f8b927788c3a
--- /dev/null
+++ b/drivers/leds/leds-lp5562.c
@@ -0,0 +1,593 @@
+/*
+ * LP5562 LED driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ *
+ * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_data/leds-lp55xx.h>
+#include <linux/slab.h>
+
+#include "leds-lp55xx-common.h"
+
+#define LP5562_PROGRAM_LENGTH           32
+#define LP5562_MAX_LEDS                 4
+
+/* ENABLE Register 00h */
+#define LP5562_REG_ENABLE               0x00
+#define LP5562_EXEC_ENG1_M              0x30
+#define LP5562_EXEC_ENG2_M              0x0C
+#define LP5562_EXEC_ENG3_M              0x03
+#define LP5562_EXEC_M                   0x3F
+#define LP5562_MASTER_ENABLE            0x40    /* Chip master enable */
+#define LP5562_LOGARITHMIC_PWM          0x80    /* Logarithmic PWM adjustment */
+#define LP5562_EXEC_RUN                 0x2A
+#define LP5562_ENABLE_DEFAULT   \
+        (LP5562_MASTER_ENABLE | LP5562_LOGARITHMIC_PWM)
+#define LP5562_ENABLE_RUN_PROGRAM       \
+        (LP5562_ENABLE_DEFAULT | LP5562_EXEC_RUN)
+
+/* OPMODE Register 01h */
+#define LP5562_REG_OP_MODE              0x01
+#define LP5562_MODE_ENG1_M              0x30
+#define LP5562_MODE_ENG2_M              0x0C
+#define LP5562_MODE_ENG3_M              0x03
+#define LP5562_LOAD_ENG1                0x10
+#define LP5562_LOAD_ENG2                0x04
+#define LP5562_LOAD_ENG3                0x01
+#define LP5562_RUN_ENG1                 0x20
+#define LP5562_RUN_ENG2                 0x08
+#define LP5562_RUN_ENG3                 0x02
+#define LP5562_ENG1_IS_LOADING(mode)    \
+        ((mode & LP5562_MODE_ENG1_M) == LP5562_LOAD_ENG1)
+#define LP5562_ENG2_IS_LOADING(mode)    \
+        ((mode & LP5562_MODE_ENG2_M) == LP5562_LOAD_ENG2)
+#define LP5562_ENG3_IS_LOADING(mode)    \
+        ((mode & LP5562_MODE_ENG3_M) == LP5562_LOAD_ENG3)
+
+/* BRIGHTNESS Registers */
+#define LP5562_REG_R_PWM                0x04
+#define LP5562_REG_G_PWM                0x03
+#define LP5562_REG_B_PWM                0x02
+#define LP5562_REG_W_PWM                0x0E
+
+/* CURRENT Registers */
+#define LP5562_REG_R_CURRENT            0x07
+#define LP5562_REG_G_CURRENT            0x06
+#define LP5562_REG_B_CURRENT            0x05
+#define LP5562_REG_W_CURRENT            0x0F
+
+/* CONFIG Register 08h */
+#define LP5562_REG_CONFIG               0x08
+#define LP5562_DEFAULT_CFG      \
+        (LP5562_PWM_HF | LP5562_PWRSAVE_EN | LP5562_CLK_INT)
+
+/* RESET Register 0Dh */
+#define LP5562_REG_RESET                0x0D
+#define LP5562_RESET                    0xFF
+
+/* PROGRAM ENGINE Registers */
+#define LP5562_REG_PROG_MEM_ENG1        0x10
+#define LP5562_REG_PROG_MEM_ENG2        0x30
+#define LP5562_REG_PROG_MEM_ENG3        0x50
+
+/* LEDMAP Register 70h */
+#define LP5562_REG_ENG_SEL              0x70
+#define LP5562_ENG_SEL_PWM              0
+#define LP5562_ENG_FOR_RGB_M            0x3F
+#define LP5562_ENG_SEL_RGB              0x1B    /* R:ENG1, G:ENG2, B:ENG3 */
+#define LP5562_ENG_FOR_W_M              0xC0
+#define LP5562_ENG1_FOR_W               0x40    /* W:ENG1 */
+#define LP5562_ENG2_FOR_W               0x80    /* W:ENG2 */
+#define LP5562_ENG3_FOR_W               0xC0    /* W:ENG3 */
+
+/* Program Commands */
+#define LP5562_CMD_DISABLE              0x00
+#define LP5562_CMD_LOAD                 0x15
+#define LP5562_CMD_RUN                  0x2A
+#define LP5562_CMD_DIRECT               0x3F
+#define LP5562_PATTERN_OFF              0
+
+static inline void lp5562_wait_opmode_done(void)
+{
+        /* operation mode change needs to be longer than 153 us */
+        usleep_range(200, 300);
+}
+
+static inline void lp5562_wait_enable_done(void)
+{
+        /* it takes more 488 us to update ENABLE register */
+        usleep_range(500, 600);
+}
+
+static void lp5562_set_led_current(struct lp55xx_led *led, u8 led_current)
+{
+        u8 addr[] = {
+                LP5562_REG_R_CURRENT,
+                LP5562_REG_G_CURRENT,
+                LP5562_REG_B_CURRENT,
+                LP5562_REG_W_CURRENT,
+        };
+
+        led->led_current = led_current;
+        lp55xx_write(led->chip, addr[led->chan_nr], led_current);
+}
+
+static void lp5562_load_engine(struct lp55xx_chip *chip)
+{
+        enum lp55xx_engine_index idx = chip->engine_idx;
+        u8 mask[] = {
+                [LP55XX_ENGINE_1] = LP5562_MODE_ENG1_M,
+                [LP55XX_ENGINE_2] = LP5562_MODE_ENG2_M,
+                [LP55XX_ENGINE_3] = LP5562_MODE_ENG3_M,
+        };
+
+        u8 val[] = {
+                [LP55XX_ENGINE_1] = LP5562_LOAD_ENG1,
+                [LP55XX_ENGINE_2] = LP5562_LOAD_ENG2,
+                [LP55XX_ENGINE_3] = LP5562_LOAD_ENG3,
+        };
+
+        lp55xx_update_bits(chip, LP5562_REG_OP_MODE, mask[idx], val[idx]);
+
+        lp5562_wait_opmode_done();
+}
+
+static void lp5562_stop_engine(struct lp55xx_chip *chip)
+{
+        lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DISABLE);
+        lp5562_wait_opmode_done();
+}
+
+static void lp5562_run_engine(struct lp55xx_chip *chip, bool start)
+{
+        int ret;
+        u8 mode;
+        u8 exec;
+
+        /* stop engine */
+        if (!start) {
+                lp55xx_write(chip, LP5562_REG_ENABLE, LP5562_ENABLE_DEFAULT);
+                lp5562_wait_enable_done();
+                lp5562_stop_engine(chip);
+                lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM);
+                lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT);
+                lp5562_wait_opmode_done();
+                return;
+        }
+
+        /*
+         * To run the engine,
+         * operation mode and enable register should updated at the same time
+         */
+
+        ret = lp55xx_read(chip, LP5562_REG_OP_MODE, &mode);
+        if (ret)
+                return;
+
+        ret = lp55xx_read(chip, LP5562_REG_ENABLE, &exec);
+        if (ret)
+                return;
+
+        /* change operation mode to RUN only when each engine is loading */
+        if (LP5562_ENG1_IS_LOADING(mode)) {
+                mode = (mode & ~LP5562_MODE_ENG1_M) | LP5562_RUN_ENG1;
+                exec = (exec & ~LP5562_EXEC_ENG1_M) | LP5562_RUN_ENG1;
+        }
+
+        if (LP5562_ENG2_IS_LOADING(mode)) {
+                mode = (mode & ~LP5562_MODE_ENG2_M) | LP5562_RUN_ENG2;
+                exec = (exec & ~LP5562_EXEC_ENG2_M) | LP5562_RUN_ENG2;
+        }
+
+        if (LP5562_ENG3_IS_LOADING(mode)) {
+                mode = (mode & ~LP5562_MODE_ENG3_M) | LP5562_RUN_ENG3;
+                exec = (exec & ~LP5562_EXEC_ENG3_M) | LP5562_RUN_ENG3;
+        }
+
+        lp55xx_write(chip, LP5562_REG_OP_MODE, mode);
+        lp5562_wait_opmode_done();
+
+        lp55xx_update_bits(chip, LP5562_REG_ENABLE, LP5562_EXEC_M, exec);
+        lp5562_wait_enable_done();
+}
+
+static int lp5562_update_firmware(struct lp55xx_chip *chip,
+                                        const u8 *data, size_t size)
+{
+        enum lp55xx_engine_index idx = chip->engine_idx;
+        u8 pattern[LP5562_PROGRAM_LENGTH] = {0};
+        u8 addr[] = {
+                [LP55XX_ENGINE_1] = LP5562_REG_PROG_MEM_ENG1,
+                [LP55XX_ENGINE_2] = LP5562_REG_PROG_MEM_ENG2,
+                [LP55XX_ENGINE_3] = LP5562_REG_PROG_MEM_ENG3,
+        };
+        unsigned cmd;
+        char c[3];
+        int program_size;
+        int nrchars;
+        int offset = 0;
+        int ret;
+        int i;
+
+        /* clear program memory before updating */
+        for (i = 0; i < LP5562_PROGRAM_LENGTH; i++)
+                lp55xx_write(chip, addr[idx] + i, 0);
+
+        i = 0;
+        while ((offset < size - 1) && (i < LP5562_PROGRAM_LENGTH)) {
+                /* separate sscanfs because length is working only for %s */
+                ret = sscanf(data + offset, "%2s%n ", c, &nrchars);
+                if (ret != 1)
+                        goto err;
+
+                ret = sscanf(c, "%2x", &cmd);
+                if (ret != 1)
+                        goto err;
+
+                pattern[i] = (u8)cmd;
+                offset += nrchars;
+                i++;
+        }
+
+        /* Each instruction is 16bit long. Check that length is even */
+        if (i % 2)
+                goto err;
+
+        program_size = i;
+        for (i = 0; i < program_size; i++)
+                lp55xx_write(chip, addr[idx] + i, pattern[i]);
+
+        return 0;
+
+err:
+        dev_err(&chip->cl->dev, "wrong pattern format\n");
+        return -EINVAL;
+}
+
+static void lp5562_firmware_loaded(struct lp55xx_chip *chip)
+{
+        const struct firmware *fw = chip->fw;
+
+        if (fw->size > LP5562_PROGRAM_LENGTH) {
+                dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n",
+                        fw->size);
+                return;
+        }
+
+        /*
+         * Program momery sequence
+         *  1) set engine mode to "LOAD"
+         *  2) write firmware data into program memory
+         */
+
+        lp5562_load_engine(chip);
+        lp5562_update_firmware(chip, fw->data, fw->size);
+}
+
+static int lp5562_post_init_device(struct lp55xx_chip *chip)
+{
+        int ret;
+        u8 update_cfg = chip->pdata->update_config ? : LP5562_DEFAULT_CFG;
+
+        /* Set all PWMs to direct control mode */
+        ret = lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT);
+        if (ret)
+                return ret;
+
+        lp5562_wait_opmode_done();
+
+        ret = lp55xx_write(chip, LP5562_REG_CONFIG, update_cfg);
+        if (ret)
+                return ret;
+
+        /* Initialize all channels PWM to zero -> leds off */
+        lp55xx_write(chip, LP5562_REG_R_PWM, 0);
+        lp55xx_write(chip, LP5562_REG_G_PWM, 0);
+        lp55xx_write(chip, LP5562_REG_B_PWM, 0);
+        lp55xx_write(chip, LP5562_REG_W_PWM, 0);
+
+        /* Set LED map as register PWM by default */
+        lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM);
+
+        return 0;
+}
+
+static void lp5562_led_brightness_work(struct work_struct *work)
+{
+        struct lp55xx_led *led = container_of(work, struct lp55xx_led,
+                                              brightness_work);
+        struct lp55xx_chip *chip = led->chip;
+        u8 addr[] = {
+                LP5562_REG_R_PWM,
+                LP5562_REG_G_PWM,
+                LP5562_REG_B_PWM,
+                LP5562_REG_W_PWM,
+        };
+
+        mutex_lock(&chip->lock);
+        lp55xx_write(chip, addr[led->chan_nr], led->brightness);
+        mutex_unlock(&chip->lock);
+}
+
+static void lp5562_write_program_memory(struct lp55xx_chip *chip,
+                                        u8 base, const u8 *rgb, int size)
+{
+        int i;
+
+        if (!rgb || size <= 0)
+                return;
+
+        for (i = 0; i < size; i++)
+                lp55xx_write(chip, base + i, *(rgb + i));
+
+        lp55xx_write(chip, base + i, 0);
+        lp55xx_write(chip, base + i + 1, 0);
+}
+
+/* check the size of program count */
+static inline bool _is_pc_overflow(struct lp55xx_predef_pattern *ptn)
+{
+        return (ptn->size_r >= LP5562_PROGRAM_LENGTH ||
+                ptn->size_g >= LP5562_PROGRAM_LENGTH ||
+                ptn->size_b >= LP5562_PROGRAM_LENGTH);
+}
+
+static int lp5562_run_predef_led_pattern(struct lp55xx_chip *chip, int mode)
+{
+        struct lp55xx_predef_pattern *ptn;
+        int i;
+
+        if (mode == LP5562_PATTERN_OFF) {
+                lp5562_run_engine(chip, false);
+                return 0;
+        }
+
+        ptn = chip->pdata->patterns + (mode - 1);
+        if (!ptn || _is_pc_overflow(ptn)) {
+                dev_err(&chip->cl->dev, "invalid pattern data\n");
+                return -EINVAL;
+        }
+
+        lp5562_stop_engine(chip);
+
+        /* Set LED map as RGB */
+        lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_RGB);
+
+        /* Load engines */
+        for (i = LP55XX_ENGINE_1; i <= LP55XX_ENGINE_3; i++) {
+                chip->engine_idx = i;
+                lp5562_load_engine(chip);
+        }
+
+        /* Clear program registers */
+        lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1, 0);
+        lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1 + 1, 0);
+        lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2, 0);
+        lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2 + 1, 0);
+        lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3, 0);
+        lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3 + 1, 0);
+
+        /* Program engines */
+        lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG1,
+                                ptn->r, ptn->size_r);
+        lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG2,
+                                ptn->g, ptn->size_g);
+        lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG3,
+                                ptn->b, ptn->size_b);
+
+        /* Run engines */
+        lp5562_run_engine(chip, true);
+
+        return 0;
+}
+
+static ssize_t lp5562_store_pattern(struct device *dev,
+                                struct device_attribute *attr,
+                                const char *buf, size_t len)
+{
+        struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+        struct lp55xx_chip *chip = led->chip;
+        struct lp55xx_predef_pattern *ptn = chip->pdata->patterns;
+        int num_patterns = chip->pdata->num_patterns;
+        unsigned long mode;
+        int ret;
+
+        ret = kstrtoul(buf, 0, &mode);
+        if (ret)
+                return ret;
+
+        if (mode > num_patterns || !ptn)
+                return -EINVAL;
+
+        mutex_lock(&chip->lock);
+        ret = lp5562_run_predef_led_pattern(chip, mode);
+        mutex_unlock(&chip->lock);
+
+        if (ret)
+                return ret;
+
+        return len;
+}
+
+static ssize_t lp5562_store_engine_mux(struct device *dev,
+                                     struct device_attribute *attr,
+                                     const char *buf, size_t len)
+{
+        struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+        struct lp55xx_chip *chip = led->chip;
+        u8 mask;
+        u8 val;
+
+        /* LED map
+         * R ... Engine 1 (fixed)
+         * G ... Engine 2 (fixed)
+         * B ... Engine 3 (fixed)
+         * W ... Engine 1 or 2 or 3
+         */
+
+        if (sysfs_streq(buf, "RGB")) {
+                mask = LP5562_ENG_FOR_RGB_M;
+                val = LP5562_ENG_SEL_RGB;
+        } else if (sysfs_streq(buf, "W")) {
+                enum lp55xx_engine_index idx = chip->engine_idx;
+
+                mask = LP5562_ENG_FOR_W_M;
+                switch (idx) {
+                case LP55XX_ENGINE_1:
+                        val = LP5562_ENG1_FOR_W;
+                        break;
+                case LP55XX_ENGINE_2:
+                        val = LP5562_ENG2_FOR_W;
+                        break;
+                case LP55XX_ENGINE_3:
+                        val = LP5562_ENG3_FOR_W;
+                        break;
+                default:
+                        return -EINVAL;
+                }
+
+        } else {
+                dev_err(dev, "choose RGB or W\n");
+                return -EINVAL;
+        }
+
+        mutex_lock(&chip->lock);
+        lp55xx_update_bits(chip, LP5562_REG_ENG_SEL, mask, val);
+        mutex_unlock(&chip->lock);
+
+        return len;
+}
+
+static DEVICE_ATTR(led_pattern, S_IWUSR, NULL, lp5562_store_pattern);
+static DEVICE_ATTR(engine_mux, S_IWUSR, NULL, lp5562_store_engine_mux);
+
+static struct attribute *lp5562_attributes[] = {
+        &dev_attr_led_pattern.attr,
+        &dev_attr_engine_mux.attr,
+        NULL,
+};
+
+static const struct attribute_group lp5562_group = {
+        .attrs = lp5562_attributes,
+};
+
+/* Chip specific configurations */
+static struct lp55xx_device_config lp5562_cfg = {
+        .max_channel  = LP5562_MAX_LEDS,
+        .reset = {
+                .addr = LP5562_REG_RESET,
+                .val  = LP5562_RESET,
+        },
+        .enable = {
+                .addr = LP5562_REG_ENABLE,
+                .val  = LP5562_ENABLE_DEFAULT,
+        },
+        .post_init_device   = lp5562_post_init_device,
+        .set_led_current    = lp5562_set_led_current,
+        .brightness_work_fn = lp5562_led_brightness_work,
+        .run_engine         = lp5562_run_engine,
+        .firmware_cb        = lp5562_firmware_loaded,
+        .dev_attr_group     = &lp5562_group,
+};
+
+static int lp5562_probe(struct i2c_client *client,
+                        const struct i2c_device_id *id)
+{
+        int ret;
+        struct lp55xx_chip *chip;
+        struct lp55xx_led *led;
+        struct lp55xx_platform_data *pdata = client->dev.platform_data;
+
+        if (!pdata) {
+                dev_err(&client->dev, "no platform data\n");
+                return -EINVAL;
+        }
+
+        chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+        if (!chip)
+                return -ENOMEM;
+
+        led = devm_kzalloc(&client->dev,
+                        sizeof(*led) * pdata->num_channels, GFP_KERNEL);
+        if (!led)
+                return -ENOMEM;
+
+        chip->cl = client;
+        chip->pdata = pdata;
+        chip->cfg = &lp5562_cfg;
+
+        mutex_init(&chip->lock);
+
+        i2c_set_clientdata(client, led);
+
+        ret = lp55xx_init_device(chip);
+        if (ret)
+                goto err_init;
+
+        ret = lp55xx_register_leds(led, chip);
+        if (ret)
+                goto err_register_leds;
+
+        ret = lp55xx_register_sysfs(chip);
+        if (ret) {
+                dev_err(&client->dev, "registering sysfs failed\n");
+                goto err_register_sysfs;
+        }
+
+        return 0;
+
+err_register_sysfs:
+        lp55xx_unregister_leds(led, chip);
+err_register_leds:
+        lp55xx_deinit_device(chip);
+err_init:
+        return ret;
+}
+
+static int lp5562_remove(struct i2c_client *client)
+{
+        struct lp55xx_led *led = i2c_get_clientdata(client);
+        struct lp55xx_chip *chip = led->chip;
+
+        lp5562_stop_engine(chip);
+
+        lp55xx_unregister_sysfs(chip);
+        lp55xx_unregister_leds(led, chip);
+        lp55xx_deinit_device(chip);
+
+        return 0;
+}
+
+static const struct i2c_device_id lp5562_id[] = {
+        { "lp5562", 0 },
+        { }
+};
+MODULE_DEVICE_TABLE(i2c, lp5562_id);
+
+static struct i2c_driver lp5562_driver = {
+        .driver = {
+                .name   = "lp5562",
+        },
+        .probe          = lp5562_probe,
+        .remove         = lp5562_remove,
+        .id_table       = lp5562_id,
+};
+
+module_i2c_driver(lp5562_driver);
+
+MODULE_DESCRIPTION("Texas Instruments LP5562 LED Driver");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL");
diff --git a/drivers/leds/leds-lp55xx-common.c b/drivers/leds/leds-lp55xx-common.c
index d9eb84157423..8a388a4afed7 100644
--- a/drivers/leds/leds-lp55xx-common.c
+++ b/drivers/leds/leds-lp55xx-common.c
@@ -1,5 +1,5 @@
 /*
- * LP5521/LP5523/LP55231 Common Driver
+ * LP5521/LP5523/LP55231/LP5562 Common Driver
  *
  * Copyright 2012 Texas Instruments
  *
diff --git a/include/linux/platform_data/leds-lp55xx.h b/include/linux/platform_data/leds-lp55xx.h
index 1509570d5a3f..1f1041e8b4fc 100644
--- a/include/linux/platform_data/leds-lp55xx.h
+++ b/include/linux/platform_data/leds-lp55xx.h
@@ -32,6 +32,13 @@
 #define LP5521_CLK_INT                  1       /* Internal clock */
 #define LP5521_CLK_AUTO                 2       /* Automatic clock selection */
 
+/* Bits in LP5562 CONFIG register */
+#define LP5562_PWM_HF                   LP5521_PWM_HF
+#define LP5562_PWRSAVE_EN               LP5521_PWRSAVE_EN
+#define LP5562_CLK_SRC_EXT              LP5521_CLK_SRC_EXT
+#define LP5562_CLK_INT                  LP5521_CLK_INT
+#define LP5562_CLK_AUTO                 LP5521_CLK_AUTO
+
 struct lp55xx_led_config {
         const char *name;
         u8 chan_nr;
@@ -40,9 +47,9 @@ struct lp55xx_led_config {
 };
 
 struct lp55xx_predef_pattern {
-        u8 *r;
-        u8 *g;
-        u8 *b;
+        const u8 *r;
+        const u8 *g;
+        const u8 *b;
         u8 size_r;
         u8 size_g;
         u8 size_b;