2 files changed, 15 insertions, 4 deletions

diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts
index c8e51dd41b8f..d1c892e28296 100644
--- a/arch/arm/boot/dts/imx6dl-hummingboard.dts
+++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts
@@ -181,11 +181,13 @@
 };
 
 &usbh1 {
+        disable-over-current;
         vbus-supply = <&reg_usbh1_vbus>;
         status = "okay";
 };
 
 &usbotg {
+        disable-over-current;
         pinctrl-names = "default";
         pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>;
         vbus-supply = <&reg_usbotg_vbus>;
diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
index e8e781656b3f..298d0fdf8ebe 100644
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
@@ -130,16 +130,23 @@
                         fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
                 };
 
+                pinctrl_cubox_i_usbh1: cubox-i-usbh1 {
+                        fsl,pins = <MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0>;
+                };
+
                 pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus {
                         fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>;
                 };
 
-                pinctrl_cubox_i_usbotg_id: cubox-i-usbotg-id {
+                pinctrl_cubox_i_usbotg: cubox-i-usbotg {
                         /*
-                         * The Cubox-i pulls this low, but as it's pointless
+                         * The Cubox-i pulls ID low, but as it's pointless
                          * leaving it as a pull-up, even if it is just 10uA.
                          */
-                        fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
+                        fsl,pins = <
+                                MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
+                                MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+                        >;
                 };
 
                 pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus {
@@ -173,13 +180,15 @@
 };
 
 &usbh1 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_cubox_i_usbh1>;
         vbus-supply = <&reg_usbh1_vbus>;
         status = "okay";
 };
 
 &usbotg {
         pinctrl-names = "default";
-        pinctrl-0 = <&pinctrl_cubox_i_usbotg_id>;
+        pinctrl-0 = <&pinctrl_cubox_i_usbotg>;
         vbus-supply = <&reg_usbotg_vbus>;
         status = "okay";
 };