aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/boot/dts/ste-href-tvk1281618.dtsi59
-rw-r--r--arch/arm/boot/dts/ste-hrefv60plus.dtsi24
-rw-r--r--arch/arm/boot/dts/ste-snowball.dts38
3 files changed, 94 insertions, 27 deletions
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
index c40565320978..18b65d1b14f2 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
@@ -88,6 +88,43 @@
88 }; 88 };
89 }; 89 };
90 }; 90 };
91 /* Sensors mounted on this board variant */
92 i2c@80128000 {
93 lsm303dlh@18 {
94 /* Accelerometer */
95 compatible = "st,lsm303dlh-accel";
96 st,drdy-int-pin = <1>;
97 reg = <0x18>;
98 vdd-supply = <&ab8500_ldo_aux1_reg>;
99 vddio-supply = <&db8500_vsmps2_reg>;
100 pinctrl-names = "default";
101 pinctrl-0 = <&accel_tvk_mode>;
102 };
103 lsm303dlm@1e {
104 /* Magnetometer */
105 compatible = "st,lsm303dlm-magn";
106 reg = <0x1e>;
107 vdd-supply = <&ab8500_ldo_aux1_reg>;
108 vddio-supply = <&db8500_vsmps2_reg>;
109 pinctrl-names = "default";
110 pinctrl-0 = <&magneto_tvk_mode>;
111 };
112 l3g4200d@68 {
113 /* Gyroscope */
114 compatible = "st,l3g4200d-gyro";
115 st,drdy-int-pin = <2>;
116 reg = <0x68>;
117 vdd-supply = <&ab8500_ldo_aux1_reg>;
118 vddio-supply = <&db8500_vsmps2_reg>;
119 };
120 lsp001wm@5c {
121 /* Barometer/pressure sensor */
122 compatible = "st,lps001wp-press";
123 reg = <0x5c>;
124 vdd-supply = <&ab8500_ldo_aux1_reg>;
125 vddio-supply = <&db8500_vsmps2_reg>;
126 };
127 };
91 pinctrl { 128 pinctrl {
92 /* Pull up this GPIO pin */ 129 /* Pull up this GPIO pin */
93 tc35893 { 130 tc35893 {
@@ -114,6 +151,28 @@
114 }; 151 };
115 }; 152 };
116 }; 153 };
154 accelerometer {
155 accel_tvk_mode: accel_tvk {
156 /* Accelerometer interrupt lines 1 & 2 */
157 tvk_cfg {
158 ste,pins = "GPIO82_C1", "GPIO83_D3";
159 ste,config = <&gpio_in_pu>;
160 };
161 };
162 };
163 magnetometer {
164 magneto_tvk_mode: magneto_tvk {
165 /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */
166 tvk_cfg1 {
167 ste,pins = "GPIO31_V3";
168 ste,config = <&gpio_in_pu>;
169 };
170 tvk_cfg2 {
171 ste,pins = "GPIO32_V2";
172 ste,config = <&gpio_in_pd>;
173 };
174 };
175 };
117 }; 176 };
118 }; 177 };
119}; 178};
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index c2341061b943..bcc1f0c37f49 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -35,8 +35,6 @@
35 */ 35 */
36 pinctrl-names = "default"; 36 pinctrl-names = "default";
37 pinctrl-0 = <&ipgpio_hrefv60_mode>, 37 pinctrl-0 = <&ipgpio_hrefv60_mode>,
38 <&accel_hrefv60_mode>,
39 <&magneto_hrefv60_mode>,
40 <&etm_hrefv60_mode>, 38 <&etm_hrefv60_mode>,
41 <&nahj_hrefv60_mode>, 39 <&nahj_hrefv60_mode>,
42 <&nfc_hrefv60_mode>, 40 <&nfc_hrefv60_mode>,
@@ -83,28 +81,6 @@
83 }; 81 };
84 }; 82 };
85 }; 83 };
86 accelerometer {
87 accel_hrefv60_mode: accel_hrefv60 {
88 /* Accelerometer interrupt lines 1 & 2 */
89 hrefv60_cfg1 {
90 ste,pins = "GPIO82_C1", "GPIO83_D3";
91 ste,config = <&gpio_in_pu>;
92 };
93 };
94 };
95 magnetometer {
96 magneto_hrefv60_mode: magneto_hrefv60 {
97 /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */
98 hrefv60_cfg1 {
99 ste,pins = "GPIO31_V3";
100 ste,config = <&gpio_in_pu>;
101 };
102 hrefv60_cfg2 {
103 ste,pins = "GPIO32_V2";
104 ste,config = <&gpio_in_pd>;
105 };
106 };
107 };
108 etm { 84 etm {
109 /* 85 /*
110 * Drive D19-D23 for the ETM PTM trace interface low, 86 * Drive D19-D23 for the ETM PTM trace interface low,
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 474ef83229cd..4a2000c620ad 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -241,6 +241,40 @@
241 pinctrl-names = "default","sleep"; 241 pinctrl-names = "default","sleep";
242 pinctrl-0 = <&i2c2_default_mode>; 242 pinctrl-0 = <&i2c2_default_mode>;
243 pinctrl-1 = <&i2c2_sleep_mode>; 243 pinctrl-1 = <&i2c2_sleep_mode>;
244 lsm303dlh@18 {
245 /* Accelerometer */
246 compatible = "st,lsm303dlh-accel";
247 st,drdy-int-pin = <1>;
248 reg = <0x18>;
249 vdd-supply = <&ab8500_ldo_aux1_reg>;
250 vddio-supply = <&db8500_vsmps2_reg>;
251 pinctrl-names = "default";
252 pinctrl-0 = <&accel_snowball_mode>;
253 };
254 lsm303dlm@1e {
255 /* Magnetometer */
256 compatible = "st,lsm303dlm-magn";
257 reg = <0x1e>;
258 vdd-supply = <&ab8500_ldo_aux1_reg>;
259 vddio-supply = <&db8500_vsmps2_reg>;
260 pinctrl-names = "default";
261 pinctrl-0 = <&magneto_snowball_mode>;
262 };
263 l3g4200d@68 {
264 /* Gyroscope */
265 compatible = "st,l3g4200d-gyro";
266 st,drdy-int-pin = <2>;
267 reg = <0x68>;
268 vdd-supply = <&ab8500_ldo_aux1_reg>;
269 vddio-supply = <&db8500_vsmps2_reg>;
270 };
271 lsp001wm@5c {
272 /* Barometer/pressure sensor */
273 compatible = "st,lps001wp-press";
274 reg = <0x5c>;
275 vdd-supply = <&ab8500_ldo_aux1_reg>;
276 vddio-supply = <&db8500_vsmps2_reg>;
277 };
244 }; 278 };
245 279
246 i2c@80110000 { 280 i2c@80110000 {
@@ -361,9 +395,7 @@
361 * can be moved over to being controlled by respective device. 395 * can be moved over to being controlled by respective device.
362 */ 396 */
363 pinctrl-names = "default"; 397 pinctrl-names = "default";
364 pinctrl-0 = <&accel_snowball_mode>, 398 pinctrl-0 = <&gbf_snowball_mode>,
365 <&magneto_snowball_mode>,
366 <&gbf_snowball_mode>,
367 <&wlan_snowball_mode>; 399 <&wlan_snowball_mode>;
368 400
369 ethernet { 401 ethernet {
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-26 01:06:28 -0500