7 files changed, 50 insertions, 8 deletions

diff --git a/arch/mips/dec/ioasic-irq.c b/arch/mips/dec/ioasic-irq.c
index 824e08c73798..4b3e3a4375a6 100644
--- a/arch/mips/dec/ioasic-irq.c
+++ b/arch/mips/dec/ioasic-irq.c
@@ -51,6 +51,14 @@ static struct irq_chip ioasic_irq_type = {
         .irq_unmask = unmask_ioasic_irq,
 };
 
+void clear_ioasic_dma_irq(unsigned int irq)
+{
+        u32 sir;
+
+        sir = ~(1 << (irq - ioasic_irq_base));
+        ioasic_write(IO_REG_SIR, sir);
+}
+
 static struct irq_chip ioasic_dma_irq_type = {
         .name = "IO-ASIC-DMA",
         .irq_ack = ack_ioasic_irq,
diff --git a/arch/mips/dec/time.c b/arch/mips/dec/time.c
index 56ebc7f2bede..1914e56f0d96 100644
--- a/arch/mips/dec/time.c
+++ b/arch/mips/dec/time.c
@@ -125,12 +125,16 @@ int rtc_mips_set_mmss(unsigned long nowtime)
 
 void __init plat_time_init(void)
 {
+        int ioasic_clock = 0;
         u32 start, end;
         int i = HZ / 8;
 
         /* Set up the rate of periodic DS1287 interrupts. */
         ds1287_set_base_clock(HZ);
 
+        /* On some I/O ASIC systems we have the I/O ASIC's counter.  */
+        if (IOASIC)
+                ioasic_clock = dec_ioasic_clocksource_init() == 0;
         if (cpu_has_counter) {
                 ds1287_timer_state();
                 while (!ds1287_timer_state())
@@ -147,9 +151,21 @@ void __init plat_time_init(void)
                 mips_hpt_frequency = (end - start) * 8;
                 printk(KERN_INFO "MIPS counter frequency %dHz\n",
                         mips_hpt_frequency);
-        } else if (IOASIC)
-                /* For pre-R4k systems we use the I/O ASIC's counter.  */
-                dec_ioasic_clocksource_init();
+
+                /*
+                 * All R4k DECstations suffer from the CP0 Count erratum,
+                 * so we can't use the timer as a clock source, and a clock
+                 * event both at a time.  An accurate wall clock is more
+                 * important than a high-precision interval timer so only
+                 * use the timer as a clock source, and not a clock event
+                 * if there's no I/O ASIC counter available to serve as a
+                 * clock source.
+                 */
+                if (!ioasic_clock) {
+                        init_r4k_clocksource();
+                        mips_hpt_frequency = 0;
+                }
+        }
 
         ds1287_clockevent_init(dec_interrupt[DEC_IRQ_RTC]);
 }
diff --git a/arch/mips/include/asm/dec/ioasic.h b/arch/mips/include/asm/dec/ioasic.h
index 98badd6bf22d..a6e505a0e44b 100644
--- a/arch/mips/include/asm/dec/ioasic.h
+++ b/arch/mips/include/asm/dec/ioasic.h
@@ -31,8 +31,10 @@ static inline u32 ioasic_read(unsigned int reg)
         return ioasic_base[reg / 4];
 }
 
+extern void clear_ioasic_dma_irq(unsigned int irq);
+
 extern void init_ioasic_irqs(int base);
 
-extern void dec_ioasic_clocksource_init(void);
+extern int dec_ioasic_clocksource_init(void);
 
 #endif /* __ASM_DEC_IOASIC_H */
diff --git a/arch/mips/kernel/csrc-ioasic.c b/arch/mips/kernel/csrc-ioasic.c
index 87e88feb4a25..6cbbf6e106b9 100644
--- a/arch/mips/kernel/csrc-ioasic.c
+++ b/arch/mips/kernel/csrc-ioasic.c
@@ -37,7 +37,7 @@ static struct clocksource clocksource_dec = {
         .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-void __init dec_ioasic_clocksource_init(void)
+int __init dec_ioasic_clocksource_init(void)
 {
         unsigned int freq;
         u32 start, end;
@@ -56,8 +56,14 @@ void __init dec_ioasic_clocksource_init(void)
         end = dec_ioasic_hpt_read(&clocksource_dec);
 
         freq = (end - start) * 8;
+
+        /* An early revision of the I/O ASIC didn't have the counter.  */
+        if (!freq)
+                return -ENXIO;
+
         printk(KERN_INFO "I/O ASIC clock frequency %dHz\n", freq);
 
         clocksource_dec.rating = 200 + freq / 10000000;
         clocksource_register_hz(&clocksource_dec, freq);
+        return 0;
 }
diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c
index c2e5d74739b4..5969f1e9b62a 100644
--- a/arch/mips/kernel/smp-cmp.c
+++ b/arch/mips/kernel/smp-cmp.c
@@ -99,7 +99,9 @@ static void cmp_init_secondary(void)
 
         c->core = (read_c0_ebase() >> 1) & 0x1ff;
 #if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
-        c->vpe_id = (read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE;
+        if (cpu_has_mipsmt)
+                c->vpe_id = (read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) &
+                        TCBIND_CURVPE;
 #endif
 #ifdef CONFIG_MIPS_MT_SMTC
         c->tc_id  = (read_c0_tcbind() & TCBIND_CURTC) >> TCBIND_CURTC_SHIFT;
@@ -177,9 +179,16 @@ void __init cmp_smp_setup(void)
         }
 
         if (cpu_has_mipsmt) {
-                unsigned int nvpe, mvpconf0 = read_c0_mvpconf0();
+                unsigned int nvpe = 1;
+#ifdef CONFIG_MIPS_MT_SMP
+                unsigned int mvpconf0 = read_c0_mvpconf0();
+
+                nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
+#elif defined(CONFIG_MIPS_MT_SMTC)
+                unsigned int mvpconf0 = read_c0_mvpconf0();
 
                 nvpe = ((mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1;
+#endif
                 smp_num_siblings = nvpe;
         }
         pr_info("Detected %i available secondary CPU(s)\n", ncpu);
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index faf84c5f2629..59b2b3cd7885 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -1368,7 +1368,7 @@ out_einval:
 }
 static DEVICE_ATTR_RW(ntcs);
 
-static struct attribute vpe_attrs[] = {
+static struct attribute *vpe_attrs[] = {
         &dev_attr_kill.attr,
         &dev_attr_ntcs.attr,
         NULL,
diff --git a/drivers/net/ethernet/amd/declance.c b/drivers/net/ethernet/amd/declance.c
index 3d86ffeb4e15..94edc9c6fbbf 100644
--- a/drivers/net/ethernet/amd/declance.c
+++ b/drivers/net/ethernet/amd/declance.c
@@ -725,6 +725,7 @@ static irqreturn_t lance_dma_merr_int(int irq, void *dev_id)
 {
         struct net_device *dev = dev_id;
 
+        clear_ioasic_dma_irq(irq);
         printk(KERN_ERR "%s: DMA error\n", dev->name);
         return IRQ_HANDLED;
 }