5 files changed, 43 insertions, 126 deletions

diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c
index c72565520e41..d388eadb9fdb 100644
--- a/drivers/isdn/hardware/avm/avm_cs.c
+++ b/drivers/isdn/hardware/avm/avm_cs.c
@@ -198,7 +198,6 @@ static int avmcs_config(struct pcmcia_device *link)
          */
         i = pcmcia_request_irq(link, &link->irq);
         if (i != 0) {
-            cs_error(link, RequestIRQ, i);
             /* undo */
             pcmcia_disable_device(link);
             break;
@@ -209,7 +208,6 @@ static int avmcs_config(struct pcmcia_device *link)
           */
         i = pcmcia_request_configuration(link, &link->conf);
         if (i != 0) {
-            cs_error(link, RequestConfiguration, i);
             pcmcia_disable_device(link);
             break;
         }
diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c
index 23560c897ec3..6d963f9a09ce 100644
--- a/drivers/isdn/hisax/avma1_cs.c
+++ b/drivers/isdn/hisax/avma1_cs.c
@@ -30,22 +30,6 @@ MODULE_DESCRIPTION("ISDN4Linux: PCMCIA client driver for AVM A1/Fritz!PCMCIA car
 MODULE_AUTHOR("Carsten Paeth");
 MODULE_LICENSE("GPL");
 
-/*
-   All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If
-   you do not define PCMCIA_DEBUG at all, all the debug code will be
-   left out.  If you compile with PCMCIA_DEBUG=0, the debug code will
-   be present but disabled -- but it can then be enabled for specific
-   modules at load time with a 'pc_debug=#' option to insmod.
-*/
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args);
-static char *version =
-"avma1_cs.c 1.00 1998/01/23 10:00:00 (Carsten Paeth)";
-#else
-#define DEBUG(n, args...)
-#endif
 
 /*====================================================================*/
 
@@ -119,7 +103,7 @@ static int avma1cs_probe(struct pcmcia_device *p_dev)
 {
     local_info_t *local;
 
-    DEBUG(0, "avma1cs_attach()\n");
+    dev_dbg(&p_dev->dev, "avma1cs_attach()\n");
 
     /* Allocate space for private device-specific data */
     local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
@@ -161,7 +145,7 @@ static int avma1cs_probe(struct pcmcia_device *p_dev)
 
 static void avma1cs_detach(struct pcmcia_device *link)
 {
-        DEBUG(0, "avma1cs_detach(0x%p)\n", link);
+        dev_dbg(&link->dev, "avma1cs_detach(0x%p)\n", link);
         avma1cs_release(link);
         kfree(link->priv);
 } /* avma1cs_detach */
@@ -203,7 +187,7 @@ static int avma1cs_config(struct pcmcia_device *link)
 
     dev = link->priv;
 
-    DEBUG(0, "avma1cs_config(0x%p)\n", link);
+    dev_dbg(&link->dev, "avma1cs_config(0x%p)\n", link);
 
     devname[0] = 0;
     if (link->prod_id[1])
@@ -218,7 +202,6 @@ static int avma1cs_config(struct pcmcia_device *link)
          */
         i = pcmcia_request_irq(link, &link->irq);
         if (i != 0) {
-            cs_error(link, RequestIRQ, i);
             /* undo */
             pcmcia_disable_device(link);
             break;
@@ -229,7 +212,6 @@ static int avma1cs_config(struct pcmcia_device *link)
          */
         i = pcmcia_request_configuration(link, &link->conf);
         if (i != 0) {
-            cs_error(link, RequestConfiguration, i);
             pcmcia_disable_device(link);
             break;
         }
@@ -281,7 +263,7 @@ static void avma1cs_release(struct pcmcia_device *link)
 {
         local_info_t *local = link->priv;
 
-        DEBUG(0, "avma1cs_release(0x%p)\n", link);
+        dev_dbg(&link->dev, "avma1cs_release(0x%p)\n", link);
 
         /* now unregister function with hisax */
         HiSax_closecard(local->node.minor);
diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c
index f4d0fe29bcf8..cdcd2979fcd4 100644
--- a/drivers/isdn/hisax/elsa_cs.c
+++ b/drivers/isdn/hisax/elsa_cs.c
@@ -57,23 +57,6 @@ MODULE_DESCRIPTION("ISDN4Linux: PCMCIA client driver for Elsa PCM cards");
 MODULE_AUTHOR("Klaus Lichtenwalder");
 MODULE_LICENSE("Dual MPL/GPL");
 
-/*
-   All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If
-   you do not define PCMCIA_DEBUG at all, all the debug code will be
-   left out.  If you compile with PCMCIA_DEBUG=0, the debug code will
-   be present but disabled -- but it can then be enabled for specific
-   modules at load time with a 'pc_debug=#' option to insmod.
-*/
-
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args);
-static char *version =
-"elsa_cs.c $Revision: 1.2.2.4 $ $Date: 2004/01/25 15:07:06 $ (K.Lichtenwalder)";
-#else
-#define DEBUG(n, args...)
-#endif
 
 /*====================================================================*/
 
@@ -142,7 +125,7 @@ static int elsa_cs_probe(struct pcmcia_device *link)
 {
     local_info_t *local;
 
-    DEBUG(0, "elsa_cs_attach()\n");
+    dev_dbg(&link->dev, "elsa_cs_attach()\n");
 
     /* Allocate space for private device-specific data */
     local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
@@ -188,7 +171,7 @@ static void elsa_cs_detach(struct pcmcia_device *link)
 {
         local_info_t *info = link->priv;
 
-        DEBUG(0, "elsa_cs_detach(0x%p)\n", link);
+        dev_dbg(&link->dev, "elsa_cs_detach(0x%p)\n", link);
 
         info->busy = 1;
         elsa_cs_release(link);
@@ -231,30 +214,25 @@ static int elsa_cs_configcheck(struct pcmcia_device *p_dev,
 static int elsa_cs_config(struct pcmcia_device *link)
 {
     local_info_t *dev;
-    int i, last_fn;
+    int i;
     IsdnCard_t icard;
 
-    DEBUG(0, "elsa_config(0x%p)\n", link);
+    dev_dbg(&link->dev, "elsa_config(0x%p)\n", link);
     dev = link->priv;
 
     i = pcmcia_loop_config(link, elsa_cs_configcheck, NULL);
-    if (i != 0) {
-        last_fn = RequestIO;
-        goto cs_failed;
-    }
+    if (i != 0)
+        goto failed;
 
     i = pcmcia_request_irq(link, &link->irq);
     if (i != 0) {
         link->irq.AssignedIRQ = 0;
-        last_fn = RequestIRQ;
-        goto cs_failed;
+        goto failed;
     }
 
     i = pcmcia_request_configuration(link, &link->conf);
-    if (i != 0) {
-      last_fn = RequestConfiguration;
-      goto cs_failed;
-    }
+    if (i != 0)
+        goto failed;
 
     /* At this point, the dev_node_t structure(s) should be
        initialized and arranged in a linked list at link->dev. *//*  */
@@ -290,8 +268,7 @@ static int elsa_cs_config(struct pcmcia_device *link)
         ((local_info_t*)link->priv)->cardnr = i;
 
     return 0;
-cs_failed:
-    cs_error(link, last_fn, i);
+failed:
     elsa_cs_release(link);
     return -ENODEV;
 } /* elsa_cs_config */
@@ -308,7 +285,7 @@ static void elsa_cs_release(struct pcmcia_device *link)
 {
     local_info_t *local = link->priv;
 
-    DEBUG(0, "elsa_cs_release(0x%p)\n", link);
+    dev_dbg(&link->dev, "elsa_cs_release(0x%p)\n", link);
 
     if (local) {
         if (local->cardnr >= 0) {
diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c
index 9a3c9f5e4fe8..33d7530527c7 100644
--- a/drivers/isdn/hisax/sedlbauer_cs.c
+++ b/drivers/isdn/hisax/sedlbauer_cs.c
@@ -57,24 +57,6 @@ MODULE_DESCRIPTION("ISDN4Linux: PCMCIA client driver for Sedlbauer cards");
 MODULE_AUTHOR("Marcus Niemann");
 MODULE_LICENSE("Dual MPL/GPL");
 
-/*
-   All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If
-   you do not define PCMCIA_DEBUG at all, all the debug code will be
-   left out.  If you compile with PCMCIA_DEBUG=0, the debug code will
-   be present but disabled -- but it can then be enabled for specific
-   modules at load time with a 'pc_debug=#' option to insmod.
-*/
-
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args); 
-static char *version =
-"sedlbauer_cs.c 1.1a 2001/01/28 15:04:04 (M.Niemann)";
-#else
-#define DEBUG(n, args...)
-#endif
-
 
 /*====================================================================*/
 
@@ -151,7 +133,7 @@ static int sedlbauer_probe(struct pcmcia_device *link)
 {
     local_info_t *local;
 
-    DEBUG(0, "sedlbauer_attach()\n");
+    dev_dbg(&link->dev, "sedlbauer_attach()\n");
 
     /* Allocate space for private device-specific data */
     local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
@@ -198,7 +180,7 @@ static int sedlbauer_probe(struct pcmcia_device *link)
 
 static void sedlbauer_detach(struct pcmcia_device *link)
 {
-        DEBUG(0, "sedlbauer_detach(0x%p)\n", link);
+        dev_dbg(&link->dev, "sedlbauer_detach(0x%p)\n", link);
 
         ((local_info_t *)link->priv)->stop = 1;
         sedlbauer_release(link);
@@ -214,9 +196,6 @@ static void sedlbauer_detach(struct pcmcia_device *link)
     device available to the system.
     
 ======================================================================*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
 static int sedlbauer_config_check(struct pcmcia_device *p_dev,
                                   cistpl_cftable_entry_t *cfg,
                                   cistpl_cftable_entry_t *dflt,
@@ -309,10 +288,10 @@ static int sedlbauer_config(struct pcmcia_device *link)
 {
     local_info_t *dev = link->priv;
     win_req_t *req;
-    int last_fn, last_ret;
+    int ret;
     IsdnCard_t  icard;
 
-    DEBUG(0, "sedlbauer_config(0x%p)\n", link);
+    dev_dbg(&link->dev, "sedlbauer_config(0x%p)\n", link);
 
     req = kzalloc(sizeof(win_req_t), GFP_KERNEL);
     if (!req)
@@ -330,8 +309,8 @@ static int sedlbauer_config(struct pcmcia_device *link)
       these things without consulting the CIS, and most client drivers
       will only use the CIS to fill in implementation-defined details.
     */
-    last_ret = pcmcia_loop_config(link, sedlbauer_config_check, req);
-    if (last_ret)
+    ret = pcmcia_loop_config(link, sedlbauer_config_check, req);
+    if (ret)
             goto failed;
 
     /*
@@ -339,15 +318,20 @@ static int sedlbauer_config(struct pcmcia_device *link)
        handler to the interrupt, unless the 'Handler' member of the
        irq structure is initialized.
     */
-    if (link->conf.Attributes & CONF_ENABLE_IRQ)
-        CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+    if (link->conf.Attributes & CONF_ENABLE_IRQ) {
+            ret = pcmcia_request_irq(link, &link->irq);
+            if (ret)
+                    goto failed;
+    }
         
     /*
        This actually configures the PCMCIA socket -- setting up
        the I/O windows and the interrupt mapping, and putting the
        card and host interface into "Memory and IO" mode.
     */
-    CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+    ret = pcmcia_request_configuration(link, &link->conf);
+    if (ret)
+            goto failed;
 
     /*
       At this point, the dev_node_t structure(s) need to be
@@ -380,19 +364,18 @@ static int sedlbauer_config(struct pcmcia_device *link)
     icard.protocol = protocol;
     icard.typ = ISDN_CTYPE_SEDLBAUER_PCMCIA;
     
-    last_ret = hisax_init_pcmcia(link, &(((local_info_t*)link->priv)->stop), &icard);
-    if (last_ret < 0) {
-        printk(KERN_ERR "sedlbauer_cs: failed to initialize SEDLBAUER PCMCIA %d at i/o %#x\n",
-                last_ret, link->io.BasePort1);
+    ret = hisax_init_pcmcia(link, 
+                            &(((local_info_t *)link->priv)->stop), &icard);
+    if (ret < 0) {
+        printk(KERN_ERR "sedlbauer_cs: failed to initialize SEDLBAUER PCMCIA %d at i/o %#x\n",
+                ret, link->io.BasePort1);
         sedlbauer_release(link);
         return -ENODEV;
     } else
-        ((local_info_t*)link->priv)->cardnr = last_ret;
+        ((local_info_t *)link->priv)->cardnr = ret;
 
     return 0;
 
-cs_failed:
-    cs_error(link, last_fn, last_ret);
 failed:
     sedlbauer_release(link);
     return -ENODEV;
@@ -410,7 +393,7 @@ failed:
 static void sedlbauer_release(struct pcmcia_device *link)
 {
     local_info_t *local = link->priv;
-    DEBUG(0, "sedlbauer_release(0x%p)\n", link);
+    dev_dbg(&link->dev, "sedlbauer_release(0x%p)\n", link);
 
     if (local) {
         if (local->cardnr >= 0) {
diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c
index 623d111544d4..7b11c15b3a97 100644
--- a/drivers/isdn/hisax/teles_cs.c
+++ b/drivers/isdn/hisax/teles_cs.c
@@ -38,23 +38,6 @@ MODULE_DESCRIPTION("ISDN4Linux: PCMCIA client driver for Teles PCMCIA cards");
 MODULE_AUTHOR("Christof Petig, christof.petig@wtal.de, Karsten Keil, kkeil@suse.de");
 MODULE_LICENSE("GPL");
 
-/*
-   All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If
-   you do not define PCMCIA_DEBUG at all, all the debug code will be
-   left out.  If you compile with PCMCIA_DEBUG=0, the debug code will
-   be present but disabled -- but it can then be enabled for specific
-   modules at load time with a 'pc_debug=#' option to insmod.
-*/
-
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args);
-static char *version =
-"teles_cs.c 2.10 2002/07/30 22:23:34 kkeil";
-#else
-#define DEBUG(n, args...)
-#endif
 
 /*====================================================================*/
 
@@ -133,7 +116,7 @@ static int teles_probe(struct pcmcia_device *link)
 {
     local_info_t *local;
 
-    DEBUG(0, "teles_attach()\n");
+    dev_dbg(&link->dev, "teles_attach()\n");
 
     /* Allocate space for private device-specific data */
     local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
@@ -178,7 +161,7 @@ static void teles_detach(struct pcmcia_device *link)
 {
         local_info_t *info = link->priv;
 
-        DEBUG(0, "teles_detach(0x%p)\n", link);
+        dev_dbg(&link->dev, "teles_detach(0x%p)\n", link);
 
         info->busy = 1;
         teles_cs_release(link);
@@ -221,30 +204,25 @@ static int teles_cs_configcheck(struct pcmcia_device *p_dev,
 static int teles_cs_config(struct pcmcia_device *link)
 {
     local_info_t *dev;
-    int i, last_fn;
+    int i;
     IsdnCard_t icard;
 
-    DEBUG(0, "teles_config(0x%p)\n", link);
+    dev_dbg(&link->dev, "teles_config(0x%p)\n", link);
     dev = link->priv;
 
     i = pcmcia_loop_config(link, teles_cs_configcheck, NULL);
-    if (i != 0) {
-        last_fn = RequestIO;
+    if (i != 0)
         goto cs_failed;
-    }
 
     i = pcmcia_request_irq(link, &link->irq);
     if (i != 0) {
         link->irq.AssignedIRQ = 0;
-        last_fn = RequestIRQ;
         goto cs_failed;
     }
 
     i = pcmcia_request_configuration(link, &link->conf);
-    if (i != 0) {
-      last_fn = RequestConfiguration;
+    if (i != 0)
       goto cs_failed;
-    }
 
     /* At this point, the dev_node_t structure(s) should be
        initialized and arranged in a linked list at link->dev. *//*  */
@@ -283,7 +261,6 @@ static int teles_cs_config(struct pcmcia_device *link)
     return 0;
 
 cs_failed:
-    cs_error(link, last_fn, i);
     teles_cs_release(link);
     return -ENODEV;
 } /* teles_cs_config */
@@ -300,7 +277,7 @@ static void teles_cs_release(struct pcmcia_device *link)
 {
     local_info_t *local = link->priv;
 
-    DEBUG(0, "teles_cs_release(0x%p)\n", link);
+    dev_dbg(&link->dev, "teles_cs_release(0x%p)\n", link);
 
     if (local) {
         if (local->cardnr >= 0) {