3 files changed, 0 insertions, 141 deletions

diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 85a567720fe8..4bf2737e6cee 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -19,13 +19,6 @@ config MACH_ESATA_SHEEVAPLUG
           Say 'Y' here if you want your kernel to support the
           Marvell eSATA SheevaPlug Reference Board.
 
-config MACH_GURUPLUG
-        bool "Marvell GuruPlug Reference Board"
-        select KIRKWOOD_LEGACY
-        help
-          Say 'Y' here if you want your kernel to support the
-          Marvell GuruPlug Reference Board.
-
 config MACH_INETSPACE_V2
         bool "LaCie Internet Space v2 NAS Board"
         select KIRKWOOD_LEGACY
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 646b77e650ce..3c748ea1585b 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -2,7 +2,6 @@ obj-y				+= common.o pcie.o
 obj-$(CONFIG_KIRKWOOD_LEGACY)   += irq.o mpp.o
 obj-$(CONFIG_MACH_D2NET_V2)             += d2net_v2-setup.o lacie_v2-common.o
 obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)     += sheevaplug-setup.o
-obj-$(CONFIG_MACH_GURUPLUG)             += guruplug-setup.o
 obj-$(CONFIG_MACH_INETSPACE_V2)         += netspace_v2-setup.o lacie_v2-common.o
 obj-$(CONFIG_MACH_MV88F6281GTW_GE)      += mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_NET2BIG_V2)           += netxbig_v2-setup.o lacie_v2-common.o
diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
deleted file mode 100644
index 08dd739aa709..000000000000
--- a/arch/arm/mach-kirkwood/guruplug-setup.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/guruplug-setup.c
- *
- * Marvell GuruPlug Reference Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <linux/platform_data/mmc-mvsdio.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition guruplug_nand_parts[] = {
-        {
-                .name = "u-boot",
-                .offset = 0,
-                .size = SZ_1M
-        }, {
-                .name = "uImage",
-                .offset = MTDPART_OFS_NXTBLK,
-                .size = SZ_4M
-        }, {
-                .name = "root",
-                .offset = MTDPART_OFS_NXTBLK,
-                .size = MTDPART_SIZ_FULL
-        },
-};
-
-static struct mv643xx_eth_platform_data guruplug_ge00_data = {
-        .phy_addr       = MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data guruplug_ge01_data = {
-        .phy_addr       = MV643XX_ETH_PHY_ADDR(1),
-};
-
-static struct mv_sata_platform_data guruplug_sata_data = {
-        .n_ports        = 1,
-};
-
-static struct mvsdio_platform_data guruplug_mvsdio_data = {
-        /* unfortunately the CD signal has not been connected */
-        .gpio_card_detect = -1,
-        .gpio_write_protect = -1,
-};
-
-static struct gpio_led guruplug_led_pins[] = {
-        {
-                .name                   = "guruplug:red:health",
-                .gpio                   = 46,
-                .active_low             = 1,
-        },
-        {
-                .name                   = "guruplug:green:health",
-                .gpio                   = 47,
-                .active_low             = 1,
-        },
-        {
-                .name                   = "guruplug:red:wmode",
-                .gpio                   = 48,
-                .active_low             = 1,
-        },
-        {
-                .name                   = "guruplug:green:wmode",
-                .gpio                   = 49,
-                .active_low             = 1,
-        },
-};
-
-static struct gpio_led_platform_data guruplug_led_data = {
-        .leds           = guruplug_led_pins,
-        .num_leds       = ARRAY_SIZE(guruplug_led_pins),
-};
-
-static struct platform_device guruplug_leds = {
-        .name   = "leds-gpio",
-        .id     = -1,
-        .dev    = {
-                .platform_data  = &guruplug_led_data,
-        }
-};
-
-static unsigned int guruplug_mpp_config[] __initdata = {
-        MPP46_GPIO,     /* M_RLED */
-        MPP47_GPIO,     /* M_GLED */
-        MPP48_GPIO,     /* B_RLED */
-        MPP49_GPIO,     /* B_GLED */
-        0
-};
-
-static void __init guruplug_init(void)
-{
-        /*
-         * Basic setup. Needs to be called early.
-         */
-        kirkwood_init();
-        kirkwood_mpp_conf(guruplug_mpp_config);
-
-        kirkwood_uart0_init();
-        kirkwood_nand_init(ARRAY_AND_SIZE(guruplug_nand_parts), 25);
-
-        kirkwood_ehci_init();
-        kirkwood_ge00_init(&guruplug_ge00_data);
-        kirkwood_ge01_init(&guruplug_ge01_data);
-        kirkwood_sata_init(&guruplug_sata_data);
-        kirkwood_sdio_init(&guruplug_mvsdio_data);
-
-        platform_device_register(&guruplug_leds);
-}
-
-MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board")
-        /* Maintainer: Siddarth Gore <gores@marvell.com> */
-        .atag_offset    = 0x100,
-        .init_machine   = guruplug_init,
-        .map_io         = kirkwood_map_io,
-        .init_early     = kirkwood_init_early,
-        .init_irq       = kirkwood_init_irq,
-        .init_time      = kirkwood_timer_init,
-        .restart        = kirkwood_restart,
-MACHINE_END