4 files changed, 20 insertions, 15 deletions

diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index 19645095d597..a76819812019 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -148,6 +148,7 @@ __init board_nand_init(struct mtd_partition *nand_parts,
         board_nand_data.nr_parts        = nr_parts;
         board_nand_data.devsize         = nand_type;
 
+        board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
         board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs;
         gpmc_nand_init(&board_nand_data);
 }
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
index a2434639063d..773351bc25a2 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -86,6 +86,12 @@
 #define PREFETCH_FIFOTHRESHOLD_MAX      0x40
 #define PREFETCH_FIFOTHRESHOLD(val)     ((val) << 8)
 
+enum omap_ecc {
+                /* 1-bit ecc: stored at end of spare area */
+        OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
+        OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
+};
+
 /*
  * Note that all values in this struct are in nanoseconds except sync_clk
  * (which is in picoseconds), while the register values are in gpmc_fck cycles.
diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h
index ae5e05383031..d86d1ecf0068 100644
--- a/arch/arm/plat-omap/include/plat/nand.h
+++ b/arch/arm/plat-omap/include/plat/nand.h
@@ -8,6 +8,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <plat/gpmc.h>
 #include <linux/mtd/partitions.h>
 
 enum nand_io {
@@ -31,6 +32,7 @@ struct omap_nand_platform_data {
         enum nand_io            xfer_type;
         unsigned long           phys_base;
         int                     devsize;
+        enum omap_ecc           ecc_opt;
 };
 
 /* minimum size for IO mapping */
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index f1648fd5924a..6d4a42e39380 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -626,8 +626,6 @@ static int omap_verify_buf(struct mtd_info *mtd, const u_char * buf, int len)
         return 0;
 }
 
-#ifdef CONFIG_MTD_NAND_OMAP_HWECC
-
 /**
  * gen_true_ecc - This function will generate true ECC value
  * @ecc_buf: buffer to store ecc code
@@ -847,8 +845,6 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int mode)
         gpmc_enable_hwecc(info->gpmc_cs, mode, dev_width, info->nand.ecc.size);
 }
 
-#endif
-
 /**
  * omap_wait - wait until the command is done
  * @mtd: MTD device structure
@@ -1038,17 +1034,17 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
 
         info->nand.verify_buf = omap_verify_buf;
 
-#ifdef CONFIG_MTD_NAND_OMAP_HWECC
-        info->nand.ecc.bytes            = 3;
-        info->nand.ecc.size             = 512;
-        info->nand.ecc.calculate        = omap_calculate_ecc;
-        info->nand.ecc.hwctl            = omap_enable_hwecc;
-        info->nand.ecc.correct          = omap_correct_data;
-        info->nand.ecc.mode             = NAND_ECC_HW;
-
-#else
-        info->nand.ecc.mode = NAND_ECC_SOFT;
-#endif
+        /* selsect the ecc type */
+        if (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_DEFAULT)
+                info->nand.ecc.mode = NAND_ECC_SOFT;
+        else if (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW) {
+                info->nand.ecc.bytes            = 3;
+                info->nand.ecc.size             = 512;
+                info->nand.ecc.calculate        = omap_calculate_ecc;
+                info->nand.ecc.hwctl            = omap_enable_hwecc;
+                info->nand.ecc.correct          = omap_correct_data;
+                info->nand.ecc.mode             = NAND_ECC_HW;
+        }
 
         /* DIP switches on some boards change between 8 and 16 bit
          * bus widths for flash.  Try the other width if the first try fails.